Across 6 files the literal "primary" string was the sentinel for "no IMEX
parallel mode active" — used for short-circuiting in serialization, ghost
visualization, zone calc, popup-menu list construction, the IMEXModesCtrl
non-deletable first row, and several layer-of-export checks. A typo in
any one would silently bypass the guard.
Define kImexPrimaryMode in IMEXHelpers.hpp with a docstring describing
what equality with it means semantically, and route every call site
through it. No behavior change.
Touched: bbs_3mf.cpp, GCode.cpp, PartPlate.cpp, Plater.cpp, Tab.cpp.
The bbs_3mf and Tab files now include IMEXHelpers.hpp; the other three
already did.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Four quick-fix items surfaced by pre-PR self-review.
GCodeViewer.cpp:1607
Null-check get_curr_plate() before dereferencing. Other call sites in
the file already guard; this was the only unguarded one in the IMEX
layer-preview path. In practice m_plate_list always has a plate, but
the inconsistency is easy to fix and removes the only ungated deref.
PartPlate.cpp:build_imex_cache_key
Cache key for IMEX zone geometry truncated nozzle_clearance_x/y to int
before stringifying — a config change from 30.0 to 30.5 would not
invalidate the cache. Match the *10 precision pattern already used for
imex_carriage_margin so 0.1 mm steps invalidate correctly.
Plater.cpp:select_plate_by_hover_id (right-click popup)
Two issues:
1. Lambda captured `modes` by reference. PopupMenu() is synchronous
today so the reference outlived the menu's event handling, but the
pattern is fragile — anyone refactoring to async Popup() would
silently dangle. Capture by value.
2. Used wxID_HIGHEST + i for menu item IDs — standard wx anti-pattern
because it can collide with other handlers listening in that range.
Allocate per-item IDs via wxNewId() and look up the chosen mode by
finding the event ID in a parallel vector. The lookup becomes O(N)
instead of O(1) but N is small (mode count) and this is clicker
latency, not a hot path.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* feat: Add flow rate calibration pattern selector dialog
* feat: Integrate PR #11881 and improve Flow Rate Calibration Wizard
- Integrated PR #11881: Display layer duration in G-code viewer position window.
- Enhanced Flow Rate Calibration:
- Implemented a Wizard dialog (FlowRateCalibrationDialog) using DPIDialog for Dark Mode support.
- Restricted pattern selection to 'Archimedean Chords' and 'Monotonic'.
- Integrated logic to pass the selected pattern to the calibration generation.
* fix(UI): Refactor FlowRateCalibrationDialog to calib_dlg for macOS build fix and UI consistency
Moved FlowRateCalibrationDialog from MainFrame.cpp to calib_dlg.hpp/.cpp to resolve build errors on macOS. Updated UI to match Pressure Advance calibration dialog style (Dark Mode support, RadioGroups). Logic moved to dialog class.
* Update Wiki link for flow rate calibration
* ui: replace RadioGroup with BitmapComboBox for Flow Rate pattern selection
* fix(ui): use custom ComboBox widget for Flow Rate Calibration
Replaces wxBitmapComboBox with OrcaSlicer's custom ComboBox widget to fix rendering issues on Windows (empty selection) and compilation errors on Linux.
* Refactor: Cleanup unused includes and members in FlowRate calibration dialog
* Fix: Complete rename of Flow Rate to Flow ratio in calibration menus after merge
* Fix: Update Flow Rate to Flow Ratio in Calibration Dialog and Wiki Link
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Using bbs versioning for bbs atributes
* Orca tags
* Bump SLIC3R version to match current BBS
* New import logic
* to_string_sf
* 2.3.2 No tagged
* Update comment
Centralize the project→printer→printer_extruder_id fallback for the physical
extruder map. PrintApply, PartPlate (ghost color + cache key), Plater (tooltip
+ click gate) all previously open-coded the three-step lookup, and each handled
the "pem unset, derive from pei" case slightly differently — an IDEX printer
without an explicit pem could paint an UNPRINTABLE_COLOR ghost even though the
slicer would have derived a valid mapping.
- IMEXHelpers: add effective_physical_extruder_map(explicit_pem, pei) and a
PresetBundle overload that wraps the project→printer precedence.
- PrintApply: use the helper in place of the inline pei→pem normalization.
