Follow-up to #14785. Routes the tests that still hand-rolled temp paths through
the shared helpers and unifies the temp guards.
- Add ScopedTemporaryDir and a shared ScopedTemporaryPath base under it and
ScopedTemporaryFile.
- Move test_3mf's round-trip .3mf output out of the TEST_DATA_DIR source tree
(a fixed-name leak) and test_toolordering's fixed-name temp .gcode (a sharding
collision) onto ScopedTemporaryFile.
- Move test_config, test_slicing_pipeline_bindings, the test_3mf backup dirs, and
test_preset_bundle_loading onto the guards.
- Make slic3rutils ScopedDataDir compose ScopedTemporaryDir; dedupe
test_network_versions' fixture and delete test_plugin_lifecycle's duplicate.
* fix(GUI): honor "Ignore" when layer height exceeds the configured maximum
Entering a layer height above the printer's max_layer_height on the Print
Settings tab fired two guards in sequence. Tab::on_value_change prompts
"...Adjust to the set range automatically?" with an Adjust/Ignore choice, and
ConfigManipulation::update_print_fff_config then showed an OK-only "Too large
layer height. Reset to X" dialog whose result was never checked, so it always
reset the value. The second guard overrode the user's "Ignore", resetting the
layer height regardless.
Changes:
- Extract the shared Adjust/Ignore dialog into
ConfigManipulation::layer_height_out_of_range_dialog, reused by the tab
(Tab::on_value_change) and the per-object/part settings panels. The dialog now
names the value it will clamp to and reads correctly for too-low as well as
too-high.
- The tab/plate path is already covered by Tab::on_value_change, so the
duplicate reset is dropped from update_print_fff_config.
- The per-object/part panels have no on_value_change hook, so add
ConfigManipulation::check_object_layer_height and call it from the object
settings update paths, gated on the edited option (changed_opt_key ==
"layer_height"). It prompts once per layer-height edit and does not re-prompt
when unrelated object settings change after the user chose "Ignore".
Fixes#14214
* refactor(GUI): unify the layer-height range check across tab and object panels
Copilot review of #14369 noted that the per-object check only guarded the
max at extruder 0 and skipped the too-low case, diverging from the tab.
Move the whole range check into ConfigManipulation::check_layer_height,
used by both Tab::on_value_change and the per-object/part panels. It takes
the widest [min, max] window across the printer's extruders, offers
Adjust/Ignore in both directions, and resets a near-zero value. The tab's
inline block collapses to one call, dropping the duplicated limit logic.
* fix(GUI): only enforce layer-height limits that are actually set
max_layer_height defaults to 0 (unset), so the unconditional range check
offered to clamp any layer height to 0 on presets that don't define it.
Guard each branch (near-zero, too-high, too-low) so an unset limit disables
that direction; the slice-time nozzle-diameter check still applies.
Also run check_layer_height before update_print_fff_config in the object
panels so a near-zero per-object value prompts the same way the tab does,
with update_print_fff_config's fallback still covering the no-minimum case.
_update_select_plate_toolbar_stats_item(true) runs from
on_action_slice_all before the select-plate toolbar has necessarily been
initialized. m_all_plates_stats_item is only assigned in
_init_select_plate_toolbar, so slicing a multi-plate project shortly
after startup (before the Preview tab has rendered) leaves the pointer
null while show_stats_item is true, and the branch dereferences it,
crashing with SIGSEGV.
Every other dereference of this pointer already null-checks it. Add the
same check here so the all-plates stats item is left unselected until the
toolbar is initialized instead of crashing.
Fixes#15116
min_length_factor and is_top_or_bottom_layer had no default initializers, and the FillConcentric/FillConcentricInternal callers never set them, so WallToolPaths::removeSmallLines() thresholded on stack garbage. Which short extrusion lines it dropped then depended on memory layout, so concentric solid-infill output was nondeterministic between runs and across machines. Give every member a default, matching the adjacent FillParams. The perimeter path was already fine because it builds the struct via make_paths_params().
* Add the Qidi Plus 5
* Remove ignored profiles
Qidi didn't register these, so they are essentially dead weight.
