filament_id is the plain mint of the product triple (filament_vendor,
filament_type, filament name), and nothing else feeds it. The tooling used to
accept any salt iteration of a preset's own triple, and its minting policy
stepped past ids that other products held in the tree or in the snapshot, so
which id a product got could depend on history. Every "salt split" in the tree
masked a redundant preset rather than a real need, and no shipped id is
salted, so salting goes entirely: no salt parameter, no id policy object, and
--generate no longer reads the snapshot.
--check now holds every declared and every inherited id to that one value and
lists each preset that misses it, variants under a wrong root included, instead
of folding them into the root's error. Two products whose triples mint one id
is reported as a collision naming both, and --generate refuses to write it;
the remedy is a rename so the triples differ. The Bambu catalog map generator
keys its rows by the same mint rather than by what the tree already ships.
No id changes: all 913 ids in the tree are already the mint of their triple,
so --generate is a no-op and the snapshot is untouched.
"Snapmaker PLA-CF @U1" and "Snapmaker PLA-CF @U1 0.4 nozzle" are the same
product on the same printer: both pin "Snapmaker U1 (0.4 nozzle)", and only a
filament_id salt split kept them apart. The first came with the original U1
profiles (#10225); the second with the tool-changer rework (#15039), which
added the 0.4/0.6/0.8 nozzle variants and left the older preset behind.
Drop the older one and re-mint the 0.4 variant onto OFhQf8ou, the id its 0.6
and 0.8 siblings already carry, so the product holds one id across the three
nozzles; renamed_from redirects the retired name. Users of the retired preset
get the #15039 tuning - 39 keys differ, including nozzle 230 -> 240 C, plate
55 -> 65 C and vitrification 150 -> 45 C - which is what the 0.6 and 0.8
variants already ship.
"Snapmaker PLA-CF @U1 base" stays. #15039 orphaned it by having the nozzle
variants inherit fdm_filament_pla directly, so it is unreferenced, but it is a
base in the vendor's own convention - 10 of the 14 @U1 families with nozzle
variants wire them to one - and it holds U1 loading and cooling values the
variants never set. Wiring them to it would change slicing output, which is
Snapmaker's call to make, not this PR's.
Claude-Session: https://claude.ai/code/session_01Q3zm9HuyskkSb4hynviV99
"Update re:3D profiles" (#13750) added the tuned "@0.4/@0.8 nozzle" and
"@0.8/@1.75 nozzle" variants but kept the five original un-suffixed presets,
trimming each to a stub that overrides only filament_vendor while still
claiming every printer of both nozzles. On any re3D printer the stub was
selectable alongside the ~50-key variant that actually tunes the material,
which is what forced five filament_id salt splits to keep the pair apart.
Drop the stubs. The variants already carry the products' ids, so nothing is
re-minted; renamed_from redirects each retired name to the smaller-nozzle
variant, and "re3D rPETG @0.8 nozzle" additionally takes over the
"re3D Greengate rPETG" mapping that lived on the deleted umbrella. Each
printer model's default_materials now lists the variants for its own
nozzles rather than the stub.
Cubicon's nine "@base" presets were the only instantiated ones of the 196
"@base" filament presets in the library; the other 187 are instantiation:false.
Being selectable, and claiming xCeler-I and xCeler-Plus, they put two presets of
one product on those two printers - which is what forced the nine filament_id
salt splits: one product deliberately kept on two ids so AMS matching stayed
unambiguous.
Flip them to instantiation:false and drop the compatible_printers, setting_id
and filament_settings_id that a base has no use for, matching what the other
150 bases carry. The three "@Cubicon xCeler-{I,Mini,Plus} 0.4 nozzle" variants
keep one printer each, so every printer still sees exactly one preset per
product and they converge on its single id; the nine salted ids retire.
A base is not added to the preset collection, so user presets that inherited
the selectable "@base" - the v2.3.2-v2.4.2 fixtures have one per material -
would lose their parent. renamed_from on the xCeler-I variant, the first model
the base ever claimed, redirects them; a preset built on "@base" while printing
on an xCeler-Plus narrows to the xCeler-I.
The six default_materials / default_filament_profile fields named
"Cubicon PLA @Cubicon xCeler-<model>", dropping the " 0.4 nozzle" the presets
actually carry, so none of them ever resolved; each model now names its own
variant.
