On a Wayland session the in-canvas value field never took the keyboard focus, so
after drawing a rectangle the first keystrokes went nowhere and the field had to
be clicked before a number could be typed. open() already did Show, Raise,
SetFocus on both frame and control, SelectAll, and re-asserted all of it in a
CallAfter — none of it works here, and no amount of re-asserting would: under
Wayland a client cannot focus itself, and mutter ignores gtk_window_present()
without an activation token as focus-stealing prevention. The earlier fix
recorded in this file (dropping wxFRAME_FLOAT_ON_PARENT, whose GTK _UTILITY_
hint made an xrdp session refuse focus) addressed a different compositor.
Stop needing WM focus. The canvas keeps the focus and feeds the field:
SketchInlineEditor::feed_key() types into the control directly — Enter commits,
Esc cancels, Backspace/Delete edit, digits and '-' '.' ',' are accepted, and
anything else is handed back so a stray letter cannot vanish into a numeric
field. A m_fresh flag reproduces the SelectAll semantics the field already had,
so the first digit replaces the prefill. It returns false when the control
genuinely holds the focus, so X11 keeps wx's normal routing and no character is
typed twice.
The CHAR_HOOK gates on the editor's own is_open(), NOT on inline_busy().
inline_busy is a freeze flag for the sketch tool: cleared on commit, re-set only
when the next queued field opens, with a CallAfter between them. Gating on it
left a window where the field was on screen and the flag was false — typing
worked for a rectangle's Width and not its Height.
VERIFIED at the machine on behemoth: typing the first dimension directly, with
no click, works. NOT yet confirmed: the Width -> Height handover; the is_open()
gate is diagnosed from the handover code, not observed. The hook's
SNAPORCA_KEYTRACE=1 switch logs each key with the focused widget if it needs
chasing further.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Select a line in a sketch, right-click, and every sketch verb was greyed: Trim,
Extend, Fillet, Chamfer, Offset, Mirror, the arrays, Constrain. The menu was
right and the selection was gone — two independent faults, each of which hid
the other.
FIRST, the Select-mode RightDown branch called clear_selection() before handing
the click back. Handing it back is correct: the m_right_consumed flag means "the
tool USED this right-click", and a plain right-click is not a gesture
terminator, so the offer should open. Clearing first is not: the offer describes
WHAT IS SELECTED, so wiping the selection guaranteed it could only ever describe
nothing. Deselection keeps its own gesture — left-click on empty space, a few
lines above in the same handler.
SECOND, offer_selection_kind() returned SkNone for every sketch state. The offer
table has always carried verbs for a selected line, arc, point or pair, but
nothing ever RETURNED those kinds, so fourteen rows were gated on selection bits
no code path could set. Classify the selection instead: SkLine / SkArc / SkPoint
/ Sk2Ent, via a first_selected_type() accessor on the tool and two forwarders on
the canvas.
Either fix alone measures as a failure — the classification is handed an empty
selection, or the preserved selection has no kind to match — which is why both
land together.
This is the second half of the report behind 3eb6e5d608: a user comparing the
Design tab with Onshape said "adding constraints seems to be missing"
(OrcaSlicer PR #15238). Constrain was one of the fourteen dead rows, and the
gesture that would have shown it threw the selection away first.
Verified at the machine on behemoth by Tommaso: select a line of a rectangle,
right-click, and the sketch verbs are live.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
On a non-English desktop the offer menu came out mixed: "Create / Add material /
Rimuovi / Fillet / chamfer / draft / Repeat / Transform / Reference / Modify",
and under Modify, "Elimina" beside "Constrain sketch".
Nothing was mistranslated. The row names went through a bare wxGetTranslation(),
which searches EVERY loaded catalogue — including wxWidgets' own wxstd. That
catalogue is loaded in the desktop's language whether or not the application has
one, and it happens to contain exactly two of our eight row names:
wxstd it: 'Remove' -> 'Rimuovi', 'Delete' -> 'Elimina'
Create, Add material, Repeat, Transform, Reference and Modify are not wx
vocabulary, so they stayed English. Two words in one language, six in another,
in the same menu — and the same trap is set for every other locale wx ships:
Supprimer, Löschen, Eliminar.
Name the domain: wxGetTranslation(s, SLIC3R_APP_KEY). These strings are now
translated by our own catalogue or not at all, which is consistent either way.
Left deliberately alone: the accelerator still renders as "Canc" rather than
"Del" on an Italian system. That is wx naming the physical key, and on an
Italian keyboard the key really is marked Canc — telling that user to press
"Del" would name a key they do not have.
Verified on the rig with LANG=it_IT: the menu now reads Remove and Delete, and
the submenu shows "Delete Canc" beside "Constrain sketch".
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
A user evaluating the Design tab against Onshape reported that "adding
constraints seems to be missing" — with nineteen constraint types and a solver
shipped behind it (OrcaSlicer PR #15238, exussum12).
They were not wrong about what they could see. The only ways in were an
icon-only toolbar button whose tooltip you have to hover to read, and an offer
row gated on sketch_mode with a sketch ENTITY selected, filed under "Reference".
Right after finishing a sketch — the moment you want to constrain it — neither
was in front of the user, so a shipped headline feature read as absent.
Add a model-mode row: "Constrain sketch", offered under Modify when a sketch
region is selected, routed through the new btn:constrain verb action.
on_begin_constrain() also gains a fallback to m_sel_sketch_feat. The offer
reaches it from a SkLoop selection, which carries no TREE selection, and the
function read only tree_selection() — so the new row would have answered
"Select a sketch in the tree first" about a sketch the user had visibly
selected. It now adopts the region's owning sketch and syncs the tree to match.
Verified on the rig: draw a rectangle, finish the sketch, click the region,
right-click -> Modify -> "Constrain sketch" enters Constrain mode with
"Pick 1-2 lines, then a constraint" and the Constraints (8) card listing the
sketch's inferred constraints. That path did not exist before.
Does NOT address the other half of the report: there is still no Pierce
constraint, so a sweep profile cannot be tied to its path. Tracked separately.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
mass_properties on an open shell returned volume 96000 with an inertia diagonal
of [-4.2e7, -4.2e7, -6.9e7] for a 60x60x40 four-walled box — negative principal
moments, which no real body can have. BRepGProp::VolumeProperties integrates the
divergence theorem over whatever faces exist; on an open shell that is not a
volume at all, and the old code hid the only obvious tell by taking std::abs()
of the mass. "valid: true" then asserted the number was trustworthy.
This matters because mass_properties is what an agent or a user reaches for to
confirm a cut removed the right material. Silent nonsense there means the check
passes on garbage.
