mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-05 06:41:10 +00:00
Compare commits
2
Commits
| Author | SHA1 | Date | |
|---|---|---|---|
 Hanif Koh
|
f01ae28f10 | ||
|
Hanif Koh
|
cca0f61c1b |
@@ -474,7 +474,7 @@ start there when looking for prior art. The sites below are exemplars, cited by
|
||||
data-view cell editors an explicit top-level transient parent.
|
||||
`DropDown::ShouldDismissOnTopWindowDeactivate` handles Wayland chains.
|
||||
- `CheckBox::CheckBox`, `SwitchButton`, `RadioBox`, `ScalableButton` (`wxExtensions.cpp`),
|
||||
`ObjColorDialog`, `PresetComboBoxes` call `RemoveButtonBorder`; `TextInput` and `SpinInput` call
|
||||
`PresetComboBoxes` call `RemoveButtonBorder`; `TextInput` and `SpinInput` call
|
||||
`RemoveInputBorder` on their inner `wxTextCtrl`.
|
||||
- `Plater::priv::priv` together with `sanitize_window_layout_for_wayland`: AUI floating is disabled on
|
||||
Wayland.
|
||||
@@ -812,7 +812,7 @@ widgets do it in their constructors.
|
||||
(`"*.GtkBitmapToggleButton"`, class `"GtkEntry"`). The first call changes every matching widget in
|
||||
the process, not just the one passed in.
|
||||
|
||||
**Callers:** `CheckBox::CheckBox`, `SwitchButton`, `RadioBox`, `ScalableButton`, `ObjColorDialog` and
|
||||
**Callers:** `CheckBox::CheckBox`, `SwitchButton`, `RadioBox`, `ScalableButton` and
|
||||
`PresetComboBoxes` (`RemoveButtonBorder`); the inner `wxTextCtrl` of `TextInput` and `SpinInput`
|
||||
(`RemoveInputBorder`). A new owner-drawn control built on a native GTK widget needs the same call.
|
||||
|
||||
|
||||
@@ -10,6 +10,3 @@
|
||||
# resume after `call :label`. With LF endings that offset can land wrong and the
|
||||
# label lookup fails, so keep these CRLF whatever the platform.
|
||||
*.bat text eol=crlf
|
||||
|
||||
# OCCT BRep fixtures, kept byte for byte as OCCT wrote them.
|
||||
*.brep -text
|
||||
|
||||
+1
-2
@@ -1131,8 +1131,7 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
|
||||
if (NOT OCCT_LIBS)
|
||||
message(FATAL_ERROR "OCCT_LIBS is not set; libslic3r must be configured first.")
|
||||
endif ()
|
||||
string(TOUPPER "${config}" _config_upper)
|
||||
set(_occt_bin "${OCCT_BIN_DIR_${_config_upper}}")
|
||||
set(_occt_bin "${CMAKE_PREFIX_PATH}/bin/occt")
|
||||
set(_occt_dlls "")
|
||||
set(_occt_staged "")
|
||||
set(_missing_occt "")
|
||||
|
||||
Vendored
+264
@@ -0,0 +1,264 @@
|
||||
diff --git a/adm/cmake/occt_defs_flags.cmake b/adm/cmake/occt_defs_flags.cmake
|
||||
index 00000000..00000001 100644
|
||||
--- a/adm/cmake/occt_defs_flags.cmake
|
||||
+++ b/adm/cmake/occt_defs_flags.cmake
|
||||
@@ -134,7 +134,11 @@
|
||||
set (CMAKE_CXX_FLAGS "-std=c++0x ${CMAKE_CXX_FLAGS}")
|
||||
endif()
|
||||
# Optimize size of binaries
|
||||
- set (CMAKE_SHARED_LINKER_FLAGS "-Wl,-s ${CMAKE_SHARED_LINKER_FLAGS}")
|
||||
+ # clang-cl reports the Clang compiler ID, and OCCT builds shared on Windows,
|
||||
+ # where the MSVC-style linker gets this flag as an argument it does not know.
|
||||
+ if (NOT WIN32)
|
||||
+ set (CMAKE_SHARED_LINKER_FLAGS "-Wl,-s ${CMAKE_SHARED_LINKER_FLAGS}")
|
||||
+ endif()
|
||||
elseif(MINGW)
|
||||
add_definitions(-D_WIN32_WINNT=0x0601)
|
||||
# _WIN32_WINNT=0x0601 (use Windows 7 SDK)
|
||||
diff --git a/CMakeLists.txt b/CMakeLists.txt
|
||||
index d98acc0f..28eb8eb4 100644
|
||||
--- a/CMakeLists.txt
|
||||
+++ b/CMakeLists.txt
|
||||
@@ -225,7 +225,7 @@ if (NOT DEFINED INSTALL_DIR_BIN)
|
||||
if ("${INSTALL_DIR_LAYOUT}" STREQUAL "Unix")
|
||||
set (INSTALL_DIR_BIN "bin" CACHE PATH "${INSTALL_DIR_BIN_DESCR}")
|
||||
else()
|
||||
- set (INSTALL_DIR_BIN "${OS_WITH_BIT}/${COMPILER}/bin" CACHE PATH "${INSTALL_DIR_BIN_DESCR}")
|
||||
+ set (INSTALL_DIR_BIN "bin/occt" CACHE PATH "${INSTALL_DIR_BIN_DESCR}")
|
||||
endif()
|
||||
endif()
|
||||
|
||||
@@ -243,11 +243,11 @@ if (NOT DEFINED INSTALL_DIR_LIB)
|
||||
if ("${INSTALL_DIR_LAYOUT}" STREQUAL "Unix")
|
||||
set (INSTALL_DIR_LIB "lib" CACHE PATH "${INSTALL_DIR_LIB_DESCR}")
|
||||
else()
|
||||
- set (INSTALL_DIR_LIB "${OS_WITH_BIT}/${COMPILER}/lib" CACHE PATH "${INSTALL_DIR_LIB_DESCR}")
|
||||
+ set (INSTALL_DIR_LIB "lib/occt" CACHE PATH "${INSTALL_DIR_LIB_DESCR}")
|
||||
endif()
|
||||
endif()
|
||||
|
||||
-# OCCT headers: <prefix>/inc for windows,
|
||||
+# OCCT headers: <prefix>/include for windows,
|
||||
# <prefix>/include/opencascade-7.0.0 for unix
|
||||
if (NOT DEFINED INSTALL_DIR_INCLUDE)
|
||||
if ("${INSTALL_DIR_LAYOUT}" STREQUAL "Unix")
|
||||
@@ -256,7 +256,7 @@ if (NOT DEFINED INSTALL_DIR_INCLUDE)
|
||||
set (INSTALL_DIR_INCLUDE "include/opencascade-${OCC_VERSION_STRING_EXT}" CACHE PATH "${INSTALL_DIR_INCLUDE_DESCR}" FORCE)
|
||||
endif()
|
||||
else()
|
||||
- set (INSTALL_DIR_INCLUDE "inc" CACHE PATH "${INSTALL_DIR_INCLUDE_DESCR}")
|
||||
+ set (INSTALL_DIR_INCLUDE "include/occt" CACHE PATH "${INSTALL_DIR_INCLUDE_DESCR}")
|
||||
endif()
|
||||
endif()
|
||||
|
||||
@@ -330,7 +330,7 @@ if (NOT DEFINED INSTALL_DIR_CMAKE)
|
||||
set (INSTALL_DIR_CMAKE "lib/cmake/opencascade" CACHE PATH "${INSTALL_DIR_CMAKE_DESCR}")
|
||||
endif()
|
||||
else()
|
||||
- set (INSTALL_DIR_CMAKE "cmake" CACHE PATH "${INSTALL_DIR_CMAKE_DESCR}")
|
||||
+ set (INSTALL_DIR_CMAKE "lib/cmake/occt" CACHE PATH "${INSTALL_DIR_CMAKE_DESCR}")
|
||||
endif()
|
||||
endif()
|
||||
|
||||
@@ -338,13 +338,13 @@ endif()
|
||||
OCCT_INCLUDE_CMAKE_FILE ("adm/cmake/occt_resources")
|
||||
|
||||
# install LICENSE_LGPL_21.txt and OCCT_LGPL_EXCEPTION.txt files
|
||||
-if ("${INSTALL_DIR_LAYOUT}" STREQUAL "Unix")
|
||||
- OCCT_INSTALL_FILE_OR_DIR ("LICENSE_LGPL_21.txt" "${INSTALL_DIR_DOC}")
|
||||
- OCCT_INSTALL_FILE_OR_DIR ("OCCT_LGPL_EXCEPTION.txt" "${INSTALL_DIR_DOC}")
|
||||
-else()
|
||||
- OCCT_INSTALL_FILE_OR_DIR ("LICENSE_LGPL_21.txt" ".")
|
||||
- OCCT_INSTALL_FILE_OR_DIR ("OCCT_LGPL_EXCEPTION.txt" ".")
|
||||
-endif()
|
||||
+#if ("${INSTALL_DIR_LAYOUT}" STREQUAL "Unix")
|
||||
+# OCCT_INSTALL_FILE_OR_DIR ("LICENSE_LGPL_21.txt" "${INSTALL_DIR_DOC}")
|
||||
+# OCCT_INSTALL_FILE_OR_DIR ("OCCT_LGPL_EXCEPTION.txt" "${INSTALL_DIR_DOC}")
|
||||
+#else()
|
||||
+# OCCT_INSTALL_FILE_OR_DIR ("LICENSE_LGPL_21.txt" ".")
|
||||
+# OCCT_INSTALL_FILE_OR_DIR ("OCCT_LGPL_EXCEPTION.txt" ".")
|
||||
+#endif()
|
||||
|
||||
if(APPLE)
|
||||
set (INSTALL_NAME_DIR "" CACHE STRING "install_name library suffix on OS X (e.g. @executable_path/../Frameworks)")
|
||||
@@ -850,34 +850,34 @@ endif()
|
||||
|
||||
# build directories
|
||||
if (SINGLE_GENERATOR)
|
||||
- set (CMAKE_ARCHIVE_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/lib${BIN_LETTER}")
|
||||
- set (CMAKE_RUNTIME_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bin${BIN_LETTER}")
|
||||
- set (CMAKE_LIBRARY_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/lib${BIN_LETTER}")
|
||||
+ set (CMAKE_ARCHIVE_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/lib/occt")
|
||||
+ set (CMAKE_RUNTIME_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/bin/occt")
|
||||
+ set (CMAKE_LIBRARY_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/lib/occt")
|
||||
if (WIN32)
|
||||
- set (CMAKE_LIBRARY_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bin${BIN_LETTER}")
|
||||
+ set (CMAKE_LIBRARY_OUTPUT_DIRECTORY "${CMAKE_BINARY_DIR}/bin/occt")
|
||||
endif()
|
||||
endif()
|
||||
|
||||
-set (CMAKE_ARCHIVE_OUTPUT_DIRECTORY_RELEASE "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/lib")
|
||||
-set (CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELEASE "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
|
||||
-set (CMAKE_LIBRARY_OUTPUT_DIRECTORY_RELEASE "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/lib")
|
||||
+set (CMAKE_ARCHIVE_OUTPUT_DIRECTORY_RELEASE "${CMAKE_BINARY_DIR}/lib/occt")
|
||||
+set (CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELEASE "${CMAKE_BINARY_DIR}/bin/occt")
|
||||
+set (CMAKE_LIBRARY_OUTPUT_DIRECTORY_RELEASE "${CMAKE_BINARY_DIR}/lib/occt")
|
||||
|
||||
-set (CMAKE_ARCHIVE_OUTPUT_DIRECTORY_RELWITHDEBINFO "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/libi")
|
||||
-set (CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELWITHDEBINFO "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bini")
|
||||
-set (CMAKE_LIBRARY_OUTPUT_DIRECTORY_RELWITHDEBINFO "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/libi")
|
||||
+set (CMAKE_ARCHIVE_OUTPUT_DIRECTORY_RELWITHDEBINFO "${CMAKE_BINARY_DIR}/lib/occt/RelWithDebInfo")
|
||||
+set (CMAKE_RUNTIME_OUTPUT_DIRECTORY_RELWITHDEBINFO "${CMAKE_BINARY_DIR}/bin/occt/RelWithDebInfo")
|
||||
+set (CMAKE_LIBRARY_OUTPUT_DIRECTORY_RELWITHDEBINFO "${CMAKE_BINARY_DIR}/lib/occt/RelWithDebInfo")
|
||||
|
||||
-set (CMAKE_ARCHIVE_OUTPUT_DIRECTORY_DEBUG "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/libd")
|
||||
-set (CMAKE_RUNTIME_OUTPUT_DIRECTORY_DEBUG "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
|
||||
-set (CMAKE_LIBRARY_OUTPUT_DIRECTORY_DEBUG "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/libd")
|
||||
+set (CMAKE_ARCHIVE_OUTPUT_DIRECTORY_DEBUG "${CMAKE_BINARY_DIR}/lib/occt/Debug")
|
||||
+set (CMAKE_RUNTIME_OUTPUT_DIRECTORY_DEBUG "${CMAKE_BINARY_DIR}/bin/occt/Debug")
|
||||
+set (CMAKE_LIBRARY_OUTPUT_DIRECTORY_DEBUG "${CMAKE_BINARY_DIR}/lib/occt/Debug")
|
||||
|
||||
if (WIN32)
|
||||
- set (CMAKE_LIBRARY_OUTPUT_DIRECTORY_RELEASE "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bin")
|
||||
- set (CMAKE_LIBRARY_OUTPUT_DIRECTORY_RELWITHDEBINFO "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bini")
|
||||
- set (CMAKE_LIBRARY_OUTPUT_DIRECTORY_DEBUG "${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bind")
|
||||
+ set (CMAKE_LIBRARY_OUTPUT_DIRECTORY_RELEASE "${CMAKE_BINARY_DIR}/bin/occt")
|
||||
+ set (CMAKE_LIBRARY_OUTPUT_DIRECTORY_RELWITHDEBINFO "${CMAKE_BINARY_DIR}/bin/occt/RelWithDebInfo")
|
||||
+ set (CMAKE_LIBRARY_OUTPUT_DIRECTORY_DEBUG "${CMAKE_BINARY_DIR}/bin/occt/Debug")
|
||||
endif()
|
||||
|
||||
string(TIMESTAMP CURRENT_TIME "%H:%M:%S")
|
||||
-message (STATUS "\nInfo: \(${CURRENT_TIME}\) Start collecting all OCCT header files into ${CMAKE_BINARY_DIR}/inc ...")
|
||||
+message (STATUS "\nInfo: \(${CURRENT_TIME}\) Start collecting all OCCT header files into ${CMAKE_BINARY_DIR}/include/occt ...")
|
||||
|
||||
# collect all the headers to <binary dir>/inc folder
|
||||
COLLECT_AND_INSTALL_OCCT_HEADER_FILES ("${CMAKE_BINARY_DIR}" "${BUILD_TOOLKITS}" "${CMAKE_SOURCE_DIR}/src" "${INSTALL_DIR_INCLUDE}")
|
||||
@@ -984,9 +984,9 @@ if (EXISTS "${INSTALL_DIR}/${INSTALL_DIR_SCRIPT}/custom.${SCRIPT_EXT}")
|
||||
|
||||
set (CUSTOM_CONTENT "${CUSTOM_CONTENT} ${ADDITIONAL_CUSTOM_CONTENT}")
|
||||
|
||||
- file (WRITE "${INSTALL_DIR}/${INSTALL_DIR_SCRIPT}/custom.${SCRIPT_EXT}" "${CUSTOM_CONTENT}")
|
||||
+ #file (WRITE "${INSTALL_DIR}/${INSTALL_DIR_SCRIPT}/custom.${SCRIPT_EXT}" "${CUSTOM_CONTENT}")
|
||||
else()
|
||||
- OCCT_CONFIGURE_AND_INSTALL ("adm/templates/custom.${SCRIPT_EXT}.main" "custom.${SCRIPT_EXT}" "custom.${SCRIPT_EXT}" "${INSTALL_DIR_SCRIPT}")
|
||||
+ #OCCT_CONFIGURE_AND_INSTALL ("adm/templates/custom.${SCRIPT_EXT}.main" "custom.${SCRIPT_EXT}" "custom.${SCRIPT_EXT}" "${INSTALL_DIR_SCRIPT}")
|
||||
endif()
|
||||
|
||||
if (WIN32)
|
||||
@@ -1007,7 +1007,7 @@ endforeach()
|
||||
|
||||
# write current custom.bat/sh (for install directory)
|
||||
set (SUB_CUSTOM_BUILD_NAME "custom_${COMPILER}_${COMPILER_BITNESS}.install.${SCRIPT_EXT}")
|
||||
-OCCT_CONFIGURE_AND_INSTALL ("adm/templates/custom.install.${SCRIPT_EXT}.in" "${SUB_CUSTOM_BUILD_NAME}" "${SUB_CUSTOM_NAME}" "${INSTALL_DIR_SCRIPT}")
|
||||
+#OCCT_CONFIGURE_AND_INSTALL ("adm/templates/custom.install.${SCRIPT_EXT}.in" "${SUB_CUSTOM_BUILD_NAME}" "${SUB_CUSTOM_NAME}" "${INSTALL_DIR_SCRIPT}")
|
||||
|
||||
# write current custom.bat/sh (for build directory)
|
||||
OCCT_CONFIGURE ("adm/templates/custom.build.${SCRIPT_EXT}.in" "${SUB_CUSTOM_NAME}")
|
||||
@@ -1019,9 +1019,9 @@ endif()
|
||||
|
||||
if (WIN32)
|
||||
# env script for draw in building environment
|
||||
- OCCT_CONFIGURE ("adm/templates/env.${SCRIPT_EXT}.in" "env.${SCRIPT_EXT}")
|
||||
+ #OCCT_CONFIGURE ("adm/templates/env.${SCRIPT_EXT}.in" "env.${SCRIPT_EXT}")
|
||||
# install env script
|
||||
- install (FILES "${CMAKE_BINARY_DIR}/env.${SCRIPT_EXT}" DESTINATION "${INSTALL_DIR_SCRIPT}")
|
||||
+ #install (FILES "${CMAKE_BINARY_DIR}/env.${SCRIPT_EXT}" DESTINATION "${INSTALL_DIR_SCRIPT}")
|
||||
# copy build.bat and install.bat scripts to CMake binary folder
|
||||
OCCT_COPY_FILE_OR_DIR ("adm/templates/build.bat" "${CMAKE_BINARY_DIR}")
|
||||
OCCT_COPY_FILE_OR_DIR ("adm/templates/install.bat" "${CMAKE_BINARY_DIR}")
|
||||
@@ -1043,12 +1043,12 @@ endif()
|
||||
FILE_TO_LIST ("adm/RESOURCES" RESOURCES)
|
||||
foreach(RESOURCE ${RESOURCES})
|
||||
get_filename_component(RESOURCE_FOLDER ${RESOURCE} DIRECTORY)
|
||||
- if(NOT "${RESOURCE_FOLDER}" STREQUAL "")
|
||||
- get_filename_component(RESOURCE_FOLDER ${RESOURCE_FOLDER} NAME)
|
||||
- OCCT_INSTALL_FILE_OR_DIR ("src/${RESOURCE}" "${INSTALL_DIR_RESOURCE}/${RESOURCE_FOLDER}")
|
||||
- else()
|
||||
- OCCT_INSTALL_FILE_OR_DIR ("src/${RESOURCE}" "${INSTALL_DIR_RESOURCE}")
|
||||
- endif()
|
||||
+ #if(NOT "${RESOURCE_FOLDER}" STREQUAL "")
|
||||
+ # get_filename_component(RESOURCE_FOLDER ${RESOURCE_FOLDER} NAME)
|
||||
+ # OCCT_INSTALL_FILE_OR_DIR ("src/${RESOURCE}" "${INSTALL_DIR_RESOURCE}/${RESOURCE_FOLDER}")
|
||||
+ #else()
|
||||
+ # OCCT_INSTALL_FILE_OR_DIR ("src/${RESOURCE}" "${INSTALL_DIR_RESOURCE}")
|
||||
+ #endif()
|
||||
endforeach()
|
||||
|
||||
if (BUILD_SAMPLES_QT)
|
||||
diff --git a/adm/cmake/occt_macros.cmake b/adm/cmake/occt_macros.cmake
|
||||
index 224c96b1..8c94a1c5 100644
|
||||
--- a/adm/cmake/occt_macros.cmake
|
||||
+++ b/adm/cmake/occt_macros.cmake
|
||||
@@ -608,7 +608,7 @@ macro (OCCT_INSERT_CODE_FOR_TARGET)
|
||||
install(CODE "if (\"\${CMAKE_INSTALL_CONFIG_NAME}\" MATCHES \"^([Rr][Ee][Ll][Ee][Aa][Ss][Ee])$\")
|
||||
set (OCCT_INSTALL_BIN_LETTER \"\")
|
||||
elseif (\"\${CMAKE_INSTALL_CONFIG_NAME}\" MATCHES \"^([Rr][Ee][Ll][Ww][Ii][Tt][Hh][Dd][Ee][Bb][Ii][Nn][Ff][Oo])$\")
|
||||
- set (OCCT_INSTALL_BIN_LETTER \"i\")
|
||||
+ set (OCCT_INSTALL_BIN_LETTER \"\")
|
||||
elseif (\"\${CMAKE_INSTALL_CONFIG_NAME}\" MATCHES \"^([Dd][Ee][Bb][Uu][Gg])$\")
|
||||
set (OCCT_INSTALL_BIN_LETTER \"d\")
|
||||
endif()")
|
||||
diff --git a/adm/cmake/occt_toolkit.cmake b/adm/cmake/occt_toolkit.cmake
|
||||
index 550e0e2f..7ac1a3b8 100644
|
||||
--- a/adm/cmake/occt_toolkit.cmake
|
||||
+++ b/adm/cmake/occt_toolkit.cmake
|
||||
@@ -241,7 +241,7 @@
|
||||
else()
|
||||
set (aReleasePdbConf)
|
||||
endif()
|
||||
- install (FILES ${CMAKE_BINARY_DIR}/${OS_WITH_BIT}/${COMPILER}/bin\${OCCT_INSTALL_BIN_LETTER}/${PROJECT_NAME}.pdb
|
||||
+ install (FILES $<TARGET_PDB_FILE:${PROJECT_NAME}>
|
||||
CONFIGURATIONS Debug ${aReleasePdbConf} RelWithDebInfo
|
||||
DESTINATION "${INSTALL_DIR_BIN}\${OCCT_INSTALL_BIN_LETTER}")
|
||||
endif()
|
||||
diff --git a/src/Font/Font_FTFont.cxx b/src/Font/Font_FTFont.cxx
|
||||
index 5ae9899f..0a17372b 100644
|
||||
--- a/src/Font/Font_FTFont.cxx
|
||||
+++ b/src/Font/Font_FTFont.cxx
|
||||
@@ -103,9 +103,11 @@ bool Font_FTFont::Init (const Handle(NCollection_Buffer)& theData,
|
||||
{
|
||||
throw Standard_ProgramError ("Font_FTFont, Light and Normal hinting styles are mutually exclusive");
|
||||
}
|
||||
+#ifdef HAVE_FREETYPE
|
||||
setLoadFlag (FT_LOAD_TARGET_LIGHT, (theParams.FontHinting & Font_Hinting_Light) != 0);
|
||||
setLoadFlag (FT_LOAD_NO_HINTING, (theParams.FontHinting & Font_Hinting_Normal) == 0
|
||||
&& (theParams.FontHinting & Font_Hinting_Light) == 0);
|
||||
+#endif
|
||||
|
||||
// manage native / autohinting
|
||||
if ((theParams.FontHinting & Font_Hinting_ForceAutohint) != 0
|
||||
@@ -113,8 +115,10 @@ bool Font_FTFont::Init (const Handle(NCollection_Buffer)& theData,
|
||||
{
|
||||
throw Standard_ProgramError ("Font_FTFont, ForceAutohint and NoAutohint are mutually exclusive");
|
||||
}
|
||||
+#ifdef HAVE_FREETYPE
|
||||
setLoadFlag (FT_LOAD_FORCE_AUTOHINT, (theParams.FontHinting & Font_Hinting_ForceAutohint) != 0);
|
||||
setLoadFlag (FT_LOAD_NO_AUTOHINT, (theParams.FontHinting & Font_Hinting_NoAutohint) != 0);
|
||||
+#endif
|
||||
|
||||
if (!myFTLib->IsValid())
|
||||
{
|
||||
From 7236e83dcc1e7284e66dc61e612154617ef715d6 Mon Sep 17 00:00:00 2001
|
||||
From: dpasukhi <dpasukhi@opencascade.com>
|
||||
Date: Tue, 27 Aug 2024 11:33:29 +0100
|
||||
Subject: [PATCH] 0033808: Coding - FreeType Use unsigned point and contour
|
||||
indexing in `FT_Outline`
|
||||
|
||||
Changes to auto instead of specific type
|
||||
---
|
||||
src/StdPrs/StdPrs_BRepFont.cxx | 2 +-
|
||||
1 file changed, 1 insertion(+), 1 deletion(-)
|
||||
|
||||
diff --git a/src/StdPrs/StdPrs_BRepFont.cxx b/src/StdPrs/StdPrs_BRepFont.cxx
|
||||
index ab2d9b3c9f..cd701879b1 100644
|
||||
--- a/src/StdPrs/StdPrs_BRepFont.cxx
|
||||
+++ b/src/StdPrs/StdPrs_BRepFont.cxx
|
||||
@@ -457,7 +457,7 @@ Standard_Boolean StdPrs_BRepFont::renderGlyph (const Standard_Utf32Char theChar,
|
||||
for (short aContour = 0, aStartIndex = 0; aContour < anOutline->n_contours; ++aContour)
|
||||
{
|
||||
const FT_Vector* aPntList = &anOutline->points[aStartIndex];
|
||||
- const char* aTags = &anOutline->tags[aStartIndex];
|
||||
+ const auto* aTags = &anOutline->tags[aStartIndex];
|
||||
const short anEndIndex = anOutline->contours[aContour];
|
||||
const short aPntsNb = (anEndIndex - aStartIndex) + 1;
|
||||
aStartIndex = anEndIndex + 1;