Claude-Session: https://claude.ai/code/session_01Q3zm9HuyskkSb4hynviV99
A filament_id is now exactly what the preset's own filament_vendor,
filament_type and filament name mint, wherever it inherits from. Inheriting
settings no longer limits what a preset may claim, so the checks that policed
inheritance are gone, and so are the four grandfather lists that held thousands
of presets as permanent exceptions. The snapshot records sanctioned state rather
than excuses: one entry per id, carrying the product it names beside the presets
claiming it.
Profiles that disagreed are corrected instead of excused. The Elegoo TPU and
PAHT roots were named for a different product than all of their variants and
become TPU 95A and PAHT-CF; Elegoo PET-CF gains the filament_type its variants
already set; the Snapmaker breakaway support presets get an id of their own
rather than riding the PVA chain; and a BBL preset name carrying a doubled space
is fixed behind renamed_from. Their ids re-mint from the corrected identities.
The tooling and the design note also drop the word "family", which invited
reading a brand's Lite and Pro spools as one id.
No change to slicing output — only filament_id values, three preset names, the
inherits lines following those renames and the vendor indexes move.
Orca content-addresses every system filament, Bambu's included, but a printer,
its AMS and its vendor's cloud know only that vendor's own catalog ids. The
printer agent now translates between the two: outbound MQTT and FTP traffic, the
AMS mapping sent with a print job, and the ids written into a 3mf bound for the
printer all leave in the printer's own ids, while status messages, loaded
projects and SD-card prints arrive in Orca's. An id with no mapping passes
through unchanged, and an agent whose printers already speak Orca's ids
translates nothing at all.
Bambu's map is generated from BambuStudio's own shipped bundle; a missing or
unreadable file leaves every lookup an identity rather than taking the app down.
The profile check validates the map's shape, and profile CI now runs on the paths
that can change it. docs/HLSD/filament_id.md records the places the map
deliberately does not reach.
The tree-wide length check (freed from its BBL/OFL carve-out last commit)
was flagging 21 pre-existing SeeMeCNC files that no vendor index references
and that therefore never load, turning CI red for files with no bearing on
what ships. The rule now only fires on presets a vendor's filament_list
actually references; every .json under the vendor's filament directory is
still parsed through the duplicate-key hook, so that coverage is unchanged.
Also removed a duplicated BAMBU_MAP_PATH definition: update_bambu_filament_ids.py
now imports the constant from assign_filament_ids.py, which it already imports
several other constants from, instead of recomputing the same path independently.
Every vendor's filament_id declarations, Bambu's own bundle included, are now
minted and checked the same way: the GF* catalog space is reserved but
ownerless, format is validated unconditionally with no snapshot or BBL
exemption, and both --remint and the default assign pass treat a non-OF
declaration as one needing a fresh mint (so a future BambuStudio sync
self-heals instead of needing a manual pass). A new check validates
resources/printers/bambu_filament_ids.json against the tree it describes:
that it parses, carries its header, keys only OF ids, maps each Bambu id once,
and agrees with the tree on every product it shares. The redundant BBL/OFL
carve-out in the profile checker's length check is dropped too, so it runs
the same way for every vendor.
The BBL bundle itself hasn't been touched yet and still declares its old GF
ids, so TestRealTree.test_shipped_snapshot_matches_tree is expected to fail
here (209 declarations flagged) until the next commit re-mints the bundle
onto OF ids.
scripts/update_bambu_filament_ids.py derives resources/printers/bambu_filament_ids.json
from BambuStudio's own shipped BBL bundle (cloned from upstream, or read from a local
checkout via --bambustudio-dir), pairing each Bambu catalog id with the Orca filament_id
we already ship for that product where we ship one, else a freshly generated one. Nothing
reads the map yet; later work uses it to translate ids at the Bambu printer boundary.
The sweep now validates each printer with the filament that printer ships, so a run
over every vendor reports what a single-vendor run does. Validator only - no change
to slicing output or shipped profiles.