MassProps gains is_solid. For a sheet we compute surface area only — that stays
exact — and report volume 0 with the inertia left zeroed. The MCP verb returns
is_solid plus a note saying volume and inertia are not defined for an open
shell; the GUI's Mass command says "sheet body — N cm² of surface, no volume"
rather than quoting material that is not there.
Verified on the rig: the sheet now returns volume 0.0, surface_area 9600.0
(exactly 4 x 60 x 40), is_solid false. The solid controls are unchanged and
exact — a 60 mm cube reports 216000.0 and 21600.0.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Clicking a face that already happened to be selected, while a Plane or Axis pick
was armed, read as a repeat pick: the click escalated to "whole body", the
capture was lost, and the card's label stayed "(none)" with nothing on screen to
explain it. On a cube it is easy to hit — the face under the cursor is often the
one already selected from the previous step.
The capture path in on_solid_picked already restores the flag for all three
tools, and reset_plane_refs()/reset_axis_refs() restore it when a pick is
abandoned — both were written as if the arm side disabled escalation. Only
CoordSys actually did (that was snaporca-u0wd). Plane and Axis never had it.
Verified on the rig: Midplane on a 60 mm cube now captures Face A (#5, top) and
Face B (#3, side) on the FIRST click each, and the resulting plane renders as
the 45-degree bisector between them, which is what a midplane of two
perpendicular faces should be. Before this, the first pick escalated to the body
and Face A stayed "(none)".
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
Every method in CadDocument's plane dispatch falls back to offset_angle_plane()
when its references are missing. Picking Tangent and confirming with nothing
selected therefore produced an OFFSET plane, announced as "Plane added — pick it
as a sketch plane". The user asked for one construction and silently received a
different one, with nothing on screen to reveal the substitution.
Validate at the GUI boundary instead: Angle needs an edge, Midplane two faces
(and not the same face twice — that yields a plane coincident with the face,
which is well-defined and useless), Tangent a face, Two-edges two edges. Offset
and Coincident are unchanged: both are meaningful with no reference, since they
fall back to the base plane by design.
on_add_plane() now returns false when it refuses, and confirm_tool() skips
close_tool() in that case — a refusal that also threw away the picks the user
had already made would be worse than the bug.
The kernel keeps fallback_offset(): it must return something. It should just
never be reachable from a user gesture without a warning.
Verified on the Xvfb rig: Tangent with no pick refuses and creates no feature
(it created one before), the card stays open with the type preserved, Midplane
with no faces refuses with its own message, and Offset with no picks still
creates a plane as it always did.
Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
wxSpinCtrlDouble takes the mouse wheel whenever the pointer is over it. A card
taller than the panel therefore could not be scrolled past without silently
incrementing whatever field the cursor happened to be over — measured on the
rig: eight notches over the Coord Sys card turned an X hint from 1,00 into 6,00
while the panel did not move at all. The same gesture over an Extrude distance,
a Hole diameter or a mate Offset is a silent model change made by someone who
believed they were navigating, and nothing on screen reports it.
Every spin in this panel comes from one factory, so the guard goes there: an
unfocused spin hands the wheel to its parent, and the scrolled cards panel gets
it. A spin the user has deliberately focused still takes the wheel, which is the
one case where editing is what was meant.
Verified on the rig with an Extrude card: eight notches over an unfocused
Distance leave it at 10,00; clicking into it first and scrolling takes it to
13,00.
A mate between two connectors committed cleanly, recomputed without error, and
moved nothing. apply_mate was reached and computed a translation of exactly
(0, 0, 0).
The connectors were the cause, not the mate. Picking a face stores
coordsys_face and coordsys_body but left the Type combo on its default,
Point (world) — and datum_frame ignores the pick entirely for that type,
resolving the connector to coordsys_point, which is (0,0,0) unless the user
typed otherwise. Two connectors built that way share one frame, so the mate
between them is an identity transform: everything reports success and the
assembly never moves.
Capturing a face or an edge now switches the type to FaceAndDirection. Picking
a face IS the choice of a face-based frame; asking for it twice, with no hint
that the second half is required, is what made every mate a silent no-op.
Verified on the rig, two bodies with a face-based connector each:
before Extrude4 [-71.6, 402.6, 156.5] .. [-8.8, 412.6, 237.3]
after Extrude4 [-31.4, -40.4, -10.0] .. [ 31.4, 40.4, -0.0]
with the mate transform now (40.19, -196.88, 402.56) instead of (0, 0, 0).
That is the first mate in this tree that assembles anything.
Not the kernel: recompute applies mates exactly as preview does, proven by an
A/B harness over all five kinds — the two paths give identical bounding boxes.
1. A consumed loop WITH HOLES was never dropped from the sketch overlay.
sync_sketch_display compares each region's entity list against what a per-loop
extrude stored, but rebuilt the candidate from the region's OWN entities while
the extrude stores the region's entities PLUS every hole's (see
selected_loop_entities). For a plate with one bore that is 4 against 5, so the
match never fired and the extruded rectangle stayed drawn on top of the solid
it had become. Adds region_entity_indices_with_holes, which returns the same
order the extrude uses, and compares against that; a matching region now drops
its holes' entities too. Hole-less regions are unaffected.
This is also the artefact that made a correct plate-with-a-bore read as a
plate with a plug in it during rig testing.
2. The Constraints card drew its header and its first row on top of each other.
The rows and the delete buttons were parented to m_form rather than m_cards,
so they were laid out in the wrong window's coordinate space and started at
the card's top edge. Re-parented; nothing else about the card changed.
3. The mate hover ghost never appeared. The highlight handler asked for a repaint
with request_repaint(), which only queues a Refresh — and a wxMenu popup runs
its own modal loop, so the paint was not serviced until the menu closed, by
which time the ghost had been dropped. Adds DesignCanvas::repaint_now(), which
flushes the paint immediately, mirroring the m_status->Update() the status line
in the same function already needed for the same reason.
Delegated to opencode (DeepSeek V4 Pro) and reviewed by diff. Fix 1 needed an
accessor on DesignSketchTool because region_loops/RegionLoop are private — that
was outside the file list it was given, and it said so rather than working around
it.
Verified on the rig: a rectangle-plus-circle sketch extrudes to a plate with a
bore and NO overlay left on top of it, and the Constraints card shows its header
clear of eight readable rows.
Leaving Sketch clears the "N degrees of freedom" line, which is right — it
describes a sketch's constraint state and means nothing in Feature mode. But
entering CONSTRAIN left it blank too, and Constrain is where the number is the
whole point: the readout is fed only by a live solve, and no solve fires merely
because the mode changed, so the line stayed empty until the user happened to
change something.
The solve callback now caches its last result and the labelling is split into
apply_dof_status(), which set_ui_mode re-applies on entry to Constrain.
