mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-10 17:21:10 +00:00
Merge remote-tracking branch 'upstream/main'
This commit is contained in:
Clifford Garwood
@@ -160,6 +160,7 @@ jobs:
|
||||
runner: ubuntu-24.04-arm
|
||||
# Don't run scheduled builds on forks; skip entirely on self-hosted runners
|
||||
if: ${{ !cancelled() && !vars.SELF_HOSTED && (github.event_name != 'schedule' || github.repository == 'OrcaSlicer/OrcaSlicer') }}
|
||||
|
||||
runs-on: ${{ matrix.variant.runner }}
|
||||
env:
|
||||
date:
|
||||
|
||||
@@ -44,7 +44,7 @@ If you come across any of these in search results, please <b>report them</b> as
|
||||
|
||||
# Main features
|
||||
|
||||
- **[Advanced Calibration Tools](https://www.orcaslicer.com/wiki/Calibration)**
|
||||
- **[Advanced Calibration Tools](https://www.orcaslicer.com/wiki/calibration_guide)**
|
||||
Comprehensive suite: temperature towers, flow rate, retraction & more for optimal performance.
|
||||
- **[Precise Wall](https://www.orcaslicer.com/wiki/quality_settings_precision#precise-wall) and [Seam Control](https://www.orcaslicer.com/wiki/quality_settings_seam)**
|
||||
Adjust outer wall spacing and apply scarf seams to enhance print accuracy.
|
||||
@@ -71,7 +71,7 @@ If you come across any of these in search results, please <b>report them</b> as
|
||||
The [wiki](https://www.orcaslicer.com/wiki) aims to provide a detailed explanation of the slicer settings, including how to maximize their use and how to calibrate and set up your printer.
|
||||
|
||||
- **[Access the wiki here](https://www.orcaslicer.com/wiki)**
|
||||
- **[Contribute to the wiki](https://www.orcaslicer.com/wiki/How-to-wiki)**
|
||||
- **[Contribute to the wiki](https://www.orcaslicer.com/wiki/how_to_wiki)**
|
||||
|
||||
# Download
|
||||
|
||||
@@ -144,7 +144,7 @@ winget install --id=SoftFever.OrcaSlicer -e
|
||||
|
||||
# How to Compile
|
||||
|
||||
All updated build instructions for Windows, macOS, and Linux are now available on the official [OrcaSlicer Wiki - How to build](https://www.orcaslicer.com/wiki/How-to-build) page.
|
||||
All updated build instructions for Windows, macOS, and Linux are now available on the official [OrcaSlicer Wiki - How to build](https://www.orcaslicer.com/wiki/how_to_build) page.
|
||||
|
||||
Please refer to the wiki to ensure you're following the latest and most accurate steps for your platform.
|
||||
|
||||
|
||||
@@ -113,7 +113,7 @@ msgid "Latest version"
|
||||
msgstr "Última versión"
|
||||
|
||||
msgid "Support Painting"
|
||||
msgstr "Pintar Soportes"
|
||||
msgstr "Pintar soportes"
|
||||
|
||||
msgid "Ctrl+"
|
||||
msgstr "Ctrl+"
|
||||
@@ -125,7 +125,7 @@ msgid "Shift+"
|
||||
msgstr "Shift+"
|
||||
|
||||
msgid "Mouse wheel"
|
||||
msgstr "Rueda de ratón"
|
||||
msgstr "Rueda del ratón"
|
||||
|
||||
msgid "Section view"
|
||||
msgstr "Vista de la sección"
|
||||
@@ -201,7 +201,7 @@ msgid "No auto support"
|
||||
msgstr "No auto soportes"
|
||||
|
||||
msgid "Support Generated"
|
||||
msgstr "Soportes Generados"
|
||||
msgstr "Soportes generados"
|
||||
|
||||
msgid "Gizmo-Place on Face"
|
||||
msgstr "Herramienta de selección de faceta como base"
|
||||
@@ -215,7 +215,7 @@ msgid ""
|
||||
"the first %1% filaments will be available in painting tool."
|
||||
msgstr ""
|
||||
"El recuento de filamentos supera el número máximo que admite la herramienta "
|
||||
"de pintura. Sólo los primeros %1% de filamentos estarán disponibles en la "
|
||||
"de pintura. Sólo los primeros %1% filamentos estarán disponibles en la "
|
||||
"herramienta de pintura."
|
||||
|
||||
msgid "Color Painting"
|
||||
@@ -249,7 +249,7 @@ msgid "Smart fill"
|
||||
msgstr "Relleno inteligente"
|
||||
|
||||
msgid "Bucket fill"
|
||||
msgstr "Relleno de cubos"
|
||||
msgstr "Relleno con cubo"
|
||||
|
||||
msgid "Height range"
|
||||
msgstr "Rango de altura"
|
||||
@@ -258,7 +258,7 @@ msgid "Enter"
|
||||
msgstr "Enter"
|
||||
|
||||
msgid "Toggle Wireframe"
|
||||
msgstr "Alternar Malla Alámbrica"
|
||||
msgstr "Alternar malla alámbrica"
|
||||
|
||||
msgid "Remap filaments"
|
||||
msgstr "Remapear filamentos"
|
||||
@@ -389,10 +389,10 @@ msgid "Group Operations"
|
||||
msgstr "Operaciones de grupo"
|
||||
|
||||
msgid "Set Orientation"
|
||||
msgstr "Establecer Orientación"
|
||||
msgstr "Establecer orientación"
|
||||
|
||||
msgid "Set Scale"
|
||||
msgstr "Establecer Escala"
|
||||
msgstr "Establecer escala"
|
||||
|
||||
msgid "Reset Position"
|
||||
msgstr "Reiniciar posición"
|
||||
@@ -407,7 +407,7 @@ msgid "World coordinates"
|
||||
msgstr "Coordenadas globales"
|
||||
|
||||
msgid "Translate(Relative)"
|
||||
msgstr "Traslación (Relativo)"
|
||||
msgstr "Traslación (relativo)"
|
||||
|
||||
msgid "Reset current rotation to the value when open the rotation tool."
|
||||
msgstr ""
|
||||
@@ -506,13 +506,13 @@ msgid "Flap Angle"
|
||||
msgstr "Ángulo de solapa"
|
||||
|
||||
msgid "Groove Angle"
|
||||
msgstr "Ángulo de Ranura"
|
||||
msgstr "Ángulo del surco"
|
||||
|
||||
msgid "Cut position"
|
||||
msgstr "Posición de corte"
|
||||
|
||||
msgid "Build Volume"
|
||||
msgstr "Volumen de Construcción"
|
||||
msgstr "Volumen de construcción"
|
||||
|
||||
msgid "Part"
|
||||
msgstr "Pieza"
|
||||
@@ -606,7 +606,7 @@ msgid "Flip cut plane"
|
||||
msgstr "Voltear plano de corte"
|
||||
|
||||
msgid "Groove change"
|
||||
msgstr "Cambio de ranura"
|
||||
msgstr "Cambio de surco"
|
||||
|
||||
msgid "Reset"
|
||||
msgstr "Reiniciar"
|
||||
@@ -685,11 +685,11 @@ msgid "Connector"
|
||||
msgstr "Conector"
|
||||
|
||||
msgid "Cut by Plane"
|
||||
msgstr "Corte por Plano"
|
||||
msgstr "Corte por plano"
|
||||
|
||||
msgid "Non-manifold edges be caused by cut tool, do you want to fix it now?"
|
||||
msgstr ""
|
||||
"La operación de corte ha resultado en bordes no plegados, ¿Desea repararlos "
|
||||
"La operación de corte ha resultado en bordes no plegados, ¿desea repararlos "
|
||||
"ahora?"
|
||||
|
||||
msgid "Repairing model object"
|
||||
@@ -699,7 +699,7 @@ msgid "Cut by line"
|
||||
msgstr "Corte por Línea"
|
||||
|
||||
msgid "Delete connector"
|
||||
msgstr "Borrar Conector"
|
||||
msgstr "Borrar conector"
|
||||
|
||||
msgid "Mesh name"
|
||||
msgstr "Nombre de la malla"
|
||||
@@ -835,7 +835,7 @@ msgid "Text move"
|
||||
msgstr "Text desplzado"
|
||||
|
||||
msgid "Set Mirror"
|
||||
msgstr "Configurar Espejo"
|
||||
msgstr "Configurar espejo"
|
||||
|
||||
msgid "Embossed text"
|
||||
msgstr "Texto en relieve"
|
||||
@@ -1350,11 +1350,11 @@ msgstr ""
|
||||
|
||||
#. TRN: An menu option to convert the SVG into an unmodifiable model part.
|
||||
msgid "Bake"
|
||||
msgstr "Hornear"
|
||||
msgstr "Empotrar"
|
||||
|
||||
#. TRN: Tooltip for the menu item.
|
||||
msgid "Bake into model as uneditable part"
|
||||
msgstr "Hornear en el modelo como parte no editable"
|
||||
msgstr "Fijar en el modelo como parte no editable"
|
||||
|
||||
msgid "Save as"
|
||||
msgstr "Guardar como"
|
||||
@@ -1574,7 +1574,7 @@ msgid "Feature 1"
|
||||
msgstr "Característica 1"
|
||||
|
||||
msgid "Reverse rotation"
|
||||
msgstr "Revertir Rotación"
|
||||
msgstr "Revertir rotación"
|
||||
|
||||
msgid "Rotate around center:"
|
||||
msgstr "Rotar alrededor del centro:"
|
||||
@@ -1757,8 +1757,8 @@ msgid ""
|
||||
"features.\n"
|
||||
"Click Yes to install it now."
|
||||
msgstr ""
|
||||
"Orca Slicer requiere de la librería Microsoft WebView2 Runtime para la "
|
||||
"funcianolidad de ciertas características.\n"
|
||||
"Orca Slicer requiere la biblioteca Microsoft WebView2 Runtime para la "
|
||||
"funcionalidad de ciertas características.\n"
|
||||
"Haga clic en Sí para instalarlo ahora."
|
||||
|
||||
msgid "WebView2 Runtime"
|
||||
@@ -1809,7 +1809,7 @@ msgstr ""
|
||||
"perfiles de impresora no se verán afectados."
|
||||
|
||||
msgid "Rebuild"
|
||||
msgstr "Reconstruir"
|
||||
msgstr "Reconstruyendo"
|
||||
|
||||
msgid "Loading current presets"
|
||||
msgstr "Cargando los perfiles actuales"
|
||||
@@ -1851,8 +1851,7 @@ msgstr "Usuario desconectado"
|
||||
msgid "new or open project file is not allowed during the slicing process!"
|
||||
msgstr ""
|
||||
"¡crear o abrir un archivo de proyecto nuevo no está permitido durante el "
|
||||
"proceso de laminado!¡crear o abrir un archivo de proyecto nuevo no está "
|
||||
"permitido durante el proceso de laminado!"
|
||||
"proceso de laminado!"
|
||||
|
||||
msgid "Open Project"
|
||||
msgstr "Abrir proyecto"
|
||||
@@ -1972,13 +1971,13 @@ msgstr ""
|
||||
"Configuración."
|
||||
|
||||
msgid "Import File"
|
||||
msgstr "Importar Archivo"
|
||||
msgstr "Importar archivo"
|
||||
|
||||
msgid "Choose files"
|
||||
msgstr "Elija los archivos"
|
||||
|
||||
msgid "New Folder"
|
||||
msgstr "Nueva Carpeta"
|
||||
msgstr "Nueva carpeta"
|
||||
|
||||
msgid "Open"
|
||||
msgstr "Abrir"
|
||||
@@ -2015,19 +2014,19 @@ msgid "Strength"
|
||||
msgstr "Fuerza"
|
||||
|
||||
msgid "Top Solid Layers"
|
||||
msgstr "Capas Sólidas Superiores"
|
||||
msgstr "Capas sólidas superiores"
|
||||
|
||||
msgid "Top Minimum Shell Thickness"
|
||||
msgstr "Espesor Mínimo de la Cubierta Superior"
|
||||
msgstr "Espesor mínimo de la cubierta superior"
|
||||
|
||||
msgid "Top Surface Density"
|
||||
msgstr "Densidad de superficie superior"
|
||||
|
||||
msgid "Bottom Solid Layers"
|
||||
msgstr "Capas Sólidas Inferiores"
|
||||
msgstr "Capas sólidas inferiores"
|
||||
|
||||
msgid "Bottom Minimum Shell Thickness"
|
||||
msgstr "Espesor Mínimo de la Cubierta Inferior"
|
||||
msgstr "Espesor mínimo de la cubierta inferior"
|
||||
|
||||
msgid "Bottom Surface Density"
|
||||
msgstr "Densidad de superficie inferior"
|
||||
@@ -2036,13 +2035,13 @@ msgid "Ironing"
|
||||
msgstr "Alisado"
|
||||
|
||||
msgid "Fuzzy Skin"
|
||||
msgstr "Superficie Rugosa"
|
||||
msgstr "Superficie rugosa"
|
||||
|
||||
msgid "Extruders"
|
||||
msgstr "Extrusores"
|
||||
|
||||
msgid "Extrusion Width"
|
||||
msgstr "Ancho de Extrusión"
|
||||
msgstr "Ancho de extrusión"
|
||||
|
||||
msgid "Wipe options"
|
||||
msgstr "Opciones de limpieza"
|
||||
@@ -2123,7 +2122,7 @@ msgid "Orca Cube"
|
||||
msgstr "Cubo Orca"
|
||||
|
||||
msgid "Orca Tolerance Test"
|
||||
msgstr "Test de Tolerancia Orca"
|
||||
msgstr "Test de tolerancia Orca"
|
||||
|
||||
msgid "3DBenchy"
|
||||
msgstr "3DBenchy"
|
||||
@@ -2141,7 +2140,7 @@ msgid "Stanford Bunny"
|
||||
msgstr "Conejito Stanford"
|
||||
|
||||
msgid "Orca String Hell"
|
||||
msgstr "Test de hilos de Orca \" String Hell\""
|
||||
msgstr "Test de hilos de Orca «String Hell»"
|
||||
|
||||
msgid ""
|
||||
"This model features text embossment on the top surface. For optimal results, "
|
||||
@@ -2151,9 +2150,9 @@ msgid ""
|
||||
"No - Do not change these settings for me"
|
||||
msgstr ""
|
||||
"Este modelo contiene texto en relieve en la superficie superior. Para "
|
||||
"obtener resultados óptimos, es aconsejable establecer el \"Umbral de "
|
||||
"perímetro (min_width_top_surface)\" a 0 para que \"Sólo un perímetro en las "
|
||||
"superficies superiores\" funcione mejor.\n"
|
||||
"obtener resultados óptimos, es aconsejable establecer el «Umbral de "
|
||||
"perímetro (min_width_top_surface)» a 0 para que «Sólo un perímetro en las "
|
||||
"superficies superiores» funcione mejor.\n"
|
||||
"Sí - Cambiar estos ajustes automáticamente \n"
|
||||
"No - No cambiar estos ajustes"
|
||||
|
||||
@@ -2164,7 +2163,7 @@ msgid "Text"
|
||||
msgstr "Texto"
|
||||
|
||||
msgid "Height range Modifier"
|
||||
msgstr "Modificador de rango de Altura"
|
||||
msgstr "Modificador de rango de altura"
|
||||
|
||||
msgid "Add settings"
|
||||
msgstr "Añadir ajustes"
|
||||
@@ -2435,7 +2434,7 @@ msgid "Clone"
|
||||
msgstr "Clonar"
|
||||
|
||||
msgid "Simplify Model"
|
||||
msgstr "Simplificar Modelo"
|
||||
msgstr "Simplificar modelo"
|
||||
|
||||
msgid "Subdivision mesh"
|
||||
msgstr "Subdivisión de malla"
|
||||
@@ -2450,7 +2449,7 @@ msgid "Drop"
|
||||
msgstr "Soltar"
|
||||
|
||||
msgid "Edit Process Settings"
|
||||
msgstr "Editar Ajustes de Proceso"
|
||||
msgstr "Editar ajustes de proceso"
|
||||
|
||||
msgid "Copy Process Settings"
|
||||
msgstr "Copiar configuración del proceso"
|
||||
@@ -2462,7 +2461,7 @@ msgid "Edit print parameters for a single object"
|
||||
msgstr "Editar los parámetros de impresión de un solo objeto"
|
||||
|
||||
msgid "Change Filament"
|
||||
msgstr "Cambiar el Filamento"
|
||||
msgstr "Cambiar el filamento"
|
||||
|
||||
msgid "Set Filament for selected items"
|
||||
msgstr "Cambiar el filamento para los elementos seleccionados"
|
||||
@@ -3457,7 +3456,7 @@ msgid "License"
|
||||
msgstr "Licencia"
|
||||
|
||||
msgid "Orca Slicer is licensed under "
|
||||
msgstr "Orca Slicer está licenciada sobre "
|
||||
msgstr "Orca Slicer tiene licencia "
|
||||
|
||||
msgid "GNU Affero General Public License, version 3"
|
||||
msgstr "GNU Affero General Public License, versión 3"
|
||||
@@ -3466,7 +3465,7 @@ msgid "Orca Slicer is based on PrusaSlicer and BambuStudio"
|
||||
msgstr "Orca Slicer se basa en PrusaSlicer y BambuStudio"
|
||||
|
||||
msgid "Libraries"
|
||||
msgstr "Librerías"
|
||||
msgstr "Bibliotecas"
|
||||
|
||||
msgid ""
|
||||
"This software uses open source components whose copyright and other "
|
||||
@@ -3501,7 +3500,7 @@ msgid "Version"
|
||||
msgstr "Versión"
|
||||
|
||||
msgid "AMS Materials Setting"
|
||||
msgstr "Ajustes de Materiales AMS"
|
||||
msgstr "Ajustes de materiales AMS"
|
||||
|
||||
msgid "Confirm"
|
||||
msgstr "Confirmar"
|
||||
@@ -3530,10 +3529,10 @@ msgid "SN"
|
||||
msgstr "SN"
|
||||
|
||||
msgid "Factors of Flow Dynamics Calibration"
|
||||
msgstr "Factores de Calibración de Dinámicas de Flujo"
|
||||
msgstr "Factores de calibración de dinámicas de flujo"
|
||||
|
||||
msgid "PA Profile"
|
||||
msgstr "Perfil de Pressure advance"
|
||||
msgstr "Perfil de «Pressure advance»"
|
||||
|
||||
msgid "Factor K"
|
||||
msgstr "Factor K"
|
||||
@@ -3547,7 +3546,7 @@ msgstr ""
|
||||
|
||||
msgid "Setting Virtual slot information while printing is not supported"
|
||||
msgstr ""
|
||||
"Ajuste de información de ranura Virtual mientras la impresión no sea "
|
||||
"Ajuste de información de ranura virtual mientras la impresión no sea "
|
||||
"soportada"
|
||||
|
||||
msgid "Are you sure you want to clear the filament information?"
|
||||
@@ -4365,20 +4364,20 @@ msgstr ""
|
||||
"seam_slope_start_height debe ser menor que layer_height.\n"
|
||||
"Restableciendo a 0."
|
||||
|
||||
#, fuzzy, c-format, boost-format
|
||||
#, c-format, boost-format
|
||||
msgid ""
|
||||
"Lock depth should smaller than skin depth.\n"
|
||||
"Reset to 50% of skin depth."
|
||||
"Reset to 50%% of skin depth."
|
||||
msgstr ""
|
||||
"La profundidad del bloqueo debe ser menor que la profundidad de la piel.\n"
|
||||
"Restablecer al 50% de la profundidad de la piel."
|
||||
"Restablecer al 50%% de la profundidad de la piel."
|
||||
|
||||
msgid ""
|
||||
"Both [Extrusion] and [Combined] modes of Fuzzy Skin require the Arachne Wall "
|
||||
"Generator to be enabled."
|
||||
msgstr ""
|
||||
"Tanto el modo [Extrusión] como el modo [Combinado] de Piel Difusa requieren "
|
||||
"que el Generador de Muros Arachne esté habilitado."
|
||||
"que el Generador de paredes Arachne esté habilitado."
|
||||
|
||||
msgid ""
|
||||
"Change these settings automatically?\n"
|
||||
@@ -4388,7 +4387,7 @@ msgid ""
|
||||
msgstr ""
|
||||
"¿Cambiar estos ajustes automáticamente?\n"
|
||||
"Sí: habilitar el generador de muros Arachne\n"
|
||||
"No: deshabilitar el generador de muros Arachne y establecer el modo "
|
||||
"No: deshabilitar el generador de paredes Arachne y establecer el modo "
|
||||
"[Desplazamiento] de la piel difusa"
|
||||
|
||||
msgid ""
|
||||
@@ -4396,7 +4395,7 @@ msgid ""
|
||||
"detection by probing is disabled, top shell layers is 0, sparse infill "
|
||||
"density is 0 and timelapse type is traditional."
|
||||
msgstr ""
|
||||
"El modo espiral solo funciona cuando los bucles de pared son 1, el soporte "
|
||||
"El modo espiral solo funciona cuando los bucles de perímetro son 1, el soporte "
|
||||
"está desactivado, la detección de agrupamientos mediante sondeo está "
|
||||
"desactivada, las capas superiores de la carcasa son 0, la densidad de "
|
||||
"relleno es 0 y el tipo de lapso de tiempo es tradicional."
