prime_tower_skip_points was stubbed for Type2 towers: the wall call
hard-coded skip_points=false, the gap cutter received an empty vector,
and append_tcr2 never routed the entry travel. Now the toolchange entry
positions are precomputed from the finalized plan, the wall is cut open
at each entry, and the entry travel approaches around the tower bounding
box through the opening when it starts outside the tower. The geometry
helpers are re-synced with the BBL versions (add_extra_point guards,
per-point side selection). The cone wall keeps its separate path, where
the option stays inert.
Behavior change: non-BBL towers now honor the (default-on) checkbox with
gap walls and routed entries; with the option off the output is
unchanged, and the BBL tower path is untouched.
The rib tower is now always square (prime_tower_width is ignored, as the
GUI already implies), carries the rib origin offset like the BBL tower so
the rib tips sit inside the configured position, clamps the rib length to
the tower diagonal, and extends the ribs for short towers.
* fix: constrain PA_Line calibration bounding box to model geometry
- PA_Line bounding box now uses actual model convex hull for X constraint instead of full printable area
- Skip EXCLUDE_OBJECT_DEFINE for PA_Line mode (single object, no exclusion needed)
- Add tool config files to .gitignore
* modified: .gitignore
* fix: add gcode type annotations and fix box height in PA line calibration
- Label calibration segments with appropriate TYPE comments (Outer wall, Bottom surface, Top surface, Custom) for proper gcode processing
- Fix bounding box height calculation to account for z_offset
- Add LAYER_CHANGE and HEIGHT comments for multi-layer numbering display
* fix: lock PA_Line bounding box X to bed centre instead of model hull
* Added extra TYPE to ensure text/numbers/glyphs are labelled correctly
` gcode << ";TYPE:Outer wall\n"; `
* Remove hardcoded Perl path in OpenSSL.cmake
Remove hardcoded Perl path for Windows configuration.
* Add cross compilation support for Windows in OpenSSL.cmake
* Remove unnecessary blank line in OpenSSL.cmake
* Set perl config command back to variable
Accidentally uploaded version with hardcoded path for my local environment
* whitespace adjustment in previous
* removed personal .gitignore config
Remove specific files and directories from .gitignore.
* Fix box height parameter in DrawBoxOptArgs
Update DrawBoxOptArgs to use `m_height_layer` instead of `m_height_layer*2+z_offset`. This isn't a Z coordinate, it's a layer height
* Replace hardcoded extrusion type with call to `GCodeProcessor::reserved_tag` Etags
* Get pa_line bounding box from actual calibration variables
Updated calibration line bounding box calculation to use actual geometry for X bounds, using a fake call to generate the calibration pattern.
This will accurately get the size of the calibration pattern, massively reducing wasted time from bed mesh probing.
* Implement print_extents method in CalibPressureAdvanceLine
Add print_extents method to calculate bounding box extents based on bed dimensions.
* Declare print_extents method in CalibPressureAdvanceLine
Added print_extents method to return X-bounds of the pattern.
* Fixed whitespace issues
* Adjust print_extents to account for delta printers
Check if the printer is delta layout and adjust bed dimensions if so.
Used code from `CalibPressureAdvanceLine::generate_test`
* Added semicolons to reserved tags
Didn't realise etags wouldn't add semicolon - added these
* only include number list in bounding box if number list is used
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* avoid bounding box overflowing bed
* Tabs to spaces
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
Co-authored-by: Ian Bassi <ian.bassi@outlook.com>
Resolved 4 conflicts:
- PrintConfig.hpp / Preset.cpp: upstream restored calib_flowrate_topinfill_special_order
(removed in the prior merge, now re-added and re-registered); kept it alongside our
IMEX options (imex_parallel_mode, imex_head_filament_map).
- Plater.cpp: kept our <sstream> include plus upstream's <optional> and plugin includes.
- tests/fff_print/test_gcodewriter.cpp: both sides appended disjoint scenarios after a
shared base. Reconstructed as upstream's full file (base + its 3 toolchange/H2C
scenarios + the boost/filesystem include its helper needs) followed by our 10
set_pressure_advance / set_temperature scenarios. 22 scenarios total, no duplicates.