These dialogs treated a filament with no compatible_printers as compatible with
nothing, while the rest of the app treats it as compatible with everything, so
the entire Orca Filament Library was missing from the AMS material and
calibration filament lists. They now resolve compatibility the same way the
plater does, and a vendor profile still supersedes the library generic of the
same name.
wxImage with static_data set stores the pointer and never copies it, so the
frame handed to wxMediaCtrl3 aliased AVVideoDecoder::bits_. That buffer is
rewritten by the next sws_scale with the mutex released, reallocated by
bits_.resize() when the window grows, and freed outright when the decoder
leaves PlayThread's loop body at end of stream, all while the GUI thread may
be painting from it.
Windows is unaffected either way, since toWxBitmap already copies the bits
into GDI.
* Keep mixed-color filaments intact when the extruder count changes
The extruder-count spinner resized the filament arrays in bulk at the tail,
which is where mixed-color slots live, so a new filament landed behind the
mix and the sidebar skipped a slot number. It now adds and removes one slot
at a time through the same calls the sidebar's +/- buttons use, so a new
slot opens ahead of the mixed tail and a removal renumbers object filament
ids, painted facets, custom g-code and mixed components rather than
clamping them away.
Drops the vector overload of set_num_filaments(), which this leaves without
callers.
# Description
This PR ports the color mixing feature from BambuStudio.
The port is based on the previous work by @ianalexis in #15231.
This PR completes the port and fixes various bugs.
Several improvements were also made during the porting process.
WIP
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The sidebar Mixed Filament list, the extruder icons, the color painting
gizmo and the canvas filament bar now show the same bottom-to-top fade the
Edit Mixed Filament preview shows, custom gradient curves included, instead
of a horizontal fade between the two component colours. Ordinary and vendor
multi-colour filaments are drawn exactly as before.
Mixed-colour slots are virtual and never flushed. Guard auto_calc_flushing_volumes_internal against them as BambuStudio does, and make the flushing dialog's default matrix and the sidebar 'modified' comparison physical-only so the untouched mixed rows no longer count as a user edit and the Re-calculate result matches the physical-only table.
All 264 QD_* declarations re-derive from their family triples via
--remint Qidi. Only 8 family ids are new: most QIDI-brand products already
carried v3.2-minted ids on older printer series, so the QD-series
declarations converge onto them (QD_0..4_1_1 -> OFKIQO2W "QIDI PLA
Rapido"), and the six Generic families converge onto the shared generic
ids (Generic PLA -> OFDSrzZ8 etc.) by triple math -- no inherits or
compatible_printers changes anywhere.
--update-snapshot retires all 204 QD_* ids with mode-rule successors.
Audit: 204/204 non-null successors, every chain ends at a live id; the
four ids hardcoded in QidiPrinterAgent's non-numeric-series fallback
resolve to the OFL generics (QD_1_0_1 -> OFDSrzZ8, ...). The v4.1 agent
hook translates device-composed QD_* ids through these entries at
runtime, so box behavior is preserved on updated clients.
Known accepted residue (plan v4 SS4): three case/spelling family splits
keep distinct ids for one product line each -- QIDI PC-ABS-FR (series
1-2) vs QIDI PC/ABS-FR (series 3-4) vs Qidi PC-ABS-FR (X-Plus 4), and
QIDI TPU 95A-HF vs Qidi TPU 95A-HF. Renames are ruled out; the ledger's
per-series successors keep each device slot resolving to the right
presets, and a future upstream name unification self-heals through
content addressing.
The code<->ledger lockstep test is now active (un-skipped).
Gates: --check 0; orca_extra_profile_check 0/0; 117 script tests OK
(0 skipped); validator base, -f tree-wide, -v Qidi all exit 0;
libslic3r_tests green; Qidi profile diff is filament_id-value-only.
Qidi.json version bumped.
- is_island_declaration: only BBL remains an island; Qidi QD_* declarations
now enter the triple bookkeeping (checks 3 and 8, --remint's domain).
- reserved_space_owner: QD_* stays reserved but ownerless -- no vendor may
declare it, --update-snapshot refuses new QD_* ids outright, and vanished
QD_* ids take the retired-with-successor path instead of the island
release-with-hint path. New reserved_space_desc() names the space in
check 6 / sanction-gate messages.
- Check 1 drops the vendor-Qidi QD_* format exemption; --add-hint now
refuses QD_* keys (island space is GF* only); docstrings updated.
- Snapshot regenerated: the 204 QD_* declarer triples are now recorded
(declared triples 1113 -> 1317); ids/claims unchanged.