|
||||
Vendored
+18
-18
@@ -1,5 +1,5 @@
|
||||
# clang-cl cannot emit some OCCT sources for ARM64 (llvm/llvm-project#62081).
|
||||
# cl and clang-cl share an ABI.
|
||||
# clang-cl cannot emit IGESAppli_GeneralModule.cxx on ARM64
|
||||
# (llvm/llvm-project#62081). cl and clang-cl share an ABI.
|
||||
set(_occt_compiler_args "")
|
||||
if ("${DEPS_ARCH}" STREQUAL "arm64" AND CMAKE_CXX_COMPILER_ID STREQUAL Clang)
|
||||
set(_occt_compiler_args -DCMAKE_C_COMPILER:STRING=cl -DCMAKE_CXX_COMPILER:STRING=cl)
|
||||
@@ -15,31 +15,31 @@ endif()
|
||||
# (fillet/offset/loft), whose only consumer is the parametric Design/CAD tab. With it OFF
|
||||
# the deps prefix matches upstream exactly.
|
||||
#
|
||||
# With it ON OCCT also builds TKFillet (used via BRepFilletAPI), TKOffset (used via
|
||||
# BRepOffsetAPI), and TKFeat, TKHelix, TKXMesh and TKExpress, which nothing here references
|
||||
# but which the module flag builds anyway, since module flags are all-or-nothing. The
|
||||
# module's other toolkits are built either way, because DataExchange (the STEP path)
|
||||
# depends on them.
|
||||
# With it ON the delta is THREE toolkits, not two: TKFillet (7.40 MiB archive, used via
|
||||
# BRepFilletAPI), TKOffset (5.38 MiB, used via BRepOffsetAPI) and TKFeat (4.42 MiB), which
|
||||
# nothing here references but which the module flag builds anyway -- it is all-or-nothing
|
||||
# per module. The module's other nine toolkits are built either way, because DataExchange
|
||||
# (the STEP path upstream already ships) depends on them.
|
||||
#
|
||||
# On macOS/Linux OCCT links statically, so an unreferenced toolkit costs build time and no
|
||||
# shipped bytes. Windows ships only the DLLs libslic3r links, so the tab adds the TKFillet,
|
||||
# TKOffset and TKBool DLLs. See docs/HLSD/design-tab.md.
|
||||
# shipped bytes. The Windows figure is a real DLL cost and has NOT been measured -- an
|
||||
# earlier "3.77 MiB, Windows only" note here covered only two of the three toolkits and is
|
||||
# not a number to quote. See docs/HLSD/design-tab.md.
|
||||
|
||||
if (IN_GIT_REPO)
|
||||
set(OCCT_DIRECTORY_FLAG --directory ${BINARY_DIR_REL}/dep_OCCT-prefix/src/dep_OCCT)
|
||||
endif ()
|
||||
|
||||
orcaslicer_add_cmake_project(OCCT
|
||||
URL https://github.com/Open-Cascade-SAS/OCCT/archive/refs/tags/V8_0_1.zip
|
||||
URL_HASH SHA256=7c033d917ee8f040c0512d289dcc5f02c148889d5bac17c3e25639accb44f0da
|
||||
URL https://github.com/Open-Cascade-SAS/OCCT/archive/refs/tags/V7_6_0.zip
|
||||
URL_HASH SHA256=28334f0e98f1b1629799783e9b4d21e05349d89e695809d7e6dfa45ea43e1dbc
|
||||
#PATCH_COMMAND ${PATCH_CMD} ${CMAKE_CURRENT_LIST_DIR}/0001-OCCT-fix.patch
|
||||
PATCH_COMMAND git apply ${OCCT_DIRECTORY_FLAG} --verbose --ignore-space-change --whitespace=fix ${CMAKE_CURRENT_LIST_DIR}/0001-OCCT-fix.patch
|
||||
#DEPENDS dep_Boost
|
||||
DEPENDS ${FREETYPE_PKG}
|
||||
CMAKE_ARGS
|
||||
-DCMAKE_CXX_STANDARD=17
|
||||
-DBUILD_LIBRARY_TYPE=${library_build_type}
|
||||
# With the Unix layout, OCCT's resources and licenses go under share/ and its scripts
|
||||
# into bin/occt on Windows too. libslic3r finds the CMake package in lib/cmake/occt.
|
||||
-DINSTALL_DIR_LAYOUT=Unix
|
||||
-DINSTALL_DIR_BIN=bin/occt
|
||||
-DINSTALL_DIR_LIB=lib/occt
|
||||
-DINSTALL_DIR_INCLUDE=include/occt
|
||||
-DINSTALL_DIR_CMAKE=lib/cmake/occt
|
||||
-DUSE_TK=OFF
|
||||
-DUSE_TBB=OFF
|
||||
#-DUSE_FREETYPE=OFF
|
||||
|
||||
@@ -75,19 +75,6 @@ static FILE *stl_open_count_facets(stl_file *stl, const char *file, unsigned int
|
||||
break;
|
||||
}
|
||||
}
|
||||
// Zero normals and coordinates like 10 or 15 have no byte above 127, so the test above can miss a binary file.
|
||||
// Its size still matches its facet count; text read as that count would need a file of gigabytes.
|
||||
if (stl->stats.type == ascii) {
|
||||
uint32_t header_num_facets;
|
||||
fseek(fp, custom_header_length, SEEK_SET);
|
||||
if (fread(&header_num_facets, sizeof(uint32_t), 1, fp) == 1) {
|
||||
#if BOOST_ENDIAN_BIG_BYTE
|
||||
stl_internal_reverse_quads((char*)&header_num_facets, 4);
|
||||
#endif /* BOOST_ENDIAN_BIG_BYTE */
|
||||
if (header_size + uint64_t(header_num_facets) * SIZEOF_STL_FACET == file_size)
|
||||
stl->stats.type = binary;
|
||||
}
|
||||
}
|
||||
rewind(fp);
|
||||
|
||||
uint32_t num_facets = 0;
|
||||
|
||||
@@ -1111,27 +1111,7 @@ private:
|
||||
default: ; // DONT_ALIGN
|
||||
}
|
||||
|
||||
auto d = cb - ci;
|
||||
|
||||
// Keep the pile on the bin. A target near an edge (a belt printer starts its parts
|
||||
// at the leading end of the belt) would otherwise centre a pile that is larger than
|
||||
// the room around that point on it and push part of the pile off the bed. The pile
|
||||
// stops at the edge instead; the items' boxes carry their inflation, which is the
|
||||
// margin left there. A pile that does not fit along an axis is centred on it.
|
||||
{
|
||||
auto on_bin = [](Coord lo, Coord hi, Coord bin_lo, Coord bin_hi, Coord shift) {
|
||||
if (hi - lo >= bin_hi - bin_lo)
|
||||
return (bin_lo + bin_hi) / 2 - (lo + hi) / 2;
|
||||
if (lo + shift < bin_lo)
|
||||
shift = bin_lo - lo;
|
||||
if (hi + shift > bin_hi)
|
||||
shift = bin_hi - hi;
|
||||
return shift;
|
||||
};
|
||||
setX(d, on_bin(getX(bb.minCorner()), getX(bb.maxCorner()), getX(bbin.minCorner()), getX(bbin.maxCorner()), getX(d)));
|
||||
setY(d, on_bin(getY(bb.minCorner()), getY(bb.maxCorner()), getY(bbin.minCorner()), getY(bbin.maxCorner()), getY(d)));
|
||||
cb = ci + d;
|
||||
}
|
||||
auto d = cb - ci;
|
||||
|
||||
// BBS make sure the item won't clash with excluded regions
|
||||
// do we have wipe tower after arranging?
|
||||
|
||||
@@ -51,13 +51,14 @@ widens the existing OCCT build by one module flag in `deps/OCCT/OCCT.cmake`:
|
||||
-DBUILD_MODULE_ModelingAlgorithms=${SLIC3R_CAD}
|
||||
```
|
||||
|
||||
Most of that module's toolkits are built either way, because `DataExchange`, which the STEP
|
||||
importer uses, depends on them. With the flag on, OCCT also builds `TKFillet` (used through
|
||||
`BRepFilletAPI`), `TKOffset` (`BRepOffsetAPI`), and `TKFeat`, `TKHelix`, `TKXMesh` and
|
||||
`TKExpress`, which nothing here references but which the module flag builds anyway, because
|
||||
OCCT's module flags are all-or-nothing. On macOS and Linux OCCT links statically, so an
|
||||
unreferenced toolkit costs build time and no shipped bytes. On Windows OCCT builds shared and
|
||||
only the linked toolkits ship, so the tab adds the `TKFillet`, `TKOffset` and `TKBool` DLLs.
|
||||
Most of that module's twelve toolkits were already being built, because `DataExchange` — the
|
||||
STEP path upstream ships — depends on them. The delta is `TKFillet` (used through
|
||||
`BRepFilletAPI`), `TKOffset` (`BRepOffsetAPI`) and `TKFeat`, which nothing here references but
|
||||
which the module flag builds anyway, because OCCT's module flags are all-or-nothing. On macOS
|
||||
and Linux OCCT links statically, so an unreferenced toolkit costs build time and no shipped
|
||||
bytes; on Windows OCCT builds shared, so the cost there is real DLL bytes. That Windows figure
|
||||
has not been measured, and `OCCT.cmake` says so rather than carrying a number that was derived
|
||||
from an incomplete toolkit list.
|
||||
|
||||
On Windows the packaging step asserts that every linked OCCT toolkit has a shipped DLL and
|
||||
fails the configure with the name of any that is missing, because the alternative failure — a
|
||||
@@ -116,8 +117,6 @@ that keep it survivable are:
|
||||
`Import` features embed the imported solid as an OCCT BRep string inside the recipe rather than
|
||||
referencing the source file, so a project opens without the STEP or mesh it was built from.
|
||||
The cost is that saved projects are coupled to an OCCT BRep revision.
|
||||
`tests/data/cad_brep_occt76.brep` holds a solid written by OCCT 7.6, and its test fails if the
|
||||
bundled OCCT can no longer read it.
|
||||
|
||||
## The interaction contract
|
||||
|
||||
|
||||
+183
-529
@@ -2,584 +2,238 @@
|
||||
|
||||
## Purpose and scope
|
||||
|
||||
Precise Seam lets a helper volume decide where the seam of an object goes. The
|
||||
user attaches a mesh to an object as a Precise Seam modifier. On every layer,
|
||||
the part of the external perimeter that lies inside the modifier's slice
|
||||
determines where the seam must, may or must not be placed. The helper is a
|
||||
persistent model object rather than paint on the surface, so it keeps working
|
||||
when the design changes. A body swept along a path on the surface can guide the
|
||||
seam along any trajectory.
|
||||
Precise Seam places the seam where a helper volume intersects the external
|
||||
wall. The user attaches a mesh to an object as a Precise Seam modifier, and on
|
||||
every layer the seam placer reads the modifier's slice to decide where the seam
|
||||
of each external perimeter may, must or must not go. The same mesh keeps
|
||||
working after the model changes, so the seam does not have to be repainted
|
||||
after every design revision, and a swept helper body can guide the seam along
|
||||
any path.
|
||||
|
||||
The modifier is non-printing geometry. It takes no part in object slicing,
|
||||
region assignment, filament selection or brim adhesion, and it affects only seam
|
||||
placement during G-code export. Objects without Precise Seam volumes follow the
|
||||
regular seam placement unchanged.
|
||||
The modifier is non-printing geometry. It does not take part in slicing, region
|
||||
assignment, filament selection or brim adhesion. It affects only seam
|
||||
placement, which runs during G-code export.
|
||||
|
||||
Precise Seam does not replace the seam placer. It feeds it: a modifier inserts
|
||||
the points it needs into the perimeter and changes the enforced/blocked type of
|
||||
seam candidates, the same typing mechanism as seam painting, and the configured
|
||||
seam position then chooses among them.
|
||||
## Volume types and priority
|
||||
|
||||
## Modifier types
|
||||
|
||||
Precise Seam adds six `ModelVolumeType` values after `SUPPORT_ENFORCER`, strong
|
||||
types first and weak types after them. `is_precise_seam()`,
|
||||
Precise Seam adds six `ModelVolumeType` values after `SUPPORT_ENFORCER`. The
|
||||
strong types come first and the weak types follow. `is_precise_seam()`,
|
||||
`is_precise_seam_strong()` and `is_precise_seam_weak()` are range checks that
|
||||
depend on this order.
|
||||
|
||||
| Type | Group | Effect on an intersected perimeter |
|
||||
| Type | Group | Effect on the perimeter |
|
||||
| --- | --- | --- |
|
||||
| `PRECISE_SEAM_CENTER` | strong | seam at the midpoint, by arc length, of the intersection |
|
||||
| `PRECISE_SEAM_CENTER` | strong | seam at the arc-length midpoint of the intersection |
|
||||
| `PRECISE_SEAM_LEFT` | strong | seam at the first point of the intersection |
|
||||
| `PRECISE_SEAM_RIGHT` | strong | seam at the last point of the intersection |
|
||||
| `PRECISE_SEAM_ENFORCED` | weak | intersection marked as enforced |
|
||||
| `PRECISE_SEAM_BLOCKED` | weak | intersection marked as blocked |
|
||||
| `PRECISE_SEAM_NEUTRAL` | weak | intersection reset to neutral |
|
||||
|
||||
A strong modifier fixes a single point. The perimeter gets exactly one enforced
|
||||
seam candidate there, and every other candidate is blocked. A weak modifier
|
||||
retypes, and where needed adds, the candidates inside its intersection, like
|
||||
painting does.
|
||||
|
||||
An **intersection** is a continuous part of the external perimeter's centerline
|
||||
that lies inside the modifier's slice on that layer. It is a portion of the
|
||||
perimeter, never a chord through the object. The centerline lies half an
|
||||
extrusion width inside the model surface and depends on print settings, so a
|
||||
modifier must reach clearly past the surface to cross it unambiguously.
|
||||
|
||||
### Terms
|
||||
|
||||
- **Segment:** an intersection as the code represents it (`PerimeterSegment`).
|
||||
User-facing texts call it an intersection.
|
||||
- **Fragment:** a piece of the perimeter returned by clipping, before it is tied
|
||||
to the source contour.
|
||||
- **Interval:** the bound part of one source edge, given by the edge index and a
|
||||
parameter range on that edge.
|
||||
- **Zone:** a weak segment with its type (Enforced, Blocked or Neutral).
|
||||
- **Boundary:** an end of a zone, inserted into the perimeter polygon.
|
||||
- **Candidate:** a seam candidate of the seam placer, built from the points of
|
||||
the processed perimeter polygon (painted enforcers may add more).
|
||||
|
||||
First and last are taken along the perimeter oriented counter-clockwise as seen
|
||||
from above. On an outer wall seen from outside, Left is therefore the left end
|
||||
of the intersection. On the wall of a hole seen from inside the hole, the two
|
||||
ends are swapped. Mirroring an object does not mirror the mode: perimeters stay
|
||||
counter-clockwise, so Left remains the left end seen from outside, and the seam
|
||||
moves to the other end of the modifier instead of following the mirrored model.
|
||||
|
||||
## Priority
|
||||
A strong modifier fixes one point. A weak modifier only changes the
|
||||
enforced/blocked type of seam candidates, and the configured seam position then
|
||||
chooses among them. First and last are taken along the perimeter made
|
||||
counter-clockwise seen from above. On an outer wall seen from outside, Left is
|
||||
the left end of the intersection. On the wall of a hole seen from inside the
|
||||
hole, the two ends are swapped.
|
||||
|
||||
The order of volumes in the object is the priority order, highest first.
|
||||
`ModelObject::sort_volumes()` keeps every strong modifier before every weak one
|
||||
and preserves the user's order within each group. The object list lets the user
|
||||
drag a modifier only within its own group. A type change that crosses the group
|
||||
boundary moves the volume to the end of its new group, with the lowest priority
|
||||
there.
|
||||
drag a modifier only within its own group. A type change that crosses a group
|
||||
boundary moves the volume to the end of its new group, where it has the lowest
|
||||
priority. Strong modifiers are tried in this order, and the first one that
|
||||
yields a seam on a perimeter wins. Weak modifiers are applied from the lowest
|
||||
priority to the highest, so the highest one overwrites any overlapping zone.
|
||||
|
||||
- **Strong:** modifiers are tried in priority order on each perimeter. The first
|
||||
one that yields a usable segment decides the seam. Within that modifier the
|
||||
longest segment wins; lengths are never compared across modifiers. Once a
|
||||
strong point is placed, no later strong modifier and no weak modifier is
|
||||
processed for that perimeter.
|
||||
- **Weak:** every weak modifier applies. They are applied from the lowest
|
||||
priority to the highest, so the highest one overwrites overlapping zones. A
|
||||
Blocked modifier that fully contains a perimeter is the exception: it is
|
||||
skipped there (see [Full containment](#full-containment)).
|
||||
## Model storage and 3MF compatibility
|
||||
|
||||
A strong modifier without a usable segment, even one whose fragments were all
|
||||
discarded, passes the turn to the next one.
|
||||
|
||||
## Data flow
|
||||
|
||||
1. **Invalidation.** `Print::apply()` treats a change of Precise Seam volumes as
|
||||
a change of seam placement and invalidates G-code export; the object is not
|
||||
resliced (see [Print invalidation](#print-invalidation)).
|
||||
2. **Modifier slices.** `SeamPlacer::init()` collects each object's Precise Seam
|
||||
volumes once, slices every volume separately and caches its regions with
|
||||
their bounding boxes.
|
||||
3. **Perimeters.** Seam candidates are gathered in parallel over the layers.
|
||||
For objects with Precise Seam volumes, each external perimeter polygon is
|
||||
normalized and prepared once for all modifiers.
|
||||
4. **Extraction.** For each modifier, the perimeter is clipped against the
|
||||
modifier's regions on that layer. The clipped fragments are bound back to the
|
||||
source edges of the perimeter and assembled into segments.
|
||||
5. **Strong, then weak.** Strong modifiers try to insert one seam point into the
|
||||
perimeter polygon. If none succeeds, weak modifiers insert their zone
|
||||
boundaries and subdivide enforced edges.
|
||||
6. **Candidates.** The seam placer builds candidates from the modified polygon.
|
||||
Painting assigns types first, weak zones overwrite them, and a strong point
|
||||
makes its candidate the only enforced one.
|
||||
7. **Selection and restoration.** The configured seam position chooses the
|
||||
seams and aligns them. Afterwards the exact strong points are restored.
|
||||
8. **Warnings.** After all objects are processed, `SeamPlacer::init()` prepares
|
||||
one combined warning text if any problem was found; G-code export issues it.
|
||||
|
||||
## Modifier slices
|
||||
|
||||
`init_precise_seam_data()` collects the Precise Seam volumes of each object:
|
||||
strong ones in priority order and weak ones in reverse, so that weak zones can
|
||||
be applied with last-write-wins. Each volume is sliced separately with
|
||||
`PrintObject::slice_single_volume_regions()`, at the object's layer heights and
|
||||
with the same centered transformation as the object. The slices keep every
|
||||
region's outer contour together with its holes as an `ExPolygon`. Volumes are
|
||||
not merged, so each keeps its own priority, and a modifier may have several
|
||||
regions on one layer.
|
||||
|
||||
`prepare_modifier_slices()` moves the slices into `ModifierRegionsCache`,
|
||||
pairing each region with the bounding box of its exterior. Empty layers keep
|
||||
their slots, so the cache is indexed by object layer; `Layer::id()` includes raft
|
||||
layers, which are subtracted. The cache is filled before candidates are gathered
|
||||
and is only read afterwards, shared by both modifier kinds and all worker
|
||||
threads without locking.
|
||||
|
||||
## Perimeter preparation
|
||||
|
||||
The seam placer works on external perimeter loops, including the walls of
|
||||
holes. For objects with Precise Seam volumes, consecutive duplicate points and
|
||||
the repeated closing point of each extrusion loop are removed: adjacent
|
||||
extrusion paths share endpoints, and the resulting zero-length edges would
|
||||
prevent point insertion at their junctions. Distinct visits to one point of a
|
||||
self-touching contour are kept. Objects without Precise Seam volumes keep their
|
||||
original points, so ordinary seam candidates are unaffected.
|
||||
|
||||
Each polygon is made counter-clockwise. A single `PreparedPerimeter` is then
|
||||
built for all modifiers of that perimeter. It holds a validity check (at least
|
||||
three points, no consecutive or closing duplicates), the bounding box, and the
|
||||
clipping line: the polygon as an open polyline with its first point repeated at
|
||||
the end. The preparation borrows the polygon and is used only while the polygon
|
||||
is unchanged: strong processing returns immediately after inserting its point,
|
||||
and weak processing collects all segments before it inserts anything. An
|
||||
invalid perimeter receives no Precise Seam processing.
