mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-12 10:21:17 +00:00
Merge upstream main into IMEX parallel printing branch
Resolves two conflicts: - GLCanvas3D.hpp: keep both the IMEX ghost render declarations and upstream's _render_wireframe_overlay(). - test_gcodewriter.cpp: both sides appended test cases to the same region; keep upstream's origin/machine-limit tests alongside the pressure-advance and temperature scenarios.
This commit is contained in:
Clifford Garwood
@@ -15,7 +15,7 @@ jobs:
|
||||
|
||||
steps:
|
||||
- name: Checkout repository
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v7
|
||||
|
||||
- name: Setup Bun
|
||||
uses: oven-sh/setup-bun@v2
|
||||
|
||||
@@ -29,7 +29,7 @@ jobs:
|
||||
|
||||
steps:
|
||||
- name: Checkout repository
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v7
|
||||
|
||||
- name: Setup Bun
|
||||
uses: oven-sh/setup-bun@v2
|
||||
|
||||
@@ -122,54 +122,73 @@ jobs:
|
||||
arch: universal
|
||||
macos-combine-only: true
|
||||
secrets: inherit
|
||||
unit_tests:
|
||||
name: Unit Tests
|
||||
# Tests are built on the aarch64 leg by default (faster GitHub arm runner),
|
||||
# so run them there; self-hosted builds them on the amd64 server instead.
|
||||
runs-on: ${{ vars.SELF_HOSTED && 'orca-lnx-server' || 'ubuntu-24.04-arm' }}
|
||||
# One test job per built arch, on the runner that built it.
|
||||
unit_tests_linux_x86_64:
|
||||
name: Linux x86_64
|
||||
needs: build_linux
|
||||
if: ${{ !cancelled() && success() }}
|
||||
uses: ./.github/workflows/unit_tests.yml
|
||||
with:
|
||||
os: ${{ vars.SELF_HOSTED && 'orca-lnx-server' || 'ubuntu-24.04' }}
|
||||
artifact: ${{ github.sha }}-tests-linux-x86_64
|
||||
unit_tests_linux_aarch64:
|
||||
name: Linux aarch64
|
||||
needs: build_linux
|
||||
if: ${{ !cancelled() && success() }}
|
||||
uses: ./.github/workflows/unit_tests.yml
|
||||
with:
|
||||
os: ubuntu-24.04-arm
|
||||
artifact: ${{ github.sha }}-tests-linux-aarch64
|
||||
unit_tests_windows_x64:
|
||||
name: Windows x64
|
||||
needs: build_windows
|
||||
if: ${{ !cancelled() && success() }}
|
||||
uses: ./.github/workflows/unit_tests.yml
|
||||
with:
|
||||
os: ${{ vars.SELF_HOSTED && 'orca-win-server' || 'windows-latest' }}
|
||||
artifact: ${{ github.sha }}-tests-windows-x64
|
||||
unit_tests_windows_arm64:
|
||||
name: Windows arm64
|
||||
needs: build_windows
|
||||
if: ${{ !cancelled() && success() }}
|
||||
uses: ./.github/workflows/unit_tests.yml
|
||||
with:
|
||||
os: windows-11-arm
|
||||
artifact: ${{ github.sha }}-tests-windows-arm64
|
||||
test-dir: build-arm64/tests
|
||||
unit_tests_macos_arm64:
|
||||
name: macOS arm64
|
||||
needs: build_macos_arch
|
||||
if: ${{ !cancelled() && success() }}
|
||||
uses: ./.github/workflows/unit_tests.yml
|
||||
with:
|
||||
os: ${{ vars.SELF_HOSTED && 'orca-macos-arm64' || 'macos-14' }}
|
||||
artifact: ${{ github.sha }}-tests-macos-arm64
|
||||
test-dir: build/arm64/tests
|
||||
publish_test_results:
|
||||
name: Publish Test Results
|
||||
needs: [unit_tests_linux_x86_64, unit_tests_linux_aarch64, unit_tests_windows_x64, unit_tests_windows_arm64, unit_tests_macos_arm64]
|
||||
if: ${{ !cancelled() }}
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- name: Checkout
|
||||
uses: actions/checkout@v6
|
||||
with:
|
||||
sparse-checkout: |
|
||||
.github
|
||||
scripts
|
||||
tests
|
||||
- name: Apt-Install Dependencies
|
||||
if: ${{ !vars.SELF_HOSTED }}
|
||||
uses: ./.github/actions/apt-install-deps
|
||||
- name: Restore Test Artifact
|
||||
- name: Download Test Results
|
||||
uses: actions/download-artifact@v8
|
||||
with:
|
||||
name: ${{ github.sha }}-tests
|
||||
- uses: lukka/get-cmake@latest
|
||||
with:
|
||||
cmakeVersion: "~4.3.0" # use most recent 4.3.x version
|
||||
useLocalCache: true # <--= Use the local cache (default is 'false').
|
||||
useCloudCache: true
|
||||
- name: Unpackage and Run Unit Tests
|
||||
timeout-minutes: 20
|
||||
run: |
|
||||
tar -xvf build_tests.tar
|
||||
scripts/run_unit_tests.sh
|
||||
- name: Upload Test Logs
|
||||
uses: actions/upload-artifact@v7
|
||||
if: ${{ failure() }}
|
||||
with:
|
||||
name: unit-test-logs
|
||||
path: build/tests/**/*.log
|
||||
pattern: test-results-*
|
||||
path: test-results
|
||||
# Best-effort: a read-only token (e.g. fork PRs) can't write the check, so
|
||||
# don't let a publish failure fail the run. The test jobs gate correctness.
|
||||
- name: Publish Test Results
|
||||
if: always()
|
||||
continue-on-error: true
|
||||
uses: EnricoMi/publish-unit-test-result-action@v2
|
||||
with:
|
||||
files: "ctest_results.xml"
|
||||
- name: Delete Test Artifact
|
||||
files: "test-results/**/*.xml"
|
||||
- name: Delete Test Results
|
||||
if: success()
|
||||
uses: geekyeggo/delete-artifact@v6
|
||||
with:
|
||||
name: ${{ github.sha }}-tests
|
||||
name: test-results-*
|
||||
failOnError: false
|
||||
flatpak:
|
||||
name: "Flatpak"
|
||||
container:
|
||||
@@ -204,7 +223,7 @@ jobs:
|
||||
- name: "Remove unneeded stuff to free disk space"
|
||||
run:
|
||||
rm -rf /usr/local/lib/android/* /usr/share/dotnet/* /opt/ghc1/* "/usr/local/share/boost1/*" /opt/hostedtoolcache1/*
|
||||
- uses: actions/checkout@v6
|
||||
- uses: actions/checkout@v7
|
||||
- name: Get the version and date
|
||||
run: |
|
||||
ver_pure=$(grep 'set(SoftFever_VERSION' version.inc | cut -d '"' -f2)
|
||||
@@ -223,14 +242,14 @@ jobs:
|
||||
# Manage flatpak-builder cache externally so PRs restore but never upload
|
||||
- name: Restore flatpak-builder cache
|
||||
if: github.event_name == 'pull_request'
|
||||
uses: actions/cache/restore@v5
|
||||
uses: actions/cache/restore@v6
|
||||
with:
|
||||
path: .flatpak-builder
|
||||
key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.event.pull_request.base.sha }}
|
||||
restore-keys: flatpak-builder-${{ matrix.variant.arch }}-
|
||||
- name: Save/restore flatpak-builder cache
|
||||
if: github.event_name != 'pull_request'
|
||||
uses: actions/cache@v5
|
||||
uses: actions/cache@v6
|
||||
with:
|
||||
path: .flatpak-builder
|
||||
key: flatpak-builder-${{ matrix.variant.arch }}-${{ github.sha }}
|
||||
|
||||
@@ -26,7 +26,7 @@ jobs:
|
||||
valid-cache: ${{ steps.cache_deps.outputs.cache-hit }}
|
||||
steps:
|
||||
- name: Checkout
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v7
|
||||
with:
|
||||
lfs: 'false'
|
||||
|
||||
@@ -46,7 +46,7 @@ jobs:
|
||||
|
||||
- name: load cache
|
||||
id: cache_deps
|
||||
uses: actions/cache@v5
|
||||
uses: actions/cache@v6
|
||||
with:
|
||||
path: ${{ steps.set_outputs.outputs.cache-path }}
|
||||
key: ${{ steps.set_outputs.outputs.cache-key }}
|
||||
|
||||
@@ -34,12 +34,12 @@ jobs:
|
||||
|
||||
# Setup the environment
|
||||
- name: Checkout
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v7
|
||||
with:
|
||||
lfs: 'false'
|
||||
|
||||
- name: load cached deps
|
||||
uses: actions/cache@v5
|
||||
uses: actions/cache@v6
|
||||
with:
|
||||
path: ${{ inputs.cache-path }}
|
||||
key: ${{ inputs.cache-key }}
|
||||
|
||||
@@ -37,13 +37,13 @@ jobs:
|
||||
|
||||
steps:
|
||||
- name: Checkout
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v7
|
||||
with:
|
||||
lfs: 'false'
|
||||
|
||||
- name: load cached deps
|
||||
if: ${{ !(runner.os == 'macOS' && inputs.macos-combine-only) }}
|
||||
uses: actions/cache@v5
|
||||
uses: actions/cache@v6
|
||||
with:
|
||||
path: ${{ inputs.cache-path }}
|
||||
key: ${{ inputs.cache-key }}
|
||||
@@ -141,8 +141,26 @@ jobs:
|
||||
- name: Build slicer mac
|
||||
if: runner.os == 'macOS' && !inputs.macos-combine-only
|
||||
working-directory: ${{ github.workspace }}
|
||||
# arm64 only: build the tests here; the unit_tests_macos job runs them.
|
||||
env:
|
||||
ORCA_TESTS_BUILD_ONLY: ${{ inputs.arch == 'arm64' && '1' || '' }}
|
||||
run: |
|
||||
./build_release_macos.sh -s -n -x ${{ !vars.SELF_HOSTED && '-1' || '' }} -a ${{ inputs.arch }} -t 10.15
|
||||
./build_release_macos.sh -s -n -x ${{ !vars.SELF_HOSTED && '-1' || '' }} -a ${{ inputs.arch }} -t 10.15 ${{ inputs.arch == 'arm64' && '-T' || '' }}
|
||||
|
||||
- name: Pack unit tests mac
|
||||
if: runner.os == 'macOS' && !inputs.macos-combine-only && inputs.arch == 'arm64'
|
||||
working-directory: ${{ github.workspace }}
|
||||
run: tar -cvf build_tests.tar build/arm64/tests
|
||||
|
||||
- name: Upload Test Artifact mac
|
||||
if: runner.os == 'macOS' && !inputs.macos-combine-only && inputs.arch == 'arm64'
|
||||
uses: actions/upload-artifact@v7
|
||||
with:
|
||||
name: ${{ github.sha }}-tests-macos-arm64
|
||||
overwrite: true
|
||||
path: build_tests.tar
|
||||
retention-days: 5
|
||||
if-no-files-found: error
|
||||
|
||||
- name: Pack macOS app bundle ${{ inputs.arch }}
|
||||
if: runner.os == 'macOS' && !inputs.macos-combine-only
|
||||
@@ -335,11 +353,28 @@ jobs:
|
||||
# env:
|
||||
# WindowsSdkDir: 'C:\Program Files (x86)\Windows Kits\10\'
|
||||
# WindowsSDKVersion: '10.0.26100.0\'
|
||||
# "tests" builds the unit tests too; the unit_tests_windows_* jobs run them.
|
||||
run: |
|
||||
$arch = "${{ inputs.arch }}"
|
||||
if ($arch -eq "arm64") { .\build_release_vs.bat slicer arm64 } else { .\build_release_vs.bat slicer }
|
||||
if ($arch -eq "arm64") { .\build_release_vs.bat slicer arm64 tests } else { .\build_release_vs.bat slicer tests }
|
||||
shell: pwsh
|
||||
|
||||
- name: Pack unit tests Win
|
||||
if: runner.os == 'Windows'
|
||||
working-directory: ${{ github.workspace }}
|
||||
shell: pwsh
|
||||
run: tar -cvf build_tests.tar ${{ env.BUILD_DIR }}/tests
|
||||
|
||||
- name: Upload Test Artifact Win
|
||||
if: runner.os == 'Windows'
|
||||
uses: actions/upload-artifact@v7
|
||||
with:
|
||||
name: ${{ github.sha }}-tests-windows-${{ inputs.arch }}
|
||||
overwrite: true
|
||||
path: build_tests.tar
|
||||
retention-days: 5
|
||||
if-no-files-found: error
|
||||
|
||||
# NSIS is x86-only; it runs (and the installer it emits runs) under ARM64's
|
||||
# x86 emulation, packaging the native arm64 payload from build-arm64.
|
||||
- name: Create installer Win
|
||||
@@ -452,26 +487,22 @@ jobs:
|
||||
if: runner.os == 'Linux'
|
||||
shell: bash
|
||||
run: |
|
||||
# Build + tar the unit tests (-t) only on the leg that runs them: the
|
||||
# aarch64 leg by default (faster GitHub arm runner), or amd64 when using
|
||||
# self-hosted runners (no arm self-hosted server). unit_tests downloads
|
||||
# this tarball. The profile validator is built with -s, so amd64 keeps it.
|
||||
tests=${{ (!vars.SELF_HOSTED && inputs.arch == 'aarch64') || (vars.SELF_HOSTED && inputs.arch != 'aarch64') }}
|
||||
if $tests; then flags=-istrlL; else flags=-isrlL; fi
|
||||
./build_linux.sh "$flags"
|
||||
# Build + tar the unit tests (-t) on both Linux legs so each arch
|
||||
# (x86_64 + aarch64) gets tested by its own unit_tests_linux_* job.
|
||||
./build_linux.sh -istrlL
|
||||
./scripts/check_appimage_libs.sh ./build/package ./build/package/bin/orca-slicer
|
||||
appimage=./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}${{ env.arch_suffix }}_${{ env.ver }}.AppImage
|
||||
mv -n ./build/OrcaSlicer_Linux_V${{ env.ver_pure }}.AppImage "$appimage"
|
||||
chmod +x "$appimage"
|
||||
if $tests; then tar -cvpf build_tests.tar build/tests; fi
|
||||
tar -cvf build_tests.tar build/tests
|
||||
|
||||
# Use tar because upload-artifacts won't always preserve directory structure
|
||||
# and doesn't preserve file permissions
|
||||
- name: Upload Test Artifact
|
||||
if: runner.os == 'Linux' && ((!vars.SELF_HOSTED && inputs.arch == 'aarch64') || (vars.SELF_HOSTED && inputs.arch != 'aarch64'))
|
||||
if: runner.os == 'Linux'
|
||||
uses: actions/upload-artifact@v7
|
||||
with:
|
||||
name: ${{ github.sha }}-tests
|
||||
name: ${{ github.sha }}-tests-linux-${{ inputs.arch == 'aarch64' && 'aarch64' || 'x86_64' }}
|
||||
overwrite: true
|
||||
path: build_tests.tar
|
||||
retention-days: 5
|
||||
|
||||
@@ -14,7 +14,7 @@ jobs:
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- name: Checkout repository
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v7
|
||||
|
||||
- name: Install gettext
|
||||
run: |
|
||||
|
||||
@@ -24,7 +24,7 @@ jobs:
|
||||
runs-on: ubuntu-24.04
|
||||
steps:
|
||||
- name: Checkout repository
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v7
|
||||
|
||||
- name: Run extra JSON check
|
||||
id: extra_json_check
|
||||
@@ -41,7 +41,7 @@ jobs:
|
||||
curl -L -o OrcaSlicer_profile_validator https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/OrcaSlicer_profile_validator_Linux_Ubuntu2404_nightly
|
||||
chmod +x ./OrcaSlicer_profile_validator
|
||||
|
||||
# validate profiles
|
||||
# Validate all system profiles.
|
||||
- name: validate system profiles
|
||||
id: validate_system
|
||||
continue-on-error: true
|
||||
@@ -63,11 +63,101 @@ jobs:
|
||||
continue-on-error: true
|
||||
working-directory: ${{ github.workspace }}
|
||||
run: |
|
||||
set +e
|
||||
curl -LJO https://github.com/OrcaSlicer/OrcaSlicer/releases/download/nightly-builds/orca_custom_preset_tests.zip
|
||||
unzip -q ./orca_custom_preset_tests.zip -d ${{ github.workspace }}/resources/profiles
|
||||
./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2 2>&1 | tee ${{ runner.temp }}/validate_custom.log
|
||||
exit ${PIPESTATUS[0]}
|
||||
fixtures_dir="${{ runner.temp }}/profile-fixtures"
|
||||
output_dir="${{ runner.temp }}/custom-preset-validation"
|
||||
combined_log="${{ runner.temp }}/validate_custom.log"
|
||||
summary="${output_dir}/summary.md"
|
||||
release_url="https://github.com/OrcaSlicer/OrcaSlicer-profile-validator/releases/download/fixture-archive"
|
||||
|
||||
rm -rf "${fixtures_dir}" "${output_dir}"
|
||||
mkdir -p "${fixtures_dir}" "${output_dir}"
|
||||
|
||||
curl -fsSL -o "${fixtures_dir}/manifest.json" "${release_url}/manifest.json"
|
||||
|
||||
MANIFEST_PATH="${fixtures_dir}/manifest.json" python3 <<'PY' > "${fixtures_dir}/fixtures.tsv"
|
||||
import json
|
||||
import os
|
||||
|
||||
with open(os.environ["MANIFEST_PATH"], encoding="utf-8") as fh:
|
||||
manifest = json.load(fh)
|
||||
|
||||
if isinstance(manifest, dict):
|
||||
entries = manifest.get("fixtures", [])
|
||||
else:
|
||||
entries = manifest
|
||||
|
||||
for entry in entries:
|
||||
version = entry.get("version", "")
|
||||
asset = entry.get("asset", "")
|
||||
sha256 = entry.get("asset_sha256", "")
|
||||
if not version or not asset:
|
||||
continue
|
||||
print(f"{version}\t{asset}\t{sha256}")
|
||||
PY
|
||||
|
||||
if [ ! -s "${fixtures_dir}/fixtures.tsv" ]; then
|
||||
echo "No custom preset fixtures found in ${release_url}/manifest.json" | tee "${combined_log}"
|
||||
exit 1
|
||||
fi
|
||||
|
||||
{
|
||||
echo "## Custom Preset Fixture Validation"
|
||||
echo ""
|
||||
echo "| Version | Status | Log |"
|
||||
echo "| --- | --- | --- |"
|
||||
} > "${summary}"
|
||||
|
||||
status=0
|
||||
failed_logs=()
|
||||
|
||||
while IFS=$'\t' read -r version asset expected_sha256; do
|
||||
fixture_zip="${fixtures_dir}/${asset}"
|
||||
asset_url_name="$(python3 -c 'import sys, urllib.parse; print(urllib.parse.quote(sys.argv[1], safe=""))' "${asset}")"
|
||||
profile_tree="${output_dir}/profiles-${version}"
|
||||
log_path="${output_dir}/${version}.log"
|
||||
|
||||
curl -fsSL -o "${fixture_zip}" "${release_url}/${asset_url_name}"
|
||||
|
||||
if [ -n "${expected_sha256}" ] && [ "${expected_sha256}" != "<sha256>" ]; then
|
||||
echo "${expected_sha256} ${fixture_zip}" | sha256sum -c -
|
||||
fi
|
||||
|
||||
rm -rf "${profile_tree}"
|
||||
mkdir -p "${profile_tree}"
|
||||
cp -a "${{ github.workspace }}/resources/profiles/." "${profile_tree}/"
|
||||
rm -rf "${profile_tree}/user"
|
||||
unzip -q "${fixture_zip}" -d "${profile_tree}"
|
||||
|
||||
set +e
|
||||
./OrcaSlicer_profile_validator -p "${profile_tree}" -l 2 > "${log_path}" 2>&1
|
||||
result=$?