Resolved conflicts in PrintConfig.hpp and Preset.cpp. Both were adjacent to upstream's
removal of calib_flowrate_topinfill_special_order (superseded by the new
top/bottom_surface_fill_order options); took upstream's removal from the option class
and the print-options list while keeping our new IMEX options (imex_parallel_mode,
imex_head_filament_map) and the IMEX enums (ImexToolLayout, ImexVizTheme) alongside
upstream's new SurfaceFillOrder enum. The option remains in PrintConfig's legacy
ignore-set so old projects still load.
Conflicts were all co-located additions rather than design collisions:
- GCode.cpp: adopt upstream's toolchange(filament_id, nozzle_id) signature and
per-variant set_config_index() while keeping the IMEX bare-T<n> suppression;
rebase the second-layer temperature loop's non-IMEX branch onto upstream's
get_filament_config_index() resolution.
- Preset.cpp / PresetBundle.cpp / PrintConfig.cpp: keep both sides' option-list
and enum-map entries.
- GLCanvas3D.cpp: upstream's printable_heights argument plus the IMEX ghost pass.
- PartPlate.cpp: keep <set> (still used).
- test_gcodewriter.cpp / test_3mf.cpp: keep both sides' test cases.
Resolves two conflicts:
- GLCanvas3D.hpp: keep both the IMEX ghost render declarations and
upstream's _render_wireframe_overlay().
- test_gcodewriter.cpp: both sides appended test cases to the same
region; keep upstream's origin/machine-limit tests alongside the
pressure-advance and temperature scenarios.
A dual-nozzle H2C print with support filament hangs at its first nozzle
switch. The emitted file shows the change-filament block's M620 O ordinal
jumping from O1 straight to O230, plus a duplicate "M1020 S<n>" toolchange
command right after every change block. Two causes, fixed together because
they interlock (the ordinal check keys off the same toolchange detection
that suppresses the duplicate):
- append_tcr incremented m_toolchange_count once per prime-tower visit
(roughly once per layer), while the change-filament template only emits
its M620 O{toolchange_count + 1} line on real filament changes. With 229
change-less sparse tower layers below the first support layer, the first
real change reported ordinal 230. The counter now advances only when the
expanded change block really contains a toolchange command, and the
placeholder exposes the upcoming change's ordinal (count + 1). The
set_extruder path already counted per real change and is unchanged.
- toolchange_prefix() returned "M1020 S" for BBL printers, so the
custom_gcode_changes_tool() dedup could never match the stock profiles'
line-leading "T[next_filament_id] ..." commands and the writer's own
toolchange was appended after every change block on dual-extruder
machines. The prefix is now the plain "T" (the manual-filament-change tag
branch stays first), and the M1020 form moved into GCodeWriter::toolchange()
as an explicit branch that also carries the nozzle:
"M1020 S<filament> H<nozzle>". The nozzle parameter is signed on purpose:
the null-safe nozzle lookup legitimately yields -1, matching the stock
templates' own H-1 convention.
The prefix change also lets the CoolingBuffer recognize the change blocks'
T commands as tool boundaries on BBL printers (its per-filament attribution
previously keyed off the duplicate M1020, or nothing at all on
single-extruder models); its existing out-of-range guard ignores
T1000-class machine commands.
Verification: full suites green (libslic3r 48998 assertions / 169 cases;
fff_print 692 / 65 including three new scenarios - writer emission per
printer kind, dedup + ordinal progression on sequential prints, and a
prime-tower regression scenario verified to fail against the old per-visit
counting). Byte gate: 18 of 20 fixtures bit-identical; the sequential repro
differs by exactly its 3 removed duplicate M1020 lines, deterministic
across two runs. Reslicing the field project that exposed the hang yields
M620 O1 followed by a gapless O2..O59 and zero duplicate M1020 lines.