|
||||
@@ -4424,7 +4423,7 @@ msgid "Heatbed preheating"
|
||||
msgstr "Precalentamiento de la cama"
|
||||
|
||||
msgid "Vibration compensation"
|
||||
msgstr "Compensación de Vibraciones"
|
||||
msgstr "Compensación de vibraciones"
|
||||
|
||||
msgid "Changing filament"
|
||||
msgstr "Cambiando el filamento"
|
||||
@@ -4451,10 +4450,10 @@ msgid "Identifying build plate type"
|
||||
msgstr "Identificando el tipo de cama de impresión"
|
||||
|
||||
msgid "Calibrating Micro Lidar"
|
||||
msgstr "Calibrando Micro Lidar"
|
||||
msgstr "Calibrando micro Lidar"
|
||||
|
||||
msgid "Homing toolhead"
|
||||
msgstr "Homing del Cabezal"
|
||||
msgstr "Homing del cabezal"
|
||||
|
||||
msgid "Cleaning nozzle tip"
|
||||
msgstr "Limpiando la boquilla"
|
||||
@@ -4490,7 +4489,7 @@ msgid "Filament loading"
|
||||
msgstr "Carga de filamento"
|
||||
|
||||
msgid "Motor noise cancellation"
|
||||
msgstr "Cancelación de Ruido de Motor"
|
||||
msgstr "Cancelación de ruido del motor"
|
||||
|
||||
msgid "Pause (AMS offline)"
|
||||
msgstr "Pausa (AMS sin conexión)"
|
||||
@@ -7363,7 +7362,7 @@ msgid "Hardened Steel"
|
||||
msgstr "Acero endurecido"
|
||||
|
||||
msgid "Stainless Steel"
|
||||
msgstr "Acero Inoxidable"
|
||||
msgstr "Acero inoxidable"
|
||||
|
||||
msgid "Tungsten Carbide"
|
||||
msgstr "Carburo de tungsteno"
|
||||
@@ -15122,13 +15121,12 @@ msgstr ""
|
||||
msgid "First layer height"
|
||||
msgstr "Altura de la primera capa"
|
||||
|
||||
#, fuzzy
|
||||
msgid ""
|
||||
"Height of the first layer. Making the first layer height thicker can improve "
|
||||
"build plate adhesion."
|
||||
msgstr ""
|
||||
"Altura de la primera capa. Hacer que la altura de la primera capa sea "
|
||||
"ligeramente gruesa puede mejorar la adherencia con la cama de impresión."
|
||||
"ligeramente más gruesa puede mejorar la adherencia con la cama de impresión."
|
||||
|
||||
msgid "Speed of the first layer except the solid infill part."
|
||||
msgstr "Velocidad de la primera capa excepto la parte sólida de relleno."
|
||||
@@ -16078,12 +16076,11 @@ msgstr "Todas las superficies superiores"
|
||||
msgid "Topmost surface"
|
||||
msgstr "Sólo la superficie superior"
|
||||
|
||||
#, fuzzy
|
||||
msgid "All solid layers"
|
||||
msgstr "Todas la capas sólidas"
|
||||
msgstr "Todas las capas sólidas"
|
||||
|
||||
msgid "Ironing Pattern"
|
||||
msgstr "Patrón de Alisado"
|
||||
msgstr "Patrón de alisado"
|
||||
|
||||
msgid "The pattern that will be used when ironing."
|
||||
msgstr "Patrón que se usará durante el alisado."
|
||||
@@ -17339,13 +17336,12 @@ msgstr ""
|
||||
msgid "Minimum sparse infill threshold"
|
||||
msgstr "Umbral de área mínima de relleno de baja densidad"
|
||||
|
||||
#, fuzzy
|
||||
msgid ""
|
||||
"Sparse infill areas smaller than this threshold value are replaced by "
|
||||
"internal solid infill."
|
||||
msgstr ""
|
||||
"El área de relleno de baja densidad que es menor que este valor de umbral se "
|
||||
"sustituye por un relleno sólido interno."
|
||||
"Las áreas de relleno de baja densidad con un tamaño por debajo de este umbral se "
|
||||
"sustituyen por un relleno sólido interno."
|
||||
|
||||
msgid "Solid infill"
|
||||
msgstr "Relleno sólido interno"
|
||||
@@ -17357,7 +17353,7 @@ msgid ""
|
||||
"Line width of internal solid infill. If expressed as a %, it will be "
|
||||
"computed over the nozzle diameter."
|
||||
msgstr ""
|
||||
"Ancho de línea del relleno sólido interno. Si se expresa cómo %, se "
|
||||
"Ancho de línea del relleno sólido interno. Si se expresa como %, se "
|
||||
"calculará en base al diámetro de la boquilla."
|
||||
|
||||
msgid "Speed of internal solid infill, not the top and bottom surface."
|
||||
@@ -17370,23 +17366,23 @@ msgid ""
|
||||
"model into a single walled print with solid bottom layers. The final "
|
||||
"generated model has no seam."
|
||||
msgstr ""
|
||||
"El modo espiral suaviza los movimientos z del contorno exterior. Convierte "
|
||||
"El modo espiral suaviza los movimientos Z del contorno exterior. Convierte "
|
||||
"un modelo sólido en una impresión de un solo perímetro con capas inferiores "
|
||||
"sólidas. El modelo final generado no tiene costuras."
|
||||
|
||||
msgid "Smooth Spiral"
|
||||
msgstr "Espiral Suave"
|
||||
msgstr "Espiral suave"
|
||||
|
||||
msgid ""
|
||||
"Smooth Spiral smooths out X and Y moves as well, resulting in no visible "
|
||||
"seam at all, even in the XY directions on walls that are not vertical."
|
||||
msgstr ""
|
||||
"Espiral Suave suaviza también los movimientos en X e Y, con lo que no se "
|
||||
"Espiral suave suaviza también los movimientos en X e Y, con lo que no se "
|
||||
"aprecia ninguna costura, ni siquiera en las direcciones XY en perímetros que "
|
||||
"no son verticales."
|
||||
|
||||
msgid "Max XY Smoothing"
|
||||
msgstr "Suavizado XY Máximo"
|
||||
msgstr "Suavizado XY máximo"
|
||||
|
||||
#, no-c-format, no-boost-format
|
||||
msgid ""
|
||||
@@ -18812,9 +18808,8 @@ msgstr ""
|
||||
"propia característica. Se expresa en porcentaje en base al diámetro de la "
|
||||
"boquilla."
|
||||
|
||||
#, fuzzy
|
||||
msgid "Detect narrow internal solid infills"
|
||||
msgstr "Detección de relleno interno estrecho"
|
||||
msgstr "Detectar relleno sólido interno estrecho"
|
||||
|
||||
msgid ""
|
||||
"This option will auto-detect narrow internal solid infill areas. If enabled, "
|
||||
@@ -21105,19 +21100,19 @@ msgstr ""
|
||||
"boquilla."
|
||||
|
||||
msgid "Printer Created Successfully"
|
||||
msgstr "Éxito Creando la Impresora"
|
||||
msgstr "Impresora creada con éxito"
|
||||
|
||||
msgid "Filament Created Successfully"
|
||||
msgstr "Éxito Creando el Filamento"
|
||||
msgstr "Filamento creado con éxito"
|
||||
|
||||
msgid "Printer Created"
|
||||
msgstr "Impresora Creada"
|
||||
msgstr "Impresora creada"
|
||||
|
||||
msgid "Please go to printer settings to edit your presets"
|
||||
msgstr "Vaya a la configuración de la impresora para editar los perfiles"
|
||||
|
||||
msgid "Filament Created"
|
||||
msgstr "Filamento Creado"
|
||||
msgstr "Filamento creado"
|
||||
|
||||
msgid ""
|
||||
"Please go to filament setting to edit your presets if you need.\n"
|
||||
@@ -21148,7 +21143,7 @@ msgstr ""
|
||||
"sincronización."
|
||||
|
||||
msgid "Printer Setting"
|
||||
msgstr "Ajustes de Impresora"
|
||||
msgstr "Ajustes de impresora"
|
||||
|
||||
msgid "Printer config bundle(.orca_printer)"
|
||||
msgstr "Paquete de configuración de impresora(.orca_printer)"
|
||||
@@ -21157,13 +21152,13 @@ msgid "Filament bundle(.orca_filament)"
|
||||
msgstr "Paquete de filamento(.orca_filament)"
|
||||
|
||||
msgid "Printer presets(.zip)"
|
||||
msgstr "Perfiles de Impresora(.zip)"
|
||||
msgstr "Perfiles de impresora(.zip)"
|
||||
|
||||
msgid "Filament presets(.zip)"
|
||||
msgstr "Perfiles de Filamento(.zip)"
|
||||
msgstr "Perfiles de filamento(.zip)"
|
||||
|
||||
msgid "Process presets(.zip)"
|
||||
msgstr "Perfiles de Proceso(.zip)"
|
||||
msgstr "Perfiles de proceso(.zip)"
|
||||
|
||||
msgid "initialize fail"
|
||||
msgstr "fallo inicializando"
|
||||
@@ -21271,7 +21266,7 @@ msgstr ""
|
||||
"operación de exportado de configuración."
|
||||
|
||||
msgid "Edit Filament"
|
||||
msgstr "Editar Filamento"
|
||||
msgstr "Editar filamento"
|
||||
|
||||
msgid "Filament presets under this filament"
|
||||
msgstr "Perfiles de filamento basados en este filamento"
|
||||
@@ -21292,7 +21287,7 @@ msgstr[0] "El siguiente perfil hereda de este perfil."
|
||||
msgstr[1] "Los siguientes perfiles heredan de este perfil."
|
||||
|
||||
msgid "Delete Preset"
|
||||
msgstr "Borrar Perfil"
|
||||
msgstr "Borrar perfil"
|
||||
|
||||
msgid "Are you sure to delete the selected preset?"
|
||||
msgstr "¿Está seguro de borrar el perfil seleccionado?"
|
||||
@@ -21301,7 +21296,7 @@ msgid "Delete preset"
|
||||
msgstr "Borrar perfil"
|
||||
|
||||
msgid "+ Add Preset"
|
||||
msgstr "+ Añadir Perfil"
|
||||
msgstr "+ Añadir perfil"
|
||||
|
||||
msgid ""
|
||||
"All the filament presets belong to this filament would be deleted.\n"
|
||||
@@ -21329,10 +21324,10 @@ msgid "The filament choice not find filament preset, please reselect it"
|
||||
msgstr "Perfil de filamento no encontrado, por favor, seleccione otro"
|
||||
|
||||
msgid "[Delete Required]"
|
||||
msgstr "[Necesario Eliminar]"
|
||||
msgstr "[Necesario eliminar]"
|
||||
|
||||
msgid "Edit Preset"
|
||||
msgstr "Editar Perfil"
|
||||
msgstr "Editar perfil"
|
||||
|
||||
msgid "For more information, please check out Wiki"
|
||||
msgstr "Para más información, consulte la Wiki"
|
||||
@@ -21344,7 +21339,7 @@ msgid "Collapse"
|
||||
msgstr "Colapsar"
|
||||
|
||||
msgid "Daily Tips"
|
||||
msgstr "Consejos Diarios"
|
||||
msgstr "Consejos diarios"
|
||||
|
||||
msgid ""
|
||||
"The printer nozzle information has not been set.\n"
|
||||
@@ -21455,7 +21450,7 @@ msgid "Physical Printer"
|
||||
msgstr "Impresora física"
|
||||
|
||||
msgid "Print Host upload"
|
||||
msgstr "Carga al Host de Impresión"
|
||||
msgstr "Mandar al servidor de impresión"
|
||||
|
||||
msgid ""
|
||||
"Select the network agent implementation for printer communication. Available "
|
||||
@@ -21507,8 +21502,8 @@ msgid ""
|
||||
"To use a custom CA file, please import your CA file into Certificate Store / "
|
||||
"Keychain."
|
||||
msgstr ""
|
||||
"Para utilizar un archivo de CA personalizado, importe su archivo de CA a "
|
||||
"Almacén de certificados / Llavero."
|
||||
"Para utilizar un archivo de CA personalizado, importe su archivo de CA en el "
|
||||
"Almacén de certificados/Llavero."
|
||||
|
||||
msgid "Login/Test"
|
||||
msgstr "Inicio de sesión/Prueba"
|
||||
@@ -21529,7 +21524,7 @@ msgid "Could not connect to AstroBox"
|
||||
msgstr "No se ha podido conectar con AstroBox"
|
||||
|
||||
msgid "Note: AstroBox version 1.1.0 or higher is required."
|
||||
msgstr "Nota: Se requiere la versión 1.1.0 de AstroBox como mínimo."
|
||||
msgstr "Nota: Se requiere la versión de AstroBox 1.1.0 o superior."
|
||||
|
||||
msgid "Connection to Duet is working correctly."
|
||||
msgstr "La conexión con Duet funciona correctamente."
|
||||
@@ -21576,10 +21571,10 @@ msgid "Could not connect to OctoPrint"
|
||||
msgstr "No se ha podido conectar con OctoPrint"
|
||||
|
||||
msgid "Note: OctoPrint version 1.1.0 or higher is required."
|
||||
msgstr "Nota: Se requiere una versión de OctoPrint al menos 1.1.0."
|
||||
msgstr "Nota: Se requiere la versión de OctoPrint 1.1.0 o superior."
|
||||
|
||||
msgid "Connection to Prusa SL1 / SL1S is working correctly."
|
||||
msgstr "La conexión a Prusa SL1 / SL1S funciona correctamente."
|
||||
msgstr "La conexión a Prusa SL1/SL1S funciona correctamente."
|
||||
|
||||
msgid "Could not connect to Prusa SLA"
|
||||
msgstr "No se ha podido conectar con Prusa SLA"
|
||||
@@ -21939,7 +21934,7 @@ msgstr ""
|
||||
"Al imprimir este filamento, existe un riesgo de deformación y baja "
|
||||
"resistencia de adherencia de capas. Para obtener mejores resultados, "
|
||||
"consulte esta wiki: Consejos de impresión para materiales de alta "
|
||||
"temperatura / Ingeniería."
|
||||
"temperatura/ingeniería."
|
||||
|
||||
msgid ""
|
||||
"When printing this filament, there's a risk of nozzle clogging, oozing, "
|
||||
@@ -21949,7 +21944,7 @@ msgstr ""
|
||||
"Al imprimir este filamento, existe un riesgo de obstrucción de la boquilla, "
|
||||
"goteo, deformación y baja resistencia de adherencia de capas. Para obtener "
|
||||
"mejores resultados, consulte esta wiki: Consejos de impresión para "
|
||||
"materiales de alta temperatura / Ingeniería."
|
||||
"materiales de alta temperatura/ingeniería."
|
||||
|
||||
msgid ""
|
||||
"To get better transparent or translucent results with the corresponding "
|
||||
@@ -22010,7 +22005,7 @@ msgid ""
|
||||
"55D) and is compatible with the AMS. To get better printing quality, please "
|
||||
"refer to this wiki: TPU printing guide."
|
||||
msgstr ""
|
||||
"Si va a imprimir un tipo de TPU blando, no lama con este perfil, y es solo "
|
||||
"Si va a imprimir un tipo de TPU blando, no lamine con este perfil, y es solo "
|
||||
"para TPU que tiene suficiente dureza (no menos de 55D) y es compatible con "
|
||||
"el AMS. Para obtener una mejor calidad de impresión, consulte esta wiki: "
|
||||
"Guía de impresión TPU."
|
||||
@@ -22133,7 +22128,7 @@ msgid "Bed Leveling"
|
||||
msgstr "Nivelación de la cama"
|
||||
|
||||
msgid "Flow Dynamic Calibration"
|
||||
msgstr "Calibración Dinámica de Flujo"
|
||||
msgstr "Calibración dinámica de flujo"
|
||||
|
||||
msgid "Send Options"
|
||||
msgstr "Opciones de envío"
|
||||
@@ -22145,7 +22140,7 @@ msgid ""
|
||||
"printers at the same time. (It depends on how many devices can undergo "
|
||||
"heating at the same time.)"
|
||||
msgstr ""
|
||||
"impresoras al mismo tiempo.(Depende de cuántos aparatos puedan calentarse al "
|
||||
"impresoras al mismo tiempo (depende de cuántos aparatos puedan calentarse al "
|
||||
"mismo tiempo)."
|
||||
|
||||
msgid "Wait"
|
||||
@@ -22169,7 +22164,7 @@ msgstr "Seleccionar impresoras conectadas (0/6)"
|
||||
|
||||
#, c-format, boost-format
|
||||
msgid "Select Connected Printers (%d/6)"
|
||||
msgstr "Seleccionar Impresoras Conectadas (%d/6)"
|
||||
msgstr "Seleccionar impresoras conectadas (%d/6)"
|
||||
|
||||
#, c-format, boost-format
|
||||
msgid "The maximum number of printers that can be selected is %d"
|
||||
@@ -22179,7 +22174,7 @@ msgid "No task"
|
||||
msgstr "Sin tareas"
|
||||
|
||||
msgid "Edit Printers"
|
||||
msgstr "Editar Impresoras"
|
||||
msgstr "Editar impresoras"
|
||||
|
||||
msgid "Task Name"
|
||||
msgstr "Nombre de la tarea"
|
||||
@@ -22206,13 +22201,13 @@ msgid "Syncing"
|
||||
msgstr "Sincronizando"
|
||||
|
||||
msgid "Printing Finish"
|
||||
msgstr "Impresión Finalizada"
|
||||
msgstr "Impresión finalizada"
|
||||
|
||||
msgid "Printing Failed"
|
||||
msgstr "Impresión fallida"
|
||||
|
||||
msgid "Printing Pause"
|
||||
msgstr "Impresión Pausada"
|
||||
msgstr "Impresión pausada"
|
||||
|
||||
msgid "Pending"
|
||||
msgstr "Pendiente"
|
||||
@@ -22221,19 +22216,19 @@ msgid "Sending"
|
||||
msgstr "Enviando"
|
||||
|
||||
msgid "Sending Finish"
|
||||
msgstr "Envío Finalizado"
|
||||
msgstr "Envío finalizado"
|
||||
|
||||
msgid "Sending Cancel"
|
||||
msgstr "Envío Cancelado"
|
||||
msgstr "Envío cancelado"
|
||||
|
||||
msgid "Sending Failed"
|
||||
msgstr "Envío Fallido"
|
||||
msgstr "Envío fallido"
|
||||
|
||||
msgid "Print Success"
|
||||
msgstr "Impresión Exitosa"
|
||||
msgstr "Impresión exitosa"
|
||||
|
||||
msgid "Print Failed"
|
||||
msgstr "Error de Impresión"
|
||||
msgstr "Error de impresión"
|
||||
|
||||
msgid "Removed"
|
||||
msgstr "Eliminado"
|
||||
@@ -22380,7 +22375,7 @@ msgid "Set the brim type of this object to \"painted\""
|
||||
msgstr "Establecer el tipo de borde de este objeto a \"pintado\""
|
||||
|
||||
msgid " invalid brim ears"
|
||||
msgstr " orejas de borde invalidos"
|
||||
msgstr " orejas de borde inválidas"
|
||||
|
||||
msgid "Brim Ears"
|
||||
msgstr "Orejas de borde"
|
||||
@@ -22676,7 +22671,7 @@ msgid ""
|
||||
"Did you know that <b>Reverse on odd</b> feature can significantly improve "
|
||||
"the surface quality of your overhangs?"
|
||||
msgstr ""
|
||||
"Invertir en impar \n"
|
||||
"Invertir en impar\n"
|
||||
"¿Sabías que la función <b>Invertir en impar</b> puede mejorar "
|
||||
"significativamente la calidad de la superficie de los voladizos?"
|
||||
|
||||
@@ -22696,7 +22691,7 @@ msgid ""
|
||||
"Did you know that you can fix a corrupted 3D model to avoid a lot of slicing "
|
||||
"problems on the Windows system?"
|
||||
msgstr ""
|
||||
"Arreglar modelo \n"
|
||||
"Arreglar modelo\n"
|
||||
"¿Sabías que puedes arreglar un modelo 3D dañado para evitar muchos problemas "
|
||||
"de laminado en el sistema Windows?"
|
||||
|
||||
@@ -22754,7 +22749,7 @@ msgid ""
|
||||
"Did you know that you use the Search tool to quickly find a specific Orca "
|
||||
"Slicer setting?"
|
||||
msgstr ""
|
||||
"Funcionalidad de búsqueda \n"
|
||||
"Funcionalidad de búsqueda\n"
|
||||
"¿Sabía que puede utilizar la herramienta de búsqueda para encontrar "
|
||||
"rápidamente un ajuste específico de Orca Slicer?"
|
||||
|
||||
@@ -22764,7 +22759,7 @@ msgid ""
|
||||
"Did you know that you can reduce the number of triangles in a mesh using the "
|
||||
"Simplify mesh feature? Right-click the model and select Simplify model."
|
||||
msgstr ""
|
||||
"Simplificar modelo \n"
|
||||
"Simplificar modelo\n"
|
||||
"¿Sabía que puede reducir el número de triángulos de una malla utilizando la "
|
||||
"función Simplificar malla? Haga clic con el botón derecho del ratón en el "
|
||||
"modelo y seleccione Simplificar modelo."
|
||||
@@ -22785,7 +22780,7 @@ msgid ""
|
||||
"Did you know that you can split a big object into small ones for easy "
|
||||
"colorizing or printing?"
|
||||
msgstr ""
|
||||
"Dividir en Objetos/Partes\n"
|
||||
"Dividir en objetos/partes\n"
|
||||
"¿Sabías que puedes dividir un objeto grande en pequeños para colorearlo o "
|
||||
"imprimirlo fácilmente?"
|
||||
|
||||
@@ -22796,7 +22791,7 @@ msgid ""
|
||||
"part modifier? That way you can, for example, create easily resizable holes "
|
||||
"directly in Orca Slicer."
|
||||
msgstr ""
|
||||
"Sustraer una parte \n"
|
||||
"Sustraer una parte\n"
|
||||
"¿Sabías que puedes sustraer una malla de otra utilizando el modificador "
|
||||
"Parte negativa? De esta forma puedes, por ejemplo, crear agujeros fácilmente "
|
||||
"redimensionables directamente en Orca Slicer."
|
||||
@@ -22825,7 +22820,7 @@ msgstr ""
|
||||
"Ubicación de la costura Z\n"
|
||||
"¿Sabías que puedes personalizar la ubicación de la costura Z, e incluso "
|
||||
"pintarla en tu impresión, para tenerla en un lugar menos visible? Esto "
|
||||
"mejora el aspecto general de tu modelo. ¡Compruébalo!"
|
||||
"mejora el aspecto general de tu modelo. ¡Pruébalo!"
|
||||
|
||||
#: resources/data/hints.ini: [hint:Fine-tuning for flow rate]
|
||||
msgid ""
|
||||
@@ -22858,9 +22853,9 @@ msgid ""
|
||||
"Did you know that you can print a model even faster, by using the Adaptive "
|
||||
"Layer Height option? Check it out!"