Verified on the rig: a rectangle reports "4 degrees of freedom" in Sketch, and
the same line is there after K enters Constrain.
The edge and vertex tolerances were fixed at 8 and 11 px. On a face that is
barely wider than that on screen — a thin plate, or any part once you zoom out —
every point on it lies within the edge budget, so the pick alternated edge and
whole body and the FACE level could never be reached at all. That is not just
awkward: a face pick is what gives a Coord Sys its owning body, and a mate needs
one, so thin parts could not be assembled.
Both tolerances are now capped at a third of the face's shorter on-screen side,
measured from the edge samples the picker already walks. They only ever shrink,
so a face with room keeps the full budget and nothing changes for ordinary
geometry; a narrow one keeps its middle for itself.
Verified on the rig on a 16.7 mm-wide plate at three zoom levels including one
far enough out to make the face a thin sliver: the middle reports "face 5
selected" every time, while points near the rim still take the edge.
A card that asks for a face ("Click a solid FACE in the viewport") could not be
satisfied. Clicking the same sub-element twice deliberately escalates to the
whole body — right for free picking, wrong here: the user clicks the very face
the card is pointing at, the escalation turns it into a whole-body pick, and the
armed capture rejects it and leaves "(none)". Both orders failed, so a
face-based Coord Sys was reachable only by accident of ordering. That mattered
beyond the card: a mate needs a connector with an owning body, and a face or
edge pick is the only thing that sets one.
Adds DesignSketchTool::set_escalate_on_repick, off while the Plane, Axis or
CoordSys card has a pick armed and back on as soon as it is captured or
abandoned. While armed, clicking a face means "this face", which is what the
prompt already says.
Verified on the rig: arm Pick Face, click the face, and it reads "#5" on the
first click. With nothing armed the escalation still alternates whole <-> face
as before.
The mate palette called all five kinds viable on connectors created as
Point(world), which belong to no body. Clicking one built the Mate feature and
the RECOMPUTE then failed with "mate: mate_cs_b has no associated body" — the
refusal arrived one step too late, after the feature was already in the tree,
and the user is told about it by an error line rather than by the palette that
offered the thing.
mate_options now checks the same two conditions the apply path throws on: B must
have a body (B is the connector whose body moves; A is the fixed reference and
needs none), and that body must still resolve. Either way all five kinds go
non-viable with a reason, so the offer and the kernel cannot disagree.
Verified on the rig: with two Point(world) connectors, every row is now dimmed
and reads "connector B is not attached to a body — a mate moves B's body". That
also exercises the dimmed-with-a-reason presentation for the first time, which
until now had nothing to show because every kind was always viable.
Tests: a new [mate] case covering no body, a body that no longer resolves, and
the revival once B is given one. One existing case needed its setup widened
rather than its assertion weakened: "an unrecorded fingerprint does not make a
type non-viable" built two body-less connectors, so it was asserting a side
effect of the old permissiveness instead of the property it is named for. Its
connectors now have a body, leaving the missing fingerprint as the only variable.
Full [CadDocument] suite: 2458 assertions in 185 cases.
Right-clicking a document with two coordinate systems builds the mate palette
exactly as designed: a separator, a disabled "Mate: A -> B" header, then five
rows in fixed order. Hovering a row showed no ghost and left the previous status
message on screen; clicking one created nothing at all. The palette enumerated
perfectly and fired nothing, which put the whole M8 mate epic out of reach from
the UI.
The mate handlers were never invoked. show_offer_menu binds two pairs of
handlers to the SAME wxMenu: the mate pair (by mate_base, at base + 500) and the
generic verb pair. wxWidgets pushes dynamic entries to the FRONT of the handler
list, so the pair bound LAST runs FIRST for every id — and the generic pair was
last. A mate id lands outside the verb table's range, so both generic lambdas
returned early WITHOUT e.Skip(), which wx reads as "handled", and the mate
handlers behind them never saw the event.
Binds the two generic handlers to the verb id range [base, base + 499] so each
half only sees its own ids regardless of bind order.
Verified on the rig with a purpose-built assembly (two bodies 60 mm apart, a
Coord Sys on each): before, clicking Fastened produced no feature and no status
change; after, it produces a Mate feature. The verb rows keep working — the same
run created both coordinate systems through Reference > Coord Sys.
Note the mate then fails its recompute with "mate: mate_cs_b has no associated
body", because a Point(world) coordinate system belongs to no body while the
palette still advertises all five kinds as viable. That is a separate defect and
is filed; this commit is about the palette being reachable at all.
Reopening a saved CAD design ended on a modal "The file does not contain any
geometry data." warning. A CAD project legitimately carries no mesh — the model
lives in the feature tree (Metadata/SnapOrca_cad.bin) until Commit to Plate — so
the warning is false for one, and it is the last thing the user sees after
opening a design they spent an hour on. It reads as "your work is gone" at the
exact moment the recipe HAS just loaded and the Design tab is about to rehydrate
it, and the main window sits disabled behind the dialog until it is dismissed.
Counts a non-empty model.cad_recipe as geometry.
Verified on the rig: save without Commit to Plate, reopen, and the Design tab
comes up with Sketch1 -> Extrude2 -> Body 1 editable, with no dialog at all.
A rectangle with a circle inside it, drawn in ONE sketch, could not be extruded
to a plate with a bore from the GUI. Five defects were in the way. Each was
found by driving the app on a headless rig and measuring the result — the code
reads correctly at every one of these points, which is why they survived.
1. Wire orientation (kernel). SketchEngine::wires_to_face added every hole as
wires[i].Reversed(), which is only right when the sketch happens to wind both
loops the same way. A circle drawn clockwise inside a counter-clockwise
rectangle came out matching the outer boundary, OCCT swept it as a SECOND
contour, and the prism was the plate with its bore filled and the disc's
volume counted twice. Measured: bbox 67.17 x 219.67 x 10 with volume
152088 mm3 against a solid box of 147542 — a body larger than its own
bounding box, which is the signature. Holes are now added as-is and
ShapeFix_Face::FixOrientation() classifies them; that is winding-independent
and is the idiom make_extrude_regions already used for imported glyphs, which
is why holed TEXT always extruded correctly while a holed SKETCH never did.
After the fix: 142996 mm3, implied bore radius 12.03 mm against the circle
drawn.
2. The live-sketch click threw the picked region away. region_at() served only
as a yes/no gate and on_face_selected() carried no argument, so Extrude fell
back to whichever loop the resolver found first — clicking the material of a
plate-with-a-hole extruded the disc. The region is now carried through, and
DesignPanel also hands it to the tool with set_loop_pick(), AFTER open_tool()
because that re-derives selection state, since extrude_uses_loop() reads
selected_loop_entities() and that lives on the tool.
