The belt-printer branch is failing two profile gates. Both stem from the
three belt-only vendors (Custom's generic belt printer, IdeaFormer,
Printcepts) not existing upstream, so upstream maintenance passed them
by.
Slice check: 4 of 1015 printers failed - Custom's MyBeltPrinter 0.2/0.4/
0.6/0.8 nozzle all fell back to "Default Setting". No process profile in
the Custom vendor listed any MyBeltPrinter in compatible_printers, and
Custom's fdm_belt_common pointed default_print_profile at "0.20mm
Standard @System", which does not exist in that vendor's index, so the
generic belt printer had no usable process at all. This gap dates to
when MyBeltPrinter was added (2026-04-07); it only started failing now
because the slice-check job is newer than that.
Adds two process profiles modelled on the sibling @MyKlipper ones:
- 0.20mm Standard @MyBeltPrinter - 0.4/0.6/0.8 nozzles
- 0.12mm Fine @MyBeltPrinter - 0.2/0.4 nozzles
The split is forced by hardware: the 0.2 nozzle preset caps
max_layer_height at 0.16, so a single 0.20mm profile cannot legally
cover
it. fdm_belt_common now defaults to the standard profile and the 0.2
nozzle preset overrides to the fine one.
setting_id: 14 files failed the rules introduced in #14432. That
migration renumbered 7425 files across 61 vendors but skipped these
three, leaving BabyBelt Pro, IdeaFormer IR3 V2 and MyBeltPrinter
squatting the "G*" id space reserved for Bambu (GMPC0BBP01, GMIF001,
GM_BELT_00x) and four instantiated filament/process presets carrying no
setting_id at all. Regenerated with
scripts/assign_vendor_setting_ids.py.
Also repoints the identical dangling "0.20mm Standard @System" in
Printcepts' and IdeaFormer's fdm_belt_common at their own real process
profiles. That is a no-op today because both concrete printers override
it, but it is the same landmine that took out MyBeltPrinter.
Vendor index versions bumped so check_installed_vendor_profiles() will
re-install the corrected profiles over an existing install.
Note: changing a shipped preset's setting_id can orphan user presets
that reference it as base_id. #14432 accepted that tradeoff for 61
vendors; this keeps these three consistent with the rest.
Verified: orca_extra_profile_check.py reports 0 errors across 66 vendors
(was 14 files with errors), and OrcaSlicer_profile_validator -s slices
all 1015 printer presets successfully (was 4 failures).
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The belt-printer branch is failing two profile gates. Both stem from the
three belt-only vendors (Custom's generic belt printer, IdeaFormer,
Printcepts) not existing upstream, so upstream maintenance passed them by.
Slice check: 4 of 1015 printers failed - Custom's MyBeltPrinter 0.2/0.4/
0.6/0.8 nozzle all fell back to "Default Setting". No process profile in
the Custom vendor listed any MyBeltPrinter in compatible_printers, and
Custom's fdm_belt_common pointed default_print_profile at
"0.20mm Standard @System", which does not exist in that vendor's index,
so the generic belt printer had no usable process at all. This gap dates
to when MyBeltPrinter was added (2026-04-07); it only started failing now
because the slice-check job is newer than that.
Adds two process profiles modelled on the sibling @MyKlipper ones:
- 0.20mm Standard @MyBeltPrinter - 0.4/0.6/0.8 nozzles
- 0.12mm Fine @MyBeltPrinter - 0.2/0.4 nozzles
The split is forced by hardware: the 0.2 nozzle preset caps
max_layer_height at 0.16, so a single 0.20mm profile cannot legally cover
it. fdm_belt_common now defaults to the standard profile and the 0.2
nozzle preset overrides to the fine one.
setting_id: 14 files failed the rules introduced in #14432. That
migration renumbered 7425 files across 61 vendors but skipped these three,
leaving BabyBelt Pro, IdeaFormer IR3 V2 and MyBeltPrinter squatting the
"G*" id space reserved for Bambu (GMPC0BBP01, GMIF001, GM_BELT_00x) and
four instantiated filament/process presets carrying no setting_id at all.
Regenerated with scripts/assign_vendor_setting_ids.py.
Also repoints the identical dangling "0.20mm Standard @System" in
Printcepts' and IdeaFormer's fdm_belt_common at their own real process
profiles. That is a no-op today because both concrete printers override
it, but it is the same landmine that took out MyBeltPrinter.
Vendor index versions bumped so check_installed_vendor_profiles() will
re-install the corrected profiles over an existing install.