|
||||
msgstr ""
|
||||
"Acelere su impresión con la Altura Adaptable de Capa\n"
|
||||
"Acelera tu impresión con la altura adaptable de capa\n"
|
||||
"¿Sabías que puedes imprimir un modelo aún más rápido utilizando la opción "
|
||||
"Altura Adaptable de Capa? ¡Compruébalo!"
|
||||
"Altura adaptable de capa? ¡Pruébalo!"
|
||||
|
||||
#: resources/data/hints.ini: [hint:Support painting]
|
||||
msgid ""
|
||||
@@ -22870,7 +22865,7 @@ msgid ""
|
||||
"model that actually need it."
|
||||
msgstr ""
|
||||
"Pintura de soportes\n"
|
||||
"¿Sabías que puedes pintar los soportes en cualquier ubicación? Esta función "
|
||||
"¿Sabías que puedes pintar la ubicación de tus soportes? Esta función "
|
||||
"facilita la colocación de soportes sólo en las secciones donde realmente sea "
|
||||
"necesario."
|
||||
|
||||
@@ -22884,7 +22879,7 @@ msgstr ""
|
||||
"Diferentes tipos de soportes\n"
|
||||
"¿Sabías que puedes elegir entre varios tipos de soportes? Los soportes en "
|
||||
"forma de árbol son ideales para modelos orgánicos, ahorran filamento y "
|
||||
"mejoran la velocidad de impresión. ¡Compruébalo!"
|
||||
"mejoran la velocidad de impresión. ¡Pruébalo!"
|
||||
|
||||
#: resources/data/hints.ini: [hint:Printing Silk Filament]
|
||||
msgid ""
|
||||
@@ -22955,9 +22950,9 @@ msgid ""
|
||||
"extruder/hotend clogging when printing lower temperature filament with a "
|
||||
"higher enclosure temperature? More info about this in the Wiki."
|
||||
msgstr ""
|
||||
"¿Cuando es necesario imprimir con la puerta de la impresora abierta?\n"
|
||||
"¿Cuándo es necesario imprimir con la puerta de la impresora abierta?\n"
|
||||
"¿Sabías que la apertura de la puerta de la impresora puede reducir la "
|
||||
"probabilidad de obstrucción del extrusor / cabezal al imprimir filamento de "
|
||||
"probabilidad de obstrucción del extrusor/cabezal al imprimir filamento de "
|
||||
"baja temperatura con una temperatura más alta de la cubierta? Más "
|
||||
"información sobre esto en la Wiki."
|
||||
|
||||
@@ -22968,7 +22963,7 @@ msgid ""
|
||||
"ABS, appropriately increasing the heatbed temperature can reduce the "
|
||||
"probability of warping?"
|
||||
msgstr ""
|
||||
"Evite la deformación\n"
|
||||
"Evita la deformación\n"
|
||||
"¿Sabías que al imprimir materiales propensos a la deformación como el ABS, "
|
||||
"aumentar adecuadamente la temperatura de la cama térmica puede reducir la "
|
||||
"probabilidad de deformaciones?"
|
||||
@@ -23974,7 +23969,6 @@ msgstr ""
|
||||
#~ "Espaciado de las líneas de interfaz. Cero significa que la interfaz es "
|
||||
#~ "sólida"
|
||||
|
||||
#, fuzzy
|
||||
#~ msgid ""
|
||||
#~ "Minimum thickness of thin features. Model features that are thinner than "
|
||||
#~ "this value will not be printed, while features thicker than this value "
|
||||
|
||||
@@ -67,6 +67,10 @@
|
||||
{
|
||||
"name": "Anycubic i3 Mega S",
|
||||
"sub_path": "machine/Anycubic i3 Mega S.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic Kobra Neo",
|
||||
"sub_path": "machine/Anycubic Kobra Neo.json"
|
||||
}
|
||||
],
|
||||
"process_list": [
|
||||
@@ -253,6 +257,22 @@
|
||||
{
|
||||
"name": "0.40mm Standard @Anycubic Kobra 3 0.8 nozzle",
|
||||
"sub_path": "process/0.40mm Standard @Anycubic Kobra 3 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.12mm Detail @Anycubic Kobra Neo 0.4 nozzle",
|
||||
"sub_path": "process/0.12mm Detail @Anycubic Kobra Neo 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle",
|
||||
"sub_path": "process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle",
|
||||
"sub_path": "process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle",
|
||||
"sub_path": "process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
|
||||
}
|
||||
],
|
||||
"filament_list": [
|
||||
@@ -435,6 +455,10 @@
|
||||
{
|
||||
"name": "Generic TPU @Anycubic Kobra 3 0.4 nozzle",
|
||||
"sub_path": "filament/Generic TPU @Anycubic Kobra 3 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic PLA @Anycubic Kobra Neo 0.4 nozzle",
|
||||
"sub_path": "filament/Anycubic PLA @Anycubic Kobra Neo 0.4 nozzle.json"
|
||||
}
|
||||
],
|
||||
"machine_list": [
|
||||
@@ -517,6 +541,10 @@
|
||||
{
|
||||
"name": "Anycubic i3 Mega S 0.4 nozzle",
|
||||
"sub_path": "machine/Anycubic i3 Mega S 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Anycubic Kobra Neo 0.4 nozzle",
|
||||
"sub_path": "machine/Anycubic Kobra Neo 0.4 nozzle.json"
|
||||
}
|
||||
]
|
||||
}
|
||||
}
|
||||
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 133 KiB After Width: | Height: | Size: 38 KiB |
+261
@@ -0,0 +1,261 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Anycubic PLA @Anycubic Kobra Neo 0.4 nozzle",
|
||||
"inherits": "Anycubic Generic PLA",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA04_kobra_neo",
|
||||
"filament_id": "GFL99",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Anycubic"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"Anycubic PLA @Anycubic Kobra 2 Neo 0.4 nozzle"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra Neo 0.4 nozzle"
|
||||
],
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"activate_chamber_temp_control": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"bed_type": [
|
||||
"Cool Plate"
|
||||
],
|
||||
"chamber_temperature": [
|
||||
"0"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"60"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"80"
|
||||
],
|
||||
"filament_cooling_final_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_initial_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_cooling_moves": [
|
||||
"0"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_load_time": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_loading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_multitool_ramming": [
|
||||
"0"
|
||||
],
|
||||
"filament_multitool_ramming_flow": [
|
||||
"10"
|
||||
],
|
||||
"filament_multitool_ramming_volume": [
|
||||
"10"
|
||||
],
|
||||
"filament_notes": [
|
||||
""
|
||||
],
|
||||
"filament_ramming_parameters": [
|
||||
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_above": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_below": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_lift_enforce": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
],
|
||||
"filament_toolchange_delay": [
|
||||
"0"
|
||||
],
|
||||
"filament_unload_time": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_unloading_speed_start": [
|
||||
"0"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"3"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.04"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"9"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"-1"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"45"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,228 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Anycubic Kobra Neo 0.4 nozzle",
|
||||
"inherits": "fdm_machine_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM005_kobra_neo",
|
||||
"instantiation": "true",
|
||||
"printer_technology": "FFF",
|
||||
"printer_settings_id": "Anycubic Kobra Neo 0.4 nozzle",
|
||||
"printer_model": "Anycubic Kobra Neo",
|
||||
"printer_variant": "0.4",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle",
|
||||
"default_filament_profile": [
|
||||
"Anycubic Generic PLA"
|
||||
],
|
||||
"disable_m73": "1",
|
||||
"gcode_flavor": "marlin2",
|
||||
"printable_area": [
|
||||
"0x0",
|
||||
"220x0",
|
||||
"220x220",
|
||||
"0x220"
|
||||
],
|
||||
"printable_height": "250",
|
||||
"thumbnails": [
|
||||
"230x110"
|
||||
],
|
||||
"thumbnails_format": "PNG",
|
||||
"adaptive_bed_mesh_margin": "0",
|
||||
"auxiliary_fan": "0",
|
||||
"bbl_use_printhost": "0",
|
||||
"bed_custom_model": "",
|
||||
"bed_custom_texture": "",
|
||||
"bed_exclude_area": [
|
||||
"0x0"
|
||||
],
|
||||
"bed_mesh_max": "0,0",
|
||||
"bed_mesh_min": "0,0",
|
||||
"bed_mesh_probe_distance": "0,0",
|
||||
"before_layer_change_gcode": "G92 E0 ; zero the extruded length again\n; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
|
||||
"best_object_pos": "0.5,0.5",
|
||||
"change_extrusion_role_gcode": "",
|
||||
"change_filament_gcode": "",
|
||||
"cooling_tube_length": "0",
|
||||
"cooling_tube_retraction": "0",
|
||||
"deretraction_speed": [
|
||||
"0"
|
||||
],
|
||||
"emit_machine_limits_to_gcode": "1",
|
||||
"enable_filament_ramming": "0",
|
||||
"enable_long_retraction_when_cut": "0",
|
||||
"extra_loading_move": "0",
|
||||
"extruder_clearance_height_to_lid": "20",
|
||||
"extruder_clearance_height_to_rod": "20",
|
||||
"extruder_clearance_radius": "20",
|
||||
"extruder_colour": [
|
||||
"#FF4D4F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"head_wrap_detect_zone": [],
|
||||
"high_current_on_filament_swap": "0",
|
||||
"host_type": "octoprint",
|
||||
"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
|
||||
"long_retractions_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"machine_end_gcode": "M140 S0 ; heatbed off\nM107 ; fan off\nG91 ; relative positioning\nM83 ; extruder relative mode\nG1 E-3 F3000 ; retract\nG1 Z+0.5 F3000 ; lift nozzle\nM104 S0 ; extruder off\nG28 X Y ; home X/Y\nG90 ; absolute positioning\nG1 Y220 F3000\nM84 ; steppers off\nM300 S1318 P266",
|
||||
"machine_load_filament_time": "42",
|
||||
"machine_max_acceleration_e": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"20000",
|
||||
"20000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"2000",
|
||||
"2000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"800",
|
||||
"800"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"5",
|
||||
"5"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"100",
|
||||
"100"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"300"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"machine_min_extruding_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_min_travel_rate": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_pause_gcode": "M601",
|
||||
"machine_start_gcode": "G21 ; metric values\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S[first_layer_temperature] ; set extruder temp\nM140 S[first_layer_bed_temperature] ; set bed temp\nG28 ; home all axes\nG29 ; auto bed leveling\nM300 S1318 P266\nG1 Z5 F5000 ; lift nozzle\nG1 X0 Y0 F3000\nG1 Z0.3 ; lower nozzle\nG92 E0 ; zero extruded length\nG1 X10 Y5 F1800 ; move to purge line start\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S[first_layer_temperature] ; wait for extruder temp\nG1 X60 Y5 E20 F500 ; purge line\nG92 E0 ; zero extruded length\nG1 E-4.5 F4000 ; retract\nG92 E0 ; zero extruded length\nG1 X120 F4000 ; wipe\nM117 Printing...",
|
||||
"machine_unload_filament_time": "0",
|
||||
"manual_filament_change": "0",
|
||||
"max_layer_height": [
|
||||
"0.28"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08"
|
||||
],
|
||||
"nozzle_height": "4",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "brass",
|
||||
"nozzle_volume": "0",
|
||||
"parking_pos_retraction": "0",
|
||||
"preferred_orientation": "0",
|
||||
"printer_notes": "",
|
||||
"printer_structure": "i3",
|
||||
"printhost_authorization_type": "key",
|
||||
"printhost_ssl_ignore_revoke": "0",
|
||||
"printing_by_object_gcode": "",
|
||||
"purge_in_prime_tower": "0",
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0.3"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"258"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"2.5"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"1"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"100"
|
||||
],
|
||||
"scan_first_layer": "0",
|
||||
"silent_mode": "0",
|
||||
"single_extruder_multi_material": "1",
|
||||
"support_air_filtration": "1",
|
||||
"support_chamber_temp_control": "1",
|
||||
"support_multi_bed_types": "0",
|
||||
"template_custom_gcode": "",
|
||||
"time_cost": "0",
|
||||
"time_lapse_gcode": "",
|
||||
"upward_compatible_machine": [],
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"0"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Auto Lift"
|
||||
],
|
||||
"z_offset": "0"
|
||||
}
|
||||
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Anycubic Kobra Neo",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Anycubic",
|
||||
"model_id": "Anycubic Kobra Neo",
|
||||
"nozzle_diameter": "0.4",
|
||||
"bed_model": "Anycubic Kobra Neo_buildplate_model.stl",
|
||||
"bed_texture": "Anycubic Kobra Neo_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Anycubic Generic PLA"
|
||||
}
|
||||
+292
@@ -0,0 +1,292 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Detail @Anycubic Kobra Neo 0.4 nozzle",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004_kobra_neo",
|
||||
"instantiation": "true",
|
||||
"print_settings_id": "0.12mm Detail @Anycubic Kobra 2 Neo 0.4 nozzle",
|
||||
"layer_height": "0.12",
|
||||
"filename_format": "{input_filename_base}_{filament_type[0]}_{layer_height}_{print_time}.gcode",
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra Neo 0.4 nozzle"
|
||||
],
|
||||
"accel_to_decel_enable": "1",
|
||||
"accel_to_decel_factor": "50%",
|
||||
"adaptive_layer_height": "1",
|
||||
"alternate_extra_wall": "0",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0.6",
|
||||
"bottom_solid_infill_flow_ratio": "1",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bridge_acceleration": "50%",
|
||||
"bridge_angle": "0",
|
||||
"bridge_density": "100%",
|
||||
"bridge_flow": "0.9",
|
||||
"bridge_no_support": "1",
|
||||
"bridge_speed": "60",
|
||||
"brim_ears_detection_length": "1",
|
||||
"brim_ears_max_angle": "125",
|
||||
"brim_object_gap": "0.15",
|
||||
"brim_type": "outer_only",
|
||||
"brim_width": "5",
|
||||
"compatible_printers_condition": "",
|
||||
"counterbore_hole_bridging": "none",
|
||||
"default_acceleration": "2000",
|
||||
"default_jerk": "0",
|
||||
"detect_narrow_internal_solid_infill": "1",
|
||||
"detect_overhang_wall": "1",
|
||||
"detect_thin_wall": "0",
|
||||
"dont_filter_internal_bridges": "disabled",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"elefant_foot_compensation_layers": "1",
|
||||
"enable_arc_fitting": "0",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"enable_support": "0",
|
||||
"enforce_support_layers": "0",
|
||||
"ensure_vertical_shell_thickness": "ensure_all",
|
||||
"exclude_object": "0",
|
||||
"extra_perimeters_on_overhangs": "1",
|
||||
"filter_out_gap_fill": "0",
|
||||
"flush_into_infill": "0",
|
||||
"flush_into_objects": "0",
|
||||
"flush_into_support": "0",
|
||||
"fuzzy_skin": "none",
|
||||
"fuzzy_skin_first_layer": "0",
|
||||
"fuzzy_skin_point_distance": "0.8",
|
||||
"fuzzy_skin_thickness": "0.3",
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "100",
|
||||
"gcode_add_line_number": "0",
|
||||
"gcode_comments": "0",
|
||||
"gcode_label_objects": "1",
|
||||
"hole_to_polyhole": "0",
|
||||
"hole_to_polyhole_threshold": "0.01",
|
||||
"hole_to_polyhole_twisted": "1",
|
||||
"independent_support_layer_height": "1",
|
||||
"infill_anchor": "400",
|
||||
"infill_anchor_max": "10",
|
||||
"infill_combination": "0",
|
||||
"infill_direction": "45",
|
||||
"infill_jerk": "9",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "45",
|
||||
"initial_layer_jerk": "9",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_min_bead_width": "85%",
|
||||
"initial_layer_print_height": "0.12",
|
||||
"initial_layer_speed": "45",
|
||||
"initial_layer_travel_speed": "100%",
|
||||
"inner_wall_acceleration": "1500",
|
||||
"inner_wall_jerk": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "65",
|
||||
"interface_shells": "0",
|
||||
"internal_bridge_flow": "1",
|
||||
"internal_bridge_speed": "150%",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_pattern": "zig-zag",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"ironing_angle": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_pattern": "zig-zag",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"is_infill_first": "0",
|
||||
"line_width": "0.42",
|
||||
"make_overhang_printable": "0",
|
||||
"make_overhang_printable_angle": "55",
|
||||
"make_overhang_printable_hole_size": "0",
|
||||
"max_bridge_length": "10",
|
||||
"max_travel_detour_distance": "0",
|
||||
"max_volumetric_extrusion_rate_slope": "0",
|
||||
"max_volumetric_extrusion_rate_slope_segment_length": "5",
|
||||
"min_bead_width": "85%",
|
||||
"min_feature_size": "25%",
|
||||
"min_length_factor": "0.5",
|
||||
"min_width_top_surface": "300%",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"mmu_segmented_region_interlocking_depth": "0",
|
||||
"mmu_segmented_region_max_width": "0",
|
||||
"notes": "",
|
||||
"only_one_wall_first_layer": "0",
|
||||
"only_one_wall_top": "1",
|
||||
"ooze_prevention": "0",
|
||||
"outer_wall_acceleration": "1000",
|
||||
"outer_wall_jerk": "10",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "45",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "45",
|
||||
"overhang_3_4_speed": "28",
|
||||
"overhang_4_4_speed": "10",
|
||||
"overhang_reverse": "0",
|
||||
"overhang_reverse_internal_only": "0",
|
||||
"overhang_reverse_threshold": "50%",
|
||||
"overhang_speed_classic": "1",
|
||||
"post_process": [],
|
||||
"precise_outer_wall": "0",
|
||||
"precise_z_height": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "45",
|
||||
"prime_volume": "45",
|
||||
"print_flow_ratio": "1",
|
||||
"print_order": "default",
|
||||
"print_sequence": "by layer",
|
||||
"raft_contact_distance": "0.1",
|
||||
"raft_expansion": "1.5",
|
||||
"raft_first_layer_density": "90%",
|
||||
"raft_first_layer_expansion": "2",
|
||||
"raft_layers": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"role_based_wipe_speed": "1",
|
||||
"rotate_solid_infill_direction": "1",
|
||||
"scarf_angle_threshold": "155",
|
||||
"scarf_joint_flow_ratio": "1",
|
||||
"scarf_joint_speed": "100%",
|
||||
"scarf_overhang_threshold": "40%",
|
||||
"seam_gap": "5%",
|
||||
"seam_position": "aligned",
|
||||
"seam_slope_conditional": "0",
|
||||
"seam_slope_entire_loop": "0",
|
||||
"seam_slope_inner_walls": "0",
|
||||
"seam_slope_min_length": "20",
|
||||
"seam_slope_start_height": "0",
|
||||
"seam_slope_steps": "10",
|
||||
"seam_slope_type": "none",
|
||||
"single_extruder_multi_material_priming": "0",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "0",
|
||||
"skirt_speed": "50",
|
||||
"slice_closing_radius": "0.049",
|
||||
"slicing_mode": "regular",
|
||||
"slow_down_layers": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_area_infill_flow_compensation": "0",
|
||||
"small_area_infill_flow_compensation_model": [
|
||||
"0,0",
|
||||
"\n0.2,0.4444",
|
||||
"\n0.4,0.6145",
|
||||
"\n0.6,0.7059",
|
||||
"\n0.8,0.7619",
|
||||
"\n1.5,0.8571",
|
||||
"\n2,0.8889",
|
||||
"\n3,0.9231",
|
||||
"\n5,0.9520",
|
||||
"\n10,1"
|
||||
],
|
||||
"small_perimeter_speed": "50%",
|
||||
"small_perimeter_threshold": "0",
|
||||
"solid_infill_direction": "45",
|
||||
"solid_infill_filament": "1",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_filament": "1",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"sparse_infill_speed": "150",
|
||||
"spiral_mode": "0",
|
||||
"spiral_mode_max_xy_smoothing": "200%",
|
||||
"spiral_mode_smooth": "0",
|
||||
"staggered_inner_seams": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"support_angle": "0",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_critical_regions_only": "0",
|
||||
"support_expansion": "0",
|
||||
"support_filament": "0",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_not_for_body": "1",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.4",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_remove_small_overhang": "1",
|
||||
"support_speed": "100",
|
||||
"support_style": "default",
|
||||
"support_threshold_angle": "40",
|
||||
"support_top_z_distance": "0.1",
|
||||
"support_type": "tree(auto)",
|
||||
"thick_bridges": "0",
|
||||
"thick_internal_bridges": "1",
|
||||
"timelapse_type": "0",
|
||||
"top_bottom_infill_wall_overlap": "25%",
|
||||
"top_shell_layers": "3",
|
||||
"top_shell_thickness": "1",
|
||||
"top_solid_infill_flow_ratio": "1",
|
||||
"top_surface_acceleration": "1000",
|
||||
"top_surface_jerk": "9",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_speed": "60",
|
||||
"travel_acceleration": "2000",
|
||||
"travel_jerk": "10",
|
||||
"travel_speed": "300",
|
||||
"travel_speed_z": "0",
|
||||
"tree_support_adaptive_layer_height": "1",
|
||||
"tree_support_angle_slow": "25",
|
||||
"tree_support_auto_brim": "1",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_branch_angle_organic": "40",
|
||||
"tree_support_branch_diameter": "5",
|
||||
"tree_support_branch_diameter_angle": "5",
|
||||
"tree_support_branch_diameter_double_wall": "3",
|
||||
"tree_support_branch_diameter_organic": "2",
|
||||
"tree_support_branch_distance": "5",
|
||||
"tree_support_branch_distance_organic": "1",
|
||||
"tree_support_brim_width": "3",
|
||||
"tree_support_tip_diameter": "0.8",
|
||||
"tree_support_top_rate": "30%",
|
||||
"tree_support_wall_count": "0",
|
||||
"wall_direction": "auto",
|
||||
"wall_distribution_count": "1",
|
||||
"wall_filament": "1",
|
||||
"wall_generator": "classic",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_loops": "2",
|
||||
"wall_sequence": "outer wall/inner wall",
|
||||
"wall_transition_angle": "10",
|
||||
"wall_transition_filter_deviation": "25%",
|
||||
