Carries snaporca 9f0a6656bc.
Mouse3DController::apply DRAINS the input queue and every BOUND canvas idles and calls it, but a
hidden canvas's render() early-returns on _is_shown_on_screen() — so it swallows motion, applies
it to the shared plater camera, and draws nothing. The next visible frame jumps by more than one
state change. The plater keeps exactly one of its three views bound; the Design canvas binds once
at construction and never unbinds, so two canvases drain the same queue.
Guarded at the apply site so only the canvas actually on screen takes motion off the queue,
whatever happens to be bound, and without touching the plater's view-switching state machine.
Reported by exussum12 on PR #15238 as lag and jerkiness in the Design tab against "really smooth
on the other tab"; he guessed the mechanism correctly. NOT verified with a device — there is no
SpaceMouse here and the rig has no HID, so this is a mechanism traced in source and matched to a
user's description, not a measurement.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Carries snaporca 0231bd5b68. Parity holds: 17 files identical, 8 diverging as expected.
A reflection reverses orientation, so mirror_entities now hands the reflected half back reversed
in ORDER and flipped per ENTITY — an arc swapping its angles as well as its ends, a spline
reversing its control points. Appending it to the source then yields one walkable chain instead
of two halves meeting head-to-head, and a mirrored CCW loop stays CCW.
This is the producer half of the confusion that cost three defects; the consumers (offset, and
the exact loop area) keep their defensive handling, because that is what makes them correct for
hand-built and imported sketches rather than only for geometry this function produced.
Contract change, carried with the reason: a mirrored line's p0 is the reflection of the SOURCE's
p1, and a mirrored CCW arc keeps a POSITIVE sweep — the reflection negates it, walking it the
other way negates it again. Both [SketchEdit] cases updated, and a new [SketchProfile] case
"a mirrored half continues the original chain" pins the property directly.
Kernel here: all tests passed, 2687 assertions in 232 test cases. GUI target builds and links.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Carries snaporca 572f794c84, d0f9a0052a, 9f7e4e3627 and 3974f8a170. Parity holds: 17 files
identical, 8 diverging by their expected counts.
EXACT AREA. A loop's area is now integrated entity by entity in traversal order — Green's
theorem — instead of being shoelaced over the render polyline, which faceted every arc into 24
chords and lost 2.02 mm2 on a 3706.86 mm2 stadium. 0.054%, invisible on screen, and wrong in a
number reported as "the area".
OFFSET FOLLOWS THE TRAVERSAL. Offsetting a mirrored profile put one half on the wrong side and
split the loop in two, because the chainer only followed p1->p0 links and each entity's offset
side was taken from its stored direction. Chains are now orientation-aware, seeded at a free end,
offset by `reversed ? -d : d`, and normalised head-to-tail on the way out — so offset is correct
for any input ordering and its own output cannot reintroduce the problem.
Both are the same underlying lesson, which has now cost three separate defects: an entity's
STORED direction is not its direction of TRAVEL around the loop.
THE LADDER. scripts/sketch-ladder.py is a graded suite of 2D sketches judged the way a person
judges them — VERTEX, LENGTH, ARC, TANGENT, SYMMETRY, CLOSED — with area only as a cross-check,
because area is derived and nobody can confirm it by eye. Eight rungs from a rectangle up to
MPD5 from the StudyCadCam corpus, a dia 27 x 95 pin reproduced as its revolve half-profile with
the R5 fillet tangency solved exactly. Entirely 2D: no extrude or any solid feature.
Kernel here: all tests passed, 2681 assertions in 231 test cases, including the new
"profile: a mirrored half offsets as one loop, not two". GUI target builds and links.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Carries snaporca 95e59289f9, faec177d42 and 20df726ecb. Parity re-verified: 17 files identical,
8 diverging by their expected counts — DesignCanvas.cpp back to 16 and DesignPanel.cpp back to
32, which is the proof each hunk landed on the right side of the FeatFlyout and TAB_ID_PREPARE
divergences rather than on top of them.
All three answer exussum12's review on OrcaSlicer PR #15238.
