mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-18 14:32:36 +00:00
488c94e957184979d8f5e99029d50dfd68ecf1fb
30145
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Tommaso Bianchi
|
488c94e957 |
SurfaceOffset and ThickenSurface: the arrow stands on a face, the tool still takes the sheet
These were the last tools from the charter audit with no handle at all, and the issue filed against them offered three options, all of which changed the tool. Reading on_add_surface_offset() dissolved the question instead. The premise was that a distance handle needs a frame, a sheet body has no single normal, and therefore the tool must start demanding a face. But the face was never needed for the OPERATION — only for the ARROW. Both tools still offset or thicken the entire sheet named in the combo. The picked face only says where to stand the handle. So the arrow appears whenever a face of that sheet is under selection, and its absence costs nothing: the card alone works exactly as before. Purely additive — no existing flow changes, and there is no new precondition for the user to learn. That is strictly better than any of (a) anchor on the first face and be wrong on a curved sheet, (b) sample a normal at the bbox centre and be arbitrary on a folded one, or (c) require a face pick and change what the tool demands. The arrow is refused when the picked face belongs to a DIFFERENT body than the sheet in the combo. An arrow standing on one body while the tool acts on another would name the wrong thing, which is worse than no arrow. ThickenSurface was not on the audit's list — it is a distinct tool from Thicken, with its own card and its own sheet-body combo, and it has exactly the same shape. Fixing one and not the other would have left the same gap under a different name. Reviewed and compiled (libslic3r_gui, RC=0); not exercised. snaporca-9fel. |
||
|
Tommaso Bianchi
|
416e7f7321 |
Mate conflicts: mark the row that carries them, and name the way out
detect_mate_conflicts() has been filling m_doc.mate_conflicts on every recompute
since the kernel half landed, and nothing read it. The diagnostics existed and
were invisible — a conflicting assembly looked exactly like a working one.
The tree row is where they go, because the tree is where the user is already
looking for which feature to change. Three states, in precedence order:
disabled -> dim. A SUPPRESSED mate is the user's answer to a conflict, so it
must read as suppressed rather than keep shouting about it.
conflict -> warn.
otherwise -> normal.
Selecting a marked row puts the reason on the status line — "Mate3 already
positions Body 2", the cycle, the self-mate — and names the eye as the way to
suppress it. A message that describes a problem with no action is a message that
gets ignored; the action here is already one click away on the row just selected.
Deliberately NOT a modal, and deliberately not treated as a document error. The
document still evaluates with a conflict present: the mate graph merely has more
than one answer for a body, and which one wins is the thing the user needs to
see. Blocking the loop to say so would interrupt without helping.
The dimming of non-involved bodies from the original UX proposal is still not
implemented, on purpose: under transform composition a failure mid-chain
propagates, so "not involved" is not a well-defined set, and dimming the wrong
bodies would hide the context needed to understand the conflict.
Reviewed and compiled (libslic3r_gui, RC=0); not exercised. snaporca-bioq.
|
||
|
Tommaso Bianchi
|
7311cb12cb |
Body-focus picking: fail open, and keep the combo and the viewport as one state
Two defects found by auditing the body-focus x-ray path, which shipped compiled but never exercised. Neither is reachable from the happy path its test plan walks, which is why compiling it proved nothing. 1. A STALE FOCUS KILLED THE VIEWPORT. The focus is a body INDEX held by the panel across recomputes, so it outlives the body it names: delete a body and the stored index can point past the end. body_pickable() then rejected EVERY body, because none of them equals an index that no longer exists — a viewport that silently accepts no clicks at all, with nothing on screen saying why. Out of range now means no restriction. Fail open, never dead. 2. THE COMBO AND THE FOCUS COULD DISAGREE. refresh_cs_body_choice() rebuilds the Body combo and, when the body list shrank, silently reset the selection to "(all)" — while the viewport stayed focused on the old index. Every other body kept its 25% alpha and picking stayed restricted to a body that might be gone. That is the exact mirror of the open_tool ordering bug this feature already fixed once: that one showed "Body N" over an opaque scene, this one shows "(all)" over a dimmed one. They are one state and are now written together. Guarded on CoordSys being the active tool, since it is the only card that owns this focus. In the edit path the function runs BEFORE open_tool with the previous tool still active, so the guard is false and the caller's explicit set_xray_focus still wins. Also confirmed while reading, since the header asserts it: set_solid_pick() does NOT touch m_pick_only_body, so the focus really does survive the mesh feed. That claim now has a check behind it rather than a comment. Reviewed and compiled (libslic3r_gui, RC=0); not exercised. snaporca-bgvk. |
||
|
Tommaso Bianchi
|
23585382ab |
Mate connector: a roll mark that survives a grazing view, and a quieter warning
Two open findings from the first rig judgement of the connector glyph. F4 — the quadrant collapses to a blob at grazing angles, which is exactly when the roll is hardest to read. Adds a radial tick along +X extending past the disc rim. As the disc flattens to a line the sector loses all its area, but a radial spoke keeps its length and its direction along the one axis that still projects. The alternative on the issue was to billboard the quadrant while the disc stayed in-plane. Rejected, and not on taste: at true grazing the view direction lies IN the connector's plane, so every in-plane direction projects onto the same screen line and the roll is geometrically unrecoverable. Billboarding would not recover it — it would face the camera and read as a definite orientation that is not the frame's. Degrading to a direction that can still be trusted beats drawing a confident lie. The tick is additive, so unlike billboarding it cannot make the non-grazing case worse; it still wants judging on the rig at a true grazing view before F4 is called closed. F5 — roll-undefined was a loud red: the strongest colour in the viewport spent on the least important connector, pulling the eye off the mate being made. It marks "this one could not be derived", not an error. Muted amber says look-here without shouting. No tick is drawn when the roll is undefined — a tick there would assert a direction that does not exist, which is the silent guess the hatched quadrant exists to avoid. Reviewed and compiled (libslic3r_gui, RC=0); not exercised. snaporca-wgsc. |
||
|
Tommaso Bianchi
|
e6a14b39c9 |
Rib: the thickness gets its handle, so the whole tool is draggable
Rib's depth already reused the Extrude arrow. Its thickness could not: the arrow points along the plane normal, and thickness is an offset either side of the rib line, IN the plane. Different direction, different handle. Two square handles at mid ± perp·half, plus the slab's actual footprint drawn as a thin closed rectangle — the footprint matters more than the dots, because what a rib thickness means is how wide that slab lands on the body, and until now there was no way to see it before committing. A drag on either handle sets the FULL thickness, twice the perpendicular distance from the line, because the slab is centred on the line and the handle sits at half. Both handles behave identically for the same reason, so they share one colour rather than pretending to be two different actions. A zero-length line has no direction to grow a slab perpendicular to, so the shared rib_frame() helper returns false and render and drag both draw nothing rather than dividing by zero. Non-Line entities clear the gizmo instead of guessing: the kernel is line-only and a gizmo that guesses would be lying about what Confirm will build. Unlike the helix callback this one goes through refresh_preview(), because Rib builds a real solid ghost that has to rebuild. The helix has none and skips it deliberately. Both gizmos coexist and resolve the sketch and entity the same way, so the depth arrow and the thickness handles can never disagree about which line they are on. Reviewed and compiled (libslic3r_gui, RC=0); not exercised. snaporca-plew. |
||
|
Tommaso Bianchi
|
b9d6b59f90 |
A feature that destroys a body must say so, not ship a phantom