"wall_transition_length": "100%",
|
||||
"wipe_before_external_loop": "0",
|
||||
"wipe_on_loops": "0",
|
||||
"wipe_speed": "80%",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "100%",
|
||||
"wipe_tower_extruder": "0",
|
||||
"wipe_tower_max_purge_speed": "90",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"wipe_tower_rotation_angle": "0",
|
||||
"wiping_volumes_extruders": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"xy_contour_compensation": "0",
|
||||
"xy_hole_compensation": "0",
|
||||
"solid_infill_rotate_template": ""
|
||||
}
|
||||
+291
@@ -0,0 +1,291 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004_kobra_neo",
|
||||
"instantiation": "true",
|
||||
"print_settings_id": "0.16mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle",
|
||||
"layer_height": "0.16",
|
||||
"filename_format": "{input_filename_base}_{filament_type[0]}_{layer_height}_{print_time}.gcode",
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra Neo 0.4 nozzle"
|
||||
],
|
||||
"accel_to_decel_enable": "1",
|
||||
"accel_to_decel_factor": "50%",
|
||||
"adaptive_layer_height": "1",
|
||||
"alternate_extra_wall": "0",
|
||||
"bottom_shell_layers": "4",
|
||||
"bottom_shell_thickness": "0.6",
|
||||
"bottom_solid_infill_flow_ratio": "1",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bridge_acceleration": "50%",
|
||||
"bridge_angle": "0",
|
||||
"bridge_density": "100%",
|
||||
"bridge_flow": "0.9",
|
||||
"bridge_no_support": "1",
|
||||
"bridge_speed": "30",
|
||||
"brim_ears_detection_length": "1",
|
||||
"brim_ears_max_angle": "125",
|
||||
"brim_object_gap": "0.15",
|
||||
"brim_type": "outer_only",
|
||||
"brim_width": "5",
|
||||
"compatible_printers_condition": "",
|
||||
"counterbore_hole_bridging": "none",
|
||||
"default_acceleration": "2000",
|
||||
"default_jerk": "0",
|
||||
"detect_narrow_internal_solid_infill": "1",
|
||||
"detect_overhang_wall": "1",
|
||||
"detect_thin_wall": "0",
|
||||
"dont_filter_internal_bridges": "disabled",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"elefant_foot_compensation_layers": "1",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"enable_support": "0",
|
||||
"enforce_support_layers": "0",
|
||||
"ensure_vertical_shell_thickness": "ensure_all",
|
||||
"exclude_object": "0",
|
||||
"extra_perimeters_on_overhangs": "1",
|
||||
"filter_out_gap_fill": "0",
|
||||
"flush_into_infill": "0",
|
||||
"flush_into_objects": "0",
|
||||
"flush_into_support": "0",
|
||||
"fuzzy_skin": "none",
|
||||
"fuzzy_skin_first_layer": "0",
|
||||
"fuzzy_skin_point_distance": "0.8",
|
||||
"fuzzy_skin_thickness": "0.3",
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "100",
|
||||
"gcode_add_line_number": "0",
|
||||
"gcode_comments": "0",
|
||||
"gcode_label_objects": "1",
|
||||
"hole_to_polyhole": "0",
|
||||
"hole_to_polyhole_threshold": "0.01",
|
||||
"hole_to_polyhole_twisted": "1",
|
||||
"independent_support_layer_height": "1",
|
||||
"infill_anchor": "400",
|
||||
"infill_anchor_max": "10",
|
||||
"infill_combination": "0",
|
||||
"infill_direction": "45",
|
||||
"infill_jerk": "9",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "45",
|
||||
"initial_layer_jerk": "9",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_min_bead_width": "85%",
|
||||
"initial_layer_print_height": "0.2",
|
||||
"initial_layer_speed": "45",
|
||||
"initial_layer_travel_speed": "100%",
|
||||
"inner_wall_acceleration": "1500",
|
||||
"inner_wall_jerk": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "100",
|
||||
"interface_shells": "0",
|
||||
"internal_bridge_flow": "1",
|
||||
"internal_bridge_speed": "150%",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_pattern": "zig-zag",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"ironing_angle": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_pattern": "zig-zag",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"is_infill_first": "0",
|
||||
"line_width": "0.42",
|
||||
"make_overhang_printable": "0",
|
||||
"make_overhang_printable_angle": "55",
|
||||
"make_overhang_printable_hole_size": "0",
|
||||
"max_bridge_length": "10",
|
||||
"max_travel_detour_distance": "0",
|
||||
"max_volumetric_extrusion_rate_slope": "0",
|
||||
"max_volumetric_extrusion_rate_slope_segment_length": "5",
|
||||
"min_bead_width": "85%",
|
||||
"min_feature_size": "25%",
|
||||
"min_length_factor": "0.5",
|
||||
"min_width_top_surface": "300%",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"mmu_segmented_region_interlocking_depth": "0",
|
||||
"mmu_segmented_region_max_width": "0",
|
||||
"notes": "",
|
||||
"only_one_wall_first_layer": "0",
|
||||
"only_one_wall_top": "1",
|
||||
"ooze_prevention": "0",
|
||||
"outer_wall_acceleration": "1000",
|
||||
"outer_wall_jerk": "10",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "60",
|
||||
"overhang_1_4_speed": "50",
|
||||
"overhang_2_4_speed": "30",
|
||||
"overhang_3_4_speed": "20",
|
||||
"overhang_4_4_speed": "10",
|
||||
"overhang_reverse": "0",
|
||||
"overhang_reverse_internal_only": "0",
|
||||
"overhang_reverse_threshold": "50%",
|
||||
"overhang_speed_classic": "1",
|
||||
"post_process": [],
|
||||
"precise_outer_wall": "0",
|
||||
"precise_z_height": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "45",
|
||||
"prime_volume": "45",
|
||||
"print_flow_ratio": "1",
|
||||
"print_order": "default",
|
||||
"print_sequence": "by layer",
|
||||
"raft_contact_distance": "0.1",
|
||||
"raft_expansion": "1.5",
|
||||
"raft_first_layer_density": "90%",
|
||||
"raft_first_layer_expansion": "2",
|
||||
"raft_layers": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"role_based_wipe_speed": "1",
|
||||
"rotate_solid_infill_direction": "1",
|
||||
"scarf_angle_threshold": "155",
|
||||
"scarf_joint_flow_ratio": "1",
|
||||
"scarf_joint_speed": "100%",
|
||||
"scarf_overhang_threshold": "40%",
|
||||
"seam_gap": "15%",
|
||||
"seam_position": "aligned",
|
||||
"seam_slope_conditional": "0",
|
||||
"seam_slope_entire_loop": "0",
|
||||
"seam_slope_inner_walls": "0",
|
||||
"seam_slope_min_length": "20",
|
||||
"seam_slope_start_height": "0",
|
||||
"seam_slope_steps": "10",
|
||||
"seam_slope_type": "none",
|
||||
"single_extruder_multi_material_priming": "0",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "0",
|
||||
"skirt_speed": "50",
|
||||
"slice_closing_radius": "0.049",
|
||||
"slicing_mode": "regular",
|
||||
"slow_down_layers": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_area_infill_flow_compensation": "0",
|
||||
"small_area_infill_flow_compensation_model": [
|
||||
"0,0",
|
||||
"\n0.2,0.4444",
|
||||
"\n0.4,0.6145",
|
||||
"\n0.6,0.7059",
|
||||
"\n0.8,0.7619",
|
||||
"\n1.5,0.8571",
|
||||
"\n2,0.8889",
|
||||
"\n3,0.9231",
|
||||
"\n5,0.9520",
|
||||
"\n10,1"
|
||||
],
|
||||
"small_perimeter_speed": "50%",
|
||||
"small_perimeter_threshold": "0",
|
||||
"solid_infill_direction": "45",
|
||||
"solid_infill_filament": "1",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_filament": "1",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"sparse_infill_speed": "150",
|
||||
"spiral_mode": "0",
|
||||
"spiral_mode_max_xy_smoothing": "200%",
|
||||
"spiral_mode_smooth": "0",
|
||||
"staggered_inner_seams": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"support_angle": "0",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_critical_regions_only": "0",
|
||||
"support_expansion": "0",
|
||||
"support_filament": "0",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_not_for_body": "1",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.4",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_remove_small_overhang": "1",
|
||||
"support_speed": "100",
|
||||
"support_style": "default",
|
||||
"support_threshold_angle": "40",
|
||||
"support_top_z_distance": "0.1",
|
||||
"support_type": "tree(auto)",
|
||||
"thick_bridges": "0",
|
||||
"thick_internal_bridges": "1",
|
||||
"timelapse_type": "0",
|
||||
"top_bottom_infill_wall_overlap": "25%",
|
||||
"top_shell_layers": "4",
|
||||
"top_shell_thickness": "1",
|
||||
"top_solid_infill_flow_ratio": "1",
|
||||
"top_surface_acceleration": "1000",
|
||||
"top_surface_jerk": "9",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_speed": "60",
|
||||
"travel_acceleration": "2000",
|
||||
"travel_jerk": "10",
|
||||
"travel_speed": "300",
|
||||
"travel_speed_z": "0",
|
||||
"tree_support_adaptive_layer_height": "1",
|
||||
"tree_support_angle_slow": "25",
|
||||
"tree_support_auto_brim": "1",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_branch_angle_organic": "40",
|
||||
"tree_support_branch_diameter": "5",
|
||||
"tree_support_branch_diameter_angle": "5",
|
||||
"tree_support_branch_diameter_double_wall": "3",
|
||||
"tree_support_branch_diameter_organic": "2",
|
||||
"tree_support_branch_distance": "5",
|
||||
"tree_support_branch_distance_organic": "1",
|
||||
"tree_support_brim_width": "3",
|
||||
"tree_support_tip_diameter": "0.8",
|
||||
"tree_support_top_rate": "30%",
|
||||
"tree_support_wall_count": "0",
|
||||
"wall_direction": "auto",
|
||||
"wall_distribution_count": "1",
|
||||
"wall_filament": "1",
|
||||
"wall_generator": "classic",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_loops": "2",
|
||||
"wall_sequence": "outer wall/inner wall",
|
||||
"wall_transition_angle": "10",
|
||||
"wall_transition_filter_deviation": "25%",
|
||||
"wall_transition_length": "100%",
|
||||
"wipe_before_external_loop": "0",
|
||||
"wipe_on_loops": "0",
|
||||
"wipe_speed": "80%",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "100%",
|
||||
"wipe_tower_extruder": "0",
|
||||
"wipe_tower_max_purge_speed": "90",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"wipe_tower_rotation_angle": "0",
|
||||
"wiping_volumes_extruders": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"xy_contour_compensation": "0",
|
||||
"xy_hole_compensation": "0.1"
|
||||
}
|
||||
+291
@@ -0,0 +1,291 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004_kobra_neo",
|
||||
"instantiation": "true",
|
||||
"print_settings_id": "0.20mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle",
|
||||
"layer_height": "0.2",
|
||||
"filename_format": "{input_filename_base}_{filament_type[0]}_{layer_height}_{print_time}.gcode",
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra Neo 0.4 nozzle"
|
||||
],
|
||||
"accel_to_decel_enable": "1",
|
||||
"accel_to_decel_factor": "50%",
|
||||
"adaptive_layer_height": "1",
|
||||
"alternate_extra_wall": "0",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0.6",
|
||||
"bottom_solid_infill_flow_ratio": "1",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bridge_acceleration": "50%",
|
||||
"bridge_angle": "0",
|
||||
"bridge_density": "100%",
|
||||
"bridge_flow": "0.9",
|
||||
"bridge_no_support": "1",
|
||||
"bridge_speed": "30",
|
||||
"brim_ears_detection_length": "1",
|
||||
"brim_ears_max_angle": "125",
|
||||
"brim_object_gap": "0.15",
|
||||
"brim_type": "outer_only",
|
||||
"brim_width": "5",
|
||||
"compatible_printers_condition": "",
|
||||
"counterbore_hole_bridging": "none",
|
||||
"default_acceleration": "2000",
|
||||
"default_jerk": "0",
|
||||
"detect_narrow_internal_solid_infill": "1",
|
||||
"detect_overhang_wall": "1",
|
||||
"detect_thin_wall": "0",
|
||||
"dont_filter_internal_bridges": "disabled",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"elefant_foot_compensation_layers": "1",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"enable_support": "0",
|
||||
"enforce_support_layers": "0",
|
||||
"ensure_vertical_shell_thickness": "ensure_all",
|
||||
"exclude_object": "0",
|
||||
"extra_perimeters_on_overhangs": "1",
|
||||
"filter_out_gap_fill": "0",
|
||||
"flush_into_infill": "0",
|
||||
"flush_into_objects": "0",
|
||||
"flush_into_support": "0",
|
||||
"fuzzy_skin": "none",
|
||||
"fuzzy_skin_first_layer": "0",
|
||||
"fuzzy_skin_point_distance": "0.8",
|
||||
"fuzzy_skin_thickness": "0.3",
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "100",
|
||||
"gcode_add_line_number": "0",
|
||||
"gcode_comments": "0",
|
||||
"gcode_label_objects": "1",
|
||||
"hole_to_polyhole": "0",
|
||||
"hole_to_polyhole_threshold": "0.01",
|
||||
"hole_to_polyhole_twisted": "1",
|
||||
"independent_support_layer_height": "1",
|
||||
"infill_anchor": "400",
|
||||
"infill_anchor_max": "10",
|
||||
"infill_combination": "0",
|
||||
"infill_direction": "45",
|
||||
"infill_jerk": "9",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "50",
|
||||
"initial_layer_jerk": "9",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_min_bead_width": "85%",
|
||||
"initial_layer_print_height": "0.24",
|
||||
"initial_layer_speed": "50",
|
||||
"initial_layer_travel_speed": "100%",
|
||||
"inner_wall_acceleration": "1500",
|
||||
"inner_wall_jerk": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "100",
|
||||
"interface_shells": "0",
|
||||
"internal_bridge_flow": "1",
|
||||
"internal_bridge_speed": "150%",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_pattern": "zig-zag",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"ironing_angle": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_pattern": "zig-zag",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"is_infill_first": "0",
|
||||
"line_width": "0.42",
|
||||
"make_overhang_printable": "0",
|
||||
"make_overhang_printable_angle": "55",
|
||||
"make_overhang_printable_hole_size": "0",
|
||||
"max_bridge_length": "10",
|
||||
"max_travel_detour_distance": "0",
|
||||
"max_volumetric_extrusion_rate_slope": "0",
|
||||
"max_volumetric_extrusion_rate_slope_segment_length": "5",
|
||||
"min_bead_width": "85%",
|
||||
"min_feature_size": "25%",
|
||||
"min_length_factor": "0.5",
|
||||
"min_width_top_surface": "300%",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"mmu_segmented_region_interlocking_depth": "0",
|
||||
"mmu_segmented_region_max_width": "0",
|
||||
"notes": "",
|
||||
"only_one_wall_first_layer": "0",
|
||||
"only_one_wall_top": "1",
|
||||
"ooze_prevention": "0",
|
||||
"outer_wall_acceleration": "1000",
|
||||
"outer_wall_jerk": "10",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "60",
|
||||
"overhang_1_4_speed": "60",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "10",
|
||||
"overhang_reverse": "0",
|
||||
"overhang_reverse_internal_only": "0",
|
||||
"overhang_reverse_threshold": "50%",
|
||||
"overhang_speed_classic": "1",
|
||||
"post_process": [],
|
||||
"precise_outer_wall": "0",
|
||||
"precise_z_height": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "45",
|
||||
"prime_volume": "45",
|
||||
"print_flow_ratio": "1",
|
||||
"print_order": "default",
|
||||
"print_sequence": "by layer",
|
||||
"raft_contact_distance": "0.1",
|
||||
"raft_expansion": "1.5",
|
||||
"raft_first_layer_density": "90%",
|
||||
"raft_first_layer_expansion": "2",
|
||||
"raft_layers": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"role_based_wipe_speed": "1",
|
||||
"rotate_solid_infill_direction": "1",
|
||||
"scarf_angle_threshold": "155",
|
||||
"scarf_joint_flow_ratio": "1",
|
||||
"scarf_joint_speed": "100%",
|
||||
"scarf_overhang_threshold": "40%",
|
||||
"seam_gap": "15%",
|
||||
"seam_position": "aligned",
|
||||
"seam_slope_conditional": "0",
|
||||
"seam_slope_entire_loop": "0",
|
||||
"seam_slope_inner_walls": "0",
|
||||
"seam_slope_min_length": "20",
|
||||
"seam_slope_start_height": "0",
|
||||
"seam_slope_steps": "10",
|
||||
"seam_slope_type": "none",
|
||||
"single_extruder_multi_material_priming": "0",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "0",
|
||||
"skirt_speed": "50",
|
||||
"slice_closing_radius": "0.049",
|
||||
"slicing_mode": "regular",
|
||||
"slow_down_layers": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_area_infill_flow_compensation": "0",
|
||||
"small_area_infill_flow_compensation_model": [
|
||||
"0,0",
|
||||
"\n0.2,0.4444",
|
||||
"\n0.4,0.6145",
|
||||
"\n0.6,0.7059",
|
||||
"\n0.8,0.7619",
|
||||
"\n1.5,0.8571",
|
||||
"\n2,0.8889",
|
||||
"\n3,0.9231",
|
||||
"\n5,0.9520",
|
||||
"\n10,1"
|
||||
],
|
||||
"small_perimeter_speed": "50%",
|
||||
"small_perimeter_threshold": "0",
|
||||
"solid_infill_direction": "45",
|
||||
"solid_infill_filament": "1",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_filament": "1",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"sparse_infill_speed": "150",
|
||||
"spiral_mode": "0",
|
||||
"spiral_mode_max_xy_smoothing": "200%",
|
||||
"spiral_mode_smooth": "0",
|
||||
"staggered_inner_seams": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"support_angle": "0",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_critical_regions_only": "0",
|
||||
"support_expansion": "0",
|
||||
"support_filament": "0",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_not_for_body": "1",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.4",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_remove_small_overhang": "1",
|
||||
"support_speed": "100",
|
||||
"support_style": "default",
|
||||
"support_threshold_angle": "40",
|
||||
"support_top_z_distance": "0.1",
|
||||
"support_type": "tree(auto)",
|
||||
"thick_bridges": "0",
|
||||
"thick_internal_bridges": "1",
|
||||
"timelapse_type": "0",
|
||||
"top_bottom_infill_wall_overlap": "25%",
|
||||
"top_shell_layers": "3",
|
||||
"top_shell_thickness": "1",
|
||||
"top_solid_infill_flow_ratio": "1",
|
||||
"top_surface_acceleration": "1000",
|
||||
"top_surface_jerk": "9",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_speed": "60",
|
||||
"travel_acceleration": "2000",
|
||||
"travel_jerk": "10",
|
||||
"travel_speed": "300",
|
||||
"travel_speed_z": "0",
|
||||
"tree_support_adaptive_layer_height": "1",
|
||||
"tree_support_angle_slow": "25",
|
||||
"tree_support_auto_brim": "1",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_branch_angle_organic": "40",
|
||||
"tree_support_branch_diameter": "5",
|
||||
"tree_support_branch_diameter_angle": "5",
|
||||
"tree_support_branch_diameter_double_wall": "3",
|
||||
"tree_support_branch_diameter_organic": "2",
|
||||
"tree_support_branch_distance": "5",
|
||||
"tree_support_branch_distance_organic": "1",
|
||||
"tree_support_brim_width": "3",
|
||||
"tree_support_tip_diameter": "0.8",
|
||||
"tree_support_top_rate": "30%",
|
||||
"tree_support_wall_count": "0",
|
||||
"wall_direction": "auto",
|
||||
"wall_distribution_count": "1",
|
||||
"wall_filament": "1",
|
||||
"wall_generator": "classic",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_loops": "2",
|
||||
"wall_sequence": "outer wall/inner wall",
|
||||
"wall_transition_angle": "10",
|
||||
"wall_transition_filter_deviation": "25%",
|
||||
"wall_transition_length": "100%",
|
||||
"wipe_before_external_loop": "0",
|
||||
"wipe_on_loops": "0",
|
||||
"wipe_speed": "80%",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "100%",
|
||||
"wipe_tower_extruder": "0",
|
||||
"wipe_tower_max_purge_speed": "90",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"wipe_tower_rotation_angle": "0",
|
||||
"wiping_volumes_extruders": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"xy_contour_compensation": "0",
|
||||
"xy_hole_compensation": "0.1"
|
||||
}
|
||||
+291
@@ -0,0 +1,291 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle",
|
||||
"inherits": "fdm_process_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004_kobra_neo",
|
||||
"instantiation": "true",
|
||||
"print_settings_id": "0.28mm Standard @Anycubic Kobra 2 Neo 0.4 nozzle",
|
||||
"layer_height": "0.28",
|
||||
"filename_format": "{input_filename_base}_{filament_type[0]}_{layer_height}_{print_time}.gcode",
|
||||
"compatible_printers": [
|
||||
"Anycubic Kobra Neo 0.4 nozzle"
|
||||
],
|
||||
"accel_to_decel_enable": "1",
|
||||
"accel_to_decel_factor": "50%",
|
||||
"adaptive_layer_height": "1",
|
||||
"alternate_extra_wall": "0",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0.6",
|
||||
"bottom_solid_infill_flow_ratio": "1",
|
||||
"bottom_surface_pattern": "monotonic",
|
||||
"bridge_acceleration": "50%",
|
||||
"bridge_angle": "0",
|
||||
"bridge_density": "100%",
|
||||
"bridge_flow": "0.9",
|
||||
"bridge_no_support": "1",
|
||||
"bridge_speed": "30",
|
||||
"brim_ears_detection_length": "1",
|
||||
"brim_ears_max_angle": "125",
|
||||
"brim_object_gap": "0.15",
|
||||
"brim_type": "outer_only",
|
||||
"brim_width": "5",
|
||||
"compatible_printers_condition": "",
|
||||
"counterbore_hole_bridging": "none",
|
||||
"default_acceleration": "2000",
|
||||
"default_jerk": "0",
|
||||
"detect_narrow_internal_solid_infill": "1",
|
||||
"detect_overhang_wall": "1",
|
||||
"detect_thin_wall": "0",
|
||||
"dont_filter_internal_bridges": "disabled",
|
||||
"draft_shield": "disabled",
|
||||
"elefant_foot_compensation": "0.075",
|
||||
"elefant_foot_compensation_layers": "1",
|
||||
"enable_arc_fitting": "1",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_prime_tower": "1",
|
||||
"enable_support": "0",
|
||||
"enforce_support_layers": "0",
|
||||
"ensure_vertical_shell_thickness": "ensure_all",
|
||||
"exclude_object": "0",
|
||||
"extra_perimeters_on_overhangs": "1",
|
||||
"filter_out_gap_fill": "0",
|
||||
"flush_into_infill": "0",
|
||||
"flush_into_objects": "0",
|
||||
"flush_into_support": "0",
|
||||
"fuzzy_skin": "none",
|
||||
"fuzzy_skin_first_layer": "0",
|
||||
"fuzzy_skin_point_distance": "0.8",
|
||||
"fuzzy_skin_thickness": "0.3",
|
||||