|
||||
set -e
|
||||
|
||||
if [ "${result}" -eq 0 ]; then
|
||||
echo "| ${version} | PASS | ${version}.log |" >> "${summary}"
|
||||
else
|
||||
echo "| ${version} | FAIL | ${version}.log |" >> "${summary}"
|
||||
failed_logs+=("${log_path}")
|
||||
status=1
|
||||
fi
|
||||
done < "${fixtures_dir}/fixtures.tsv"
|
||||
|
||||
{
|
||||
cat "${summary}"
|
||||
if [ "${#failed_logs[@]}" -gt 0 ]; then
|
||||
echo ""
|
||||
echo "## Failed Fixture Logs"
|
||||
for log_path in "${failed_logs[@]}"; do
|
||||
echo ""
|
||||
echo "### $(basename "${log_path}" .log)"
|
||||
echo '```'
|
||||
head -c 12000 "${log_path}" || echo "No output captured"
|
||||
echo '```'
|
||||
done
|
||||
fi
|
||||
} | tee "${combined_log}"
|
||||
|
||||
exit "${status}"
|
||||
|
||||
- name: Prepare PR number for comment workflow
|
||||
if: ${{ always() && github.event_name == 'pull_request' }}
|
||||
|
||||
@@ -20,14 +20,14 @@ jobs:
|
||||
|
||||
steps:
|
||||
- name: Checkout repository
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v7
|
||||
|
||||
- name: Run Claude Code slash command
|
||||
uses: anthropics/claude-code-base-action@beta
|
||||
with:
|
||||
prompt: "/dedupe ${{ github.repository }}/issues/${{ github.event.issue.number || inputs.issue_number }}"
|
||||
claude_code_oauth_token: ${{ secrets.CLAUDE_CODE_OAUTH_TOKEN }}
|
||||
claude_args: "--model claude-sonnet-4-5-20250929"
|
||||
model: "claude-sonnet-4-5-20250929"
|
||||
claude_env: |
|
||||
GH_TOKEN: ${{ secrets.GITHUB_TOKEN }}
|
||||
|
||||
|
||||
@@ -26,7 +26,7 @@ jobs:
|
||||
remove-existing-swap-files: true
|
||||
|
||||
- name: Checkout repository
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v7
|
||||
|
||||
- name: Install Doxygen and Graphviz
|
||||
run: |
|
||||
|
||||
@@ -21,7 +21,7 @@ jobs:
|
||||
steps:
|
||||
- name: Cache shellcheck download
|
||||
id: cache-shellcheck-v0_11
|
||||
uses: actions/cache@v5
|
||||
uses: actions/cache@v6
|
||||
with:
|
||||
path: ~/shellcheck
|
||||
key: ${{ runner.os }}-shellcheck-v0_11
|
||||
@@ -36,7 +36,7 @@ jobs:
|
||||
tar -xvf ~/sc.tar.xz -C ~
|
||||
mv ~/shellcheck-"${INPUT_VERSION}"/shellcheck ~/shellcheck
|
||||
|
||||
- uses: actions/checkout@v6
|
||||
- uses: actions/checkout@v7
|
||||
with:
|
||||
fetch-depth: 1
|
||||
|
||||
|
||||
@@ -0,0 +1,73 @@
|
||||
name: Unit Tests
|
||||
|
||||
# Download a platform's test artifact, run ctest, and upload the JUnit
|
||||
# results for aggregation. Called once per arch from build_all.yml.
|
||||
on:
|
||||
workflow_call:
|
||||
inputs:
|
||||
os:
|
||||
required: true
|
||||
type: string
|
||||
artifact:
|
||||
description: Test artifact uploaded by the build leg
|
||||
required: true
|
||||
type: string
|
||||
test-dir:
|
||||
description: Built tests dir; defaults to build/tests, override for arch-separated builds
|
||||
required: false
|
||||
type: string
|
||||
default: build/tests
|
||||
|
||||
jobs:
|
||||
unit_tests:
|
||||
# Static "Unit Tests"; the per-arch label is the caller's job name, so the
|
||||
# graph shows e.g. "Windows x64 / Unit Tests".
|
||||
name: Unit Tests
|
||||
runs-on: ${{ inputs.os }}
|
||||
steps:
|
||||
- name: Checkout
|
||||
uses: actions/checkout@v7
|
||||
with:
|
||||
# tests/data is referenced by absolute path (TEST_DATA_DIR).
|
||||
sparse-checkout: |
|
||||
.github
|
||||
scripts
|
||||
tests
|
||||
- name: Apt-Install Dependencies
|
||||
if: runner.os == 'Linux' && !vars.SELF_HOSTED
|
||||
uses: ./.github/actions/apt-install-deps
|
||||
- name: Restore Test Artifact
|
||||
uses: actions/download-artifact@v8
|
||||
with:
|
||||
name: ${{ inputs.artifact }}
|
||||
- uses: lukka/get-cmake@latest
|
||||
with:
|
||||
cmakeVersion: "~4.3.0" # use most recent 4.3.x version
|
||||
useLocalCache: true
|
||||
useCloudCache: true
|
||||
- name: Unpackage and Run Unit Tests
|
||||
timeout-minutes: 20
|
||||
shell: bash
|
||||
run: |
|
||||
tar -xvf build_tests.tar
|
||||
# Multi-config generators (Windows/macOS) need a config; Linux is single-config.
|
||||
scripts/run_unit_tests.sh "${{ inputs.test-dir }}" "${{ runner.os != 'Linux' && 'Release' || '' }}"
|
||||
- name: Upload Test Logs
|
||||
if: ${{ failure() }}
|
||||
uses: actions/upload-artifact@v7
|
||||
with:
|
||||
name: unit-test-logs-${{ inputs.artifact }}
|
||||
path: ${{ inputs.test-dir }}/**/*.log
|
||||
- name: Upload Test Results
|
||||
if: always()
|
||||
uses: actions/upload-artifact@v7
|
||||
with:
|
||||
name: test-results-${{ inputs.artifact }}
|
||||
path: ctest_results.xml
|
||||
retention-days: 5
|
||||
if-no-files-found: warn
|
||||
- name: Delete Test Artifact
|
||||
if: success()
|
||||
uses: geekyeggo/delete-artifact@v6
|
||||
with:
|
||||
name: ${{ inputs.artifact }}
|
||||
@@ -10,7 +10,7 @@ jobs:
|
||||
runs-on: ubuntu-latest
|
||||
steps:
|
||||
- name: Checkout repository
|
||||
uses: actions/checkout@v6
|
||||
uses: actions/checkout@v7
|
||||
|
||||
- name: Setup Python
|
||||
uses: actions/setup-python@v6
|
||||
|
||||
+1
-1
@@ -710,7 +710,7 @@ endif ()
|
||||
set(L10N_DIR "${SLIC3R_RESOURCES_DIR}/i18n")
|
||||
set(BBL_L18N_DIR "${CMAKE_CURRENT_SOURCE_DIR}/localization/i18n")
|
||||
add_custom_target(gettext_make_pot
|
||||
COMMAND xgettext --keyword=L --keyword=_L --keyword=_u8L --keyword=L_CONTEXT:1,2c --keyword=_L_PLURAL:1,2 --add-comments=TRN --from-code=UTF-8 --no-location --debug --boost
|
||||
COMMAND xgettext --keyword=L --keyword=_L --keyword=_u8L --keyword=L_CONTEXT:1,2c --keyword=_CTX:1,2c --keyword=_CTX_utf8:1,2c --keyword=_L_PLURAL:1,2 --add-comments=TRN --from-code=UTF-8 --no-location --debug --boost
|
||||
-f "${BBL_L18N_DIR}/list.txt"
|
||||
-o "${BBL_L18N_DIR}/OrcaSlicer.pot"
|
||||
COMMAND hintsToPot ${SLIC3R_RESOURCES_DIR} ${BBL_L18N_DIR}
|
||||
|
||||
@@ -59,7 +59,7 @@ while getopts ":dpa:snt:xbc:i:1Tuh" opt; do
|
||||
echo " -c: Set CMake build configuration, default is Release"
|
||||
echo " -i: Add a prefix to ignore during CMake dependency discovery (repeatable), defaults to /opt/local:/usr/local:/opt/homebrew"
|
||||
echo " -1: Use single job for building"
|
||||
echo " -T: Build and run tests"
|
||||
echo " -T: Build and run tests (set ORCA_TESTS_BUILD_ONLY=1 to build without running)"
|
||||
exit 0
|
||||
;;
|
||||
* )
|
||||
@@ -209,13 +209,10 @@ function build_slicer() {
|
||||
cmake --build . --config "$BUILD_CONFIG" --target "$SLICER_BUILD_TARGET"
|
||||
)
|
||||
|
||||
if [ "1." == "$BUILD_TESTS". ]; then
|
||||
echo "Running tests for $_ARCH..."
|
||||
(
|
||||
set -x
|
||||
cd "$PROJECT_BUILD_DIR"
|
||||
ctest --build-config "$BUILD_CONFIG" --output-on-failure
|
||||
)
|
||||
# -T also runs the tests; ORCA_TESTS_BUILD_ONLY=1 builds them without
|
||||
# running, so CI can build here and run them in a dedicated job.
|
||||
if [ "1." == "$BUILD_TESTS". ] && [ "1." != "$ORCA_TESTS_BUILD_ONLY". ]; then
|
||||
"$PROJECT_DIR/scripts/run_unit_tests.sh" "build/$_ARCH/tests" "$BUILD_CONFIG"
|
||||
fi
|
||||
|
||||
echo "Verify localization with gettext..."
|
||||
|
||||
@@ -20,6 +20,12 @@ for %%a in (%*) do (
|
||||
if "%%a"=="-x" set USE_NINJA=1
|
||||
)
|
||||
|
||||
@REM Check for unit-tests option ("tests")
|
||||
set BUILD_TESTS=OFF
|
||||
for %%a in (%*) do (
|
||||
if /I "%%a"=="tests" set BUILD_TESTS=ON
|
||||
)
|
||||
|
||||
if "%USE_NINJA%"=="1" (
|
||||
echo Using Ninja Multi-Config generator
|
||||
set CMAKE_GENERATOR="Ninja Multi-Config"
|
||||
@@ -145,10 +151,10 @@ cd %build_dir%
|
||||
echo on
|
||||
set CMAKE_POLICY_VERSION_MINIMUM=3.5
|
||||
if "%USE_NINJA%"=="1" (
|
||||
cmake .. -G %CMAKE_GENERATOR% -DORCA_TOOLS=ON %SIG_FLAG% -DCMAKE_BUILD_TYPE=%build_type%
|
||||
cmake .. -G %CMAKE_GENERATOR% -DORCA_TOOLS=ON %SIG_FLAG% -DBUILD_TESTS=%BUILD_TESTS% -DCMAKE_BUILD_TYPE=%build_type%
|
||||
cmake --build . --config %build_type% --target ALL_BUILD
|
||||
) else (
|
||||
cmake .. -G %CMAKE_GENERATOR% -A %arch% -DORCA_TOOLS=ON %SIG_FLAG% -DCMAKE_BUILD_TYPE=%build_type%
|
||||
cmake .. -G %CMAKE_GENERATOR% -A %arch% -DORCA_TOOLS=ON %SIG_FLAG% -DBUILD_TESTS=%BUILD_TESTS% -DCMAKE_BUILD_TYPE=%build_type%
|
||||
cmake --build . --config %build_type% --target ALL_BUILD -- -m
|
||||
)
|
||||
@echo off
|
||||
|
||||
+491
-156
@@ -8,7 +8,7 @@ msgid ""
|
||||
msgstr ""
|
||||
"Project-Id-Version: PACKAGE VERSION\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2026-06-28 12:42-0300\n"
|
||||
"POT-Creation-Date: 2026-07-12 12:27-0300\n"
|
||||
"PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
|
||||
"Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
|
||||
"Language-Team: LANGUAGE <LL@li.org>\n"
|
||||
@@ -163,6 +163,12 @@ msgstr ""
|
||||
msgid "Gap Fill"
|
||||
msgstr ""
|
||||
|
||||
msgid "Vertical"
|
||||
msgstr ""
|
||||
|
||||
msgid "Horizontal"
|
||||
msgstr ""
|
||||
|
||||
#, possible-boost-format
|
||||
msgid "Allows painting only on facets selected by: \"%1%\""
|
||||
msgstr ""
|
||||
@@ -255,12 +261,6 @@ msgstr ""
|
||||
msgid "Height Range"
|
||||
msgstr ""
|
||||
|
||||
msgid "Vertical"
|
||||
msgstr ""
|
||||
|
||||
msgid "Horizontal"
|
||||
msgstr ""
|
||||
|
||||
msgid "Remove painted color"
|
||||
msgstr ""
|
||||
|
||||
@@ -325,6 +325,7 @@ msgstr ""
|
||||
msgid "Optimize orientation"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "Verb"
|
||||
msgid "Scale"
|
||||
msgstr ""
|
||||
|
||||
@@ -334,6 +335,7 @@ msgstr ""
|
||||
msgid "Error: Please close all toolbar menus first"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "inches"
|
||||
msgid "in"
|
||||
msgstr ""
|
||||
|
||||
@@ -367,6 +369,9 @@ msgstr ""
|
||||
msgid "Object operations"
|
||||
msgstr ""
|
||||
|
||||
msgid "Scale"
|
||||
msgstr ""
|
||||
|
||||
msgid "Volume operations"
|
||||
msgstr ""
|
||||
|
||||
@@ -388,25 +393,32 @@ msgstr ""
|
||||
msgid "Reset rotation"
|
||||
msgstr ""
|
||||
|
||||
msgid "Object coordinates"
|
||||
msgid "World"
|
||||
msgstr ""
|
||||
|
||||
msgid "World coordinates"
|
||||
msgid "Object"
|
||||
msgstr ""
|
||||
|
||||
msgid "Translate(Relative)"
|
||||
msgid "Part"
|
||||
msgstr ""
|
||||
|
||||
msgid "Relative"
|
||||
msgstr ""
|
||||
|
||||
msgid "Coordinate system used for transform actions."
|
||||
msgstr ""
|
||||
|
||||
msgid "Absolute"
|
||||
msgstr ""
|
||||
|
||||
msgid "Reset current rotation to the value when open the rotation tool."
|
||||
msgstr ""
|
||||
|
||||
msgid "Rotate (absolute)"
|
||||
msgstr ""
|
||||
|
||||
msgid "Reset current rotation to real zeros."
|
||||
msgstr ""
|
||||
|
||||
msgid "Part coordinates"
|
||||
msgctxt "Noun"
|
||||
msgid "Scale"
|
||||
msgstr ""
|
||||
|
||||
#. TRN - Input label. Be short as possible
|
||||
@@ -512,12 +524,6 @@ msgstr ""
|
||||
msgid "Spacing"
|
||||
msgstr ""
|
||||
|
||||
msgid "Part"
|
||||
msgstr ""
|
||||
|
||||
msgid "Object"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Click to flip the cut plane\n"
|
||||
"Drag to move the cut plane"
|
||||
@@ -1820,23 +1826,30 @@ msgstr ""
|
||||
msgid "The version of Orca Slicer is too low and needs to be updated to the latest version before it can be used normally."
|
||||
msgstr ""
|
||||
|
||||
msgid "Cloud sync conflict:"
|
||||
msgstr ""
|
||||
|
||||
#, possible-c-format, possible-boost-format
|
||||
msgid "Cloud sync conflict for preset \"%s\":"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Cloud sync conflict: this preset has a newer version in OrcaCloud.\n"
|
||||
"This preset has a newer version in OrcaCloud.\n"
|
||||
"Pull downloads the cloud copy. Force push overwrites it with your local preset."
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Cloud sync conflict: a preset with this name already exists in OrcaCloud.\n"
|
||||
"A preset with this name already exists in OrcaCloud.\n"
|
||||
"Pull downloads the cloud copy. Force push overwrites it with your local preset."
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Cloud sync conflict: a preset with the same name was previously deleted from the cloud.\n"
|
||||
"A preset with the same name was previously deleted from the cloud.\n"
|
||||
"Delete will delete your local preset. Force push overwrites it with your local preset."