Co-authored-by: songwei.li <songwei.li@bambulab.com>
The time estimator's speed/acceleration limits were indexed by time
mode only, reading slot 0 of the per-(extruder x volume-type) arrays
the multi-extruder profiles already carry (H2C 0.4: 8 entries, H2D
0.4: 10). Every move was therefore modelled with the first machine
slot's limits regardless of which nozzle variant was printing -
estimation fidelity only, since emitted feedrates/accelerations are
decided on the slicing side.
Now the estimator resolves the machine slot of the nozzle currently
mounted in the active extruder: the nozzle grouping context is handed
to the processor BEFORE the streaming replay (new member + setter -
deliberately separate from the post-stream result-field handover that
gates the richer change-time model, whose timing is unchanged), the
occupancy recorder is populated on every filament change (bookkeeping
decoupled from the gated time model; recorder writes have no time
effect), and get_machine_config_idx maps (volume type x extruder type
x extruder) to the slot via the printer's variant layout, newly
carried on the processor result. The feedrate/acceleration getters
gain a slot parameter indexing [slot*2 + mode]; jerk and the
print/travel/retract accelerations stay mode-only. Reloaded sliced
projects re-estimate with the result's saved grouping context;
imported bare g-code degrades to slot 0 - the historical read.
M201/M203 write the parsed value into EVERY slot's mode entry (a
firmware envelope change is global), which keeps per-slot reads in
lockstep with the mode-only reads they replace: the fleet emits
envelope lines before any motion, so estimates - hence the estimated
time header, M73 lines, and every other byte - are unchanged (20/20
pinned-slice byte gate bit-identical, incl. the sequential repro
sliced twice). Fidelity improves where envelope emission is off or a
migrating per-layer plan moves filaments across variants.
Tests: a stub-driven processor case proving the slot follows the
active nozzle through the exact production path (T..H.. commands,
fallback recorder bookkeeping, 4x time ratio on the slow variant),
that emitted M201/M203 reach every slot, and that a missing context
degrades to slot 0. Suites green (libslic3r 48998/169, fff_print
667/62).
When a per-layer nozzle grouping migrates a filament across nozzle
variants, the write-back turns two groups of config arrays from
filament-indexed into column-indexed: the per-variant filament options
(one column per variant a filament uses) and the merged extruder
retract overrides (resized to the column count by apply_override).
Export-path readers that still indexed them with the raw filament id
read a neighbor's column for every filament ordered after a migrating
one: toolchange/standby temperatures (M104/M109), retraction lengths
and feedrates, wipe distance, z-hop types, air-filtration keys, and -
through the Extruder's cached flow term - the extrusion E of every
move.
Now every such read resolves its column through the existing
layer-aware resolver (get_filament_config_index ->
Print::get_filament_config_indx), which returns the raw filament id
whenever no per-layer grouping result is published, so static prints
are byte-inert by construction. The Extruder itself has no layer
knowledge, so it gains an injected config column (set_config_index,
default = filament id) that the generator refreshes at the only two
resolution-changing events - layer change and writer toolchange - and
that re-syncs the cached e_per_mm3 flow term. Old-filament reads
resolve at the current layer, which is safe because the per-layer maps
are gap-filled carry-forward. Whole-array placeholder copies
(toolchange temperature overrides) are rebuilt in filament order,
mirroring the existing per-variant placeholder remap. The resolvers
move to the public section so non-friend helpers (ooze prevention) can
resolve too.
Documented, deliberately unchanged: the wipe tower's per-filament
parameter rows (no layer dimension; tower x per-layer grouping is a
follow-up), travel_slope's physical-extruder read, estimator pre-heat
bookkeeping temps, and index-0 header diagnostics.
Verification: new Extruder column-injection scenario (defaults, column
follow + flow-cache rescale, filament-indexed reads unaffected, reset
semantics) and a migrating write-back case proving the column shift for
filaments ordered after a migrator and the resolver tracking it (11 +
14 assertions); suites green (libslic3r 48998/169, fff_print 655/61);
20/20 pinned-slice byte gate bit-identical (incl. sequential repro x2
deterministic).