|
||||
|
||||
## Segment extraction
|
||||
|
||||
`extract_perimeter_segments()` turns one modifier's regions on one layer into
|
||||
segments of the perimeter, each with its geometry and its position on the
|
||||
source contour. Both modifier kinds consume these segments; the extractor is
|
||||
told the modifier type so that it prepares only the data that type needs.
|
||||
|
||||
### Clipping
|
||||
|
||||
Regions whose bounding box does not overlap the perimeter's are skipped. The
|
||||
clipping line is intersected with each remaining region by `intersection_pl()`,
|
||||
which clips an open path against an `ExPolygon` with its holes attached, using
|
||||
the nonzero rule. Clipping an open line yields only pieces of the perimeter, so
|
||||
a modifier crossing the whole object produces two separate pieces rather than a
|
||||
chord through the body. Holes in a modifier and several regions of one modifier
|
||||
simply produce more pieces. The line is cut at vertex zero, so a piece crossing
|
||||
that vertex arrives as two fragments. A border that only touches the line can
|
||||
come back as a single point; such fragments carry no coverage and are dropped
|
||||
before binding.
|
||||
|
||||
### Binding fragments to source edges
|
||||
|
||||
Clipper returns coordinates only. Insertion needs the source edge of every
|
||||
point, and coordinates alone are ambiguous where a contour visits the same
|
||||
point twice. Each fragment is therefore bound to the source edges it covers,
|
||||
producing intervals: an edge index with a parameter range on that edge.
|
||||
|
||||
- **Exact path.** For fragments with interior points, the second point is used
|
||||
as an anchor that must equal a source vertex exactly. Clipping keeps the
|
||||
vertices of an open path unchanged, including collinear ones. The following
|
||||
points must match successive source vertices in either direction; later
|
||||
occurrences of the anchor are tried if a sequence does not match. Only the two
|
||||
end cuts are projected onto their edges.
|
||||
- **Projection path.** Two-point fragments, and fragments the exact path cannot
|
||||
match, are bound by projection. The first source edge that holds both points
|
||||
of the first pair, with distinct parameters, establishes the edge and
|
||||
direction. Every following pair must continue on the same edge or cross to the
|
||||
neighboring edge at their actual shared vertex, in the same direction. A pair
|
||||
continuing on the same edge reuses the previous pair's parameter for their
|
||||
shared point, so the two projections of one point cannot differ.
|
||||
- **Failure.** A fragment that cannot be bound continuously is rolled back and
|
||||
discarded. Earlier fragments and other fragments are unaffected. The failure
|
||||
is counted, logged and reported to the user (see
|
||||
[Diagnostics](#diagnostics-and-warnings)).
|
||||
|
||||
Two rare rounding cases are handled only after both paths have failed, so the
|
||||
normal path never pays for them:
|
||||
|
||||
- **Cut beside a vertex.** When a modifier boundary crosses within about one
|
||||
coordinate unit of a source vertex, Clipper can place the cut at the vertex's
|
||||
height but a few units beside it. The end pair then collapses to the vertex's
|
||||
parameter or misses both neighboring edges. An end cut closer than the
|
||||
snapping radius to a vertex of the fragment's own chain is snapped to that
|
||||
vertex: either its neighbor in the fragment (the cut is a rounded copy of it
|
||||
and is dropped) or a vertex that shares a source edge with that neighbor. The
|
||||
neighbor wins whenever it is within the radius. Ends that are themselves source
|
||||
vertices and ambiguous choices are left unchanged. Binding is then retried
|
||||
once with the same strict rules, so a wrong candidate can only fail again.
|
||||
- **Contact.** A fragment that still fails but is shorter than the snapping
|
||||
radius is accepted as a contact and binds nothing. Insertion would collapse it
|
||||
onto one point anyway.
|
||||
|
||||
Both outcomes are recoveries, not failures: they show no user warning but leave
|
||||
a log marker.
|
||||
|
||||
### Assembling segments
|
||||
|
||||
The intervals are sorted by edge and parameter. Intervals on the same occurrence
|
||||
of an edge are united when they overlap or meet, by parameter or at the same
|
||||
integer point; equal coordinates on different edges are never united. A
|
||||
parameter of 1 is stored as parameter 0 of the next edge, so intervals on
|
||||
adjacent edges meet exactly at their shared vertex. Consecutive intervals that
|
||||
meet form one `PerimeterSegment`, and the last segment is joined with the first
|
||||
when they meet at vertex zero, undoing the artificial cut of the clipping line.
|
||||
|
||||
Each segment keeps its polyline, the source edge of every polyline edge, and its
|
||||
begin and end positions on the source contour.
|
||||
|
||||
### Full containment
|
||||
|
||||
A modifier that covers the whole perimeter has no boundaries on it. The policy
|
||||
follows seam painting, where painting a whole perimeter green is a meaningful
|
||||
choice and forbidding the seam all round is not:
|
||||
|
||||
- **Seam Enforced** types the whole perimeter, like a perimeter painted green all
|
||||
round, with subdivision applied as described under [Weak modifiers](#weak-modifiers).
|
||||
- **Seam Neutral** types the whole perimeter Neutral, like an unmarked perimeter,
|
||||
clearing painting and lower zones.
|
||||
- **Seam Blocked** is skipped for the perimeter, with the full-containment
|
||||
warning. The seam cannot avoid the whole perimeter, so the modifier does not
|
||||
override anything below it: lower zones and painting stay in effect.
|
||||
- **Seam Center, Left and Right** are skipped with the same warning: there is no
|
||||
intersection to place the point on.
|
||||
|
||||
Enforced and Neutral take part in the usual priority order (see
|
||||
[Weak modifiers](#weak-modifiers)).
|
||||
|
||||
The perimeter is fully contained when the united intervals cover every source
|
||||
edge from parameter 0 to 1. A modifier boundary that merely touches the
|
||||
perimeter counts as well:
|
||||
|
||||
- At a vertex or on an axis-aligned edge, clipping splits the line exactly at the
|
||||
touch, the pieces meet at one point, and the coverage is complete.
|
||||
- On an inclined edge the touching point is usually not representable on the
|
||||
integer grid. The boundary pokes a few units across and leaves a real gap, so
|
||||
a single segment covers everything except that gap.
|
||||
|
||||
Weak insertion would collapse such a segment's boundaries onto one vertex and
|
||||
turn the intended zone into a single candidate, and strong would put the seam at
|
||||
the touch. A single segment is therefore also full containment in the cases
|
||||
where insertion collapses it, exactly up to edges shorter than 2 µm:
|
||||
|
||||
- the uncovered length from its end to its begin is below 1 µm, or
|
||||
- the gap spans one vertex, or starts at a vertex and ends on the next edge, and
|
||||
both ends lie within 1 µm of the vertex that ends the first gap edge, since
|
||||
each end then snaps onto it from its own edge.
|
||||
|
||||
A cheap filter runs first: both cases bring the segment's ends within 2 µm of
|
||||
each other.
|
||||
|
||||
## Strong modifiers
|
||||
|
||||
For a strong modifier, the extractor prepares each segment's target point
|
||||
before anything is inserted, together with the source edge it lies on:
|
||||
|
||||
- **Left:** the segment's first point.
|
||||
- **Right:** the segment's last point.
|
||||
- **Center:** the point at half the segment's arc length.
|
||||
|
||||
Arc length is the sum of Euclidean edge lengths, not the chord or a vertex count.
|
||||
|
||||
`insert_strong_seam_point()` selects the longest segment of the first modifier
|
||||
that has one. Exactly equal lengths are resolved by the prepared target points:
|
||||
greater bed Y first, then smaller X; a complete tie keeps the first segment.
|
||||
Slice coordinates already include instance rotation and have the bed axes;
|
||||
centering and XY translation do not change this order. Nearly equal lengths are
|
||||
not treated as equal, so exact ties occur mainly on axis-aligned geometry.
|
||||
Geometrically equal segments, such as a symmetric modifier crossing both faces
|
||||
of a thin wall, differ only by rounding noise that varies between layers, so
|
||||
the chosen face may alternate. This is accepted deliberately: such a modifier is
|
||||
ambiguous by itself: more than one segment raises the "multiple intersections"
|
||||
warning. The user should make the modifier cross the perimeter once.
|
||||
|
||||
The selected point is inserted on its source edge. A point within 1 µm of an
|
||||
existing vertex is snapped to that vertex. Helper points are added 1 µm on both
|
||||
sides of it, except on an adjacent edge shorter than 2 µm, which already bounds
|
||||
the distance.
|
||||
|
||||
When the candidates are built, the candidate at the inserted point is the only
|
||||
enforced one and becomes the central enforcer; every other candidate is blocked.
|
||||
Every seam position mode therefore selects it. Alignment and random placement
|
||||
can still move the final position, so after alignment
|
||||
`restore_precise_seam_positions()` writes the exact point and its index back
|
||||
into every perimeter that has a strong seam.
|
||||
|
||||
## Weak modifiers
|
||||
|
||||
`collect_weak_modifier_segments()` extracts the segments of every weak modifier
|
||||
before the polygon is modified, so all positions refer to the same contour. Each
|
||||
segment becomes a zone with a type and two boundaries, kept in application
|
||||
order, lowest priority first. Full containment of an Enforced or Neutral
|
||||
modifier becomes a whole-perimeter zone at its place in that order: it has no
|
||||
boundaries and takes part in no insertion or helper step below. The boundaries
|
||||
carry their positions on the source contour; these remain as provenance after
|
||||
insertion and are not indices into the modified polygon.
|
||||
|
||||
`prepare_weak_modifier_segments()` then changes the polygon:
|
||||
|
||||
1. **Boundary insertion.** Insertion events are sorted by decreasing source edge
|
||||
and parameter, and the polygon is modified from its end towards its start. A
|
||||
pending boundary's source index therefore stays valid. Vertex zero has the
|
||||
canonical position `(0, 0)` and is
|
||||
processed last, and a point on the closing edge is appended rather than
|
||||
inserted at index zero. A boundary within 1 µm of either endpoint of its
|
||||
current edge, an original vertex or a boundary inserted earlier, is snapped to
|
||||
that point, so coincident boundaries share a vertex. A zone narrower than
|
||||
1 µm collapses into a single vertex.
|
||||
2. **Helper points.** A helper point is added 1 µm outside every boundary,
|
||||
unless the edge there is shorter than 2 µm, which already bounds it. The
|
||||
helpers keep the edges at a boundary short, so a seam placed along such an
|
||||
edge stays close to the boundary. Coincident boundaries share their helpers.
|
||||
3. **Enforced subdivision.** Zone types are resolved for the polygon's edges in
|
||||
priority order. The edges of a zone are those from its left boundary up to,
|
||||
but not including, its right boundary; a whole-perimeter zone types every
|
||||
edge. Enforced edges longer than `SeamPlacer::enforcer_oversampling_distance`
|
||||
(0.2 mm) are subdivided into steps of at most that length; shorter edges and
|
||||
existing vertices are kept.
|
||||
The regular seam placer then chooses the seam as for painted seams.
|
||||
|
||||
When candidates are built, painting assigns their types first.
|
||||
`apply_weak_modifiers_to_perimeter()` then overwrites the types of the
|
||||
candidates between the boundaries of each zone, both boundaries included,
|
||||
lowest priority first; a whole-perimeter zone types every candidate. Blocked
|
||||
and Enforced zones therefore take precedence over painting, and Neutral clears
|
||||
painting inside its zone.
|
||||
|
||||
## Numeric tolerances
|
||||
|
||||
Coordinates are integers in scaled units: 1 nm by default, and 10 nm when a bed
|
||||
larger than 2147 mm switches `SCALING_FACTOR`. Both Precise Seam tolerances are
|
||||
deliberately defined in units rather than physical distances. Clipper truncates
|
||||
cuts to whole units at any scale, so the on-edge tolerance must follow the unit; the
|
||||
snapping radius scales with it to keep its margin over single-precision
|
||||
candidate coordinates, which are coarser on large beds. Distances quoted in
|
||||
this document in nanometers and
|
||||
micrometers assume the default unit; on large printers they are ten times
|
||||
larger. The enforced subdivision step is a physical distance and stays 0.2 mm.
|
||||
|
||||
| Value | Role |
|
||||
| --- | --- |
|
||||
| `MACHINE_PRECISION_SQUARED` (2.5 units², about 1.6 nm) | A point lies on an edge if it is this close. It absorbs Clipper's truncation of cuts to whole units (under √2 units from the edge) and never bridges a real gap: a one-unit uncovered gap stays a gap. |
|
||||
| `TOLERANCE_LINEAR` (1000 units, 1 µm) | Insertion snaps points this close to an existing vertex, and helper points are placed this far from boundaries. The same radius bounds the rounding fallback, contacts and the sub-micron full-containment rule, so those decisions match what insertion would produce anyway. |
|
||||
| `enforcer_oversampling_distance` (0.2 mm) | Maximum step of enforced subdivision. |
|
||||
|
||||
Raising the on-edge tolerance would not help with cuts beside a vertex: more
|
||||
points past a vertex would be clamped to its parameter and collapse. Lowering it
|
||||
would reject ordinary rounded cuts. The snapping radius is kept far above
|
||||
clipping precision for robustness: seam candidates hold single-precision
|
||||
coordinates, whose step is about 8 to 15 nm at typical object coordinates
|
||||
(about 0.25 µm 3 m from the object's centre, on large beds only), and
|
||||
weak boundaries and the strong point are located among the candidates by those
|
||||
coordinates, so distinct points must stay clearly distinct. 1 µm is also far
|
||||
below printing precision.
|
||||
|
||||
## Diagnostics and warnings
|
||||
|
||||
One `PreciseSeamWarnings` instance is shared by all objects and layers of a
|
||||
`SeamPlacer::init()` call. After all objects are processed, `SeamPlacer::init()`
|
||||
prepares at most one warning text, available through `precise_seam_warning()`.
|
||||
G-code export issues it as one non-critical warning with the ID
|
||||
`SlicingPreciseSeamWarning`. It is a single line, "Precise Seam: <causes>. Seam
|
||||
placement may differ from expected.", because the export warnings dialog shows
|
||||
only the first line of each warning. Repeated warning events replace the
|
||||
notification instead of appending to it. Except for the "had no effect" cause,
|
||||
the causes name the modifier types involved, as the menu names them, in menu
|
||||
order and each type once, for example "(Seam Left, Seam Enforced)".
|
||||
The causes are:
|
||||
|
||||
- **failed to process some intersections (types):** at least one fragment was
|
||||
discarded by binding. Other segments remain usable.
|
||||
- **multiple intersections with a perimeter, only one was used (types):**
|
||||
a Seam Center, Left or Right modifier had more than one segment on a
|
||||
perimeter (see [Strong modifiers](#strong-modifiers)).
|
||||
- **a perimeter is fully inside a modifier, the modifier was not applied to it
|
||||
(types):** a Seam Center, Left, Right or Blocked modifier was skipped for a
|
||||
perimeter (see [Full containment](#full-containment)).
|
||||
- **modifier "<name>" of "<object>" had no effect on the seam (it might not reach
|
||||
the centerline of the printed perimeter):** a modifier was evaluated on at
|
||||
least one perimeter and never gave a segment, full containment or a discarded
|
||||
fragment. Only the first such modifier in print and volume order is named,
|
||||
followed by "(N in total)" when there are several.
|
||||
|
||||
Only the effect is certain, so the cause is given as a hint. A modifier is
|
||||
evaluated only when its turn comes: on a perimeter where a higher strong
|
||||
modifier placed the seam, lower strong and all weak modifiers are not
|
||||
evaluated. A modifier that was never evaluated is not reported, since nothing
|
||||
is known about it. A point contact gives no segment and does not count as
|
||||
reaching the perimeter.
|
||||
|
||||
The log records the following diagnostic markers:
|
||||
|
||||
- `[PreciseSeamIntersectionFailed]` for a discarded fragment, with object,
|
||||
modifier, layer, height, fragment and failing pair, the failure reason and
|
||||
point counts.
|
||||
- `[PreciseSeamFragmentRecovered]` for a recovery, with `outcome=bound` or
|
||||
`outcome=contact`, the same location fields and the original failure reason.
|
||||
- `[PreciseSeamNoEffect]` for every modifier of the "had no effect" cause, with
|
||||
the object and modifier names. Unlike the user warning, the log lists all of
|
||||
them.
|
||||
|
||||
Failures and recoveries are counted separately. The first 10 of each per
|
||||
`init()` call are logged in detail, in parallel processing order; if a limit is
|
||||
exceeded, one summary marker reports the total and the number omitted.
|
||||
|
||||
## Known limitations
|
||||
|
||||
- **The modifier must reach the perimeter centerline.** Contacts are taken as
|
||||
clipping returns them, without offsets or tangency rules, so boundaries that
|
||||
only graze the centerline are the user's responsibility. Several near-touches
|
||||
on inclined edges can leave several segments separated by gaps of a few units;
|
||||
their zones then cover nearly the whole perimeter instead of being treated as
|
||||
full containment.
|
||||
- **Self-touching perimeters.** Extraction keeps distinct visits of one
|
||||
coordinate apart through its source-edge bindings, but the consumers locate
|
||||
inserted points by coordinates. A weak zone is typed and subdivided from the
|
||||
first vertex with its boundary coordinate, while boundary helpers are added at
|
||||
every such vertex. A strong point marks every candidate at its coordinate as
|
||||
enforced, and the last one is restored after alignment. If a boundary or a
|
||||
strong point falls exactly on a repeated coordinate, a zone may therefore start
|
||||
from another visit, or the seam may start at another visit of the same point.
|
||||
Carrying visit identity through insertion, refinement, candidates and
|
||||
restoration would touch the whole pipeline, so it is not done for this rare
|
||||
geometry. Overlapping source visits are likewise outside the binding contract.
|
||||
|
||||
## Integration with the application
|
||||
|
||||
### Other seam settings
|
||||
|
||||
- Precise Seam takes part only in outer and hole perimeter seam placement. In
|
||||
spiral vase mode the seam placer is not used for perimeters, so the modifiers
|
||||
have no effect.
|
||||
- Scarf seams, the seam gap and wiping start from the chosen point exactly as
|
||||
they would from an ordinary seam.
|
||||
- Seam painting acts only from model parts, the volumes the seam gizmo shows and
|
||||
edits, and from negative volumes. Painting retained on a volume after a change
|
||||
from part to a Precise Seam, ordinary or support modifier is ignored. A type
|
||||
change back to a model part reactivates any retained painting.
|
||||
Negative volumes keep it on purpose: painting a
|
||||
part and turning it into a negative volume is the only way to paint the wall
|
||||
of the hole it cuts. That painting still affects the seam but is invisible in
|
||||
the gizmo and cannot be edited there; this is known technical debt.
|
||||
If painting them is ever made editable, G-code invalidation must track it too:
|
||||
`model_custom_seam_data_changed()` checks model parts only.
|
||||
|
||||
### Model storage and 3MF compatibility
|
||||
|
||||
Projects must stay readable by earlier releases, and a Precise Seam volume must
|
||||
not change a print there. Both 3MF writers therefore store it as an ordinary
|
||||
parameter modifier: `modifier_part` in the Bambu-format part subtype, and
|
||||
`ParameterModifier` together with the legacy `modifier` flag in the
|
||||
Prusa-format volume metadata. The seam mode is written separately under
|
||||
Projects must stay readable by earlier releases, and the modifier must not
|
||||
change a print there. Both 3MF writers therefore store a Precise Seam volume as
|
||||
an ordinary parameter modifier: `modifier_part` in the Bambu-format part
|
||||
subtype, and `ParameterModifier` together with the legacy `modifier` flag in
|
||||
the Prusa-format volume metadata. The seam mode is written separately under
|
||||
`precise_seam_type`, using the names from `ModelVolume::type_to_string()`
|
||||
(`precise_seam_center` and so on).
|
||||
|
||||
On load, the mode is applied after all other volume metadata, regardless of XML
|
||||
key order, and only when the base type is a modifier. A missing or unknown mode
|
||||
leaves an ordinary modifier, and seam metadata on any other base type is
|
||||
ignored. Files that stored the seam mode directly as the volume type still load.
|
||||
A project saved again by an earlier release loses the seam mode for good: the
|
||||
volumes stay ordinary modifiers without settings.
|
||||
On load, the mode applies after all other volume metadata, regardless of XML
|
||||
key order, and only when the base type is a modifier. Missing or unknown modes
|
||||
leave an ordinary modifier. Seam metadata on any other base type is ignored.
|
||||
Files that stored the seam mode directly as the volume type still load.
|
||||
|
||||
A Precise Seam volume keeps any per-volume settings it had as a part or
|
||||
modifier, but they are inactive and the object list shows no settings item for
|
||||
it. The writers prefix these keys with `precise_seam_config:`, so an earlier
|
||||
reader drops them as unknown options and loads a modifier without settings,
|
||||
which has no effect on the print. The current reader restores the keys only when
|
||||
the volume ends up as a Precise Seam type, so the settings return when the user
|
||||
changes the type back.
|
||||
reader drops them as unknown options. The volume therefore loads there as a
|
||||
modifier without settings and has no effect on the print. The current reader
|
||||
restores the keys only when the volume ends up as a Precise Seam type, so the
|
||||
settings return when the user changes the type back. Configuration values are
|
||||
XML-escaped in both writers, for every volume type.
|
||||
|
||||
### Print invalidation
|
||||
## Print invalidation
|
||||
|
||||
`Print::apply()` compares the Precise Seam volumes of each object by type, ID
|
||||
and transformation. Adding, removing, moving, reordering or retyping one cancels
|
||||
background processing and invalidates only `psGCodeExport`; the sliced layers
|
||||
are kept. `model_volume_list_update_supports_and_seams()` then brings the
|
||||
support and Precise Seam volumes of the print's model copy in line with the new
|
||||
model in one pass. A volume may switch between these two families, since neither
|
||||
affects object slicing; such a switch also changes the support volumes, so the
|
||||
support step is invalidated as well.
|
||||
and transformation. Adding, removing, moving, reordering or retyping one
|
||||
cancels background processing and invalidates only `psGCodeExport`; the sliced
|
||||
layers are kept. `model_volume_list_update_supports_and_seams()` then brings
|
||||
the support and Precise Seam volumes of the print's model copy in line with the
|
||||
new model in one pass. A volume may switch between the two families, since
|
||||
neither affects slicing. A conversion to or from a part or ordinary modifier
|
||||
changes the solid and modifier volume lists and reslices as before.
|
||||
|
||||
A conversion to or from a part or an ordinary modifier changes the solid and
|
||||
modifier volume lists and reslices the object as before. The volume keeps its
|
||||
ID across the type change, so the region cache treats a former support or
|
||||
Precise Seam volume that became a part or modifier as new, since it was never
|
||||
cached.
|
||||
## Modifier slices
|
||||
|
||||
Removing the last helper of a single-part object reslices it, as removing any
|
||||
last modifier would.
|
||||
`SeamPlacer::init()` collects the Precise Seam volumes of each object once:
|
||||
strong ones in priority order and weak ones reversed. It slices each volume
|
||||
separately with `PrintObject::slice_single_volume()`, which shares
|
||||
`slice_modifier_volumes()` with support blockers and enforcers but does not
|
||||
merge volumes, so each keeps its own priority. The result is cached per volume
|
||||
and indexed by object layer; `Layer::id()` includes raft layers, which are
|
||||
subtracted. Seam candidates are then gathered in parallel over the layers and
|
||||
read the cache without locking.
