* build: clear 2 warnings - a precedence bug and an arm64-only pragma
Both were found by promoting every warning to an error across the CI matrix.
Neither is reported by clang-cl on Windows x64, which is the configuration the
#15374 inventory measures.
LineSplit.hpp reserved with path.size() + closed ? 1 : 0. Addition binds
tighter than ?:, so that parses as (path.size() + closed) ? 1 : 0, and the
function returns early when path is empty, so the condition is always true and
the reserve is always 1. The vector then grows by reallocation instead of
reserving once. Output is unaffected, since reserve only sets capacity.
Reported by Clang on Linux, macOS and Flatpak; GCC does not diagnose it.
Int128.hpp declared #pragma intrinsic(_mul128) under _WIN64, which is defined
on Windows arm64 as well, where that x64 intrinsic does not exist. The call
site at line 190 is already guarded on _M_X64 and carries a comment saying
ARM64 has no _mul128, so the pragma now uses the same guard. x64 is unchanged
because _M_X64 is defined there.
* build: clear 1 warning - CLI error label prints 1 instead of a name
construct_assemble_list is a function, so streaming it converts the function
pointer to bool. When that catch block fires the CLI prints "1: <message>".
This line was already fixed in #5963 and came back in the wholesale revert of
that PR two weeks later, which was reverting an auto-orientation regression
somewhere in its 184 files. The string is restored exactly as it was merged
then.
Both are in our own code and neither shows up in a clang-cl or clang census,
so the Windows and CI matrices have never reported them.
FillRectilinear.cpp draws two trapezoid diagrams whose lines end in a
backslash, which continues a // comment onto the next line. GCC calls that a
multi-line comment. The diagrams are now block comments, where the rule does
not apply, and the drawings are unchanged.
CutObjectBase has a user-provided operator= and a virtual destructor, either
of which deprecates its implicitly generated copy constructor. bbs_3mf.cpp
copies the type through CutObjectInfo. The copy constructor is now declared
and defaulted, leaving the class with no implicit copy member. Move
operations were already suppressed by the user-provided operator=, so nothing
changes there.
Every edit makes the precedence the compiler already applies explicit. None
of them regroups an expression, so behavior is unchanged at all eight sites.
Strip parentheses and whitespace from the diff and the token stream matches.
GCodeProcessor.cpp:1472 tests == where the symmetric clause below tests !=,
which reads like a typo and is not one. A comment now explains why.
OrcaSlicer.cpp:4760 was the only judgment call. Its leading !is_seq_print is
bare while both operands are parenthesized, so the written form matches what
the compiler does. Kept rather than guessed at.
ImGui::Text and ImGui::TextColored take a printf format, so these six sites
passed data where a literal belonged. A % in that data reads a vararg that
was never supplied.
Three sites in GLCanvas3D's paint toolbar passed filament text, which comes
from the filament preset config and is user-editable. Two more passed
translated strings, where a % in any of the 23 catalogs does the same.
GLGizmoSimplify passed its progress label.
That label had been built with an escaped %% because it was being used as a
format string. Passing it as an argument instead needs a single %, so it
still renders as "42%".
ToUTF8() returns a buffer class, which converts to const char* for a named
parameter but not through varargs, so those two sites need .data().
GLGizmoSimplify.cpp:335 is unchanged, because _u8L("%d triangles") is passed
with a real argument and has to stay a format string.
A plain CLI slice ran none of the placement sites, so a stored or
default tower position that no longer fits the tower the plate needs
went straight to the generation-time error. The slice loop now applies
the same clamp the GUI applies on reload to every plate it is about to
slice, skipping only plates that print no tower: by-object plates with
more than one instance, and plates whose footprint estimate is empty
(which covers single-filament plates without smooth timelapse, wrapping
detection or a raft). The plate's filaments come from the same
config-driven derivation the estimate uses everywhere else.
The two arrange sites read the brim width from the right option when
padding the default position; an auto brim uses its 8 mm cap there,
since the object heights are unknown before the estimate runs.