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Cloud sync conflict: there was an unexpected or unidentified preset conflict.\n"
|
||||
"There was an unexpected or unidentified preset conflict.\n"
|
||||
"Pull downloads the cloud copy. Force push overwrites it with your local preset."
|
||||
msgstr ""
|
||||
|
||||
@@ -1845,6 +1858,12 @@ msgid ""
|
||||
"Do you want to continue?"
|
||||
msgstr ""
|
||||
|
||||
#, possible-c-format, possible-boost-format
|
||||
msgid ""
|
||||
"Force push will overwrite the cloud copy of preset \"%s\" with your local changes.\n"
|
||||
"Do you want to continue?"
|
||||
msgstr ""
|
||||
|
||||
msgid "Resolve cloud sync conflict"
|
||||
msgstr ""
|
||||
|
||||
@@ -1912,7 +1931,8 @@ msgstr ""
|
||||
msgid "Sync user presets"
|
||||
msgstr ""
|
||||
|
||||
msgid "The preset content is too large to sync to the cloud (exceeds 1MB). Please reduce the preset size by removing custom configurations or use it locally only."
|
||||
#, possible-c-format, possible-boost-format
|
||||
msgid "The preset \"%s\" is too large to sync to the cloud (exceeds 1MB). Please reduce the preset size by removing custom configurations or use it locally only."
|
||||
msgstr ""
|
||||
|
||||
#, possible-c-format, possible-boost-format
|
||||
@@ -2122,6 +2142,9 @@ msgstr ""
|
||||
msgid "OrcaSliced Combo"
|
||||
msgstr ""
|
||||
|
||||
msgid "Orca Badge"
|
||||
msgstr ""
|
||||
|
||||
msgid "Orca Tolerance Test"
|
||||
msgstr ""
|
||||
|
||||
@@ -3484,6 +3507,7 @@ msgstr ""
|
||||
msgid "Save"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "Navigation"
|
||||
msgid "Back"
|
||||
msgstr ""
|
||||
|
||||
@@ -4766,6 +4790,7 @@ msgstr ""
|
||||
msgid "Color change"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "Noun"
|
||||
msgid "Print"
|
||||
msgstr ""
|
||||
|
||||
@@ -4921,11 +4946,15 @@ msgstr ""
|
||||
msgid "Align to Y axis"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "Camera"
|
||||
msgctxt "Camera View"
|
||||
msgid "Back"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "Camera View"
|
||||
msgid "Left"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "Camera"
|
||||
msgctxt "Camera View"
|
||||
msgid "Right"
|
||||
msgstr ""
|
||||
|
||||
@@ -5004,6 +5033,9 @@ msgstr ""
|
||||
msgid "Outline"
|
||||
msgstr ""
|
||||
|
||||
msgid "Wireframe"
|
||||
msgstr ""
|
||||
|
||||
msgid "Realistic View"
|
||||
msgstr ""
|
||||
|
||||
@@ -5239,6 +5271,10 @@ msgstr ""
|
||||
msgid "Export G-code file"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "Verb"
|
||||
msgid "Print"
|
||||
msgstr ""
|
||||
|
||||
msgid "Export plate sliced file"
|
||||
msgstr ""
|
||||
|
||||
@@ -5412,15 +5448,6 @@ msgstr ""
|
||||
msgid "Export"
|
||||
msgstr ""
|
||||
|
||||
msgid "Sync Presets"
|
||||
msgstr ""
|
||||
|
||||
msgid "Pull and apply the latest presets from OrcaCloud"
|
||||
msgstr ""
|
||||
|
||||
msgid "You must be logged in to sync presets from cloud."
|
||||
msgstr ""
|
||||
|
||||
msgid "Quit"
|
||||
msgstr ""
|
||||
|
||||
@@ -5535,6 +5562,15 @@ msgstr ""
|
||||
msgid "Preset Bundle"
|
||||
msgstr ""
|
||||
|
||||
msgid "Sync Presets"
|
||||
msgstr ""
|
||||
|
||||
msgid "Pull and apply the latest presets from OrcaCloud"
|
||||
msgstr ""
|
||||
|
||||
msgid "You must be logged in to sync presets from cloud."
|
||||
msgstr ""
|
||||
|
||||
msgid "Syncing presets from cloud…"
|
||||
msgstr ""
|
||||
|
||||
@@ -7518,6 +7554,45 @@ msgstr ""
|
||||
msgid "Choose Download Directory"
|
||||
msgstr ""
|
||||
|
||||
msgid "(Latest)"
|
||||
msgstr ""
|
||||
|
||||
msgid "Network plug-in switched successfully."
|
||||
msgstr ""
|
||||
|
||||
msgid "Success"
|
||||
msgstr ""
|
||||
|
||||
msgid "Failed to load network plug-in. Please restart the application."
|
||||
msgstr ""
|
||||
|
||||
#, possible-c-format, possible-boost-format
|
||||
msgid ""
|
||||
"You've selected network plug-in version %s.\n"
|
||||
"\n"
|
||||
"Would you like to download and install this version now?\n"
|
||||
"\n"
|
||||
"Note: The application may need to restart after installation."
|
||||
msgstr ""
|
||||
|
||||
msgid "Download Network Plug-in"
|
||||
msgstr ""
|
||||
|
||||
msgid "Reload the network plug-in without restarting the application"
|
||||
msgstr ""
|
||||
|
||||
msgid "Network plug-in reloaded successfully."
|
||||
msgstr ""
|
||||
|
||||
msgid "Reload"
|
||||
msgstr ""
|
||||
|
||||
msgid "Failed to reload network plug-in. Please restart the application."
|
||||
msgstr ""
|
||||
|
||||
msgid "Reload Failed"
|
||||
msgstr ""
|
||||
|
||||
msgid "Associate"
|
||||
msgstr ""
|
||||
|
||||
@@ -7572,12 +7647,6 @@ msgstr ""
|
||||
msgid "Show the splash screen during startup."
|
||||
msgstr ""
|
||||
|
||||
msgid "Show shared profiles notification"
|
||||
msgstr ""
|
||||
|
||||
msgid "Show a notification with a link to browse shared profiles when the selected printer is changed."
|
||||
msgstr ""
|
||||
|
||||
msgid "Use window buttons on left side"
|
||||
msgstr ""
|
||||
|
||||
@@ -7608,6 +7677,12 @@ msgstr ""
|
||||
msgid "Should printer/filament/process settings be loaded when opening a 3MF file?"
|
||||
msgstr ""
|
||||
|
||||
msgid "Auto backup"
|
||||
msgstr ""
|
||||
|
||||
msgid "Backup your project periodically to help with restoring from an occasional crash."
|
||||
msgstr ""
|
||||
|
||||
msgid "Maximum recent files"
|
||||
msgstr ""
|
||||
|
||||
@@ -7626,10 +7701,51 @@ msgstr ""
|
||||
msgid "If enabled, a parameter settings dialog will appear during STEP file import."
|
||||
msgstr ""
|
||||
|
||||
msgid "Auto backup"
|
||||
msgid "STEP importing: linear deflection"
|
||||
msgstr ""
|
||||
|
||||
msgid "Backup your project periodically to help with restoring from an occasional crash."
|
||||
msgid ""
|
||||
"Linear deflection used when meshing imported STEP files.\n"
|
||||
"Smaller values produce higher-quality meshes but increase processing time.\n"
|
||||
"Used as the default in the import dialog, or directly when the import dialog is disabled.\n"
|
||||
"Default: 0.003 mm."
|
||||
msgstr ""
|
||||
|
||||
msgid "STEP importing: angle deflection"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Angle deflection used when meshing imported STEP files.\n"
|
||||
"Smaller values produce higher-quality meshes but increase processing time.\n"
|
||||
"Used as the default in the import dialog, or directly when the import dialog is disabled.\n"
|
||||
"Default: 0.5."
|
||||
msgstr ""
|
||||
|
||||
msgid "STEP importing: Split into multiple objects"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"If enabled, compound and compsolid shapes in imported STEP files are split into multiple objects.\n"
|
||||
"Used as the default in the import dialog, or directly when the import dialog is disabled.\n"
|
||||
"Default: disabled."
|
||||
msgstr ""
|
||||
|
||||
msgid "Quality level for Draco export"
|
||||
msgstr ""
|
||||
|
||||
msgid "bits"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Controls the quantization bit depth used when compressing the mesh to Draco format.\n"
|
||||
"0 = lossless compression (geometry is preserved at full precision). Valid lossy values range from 8 to 30.\n"
|
||||
"Lower values produce smaller files but lose more geometric detail; higher values preserve more detail at the cost of larger files."
|
||||
msgstr ""
|
||||
|
||||
msgid "Store full source file paths in projects"
|
||||
msgstr ""
|
||||
|
||||
msgid "If enabled, saved projects store the absolute path to imported source files (STEP/STL/...), so \"Reload from disk\" still works when the source file is kept in a different folder than the project. If disabled, only the filename is stored, which keeps projects portable and avoids embedding absolute paths."
|
||||
msgstr ""
|
||||
|
||||
msgid "Preset"
|
||||
@@ -7662,6 +7778,12 @@ msgstr ""
|
||||
msgid "Optimizes filament area maximum height by chosen filament count."
|
||||
msgstr ""
|
||||
|
||||
msgid "Show shared profiles notification"
|
||||
msgstr ""
|
||||
|
||||
msgid "Show a notification with a link to browse shared profiles when the selected printer is changed."
|
||||
msgstr ""
|
||||
|
||||
msgid "Features"
|
||||
msgstr ""
|
||||
|
||||
@@ -7674,18 +7796,6 @@ msgstr ""
|
||||
msgid "Pop up to select filament grouping mode"
|
||||
msgstr ""
|
||||
|
||||
msgid "Quality level for Draco export"
|
||||
msgstr ""
|
||||
|
||||
msgid "bits"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Controls the quantization bit depth used when compressing the mesh to Draco format.\n"
|
||||
"0 = lossless compression (geometry is preserved at full precision). Valid lossy values range from 8 to 30.\n"
|
||||
"Lower values produce smaller files but lose more geometric detail; higher values preserve more detail at the cost of larger files."
|
||||
msgstr ""
|
||||
|
||||
msgid "Behaviour"
|
||||
msgstr ""
|
||||
|
||||
@@ -7910,18 +8020,6 @@ msgstr ""
|
||||
msgid "Auto sync user presets (Printer/Filament/Process)"
|
||||
msgstr ""
|
||||
|
||||
msgid "Update built-in presets automatically."
|
||||
msgstr ""
|
||||
|
||||
msgid "Use encrypted file for token storage"
|
||||
msgstr ""
|
||||
|
||||
msgid "Store authentication tokens in an encrypted file instead of the system keychain. (Requires restart)"
|
||||
msgstr ""
|
||||
|
||||
msgid "Filament Sync Options"
|
||||
msgstr ""
|
||||
|
||||
msgid "Filament sync mode"
|
||||
msgstr ""
|
||||
|
||||
@@ -7934,6 +8032,15 @@ msgstr ""
|
||||
msgid "Color only"
|
||||
msgstr ""
|
||||
|
||||
msgid "Update built-in presets automatically."
|
||||
msgstr ""
|
||||
|
||||
msgid "Use encrypted file for token storage"
|
||||
msgstr ""
|
||||
|
||||
msgid "Store authentication tokens in an encrypted file instead of the system keychain. (Requires restart)"
|
||||
msgstr ""
|
||||
|
||||
msgid "Bambu network plug-in"
|
||||
msgstr ""
|
||||
|
||||
@@ -7946,30 +8053,6 @@ msgstr ""
|
||||
msgid "Select the network plug-in version to use"
|
||||
msgstr ""
|
||||
|
||||
msgid "(Latest)"
|
||||
msgstr ""
|
||||
|
||||
msgid "Network plug-in switched successfully."
|
||||
msgstr ""
|
||||
|
||||
msgid "Success"
|
||||
msgstr ""
|
||||
|
||||
msgid "Failed to load network plug-in. Please restart the application."
|
||||
msgstr ""
|
||||
|
||||
#, possible-c-format, possible-boost-format
|
||||
msgid ""
|
||||
"You've selected network plug-in version %s.\n"
|
||||
"\n"
|
||||
"Would you like to download and install this version now?\n"
|
||||
"\n"
|
||||
"Note: The application may need to restart after installation."
|
||||
msgstr ""
|
||||
|
||||
msgid "Download Network Plug-in"
|
||||
msgstr ""
|
||||
|
||||
msgid "Associate files to OrcaSlicer"
|
||||
msgstr ""
|
||||
|
||||
@@ -8012,7 +8095,16 @@ msgstr ""
|
||||
msgid "Skip AMS blacklist check"
|
||||
msgstr ""
|
||||
|
||||
msgid "(Experimental) Keep painted feature after mesh change"
|
||||
msgid "Show unsupported presets"
|
||||
msgstr ""
|
||||
|
||||
msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
|
||||
msgstr ""
|
||||
|
||||
msgid "Experimental Features"
|
||||
msgstr ""
|
||||
|
||||
msgid "Keep painted feature after mesh change"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
@@ -8020,12 +8112,6 @@ msgid ""
|
||||
"Highly experimental! Slow and may create artifact."
|
||||
msgstr ""
|
||||
|
||||
msgid "Show unsupported presets"
|
||||
msgstr ""
|
||||
|
||||
msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
|
||||
msgstr ""
|
||||
|
||||
msgid "Allow Abnormal Storage"
|
||||
msgstr ""
|
||||
|
||||
@@ -8052,24 +8138,6 @@ msgstr ""
|
||||
msgid "trace"
|
||||
msgstr ""
|
||||
|
||||
msgid "Network plug-in"
|
||||
msgstr ""
|
||||
|
||||
msgid "Reload"
|
||||
msgstr ""
|
||||
|
||||
msgid "Reload the network plug-in without restarting the application"
|
||||
msgstr ""
|
||||
|
||||
msgid "Network plug-in reloaded successfully."
|
||||
msgstr ""
|
||||
|
||||
msgid "Failed to reload network plug-in. Please restart the application."
|
||||
msgstr ""
|
||||
|
||||
msgid "Reload Failed"
|
||||
msgstr ""
|
||||
|
||||
msgid "Debug"
|
||||
msgstr ""
|
||||
|
||||
@@ -8085,24 +8153,6 @@ msgstr ""
|
||||
msgid "Preferences sync"
|
||||
msgstr ""
|
||||
|
||||
msgid "View control settings"
|
||||
msgstr ""
|
||||
|
||||
msgid "Rotate view"
|
||||
msgstr ""
|
||||
|
||||
msgid "Pan view"
|
||||
msgstr ""
|
||||
|
||||
msgid "Zoom view"
|
||||
msgstr ""
|
||||
|
||||
msgid "Other"
|
||||
msgstr ""
|
||||
|
||||
msgid "Reverse scroll direction while zooming"
|
||||
msgstr ""
|
||||
|
||||
msgid "Enable SSL(MQTT)"
|
||||
msgstr ""
|
||||
|
||||
@@ -9801,11 +9851,7 @@ msgstr ""
|
||||
msgid "Successfully synchronized nozzle and AMS number information."
|
||||
msgstr ""
|
||||
|
||||
msgid "Continue to sync filaments"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "Sync_Nozzle_AMS"
|
||||
msgid "Cancel"
|
||||
msgid "Do you want to continue to sync filaments?"
|
||||
msgstr ""
|
||||
|
||||
msgid "Successfully synchronized filament color from printer."
|
||||
@@ -11041,7 +11087,7 @@ msgid ""
|
||||
"If left to zero, the bridging angle will be calculated automatically for each specific bridge.\n"
|
||||
"Otherwise the provided angle will be used according to:\n"
|
||||
" - The absolute coordinates\n"
|
||||
" - The absolute coordinates + Model rotation: If Align infill direction to model is enabled\n"
|
||||
" - The absolute coordinates + Model rotation: If Align directions to model is enabled\n"
|
||||
" - The optimal automatic angle + this value: If 'Relative Bridge Angle' is enabled\n"
|
||||
"\n"
|
||||
"Use 180° for zero absolute angle."
|
||||
@@ -11055,7 +11101,7 @@ msgid ""
|
||||
"If left to zero, the bridging angle will be calculated automatically for each specific bridge.\n"
|
||||
"Otherwise the provided angle will be used according to:\n"
|
||||
" - The absolute coordinates\n"
|
||||
" - The absolute coordinates + Model rotation: If Align infill direction to model is enabled\n"
|
||||
" - The absolute coordinates + Model rotation: If Align directions to model is enabled\n"
|
||||
" - The optimal automatic angle + this value: If 'Relative Bridge Angle' is enabled\n"
|
||||
"\n"
|
||||
"Use 180° for zero absolute angle."
|
||||
@@ -11679,6 +11725,42 @@ msgstr ""
|
||||
msgid "Density of top surface layer. A value of 100% creates a fully solid, smooth top layer. Reducing this value results in a textured top surface, according to the chosen top surface pattern. A value of 0% will result in only the walls on the top layer being created. Intended for aesthetic or functional purposes, not to fix issues such as over-extrusion."
|
||||
msgstr ""
|
||||
|
||||
msgid "Top surface expansion"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Expands the top surfaces by this distance to connect distinct top surfaces and fill gaps.\n"
|
||||
"Useful for cases where the top surface is interrupted by a raised feature, such as text on a plane.Expanding it removes the holes beneath these features and creates a continuous path with a better finish for printing on top.The expansion is applied to the original top surface, before any other processing such as bridging or overhang detection."
|
||||
msgstr ""
|
||||
|
||||
msgid "Top expansion wall margin"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Using “Top surface expansion” may cause a surface that did not previously touch the model's outer walls to now do so.\n"
|
||||
"This can cause contraction marks (such as the hull line) on the outer walls.\n"
|
||||
"By adding a small margin, this contraction will not occur directly on the walls, thereby preventing a visible mark."
|
||||
msgstr ""
|
||||
|
||||
msgid "Top expansion direction"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Direction in which the top surface expansion grows.\n"
|
||||
" - Inward grows into the holes and gaps left by features rising from the middle of a top surface.\n"
|
||||
" - Outward grows the outer edge of the surface, connecting surfaces separated by features that can divide a surface, such as a lattice pattern.\n"
|
||||
" - Inward and Outward does both."
|
||||
msgstr ""
|
||||
|
||||
msgid "Inward and Outward"
|
||||
msgstr ""
|
||||
|
||||
msgid "Inward"
|
||||
msgstr ""
|
||||
|
||||
msgid "Outward"
|
||||
msgstr ""
|
||||
|
||||
msgid "Bottom surface pattern"
|
||||
msgstr ""
|
||||
|
||||
@@ -11717,6 +11799,18 @@ msgstr ""
|
||||
msgid "This sets the threshold for small perimeter length. Default threshold is 0mm."
|
||||
msgstr ""
|
||||
|
||||
msgid "Small support perimeters"
|
||||
msgstr ""
|
||||
|
||||
msgid "Same as \"Small perimeters\", but for supports. This separate setting will affect the speed of support for areas <= `small_support_perimeter_threshold`. If expressed as a percentage (for example: 80%), it will be calculated on the support or support interface speed setting above. Set to zero for auto."
|
||||
msgstr ""
|
||||
|
||||
msgid "Small support perimeters threshold"
|
||||
msgstr ""
|
||||
|
||||
msgid "This sets the threshold for small support perimeter length. The default threshold is 0mm."