Note: changing a shipped preset's setting_id can orphan user presets that
reference it as base_id. #14432 accepted that tradeoff for 61 vendors;
this keeps these three consistent with the rest.
Verified: orca_extra_profile_check.py reports 0 errors across 66 vendors
(was 14 files with errors), and OrcaSlicer_profile_validator -s slices all
1015 printer presets successfully (was 4 failures).
* update snapmaker profiles. largely ported for Snapmaker Orca fork
* update prime volume
* set precise_outer_wall to 1
* Update per-material multi-tool ramming to the filament library
* Add per-filament overrides for toolchange retraction
* Set toolchange retraction per filament for Snapmaker U1
* set default support type to tree
* format snapmaker profiles
The linear approximation used a heuristic segment count clamped to 4..16, so the
lift ran as a coarse polygon. Every vertex is a direction change large enough to
hit the firmware's jerk limit, forcing a decelerate/accelerate at each corner —
the lift micro-stutters instead of running at speed. The segment count now comes
from the chord deviation against the slicing resolution, reusing
Geometry::ArcWelder::arc_discretization_steps, which keeps the turn at each
vertex shallow enough for the firmware to carry speed through the whole move.
Points are emitted through GCodeG1Formatter so they carry the same quantization
as the rest of the G-code, and the move comment now trails the feedrate line to
match _travel_to_z and the G2/G3 branch. No change when arc fitting is enabled.
* fix: make the error dialog caret point at the character it's blaming
Custom G-code parse errors print the offending line with a '^' under the
character that broke, positioned with spaces so it only lines up in a
fixed-width font. Since v2.3.2 these dialogs rendered entirely in the
proportional UI font, so the caret drifted left of its column and landed
on unrelated text.
Render only the code excerpts (the offending source line and its caret) in
the fixed-width face, leaving the surrounding prose in the UI font, and
reserve the horizontal scrollbar's height so a long line does not clip.
Rename the flag to has_code_excerpts to match what it now means.
Fixes#14869
* refactor(GUI): use <code> instead of <tt> for error excerpts
wxHTML maps <tt>, <code>, <kbd> and <samp> to the same fixed-width
handler, so this renders identically. <code> is the non-deprecated
tag and matches what the original code used.
* fix(GUI): align the error caret with real spaces, not
The caret line was padded with so its spaces would survive inline
HTML. wxHTML measures every glyph by its font extent, so where the fixed
font lacks a U+00A0 glyph the fallback renders it about twice as wide, and
the all- caret line outran the source, drifting the ^ to the right.
Wrap the excerpts in a small <excerpt> tag, registered on the dialog's own
parser, that switches on wxHTML literal-whitespace mode so the caret uses
real spaces that match the source column in any font. It sits inside <code>
for the fixed face; <pre> would do both but forces a blank line above it.
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
M620 is Bambu firmware dialect, not a
neutral command. Composing it in
MachineObject let non-Bambu agents
(Moonraker/Klipper) forward it and
report success on firmware that
cannot run it.
Agents now own the dialect: the
default refusal on IPrinterAgent
returns not-supported so the UI
can say so; BBLPrinterAgent keeps
the byte-identical composition.
Replace per-printer auto-activation
(is_current_printer_agent_plugin)
with a global experimental AppConfig
toggle, default off: legacy
print-host behavior is unchanged
until the user opts in. The toggle
drives device-tab routing, print
button defaults, connect-button
visibility and sidebar layout, and
dedups machine-select dialog opens.
set_live_printer_agent centralizes
the swap: deselect the machine,
clear stale sidebar state and the
previous agent's Other Devices, then
install the new agent (or null when
its provider vanished). Plugin
load/unload callbacks refresh the
dropdown and re-run agent selection.
load_last_machine no longer falls
back to the first available machine.
A dedicated PrinterAgentChoice field
reads rows straight from the live
agent registry and stores the agent
id string, replacing the fake-coEnum
index mapping. The field moves to
TabPrinter and registers with the
searcher so UnsavedChanges renders
it; the PhysicalPrinterDialog copy
and its update hook are removed
(#125). switch_printer_agent now
resolves ids via
resolve_printer_agent_id.
Replace per-printer auto-activation
(is_current_printer_agent_plugin)
with a global experimental AppConfig
toggle, default off: legacy
print-host behavior is unchanged
until the user opts in. The toggle
drives device-tab routing, print
button defaults, connect-button
visibility and sidebar layout, and
dedups machine-select dialog opens.
set_live_printer_agent centralizes
the swap: deselect the machine,
clear stale sidebar state and the
previous agent's Other Devices, then
install the new agent (or null when
its provider vanished). Plugin
load/unload callbacks refresh the
dropdown and re-run agent selection.
load_last_machine no longer falls
back to the first available machine.