- PartPlate / Plater: call the PresetBundle overload at every ghost-color,
ghost-cache-key, tooltip, and click-gate site.
- Plater::format_imex_ghost_tooltip: when no filament resolves to a head,
surface an actionable message directing the user to extend the extruder
count in the Machine tab, instead of the generic "(no filament routed)".
- IMEXFilamentPickerPopover: hold m_pem by value so callers can pass a
stack-local derived pem without lifetime worries.
- Tests: 5 new cases covering explicit-wins, default-pem fallback, null
inputs, and the IDEX ghost-color regression that motivated this.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
PartPlate::calc_imex_zones, GCodeViewer::render, and Plater::collect_imex_warnings
each hand-rolled their own "phys:P/C/M" tokenizer with subtly different error
handling. Replace the three inline loops with parse_imex_active_tools +
imex_primary_tool_for_mode so the Primary/Copy/Mirror classification agrees
across zones, the G-code viewer legend, and slice warnings.
No behavior change: the shared helpers preserve the 1=Primary / 2=Copy /
3=Mirror encoding already consumed downstream and continue to accept the
legacy bare-index form as Primary.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
Replaces the plater-icon popover with colored transparent ghost copies
of primary-head instances on the plate, one per secondary active head
under its Copy/Mirror role transform. Left-click on a ghost opens a
compact filament picker popover for the ghost's head (MMU lane override).
Ghosts track the primary through drag/rotate/scale/mirror and invalidate
on mode or pem changes.
Key pieces:
IMEXHelpers -- imex_head_transform (Primary/Copy/Mirror), shared role
parser, per-head filament resolution with X-axis Mirror anchor.
PartPlate -- ghost state, volume rebuild on mode/map/object mutation,
primary_origin plumbed for Mirror reflection across the primary-row
gantry plane.
GLCanvas3D -- ghost rendering with per-head filament color and
translucent blending; picking routed via volume composite id.
Plater -- ghost click + tooltip; plater icon left-click always cycles.
IMEXFilamentPickerPopover -- BitmapComboBox row for one secondary head,
writes imex_head_filament_map on selection.
bbs_3mf -- round-trip the per-plate imex_head_filament_map option.
PrintConfig -- add imex_head_filament_map as a plate option.
MMU/AFC routing for parallel modes relies on the printer profile's
physical_extruder_map (see prior commit for authoring format). Primary-
row heads and their per-plate filament overrides are resolved through
that map, so PA and temperature emission address the correct physical
extruder when multiple logical slots share one carriage.
Tests: IMEXHelpers coverage for Primary/Copy/Mirror transforms
including a 2x2 off-row regression guard for the X-axis reflection fix.
# Description
<!--
> Please provide a summary of the changes made in this PR. Include details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be considered?
-->
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the changes made in this PR.
-->
* identified code for snapping to buidlplate
* rename internal name to ensure_on_bed to be consistent, saves option in 2mf, finish Move UI, use in both ensure_on_bed() functions
* makes auto_drop a per-object setting, removes global setting
* remove adUndef, add auto_drop to constructor/serialize
* fixes drop() button
* add "auto_drop" checkmark to "load as single object" dialog,
nothing changes if auto_drop == yes || "load as single object",
if auto_drop == false and "load as single object" == false the objects now retain their relative position to each other
* retains auto_drop (and printable) state when assembling or splitting objects,
adds ObjectList::printable_state_changed() overload to be able to only provide ModelObject* vector
* adds dialog when splitting to ask if auto_drop should be disabled,
only shows when auto_drop enabled and atleast one volume floating
* adds arrow indicator on bounding box if auto_drop == false
* removes unneeded code, keeps "auto_drop" naming consistent
* makes for loop simpler in set_printable, set_auto_drop and get_auto_drop,
makes get_auto_drop const,
fixes wording in Snapshot text
---------
Co-authored-by: Hanno Witzleb <hannowitzleb@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Replaces MessageDialog with RichMessageDialog to show a suppress
checkbox on both slice-plate and slice-all warning paths. Persists
the choice to app_config as imex_pre_slice_warnings=false. Adds a
re-enable toggle in Printer Settings → Multimaterial → IDEX/IQEX
Configuration so the warnings can be restored if suppressed accidentally.
