Three cues, because one is missed. A teal banner across the top of the viewport names the session
("Editing: Sketch N") and where its exits are; the printer bed is muted for the duration, since a
plate grid and a sketch grid are the same visual language and reading one as the other is how a
sketch gets drawn against the wrong reference; and N looks straight down the plane normal at the
current zoom, with the plane's own y axis as up, because no hand-orbit lands exactly square and a
sketch read at an angle is one whose right angles do not look like right angles.
The banner is an INDICATOR. Finish and Cancel stay on the single ribbon action bar — the tab had
three competing confirm surfaces once and that is not being reopened for a strip of colour. It
sits above the canvas rather than floating inside it: a child window over a wxGLCanvas is a native
window on GTK with no reliable stacking over GL, and being unmissable beats being clever.
The bed checkbox stays the stored preference and is restored on leaving the sketch; ticking it
mid-sketch still shows the bed, because that is a deliberate act and this is only a default.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
Two presses used to discard a live sketch. The key was answered in four places that could not
see each other — the inline value field, a sketch branch, a feature-card branch, and the canvas
— so a press aimed at one fell through to the next, and request_exit() carried a fourth layer
that deliberately let the SECOND consecutive press through to cancel_sketch(). The warning it
showed first did not help: the two presses are never one decision, the first is aimed at a field
or a tool and the second at whatever was underneath it.
The stack is now explicit. CadLevel (DesignInteraction.hpp) is four levels deep, the enum value
IS the LIFO depth, and cad_escape_level() is a constexpr function over a POD of four booleans —
so the ordering that is the entire contract is checked by static_assert at compile time, with no
window, GL context or event loop. DesignPanel::escape() acts on the one level escape_level()
names and on no other, and every Esc in the tab routes through it.
The destructive layer is gone from request_exit() itself rather than guarded at its callers, so
the guarantee cannot be re-opened by adding a route: a session holding geometry is left only
through Finish (keep) or Cancel (discard). Cancel now asks before discarding — it used to refuse
and tell the user to press the button they had just pressed, which meant a drawn sketch could be
kept but never thrown away.
Right-click also stops rewarding navigation with a menu: the offer needs BOTH budgets, released
within 200 ms and moved no more than 3 px, and the raycast uses the press position, so the menu
describes what was pointed at rather than where the camera stopped. Two budgets because drift
alone still popped a menu at the end of a slow, careful orbit.
docs/ux/interaction-model.md carries the state machine, the routing and the transition table.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
* Fix incorrect early exit for CLI mode no-support preventing parameters from being read
* Use PartPlate's m_height to allow CLI to perform proper BuildVolume check
* Add safeguard against extruder_pintable_heights and extruder_areas vector size mismatch
* Preserve printable_height precision in PartPlate/PartPlateList
* Fixed multiple BuildVolume warning issue, and keep check_outside diff minimal
# Description
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
Part 1 of 3 of the CLI-mode bug sweep, split out of #15452 per review
feedback there. This PR contains the crash fixes.
## Fixes
- **`--outputdir`/`--datadir` with a missing parent directory aborted**
via unguarded `create_directory`. Directories are now created
recursively, with a graceful early exit and a specific error message if
creation fails.
- **`--slice` + `--export-3mf` segfaulted on a from-scratch slice**:
`ConfigOptionVector::get_at()` on an empty vector is `.front()` of an
empty vector (UB). Guards added for `filament_color`/`filament_id` at
the CLI call site, and inside `DynamicPrintConfig::get_filament_type`
for `filament_type`/`filament_is_support`/`filament_id`. Only *empty*
vectors are treated as missing — the existing clamp-to-front behavior
for merely out-of-range indices is preserved, so GUI callers are
unaffected.
- **OOB heap write from stale `filament_self_index` on
`--load-filaments`** (fixes#14181): a 3MF carrying more
`filament_self_index` entries than loaded filaments wrote past the end
of `old_variant_counts`. The guard validates both bounds — entries `>
filament_count` *and* non-positive entries (`< 1`), since a single `0`
in an otherwise-valid array indexes `old_variant_counts[-1]`.