|
||||
|
||||
### User interface
|
||||
Objects without Precise Seam volumes follow the unchanged seam placement path.
|
||||
For objects that have them, perimeter extraction also removes consecutive
|
||||
duplicate points and the repeated closing point of each extrusion loop.
|
||||
Zero-length edges at path junctions would otherwise prevent point insertion
|
||||
there. Distinct visits to one point of a self-touching contour are kept.
|
||||
|
||||
## Finding the wall segment
|
||||
|
||||
The seam placer works on the external perimeter loops of each layer, both
|
||||
outer contours and holes, each made counter-clockwise. For every modifier
|
||||
polygon on the layer that overlaps the perimeter's bounding box, the region
|
||||
enclosed by the perimeter is clipped against the modifier polygon. The boundary
|
||||
of each intersection polygon alternates between runs that follow the perimeter
|
||||
and runs that follow the modifier outline. The wall segment is the longest
|
||||
continuous run of intersection vertices that lie on the perimeter, measured in
|
||||
vertices.
|
||||
|
||||
The fast path first finds an intersection vertex that exactly matches a
|
||||
perimeter vertex. It then walks forward and backward, expecting the adjacent
|
||||
perimeter vertex and falling back to projection when Clipper has merged or
|
||||
split collinear edges. A vertex counts as on the perimeter when its projection
|
||||
is within about 1.6 nm, which covers Clipper's rounding. If no vertex matches
|
||||
exactly, or every vertex lies on the perimeter, the general path projects all
|
||||
vertices. When every vertex is on the perimeter, the edge midpoints are checked
|
||||
instead: a modifier chord can join two perimeter vertices directly, and the
|
||||
chords split the vertex ring into runs. If no edge leaves the perimeter, the
|
||||
perimeter lies entirely inside the modifier.
|
||||
|
||||
`Polygon::point_projection()` optionally reports the edge that holds the
|
||||
projection, and every point of the segment keeps the index of its perimeter
|
||||
edge. New points are inserted on that edge. A point within 1 µm of an existing
|
||||
vertex snaps to that vertex instead.
|
||||
|
||||
## Strong modifiers
|
||||
|
||||
For a strong modifier, the target is the first point, the last point or the
|
||||
arc-length midpoint of the segment. The midpoint is projected back onto the
|
||||
original perimeter, because Clipper may have merged several perimeter edges
|
||||
into one segment edge. The target is inserted into the perimeter, and a helper
|
||||
point is inserted 1 µm before and after it. Strong modifiers are tried in
|
||||
priority order, the first valid intersection decides the seam, and weak
|
||||
modifiers are not processed for that perimeter.
|
||||
|
||||
When candidates are built, the inserted point is the only enforced candidate
|
||||
and becomes the central enforcer; every other candidate is blocked. The seam
|
||||
position modes then pick that point: Aligned and Aligned Back prefer the central
|
||||
enforcer, while Back, Random and Nearest rank enforced candidates above blocked
|
||||
ones. Alignment and random placement can still move the final position along an
|
||||
edge. After alignment, `restore_precise_seam_positions()` writes the exact point
|
||||
and its index back into every perimeter that has a strong seam. Inner walls take
|
||||
their seam from the external seam as usual, including staggering.
|
||||
|
||||
## Weak modifiers
|
||||
|
||||
Weak modifiers produce one segment per intersection polygon, so one modifier can
|
||||
mark several zones on one perimeter. All segment boundaries are inserted into
|
||||
the perimeter in order of decreasing arc length. Each insertion then leaves the
|
||||
indices of the pending, shorter ones unchanged; a point on the closing edge is
|
||||
appended rather than inserted at index zero. A helper point is added 1 µm
|
||||
outside each boundary. Random placement picks a position along the edge that
|
||||
follows a candidate. These helpers keep that edge 1 µm long at each boundary, so
|
||||
a zone cannot extend or intrude further than that. Boundaries that coincide
|
||||
share their helper points.
|
||||
|
||||
The zone types are then resolved in priority order, and the edges of enforced
|
||||
zones are subdivided into steps of at most
|
||||
`SeamPlacer::enforcer_oversampling_distance` (0.2 mm). The middle candidate of
|
||||
the longest enforced patch is therefore close to the geometric middle of the
|
||||
zone. That patch is measured in candidates, across the closing edge, regardless
|
||||
of where the contour starts; the same rule applies to painted seams.
|
||||
|
||||
Candidates first receive their type from seam painting. The weak zones then
|
||||
overwrite it, lowest priority first. Blocked and Enforced zones therefore take
|
||||
precedence over painting, and Neutral clears painting inside its zone.
|
||||
|
||||
## Unsupported geometry and warnings
|
||||
|
||||
Some modifier shapes cannot be resolved to one seam or one zone per crossing.
|
||||
They are detected cheaply and reported rather than guessed:
|
||||
|
||||
- A strong modifier that crosses a perimeter in more than one place uses only
|
||||
its first valid segment. The other crossings are ignored.
|
||||
- A modifier that crosses the whole region enclosed by the perimeter is
|
||||
detected when the modifier outline minus that region leaves more than one
|
||||
piece, none of them a hole. Its intersection holds two wall runs, and only
|
||||
one of them is used.
|
||||
- A modifier whose slice has a hole on a layer, found as a clockwise polygon in
|
||||
the flattened slice, is skipped on that layer. The flattened slice no longer
|
||||
records which hole belongs to which contour.
|
||||
- A perimeter that lies entirely inside a modifier is ignored by that modifier.
|
||||
|
||||
The conditions are atomic flags shared by all layers and objects. After all
|
||||
objects are processed, `SeamPlacer::init()` issues at most one non-critical
|
||||
warning with the ID `SlicingPreciseSeamWarning`. The warning is a single line
|
||||
that lists every cause found, because the export warnings dialog shows only the
|
||||
first line of each warning. Repeated warning events replace this notification
|
||||
instead of appending text to it.
|
||||
|
||||
## User interface
|
||||
|
||||
- *Add Precise Seam* in the object menu creates a Center modifier from a
|
||||
primitive or a loaded mesh. Text and SVG volumes cannot become Precise Seam
|
||||
modifiers: the menu does not offer it, and `ObjectList::set_volume_type()`
|
||||
modifiers: the menu does not offer them, and `ObjectList::set_volume_type()`
|
||||
refuses the change.
|
||||
- *Change Type* has a single *Precise Seam* entry. It converts other volumes to
|
||||
Center and keeps the mode of volumes that are already Precise Seam. The
|
||||
*Precise Seam Type* submenu appears only when every selected item is a Precise
|
||||
Seam volume, including settings rows that resolve to one, and sets the chosen
|
||||
mode on all of them.
|
||||
*Precise Seam Type* submenu appears only when every selected item is a
|
||||
Precise Seam volume, including settings rows that resolve to one. It sets the
|
||||
chosen mode on all selected volumes.
|
||||
- Each mode has its own icon in the object list and its own color in the 3D
|
||||
view, at 60% opacity: warm orange, gold and dark orange for Center, Left and
|
||||
Right; green, red and gray for Enforced, Blocked and Neutral. The three strong
|
||||
colors are close shades of one orange because all three mark strong
|
||||
modifiers; the object list icons tell the modes apart.
|
||||
- Precise Seam volumes have no filament and cannot be pasted into SLA objects.
|
||||
Python plugins see them as `ModelVolumeType` values and through the
|
||||
`is_precise_seam*()` methods.
|
||||
view, at 60% opacity: warm oranges for the strong modes, and green, red and
|
||||
gray for Enforced, Blocked and Neutral.
|
||||
- Object list drops map visible rows to volume indices while skipping hidden
|
||||
cut connectors, and they refresh the row-to-volume map of the object.
|
||||
- Precise Seam volumes have no filament, block pasting into SLA, and are exposed
|
||||
to Python plugins as `ModelVolumeType` values plus the `is_precise_seam*()`
|
||||
methods.
|
||||
|
||||
## Implementation and verification
|
||||
|
||||
- [PreciseSeam.cpp](../../src/libslic3r/GCode/PreciseSeam.cpp) implements the
|
||||
modifier cache, perimeter preparation, segment extraction and binding, strong
|
||||
selection and insertion, weak-zone preparation and application, and position
|
||||
restoration. [PreciseSeam.hpp](../../src/libslic3r/GCode/PreciseSeam.hpp)
|
||||
declares the contracts; [PreciseSeamInternal.hpp](../../src/libslic3r/GCode/PreciseSeamInternal.hpp)
|
||||
exposes the binding internals to tests.
|
||||
- [SeamPlacer.cpp](../../src/libslic3r/GCode/SeamPlacer.cpp) fills the cache,
|
||||
normalizes perimeters, calls both consumers while gathering candidates,
|
||||
restores strong positions after alignment and prepares the warning text, which
|
||||
[GCode.cpp](../../src/libslic3r/GCode.cpp) issues during G-code export.
|
||||
- [PreciseSeam.cpp](../../src/libslic3r/GCode/PreciseSeam.cpp) implements segment
|
||||
detection, point insertion, weak-zone resolution and position restoration.
|
||||
[SeamPlacer.cpp](../../src/libslic3r/GCode/SeamPlacer.cpp) integrates it into
|
||||
candidate gathering and issues the warning.
|
||||
- [Model.hpp](../../src/libslic3r/Model.hpp) defines the types and their order,
|
||||
[PrintApply.cpp](../../src/libslic3r/PrintApply.cpp) handles invalidation, and
|
||||
[PrintObjectSlice.cpp](../../src/libslic3r/PrintObjectSlice.cpp) slices single
|
||||
volumes into structured regions. [bbs_3mf.cpp](../../src/libslic3r/Format/bbs_3mf.cpp)
|
||||
and [3mf.cpp](../../src/libslic3r/Format/3mf.cpp) store them.
|
||||
[PrintObjectSlice.cpp](../../src/libslic3r/PrintObjectSlice.cpp) slices the
|
||||
modifiers. [bbs_3mf.cpp](../../src/libslic3r/Format/bbs_3mf.cpp) and
|
||||
[3mf.cpp](../../src/libslic3r/Format/3mf.cpp) store them.
|
||||
- [GUI_Factories.cpp](../../src/slic3r/GUI/GUI_Factories.cpp) and
|
||||
[GUI_ObjectList.cpp](../../src/slic3r/GUI/GUI_ObjectList.cpp) provide the menus,
|
||||
type changes and ordering; [3DScene.cpp](../../src/slic3r/GUI/3DScene.cpp)
|
||||
defines the colors.
|
||||
- [Segment extraction tests](../../tests/libslic3r/test_precise_seam.cpp) cover
|
||||
clipping and binding: holes and components, contour origin and reversal,
|
||||
repeated coordinates, collinear vertices and rounding, rollback and the
|
||||
diagnostic limits, the rounding fallback on synthetic and real Clipper
|
||||
fragments, contacts, and full containment including touches and sub-micron
|
||||
gaps on inclined edges and around vertices.
|
||||
type changes and ordering.
|
||||
- [Precise Seam tests](../../tests/fff_print/test_precise_seam.cpp) cover the
|
||||
consumers: strong targets in every mode, including a midpoint on an existing
|
||||
vertex or the closing edge, longest-arc selection and tie order in bed axes,
|
||||
priorities, weak boundaries that coincide or share an edge, enforced
|
||||
subdivision, whole-perimeter weak zones with painting and priorities, weak
|
||||
zones over painting's oversampled candidates, the warning type masks, usage
|
||||
tracking for the "had no effect" warning, volume sorting of strong and weak
|
||||
groups, restoration of strong points after alignment, raft layer indexing and
|
||||
structured slices. End-to-end tests slice a real object with Precise Seam
|
||||
volumes and check the outer wall starts in the exported G-code: every strong
|
||||
mode under several seam positions and with a raft, Enforced and Blocked zones,
|
||||
a modifier with a hole, and the user warning.
|
||||
strong positions, including a midpoint on an existing vertex or the closing
|
||||
edge. They also cover shared and coincident weak boundaries, every warning,
|
||||
and the priority order.
|
||||
- [Seam placer tests](../../tests/fff_print/test_seam_placer.cpp) cover
|
||||
enforced-patch selection independent of the contour start, fully painted
|
||||
contours, duplicate removal, and `Print::apply()` synchronization through type
|
||||
changes and restored model snapshots. The duplicate-removal test also checks
|
||||
the "had no effect" warning text prepared by `init()` for a helper that never
|
||||
reaches the loop. Further tests check that adding, moving, retyping or
|
||||
removing a Precise Seam volume invalidates only G-code export, and that seam
|
||||
painting acts only from model parts and negative volumes, including after a
|
||||
type change back to part.
|
||||
contours, duplicate removal, and `Print::apply()` synchronization through
|
||||
type changes and restored model snapshots.
|
||||
- [3MF tests](../../tests/libslic3r/test_precise_seam_3mf.cpp) cover the round
|
||||
trip of every mode and of inactive settings, attribute escaping, and the
|
||||
metadata combinations that restore a seam mode.
|
||||
trip of every mode and of inactive settings, attribute escaping, and which
|
||||
metadata combinations restore a seam mode.
|
||||
[Plugin tests](../../tests/slic3rutils/test_precise_seam_plugin.cpp) cover the
|
||||
Python bindings.
|
||||
|
||||
@@ -1,54 +0,0 @@
|
||||
# Prusa CORE One INDX profiles
|
||||
|
||||
The Prusa bundle provides separate four-tool and eight-tool CORE One INDX models
|
||||
with 0.4 mm high-flow nozzles and a 248 x 205 x 270 mm printable volume. These are
|
||||
independent-tool printers, not single-extruder MMU3 machines. Both inherit
|
||||
`fdm_machine_common_coreone_indx`, which inherits the ordinary CORE One HF
|
||||
printer; the concrete printer presets supply their tool-count-dependent arrays. The bed and wizard resources come from Prusa.
|
||||
|
||||
The source configuration is PrusaResearch 2.5.10 from
|
||||
[Prusa's profile repository](https://github.com/prusa3d/PrusaSlicer-settings-prusa-fff/blob/65c5c8f1e1c3836f306119c49d717759cbc368db/PrusaResearch/2.5.10.ini).
|
||||
Its printer, process and filament settings are translated to Orca option names.
|
||||
The supplied process presets cover 0.10, 0.15, 0.20 and 0.25 mm layers. Their
|
||||
shared `fdm_process_coreone_indx` base inherits the ordinary CORE One HF SPEED
|
||||
process, with explicit INDX differences and layer-specific child settings.
|
||||
Material presets are shared with the ordinary CORE One family.
|
||||
|
||||
## Tool changes and extrusion state
|
||||
|
||||
The start script initializes a persistent `tool_init` vector, counts the tools
|
||||
used by the job, homes and probes using a loaded tool, calibrates the used tools,
|
||||
and primes the initial tool at the cleaning station. The change script preserves
|
||||
Prusa's `G27`, `P0`, `T`, `G12`, `G750` and `M906` sequences. It updates
|
||||
`e_retracted` so Orca's subsequent unretraction agrees with the script's extrusion.
|
||||
Per-tool temperature commands are guarded by `is_extruder_used`.
|
||||
|
||||
The off-bed purge station is the default. With a prime tower enabled, a newly
|
||||
used tool still receives its initial station purge, while an initialized tool
|
||||
uses the source's wipe-tower preparation path. `tool_init` persists across these
|
||||
changes; treating every tool selection as first use would change the purge and
|
||||
deretraction sequence.
|
||||
|
||||
Purge volume uses the filament's minimal purge setting. Orca's optional flush
|
||||
volumetric speed is divided by filament cross-sectional area before it is used
|
||||
as a linear extrusion-speed override. Prusa's separate `filament_flush_volume`
|
||||
override is not available in these profiles. The source's `EXCLUDE_E_START` and
|
||||
`EXCLUDE_E_END` internal markers become comments rather than printer commands.
|
||||
|
||||
Pressure-advance restoration and automatic pressure-advance emission use the
|
||||
selected filament preset's settings. These profiles do not impose machine-owned
|
||||
filament overrides. Dock-fan control retains the source's material and layer
|
||||
conditions; shutdown parks the tool and turns off the used heaters and dock fan.
|
||||
|
||||
## Configuration boundaries
|
||||
|
||||
The scripts use Orca's temperature, retraction, fan and speed option names. The
|
||||
nozzle-check high-flow flag is fixed because these presets describe HF nozzles;
|
||||
the abrasive-material flag is derived from the filament's required nozzle HRC.
|
||||
An unset idle temperature uses Orca's zero sentinel. ABS's source XY shrinkage
|
||||
compensation is represented using Orca's retained-size percentage.
|
||||
|
||||
Prusa's consistent-surface cooling strategy and filament-specific infill crossing
|
||||
speed limits have no direct Orca profile equivalent. These presets use Orca's
|
||||
native layer-time cooling and material volumetric limits. They do not add slicer
|
||||
features or change existing Prusa printer profiles.
|
||||
@@ -22855,28 +22855,3 @@ msgstr ""
|
||||
#: resources/data/hints.ini: [hint:Avoid warping]
|
||||
msgid "Avoid warping\nDid you know that when printing materials that are prone to warping such as ABS, appropriately increasing the heatbed temperature can reduce the probability of warping?"
|
||||
msgstr ""
|
||||
|
||||
#: src/libslic3r/GCode/SeamPlacer.cpp
|
||||
#, possible-boost-format
|
||||
msgid "failed to process some intersections (%1%)"
|
||||
msgstr ""
|
||||
|
||||
#: src/libslic3r/GCode/SeamPlacer.cpp
|
||||
#, possible-boost-format
|
||||
msgid "multiple intersections with a perimeter, only one was used (%1%)"
|
||||
msgstr ""
|
||||
|
||||
#: src/libslic3r/GCode/SeamPlacer.cpp
|
||||
#, possible-boost-format
|
||||
msgid "a perimeter is fully inside a modifier, the modifier was not applied to it (%1%)"
|
||||
msgstr ""
|
||||
|
||||
#: src/libslic3r/GCode/SeamPlacer.cpp
|
||||
#, possible-boost-format
|
||||
msgid "modifier \"%1%\" of \"%2%\" had no effect on the seam (it might not reach the centerline of the printed perimeter)"
|
||||
msgstr ""
|
||||
|
||||
#: src/libslic3r/GCode/SeamPlacer.cpp
|
||||
#, possible-boost-format
|
||||
msgid "modifier \"%1%\" of \"%2%\" (%3% in total) had no effect on the seam (it might not reach the centerline of the printed perimeter)"
|
||||
msgstr ""
|
||||
|
||||
@@ -196,7 +196,6 @@ src/slic3r/GUI/Tab.hpp
|
||||
src/slic3r/GUI/UnsavedChangesDialog.cpp
|
||||
src/slic3r/GUI/Auxiliary.cpp
|
||||
src/slic3r/GUI/UpdateDialogs.cpp
|
||||
src/slic3r/GUI/ObjColorDialog.cpp
|
||||
src/slic3r/GUI/SyncAmsInfoDialog.cpp
|
||||
src/slic3r/GUI/WipeTowerDialog.cpp
|
||||
src/slic3r/GUI/wxExtensions.cpp
|
||||
|
||||
@@ -27362,30 +27362,17 @@ msgstr ""
|
||||
msgid "Precise Seam"
|
||||
msgstr "Точный шов"
|
||||
|
||||
#: src/libslic3r/GCode/SeamPlacer.cpp
|
||||
#, possible-boost-format
|
||||
msgid "failed to process some intersections (%1%)"
|
||||
msgstr "не удалось обработать некоторые пересечения (%1%)"
|
||||
msgid "multiple intersections with a perimeter detected"
|
||||
msgstr "обнаружены множественные пересечения с периметром"
|
||||
|
||||
#: src/libslic3r/GCode/SeamPlacer.cpp
|
||||
#, possible-boost-format
|
||||
msgid "multiple intersections with a perimeter, only one was used (%1%)"
|
||||
msgstr "несколько пересечений с периметром, использовано только одно (%1%)"
|
||||
msgid "modifier fully crosses the printable perimeter"
|
||||
msgstr "модификатор пересекает печатаемый периметр насквозь"
|
||||
|
||||
#: src/libslic3r/GCode/SeamPlacer.cpp
|
||||
#, possible-boost-format
|
||||
msgid "a perimeter is fully inside a modifier, the modifier was not applied to it (%1%)"
|
||||
msgstr "периметр целиком внутри модификатора, модификатор для него не применён (%1%)"
|
||||
msgid "modifier shape is not solid (has holes inside) and was ignored"
|
||||
msgstr "форма модификатора не сплошная (имеет отверстия) и была проигнорирована"
|
||||
|
||||
#: src/libslic3r/GCode/SeamPlacer.cpp
|
||||
#, possible-boost-format
|
||||
msgid "modifier \"%1%\" of \"%2%\" had no effect on the seam (it might not reach the centerline of the printed perimeter)"
|
||||
msgstr "модификатор «%1%» модели «%2%» не повлиял на шов (возможно, он не достигает осевой линии печатаемого периметра)"
|
||||
|
||||
#: src/libslic3r/GCode/SeamPlacer.cpp
|
||||
#, possible-boost-format
|
||||
msgid "modifier \"%1%\" of \"%2%\" (%3% in total) had no effect on the seam (it might not reach the centerline of the printed perimeter)"
|
||||
msgstr "модификатор «%1%» модели «%2%» (всего: %3%) не повлиял на шов (возможно, он не достигает осевой линии печатаемого периметра)"
|
||||
msgid "perimeter is fully contained inside modifier and was ignored"
|
||||
msgstr "периметр полностью содержится внутри модификатора и был проигнорирован"
|
||||
|
||||
msgid "Seam placement may differ from expected."
|
||||
msgstr "Размещение шва может отличаться от ожидаемого."
|
||||
|
||||
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
@@ -1,79 +0,0 @@
|
||||
#!/usr/bin/env python3
|
||||
"""Belt temperature-tower asset generator (discrete-provini design).
|
||||
|
||||
A vertical temperature tower cannot be sliced on a belt printer, so lay a row of
|
||||
DISCRETE provini (one per temperature) along the belt (designed Y) with a fixed
|
||||
surface gap. Each provino is the chevron+arc unit (belt_temp_provino_unit.stl,
|
||||
keel-first); its temperature is ENGRAVED upright into the 50 mm face — a raised
|
||||
number would be an unsupported overhang on the belt. The C++ calib_temp belt branch
|
||||
(Plater.cpp) injects one M104 per zone 70 layers INTO provino i:
|
||||
print_z[i] = i * PITCH * cos(theta) + 70 * layer_height (theta = 45)
|
||||
inside the body, not in the empty inter-provino gap (which has no sliced layers for
|
||||
the event to attach to). PITCH below is the shared geometry contract with that code —
|
||||
keep them in sync.
|
||||
|
||||
Generates one STL per filament temp range used by Temp_Calibration_Dlg.