* Set Qidi profile version to 02.04.00.10
* Review AI changes
* Part 2
* Part 3
* Part 4
God bless Ian Alexis
* Part 5
* Final part!
* Catches by Gemma
This 6-minute check probably saved me a week
* Tweak
* Update OrcaSlicer_ru.po
## Problem
`Toolchange temperature commands are unchanged when the wipe tower wait
is off`
(added in #15144) fails on both Linux runners and passes on Windows and
macOS.
It is the only failing test in the suite, and it has been failing on
main since
that PR merged.
| Job | Result |
| --- | --- |
| Windows x64 / Unit Tests | pass |
| Windows arm64 / Unit Tests | pass |
| macOS arm64 / Unit Tests | pass |
| Linux x86_64 / Unit Tests | **fail** |
| Linux aarch64 / Unit Tests | **fail** |
From the merge commit
([Linux
x86_64](https://github.com/OrcaSlicer/OrcaSlicer/actions/runs/31072382258/job/92531704095),
[Linux
aarch64](https://github.com/OrcaSlicer/OrcaSlicer/actions/runs/31072382258/job/92531704075)),
still reproducing on current main:
```
first difference at trace entry 29
main: M104 S240 T0 ; preheat T0 time: 31s lead 30.9s
branch: M104 S240 T0 ; preheat T0 time: 30s lead 30.3s
```
## Cause
Each preheat entry records the same quantity twice: `lead` at one
decimal, and
`time:` inside the command text as that value rounded to a whole second.
`split_lead` already compares `lead` with a 0.5s tolerance and explains
why the
estimate moves. `time:` sits in the exactly-compared command text, so it
never
got that tolerance — and being rounded, it flips on a drift far below
0.5s
(30.4 and 30.6 render as `30s` and `31s`). Entry 29 is the only entry in
the
163-entry golden whose lead rounds up; every other preheat sits at
30.0–30.4 and
rounds down, which is why it is the only one that fails.
The variation is per-toolchain, not run to run. Both Linux arches
produce
exactly `lead 30.3s`; Windows x64/arm64 and macOS arm64 all produce
exactly
`30.9s`. Repeated local runs are byte-identical. macOS arm64 passing
while Linux
aarch64 fails rules out the ISA — it is floating-point accumulation over
a few
thousand move durations under GCC vs Clang vs MSVC.
The mechanism makes it discrete rather than gradual: the backtrace parks
the
preheat at the first exported line at least `preheat_time` before the
tool
change, so `lead` is `preheat_time` plus the leftover of whichever move
that
landed on. A sub-tenth difference selects the neighbouring move and
`lead` steps
by that move's whole duration.
Entries 1–28 match exactly, including five earlier preheats whose leads
fall
inside the existing tolerance, so the toolpaths themselves are
identical. I also
reverted the two prime-tower commits that landed between the golden's
capture
point and now, rebuilt, and got a byte-identical trace — this is not
behavioural
drift.
That also rules out regenerating the golden: no single capture satisfies
all
three toolchains, and recapturing on Linux would turn the three
currently-green
runners red.
## Fix
Test-only.
- `lead` keeps a tolerance, widened to 1.5s (measured drift 0.6s; a
preheat
actually leaving its backtrace position would move by tens of seconds).
- `time:` is **not** compared across runs at all. Being a rounding of
`lead`, it
carries nothing the tolerance does not already cover, and comparing it
across
runs can only reproduce the flake. It is instead checked against its own
entry's `lead` — a correct rounding keeps `|time - lead| <= 0.5`.
That second point matters: simply tolerating `time:` numerically would
have made
the test blind to a real change, because drift and a wrong rounding both
move it
by 1. The self-consistency check keeps that coverage. I verified it by
changing
`(int) std::round(time_diffs[0])` to `(int) time_diffs[0]` in
`GCodeProcessor::export_lines` — the test fails with
`"time:" is not its entry's "lead" rounded to a whole second`, where a
plain
tolerance would have passed silently.
Everything else is still compared exactly: all M104/M109 values, tool
ids,
block markers, ordering, entry count, and the annotation text including
its
trailing `s`. The other 138 entries remain byte-exact.