- Tests updated for the flip; new (skipped until v4.2b) lockstep test
asserting the QidiPrinterAgent fallback QD_* literals stay retired
ledger keys chaining to live ids.
Tree state is untouched: presets still declare their QD_* ids, all
grandfathered by the snapshot. --check exit 0; 117 script tests OK.
QidiPrinterAgent composes QD_<series>_<vendor>_<typeidx> setting ids from
device enums and previously degraded any slot whose id matched no visible
preset to generic-by-type. Plan v4.2 retires every QD_* preset id to the
succession ledger, so insert the ledger walk between the direct match and
the generic fallback: a composed QD_* id now forwards to its family's
minted OF* successor exactly like every other retired id.
Behavior-neutral until the ids are actually retired (the ledger holds no
QD_* keys yet, and live QD_* presets still match directly).
Also documents the code<->ledger lockstep on the hardcoded non-numeric-
series fallback table (QD_1_0_1/_11/_41/_50) and adds a C++ test pinning
that the succession walk is key-format agnostic.
Gates: libslic3r_tests [filament_id] 14 assertions green; libslic3r_gui
compiles.
Selecting the web Device tab loaded the printer's web UI from the selected discovered machine
when the preset carried no host. That arm was lost merging main into this branch — two of the
three Plater.cpp hunks from #15134 survived, this one did not — leaving the tab blank, since
PrinterWebView starts on an empty URL and nothing else navigates it.
In printer-agents mode the legacy web page was appended under Notebook::PAGE_MONITOR, which
resolves to the same "monitor" id as the native Device tab. FindPageByName returns the first
match, so PluginPages::relayout() — which saves the selection by name and restores it after
rebuilding the tab strip — moved the user off the web tab onto the native one. The tab also
disagreed with its own label, being created as "Device (legacy)" and renamed to "Device (Web)"
on the next show_device() call.
* Add /bot merge for delegated vendor profile maintainers
Vendor profile PRs no longer need a maintainer with repository write access: an
account listed in the FOLDER_MERGERS variable can squash-merge a PR confined to
the folders it owns by commenting /bot merge on it. Anything reaching outside
that grant, targeting a branch other than main or release/*, or missing a green
Check profiles run is declined with a comment naming the offending files.
Grants live in the merge-delegation environment, so only an admin can change who
may merge, and MERGE_BOT_DRY_RUN stops all merging without a code change.
Check profiles now also runs on release/* pull requests; nothing else changes
for existing contributors.
* Add profile version bump to the code review checklist
Without the bump in resources/profiles/<Vendor>.json, a preset change never
reaches existing installs over the air.
Brings in 560 commits (merge base 2026-07-04 .. origin/main af9fd10d7a).
19 conflicts resolved; the other 138 touched files auto-merged.
Conflict resolutions
- Snapmaker/Polymaker (7): main normalised JSON key order in #15039 while this
branch inserted filament_id/filament_vendor. Took main's key order and kept
this branch's values, inserting a single filament_id key rather than letting
git's line merge leave duplicate "from"/"instantiation" keys.
- re3D rPETG @0.8/@1.75 nozzle (2): main renamed these from "re3D Greengate
rPETG @*" and re-vendored GreenGate3D -> re3D (#15169). Git's rename-aware
merge produced a file with two filament_vendor keys; took main's version
wholesale instead. The id is reconciled by the tooling, not by hand.
- re3D rPP (1): kept main's inherits change (fdm_filament_pet -> fdm_filament_pp,
local filament_type override dropped) and its widened compatible_printers.
The flattened type is still PP, so the product triple and id OFfHGM1D are
unchanged.
- re3D Greengate rPETG.json, Afinia {ABS+,ABS,PLA,TPU,Value ABS,Value PLA}.json
(7 modify/delete): accepted main's deletions. The Afinia ids are not orphaned
- the surviving @HS presets resolve the same triple and already carry the
same ids, so nothing is retired.
- .github/workflows/check_profiles.yml: kept both main's new "validate slice"
step and this branch's tree-wide filament-subtype check.
- tests/libslic3r/CMakeLists.txt: kept both test_filament_id_succession.cpp and
main's test_preset_diff.cpp.
Verified
- No conflict markers; all 12795 profile JSONs parse with no duplicate keys.