|
||||
"""
|
||||
import numpy as np, trimesh, os
|
||||
from matplotlib.textpath import TextPath
|
||||
from matplotlib.font_manager import FontProperties
|
||||
from shapely.geometry import Polygon as ShPoly
|
||||
from shapely.ops import unary_union
|
||||
|
||||
HERE = os.path.dirname(os.path.abspath(__file__))
|
||||
UNIT = os.path.join(HERE, 'belt_temp_provino_unit.stl') # single provino, keel-first
|
||||
SURF_GAP = 25.0 # surface-to-surface gap between provini (mm) — user spec
|
||||
TEXT_H = 9.0
|
||||
TEXT_DEPTH = 0.8 # engraving depth (numbers are CUT into the face, not raised:
|
||||
# a raised number is an unsupported Y-overhang on the belt)
|
||||
TEXT_OVERSHOOT = 0.6 # extra height poking out of the face for a clean boolean cut
|
||||
|
||||
# Temperature ranges (start, end) per filament family, 5 C step. File name encodes them.
|
||||
RANGES = [(230,190),(270,230),(250,230),(280,240),(240,210),(320,280)]
|
||||
|
||||
unit = trimesh.load(UNIT)
|
||||
dY = unit.bounds[1,1] - unit.bounds[0,1]
|
||||
PITCH = dY + SURF_GAP # designed-Y pitch == C++ contract constant
|
||||
print(f"unit dY={dY:.2f} PITCH={PITCH:.3f} (C++ contract: print_z[i]=i*{PITCH:.3f}*cos45)")
|
||||
|
||||
# 50 mm face normal (0,-1,1)/sqrt2 ; UPRIGHT basis u=+X det(+1) (verified non-mirrored)
|
||||
n = np.array([0,-1,1.])/np.sqrt(2)
|
||||
u = np.array([1,0,0.]); v = np.array([0,1,1.])/np.sqrt(2)
|
||||
R = np.column_stack([u,v,n])
|
||||
fn = unit.face_normals; fc = unit.triangles_center; fa = unit.area_faces
|
||||
sel = (fn@n) > 0.9
|
||||
face_c = (fc[sel]*fa[sel,None]).sum(0)/fa[sel].sum()
|
||||
|
||||
def text_mesh(s):
|
||||
tp = TextPath((0,0), s, size=TEXT_H, prop=FontProperties(family='DejaVu Sans'))
|
||||
rings = [ShPoly(p) for p in tp.to_polygons() if len(p)>=3]
|
||||
rings.sort(key=lambda r:r.area, reverse=True)
|
||||
used=[False]*len(rings); parts=[]
|
||||
for i,o in enumerate(rings):
|
||||
if used[i]: continue
|
||||
holes=[]
|
||||
for j in range(i+1,len(rings)):
|
||||
if not used[j] and o.contains(rings[j]): holes.append(rings[j].exterior.coords); used[j]=True
|
||||
parts.append(ShPoly(o.exterior.coords,holes)); used[i]=True
|
||||
poly = unary_union(parts)
|
||||
geoms = list(poly.geoms) if poly.geom_type=='MultiPolygon' else [poly]
|
||||
m = trimesh.util.concatenate([trimesh.creation.extrude_polygon(g,height=TEXT_DEPTH+TEXT_OVERSHOOT) for g in geoms])
|
||||
c = m.bounds.mean(axis=0); m.apply_translation([-c[0],-c[1],0]); return m
|
||||
|
||||
for t_start, t_end in RANGES:
|
||||
temps = list(range(t_start, t_end-1, -5))
|
||||
parts=[]
|
||||
for i,T in enumerate(temps):
|
||||
c = unit.copy(); c.apply_translation([0, i*PITCH, 0])
|
||||
t = text_mesh(str(T)); M=np.eye(4); M[:3,:3]=R; t.apply_transform(M)
|
||||
# place the text spanning from TEXT_DEPTH inside the face to TEXT_OVERSHOOT outside,
|
||||
# then CUT it out of the provino (engrave) — no raised material, no Y-overhang.
|
||||
t.apply_translation(face_c - n*TEXT_DEPTH + np.array([0,i*PITCH,0]))
|
||||
c = trimesh.boolean.difference([c, t], engine='manifold')
|
||||
parts.append(c)
|
||||
asset = trimesh.util.concatenate(parts)
|
||||
out = os.path.join(HERE, f"belt_temp_tower_{t_start}_{t_end}.stl")
|
||||
asset.export(out)
|
||||
dims = np.round(asset.bounds[1]-asset.bounds[0],1)
|
||||
wt = all(p.is_watertight for p in parts)
|
||||
print(f" {t_start}->{t_end}: {len(temps)} zones bbox={dims} watertight={wt} -> {os.path.basename(out)}")
|
||||
@@ -1,8 +1,8 @@
|
||||
<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16">
|
||||
<!-- Frame -->
|
||||
<!-- Рамка -->
|
||||
<path d="M0.5,13.5L0.5,1.5C0.5,0.951,0.951,0.5,1.5,0.5L13.5,0.5C14.049,0.5,14.5,0.951,14.5,1.5L14.5,13.5C14.5,14.049,14.049,14.5,13.5,14.5L1.5,14.5C0.951,14.5,0.5,14.049,0.5,13.5Z" style="fill:none;stroke:#949494;stroke-width:1px"/>
|
||||
|
||||
<!-- Dashed seam line, centered -->
|
||||
<!-- Центральные пунктирные линии -->
|
||||
<rect x="7" y="1" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="7" y="3" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="7" y="5" width="1" height="1" style="fill:#009688"/>
|
||||
@@ -11,9 +11,9 @@
|
||||
<rect x="7" y="11" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="7" y="13" width="1" height="1" style="fill:#009688"/>
|
||||
|
||||
<!-- Left arrow -->
|
||||
<path d="M9.5,7.5L12.5,4.5L12.5,10.5Z" style="fill:#949494;stroke:#949494;stroke-width:1px;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:1.5"/>
|
||||
<!-- Правая стрелка -->
|
||||
<path d="M9.5,7.5L12.504,4.504L12.5,10.5L9.5,7.5Z" style="fill:#949494;stroke:#949494;stroke-width:1px;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:1.5"/>
|
||||
|
||||
<!-- Right arrow -->
|
||||
<path d="M5.5,7.5L2.5,4.5L2.5,10.5Z" style="fill:#949494;stroke:#949494;stroke-width:1px;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:1.5"/>
|
||||
<!-- Левая стрелка -->
|
||||
<path d="M5.501928,7.5L2.497928,4.504L2.501928,10.5L5.501928,7.5Z" style="fill:#949494;stroke:#949494;stroke-width:1px;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:1.5"/>
|
||||
</svg>
|
||||
|
||||
|
Before Width: | Height: | Size: 1.2 KiB After Width: | Height: | Size: 1.3 KiB |
@@ -1,16 +1,16 @@
|
||||
<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16">
|
||||
<!-- Frame -->
|
||||
<!-- Рамка -->
|
||||
<path d="M0.5,13.5L0.5,1.5C0.5,0.951,0.951,0.5,1.5,0.5L13.5,0.5C14.049,0.5,14.5,0.951,14.5,1.5L14.5,13.5C14.5,14.049,14.049,14.5,13.5,14.5L1.5,14.5C0.951,14.5,0.5,14.049,0.5,13.5Z" style="fill:none;stroke:#949494;stroke-width:1px"/>
|
||||
|
||||
<!-- Dashed seam line, shifted left -->
|
||||
<rect x="3" y="1" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="3" y="3" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="3" y="5" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="3" y="7" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="3" y="9" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="3" y="11" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="3" y="13" width="1" height="1" style="fill:#009688"/>
|
||||
<!-- Центральные пунктирные линии -->
|
||||
<rect x="7" y="1" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="7" y="3" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="7" y="5" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="7" y="7" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="7" y="9" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="7" y="11" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="7" y="13" width="1" height="1" style="fill:#009688"/>
|
||||
|
||||
<!-- Left arrow -->
|
||||
<path d="M5.5,7.5L8.5,4.5L8.5,10.5Z" style="fill:#949494;stroke:#949494;stroke-width:1px;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:1.5"/>
|
||||
<!-- Правая стрелка -->
|
||||
<path d="M9.5,7.5L12.504,4.504L12.5,10.5L9.5,7.5Z" style="fill:#949494;stroke:#949494;stroke-width:1px;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:1.5"/>
|
||||
</svg>
|
||||
|
||||
|
Before Width: | Height: | Size: 1018 B After Width: | Height: | Size: 1.1 KiB |
@@ -1,16 +1,16 @@
|
||||
<svg xmlns="http://www.w3.org/2000/svg" width="16" height="16" viewBox="0 0 16 16">
|
||||
<!-- Frame -->
|
||||
<!-- Рамка -->
|
||||
<path d="M0.5,13.5L0.5,1.5C0.5,0.951,0.951,0.5,1.5,0.5L13.5,0.5C14.049,0.5,14.5,0.951,14.5,1.5L14.5,13.5C14.5,14.049,14.049,14.5,13.5,14.5L1.5,14.5C0.951,14.5,0.5,14.049,0.5,13.5Z" style="fill:none;stroke:#949494;stroke-width:1px"/>
|
||||
|
||||
<!-- Dashed seam line, shifted right -->
|
||||
<rect x="11" y="1" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="11" y="3" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="11" y="5" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="11" y="7" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="11" y="9" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="11" y="11" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="11" y="13" width="1" height="1" style="fill:#009688"/>
|
||||
<!-- Центральные пунктирные линии -->
|
||||
<rect x="7" y="1" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="7" y="3" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="7" y="5" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="7" y="7" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="7" y="9" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="7" y="11" width="1" height="1" style="fill:#009688"/>
|
||||
<rect x="7" y="13" width="1" height="1" style="fill:#009688"/>
|
||||
|
||||
<!-- Right arrow -->
|
||||
<path d="M9.5,7.5L6.5,4.5L6.5,10.5Z" style="fill:#949494;stroke:#949494;stroke-width:1px;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:1.5"/>
|
||||
<!-- Левая стрелка -->
|
||||
<path d="M5.501928,7.5L2.497928,4.504L2.501928,10.5L5.501928,7.5Z" style="fill:#949494;stroke:#949494;stroke-width:1px;stroke-linecap:round;stroke-linejoin:round;stroke-miterlimit:1.5"/>
|
||||
</svg>
|
||||
|
||||
|
Before Width: | Height: | Size: 1.0 KiB After Width: | Height: | Size: 1.1 KiB |
@@ -1,13 +1,9 @@
|
||||
{
|
||||
"name": "Custom Printer",
|
||||
"version": "02.04.00.08",
|
||||
"version": "02.04.00.07",
|
||||
"force_update": "0",
|
||||
"description": "My configurations",
|
||||
"machine_model_list": [
|
||||
{
|
||||
"name": "Generic Belt Printer",
|
||||
"sub_path": "machine/MyBeltPrinter.json"
|
||||
},
|
||||
{
|
||||
"name": "Generic Klipper Printer",
|
||||
"sub_path": "machine/MyKlipper.json"
|
||||
@@ -54,10 +50,6 @@
|
||||
"name": "0.08mm Extra Fine @MyKlipper",
|
||||
"sub_path": "process/0.08mm Extra Fine @MyKlipper.json"
|
||||
},
|
||||
{
|
||||
"name": "0.12mm Fine @MyBeltPrinter",
|
||||
"sub_path": "process/0.12mm Fine @MyBeltPrinter.json"
|
||||
},
|
||||
{
|
||||
"name": "0.12mm Fine @MyKlipper",
|
||||
"sub_path": "process/0.12mm Fine @MyKlipper.json"
|
||||
@@ -70,10 +62,6 @@
|
||||
"name": "0.16mm Optimal @MyKlipper",
|
||||
"sub_path": "process/0.16mm Optimal @MyKlipper.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Standard @MyBeltPrinter",
|
||||
"sub_path": "process/0.20mm Standard @MyBeltPrinter.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Standard @MyKlipper",
|
||||
"sub_path": "process/0.20mm Standard @MyKlipper.json"
|
||||
@@ -274,10 +262,6 @@
|
||||
"name": "MyKlipper 0.8 nozzle",
|
||||
"sub_path": "machine/MyKlipper 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_belt_common",
|
||||
"sub_path": "machine/fdm_belt_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_toolchanger_common",
|
||||
"sub_path": "machine/fdm_toolchanger_common.json"
|
||||
@@ -290,22 +274,6 @@
|
||||
"name": "MyRRF 0.4 nozzle",
|
||||
"sub_path": "machine/MyRRF 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "MyBeltPrinter 0.2 nozzle",
|
||||
"sub_path": "machine/MyBeltPrinter 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "MyBeltPrinter 0.4 nozzle",
|
||||
"sub_path": "machine/MyBeltPrinter 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "MyBeltPrinter 0.6 nozzle",
|
||||
"sub_path": "machine/MyBeltPrinter 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "MyBeltPrinter 0.8 nozzle",
|
||||
"sub_path": "machine/MyBeltPrinter 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "MyToolChanger 0.2 nozzle",
|
||||
"sub_path": "machine/MyToolChanger 0.2 nozzle.json"
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 30 KiB |
@@ -1,27 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "MyBeltPrinter 0.2 nozzle",
|
||||
"inherits": "fdm_belt_common",
|
||||
"from": "system",
|
||||
"setting_id": "3w1uyJdmm14QhDnH",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Generic Belt Printer",
|
||||
"default_print_profile": "0.12mm Fine @MyBeltPrinter",
|
||||
"nozzle_diameter": [
|
||||
"0.2"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.16"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"printer_variant": "0.2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"350x0",
|
||||
"350x350",
|
||||
"0x350"
|
||||
],
|
||||
"printable_height": "300"
|
||||
}
|
||||
@@ -1,20 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "MyBeltPrinter 0.4 nozzle",
|
||||
"inherits": "fdm_belt_common",
|
||||
"from": "system",
|
||||
"setting_id": "6nRHUtvJOUffocbu",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Generic Belt Printer",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_variant": "0.4",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"350x0",
|
||||
"350x350",
|
||||
"0x350"
|
||||
],
|
||||
"printable_height": "300"
|
||||
}
|
||||
@@ -1,26 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "MyBeltPrinter 0.6 nozzle",
|
||||
"inherits": "fdm_belt_common",
|
||||
"from": "system",
|
||||
"setting_id": "K0m9HbUNwKT4UCJV",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Generic Belt Printer",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.4"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"printer_variant": "0.6",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"350x0",
|
||||
"350x350",
|
||||
"0x350"
|
||||
],
|
||||
"printable_height": "300"
|
||||
}
|
||||
@@ -1,26 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "MyBeltPrinter 0.8 nozzle",
|
||||
"inherits": "fdm_belt_common",
|
||||
"from": "system",
|
||||
"setting_id": "rHAweDz4eNwttPNA",
|
||||
"instantiation": "true",
|
||||
"printer_model": "Generic Belt Printer",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.6"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
],
|
||||
"printer_variant": "0.8",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"350x0",
|
||||
"350x350",
|
||||
"0x350"
|
||||
],
|
||||
"printable_height": "300"
|
||||
}
|
||||
@@ -1,12 +0,0 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Generic Belt Printer",
|
||||
"model_id": "my_belt_01",
|
||||
"nozzle_diameter": "0.4;0.2;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "MyPrinter",
|
||||
"bed_model": "Custom_350_bed.stl",
|
||||
"bed_texture": "orcaslicer_bed_texture.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
|
||||
}
|
||||
@@ -1,96 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_belt_common",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "klipper",
|
||||
"single_extruder_multi_material": "0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @MyBeltPrinter",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"long_retractions_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"travel_slope": [
|
||||
"3"
|
||||
],
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"gcode_remap_x": "rev_x",
|
||||
"gcode_remap_y": "pos_z",
|
||||
"gcode_remap_z": "pos_y",
|
||||
"belt_printer": "1",
|
||||
"belt_slice_rotation": "x",
|
||||
"belt_slice_rotation_angle": "45",
|
||||
"belt_slice_rotation_global": "1",
|
||||
"build_plate_tilt_x": "45",
|
||||
"purge_in_prime_tower": "0",
|
||||
"scan_first_layer": "0",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,20 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @MyBeltPrinter",
|
||||
"inherits": "fdm_process_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "EugqqdLJ423bgEwN",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.12",
|
||||
"initial_layer_print_height": "0.12",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "6",
|
||||
"support_top_z_distance": "0.08",
|
||||
"support_bottom_z_distance": "0.08",
|
||||
"skirt_loops": "0",
|
||||
"skirt_distance": "0",
|
||||
"compatible_printers": [
|
||||
"MyBeltPrinter 0.2 nozzle",
|
||||
"MyBeltPrinter 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,17 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @MyBeltPrinter",
|
||||
"inherits": "fdm_process_klipper_common",
|
||||
"from": "system",
|
||||
"setting_id": "YzCDAgH3uLOM53pF",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"skirt_loops": "0",
|
||||
"skirt_distance": "0",
|
||||
"compatible_printers": [
|
||||
"MyBeltPrinter 0.4 nozzle",
|
||||
"MyBeltPrinter 0.6 nozzle",
|
||||
"MyBeltPrinter 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,54 +0,0 @@
|
||||
{
|
||||
"name": "IdeaFormer",
|
||||
"version": "02.00.00.06",
|
||||
"force_update": "0",
|
||||
"description": "IdeaFormer belt printer configurations",
|
||||
"machine_model_list": [
|
||||
{
|
||||
"name": "IdeaFormer IR3 V2",
|
||||
"sub_path": "machine/IdeaFormer IR3 V2.json"
|
||||
}
|
||||
],
|
||||
"process_list": [
|
||||
{
|
||||
"name": "fdm_process_common",
|
||||
"sub_path": "process/fdm_process_common.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Standard @IdeaFormer IR3 V2",
|
||||
"sub_path": "process/0.20mm Standard @IdeaFormer IR3 V2.json"
|
||||
}
|
||||
],
|
||||
"filament_list": [
|
||||
{
|
||||
"name": "Generic PLA @IdeaFormer IR3 V2",
|
||||
"sub_path": "filament/Generic PLA @IdeaFormer IR3 V2.json"
|
||||
},
|
||||
{
|
||||
"name": "eSUN PLA @IdeaFormer IR3 V2",
|
||||
"sub_path": "filament/eSUN PLA @IdeaFormer IR3 V2.json"
|
||||
},
|
||||
{
|
||||
"name": "Generic PETG @IdeaFormer IR3 V2",
|
||||
"sub_path": "filament/Generic PETG @IdeaFormer IR3 V2.json"
|
||||
}
|
||||
],
|
||||
"machine_list": [
|
||||
{
|
||||
"name": "fdm_machine_common",
|
||||
"sub_path": "machine/fdm_machine_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_klipper_common",
|
||||
"sub_path": "machine/fdm_klipper_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_belt_common",
|
||||
"sub_path": "machine/fdm_belt_common.json"
|
||||
},
|
||||
{
|
||||
"name": "IdeaFormer IR3 V2 0.4 nozzle",
|
||||
"sub_path": "machine/IdeaFormer IR3 V2 0.4 nozzle.json"
|
||||
}
|
||||
]
|
||||
}
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 183 KiB |
@@ -1,77 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PETG @IdeaFormer IR3 V2",
|
||||
"inherits": "Generic PETG @System",
|
||||
"from": "system",
|
||||
"setting_id": "n4zaXcUUzTqAxq5f",
|
||||
"instantiation": "true",
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"IdeaFormer IR3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Generic PETG @IdeaFormer IR3 V2"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Generic PETG @IdeaFormer IR3 V2 — belt PETG, bed 80C"
|
||||
]
|
||||
}
|
||||
@@ -1,65 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PLA @IdeaFormer IR3 V2",
|
||||
"inherits": "Generic PLA @System",
|
||||
"from": "system",
|
||||
"setting_id": "1xjycsEAFh6KQIhp",
|
||||
"instantiation": "true",
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"IdeaFormer IR3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Generic PLA @IdeaFormer IR3 V2"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Generic PLA @IdeaFormer IR3 V2 — belt PLA, bed 75C"
|
||||
]
|
||||
}
|
||||
@@ -1,36 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "eSUN PLA @IdeaFormer IR3 V2",
|
||||
"inherits": "Generic PLA @IdeaFormer IR3 V2",
|
||||
"from": "system",
|
||||
"setting_id": "XqkviBmFHEglXueX",
|
||||
"filament_id": "OFkrxQC4",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": [
|
||||
"IdeaFormer IR3 V2 0.4 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"eSUN"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"eSUN PLA @IdeaFormer IR3 V2"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"200"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.12"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20"
|
||||
]
|
||||
}
|
||||
@@ -1,98 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "IdeaFormer IR3 V2 0.4 nozzle",
|
||||
"inherits": "fdm_belt_common",
|
||||
"from": "system",
|
||||
"setting_id": "MDQZgwRgg72lmjtu",
|
||||
"instantiation": "true",
|
||||
"printer_model": "IdeaFormer IR3 V2",
|
||||
"printer_variant": "0.4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"250x0",
|
||||
"250x2000",
|
||||
"0x2000"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"belt_printer_infinite_y": "1",
|
||||
"thumbnails": [
|
||||
"48x48/PNG",
|
||||
"300x300/PNG"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @IdeaFormer IR3 V2"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @IdeaFormer IR3 V2",
|
||||
"use_relative_e_distances": "1",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000",
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"9000",
|
||||
"9000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"300"
|
||||
],
|
||||
"machine_start_gcode": "; === IdeaFormer IR3 V2 Belt Printer Start ===\n; Axes: X=lateral, Y=gantry height (probe), Z=belt\nG90 ; absolute positioning\nM82 ; absolute extruder\nG21 ; millimeters\nG28 ; home all axes\nG1 Y20 F500 ; lift nozzle 20mm from belt\n; Bed + hotend temps come from the active filament profile. Belt PLA requires 75 C bed — use Generic/eSun PLA @IdeaFormer IR3 V2 filament presets to get it automatically.\nM140 S[hot_plate_temp_initial_layer] ; set bed temp\nM104 S[nozzle_temperature_initial_layer] ; hotend temp\nM109 S[nozzle_temperature_initial_layer] ; wait hotend\nM190 S[hot_plate_temp_initial_layer] ; wait bed\n; --- Purge blob ---\nG92 E0 ; zero extruder\nG1 Y.1 ; nozzle 0.1mm above belt\nG1 E15 F1000 ; purge 15mm blob\nG1 Z20 E25 F800 ; belt advance 20mm + extrude\nG1 E23 ; retract 2mm\nG28 Y ; re-probe belt surface\nG1 E25 ; de-retract\n; --- Prime lines (full 250mm bed width) ---\nFMS_on ; filament motion sensor\nG1 X250 E50 F2000 ; prime line 1\nG92 Z0 ; reset belt origin\nG1 Z.4 ; belt advance 0.4mm\nG1 X0 E75 ; prime line 2\nG1 F1000 ; default feedrate\nG92 E0 Z0 ; zero extruder + belt = print origin\n",
|
||||
"machine_end_gcode": "; === IdeaFormer IR3 V2 Belt Printer End ===\nM400 ; wait for moves to finish\nM104 S0 ; heater off\nM140 S0 ; bed off\nG92 E0 ; zero extruder\nG1 E-5 F300 ; retract 5mm\nG4 P5000 ; wait for ooze\nG91 ; relative mode - keep every end move relative on a belt\nG1 Y20 F1000 ; raise gantry 20mm for clearance over the part\nG1 Z676 F3000 ; advance belt one full machine-depth to eject the part and clean the belt\nG90 ; back to absolute\nG28 X ; home X only - NEVER 'G28' all: that homes Z/belt and reverses the whole print back into the gantry\nFMS_off ; filament motion sensor off\nBED_MESH_CLEAR\nM84 ; disable motors\n",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"layer_change_gcode": "G92 E0 ; belt: reset extruder at layer change (relative E)"