"gap_fill_target": "topbottom",
|
||||
"gap_infill_speed": "80",
|
||||
"gcode_add_line_number": "0",
|
||||
"gcode_comments": "0",
|
||||
"gcode_label_objects": "1",
|
||||
"hole_to_polyhole": "0",
|
||||
"hole_to_polyhole_threshold": "0.01",
|
||||
"hole_to_polyhole_twisted": "1",
|
||||
"independent_support_layer_height": "1",
|
||||
"infill_anchor": "400",
|
||||
"infill_anchor_max": "10",
|
||||
"infill_combination": "0",
|
||||
"infill_direction": "45",
|
||||
"infill_jerk": "9",
|
||||
"infill_wall_overlap": "15%",
|
||||
"initial_layer_acceleration": "500",
|
||||
"initial_layer_infill_speed": "45",
|
||||
"initial_layer_jerk": "9",
|
||||
"initial_layer_line_width": "0.5",
|
||||
"initial_layer_min_bead_width": "85%",
|
||||
"initial_layer_print_height": "0.28",
|
||||
"initial_layer_speed": "45",
|
||||
"initial_layer_travel_speed": "100%",
|
||||
"inner_wall_acceleration": "1500",
|
||||
"inner_wall_jerk": "10",
|
||||
"inner_wall_line_width": "0.45",
|
||||
"inner_wall_speed": "100",
|
||||
"interface_shells": "0",
|
||||
"internal_bridge_flow": "1",
|
||||
"internal_bridge_speed": "150%",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"internal_solid_infill_line_width": "0.42",
|
||||
"internal_solid_infill_pattern": "zig-zag",
|
||||
"internal_solid_infill_speed": "100",
|
||||
"ironing_angle": "0",
|
||||
"ironing_flow": "15%",
|
||||
"ironing_pattern": "zig-zag",
|
||||
"ironing_spacing": "0.1",
|
||||
"ironing_speed": "15",
|
||||
"ironing_type": "no ironing",
|
||||
"is_infill_first": "0",
|
||||
"line_width": "0.42",
|
||||
"make_overhang_printable": "0",
|
||||
"make_overhang_printable_angle": "55",
|
||||
"make_overhang_printable_hole_size": "0",
|
||||
"max_bridge_length": "10",
|
||||
"max_travel_detour_distance": "0",
|
||||
"max_volumetric_extrusion_rate_slope": "0",
|
||||
"max_volumetric_extrusion_rate_slope_segment_length": "5",
|
||||
"min_bead_width": "85%",
|
||||
"min_feature_size": "25%",
|
||||
"min_length_factor": "0.5",
|
||||
"min_width_top_surface": "300%",
|
||||
"minimum_sparse_infill_area": "15",
|
||||
"mmu_segmented_region_interlocking_depth": "0",
|
||||
"mmu_segmented_region_max_width": "0",
|
||||
"notes": "",
|
||||
"only_one_wall_first_layer": "0",
|
||||
"only_one_wall_top": "1",
|
||||
"ooze_prevention": "0",
|
||||
"outer_wall_acceleration": "1000",
|
||||
"outer_wall_jerk": "10",
|
||||
"outer_wall_line_width": "0.42",
|
||||
"outer_wall_speed": "55",
|
||||
"overhang_1_4_speed": "50",
|
||||
"overhang_2_4_speed": "50",
|
||||
"overhang_3_4_speed": "30",
|
||||
"overhang_4_4_speed": "10",
|
||||
"overhang_reverse": "0",
|
||||
"overhang_reverse_internal_only": "0",
|
||||
"overhang_reverse_threshold": "50%",
|
||||
"overhang_speed_classic": "1",
|
||||
"post_process": [],
|
||||
"precise_outer_wall": "0",
|
||||
"precise_z_height": "0",
|
||||
"prime_tower_brim_width": "5",
|
||||
"prime_tower_width": "45",
|
||||
"prime_volume": "45",
|
||||
"print_flow_ratio": "1",
|
||||
"print_order": "default",
|
||||
"print_sequence": "by layer",
|
||||
"raft_contact_distance": "0.1",
|
||||
"raft_expansion": "1.5",
|
||||
"raft_first_layer_density": "90%",
|
||||
"raft_first_layer_expansion": "2",
|
||||
"raft_layers": "0",
|
||||
"reduce_crossing_wall": "0",
|
||||
"reduce_infill_retraction": "1",
|
||||
"resolution": "0.012",
|
||||
"role_based_wipe_speed": "1",
|
||||
"rotate_solid_infill_direction": "1",
|
||||
"scarf_angle_threshold": "155",
|
||||
"scarf_joint_flow_ratio": "1",
|
||||
"scarf_joint_speed": "100%",
|
||||
"scarf_overhang_threshold": "40%",
|
||||
"seam_gap": "15%",
|
||||
"seam_position": "aligned",
|
||||
"seam_slope_conditional": "0",
|
||||
"seam_slope_entire_loop": "0",
|
||||
"seam_slope_inner_walls": "0",
|
||||
"seam_slope_min_length": "20",
|
||||
"seam_slope_start_height": "0",
|
||||
"seam_slope_steps": "10",
|
||||
"seam_slope_type": "none",
|
||||
"single_extruder_multi_material_priming": "0",
|
||||
"skirt_distance": "2",
|
||||
"skirt_height": "1",
|
||||
"skirt_loops": "0",
|
||||
"skirt_speed": "50",
|
||||
"slice_closing_radius": "0.049",
|
||||
"slicing_mode": "regular",
|
||||
"slow_down_layers": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_area_infill_flow_compensation": "0",
|
||||
"small_area_infill_flow_compensation_model": [
|
||||
"0,0",
|
||||
"\n0.2,0.4444",
|
||||
"\n0.4,0.6145",
|
||||
"\n0.6,0.7059",
|
||||
"\n0.8,0.7619",
|
||||
"\n1.5,0.8571",
|
||||
"\n2,0.8889",
|
||||
"\n3,0.9231",
|
||||
"\n5,0.9520",
|
||||
"\n10,1"
|
||||
],
|
||||
"small_perimeter_speed": "50%",
|
||||
"small_perimeter_threshold": "0",
|
||||
"solid_infill_direction": "45",
|
||||
"solid_infill_filament": "1",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"sparse_infill_density": "15%",
|
||||
"sparse_infill_filament": "1",
|
||||
"sparse_infill_line_width": "0.45",
|
||||
"sparse_infill_pattern": "crosshatch",
|
||||
"sparse_infill_speed": "120",
|
||||
"spiral_mode": "0",
|
||||
"spiral_mode_max_xy_smoothing": "200%",
|
||||
"spiral_mode_smooth": "0",
|
||||
"staggered_inner_seams": "0",
|
||||
"standby_temperature_delta": "-5",
|
||||
"support_angle": "0",
|
||||
"support_base_pattern": "rectilinear",
|
||||
"support_base_pattern_spacing": "0.2",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.1",
|
||||
"support_critical_regions_only": "0",
|
||||
"support_expansion": "0",
|
||||
"support_filament": "0",
|
||||
"support_interface_bottom_layers": "-1",
|
||||
"support_interface_filament": "0",
|
||||
"support_interface_loop_pattern": "0",
|
||||
"support_interface_not_for_body": "1",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_interface_spacing": "0.5",
|
||||
"support_interface_speed": "80",
|
||||
"support_interface_top_layers": "2",
|
||||
"support_line_width": "0.4",
|
||||
"support_object_xy_distance": "0.35",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_remove_small_overhang": "1",
|
||||
"support_speed": "100",
|
||||
"support_style": "default",
|
||||
"support_threshold_angle": "40",
|
||||
"support_top_z_distance": "0.1",
|
||||
"support_type": "tree(auto)",
|
||||
"thick_bridges": "0",
|
||||
"thick_internal_bridges": "1",
|
||||
"timelapse_type": "0",
|
||||
"top_bottom_infill_wall_overlap": "25%",
|
||||
"top_shell_layers": "3",
|
||||
"top_shell_thickness": "1",
|
||||
"top_solid_infill_flow_ratio": "1",
|
||||
"top_surface_acceleration": "1000",
|
||||
"top_surface_jerk": "9",
|
||||
"top_surface_line_width": "0.42",
|
||||
"top_surface_pattern": "monotonicline",
|
||||
"top_surface_speed": "60",
|
||||
"travel_acceleration": "2000",
|
||||
"travel_jerk": "10",
|
||||
"travel_speed": "300",
|
||||
"travel_speed_z": "0",
|
||||
"tree_support_adaptive_layer_height": "1",
|
||||
"tree_support_angle_slow": "25",
|
||||
"tree_support_auto_brim": "1",
|
||||
"tree_support_branch_angle": "40",
|
||||
"tree_support_branch_angle_organic": "40",
|
||||
"tree_support_branch_diameter": "5",
|
||||
"tree_support_branch_diameter_angle": "5",
|
||||
"tree_support_branch_diameter_double_wall": "3",
|
||||
"tree_support_branch_diameter_organic": "2",
|
||||
"tree_support_branch_distance": "5",
|
||||
"tree_support_branch_distance_organic": "1",
|
||||
"tree_support_brim_width": "3",
|
||||
"tree_support_tip_diameter": "0.8",
|
||||
"tree_support_top_rate": "30%",
|
||||
"tree_support_wall_count": "0",
|
||||
"wall_direction": "auto",
|
||||
"wall_distribution_count": "1",
|
||||
"wall_filament": "1",
|
||||
"wall_generator": "classic",
|
||||
"wall_infill_order": "inner wall/outer wall/infill",
|
||||
"wall_loops": "2",
|
||||
"wall_sequence": "outer wall/inner wall",
|
||||
"wall_transition_angle": "10",
|
||||
"wall_transition_filter_deviation": "25%",
|
||||
"wall_transition_length": "100%",
|
||||
"wipe_before_external_loop": "0",
|
||||
"wipe_on_loops": "0",
|
||||
"wipe_speed": "80%",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"wipe_tower_extra_spacing": "100%",
|
||||
"wipe_tower_extruder": "0",
|
||||
"wipe_tower_max_purge_speed": "90",
|
||||
"wipe_tower_no_sparse_layers": "0",
|
||||
"wipe_tower_rotation_angle": "0",
|
||||
"wiping_volumes_extruders": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"xy_contour_compensation": "0",
|
||||
"xy_hole_compensation": "0.1"
|
||||
}
|
||||
File diff suppressed because one or more lines are too long
+140
-196
@@ -1068,14 +1068,6 @@
|
||||
}
|
||||
],
|
||||
"filament_list": [
|
||||
{
|
||||
"name": "Elegoo PC @base",
|
||||
"sub_path": "filament/BASE/Elegoo PC @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo TPU @base",
|
||||
"sub_path": "filament/BASE/Elegoo TPU @base.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_elegoo_filament_common",
|
||||
"sub_path": "filament/ELEGOO/fdm_elegoo_filament_common.json"
|
||||
@@ -1084,30 +1076,6 @@
|
||||
"name": "fdm_filament_common",
|
||||
"sub_path": "filament/fdm_filament_common.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PC @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PC @0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PC @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PC @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PC-FR @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PC-FR @0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PC-FR @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PC-FR @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo RAPID TPU 95A @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo RAPID TPU 95A @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo TPU 95A @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo TPU 95A @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_elegoo_filament_asa",
|
||||
"sub_path": "filament/ELEGOO/fdm_elegoo_filament_asa.json"
|
||||
@@ -1144,46 +1112,6 @@
|
||||
"name": "fdm_filament_pla",
|
||||
"sub_path": "filament/fdm_filament_pla.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo ASA @base",
|
||||
"sub_path": "filament/BASE/Elegoo ASA @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG PRO @base",
|
||||
"sub_path": "filament/BASE/Elegoo PETG PRO @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo RAPID PETG @base",
|
||||
"sub_path": "filament/BASE/Elegoo RAPID PETG @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA @base",
|
||||
"sub_path": "filament/BASE/Elegoo PLA @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Matte @base",
|
||||
"sub_path": "filament/BASE/Elegoo PLA Matte @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Silk @base",
|
||||
"sub_path": "filament/BASE/Elegoo PLA Silk @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA-CF @base",
|
||||
"sub_path": "filament/BASE/Elegoo PLA-CF @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo RAPID PLA+ @base",
|
||||
"sub_path": "filament/BASE/Elegoo RAPID PLA+ @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo TPU 95A @base",
|
||||
"sub_path": "filament/BASE/Elegoo TPU 95A @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo ABS @base",
|
||||
"sub_path": "filament/BASE/Elegoo ABS @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Generic ABS @Elegoo",
|
||||
"sub_path": "filament/Generic/Generic ABS @Elegoo.json"
|
||||
@@ -1192,14 +1120,6 @@
|
||||
"name": "Generic ASA @Elegoo",
|
||||
"sub_path": "filament/Generic/Generic ASA @Elegoo.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PAHT @base",
|
||||
"sub_path": "filament/BASE/Elegoo PAHT @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG @base",
|
||||
"sub_path": "filament/BASE/Elegoo PETG @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Generic PETG @Elegoo",
|
||||
"sub_path": "filament/Generic/Generic PETG @Elegoo.json"
|
||||
@@ -1216,6 +1136,30 @@
|
||||
"name": "Generic PLA Matte @Elegoo",
|
||||
"sub_path": "filament/Generic/Generic PLA Matte @Elegoo.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo ASA @Elegoo Giga",
|
||||
"sub_path": "filament/EOSGIGA/Elegoo ASA @Elegoo Giga.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG PRO @Elegoo Giga",
|
||||
"sub_path": "filament/EOSGIGA/Elegoo PETG PRO @Elegoo Giga.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA @Elegoo Giga",
|
||||
"sub_path": "filament/EOSGIGA/Elegoo PLA @Elegoo Giga.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Matte @Elegoo Giga",
|
||||
"sub_path": "filament/EOSGIGA/Elegoo PLA Matte @Elegoo Giga.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo ABS @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo ABS @0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo ABS @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo ABS @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo ASA",
|
||||
"sub_path": "filament/ELEGOO/Elegoo ASA.json"
|
||||
@@ -1236,6 +1180,34 @@
|
||||
"name": "Elegoo ASA @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo ASA @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PAHT-CF @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PAHT-CF @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PC @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PC @0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PC @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PC @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PC-FR @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PC-FR @0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PC-FR @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PC-FR @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PETG @0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PETG @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG PRO",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PETG PRO.json"
|
||||
@@ -1253,24 +1225,24 @@
|
||||
"sub_path": "filament/ECC/Elegoo PETG PRO @ECC.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo RAPID PETG",
|
||||
"sub_path": "filament/ELEGOO/Elegoo RAPID PETG.json"
|
||||
"name": "Elegoo PETG PRO @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PETG PRO @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo RAPID PETG @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo RAPID PETG @0.2 nozzle.json"
|
||||
"name": "Elegoo PETG Translucent @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PETG Translucent @0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo RAPID PETG @EC",
|
||||
"sub_path": "filament/EC/Elegoo RAPID PETG @EC.json"
|
||||
"name": "Elegoo PETG Translucent @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PETG Translucent @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo RAPID PETG @ECC",
|
||||
"sub_path": "filament/ECC/Elegoo RAPID PETG @ECC.json"
|
||||
"name": "Elegoo PETG-CF @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PETG-CF @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo RAPID PETG+",
|
||||
"sub_path": "filament/ELEGOO/Elegoo RAPID PETG+.json"
|
||||
"name": "Elegoo PETG-GF @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PETG-GF @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA",
|
||||
@@ -1308,6 +1280,22 @@
|
||||
"name": "Elegoo PLA Marble @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PLA Marble @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Matte",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PLA Matte.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Matte @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PLA Matte @0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Matte @EC",
|
||||
"sub_path": "filament/EC/Elegoo PLA Matte @EC.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Matte @ECC",
|
||||
"sub_path": "filament/ECC/Elegoo PLA Matte @ECC.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Matte @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PLA Matte @ECC2.json"
|
||||
@@ -1332,6 +1320,22 @@
|
||||
"name": "Elegoo PLA PRO @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PLA PRO @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Silk",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PLA Silk.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Silk @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PLA Silk @0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Silk @EC",
|
||||
"sub_path": "filament/EC/Elegoo PLA Silk @EC.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Silk @ECC",
|
||||
"sub_path": "filament/ECC/Elegoo PLA Silk @ECC.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Silk @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PLA Silk @ECC2.json"
|
||||
@@ -1364,46 +1368,6 @@
|
||||
"name": "Elegoo PLA+ @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PLA+ @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA-CF @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PLA-CF @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo RAPID PLA+ @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo RAPID PLA+ @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Matte",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PLA Matte.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Matte @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PLA Matte @0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Matte @EC",
|
||||
"sub_path": "filament/EC/Elegoo PLA Matte @EC.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Matte @ECC",
|
||||
"sub_path": "filament/ECC/Elegoo PLA Matte @ECC.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Silk",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PLA Silk.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Silk @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PLA Silk @0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Silk @EC",
|
||||
"sub_path": "filament/EC/Elegoo PLA Silk @EC.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Silk @ECC",
|
||||
"sub_path": "filament/ECC/Elegoo PLA Silk @ECC.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA-CF",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PLA-CF.json"
|
||||
@@ -1413,20 +1377,56 @@
|
||||
"sub_path": "filament/ECC/Elegoo PLA-CF @ECC.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo RAPID PLA+",
|
||||
"sub_path": "filament/ELEGOO/Elegoo RAPID PLA+.json"
|
||||
"name": "Elegoo PLA-CF @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PLA-CF @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo RAPID PLA+ @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo RAPID PLA+ @0.2 nozzle.json"
|
||||
"name": "Elegoo Rapid PETG",
|
||||
"sub_path": "filament/ELEGOO/Elegoo Rapid PETG.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo RAPID PLA+ @EC",
|
||||
"sub_path": "filament/EC/Elegoo RAPID PLA+ @EC.json"
|
||||
"name": "Elegoo Rapid PETG @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo Rapid PETG @0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo RAPID PLA+ @ECC",
|
||||
"sub_path": "filament/ECC/Elegoo RAPID PLA+ @ECC.json"
|
||||
"name": "Elegoo Rapid PETG @EC",
|
||||
"sub_path": "filament/EC/Elegoo Rapid PETG @EC.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo Rapid PETG @ECC",
|
||||
"sub_path": "filament/ECC/Elegoo Rapid PETG @ECC.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo Rapid PETG @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo Rapid PETG @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo Rapid PETG+",
|
||||
"sub_path": "filament/ELEGOO/Elegoo Rapid PETG+.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo Rapid PLA+",
|
||||
"sub_path": "filament/ELEGOO/Elegoo Rapid PLA+.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo Rapid PLA+ @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo Rapid PLA+ @0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo Rapid PLA+ @EC",
|
||||
"sub_path": "filament/EC/Elegoo Rapid PLA+ @EC.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo Rapid PLA+ @ECC",
|
||||
"sub_path": "filament/ECC/Elegoo Rapid PLA+ @ECC.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo Rapid PLA+ @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo Rapid PLA+ @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo Rapid TPU 95A @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo Rapid TPU 95A @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo TPU 95A @EC",
|
||||
@@ -1437,64 +1437,8 @@
|
||||
"sub_path": "filament/ECC/Elegoo TPU 95A @ECC.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo ABS @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo ABS @0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo ABS @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo ABS @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo ASA @Elegoo Giga",
|
||||
"sub_path": "filament/EOSGIGA/Elegoo ASA @Elegoo Giga.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PAHT-CF @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PAHT-CF @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PETG @0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PETG @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG PRO @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PETG PRO @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG Translucent @0.2 nozzle",
|
||||