3. region_at() had no hole awareness and no innermost preference: it returned
the first polygon containing the point. It now skips a region when the point
lies inside one of that region's holes, and picks the smallest containing
loop, so a click in the bore selects the disc and a click on the material
selects the plate.
4. Startup segfault. DesignCanvas::request_repaint probed the GL backend via
OpenGLManager::get_gl_info().get_renderer() before the canvas had initialised
GL — glGetString with no context current and, before init_opengl(), no loaded
function pointers. Anything that asked for a repaint while the panel was
still being built landed there, with no window and nothing in the log. It now
bails at the top on !is_initialized() and asks for a Refresh instead. Note
the crash was in the PROBE, not in render(), which already guards itself.
5. A holed sketch on a plane whose normal points -Z came out as the full box PLUS
a disc — 220274 mm3 where 163726 was due (192000 + 28274). wires_to_face took
a SketchPlane parameter it never used and let OCCT infer a surface from the
outer wire; when the inferred normal disagreed with the sketch's, the hole
classification produced no hole. Every face is now built on the sketch's own
gp_Pln.
Also in this change, from the same rig session:
- A right-click that only clears the sketch selection no longer reports itself
as consumed, so it stops suppressing the offer menu. With any geometry in a
live sketch there was no menu route left to add a second entity.
- Escape no longer discards a live sketch that holds drawn geometry; it says so
and keeps the work (live_sketch_has_work()).
- The holed-region fill is an even-odd scanline instead of a keyhole bridge, so
no corridor triangle leaks from the bore to the nearest corner.
- Cyan is reserved for the selection: an unselected region no longer wears a
shade one step off the selected one.
- The origin planes follow the mode, so pressing Sketch on a document that
already has a body offers them again instead of naming a plane you cannot see.
Tests: three [holes] cases over add_extrude_entities asserting the plate-with-bore
volume, solid and face counts on both a +Z and a -Z sketch plane, and the
by-name refusal of two disjoint regions. Full [CadDocument] suite green.
Delete a sketch on a document that still has a body and you could not start a new
one. Pressing Sketch said "click a face or a reference plane in the viewport" —
while update_reference_planes had already called clear_base_pick, because a body
existed. The instruction named something that was no longer there, and short of
finding a face to click there was no way back into sketching at all.
The planes are now offered when there is no solid yet OR while the UI is in
Sketch mode, and set_ui_mode refreshes them so they appear the moment you press
Sketch rather than at the next tree rebuild — which is not an event that pressing
Sketch causes.
Deliberately not always-on. m_dbp_active both RENDERS and picks, so leaving it
set would float three translucent planes over every finished model. Tying them to
the mode shows them exactly when they are the thing being chosen and takes them
away again on Finish.
Safe against stealing clicks: a base-plane pick is the last resort in on_mouse,
firing only on a click that hit no geometry, so solids and committed sketches
still win where they overlap.
Found on the rig by Tommaso: "if i remove a sketch, i cannot create sketches
anymore".
A rectangle with a circle inside it extruded to a plain box. Tommaso reported it
exactly right on the first attempt — "no intersection selectable, hence no plate
with hole" — and it was a causal chain, not a guess.
Two things were wrong and they compounded.
region_loops() returned N independent filled polygons with no notion of nesting,
so the only selectable things were the rectangle alone and the circle alone. The
region a user actually wants — the bounded area WITH its hole — did not exist to
be pointed at. Worse, the first polygon containing the click won, so clicking
inside the circle selected the rectangle.
And extrude_uses_loop() hands selected_loop_entities() to add_extrude_entities,
which copied only that one loop's entities into the feature. So the circle never
reached the kernel, build_sketch_face saw a single loop, and the multi-loop path
added in 5c4ced91e7 never ran. Proven from his saved project: Sketch1 held 5
entities, Extrude2 held 4, and the committed mesh was 8 vertices — a box of
260.40 x 220.91 x 10.00. Eight vertices cannot describe a bore.
A RegionLoop now carries the loops nested inside it. Containment is decided by
testing one vertex, which is sufficient because loops in a well-formed sketch do
not cross, and each loop is assigned to the SMALLEST loop containing it so a hole
belongs to the region that actually bounds it. Picking respects holes: a click in
the plate selects the plate, a click in the bore selects the disc. The selection
hands over the region's own entities plus its holes', which is what finally
reaches the kernel. The highlight lights the holes with their region, because it
has to show what will be extruded.
The status line said "Loop selected"; it now says "Region selected". What is
selected is a bounded area that may contain holes, not a single closed curve —
the old wording described the old, broken behaviour.
snaporca-txp8, and it is what makes snaporca-88v reachable from the GUI at all:
the kernel could build the holed face all along (verified on his own recipe:
2 closed loops, wires_to_face OK, area 74812.119 mm2), but nothing could ask it to.
Reviewed and compiled (RC=0). NOT exercised — the rig check is the point.
Modelling in the Design tab and pressing Ctrl+S saved a project with no feature
history at all, and the app reported success. Found on the rig: a project saved
after drawing a rectangle and a circle contained twelve archive entries, none of
them Metadata/SnapOrca_cad.bin, and a 3dmodel.model with zero vertices.
plater->model().cad_recipe was assigned in exactly one place — on_commit(),
immediately after load_mesh_object. The 3MF exporter was never at fault: it
faithfully wrote whatever the Model held, and on a save that had not gone through
Commit to Plate that string had never been set. The recipe reached the Model only
as a side effect of a different user action.
It now tracks the document instead. sync_recipe_to_model() is called after a
successful recompute, after tree edits (deletes, reorders and suppressions bypass
recompute_guarded), and from on_commit, which delegates rather than repeating the
rule. Only on success — a failed recompute leaves the document mid-edit, and
persisting that would save a model the user never had. An empty document still
clears it, so a non-CAD project carries no stale recipe.
Doing it here rather than in the save path is deliberate: Ctrl+S, Save As,
autosave and crash recovery all read model.cad_recipe, so keeping it current
after each change makes every one of them correct at once, instead of teaching
each save path to ask the Design tab. Commit to Plate means "send this to the
slicer" — making saving depend on it was the bug, not the cure.
Cost is one serialization per recompute, tens of KB against an OCCT rebuild that
has just run.
Why nothing caught it: the kernel round-trip tests serialize a CadDocument
directly, and the 3MF tests exercise the exporter with a recipe already present.
Neither can observe that the GUI never populates it, and every save in testing
happened to follow a Commit to Plate.
snaporca-vjk5. Reviewed and compiled (RC=0); persistence NOT yet confirmed on the
rig — that check is the reason the issue stays open.
