# Description
Currently, there is some suspicious behavior going on with the logout
flow, adding some logs to potentially catch any unwanted logouts or
unintentional behaviors.
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
* unify footer
adds "Done" Buttons,
standardize "Reset" Buttons,
adds disabled logic to "Reset" Buttons
* adds ImGuiWrapper::COL_WARNING = ColorRGB:Warning,
replaces ColorRGB::Warning
* consistently display warnings,
moves assermbly warning after footer,
make cut warnings warning color
* adds separator above cut warnings
* adds tooltip entry in move, rotate & scale for auto-drop
* use wrapper tooltip in wrapper->button for consistent text color
* restructures brim ears button,
renames "Reset" button in painting tools to "Erase All",
small styling fixes
* small adjustments,
moves "Edge detection" checkbox in painting tool underneath,
moves "Section View" in Brim ears tool after buttons,
moves warnings in Assemble tool under footer
* small brim ear tool structure changes,
adds separator between "Head Diameter" and "Max angle",
adds tooltip to "Auto-generate" button,
rewords shortcut descriptions to match other tools
---------
Co-authored-by: Hanno Witzleb <hannowitzleb@gmail.com>
* adds UI and preview plane for multiple dovetail cuts
* adds multiple dovetail cuts to perform_with_groove()
* adds ui text info for spacing, adjusts max_val for gap to respect plate dimensions
* adds spacing before multpile UI
* adjusts wording, adjust gap max by count
---------
Co-authored-by: Hanno Witzleb <hannowitzleb@gmail.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Add logic to handle the left, middle and right buttons being assigned to do nothing, pan or rotate
* Add entries for setting the drag actions to preferences
* Allow the label text in preferences to wrap
* Show mouse mappings in Help -> Keyboard Shortcuts
* Re-add preferences in updated layout
* Add camera mouse options under camera
* Change mouse action strings to use L() for localization
* Display "None" when it is selected instead of blank in keyboard shortcuts
---------
Co-authored-by: Rob O <robertolabode@gmail.com>
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
load_selections() and update_selections() size the parallel project_config
arrays (filament_colour, filament_colour_type, filament_map) off
filament_presets.size(). When the saved list is shorter than the printer's
nozzle count — never-used printer, hand-trimmed conf, or fewer filament_NN
entries than nozzles — the loaded colors get truncated and the sidebar
starts up one combo short.
## Summary
- skip CLI thumbnail generation when an OpenGL/GLFW context cannot be
created, allowing export workflows to continue in headless/automation
environments
- guard filament variant remapping against missing config options and
out-of-range variant indexes
- log warnings instead of dereferencing invalid config state during
CLI/profile-driven export
## Context
These guards came out of automating OrcaSlicer CLI exports for printer
workflows. In that flow, slicing/export can still be valid even when
thumbnail rendering is unavailable, but the current path can proceed
into OpenGL thumbnail setup after context creation fails. Separately,
malformed or mismatched filament/profile state can index past option
vectors during multi-filament value remapping.
## Test plan
- `git diff --check`
- `cmake --build build/arm64 --config RelWithDebInfo --target OrcaSlicer
-- -j4`
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
This can be enabled in Preference->Developer->Keep painted feature after
mesh change.
<img width="731" height="633" alt="init"
src="https://github.com/user-attachments/assets/8b195486-538e-4eda-9e77-bfdf1a794306"
/>
TODO:
- [ ] Bug fixes
- [ ] Make it faster
- Keep painting after other mesh operations such as reload from
disk/simplify/boolean operation etc:
- [x] Planar cut
- [x] Dovetail cut
- [x] Cut with part assigned to other side
- [x] Split to parts
- [x] Split to objects
- [x] Mesh boolean gizmo
- [x] Mesh boolean in right click
- [x] Reload from disk/replace stl (won't work well if mesh changed too
much)
- [x] Fix model
- [x] Simplify/smooth (this two won't work well due to too much mesh
changes)
- [x] Add options in settings since I think this will be experimental
for a long time until being tested by a lot of ppl
* Expose Antialiasing velues
Expose Antialiasing multipliers.
Default to 4 as current implementation but enables the user to disable it to improve performante or increase sampling to improve quality.
* FXAA
* Improve descriptions
* Require restart when MSAA setting changes
Detect changes to the OpenGL MSAA (multisample anti-aliasing) preference when opening Preferences and prompt the user to restart the application to apply the change. Adds a constant key for the MSAA setting, stores the previous value, checks for changes (similar to the existing FXAA handling), and shows a warning dialog explaining the restart will close the current project without saving. If the user accepts, recreate_GUI is invoked to apply the MSAA change immediately.
* Revert "Require restart when MSAA setting changes"
This reverts commit dde134d346c3849598c91d025d2faed1b51c8a22.
* Menu and FPS options
* Fix FPS limiter and remove VSYNC
* Grouped FPS settings and mode up rigth fps counter
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
FlowRateCalibrationDialog was missing the SetSizeHints call that every
other calibration dialog in calib_dlg.cpp uses (Cornering, Pa, Pa Pattern,
Max Volumetric Speed, Temperature, Retraction, VFA, Input Shaping). Without
it, the dialog has no enforced minimum size: on wxGTK, iconizing the main
window while the dialog is open triggers a layout/refresh that re-runs
Fit() with transient zero-sized children, collapsing the dialog to ~222x249
px with the OK button clipped and unreachable. The window manager then
honors the (incorrect) small geometry hint, so the user cannot resize it
back manually.