|
||||
}
|
||||
@@ -1,12 +0,0 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "IdeaFormer IR3 V2",
|
||||
"model_id": "IdeaFormer_IR3_V2",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "IdeaFormer",
|
||||
"bed_model": "",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic PLA @IdeaFormer IR3 V2;Generic PETG @IdeaFormer IR3 V2"
|
||||
}
|
||||
@@ -1,99 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_belt_common",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "klipper",
|
||||
"single_extruder_multi_material": "0",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @IdeaFormer IR3 V2",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"long_retractions_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"travel_slope": [
|
||||
"3"
|
||||
],
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
],
|
||||
"gcode_remap_x": "rev_x",
|
||||
"gcode_remap_y": "pos_z",
|
||||
"gcode_remap_z": "pos_y",
|
||||
"printer_extruder_id": [
|
||||
"1"
|
||||
],
|
||||
"belt_printer": "1",
|
||||
"belt_slice_rotation": "x",
|
||||
"belt_slice_rotation_angle": "45",
|
||||
"belt_slice_rotation_global": "1",
|
||||
"build_plate_tilt_x": "45",
|
||||
"purge_in_prime_tower": "0",
|
||||
"scan_first_layer": "0",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,140 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_klipper_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "klipper",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"25",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.4"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"z_hop_types": "Normal Lift",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @MyKlipper",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_start_gcode": "M190 S[bed_temperature_initial_layer_single]\nM109 S[nozzle_temperature_initial_layer]\nPRINT_START EXTRUDER=[nozzle_temperature_initial_layer] BED=[bed_temperature_initial_layer_single]\n",
|
||||
"machine_end_gcode": "PRINT_END",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_pause_gcode": "PAUSE",
|
||||
"scan_first_layer": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "0"
|
||||
}
|
||||
@@ -1,118 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"printer_technology": "FFF",
|
||||
"deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"gcode_flavor": "marlin",
|
||||
"machine_max_acceleration_e": [
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"1000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"10000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"8"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"60"
|
||||
],
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"default_print_profile": "",
|
||||
"machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
|
||||
"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"machine_pause_gcode": "M601"
|
||||
}
|
||||
@@ -1,23 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @IdeaFormer IR3 V2",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "91atcIwv5728phqX",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_line_width": "0.42",
|
||||
"wall_loops": "2",
|
||||
"reduce_infill_retraction": "1",
|
||||
"detect_overhang_wall": "1",
|
||||
"skirt_loops": "0",
|
||||
"skirt_distance": "0",
|
||||
"sparse_infill_pattern": "grid",
|
||||
"sparse_infill_speed": "200",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_interface_pattern": "rectilinear",
|
||||
"compatible_printers": [
|
||||
"IdeaFormer IR3 V2 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,106 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_speed": "50",
|
||||
"brim_width": "5",
|
||||
"brim_object_gap": "0.1",
|
||||
"compatible_printers": [],
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "1000",
|
||||
"initial_layer_acceleration": "500",
|
||||
"top_surface_acceleration": "1000",
|
||||
"travel_acceleration": "1000",
|
||||
"inner_wall_acceleration": "1000",
|
||||
"outer_wall_acceleration": "700",
|
||||
"bridge_no_support": "0",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"infill_combination": "0",
|
||||
"infill_wall_overlap": "25%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "10%",
|
||||
"ironing_spacing": "0.15",
|
||||
"ironing_speed": "30",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "10",
|
||||
"line_width": "110%",
|
||||
"inner_wall_line_width": "110%",
|
||||
"outer_wall_line_width": "100%",
|
||||
"top_surface_line_width": "93.75%",
|
||||
"sparse_infill_line_width": "110%",
|
||||
"initial_layer_line_width": "120%",
|
||||
"internal_solid_infill_line_width": "120%",
|
||||
"support_line_width": "96%",
|
||||
"wall_loops": "3",
|
||||
"print_settings_id": "",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "3",
|
||||
"min_skirt_length": "4",
|
||||
"skirt_loops": "0",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "0",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.2",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_filament": "0",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_interface_bottom_layers": "2",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "80",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "2.5",
|
||||
"support_speed": "150",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"tree_support_branch_angle": "30",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "0",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_shell_thickness": "0.8",
|
||||
"enable_prime_tower": "1",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"layer_height": "0.2",
|
||||
"bottom_shell_layers": "3",
|
||||
"top_shell_layers": "4",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "45",
|
||||
"initial_layer_infill_speed": "45",
|
||||
"outer_wall_speed": "45",
|
||||
"inner_wall_speed": "80",
|
||||
"sparse_infill_speed": "150",
|
||||
"internal_solid_infill_speed": "150",
|
||||
"top_surface_speed": "50",
|
||||
"gap_infill_speed": "30",
|
||||
"travel_speed": "200"
|
||||
}
|
||||
@@ -1,194 +0,0 @@
|
||||
{
|
||||
"name": "Pragostroj",
|
||||
"version": "01.00.01.00",
|
||||
"force_update": "0",
|
||||
"description": "Pragostroj printers config",
|
||||
"machine_model_list": [
|
||||
{
|
||||
"name": "KINARB 1HB",
|
||||
"sub_path": "machine/KINARB1HB.json"
|
||||
},
|
||||
{
|
||||
"name": "KINARB 2HB",
|
||||
"sub_path": "machine/KINARB2HB.json"
|
||||
}
|
||||
],
|
||||
"machine_list": [
|
||||
{
|
||||
"name": "fdm_machine_common",
|
||||
"sub_path": "machine/fdm_machine_common.json"
|
||||
},
|
||||
{
|
||||
"name": "kinarb_machine_common",
|
||||
"sub_path": "machine/kinarb_machine_common.json"
|
||||
},
|
||||
{
|
||||
"name": "KINARB 1HB 0.4 nozzle",
|
||||
"sub_path": "machine/KINARB 1HB 04 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "KINARB 1HB 0.5 nozzle",
|
||||
"sub_path": "machine/KINARB 1HB 05 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "KINARB 1HB 0.6 nozzle",
|
||||
"sub_path": "machine/KINARB 1HB 06 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "KINARB 1HB 0.8 nozzle",
|
||||
"sub_path": "machine/KINARB 1HB 08 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "KINARB 1HB 1.0 nozzle",
|
||||
"sub_path": "machine/KINARB 1HB 10 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "KINARB 1HB 1.2 nozzle",
|
||||
"sub_path": "machine/KINARB 1HB 12 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "KINARB 1HB 1.6 nozzle",
|
||||
"sub_path": "machine/KINARB 1HB 16 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "kinarb_2hb_machine_common",
|
||||
"sub_path": "machine/kinarb_2hb_machine_common.json"
|
||||
},
|
||||
{
|
||||
"name": "KINARB 2HB 0.4 nozzle",
|
||||
"sub_path": "machine/KINARB 2HB 04 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "KINARB 2HB 0.5 nozzle",
|
||||
"sub_path": "machine/KINARB 2HB 05 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "KINARB 2HB 0.6 nozzle",
|
||||
"sub_path": "machine/KINARB 2HB 06 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "KINARB 2HB 0.8 nozzle",
|
||||
"sub_path": "machine/KINARB 2HB 08 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "KINARB 2HB 1.0 nozzle",
|
||||
"sub_path": "machine/KINARB 2HB 10 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "KINARB 2HB 1.2 nozzle",
|
||||
"sub_path": "machine/KINARB 2HB 12 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "KINARB 2HB 1.6 nozzle",
|
||||
"sub_path": "machine/KINARB 2HB 16 nozzle.json"
|
||||
}
|
||||
],
|
||||
"process_list": [
|
||||
{
|
||||
"name": "fdm_process_common",
|
||||
"sub_path": "process/fdm_process_common.json"
|
||||
},
|
||||
{
|
||||
"name": "process_common_kinarb",
|
||||
"sub_path": "process/process_common_kinarb.json"
|
||||
},
|
||||
{
|
||||
"name": "0.15mm PETG fine @Pragostroj 0.5",
|
||||
"sub_path": "process/0.15mm PETG fine @Pragostroj 0.5.json"
|
||||
},
|
||||
{
|
||||
"name": "0.25mm Draft @Pragostroj 0.5",
|
||||
"sub_path": "process/0.25mm Draft @Pragostroj 0.5.json"
|
||||
},
|
||||
{
|
||||
"name": "0.25mm PP Draft @Pragostroj 0.5",
|
||||
"sub_path": "process/0.25mm PP Draft @Pragostroj 0.5.json"
|
||||
},
|
||||
{
|
||||
"name": "0.25mm quality @Pragostroj 0.5",
|
||||
"sub_path": "process/0.25mm quality @Pragostroj 0.5.json"
|
||||
},
|
||||
{
|
||||
"name": "0.2mm Draft @Pragostroj 0.4",
|
||||
"sub_path": "process/0.2mm Draft @Pragostroj 0.4.json"
|
||||
},
|
||||
{
|
||||
"name": "0.3mm Draft @Pragostroj 0.6",
|
||||
"sub_path": "process/0.3mm Draft @Pragostroj 0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "0.40mm quality @Pragostroj 0.8",
|
||||
"sub_path": "process/0.40mm quality @Pragostroj 0.8.json"
|
||||
},
|
||||
{
|
||||
"name": "0.4mm Draft @Pragostroj 0.8",
|
||||
"sub_path": "process/0.4mm Draft @Pragostroj 0.8.json"
|
||||
},
|
||||
{
|
||||
"name": "0.4mm PP Draft @Pragostroj 0.8",
|
||||
"sub_path": "process/0.4mm PP Draft @Pragostroj 0.8.json"
|
||||
},
|
||||
{
|
||||
"name": "0.5mm Draft @Pragostroj 1.0",
|
||||
"sub_path": "process/0.5mm Draft @Pragostroj 1.0.json"
|
||||
},
|
||||
{
|
||||
"name": "0.6mm Draft @Pragostroj 1.2",
|
||||
"sub_path": "process/0.6mm Draft @Pragostroj 1.2.json"
|
||||
},
|
||||
{
|
||||
"name": "0.8mm Draft @Pragostroj 1.6",
|
||||
"sub_path": "process/0.8mm Draft @Pragostroj 1.6.json"
|
||||
},
|
||||
{
|
||||
"name": "0.25mm quality @Pragostroj 0.5 - 100mms",
|
||||
"sub_path": "process/0.25mm quality @Pragostroj 0.5 - 100mms.json"
|
||||
}
|
||||
],
|
||||
"filament_list": [
|
||||
{
|
||||
"name": "fdm_filament_common",
|
||||
"sub_path": "filament/fdm_filament_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_hips",
|
||||
"sub_path": "filament/fdm_filament_hips.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_petg",
|
||||
"sub_path": "filament/fdm_filament_petg.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pla",
|
||||
"sub_path": "filament/fdm_filament_pla.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pp",
|
||||
"sub_path": "filament/fdm_filament_pp.json"
|
||||
},
|
||||
{
|
||||
"name": "Pragostroj hips @Pragostroj",
|
||||
"sub_path": "filament/Pragostroj hips @Pragostroj.json"
|
||||
},
|
||||
{
|
||||
"name": "Pragostroj PETG @Pragostroj 0.5 nozzle",
|
||||
"sub_path": "filament/Pragostroj PETG @Pragostroj 0.5 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle",
|
||||
"sub_path": "filament/Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Pragostroj PLAP @Pragostroj",
|
||||
"sub_path": "filament/Pragostroj PLAP @Pragostroj.json"
|
||||
},
|
||||
{
|
||||
"name": "Pragostroj PP @Pragostroj 0.5 nozzle",
|
||||
"sub_path": "filament/Pragostroj PP @Pragostroj 0.5 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Pragostroj PP @Pragostroj 0.8 nozzle",
|
||||
"sub_path": "filament/Pragostroj PP @Pragostroj 0.8 nozzle.json"
|
||||
}
|
||||
]
|
||||
}
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 136 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 136 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 136 KiB |
-31
@@ -1,31 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "WMVkoSEAS0OVhEgL",
|
||||
"filament_id": "OFyKW1DX",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Fillamentum"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"KINARB 1HB 0.4 nozzle",
|
||||
"KINARB 2HB 0.4 nozzle",
|
||||
"KINARB 1HB 0.5 nozzle",
|
||||
"KINARB 2HB 0.5 nozzle",
|
||||
"KINARB 1HB 0.6 nozzle",
|
||||
"KINARB 2HB 0.6 nozzle",
|
||||
"KINARB 1HB 0.8 nozzle",
|
||||
"KINARB 2HB 0.8 nozzle",
|
||||
"KINARB 1HB 1.0 nozzle",
|
||||
"KINARB 2HB 1.0 nozzle",
|
||||
"KINARB 1HB 1.2 nozzle",
|
||||
"KINARB 2HB 1.2 nozzle",
|
||||
"KINARB 1HB 1.6 nozzle",
|
||||
"KINARB 2HB 1.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,37 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Pragostroj PETG @Pragostroj 0.5 nozzle",
|
||||
"inherits": "fdm_filament_petg",
|
||||
"from": "system",
|
||||
"setting_id": "LXUXFNc2wMJfsv1D",
|
||||
"filament_id": "OFXNhQHm",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Pragostroj"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Pragostroj PETG @Pragostroj 0.5 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.12"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"KINARB 1HB 0.5 nozzle",
|
||||
"KINARB 2HB 0.5 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,52 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Pragostroj PLAP @Pragostroj",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"setting_id": "zN1e8RYMoHXldKsZ",
|
||||
"filament_id": "OFjKU9JG",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Pragostroj"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"PLAP"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.93"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"215"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.17"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"KINARB 1HB 0.4 nozzle",
|
||||
"KINARB 2HB 0.4 nozzle",
|
||||
"KINARB 1HB 0.5 nozzle",
|
||||
"KINARB 2HB 0.5 nozzle",
|
||||
"KINARB 1HB 0.6 nozzle",
|
||||
"KINARB 2HB 0.6 nozzle",
|
||||
"KINARB 1HB 0.8 nozzle",
|
||||
"KINARB 2HB 0.8 nozzle",
|
||||
"KINARB 1HB 1.0 nozzle",
|
||||
"KINARB 2HB 1.0 nozzle",
|
||||
"KINARB 1HB 1.2 nozzle",
|
||||
"KINARB 2HB 1.2 nozzle",
|
||||
"KINARB 1HB 1.6 nozzle",
|
||||
"KINARB 2HB 1.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,46 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Pragostroj PP @Pragostroj 0.5 nozzle",
|
||||
"inherits": "fdm_filament_pp",
|
||||
"from": "system",
|
||||
"setting_id": "kamBMjjHXAQsYUsQ",
|
||||
"filament_id": "OFp4bAZ8",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Pragostroj"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Pragostroj PP @Pragostroj 0.5 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"101%"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"KINARB 1HB 0.5 nozzle",
|
||||
"KINARB 2HB 0.5 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,46 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Pragostroj PP @Pragostroj 0.8 nozzle",
|
||||
"inherits": "fdm_filament_pp",
|
||||
"from": "system",
|
||||
"setting_id": "md2tDgtQe6V3fuWU",
|
||||
"filament_id": "OFp4bAZ8",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Pragostroj"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Pragostroj PP @Pragostroj 0.8 nozzle"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"101%"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.05"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"KINARB 1HB 0.8 nozzle",
|
||||
"KINARB 2HB 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,31 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Pragostroj hips @Pragostroj",
|
||||
"inherits": "fdm_filament_hips",
|
||||
"from": "system",
|
||||
"setting_id": "K2nm1PBtMp2msIN9",
|
||||
"filament_id": "OF0g2qrF",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Pragostroj"
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"KINARB 1HB 0.4 nozzle",
|
||||
"KINARB 2HB 0.4 nozzle",
|
||||
"KINARB 1HB 0.5 nozzle",
|
||||
"KINARB 2HB 0.5 nozzle",
|
||||
"KINARB 1HB 0.6 nozzle",
|
||||
"KINARB 2HB 0.6 nozzle",
|
||||
"KINARB 1HB 0.8 nozzle",
|
||||
"KINARB 2HB 0.8 nozzle",
|
||||
"KINARB 1HB 1.0 nozzle",
|
||||
"KINARB 2HB 1.0 nozzle",
|
||||
"KINARB 1HB 1.2 nozzle",
|
||||
"KINARB 2HB 1.2 nozzle",
|
||||
"KINARB 1HB 1.6 nozzle",
|
||||
"KINARB 2HB 1.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,135 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"75"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
""
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"bed_type": [
|
||||
"Cool Plate"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"45"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"5"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
]
|
||||
}
|
||||
@@ -1,88 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_hips",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"HIPS"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.92"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"1"
|
||||
],
|
||||
"filament_cost": [
|
||||
"1000"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"90"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"80"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"95%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
]
|
||||
}
|
||||
@@ -1,55 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_petg",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"22"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
@@ -1,25 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pla",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
]
|
||||
}
|
||||
@@ -1,61 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "fdm_filament_pp",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"filament_type": [
|
||||
"PP"
|
||||
],
|
||||
"filament_density": [
|
||||
"0.9"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1.0"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"101%"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"idle_temperature": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
@@ -1,17 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "KINARB 1HB 0.4 nozzle",
|
||||
"inherits": "kinarb_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "pm3ddboqV14wpT5B",
|
||||
"instantiation": "true",
|
||||
"printer_model": "KINARB 1HB",
|
||||
"printer_variant": "0.4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"default_print_profile": "0.2mm Draft @Pragostroj 0.4",
|
||||
"default_filament_profile": [
|
||||
"Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,17 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "KINARB 1HB 0.5 nozzle",
|
||||
"inherits": "kinarb_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "GQD5YwY5gOkUByac",
|
||||
"instantiation": "true",
|
||||
"printer_model": "KINARB 1HB",
|
||||
"printer_variant": "0.5",
|
||||
"nozzle_diameter": [
|
||||
"0.5"
|
||||
],
|
||||
"default_print_profile": "0.25mm Draft @Pragostroj 0.5",
|
||||
"default_filament_profile": [
|
||||
"Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,23 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "KINARB 1HB 0.6 nozzle",
|
||||
"inherits": "kinarb_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "7rc9qsIH4SpBjTfC",
|
||||
"instantiation": "true",
|
||||
"printer_model": "KINARB 1HB",
|
||||
"printer_variant": "0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"default_print_profile": "0.3mm Draft @Pragostroj 0.6",
|
||||
"default_filament_profile": [
|
||||
"Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.15"
|
||||
]
|
||||
}
|
||||
@@ -1,23 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "KINARB 1HB 0.8 nozzle",
|
||||
"inherits": "kinarb_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "ZQhln1W2k0RcGsAW",
|
||||
"instantiation": "true",
|
||||
"printer_model": "KINARB 1HB",
|
||||
"printer_variant": "0.8",
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"default_print_profile": "0.4mm Draft @Pragostroj 0.8",
|
||||
"default_filament_profile": [
|
||||
"Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.64"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
]
|
||||
}
|
||||
@@ -1,23 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "KINARB 1HB 1.0 nozzle",
|
||||
"inherits": "kinarb_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "YzDkELvWtxCX8YCV",
|
||||
"instantiation": "true",
|
||||
"printer_model": "KINARB 1HB",
|
||||
"printer_variant": "1.0",
|
||||
"nozzle_diameter": [
|
||||
"1.0"
|
||||
],
|
||||
"default_print_profile": "0.5mm Draft @Pragostroj 1.0",
|
||||
"default_filament_profile": [
|
||||
"Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.8"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.25"
|
||||
]
|
||||
}
|
||||
@@ -1,23 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "KINARB 1HB 1.2 nozzle",
|
||||
"inherits": "kinarb_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "FbeIpEH1KB3OxbWZ",
|
||||
"instantiation": "true",
|
||||
"printer_model": "KINARB 1HB",
|
||||
"printer_variant": "1.2",
|
||||
"nozzle_diameter": [
|
||||
"1.2"
|
||||
],
|
||||
"default_print_profile": "0.6mm Draft @Pragostroj 1.2",
|
||||
"default_filament_profile": [
|
||||
"Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.96"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.3"
|
||||
]
|
||||
}
|
||||
@@ -1,23 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "KINARB 1HB 1.6 nozzle",
|
||||
"inherits": "kinarb_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "HYs1e2qsnzkPaO9J",
|
||||
"instantiation": "true",
|
||||
"printer_model": "KINARB 1HB",
|
||||
"printer_variant": "1.6",
|
||||
"nozzle_diameter": [
|
||||
"1.6"
|
||||
],
|
||||
"default_print_profile": "0.8mm Draft @Pragostroj 1.6",
|
||||
"default_filament_profile": [
|
||||
"Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"1.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.4"
|
||||
]
|
||||
}
|
||||
@@ -1,27 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "KINARB 2HB 0.4 nozzle",
|
||||
"inherits": "kinarb_2hb_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "5OdhMXwsOJy1UqUV",