This script builds only libslic3r_tests, which links libslic3r and no GUI code —
but cmake still processed the whole if(SLIC3R_GUI) block and every find_package
inside it, so the kernel suite silently depended on the GUI's dependency set.
That came due the moment upstream added wxInspector as a REQUIRED find_package:
the orcacad-deps image predates it, so configure died pointing at
src/CMakeLists.txt:92 with nothing about the kernel having changed. Turning the
block off is not a workaround for that one dependency — it is the suite finally
declaring what it actually needs, so the next GUI-side dependency added upstream
cannot break it either.
Surfaced by taking SoftFever's merge of main into the PR branch.
He merged upstream main into the PR branch himself on 2026-08-13. Taking it into
the local branch rather than force-pushing over it: the fork copy is what PR
#15238 shows, and discarding a maintainer's merge to make my own push
fast-forward would be both rude and a loss of 130 upstream commits.
Brings the branch far closer to main than the 2026-07-24 merge-base the PR body
describes, which is most of what snaporca-36u9 was filed for.
Every version bump so far has permanently orphaned every project saved before
it. deserialize_recipe refused anything that was not exactly the current
version, and with no migration path v2 and v3 projects are unopenable today —
the 3MF still carries the mesh, so the user gets a frozen solid and no feature
history, which is the whole point of the subsystem silently absent.
The cause was the shape of the data, not the gate. save/load is one flat
symmetric list of ~90 fields with no framing, so a reader has no way to know
where a feature ends unless it agrees on every field.
Each feature is now written as its own cereal stream behind a length prefix, and
the same few lines handle both directions of mismatch. Older file, newer build:
the sub-stream ends early, the read throws, and the fields already assigned are
kept while the rest default — cereal assigns sequentially, so a mid-list throw
leaves the earlier fields set, and that is what makes this work. Newer file,
older build: the sub-stream holds more bytes than the reader knows; it reads what
it knows and stops, and the outer stream is untouched because the length prefix
was consumed in full. A field a project predates is not a corrupt project, so
neither case is an error.
v4 keeps its own pre-framing flat path and opens exactly as before —
cad_recipe_v4.bin is untouched and now serves as the witness for that. v2 and v3
stay refused, by name: their field lists no longer exist in this code. This fixes
the future, not the past, and the comment says so rather than implying otherwise.
From here a new field only needs appending to save/load — no bump, no orphaned
projects. That removes the cost that had blocked snaporca-44m and snaporca-dgv.
The helix round-trip test was reading the blob back flat, reaching into the
format instead of through it; framing necessarily breaks that, so it now goes
through deserialize_recipe, which is a stronger assertion than it made before.
Every field check it carried is unchanged.
Tests: four new [CadDocument][recipe] cases, including the one the change exists
for — a deliberately truncated feature blob must LOAD, keeping what it could read.
Suite 177 -> 181 cases, 2366 -> 2411 assertions.
snaporca-2txy.
deserialize_recipe distinguishes three cases that matter very differently to the
person reading the message — saved by a NEWER build, saved by an OLDER one, or
genuinely unreadable — and names the version in each. load_recipe threw all of
that away and printed one generic sentence, so the user could not tell "update
SnapOrca" from "your file is damaged", and had no way to find out.
Same error-loss class as the 31 McpControl sites fixed in 1de72de9ed: the message
existed, it was simply not passed on. The generic sentence stays as the fallback
for the case where the kernel really has nothing to say.
This does not make old projects loadable — that is snaporca-2txy, which the audit
behind this change opened. It only stops the reason being withheld.
snaporca-2txy (partial). Reviewed and compiled (RC=0), not exercised.
entities_to_wire handled exactly two shapes of sketch: one lone Circle/Ellipse, or
any number of Line/Arc/EllipseArc/BSpline pushed into a single MakeWire. Everything
else fell off the end as a null wire, so a circle drawn inside a rectangle — the
most ordinary thing in this whole program — refused with "not supported yet". Two
separate closed polygons were quietly worse: both went into one MakeWire, which
does not mean "two loops" to OCCT.
entities_to_wires now returns one wire per loop. A Circle or Ellipse is a loop on
its own; chain entities are grouped by shared endpoints (union-find, 1e-6 in sketch
coordinates), and an open chain still comes back as a wire because a sweep path is
legitimately open. It is all-or-nothing: one loop that fails to build poisons the
whole result, because a partial profile would extrude a shape the user did not draw
— the failure 2e6a8f9e91 was written to stop.
entities_to_wire survives as a two-line wrapper returning the single wire when
there is exactly one loop and a null wire otherwise, so all nine of its call sites
keep their exact contract and Revolve/Sweep/Loft/Surface* are untouched. What a
holed profile means for each of those is a separate question.
wires_to_face takes the largest-area loop as the outer boundary and adds the rest
reversed, which is how OCCT is told a wire is a hole. Containment is CHECKED with
BRepClass_FaceClassifier, not assumed: a loop outside the largest one is a second
island, and one sketch producing several solids is a much bigger feature, so it is
refused by name ("two disjoint regions") rather than guessed at.
Only the Extrude case consumes the new face. Tapered extrudes of a holed profile
are refused — offsetting inner loops has to go the opposite way — and the guard
counts wires on the face already built rather than rebuilding every wire to ask how
many there are, which is also the more honest test: what matters is the profile
being extruded.
Tests: six new [CadDocument][sketchwire] cases, proved by VOLUME rather than by not
throwing — plate-with-hole, two holes, and two regression guards that a lone circle
and a lone polygon extrude exactly as before. Suite 177 cases / 2366 assertions.
No serialized field, recipe version untouched, golden fixtures unchanged.
snaporca-88v.
Third and last piece of the selection model. The other two turned out to be
built already — the rubber band is pick_bodies_in_rectangle and vertex picking
is SolidSel::Vertex with its camera-facing square, both live — so this closes
what the issue actually still described.
Vertex beats edge beats face is a rule the user cannot see until after they have
committed to a click. Showing the outcome under the pointer is what makes the
precedence learnable at all, and is the charter's L5 read honestly: one click,
one visible change means the change has to be predictable BEFORE the click, not
only explicable after it.
The resolution is now one function, resolve_solid_pick, const and writing only
into its out-parameter. The click applies it and then runs its escalation
unchanged; the hover applies nothing. Split this way the promise cannot drift
from the act — a second implementation of "what is under the cursor" would
eventually disagree with the first, and the disagreement would look like a
picking bug rather than a duplication one.
Rendering is likewise one function called twice. The pre-highlight draws first
so the committed selection paints over it, and is suppressed entirely when the
two are the same thing: two coats of the same colour reads as a rendering fault,
and a promise about a click that would change nothing is not worth making. It is
desaturated toward white rather than given its own hue — a distinct colour would
read as a distinct KIND of selection, when it is the same selection one moment
earlier.