The preview brim, the placement margin and the pre-generation validation
warning each decided on their own whether the tower has a Type2 cone
base, reading the wall type and cone angle three different ways. The
preview's read cast the preset's enum to ConfigOptionEnum<T>, which a
preset-shaped config never holds, so the cone base was never previewed.
estimate_wipe_tower_first_layer_outline now answers that question once,
beside the footprint estimate, from the config and the resolved planner;
all three sites take the outline from it. The libslic3r case reads the
outline off a preset-shaped config, where the old cast came back empty.
The validator forces a two-filament print with the prime tower on and
slices it at the config default position (x 15, y 220), which lies off
any bed shallower than the tower. It calls validate() but slices
regardless, so the off-plate tower was exported silently; with the
generation-time footprint check it is rejected instead, and 522 of the
1013 printer presets failed the slice check.
The validator now positions the tower the way the GUI and CLI do before
slicing: beside the centred cube, clear of the edge exclusion strips some
beds carry, then pulled inside the printable outline by the tower's own
estimated footprint.
The clamps and validation work from estimates. Once the tower is
generated, _make_wipe_tower re-tests the exact first-layer footprint,
brim and cone base included, against the printable area and the
exclusion zone, so an off-plate tower fails with a clear error instead
of exporting unprintable G-code. The rectangle-wall mesh footprint
learns the Type2 cone base so that check and the post-generation
validation see the real outline.
Pre-generation, validation hard-checks the body plus an explicit brim
and warns on the estimated auto brim and cone base with the existing
"may collide" strings, so the user hears about a marginal position on
the first slice rather than only at generation time.
Two fff_print fixtures that print a tower at the default position move
it onto the 200 mm test bed, as the multifilament fixtures already do:
the shipped default y of 220 is off that bed, and the backstop now says
so instead of exporting the tower.
Smooth timelapse no longer charges a prime volume it does not purge. A
tower printed with no tool change is exactly the idle depth: the
stability minimum for Type2, the wrapping detection depth for Type1.
Charging a full prime_volume on top made the previewed and arranged
tower deeper than the one that is printed.
The Type2 half of "a tool change reserves a tower whatever the purge
volumes resolve to" arrives with the base commit; here it only has to
survive the planner split, since Type1 already reserves per filament.
The wipe tower filament only joins the tool ordering when there is a
tower to join, which is the has_wipe_tower() half of the guard
Print::extruders applies.
The shared estimate reserved every tower with one volume-per-purge rule
and the stability floor. Both planners do more: WipeTower (Type1) wipes
each filament's own prime volume in whole lines, one block per
adhesiveness category sized by its worst layer, rams the leaving
filament at every nozzle change, and squares a rib tower from the
planned depth; WipeTower2 (Type2) spaces its lines by
wipe_tower_extra_spacing, not the Type1-only infill gap, and its extra
flow cancels out of the depth. Both extend the ribs rather than the body
below the stability minimum, size every layer including a thinner first
one, and lay the brim in whole loops, WipeTower reporting half a spacing
of line width on top.
All of that now lives in estimate_wipe_tower_footprint, fed the planner
(resolve_wipe_tower_type mirrors Print::wipe_tower_type and the CLI's
Bambu Lab detection) and the filament ids rather than a count. Print
passes its own tool set; the PartPlate adapter derives the plate's ids
from the passed config and treats an explicit count as a floor, so the
CLI's count-only callers size per filament too. The placement clamp also
reserves a Type2 cone's base bulge, which the body box does not cover.
The planner-mirroring helpers sit beside the planners in WipeTower and
WipeTower2 so the two stay in sync; the libslic3r cases pin them to
footprints measured from generated G-code.
Validation grows the estimated body by the brim before the tower is
generated, so a tower whose brim leaves the bed is rejected up front
instead of at export. The scene reload re-clamps the stored position,
since set_default_wipe_tower_pos_for_plate does not rerun when painting
changes the filament count. The rectangle-wall footprint polygon gets its
two missing brim corners (it was a skewed quad), so the post-generation
check covers the whole brim.