|
||||
msgstr ""
|
||||
|
||||
msgid "Walls printing order"
|
||||
msgstr ""
|
||||
|
||||
@@ -11869,21 +11963,25 @@ msgid ""
|
||||
"3. Enter the triplets of PA values, Flow and Accelerations in the text box here and save your filament profile."
|
||||
msgstr ""
|
||||
|
||||
msgid "Enable adaptive pressure advance for overhangs (beta)"
|
||||
msgid "Enable adaptive pressure advance within features (beta)"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
|
||||
"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
|
||||
msgstr ""
|
||||
|
||||
msgid "Pressure advance for bridges"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Pressure advance value for bridges. Set to 0 to disable.\n"
|
||||
"Enable adaptive PA whenever there are flow changes in a feature, such as line width changes in a corner or overhangs.\n"
|
||||
"\n"
|
||||
"A lower PA value when printing bridges helps reduce the appearance of slight under extrusion immediately after bridges. This is caused by the pressure drop in the nozzle when printing in the air and a lower PA helps counteract this."
|
||||
"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects.\n"
|
||||
"\n"
|
||||
"This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues."
|
||||
msgstr ""
|
||||
|
||||
msgid "Static pressure advance for bridges"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Static pressure advance value for bridges. Set to 0 to apply the same pressure advance as \n"
|
||||
"equivalent walls (using adaptive settings if enabled).\n"
|
||||
"\n"
|
||||
"A lower PA value when printing bridges helps reduce the appearance of slight under-extrusion immediately after bridges. This is caused by the pressure drop in the nozzle when printing in the air and a lower PA helps counteract this."
|
||||
msgstr ""
|
||||
|
||||
msgid "Default line width if other line widths are set to 0. If expressed as a %, it will be computed over the nozzle diameter."
|
||||
@@ -12240,6 +12338,22 @@ msgstr ""
|
||||
msgid "Angle for solid infill pattern, which controls the start or main direction of line."
|
||||
msgstr ""
|
||||
|
||||
msgid "Top layer direction"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Fixed angle for the top solid infill and ironing lines.\n"
|
||||
"Set to -1 to follow the default solid infill direction."
|
||||
msgstr ""
|
||||
|
||||
msgid "Bottom layer direction"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Fixed angle for the bottom solid infill lines.\n"
|
||||
"Set to -1 to follow the default solid infill direction."
|
||||
msgstr ""
|
||||
|
||||
msgid "Sparse infill density"
|
||||
msgstr ""
|
||||
|
||||
@@ -12247,12 +12361,12 @@ msgstr ""
|
||||
msgid "Density of internal sparse infill, 100% turns all sparse infill into solid infill and internal solid infill pattern will be used."
|
||||
msgstr ""
|
||||
|
||||
msgid "Align infill direction to model"
|
||||
msgid "Align directions to model"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Aligns infill, bridge, ironing and surface fill directions to follow the model's orientation on the build plate.\n"
|
||||
"When enabled, directions rotate with the model to maintain optimal strength characteristics."
|
||||
"Aligns infill, bridge, ironing, and top/bottom surface directions to follow the model's orientation on the build plate.\n"
|
||||
"When enabled, these directions rotate together with the model so the printed features keep their intended orientation relative to the part, preserving optimal strength and surface characteristics regardless of how the model is placed."
|
||||
msgstr ""
|
||||
|
||||
msgid "Insert solid layers"
|
||||
@@ -12442,6 +12556,17 @@ msgstr ""
|
||||
msgid "layer"
|
||||
msgstr ""
|
||||
|
||||
msgid "First layer fan speed"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Sets an exact fan speed for the first layer, overriding all other cooling settings. Useful for protecting 3D-printed toolhead parts (e.g. Voron-style ABS/ASA ducts) from a hot bed. A small amount of airflow cools the ducts down, without using full cooling that may in certain conditions hurt first-layer adhesion.\n"
|
||||
"From the second layer onwards, normal cooling resumes.\n"
|
||||
"If \"Full fan speed at layer\" is also set, the fan ramps smoothly from this value on the first layer up to your target by the chosen layer.\n"
|
||||
"Only available when \"No cooling for the first\" is 0.\n"
|
||||
"Set to -1 to disable it."
|
||||
msgstr ""
|
||||
|
||||
msgid "Support interface fan speed"
|
||||
msgstr ""
|
||||
|
||||
@@ -13845,6 +13970,9 @@ msgstr ""
|
||||
msgid "Aligned back"
|
||||
msgstr ""
|
||||
|
||||
msgid "Back"
|
||||
msgstr ""
|
||||
|
||||
msgid "Random"
|
||||
msgstr ""
|
||||
|
||||
@@ -14179,6 +14307,18 @@ msgstr ""
|
||||
msgid "If enabled, all printing extruders will be primed at the front edge of the print bed at the start of the print."
|
||||
msgstr ""
|
||||
|
||||
msgid "Toolchange ordering"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Determines the order of tool changes on each layer.\n"
|
||||
"- Default: Starts with the last used extruder to minimize tool changes.\n"
|
||||
"- Cyclic: Uses a fixed tool sequence each layer. This sacrifices speed for better surface quality, as the extra toolchanges allow layers more time to cool."
|
||||
msgstr ""
|
||||
|
||||
msgid "Cyclic"
|
||||
msgstr ""
|
||||
|
||||
msgid "Slice gap closing radius"
|
||||
msgstr ""
|
||||
|
||||
@@ -14188,6 +14328,9 @@ msgstr ""
|
||||
msgid "Slicing Mode"
|
||||
msgstr ""
|
||||
|
||||
msgid "Other"
|
||||
msgstr ""
|
||||
|
||||
msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
|
||||
msgstr ""
|
||||
|
||||
@@ -14579,6 +14722,45 @@ msgstr ""
|
||||
msgid "The number of top solid layers is increased when slicing if the thickness calculated by top shell layers is thinner than this value. This can avoid having too thin a shell when layer height is small. 0 means that this setting is disabled and thickness of top shell is determined simply by the number of top shell layers."
|
||||
msgstr ""
|
||||
|
||||
msgid "Anisotropic surfaces"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Anisotropic patterns on the top and bottom surfaces.\n"
|
||||
"Co-directional printing mode will be applied. For certain patterns, omni-directional filling provides color dispersion when using multi-colored or silk plastics.\n"
|
||||
"This option disable the gap fill.\n"
|
||||
"This option can increase a printing time."
|
||||
msgstr ""
|
||||
|
||||
msgid "Separated infills"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Centers the internal infill of each part on itself, as if it were sliced on its own, instead of on the whole assembly. Parts that touch or overlap are treated as one body and share a center; separate parts (or distinct 3D objects) each get their own.\n"
|
||||
"Useful when an assembly groups several objects that should each keep a consistent, self-centered infill.\n"
|
||||
"Affects line and grid patterns and rotation-template infills.\n"
|
||||
"Patterns locked to global coordinates (Gyroid, Honeycomb, TPMS, ...) are unaffected."
|
||||
msgstr ""
|
||||
|
||||
msgid "Center surface pattern on"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Chooses where the centering point of centered top/bottom surface patterns (Archimedean Chords, Octagram Spiral) is placed.\n"
|
||||
" - Each Surface: centers the pattern on every individual surface region, so each island is symmetric on its own.\n"
|
||||
" - Each Model: centers the pattern on each connected body. Parts that touch or overlap share one center; parts detached from the rest each get their own.\n"
|
||||
" - Each Assembly: uses a single shared center for the whole object or assembly."
|
||||
msgstr ""
|
||||
|
||||
msgid "Each Surface"
|
||||
msgstr ""
|
||||
|
||||
msgid "Each Model"
|
||||
msgstr ""
|
||||
|
||||
msgid "Each Assembly"
|
||||
msgstr ""
|
||||
|
||||
msgid "This is the speed at which traveling is done."
|
||||
msgstr ""
|
||||
|
||||
@@ -14792,6 +14974,14 @@ msgstr ""
|
||||
msgid "Rotate the polyhole every layer."
|
||||
msgstr ""
|
||||
|
||||
msgid "Maximum Polyhole edge count"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Maximum number of polyhole edges\n"
|
||||
"This setting limits the amount of edges a polyhole can have"
|
||||
msgstr ""
|
||||
|
||||
msgid "G-code thumbnails"
|
||||
msgstr ""
|
||||
|
||||
@@ -17018,6 +17208,132 @@ msgstr ""
|
||||
msgid "Connection to printers connected via the print host failed."
|
||||
msgstr ""
|
||||
|
||||
msgid "Detect Creality K-series printer"
|
||||
msgstr ""
|
||||
|
||||
msgid "Click Scan to look for K-series printers on your network."
|
||||
msgstr ""
|
||||
|
||||
msgid "Use Selected"
|
||||
msgstr ""
|
||||
|
||||
msgid "Scanning the LAN for K-series printers... this takes a few seconds."
|
||||
msgstr ""
|
||||
|
||||
msgid "No K-series printers found. Make sure the printer is on the same network and not blocked by Wi-Fi client isolation, then click Scan again."
|
||||
msgstr ""
|
||||
|
||||
#, possible-c-format
|
||||
msgid "Found %zu Creality printer(s). Select one and click Use Selected."
|
||||
msgstr ""
|
||||
|
||||
msgid "Active"
|
||||
msgstr ""
|
||||
|
||||
msgid "Printers"
|
||||
msgstr ""
|
||||
|
||||
msgid "Processes"
|
||||
msgstr ""
|
||||
|
||||
msgid "Show/Hide system information"
|
||||
msgstr ""
|
||||
|
||||
msgid "Copy system information to clipboard"
|
||||
msgstr ""
|
||||
|
||||
msgid "We need information for diagnosing source of the issue. Check wiki page for detailed guide."
|
||||
msgstr ""
|
||||
|
||||
msgid "Pack button collects project file and logs of current session onto a zip file."
|
||||
msgstr ""
|
||||
|
||||
msgid "Any additional visual examples like images or screen recordings might be helpful while reporting the issue."
|
||||
msgstr ""
|
||||
|
||||
msgid "Report issue"
|
||||
msgstr ""
|
||||
|
||||
msgid "Pack"
|
||||
msgstr ""
|
||||
|
||||
msgid "Cleans and rebuilds system profiles cache on next launch"
|
||||
msgstr ""
|
||||
|
||||
msgid "Clean system profiles cache"
|
||||
msgstr ""
|
||||
|
||||
msgid "Clean"
|
||||
msgstr ""
|
||||
|
||||
msgid "Loaded profiles overview"
|
||||
msgstr ""
|
||||
|
||||
msgid "This section shows information for loaded profiles"
|
||||
msgstr ""
|
||||
|
||||
msgid "Exports detailed overview of loaded profiles in json format"
|
||||
msgstr ""
|
||||
|
||||
msgid "Configurations folder"
|
||||
msgstr ""
|
||||
|
||||
msgid "Opens configurations folder"
|
||||
msgstr ""
|
||||
|
||||
msgid "Log level"
|
||||
msgstr ""
|
||||
|
||||
msgid "Stored logs"
|
||||
msgstr ""
|
||||
|
||||
msgid "Packs all stored logs onto a zip file."
|
||||
msgstr ""
|
||||
|
||||
msgid "Profiles"
|
||||
msgstr ""
|
||||
|
||||
msgid "Select NO to close dialog and review project"
|
||||
msgstr ""
|
||||
|
||||
msgid "No project file on current session. Only logs will be included to package"
|
||||
msgstr ""
|
||||
|
||||
msgid "Select NO to close dialog and review project."
|
||||
msgstr ""
|
||||
|
||||
msgid "Please make sure any instances of OrcaSlicer are not running"
|
||||
msgstr ""
|
||||
|
||||
msgid "System folder cannot be deleted because some files are in use by another application. Please close any applications using these files and try again."
|
||||
msgstr ""
|
||||
|
||||
msgid "Failed to delete system folder..."
|
||||
msgstr ""
|
||||
|
||||
msgid "Failed to determine executable path."
|
||||
msgstr ""
|
||||
|
||||
msgid "Failed to launch a new instance."
|
||||
msgstr ""
|
||||
|
||||
msgid "log(s)"
|
||||
msgstr ""
|
||||
|
||||
msgid "Choose where to save the exported JSON file"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Export failed\n"
|
||||
"Please check write permissions or file in use by another application"
|
||||
msgstr ""
|
||||
|
||||
msgid "Choose where to save the exported ZIP file"
|
||||
msgstr ""
|
||||
|
||||
msgid "File already exists. Overwrite?"
|
||||
msgstr ""
|
||||
|
||||
msgid "3DPrinterOS Cloud upload options"
|
||||
msgstr ""
|
||||
|
||||
@@ -17100,6 +17416,19 @@ msgstr ""
|
||||
msgid "Could not connect to MKS"
|
||||
msgstr ""
|
||||
|
||||
msgid "Connection to Moonraker is working correctly."
|
||||
msgstr ""
|
||||
|
||||
msgid "Could not connect to Moonraker"
|
||||
msgstr ""
|
||||
|
||||
msgid "The host responded but it doesn't look like Moonraker (missing result.klippy_state)."
|
||||
msgstr ""
|
||||
|
||||
#, possible-c-format, possible-boost-format
|
||||
msgid "Could not parse Moonraker server response: %s"
|
||||
msgstr ""
|
||||
|
||||
msgid "Connection to OctoPrint is working correctly."
|
||||
msgstr ""
|
||||
|
||||
@@ -17841,6 +18170,12 @@ msgstr ""
|
||||
msgid "Calculating, please wait..."
|
||||
msgstr ""
|
||||
|
||||
msgid "Save these settings as default"
|
||||
msgstr ""
|
||||
|
||||
msgid "If enabled, the values above are stored as the defaults used for future STEP imports (and shown in Preferences)."
|
||||
msgstr ""
|
||||
|
||||
msgid "PresetBundle"
|
||||
msgstr ""
|
||||
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -3,7 +3,7 @@ msgid ""
|
||||
msgstr ""
|
||||
"Project-Id-Version: Orca Slicer\n"
|
||||
"Report-Msgid-Bugs-To: \n"
|
||||
"POT-Creation-Date: 2026-06-28 12:42-0300\n"
|
||||
"POT-Creation-Date: 2026-07-12 12:27-0300\n"
|
||||
"PO-Revision-Date: 2026-06-17 15:44-0300\n"
|
||||
"Last-Translator: Alexandre Folle de Menezes\n"
|
||||
"Language-Team: \n"
|
||||
@@ -159,6 +159,12 @@ msgstr ""
|
||||
msgid "Gap Fill"
|
||||
msgstr ""
|
||||
|
||||
msgid "Vertical"
|
||||
msgstr ""
|
||||
|
||||
msgid "Horizontal"
|
||||
msgstr ""
|
||||
|
||||
#, boost-format
|
||||
msgid "Allows painting only on facets selected by: \"%1%\""
|
||||
msgstr ""
|
||||
@@ -251,12 +257,6 @@ msgstr ""
|
||||
msgid "Height Range"
|
||||
msgstr ""
|
||||
|
||||
msgid "Vertical"
|
||||
msgstr ""
|
||||
|
||||
msgid "Horizontal"
|
||||
msgstr ""
|
||||
|
||||
msgid "Remove painted color"
|
||||
msgstr ""
|
||||
|
||||
@@ -321,6 +321,7 @@ msgstr ""
|
||||
msgid "Optimize orientation"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "Verb"
|
||||
msgid "Scale"
|
||||
msgstr ""
|
||||
|
||||
@@ -330,6 +331,7 @@ msgstr ""
|
||||
msgid "Error: Please close all toolbar menus first"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "inches"
|
||||
msgid "in"
|
||||
msgstr ""
|
||||
|
||||
@@ -363,6 +365,9 @@ msgstr ""
|
||||
msgid "Object operations"
|
||||
msgstr ""
|
||||
|
||||
msgid "Scale"
|
||||
msgstr ""
|
||||
|
||||
msgid "Volume operations"
|
||||
msgstr ""
|
||||
|
||||
@@ -384,25 +389,32 @@ msgstr ""
|
||||
msgid "Reset rotation"
|
||||
msgstr ""
|
||||
|
||||
msgid "Object coordinates"
|
||||
msgid "World"
|
||||
msgstr ""
|
||||
|
||||
msgid "World coordinates"
|
||||
msgid "Object"
|
||||
msgstr ""
|
||||
|
||||
msgid "Translate(Relative)"
|
||||
msgid "Part"
|
||||
msgstr ""
|
||||
|
||||
msgid "Relative"
|
||||
msgstr ""
|
||||
|
||||
msgid "Coordinate system used for transform actions."
|
||||
msgstr ""
|
||||
|
||||
msgid "Absolute"
|
||||
msgstr ""
|
||||
|
||||
msgid "Reset current rotation to the value when open the rotation tool."
|
||||
msgstr ""
|
||||
|
||||
msgid "Rotate (absolute)"
|
||||
msgstr ""
|
||||
|
||||
msgid "Reset current rotation to real zeros."
|
||||
msgstr ""
|
||||
|
||||
msgid "Part coordinates"
|
||||
msgctxt "Noun"
|
||||
msgid "Scale"
|
||||
msgstr ""
|
||||
|
||||
#. TRN - Input label. Be short as possible
|
||||
@@ -508,12 +520,6 @@ msgstr ""
|
||||
msgid "Spacing"
|
||||
msgstr ""
|
||||
|
||||
msgid "Part"
|
||||
msgstr ""
|
||||
|
||||
msgid "Object"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Click to flip the cut plane\n"
|
||||
"Drag to move the cut plane"
|
||||
@@ -1816,23 +1822,30 @@ msgstr ""
|
||||
msgid "The version of Orca Slicer is too low and needs to be updated to the latest version before it can be used normally."
|
||||
msgstr ""
|
||||
|
||||
msgid "Cloud sync conflict:"
|
||||
msgstr ""
|
||||
|
||||
#, c-format, boost-format
|
||||
msgid "Cloud sync conflict for preset \"%s\":"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Cloud sync conflict: this preset has a newer version in OrcaCloud.\n"
|
||||
"This preset has a newer version in OrcaCloud.\n"
|
||||
"Pull downloads the cloud copy. Force push overwrites it with your local preset."
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Cloud sync conflict: a preset with this name already exists in OrcaCloud.\n"
|
||||
"A preset with this name already exists in OrcaCloud.\n"
|
||||
"Pull downloads the cloud copy. Force push overwrites it with your local preset."
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Cloud sync conflict: a preset with the same name was previously deleted from the cloud.\n"
|
||||
"A preset with the same name was previously deleted from the cloud.\n"
|
||||
"Delete will delete your local preset. Force push overwrites it with your local preset."