Two things that would have been silent bugs. The edge ribbon and the vertex
square render with GL_BLEND off, so an alpha below 1 there is ignored; those two
are quietened by a muted rgb and only the blended face fill takes the alpha
multiplier. And the pre-highlight is cleared in clear_solid_selection, because it
names a face by an index into a shape a recompute has just rebuilt — left behind,
it would keep glowing on whatever now sits at that index, a real entity but not
the one meant.
Hover runs on plain motion only, with no button down and no band running: during
a drag the pointer is doing something else and a promise about clicking would be
a lie. It returns false so the event still reaches the camera — it asks for a
repaint, it does not consume the gesture.
snaporca-9xw. Reviewed and compiled (RC=0), not exercised.
Tommaso reported the array controls as missing. They were not — Shift+N opens a
Pattern card with every control correct — but the report was fair. With no body
the button accepts the click, opens nothing, and writes its refusal somewhere
other than where the click happened. From the user's seat that is
indistinguishable from a dead button, and the icon is one unlabelled glyph among
fourteen, which is how I mis-clicked it into Section view while reproducing this.
A control that cannot act should look like it cannot act, before it is pressed.
The three FEATURE buttons carrying a body-count guard — Pattern and Cut at one
body, Boolean at two — are now greyed below their threshold with a tooltip
naming what is missing.
Only those three. The same guard shape also appears on rows INSIDE the flyouts,
and those stay live: a drawer holds sketch-only entries too, so disabling the
drawer would hide tools that are perfectly usable. The keyboard shortcuts keep
running the guarded action rather than being gated — a key press has no
greyed-out state to see, so the sentence is the only feedback there is.
Re-evaluated in feed_bodies(), before its viewport early-return since this is
about the toolbar and not the canvas, and once after the toolbar is built: an
empty document is the state the bug was reported in and feed_bodies has not run
yet on a fresh tab.
snaporca-o9j. Reviewed and compiled (RC=0), not exercised.
Two independent leftovers, both in the same status area.
snaporca-752: the "N degrees of freedom" line described a sketch's constraint
state and stayed on screen after Confirm, Cancel and the Escape downgrade, in
Feature mode where it means nothing — visible in every Feature-mode screenshot of
the 2026-07-27 sweep. Cleared in set_ui_mode rather than at those three exits,
because that is the one place all of them pass through and a fourth exit added
later would otherwise reintroduce it. Constrain mode keeps the readout: that is
where the number is the whole point.
snaporca-8cc: moving the status out of the panel and into the viewport HUD
removed the clipping, but not the underlying problem. The chip is a top-level
popup that Fit()s to its text, so a long sentence grew past the right edge of the
canvas and hung over the window instead of being cut off inside it — the same
silent length limit wearing a different hat. The label now wraps to the room
actually available (canvas width minus the view-cube inset), which is what makes
the earlier promise that "a sentence can be a sentence" true at 1366 as well as
at 1920.
SetLabel + Wrap + Fit are now one function called from both the text change and
the placement. Wrap() rewrites the label it is handed, so it has to follow a
fresh SetLabel every time, and the placement path runs on resize — a chip wrapped
for the old width either overhangs a narrowed canvas or wastes a widened one.
The left inset is one constant now because the wrap width and the anchor have to
agree, or the chip wraps to a width it is not then given.
snaporca-752, snaporca-8cc. Reviewed and compiled (RC=0), not exercised.
The .pot, the Italian .po and list.txt are build product: 27,314 of the added
lines in this branch were regenerated catalogues rather than code, and a reviewer
running git diff --shortstat met that number before anything else. Restored to
the merge-base so their diff is zero; they regenerate from source with
scripts/run_gettext.sh whenever the maintainers want them refreshed.
The Romanian catalogue goes with them, for a different reason: it is a complete
new translation and deserves its own PR rather than riding along inside a CAD
feature, where nobody qualified to review it would think to look.
Nothing here changes what the Design tab does. The strings are still marked for
translation in the sources; only the generated catalogues are out.
m_hole_on_face and m_thread_on_face are cleared only by their tool's flyout and by
their plane combobox, so after any on-face hole or thread the flag stays true for
the rest of the session. load_feature_into_dialog restored the stored plane into
the dropdown but never touched the latch, so re-editing from the feature tree
ignored the plane it had just restored: hole_plane() returned the still-latched
face plane, which may belong to a different face, a different body, or a body
since rebuilt. Silent until snaporca-200 added the "On face" row, which then read
as a confidently wrong answer rather than as nothing.
The latch is now rebuilt from the stored feature, which is the only source that
describes THIS hole. Not from the dropdown row: index_from_plane snaps an
arbitrary face plane to the nearest XY/XZ/YZ, so driving the re-edit from the row
would MOVE a hole drilled on a slanted or offset face — that was the reason the
other candidate fix was rejected.
is_base_plane() decides which of the two a stored plane is. It compares the origin
as well as the axes (a plane parallel to XY but 12 mm up snaps to row 0 and would
come back at z=0), and adds modeling_origin before comparing, because hole_plane()
and thread_plane() add it to the dropdown plane before the feature stores it — a
document with a shifted origin would otherwise mistake every dropdown hole for a
face pick. Vector norms, not isApprox, which is relative to magnitude and useless
against the zero origin.
The face's (u,v) extent is not serialized, so m_hole_has_bounds is cleared: the
gizmo's footprint clamp goes unbounded, which is honest, where another face's
bounds are not. The label says which body the face belongs to instead of a face
number the feature does not carry; "(none — uses Hole plane)" is the one thing
that is definitely false there.
snaporca-uif9. Reviewed and compiled (RC=0), not exercised.
refresh_preview() listed Tool::Mate among the features that produce no solid and
cleared the ghost, with a comment saying a mate has no 3D ghost. The kernel never
agreed: preview() routes a Mate candidate through apply_mate on a throwaway copy
of the bodies, and build_candidate already filled the mate fields. That one early
return was the whole of epic gap G3.
A mate makes no NEW geometry but it MOVES a body, and the moved assembly is the
ghost worth showing. Both the Mate card and the offer's mate palette now show it:
hovering a palette row previews that kind, leaving the row drops it, and choosing
one commits. Nothing is written to the document until the click.
The committed bodies are hidden while the ghost is up — it is the whole assembly
in its post-mate pose, not an added lump, so leaving them visible would draw the
mated body twice and z-fight every other body against its own copy. Same reason
Dressup and Draft hide them.