A raft is not a reason to reserve a tower. Print::apply runs
normalize_fdm_2, which clears enable_prime_tower for a plate that purges
one filament unless smooth timelapse or wrapping detection is on, so a
single-filament plate with a raft prints no tower at all and the estimate
was reserving bed area for one. Drop the input; need_wipe_tower is now
exactly the two exceptions normalize_fdm_2 honours, named there so the
next reason added has to be checked against it.
The GUI preview and the validation containment check each re-derived
"is a tower printed here" from the filament count instead of reading the
estimate, so both missed the towers printed with no tool change to purge
for. They now take the answer from the footprint, which is the drift this
shared estimate exists to remove. A tower that is not printed estimates to
zero, so its hull is degenerate and every check on it passes trivially -
the containment check needs no gate of its own.
WipeTowerData::width was written only by the pre-generation estimate and
left at zero for the whole post-generation life of the Print, while its
neighbour depth held the real value. Set it from the generator in both
branches.
The plate's height scan transformed every model part's full mesh per
instance on each scene reload, discarding all but the z extent. The
cached convex hull has the same z extent.
A plate loaded from a sliced .gcode.3mf holds no objects and its filaments
live in slice_filaments_info; the config-taking get_extruders overload
returned an empty list for it, which sized the tower for a placeholder two
filaments. It now answers the way the wx overload does, without reaching
the plater.
Also drop estimate_wipe_tower_size, which has no callers.
import_presets reduced each zip entry to a basename by stripping only
'/', so on Windows an entry named with '\' separators kept its
directory components and was extracted wherever they pointed. Strip
both separators, and reject any entry whose name still escapes the
extraction folder.
The preset name from the JSON and the bundle id from
bundle_structure.json were joined onto the preset directory unchecked
as well, which let either of them write outside it on every platform.
Both are now validated before anything is written.
The check is the is_path_within_root helper the 3MF importer already
had, moved to Utils so both importers share it. It treats '/' and '\'
as separators on every platform, so a bundle that would escape on one
OS is rejected on all of them.
* Make tree support deterministic without giving up its parallelism
* Break equal-distance ties in the tree support MST by coordinates
* test: cover the determinism this PR fixes
The MST unit tests here cover the tie-break, but the drop_nodes rework
has no test.
Adds two cases to the tree support suite. The thread-scheduling one
slices five configs twice each and compares the support point sequence,
which is what the node ordering moves. The MST tie one pins the branch
diameter and line width that carry Prim's equal-distance ties into the
toolpaths.
slice_with_tree_support takes an optional config list so the second case
can add the tree parameters it needs, and the double-slice comparison is
shared rather than written twice.
Both fail on main without this PR. The first passes from 60d1ceb580, the
second from e148865dd6.
---------
Co-authored-by: raistlin7447 <kris.austin@gmail.com>
* Fix fuzzy skin failing the slice: the minimum junction width was unscaled
* Unit Tests For Fuzzy Fix
* Cover ridged multifractal noise in the fuzzy skin width floor test
Its output is not bounded to [-1, 1], so it scales past the configured
thickness and drives the junction width negative. The floor has to hold
for any noise value, not just an in-range one.
Fix nondeterministic slicing: order per-layer intersection lines canonically
Facet processing in slice_make_lines() is parallel, so the per-layer line
order depended on thread scheduling. make_loops() consumes that order for
island order and loop start vertices, so the same model could slice to
different G-code run to run.
Sort each layer's lines by a topology-based key. edge_type and flags are
appended to the key purely to break ties: two lines can share every id and
endpoint (a Horizontal facet can emit such a pair) and std::sort is not
stable, so without them that pair's order would stay thread-dependent.
# Description
This PR redesigns `filament_id` across OrcaSlicer's profile library, so
that one filament
product now carries one consistent id everywhere it ships, instead of a
hand-written value that
unrelated materials routinely shared. Minting scripts and CI checks come
with it so future
profiles comply by construction: a new filament takes its id from the
tool, and the checks
reject a hand-written, duplicated or drifted one before it can merge.