ENTER/ESC IN THE VALUE FIELD. The field is a borderless always-on-top frame, and whether it may
hold keyboard focus is the platform's decision — a borderless NSWindow can never be key, and
mutter refuses a re-mapped window. When focus is denied the keys reach the panel instead and the
queued-dimension chain (a line queues Length then Angle) cannot be walked. The CHAR_HOOK now
forwards Enter/Numpad-Enter/Tab/Esc to the field when it is open and unfocused, and stays out of
the way when it is focused.
ESC FROM ANYWHERE. Separately and more simply: `dismissable` is false throughout sketch mode
because m_active is the FEATURE tool, so Esc fell through to whatever widget had focus. Click
any toolbar button or the Construction checkbox first and Esc did nothing at all — the likelier
reading of "Esc hardly ever works", and platform-independent. DesignCanvas exposes
request_sketch_exit() and the hook calls it whenever a sketch is live, after the inline-field
forwarding so an open field still takes Esc first.
RENAME. wxTR_EDIT_LABELS plus the two label-edit events write through to CadFeature::name and the
recipe, with a Rename verb in the offer and F2. The rebuild is deferred with CallAfter because
refresh_tree() destroys the very wxTreeItemId wx is holding during END_LABEL_EDIT — inline, it
killed the process.
STALE PICKS. set_tool now drops the Dimension tool's first pick, the Constrain picks and
m_point_sel, and delete_selected clears the pending dimension reference that could otherwise
dereference a renumbered entity.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Carries snaporca 39fac9b725. Parity re-verified: 17 files identical, 8 diverging by their
expected counts, DesignPanel.cpp still at 32 — the mirrored files were copied and the two
divergent ones patched hunk by hunk, so the counts returning to their expected values is the
proof each landed on the right side.
All 90 offer verbs are now firable by name over the socket, which matters because a deck key
can only send a keystroke and 49 of them have no shortcut at all. sketch_set_value calls the
same apply_dimension the in-canvas value field calls, so a typed dimension can be asserted with
no window manager in the way.
Three guards came with it, each confirmed against the source: on_mass_properties bounds-checks
m_sel_solid_body (it defaults to -1, and run_verb bypasses the menu grey-out that used to hide
that); sketch_set_value validates its value at the boundary because apply_dimension records a
driving constraint even for values it refused to apply; and run_verb refuses btn:/fly: verbs
that do not apply to the selection while leaving key: verbs alone, so the socket offers exactly
what the GUI offers. Dispatch is deferred through CallAfter so no modal verb can wedge the
socket thread.
GUI target builds and links against the rebuilt deps image.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Carries snaporca 971320e129, 6b049f0dc6, 4aae782029, 444d59f212, 74cf3d7e54 and the build
guards from 597557a6e4. Parity re-verified after every hunk: 17 files identical, 8 diverging by
their expected counts — DesignPanel.cpp still 32, DesignCanvas.cpp still 16, which is the proof
each hunk landed on the right side rather than being copied over a real divergence.
OFFSET OFFSETS THE CHAIN. Per-entity offsetting returned a closed rectangle as four parallel
segments that no longer touch, so entities_to_wires gave four OPEN wires and nothing could be
extruded. offset_entities now chains by shared endpoints and repairs each seam by mitering the
neighbours to their intersection. Second bug, invisible to any single-entity test: +d meant
"left of travel" for a line but "radius + d" for an arc regardless of sweep, so a slot outline
offset with its straights going one way and its caps the other. The convention is now written on
the declaration and pinned by a test.
tests/libslic3r/test_sketchprofile.cpp is new and asserts the LOOP rather than coordinates —
the property that decides whether a profile can be built, and the one the existing single-entity
[SketchEdit] cases cannot see. Its include is catch2/catch_all.hpp here: this fork ships Catch2
v3 while snaporca is on v2, which is why the test files are a tolerated divergence.
RIGHT-CLICK PICKS WHAT YOU POINTED AT, so a line's own verbs are offered instead of the
empty-selection vocabulary; sk_delete stops sharing btn:delete with the feature tree; and an
element's defining number (length / radius / diameter / angle / distance) can be typed, from the
menu or from V.