"sub_path": "filament/ELEGOO/Elegoo PETG Translucent @0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG Translucent @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PETG Translucent @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG-CF @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PETG-CF @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG-GF @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo PETG-GF @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo RAPID PETG @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo RAPID PETG @ECC2.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG PRO @Elegoo Giga",
|
||||
"sub_path": "filament/EOSGIGA/Elegoo PETG PRO @Elegoo Giga.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA @Elegoo Giga",
|
||||
"sub_path": "filament/EOSGIGA/Elegoo PLA @Elegoo Giga.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Matte @Elegoo Giga",
|
||||
"sub_path": "filament/EOSGIGA/Elegoo PLA Matte @Elegoo Giga.json"
|
||||
"name": "Elegoo TPU 95A @ECC2",
|
||||
"sub_path": "filament/ECC2/Elegoo TPU 95A @ECC2.json"
|
||||
}
|
||||
],
|
||||
"machine_list": [
|
||||
|
||||
@@ -1,17 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo ASA @base",
|
||||
"inherits": "fdm_elegoo_filament_asa",
|
||||
"from": "system",
|
||||
"filament_id": "EASAB00",
|
||||
"instantiation": "false",
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
]
|
||||
}
|
||||
@@ -1,23 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA @base",
|
||||
"inherits": "fdm_elegoo_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "EPLAB00",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
@@ -1,20 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID PLA+ @base",
|
||||
"inherits": "fdm_elegoo_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "ERPLAPLUSB00",
|
||||
"instantiation": "false",
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
@@ -1,26 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo TPU 95A @base",
|
||||
"inherits": "fdm_elegoo_filament_tpu",
|
||||
"from": "system",
|
||||
"filament_id": "ETPU95AB00",
|
||||
"instantiation": "false",
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.6"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
+3
-2
@@ -1,7 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID PETG @EC",
|
||||
"inherits": "Elegoo RAPID PETG @base",
|
||||
"name": "Elegoo Rapid PETG @EC",
|
||||
"renamed_from": "Elegoo RAPID PETG @EC",
|
||||
"inherits": "Elegoo Rapid PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETGEC",
|
||||
"instantiation": "true",
|
||||
+3
-2
@@ -1,7 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID PLA+ @EC",
|
||||
"inherits": "Elegoo RAPID PLA+ @base",
|
||||
"name": "Elegoo Rapid PLA+ @EC",
|
||||
"renamed_from": "Elegoo RAPID PLA+ @EC",
|
||||
"inherits": "Elegoo Rapid PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPLAPLUSEC",
|
||||
"instantiation": "true",
|
||||
+3
-2
@@ -1,7 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID PETG @ECC",
|
||||
"inherits": "Elegoo RAPID PETG @base",
|
||||
"name": "Elegoo Rapid PETG @ECC",
|
||||
"renamed_from": "Elegoo RAPID PETG @ECC",
|
||||
"inherits": "Elegoo Rapid PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETGECC",
|
||||
"instantiation": "true",
|
||||
+3
-2
@@ -1,7 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID PLA+ @ECC",
|
||||
"inherits": "Elegoo RAPID PLA+ @base",
|
||||
"name": "Elegoo Rapid PLA+ @ECC",
|
||||
"renamed_from": "Elegoo RAPID PLA+ @ECC",
|
||||
"inherits": "Elegoo Rapid PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPLAPLUSECC",
|
||||
"instantiation": "true",
|
||||
+2
-1
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID PETG @ECC2",
|
||||
"name": "Elegoo Rapid PETG @ECC2",
|
||||
"renamed_from": "Elegoo RAPID PETG @ECC2",
|
||||
"inherits": "Elegoo PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETGECC2",
|
||||
+2
-1
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID PLA+ @ECC2",
|
||||
"name": "Elegoo Rapid PLA+ @ECC2",
|
||||
"renamed_from": "Elegoo RAPID PLA+ @ECC2",
|
||||
"inherits": "Elegoo PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPLAPLUSECC2",
|
||||
+2
-1
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID TPU 95A @ECC2",
|
||||
"name": "Elegoo Rapid TPU 95A @ECC2",
|
||||
"renamed_from": "Elegoo RAPID TPU 95A @ECC2",
|
||||
"inherits": "Elegoo TPU @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERTPU95AECC2",
|
||||
+3
-2
@@ -1,7 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID PETG @0.2 nozzle",
|
||||
"inherits": "Elegoo RAPID PETG @base",
|
||||
"name": "Elegoo Rapid PETG @0.2 nozzle",
|
||||
"renamed_from": "Elegoo RAPID PETG @0.2 nozzle",
|
||||
"inherits": "Elegoo Rapid PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETG00020",
|
||||
"instantiation": "true",
|
||||
+3
-2
@@ -1,7 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID PETG+",
|
||||
"inherits": "Elegoo RAPID PETG @base",
|
||||
"name": "Elegoo Rapid PETG+",
|
||||
"renamed_from": "Elegoo RAPID PETG+",
|
||||
"inherits": "Elegoo Rapid PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETGPLUS00",
|
||||
"instantiation": "true",
|
||||
+3
-2
@@ -1,7 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID PETG",
|
||||
"inherits": "Elegoo RAPID PETG @base",
|
||||
"name": "Elegoo Rapid PETG",
|
||||
"renamed_from": "Elegoo RAPID PETG",
|
||||
"inherits": "Elegoo Rapid PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPETG00",
|
||||
"instantiation": "true",
|
||||
+3
-2
@@ -1,7 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID PLA+ @0.2 nozzle",
|
||||
"inherits": "Elegoo RAPID PLA+ @base",
|
||||
"name": "Elegoo Rapid PLA+ @0.2 nozzle",
|
||||
"renamed_from": "Elegoo RAPID PLA+ @0.2 nozzle",
|
||||
"inherits": "Elegoo Rapid PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPLAPLUS00020",
|
||||
"instantiation": "true",
|
||||
+3
-2
@@ -1,7 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID PLA+",
|
||||
"inherits": "Elegoo RAPID PLA+ @base",
|
||||
"name": "Elegoo Rapid PLA+",
|
||||
"renamed_from": "Elegoo RAPID PLA+",
|
||||
"inherits": "Elegoo Rapid PLA+ @base",
|
||||
"from": "system",
|
||||
"setting_id": "ERPLAPLUS00",
|
||||
"instantiation": "true",
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "elegoo_centuri_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_centuri_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EC;Elegoo PLA @EC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EC;Elegoo RAPID PETG @0.2 nozzle;Elegoo RAPID PETG @EC;Elegoo RAPID PETG+;;Elegoo RAPID PLA+ @EC;Elegoo RAPID PLA+ @0.2 nozzle;Elegoo RAPID PLA+ @EC;Elegoo TPU 95A @EC"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @EC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @EC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @EC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @EC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @EC;Elegoo PLA @EC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @EC;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @EC;Elegoo Rapid PETG+;;Elegoo Rapid PLA+ @EC;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @EC;Elegoo TPU 95A @EC"
|
||||
}
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "elegoo_centuri_carbon_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_centuri_carbon_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC;Elegoo PLA-CF @ECC;Elegoo PLA @ECC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC;Elegoo RAPID PETG @0.2 nozzle;Elegoo RAPID PETG @ECC;Elegoo RAPID PETG+;Elegoo RAPID PLA+ @0.2 nozzle;Elegoo RAPID PLA+ @ECC;Elegoo TPU 95A @ECC"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC;Elegoo PLA-CF @ECC;Elegoo PLA @ECC;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @ECC;Elegoo Rapid PETG+;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @ECC;Elegoo TPU 95A @ECC"
|
||||
}
|
||||
@@ -8,5 +8,5 @@
|
||||
"bed_model": "elegoo_centuri_carbon_buildplate_model.stl",
|
||||
"bed_texture": "elegoo_centuri_carbon_buildplate_texture.png",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC2;Elegoo PETG @0.2 nozzle;Elegoo PETG @ECC2;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC2;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC2;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC2;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC2;Elegoo PLA-CF @ECC2;Elegoo PLA @ECC2;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC2;Elegoo RAPID PETG @0.2 nozzle;Elegoo RAPID PETG @ECC2;Elegoo RAPID PLA+ @0.2 nozzle;Elegoo RAPID PLA+ @ECC2;Elegoo TPU 95A @ECC2;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @ECC2;Elegoo PLA Galaxy @ECC2;Elegoo PLA Marble @ECC2; Elegoo PLA Sparkle @ECC2;Elegoo PLA Wood @ECC2;Elegoo RAPID TPU 95A @ECC2;Elegoo ABS @0.2 nozzle;Elegoo ABS @ECC2;Elegoo PAHT-CF @ECC2;Elegoo PC @0.2 nozzle;Elegoo PC @ECC2;Elegoo PC-FR @0.2 nozzle;Elegoo PC-FR @ECC2;Elegoo PETG-CF @ECC2;Elegoo PETG-GF @ECC2;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @ECC2"
|
||||
"default_materials": "Elegoo ASA @0.2 nozzle;Elegoo ASA @ECC2;Elegoo PETG @0.2 nozzle;Elegoo PETG @ECC2;Elegoo PETG PRO @0.2 nozzle;Elegoo PETG PRO @ECC2;Elegoo PLA @0.2 nozzle;Elegoo PLA Matte @0.2 nozzle;Elegoo PLA Matte @ECC2;Elegoo PLA PRO @0.2 nozzle;Elegoo PLA PRO @ECC2;Elegoo PLA Silk @0.2 nozzle;Elegoo PLA Silk @ECC2;Elegoo PLA-CF @ECC2;Elegoo PLA @ECC2;Elegoo PLA+ @0.2 nozzle;Elegoo PLA+ @ECC2;Elegoo Rapid PETG @0.2 nozzle;Elegoo Rapid PETG @ECC2;Elegoo Rapid PLA+ @0.2 nozzle;Elegoo Rapid PLA+ @ECC2;Elegoo TPU 95A @ECC2;Elegoo PLA Basic @0.2 nozzle;Elegoo PLA Basic @ECC2;Elegoo PLA Galaxy @ECC2;Elegoo PLA Marble @ECC2; Elegoo PLA Sparkle @ECC2;Elegoo PLA Wood @ECC2;Elegoo Rapid TPU 95A @ECC2;Elegoo ABS @0.2 nozzle;Elegoo ABS @ECC2;Elegoo PAHT-CF @ECC2;Elegoo PC @0.2 nozzle;Elegoo PC @ECC2;Elegoo PC-FR @0.2 nozzle;Elegoo PC-FR @ECC2;Elegoo PETG-CF @ECC2;Elegoo PETG-GF @ECC2;Elegoo PETG Translucent @0.2 nozzle;Elegoo PETG Translucent @ECC2"
|
||||
}
|
||||
|
||||
@@ -8,7 +8,7 @@
|
||||
"instantiation": "true",
|
||||
"bottom_shell_layers": "3",
|
||||
"bottom_shell_thickness": "0.6",
|
||||
"filename_format": "ECC2_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode",
|
||||
"filename_format": "ECC2_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}_{layer_height}_{print_time}.gcode",
|
||||
"min_width_top_surface": "50%",
|
||||
"enable_prime_tower": "1",
|
||||
"compatible_printers": [
|
||||
|
||||
@@ -7,7 +7,7 @@
|
||||
"setting_id": "PECC208040",
|
||||
"instantiation": "true",
|
||||
"sparse_infill_pattern": "zig-zag",
|
||||
"filename_format": "ECC2_{nozzle_diameter[0]}_{input_filename_base}_{filament_name}_{layer_height}_{print_time}.gcode",
|
||||
"filename_format": "ECC2_{nozzle_diameter[0]}_{input_filename_base}_{filament_type[0]}_{layer_height}_{print_time}.gcode",
|
||||
"min_width_top_surface": "50%",
|
||||
"enable_prime_tower": "1",
|
||||
"compatible_printers": [
|
||||
|
||||
@@ -9,6 +9,10 @@
|
||||
"name": "Flashforge AD5X",
|
||||
"sub_path": "machine/Flashforge AD5X.json"
|
||||
},
|
||||
{
|
||||
"name": "Flashforge Artemis",
|
||||
"sub_path": "machine/Flashforge Artemis.json"
|
||||
},
|
||||
{
|
||||
"name": "Flashforge Adventurer 3 Series",
|
||||
"sub_path": "machine/Flashforge Adventurer 3 Series.json"
|
||||
@@ -71,6 +75,10 @@
|
||||
"name": "0.20mm Standard @Flashforge AD4 0.4 Nozzle",
|
||||
"sub_path": "process/0.20mm Standard @Flashforge AD4 0.4 Nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Standard @Flashforge Artemis 0.4 Nozzle",
|
||||
"sub_path": "process/0.20mm Standard @Flashforge Artemis 0.4 Nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Standard @Flashforge Guider 2s 0.4 nozzle",
|
||||
"sub_path": "process/0.20mm Standard @Flashforge Guider 2s 0.4 nozzle.json"
|
||||
@@ -2471,6 +2479,10 @@
|
||||
"name": "fdm_adventurer5m_common",
|
||||
"sub_path": "machine/fdm_adventurer5m_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_artemis_common",
|
||||
"sub_path": "machine/fdm_artemis_common.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_guider3_common",
|
||||
"sub_path": "machine/fdm_guider3_common.json"
|
||||
@@ -2531,6 +2543,10 @@
|
||||
"name": "Flashforge Adventurer 5M Pro 0.8 Nozzle",
|
||||
"sub_path": "machine/Flashforge Adventurer 5M Pro 0.8 Nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Flashforge Artemis 0.4 Nozzle",
|
||||
"sub_path":"machine/Flashforge Artemis 0.4 Nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Flashforge Guider 3 Ultra 0.4 Nozzle",
|
||||
"sub_path": "machine/Flashforge Guider 3 Ultra 0.4 Nozzle.json"
|
||||
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 127 KiB |
+87
@@ -0,0 +1,87 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Generic PETG @Flashforge Artemis",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"setting_id": "FFFP02",
|
||||
"filament_id": "FFF03",
|
||||
"instantiation": "true",
|
||||
"filament_flow_ratio": [
|
||||
"1"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"30"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"support_material_interface_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"50"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode \n; right_extruder_material:PETG"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode\n"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Flashforge Artemis 0.4 Nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,28 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Flashforge Artemis 0.4 Nozzle",
|
||||
"inherits": "fdm_artemis_common",
|
||||
"from": "system",
|
||||
"setting_id": "GM001",
|
||||
"instantiation": "true",
|
||||
"printer_variant": "0.4",
|
||||
"printer_model": "Flashforge Artemis",
|
||||
"default_print_profile": "0.20mm Standard @Flashforge Artemis 0.4 Nozzle",
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.2"
|
||||
],
|
||||
"auxiliary_fan": "0",
|
||||
"host_type": "flashforge",
|
||||
"wipe": [
|
||||
"0"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,13 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Flashforge Artemis",
|
||||
"model_id": "Flashforge-Artemis",
|
||||
"nozzle_diameter": "0.4",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Flashforge",
|
||||
"host_type": "Flashforge",
|
||||
"bed_model": "",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "",
|
||||
"default_filament_profile": "Flashforge Generic PETG; Flashforge Generic PLA"
|
||||
}
|
||||
@@ -0,0 +1,68 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "fdm_artemis_common",
|
||||
"inherits": "fdm_flashforge_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"gcode_flavor": "marlin",
|
||||
"printable_area": [
|
||||
"-95x-97.5",
|
||||
"95x-97.5",
|
||||
"95x97.5",
|
||||
"-95x97.5"
|
||||
],
|
||||
"printable_height": "200",
|
||||
"machine_max_acceleration_e": [
|
||||
"500"
|
||||
],
|
||||
"machine_max_acceleration_extruding": "500",
|
||||
"machine_max_acceleration_retracting": "500",
|
||||
"machine_max_acceleration_travel": "500",
|
||||
"machine_max_acceleration_x": "500",
|
||||
"machine_max_acceleration_y": "500",
|
||||
"machine_max_acceleration_z": "100",
|
||||
"machine_max_speed_e": "30",
|
||||
"machine_max_speed_x": "150",
|
||||
"machine_max_speed_y": "150",
|
||||
"machine_max_speed_z": "20",
|
||||
"machine_max_jerk_e": "2.5",
|
||||
"machine_max_jerk_x": "8",
|
||||
"machine_max_jerk_y": "8",
|
||||
"machine_max_jerk_z": "0.4",
|
||||
"printer_settings_id": "Flashforge",
|
||||
"retraction_minimum_travel": "1",
|
||||
"retract_before_wipe": [
|
||||
"100%"
|
||||
],
|
||||
"retract_length_toolchange": "2",
|
||||
"deretraction_speed": "35",
|
||||
"retraction_speed": [
|
||||
"30"
|
||||
],
|
||||
"z_hop": "0.2",
|
||||
"single_extruder_multi_material": "1",
|
||||
"change_filament_gcode": "M600",
|
||||
"machine_pause_gcode": "M25",
|
||||
"default_filament_profile": [
|
||||
"Flashforge PLA"
|
||||
],
|
||||
"machine_start_gcode": "M118 X80.23 Y59.04 Z6.10 TO\nM140 S[bed_temperature_initial_layer] T0\nM104 S[nozzle_temperature_initial_layer] T0\nM107\nG90\nG28\nM132 X Y Z A B\nG1 Z50.000 F420\nG161 X Y F3300\nM7 T0\nM6 T0\nM651 S255\n",
|
||||
"machine_end_gcode": "G1 E-3 F3600\nG0 X50 Y50 F9000\nM104 S0 T0\nM140 S0 T0\nG162 Z F1800\nG28 X Y\nM132 X Y A B\nM652\nG91\nM18",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
|
||||
"scan_first_layer": "0",
|
||||
"thumbnails": "80x60",
|
||||
"use_relative_e_distances": "0",
|
||||
"z_hop_types": "Auto Lift",
|
||||
"wipe_distance": "2",
|
||||
"extruder_clearance_radius": "42.3",
|
||||
"extruder_clearance_height_to_rod": "24.93",
|
||||
"extruder_clearance_height_to_lid": "200",
|
||||
"manual_filament_change": "1",
|
||||
"nozzle_type": "undefine",
|
||||
"auxiliary_fan": "1",
|
||||
"parking_pos_retraction": "0",
|
||||
"cooling_tube_length": "0",
|
||||
"cooling_tube_retraction": "0",
|
||||
"extra_loading_move": "0"
|
||||
}
|
||||
+62
@@ -0,0 +1,62 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Flashforge Artemis 0.4 Nozzle",
|
||||
"inherits": "fdm_process_flashforge_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP001",
|
||||
"instantiation": "true",
|
||||
"layer_height": "0.18",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"line_width": "0.4",
|
||||
"initial_layer_line_width": "0.4",
|
||||
"outer_wall_line_width": "0.4",
|
||||
"inner_wall_line_width": "0.4",
|
||||
"top_surface_line_width": "0.4",
|
||||
"sparse_infill_line_width": "0.4",
|
||||
"internal_solid_infill_line_width": "0.4",
|
||||
"support_line_width": "0.4",
|
||||
"initial_layer_speed": "10",
|
||||
"initial_layer_acceleration": "50",
|
||||
"initial_layer_infill_speed": "10",
|
||||
"initial_layer_travel_speed": "40",
|
||||
"outer_wall_speed": "30",
|
||||
"inner_wall_speed": "42",
|
||||
"internal_solid_infill_speed": "30",
|
||||
"top_surface_speed": "30",
|
||||
"gap_infill_speed": "30",
|
||||
"support_speed": "100",
|
||||
"top_surface_acceleration": "50",
|
||||
"travel_speed": "100",
|
||||
"default_acceleration": "150",
|
||||
"outer_wall_acceleration": "100",
|
||||
"inner_wall_acceleration": "100",
|
||||
"travel_acceleration": "150",
|
||||
"internal_solid_infill_acceleration": "100",
|
||||
"sparse_infill_speed": "60",
|
||||
"skirt_distance": "5",
|
||||
"overhang_1_4_speed": "100",
|
||||
"overhang_2_4_speed": "100",
|
||||
"overhang_3_4_speed": "80",
|
||||
"overhang_4_4_speed": "50",
|
||||
"skirt_speed": "20",
|
||||
"wall_sequence": "inner-outer-inner wall",
|
||||
"enable_arc_fitting": "0",
|
||||
"initial_layer_min_bead_width": "100",
|
||||
"min_bead_width": "100",
|
||||
"elefant_foot_compensation": "0.15",
|
||||
"small_perimeter_speed": "50%",
|
||||
"overhang_speed_classic": "0",
|
||||
"internal_bridge_speed": "80%",
|
||||
"accel_to_decel_enable": "0",
|
||||
"filter_out_gap_fill": "0.5",
|
||||
"gcode_label_objects": "0",
|
||||
"slow_down_layers": "1",
|
||||
"wipe_speed": "200",
|
||||
"reduce_crossing_wall": "1",
|
||||
"max_travel_detour_distance": "50",
|
||||
"compatible_printers": [
|
||||
"Flashforge Artemis 0.4 Nozzle"
|
||||
],
|
||||
"filename_format": "{input_filename_base}.gcode",
|
||||
"post_process": ""
|
||||
}
|
||||
@@ -40,6 +40,10 @@
|
||||
"name": "fdm_filament_pa",
|
||||
"sub_path": "filament/base/fdm_filament_pa.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_paht",
|
||||
"sub_path": "filament/base/fdm_filament_paht.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_filament_pc",
|
||||
"sub_path": "filament/base/fdm_filament_pc.json"
|
||||
@@ -112,6 +116,10 @@
|
||||
"name": "COEX ABS PRIME @base",
|
||||
"sub_path": "filament/COEX/COEX ABS PRIME @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo ABS @base",
|
||||
"sub_path": "filament/Elegoo/Elegoo ABS @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Eolas Prints ABS @System",
|
||||
"sub_path": "filament/Eolas Prints/Eolas Prints ABS @System.json"
|
||||
@@ -256,6 +264,10 @@
|
||||
"name": "Generic PA-CF @System",
|
||||
"sub_path": "filament/Generic PA-CF @System.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PAHT @base",
|
||||
"sub_path": "filament/Elegoo/Elegoo PAHT @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Bambu PC @base",
|
||||
"sub_path": "filament/Bambu/Bambu PC @base.json"
|
||||
@@ -264,6 +276,10 @@
|
||||
"name": "Bambu PC FR @base",
|
||||
"sub_path": "filament/Bambu/Bambu PC FR @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PC @base",
|
||||
"sub_path": "filament/Elegoo/Elegoo PC @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Generic PC @System",
|
||||
"sub_path": "filament/Generic PC @System.json"
|
||||
@@ -317,8 +333,12 @@
|
||||
"sub_path": "filament/Elas/Elas PETG Basic @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG Pro @base",
|
||||
"sub_path": "filament/Elegoo/Elegoo PETG Pro @base.json"
|
||||
"name": "Elegoo PETG @base",
|
||||
"sub_path": "filament/Elegoo/Elegoo PETG @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG PRO @base",
|
||||
"sub_path": "filament/Elegoo/Elegoo PETG PRO @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG-CF @base",
|
||||
@@ -484,6 +504,18 @@
|
||||
"name": "Elegoo PLA @base",
|
||||
"sub_path": "filament/Elegoo/Elegoo PLA @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Matte @base",
|
||||
"sub_path": "filament/Elegoo/Elegoo PLA Matte @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA Silk @base",
|
||||
"sub_path": "filament/Elegoo/Elegoo PLA Silk @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PLA-CF @base",
|
||||
"sub_path": "filament/Elegoo/Elegoo PLA-CF @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo Rapid PLA+ @base",
|
||||