|
||||
"instantiation": "true",
|
||||
"printer_model": "KINARB 2HB",
|
||||
"extruders_count": "2",
|
||||
"nozzle_count": "2",
|
||||
"printer_variant": "0.4",
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"default_print_profile": "0.2mm Draft @Pragostroj 0.4",
|
||||
"default_filament_profile": [
|
||||
"Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle",
|
||||
"Pragostroj hips @Pragostroj"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.1"
|
||||
]
|
||||
}
|
||||
@@ -1,27 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "KINARB 2HB 0.5 nozzle",
|
||||
"inherits": "kinarb_2hb_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "0MYLkJK6xYBT8Ihi",
|
||||
"instantiation": "true",
|
||||
"printer_model": "KINARB 2HB",
|
||||
"extruders_count": "2",
|
||||
"nozzle_count": "2",
|
||||
"printer_variant": "0.5",
|
||||
"nozzle_diameter": [
|
||||
"0.5",
|
||||
"0.5"
|
||||
],
|
||||
"default_print_profile": "0.25mm Draft @Pragostroj 0.5",
|
||||
"default_filament_profile": [
|
||||
"Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle",
|
||||
"Pragostroj hips @Pragostroj"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.1"
|
||||
]
|
||||
}
|
||||
@@ -1,27 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "KINARB 2HB 0.6 nozzle",
|
||||
"inherits": "kinarb_2hb_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "9QTAyTkDTKHxENP4",
|
||||
"instantiation": "true",
|
||||
"printer_model": "KINARB 2HB",
|
||||
"extruders_count": "2",
|
||||
"nozzle_count": "2",
|
||||
"printer_variant": "0.6",
|
||||
"nozzle_diameter": [
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"default_print_profile": "0.3mm Draft @Pragostroj 0.6",
|
||||
"default_filament_profile": [
|
||||
"Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle",
|
||||
"Pragostroj hips @Pragostroj"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.48"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.15"
|
||||
]
|
||||
}
|
||||
@@ -1,27 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "KINARB 2HB 0.8 nozzle",
|
||||
"inherits": "kinarb_2hb_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "9GZJdG5Iw1pt59ul",
|
||||
"instantiation": "true",
|
||||
"printer_model": "KINARB 2HB",
|
||||
"extruders_count": "2",
|
||||
"nozzle_count": "2",
|
||||
"printer_variant": "0.8",
|
||||
"nozzle_diameter": [
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"default_print_profile": "0.4mm Draft @Pragostroj 0.8",
|
||||
"default_filament_profile": [
|
||||
"Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle",
|
||||
"Pragostroj hips @Pragostroj"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.64"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
]
|
||||
}
|
||||
@@ -1,27 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "KINARB 2HB 1.0 nozzle",
|
||||
"inherits": "kinarb_2hb_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "7KmSDXl3zWWxCJss",
|
||||
"instantiation": "true",
|
||||
"printer_model": "KINARB 2HB",
|
||||
"extruders_count": "2",
|
||||
"nozzle_count": "2",
|
||||
"printer_variant": "1.0",
|
||||
"nozzle_diameter": [
|
||||
"1.0",
|
||||
"1.0"
|
||||
],
|
||||
"default_print_profile": "0.5mm Draft @Pragostroj 1.0",
|
||||
"default_filament_profile": [
|
||||
"Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle",
|
||||
"Pragostroj hips @Pragostroj"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.8"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.25"
|
||||
]
|
||||
}
|
||||
@@ -1,27 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "KINARB 2HB 1.2 nozzle",
|
||||
"inherits": "kinarb_2hb_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "vNQtksa68lUXWwha",
|
||||
"instantiation": "true",
|
||||
"printer_model": "KINARB 2HB",
|
||||
"extruders_count": "2",
|
||||
"nozzle_count": "2",
|
||||
"printer_variant": "1.2",
|
||||
"nozzle_diameter": [
|
||||
"1.2",
|
||||
"1.2"
|
||||
],
|
||||
"default_print_profile": "0.6mm Draft @Pragostroj 1.2",
|
||||
"default_filament_profile": [
|
||||
"Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle",
|
||||
"Pragostroj hips @Pragostroj"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.96"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.3"
|
||||
]
|
||||
}
|
||||
@@ -1,27 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "KINARB 2HB 1.6 nozzle",
|
||||
"inherits": "kinarb_2hb_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "KrwyvkeskgY4yjB5",
|
||||
"instantiation": "true",
|
||||
"printer_model": "KINARB 2HB",
|
||||
"extruders_count": "2",
|
||||
"nozzle_count": "2",
|
||||
"printer_variant": "1.6",
|
||||
"nozzle_diameter": [
|
||||
"1.6",
|
||||
"1.6"
|
||||
],
|
||||
"default_print_profile": "0.8mm Draft @Pragostroj 1.6",
|
||||
"default_filament_profile": [
|
||||
"Fillamentum PLA Concret Grey @Pragostroj 330 AWD 0.4 nozzle",
|
||||
"Pragostroj hips @Pragostroj"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"1.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.4"
|
||||
]
|
||||
}
|
||||
@@ -1,11 +0,0 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "KINARB 1HB",
|
||||
"nozzle_diameter": "0.4;0.5;0.6;0.8;1.0;1.2;1.6",
|
||||
"nozzle_count": "1",
|
||||
"model_id": "V1",
|
||||
"family": "Kinarb",
|
||||
"machine_tech": "FDM",
|
||||
"default_materials": "Pragostroj PLAP @Pragostroj; Pragostroj hips @Pragostroj; Pragostroj PETG @Pragostroj 0.5 nozzle",
|
||||
"cover": "KINARB 1HB_cover.png"
|
||||
}
|
||||
@@ -1,11 +0,0 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "KINARB 2HB",
|
||||
"nozzle_diameter": "0.4;0.5;0.6;0.8;1.0;1.2;1.6",
|
||||
"nozzle_count": "2",
|
||||
"model_id": "V1",
|
||||
"family": "Kinarb",
|
||||
"machine_tech": "FDM",
|
||||
"default_materials": "Pragostroj PLAP @Pragostroj; Pragostroj hips @Pragostroj; Pragostroj PETG @Pragostroj 0.5 nozzle",
|
||||
"cover": "KINARB 2HB_cover.png"
|
||||
}
|
||||
@@ -1,139 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "reprapfirmware",
|
||||
"machine_start_gcode": "M109 S[nozzle_temperature_initial_layer]\nG1 Z10 F6000 ;Move the platform down 10mm\nG1 X60 Y10 F10000\nG1 Z0.25 F6000 ;Move the platform down 0,25mm\nG92 E0\nG1 X200 E20 F1000\nG1 X450 E40 F1000\nG92 E0",
|
||||
"machine_end_gcode": "{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+1, max_print_height)} F720 ; Move print head up{endif}\nG1 X0 Y200 F3600 ; park\n{if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+49, max_print_height)} F720 ; Move print head further up{endif}\nM221 S100 ; reset flow\nM900 K0 ; reset LA\nM104 S0 ; turn off temperature\nM140 S0 ; turn off heatbed\nM107 ; turn off fan\nM84 ; disable motors",
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"500",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"2500",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"2000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"2000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"500",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"200",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.2",
|
||||
"0.4"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.1"
|
||||
],
|
||||
"printable_height": "500",
|
||||
"extruder_clearance_radius": "65",
|
||||
"extruder_clearance_height_to_rod": "36",
|
||||
"extruder_clearance_height_to_lid": "140",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printer_settings_id": "",
|
||||
"printer_technology": "FFF",
|
||||
"printer_variant": "0.4",
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"0"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.6"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.2"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"single_extruder_multi_material": [
|
||||
"1"
|
||||
],
|
||||
"change_filament_gcode": "",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"machine_pause_gcode": "M601",
|
||||
"wipe": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
@@ -1,120 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "kinarb_2hb_machine_common",
|
||||
"inherits": "kinarb_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"extruder_offset": [
|
||||
"0x0",
|
||||
"0x0"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F",
|
||||
"#3465A4"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.6",
|
||||
"1.6"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"deretraction_speed": [
|
||||
"45",
|
||||
"45"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retract_before_wipe": [
|
||||
"70%",
|
||||
"70%"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"wipe": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Spiral Lift",
|
||||
"Spiral Lift"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces",
|
||||
"All Surfaces"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18",
|
||||
"18"
|
||||
],
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"travel_slope": [
|
||||
"3",
|
||||
"3"
|
||||
],
|
||||
"single_extruder_multi_material": [
|
||||
"0"
|
||||
],
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"540x0",
|
||||
"540x450",
|
||||
"0x450"
|
||||
],
|
||||
"extruder_printable_area": [
|
||||
"0x0,540x0,540x450,0x450",
|
||||
"0x0,540x0,540x450,0x450"
|
||||
],
|
||||
"extruder_printable_height": [
|
||||
"500",
|
||||
"500"
|
||||
],
|
||||
"nozzle_count": "2",
|
||||
"machine_tool_change_time": "5",
|
||||
"machine_start_gcode": "; --- DUAL-HEAD START G-CODE (placeholder, please verify with your RRF config) ---\nM104 S[nozzle_temperature_initial_layer_0] T0 ; preheat T0 (no tool select)\nM104 S[nozzle_temperature_initial_layer_1] T1 ; preheat T1 (no tool select)\nM116 ; wait for all temps\nG1 Z10 F6000 ;Move the platform down 10mm\nG1 X60 Y10 F10000\nG1 Z0.25 F6000 ;Move the platform down 0,25mm\nG92 E0\nG1 X200 E20 F1000\nG1 X450 E40 F1000\nG92 E0",
|
||||
"change_filament_gcode": "; --- TOOL CHANGE (placeholder) ---\nT[next_extruder]\nG92 E0",
|
||||
"extruders_count": "2",
|
||||
"parking_pos_retraction": "0",
|
||||
"cooling_tube_length": "0",
|
||||
"cooling_tube_retraction": "0",
|
||||
"extra_loading_move": "0",
|
||||
"enable_filament_ramming": "0",
|
||||
"high_current_on_filament_swap": "0",
|
||||
"purge_in_prime_tower": "0"
|
||||
}
|
||||
@@ -1,108 +0,0 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "kinarb_machine_common",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"thumbnails": "48x48/PNG, 300x300/PNG",
|
||||
"thumbnails_format": "PNG",
|
||||
"adaptive_bed_mesh_margin": "0",
|
||||
"auxiliary_fan": "0",
|
||||
"bbl_use_printhost": "0",
|
||||
"bed_custom_model": "",
|
||||
"bed_custom_texture": "",
|
||||
"bed_mesh_max": "99999,99999",
|
||||
"bed_mesh_min": "-99999,-99999",
|
||||
"bed_mesh_probe_distance": "50,50",
|
||||
"best_object_pos": "0.5,0.5",
|
||||
"change_extrusion_role_gcode": "",
|
||||
"cooling_tube_length": "5",
|
||||
"cooling_tube_retraction": "91.5",
|
||||
"default_bed_type": "",
|
||||
"bed_exclude_area": [],
|
||||
"disable_m73": "0",
|
||||
"emit_machine_limits_to_gcode": "1",
|
||||
"enable_filament_ramming": "1",
|
||||
"enable_long_retraction_when_cut": "0",
|
||||
"extra_loading_move": "-2",
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"head_wrap_detect_zone": [],
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "duet",
|
||||
"long_retractions_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_max_jerk_x": [
|
||||
"10",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"10",
|
||||
"9"
|
||||
],
|
||||
"machine_max_junction_deviation": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_tool_change_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"manual_filament_change": "0",
|
||||
"max_resonance_avoidance_speed": "120",
|
||||
"min_resonance_avoidance_speed": "70",
|
||||
"nozzle_height": "2.5",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "undefine",
|
||||
"nozzle_volume": "0",
|
||||
"parking_pos_retraction": "92",
|
||||
"pellet_modded_printer": "0",
|
||||
"preferred_orientation": "0",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"600x0",
|
||||
"600x460",
|
||||
"0x460"
|
||||
],
|
||||
"printer_notes": "",
|
||||
"printer_structure": "undefine",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printing_by_object_gcode": "",
|
||||
"purge_in_prime_tower": "1",
|
||||
"resonance_avoidance": "0",
|
||||
"retract_lift_above": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"support_air_filtration": "1",
|
||||
"support_chamber_temp_control": "1",
|
||||
"support_multi_bed_types": "0",
|
||||
"template_custom_gcode": "",
|
||||
"time_cost": "0",
|
||||
"time_lapse_gcode": "",
|
||||
"travel_slope": [
|
||||
"3"
|
||||
],
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Spiral Lift"
|
||||
],
|
||||
"z_offset": "0"
|
||||
}
|
||||
@@ -1,73 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.15mm PETG fine @Pragostroj 0.5",
|
||||
"inherits": "process_common_kinarb",
|
||||
"from": "system",
|
||||
"setting_id": "ajaxOz8Z7HrO03lA",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.15",
|
||||
"initial_layer_print_height": "0.15",
|
||||
"line_width": "0.5",
|
||||
"outer_wall_line_width": "0.5",
|
||||
"inner_wall_line_width": "0.5",
|
||||
"internal_solid_infill_line_width": "0.5",
|
||||
"top_surface_line_width": "0.5",
|
||||
"sparse_infill_line_width": "0.55",
|
||||
"support_line_width": "0.5",
|
||||
"initial_layer_line_width": "0.9",
|
||||
"brim_type": "outer_only",
|
||||
"skirt_loops": "2",
|
||||
"wall_loops": "4",
|
||||
"wall_sequence": "outer wall/inner wall",
|
||||
"sparse_infill_pattern": "cubic",
|
||||
"gap_fill_target": "everywhere",
|
||||
"enable_arc_fitting": "1",
|
||||
"ooze_prevention": "1",
|
||||
"small_perimeter_speed": "30%",
|
||||
"small_perimeter_threshold": "5",
|
||||
"slow_down_layers": "3",
|
||||
"default_acceleration": "2000",
|
||||
"outer_wall_acceleration": "1000",
|
||||
"inner_wall_acceleration": "2000",
|
||||
"top_surface_acceleration": "1000",
|
||||
"travel_acceleration": "1000",
|
||||
"default_jerk": "5",
|
||||
"initial_layer_jerk": "5",
|
||||
"infill_jerk": "5",
|
||||
"inner_wall_jerk": "5",
|
||||
"outer_wall_jerk": "5",
|
||||
"top_surface_jerk": "5",
|
||||
"travel_jerk": "5",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"outer_wall_speed": "50",
|
||||
"inner_wall_speed": "150",
|
||||
"internal_solid_infill_speed": "120",
|
||||
"sparse_infill_speed": "150",
|
||||
"top_surface_speed": "80",
|
||||
"gap_infill_speed": "50",
|
||||
"travel_speed": "300",
|
||||
"enable_support": "1",
|
||||
"support_type": "tree(auto)",
|
||||
"support_threshold_angle": "45",
|
||||
"support_speed": "120",
|
||||
"support_interface_speed": "30",
|
||||
"support_top_z_distance": "0.25",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_object_xy_distance": "0.6",
|
||||
"support_filament": "1",
|
||||
"support_interface_filament": "1",
|
||||
"support_interface_pattern": "concentric",
|
||||
"support_interface_spacing": "0",
|
||||
"support_bottom_interface_spacing": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "3",
|
||||
"independent_support_layer_height": "0",
|
||||
"raft_layers": "4",
|
||||
"raft_contact_distance": "0.15",
|
||||
"raft_first_layer_density": "100%",
|
||||
"compatible_printers": [
|
||||
"KINARB 1HB 0.5 nozzle",
|
||||
"KINARB 2HB 0.5 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,36 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.25mm Draft @Pragostroj 0.5",
|
||||
"inherits": "process_common_kinarb",
|
||||
"from": "system",
|
||||
"setting_id": "rYXaH0o5vjuffPPn",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"line_width": "0.5",
|
||||
"outer_wall_line_width": "0.5",
|
||||
"inner_wall_line_width": "0.5",
|
||||
"internal_solid_infill_line_width": "0.5",
|
||||
"top_surface_line_width": "0.5",
|
||||
"sparse_infill_line_width": "0.6",
|
||||
"support_line_width": "0.5",
|
||||
"bottom_shell_thickness": "0.5",
|
||||
"top_shell_thickness": "1.5",
|
||||
"bridge_acceleration": "1000",
|
||||
"bridge_speed": "22",
|
||||
"infill_anchor": "2.5",
|
||||
"infill_anchor_max": "20",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"raft_contact_distance": "0.2",
|
||||
"seam_position": "nearest",
|
||||
"small_perimeter_speed": "30%",
|
||||
"thick_bridges": "1",
|
||||
"support_type": "tree(auto)",
|
||||
"support_style": "tree_slim",
|
||||
"support_on_build_plate_only": "1",
|
||||
"tree_support_wall_count": "1",
|
||||
"compatible_printers": [
|
||||
"KINARB 1HB 0.5 nozzle",
|
||||
"KINARB 2HB 0.5 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,70 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.25mm PP Draft @Pragostroj 0.5",
|
||||
"inherits": "process_common_kinarb",
|
||||
"from": "system",
|
||||
"setting_id": "uotzhmSKiQosuOpK",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.25",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"line_width": "0.5",
|
||||
"outer_wall_line_width": "0.5",
|
||||
"inner_wall_line_width": "0.5",
|
||||
"internal_solid_infill_line_width": "0.5",
|
||||
"top_surface_line_width": "0.5",
|
||||
"sparse_infill_line_width": "0.5",
|
||||
"support_line_width": "0.5",
|
||||
"initial_layer_line_width": "0.65",
|
||||
"brim_type": "no_brim",
|
||||
"skirt_loops": "2",
|
||||
"wall_sequence": "outer wall/inner wall",
|
||||
"sparse_infill_density": "5%",
|
||||
"gap_fill_target": "everywhere",
|
||||
"enable_arc_fitting": "1",
|
||||
"ooze_prevention": "1",
|
||||
"small_perimeter_speed": "30%",
|
||||
"small_perimeter_threshold": "5",
|
||||
"slow_down_layers": "3",
|
||||
"default_acceleration": "3000",
|
||||
"outer_wall_acceleration": "1000",
|
||||
"inner_wall_acceleration": "3000",
|
||||
"top_surface_acceleration": "2000",
|
||||
"travel_acceleration": "2000",
|
||||
"default_jerk": "5",
|
||||
"initial_layer_jerk": "5",
|
||||
"infill_jerk": "5",
|
||||
"inner_wall_jerk": "5",
|
||||
"outer_wall_jerk": "5",
|
||||
"top_surface_jerk": "5",
|
||||
"travel_jerk": "5",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"outer_wall_speed": "50",
|
||||
"inner_wall_speed": "60",
|
||||
"internal_solid_infill_speed": "50",
|
||||
"sparse_infill_speed": "60",
|
||||
"top_surface_speed": "50",
|
||||
"gap_infill_speed": "50",
|
||||
"travel_speed": "300",
|
||||
"enable_support": "1",
|
||||
"support_threshold_angle": "45",
|
||||
"support_speed": "50",
|
||||
"support_interface_speed": "30",
|
||||
"support_top_z_distance": "0.25",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_object_xy_distance": "0.6",
|
||||
"support_filament": "1",
|
||||
"support_interface_filament": "1",
|
||||
"support_interface_pattern": "concentric",
|
||||
"support_interface_spacing": "0",
|
||||
"support_bottom_interface_spacing": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "3",
|
||||
"independent_support_layer_height": "0",
|
||||
"raft_layers": "4",
|
||||
"raft_contact_distance": "0.25",
|
||||
"compatible_printers": [
|
||||
"KINARB 1HB 0.5 nozzle",
|
||||
"KINARB 2HB 0.5 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,36 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.25mm quality @Pragostroj 0.5 - 100mms",
|
||||
"inherits": "0.25mm quality @Pragostroj 0.5",
|
||||
"from": "system",
|
||||
"setting_id": "nyKu5sqYzWCtSZhD",
|
||||
"instantiation": "true",
|
||||
"brim_type": "outer_only",
|
||||
"default_acceleration": "2000",
|
||||
"default_jerk": "5",
|
||||
"initial_layer_jerk": "5",
|
||||
"infill_jerk": "5",
|
||||
"inner_wall_jerk": "5",
|
||||
"outer_wall_jerk": "5",
|
||||
"top_surface_jerk": "5",
|
||||
"travel_jerk": "5",
|
||||
"gap_infill_speed": "100",
|
||||
"initial_layer_infill_speed": "30",
|
||||
"inner_wall_speed": "100",
|
||||
"outer_wall_speed": "100",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"sparse_infill_speed": "100",
|
||||
"support_speed": "100",
|
||||
"top_surface_speed": "100",
|
||||
"independent_support_layer_height": "0",
|
||||
"support_bottom_z_distance": "0.4",
|
||||
"support_top_z_distance": "0.6",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_style": "default",
|
||||
"tree_support_wall_count": "2",
|
||||
"wall_loops": "3",
|
||||
"compatible_printers": [
|
||||
"KINARB 1HB 0.5 nozzle",
|
||||
"KINARB 2HB 0.5 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,30 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.25mm quality @Pragostroj 0.5",
|
||||
"inherits": "process_common_kinarb",
|
||||
"from": "system",
|
||||
"setting_id": "BHxfmm9Dw2Thb8Tq",
|
||||
"instantiation": "true",
|
||||
"bottom_shell_thickness": "0.5",
|
||||
"bridge_acceleration": "1000",
|
||||
"bridge_speed": "22",
|
||||
"infill_anchor": "2.5",
|
||||
"infill_anchor_max": "20",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"internal_solid_infill_line_width": "0.5",
|
||||
"layer_height": "0.25",
|
||||
"line_width": "0.5",
|
||||
"outer_wall_line_width": "0.5",
|
||||
"raft_contact_distance": "0.2",
|
||||
"seam_position": "nearest",
|
||||
"small_perimeter_speed": "30%",
|
||||
"sparse_infill_line_width": "0.6",
|
||||
"support_line_width": "0.5",
|
||||
"thick_bridges": "1",
|
||||
"top_shell_thickness": "1.2",
|
||||
"top_surface_line_width": "0.5",
|
||||
"support_type": "tree(auto)",
|
||||
"support_style": "tree_slim",
|
||||
"support_on_build_plate_only": "1",
|
||||
"tree_support_wall_count": "1"
|
||||
}
|
||||
@@ -1,36 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.2mm Draft @Pragostroj 0.4",
|
||||
"inherits": "process_common_kinarb",
|
||||
"from": "system",
|
||||
"setting_id": "DnxEaeXfPHl4FCyQ",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.2",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"line_width": "0.4",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"inner_wall_line_width": "0.4",
|
||||
"internal_solid_infill_line_width": "0.4",
|
||||
"top_surface_line_width": "0.4",
|
||||
"sparse_infill_line_width": "0.48",
|
||||
"support_line_width": "0.4",
|
||||
"bottom_shell_thickness": "0.4",
|
||||
"top_shell_thickness": "1.2",
|
||||
"bridge_acceleration": "1000",
|
||||
"bridge_speed": "22",
|
||||
"infill_anchor": "2.5",
|
||||
"infill_anchor_max": "20",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"raft_contact_distance": "0.2",