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
Temperature emission (GCode.cpp, PrintConfig.cpp, ConfigManipulation.cpp):
- Set temperatures for all active tools in layer_change_gcode for iMEX
parallel modes (primary + secondary carriages)
- Fix filament temperature commands so Layer 1 temperatures only emit on
the first layer; subsequent layers use normal layer-change temperatures
- Remove stray temperature commands that fired outside the intended context
- Consolidate iMEX temperature handling into the second-layer transition;
clean up emission logic and naming throughout
Pre-slice warning dialogs (PartPlate.cpp/hpp, Plater.cpp):
- Collect per-plate IMEX warnings before slicing: multi-material conflict,
bed temperature mismatch between carriages (>5 °C delta), and filament
type incompatibility
- Show a dismissible Yes/No dialog from both "Slice Plate" and "Slice All"
actions; No returns to 3D view, Yes proceeds to slice
- Refresh plate thumbnails after the panel switch so previously-generated
thumbnails are not left black
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* Add runtime display backend detection for Wayland support
Add LinuxDisplayBackend utility to detect X11 vs Wayland at runtime
using GDK_IS_X11_DISPLAY / GDK_IS_WAYLAND_DISPLAY macros. This is
the foundation for removing the forced GDK_BACKEND=x11 and enabling
native Wayland support.
- New files: LinuxDisplayBackend.hpp/.cpp with get_linux_display_backend(),
is_running_on_wayland(), and is_running_on_x11()
- Propagate wxHAVE_GDK_X11 / wxHAVE_GDK_WAYLAND from FindGTK3.cmake
as compile definitions to libslic3r_gui
- No-op on non-Linux platforms (returns Unknown / false)
* Fix Phase 1 code quality: pragma once, source ordering, static cache
* Make X11 initialization conditional for Wayland support
Remove the unconditional GDK_BACKEND=x11 force that blocked native
Wayland. Replace with conditional logic:
- EGL safety fallback: re-force X11 only when wxUSE_GLCANVAS_EGL is
off and WAYLAND_DISPLAY is set, with a warning log
- XInitThreads() only called when DISPLAY is set (X11 in use)
- __GLX_VENDOR_LIBRARY_NAME only set when DISPLAY is present (GLX-specific)
- WEBKIT_DISABLE_COMPOSITING_MODE only set under XWayland (both
DISPLAY and WAYLAND_DISPLAY present)
- Guard X11/Xlib.h include with __has_include for robustness
- Restore display validation to accept either DISPLAY or WAYLAND_DISPLAY
This is Phase 2 of the Wayland support plan.
* Fix Phase 2: safer EGL macro check, add clarifying comments
* Add GLAD2 library and replace GLEW linkage in build system
Set up GLAD2 as a static library to replace GLEW for OpenGL loading.
GLAD2 supports both GLX and EGL, which is required for Wayland support.
- Create src/glad/ with pre-generated GLAD2 sources (GL 4.6 compat)
- Add src/glad/CMakeLists.txt building glad as a static library
- Wire glad into src/CMakeLists.txt before libvgcode
- Modify libvgcode to use shared glad for GL path (keeps local copy
only for GLES2/Emscripten) to avoid duplicate symbol conflicts
- Replace GLEW::GLEW with glad in libslic3r_gui link libraries
Note: GLEW is kept in deps for OpenCSG. Code migration from GL/glew.h
to glad/gl.h headers will follow in Phase 3B+3C.
* Fix Phase 3A+3D: libvgcode GLAD include, dead files, dlopen dep, OpenGL link var
* Migrate from GLEW to GLAD: replace headers and API calls across codebase
Replace all #include <GL/glew.h> with <glad/gl.h> across 49 source files.