TWELVE MCP SKETCH VERBS. The socket had ~40 verbs and none touched a sketch, so the 2D layer
could only be exercised by driving a GUI with synthetic clicks. sketch_describe reports each
closed loop, the loops it encloses as voids, exact areas, and where a chain is still open;
sketch_validate/sketch_heal are FreeCAD's ValidateSketch — find vertices that overlap within a
tolerance but carry no coincidence, then weld them AND record the constraint, so a loop closed
by floating-point luck becomes one closed by construction. scripts/mcp-sketch-smoke.py is the
loop that asserts all of it.
Kernel suite on this fork: all tests passed, 2677 assertions in 230 test cases. The GUI target
links against the rebuilt deps image (the wxInspector blockage is gone) and the binary carries
the new verbs.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Building orcacad-deps from this Dockerfile removes the snaporca-deps base, which is the point
(Trap 1: the old image's baked tree was project(Snapmaker_Orca)) — but that base was also where
Xvfb, openbox, xdotool and scrot came from. Without them gui-session.sh reports display DOWN and
orca-slicer dies with a trace trap on no display. Verified: the session now comes up with
display up, wm up, and the Untitled - OrcaSlicer window present.
Raises the bound from -j8 to -j12: the incident dump measured 1.17 GB average per cc1plus,
so 12 in flight is ~14 GB typical, well inside the 40 GB cgroup ceiling that is the real
guarantee. Keeps the file byte-identical to snaporca's copy, which the header requires.
Dockerfile.deps builds the deps with -j 12 for the same reason, and symlinks
deps/build/destdir -> deps/build/OrcaSlicer_dep: this tree installs under the latter name
while the orcacad_buildcache volume has the former baked as absolute paths in its CMakeCache.
Same tree, two names — without the link, one directory rename costs a full cold rebuild.
Both forks ran this script at once on 2026-08-21, each with ninja -j$(nproc)=16.
36 cc1plus held 42 GB of a 62 GB box, the kernel OOM-killed for 2h28m, ssh went
unreachable, lightdm was destroyed (2946 session kill events), and neither build
produced a single object file.
Three bounds, weakest to strongest: a flock on a path SHARED by both forks so
they serialise instead of summing; -j8 so the box stays usable while it
compiles; and --memory on the container, which is the actual guarantee — a
runaway build now dies inside its own cgroup instead of taking the host with it.
--memory-swap is pinned equal to --memory because swap thrash is what made ssh
hang rather than fail.
Kept byte-identical to the copy in the snaporca fork, as the header requires.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Both were mouse-only: Commit to Plate is a toolbar button bound to wxEVT_BUTTON,
the bed is a CheckBox, and neither had an accelerator. That put them out of
reach of anything driving the keyboard, and out of reach of a hand that had not
already left the model to find them.
Ctrl+Shift, because the Shift+letter space is full to the last letter and
because the char hook deliberately ignores every Ctrl-combo -- which is exactly
what leaves this layer free to claim. P is Plate and B is Bed; neither collides
with OrcaSlicer own Ctrl+Shift+S (Save as) or Ctrl+Shift+G (Print plate), and
nothing else in the tree binds either.
The lookup goes ahead of the guard that drops Ctrl-combos, and nothing already
bound changes meaning: a plain Shift+letter still resolves as before, because
the new layer only answers when Ctrl is held as well.
The bed toggle drives the checkbox rather than the viewport alone, so the
control and the view cannot disagree about what is shown, and it says which it
did in the status line.
Both verified on the running build: Ctrl+Shift+B toggles the grid and the
checkbox together, Ctrl+Shift+P commits to Prepare.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
* Add caching system for presets
* Removing user\bundle serialization and keeping it only for system presets
* Integrate caching into WebGuideDialog which speeds up time of SetupWizzard and PrinterSelection dialog
* Add CI\CD step to prepare cache file in ahead of time so user does not need to wait
* Add partial cache generation when only one of the vendros is changed to speed up recalculation time
* Handle corrupted files
* Add cache to GuideDialog as previos version didn't work as expected
* Add inspecting tool and fix CI cache generation
* Generate cache per vendor
* Simplify code by mergin it in PresetBundle
* Simplify code a bit more
* Add cereal serialize() to VendorProfile, PrinterModel, Preset, and Semver
* Remove CachedPrinterModel/VendorProfile/Preset mirror structs from VendorCache
* Fix use-after-free in CallAfter lambda; replace raw thread pointer with unique_ptr
* Use get_vendor_cache_key() to match cache keys written by the app
* Remove BOM added by VSC
* Skip invalid vendors
* Remove leftover cache file
* Fix build for windows arm64
* Revert json cache back
* Update check for stale cache
* Serealize all value fields for Preset class to minimize regression later
* Minimize field duplication by moving Cache thing into PresetBundle
* Add tests for Cache system
* Add a bit more tests
* Merge branch 'main' into feature/cache_profiles_and_optimize_loading_speed
* Rvert from per-verndor to single cache file
Replace N per-vendor .cache files with a single system_presets.cache
that holds all vendors and presets in one serialized blob.