- **Wrong printable-area check** for non-rectangular beds: use the
printable area's bounding box instead of a naive vertex calculation
(fixes#15363).
- **`nozzle_height` and `align_center` were not read into the arrange
config** in CLI mode.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
- Repro'd each crash on CLI before the fix; all resolved after.
- `tests/libslic3r` suite passes; full binary builds clean on Linux.
- Added `get_filament_type` unit tests
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The tree-wide length check (freed from its BBL/OFL carve-out last commit)
was flagging 21 pre-existing SeeMeCNC files that no vendor index references
and that therefore never load, turning CI red for files with no bearing on
what ships. The rule now only fires on presets a vendor's filament_list
actually references; every .json under the vendor's filament directory is
still parsed through the duplicate-key hook, so that coverage is unchanged.
Also removed a duplicated BAMBU_MAP_PATH definition: update_bambu_filament_ids.py
now imports the constant from assign_filament_ids.py, which it already imports
several other constants from, instead of recomputing the same path independently.
Every vendor's filament_id declarations, Bambu's own bundle included, are now
minted and checked the same way: the GF* catalog space is reserved but
ownerless, format is validated unconditionally with no snapshot or BBL
exemption, and both --remint and the default assign pass treat a non-OF
declaration as one needing a fresh mint (so a future BambuStudio sync
self-heals instead of needing a manual pass). A new check validates
resources/printers/bambu_filament_ids.json against the tree it describes:
that it parses, carries its header, keys only OF ids, maps each Bambu id once,
and agrees with the tree on every product it shares. The redundant BBL/OFL
carve-out in the profile checker's length check is dropped too, so it runs
the same way for every vendor.
The BBL bundle itself hasn't been touched yet and still declares its old GF
ids, so TestRealTree.test_shipped_snapshot_matches_tree is expected to fail
here (209 declarations flagged) until the next commit re-mints the bundle
onto OF ids.
scripts/update_bambu_filament_ids.py derives resources/printers/bambu_filament_ids.json
from BambuStudio's own shipped BBL bundle (cloned from upstream, or read from a local
checkout via --bambustudio-dir), pairing each Bambu catalog id with the Orca filament_id
we already ship for that product where we ship one, else a freshly generated one. Nothing
reads the map yet; later work uses it to translate ids at the Bambu printer boundary.
* Reject invalid CLI argument values instead of silently accepting them
* Add read_cli accept/reject tests
* Update Option Type for LogFile argument
* Add read_cli vector option tests
* Accept common bool spellings on the CLI, cover --logfile in tests
* Add unit tests for truthy bool parsing
Refresh detach-from-parent checkbox state
Allow the detach checkbox toggle event to propagate to the custom CheckBox control so it refreshes its bitmap after the value changes.
* fix: build_win.bat builds with whatever clang-cl is first on PATH
VsDevCmd appends the Visual Studio LLVM directory to the end of PATH, so
a standalone LLVM already on it shadows the Visual Studio one. -l -x
passed a bare clang-cl.exe for CMake to resolve, so the build ran on
whichever copy came first. For one reporter that was an LLVM 11, which
failed the compiler check before anything was compiled:
-- Check for working C compiler: C:/Program Files/LLVM/bin/clang-cl.exe - broken
lld-link: error: undefined symbol: __guard_eh_cont_table
The compiler is now resolved through vswhere and passed as a full path,
so PATH order no longer matters. CMake derives the linker from the
compiler directory, so lld-link follows. Only a configure passes it to
CMake, so -p and --no-configure resolve nothing and stay buildable on a
machine with no clang installed.
When Visual Studio has no clang toolset the script falls back to the
first clang-cl on PATH and names it. With none installed at all it now
errors with what to add, instead of failing later inside CMake. Every
clang-cl run that configures prints the compiler it resolved.
The suite gains a clang-cl fixture earlier on PATH than the Visual
Studio one, and an empty ProgramFiles(x86) to put vswhere out of reach,
which covers both fallbacks without touching the machine.
* fix: build_win.bat pointed at a solution file that is not there
The Visual Studio 2026 generator writes OrcaSlicer.slnx and the releases
before it OrcaSlicer.sln. The summary hard-coded the second, so the path
it printed after an MSVC build against 2026 was wrong.