Driving the control socket: hexagon prism, six vertical fillets, four chamfers on the already-filleted rim, an M8 hole. Afterwards describe_scene reported bodies=3 and error='' — entirely healthy — while body 2's TopoDS_Shape was null. Only mass_properties on that one body revealed anything was wrong. So a feature destroyed a body, recompute() returned true, and the document went on advertising it. Any downstream consumer — slicing, STEP export, a mass properties report — met a null shape with no warning. That is the silent corruption class, which is the one class this project does not tolerate. recompute() now scans the freshly built bodies for a null shape, names the body and the feature that destroyed it, and returns false. Returning false rather than just setting error is the point: it hands the caller its normal rollback path, so the operation that destroyed the body is undone instead of committed. The message says "an unidentified feature" when source_feature is -1. "feature 0" would be a lie, and a message that exists to tell you where to look has to be trusted. TEST IS A POSITIVE CONTRACT, AND THE REASON MATTERS. The reported order was driven headlessly first, as the better test: it does NOT reproduce. The dress-up step throws "fillet radius too large", which is an already-loud already-caught path, so recompute fails honestly and never nulls a body. No public-API sequence found so far reaches the guard's branch without a GUI, and faking a null into `bodies` after the fact would not exercise it — the guard runs on `built`, before the swap. So the test asserts what can be asserted: a box + fillet recomputes true, error is empty, and no body is null. The guard's own branch is defensive and currently unexercised; that is stated here rather than implied by a green suite. Kernel suite: 2217 assertions in 161 test cases, all passing. No existing test relied on a null body surviving a recompute, so hardening this broke nothing. snaporca-5425 (part a). Part b — why the chamfer chain degenerates on an already-filleted rim — is untouched and stays open. |
||
|
Tommaso Bianchi
|
e8306a6e9a |
Helix: draw the thing, then let the numbers be dragged
grep -i helix over the viewport code returned nothing at all. The tool was four coupled numbers and a Confirm button — you typed radius, pitch, height and taper blind and pressed OK to find out what you had made. So this is not only the charter's L2 failure; the tool had no visible state whatsoever while it was open. Adds a plane-anchored helix gizmo built on the datum-plane gizmo as its template, being the closest existing thing: also plane-anchored, also driven by a card while the sketch tool is inactive, also a render / hit-test / drag triad. It draws the live curve and the axis, and puts a handle on each of the three lengths: radius on the base circle, height at the top of the axis, pitch at the end of the first turn — which is exactly where one pitch of rise lands, so the handle means what it is standing on. Below one full turn the pitch handle moves to the end of the curve rather than floating off a curve that does not exist yet. Taper and handedness stay on the card. One is a shape modifier and the other a flag; L2 governs numbers you can point at. A drag reports the whole (radius, pitch, height) triple rather than one value, because pitch and height are coupled through the turn count and writing one alone would redraw a stale curve. The callback re-feeds the gizmo directly instead of going through refresh_preview(), since Helix takes the produces-no-solid early return and refresh_preview would rewrite the status line on every mouse move. REVIEW CATCH, fixed here: the first cut read taper as a fraction of the radius consumed over the turn count. It is an ANGLE IN DEGREES — helix_spine() builds a Geom_ConicalSurface of half-angle taper and takes the top radius as R+H*tan(taper), growing with the height risen. The wrong reading drew a preview that collapsed to a point for any non-zero taper while the committed feature was perfectly fine. A preview that lies is worse than no preview, which is what this commit replaced. Reviewed and compiled (libslic3r_gui, RC=0); not exercised. snaporca-i3jc. |
||
|
Tommaso Bianchi
|
a5bb41e340 |
Rib: the depth is the same arrow again
Rib's depth is a distance along the sketch plane normal, so it is the Extrude arrow for the fourth time — anchored at the midpoint of the line the rib is built on, because a rib's line IS its profile. This is half of Rib's L2 failure. The thickness is an in-plane offset either side of that line and no existing gizmo draws that; it needs a handle that does not exist yet, filed as snaporca-plew rather than left implied. One of two numbers draggable is strictly better than neither, and saying which half is missing is the point. Reviewed and compiled (libslic3r_gui, RC=0); not exercised. snaporca-i3jc. |
||
|
Tommaso Bianchi
|
4ed14eb0be |
SurfaceExtrude and Thicken: drag the distance instead of only typing it
Both tools produce exactly one number — a distance along a known normal — and neither had a handle for it. That is the same shape as the Extrude depth arrow, which was already written, already draggable and already had an editable label on the geometry. So this adds no gizmo: it points the existing one at two more tools. SurfaceExtrude anchors on its sketch's plane, at the profile centroid. Thicken anchors on the picked face, and reuses the face-as-profile recipe from the Extrude path verbatim — including the two things that path learned the hard way: look the face up on its OWNER body rather than the whole-document compound, and carry that body's display Move transform onto both the origin and the normal, or the arrow draws on the bed instead of on the face. The drag callback routes by active tool. `second` stays Extrude's alone: it is the two-sided pair, and the other two have a single distance each. SurfaceOffset is the third tool in this group and is deliberately NOT here. Its target is an arbitrary sheet body, which has no single normal to anchor an arrow on — that is a design decision, not typing, and it stays on the audit. Reviewed and compiled (libslic3r_gui, RC=0); not exercised. snaporca-i3jc. |
||
|
Tommaso Bianchi
|
b7397b48bd |
Transform: drag the body, the numbers follow
The Placement > Transform verb opened a card of spin controls — dx/dy/dz, an axis combo, an angle — with nothing on the geometry. The 3-axis drag gizmo the charter asks for already existed and was fully implemented (arrows, rotation rings, click-to-type per axis), reachable only from a small icon button in the tree card header. The prominent verb opened the form; the geometry-first control was hidden behind an icon. That was backwards. Transform now arms that same gizmo on the target body. The card stays as L2's typed half: the drag writes dx/dy/dz, the axis and the angle, and the pivot is seeded from the body's centroid so the parametric feature reproduces exactly what was dragged. Decomposition is exact for the interaction that matters — the gizmo's rings are per-world-axis, so a ring drag is an axial rotation. A pose composed from two rings is not axial and the card can only name one axis, so it reports the dominant one rather than refusing to answer. Three things this had to get right: - The gizmo bakes its drag into the display transform so the body follows the cursor, and the feature performs the same motion parametrically. Committing without reverting first would move the body twice. - tool_confirm() and tool_cancel() both tested moving_body() BEFORE the active tool, so with the gizmo armed Confirm would have dropped the gizmo and never created the feature. Both are now guarded on Tool::None. - close_tool() is the single revert point. Esc, Cancel and switching tools all pass through it, so a Transform that was never committed cannot leave the body displaced. Edit mode is untouched: re-seeding the gizmo from a stored feature is a separate problem, so editing an existing Transform still gets the card alone. Reviewed and compiled (libslic3r_gui, RC=0); not exercised. snaporca-qtf4. |
||
|
Tommaso Bianchi
|
3f62d4d58d |
Bodies: colour that survives selection, hide that toggles twice, Delete that acts
Three defects behind one report ("bodies cannot be moved or hidden/shown or
deleted, colour does not work"). They are unrelated to each other; only the
symptom was shared.
1. The Color tool wrote a per-body override that was correct end to end —
stored on CadBody, carried across recompute (CadDocument.cpp:3381), read
back by DesignCanvas::body_color() — and then overpainted every frame.
m_body_selected is a DOCUMENT-WIDE flag raised whenever a non-Sketch
feature row is selected, which is the resting state after any modelling
operation, and while it was true every body rendered gold. An explicit
colour now outranks the selection tint; unpainted bodies still tint, which
is all the tint was ever for.
2. The eye toggle re-selected the body row through m_tree, using item ids that
belong to m_parts. The row came back unselected, so the second press found
tree_body_selection() == -1 and fell through to the feature-level branch
instead of un-hiding. Hide worked exactly once. The sibling call in
refresh_parts() had it right.
3. The tree card's Delete button answered a selected body row with "select the
FEATURE that created this body" — an instruction the user cannot act on,
because the tree does not say which feature that is. on_delete_body()
already resolves CadBody::source_feature and confirms by name; it was
reachable only from the right-click offer. The button now routes to it.
Reviewed and compiled (libslic3r_gui, RC=0); not exercised — needs a session at
the machine to confirm all three in the viewport. snaporca-zjvg.