"sub_path": "filament/Elegoo/Elegoo Rapid PLA+ @base.json"
|
||||
@@ -808,6 +840,10 @@
|
||||
"name": "Elegoo TPU 95A @base",
|
||||
"sub_path": "filament/Elegoo/Elegoo TPU 95A @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo TPU @base",
|
||||
"sub_path": "filament/Elegoo/Elegoo TPU @base.json"
|
||||
},
|
||||
{
|
||||
"name": "Eolas Prints TPU D60 UV Resistant @System",
|
||||
"sub_path": "filament/Eolas Prints/Eolas Prints TPU Flex D60 UV Resistant @System.json"
|
||||
@@ -1009,8 +1045,8 @@
|
||||
"sub_path": "filament/Elas/Elas PETG Basic @System.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG Pro @System",
|
||||
"sub_path": "filament/Elegoo/Elegoo PETG Pro @System.json"
|
||||
"name": "Elegoo PETG PRO @System",
|
||||
"sub_path": "filament/Elegoo/Elegoo PETG PRO @System.json"
|
||||
},
|
||||
{
|
||||
"name": "Elegoo PETG-CF @System",
|
||||
|
||||
@@ -5,61 +5,13 @@
|
||||
"from": "system",
|
||||
"filament_id": "OGFE06",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"19.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.07"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260"
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"250"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"90"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"95"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"95"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"50"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -0,0 +1,10 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @System",
|
||||
"renamed_from": "Elegoo PETG Pro @System",
|
||||
"inherits": "Elegoo PETG PRO @base",
|
||||
"from": "system",
|
||||
"setting_id": "OGFSE02_00",
|
||||
"instantiation": "true",
|
||||
"compatible_printers": []
|
||||
}
|
||||
+55
-64
@@ -1,83 +1,74 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo RAPID PETG @base",
|
||||
"inherits": "fdm_elegoo_filament_pet",
|
||||
"name": "Elegoo PETG PRO @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "ERPETGB00",
|
||||
"filament_id": "OGFE02",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
"filament_cost": [
|
||||
"12.49"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
"filament_retraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"45"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"30"
|
||||
"20"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
"fan_cooling_layer_time": [
|
||||
"20"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
"10"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -1,7 +1,8 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG Pro @System",
|
||||
"inherits": "Elegoo PETG Pro @base",
|
||||
"name": "Elegoo PETG PRO @System",
|
||||
"renamed_from": "Elegoo PETG Pro @System",
|
||||
"inherits": "Elegoo PETG PRO @base",
|
||||
"from": "system",
|
||||
"setting_id": "OGFSE02_00",
|
||||
"instantiation": "true",
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG Pro @base",
|
||||
"name": "Elegoo PETG PRO @base",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"from": "system",
|
||||
"filament_id": "OGFE02",
|
||||
|
||||
@@ -6,45 +6,18 @@
|
||||
"filament_id": "OGFE04",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"15.99"
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
"1.25"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
"16"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
}
|
||||
+1
-1
@@ -1,7 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Matte @base",
|
||||
"inherits": "fdm_elegoo_filament_pla",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "EPLAMB00",
|
||||
"instantiation": "false",
|
||||
+1
-1
@@ -1,7 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA Silk @base",
|
||||
"inherits": "fdm_elegoo_filament_pla",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "EPLASB00",
|
||||
"instantiation": "false",
|
||||
+1
-1
@@ -1,7 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PLA-CF @base",
|
||||
"inherits": "fdm_elegoo_filament_pla",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"from": "system",
|
||||
"filament_id": "EPLACFB00",
|
||||
"instantiation": "false",
|
||||
+6
-36
@@ -5,46 +5,16 @@
|
||||
"from": "system",
|
||||
"filament_id": "OGFE05",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"15.99"
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"18"
|
||||
"1.25"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"215"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"210"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -5,64 +5,22 @@
|
||||
"from": "system",
|
||||
"filament_id": "OGFE07",
|
||||
"instantiation": "false",
|
||||
"filament_cost": [
|
||||
"19.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.5"
|
||||
"3.6"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.21"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"225"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"220"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"40"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"70"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"50"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.8"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"25"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"25"
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n"
|
||||
]
|
||||
}
|
||||
}
|
||||
+68
-60
@@ -1,75 +1,83 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Elegoo PETG PRO @base",
|
||||
"inherits": "fdm_elegoo_filament_pet",
|
||||
"name": "fdm_filament_paht",
|
||||
"inherits": "fdm_filament_common",
|
||||
"from": "system",
|
||||
"filament_id": "EPETGPROB00",
|
||||
"instantiation": "false",
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
"filament_max_volumetric_speed": [
|
||||
"12"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
"filament_type": [
|
||||
"PAHT"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_cost": [
|
||||
"0"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Elegoo"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
"60"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
"60"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"220"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"220"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"45"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"50"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; Filament start gcode\n"
|
||||
@@ -77,7 +85,7 @@
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
]
|
||||
}
|
||||
}
|
||||
@@ -454,6 +454,26 @@
|
||||
"name": "0.28 Extra Draft @Snapmaker U1 (0.4 nozzle)",
|
||||
"sub_path": "process/0.28 Extra Draft @Snapmaker U1 (0.4 nozzle).json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_U1_0.6_common",
|
||||
"sub_path": "process/fdm_process_U1_0.6_common.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20 Standard @Snapmaker U1 (0.6 nozzle)",
|
||||
"sub_path": "process/0.20 Standard @Snapmaker U1 (0.6 nozzle).json"
|
||||
},
|
||||
{
|
||||
"name": "0.30 Draft @Snapmaker U1 (0.6 nozzle)",
|
||||
"sub_path": "process/0.30 Draft @Snapmaker U1 (0.6 nozzle).json"
|
||||
},
|
||||
{
|
||||
"name": "0.40 Extra Draft @Snapmaker U1 (0.6 nozzle)",
|
||||
"sub_path": "process/0.40 Extra Draft @Snapmaker U1 (0.6 nozzle).json"
|
||||
},
|
||||
{
|
||||
"name": "0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle)",
|
||||
"sub_path": "process/0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle).json"
|
||||
},
|
||||
{
|
||||
"name": "0.06 Standard @Snapmaker Artisan (0.2 nozzle)",
|
||||
"sub_path": "process/0.06 Standard @Snapmaker Artisan (0.2 nozzle).json"
|
||||
@@ -1530,6 +1550,14 @@
|
||||
"name": "Snapmaker U1 (0.4 nozzle)",
|
||||
"sub_path": "machine/Snapmaker U1 (0.4 nozzle).json"
|
||||
},
|
||||
{
|
||||
"name": "Snapmaker U1 (0.6 nozzle)",
|
||||
"sub_path": "machine/Snapmaker U1 (0.6 nozzle).json"
|
||||
},
|
||||
{
|
||||
"name": "Snapmaker U1 (0.4+0.6 nozzle)",
|
||||
"sub_path": "machine/Snapmaker U1 (0.4+0.6 nozzle).json"
|
||||
},
|
||||
{
|
||||
"name": "Snapmaker A250 BKit (0.2 nozzle)",
|
||||
"sub_path": "machine/Snapmaker A250 BKit (0.2 nozzle).json"
|
||||
|
||||
@@ -29,6 +29,38 @@
|
||||
"0"
|
||||
],
|
||||
"machine_end_gcode": " PRINT_END\nTIMELAPSE_STOP",
|
||||
"machine_max_acceleration_extruding": [
|
||||
"25000",
|
||||
"25000"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"25000",
|
||||
"25000"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"25000",
|
||||
"25000"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"25000",
|
||||
"25000"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"500",
|
||||
"200"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"9",
|
||||
"9"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"3",
|
||||
"0.4"
|
||||
@@ -37,10 +69,21 @@
|
||||
"30",
|
||||
"25"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"1000",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"1000",
|
||||
"200"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"20",
|
||||
"12"
|
||||
],
|
||||
"resonance_avoidance": "1",
|
||||
"min_resonance_avoidance_speed": "40",
|
||||
"max_resonance_avoidance_speed": "90",
|
||||
"machine_start_gcode": "SET_PRINT_AUTO_BED_LEVELING ENABLE=1\nSET_TIME_LAPSE_CAMERA ENABLE=1\n;===== date: 20251222 =====================\n\nPRINT_START\nDEFECT_DETECTION_START\nSET_PRINT_STATS_INFO TOTAL_LAYER={total_layer_count}\nSET_PRINT_STATS_INFO CURRENT_LAYER=0\nTIMELAPSE_START\nM140 S{bed_temperature_initial_layer_single}\nM104 T{initial_extruder} S140\nM204 S10000\n\nG28 X Y\n;===== 床面异物检测 ========\nT{initial_extruder}\nG90\nDEFECT_DETECTION_DETECT_BED\n;===== 取放头检测 =================\nSM_PRINT_CHECK_SWITCH_EXTRUDER\n\n;===== 自动进料 & 挤出流量 & 预挤出 ======================\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=1 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=0\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=0\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=2 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=1\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=1\nSM_PRINT_EXTRUDER_PREHEAT EXTRUDER=3 TEMP=140\nSM_PRINT_AUTO_FEED EXTRUDER=2\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=2\nSM_PRINT_AUTO_FEED EXTRUDER=3\nSM_PRINT_FLOW_CALIBRATE EXTRUDER=3\nM104 S0 T0 A0\nM104 S0 T1 A0\nM104 S0 T2 A0\nM104 S0 T3 A0\nM104 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\n\n;===== 粗回零 =================\nT{initial_extruder}\nM106 S255\nM106 P2 S0\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 T{initial_extruder} S{nozzle_temperature[initial_extruder] - 90}\nROUGHLY_CLEAN_NOZZLE_WITH_DISCARD\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nG28 Z I140 J140\n\n;===== 检测钢板 =================\nDETECT_BED_PLATE\n\n;===== 深度清洁喷嘴 =================\nG90\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nM109 S{nozzle_temperature[initial_extruder] - 50}\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_1\nM104 S{nozzle_temperature[initial_extruder] - 90}\nG0 Z5 F10000\nMOVE_TO_DISCARD_FILAMENT_POSITION\nROUGHLY_CLEAN_NOZZLE\nMOVE_TO_XY_IDLE_POSITION_EXTRUDER\nFINELY_CLEAN_NOZZLE_STAGE_2\n\n;===== 精回零 =================\nM106 S255\nM109 S{nozzle_temperature[initial_extruder] - 90}\nM190 S{bed_temperature_initial_layer_single}\nM107 P2\nG90\nG0 Z5 F10000\nG28 Z\n\n;===== 热床调平 =================\n; Always pass `ADAPTIVE_MARGIN=0` because Orca has already handled `adaptive_bed_mesh_margin` internally\n; Make sure to set ADAPTIVE to 0 otherwise Klipper will use it's own adaptive bed mesh logic\nBED_MESH_CALIBRATE mesh_min={adaptive_bed_mesh_min[0]},{adaptive_bed_mesh_min[1]} mesh_max={adaptive_bed_mesh_max[0]},{adaptive_bed_mesh_max[1]} ALGORITHM=[bed_mesh_algo] PROBE_COUNT={bed_mesh_probe_count[0]},{bed_mesh_probe_count[1]} ADAPTIVE=0 ADAPTIVE_MARGIN=0\n; Original upstream: BED_MESH_CALIBRATE PROBE_COUNT=11,11\n\n;===== 画起始线 =================\nG90\nG1 Z1.5\nG0 X10 Y3 Z2 F18000\nM109 S{nozzle_temperature_initial_layer[initial_extruder]}\nG1 Z0.2\nM83\nG1 X110 E15 F360\nG1 Z1.5\n\nG90\nM106 S0",
|
||||
"machine_tool_change_time": "5",
|
||||
"max_layer_height": [
|
||||
@@ -180,8 +223,9 @@
|
||||
"Auto Lift"
|
||||
],
|
||||
"enable_filament_ramming": "0",
|
||||
"extruder_clearance_height_to_rod": "27.5",
|
||||
"extruder_clearance_radius": "72.5",
|
||||
"extruder_clearance_height_to_rod": "60",
|
||||
"extruder_clearance_height_to_lid": "130",
|
||||
"extruder_clearance_radius": "80",
|
||||
"machine_load_filament_time": "0",
|
||||
"machine_unload_filament_time": "0",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\nTIMELAPSE_TAKE_FRAME\nDEFECT_DETECTION_DETECT",
|
||||
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "SM_U1_04_06",
|
||||
"name": "Snapmaker U1 (0.4+0.6 nozzle)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_U1",
|
||||
"printer_model": "Snapmaker U1",
|
||||
"printer_variant": "0.4+0.6",
|
||||
"default_print_profile": "0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle)",
|
||||
"max_layer_height": [
|
||||
"0.32",
|
||||
"0.32",
|
||||
"0.48",
|
||||
"0.48"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.08",
|
||||
"0.08",
|
||||
"0.12",
|
||||
"0.12"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"nozzle_type": "stainless_steel"
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"setting_id": "SM_U1_06",
|
||||
"name": "Snapmaker U1 (0.6 nozzle)",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_U1",
|
||||
"printer_model": "Snapmaker U1",
|
||||
"printer_variant": "0.6",
|
||||
"default_print_profile": "0.20 Standard @Snapmaker U1 (0.6 nozzle)",
|
||||
"max_layer_height": [
|
||||
"0.48",
|
||||
"0.48",
|
||||
"0.48",
|
||||
"0.48"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12",
|
||||
"0.12",
|
||||
"0.12",
|
||||
"0.12"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.6",
|
||||
"0.6",
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"nozzle_type": "stainless_steel"
|
||||
}
|
||||
@@ -7,5 +7,5 @@
|
||||
"model_id": "797581801",
|
||||
"bed_model": "Snapmaker U1_bed.stl",
|
||||
"bed_texture": "Snapmaker U1_texture.svg",
|
||||
"nozzle_diameter": "0.4"
|
||||
}
|
||||
"nozzle_diameter": "0.4;0.4+0.6;0.6"
|
||||
}
|
||||
|
||||
+32
@@ -0,0 +1,32 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20 Standard @Snapmaker U1 (0.4+0.6 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP004_0406_020",
|
||||
"instantiation": "true",
|
||||
"description": "Standard profile for the Snapmaker U1 mixed-nozzle configuration (T0/T1 = 0.4 mm, T2/T3 = 0.6 mm). Line widths are expressed as percentages of nozzle diameter so they scale correctly per tool. Use T0/T1 for detail work and outer walls; use T2/T3 for fast infill or large structural features.",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.4+0.6 nozzle)"
|
||||
],
|
||||
"line_width": "105%",
|
||||
"outer_wall_line_width": "105%",
|
||||
"inner_wall_line_width": "112%",
|
||||
"initial_layer_line_width": "125%",
|
||||
"sparse_infill_line_width": "105%",
|
||||
"internal_solid_infill_line_width": "105%",
|
||||
"support_line_width": "105%",
|
||||
"top_surface_line_width": "105%",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"ooze_prevention": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"wipe_tower_filament": "0",
|
||||
"preheat_time": "30",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"prime_tower_brim_width": "5",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"top_shell_layers": "5",
|
||||
"bottom_shell_layers": "3"
|
||||
}
|
||||
@@ -0,0 +1,25 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20 Standard @Snapmaker U1 (0.6 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.6_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004_06_020",
|
||||
"instantiation": "true",
|
||||
"description": "Standard 0.2 mm layer height profile for the Snapmaker U1 with 0.6 mm nozzles. Balances print speed and surface quality for everyday prints.",
|
||||
"layer_height": "0.20",
|
||||
"smooth_coefficient": "150",
|
||||
"overhang_totally_speed": "50",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"ooze_prevention": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"wipe_tower_filament": "0",
|
||||
"preheat_time": "30",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"prime_tower_brim_width": "5",
|
||||
"initial_layer_print_height": "0.25",
|
||||
"top_shell_layers": "4",
|
||||
"bottom_shell_layers": "3"
|
||||
}
|
||||
@@ -0,0 +1,29 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30 Draft @Snapmaker U1 (0.6 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.6_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004_06_030",
|
||||
"instantiation": "true",
|
||||
"description": "Fast draft profile for the Snapmaker U1 with 0.6 mm nozzles. 0.3 mm layer height for quick prototypes and functional parts.",
|
||||
"layer_height": "0.30",
|
||||
"smooth_coefficient": "80",
|
||||
"overhang_totally_speed": "40",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"ooze_prevention": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"wipe_tower_filament": "0",
|
||||
"preheat_time": "30",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"prime_tower_brim_width": "5",
|
||||
"initial_layer_print_height": "0.30",
|
||||
"top_shell_layers": "3",
|
||||
"bottom_shell_layers": "3",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "330",
|
||||
"sparse_infill_speed": "300",
|
||||
"internal_solid_infill_speed": "280"
|
||||
}
|
||||
@@ -0,0 +1,30 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.40 Extra Draft @Snapmaker U1 (0.6 nozzle)",
|
||||
"inherits": "fdm_process_U1_0.6_common",
|
||||
"from": "system",
|
||||
"setting_id": "GP004_06_040",
|
||||
"instantiation": "true",
|
||||
"description": "Maximum-speed profile for the Snapmaker U1 with 0.6 mm nozzles. 0.4 mm layer height for rapid prototyping where surface finish is not critical.",
|
||||
"layer_height": "0.40",
|
||||
"smooth_coefficient": "80",
|
||||
"overhang_totally_speed": "30",
|
||||
"compatible_printers": [
|
||||
"Snapmaker U1 (0.6 nozzle)"
|
||||
],
|
||||
"ooze_prevention": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"standby_temperature_delta": "-150",
|
||||
"wipe_tower_filament": "0",
|
||||
"preheat_time": "30",
|
||||
"wipe_tower_cone_angle": "15",
|
||||
"prime_tower_brim_width": "5",
|
||||
"initial_layer_print_height": "0.35",
|
||||
"top_shell_layers": "3",
|
||||
"bottom_shell_layers": "3",
|
||||
"outer_wall_speed": "220",
|
||||
"inner_wall_speed": "330",
|
||||
"sparse_infill_speed": "320",
|
||||
"internal_solid_infill_speed": "300",
|
||||
"wall_loops": "2"
|
||||
}
|
||||
@@ -0,0 +1,16 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_U1_0.6_common",
|
||||
"inherits": "fdm_process_U1_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"line_width": "0.62",
|
||||
"outer_wall_line_width": "0.62",
|
||||
"inner_wall_line_width": "0.62",
|
||||
"initial_layer_line_width": "0.72",
|
||||
"sparse_infill_line_width": "0.62",
|
||||
"internal_solid_infill_line_width": "0.62",
|
||||
"support_line_width": "0.62",
|
||||
"top_surface_line_width": "0.62",
|
||||
"compatible_printers": []
|
||||
}
|
||||
@@ -30,7 +30,21 @@ void GCodeWriter::apply_print_config(const PrintConfig &print_config)
|
||||
m_single_extruder_multi_material = print_config.single_extruder_multi_material.value;
|
||||
bool use_mach_limits = print_config.gcode_flavor.value == gcfMarlinLegacy || print_config.gcode_flavor.value == gcfMarlinFirmware ||
|
||||
print_config.gcode_flavor.value == gcfKlipper || print_config.gcode_flavor.value == gcfRepRapFirmware;
|
||||
m_max_acceleration = std::lrint(use_mach_limits ? print_config.machine_max_acceleration_extruding.values.front() : 0);
|
||||
if (use_mach_limits) {
|
||||
// For Klipper, SET_VELOCITY_LIMIT ACCEL= applies to all moves, so the effective cap
|
||||
// is the minimum of the extruding limit and the per-axis X/Y limits.
|
||||
// This ensures user-configured Motion Ability limits are honoured (#12244).
|
||||
unsigned int extruding_limit = std::lrint(print_config.machine_max_acceleration_extruding.values.front());
|
||||
if (print_config.gcode_flavor.value == gcfKlipper) {
|
||||
unsigned int x_limit = std::lrint(print_config.machine_max_acceleration_x.values.front());
|
||||
unsigned int y_limit = std::lrint(print_config.machine_max_acceleration_y.values.front());
|
||||
if (x_limit > 0) extruding_limit = std::min(extruding_limit, x_limit);
|
||||
if (y_limit > 0) extruding_limit = std::min(extruding_limit, y_limit);
|
||||
}
|
||||
m_max_acceleration = extruding_limit;
|
||||
} else {
|
||||
m_max_acceleration = 0;
|
||||
}
|
||||
m_max_travel_acceleration = static_cast<unsigned int>(
|
||||
std::round((use_mach_limits && supports_separate_travel_acceleration(print_config.gcode_flavor.value)) ?
|
||||
print_config.machine_max_acceleration_travel.values.front() :
|
||||
|
||||
@@ -1471,7 +1471,7 @@ void GLVolumeCollection::update_colors_by_extruder(const DynamicPrintConfig *con
|
||||
using ColorItem = std::pair<std::string, ColorRGBA>;
|
||||
std::vector<ColorItem> colors;
|
||||
|
||||
if (static_cast<PrinterTechnology>(config->opt_int("printer_technology")) == ptSLA) {
|
||||
if (config->has("printer_technology") && static_cast<PrinterTechnology>(config->opt_int("printer_technology")) == ptSLA) {
|
||||
const std::string& txt_color = config->opt_string("material_colour").empty() ?