Sequential (by-object) prints were incoherent with the per-layer filament
selector (enable_filament_dynamic_map): the by-object branch published a
static grouping while each per-object ToolOrdering independently ran the
dynamic planner from an empty nozzle status and wrote its own map to the
config (one write per object, last object wins). The exported toolchange
sequences then disagreed with the published result that drives the
per-layer maps, placeholders, and selector emission.
Now the by-object branch, when the selector is enabled, plans each unique
object once — threading the physical nozzle occupancy and the previous
object's last filament into the next plan — stitches the per-object
per-layer nozzle maps into one print-wide result (gap-filled by the new
normalize_nozzle_map_per_layer so any layer index resolves a filament's
nozzle consistently), publishes it, and writes the derived extruder map
back once. The plans are cached on the Print and g-code export consumes
the cache: the ToolOrdering seed changes the plan input (dontcare
assignment, first-layer reorder), so a fresh export-time construction
could re-plan differently from the published stitch. The per-object
dynamic write-back is gated off for sequential prints.
Every change is gated behind is_dynamic_group_reorder(); no profile sets
the flag, so the static fleet's instruction stream is unchanged (20/20
pinned-slice byte gate identical, incl. the by-object repro sliced twice).
Tests: normalize unit coverage (carry-forward, back-fill, ragged input),
stitched-blocks selector detection, and an end-to-end by-object selector
slice (apply -> process -> export) asserting the published stitched
result, one cached plan per object, the config write-back, and a clean
export. Suites green (libslic3r 48958/165, fff_print 633/60).
The Print-level LayeredNozzleGroupResult had a single producer, the
by-layer branch of ToolOrdering, which is gated to non-sequential prints.
The by-object branch in Print::process computed a grouping only in auto
map modes and never stored it, so a sequential slice exported with a null
group result: the per-nozzle placeholder tables came up empty and any
start g-code indexing nozzle_diameter_at_nozzle_id[] aborted with
"Indexing an empty vector variable". A prior by-layer slice masked the
bug by leaving its (never cleared) result on the Print.
Now the by-object branch runs get_recommended_filament_maps in every
static map mode (in manual modes the result mirrors the user's
assignment, deviations throw as in by-layer) and publishes it
print-wide. The config write-back stays gated to auto modes: in manual
modes it would only re-store the pre-slice values.
Regression test: a two-object by-object print must publish a non-null
group result and resolve nozzle_diameter_at_nozzle_id[] in start g-code
(both fail without the fix). Suites green (libslic3r 48929/162,
fff_print 633/60); 18-fixture byte gate identical; the by-object repro
project goes from the export error to valid g-code, determinism x2.
- the g-code writer tracks the current layer id and resolves
FILAMENT_CONFIG/NOZZLE_CONFIG (plus every non-macro variant lookup,
toolchange placeholder scalars, and the change-filament flush
overrides) through Print's per-filament, per-layer config-index
resolvers instead of the filament->extruder collapse
- update_layer_related_config refreshes the per-layer
extruder/volume/nozzle maps in the writer config;
update_placeholder_parser_with_variant_params remaps the
filament-variant arrays into filament-id space for custom g-code
(Orca's flush placeholder computation moves inside it)
- the engine's concrete per-filament volume assignment now merges into
the config write-back (the temporary hold from the producer commit
is lifted together with these consumers), and the background process
reads the computed volume map back to the plate
- append_full_config dumps the resolved filament_map_2 slots
- update_used_filament_values gains a bounds guard
- tests: per-filament Hybrid slot resolution + null-result fallback
Result: on a Hybrid extruder, each filament's features slice with its
assigned sub-nozzle's variant values (speeds, volumetric limits,
retraction). Verified on a 4-filament H2C Hybrid project: outer walls
split into three feedrate populations (30/50/200 mm/s), toolpath
geometry byte-identical, deterministic across repeated slices. All 18
non-Hybrid reference fixtures stay byte-identical except the
filament_map_2 header value now showing the real slot. Auto grouping
ties (multiple zero-flush perfect matchings) may pick a different
filament-to-nozzle isolation than other slicers; verified co-optimal.