No production code, no golden regeneration. The golden file and these
helpers
are used by this one test and nothing else, and the tolerance only
widens, so
Windows and macOS keep passing unchanged. A note is added to the
golden's header
so the next mismatch in those fields is not "fixed" by recapturing.
## How to verify
Before, on Linux:
```bash
git checkout main && ./build_linux.sh -t
ctest --test-dir build/tests -R "Toolchange temperature commands are unchanged" --output-on-failure
# fails at trace entry 29
```
After:
```bash
cmake --build build --config Release --target fff_print_tests
ctest --test-dir build/tests --output-on-failure # 463/463
```
Fix Windows crash in Replace all with 3D file
Keep the replacement result message as wxString and substitute the volume
name directly.
On Windows, wxString::ToStdString() cannot encode the Unicode status icon
through the active ANSI code page and returns an empty string. Passing that
empty string to boost::format with a volume-name argument throws
boost::too_many_args and exits OrcaSlicer.
* Fix redundant QIDI startup tool changes
Guard Q2, X-Max 4, and X-Plus 4 filament-change G-code so same-tool startup selections do not run the full cut, unload, and purge sequence.
* Guard Q2C against redundant startup tool changes
Skip the complete filament-change sequence when the requested tool is already selected during startup.
* Bump Qidi profile version
# Description
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
The prime tower reserved its footprint from the prime volume alone,
ignoring the flush volumes it actually has to hold, so on a multi-colour
print the tower shown in Prepare and the space kept clear for it during
arrange could be far smaller than the tower that gets sliced — leaving
it overlapping objects or running off the plate. This sizes the estimate
from the configured flush volumes instead, for rib walls as well as
rectangle and cone, applies the same height-based minimum depth the
prime-volume estimate already used, and reads the flush matrix correctly
on multi-nozzle printers, where it holds one block per nozzle.
Only the pre-slice estimate changes: the generated tower is untouched,
and prints that do not purge into the prime tower keep their existing
size.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
Prime towers reserved depth from the prime volume alone, ignoring the flush
matrix: rib-wall towers in both the engine and the preview, and rectangle and
cone towers in the preview, which never carried the flush-aware estimate the
engine already used. The preview also read the print preset, which does not
carry the printer- and filament-scope keys the estimate needs and so silently
fell back to defaults. On multi-nozzle printers the flush matrix, which holds
one block per nozzle, was additionally read as a single block. The tower could
come out too small for the purge it has to hold.
The flush-based estimate also skipped the height-based minimum depth that the
prime-volume one applies, so low-flush prints could estimate a tower shallower
than the one that actually gets built.
# Description
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
On delta, circular and custom bed shapes — and on multi-nozzle printers
where each carriage only reaches part of the plate — the prime tower was
positioned and clamped against the bed's bounding box, so it could be
parked in a corner the bed does not actually have. Neither the default
placement nor dragging the tower would pull it back onto the bed, and
slicing went ahead without complaint. The tower's default position, its
drag clamp and the slice-time validation now all follow the real
printable outline, and a tower that genuinely does not fit is reported
as "Prime Tower is partially outside the printable area" instead of
being sliced into a print that cannot be produced.
The travel that approaches the tower is planned against that same
outline. Previously the router gave up whenever its clearance box fell
outside the bed and drove the nozzle straight across the tower; a tower
parked near the bed edge now keeps its detour and enters through the
wall opening as intended.
This also corrects the footprint the prime tower validation uses for a
rotated tower, which was being rotated by the wrong amount and about the
wrong point, so proximity warnings and exclusion-area errors for rotated
towers were being computed against the wrong shape.
Prime tower placement on rectangular beds is unchanged. The new
printable-area validation and the tower-approach routing fix apply to
every bed shape.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
Added unit coverage for the placement clamp against a non-rectangular
outline (a regular hexagon standing in for the shipped delta beds),
covering the rectangular-bed path, single-axis clamping while dragging,
a footprint already inside the outline, one sitting in the bounding-box
corner but off the bed, an unresolved auto brim width arriving as a
negative margin, and a footprint too large for the bed. The `fff_print`
suite passes.