- All branch artifacts (tooling, snapshot, ledger, doc, tests) intact and
unmodified by the merge.
- The succession-ledger C++ call sites survived main's refactors; audited
Preset.{cpp,hpp}, PresetBundle.cpp, DeviceManager.cpp, PresetComboBoxes.cpp,
CaliHistoryDialog.cpp, MoonrakerPrinterAgent.cpp against base/ours/theirs.
- scripts/tests: 115/116 pass.
Known follow-up: assign_filament_ids.py --check reports 243 errors, all from
filament data main added in the last month (BBL/addnorth, Qidi X5/Plus 5,
Snapmaker U1, re3D). The single failing unit test is the live-tree conformance
test asserting that count is zero. Reconciliation lands separately.
# Description
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
The prime tower reserved its footprint from the prime volume alone,
ignoring the flush volumes it actually has to hold, so on a multi-colour
print the tower shown in Prepare and the space kept clear for it during
arrange could be far smaller than the tower that gets sliced — leaving
it overlapping objects or running off the plate. This sizes the estimate
from the configured flush volumes instead, for rib walls as well as
rectangle and cone, applies the same height-based minimum depth the
prime-volume estimate already used, and reads the flush matrix correctly
on multi-nozzle printers, where it holds one block per nozzle.
Only the pre-slice estimate changes: the generated tower is untouched,
and prints that do not purge into the prime tower keep their existing
size.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
Prime towers reserved depth from the prime volume alone, ignoring the flush
matrix: rib-wall towers in both the engine and the preview, and rectangle and
cone towers in the preview, which never carried the flush-aware estimate the
engine already used. The preview also read the print preset, which does not
carry the printer- and filament-scope keys the estimate needs and so silently
fell back to defaults. On multi-nozzle printers the flush matrix, which holds
one block per nozzle, was additionally read as a single block. The tower could
come out too small for the purge it has to hold.
The flush-based estimate also skipped the height-based minimum depth that the
prime-volume one applies, so low-flush prints could estimate a tower shallower
than the one that actually gets built.
# Description
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
On delta, circular and custom bed shapes — and on multi-nozzle printers
where each carriage only reaches part of the plate — the prime tower was
positioned and clamped against the bed's bounding box, so it could be
parked in a corner the bed does not actually have. Neither the default
placement nor dragging the tower would pull it back onto the bed, and
slicing went ahead without complaint. The tower's default position, its
drag clamp and the slice-time validation now all follow the real
printable outline, and a tower that genuinely does not fit is reported
as "Prime Tower is partially outside the printable area" instead of
being sliced into a print that cannot be produced.
The travel that approaches the tower is planned against that same
outline. Previously the router gave up whenever its clearance box fell
outside the bed and drove the nozzle straight across the tower; a tower
parked near the bed edge now keeps its detour and enters through the
wall opening as intended.
This also corrects the footprint the prime tower validation uses for a
rotated tower, which was being rotated by the wrong amount and about the
wrong point, so proximity warnings and exclusion-area errors for rotated
towers were being computed against the wrong shape.
Prime tower placement on rectangular beds is unchanged. The new
printable-area validation and the tower-approach routing fix apply to
every bed shape.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
Added unit coverage for the placement clamp against a non-rectangular
outline (a regular hexagon standing in for the shipped delta beds),
covering the rectangular-bed path, single-axis clamping while dragging,
a footprint already inside the outline, one sitting in the bounding-box
corner but off the bed, an unresolved auto brim width arriving as a
negative margin, and a footprint too large for the bed. The `fff_print`
suite passes.
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The placement clamps and the tower-approach router both stood in the bed's
bounding box for the bed itself, so on a delta or hexagonal bed the prime tower
could be parked in a corner that does not exist and the nozzle could be routed
across it. Both now test the real printable outline, slicing reports a tower
that does not fit instead of printing it off the bed, and a tower parked near an
edge is routed along the clamped side rather than falling back to a straight
line across the tower.
Also fixes the placement validation rotating the tower hull by degrees read as
radians about the plate origin, and never rotating the generated tower footprint
at all.
# Description
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
Adds **Wait for temperature on wipe tower**, a printer option for
multi-extruder
machines using a Type 2 wipe tower. With it on, the new tool is picked
up without a
blocking temperature wait; the printer travels to the wipe tower and
waits there
right before purging, parked beside the tower so the ooze from the
heat-up lands
next to it rather than on the model. The incoming filament's target is
raised ahead
of the tool change, so the heat-up overlaps both the change itself and
the travel to
the tower.