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Cloud sync conflict: there was an unexpected or unidentified preset conflict.\n"
|
||||
"There was an unexpected or unidentified preset conflict.\n"
|
||||
"Pull downloads the cloud copy. Force push overwrites it with your local preset."
|
||||
msgstr ""
|
||||
|
||||
@@ -1841,6 +1854,12 @@ msgid ""
|
||||
"Do you want to continue?"
|
||||
msgstr ""
|
||||
|
||||
#, c-format, boost-format
|
||||
msgid ""
|
||||
"Force push will overwrite the cloud copy of preset \"%s\" with your local changes.\n"
|
||||
"Do you want to continue?"
|
||||
msgstr ""
|
||||
|
||||
msgid "Resolve cloud sync conflict"
|
||||
msgstr ""
|
||||
|
||||
@@ -1908,7 +1927,8 @@ msgstr ""
|
||||
msgid "Sync user presets"
|
||||
msgstr ""
|
||||
|
||||
msgid "The preset content is too large to sync to the cloud (exceeds 1MB). Please reduce the preset size by removing custom configurations or use it locally only."
|
||||
#, c-format, boost-format
|
||||
msgid "The preset \"%s\" is too large to sync to the cloud (exceeds 1MB). Please reduce the preset size by removing custom configurations or use it locally only."
|
||||
msgstr ""
|
||||
|
||||
#, c-format, boost-format
|
||||
@@ -2118,6 +2138,9 @@ msgstr ""
|
||||
msgid "OrcaSliced Combo"
|
||||
msgstr ""
|
||||
|
||||
msgid "Orca Badge"
|
||||
msgstr ""
|
||||
|
||||
msgid "Orca Tolerance Test"
|
||||
msgstr ""
|
||||
|
||||
@@ -3480,6 +3503,7 @@ msgstr ""
|
||||
msgid "Save"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "Navigation"
|
||||
msgid "Back"
|
||||
msgstr ""
|
||||
|
||||
@@ -4762,6 +4786,7 @@ msgstr ""
|
||||
msgid "Color change"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "Noun"
|
||||
msgid "Print"
|
||||
msgstr ""
|
||||
|
||||
@@ -4917,11 +4942,15 @@ msgstr ""
|
||||
msgid "Align to Y axis"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "Camera"
|
||||
msgctxt "Camera View"
|
||||
msgid "Back"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "Camera View"
|
||||
msgid "Left"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "Camera"
|
||||
msgctxt "Camera View"
|
||||
msgid "Right"
|
||||
msgstr ""
|
||||
|
||||
@@ -5000,6 +5029,9 @@ msgstr ""
|
||||
msgid "Outline"
|
||||
msgstr ""
|
||||
|
||||
msgid "Wireframe"
|
||||
msgstr ""
|
||||
|
||||
msgid "Realistic View"
|
||||
msgstr ""
|
||||
|
||||
@@ -5235,6 +5267,10 @@ msgstr ""
|
||||
msgid "Export G-code file"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "Verb"
|
||||
msgid "Print"
|
||||
msgstr ""
|
||||
|
||||
msgid "Export plate sliced file"
|
||||
msgstr ""
|
||||
|
||||
@@ -5408,15 +5444,6 @@ msgstr ""
|
||||
msgid "Export"
|
||||
msgstr ""
|
||||
|
||||
msgid "Sync Presets"
|
||||
msgstr ""
|
||||
|
||||
msgid "Pull and apply the latest presets from OrcaCloud"
|
||||
msgstr ""
|
||||
|
||||
msgid "You must be logged in to sync presets from cloud."
|
||||
msgstr ""
|
||||
|
||||
msgid "Quit"
|
||||
msgstr ""
|
||||
|
||||
@@ -5531,6 +5558,15 @@ msgstr ""
|
||||
msgid "Preset Bundle"
|
||||
msgstr ""
|
||||
|
||||
msgid "Sync Presets"
|
||||
msgstr ""
|
||||
|
||||
msgid "Pull and apply the latest presets from OrcaCloud"
|
||||
msgstr ""
|
||||
|
||||
msgid "You must be logged in to sync presets from cloud."
|
||||
msgstr ""
|
||||
|
||||
msgid "Syncing presets from cloud…"
|
||||
msgstr ""
|
||||
|
||||
@@ -7514,6 +7550,45 @@ msgstr ""
|
||||
msgid "Choose Download Directory"
|
||||
msgstr ""
|
||||
|
||||
msgid "(Latest)"
|
||||
msgstr ""
|
||||
|
||||
msgid "Network plug-in switched successfully."
|
||||
msgstr ""
|
||||
|
||||
msgid "Success"
|
||||
msgstr ""
|
||||
|
||||
msgid "Failed to load network plug-in. Please restart the application."
|
||||
msgstr ""
|
||||
|
||||
#, c-format, boost-format
|
||||
msgid ""
|
||||
"You've selected network plug-in version %s.\n"
|
||||
"\n"
|
||||
"Would you like to download and install this version now?\n"
|
||||
"\n"
|
||||
"Note: The application may need to restart after installation."
|
||||
msgstr ""
|
||||
|
||||
msgid "Download Network Plug-in"
|
||||
msgstr ""
|
||||
|
||||
msgid "Reload the network plug-in without restarting the application"
|
||||
msgstr ""
|
||||
|
||||
msgid "Network plug-in reloaded successfully."
|
||||
msgstr ""
|
||||
|
||||
msgid "Reload"
|
||||
msgstr ""
|
||||
|
||||
msgid "Failed to reload network plug-in. Please restart the application."
|
||||
msgstr ""
|
||||
|
||||
msgid "Reload Failed"
|
||||
msgstr ""
|
||||
|
||||
msgid "Associate"
|
||||
msgstr ""
|
||||
|
||||
@@ -7568,12 +7643,6 @@ msgstr ""
|
||||
msgid "Show the splash screen during startup."
|
||||
msgstr ""
|
||||
|
||||
msgid "Show shared profiles notification"
|
||||
msgstr ""
|
||||
|
||||
msgid "Show a notification with a link to browse shared profiles when the selected printer is changed."
|
||||
msgstr ""
|
||||
|
||||
msgid "Use window buttons on left side"
|
||||
msgstr ""
|
||||
|
||||
@@ -7604,6 +7673,12 @@ msgstr ""
|
||||
msgid "Should printer/filament/process settings be loaded when opening a 3MF file?"
|
||||
msgstr ""
|
||||
|
||||
msgid "Auto backup"
|
||||
msgstr ""
|
||||
|
||||
msgid "Backup your project periodically to help with restoring from an occasional crash."
|
||||
msgstr ""
|
||||
|
||||
msgid "Maximum recent files"
|
||||
msgstr ""
|
||||
|
||||
@@ -7622,10 +7697,51 @@ msgstr ""
|
||||
msgid "If enabled, a parameter settings dialog will appear during STEP file import."
|
||||
msgstr ""
|
||||
|
||||
msgid "Auto backup"
|
||||
msgid "STEP importing: linear deflection"
|
||||
msgstr ""
|
||||
|
||||
msgid "Backup your project periodically to help with restoring from an occasional crash."
|
||||
msgid ""
|
||||
"Linear deflection used when meshing imported STEP files.\n"
|
||||
"Smaller values produce higher-quality meshes but increase processing time.\n"
|
||||
"Used as the default in the import dialog, or directly when the import dialog is disabled.\n"
|
||||
"Default: 0.003 mm."
|
||||
msgstr ""
|
||||
|
||||
msgid "STEP importing: angle deflection"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Angle deflection used when meshing imported STEP files.\n"
|
||||
"Smaller values produce higher-quality meshes but increase processing time.\n"
|
||||
"Used as the default in the import dialog, or directly when the import dialog is disabled.\n"
|
||||
"Default: 0.5."
|
||||
msgstr ""
|
||||
|
||||
msgid "STEP importing: Split into multiple objects"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"If enabled, compound and compsolid shapes in imported STEP files are split into multiple objects.\n"
|
||||
"Used as the default in the import dialog, or directly when the import dialog is disabled.\n"
|
||||
"Default: disabled."
|
||||
msgstr ""
|
||||
|
||||
msgid "Quality level for Draco export"
|
||||
msgstr ""
|
||||
|
||||
msgid "bits"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Controls the quantization bit depth used when compressing the mesh to Draco format.\n"
|
||||
"0 = lossless compression (geometry is preserved at full precision). Valid lossy values range from 8 to 30.\n"
|
||||
"Lower values produce smaller files but lose more geometric detail; higher values preserve more detail at the cost of larger files."
|
||||
msgstr ""
|
||||
|
||||
msgid "Store full source file paths in projects"
|
||||
msgstr ""
|
||||
|
||||
msgid "If enabled, saved projects store the absolute path to imported source files (STEP/STL/...), so \"Reload from disk\" still works when the source file is kept in a different folder than the project. If disabled, only the filename is stored, which keeps projects portable and avoids embedding absolute paths."
|
||||
msgstr ""
|
||||
|
||||
msgid "Preset"
|
||||
@@ -7658,6 +7774,12 @@ msgstr ""
|
||||
msgid "Optimizes filament area maximum height by chosen filament count."
|
||||
msgstr ""
|
||||
|
||||
msgid "Show shared profiles notification"
|
||||
msgstr ""
|
||||
|
||||
msgid "Show a notification with a link to browse shared profiles when the selected printer is changed."
|
||||
msgstr ""
|
||||
|
||||
msgid "Features"
|
||||
msgstr ""
|
||||
|
||||
@@ -7670,18 +7792,6 @@ msgstr ""
|
||||
msgid "Pop up to select filament grouping mode"
|
||||
msgstr ""
|
||||
|
||||
msgid "Quality level for Draco export"
|
||||
msgstr ""
|
||||
|
||||
msgid "bits"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Controls the quantization bit depth used when compressing the mesh to Draco format.\n"
|
||||
"0 = lossless compression (geometry is preserved at full precision). Valid lossy values range from 8 to 30.\n"
|
||||
"Lower values produce smaller files but lose more geometric detail; higher values preserve more detail at the cost of larger files."
|
||||
msgstr ""
|
||||
|
||||
msgid "Behaviour"
|
||||
msgstr ""
|
||||
|
||||
@@ -7906,18 +8016,6 @@ msgstr ""
|
||||
msgid "Auto sync user presets (Printer/Filament/Process)"
|
||||
msgstr ""
|
||||
|
||||
msgid "Update built-in presets automatically."
|
||||
msgstr ""
|
||||
|
||||
msgid "Use encrypted file for token storage"
|
||||
msgstr ""
|
||||
|
||||
msgid "Store authentication tokens in an encrypted file instead of the system keychain. (Requires restart)"
|
||||
msgstr ""
|
||||
|
||||
msgid "Filament Sync Options"
|
||||
msgstr ""
|
||||
|
||||
msgid "Filament sync mode"
|
||||
msgstr ""
|
||||
|
||||
@@ -7930,6 +8028,15 @@ msgstr ""
|
||||
msgid "Color only"
|
||||
msgstr ""
|
||||
|
||||
msgid "Update built-in presets automatically."
|
||||
msgstr ""
|
||||
|
||||
msgid "Use encrypted file for token storage"
|
||||
msgstr ""
|
||||
|
||||
msgid "Store authentication tokens in an encrypted file instead of the system keychain. (Requires restart)"
|
||||
msgstr ""
|
||||
|
||||
msgid "Bambu network plug-in"
|
||||
msgstr ""
|
||||
|
||||
@@ -7942,30 +8049,6 @@ msgstr ""
|
||||
msgid "Select the network plug-in version to use"
|
||||
msgstr ""
|
||||
|
||||
msgid "(Latest)"
|
||||
msgstr ""
|
||||
|
||||
msgid "Network plug-in switched successfully."
|
||||
msgstr ""
|
||||
|
||||
msgid "Success"
|
||||
msgstr ""
|
||||
|
||||
msgid "Failed to load network plug-in. Please restart the application."
|
||||
msgstr ""
|
||||
|
||||
#, c-format, boost-format
|
||||
msgid ""
|
||||
"You've selected network plug-in version %s.\n"
|
||||
"\n"
|
||||
"Would you like to download and install this version now?\n"
|
||||
"\n"
|
||||
"Note: The application may need to restart after installation."
|
||||
msgstr ""
|
||||
|
||||
msgid "Download Network Plug-in"
|
||||
msgstr ""
|
||||
|
||||
msgid "Associate files to OrcaSlicer"
|
||||
msgstr ""
|
||||
|
||||
@@ -8008,7 +8091,16 @@ msgstr ""
|
||||
msgid "Skip AMS blacklist check"
|
||||
msgstr ""
|
||||
|
||||
msgid "(Experimental) Keep painted feature after mesh change"
|
||||
msgid "Show unsupported presets"
|
||||
msgstr ""
|
||||
|
||||
msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
|
||||
msgstr ""
|
||||
|
||||
msgid "Experimental Features"
|
||||
msgstr ""
|
||||
|
||||
msgid "Keep painted feature after mesh change"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
@@ -8016,12 +8108,6 @@ msgid ""
|
||||
"Highly experimental! Slow and may create artifact."
|
||||
msgstr ""
|
||||
|
||||
msgid "Show unsupported presets"
|
||||
msgstr ""
|
||||
|
||||
msgid "Show incompatible/unsupported presets in the printer and filament dropdown lists. These presets cannot be selected."
|
||||
msgstr ""
|
||||
|
||||
msgid "Allow Abnormal Storage"
|
||||
msgstr ""
|
||||
|
||||
@@ -8048,24 +8134,6 @@ msgstr ""
|
||||
msgid "trace"
|
||||
msgstr ""
|
||||
|
||||
msgid "Network plug-in"
|
||||
msgstr ""
|
||||
|
||||
msgid "Reload"
|
||||
msgstr ""
|
||||
|
||||
msgid "Reload the network plug-in without restarting the application"
|
||||
msgstr ""
|
||||
|
||||
msgid "Network plug-in reloaded successfully."
|
||||
msgstr ""
|
||||
|
||||
msgid "Failed to reload network plug-in. Please restart the application."
|
||||
msgstr ""
|
||||
|
||||
msgid "Reload Failed"
|
||||
msgstr ""
|
||||
|
||||
msgid "Debug"
|
||||
msgstr ""
|
||||
|
||||
@@ -8081,24 +8149,6 @@ msgstr ""
|
||||
msgid "Preferences sync"
|
||||
msgstr ""
|
||||
|
||||
msgid "View control settings"
|
||||
msgstr ""
|
||||
|
||||
msgid "Rotate view"
|
||||
msgstr ""
|
||||
|
||||
msgid "Pan view"
|
||||
msgstr ""
|
||||
|
||||
msgid "Zoom view"
|
||||
msgstr ""
|
||||
|
||||
msgid "Other"
|
||||
msgstr ""
|
||||
|
||||
msgid "Reverse scroll direction while zooming"
|
||||
msgstr ""
|
||||
|
||||
msgid "Enable SSL(MQTT)"
|
||||
msgstr ""
|
||||
|
||||
@@ -9797,11 +9847,7 @@ msgstr ""
|
||||
msgid "Successfully synchronized nozzle and AMS number information."
|
||||
msgstr ""
|
||||
|
||||
msgid "Continue to sync filaments"
|
||||
msgstr ""
|
||||
|
||||
msgctxt "Sync_Nozzle_AMS"
|
||||
msgid "Cancel"
|
||||
msgid "Do you want to continue to sync filaments?"
|
||||
msgstr ""
|
||||
|
||||
msgid "Successfully synchronized filament color from printer."
|
||||
@@ -11037,7 +11083,7 @@ msgid ""
|
||||
"If left to zero, the bridging angle will be calculated automatically for each specific bridge.\n"
|
||||
"Otherwise the provided angle will be used according to:\n"
|
||||
" - The absolute coordinates\n"
|
||||
" - The absolute coordinates + Model rotation: If Align infill direction to model is enabled\n"
|
||||
" - The absolute coordinates + Model rotation: If Align directions to model is enabled\n"
|
||||
" - The optimal automatic angle + this value: If 'Relative Bridge Angle' is enabled\n"
|
||||
"\n"
|
||||
"Use 180° for zero absolute angle."
|
||||
@@ -11051,7 +11097,7 @@ msgid ""
|
||||
"If left to zero, the bridging angle will be calculated automatically for each specific bridge.\n"
|
||||
"Otherwise the provided angle will be used according to:\n"
|
||||
" - The absolute coordinates\n"
|
||||
" - The absolute coordinates + Model rotation: If Align infill direction to model is enabled\n"
|
||||
" - The absolute coordinates + Model rotation: If Align directions to model is enabled\n"
|
||||
" - The optimal automatic angle + this value: If 'Relative Bridge Angle' is enabled\n"
|
||||
"\n"
|
||||
"Use 180° for zero absolute angle."
|
||||
@@ -11675,6 +11721,42 @@ msgstr ""
|
||||
msgid "Density of top surface layer. A value of 100% creates a fully solid, smooth top layer. Reducing this value results in a textured top surface, according to the chosen top surface pattern. A value of 0% will result in only the walls on the top layer being created. Intended for aesthetic or functional purposes, not to fix issues such as over-extrusion."
|
||||
msgstr ""
|
||||
|
||||
msgid "Top surface expansion"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Expands the top surfaces by this distance to connect distinct top surfaces and fill gaps.\n"
|
||||
"Useful for cases where the top surface is interrupted by a raised feature, such as text on a plane.Expanding it removes the holes beneath these features and creates a continuous path with a better finish for printing on top.The expansion is applied to the original top surface, before any other processing such as bridging or overhang detection."
|
||||
msgstr ""
|
||||
|
||||
msgid "Top expansion wall margin"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Using “Top surface expansion” may cause a surface that did not previously touch the model's outer walls to now do so.\n"
|
||||
"This can cause contraction marks (such as the hull line) on the outer walls.\n"
|
||||
"By adding a small margin, this contraction will not occur directly on the walls, thereby preventing a visible mark."
|
||||
msgstr ""
|
||||
|
||||
msgid "Top expansion direction"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Direction in which the top surface expansion grows.\n"
|
||||
" - Inward grows into the holes and gaps left by features rising from the middle of a top surface.\n"
|
||||
" - Outward grows the outer edge of the surface, connecting surfaces separated by features that can divide a surface, such as a lattice pattern.\n"
|
||||
" - Inward and Outward does both."