|
||||
print_config_def.get("material_colour")->get_default_value<ConfigOptionString>()->value :
|
||||
config->opt_string("material_colour");
|
||||
@@ -1480,6 +1480,9 @@ void GLVolumeCollection::update_colors_by_extruder(const DynamicPrintConfig *con
|
||||
colors.push_back({ txt_color, rgba });
|
||||
}
|
||||
else {
|
||||
if (!config->has("filament_colour")) {
|
||||
return;
|
||||
}
|
||||
const ConfigOptionStrings* filamemts_opt = dynamic_cast<const ConfigOptionStrings*>(config->option("filament_colour"));
|
||||
if (filamemts_opt == nullptr)
|
||||
return;
|
||||
|
||||
@@ -109,7 +109,7 @@ static const std::unordered_map<std::string, std::vector<std::string>> printer_m
|
||||
"Elegoo Neptune 3 Max", "Elegoo Neptune 4 Pro", "Elegoo Neptune 4", "Elegoo Neptune 4 Max", "Elegoo Neptune 4 Plus",
|
||||
"Elegoo OrangeStorm Giga"}},
|
||||
{"Flashforge", {"Flashforge Adventurer 5M", "Flashforge Adventurer 5M Pro", "Flashforge AD5X", "Flashforge Adventurer 3 Series", "Flashforge Adventurer 4 Series",
|
||||
"Flashforge Guider 3 Ultra", "Flashforge Guider 2s"}},
|
||||
"Flashforge Guider 3 Ultra", "Flashforge Guider 2s", "Flashforge Artemis"}},
|
||||
{"FLSun", {"FLSun Q5", "FLSun QQ-S Pro", "FLSun Super Racer (SR)", "FLSun V400", "FLSun T1",
|
||||
"FLSun S1"}},
|
||||
{"FlyingBear", {"FlyingBear Reborn3", "FlyingBear S1", "FlyingBear Ghost 6"}},
|
||||
|
||||
@@ -46,6 +46,14 @@ bool try_pop_up_before_slice(bool is_slice_all, Plater* plater_ref, PartPlate* p
|
||||
if (nozzle_diameters->size() <= 1)
|
||||
return true;
|
||||
|
||||
// The filament-grouping dialog is specifically designed for BBL dual-nozzle printers
|
||||
// (e.g. H2D) where filaments must be assigned to a left or right nozzle.
|
||||
// For toolchangers (≥3 tools) and all non-BBL printers the dialog is irrelevant and
|
||||
// confusing; skip it entirely so slicing proceeds without interruption. (#12390)
|
||||
PresetBundle* preset = wxGetApp().preset_bundle;
|
||||
if (!preset || !preset->is_bbl_vendor() || nozzle_diameters->size() != 2)
|
||||
return true;
|
||||
|
||||
bool sync_plate = true;
|
||||
|
||||
std::vector<std::string> filament_colors = full_config.option<ConfigOptionStrings>("filament_colour")->values;
|
||||
|
||||
@@ -9715,7 +9715,9 @@ void GLCanvas3D::_set_warning_notification(EWarning warning, bool state)
|
||||
wxString region = L"en";
|
||||
if (language.find("zh") == 0)
|
||||
region = L"zh";
|
||||
wxGetApp().open_browser_with_warning_dialog(wxString::Format(L"https://wiki.bambulab.com/%s/filament-acc/filament/h2d-pla-and-petg-mutual-support", region));
|
||||
// Use the generic dual-nozzle PLA+PETG guide rather than the H2D-specific page
|
||||
// so the link is relevant for all dual-extrusion printers, not just Bambu H2D. (#12073)
|
||||
wxGetApp().open_browser_with_warning_dialog(wxString::Format(L"https://wiki.bambulab.com/%s/filament-acc/filament/pla-and-petg-dual-extrusion", region));
|
||||
return false;
|
||||
});
|
||||
}
|
||||
|
||||
@@ -3261,8 +3261,8 @@ void MainFrame::init_menubar_as_editor()
|
||||
[this]() {return m_plater->is_view3D_shown();; }, this);
|
||||
m_topbar->GetCalibMenu()->AppendSubMenu(flowrate_menu, _L("Flow ratio"));
|
||||
|
||||
// Retraction test
|
||||
append_menu_item(m_topbar->GetCalibMenu(), wxID_ANY, _L("Retraction test"), _L("Retraction test"),
|
||||
// Retraction
|
||||
append_menu_item(m_topbar->GetCalibMenu(), wxID_ANY, _L("Retraction"), _L("Retraction"),
|
||||
[this](wxCommandEvent&) {
|
||||
if (!m_retraction_calib_dlg)
|
||||
m_retraction_calib_dlg = new Retraction_Test_Dlg((wxWindow*)this, wxID_ANY, m_plater);
|
||||
@@ -3311,16 +3311,9 @@ void MainFrame::init_menubar_as_editor()
|
||||
[this]() {return m_plater->is_view3D_shown();; }, this);
|
||||
|
||||
// help
|
||||
append_menu_item(m_topbar->GetCalibMenu(), wxID_ANY, _L("Tutorial"), _L("Calibration help"),
|
||||
[this](wxCommandEvent&) {
|
||||
std::string url = "https://www.orcaslicer.com/wiki/Calibration";
|
||||
if (const std::string country_code = wxGetApp().app_config->get_country_code(); country_code == "CN") {
|
||||
// Use gitee mirror for China users
|
||||
url = "https://gitee.com/n0isyfox/orca-slicer-docs/wikis/%E6%A0%A1%E5%87%86/%E6%89%93%E5%8D%B0%E5%8F%82%E6%95%B0%E6%A0%A1%E5%87%86";
|
||||
}
|
||||
wxLaunchDefaultBrowser(url, wxBROWSER_NEW_WINDOW);
|
||||
}, "", nullptr,
|
||||
[this]() {return m_plater->is_view3D_shown();; }, this);
|
||||
append_menu_item(m_topbar->GetCalibMenu(), wxID_ANY, _L("Calibration Guide"), _L("Calibration Guide"), [this](wxCommandEvent &)
|
||||
{ wxLaunchDefaultBrowser("https://www.orcaslicer.com/wiki/calibration_guide", wxBROWSER_NEW_WINDOW); }, "", nullptr, [this]()
|
||||
{return m_plater->is_view3D_shown();; }, this);
|
||||
|
||||
#else
|
||||
m_menubar->Append(fileMenu, wxString::Format("&%s", _L("File")));
|
||||
@@ -3379,8 +3372,8 @@ void MainFrame::init_menubar_as_editor()
|
||||
[this](wxCommandEvent&) { if (m_plater) m_plater->calib_flowrate(true, 2); }, "", nullptr,
|
||||
[this]() {return m_plater->is_view3D_shown();; }, this);
|
||||
|
||||
// Retraction test
|
||||
append_menu_item(calib_menu, wxID_ANY, _L("Retraction test"), _L("Retraction test"),
|
||||
// Retraction
|
||||
append_menu_item(calib_menu, wxID_ANY, _L("Retraction"), _L("Retraction"),
|
||||
[this](wxCommandEvent&) {
|
||||
if (!m_retraction_calib_dlg)
|
||||
m_retraction_calib_dlg = new Retraction_Test_Dlg((wxWindow*)this, wxID_ANY, m_plater);
|
||||
@@ -3428,8 +3421,8 @@ void MainFrame::init_menubar_as_editor()
|
||||
}, "", nullptr,
|
||||
[this]() {return m_plater->is_view3D_shown();; }, this);
|
||||
// help
|
||||
append_menu_item(calib_menu, wxID_ANY, _L("Tutorial"), _L("Calibration help"),
|
||||
[this](wxCommandEvent&) { wxLaunchDefaultBrowser("https://www.orcaslicer.com/wiki/Calibration", wxBROWSER_NEW_WINDOW); }, "", nullptr,
|
||||
append_menu_item(calib_menu, wxID_ANY, _L("Calibration Guide"), _L("Calibration Guide"),
|
||||
[this](wxCommandEvent&) { wxLaunchDefaultBrowser("https://www.orcaslicer.com/wiki/calibration_guide", wxBROWSER_NEW_WINDOW); }, "", nullptr,
|
||||
[this]() {return m_plater->is_view3D_shown();; }, this);
|
||||
|
||||
m_menubar->Append(calib_menu,wxString::Format("&%s", _L("Calibration")));
|
||||
|
||||
@@ -48,7 +48,7 @@ wxBoxSizer* ObjColorDialog::create_btn_sizer(long flags,bool exist_error)
|
||||
if (!exist_error) {
|
||||
btn_sizer->AddSpacer(FromDIP(25));
|
||||
auto *tips = new HyperLink(this, _L("Wiki Guide")); // ORCA
|
||||
tips->SetURL("https://www.orcaslicer.com/wiki/general-settings/import_export.html#obj");
|
||||
tips->SetURL("https://www.orcaslicer.com/wiki/import_export#obj");
|
||||
btn_sizer->Add(tips, 0, wxALIGN_LEFT | wxALIGN_CENTER_VERTICAL);
|
||||
}
|
||||
btn_sizer->AddStretchSpacer();
|
||||
|
||||
@@ -2393,26 +2393,59 @@ bool PartPlate::check_mixture_of_pla_and_petg(const DynamicPrintConfig &config)
|
||||
bool has_pla = false;
|
||||
bool has_petg = false;
|
||||
|
||||
std::vector<int> used_filaments = get_extruders(true); // 1 base
|
||||
// On a toolchanger (machine_tool_change_time > 0) each filament slot maps to a
|
||||
// separate physical nozzle: only one nozzle is ever mounted or heated at a time, so
|
||||
// there is no cross-nozzle contamination between PLA and PETG. Track which physical
|
||||
// nozzle each material is on; warn only when PLA and PETG would pass through the
|
||||
// *same* nozzle.
|
||||
//
|
||||
// NOTE: if MMU-on-toolchanger support is added (#10586), the nozzle-mapping logic
|
||||
// will need to be revisited because multiple filaments may then share one tool slot.
|
||||
bool is_toolchanger = false;
|
||||
auto *tool_change_time = config.option<ConfigOptionFloat>("machine_tool_change_time");
|
||||
if (tool_change_time && tool_change_time->value > 0)
|
||||
is_toolchanger = true;
|
||||
|
||||
// nozzle index → whether it carries PLA / PETG
|
||||
std::map<int, bool> nozzle_has_pla;
|
||||
std::map<int, bool> nozzle_has_petg;
|
||||
|
||||
std::vector<int> used_filaments = get_extruders(true); // 1-based
|
||||
if (!used_filaments.empty()) {
|
||||
const auto *filament_types = config.option<ConfigOptionStrings>("filament_type");
|
||||
for (auto filament_idx : used_filaments) {
|
||||
int filament_id = filament_idx - 1;
|
||||
if (filament_id < config.option<ConfigOptionStrings>("filament_type")->values.size()) {
|
||||
std::string filament_type = config.option<ConfigOptionStrings>("filament_type")->values.at(filament_id);
|
||||
if (filament_type == "PLA")
|
||||
int filament_id = filament_idx - 1;
|
||||
if (filament_id < (int)filament_types->values.size()) {
|
||||
const std::string &filament_type = filament_types->values[filament_id];
|
||||
if (filament_type == "PLA") {
|
||||
has_pla = true;
|
||||
if (filament_type == "PETG")
|
||||
nozzle_has_pla[filament_id] = true;
|
||||
}
|
||||
if (filament_type == "PETG") {
|
||||
has_petg = true;
|
||||
nozzle_has_petg[filament_id] = true;
|
||||
}
|
||||
} else {
|
||||
BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << " check error:array bound";
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
if (has_pla && has_petg)
|
||||
return false;
|
||||
if (!has_pla || !has_petg)
|
||||
return true; // no mixture — no warning
|
||||
|
||||
return true;
|
||||
if (is_toolchanger) {
|
||||
// Warn only if any single nozzle slot carries both PLA and PETG (e.g. future MMU
|
||||
// on toolchanger). On a pure toolchanger each slot is independent, so this loop
|
||||
// will never fire and the warning is correctly suppressed. (#12073)
|
||||
for (const auto &kv : nozzle_has_pla) {
|
||||
if (nozzle_has_petg.count(kv.first))
|
||||
return false; // same nozzle → warn
|
||||
}
|
||||
return true; // different nozzles → safe, no warning
|
||||
}
|
||||
|
||||
return false; // non-toolchanger with both PLA and PETG → warn
|
||||
}
|
||||
|
||||
bool PartPlate::check_mixture_filament_compatible(const DynamicPrintConfig &config, std::string &error_msg)
|
||||
|
||||
@@ -10457,7 +10457,7 @@ void Plater::priv::update_title_dirty_status()
|
||||
wxGetApp().mainframe->SetTitle(title);
|
||||
wxGetApp().mainframe->update_title_colour_after_set_title();
|
||||
#else
|
||||
wxGetApp().mainframe->SetTitle(title);
|
||||
wxGetApp().mainframe->SetTitle(title + " - OrcaSlicer");
|
||||
wxGetApp().mainframe->topbar()->SetTitle(title);
|
||||
#endif
|
||||
}
|
||||
@@ -12880,7 +12880,7 @@ void Plater::calib_max_vol_speed(const Calib_Params& params)
|
||||
|
||||
void Plater::calib_retraction(const Calib_Params& params)
|
||||
{
|
||||
const auto calib_retraction_name = wxString::Format(L"Retraction test");
|
||||
const auto calib_retraction_name = wxString::Format(L"Retraction");
|
||||
new_project(false, false, calib_retraction_name);
|
||||
wxGetApp().mainframe->select_tab(size_t(MainFrame::tp3DEditor));
|
||||
if (params.mode != CalibMode::Calib_Retraction_tower)
|
||||
|
||||
@@ -2369,9 +2369,9 @@ void TabPrint::build()
|
||||
optgroup->append_single_option_line("gap_fill_flow_ratio", "quality_settings_wall_and_surfaces#surface-flow-ratio");
|
||||
optgroup->append_single_option_line("support_flow_ratio", "quality_settings_wall_and_surfaces#surface-flow-ratio");
|
||||
optgroup->append_single_option_line("support_interface_flow_ratio", "quality_settings_wall_and_surfaces#surface-flow-ratio");
|
||||
optgroup->append_single_option_line("only_one_wall_first_layer", "quality_settings_wall_and_surfaces#only-one-wall");
|
||||
optgroup->append_single_option_line("only_one_wall_top", "quality_settings_wall_and_surfaces#only-one-wall");
|
||||
optgroup->append_single_option_line("min_width_top_surface", "quality_settings_wall_and_surfaces#threshold");
|
||||
optgroup->append_single_option_line("only_one_wall_first_layer", "quality_settings_wall_and_surfaces#only-one-wall");
|
||||
optgroup->append_single_option_line("reduce_crossing_wall", "quality_settings_wall_and_surfaces#avoid-crossing-walls");
|
||||
optgroup->append_single_option_line("max_travel_detour_distance", "quality_settings_wall_and_surfaces#max-detour-length");
|
||||
|
||||
|
||||
@@ -177,7 +177,7 @@ PA_Calibration_Dlg::PA_Calibration_Dlg(wxWindow* parent, wxWindowID id, Plater*
|
||||
auto dlg_btns = new DialogButtons(this, {"OK"});
|
||||
|
||||
auto bottom_sizer = new wxBoxSizer(wxHORIZONTAL);
|
||||
auto wiki = new HyperLink(this, _L("Wiki Guide"), "https://www.orcaslicer.com/wiki/pressure-advance-calib");
|
||||
auto wiki = new HyperLink(this, _L("Wiki Guide"), "https://www.orcaslicer.com/wiki/pressure_advance_calib");
|
||||
bottom_sizer->Add(wiki, 0, wxALIGN_CENTER_VERTICAL | wxLEFT, FromDIP(20));
|
||||
bottom_sizer->AddStretchSpacer();
|
||||
bottom_sizer->Add(dlg_btns, 0, wxEXPAND);
|
||||
@@ -396,7 +396,7 @@ Temp_Calibration_Dlg::Temp_Calibration_Dlg(wxWindow* parent, wxWindowID id, Plat
|
||||
auto dlg_btns = new DialogButtons(this, {"OK"});
|
||||
|
||||
auto bottom_sizer = new wxBoxSizer(wxHORIZONTAL);
|
||||
auto wiki = new HyperLink(this, _L("Wiki Guide"), "https://www.orcaslicer.com/wiki/temp-calib");
|
||||
auto wiki = new HyperLink(this, _L("Wiki Guide"), "https://www.orcaslicer.com/wiki/temp_calib");
|
||||
bottom_sizer->Add(wiki, 0, wxALIGN_CENTER_VERTICAL | wxLEFT, FromDIP(20));
|
||||
bottom_sizer->AddStretchSpacer();
|
||||
bottom_sizer->Add(dlg_btns, 0, wxEXPAND);
|
||||
@@ -577,7 +577,7 @@ MaxVolumetricSpeed_Test_Dlg::MaxVolumetricSpeed_Test_Dlg(wxWindow* parent, wxWin
|
||||
auto dlg_btns = new DialogButtons(this, {"OK"});
|
||||
|
||||
auto bottom_sizer = new wxBoxSizer(wxHORIZONTAL);
|
||||
auto wiki = new HyperLink(this, _L("Wiki Guide"), "https://www.orcaslicer.com/wiki/volumetric-speed-calib");
|
||||
auto wiki = new HyperLink(this, _L("Wiki Guide"), "https://www.orcaslicer.com/wiki/volumetric_speed_calib");
|
||||
bottom_sizer->Add(wiki, 0, wxALIGN_CENTER_VERTICAL | wxLEFT, FromDIP(20));
|
||||
bottom_sizer->AddStretchSpacer();
|
||||
bottom_sizer->Add(dlg_btns, 0, wxEXPAND);
|
||||
@@ -685,7 +685,7 @@ VFA_Test_Dlg::VFA_Test_Dlg(wxWindow* parent, wxWindowID id, Plater* plater)
|
||||
auto dlg_btns = new DialogButtons(this, {"OK"});
|
||||
|
||||
auto bottom_sizer = new wxBoxSizer(wxHORIZONTAL);
|
||||
auto wiki = new HyperLink(this, _L("Wiki Guide"), "https://www.orcaslicer.com/wiki/vfa-calib");
|
||||
auto wiki = new HyperLink(this, _L("Wiki Guide"), "https://www.orcaslicer.com/wiki/vfa_calib");
|
||||
bottom_sizer->Add(wiki, 0, wxALIGN_CENTER_VERTICAL | wxLEFT, FromDIP(20));
|
||||
bottom_sizer->AddStretchSpacer();
|
||||
bottom_sizer->Add(dlg_btns, 0, wxEXPAND);
|
||||
@@ -735,7 +735,7 @@ void VFA_Test_Dlg::on_dpi_changed(const wxRect& suggested_rect)
|
||||
//
|
||||
|
||||
Retraction_Test_Dlg::Retraction_Test_Dlg(wxWindow* parent, wxWindowID id, Plater* plater)
|
||||
: DPIDialog(parent, id, _L("Retraction test"), wxDefaultPosition, wxDefaultSize, wxDEFAULT_DIALOG_STYLE), m_plater(plater)
|
||||
: DPIDialog(parent, id, _L("Retraction"), wxDefaultPosition, wxDefaultSize, wxDEFAULT_DIALOG_STYLE), m_plater(plater)
|
||||
{
|
||||
SetBackgroundColour(*wxWHITE); // make sure background color set for dialog
|
||||
SetForegroundColour(wxColour("#363636"));
|
||||
@@ -794,7 +794,7 @@ Retraction_Test_Dlg::Retraction_Test_Dlg(wxWindow* parent, wxWindowID id, Plater
|
||||
auto dlg_btns = new DialogButtons(this, {"OK"});
|
||||
|
||||
auto bottom_sizer = new wxBoxSizer(wxHORIZONTAL);
|
||||
auto wiki = new HyperLink(this, _L("Wiki Guide"), "https://www.orcaslicer.com/wiki/retraction-calib");
|
||||
auto wiki = new HyperLink(this, _L("Wiki Guide"), "https://www.orcaslicer.com/wiki/retraction_calib");
|
||||
bottom_sizer->Add(wiki, 0, wxALIGN_CENTER_VERTICAL | wxLEFT, FromDIP(20));
|
||||
bottom_sizer->AddStretchSpacer();
|
||||
bottom_sizer->Add(dlg_btns, 0, wxEXPAND);
|
||||
@@ -974,7 +974,7 @@ Input_Shaping_Freq_Test_Dlg::Input_Shaping_Freq_Test_Dlg(wxWindow* parent, wxWin
|
||||
auto dlg_btns = new DialogButtons(this, {"OK"});
|
||||
|
||||
auto bottom_sizer = new wxBoxSizer(wxHORIZONTAL);
|
||||
auto wiki = new HyperLink(this, _L("Wiki Guide"), "https://www.orcaslicer.com/wiki/input-shaping-calib");
|
||||
auto wiki = new HyperLink(this, _L("Wiki Guide"), "https://www.orcaslicer.com/wiki/input_shaping_calib");
|
||||
bottom_sizer->Add(wiki, 0, wxALIGN_CENTER_VERTICAL | wxLEFT, FromDIP(20));
|
||||
bottom_sizer->AddStretchSpacer();
|
||||
bottom_sizer->Add(dlg_btns, 0, wxEXPAND);
|
||||
@@ -1173,7 +1173,7 @@ Input_Shaping_Damp_Test_Dlg::Input_Shaping_Damp_Test_Dlg(wxWindow* parent, wxWin
|
||||
auto dlg_btns = new DialogButtons(this, {"OK"});
|
||||
|
||||
auto bottom_sizer = new wxBoxSizer(wxHORIZONTAL);
|
||||
auto wiki = new HyperLink(this, _L("Wiki Guide"), "https://www.orcaslicer.com/wiki/input-shaping-calib");
|
||||
auto wiki = new HyperLink(this, _L("Wiki Guide"), "https://www.orcaslicer.com/wiki/input_shaping_calib");
|
||||
bottom_sizer->Add(wiki, 0, wxALIGN_CENTER_VERTICAL | wxLEFT, FromDIP(20));
|
||||
bottom_sizer->AddStretchSpacer();
|
||||
bottom_sizer->Add(dlg_btns, 0, wxEXPAND);
|
||||
@@ -1369,7 +1369,7 @@ Cornering_Test_Dlg::Cornering_Test_Dlg(wxWindow* parent, wxWindowID id, Plater*
|
||||
auto dlg_btns = new DialogButtons(this, {"OK"});
|
||||
|
||||
auto bottom_sizer = new wxBoxSizer(wxHORIZONTAL);
|
||||
auto wiki = new HyperLink(this, _L("Wiki Guide"), "https://www.orcaslicer.com/wiki/cornering-calib");
|
||||
auto wiki = new HyperLink(this, _L("Wiki Guide"), "https://www.orcaslicer.com/wiki/cornering_calib");
|
||||
bottom_sizer->Add(wiki, 0, wxALIGN_CENTER_VERTICAL | wxLEFT, FromDIP(20));
|
||||
bottom_sizer->AddStretchSpacer();
|
||||
bottom_sizer->Add(dlg_btns, 0, wxEXPAND);
|
||||
|
||||
Reference in New Issue
Block a user