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The placement clamps and the tower-approach router both stood in the bed's
bounding box for the bed itself, so on a delta or hexagonal bed the prime tower
could be parked in a corner that does not exist and the nozzle could be routed
across it. Both now test the real printable outline, slicing reports a tower
that does not fit instead of printing it off the bed, and a tower parked near an
edge is routed along the clamped side rather than falling back to a straight
line across the tower.
Also fixes the placement validation rotating the tower hull by degrees read as
radians about the plate origin, and never rotating the generated tower footprint
at all.
# Description
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
Adds **Wait for temperature on wipe tower**, a printer option for
multi-extruder
machines using a Type 2 wipe tower. With it on, the new tool is picked
up without a
blocking temperature wait; the printer travels to the wipe tower and
waits there
right before purging, parked beside the tower so the ooze from the
heat-up lands
next to it rather than on the model. The incoming filament's target is
raised ahead
of the tool change, so the heat-up overlaps both the change itself and
the travel to
the tower.
The benefit is less oozing and less dead time. The tool no longer sits
at full print
temperature while it waits to be picked up or right after it undocks —
it heats on
the move and only reaches temperature once it is over the tower, so
there is far less
hot-and-idle time, and what does ooze ends up beside the tower. This
matters most on
tool changer printers with long docking and attaching cycles, such as
Tapchanger and
StealthChanger machines, where that wait is otherwise pure stall time
spent dripping.
The firmware or tool change macro must not wait for the temperature
itself. The
option is off by default and only shown for multi-extruder printers on a
Type 2 wipe
tower, and it is enabled by default for the generic toolchanger profile.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
New Catch2 cases in `tests/fff_print/test_multifilament.cpp`: the wait
moves to the
tower when enabled, priming pre-heats to the first layer temperature,
the park side
is regenerated when the tower is moved or rotated, and a regression test
pinning the
unchanged (option-off) toolchange temperature commands against a
recorded trace
(`tests/data/wipe_tower_temperature_trace_main.txt`).
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
Adds a printer option that picks up the new tool without a blocking temperature
wait, travels to the wipe tower, and waits there right before purging, parked
beside the tower so the ooze from the heat-up lands next to it rather than on the
model. The incoming filament's target is raised ahead of the tool change, so the
heat-up overlaps both the change itself and the travel to the tower.
Off by default, and only offered for multi-extruder printers using a Type 2 wipe
tower; the generic toolchanger profile enables it.
* fixes: memcpy(...) writing to an object of type OrientParams with no trivial copy-assignment; use copy-assignment or copy-initialization instead [-Wclass-memaccess]
* review result: replaces anonymous namespace with static
* fixes: may be used uninitialized [-Wmaybe-uninitialized]
* fixes: may be used uninitialized [-Wmaybe-uninitialized]
* fixes: may be used uninitialized [-Wmaybe-uninitialized]
* fixes: may be used uninitialized [-Wmaybe-uninitialized]
* reverts {} initializer to = to keep code style consistent
* fixes: %g directive writing between 1 and 13 bytes into a region of size between 6 and 18 [-Wformat-overflow=]
* fixes: %5s directive writing between 5 and 63 bytes into a region of size 58 [-Wformat-overflow=]
* fixes: catching polymorphic type by value [-Wcatch-value=]
* fixes: [-Wcomment]; removes whitespaces
* increases buffer size from 71B to 90B to avoid potential ovfl.
# Description
On Klipper the wipe tower's motion-queue synchronization silently did
nothing. Klipper acts on commands the moment it parses them, and its
`G4` reads only `P` in milliseconds — it ignores `S` — so the `G4 S0`
the tower used to flush the queue before a temperature change never
synchronized anything, and the cooling delay after a filament's cooling
moves passed instantly instead of waiting. The tower now emits `M400`
for the flush and `G4 P<ms>` for the dwell when the flavor is Klipper.
Only `gcode_flavor = klipper` is affected; G-code for every other flavor
is byte-identical, so no shipped profile or existing project file
changes.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The wipe tower's "Delay after unloading" never happened on Klipper. It was
emitted as G4 S<seconds>, and Klipper's G4 reads only the P parameter, in
milliseconds, so the pause was silently skipped. The option now produces a
dwell Klipper actually performs.