GCode::extrude_support declared its per-path speed helper as a function-local
static lambda that captures `this` by reference. The closure is built once, on
the first extrude_support call, and reused for the rest of the process, so a
second G-code export in the same process runs the helper against a `this` from
the first export's stack frame, which has already returned.
The stale `this` flows through NOZZLE_CONFIG(...) -> cur_extruder_index() ->
GCodeWriter::filament(), reading a garbage current-extruder id and indexing
with it. It is silent whenever the reused stack still holds a usable pointer,
and an order-dependent SIGSEGV otherwise; AddressSanitizer reports it as a
stack-use-after-return in GCodeWriter::filament(). It is the only static
capturing lambda in libslic3r.
Drop static so the closure is rebuilt each call against the live frame. Add an
fff_print regression test that slices a support object twice in one process; it
fails without the fix (stack-use-after-return under ASan) and passes with it.
WipeTowerIntegration::append_tcr processed filament_end_gcode with only
layer_num in its placeholder config, so a filament_end_gcode referencing
{layer_z} could not be evaluated and slicing aborted. This affects any
multi-filament print that routes tool changes through the prime/wipe tower
(for example a support filament on a Bambu printer); the same macro works
in machine_end_gcode and on the non-wipe-tower set_extruder path, which
both define layer_z.
Set layer_z to tcr.print_z, the value this function already provides to its
change_filament_gcode and tcr_rotated_gcode placeholders.
Fixes#10119
Catches the iXex/IDEX branch up to upstream main (44 commits). One
content conflict resolved:
- src/libslic3r/Print.hpp: kept upstream's default-initialized
m_origin {0,0,0} alongside our m_imex_slice_offset member.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Catches the iXex/IDEX parallel-printing branch up to upstream main
(102 commits). Two content conflicts resolved:
- src/libslic3r/Preset.cpp: s_Preset_printer_options — kept upstream's
new "use_3mf" key and our iMEX printer-capability/mode keys.
- tests/fff_print/test_gcodewriter.cpp: upstream revived the disabled
suite (#14196), dropping the obsolete [.]-tagged lift() test and its
config_lift_unlift.ini; kept their set_speed + z_hop tests and appended
our 10 per-firmware set_pressure_advance/set_temperature scenarios.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
Refactor skirt and brim ownership and emission flow
Refactor skirt and brim generation around a common object/group
ownership model.
Skirts and brims are now emitted as a coordinated preamble
(skirt -> brim -> object) instead of being generated and emitted
through multiple independent code paths.
Changes:
- Fix repeated skirt emission caused by the previous skirt state
tracking logic.
- Restore local skirt/brim ordering for per-object skirts in
By Layer mode.
- Emit brims together with their owning object or object group.
- Handle combined brims independently from skirt grouping.
- Handle draft shields through the same ownership model as skirts.
- Fix draft shield generation when skirt height is zero.
- Generate draft shields after brim geometry is known, preventing
draft shields from overlapping brims.
- Reject unsafe grouped per-object skirt configurations in
By Object mode.
- Remove legacy skirt emission paths and state-management
workarounds.
Support brim generation remains unchanged.
Co-authored-by: SoftFever <softfeverever@gmail.com>
* feat: add support for 3MF file format in printer configurations and export options
* fix file extension
* enable 3mf for X Max 4
* disable use_3mf for X Plus 4
* Fixed an issue where `label_object_enabled` was not properly propagated to 3mf
* enable exclude object for Max 4
* remove hardcoded use 3mf for flashforge, move them to the new printer profiles config
* Fix null-deref and arranger bugs that gate headless slicing tests
export_gcode dereferenced a null result out-param, enum serialization
dereferenced a null keys_map, and get_arrange_polys left bed_idx unseeded so
the arranger dropped items. All only affect the headless test/CLI path.
* Fix the headless test harness and add G-code test helpers
Use the real arranger, fix temp-file handling with an RAII guard, and add
layers_with_role / max_z for inspecting sliced G-code.