Unique, non-duplicated ids are a precondition for AMS-style spool
syncing to be dependable —
the id is what a printer matches a physical spool against, and while two
products share one, the
match is a coin toss. This PR lays that groundwork. A follow-up PR will
publish an OrcaSlicer
materials reference on the wiki, giving every system profile one place
to point at.
`filament_id` names one filament product, and it is what a device
matches a physical spool
against: Bambu AMS, Creality CFS, the Qidi box, Klipper and Snapmaker
all resolve a tray to a
preset by id alone, first hit wins. Those ids were written by hand, and
on `main` 99 of them
stand for 674 different products — `GFL99` alone covers 132, from
Anycubic PLA to Bambu PLA
Matte. Every consequence is silent: a spool resolves to whichever preset
happens to load first,
tray names and support-material flags are read off the wrong material,
and the second preset
holding a duplicated id disappears from the tray-edit dialog entirely.
The id is now a hash of `(filament_vendor, filament_type, filament
name)`, so one spool product
carries one id in every bundle that ships it, two vendors shipping the
same product converge on it
without coordinating, and a collision cannot be authored by hand. Every
ambiguity across 48
vendors is fixed rather than excused — no grandfather list and no
per-vendor carve-out, Bambu's
bundle included — and the resulting landscape is frozen in
`scripts/filament_id_snapshot.json`,
so a change to any filament's identity lands as a reviewable diff to one
file. CI now runs the
duplicate-subtype validation tree-wide instead of over Bambu only.
Letting the id follow the product meant correcting the identities
themselves. Generics that
shipped under a vendor prefix now have one name and one id everywhere
(`Blocks Generic PETG` is
`Generic PETG @Blocks`), presets whose `filament_vendor` or
`filament_type` contradicted the
spool are fixed, and duplicate pairs are collapsed onto the
better-configured survivor. Renames
carry `renamed_from`, so existing projects and user presets keep
resolving.
Bambu's printers, its AMS and its cloud know only Bambu's own catalog
ids, so those ids leave
the profiles entirely. The Bambu bundle mints like every other vendor,
and the printer agent
swaps in the catalog value only where an id crosses to or from a Bambu
printer — outbound MQTT
and FTP, the AMS mapping sent with a job, the ids written into a 3mf the
printer will read —
mapping back on the way in, so status messages, SD-card prints and
projects saved by an older
Orca or by BambuStudio all still resolve. The correspondence is
generated from BambuStudio's
own shipped bundle by `scripts/update_bambu_filament_ids.py`; an id with
no row is forwarded
untouched, a missing or malformed map degrades to no translation rather
than taking the app
down, and an agent whose printers already speak Orca's ids translates
nothing.
Two device-side bugs this work surfaced are fixed here as well. The Orca
Filament Library was
missing from the AMS material and calibration dialogs, which treated a
filament with no
`compatible_printers` as compatible with nothing while the rest of the
app treats it as
compatible with everything; and Creality CFS sync on a K2-family stock
0.4 nozzle picked the
wrong preset, an imprecise matcher that duplicate ids had been masking.
`docs/HLSD/filament_id.md` is the authoring rule for all of this.
`scripts/orca_id_tool.py`
mints both `filament_id` and `setting_id`, replacing
`assign_vendor_setting_ids.py`, and the
local `check_profile` scripts gained per-vendor scoping so one vendor
can be checked without a
tree-wide run. `scripts/tests/` covers the tooling; `tests/slic3rutils/`
covers the boundary
translation and the CFS matcher.
Ids change for most products and nothing forwards the old value, so a
tray or a calibration
record still holding one falls back to matching by filament type until
the filament is selected
once. Beyond the profile fixes above no print settings change, except
that a few presets stop
claiming printers a dedicated variant already covers.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
`scripts/check_profile.sh`, the local twin of the "Check profiles" CI
job, with
`scripts/check_profile.bat` as its Windows entry point, passes on this
branch: the extra JSON
check reports no errors and no warnings, system validation and the now
tree-wide
filament-subtype check load all 66 vendors cleanly, all 1013 printer
presets slice, and
custom-preset validation passes against every fixture archive from
v1.9.0 to v2.4.2.