Cache load is now all-or-nothing: on hit all vendors are applied from
the bundle (sub-second); on miss all vendors are parsed from JSON and
a fresh bundle is written to the user cache dir.
Invalidation is driven by bundle_key - a sorted concatenation of all
vendor JSON version strings. Any vendor update invalidates the whole
cache and triggers re-parse on next launch.
Guide wizard (WebGuideDialog) loads the bundled cache into a plain
PresetBundle instead of a separate VendorGuideData struct, removing
the duplicate data model.
generate_system_cache simplified from a per-vendor loop to a single
save_system_presets_cache() call producing one output file.
* Transfer all Preset fields from cache via move assignmet
apply_vendor_preset_group was copying fields manually and missed
bundle_id, user_id, base_id, sync_info, updated_time, key_values,
ini_str. Replace field-by-field copy with move assignment of the
fully-deserialized Preset, then restore the vendor pointer which
is excluded from serialization.
* Ignore cache for future
* Remove not used files
* Ship one preset cache per vendor in place of the profile JSONs
Each vendor's system presets serialize into a single <vendor>.opc built at
package time, and a shipped build carries that file alone — the profile JSON
and its sub-file tree are pruned. The vendor loader, the setup wizard's profile
list and the resource installer all read a vendor through its cache, falling
back to parsing whenever one is absent, stale or unreadable, so the cache stays
an optimization and never a source of truth. Caches hold presets in source form
and resolve inheritance at load, through the same code the JSON path uses.
* Make the preset cache self-describing and load each vendor from the system folder alone
The cached DynamicPrintConfig is keyed by name, through a per-file dictionary of the
distinct opt_keys, the type each was written as, and the distinct enum value names,
instead of by serialization_key_ordinal — a position assigned by declaration order at
static init, where inserting one option shifts every later ordinal and the lookup then
succeeds on the wrong option. Because a name-keyed payload drops the options this build
cannot place rather than being rejected wholesale, the schema fingerprint goes, and with
it the two fallbacks that existed only because an installed cache died on every app
upgrade: the second lookup tier into resources/profiles and the parse fallback to the
same place. A vendor is loaded from <data_dir>/system/ and nowhere else, as on main —
which is what makes the app write its .opc files there again.
* Simplify the preset cache internals after review
* Use the shared temp-dir helper in the preset bundle loading test
* Bound stamp string reads in the preset cache
* Speed up the setup wizard with a profile-data cache
The wizard's per-vendor fast path threw on vendors present only in
resources, falling back to a ~29 s raw JSON scan on every open. Each
vendor now loads from the directory it was found in, and the derived
model/machine/filament/process catalog is cached whole in
<data_dir>/cache/wizard_profile_data.json, stamped by each vendor's
name and version - a fresh cache makes an open one file read, with no
bundle built and no presets installed (~0.2 s vs ~2 s).
* Remove debug SVG dump from a geometry test
* Move the per-vendor cache file format into PresetCacheFormat
* Move the vendor install helpers from PresetBundle into Utils
* rename
* fix flatpak
* change cache version to 1
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Normalize the junction direction vector over XYZE
calc_vmax_junction_deviation() treats the dot product of two jd_unit_vec as a
cosine, but the vectors were scaled by 1 / block.distance, which is the XYZ
length. On an extruding move the E component then pushes the 4D norm above 1 and
the dot product below -1, so the corner reads as straighter than it is and is
planned too fast -- the more so the higher the flow. Measured on a 6 degree
corner at scv 5: 86.9mm/s with no extrusion, 94.4mm/s at 0.029mm/mm, 150.0mm/s
at 0.1mm/mm.