|
||
|
Tommaso BianchiandClaude Opus 5
|
606026a920 |
Home: axonometric view, fitted
DesignCanvas::set_view() and fit_view() were both written and then never called from anywhere in the tree. The Design viewport has had no way back to a standard view since it existed: no key, no button, nothing but orbiting by hand until the model happens to drift into frame. That is worse than a missing convenience. A camera left pointing along the bed plane renders a scene that looks exactly like a failed renderer — geometry present, nothing visible — and an hour went into blaming the software GL stack before the real cause turned out to be two uncalled functions. Home rather than a letter: every letter A-Z is already a Shift+letter tool shortcut. Home is also the reset-the-view key most users arrive with. The dispatcher needed no change, it keys on the raw wx keycode. set_view() already does select_view + zoom_to_volumes, so this is fit and orient in one call. Doc row added to the View toggles table in docs/design_tab.md. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Tommaso BianchiandClaude Opus 5
|
b305e8b154 |
tests: compile the five CAD test files that were never wired
tests/libslic3r/CMakeLists.txt added only test_caddocument.cpp under SLIC3R_CAD. The other five shipped in the tree and were never compiled, so 49 TEST_CASE blocks looked like coverage and were not: sketch constraints, sketch editing, sketch import, inference, and the libslvs constraint set. They also still targeted Catch2 v2 — mainline is on v3, where the umbrella header is catch2/catch_all.hpp and Approx lives in the Catch namespace rather than at global scope. Both fixed; nothing else in the files changed. Found by building the tree rather than reading it. Suite goes from 374 to 423 test cases, 54,424 to 54,620 assertions, all passing. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Tommaso BianchiandClaude Opus 5
|
d584d66003 |
Mate conflicts: name what silently wins, don't call it over-constraint
Two enabled mates driving the same body is not an error today — the later one just wins, and the earlier mate looks ignored with nothing said. A cycle in the mate graph is worse: composition still produces a result, but an arbitrary, order-dependent one. recompute() now fills a mate_conflicts vector of (feature index, reason) before the geometry pass, so it survives a throw further down. It catches a second mate on the same target body, a mate positioning a body against itself, and a cycle, via an iterative three-colour DFS over the body graph. Broken mates are skipped silently — apply_mate() already errors on those. Deliberately non-fatal: recompute() still returns true and error stays empty. Deliberately not "over-constraint" — that word promises DOF analysis from a solver this kernel does not have. Port of snaporca ec4ffeb979. Kernel half of snaporca-bioq. Suite: 2213 assertions / 160 cases green on this fork too. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Tommaso BianchiandClaude Opus 5
|
3eec65f2bd |
CoordSys: pick a body first, x-ray the rest
In an assembly the face you want for a mate connector is nearly always behind another body, and a click only ever returns the frontmost hit. Hiding the occluder from the Parts list works but means leaving the tool mid-pick. The CoordSys card now carries a Body chooser. Pick a body and every other one drops to 0.25 alpha AND stops catching clicks, so the wanted face is both visible and reachable in one gesture. "(all)" restores normal picking. Deliberately NOT hit cycling: repeated-click cycling was removed from solid picking as a charter L5/§10 violation (DesignSketchTool.cpp, "NO CYCLE"), and re-introducing it here would make "click a face" a multi-click gesture again. Mechanics: DesignSketchTool::set_pick_only_body() gates body_pickable(), which every pick path already consults; DesignCanvas::set_xray_focus() drives both it and the per-body alpha in reload(). The chooser stays a pick FILTER only -- coordsys_body still comes from the actual pick, so nothing in the kernel moves. Body focus follows the CoordSys card: open_tool() reads it back from the combo rather than clearing outright, because editing a CoordSys feature loads the card (and its body) before open_tool runs. snaporca-bgvk. NOT COMPILED: deps/build lacks OpenVDB so the GUI tree will not configure here; reviewed by diff only. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Tommaso BianchiandClaude Opus 5
|
8ff7ba440d |
CadDocument: reindex mate connectors on feature delete and reorder
mate_cs_a/mate_cs_b are feature indices. remove_feature() remapped sketch_ref through the deletion but not the mate connectors, and move_feature() swapped sketch_ref but not the mate connectors. Deleting or reordering any feature ahead of a connector slid both references onto whatever features landed on those slots. Nothing reported it. recompute() only rejects out-of-range and non-CoordSys targets, and a shifted index normally lands on the assembly's other CoordSys — an assembly carries at least two by construction. So the mate resolved against the wrong frames and moved the wrong body, silently. Extracted a remap lambda in remove_feature() and a swap_ref lambda in move_feature(), applied to sketch_ref and both mate connectors. Two tests, both confirmed red before the fix. [mate] tags green here: 395 assertions / 29 cases — the first end-to-end kernel compile of this fork. Ported from snaporca; CadDocument.cpp is byte-identical across forks again. Refs: snaporca-kqih Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> |
||
|
Tommaso Bianchi
|
0a2faedc32 |
Design: draw the mate connector, so its verse and polarity are visible
A mate connector was visible only to a program. resolve_datum_coordsys had exactly ONE consumer in the whole tree -- McpControl.cpp, the agent socket -- so the frame every mate is built on could not be seen at all, and the two questions a connector has to answer on sight had no answer in the viewport: which way does Z point (the VERSE), and which of the pair is anchored versus about to move (the POLARITY). The glyph is Onshape's proven core plus the part nobody ships. Disc for the XY plane, one gold quadrant for the roll -- the only in-glyph answer to "where is X", which matters because Fastened and Slider lock the clocking -- and a Z arrow drawn on +Z ONLY, never double-headed. Polarity is carried by the head: a filled cone travels, an open collar receives. Onshape, Fusion, Inventor and FreeCAD all draw both ends of a mate identically, which is why "which part moves?" is a standing complaint; nothing here invents new semantics, it just stops hiding them. Polarity is read from the committed Mate features, not only from the open card. A connector some mate drives must read as driven whenever it is on screen, or the glyph tells the truth only while a dialog happens to be open. The card, when open, still wins -- that is the live intent. Judged on the rig rather than in a mock, which changed three decisions: - Three RGB axis arms lose to one Z arrow. Rendered side by side (SNAPORCA_GLYPH=A selects the Onshape-style trio), the three heads are as large as the 22 px disc, they bury the quadrant, and at an oblique angle they pile into a smudge -- and the trio is indistinguishable from the move gizmo and the bed triad, which are already RGB arrow trios in this viewport. - Depth off floats, depth on tears. With GL_DEPTH_TEST off, connectors on faces pointing AWAY from the camera drew their discs over the solid, so the part looked covered in frames that were on its back. Turning depth on fixed that and immediately z-fought: the disc is exactly coplanar with its face and came out a broken dotted arc. Depth ON plus a 0.7*upp lift along Z buys both, and scaling the lift by upp keeps it sub-pixel instead of opening a visible gap on zoom-in. - Foreshortening degenerates an arrow into a dot when the axis points at the camera. It now draws a ring instead of silently vanishing, which is what a naive projection does. Everything is sized in screen pixels via upp = 1/zoom, like every other gizmo here: a connector is a symbol, not a part, so it must not shrink with the model. Research and the empirical findings are written up in DESIGN_MATE_CONNECTORS.md section 8b; rig images in artifacts/shots/g-0*.png, vendor reference glyphs in artifacts/glyphs/. Not fixed here, and recorded rather than papered over: the quadrant collapses to a blob at a grazing angle, which is exactly when the roll is hardest to read (F4); roll-undefined in red makes the least important connector the loudest thing on screen (F5); and a true grazing view, a curved face, and overlap with the move gizmo are still untested. Also surfaced while testing and unrelated to drawing: add_mate accepted a mate between two connectors on the SAME body and duly transformed the body relative to itself -- a concrete instance of the missing validation already filed as G6. Fork parity unchanged: DesignCanvas.cpp 16, DesignPanel.cpp 30, the other four files 0. |
||
|
Tommaso Bianchi
|
24f4076bb5 |
Design: the Hole and Thread cards say which face they are holding
snaporca-200 asked which of the two models of "the card's face input" is right, because clicking empty canvas now clears the selection (snaporca-od0) and made them visibly disagree: Thicken / Shell / Draft read the LIVE selection and their label reverts to "(pick a solid face)", while Hole / Thread LATCH the face they were opened or picked on and keep it. The complaint was that Hole then drills a face you can no longer see selected. Taken to the rig, that turns out to be the wrong half of the story. With Hole open and its face picked, a click on empty canvas leaves the Ø6.0 ghost and its dimension gizmo drawn on that exact face — the card was never operating in secret, it was showing its target the strongest way a CAD tool can. Meanwhile Draft, whose behaviour was held up as the honest one, threw the pick away and had to be told the face again. So neither model replaces the other. They are different in kind: Thicken / Shell / Draft are operations whose operand IS the selected face, and Hole / Thread are placement tools with their own plane state that a pick merely seeds. The latch is also the kinder of the two now that empty clicks are a deliberate gesture — a stray one costs Thicken a pick and costs Hole nothing. What was genuinely missing is that nothing in those two cards NAMED the latched face, so after such a click the only words on screen were the viewport's "Nothing selected" over a ghost about to drill. Both cards now carry an "On face" row, the way the other three already do: Hole Face 5 | (none — uses Hole plane) Thread Face 1 | Edge 2 | (none — uses Thread plane) Thread names an edge when the cylinder came from a circular rim rather than a cylindrical face, which the code already distinguished internally and never said out loud. Verified on both rigs, every state driven through the GUI: face pick on open and on live pick, survival across a click on empty canvas, and the fallback after choosing XY/XZ/YZ from the plane dropdown. Thread's edge branch was exercised on a revolved tube's rim, its face branch on the same tube's outer wall. Filed while here, surfaced by the new row rather than caused by it — snaporca-uif9: re-editing a stored Hole/Thread from the feature tree restores f.plane into the dropdown but never clears m_hole_on_face, so the re-edit silently reuses the PREVIOUS card's latched face. Now visible by name instead of invisible. Fork parity unchanged: DesignPanel.cpp 30, DesignPanel.hpp 0. |