A dedicated PrinterAgentChoice field
reads rows straight from the live
agent registry and stores the agent
id string, replacing the fake-coEnum
index mapping. The field moves to
TabPrinter and registers with the
searcher so UnsavedChanges renders
it; the PhysicalPrinterDialog copy
and its update hook are removed
(#125). switch_printer_agent now
resolves ids via
resolve_printer_agent_id.
test(libslic3r): replace the disabled convex_hull_2d test, closing #11269
The last "failing libslic3r test" from #11269 was the disabled
SCENARIO("2D convex hull of sinking object", "[3mf][.]") in test_3mf.cpp.
It checked ModelObject::convex_hull_2d for a sinking object against
PrusaSlicer's reference hull, but Orca's convex_hull_2d does not clip
geometry below the bed the way PrusaSlicer's its_convex_hull_2d_above does,
so the reference never matched. The test also wrote a debug mesh to a
hardcoded /tmp path and its comparison loop was inverted.
Remove it and add tests/libslic3r/test_model.cpp characterizing
convex_hull_2d on non-sinking transforms (identity and scale+offset),
where the projected footprint is unambiguous. Homed in a Model test file
since it exercises ModelObject, not 3MF.
* Fix gizmo being closed after releasing mouse outside the gizmo floating window
The left up event of a drag started on the gizmo floating window (e.g.
selecting text in an input field) and released over the bed was treated
as a click on the plate, which deselected the objects and closed the
active gizmo. Add the ignore_left_up guard to the plate select branch,
matching the deselect branch above.
Co-Authored-By: Claude <noreply@anthropic.com>
* Fix Emboss gizmo being closed after releasing mouse outside its floating window
The Emboss gizmo has its own close-on-click-away handler
(on_mouse_change_selection) that was not protected against left up events
originating from ImGui windows, so the gizmo was still closed when a drag
started on its floating window (e.g. selecting text in the input field)
ended over the 3D scene. Expose the canvas's ignore_left_up state to
gizmos and skip the close check for such releases.
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* imgui: Clamp mouse y-coordinate in multi-line click/drag to text bounds
In single-line mode, click and drag already clamped y to the line's
y-coordinate so the cursor would continue to follow the x-position when
the mouse went off the top or bottom of the text. Multi-line mode did
not clamp, so stb_text_locate_coord() would return 0 (above) or n
(below), snapping the cursor to the very start or end of text and
ignoring the x-coordinate entirely.
Now both modes walk the row layout to compute the top of the first row
(y_min) and bottom of the last row (y_max, minus half a line height to
add tolerance for rounding), then clamp y to that range before passing
it to stb_text_locate_coord(). This means dragging or clicking above
the text now places the cursor on the first line at the x-coordinate,
and dragging/clicking below places it on the last line at the
x-coordinate, matching the single-line precedent.
* Fix issue that cursor cannot be placed at the last empty line
BeltAffine activates the FirstLayerPlane evaluator unconditionally, so on a
non-belt printer on_first_layer(point) stopped agreeing with the legacy
slicing-layer-0 test. Every per-path first-layer call site in _extrude then
took the non-first-layer branch, and first-layer speeds were skipped: brim
came out at the volumetric fallback (24.6 mm/s) instead of initial_layer_speed
(10 mm/s). This is the shared speed path, so it affected all printers on this
branch, not just belt ones.
Auto resolves to BeltAffine only when belt_printer is set with a non-zero
slicing rotation, and to XY (evaluator inactive, legacy behaviour) otherwise --
exactly what the option's own description already promised.
Caught by "Brim uses first layer speed" (upstream #14616), which arrived with
the upstream merge; the bad default dates back to a9bae54f20 (#30). Verified
against a pristine upstream/main build, which passes the same test.
tests/fff_print: 100/100 test cases, 1085 assertions (was 99/100).
Both belt regression tests still pass, confirming Auto still resolves to
BeltAffine for belt printers.
Note: this changes a config default. Projects and profiles that stored
first_layer_plane explicitly are unaffected; those relying on the default will
now get correct first-layer speeds on non-belt printers, so their G-code
changes accordingly.
Processes a minimal belt start sequence through GCodeProcessor::process_buffer
and asserts the move preceding the first extrusion keeps its real Z, so it can
no longer back-transform to model Y~=0 and produce the phantom extrusion line.