Cleanup is after PopupMenu rather than on a close event: PopupMenu is modal, so by
then the menu is gone and any command it raised has run. A flag distinguishes a
ghost this menu put up from a preview that was already on screen.
snaporca-b4sp. Reviewed and compiled (RC=0), not exercised.
snaporca-lukg part B. The issue describes building a contextual viewport palette
with a stable icon set, non-viable options dimmed and explained rather than
hidden, and edge-aware placement. show_offer_menu() already does all three — its
dead-row branch appends a disabled row with " — " and a reason, and wxMenu
places itself against the screen edge. So this is not a new widget. It is one
section added to that menu, fed by mate_options().
The header row names the pair: "Mate: A → B". That is epic gap G4 — the mate card
is abstract dropdowns and never says which body moves. B is the connector on the
body that MOVES, so B is the arrow's destination; the parameter order invites the
opposite guess, which is why it is commented at the point of use.
Five rows in one loop over the kernel's result, never reordered and never
filtered. The palette addresses rows by position, so a shorter list would move
every row below it — which is the whole argument for dimming instead of hiding.
The pair comes from the Mate card's combos when that card is open, so the offer
and the card cannot disagree about what they are acting on; otherwise the first
two enabled connectors, which is defensible only because the header names them.
An offer acting on an unnamed pair would be worse than no offer.
REVIEW CATCH: the five type names arrived as an array indexed by kind, read as
_L(table[i]). That compiles and is silently untranslatable — _L is a gettext
macro and the extractor scans SOURCE for literals, so five strings would have
shipped that are never in the catalogue. These names appear nowhere else in the
tree, so that would have been their only occurrence. Now a switch of literal
_L() calls.
G3 INVESTIGATED, NOT BUILT, as specified. preview() DOES handle a Mate candidate:
it copies the committed bodies to a temporary and routes the candidate through
apply_mate on that copy, committing nothing, and build_candidate already fills
the mate fields. The only blocker to a hover preview is refresh_preview()'s
Tool::Mate early return, which clears the preview on the belief that a mate has
no ghost. Nothing in the kernel refuses it. Filed rather than built.
Reviewed and compiled (libslic3r_gui, RC=0); not exercised. snaporca-lukg.
snaporca-lukg wants a palette offering all five mate types with the non-viable
ones DIMMED AND EXPLAINED rather than hidden — its reasoning being that a menu
changing shape between invocations destroys the motor memory experts rely on.
That needs an answer this document could not give. This is that answer, and
nothing else: mate_options(cs_a, cs_b) returns five MateOption{kind, viable,
reason}, always five, always in kind order, never filtered.
The geometry test rides on the fingerprint added for snaporca-kqih, which is why
it costs no new serialized field: coordsys_face_kind already records the surface
type. Revolute and Cylindrical need a cylindrical face at both ends because they
need an axis to turn about; Planar needs flat faces; Fastened and Slider
constrain frames rather than surfaces, so no geometry test applies to them.
UNKNOWN IS PERMISSIVE. A fingerprint of -1 means PointWorld or a connector that
has not resolved yet, and it does NOT make a type non-viable. Refusing on missing
information is the false-alarm behaviour that gets a whole feature ignored — the
same reasoning already recorded on kqih for the drift warning, applied again
because it is the same trade.
Reasons name WHICH connector is the problem when only one is. "needs a
cylindrical face at both ends" tells the user what the rule is; "connector A is
on a flat face" tells them where to look, and the second half is the one that
saves the time.
The stability contract has its own test, asserting five entries in kind order
even for a completely invalid pair. That matters more than any individual
verdict: the palette addresses rows by position, so a shorter list would move
every row below it.
Golden fixture unchanged — this is a pure query. Suite 167 -> 171 cases,
2284 -> 2348 assertions, green. snaporca-lukg part A; the palette is part B.
snaporca-rgbj measured the damage: four chamfers on a box remove
0.400/0.397/0.397/0.395 mm3 when each id is re-read, and
0.400/0.008/0.397/0.280 when the four ids are captured up front. The kernel is
right in both runs — the second one asks for the wrong edges. Neither errors,
because a stale id still resolves to a real edge, just not the one that was
measured.
That makes it an API problem rather than a script bug. Reading the scene once and
then issuing several operations is the natural way to drive a socket, it is what
every agent will write, and it produced silently wrong geometry with nothing
anywhere reporting it.
CadDocument::topo_generation is bumped where the bodies are replaced — the single
line in recompute() where the face and edge maps actually change, so a feature
type added later cannot forget to bump it, which a per-mutator counter would
invite. describe_scene and query_topology return it. A caller may pass it back as
"generation" on any call, and a mismatch is refused with a message that says what
to do about it.
Two deliberate choices:
OPTIONAL, not mandatory. Every existing script keeps working unchanged; passing
the generation is what buys the guarantee. Making it required would break every
caller to fix a mistake only some of them make.
CHECKED AT THE DISPATCHER, not in each handler. One site covers fillet, chamfer,
shell, draft, coordsys, thicken, cut, project, delete_face and everything added
after them. A per-handler check is a list that goes stale the first time someone
adds a method in a hurry.
Not serialized: an id means something only within the run that produced it, so
persisting the counter would promise a stability the ids themselves do not have.
No recipe version change.
describe_tools now carries an id_lifetime note, because the guard only helps a
caller who knows to ask for it.
Kernel suite 167 cases / 2277 assertions green; libslic3r_gui builds. The guard
itself is NOT exercised — it needs the socket, so it is on snaporca-bdco.
snaporca-o1l2.
kqih option (c). A FaceAndDirection connector stores a global face index, and an
upstream edit can renumber faces so the index silently names a different one. The
DANGLING case already threw; this is the in-range-but-wrong case, which nothing
detected.
Fingerprint the face on first resolve, compare afterwards, and report a mismatch
into mate_conflicts — the channel that already marks the tree row — never as an
error. A drift warning must not abort the recompute, because the alternative
makes a legitimate Draft on a mated face fatal.
WHAT THE FINGERPRINT IS, AND WHAT IT IS NOT. Surface type plus edge count. Not
centroid or area: legitimate parametric edits move and resize faces, which is the
entire point of the model, so either would fire on every dimension change. Not
the normal, which is the tempting one — Draft deliberately tilts a face and
Transform reorients a body, both legitimate. Type and edge count survive rigid
motion, tilting and resizing, and catch the case that actually happens: a planar
index sliding onto a fillet's cylindrical face after a dress-up inserts faces.
The accepted cost is that a slide between two planar 4-edge faces is invisible. A
partial detector that never cries wolf beats a total one that does, because a
false alarm on a valid connector teaches people to ignore the warning.
Connectors with no fingerprint record one on first recompute, so old recipes
self-heal and both writers (DesignPanel, McpControl) get it without changing.