||
|
Tommaso Bianchi
|
93395b7888 |
Design: escalate on the entity that was picked, and let the chip follow the window
Both found by Kimi reviewing the previous two commits, both then reproduced here before being touched. snaporca-97z. The re-pick escalation required m_solid_sel, m_sel_body, m_sel_face AND m_sel_edge to all match the previous pick. That looked stricter and was wrong: the edge branch sets only m_sel_edge and m_solid_sel, leaving m_sel_face as whichever face the ray happened to enter through — and a shared edge is entered through a different face depending on which side you view it from. So picking an edge and picking that same edge again from the other side compared equal edges, unequal faces, and refused the escalation the status line had just promised. Now the comparison is made at the level that was picked and nothing else. The edge id is already the stable global one from edge_index_of, so it identifies the edge without help from the face. Reproduced on the rig without needing to orbit, since two clicks 8px apart across an edge enter through different faces: pick -> sel=3 body=0 face=5 edge=3 ray -> body=0 face=0 re-pick -> escalated to whole body 0 pick -> sel=1 body=0 face=-1 edge=-1 Same edge, face 5 then face 0, escalation fires. The old condition could not. The frame-move case. The chip is anchored at an absolute screen position, and until now nothing told it the window had moved — only a resize, a status change or a tab switch re-placed it. Dragging the window by its title bar left it stranded where it was, verified on the rig by moving the frame and watching it stay put. wxEVT_MOVE on the top-level frame, alongside the ICONIZE and ACTIVATE binds from the previous commit. Two related cases are filed rather than bound, because the list of window-geometry events to chase is exactly what snaporca-lcq argues should stop: a layout change that translates the canvas without resizing it, and wxEVT_DPI_CHANGED. Not fixed, deliberately, and recorded on snaporca-97z: clicking the same FACE but landing within the vertex or edge tolerance resolves to a different kind and so does not escalate — that is the "smallest thing under the cursor" rule working as documented; and a vertex re-pick after moving the body compares stale world coordinates. Verified on both rigs. The cross-face edge case was exercised on orca_cad; DesignSketchTool.cpp is byte-identical across the forks, so snaporca inherits it, and its face-level escalation and empty-click clear were re-checked there directly. Fork parity unchanged: DesignSketchTool.cpp 0, DesignCanvas.cpp 16. |
||
|
Tommaso Bianchi
|
6d1a4078ca |
Design: the status chip goes away with the window, not just with the page
Found by minimising the app on the rig with a face selected: the whole screen goes black and the chip is still drawn on the bare desktop. A wxPopupWindow is override-redirect — the window manager does not own it — so it neither iconises with its frame nor stacks behind other applications. IsShownOnScreen does not catch this either: an iconised frame still counts as shown, which is why the guard added for the tab case sails straight past it. So the frame has to say so itself: ICONIZE and ACTIVATE, both routed through the same show_status_hud the page change already uses. Restoring is safe — a popup cannot take focus, so our own Show() cannot re-trigger either event — and restoring while some other page is up still leaves the chip down, because show_status_hud(true) goes through place_status_hud's IsShownOnScreen guard. Verified on both rigs: chip up, minimise -> screen black and empty, restore -> chip back with its text and the face still selected. Restore while on Prepare -> chip stays down. This is the fourth defect from the same root, so snaporca-lcq now asks the question these binds keep deferring: whether the line should be canvas content, like the view cube and the round view buttons, rather than a window that has to be told about every way a window can stop being visible. Fork parity unchanged: DesignCanvas.cpp 16. |
||
|
Tommaso Bianchi
|
9c3ce9b45e |
Design: clicking empty space lets go of the selection, and the status line follows its tab
Two things a click on nothing should already have done. snaporca-od0. A click that hit no geometry left the solid selection standing. A rubber band swept over empty space has always cleared it (pick_bodies_in_rectangle), and the two gestures cannot disagree about the same outcome. The visible cost was in the escalation that landed last commit: "click the face, click away, click the face again" arrived as the SECOND click on the same face and took the whole body, when the click away was the user letting go of it. Now the miss clears and says so. This gives up something real, deliberately: Thicken / Shell / Draft hold their input face in the panel's selection, so a stray click on empty canvas with one of those cards open hands that face back. Their handlers already write the "(pick a solid face)" placeholder and rebuild the ghost when the selection empties, so the card SAYS it lost the pick rather than confirming against a face the viewport has stopped highlighting. An orbit drag never reaches this branch — it exits at the 8px budget — so panning the view still does not deselect. snaporca-dlj. The status line is a wxPopupWindow, which is a TOP-LEVEL window: hiding the Design page does not hide it. Select a face, switch to Prepare, and the chip was still there reading "selected (whole body) — right-click for what applies to it" on a tab with no such selection and no such menu. Same cause, second symptom: a status update arriving while the page is hidden anchored against a client size that is not the size the page will have, and parked the chip on the tab bar. So: an IsShownOnScreen guard in place_status_hud, show_status_hud(bool) to take it down and bring it back with its text intact, driven from the page-changed handler. Verified on both rigs, not by reasoning about it: face 5 selected -> click bed -> "Nothing selected", tint gone -> click the same face -> face 5 again, NOT the body -> click it again with no click away -> whole body, so snaporca-gem is intact. Prepare -> chip gone; back to Design -> chip returns. KEYTRACE across the round trip shows shift+S then R still reaching the canvas (ui_mode 0 -> 1, Rectangle armed), which is the focus theft this popup replaced a wxFrame to avoid. Fork parity unchanged: DesignPanel.cpp 30, DesignCanvas.cpp 16, headers and DesignSketchTool.cpp 0. MainFrame.cpp is outside that set and was edited per fork. |
||
|
Tommaso Bianchi
|
c32aa3f8ba |
Design: clicking the same face twice takes the body, and the status line moves onto the viewport
A click could point at a face, an edge or a vertex, but never at the body those
belong to: offer_selection_kind() can only return BodySolid when all three are
clear, which a viewport click never produces. The rubber band was the only door,
and the status line said "face 5 selected" while the user believed they had taken
the body. A second click on the SAME sub-element now escalates to it (snaporca-gem).
Not the pick cycle that was removed in bc2b741ce9 -- that one was silent and three
deep, so no click had a predictable meaning. Here the status line names the next
click before you make it, and a further click just takes the face under the cursor
again, which needs no teaching. Double-click is untouched: wx sends Down/Up/DClick/Up
and only the first Up carries a pending press, so a fast double-click still zooms to
fit and picks once.
The status line itself moved to the base of the viewport. In the side panel it was
clipped at ~73 characters with no warning and no wrap -- set_status()'s Wrap() never
took effect (snaporca-8cc) -- which silently length-limited every hint in the tab; the
first version of this change lost a clause to it. m_status is kept, hidden, as the
owner of the text and its colour, and the line is drawn in a bottom-left twin of the
readout HUD where there is a whole window's width.
Three defects found driving it on the rig, none of which the build could see:
* the HUD as a wxFrame took the WM's keyboard focus every time it was raised, and
the canvas then received NO key events -- every sketch shortcut silently dead.
Caught with SNAPORCA_KEYTRACE: shift+S logged a line, the following R logged
nothing. It is a wxPopupWindow now, which cannot be focused. SetFocus() on the
canvas does not fix it: focus was on another toplevel.
* zero vertical padding fits the popup tighter than the font's line box and clips
the glyphs; 6 (what the readout uses) reads as a two-line box. 3 is right.
* "has a caller chosen a colour?" compared the label's foreground against its
PARENT's, which differ by default, so every line counted as chosen and the
neutral text came out the panel's dark grey -- invisible on a dark chip. Compare
against the colour the label was created with, captured before any caller writes.
Verified on both rigs against fresh binaries: sketch -> extrude -> click face ->
click again -> whole body tinted, offer opens with the body rows live and Create /
Add material correctly greyed. Keyboard drives the whole sequence.
Filed and NOT fixed here: snaporca-od0 -- a bare-plate click does not deselect the
solid, so "click away, click back" escalates. Pre-existing; clearing there would also
drop the face the Thicken/Shell/Draft cards hold, which needs its own pass.
Refs: snaporca-gem, snaporca-8cc, snaporca-od0
|
||
|
Tommaso Bianchi
|
7e5994b8cb |
Design: right-click a body row opens the offer, and taking a body always means the same thing
The third door onto the offer, after the viewport right-click and the Menu key. A body ROW is
an unambiguous body, so the offer reports BodySolid and the body verbs act on the row you can
see highlighted — the confirmation a face pick cannot give, since pointing at a face lights the
face and never the body the verb will change. The status line has been promising exactly this
("Body N selected — right-click for what applies to it") since before any handler existed on
that list; the product was advertising a gesture that did nothing.