Belt printers are non-Bambu, so the processor uses the compatible reserved
tags ("TYPE:"); the test sets s_IsBBLPrinter=false (saved/restored via an RAII
guard) to mirror the real printer. Proven to fail without the fix (the
prepare-stage move's Z is pinned to the first-layer height, 0 here) and pass
with it.
On a belt printer the sliced preview drew a stray extrusion-colored line
from Y~=0 to the model, rendered in the first extrusion role's color. It is
not a travel and does not occur on non-belt printers.
GCodeProcessor::store_move_vertex pins a move's stored Z to the first-layer
height during the start-G-code "prepare" stage. That is a harmless cosmetic
tidy-up on a normal printer, but on a belt printer the designed-view
back-transform couples machine Z into the rendered model Y (the belt tilt
mixes the height and belt-feed axes). Pinning Z back-transforms the last
prepare-stage move (the unretract before the first extrusion) to model
Y ~= 0, and libvgcode then draws a phantom extrusion segment from Y ~= 0 to
the first real toolpath.
Keep the real Z for belt printers (gated on belt_tilt_angle, parsed from the
G-code header before the body) so prepare-stage moves back-transform
correctly. Non-belt processing is byte-identical. The emitted G-code was
already correct; this is a preview-geometry fix.
Locks in the fix from the previous commit. A fresh BeltGCodeWriter has an
unestablished planar position (is_current_position_clear() == false) and its
m_pos.xy is the origin (0,0). With a pending NormalLift z-hop, travel_to_xyz
used to lift in place via _travel_to_z(), which in belt mode shears the origin
into a machine Y ~= the layer Z — a move far up the gantry.
The test configures an X-tilt 45 deg belt transform, defers a z-hop via
lazy_lift, travels to a near-belt first point (transformed gantry Y ~= 1mm),
and asserts no emitted move has Y anywhere near the layer Z. Verified to fail
without the fix (max emitted Y = 100.0 vs the destination's ~1.0) and pass with
it.
On a belt printer the first travel of the print emitted a bogus move to
the bed corner with the nozzle far up the gantry, e.g.
G1 X95 Y168.19 Z237.857 F12000
right after the first "; printing object" line. Y168 (≈ the layer Z)
is out of the gantry's range.
Root cause: the layer-change z-hop is deferred via lazy_lift and consumed
by the first BeltGCodeWriter::travel_to_xyz, whose NormalLift branch does a
separate lift-in-place via _travel_to_z(target.z()). On a normal printer
_travel_to_z emits a Z-only move, but in belt mode Z is coupled to Y/X, so
_travel_to_z re-emits the current m_pos through the belt shear. At print
start (and after custom gcode) m_pos.xy is still the uninitialised origin
(0,0), which the back-transform + axis-remap shear into machine
(X=bed_max, Y=layer_z) — the illegal move.
Guard the NormalLift branch on is_current_position_clear(), matching the
SlopeLift branch directly above it which already does so. When the position
isn't established there is nothing to lift over, and the xy_z_move that
follows travels straight to the destination with full XYZ, establishing the
correct position. Bookkeeping is unaffected: in this path m_lifted stays 0,
so no spurious restore move is produced.
Verified by re-slicing the repro project: the start-of-print move is now
G1 X44.946 Y.621 Z237.857 (straight to the first object point), no move
touches the bed-max X edge, and the max Y over the whole file is 62.8mm
(printable_height 100).
On Linux the bundled CPython silently links the system OpenSSL instead of
the one built in deps/, and the dependency build then fails:
install: cannot stat 'Modules/_ssl.cpython-312-x86_64-linux-gnu.so':
No such file or directory
The chain:
* OpenSSL's linux-x86_64 target sets multilib=64, so 'make install_sw'
installs the static libs to <prefix>/lib64 while every other dependency
in the prefix uses <prefix>/lib.
* CPython's --with-openssl=<dir> only ever emits -L<dir>/lib. It does not
look in lib64, so -lssl resolves to the system OpenSSL.
* gcc -shared does not error on unresolved symbols, so the link appears to
succeed. _ssl.c was compiled against the bundled 1.1.1w headers, which
map SSL_get1_peer_certificate onto the pre-3.0 SSL_get_peer_certificate
-- a symbol OpenSSL 3.x removed. The module then fails to import:
_ssl failed to import: undefined symbol: SSL_get_peer_certificate
Could not build the ssl module!
* With no _ssl built, 'make install' cannot stat it and the build stops.