Migrate GLEW API calls to GLAD equivalents:
- glewInit/glewExperimental -> gladLoaderLoadGL()
- GLEW_EXT_* / GLEW_ARB_* extension checks -> GLAD_GL_EXT_* / GLAD_GL_ARB_*
- Remove GLEW-specific EGL/GLX mismatch #error guards (not needed with GLAD)
- Replace unavailable EXT symbols with core GL equivalents in
GLCanvas3D.cpp (GL_MAX_SAMPLES, glRenderbufferStorageMultisample,
glBlitFramebuffer, GL_READ/DRAW_FRAMEBUFFER)
- Update log messages from glewInit to gladLoadGL
* Fix Phase 3B+3C: remove GLEW find, clean EXT symbols, update attribution
- Remove find_package(GLEW) block from root CMakeLists.txt since GLEW
is no longer linked by any main application code
- Remove "glew" from SLIC3R_STATIC option description
- Replace all remaining EXT framebuffer symbols with core equivalents
in render_thumbnail_framebuffer_ext and _rectangular_selection_picking_pass
- Update AboutDialog credits from GLEW to GLAD
* Enable EGL in wxWidgets and add runtime GLX/EGL selection for Wayland
- Set wxUSE_GLCANVAS_EGL=ON in wxWidgets build and Flatpak manifest
- Add PreferGLX() call on X11 sessions for driver compatibility
- Remove Phase 2 safety fallback (EGL is now always compiled in)
- Guard SwapBuffers against hidden canvases to prevent Wayland stalls
* Fix Phase 4: move PreferGLX to app startup, fix FPS counter guard
Move wxGLCanvas::PreferGLX() from OpenGLManager::create_wxglcanvas()
(static initializer) to GUI_App::on_init_inner() before any wxGLCanvas
is constructed. This prevents a race where SkipPartCanvas could trigger
wxGLBackend::Init() before the GLX preference is set. The new location
also adds explicit is_running_on_wayland() detection with a warning for
unknown backends.
Move increment_fps_counter() inside the IsShownOnScreen() guard so FPS
is only counted when a frame is actually swapped.
* Update GLFW from 3.3.7 to 3.4 for runtime Wayland/X11 backend selection
Replace the compile-time GLFW_USE_WAYLAND flag (which locked to a single
backend) with GLFW 3.4's GLFW_BUILD_WAYLAND + GLFW_BUILD_X11 flags that
build both backends and auto-select at runtime based on the available
display server. This enables the CLI thumbnail renderer to work on both
Wayland and X11 sessions without separate builds.
* wayland: Fix UI call sites that rely on global screen coordinates
On Wayland, wxGetMousePosition() returns (0,0) and SetPosition() is a
no-op for top-level windows. Fix the highest-impact call sites:
- GLCanvas3D: Use cached m_mouse.position from event handlers instead
of wxGetMousePosition() + ScreenToClient() in get_local_mouse_position()
- Plater: Use event-relative coords via ClientToScreen(e.GetPosition())
instead of wxGetMousePosition() in 3 leave-window handlers
- BBLTopbar: Use event.GetPosition() and FindToolByPosition() directly
in mouse handlers instead of wxGetMousePosition()/FindToolByCurrentPosition()
- Search: Use focus-based dismiss logic on Wayland instead of
wxGetMousePosition()-based rect checks in SearchDialog and
SearchObjectDialog
- GUI_App: Skip SetPosition() in window_pos_restore() on Wayland where
it is a no-op; still restore size and maximize state
- Button: Position tooltip relative to button widget via ClientToScreen
instead of wxGetMousePosition()
* Fix SearchDialog Wayland dismiss: guard against search_line focus
* flatpak: Add Wayland socket permission for native Wayland support
* spec
* Fix crash on Wayland when wxWidgets lacks EGL support
Restore the safety fallback that forces GDK_BACKEND=x11 when wxWidgets
was not built with wxUSE_GLCANVAS_EGL=ON. Without this, the GLX backend
tries to access a non-existent X11 display on native Wayland, crashing
in wxGLCanvas::IsDisplaySupported() with SIGSEGV at offset 0xe4.
Also add a defense-in-depth guard in detect_multisample() that skips
the IsDisplaySupported call entirely on Wayland without EGL.
Root cause: deps/wxWidgets must be rebuilt after enabling EGL. The
compile-time check in OrcaSlicer.cpp detects the mismatch and falls
back safely.
* Fix EGL detection: use wxHAS_EGL instead of wxUSE_GLCANVAS_EGL
wxUSE_GLCANVAS_EGL is a CMake build option, NOT a C++ preprocessor
macro. The actual macro defined in wxWidgets setup.h is wxHAS_EGL.
All compile-time EGL checks were using the wrong macro, causing
the safety fallback to always trigger even with a properly built
EGL-enabled wxWidgets.