|
||||
msgstr ""
|
||||
|
||||
msgid "Inward and Outward"
|
||||
msgstr ""
|
||||
|
||||
msgid "Inward"
|
||||
msgstr ""
|
||||
|
||||
msgid "Outward"
|
||||
msgstr ""
|
||||
|
||||
msgid "Bottom surface pattern"
|
||||
msgstr ""
|
||||
|
||||
@@ -11713,6 +11795,18 @@ msgstr ""
|
||||
msgid "This sets the threshold for small perimeter length. Default threshold is 0mm."
|
||||
msgstr ""
|
||||
|
||||
msgid "Small support perimeters"
|
||||
msgstr ""
|
||||
|
||||
msgid "Same as \"Small perimeters\", but for supports. This separate setting will affect the speed of support for areas <= `small_support_perimeter_threshold`. If expressed as a percentage (for example: 80%), it will be calculated on the support or support interface speed setting above. Set to zero for auto."
|
||||
msgstr ""
|
||||
|
||||
msgid "Small support perimeters threshold"
|
||||
msgstr ""
|
||||
|
||||
msgid "This sets the threshold for small support perimeter length. The default threshold is 0mm."
|
||||
msgstr ""
|
||||
|
||||
msgid "Walls printing order"
|
||||
msgstr ""
|
||||
|
||||
@@ -11865,21 +11959,25 @@ msgid ""
|
||||
"3. Enter the triplets of PA values, Flow and Accelerations in the text box here and save your filament profile."
|
||||
msgstr ""
|
||||
|
||||
msgid "Enable adaptive pressure advance for overhangs (beta)"
|
||||
msgid "Enable adaptive pressure advance within features (beta)"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Enable adaptive PA for overhangs as well as when flow changes within the same feature. This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues on the external surfaces before and after overhangs.\n"
|
||||
"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects."
|
||||
msgstr ""
|
||||
|
||||
msgid "Pressure advance for bridges"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Pressure advance value for bridges. Set to 0 to disable.\n"
|
||||
"Enable adaptive PA whenever there are flow changes in a feature, such as line width changes in a corner or overhangs.\n"
|
||||
"\n"
|
||||
"A lower PA value when printing bridges helps reduce the appearance of slight under extrusion immediately after bridges. This is caused by the pressure drop in the nozzle when printing in the air and a lower PA helps counteract this."
|
||||
"Not compatible with Prusa printers as they pause to process PA changes, which causes delays and defects.\n"
|
||||
"\n"
|
||||
"This is an experimental option, as if the PA profile is not set accurately, it will cause uniformity issues."
|
||||
msgstr ""
|
||||
|
||||
msgid "Static pressure advance for bridges"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Static pressure advance value for bridges. Set to 0 to apply the same pressure advance as \n"
|
||||
"equivalent walls (using adaptive settings if enabled).\n"
|
||||
"\n"
|
||||
"A lower PA value when printing bridges helps reduce the appearance of slight under-extrusion immediately after bridges. This is caused by the pressure drop in the nozzle when printing in the air and a lower PA helps counteract this."
|
||||
msgstr ""
|
||||
|
||||
msgid "Default line width if other line widths are set to 0. If expressed as a %, it will be computed over the nozzle diameter."
|
||||
@@ -12236,6 +12334,22 @@ msgstr ""
|
||||
msgid "Angle for solid infill pattern, which controls the start or main direction of line."
|
||||
msgstr ""
|
||||
|
||||
msgid "Top layer direction"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Fixed angle for the top solid infill and ironing lines.\n"
|
||||
"Set to -1 to follow the default solid infill direction."
|
||||
msgstr ""
|
||||
|
||||
msgid "Bottom layer direction"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Fixed angle for the bottom solid infill lines.\n"
|
||||
"Set to -1 to follow the default solid infill direction."
|
||||
msgstr ""
|
||||
|
||||
msgid "Sparse infill density"
|
||||
msgstr ""
|
||||
|
||||
@@ -12243,12 +12357,12 @@ msgstr ""
|
||||
msgid "Density of internal sparse infill, 100% turns all sparse infill into solid infill and internal solid infill pattern will be used."
|
||||
msgstr ""
|
||||
|
||||
msgid "Align infill direction to model"
|
||||
msgid "Align directions to model"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Aligns infill, bridge, ironing and surface fill directions to follow the model's orientation on the build plate.\n"
|
||||
"When enabled, directions rotate with the model to maintain optimal strength characteristics."
|
||||
"Aligns infill, bridge, ironing, and top/bottom surface directions to follow the model's orientation on the build plate.\n"
|
||||
"When enabled, these directions rotate together with the model so the printed features keep their intended orientation relative to the part, preserving optimal strength and surface characteristics regardless of how the model is placed."
|
||||
msgstr ""
|
||||
|
||||
msgid "Insert solid layers"
|
||||
@@ -12438,6 +12552,17 @@ msgstr ""
|
||||
msgid "layer"
|
||||
msgstr ""
|
||||
|
||||
msgid "First layer fan speed"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Sets an exact fan speed for the first layer, overriding all other cooling settings. Useful for protecting 3D-printed toolhead parts (e.g. Voron-style ABS/ASA ducts) from a hot bed. A small amount of airflow cools the ducts down, without using full cooling that may in certain conditions hurt first-layer adhesion.\n"
|
||||
"From the second layer onwards, normal cooling resumes.\n"
|
||||
"If \"Full fan speed at layer\" is also set, the fan ramps smoothly from this value on the first layer up to your target by the chosen layer.\n"
|
||||
"Only available when \"No cooling for the first\" is 0.\n"
|
||||
"Set to -1 to disable it."
|
||||
msgstr ""
|
||||
|
||||
msgid "Support interface fan speed"
|
||||
msgstr ""
|
||||
|
||||
@@ -13841,6 +13966,9 @@ msgstr ""
|
||||
msgid "Aligned back"
|
||||
msgstr ""
|
||||
|
||||
msgid "Back"
|
||||
msgstr ""
|
||||
|
||||
msgid "Random"
|
||||
msgstr ""
|
||||
|
||||
@@ -14175,6 +14303,18 @@ msgstr ""
|
||||
msgid "If enabled, all printing extruders will be primed at the front edge of the print bed at the start of the print."
|
||||
msgstr ""
|
||||
|
||||
msgid "Toolchange ordering"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Determines the order of tool changes on each layer.\n"
|
||||
"- Default: Starts with the last used extruder to minimize tool changes.\n"
|
||||
"- Cyclic: Uses a fixed tool sequence each layer. This sacrifices speed for better surface quality, as the extra toolchanges allow layers more time to cool."
|
||||
msgstr ""
|
||||
|
||||
msgid "Cyclic"
|
||||
msgstr ""
|
||||
|
||||
msgid "Slice gap closing radius"
|
||||
msgstr ""
|
||||
|
||||
@@ -14184,6 +14324,9 @@ msgstr ""
|
||||
msgid "Slicing Mode"
|
||||
msgstr ""
|
||||
|
||||
msgid "Other"
|
||||
msgstr ""
|
||||
|
||||
msgid "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to close all holes in the model."
|
||||
msgstr ""
|
||||
|
||||
@@ -14575,6 +14718,45 @@ msgstr ""
|
||||
msgid "The number of top solid layers is increased when slicing if the thickness calculated by top shell layers is thinner than this value. This can avoid having too thin a shell when layer height is small. 0 means that this setting is disabled and thickness of top shell is determined simply by the number of top shell layers."
|
||||
msgstr ""
|
||||
|
||||
msgid "Anisotropic surfaces"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Anisotropic patterns on the top and bottom surfaces.\n"
|
||||
"Co-directional printing mode will be applied. For certain patterns, omni-directional filling provides color dispersion when using multi-colored or silk plastics.\n"
|
||||
"This option disable the gap fill.\n"
|
||||
"This option can increase a printing time."
|
||||
msgstr ""
|
||||
|
||||
msgid "Separated infills"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Centers the internal infill of each part on itself, as if it were sliced on its own, instead of on the whole assembly. Parts that touch or overlap are treated as one body and share a center; separate parts (or distinct 3D objects) each get their own.\n"
|
||||
"Useful when an assembly groups several objects that should each keep a consistent, self-centered infill.\n"
|
||||
"Affects line and grid patterns and rotation-template infills.\n"
|
||||
"Patterns locked to global coordinates (Gyroid, Honeycomb, TPMS, ...) are unaffected."
|
||||
msgstr ""
|
||||
|
||||
msgid "Center surface pattern on"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Chooses where the centering point of centered top/bottom surface patterns (Archimedean Chords, Octagram Spiral) is placed.\n"
|
||||
" - Each Surface: centers the pattern on every individual surface region, so each island is symmetric on its own.\n"
|
||||
" - Each Model: centers the pattern on each connected body. Parts that touch or overlap share one center; parts detached from the rest each get their own.\n"
|
||||
" - Each Assembly: uses a single shared center for the whole object or assembly."
|
||||
msgstr ""
|
||||
|
||||
msgid "Each Surface"
|
||||
msgstr ""
|
||||
|
||||
msgid "Each Model"
|
||||
msgstr ""
|
||||
|
||||
msgid "Each Assembly"
|
||||
msgstr ""
|
||||
|
||||
msgid "This is the speed at which traveling is done."
|
||||
msgstr ""
|
||||
|
||||
@@ -14788,6 +14970,14 @@ msgstr ""
|
||||
msgid "Rotate the polyhole every layer."
|
||||
msgstr ""
|
||||
|
||||
msgid "Maximum Polyhole edge count"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Maximum number of polyhole edges\n"
|
||||
"This setting limits the amount of edges a polyhole can have"
|
||||
msgstr ""
|
||||
|
||||
msgid "G-code thumbnails"
|
||||
msgstr ""
|
||||
|
||||
@@ -17014,6 +17204,132 @@ msgstr ""
|
||||
msgid "Connection to printers connected via the print host failed."
|
||||
msgstr ""
|
||||
|
||||
msgid "Detect Creality K-series printer"
|
||||
msgstr ""
|
||||
|
||||
msgid "Click Scan to look for K-series printers on your network."
|
||||
msgstr ""
|
||||
|
||||
msgid "Use Selected"
|
||||
msgstr ""
|
||||
|
||||
msgid "Scanning the LAN for K-series printers... this takes a few seconds."
|
||||
msgstr ""
|
||||
|
||||
msgid "No K-series printers found. Make sure the printer is on the same network and not blocked by Wi-Fi client isolation, then click Scan again."
|
||||
msgstr ""
|
||||
|
||||
#, c-format
|
||||
msgid "Found %zu Creality printer(s). Select one and click Use Selected."
|
||||
msgstr ""
|
||||
|
||||
msgid "Active"
|
||||
msgstr ""
|
||||
|
||||
msgid "Printers"
|
||||
msgstr ""
|
||||
|
||||
msgid "Processes"
|
||||
msgstr ""
|
||||
|
||||
msgid "Show/Hide system information"
|
||||
msgstr ""
|
||||
|
||||
msgid "Copy system information to clipboard"
|
||||
msgstr ""
|
||||
|
||||
msgid "We need information for diagnosing source of the issue. Check wiki page for detailed guide."
|
||||
msgstr ""
|
||||
|
||||
msgid "Pack button collects project file and logs of current session onto a zip file."
|
||||
msgstr ""
|
||||
|
||||
msgid "Any additional visual examples like images or screen recordings might be helpful while reporting the issue."
|
||||
msgstr ""
|
||||
|
||||
msgid "Report issue"
|
||||
msgstr ""
|
||||
|
||||
msgid "Pack"
|
||||
msgstr ""
|
||||
|
||||
msgid "Cleans and rebuilds system profiles cache on next launch"
|
||||
msgstr ""
|
||||
|
||||
msgid "Clean system profiles cache"
|
||||
msgstr ""
|
||||
|
||||
msgid "Clean"
|
||||
msgstr ""
|
||||
|
||||
msgid "Loaded profiles overview"
|
||||
msgstr ""
|
||||
|
||||
msgid "This section shows information for loaded profiles"
|
||||
msgstr ""
|
||||
|
||||
msgid "Exports detailed overview of loaded profiles in json format"
|
||||
msgstr ""
|
||||
|
||||
msgid "Configurations folder"
|
||||
msgstr ""
|
||||
|
||||
msgid "Opens configurations folder"
|
||||
msgstr ""
|
||||
|
||||
msgid "Log level"
|
||||
msgstr ""
|
||||
|
||||
msgid "Stored logs"
|
||||
msgstr ""
|
||||
|
||||
msgid "Packs all stored logs onto a zip file."
|
||||
msgstr ""
|
||||
|
||||
msgid "Profiles"
|
||||
msgstr ""
|
||||
|
||||
msgid "Select NO to close dialog and review project"
|
||||
msgstr ""
|
||||
|
||||
msgid "No project file on current session. Only logs will be included to package"
|
||||
msgstr ""
|
||||
|
||||
msgid "Select NO to close dialog and review project."
|
||||
msgstr ""
|
||||
|
||||
msgid "Please make sure any instances of OrcaSlicer are not running"
|
||||
msgstr ""
|
||||
|
||||
msgid "System folder cannot be deleted because some files are in use by another application. Please close any applications using these files and try again."
|
||||
msgstr ""
|
||||
|
||||
msgid "Failed to delete system folder..."
|
||||
msgstr ""
|
||||
|
||||
msgid "Failed to determine executable path."
|
||||
msgstr ""
|
||||
|
||||
msgid "Failed to launch a new instance."
|
||||
msgstr ""
|
||||
|
||||
msgid "log(s)"
|
||||
msgstr ""
|
||||
|
||||
msgid "Choose where to save the exported JSON file"
|
||||
msgstr ""
|
||||
|
||||
msgid ""
|
||||
"Export failed\n"
|
||||
"Please check write permissions or file in use by another application"
|
||||
msgstr ""
|
||||
|
||||
msgid "Choose where to save the exported ZIP file"
|
||||
msgstr ""
|
||||
|
||||
msgid "File already exists. Overwrite?"
|
||||
msgstr ""
|
||||
|
||||
msgid "3DPrinterOS Cloud upload options"
|
||||
msgstr ""
|
||||
|
||||
@@ -17096,6 +17412,19 @@ msgstr ""
|
||||
msgid "Could not connect to MKS"
|
||||
msgstr ""
|
||||
|
||||
msgid "Connection to Moonraker is working correctly."
|
||||
msgstr ""
|
||||
|
||||
msgid "Could not connect to Moonraker"
|
||||
msgstr ""
|
||||
|
||||
msgid "The host responded but it doesn't look like Moonraker (missing result.klippy_state)."
|
||||
msgstr ""
|
||||
|
||||
#, c-format, boost-format
|
||||
msgid "Could not parse Moonraker server response: %s"
|
||||
msgstr ""
|
||||
|
||||
msgid "Connection to OctoPrint is working correctly."
|
||||
msgstr ""
|
||||
|
||||
@@ -17837,6 +18166,12 @@ msgstr ""
|
||||
msgid "Calculating, please wait..."
|
||||
msgstr ""
|
||||
|
||||
msgid "Save these settings as default"
|
||||
msgstr ""
|
||||
|
||||
msgid "If enabled, the values above are stored as the defaults used for future STEP imports (and shown in Preferences)."
|
||||
msgstr ""
|
||||
|
||||
msgid "PresetBundle"
|
||||
msgstr ""
|
||||
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -97,6 +97,7 @@ src/slic3r/GUI/Widgets/FilamentLoad.cpp
|
||||
src/slic3r/GUI/Widgets/TempInput.cpp
|
||||
src/slic3r/GUI/Widgets/CheckList.cpp
|
||||
src/slic3r/GUI/Widgets/SwitchButton.cpp
|
||||
src/slic3r/GUI/Widgets/ProgressDialog.cpp
|
||||
src/slic3r/GUI/ImGuiWrapper.cpp
|
||||
src/slic3r/GUI/Jobs/ArrangeJob.cpp
|
||||
src/slic3r/GUI/Jobs/OrientJob.cpp
|
||||
@@ -227,11 +228,14 @@ src/slic3r/GUI/CreatePresetsDialog.cpp
|
||||
src/slic3r/GUI/DailyTips.cpp
|
||||
src/slic3r/Utils/CalibUtils.cpp
|
||||
src/slic3r/GUI/PhysicalPrinterDialog.cpp
|
||||
src/slic3r/GUI/CrealityDiscoveryDialog.cpp
|
||||
src/slic3r/GUI/TroubleshootDialog.cpp
|
||||
src/slic3r/Utils/3DPrinterOS.cpp
|
||||
src/slic3r/Utils/AstroBox.cpp
|
||||
src/slic3r/Utils/Duet.cpp
|
||||
src/slic3r/Utils/FlashAir.cpp
|
||||
src/slic3r/Utils/MKS.cpp
|
||||
src/slic3r/Utils/Moonraker.cpp
|
||||
src/slic3r/Utils/OctoPrint.cpp
|
||||
src/slic3r/Utils/Repetier.cpp
|
||||
src/slic3r/Utils/ProfileDescription.hpp
|
||||
|
||||
+5511
-5341
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
+1313
-659
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
Binary file not shown.
Binary file not shown.
Binary file not shown.
Binary file not shown.