WHAT THE RIG CAUGHT THAT THE BUILD DID NOT. The first version hung the state normalisation off
wxEVT_TREE_SEL_CHANGED. But SelectItem() on a row that is ALREADY selected fires no selection
event, so a stale vertex from an earlier viewport pick survived — and offer_selection_kind()
tests vertex FIRST, so right-clicking the body row served the VERTEX offer while the row sat
highlighted: Fillet/chamfer/draft greyed, Mirror standing where Repeat belongs, "vertex
selected" still in the status line and the cyan marker still on screen. The happy path (fresh
row, nothing else picked) looked perfect, which is why only the deliberate stale-state sequence
exposed it. Reading the code would not have shown it — SelectItem looks like it selects.
So the normalisation is no longer a selection handler. apply_body_row() is called
UNCONDITIONALLY by both doors, because taking a body from the list means the same state change
however it was asked for. It also clears m_sel_solid_vertex, which the original handler never
did — latent while nothing opened the offer from that list, and immediately fatal once
something did.
Verified on both rigs with the failing sequence itself: pick a vertex, then right-click the
already-selected row. Fillet/chamfer/draft enabled, Repeat back in place, status reads "Body 1
selected", vertex marker gone.
Does NOT touch the feature tree. That needs new selection kinds (offer_selection_kind has no
notion of "a feature is selected") plus verbs the atlas does not contain — Suppress, Rename,
Reorder, Roll back — and is filed separately.
|
||
|
Tommaso Bianchi
|
6c59898ac0 |
Design: pointing at part of a body is pointing at the body
Tommaso: "i deleted a body using rubber band selection, but this is not intuitive as all the ux revolves around clicking". Correct on both counts, and a correction to what I said last round: the rubber band IS implemented and shipping (pick_bodies_in_rectangle, m_rubber, the drag branch in on_mouse). What is unbound is whole-body picking via CLICK; I read the comment about the click path and wrongly generalised it to the gesture as a whole. The handlers were never the problem either. Move, Mirror, Cut, Mass and Colour all resolve their target through selected_body_default() / m_sel_solid_body, and that is already set when you click a FACE — level >= 1 records the body. They would have worked from a click all along. The only thing keeping them out was the atlas gate: accepts listed body_solid and no face kind, so offer_selection_kind() returning FacePlanar filtered the rows away. This is therefore an atlas-only change, no handler edits. Cut, Split, Mirror, Transform, Mass and Colour now accept face/edge/vertex as well, matching what Delete Body already did. Edges and vertices are included deliberately, not just faces: a click resolves to a vertex, an edge or a face depending on where inside the pixel it lands, so accepting only faces would make Move vanish whenever you clicked near a corner — a flicker that reads as a bug and gets reported as "sometimes it works". NOT widened: Extrude on a face means push/pull THAT face, and Thicken consumes the face you point at. Both have genuine face-specific meaning, so widening them would change what they do rather than where they can be reached from. The rubber band keeps its job — it is still the only way to take a body without also naming one of its faces. It just stops being the only door. Verified on both rigs from a plain face click: Transform > Move opens with Body = Extrude2 (resolved from the face pick), Modify > Edit / Delete Face / Colour / Delete Body, and Reference > Mass. |
||
|
Tommaso Bianchi
|
b2654ebd8a |
Design: a body knows what made it, so "Delete Body" can exist
Reported by Tommaso: select a body, and there is no Delete in the offer. Two independent faults stacked behind that. FIRST, clicking a body never selects the body. Whole-body picking is deliberately unbound (DesignSketchTool.cpp) pending the rubber band, so a viewport click only ever yields Face/Edge/Vertex. The offer therefore saw face_planar, and "delete" accepted body_solid but no face kind, so the row was filtered out entirely — while the status line read "Body 1 face 0 selected", which actively teaches the wrong model. SECOND, even selecting the body from the Bodies list, Delete refused in red: "Select the FEATURE that created this body". CadBody had no link back to its maker, so the offer was advertising a verb it could not perform — worse than the action:null rows fixed earlier this session, because this one is ENABLED and its refusal reads like user error. CadBody::source_feature fixes the second. It is stamped in ONE place, the recompute loop, and the rule is just "still unset?". That is sufficient because of an invariant worth stating: no feature ever replaces a whole CadBody. Every in-place op writes only .shape (boolean, cut, mirror-fuse, transform, dress-up — all 8 sites checked), so a body keeps the stamp it was born with; a consumed body is erased outright, taking its stamp with it; and the only bodies still at -1 are the ones the current feature just pushed. A feature type added later needs no change here as long as it keeps to that invariant. "Delete Body" fixes the first, sitting beside "Delete Face" in Modify and reachable by pointing at any face/edge/vertex. The two names cannot be confused, and "delete" gave up the body kinds so both can never appear for one selection. Deleting a body removes the feature that made it, which is a real edit to the recipe, so it asks first and NAMES the feature — a body vanishing from the viewport is not evidence of which feature went, and this is the one action here that cannot be eyeballed. Multi-body delete is NOT offered. bodies_2 was in the first draft of the verb; the handler deletes exactly one body, so a two-body selection would have silently deleted whichever was m_sel_solid_body. Caught before it reached a binary, at the cost of one rebuild. Verified on BOTH rigs, full round trip: click a face -> Modify > Delete Body -> "Delete Extrude2?" -> body gone, Sketch1 correctly left behind, panel falls back to the idle hint -> Undo -> Extrude2 and Body 1 restored. |
||
|
Tommaso Bianchi
|
34eb4224a1 |
Design: fix a wrong issue ref in the Thicken comment
The previous commit cites snaporca-y7q, which does not exist — I wrote the ID from memory instead of reading it back from the bug I had just filed. The real one is snaporca-kgx, "Offer: Thicken (and peers) open with the picked face discarded". The comment is corrected here; the commit message above it cannot be, so this note is the pointer. |
||
|
Tommaso Bianchi
|
9d47280a19 |
Design: a card opened from a face must use, and show, that face
snaporca-y7q. Thicken's opener cleared m_sel_solid_face outright. That was right when the
only door was a toolbar button — a button carries no selection, so pressing Thicken had to
clear and ask you to point at something. The offer inverted it: the verb is now invoked ON
a face, and the same line threw away the only thing the user had said. The card opened
reading "(pick a solid face)" over an immediate "thicken: face not found" — you pointed at
the face and were told none could be found.
Keep the pick when the body combo landed on the body it came from (the index is per-body,
and selected_body_default() returns exactly that body when it is valid).
Two neighbours had the mirror-image flaw, both invisible for the same reason — the value
was right and the ghost updated, so only the label lied:
- Thicken had NO live label update at all. Nothing outside the opener ever wrote
m_thicken_face_label, so while the card was open you could pick face after face and it
still read "(pick a solid face)".
- Shell and Draft wrote theirs ONLY from the pick handler, which runs while a card is
already open — so opened from a selection they showed the previous pick, or the
placeholder over a face they were about to use.
So the label is now written once in open_tool(), which every door goes through. The
edit-feature path already restores m_sel_solid_face from the stored feature BEFORE calling
open_tool, so it agrees rather than fights.
Verified on the snaporca rig: face 4 of an extruded plate, offer > Add material > Thicken
now opens "Face: Face 4" with "Preview — 24 triangles" and confirms to a real Body 2. Draft
opened from a face shows "Face 3" and previews the taper. This fork is code-identical here
bar the two permitted DropDown divergences; it still owes a build of its own (snaporca-5pl).