* Fix GL function pointers invalidated on Wayland/EGL
gladLoaderLoadGL() dlopen's libGL.so.1 to resolve GL function pointers
via dlsym, then immediately dlclose's the handle. On X11/GLX this is
fine because the GLX context keeps libGL.so mapped. On Wayland/EGL,
nothing else holds libGL.so open, so dlclose unmaps it and all function
pointers become dangling — causing SIGSEGV on the first GL call.
Fix: on Wayland, use gladLoadGL(eglGetProcAddress) which resolves
function pointers through the EGL loader without opening/closing
libGL.so.
* fix crash on start and various rendering issues
* fix crash on close
* small refactor
* move GPU selection to desktop file
* clean up a bit
* clean up more
* fix appimage error
- Add warning badge (obj_warning.svg overlay) to the iMEX plate icon when
a parallel mode is active alongside multi-material objects on the same plate
- Add has_imex_multimaterial_conflict() using get_extruders(true) so only
filaments actually used on the plate are checked
- Move multi-material caution dialog from reslice() into on_action_slice_plate /
on_action_slice_all so it fires exactly once per user action and does not
disrupt GL thumbnail generation during Slice All
- Fix is_imex missing from p->config init key list so on_config_change()
diff detection correctly triggers refresh_imex_icons()
- Defer imex_changed handling until after set_bed_shape() so m_shape is current
- Replace plain remove button with ScalableButton (imex_remove.svg) in mode rows
- Add EditGCodeDialog launch button per mode row for placeholder browsing
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
IMEXModesCtrl:
- Primary mode is now a non-deletable first row stored as sentinel
"primary" in imex_mode_names; older configs load cleanly
- New rows default T0 → Primary when no tool assignment is stored
- Filter "primary" from plater popup/cycle list to prevent double entry
- imex_tools_per_gantry cap raised 2 → 4
Zone sizing:
- Zone width/height now based on active tool count only; inactive tools
donate their bed share to active neighbors (fixes 4-tool layout)
- Active col/row maps (col_to_zone/row_to_zone) applied consistently
across zone fills, collision strips, and primary zone box
GCodeViewer animation:
- Mirror position formula fixed: left-of-copy reflects across copy
zone's left edge; right-of-copy reflects across right edge
(T3 was rendering on top of T1)
- strip_width/row_strip_height use active counts, matching PartPlate
Stability:
- Early return in calc_imex_zones() when tool_states is empty; prevents
OOB crash on new printer with stale process-preset mode name
- is_imex toggle in on_config_change calls refresh_imex_icons() so the
plate mode icon appears without requiring a new project
GCode:
- Remove "primary" guard so Primary mode gcode field is emitted at
start of print
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
- Add per-plate iXex mode icon to the plate toolbar (normal, hover, dark, dark-hover SVG variants)
- Left-click cycles through available modes; right-click shows a popup menu with all modes as radio items
- Mode changes are recorded in the undo/redo snapshot system
- Fix double context menu: suppress EVT_GLCANVAS_PLATE_RIGHT_CLICK and EVT_GLCANVAS_RIGHT_CLICK when the iXex icon popup was already shown
- Remove ixex_parallel_mode combo from Print Settings > Other > Special mode (superseded by per-plate icon)
- Remove dead code: refresh_ixex_mode_combo(), m_ixex_mode_combo member, related Tab reload hook
- iXex mode persisted in 3MF project files via existing plate metadata serialization
Co-Authored-By: Claude Sonnet 4.6 <noreply@anthropic.com>
* Union ex brims
Revert "Union ex brims"
This reverts commit bbc9a39faf318dc2df093eb2bdcebf19a4162fe9.
Update Brim.cpp
* dont repeat paths
* Update Brim.cpp
* multimaterial brim independiente
* Normal brim if is by object
* fix print order
* cleaning 1
* cleaning 2
* Normal brim if multimaterial on first layer
* fix artifact
* combine_brim optional
refactoring
* refactoring gcode.cpp
* refactoring brim.cpp
Update Brim.cpp
* Remove multimaterial first-layer check for brims
Stop detecting extruders used on the first layer and remove the is_multimaterial_first_layer guard. Simplify can_combine_brims to only consider combine_brims and whether printing is ByObject, allowing brims to be combined across extruders unless printing by object or combine_brims is disabled. Cleans up unused code and simplifies brim-generation conditions.