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -1,3 +1,3 @@
|
||||
<svg width="19" height="20" viewBox="0 0 19 20" fill="none" xmlns="http://www.w3.org/2000/svg">
|
||||
<path d="M12.9742 9.65669C13.2353 9.91782 13.2353 10.3401 12.9742 10.5984L7.64038 15.935C7.37924 16.1961 6.95698 16.1961 6.69863 15.935C6.44027 15.6739 6.43749 15.2516 6.69863 14.9933L11.5602 10.1317L6.69585 5.26742C6.43472 5.00628 6.43472 4.58403 6.69585 4.32567C6.95698 4.06731 7.37924 4.06454 7.6376 4.32567L12.9742 9.65669Z" fill="#009688"/>
|
||||
<path d="M12.9742 9.65669C13.2353 9.91782 13.2353 10.3401 12.9742 10.5984L7.64038 15.935C7.37924 16.1961 6.95698 16.1961 6.69863 15.935C6.44027 15.6739 6.43749 15.2516 6.69863 14.9933L11.5602 10.1317L6.69585 5.26742C6.43472 5.00628 6.43472 4.58403 6.69585 4.32567C6.95698 4.06731 7.37924 4.06454 7.6376 4.32567L12.9742 9.65669Z" fill="#949494"/>
|
||||
</svg>
|
||||
|
||||
|
Before Width: | Height: | Size: 449 B After Width: | Height: | Size: 449 B |
@@ -1,3 +1,3 @@
|
||||
<svg width="20" height="20" viewBox="0 0 20 20" fill="none" xmlns="http://www.w3.org/2000/svg">
|
||||
<path d="M10.5084 13.1962C10.2472 13.4574 9.82496 13.4574 9.5666 13.1962L4.23003 7.86242C3.9689 7.60129 3.9689 7.17903 4.23003 6.92068C4.49116 6.66232 4.91342 6.65954 5.17178 6.92068L10.0333 11.7822L14.8976 6.9179C15.1588 6.65676 15.581 6.65676 15.8394 6.9179C16.0977 7.17903 16.1005 7.60129 15.8394 7.85965L10.5084 13.1962Z" fill="#009688"/>
|
||||
<path d="M10.5084 13.1962C10.2472 13.4574 9.82496 13.4574 9.5666 13.1962L4.23003 7.86242C3.9689 7.60129 3.9689 7.17903 4.23003 6.92068C4.49116 6.66232 4.91342 6.65954 5.17178 6.92068L10.0333 11.7822L14.8976 6.9179C15.1588 6.65676 15.581 6.65676 15.8394 6.9179C16.0977 7.17903 16.1005 7.60129 15.8394 7.85965L10.5084 13.1962Z" fill="#949494"/>
|
||||
</svg>
|
||||
|
||||
|
Before Width: | Height: | Size: 446 B After Width: | Height: | Size: 446 B |
@@ -0,0 +1 @@
|
||||
<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 18 18"><line x1="2.5" y1="14.5" x2="16.5" y2="14.5" style="fill:none; stroke:#949494; stroke-linecap:square; stroke-miterlimit:10;"/><line x1="2.5" y1="16.5" x2="16.5" y2="16.5" style="fill:none; stroke:#949494; stroke-linecap:square; stroke-miterlimit:10;"/><line x1="16.5" y1="12.5" x2="2.67" y2="12.5" style="fill:none; stroke:#949494; stroke-linecap:square; stroke-miterlimit:10;"/><line x1="16.5" y1="10.5" x2="3.19" y2="10.5" style="fill:none; stroke:#949494; stroke-linecap:square; stroke-miterlimit:10;"/><line x1="4.11" y1="8.5" x2="16.5" y2="8.5" style="fill:none; stroke:#949494; stroke-linecap:square; stroke-miterlimit:10;"/><line x1="16.5" y1="6.5" x2="5.56" y2="6.5" style="fill:none; stroke:#949494; stroke-linecap:square; stroke-miterlimit:10;"/><line x1="7.87" y1="4.5" x2="16.5" y2="4.5" style="fill:none; stroke:#949494; stroke-linecap:square; stroke-miterlimit:10;"/><line x1="12.92" y1="2.5" x2="16.5" y2="2.5" style="fill:none; stroke:#949494; stroke-linecap:square; stroke-miterlimit:10;"/><path d="M.5,16.5v-2C.5,6.77,6.77.5,14.5.5h2" style="fill:none; stroke:#009688; stroke-linecap:square; stroke-miterlimit:10;"/></svg>
|
||||
|
After Width: | Height: | Size: 1.2 KiB |
@@ -1,6 +1,6 @@
|
||||
{
|
||||
"name": "Afinia",
|
||||
"version": "02.04.00.01",
|
||||
"version": "02.04.00.02",
|
||||
"force_update": "0",
|
||||
"description": "Afinia configurations",
|
||||
"machine_model_list": [
|
||||
@@ -124,14 +124,6 @@
|
||||
"name": "fdm_filament_tpu",
|
||||
"sub_path": "filament/fdm_filament_tpu.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS",
|
||||
"sub_path": "filament/Afinia ABS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS+",
|
||||
"sub_path": "filament/Afinia ABS+.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia ABS+@HS",
|
||||
"sub_path": "filament/Afinia ABS+@HS.json"
|
||||
@@ -140,34 +132,18 @@
|
||||
"name": "Afinia ABS@HS",
|
||||
"sub_path": "filament/Afinia ABS@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value ABS",
|
||||
"sub_path": "filament/Afinia Value ABS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value ABS@HS",
|
||||
"sub_path": "filament/Afinia Value ABS@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia PLA",
|
||||
"sub_path": "filament/Afinia PLA.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia PLA@HS",
|
||||
"sub_path": "filament/Afinia PLA@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value PLA",
|
||||
"sub_path": "filament/Afinia Value PLA.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia Value PLA@HS",
|
||||
"sub_path": "filament/Afinia Value PLA@HS.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia TPU",
|
||||
"sub_path": "filament/Afinia TPU.json"
|
||||
},
|
||||
{
|
||||
"name": "Afinia TPU@HS",
|
||||
"sub_path": "filament/Afinia TPU@HS.json"
|
||||
|
||||
@@ -1,37 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "i5tf9foHnTVNmA2r",
|
||||
"name": "Afinia ABS+",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,31 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "LhDHvMepbh8ecfQT",
|
||||
"name": "Afinia ABS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,34 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00",
|
||||
"setting_id": "1qEFsay7kjYIUkpG",
|
||||
"name": "Afinia PLA",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,28 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Afinia TPU",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"from": "system",
|
||||
"setting_id": "E7WBTARZ971LaDMj",
|
||||
"filament_id": "GFU01",
|
||||
"instantiation": "true",
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.22"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"filament_cost": [
|
||||
"41.99"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,37 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFB00",
|
||||
"setting_id": "jEYVpOPBjFtQ0DXn",
|
||||
"name": "Afinia Value ABS",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"filament_flow_ratio": [
|
||||
"0.95"
|
||||
],
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"60"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"16"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,40 +0,0 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "GFA00",
|
||||
"setting_id": "oNBk0IxmW7C99WI3",
|
||||
"name": "Afinia Value PLA",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"filament_cost": [
|
||||
"24.99"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"21"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"Afinia"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"190"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"190"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Afinia H400 Pro 0.4 nozzle",
|
||||
"Afinia H400 Pro 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Optimal 0.6 nozzle @Anker",
|
||||
"renamed_from": "0.20mm Optimal 0.6 nozzle @Anker.json",
|
||||
"inherits": "fdm_process_anker_common_0_6",
|
||||
"from": "system",
|
||||
"setting_id": "re5qmcOFJ1OJP3Ip",
|
||||
|
||||
+113
-5
@@ -1,7 +1,7 @@
|
||||
{
|
||||
"name": "Bambulab",
|
||||
"url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
|
||||
"version": "02.01.00.18",
|
||||
"version": "02.01.00.19",
|
||||
"force_update": "0",
|
||||
"description": "BBL configurations",
|
||||
"machine_model_list": [
|
||||
@@ -2177,6 +2177,10 @@
|
||||
"name": "Generic ABS @BBL X2D 0.4 nozzle",
|
||||
"sub_path": "filament/Generic ABS @BBL X2D 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth ABS rABS",
|
||||
"sub_path": "filament/addnorth/addnorth ABS rABS.json"
|
||||
},
|
||||
{
|
||||
"name": "PolyLite ABS @BBL A1",
|
||||
"sub_path": "filament/Polymaker/PolyLite ABS @BBL A1.json"
|
||||
@@ -3005,6 +3009,22 @@
|
||||
"name": "Generic PA @BBL X2D 0.4 nozzle",
|
||||
"sub_path": "filament/Generic PA @BBL X2D 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PA Adura",
|
||||
"sub_path": "filament/addnorth/addnorth PA Adura.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PA Adura FDA",
|
||||
"sub_path": "filament/addnorth/addnorth PA Adura FDA.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PA6 Addlantis",
|
||||
"sub_path": "filament/addnorth/addnorth PA6 Addlantis.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PVDF Adamant S1",
|
||||
"sub_path": "filament/addnorth/addnorth PVDF Adamant S1.json"
|
||||
},
|
||||
{
|
||||
"name": "Generic PA-CF",
|
||||
"sub_path": "filament/Generic PA-CF.json"
|
||||
@@ -3029,6 +3049,10 @@
|
||||
"name": "Generic PA-CF @BBL X2D 0.4 nozzle",
|
||||
"sub_path": "filament/Generic PA-CF @BBL X2D 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PA-CF Adura X",
|
||||
"sub_path": "filament/addnorth/addnorth PA-CF Adura X.json"
|
||||
},
|
||||
{
|
||||
"name": "Bambu PC @BBL A1",
|
||||
"sub_path": "filament/Bambu PC @BBL A1.json"
|
||||
@@ -3329,6 +3353,10 @@
|
||||
"name": "Generic PC @BBL X2D 0.4 nozzle",
|
||||
"sub_path": "filament/Generic PC @BBL X2D 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PC BLend HT LCF",
|
||||
"sub_path": "filament/addnorth/addnorth PC BLend HT LCF.json"
|
||||
},
|
||||
{
|
||||
"name": "Generic PCTG @BBL A1",
|
||||
"sub_path": "filament/Generic PCTG @BBL A1.json"
|
||||
@@ -4185,6 +4213,30 @@
|
||||
"name": "Generic PETG @BBL X2D 0.4 nozzle",
|
||||
"sub_path": "filament/Generic PETG @BBL X2D 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PETG Base",
|
||||
"sub_path": "filament/addnorth/addnorth PETG Base.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PETG ESD",
|
||||
"sub_path": "filament/addnorth/addnorth PETG ESD.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PETG Economy",
|
||||
"sub_path": "filament/addnorth/addnorth PETG Economy.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PETG Flame v0",
|
||||
"sub_path": "filament/addnorth/addnorth PETG Flame v0.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PETG PRO Matte",
|
||||
"sub_path": "filament/addnorth/addnorth PETG PRO Matte.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PETG rPETG Matte",
|
||||
"sub_path": "filament/addnorth/addnorth PETG rPETG Matte.json"
|
||||
},
|
||||
{
|
||||
"name": "Generic PETG HF @BBL A1",
|
||||
"sub_path": "filament/Generic PETG HF @BBL A1.json"
|
||||
@@ -4305,6 +4357,10 @@
|
||||
"name": "Generic PETG-CF @BBL X2D 0.4 nozzle",
|
||||
"sub_path": "filament/Generic PETG-CF @BBL X2D 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PETG-CF Rigid X",
|
||||
"sub_path": "filament/addnorth/addnorth PETG-CF Rigid X.json"
|
||||
},
|
||||
{
|
||||
"name": "PolyLite PETG @BBL A1",
|
||||
"sub_path": "filament/Polymaker/PolyLite PETG @BBL A1.json"
|
||||
@@ -6589,6 +6645,34 @@
|
||||
"name": "Generic PLA @BBL X2D 0.4 nozzle",
|
||||
"sub_path": "filament/Generic PLA @BBL X2D 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PLA E-PLA",
|
||||
"sub_path": "filament/addnorth/addnorth PLA E-PLA.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PLA Economy",
|
||||
"sub_path": "filament/addnorth/addnorth PLA Economy.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PLA HT-PLA PRO Matte",
|
||||
"sub_path": "filament/addnorth/addnorth PLA HT-PLA PRO Matte.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PLA Textura",
|
||||
"sub_path": "filament/addnorth/addnorth PLA Textura.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PLA Wood",
|
||||
"sub_path": "filament/addnorth/addnorth PLA Wood.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PLA X-PLA",
|
||||
"sub_path": "filament/addnorth/addnorth PLA X-PLA.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PLA rPLA RE-ADD",
|
||||
"sub_path": "filament/addnorth/addnorth PLA rPLA RE-ADD.json"
|
||||
},
|
||||
{
|
||||
"name": "Generic PLA High Speed @BBL A1",
|
||||
"sub_path": "filament/Generic PLA High Speed @BBL A1.json"
|
||||
@@ -6649,6 +6733,10 @@
|
||||
"name": "Generic PLA High Speed @BBL X2D 0.4 nozzle",
|
||||
"sub_path": "filament/Generic PLA High Speed @BBL X2D 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PLA X-PLA High Speed",
|
||||
"sub_path": "filament/addnorth/addnorth PLA X-PLA High Speed.json"
|
||||
},
|
||||
{
|
||||
"name": "Generic PLA Silk",
|
||||
"sub_path": "filament/Generic PLA Silk.json"
|
||||
@@ -6689,6 +6777,10 @@
|
||||
"name": "Generic PLA Silk @BBL X2D 0.4 nozzle",
|
||||
"sub_path": "filament/Generic PLA Silk @BBL X2D 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PLA Premium Silk",
|
||||
"sub_path": "filament/addnorth/addnorth PLA Premium Silk.json"
|
||||
},
|
||||
{
|
||||
"name": "Generic PLA-CF",
|
||||
"sub_path": "filament/Generic PLA-CF.json"
|
||||
@@ -6729,6 +6821,10 @@
|
||||
"name": "Generic PLA-CF @BBL X2D 0.4 nozzle",
|
||||
"sub_path": "filament/Generic PLA-CF @BBL X2D 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth PLA-CF Carbon Fiber",
|
||||
"sub_path": "filament/addnorth/addnorth PLA-CF Carbon Fiber.json"
|
||||
},
|
||||
{
|
||||
"name": "Numakers PLA+ @BBL A1",
|
||||
"sub_path": "filament/Numakers/Numakers PLA+ @BBL A1.json"
|
||||
@@ -6981,10 +7077,6 @@
|
||||
"name": "Panchroma PLA @BBL X1C 0.2 nozzle",
|
||||
"sub_path": "filament/Polymaker/Panchroma PLA @BBL X1C 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Panchroma PLA Silk @BBL X1C 0.2 nozzle",
|
||||
"sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Panchroma PLA Celestial @BBL A1",
|
||||
"sub_path": "filament/Polymaker/Panchroma PLA Celestial @BBL A1.json"
|
||||
@@ -7381,6 +7473,10 @@
|
||||
"name": "Panchroma PLA Silk @BBL X1C",
|
||||
"sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C.json"
|
||||
},
|
||||
{
|
||||
"name": "Panchroma PLA Silk @BBL X1C 0.2 nozzle",
|
||||
"sub_path": "filament/Polymaker/Panchroma PLA Silk @BBL X1C 0.2 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Panchroma PLA Starlight @BBL A1",
|
||||
"sub_path": "filament/Polymaker/Panchroma PLA Starlight @BBL A1.json"
|
||||
@@ -8889,6 +8985,18 @@
|
||||
"name": "Generic TPU @BBL X2D 0.4 nozzle",
|
||||
"sub_path": "filament/Generic TPU @BBL X2D 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth TPU EasyFlex",
|
||||
"sub_path": "filament/addnorth/addnorth TPU EasyFlex.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth TPU Pro Matte 85A",
|
||||
"sub_path": "filament/addnorth/addnorth TPU Pro Matte 85A.json"
|
||||
},
|
||||
{
|
||||
"name": "addnorth TPU Pro Matte 95A",
|
||||
"sub_path": "filament/addnorth/addnorth TPU Pro Matte 95A.json"
|
||||
},
|
||||
{
|
||||
"name": "Generic TPU for AMS @BBL A1",
|
||||
"sub_path": "filament/Generic TPU for AMS @BBL A1.json"
|
||||
|
||||
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Bambu PLA Tough @BBL X1C",
|
||||
"renamed_from": "Bambu PLA Impact @BBL X1C",
|
||||
"inherits": "Bambu PLA Tough @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSA09_02",
|
||||
|
||||
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Panchroma PLA Satin @BBL A1",
|
||||
"renamed_from": "Panchroma PLA Stain @BBL A1",
|
||||
"inherits": "Panchroma PLA Satin @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSPM005_00",
|
||||
|
||||
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Panchroma PLA Satin @BBL A1M",
|
||||
"renamed_from": "Panchroma PLA Stain @BBL A1M",
|
||||
"inherits": "Panchroma PLA Satin @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSPM005_02",
|
||||
|
||||
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Panchroma PLA Satin @BBL P1P",
|
||||
"renamed_from": "Panchroma PLA Stain @BBL P1P",
|
||||
"inherits": "Panchroma PLA Satin @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSPM005_04",
|
||||
|
||||
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "Panchroma PLA Satin @BBL X1",
|
||||
"renamed_from": "Panchroma PLA Stain @BBL X1",
|
||||
"inherits": "Panchroma PLA Satin @base",
|
||||
"from": "system",
|
||||
"setting_id": "GFSPM005_06",
|
||||
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth ABS rABS",
|
||||
"inherits": "Generic ABS @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANRA_00",
|
||||
"filament_id": "GF_ANRA",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"50"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"25"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"0"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"200"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"43"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.03"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95",
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth ABS rABS"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"255",
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"50"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"105"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"105"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PA Adura FDA",
|
||||
"inherits": "Generic PA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANAF_00",
|
||||
"filament_id": "GF_ANAF",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"50"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"300"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"50"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.99",
|
||||
"0.99"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8",
|
||||
"11"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PA Adura FDA"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"2"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"265",
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265",
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"245"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PA Adura",
|
||||
"inherits": "Generic PA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANAD_00",
|
||||
"filament_id": "GF_ANAD",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"50"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"300"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"50"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.99",
|
||||
"0.99"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8",
|
||||
"11"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PA Adura"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"2"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"265",
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265",
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"245"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PA-CF Adura X",
|
||||
"inherits": "Generic PA-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANAX_00",
|
||||
"filament_id": "GF_ANAX",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"50"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"300"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"109"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.2"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.99",
|
||||
"0.99"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8",
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PA-CF Adura X"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"2"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"280",
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275",
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"280"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"260"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"120"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PA6 Addlantis",
|
||||
"inherits": "Generic PA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANLA_00",
|
||||
"filament_id": "GF_ANLA",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"60"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"30"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"300"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"82"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.18"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.99",
|
||||
"0.99"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8",
|
||||
"11"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.62 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PA6 Addlantis"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA6"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"2"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"275",
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275",
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"285"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"265"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"40"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"0%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"0"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"15"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"110"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PC BLend HT LCF",
|
||||
"inherits": "Generic PC @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANPBX_00",
|
||||
"filament_id": "GF_ANPBX",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"50"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"40"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"300"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"109"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.3"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95",
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"15",
|
||||
"15"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PC BLend HT LCF"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"285",
|
||||
"285"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"275",
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"265"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"2"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"185"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PETG Base",
|
||||
"inherits": "Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANPE_00",
|
||||
"filament_id": "GF_ANPE",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"300"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"35.6"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95",
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PETG Base"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260",
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255",
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PETG ESD",
|
||||
"inherits": "Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANEG_00",
|
||||
"filament_id": "GF_ANEG",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"300"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"76"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.3"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97",
|
||||
"0.97"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.6 high reliability - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PETG ESD"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"290",
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"290",
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"255"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PETG Economy",
|
||||
"inherits": "Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANGE_00",
|
||||
"filament_id": "GF_ANGE",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"300"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"27"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95",
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PETG Economy"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260",
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255",
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PETG Flame v0",
|
||||
"inherits": "Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANPF_00",
|
||||
"filament_id": "GF_ANPF",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"300"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"71"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.97",
|
||||
"0.97"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20",
|
||||
"20"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.4 high reliability - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PETG Flame V0"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"290",
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"290",
|
||||
"290"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"255"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PETG PRO Matte",
|
||||
"inherits": "Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANPM_00",
|
||||
"filament_id": "GF_ANPM",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"300"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"54.5"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95",