The sweep now validates each printer with the filament that printer ships, so a run
over every vendor reports what a single-vendor run does. Validator only - no change
to slicing output or shipped profiles.
Revolve failed on a sketch whose profile was closed. Decoding the reported 3mf: four
entities forming a proper closed loop (joints open by 4.44e-06 mm, well inside
tolerance) plus one stray 1.82 mm Line at (-24.2, 80.3), inside the shaded region,
touching nothing.
The viewport's region_loops discards open chains ON PURPOSE — it exists to find
EXTRUDABLE regions — so the user saw one clean closed region. entities_to_wires kept
the stray as its own one-edge loop, so it returned two wires, and Revolve goes through
entities_to_wire which demands exactly one. Extrude would have failed one step later in
wires_to_face, because a one-edge open wire bounds no face. Same class as the tolerance
split fixed in 8b568b7b: the viewport and the kernel disagreeing about the sketch — this
time about what BELONGS to the profile.
entities_to_wires/entities_to_wire/build_sketch_wire take closed_only. It is not a
blanket rule: a SurfaceExtrude builds a sheet FROM an open profile and a Sweep PATH is
normally open, so all ten call sites are classified individually — true for the face
fallback, Extrude-taper, Revolve, the Sweep PROFILE and Loft profiles; false for
SurfaceExtrude/Revolve/Loft/Fill and the Sweep path.
A component counts as open when some welded node has DEGREE 1. The first attempt used
"the traversal did not return to its starting node", which regressed the bridged C
profile: a closed loop that also carries a second edge across the same two nodes has no
free endpoint, but its Eulerian walk ends elsewhere. Degree-1 is the property that
actually distinguishes a stray segment from a closed profile; the suite caught the
difference.
Behaviour change decided by Tommaso: a stray is IGNORED, not refused. The test that
required refusal dates from when ignoring meant falling through to a default rectangle —
geometry nobody drew. That fallback is gone, so ignoring now builds the circle the user
actually drew. Its assertion is updated with the reason.
The bridge round-trip test extruded an ENTIRELY open chain and "worked" only because
OCCT will make a face from an open wire. It gets a genuinely closed profile: the test is
about serialization, and deserialize_recipe recomputes, so the document has to be one
that legitimately builds.
Failures now say WHERE. sketch_open_ends reports free endpoints under the same weld
tolerance the wire build uses, and open_loop_message is shared by both throws, because
Extrude fails through build_sketch_face and Revolve through build_sketch_wire — enriching
only one would have left the commoner path the less informative one.
Kernel 66115 assertions / 608 cases green.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
Tommaso asked the question that names the real defect: if the sketch was open, why was
the same sketch shaded closed and offered for extrude? Because the two halves used
different tolerances. region_loops shades a region closed at 1e-3 mm; connected_loop
chained at 1e-3; the kernel welded at 1e-4 and OCCT matched vertices at 1e-7. The
2.28e-5 mm gap in the reported sketch did not cause that disagreement, it only made it
visible — and fixing the gap alone would have left the contradiction in place, ready to
reappear anywhere in (1e-4, 1e-3].
kSketchJoinTol now lives in SketchEngine.hpp and is the only place the number exists.
region_loops, loop_report, connected_loop and entities_to_wires all read it through
sketch_join_tol(). The viewport cannot promise a region the kernel refuses to build.
The welding is optional, because a kernel that silently closes loops should let you say
no: "Auto-close sketch loops" in Preferences, default ON, no restart. OFF means only
exactly coincident endpoints join — and since both halves read the same value, the
viewport simply stops shading the region closed, so an open loop is visible rather than
welded behind your back. No separate UI needed for that; it falls out of sharing one
number.
Details that matter. The kernel defaults to auto-close ON independently of the GUI, so
headless and MCP callers behave like the viewport instead of inheriting an unset
preference. With the tolerance at 0 the comparisons become <=, because OFF must mean
exact, not broken. OCCT never receives a zero vertex tolerance — it is clamped to
Precision::Confusion.