* Re-enable the Model construction test
* Re-enable SupportMaterial tests and add an enforced-support test
* Re-enable and extend PrintObject layer-height and perimeter tests
* Re-enable Print skirt, brim, and solid-surface tests
* Re-enable and extend PrintGCode tests
Un-hide the basic scenario (dead-key fixes, reframes, trimmed trivia) and add
initial-layer-height, sequential-order, and null-result export tests.
* Re-enable and reframe the skirt/brim tests
Detect skirt/brim by G-code role comment instead of a sentinel speed, and
resolve the previously-unfinished skirt-enclosure test.
* Replace the stale lift()/unlift() test with a z_hop test
* Delete the stub and broken Flow tests
Ooze prevention currently treats every toolchange as a transition between
independent hotends — the OLD filament's extruder cools to a standby
temperature (via standby_temperature_delta or the filament's
idle_temperature) before the change, and the NEW filament's extruder
ramps back up afterward. This is correct for IDEX/toolchanger setups
where the parked nozzle would drip otherwise.
For AFC/MMU lane swaps where the SAME physical extruder stays selected
(only the loaded filament changes), the cool-down → re-heat round trip
is pointless: same nozzle, same heater, just a different filament feeding
it. In-print this costs 30+ seconds per lane swap, and the AFC tip-form
sequence ends up running on a cooling extruder.
Gate the pre_toolchange call on physical_extruder_map: when both the old
and new filament index map to the same physical extruder, skip the
standby cool-down. post_toolchange is left untouched — its M109 to the
new filament's print temp is still emitted, so per-lane temperature
differences (e.g. PLA → PETG on the same AFC manifold) are still handled.
Note on pem sizing: the guard requires physical_extruder_map to be sized
to the filament count for the per-filament lookup to succeed. The option's
registered default is a single-entry [0], which is shorter than the filament
count on any multi-filament setup, so the bounds check fails and ooze runs
as before. The fix fires only on profiles that explicitly author pem to
match filament count (the AFC/MMU/toolchanger configs that actually encode
same-physical routing).
Behavior matrix:
| Config | pem | Ooze behavior |
|---|---|---|
| Single-extruder + SEMM | (any) | `init_ooze_prevention` already disables ooze. No change. |
| Single-extruder, no SEMM | (any) | Single filament, no toolchanges. N/A. |
| IDEX / Toolchanger | `[0,1,…]` per-filament | Cross-physical → ooze runs as before. |
| Vanilla AFC, SEMM=true | (any) | `init_ooze_prevention` disables ooze. No change. |
| Vanilla AFC, SEMM=false | `[0,0,…]` per-filament | Same physical → **ooze SKIPPED** (the fix). |
| Toolchanger + AFC | per-filament | AFC swaps skip, cross-physical swaps run. |
| Default pem `[0]` (1 entry) | shorter than filament count | Bounds check fails for filament index ≥ 1 → ooze runs as before. No-op for profiles that haven't authored a per-filament pem. |
| Empty pem | `[]` | Guard returns false → ooze runs as before. |
The guard depends only on physical_extruder_map; no machine-class check.
Any printer whose pem is sized to filament count and indicates multiple
logical slots routed to the same physical hotend benefits.
124 upstream commits including CrealityPrint integration (added include
in Plater.cpp alongside the existing IMEXHelpers include), profile fixes
and version bumps (#14084, #14085, Polymaker), CI artifact publishing,
test refactors (arachne walls test added; test_3mf/test_config/
test_gcodewriter content moved/removed upstream — IMEX test file
preserved as it is feedback-only), translations.
* Preserve support base outline/fill order
Honor no_sort when emitting support toolpaths to keep outline-first order.
Group tree support base paths (including lightning) into per-area no_sort collections to prevent interleaving across islands.
Keep lightning layer lookup side-effect free.
* Tag Orca specific changes
Tag Orca specific changes vs. Bambu using the comment //ORCA: . This helps when reviewing merge commits from upstream Bambu so we don't end up causing regressions when pulling in commits from upstream
* Fix air filtration gcode emitted even if not not supported
- do not emit air filtration gcode if not supported by the printer
- removed redundant "add_eol" parameter from "set_exhaust_fan()" function
SoftFever