Project keeps its clear: there "(all edges)" is a legitimate default mode rather than a
failure, so changing it would alter behaviour with no reported problem behind it.
|
||
|
Tommaso Bianchi
|
cfc2555c3a |
Design: a verb's address is data, so the toolbar widget can stop existing
snaporca-7ih's remaining half. Both flyout factories registered their verbs INSIDE the widget-building loop, so the ~40 retired tool buttons had to be constructed and then Hide()n: skipping construction would have deleted 42 offer verbs (26 fly:<family>#<row> + 16 Shift+keys) while their rows still rendered and did nothing when picked. Register first, build second. The addresses are pure data; the widget is one door onto them, not their owner. A family absent from kBarKeep now returns before any wxWindow is made. The keep-list stays a one-line data decision, not a structural one. And close the class of bug for good: the constructor now verifies, once, that every verb the atlas marks wired resolves to a real registration, logging each break and asserting in debug. Rows that render and do nothing have shipped three times (edit_feature and sk_move with action:null, then this) and are invisible from either side alone. Verified on the snaporca rig by walking the offer, not by reading the code — all four at-risk address kinds run with no widget behind them: fly:design_rect#2 drew an OBLIQUE rectangle (the third variant, not the family's first), key:S+E opened Extrude with its 10 mm gizmo, fly:material#4 opened Thicken. Hover hints, icons and nesting intact. This fork is code-identical here bar the two permitted DropDown divergences; it still owes a build of its own (snaporca-5pl). Two hints were wrong and are fixed: Cut said "Split the body with a plane", colliding with the Split verb one row away and pointing at a card for a value the canvas already offers as a draggable arrow; Split never said its plane comes from a picked face. Also, because it blocked the verification and will block the next one: gui-session.sh killed by full path while its own app_pid() matched by basename, so a differently-pathed instance survived, held the single-instance lock, and got reported as a healthy session — a Jul-30 binary nearly passed as this build. It now kills by basename and prints which binary is actually on screen. Traps 6 and 7 documented. |
||
|
Tommaso BianchiandClaude Opus 5
|
96816f725c |
Design: every offer verb has a hint, shown on hover — and the status line wraps
Mirror of snaporca 2b3e890165 (DesignPanel.cpp applied as a patch; parity 30 / 16, shared files byte-identical). All 86 verbs now carry a hint: 55 extracted from the C++ tool definitions so the offer and the armed-tool hint cannot drift, 31 written by hand. One wxEVT_MENU_HIGHLIGHT binding shows the hovered verb's hint in the status line. The generator asserts that no wired verb lacks one. Also: all 200 status writes go through set_status(), which wraps instead of clipping at the panel edge; and the empty-document hint is called from on_tab_shown() as well, since after_tree_edit() never runs on a freshly opened tab. Verified on the rig. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso BianchiandClaude Opus 5
|
3037e55f44 |
Design: hints name the gesture that works, and an empty document says how to start
Mirror of snaporca 033347d062 (parity 30 / 16). Retiring the toolbar made ten hints untrue: each named an action whose door had moved to the offer, or a button no longer on the bar. They now name the gesture. An empty document blanked the status line entirely and now says how to start. Known and not fixed here: m_status does not wrap, so long hints clip; and the 86 offer verbs still have no per-verb hint of their own. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso BianchiandClaude Opus 5
|
811719b7aa |
Design: Construction goes back on the sketch bar — a mode must show its state
Mirror of snaporca b3d4cf85af (parity 30 / 16). Hiding it with the drawing tools was wrong: Construction is a persistent MODE, not a tool — the Bed checkbox, not the Line button. Q and the offer's Construction row kept toggling a checkbox nobody could see, so you could not tell whether the next line would be construction geometry. Scoping unchanged and already correct: m_tb_sketch is shown only in UiMode::Sketch, so it appears exactly while a sketch is open or being edited. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso BianchiandClaude Opus 5
|
86f1f96c50 |
Design: the toolbar is chrome — every tool is reached from the offer
Mirror of snaporca 809aa9df87 (DesignPanel.cpp applied as a patch; parity 30 / 16, shared files byte-identical). fadd() and sadd() now gate what reaches the bar: file operations, Bed, Undo/Redo, Delete selected, Commit to Plate, Confirm/Cancel, plus Place on Face and Section view — the last two because they are chrome_only in the atlas and have no offer row to fall back on. The tool buttons are still built and then hidden, deliberately: their fly: addresses and Shift+key bindings are registered inside the widget-building loops, so not building them would silently drop 42 verbs from the offer while they still rendered. snaporca-7ih covers hoisting the registrations so the construction can go too. Four separators whose groups are now empty were dropped; they rendered as stray rules. Verified on the rig in both modes. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso BianchiandClaude Opus 5
|
a535b0cb76 |
Design: the offer draws each verb's icon — set the bitmap BEFORE Append, not after
Mirror of snaporca bcab67f8ce (DesignPanel.cpp applied as a patch; parity 30 / 16, shared files byte-identical). tool_atlas.json now names an icon for 80 of 86 verbs, derived from the toolbar's own definitions rather than invented, and every one of the 54 distinct names was checked to exist in resources/images first. The first attempt drew nothing despite a green build: wxGTK builds the GtkMenuItem inside Append() and reads GetBitmap() there, so setting the bitmap on the returned item is a silent no-op. append_offer_item() constructs, sets, then appends — the same order Orca's own append_menu_item() uses. Verified on the rig. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso BianchiandClaude Opus 5
|
bc4fb3b680 |
Design: Text and SVG draw INTO the open sketch instead of beside it
Mirror of snaporca 1fb7786d9a (DesignPanel.cpp and DesignCanvas.cpp applied as patches; parity 30 / 16, shared files byte-identical). With a sketch open, Text/SVG outlines become ordinary Line entities via push_closed_lines() instead of a separate Sketch feature carrying rigid imported_regions — so the letters can be constrained, trimmed and extruded like anything drawn by hand. The buttons and offer actions arm Select first when in Sketch mode, since begin_sketch() does not run until a tool is armed. add_imported_regions() calls reset_autoedit(): without it the glyph contours entered the draw-then-edit queue and opened a Length field on the first segment, which freezes the canvas. Caught on the rig, not by reading. No sketch open: unchanged — a new Sketch feature, still dropped on a picked face. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso BianchiandClaude Opus 5
|
447c71a0d2 |
Design: Text and SVG join Create — they were excluded on a premise that is not true
Mirror of snaporca 6724ea27c5 (DesignPanel.cpp applied as a patch; parity 30, shared files byte-identical). chrome_only's rule is "acts on the DOCUMENT, not on a selection". Text and SVG both call add_imported_sketch(), which drops the art on a picked solid face via SketchPlane::from_face() — a selection-consuming profile creator, like Sketch. Now sk_text / sk_svg in the sketch half's Create row, where their toolbar buttons already sit. Verified on the rig: Create ends Point, Text, SVG. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso BianchiandClaude Opus 5
|
d5c5d5675e |
Design: a body tool acts on the body you picked, not on the first one
Mirror of snaporca e5e223a794 (DesignPanel.cpp applied as a patch; parity 30, hpp byte-identical). Every body combo opened on index 0, so picking a body and pressing Mirror acted on a different solid while the card showed that other body as the target. Nine sites now read the viewport selection; Boolean takes the picked body as target and a different one as tool, since defaulting both to the same body is a no-op. Verified functionally on the rig: picked the 20x20 body, mirrored, and the new body measures 20x20 — not the 80x50 one it would have used before. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso BianchiandClaude Opus 5
|
273cf067e8 |
Design: record that Shell stays in Remove — decided, not overlooked
Mirror of snaporca e2ef3018cd. Data only, and only the `why` prose in two slots — the generated DesignOffer.hpp is byte-identical, so there is nothing to rebuild. Ratified 2026-08-01: the offer deliberately splits the toolbar's dressup family. Shell hollows a solid so it sits in Remove; Delete Face edits an existing solid so it sits in Modify. Recorded in both slots' `why` so either half explains the split. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso BianchiandClaude Opus 5
|
f6e6cd83c1 |
Design: the fillet row is named for the tools it actually holds
Mirror of snaporca 352cf1c259 (data only — tool_atlas.json + the regenerated DesignOffer.hpp; both byte-identical across the forks). "Fillet / chamfer / draft" rather than naming shell too: Shell is in Remove and Delete Face in Modify. Only the toolbar's dressup dropdown groups all five. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso BianchiandClaude Opus 5
|
0c2b643b0b |
Design: the card says which tool it is, and "Dress-up" stops being a word we use
Mirror of snaporca 3677937964 (DesignPanel.cpp applied as a patch; parity 30, shared files byte-identical). The card header read "Fillet 1" over a chamfer because the offer's Chamfer address opened the tool before setting the type, and open_tool() titles the card from that combo. Choose first, then open. "Dress-up" removed from the offer row (-> "Fillet / chamfer"), the card field (-> "Type", it was a label reading Dress-up whose value said Chamfer) and the toolbar tooltip. Verified on the rig: header "Chamfer 1", field "Type: Chamfer", row "Fillet / chamfer". Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso BianchiandClaude Opus 5
|
3c998b8a62 |
Design: a tool's options come from the tool, not from a card on the left