|
||||
"seam_position": "nearest",
|
||||
"small_perimeter_speed": "30%",
|
||||
"thick_bridges": "1",
|
||||
"support_type": "tree(auto)",
|
||||
"support_style": "tree_slim",
|
||||
"support_on_build_plate_only": "1",
|
||||
"tree_support_wall_count": "1",
|
||||
"compatible_printers": [
|
||||
"KINARB 1HB 0.4 nozzle",
|
||||
"KINARB 2HB 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,36 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.3mm Draft @Pragostroj 0.6",
|
||||
"inherits": "process_common_kinarb",
|
||||
"from": "system",
|
||||
"setting_id": "7McRpzXpjKxZG5Bj",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.3",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"line_width": "0.6",
|
||||
"outer_wall_line_width": "0.6",
|
||||
"inner_wall_line_width": "0.6",
|
||||
"internal_solid_infill_line_width": "0.6",
|
||||
"top_surface_line_width": "0.6",
|
||||
"sparse_infill_line_width": "0.72",
|
||||
"support_line_width": "0.6",
|
||||
"bottom_shell_thickness": "0.6",
|
||||
"top_shell_thickness": "1.8",
|
||||
"bridge_acceleration": "1000",
|
||||
"bridge_speed": "22",
|
||||
"infill_anchor": "2.5",
|
||||
"infill_anchor_max": "20",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"raft_contact_distance": "0.2",
|
||||
"seam_position": "nearest",
|
||||
"small_perimeter_speed": "30%",
|
||||
"thick_bridges": "1",
|
||||
"support_type": "tree(auto)",
|
||||
"support_style": "tree_slim",
|
||||
"support_on_build_plate_only": "1",
|
||||
"tree_support_wall_count": "1",
|
||||
"compatible_printers": [
|
||||
"KINARB 1HB 0.6 nozzle",
|
||||
"KINARB 2HB 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,24 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.40mm quality @Pragostroj 0.8",
|
||||
"inherits": "process_common_kinarb",
|
||||
"from": "system",
|
||||
"setting_id": "XLoULnlavbviCcUZ",
|
||||
"instantiation": "true",
|
||||
"bottom_shell_thickness": "0.8",
|
||||
"bridge_acceleration": "1000",
|
||||
"bridge_speed": "22",
|
||||
"infill_anchor": "2.5",
|
||||
"infill_anchor_max": "20",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"layer_height": "0.3",
|
||||
"raft_contact_distance": "0.2",
|
||||
"seam_position": "nearest",
|
||||
"small_perimeter_speed": "30%",
|
||||
"thick_bridges": "1",
|
||||
"top_shell_thickness": "1.2",
|
||||
"support_type": "tree(auto)",
|
||||
"support_style": "tree_slim",
|
||||
"support_on_build_plate_only": "1",
|
||||
"tree_support_wall_count": "1"
|
||||
}
|
||||
@@ -1,36 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.4mm Draft @Pragostroj 0.8",
|
||||
"inherits": "process_common_kinarb",
|
||||
"from": "system",
|
||||
"setting_id": "p9fnYWI05pAMip1O",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.4",
|
||||
"initial_layer_print_height": "0.4",
|
||||
"line_width": "0.8",
|
||||
"outer_wall_line_width": "0.8",
|
||||
"inner_wall_line_width": "0.8",
|
||||
"internal_solid_infill_line_width": "0.8",
|
||||
"top_surface_line_width": "0.8",
|
||||
"sparse_infill_line_width": "0.96",
|
||||
"support_line_width": "0.8",
|
||||
"bottom_shell_thickness": "0.8",
|
||||
"top_shell_thickness": "2.4",
|
||||
"bridge_acceleration": "1000",
|
||||
"bridge_speed": "22",
|
||||
"infill_anchor": "2.5",
|
||||
"infill_anchor_max": "20",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"raft_contact_distance": "0.2",
|
||||
"seam_position": "nearest",
|
||||
"small_perimeter_speed": "30%",
|
||||
"thick_bridges": "1",
|
||||
"support_type": "tree(auto)",
|
||||
"support_style": "tree_slim",
|
||||
"support_on_build_plate_only": "1",
|
||||
"tree_support_wall_count": "1",
|
||||
"compatible_printers": [
|
||||
"KINARB 1HB 0.8 nozzle",
|
||||
"KINARB 2HB 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,68 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.4mm PP Draft @Pragostroj 0.8",
|
||||
"inherits": "process_common_kinarb",
|
||||
"from": "system",
|
||||
"setting_id": "ISlA6aEVcmZPI3dG",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.4",
|
||||
"initial_layer_print_height": "0.4",
|
||||
"line_width": "0.8",
|
||||
"outer_wall_line_width": "0.8",
|
||||
"inner_wall_line_width": "0.8",
|
||||
"internal_solid_infill_line_width": "0.8",
|
||||
"top_surface_line_width": "0.8",
|
||||
"sparse_infill_line_width": "0.85",
|
||||
"support_line_width": "0.8",
|
||||
"initial_layer_line_width": "0.9",
|
||||
"brim_type": "no_brim",
|
||||
"skirt_distance": "4",
|
||||
"wall_loops": "2",
|
||||
"top_shell_layers": "5",
|
||||
"bottom_shell_layers": "5",
|
||||
"sparse_infill_pattern": "cubic",
|
||||
"sparse_infill_density": "10%",
|
||||
"gap_fill_target": "everywhere",
|
||||
"bridge_no_support": "1",
|
||||
"top_solid_infill_flow_ratio": "0.95",
|
||||
"small_perimeter_speed": "30%",
|
||||
"small_perimeter_threshold": "10",
|
||||
"overhang_2_4_speed": "30",
|
||||
"default_acceleration": "3000",
|
||||
"outer_wall_acceleration": "1000",
|
||||
"inner_wall_acceleration": "3000",
|
||||
"top_surface_acceleration": "2000",
|
||||
"travel_acceleration": "1000",
|
||||
"default_jerk": "5",
|
||||
"initial_layer_jerk": "5",
|
||||
"infill_jerk": "5",
|
||||
"inner_wall_jerk": "5",
|
||||
"outer_wall_jerk": "5",
|
||||
"top_surface_jerk": "5",
|
||||
"travel_jerk": "5",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"outer_wall_speed": "30",
|
||||
"inner_wall_speed": "30",
|
||||
"internal_solid_infill_speed": "30",
|
||||
"sparse_infill_speed": "30",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"enable_support": "1",
|
||||
"support_threshold_angle": "40",
|
||||
"support_speed": "80",
|
||||
"support_interface_speed": "50",
|
||||
"support_top_z_distance": "0.25",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_object_xy_distance": "1",
|
||||
"support_base_pattern_spacing": "3",
|
||||
"support_interface_spacing": "0",
|
||||
"support_bottom_interface_spacing": "1",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "3",
|
||||
"raft_layers": "3",
|
||||
"compatible_printers": [
|
||||
"KINARB 1HB 0.8 nozzle",
|
||||
"KINARB 2HB 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,36 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.5mm Draft @Pragostroj 1.0",
|
||||
"inherits": "process_common_kinarb",
|
||||
"from": "system",
|
||||
"setting_id": "V4btYVHhZRsIttOy",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.5",
|
||||
"initial_layer_print_height": "0.5",
|
||||
"line_width": "1",
|
||||
"outer_wall_line_width": "1",
|
||||
"inner_wall_line_width": "1",
|
||||
"internal_solid_infill_line_width": "1",
|
||||
"top_surface_line_width": "1",
|
||||
"sparse_infill_line_width": "1.2",
|
||||
"support_line_width": "1",
|
||||
"bottom_shell_thickness": "1",
|
||||
"top_shell_thickness": "3",
|
||||
"bridge_acceleration": "1000",
|
||||
"bridge_speed": "22",
|
||||
"infill_anchor": "2.5",
|
||||
"infill_anchor_max": "20",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"raft_contact_distance": "0.2",
|
||||
"seam_position": "nearest",
|
||||
"small_perimeter_speed": "30%",
|
||||
"thick_bridges": "1",
|
||||
"support_type": "tree(auto)",
|
||||
"support_style": "tree_slim",
|
||||
"support_on_build_plate_only": "1",
|
||||
"tree_support_wall_count": "1",
|
||||
"compatible_printers": [
|
||||
"KINARB 1HB 1.0 nozzle",
|
||||
"KINARB 2HB 1.0 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,36 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.6mm Draft @Pragostroj 1.2",
|
||||
"inherits": "process_common_kinarb",
|
||||
"from": "system",
|
||||
"setting_id": "EWeIZrCxkPLs8m79",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.6",
|
||||
"initial_layer_print_height": "0.6",
|
||||
"line_width": "1.2",
|
||||
"outer_wall_line_width": "1.2",
|
||||
"inner_wall_line_width": "1.2",
|
||||
"internal_solid_infill_line_width": "1.2",
|
||||
"top_surface_line_width": "1.2",
|
||||
"sparse_infill_line_width": "1.44",
|
||||
"support_line_width": "1.2",
|
||||
"bottom_shell_thickness": "1.2",
|
||||
"top_shell_thickness": "3.6",
|
||||
"bridge_acceleration": "1000",
|
||||
"bridge_speed": "22",
|
||||
"infill_anchor": "2.5",
|
||||
"infill_anchor_max": "20",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"raft_contact_distance": "0.2",
|
||||
"seam_position": "nearest",
|
||||
"small_perimeter_speed": "30%",
|
||||
"thick_bridges": "1",
|
||||
"support_type": "tree(auto)",
|
||||
"support_style": "tree_slim",
|
||||
"support_on_build_plate_only": "1",
|
||||
"tree_support_wall_count": "1",
|
||||
"compatible_printers": [
|
||||
"KINARB 1HB 1.2 nozzle",
|
||||
"KINARB 2HB 1.2 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,36 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.8mm Draft @Pragostroj 1.6",
|
||||
"inherits": "process_common_kinarb",
|
||||
"from": "system",
|
||||
"setting_id": "seGh6lE18Y6Sx9mL",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.8",
|
||||
"initial_layer_print_height": "0.8",
|
||||
"line_width": "1.6",
|
||||
"outer_wall_line_width": "1.6",
|
||||
"inner_wall_line_width": "1.6",
|
||||
"internal_solid_infill_line_width": "1.6",
|
||||
"top_surface_line_width": "1.6",
|
||||
"sparse_infill_line_width": "1.92",
|
||||
"support_line_width": "1.6",
|
||||
"bottom_shell_thickness": "1.6",
|
||||
"top_shell_thickness": "4.8",
|
||||
"bridge_acceleration": "1000",
|
||||
"bridge_speed": "22",
|
||||
"infill_anchor": "2.5",
|
||||
"infill_anchor_max": "20",
|
||||
"internal_solid_infill_acceleration": "3000",
|
||||
"raft_contact_distance": "0.2",
|
||||
"seam_position": "nearest",
|
||||
"small_perimeter_speed": "30%",
|
||||
"thick_bridges": "1",
|
||||
"support_type": "tree(auto)",
|
||||
"support_style": "tree_slim",
|
||||
"support_on_build_plate_only": "1",
|
||||
"tree_support_wall_count": "1",
|
||||
"compatible_printers": [
|
||||
"KINARB 1HB 1.6 nozzle",
|
||||
"KINARB 2HB 1.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,106 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"reduce_crossing_wall": "0",
|
||||
"max_travel_detour_distance": "0",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bottom_shell_thickness": "0",
|
||||
"bridge_speed": "50",
|
||||
"brim_width": "5",
|
||||
"brim_object_gap": "0.1",
|
||||
"compatible_printers": [],
|
||||
"compatible_printers_condition": "",
|
||||
"print_sequence": "by layer",
|
||||
"default_acceleration": "3000",
|
||||
"initial_layer_acceleration": "500",
|
||||
"top_surface_acceleration": "2000",
|
||||
"travel_acceleration": "1000",
|
||||
"inner_wall_acceleration": "3000",
|
||||
"outer_wall_acceleration": "1000",
|
||||
"bridge_no_support": "1",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0",
|
||||
"enable_arc_fitting": "0",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"infill_direction": "45",
|
||||
"sparse_infill_density": "10%",
|
||||
"sparse_infill_pattern": "cubic",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"infill_combination": "0",
|
||||
"infill_wall_overlap": "25%",
|
||||
"interface_shells": "0",
|
||||
"ironing_flow": "10%",
|
||||
"ironing_spacing": "0.15",
|
||||
"ironing_speed": "30",
|
||||
"ironing_type": "no ironing",
|
||||
"reduce_infill_retraction": "1",
|
||||
"filename_format": "{input_filename_base}_{layer_height}mm_{filament_type[initial_tool]}_{printer_model}_{print_time}.gcode",
|
||||
"detect_overhang_wall": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"overhang_1_4_speed": "0",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "10",
|
||||
"line_width": "0.8",
|
||||
"inner_wall_line_width": "0.8",
|
||||
"outer_wall_line_width": "0.8",
|
||||
"top_surface_line_width": "0.8",
|
||||
"sparse_infill_line_width": "0.85",
|
||||
"initial_layer_line_width": "0.9",
|
||||
"internal_solid_infill_line_width": "0.8",
|
||||
"support_line_width": "0.8",
|
||||
"wall_loops": "2",
|
||||
"print_settings_id": "0.4mm Draft @Pragostroj 0.8",
|
||||
"raft_layers": "0",
|
||||
"seam_position": "aligned",
|
||||
"skirt_distance": "4",
|
||||
"skirt_height": "3",
|
||||
"min_skirt_length": "4",
|
||||
"skirt_loops": "0",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"spiral_mode": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"enable_support": "1",
|
||||
"resolution": "0.012",
|
||||
"support_type": "normal(auto)",
|
||||
"support_on_build_plate_only": "0",
|
||||
"support_top_z_distance": "0.25",
|
||||
"support_bottom_z_distance": "0.25",
|
||||
"support_filament": "0",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_top_layers": "3",
|
||||
"support_interface_bottom_layers": "3",
|
||||
"support_interface_spacing": "0",
|
||||
"support_interface_speed": "50",
|
||||
"support_base_pattern": "default",
|
||||
"support_base_pattern_spacing": "3",
|
||||
"support_speed": "80",
|
||||
"support_threshold_angle": "30",
|
||||
"support_object_xy_distance": "1",
|
||||
"tree_support_branch_angle": "30",
|
||||
"tree_support_wall_count": "0",
|
||||
"detect_thin_wall": "0",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_shell_thickness": "0.8",
|
||||
"enable_prime_tower": "0",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"prime_tower_width": "60",
|
||||
"xy_hole_compensation": "0",
|
||||
"xy_contour_compensation": "0",
|
||||
"layer_height": "0.4",
|
||||
"bottom_shell_layers": "5",
|
||||
"top_shell_layers": "5",
|
||||
"bridge_flow": "1",
|
||||
"initial_layer_speed": "30",
|
||||
"initial_layer_infill_speed": "45",
|
||||
"outer_wall_speed": "50",
|
||||
"inner_wall_speed": "80",
|
||||
"sparse_infill_speed": "80",
|
||||
"internal_solid_infill_speed": "80",
|
||||
"top_surface_speed": "80",
|
||||
"gap_infill_speed": "80",
|
||||
"travel_speed": "250"
|
||||
}
|
||||
@@ -1,16 +0,0 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "process_common_kinarb",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"initial_layer_infill_speed": "80",
|
||||
"bridge_speed": "25",
|
||||
"travel_jerk": "9",
|
||||
"outer_wall_jerk": "7",
|
||||
"inner_wall_jerk": "7",
|
||||
"default_jerk": "9",
|
||||
"internal_bridge_speed": "50",
|
||||
"initial_layer_acceleration": "700",
|
||||
"exclude_object": "1"
|
||||
}
|
||||
@@ -1,54 +0,0 @@
|
||||
{
|
||||
"name": "Printcepts",
|
||||
"version": "01.00.00.04",
|
||||
"force_update": "0",
|
||||
"description": "Printcepts belt printer configurations",
|
||||
"machine_model_list": [
|
||||
{
|
||||
"name": "BabyBelt Pro",
|
||||
"sub_path": "machine/BabyBelt Pro.json"
|
||||
}
|
||||
],
|
||||
"process_list": [
|
||||
{
|
||||
"name": "fdm_process_common",
|
||||
"sub_path": "process/fdm_process_common.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Standard @BabyBelt Pro",
|
||||
"sub_path": "process/0.20mm Standard @BabyBelt Pro.json"
|
||||
}
|
||||
],
|
||||
"filament_list": [
|
||||
{
|
||||
"name": "Generic PLA @BabyBelt Pro",
|
||||
"sub_path": "filament/Generic PLA @BabyBelt Pro.json"
|
||||
},
|
||||
{
|
||||
"name": "eSUN PLA @BabyBelt Pro",
|
||||
"sub_path": "filament/eSUN PLA @BabyBelt Pro.json"
|
||||
},
|
||||
{
|
||||
"name": "Generic PETG @BabyBelt Pro",
|
||||
"sub_path": "filament/Generic PETG @BabyBelt Pro.json"
|
||||
}
|
||||
],
|
||||
"machine_list": [
|
||||
{
|
||||
"name": "fdm_machine_common",
|
||||
"sub_path": "machine/fdm_machine_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_klipper_common",
|
||||
"sub_path": "machine/fdm_klipper_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_belt_common",
|
||||
"sub_path": "machine/fdm_belt_common.json"
|
||||
},
|
||||
{
|
||||
"name": "BabyBelt Pro 0.4 nozzle",
|
||||
"sub_path": "machine/BabyBelt Pro 0.4 nozzle.json"
|
||||
}
|
||||
]
|
||||
}
|
||||
@@ -1,70 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?>
|
||||
<svg xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink" width="95.0mm" height="500.0mm" viewBox="0 0 95.0 500.0" preserveAspectRatio="xMidYMid meet">
|
||||
<!-- Printcepts BabyBelt Pro bed texture: 95 x 500 mm belt plate. -->
|
||||
<!-- Transparent plate; green (#195F30) BabyBelt Pro logo centered along X, near the bottom edge. -->
|
||||
<rect x="0" y="0" width="95.0" height="500.0" fill="none"/>
|
||||
<g transform="translate(14.2500,436.3488) scale(0.067538)">
|
||||
<g transform="translate(-11.000000,692.938562) scale(0.100000,-0.100000)"
|
||||
fill="#195F30" stroke="none">
|
||||
<path d="M1963 5604 l-1423 -1324 0 -2050 0 -2050 443 0 c244 0 741 3 1105 7
|
||||
l662 6 0 746 c-1 575 -4 768 -14 841 -47 324 -179 486 -473 581 -40 12 -73 26
|
||||
-73 30 0 4 32 17 72 29 212 64 333 166 378 320 35 121 38 191 32 868 l-5 662
|
||||
-629 0 c-395 0 -628 4 -628 10 0 5 635 601 1410 1325 776 724 1410 1318 1410
|
||||
1321 0 2 -190 4 -422 3 l-423 0 -1422 -1325z m-334 -2029 c143 -16 174 -96
|
||||
173 -446 -2 -411 -24 -458 -224 -462 l-93 -2 -3 450 c-1 248 0 456 3 463 3 9
|
||||
18 12 47 8 24 -3 67 -8 97 -11z m-4 -1556 c160 -29 173 -62 182 -469 9 -455
|
||||
-14 -593 -108 -641 -39 -19 -193 -44 -210 -33 -10 6 -13 1147 -3 1157 6 6 45
|
||||
2 139 -14z"/>
|
||||
<path d="M3464 5979 c-142 -132 -263 -245 -268 -250 -6 -5 69 -9 190 -9 l199
|
||||
1 268 249 267 250 -198 0 -198 0 -260 -241z"/>
|
||||
<path d="M3650 5649 c-135 -126 -254 -238 -265 -249 -19 -20 -18 -20 177 -20
|
||||
l197 0 228 211 c125 116 246 229 268 250 l40 39 -200 -1 -200 0 -245 -230z"/>
|
||||
<path d="M2537 5089 c-101 -24 -204 -105 -251 -197 -96 -190 -19 -420 172
|
||||
-514 l67 -33 2670 0 2670 0 57 27 c74 34 146 107 184 183 43 88 43 230 0 322
|
||||
-35 76 -113 153 -193 191 l-58 27 -2640 2 c-1513 0 -2656 -3 -2678 -8z m5063
|
||||
-77 c-57 -37 -118 -111 -140 -168 -31 -82 -25 -206 12 -279 26 -49 93 -121
|
||||
133 -143 15 -8 -640 -11 -2410 -11 l-2430 0 30 21 c200 146 201 425 1 569
|
||||
l-39 29 2434 -1 c2263 0 2432 -1 2409 -17z m-4890 -43 c270 -122 185 -526
|
||||
-109 -522 -257 2 -370 324 -170 485 74 60 194 76 279 37z m5201 -12 c94 -55
|
||||
140 -135 140 -242 0 -285 -393 -374 -517 -117 -26 54 -30 162 -9 219 28 74 97
|
||||
139 173 164 53 17 166 4 213 -24z"/>
|
||||
<path d="M2917 3973 c-4 -174 -7 -550 -7 -835 l0 -518 326 0 326 0 -7 150 -7
|
||||
150 110 0 110 0 11 -32 c5 -18 26 -86 46 -150 l36 -118 325 0 c179 0 323 4
|
||||
320 9 -3 4 -155 374 -337 822 -182 448 -333 820 -336 827 -4 9 -105 12 -457
|
||||
12 l-453 0 -6 -317z m773 -745 c0 -5 -47 -8 -104 -8 l-103 0 -7 92 c-3 50 -6
|
||||
202 -5 337 l1 246 109 -330 c60 -181 109 -333 109 -337z"/>
|
||||
<path d="M4680 3455 l0 -835 448 0 c693 1 885 16 985 80 99 63 126 132 134
|
||||
340 12 327 -44 405 -342 476 -28 7 -27 8 25 19 199 42 255 95 267 248 11 146
|
||||
-32 285 -110 353 -145 126 -329 153 -1049 154 l-358 0 0 -835z m846 520 c36
|
||||
-23 44 -54 44 -162 0 -152 -29 -183 -170 -183 l-40 0 0 186 0 187 71 -6 c39
|
||||
-3 82 -13 95 -22z m4 -625 c33 -18 40 -52 40 -208 0 -200 -9 -214 -143 -228
|
||||
l-67 -7 0 233 0 233 74 -6 c41 -3 84 -10 96 -17z"/>
|
||||
<path d="M6150 4286 c0 -3 131 -242 290 -531 l290 -526 0 -304 0 -305 385 0
|
||||
385 0 0 299 0 299 305 533 305 534 -377 3 c-207 1 -381 -2 -385 -6 -16 -16
|
||||
-110 -258 -172 -444 l-62 -187 -18 77 c-18 75 -139 450 -171 525 l-15 37 -380
|
||||
0 c-209 0 -380 -2 -380 -4z"/>
|
||||
<path d="M2910 1355 l0 -1185 830 0 830 0 0 240 0 240 -350 0 -350 0 0 255 0
|
||||
255 300 0 300 0 0 230 0 230 -300 0 -300 0 0 220 0 220 320 0 320 0 0 240 0
|
||||
240 -800 0 -800 0 0 -1185z"/>
|
||||
<path d="M4680 1355 l0 -1185 775 0 775 0 0 240 0 240 -295 0 -295 0 0 945 0
|
||||
945 -480 0 -480 0 0 -1185z"/>
|
||||
<path d="M5800 2300 l0 -240 280 0 280 0 0 -945 0 -945 480 0 480 0 0 945 0
|
||||
945 285 0 285 0 0 240 0 240 -1045 0 -1045 0 0 -240z"/>
|
||||
<path d="M8032 1358 l-2 -1188 1008 1 c621 1 971 5 912 10 -309 27 -631 139
|
||||
-885 306 -593 391 -984 1122 -1025 1918 -4 77 -8 -394 -8 -1047z"/>
|
||||
<path d="M7441 1934 c-43 -36 -59 -70 -70 -148 -18 -124 16 -252 76 -291 32
|
||||
-21 226 -33 328 -20 114 14 161 97 153 269 -5 96 -24 151 -68 191 -20 18 -39
|
||||
20 -205 23 l-182 3 -32 -27z m389 -199 c7 -8 10 -22 6 -30 -4 -13 -34 -15
|
||||
-186 -15 -189 0 -202 3 -186 45 8 22 348 22 366 0z"/>
|
||||
<path d="M7450 1267 c-14 -6 -35 -32 -47 -57 -21 -41 -23 -58 -23 -222 l0
|
||||
-178 270 0 270 0 0 105 0 105 -121 0 -120 0 3 28 3 27 118 3 117 3 0 99 0 100
|
||||
-113 0 c-121 0 -138 -7 -162 -65 -8 -19 -9 -19 -12 2 -10 55 -116 84 -183 50z
|
||||
m134 -203 c15 -38 8 -44 -54 -44 -62 0 -69 6 -54 44 9 23 99 23 108 0z"/>
|
||||
<path d="M466 1193 l-29 -43 -163 0 -164 0 0 -235 0 -235 165 0 165 0 27 -42
|
||||
28 -42 3 163 c1 89 1 233 0 319 l-3 157 -29 -42z"/>
|
||||
<path d="M7443 620 c-48 -20 -58 -60 -61 -262 l-4 -188 271 0 271 0 0 110 0
|
||||
110 -110 0 -110 0 0 70 c0 76 -21 145 -51 160 -22 12 -176 12 -206 0z m161
|
||||
-186 c15 -39 8 -44 -64 -44 -72 0 -79 5 -64 44 9 23 119 23 128 0z"/>
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 4.5 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 55 KiB |
@@ -1,77 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PETG @BabyBelt Pro",
|
||||
"inherits": "Generic PETG @System",
|
||||
"from": "system",
|
||||
"setting_id": "gCzHpDNgVwQR6tgk",
|
||||
"instantiation": "true",
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"BabyBelt Pro 0.4 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Generic PETG @BabyBelt Pro"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"25"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"4"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"2"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Generic PETG @BabyBelt Pro — belt PETG, bed 80C"
|
||||
]
|
||||
}
|
||||
@@ -1,65 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PLA @BabyBelt Pro",
|
||||
"inherits": "Generic PLA @System",
|
||||
"from": "system",
|
||||
"setting_id": "24PpcnhVx9v5f4fD",
|
||||
"instantiation": "true",
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"BabyBelt Pro 0.4 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Generic PLA @BabyBelt Pro"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1.5"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"35"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Generic PLA @BabyBelt Pro — belt PLA, bed 75C"
|
||||
]
|
||||
}
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user