Also corrects the planner flush rationale, which cited an extruder position
reset that Klipper resolves at parse time and does not need synchronized, and
adds end-to-end coverage that slices a two-filament print and checks the
emitted wipe tower G-code on both a Klipper and a non-Klipper flavor.
No change to any other firmware flavor's output, and no shipped profile sets a
non-zero delay, so no shipped profile's output moves either.
The wipe tower emitted G4 S0 to make the firmware finish its queued moves
before commands that must not take effect early. Klipper's G4 reads only the
P parameter, so that flush never happened there and a temperature change could
land seconds ahead of the moves it was meant to follow. Klipper now gets M400
instead, through one helper shared by both wipe tower implementations.
No change to any other firmware flavor's output, so no shipped profile or saved
project is affected.
* update snapmaker profiles. largely ported for Snapmaker Orca fork
* update prime volume
* set precise_outer_wall to 1
* Update per-material multi-tool ramming to the filament library
* Add per-filament overrides for toolchange retraction
* Set toolchange retraction per filament for Snapmaker U1
* set default support type to tree
* format snapmaker profiles
The linear approximation used a heuristic segment count clamped to 4..16, so the
lift ran as a coarse polygon. Every vertex is a direction change large enough to
hit the firmware's jerk limit, forcing a decelerate/accelerate at each corner —
the lift micro-stutters instead of running at speed. The segment count now comes
from the chord deviation against the slicing resolution, reusing
Geometry::ArcWelder::arc_discretization_steps, which keeps the turn at each
vertex shallow enough for the firmware to carry speed through the whole move.
Points are emitted through GCodeG1Formatter so they carry the same quantization
as the rest of the G-code, and the move comment now trails the feedrate line to
match _travel_to_z and the G2/G3 branch. No change when arc fitting is enabled.
* fix: make the error dialog caret point at the character it's blaming
Custom G-code parse errors print the offending line with a '^' under the
character that broke, positioned with spaces so it only lines up in a
fixed-width font. Since v2.3.2 these dialogs rendered entirely in the
proportional UI font, so the caret drifted left of its column and landed
on unrelated text.
Render only the code excerpts (the offending source line and its caret) in
the fixed-width face, leaving the surrounding prose in the UI font, and
reserve the horizontal scrollbar's height so a long line does not clip.
Rename the flag to has_code_excerpts to match what it now means.
Fixes#14869
* refactor(GUI): use <code> instead of <tt> for error excerpts
wxHTML maps <tt>, <code>, <kbd> and <samp> to the same fixed-width
handler, so this renders identically. <code> is the non-deprecated
tag and matches what the original code used.
* fix(GUI): align the error caret with real spaces, not
The caret line was padded with so its spaces would survive inline
HTML. wxHTML measures every glyph by its font extent, so where the fixed
font lacks a U+00A0 glyph the fallback renders it about twice as wide, and
the all- caret line outran the source, drifting the ^ to the right.
Wrap the excerpts in a small <excerpt> tag, registered on the dialog's own
parser, that switches on wxHTML literal-whitespace mode so the caret uses
real spaces that match the source column in any font. It sits inside <code>
for the fixed face; <pre> would do both but forces a blank line above it.
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Replace per-printer auto-activation
(is_current_printer_agent_plugin)
with a global experimental AppConfig
toggle, default off: legacy
print-host behavior is unchanged
until the user opts in. The toggle
drives device-tab routing, print
button defaults, connect-button
visibility and sidebar layout, and
dedups machine-select dialog opens.
set_live_printer_agent centralizes
the swap: deselect the machine,
clear stale sidebar state and the
previous agent's Other Devices, then
install the new agent (or null when
its provider vanished). Plugin
load/unload callbacks refresh the
dropdown and re-run agent selection.
load_last_machine no longer falls
back to the first available machine.
A dedicated PrinterAgentChoice field
reads rows straight from the live
agent registry and stores the agent
id string, replacing the fake-coEnum
index mapping. The field moves to
TabPrinter and registers with the
searcher so UnsavedChanges renders
it; the PhysicalPrinterDialog copy
and its update hook are removed
(#125). switch_printer_agent now
resolves ids via
resolve_printer_agent_id.