Neither firmware does that. Marlin normalizes over XYZE for any extruding move
(planner.cpp: `if (... || esteps > 0) normalize_junction_vector(unit_vec)`) and
Klipper leaves E out of the cosine entirely, dotting only axes_r[0..2]
(toolhead.py::Move.calc_junction). Normalizing satisfies both: with E normalized
in, the cosine differs from the XYZ-only one by ~1e-5 at printing flow rates.
This is a deliberate divergence from PrusaSlicer, which still scales by
1 / distance -- it carries an older Marlin's behaviour.
Travel moves are unaffected, their vector was already unit length.
Reported by Copilot in review of #15304.
* Test that extrusion rate does not change corner planning
The junction deviation tests were all travel-only, which is exactly why the E
component of the junction vector went unchecked. Cover it: the same corner has
to be planned the same whether nothing, an ordinary 0.42 x 0.2 line, or a fat
large-nozzle line is extruded through it, on both Klipper and Marlin 2.
Reported by Copilot in review of #15304.
Reported on PR #15238: on macOS, drawing a corner rectangle and pressing Enter
on the first dimension opens the second field and then wedges the entire
application — no typing, no Escape, dead menu bar, no tab switching, and the
field stays composited over the desktop after minimising. That last detail is
what identifies it: an already-drawn window keeps being composited by the
WindowServer once the process stops answering. The main thread is stuck.
4c8c93b512 is the only commit that ever changed the second-queued-field path.
It stopped unmapping the value field between two queued dimensions, and its
whole justification is mutter: focus-stealing prevention refuses keyboard focus
to a window that was just re-mapped, which left the second field visible but
dead on GNOME (snaporca-p8uw). It was applied with no platform guard, so macOS
re-activates an already-visible borderless NSWindow at NSModalPanelWindowLevel
from inside wxOSX's pending-event drain — which on macOS runs from a
CFRunLoopObserver at kCFRunLoopBeforeTimers (evtloop_cf.cpp) over an unbounded
`while (!m_handlersWithPendingEvents.IsEmpty())` (appbase.cpp).
One constexpr now carries that choice, and both halves of the contract read it,
because the failure mode of this fix is the two halves drifting apart: open()'s
reuse-if-shown and do_commit()'s deferred hide are one decision, not two.
Not a macOS guess I could not check: the non-GTK branch was exercised on the
Linux rig by forcing the constant to false and rebuilding. A corner rectangle
drew, its first field committed at 60 mm, the SECOND field opened, committed at
40 mm, and the sketch ended at 60.0 x 40.0 mm with the field closed and no
freeze — so the map-afresh path is functionally complete, not merely different.
On GTK the constant is true and every generated instruction is unchanged.
What is still unproven is the exact line where macOS wedges; the reporter has
been asked for a `sample` of the hung process. This fixes the cause the evidence
points at without waiting for that, and cannot regress the GTK behaviour.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Review request on PR #15238: "Place CAD-related files (e.g. CadDocument/
GeometryEngine) into a separate folder."
src/libslic3r/CAD/ the kernel — CadDocument, GeometryEngine, the four
Sketch* units, SketchSolver, ThreadStandards
src/slic3r/GUI/CAD/ the tab — DesignPanel, DesignCanvas, DesignSketchTool,
SketchInlineEditor, McpControl, generated DesignOffer
Pure relocation: no line of logic changes. Two include rewrites follow from it —
files that moved re-spell their own neighbours against src/ (already on the
include path), and files that did not move pick up the new folder. docs and
docs/ux/mockups/gen_offer_table.py follow the same paths.
Verified: libslic3r, libslic3r_gui and libslic3r_tests all build, CAD suite green
at 2518 assertions in 194 test cases, and the sibling fork builds identically —
17 shared sources still byte-identical, 8 diverging by their expected counts.
Review request on PR #15238: "Move the SLVS to deps if the source code remains
unmodified. If any changes were made to the source code, move it to deps_src."