* Remove material specification from unified brim comment
* Update PrintConfig.cpp
Introduces first-class parallel printing (copy/mirror modes) for printers
with multiple independent X-axis carriages. Branded iXex (independent X
extruder), targeting Klipper firmware with a firmware-agnostic design.
- PrintConfig: new printer options declaring iXex capability and geometry
(is_ixex, ixex_gantry_count, ixex_tools_per_gantry, carriage dims,
tool layout, and per-mode name/role/gcode arrays)
- Preset: iXex keys registered in printer and process preset option lists
- Tab: IXexModesCtrl visual grid editor in Printer preset tab; mode
dropdown in Process → Others tab; clear_pages() nulls iXex pointers to
prevent dangling-pointer crash on preset save
- PartPlate: 2D zone visualization (active/dimmed/dividers) and
placement-violation detection (has_ixex_placement_violations) that
blocks slicing when objects fall outside the primary zone
- Plater: violation detection wired into update_background_process so
the Slice button is disabled with an error notification on violation
- GCode: mode-activation G-code injected before machine_start_gcode
- GCodeViewer: multi-carriage toolhead markers in sequential preview,
filament legend annotated with active carriage count and mode name
- Plater: use Add() instead of wxArrayString(size_t, wxString) ctor
- Search: change sep from std::wstring to wxString for concatenation
- SendMultiMachinePage: replace wxList::Node* with compatibility_iterator
(Node type removed in wx 3.3 with wxUSE_STD_CONTAINERS=ON)
- PhysicalPrinterDialog: disambiguate set_values() call with explicit
std::vector<std::string> (wxArrayString now also matches initializer list)
- Preferences: use ToStdString() instead of mb_str() for std::string comparison
- Plater: use wxString::FromUTF8() for wxArrayString constructor argument
In wxWidgets 3.3, wxWindow::Raise() no longer implies Show(). Add
explicit Show() before Raise() in two event handlers that activate the
main frame from another instance (load model, start download), and swap
the Show/Raise order in bring_instance_forward() so Show() precedes
Raise().
wxWidgets 3.2+ asserts on invalid sizer flag combinations where
wxEXPAND (which fills the entire space in the secondary direction)
is combined with wxALIGN_* flags (which are meaningless when expanding).
Remove the conflicting wxALIGN_* flags from all 112 occurrences across
21 files, keeping wxEXPAND and any non-conflicting flags intact.
* optimize resize feature on Linux
* fix the black screen issue on app startup on Linux
* Fixed an issue that Filament Grouping dialog always popup on Linux
* Fix an issue that on Linux the project name or model file name was not displayed in title bar
* Fix extruder_id out-of-bounds in switch_excluder
Added a check to reset extruder_id to 0 if it exceeds the size of nozzle_volumes or extruders, preventing potential out-of-bounds access.
Co-Authored-By: Christopher R. Palmer <1305033+crpalmer@users.noreply.github.com>
* Add custom nozzle diameter option in sidebar
Ensures that if the actual nozzle diameter is not present in the list, it is added as a custom option. This improves user experience by allowing selection of non-standard nozzle diameters.
Refactor nozzle diameter selection logic in Sidebar
Simplified the logic for updating the extruder nozzle diameter combo box by removing redundant checks and streamlining the addition of custom nozzle diameters. This improves code clarity and ensures the actual nozzle diameter from the printer config is always considered.
Co-Authored-By: yw4z <yw4z@outlook.com>
* Prevent profile switch if selected diameter matches nozzle
Adds a check in Sidebar::priv::switch_diameter to avoid switching printer profiles when the selected diameter matches the current nozzle diameter in the configuration. This prevents unnecessary profile changes and improves user experience.
---------
Co-authored-by: Christopher R. Palmer <1305033+crpalmer@users.noreply.github.com>
Co-authored-by: yw4z <yw4z@outlook.com>
This PR adds a new filament sync mode setting for device-based filament synchronization.
Users can now choose between syncing both filament preset + color (current behavior) or syncing color only, so calibrated local filament profiles are preserved while still updating slot colors from the printer.
It also includes small UI improvements for the new preference entry and sync status messaging.
<img width="665" height="671" alt="image" src="https://github.com/user-attachments/assets/23980846-0113-48ab-84aa-adf5cdab8ab6" />