Mirror of snaporca 6d5510734b (DesignPanel.cpp applied as a patch; parity re-checked at 30 lines, shared files byte-identical). Polygon's Sides/Circumscribed card is deleted — the choice is made in Create > Polygon, which names the counts and the two fits, because the side count cannot be recovered after drawing. Dress-up, Combine and Pattern were single verbs hiding several behind a combo and now name each one in the offer. Fixes fillet and chamfer both carrying key:S+F, which made the offer's Chamfer open a Fillet. Built green and verified on the rig: the Dress-up card opened from Chamfer reads Chamfer. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso BianchiandClaude Opus 5
|
d1d61ce997 |
Design: every sketch tool has an address in the offer, not just its family
Mirror of snaporca 0c83f59f13 (DesignPanel.cpp applied as a patch, not copied, so this fork's 30 permitted divergent lines survive; parity re-checked at 30/16 with the shared files byte-identical). The sketch dropdown never registered "fly:<family>#<row>" addresses the way feat_dropdown does for model verbs, so the offer could name a family but only ever arm its first tool — Rectangle always gave a corner rectangle. Adds the registration, 14 atlas verbs (including the entire array family, which was absent, and rotate/scale), an action for the sk_move row that previously did nothing when picked, and a second submenu level so variants nest under their family instead of flattening 19 create tools. Built green and verified on the rig: Oblique rectangle arms oblique, not corner. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso BianchiandClaude Opus 5
|
fd1bc092d8 |
Design: slot Radius caption, keyboard offer, plane combo removal, mass props, docs
Mirror of snaporca ac85277bac..0e7cb3ec78 (six changes, applied as a patch to DesignPanel.cpp rather than copied, so this fork's 30 permitted divergent lines survive — parity re-checked afterwards: the five shared files are byte-identical, DesignCanvas.cpp and DesignPanel.cpp differ by exactly 16 and 30 lines). - The straight slot's inline field says Radius, which is what it sets. It stores the half-width and passed the typed number through unchanged, so 30 produced a 60 mm slot. - The offer opens from the keyboard (Menu, Shift+F10), anchored on the viewport rather than wherever the pointer happens to be. The card hint names the new route. - The sketch card's Plane combo is gone; the plane comes from the viewport. Also stops build_candidate collapsing a face plane to a base plane while editing. - Mass properties and the dead Edit row are wired into the offer; DesignOffer.hpp is regenerated from tool_atlas.json, verified by re-running the generator and diffing. - docs/rig_build_traps.md + scripts/rig-build.sh, which derives its fork identity from project() so it cannot be pointed at the other fork's image or volume. - docs/design_tab.md refreshed (44 commits stale) + a PR description, with this fork's own merge-base and diff shape rather than snaporca's. Built green in the deps container with the new script and verified on the rig: Menu and Shift+F10 both open the offer at the viewport centre with the pointer parked off-canvas, and the sketch card shows no Plane row. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso BianchiandClaude Opus 5
|
6e9910303b |
Design: a sketch takes its floating chrome with it when it ends
Confirming a sketch while an inline value field was open left the field behind. The editor is a top-level frame, so it survived the session that owned it, and inline_busy stayed set with it — on_mouse_impl then returned true at its first branch for every later click and the viewport was simply dead. No refusal, no message: exactly the "click the geometry, nothing happens" the pick bugs above it were mistaken for. finish() and cancel() now call close_session_chrome(): dismiss the open field (keep-as-drawn, the same contract the polyline terminators already use), drop the queue of fields behind it, and clear the corner readout — which had the same defect for the same reason, sitting on 336.8° over a committed sketch because nothing redraws the HUD once the tool stops. Verified on the rig on the exact reported sequence: line on XZ, Return to accept the length, Confirm with the Angle field still open. The field goes, the sketch commits, and the next click reaches the pick (pick trace shows down/up consumed) and selects Sketch1. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso BianchiandClaude Opus 5
|
1addba6ea0 |
Design: editing a quote UPDATES its dimension instead of appending a rival to it
Type a new length into a sketch quote and the number changed while the geometry
sat still, with the solver dropping to "Conflicting constraints" — a broken
constraint state the user never asked for, arrived at by doing the one thing the
status line invited.
An experiment separated the two candidate causes. Same gesture, one variable:
a line committed WITH a driving length refused the edit and conflicted; a line
committed with none (Esc keeps it as drawn) accepted it and visibly shrank. So
the value was never the problem and the solver was not wrong — it was being
handed two contradicting constraints and correctly declining to choose.
The quote-edit path appended unconditionally:
a.con = int(m_constraints.size());
m_constraints.push_back(constraint_for(a));
Accepting the length at draw time creates Distance(P0,P1) = 64.9. Clicking the
quote later creates a SECOND Distance on the same two points asking for 30. Over
-constrained by construction. A line with no dimension yet only ever gets one
constraint, which is exactly why this looked intermittent rather than total.
upsert_constraint() finds an existing constraint with the same type and operands,
overwrites its value and returns its index; it appends only when there is none.
Operand order is ignored — a Distance from A to B is the same constraint as B to
A, and so is an Angle. Returning the index matters as much as the update: it
keeps the annotation's `con` pointing at the constraint that is actually live, so
the NEXT edit is an update too rather than reverting to appending after one good
round. upsert_dimension() applies the same rule to the visible quote, which had
been stacking labels reading different values on the same pixel, and keeps the
existing label position so a placed quote does not teleport.
set_dimension_value already did the right thing through a.con. The machinery
existed; these two call sites never consulted it.
Verified on :11 on the exact failing case — draw a line, Return to lock the
length, Confirm, double-click to re-open, click the line, type 30 into the quote:
the line shrinks, the quote reads 30.0 mm, one label not two, and the solver
stays at "3 degrees of freedom" with no conflict.
NOT included: record_dimension_constraint() has the same unconditional push_back
in all six of its branches. It belongs to the legacy Constrain mode with
different selection semantics and I could not exercise it, so it is flagged
rather than changed blind.
Refs snaporca-e1p.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM
|
||
|
Tommaso BianchiandClaude Opus 5
|
a1fdb9f217 |
Design: double-click a sketch stroke to edit it — the gesture belongs on the geometry
Selecting a committed sketch line lit the right tree row and then told the user to go and press Edit in the panel. That is the side-panel dependency this tab exists to remove, and it made "selectable" true while "editable from the geometry" stayed false. on_edit_feature already does the whole job — re-open the entities in the sketch UI with handles and live quotes — and was only ever reachable from a tree row. A double-click on a committed stroke now calls it for that feature. Double-click on empty space still fits the view, so nothing is taken away. The stroke hit test is now one hit_display_sketch() shared by the click and the double-click. Two copies of "what is under the pointer" drift, and a double-click acting on a different entity than the click before it is a miserable thing to chase. It also reports the entity index, which the tracer prints, so a pick that lands on the wrong stroke can be seen rather than inferred. Verified on :11 end to end: draw an open line, commit, double-click it. The tracer prints "double-click -> edit sketch feature 0 (entity 0)", the panel reads "Editing sketch — drag a handle or click a quote to edit", and a click inside the session selects the line with endpoint handles, live quotes and "1 selected — Delete removes them". NOT delivered by this commit, found while verifying it: typing a new value into a length quote is accepted and displayed but the geometry does not move and the solver drops to "Conflicting constraints". Filed separately — it lives in the constraint layer, not in selection, and nothing here touches it. Refs snaporca-e1p. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso BianchiandClaude Opus 5
|
c5404507c7 |
Design: an open sketch line can be clicked — region membership is not a licence to be pointed at
Reported from the rig: a committed sketch holding a single open line rendered on
the plate and could not be selected, so it could not be edited or deleted from
the viewport at all.
The viewport pick for committed sketches iterated region_loops(). That function
exists to find EXTRUDABLE regions and, as its own walk comment says, an open
chain "stalls" and is discarded. So for a sketch of open entities it returns an
empty list, the pick loop has nothing to iterate, and every click falls through
to bare plate. Not a tolerance problem and not a focus problem: there was no
candidate geometry to test against.
Whether a stroke bounds a closed region has nothing to do with whether the user
can point at it. The stroke test now covers every non-construction entity, and a
separate entity->region map preserves what a hit REPORTS, so a click inside a
closed loop still names that loop exactly as before. Region membership decides
the report, not whether the hit can happen.
The rest of the path was already written and simply unreachable: the panel's
handler has a region < 0 branch that selects the feature, highlights it in the
tree and says "Sketch selected — Extrude it, or Edit / Delete from the tree".
This makes existing behaviour reachable rather than adding new behaviour.
Verified on :11 with the pick tracer (SNAPORCA_PICK_TRACE=1), which is what
distinguished the two failure modes: before, the click reached the handler and
fell through to handle_solid_click ("no solid data"); after, it is consumed by
the display-sketch test and never reaches it, and the panel reads "Sketch
selected" with Sketch1 lit in the tree.