It is unmodified — all 20 files under src/libslic3r/slvs were byte-identical to
JacobStoren/SolveSpaceLib@4d87045, the extraction of solvespace.com's libslvs.
So deps/ it is, fetched by hash like every other dependency.
Only the CMakeLists is ours: upstream's builds a demo executable and installs
nothing, so deps/SLVS/CMakeLists.txt.in replaces it via PATCH_COMMAND — the same
shape deps/OpenCSG already uses. The public header keeps its spelling, so
SketchSolver.cpp still says `#include <slvs.h>` and needs no edit.
The CI deps cache is keyed on hashFiles('deps/**'), so it rebuilds itself.
Verified: dep_SLVS builds and installs, libslic3r links against SLVS::slvs, and
the CAD suite is unchanged at 2518 assertions in 194 test cases.
* Plan corners with junction deviation where the firmware uses it
The time estimator only ever had the classic per-axis jerk model, which limits a
corner by the largest single-axis component of the velocity change. That is
anisotropic: the same corner is allowed sqrt(2) more speed on a diagonal than on
an axis, which paints a four-lobed ripple around every circular wall in the
actual speed and actual flow views, worst on small parts whose walls are made of
short segments.
Klipper has no classic jerk at all and Marlin 2 has none while M205 J is in use;
both plan corners with junction deviation, which sees only the corner angle. Add
that model and use it for those machines:
- Klipper: derived from the square corner velocity, as the firmware does
(jd = scv^2 * (sqrt(2) - 1) / max_accel), reading the scv from
machine_max_jerk_x, where process_SET_VELOCITY_LIMIT() already stores
SQUARE_CORNER_VELOCITY.
- Marlin 2: machine_max_junction_deviation, which was already loaded into the
machine limits but never reached the planner.
- Every other flavor keeps the classic jerk path unchanged.
The model has no per-axis jerk floor, so this also drops the hard slow spot the
estimator drew at the start of every loop from machine_max_jerk_e.
Toolpaths are unaffected: on a full export the only lines that change are M73.
The junction deviation maths, including Marlin's JD_HANDLE_SMALL_SEGMENTS arc
approximation, is ported from PrusaSlicer's src/libslic3r/GCode/GCodeProcessor.cpp.
The Klipper mapping is not in PrusaSlicer, which ignores SET_VELOCITY_LIMIT.
* Add tests for junction deviation corner planning
Cover the three properties the change rests on:
- a right angle on Klipper is planned at exactly the square corner velocity,
the identity that makes the scv to junction deviation mapping correct, and a
shallow corner is planned far faster than per-axis jerk allows;
- junction deviation gives the same speed whatever the corner's orientation,
while classic jerk keeps its sqrt(2) spread, which is the four-lobed ripple;
- machines that do not plan with junction deviation are provably untouched,
including a Marlin 2 printer that has it disabled.
# Description
Printers discovered/bound under one printer agent (e.g. built-in BBL)
were leaking into another, independent agent's "My Device"/"Other
Device" lists and inheriting its saved access code, since neither the
device list nor bind state was ever scoped by which agent found them.
- Add printer_agent_id to MachineObject/BBLocalMachine, stamped at
discovery/bind time; filter get_my_machine_list(),
get_my_cloud_machine_list(), and update_other_devices() by it.
- clear_other_devices() now drops entries stamped by the outgoing
agent on swap, so the incoming agent's own discovery re-inserts and
re-stamps them fresh instead of leaving them stale-tagged forever.
- Scope access_code by (dev_id, printer_agent_id) on BBLocalMachine
(LAN only since cloud's userMachineList is always refreshed live from
the account API, so it isn't at risk the same way), with a
BBL-only legacy fallback to the old flat access_code/user_access_code
keys so existing bindings keep working.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
# Description
Break the recursive include dependency by moving GUI_App.hpp from
HMS.hpp into HMS.cpp. Add the required standard headers and use explicit
std/nlohmann types to remove reliance on transitive includes.
This prevents recursive header inclusion while preserving HMS
functionality.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
# Description
This PR enables building OrcaSlicer on Windows with the **clang-cl
(LLVM)**
toolchain and the **Ninja** generator, in addition to the existing MSVC
path.
Clang is already supported on Linux with this codebase, so this extends
that
support to Windows.