The benefit is less oozing and less dead time. The tool no longer sits
at full print
temperature while it waits to be picked up or right after it undocks —
it heats on
the move and only reaches temperature once it is over the tower, so
there is far less
hot-and-idle time, and what does ooze ends up beside the tower. This
matters most on
tool changer printers with long docking and attaching cycles, such as
Tapchanger and
StealthChanger machines, where that wait is otherwise pure stall time
spent dripping.
The firmware or tool change macro must not wait for the temperature
itself. The
option is off by default and only shown for multi-extruder printers on a
Type 2 wipe
tower, and it is enabled by default for the generic toolchanger profile.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
New Catch2 cases in `tests/fff_print/test_multifilament.cpp`: the wait
moves to the
tower when enabled, priming pre-heats to the first layer temperature,
the park side
is regenerated when the tower is moved or rotated, and a regression test
pinning the
unchanged (option-off) toolchange temperature commands against a
recorded trace
(`tests/data/wipe_tower_temperature_trace_main.txt`).
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
Adds a printer option that picks up the new tool without a blocking temperature
wait, travels to the wipe tower, and waits there right before purging, parked
beside the tower so the ooze from the heat-up lands next to it rather than on the
model. The incoming filament's target is raised ahead of the tool change, so the
heat-up overlaps both the change itself and the travel to the tower.
Off by default, and only offered for multi-extruder printers using a Type 2 wipe
tower; the generic toolchanger profile enables it.
# Description
On Klipper the wipe tower's motion-queue synchronization silently did
nothing. Klipper acts on commands the moment it parses them, and its
`G4` reads only `P` in milliseconds — it ignores `S` — so the `G4 S0`
the tower used to flush the queue before a temperature change never
synchronized anything, and the cooling delay after a filament's cooling
moves passed instantly instead of waiting. The tower now emits `M400`
for the flush and `G4 P<ms>` for the dwell when the flavor is Klipper.
Only `gcode_flavor = klipper` is affected; G-code for every other flavor
is byte-identical, so no shipped profile or existing project file
changes.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The wipe tower's "Delay after unloading" never happened on Klipper. It was
emitted as G4 S<seconds>, and Klipper's G4 reads only the P parameter, in
milliseconds, so the pause was silently skipped. The option now produces a
dwell Klipper actually performs.
Also corrects the planner flush rationale, which cited an extruder position
reset that Klipper resolves at parse time and does not need synchronized, and
adds end-to-end coverage that slices a two-filament print and checks the
emitted wipe tower G-code on both a Klipper and a non-Klipper flavor.
No change to any other firmware flavor's output, and no shipped profile sets a
non-zero delay, so no shipped profile's output moves either.
The wipe tower emitted G4 S0 to make the firmware finish its queued moves
before commands that must not take effect early. Klipper's G4 reads only the
P parameter, so that flush never happened there and a temperature change could
land seconds ahead of the moves it was meant to follow. Klipper now gets M400
instead, through one helper shared by both wipe tower implementations.
No change to any other firmware flavor's output, so no shipped profile or saved
project is affected.
* update snapmaker profiles. largely ported for Snapmaker Orca fork
* update prime volume
* set precise_outer_wall to 1
* Update per-material multi-tool ramming to the filament library
* Add per-filament overrides for toolchange retraction
* Set toolchange retraction per filament for Snapmaker U1
* set default support type to tree
* format snapmaker profiles
The linear approximation used a heuristic segment count clamped to 4..16, so the
lift ran as a coarse polygon. Every vertex is a direction change large enough to
hit the firmware's jerk limit, forcing a decelerate/accelerate at each corner —
the lift micro-stutters instead of running at speed. The segment count now comes
from the chord deviation against the slicing resolution, reusing
Geometry::ArcWelder::arc_discretization_steps, which keeps the turn at each
vertex shallow enough for the firmware to carry speed through the whole move.
Points are emitted through GCodeG1Formatter so they carry the same quantization
as the rest of the G-code, and the move comment now trails the feedrate line to
match _travel_to_z and the G2/G3 branch. No change when arc fitting is enabled.
SoftFever