THE VERSION BUMP IS THE IMPORTANT HALF. The task was specified with "do not
change the recipe version" — that was wrong, and the rule is written in the
header three lines above the constant: bump whenever save/load gains a field.
deserialize_recipe() gates on v == VERSION and then reads a FLAT symmetric field
list. A v3 blob under a v3 build that has grown two fields passes the gate and
reads two ints past the end of every connector, into the next feature's bytes.
That is silent corruption of a saved project, which is worse than any load error.
Now v4, and v3 gets the existing clean refusal.
cad_recipe_v3.bin is KEPT, unregenerated, with a test asserting it is refused and
that nothing half-read is left behind. It is the only artefact that can prove the
gate works, because it was written by an older build — regenerating it with
today's code would destroy the evidence, which the test says in as many words.
Suite 163 -> 167 cases, 2248 -> 2277 assertions, green. Fixture v4 34928 bytes.
snaporca-kqih.
Two tests that separate a hypothesis nobody had tested. The socket showed four
chamfers on a filleted rim removing 29.6 / 20.0 / 10.3 / 7.5 mm3, falling
steadily. That could be the chamfer maths degenerating on a filleted rim, or it
could be how the driver captured its edge ids. Those have completely different
fixes, so the first job was to find out which.
dressup_edge is a global index into TopExp::MapShapes(shape, TopAbs_EDGE),
resolved against the body AS IT STANDS at that feature's position, and every
dress-up rewrites that map. So the two usage patterns are:
ids re-read after each chamfer: 0.400, 0.397, 0.397, 0.395 mm3 (max/min 1.01)
four ids captured up-front: 0.400, 0.008, 0.397, 0.280 mm3 (max/min ~48)
The kernel chamfers uniformly when handed a fresh id. It degrades only when
handed ids snapshot against an earlier shape — and the second chamfer's stale id
landed on a nearly-consumed edge and cut two percent of what was asked. That is
the accumulating-drift signature the socket showed.
Conclusion: driver artefact. apply_chamfer and OCCT are not at fault.
The part that makes this worth a test rather than a note: IT DOES NOT THROW.
ok=1, error empty. A stale id still resolves to a valid edge — just the wrong
one — so nothing anywhere reports it. Silent wrong geometry, which is the class
this project does not tolerate, reachable by any caller that reads the scene once
and then issues several dress-ups.
Test 2 asserts the non-uniformity as CURRENT BEHAVIOUR and says so in the code:
it documents a defect, it does not bless one. When the driver contract is fixed
it should be rewritten, not deleted.
Suite 161 -> 163 cases, 2217 -> 2248 assertions, green. Tests only, no
production code. snaporca-rgbj.
These were the last tools from the charter audit with no handle at all, and the
issue filed against them offered three options, all of which changed the tool.
Reading on_add_surface_offset() dissolved the question instead.
The premise was that a distance handle needs a frame, a sheet body has no single
normal, and therefore the tool must start demanding a face. But the face was
never needed for the OPERATION — only for the ARROW. Both tools still offset or
thicken the entire sheet named in the combo. The picked face only says where to
stand the handle.
So the arrow appears whenever a face of that sheet is under selection, and its
absence costs nothing: the card alone works exactly as before. Purely additive —
no existing flow changes, and there is no new precondition for the user to learn.
That is strictly better than any of (a) anchor on the first face and be wrong on
a curved sheet, (b) sample a normal at the bbox centre and be arbitrary on a
folded one, or (c) require a face pick and change what the tool demands.
The arrow is refused when the picked face belongs to a DIFFERENT body than the
sheet in the combo. An arrow standing on one body while the tool acts on another
would name the wrong thing, which is worse than no arrow.
ThickenSurface was not on the audit's list — it is a distinct tool from Thicken,
with its own card and its own sheet-body combo, and it has exactly the same
shape. Fixing one and not the other would have left the same gap under a
different name.
Reviewed and compiled (libslic3r_gui, RC=0); not exercised. snaporca-9fel.
detect_mate_conflicts() has been filling m_doc.mate_conflicts on every recompute
since the kernel half landed, and nothing read it. The diagnostics existed and
were invisible — a conflicting assembly looked exactly like a working one.
The tree row is where they go, because the tree is where the user is already
looking for which feature to change. Three states, in precedence order:
disabled -> dim. A SUPPRESSED mate is the user's answer to a conflict, so it
must read as suppressed rather than keep shouting about it.
conflict -> warn.
otherwise -> normal.
Selecting a marked row puts the reason on the status line — "Mate3 already
positions Body 2", the cycle, the self-mate — and names the eye as the way to
suppress it. A message that describes a problem with no action is a message that
gets ignored; the action here is already one click away on the row just selected.
Deliberately NOT a modal, and deliberately not treated as a document error. The
document still evaluates with a conflict present: the mate graph merely has more
than one answer for a body, and which one wins is the thing the user needs to
see. Blocking the loop to say so would interrupt without helping.
The dimming of non-involved bodies from the original UX proposal is still not
implemented, on purpose: under transform composition a failure mid-chain
propagates, so "not involved" is not a well-defined set, and dimming the wrong
bodies would hide the context needed to understand the conflict.
Reviewed and compiled (libslic3r_gui, RC=0); not exercised. snaporca-bioq.
Two defects found by auditing the body-focus x-ray path, which shipped compiled
but never exercised. Neither is reachable from the happy path its test plan
walks, which is why compiling it proved nothing.
1. A STALE FOCUS KILLED THE VIEWPORT. The focus is a body INDEX held by the panel
across recomputes, so it outlives the body it names: delete a body and the
stored index can point past the end. body_pickable() then rejected EVERY body,
because none of them equals an index that no longer exists — a viewport that
silently accepts no clicks at all, with nothing on screen saying why. Out of
range now means no restriction. Fail open, never dead.
2. THE COMBO AND THE FOCUS COULD DISAGREE. refresh_cs_body_choice() rebuilds the
Body combo and, when the body list shrank, silently reset the selection to
"(all)" — while the viewport stayed focused on the old index. Every other body
kept its 25% alpha and picking stayed restricted to a body that might be gone.
That is the exact mirror of the open_tool ordering bug this feature already
fixed once: that one showed "Body N" over an opaque scene, this one shows
"(all)" over a dimmed one. They are one state and are now written together.
Guarded on CoordSys being the active tool, since it is the only card that owns
this focus. In the edit path the function runs BEFORE open_tool with the
previous tool still active, so the guard is false and the caller's explicit
set_xray_focus still wins.
Also confirmed while reading, since the header asserts it: set_solid_pick() does
NOT touch m_pick_only_body, so the focus really does survive the mesh feed. That
claim now has a check behind it rather than a comment.
Reviewed and compiled (libslic3r_gui, RC=0); not exercised. snaporca-bgvk.