The changes fall into three categories. All are either no-ops on the
existing
MSVC/Visual Studio path or Windows/clang-cl-specific, so the standard
build is
not affected.
### 1. C++ conformance fixes
clang-cl is stricter than MSVC and rejects several constructs that
cl.exe
silently accepted. Each of these is non-conforming code that MSVC
tolerated:
* **Explicit template instantiation in `BoundingBox.cpp`** — clang-cl
does not
instantiate `BoundingBoxBase<Point, Points>::construct` through the same
transitive path MSVC uses; added the explicit instantiation.
* **Eigen cast materialization in `AABBTreeLines.hpp`** — `.cast<T>()`
returns a
lazy `CwiseUnaryOp`, not a concrete `Matrix`; materialized it before
passing to
`distance_to_squared`, which expects a concrete type.
* **`LabelItemType` underlying type in `PresetComboBoxes.hpp`** — gave
the enum
the same `std::size_t` underlying type as `Marker` to resolve a
narrowing
conversion in a switch.
* **`T2A_` cast in `BaseException.cpp`** — explicit `static_cast<const
char*>` on
the ATL conversion helper result.
* **Wide string literals in `GUI_App.cpp`** — used `L""` literals where
concatenated with a `std::wstring` (`url_prefix`).
### 2. Build system / dependencies
* **Exclude clang-cl from MSVC-only CMake guards** — `if(MSVC)` is true
for
clang-cl, so blocks applying cl.exe-only flags now exclude Clang.
* **Disable TBB LTCG** — oneTBB enables MSVC IPO/LTCG by default,
emitting
proprietary `/GL` bitcode objects that `lld-link` cannot consume.
Disabling IPO
produces native COFF, linkable by both `link.exe` and `lld-link`. TBB is
threading infrastructure, so the runtime impact of disabling LTCG is
negligible.
* **wxWidgets target path** — clang-cl uses the MSVC frontend variant on
Windows
but reports compiler id `Clang`, so wxWidgets looked under
`clang_x64_lib`
instead of the `vc_x64_lib` layout the deps are built with.
### 3. Ninja generator support
* **Runtime DLL copy** — the DLL copy step was nested under
`CMAKE_CONFIGURATION_TYPES` (multi-config only), so single-config Ninja
skipped
copying OCCT/GMP/MPFR/WebView2/freetype DLLs next to the executable. Now
runs
for both generator styles, guarded by `if(WIN32)`.
* **`build_release_vs.bat` Ninja target** — `ALL_BUILD` is a Visual
Studio
target; Ninja uses `all`. The script failed with
`ninja: error: unknown target 'ALL_BUILD'` when invoked with `-x`.
## Tests
Built from a clean checkout on Windows with:
* clang-cl 22 (LLVM toolchain bundled with Visual Studio 18)
* Ninja Multi-Config generator
* lld-link as the linker
The full build (deps + slicer) compiles, `OrcaSlicer.dll` links with
`lld-link`,
and `orca-slicer.exe` runs. Verified end-to-end by loading a model,
slicing it,
and generating valid G-code (screenshot below).
The existing MSVC / Visual Studio build path is unaffected — all changes
are
guarded by compiler/generator/platform checks or are conformance fixes
that
compile identically under MSVC.
# Screenshots
<img width="1919" height="1079" alt="image"
src="https://github.com/user-attachments/assets/02082437-db36-4696-a91a-d9acf57d4a52"
/>
Selecting the web Device tab loaded the printer's web UI from the selected discovered machine
when the preset carried no host. That arm was lost merging main into this branch — two of the
three Plater.cpp hunks from #15134 survived, this one did not — leaving the tab blank, since
PrinterWebView starts on an empty URL and nothing else navigates it.
In printer-agents mode the legacy web page was appended under Notebook::PAGE_MONITOR, which
resolves to the same "monitor" id as the native Device tab. FindPageByName returns the first
match, so PluginPages::relayout() — which saves the selection by name and restores it after
rebuilding the tab strip — moved the user off the web tab onto the native one. The tab also
disagreed with its own label, being created as "Device (legacy)" and renamed to "Device (Web)"
on the next show_device() call.
Anthony Cox