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PETG PRO Matte"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260",
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"260",
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"235"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"1"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PETG rPETG Matte",
|
||||
"inherits": "Generic PETG @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANRM_00",
|
||||
"filament_id": "GF_ANRM",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"300"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"36"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95",
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10",
|
||||
"10"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PETG rPETG Matte"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260",
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"255",
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"225"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"90"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PETG-CF Rigid X",
|
||||
"inherits": "Generic PETG-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANRX_00",
|
||||
"filament_id": "GF_ANRX",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"30"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"5"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"300"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"82"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.3"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.95",
|
||||
"0.95"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8",
|
||||
"11"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.6 - V.Pack:18_05_2026 – Special thanks to Mats.Z (3DP24, Jonkoping University / Campus Varnamo) for profile improvements during internship autumn 2025.",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PETG-CF Rigid X"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PETG-CF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"270",
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"270",
|
||||
"270"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"275"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"245"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"10%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"0"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"6"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"40"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"80"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"80"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PLA E-PLA",
|
||||
"inherits": "Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANEP_00",
|
||||
"filament_id": "GF_ANEP",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"5"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"100"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98",
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"15%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PLA E-PLA"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240",
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235",
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PLA Economy",
|
||||
"inherits": "Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANPL_00",
|
||||
"filament_id": "GF_ANPL",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"100"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"23"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98",
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"15%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PLA Economy"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240",
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235",
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PLA HT-PLA PRO Matte",
|
||||
"inherits": "Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANHTP_00",
|
||||
"filament_id": "GF_ANHTP",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"100"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"55"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.4"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98",
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8",
|
||||
"11"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"15%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PLA HT-PLA PRO Matte"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"70"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"70"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240",
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235",
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"210"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"75"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"75"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PLA Premium Silk",
|
||||
"inherits": "Generic PLA Silk @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANPS_00",
|
||||
"filament_id": "GF_ANPS",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"50"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"2"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"90"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"70"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"100"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"42.5"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.26"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8",
|
||||
"10"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"15%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PLA Premium Silk"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"245",
|
||||
"245"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"255"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"235"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PLA Textura",
|
||||
"inherits": "Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANTE_00",
|
||||
"filament_id": "GF_ANTE",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"80"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"100"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"55"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98",
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"10",
|
||||
"14"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"15%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PLA Textura"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235",
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235",
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PLA Wood",
|
||||
"inherits": "Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANPLW_00",
|
||||
"filament_id": "GF_ANPLW",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"100"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"54.5"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98",
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"8",
|
||||
"8"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"15%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PLA Wood"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"230",
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230",
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"200"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"0"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"60"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"60"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PLA X-PLA High Speed",
|
||||
"inherits": "Generic PLA High Speed @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANXPH_00",
|
||||
"filament_id": "GF_ANXPH",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"100"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"20"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.24"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98",
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12",
|
||||
"12"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"15%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PLA X-PLA High Speed"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240",
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235",
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PLA X-PLA",
|
||||
"inherits": "Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANXP_00",
|
||||
"filament_id": "GF_ANXP",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"100"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"39"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98",
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14",
|
||||
"14"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"15%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PLA X-PLA"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235",
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230",
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"25%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PLA rPLA RE-ADD",
|
||||
"inherits": "Generic PLA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANRPL_00",
|
||||
"filament_id": "GF_ANRPL",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"5"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"100"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"23"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.25"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98",
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"12",
|
||||
"16"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"15%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PLA rPLA RE-ADD"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240",
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235",
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"65"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"65"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,320 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PLA-CF Carbon Fiber",
|
||||
"inherits": "Generic PLA-CF @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANPCF_00",
|
||||
"filament_id": "GF_ANPCF",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"45"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"45"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"100"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"37"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.27"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n\n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.98"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"14"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"15%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PLA-CF Carbon Fiber"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"230"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"190"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"0"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"7"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"20"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"50"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"50"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"55"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"55"
|
||||
],
|
||||
"version": "2.0.0.87"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth PVDF Adamant S1",
|
||||
"inherits": "Generic PA @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANPV_00",
|
||||
"filament_id": "GF_ANPV",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"1"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"0"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"50"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"3"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"5"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"80"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"25"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"400"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"146"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.8"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"4",
|
||||
"4"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.6 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"0%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth PVDF Adamant S1"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (bed_temperature[current_extruder] >80)||(bed_temperature_initial_layer[current_extruder] >80)}M106 P3 S255\n{elsif (bed_temperature[current_extruder] >60)||(bed_temperature_initial_layer[current_extruder] >60)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"2"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"260",
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"265",
|
||||
"265"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"260"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"240"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"80"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"0"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"40"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"12"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"135"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"100"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"100"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth TPU EasyFlex",
|
||||
"inherits": "Generic TPU @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANEF_00",
|
||||
"filament_id": "GF_ANEF",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"600"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"82"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.9",
|
||||
"5"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.7 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"15%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth TPU EasyFlex"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240",
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235",
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,339 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth TPU Pro Matte 85A",
|
||||
"inherits": "Generic TPU @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANTA_00",
|
||||
"filament_id": "GF_ANTA",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"600"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"82"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.2",
|
||||
"5"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.2 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"15%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth TPU Pro Matte 85A"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"250",
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"8"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -0,0 +1,340 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"name": "addnorth TPU Pro Matte 95A",
|
||||
"inherits": "Generic TPU @base",
|
||||
"from": "system",
|
||||
"setting_id": "GF_ANTM_00",
|
||||
"filament_id": "GF_ANTM",
|
||||
"instantiation": "true",
|
||||
"activate_air_filtration": [
|
||||
"0"
|
||||
],
|
||||
"additional_cooling_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"chamber_temperatures": [
|
||||
"0"
|
||||
],
|
||||
"circle_compensation_speed": [
|
||||
"200"
|
||||
],
|
||||
"close_fan_the_first_x_layers": [
|
||||
"1"
|
||||
],
|
||||
"compatible_printers": [
|
||||
"Bambu Lab A1 mini 0.4 nozzle",
|
||||
"Bambu Lab A1 mini 0.6 nozzle",
|
||||
"Bambu Lab A1 mini 0.8 nozzle",
|
||||
"Bambu Lab A1 0.4 nozzle",
|
||||
"Bambu Lab A1 0.6 nozzle",
|
||||
"Bambu Lab A1 0.8 nozzle",
|
||||
"Bambu Lab P1P 0.4 nozzle",
|
||||
"Bambu Lab P1P 0.6 nozzle",
|
||||
"Bambu Lab P1P 0.8 nozzle",
|
||||
"Bambu Lab P1S 0.4 nozzle",
|
||||
"Bambu Lab P1S 0.6 nozzle",
|
||||
"Bambu Lab P1S 0.8 nozzle",
|
||||
"Bambu Lab X1 0.4 nozzle",
|
||||
"Bambu Lab X1 0.6 nozzle",
|
||||
"Bambu Lab X1 0.8 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.4 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.6 nozzle",
|
||||
"Bambu Lab X1 Carbon 0.8 nozzle",
|
||||
"Bambu Lab X1E 0.4 nozzle",
|
||||
"Bambu Lab X1E 0.6 nozzle",
|
||||
"Bambu Lab X1E 0.8 nozzle",
|
||||
"Bambu Lab H2D 0.4 nozzle",
|
||||
"Bambu Lab H2D 0.6 nozzle",
|
||||
"Bambu Lab H2D 0.8 nozzle",
|
||||
"Bambu Lab H2D Pro 0.4 nozzle",
|
||||
"Bambu Lab H2D Pro 0.6 nozzle",
|
||||
"Bambu Lab H2D Pro 0.8 nozzle",
|
||||
"Bambu Lab H2S 0.4 nozzle",
|
||||
"Bambu Lab H2S 0.6 nozzle",
|
||||
"Bambu Lab H2S 0.8 nozzle",
|
||||
"Bambu Lab P2S 0.4 nozzle",
|
||||
"Bambu Lab P2S 0.6 nozzle",
|
||||
"Bambu Lab P2S 0.8 nozzle",
|
||||
"Bambu Lab X2D 0.2 nozzle",
|
||||
"Bambu Lab X2D 0.4 nozzle",
|
||||
"Bambu Lab X2D 0.6 nozzle",
|
||||
"Bambu Lab X2D 0.8 nozzle"
|
||||
],
|
||||
"compatible_printers_condition": "",
|
||||
"compatible_prints": [],
|
||||
"compatible_prints_condition": "",
|
||||
"complete_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"cool_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"cool_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"counter_coef_2": [
|
||||
"0.008"
|
||||
],
|
||||
"counter_coef_3": [
|
||||
"-0.041"
|
||||
],
|
||||
"counter_limit_max": [
|
||||
"0.033"
|
||||
],
|
||||
"counter_limit_min": [
|
||||
"-0.035"
|
||||
],
|
||||
"default_filament_colour": [
|
||||
""
|
||||
],
|
||||
"diameter_limit": [
|
||||
"50"
|
||||
],
|
||||
"during_print_exhaust_fan_speed": [
|
||||
"70"
|
||||
],
|
||||
"enable_overhang_bridge_fan": [
|
||||
"1"
|
||||
],
|
||||
"enable_pressure_advance": [
|
||||
"0"
|
||||
],
|
||||
"eng_plate_temp": [
|
||||
"30"
|
||||
],
|
||||
"eng_plate_temp_initial_layer": [
|
||||
"30"
|
||||
],
|
||||
"fan_cooling_layer_time": [
|
||||
"100"
|
||||
],
|
||||
"fan_max_speed": [
|
||||
"100"
|
||||
],
|
||||
"fan_min_speed": [
|
||||
"100"
|
||||
],
|
||||
"filament_adhesiveness_category": [
|
||||
"600"
|
||||
],
|
||||
"filament_change_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_cost": [
|
||||
"82"
|
||||
],
|
||||
"filament_density": [
|
||||
"1.1"
|
||||
],
|
||||
"filament_deretraction_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"filament_diameter": [
|
||||
"1.75"
|
||||
],
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_extruder_variant": [
|
||||
"Direct Drive Standard"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_is_support": [
|
||||
"0"
|
||||
],
|
||||
"filament_long_retractions_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3.9",
|
||||
"5"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
],
|
||||
"filament_notes": "File Version:2.3 - V.Pack:18_05_2026",
|
||||
"filament_pre_cooling_temperature": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_prime_volume": [
|
||||
"45"
|
||||
],
|
||||
"filament_ramming_travel_time": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_ramming_volumetric_speed": [
|
||||
"-1",
|
||||
"-1"
|
||||
],
|
||||
"filament_retract_before_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_restart_extra": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retract_when_changing_layer": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"filament_retraction_distances_when_cut": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_length": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"filament_retraction_minimum_travel": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_retraction_speed": [
|
||||
"40",
|
||||
"40"
|
||||
],
|
||||
"filament_scarf_gap": [
|
||||
"15%"
|
||||
],
|
||||
"filament_scarf_height": [
|
||||
"10%"
|
||||
],
|
||||
"filament_scarf_length": [
|
||||
"10"
|
||||
],
|
||||
"filament_scarf_seam_type": [
|
||||
"none"
|
||||
],
|
||||
"filament_settings_id": [
|
||||
"addnorth TPU Pro Matte 95A"
|
||||
],
|
||||
"filament_shrink": [
|
||||
"100%"
|
||||
],
|
||||
"filament_soluble": [
|
||||
"0"
|
||||
],
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode {if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200 {elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150 {elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50 {endif} {if activate_air_filtration[current_extruder] && support_air_filtration} M106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} {endif}"
|
||||
],
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_vendor": [
|
||||
"addnorth"
|
||||
],
|
||||
"filament_wipe": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_wipe_distance": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"filament_z_hop_types": [
|
||||
"nil",
|
||||
"nil"
|
||||
],
|
||||
"full_fan_speed_layer": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_1": [
|
||||
"0"
|
||||
],
|
||||
"hole_coef_2": [
|
||||
"-0.008"
|
||||
],
|
||||
"hole_coef_3": [
|
||||
"0.23415"
|
||||
],
|
||||
"hole_limit_max": [
|
||||
"0.22"
|
||||
],
|
||||
"hole_limit_min": [
|
||||
"0.088"
|
||||
],
|
||||
"hot_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"hot_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"impact_strength_z": [
|
||||
"10"
|
||||
],
|
||||
"nozzle_temperature": [
|
||||
"240",
|
||||
"240"
|
||||
],
|
||||
"nozzle_temperature_initial_layer": [
|
||||
"235",
|
||||
"235"
|
||||
],
|
||||
"nozzle_temperature_range_high": [
|
||||
"250"
|
||||
],
|
||||
"nozzle_temperature_range_low": [
|
||||
"230"
|
||||
],
|
||||
"overhang_fan_speed": [
|
||||
"100"
|
||||
],
|
||||
"overhang_fan_threshold": [
|
||||
"50%"
|
||||
],
|
||||
"overhang_threshold_participating_cooling": [
|
||||
"95%"
|
||||
],
|
||||
"pre_start_fan_time": [
|
||||
"2"
|
||||
],
|
||||
"pressure_advance": [
|
||||
"0.02"
|
||||
],
|
||||
"reduce_fan_stop_start_freq": [
|
||||
"1"
|
||||
],
|
||||
"required_nozzle_HRC": [
|
||||
"3"
|
||||
],
|
||||
"slow_down_for_layer_cooling": [
|
||||
"1"
|
||||
],
|
||||
"slow_down_layer_time": [
|
||||
"10"
|
||||
],
|
||||
"slow_down_min_speed": [
|
||||
"10"
|
||||
],
|
||||
"supertack_plate_temp": [
|
||||
"0"
|
||||
],
|
||||
"supertack_plate_temp_initial_layer": [
|
||||
"0"
|
||||
],
|
||||
"temperature_vitrification": [
|
||||
"50"
|
||||
],
|
||||
"textured_plate_temp": [
|
||||
"35"
|
||||
],
|
||||
"textured_plate_temp_initial_layer": [
|
||||
"35"
|
||||
],
|
||||
"version": "2.0.0.77"
|
||||
}
|
||||
@@ -1,6 +1,7 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @BBL X1C",
|
||||
"renamed_from": "0.20mm Bambu Support W @BBL X1C",
|
||||
"inherits": "fdm_process_single_0.20",
|
||||
"from": "system",
|
||||
"setting_id": "GP004",
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
{
|
||||
"name": "Blocks",
|
||||
"version": "02.04.00.01",
|
||||
"version": "02.04.00.02",
|
||||
"force_update": "0",
|
||||
"description": "Blocks configurations",
|
||||
"machine_model_list": [
|
||||
|
||||
@@ -85,10 +85,8 @@
|
||||
"BLOCKS RD50 V2 0.4 nozzle",
|
||||
"BLOCKS RD50 V2 0.6 nozzle",
|
||||
"BLOCKS RD50 V2 0.8 nozzle",
|
||||
"BLOCKS RD50 V2",
|
||||
"BLOCKS RF50 0.4 nozzle",
|
||||
"BLOCKS RF50 0.6 nozzle",
|
||||
"BLOCKS RF50 0.8 nozzle",
|
||||
"BLOCKS RF50"
|
||||
"BLOCKS RF50 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -85,10 +85,8 @@
|
||||
"BLOCKS RD50 V2 0.4 nozzle",
|
||||
"BLOCKS RD50 V2 0.6 nozzle",
|
||||
"BLOCKS RD50 V2 0.8 nozzle",
|
||||
"BLOCKS RD50 V2",
|
||||
"BLOCKS RF50 0.4 nozzle",
|
||||
"BLOCKS RF50 0.6 nozzle",
|
||||
"BLOCKS RF50 0.8 nozzle",
|
||||
"BLOCKS RF50"
|
||||
"BLOCKS RF50 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -85,10 +85,8 @@
|
||||
"BLOCKS RD50 V2 0.4 nozzle",
|
||||
"BLOCKS RD50 V2 0.6 nozzle",
|
||||
"BLOCKS RD50 V2 0.8 nozzle",
|
||||
"BLOCKS RD50 V2",
|
||||
"BLOCKS RF50 0.4 nozzle",
|
||||
"BLOCKS RF50 0.6 nozzle",
|
||||
"BLOCKS RF50 0.8 nozzle",
|
||||
"BLOCKS RF50"
|
||||
"BLOCKS RF50 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -91,10 +91,8 @@
|
||||
"BLOCKS RD50 V2 0.4 nozzle",
|
||||
"BLOCKS RD50 V2 0.6 nozzle",
|
||||
"BLOCKS RD50 V2 0.8 nozzle",
|
||||
"BLOCKS RD50 V2",
|
||||
"BLOCKS RF50 0.4 nozzle",
|
||||
"BLOCKS RF50 0.6 nozzle",
|
||||
"BLOCKS RF50 0.8 nozzle",
|
||||
"BLOCKS RF50"
|
||||
"BLOCKS RF50 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -16,10 +16,8 @@
|
||||
"BLOCKS RD50 V2 0.4 nozzle",
|
||||
"BLOCKS RD50 V2 0.6 nozzle",
|
||||
"BLOCKS RD50 V2 0.8 nozzle",
|
||||
"BLOCKS RD50 V2",
|
||||
"BLOCKS RF50 0.4 nozzle",
|
||||
"BLOCKS RF50 0.6 nozzle",
|
||||
"BLOCKS RF50 0.8 nozzle",
|
||||
"BLOCKS RF50"
|
||||
"BLOCKS RF50 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
@@ -16,10 +16,8 @@
|
||||
"BLOCKS RD50 V2 0.4 nozzle",
|
||||
"BLOCKS RD50 V2 0.6 nozzle",
|
||||
"BLOCKS RD50 V2 0.8 nozzle",
|
||||
"BLOCKS RD50 V2",
|
||||
"BLOCKS RF50 0.4 nozzle",
|
||||
"BLOCKS RF50 0.6 nozzle",
|
||||
"BLOCKS RF50 0.8 nozzle",
|
||||
"BLOCKS RF50"
|
||||
"BLOCKS RF50 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user