Two changes:
* Add v_sizer->SetSizeHints(this) after Fit() in the constructor, matching
the pattern used by all other dialogs in this file. This locks in the
correct minimum the first time Fit() runs, before any iconize event.
* Remove the redundant Fit() from on_dpi_changed. With SetSizeHints in
place the WM enforces the minimum, but the unconditional Fit() on every
DPI/refresh signal was the trigger for the shrink path; Refresh() alone
is sufficient here.
Co-authored-by: Packerlschupfer <packerl@schupfer.at>
* Add tooltips to Transfer buttons
Set contextual tooltips for the Discard, Transfer and Save buttons when a dependent preset is present. The code computes the previous and new profile names and provides localized explanatory tooltips that clarify that switching will discard changes, transfer "New Value" settings, or save changes into the current profile. This improves UX by making the consequences of each action explicit.
* added some endlines
Co-Authored-By: yw4z <yw4z@outlook.com>
---------
Co-authored-by: yw4z <yw4z@outlook.com>
* Remove unused `get_printer_preset` calls.
* `Plater::check_printer_initialized` should skip nozzle flow type checks if nozzle is unknown.
Also remove unnecessary `is_multi_extruders` check.
* Remove unused `CalibUtils::is_same_nozzle_diameters()` fn.
* Simplify `CalibUtils::check_printable_status_before_cali`.
The single-arity can delegate to the vectorized arity.
* Add `DevExtruderSystem::NozzleDiameterMatchesOrUnknown` to simply checks.
* Update `CalibrationPresetPage::update_sync_button_status()` to use `NozzleDiameterMatchesOrUnknown`.
Simplify logic by iterating over each extruder and checking for diameter and volume type match.
The previous code had several mistakes (from what I could tell):
- `curr_obj->is_multi_extruders()` doesn't imply exactly 2 extruders
- the single/multi branch served no purpose
- the single branch failed to check the volume type
* Specify `std::fabs` and add explicit import.
Ref: https://github.com/OrcaSlicer/OrcaSlicer/pull/13330#discussion_r3133613736
Not sure how idiomatic this is in C++ / OrcaSlicer codebase, but CoPilot suggested it and it seems reasonable.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Support file uploads and the device details page for CC2 printers.
* Resolved build issues for Linux and macOS.
* 1. Added `ElegooPrinterWebViewHandler` to handle WebUI messages for Elegoo printers. Other printers will keep the current behavior.
2. Added a static `get_print_host_webui` method in `PrintHost` to retrieve the printer WebUI URL.
* Improved timeout handling for CC2 file upload and SN info APIs.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* perf: speed up startup and show progress in splash screen
Cold-start was ~15 s. Profiled in GUI_App::on_init_inner: 5 s in
preset_bundle->load_presets (sequential vendor loading of ~3000 JSON
profile files), 3.7 s in new MainFrame(), and a 1.5 s splash screen
that closed long before init finished — so the user stared at a
frozen blank screen for several seconds with no feedback.
Changes:
- PresetBundle::load_system_presets_from_json: parallelize vendor
loading with TBB. ORCA_FILAMENT_LIBRARY is loaded first
synchronously (it is the inheritance base for filaments); the
remaining vendors are loaded in parallel into separate PresetBundle
instances, then sequentially merged. On a typical setup this drops
load_presets from ~5 s to ~3.5 s; the saving scales with vendor
count and CPU cores.
- SplashScreen: remove the wxSPLASH_TIMEOUT flag so the splash stays
visible until the main window is shown explicitly, and add status
updates at each slow init phase ("Loading printer and filament
profiles", "Creating main window", "Loading current preset",
"Showing main window"). The splash is destroyed right after
mainframe->Show(true).
- MainFrame: FileHistory::LoadThumbnails moved to a detached
background thread. The previous synchronous call opened every recent
3MF file at startup — on macOS that triggered the TCC permission
dialog for ~/Downloads mid-launch, freezing the whole app until the
user clicked. Letting it run in the background means the UI is
responsive from the start and thumbnails populate when ready.
* revert: keep LoadThumbnails on the main thread (review feedback)
SoftFever pointed out the detached thread introduces race conditions
(e.g. MainFrame::open_recent_project() reading while the thread writes
m_thumbnails) and that thumbnails may not appear if the homepage shows
before it finishes. LoadThumbnails already uses tbb::parallel_for
internally, so the call-site offload gave no real speedup. Reverted to
the original synchronous call. The macOS TCC-dialog concern that
motivated this will be handled properly in the lazy-init refactor.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
fix(printconfig): register enable_filament_dynamic_map and has_filament_switcher options
PR #13388 (X2D Support) added import/export for these options in
bbs_3mf.cpp but never registered them in PrintConfig.cpp. Loading any
.3mf containing these keys throws UnknownOptionException at
PartPlate.cpp:6153 when config->apply() looks up the missing definition.
* bbl device selector search box
* align file and more menus with its button
* fix multiline inputbox border color on windows
* fix multiline inputbox border color on windows
* preferences: use content width on combobox dropdowns
* about: match version text size on macOS
* msg dialog improvements
* fix canvas menu overlapping with sliced plates toolbar
* bbl bind dialog button placement
* bbl color picker
* Update StepMeshDialog.cpp
* drop file dialog
* drop dialog revert fonts
* revert windows multiline border
* Update StepMeshDialog.cpp
* update
* Flushing Volumes: match style of combobox
* fix hyperlink color on canvas notifications
* fix possible issues with shared profiles notification