The id tooling has 176 unit tests (`python -m unittest discover -s
scripts/tests`). The C++
suites pass too — 332 in `tests/libslic3r` and 126 in
`tests/slic3rutils`, the latter including
the boundary-translation and Creality CFS matching cases added here.
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
On macOS wxWidgets reports Ctrl+left as a synthetic right button, which is
what made Ctrl+drag pan the canvas. #14999 added an unconditional correction
of the event's button state from wxGetMouseState(), which reports the
physical buttons and knows nothing about that synthesis, so the synthetic
right button was overwritten with a plain left button on every event.
Ctrl+drag then matched the left button mapping and rotated instead of
panning.
Apply the correction only when the event carries no button state at all.
On macOS wx populates button state only for the mouse-down and mouse-dragged
event types, which are also the only ones the Ctrl+left translation touches,
so the ImGui capture fix keeps every event it was added for.
Fixes#15214
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Orca content-addresses every system filament, Bambu's included, but a printer,
its AMS and its vendor's cloud know only that vendor's own catalog ids. The
printer agent now translates between the two: outbound MQTT and FTP traffic, the
AMS mapping sent with a print job, and the ids written into a 3mf bound for the
printer all leave in the printer's own ids, while status messages, loaded
projects and SD-card prints arrive in Orca's. An id with no mapping passes
through unchanged, and an agent whose printers already speak Orca's ids
translates nothing at all.
Bambu's map is generated from BambuStudio's own shipped bundle; a missing or
unreadable file leaves every lookup an identity rather than taking the app down.
The profile check validates the map's shape, and profile CI now runs on the paths
that can change it. docs/HLSD/filament_id.md records the places the map
deliberately does not reach.
* Fix incorrect early exit for CLI mode no-support preventing parameters from being read
* Use PartPlate's m_height to allow CLI to perform proper BuildVolume check
* Add safeguard against extruder_pintable_heights and extruder_areas vector size mismatch
* Preserve printable_height precision in PartPlate/PartPlateList
* Fixed multiple BuildVolume warning issue, and keep check_outside diff minimal
# Description
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
Part 1 of 3 of the CLI-mode bug sweep, split out of #15452 per review
feedback there. This PR contains the crash fixes.
## Fixes
- **`--outputdir`/`--datadir` with a missing parent directory aborted**
via unguarded `create_directory`. Directories are now created
recursively, with a graceful early exit and a specific error message if
creation fails.
- **`--slice` + `--export-3mf` segfaulted on a from-scratch slice**:
`ConfigOptionVector::get_at()` on an empty vector is `.front()` of an
empty vector (UB). Guards added for `filament_color`/`filament_id` at
the CLI call site, and inside `DynamicPrintConfig::get_filament_type`
for `filament_type`/`filament_is_support`/`filament_id`. Only *empty*
vectors are treated as missing — the existing clamp-to-front behavior
for merely out-of-range indices is preserved, so GUI callers are
unaffected.
- **OOB heap write from stale `filament_self_index` on
`--load-filaments`** (fixes#14181): a 3MF carrying more
`filament_self_index` entries than loaded filaments wrote past the end
of `old_variant_counts`. The guard validates both bounds — entries `>
filament_count` *and* non-positive entries (`< 1`), since a single `0`
in an otherwise-valid array indexes `old_variant_counts[-1]`.
- **Wrong printable-area check** for non-rectangular beds: use the
printable area's bounding box instead of a naive vertex calculation
(fixes#15363).
- **`nozzle_height` and `align_center` were not read into the arrange
config** in CLI mode.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
- Repro'd each crash on CLI before the fix; all resolved after.
- `tests/libslic3r` suite passes; full binary builds clean on Linux.
- Added `get_filament_type` unit tests
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
* Reject invalid CLI argument values instead of silently accepting them
* Add read_cli accept/reject tests
* Update Option Type for LogFile argument
* Add read_cli vector option tests
* Accept common bool spellings on the CLI, cover --logfile in tests
* Add unit tests for truthy bool parsing
Kris Austin