Passing --libdir=lib keeps the prefix single-layout, so CPython's -L<dir>/lib
finds the bundled static libraries and links against the headers it was
compiled with.
CMake-based dependencies were unaffected throughout, because CMake's
FindOpenSSL searches lib64 on its own; only CPython's autoconf path is
sensitive to this.
Affects any distribution where OpenSSL selects the lib64 layout, which is the
Fedora, openSUSE and Arch families. Debian and Ubuntu are unaffected, which is
why CI has not seen it.
Verified on Arch (GCC 16.1.1, CMake 4.4.2): the dependency build completes and
the bundled interpreter reports the bundled OpenSSL rather than the system one:
$ deps/build/OrcaSlicer_dep/usr/local/libpython/bin/python3.12 \
-c 'import ssl; print(ssl.OPENSSL_VERSION)'
OpenSSL 1.1.1w 11 Sep 2023
Not verified on macOS or Windows. The flag is accepted by OpenSSL's Configure
on all platforms and Darwin targets do not set multilib, so it should be a
no-op there, but CI is the check.
Upstream retyped travel_speed and travel_speed_z to ConfigOptionFloatsNullable
and initial_layer_travel_speed to ConfigOptionFloatsOrPercentsNullable, so the
scalar .value / get_abs_value() accessors no longer compile. BeltGCodeWriter.cpp
is belt-only and merged without conflict, so this only surfaced at build time.
Index them the way the base GCodeWriter does -- .get_at(m_cached_extruder_idx)
and get_abs_value_at(..., m_cached_extruder_idx) -- keeping belt's per-point
first_layer_for_point test rather than the base class's m_is_first_layer.
m_cached_extruder_idx moves from private to the existing protected block that
already exposes writer state to subclasses, so the belt writer resolves the
per-extruder index identically to the base writer instead of guessing one.
Brings the belt-printer work up to date with 591 upstream commits.
Conflict resolutions (12 files, 42 hunks):
- GCode.cpp: adopted upstream's per-filament/per-nozzle config refactor
(get_filament_config_index, NOZZLE_CONFIG), the extracted
generate_timelapse_gcode + farthest-point timelapse, and the
ConfigOptionFloatsNullable calibration options. Re-applied the belt
hooks on top: init_belt_writer / axis remap / FirstLayerPlane setup,
on_set_origin, the belt-corrected calib_z for the volumetric speed
tower, and path_on_first_layer (belt's per-path first-layer test) in
place of upstream's layer-index on_first_layer() in the acceleration,
jerk and overhang-detection paths. Swept upstream's new m_writer.
uses to m_writer-> since belt holds the writer by unique_ptr.
- interpolate_value_across_layers: kept upstream's banded stepping and
belt's object-Z-span ratio; dropped upstream's duplicate ratio decl.
- Plater.cpp: took upstream's guarded add_model(...) early-returns and
the VFA vfa_layer_height plumbing; kept the belt temp-tower path,
_calib_apply_belt_mode and belt_calib_flip_ringing_tower. Dropped the
VFA "cut upper" block, superseded upstream by model scaling.
- Brim.cpp: upstream's ObjectInstanceID-keyed brimAreaMap, keeping the
belt early-return.
- 3DScene.cpp: kept both the belt build-plate tilt up_direction and
upstream's per-extruder printable-height shading.
- GCodeViewer.cpp: kept upstream's dim-previous-layers setup and belt's
exemption from the same-result early return.
- TreeSupport.cpp: upstream's >= 0 roof-layer fix inside belt's
belt-floor branch.
- calib.cpp / GCode.hpp / GCodeWriter.{cpp,hpp} / Print.hpp: upstream's
additions adapted to belt's pointer-held writer and helpers.
- Custom.json: kept profile version 02.04.00.03 (belt) over upstream's
02.04.00.01; both bumped from 02.04.00.00.
Building this tree needs the wxInspector dependency, which upstream
added in the interim (python3 and wxWidgets 3.3.2 were already present
in the shared deps prefix).
* Remove titlebar from splash screen on Wayland
* Broadly check for window decorations and added explanatory description
* Fixed hiding title bar on Wayland for all desktop environments
* Update format
---------
Co-authored-by: noisyfox <timemanager.rick@gmail.com>
* fixes: may be used uninitialized [-Wmaybe-uninitialized]
* fixes: arc_len_next may be used uninitialized [-Wmaybe-uninitialized]
* review result: reverts {} initializer with = to keep code style consistent
Ian Chua