The preference is pushed from EVERY entry that starts a sketch session, not just
begin(): a Constrain session enters through begin_constrain / begin_constrain_entities
and uses region_loops and connected_loop, so a single push site would have left those
sessions running on whatever the previous one set. begin_imported_transform is excluded
deliberately — it works on imported regions, not chained entities.
Tests: a loop with one joint open by 9e-4 mm, given out of traversal order, builds a
closed four-edge wire; with auto-close off the same loop yields no wire; and an exactly
closed loop still builds with auto-close off, proving OFF means exact. Kernel 66104
assertions / 606 cases green.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
An extrude built a solid the user never drew: three sides of the handle plus the arc
that bulges outside the outline, with the bowl's second arc and the left edge missing.
Two faults met. entities_to_wires added edges in ENTITY-CREATION order, so a partial
wire rejects the next edge even when the sketch closes perfectly; and one joint of the
reported sketch is open by 2.28e-5 mm, wider than OCCT's 1e-7 vertex tolerance and
wider than this function's own EPS of 1e-6, so that edge was refused on geometry too.
Neither showed up, because BRepLib_MakeWire::Add DROPS a disconnected edge
(BRepLib_DisconnectedWire + NotDone) while every successful Add ends with
BRepLib_WireDone + Done() — overwriting the failure. `if (!wm.IsDone()) return {}`
was therefore asking only whether the LAST edge connected. Six edges in, four out,
IsDone() true.
Endpoints now weld into shared nodes at one tolerance (kSketchWeldTol) used by BOTH
the union-find grouping and the wire build — they disagreed before, which is how a
joint gets united into a loop and then refused by the builder. Each node becomes ONE
TopoDS_Vertex, so the builder matches on identity instead of proximity, with the
vertex tolerance widened because BRepLib_MakeEdge::Init projects a vertex onto the
curve within that tolerance and a welded node sits up to the weld gap off its
neighbour's curve. Members are then walked in traversal order. Finally the result is
counted: IsDone() alone is not evidence, edge_count == members.size() is.
Arc geometry is untouched — the midpoint from (start_angle+end_angle)/2 and the
solver's angle reflow both measured correct and were never part of this.
The regression case carries the reported sketch verbatim, open joint included. It
fails 4 == 6 without the fix, which was measured, not assumed. Kernel 66092
assertions / 604 cases green.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_011FbJKJAJxxkhDTs9XdZzKA
* build: enable /Zc:lambda for MSVC
MSVC keeps its legacy lambda processor under /std:c++17, which rejects
reading a constexpr constant inside a lambda that does not capture it
(C3493). No other compiler requires that capture, and clang reports it as
an unused one, so the two cannot both be satisfied without the flag.
/Zc:lambda selects the conforming lambda parser that clang and GCC
already use. It is implied by /std:c++20 and /permissive-, so it is only
needed while we are on C++17. clang-cl is conforming already and does not
take the flag.
It requires VS2019 16.8, so build_release_vs.bat now says 16.8+.
* build: clear 237 unused lambda capture warnings
236 captures across 81 files, 142 of them `this`. Removing an unused
capture changes no behavior; clang does not report a capture whose type
has a non-trivial destructor, so nothing held only to extend an object's
lifetime is in this set.
Nine of them are the second half of the warning, "is not required to be
captured for this use", where the capture is a const or constexpr value
the body does read. Those depend on the /Zc:lambda change in the previous
commit. One of them, in FillRectilinear.cpp, had been worked around with
an #ifndef __APPLE__ guard around the capture list, which is now gone.
GUI_ObjectTableSettings.cpp captured its reset button only to read it
inside #ifdef __WXOSX_MAC__. That branch now takes the button from the
event it is already handling.
* build: fail configure on MSVC older than 19.28 instead of dropping /Zc:lambda
cl.exe answers an unrecognized /Zc: sub-option with warning D9002 and keeps
going, so on VS2019 before 16.8 the flag is silently ignored and the build
instead dies with C3493 in FillRectilinear.cpp, nowhere near the cause.
* fix: delete three locals that are now unused
Their only remaining use was the lambda capture this branch removed. The
Clang builds set -Wno-unused-variable, so the build never flagged them.
---------
Co-authored-by: Rodrigo Faselli <162915171+RF47@users.noreply.github.com>