Construction geometry stays unpickable, matching region_loops' own filter. It is
the same class of bug — a construction line cannot be selected to delete it —
but including it risks construction stealing picks from real geometry, so it is
left as a separate decision.
Refs snaporca-e1p.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM
|
||
|
Tommaso BianchiandClaude Opus 5
|
9f2b2bc511 |
Design: sketch means a tool — the offer works inside a sketch, and the app stops
contradicting itself about the plane Reported from the rig: pick a plane, press Sketch, and you are told to pick a plane. The app prescribed a sequence and then refused to acknowledge that you had followed it. Right-click did nothing, so there was no way to reach a drawing tool except the toolbar this tab exists to retire. act_sketch was two lines: set the mode, then print "Click a face or a reference plane in the viewport, then a sketch tool" — unconditionally, without ever asking whether a plane was already chosen. The plane was never lost; m_ref_plane held it and begin_sketch captures it when the first tool is armed. The sentence was simply false. It now asks. sketch_plane_target() is a companion to sketch_plane_from_selection that distinguishes "the user chose XZ" from "nothing chosen, falling back to XY" — a distinction m_ref_plane cannot express on its own, being always a valid index, so m_plane_picked carries it. With a target the readout names it and the offer opens on the Create row; without one the old prompt stands, because then it is true. The card above the status line was a local wxStaticText that nothing could update, so it went on asking for a plane two inches from a line saying the plane was chosen. It is a member now and the two are written together. Right-click inside a sketch was excluded wholesale so that it could end a polyline chain, abandon an anchor, exit a tool. That made every sketch row in the atlas unreachable. The honest test is not which mode we are in but whether the tool actually USED this right-click, and only the tool knows: on_mouse now wraps on_mouse_impl and records that once, for every terminator, instead of threading a flag through the twenty-odd sites that consume a RightDown. The canvas read-and-clears it on the matching release. Underneath all of it was one confusion — MODE versus SESSION — at four sites. begin_sketch does not run until the first tool is armed, so is_sketching() is false for exactly the interval between "press Sketch" and "pick a tool", which is precisely when the drawing tools must be on offer. The keyboard learned this once already (snaporca-0ud, whose comment states the rule) and I reintroduced it in offer_selection_kind and again in show_offer_menu, where the offer built from the FEATURE map and rendered nine rows that all refused the sketch selection. Both now call sketch_map_applies(), so they cannot drift apart again. The keyboard keeps its own split: its "sketching" gates undo and delete-last-entity, which genuinely need a live session. Verified on :11 against a fresh build. Pick XZ, press Sketch: card reads "Drawing on XZ", status reads "Sketching on XZ — pick a tool", offer opens with Create and Reference live and the six rows needing geometry greyed. Right-click while idle opens the offer. Right-click as a terminator does NOT — the chain ends, the line lands on XZ, its length field arms at 49.36 mm. That last one is the regression the blanket exclusion was buying and the reason this shape of fix was chosen over a mode test. Refs snaporca-6vs. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso BianchiandClaude Opus 5
|
bb403b82cf |
Design: left-drag sweeps a rubber band, and it takes the whole body
The pick cycle died two commits ago and left no viewport route to a whole body at all: one click resolves vertex, edge or face, double-click is already zoom-to-fit, and the only way to take a body was the Bodies list — a geometry-first violation for as long as it stood. The rubber band is that route. Left-drag is the gesture, as asked. That button was orbit, so this canvas now maps the mouse the way every CAD the user already knows does: left selects, middle orbits, right pans. The change is a single flag on GLCanvas3D set only by DesignCanvas, so Prepare and Preview keep the mouse their users learned. Sketch mode inherits the same mapping, which is the consistent reading — Design is one modality, not two. Past an 8 px budget a press becomes a sweep, anchored at the ORIGINAL press point rather than at the frame where the threshold was crossed, so the first few pixels are not lost. Below the budget it is still a click and the existing vertex/edge/face pick runs untouched. Sampling is the display mesh's triangle vertices plus centroids — the same points the ray pick tests, already in world coordinates — and the body with the most samples inside wins, because the selection callback downstream carries one body. Crossing semantics: touching selects. Enclosed-only for left-to-right and crossing for right-to-left is the fuller CAD convention and is deferred, not forgotten; with one selectable body it would have bought nothing. Two defects fixed on the way, both found by exercising this: Right-drag pans, and every pan ended by popping the offer over wherever the camera stopped — the context menu arriving as the reward for moving the view. The offer is now the release of a STATIONARY right-click, at the same 8 px budget the pick uses. The selection handler wrote m_status twice. Only the later write ever reached the screen, so the earlier block had been dead since it was written, and its labels drifted out of step with the live ones unnoticed — including a vertex fix I made this morning in the branch that never renders. Deleted, with a note saying why, rather than left as two writers for the next person to pick the wrong one. Verified on :11 against a fresh build: click takes face 5; left-drag across the body reports "selected (whole body)" with the whole solid tinted and the camera unmoved; left-drag over empty space clears; stationary right-click opens the offer; right-drag pans with no menu; middle-drag orbits. Precedence re-checked after the deletion — face at 25 px from the corner, vertex from 10 px in. Refs snaporca-9xw. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com> Claude-Session: https://claude.ai/code/session_01LyRwbuq6fjn3VV9U9UvhBM |
||
|
Tommaso Bianchi
|
33f97d259b |
Design: vertex picking — a click near a corner takes the corner
Completes the precedence Tommaso asked for: vertex, then edge, then face, all from ONE click, all decided in screen pixels. Verified on :11 by sweeping into the right corner of a plate — x=1250 and 1290 report "face 5 selected", x=1308, 1318 and 1323 report "vertex selected" — and the cyan marker lands exactly on the corner in the render. The vertex tolerance (11 px) is deliberately LARGER than the edge one (8 px). A corner lies ON its edges, so equal radii would make vertices unreachable: every click near one would resolve to the edge underneath. Bigger-wins-first is what makes the smallest entity actually pickable. Vertices come from the sampled edge polylines' endpoints rather than a separate topology walk — every corner of a face is the end of one of its edges, so the data was already in hand. The highlight is a camera-facing square scaled by 1/zoom, the same trick the edge ribbon uses, so it reads as a constant dot at any zoom. This is why vertex picking did not ship with the previous commit: the Edge render path billboards a ribbon and degenerates on a two-point input, and a selection you cannot see is not a selection (L5). Better to add the primitive than to fake the feature. DesignPanel now distinguishes level 4: a picked corner sets neither face nor edge, because a corner is not its face, and the offer classifies it as OfferSel::Vertex — where Plane, Axis and Coord Sys already accept it. snaporca-9xw (rubber band still open — see the issue). |
||
|
Tommaso Bianchi
|
b003d20e37 |
Design: kill the pick cycle — one click selects what is under the cursor
Tommaso, correctly: fix selection before building on it. I had taken the
whole→face→edge click cycle as terrain and hung the tool offer off it, when §10
of the charter already listed that cycle as an L5 violation. An offer can only
ever be as truthful as the selection beneath it, so this is the foundation and
it should have come first.
NOW: one click selects the SMALLEST thing under the pointer — the edge if the
cursor is within tolerance of one, otherwise the face. No repeat clicks, no
state, no memory of what was picked before. Verified by sweeping a column of
single clicks down a plate on :11: y=800..915 all report "face 5 selected", and
y=925/935 — within a few pixels of the front edge — report "edge 3 selected".
One gesture, one deterministic result, which is what L5 asks for.
TOLERANCE IS IN SCREEN PIXELS. The old edge step compared a ray-to-segment
distance in millimetres, so the same gesture meant different things at
different zoom levels. The pointer is a screen object; its tolerance has to be
one too. 8 px, measured against the edge polyline projected through the camera.
WHAT IS NOT HERE, AND WHY IT IS NOT FAKED. Whole-body selection has no viewport
gesture in this commit. Double-click is ALREADY zoom-to-fit, bound earlier in
the same on_mouse, and this pick runs on LeftUp where LeftDClick() can never be
true — so a double-click branch here would have been dead code that reads like
a working feature. I wrote one, found it unreachable, and deleted it rather
than leave it. The body gesture is the rubber band, which is its own piece of
work; until it lands bodies are selected from the Bodies list, and the hole is
named in a comment at the site instead of being left for someone to trip over.
Six status strings that promised the cycle ("click again for a face", "click
again for an edge", "click again to reset") are gone — they described a
behaviour that no longer exists, and a hint that lies is worse than none.
Both forks build. Parity: DesignSketchTool.cpp byte-identical, DesignPanel.cpp
30 divergent lines — the invariant exactly.
snaporca-6vs.
|