The Filament Track Switch (H2-series accessory, product code O2L-FTS) feeds
every AMS to both extruders through a two-track switch. Port full support
across the device layer, project config, and GUI.
Device / config:
- Model the switch-aware AMS binding (the set of extruders an AMS can feed
and which input track A/B feeds it), switch readiness, the O2L-FTS firmware
module, and the fun2 capability bit for checking a slice against installed
hardware.
- Register has_filament_switcher and enable_filament_dynamic_map as project
config that persists with the project and restores from a saved 3mf, and
force both back to false on every project/printer/CLI load path. Live
device sync is the only thing that sets them true.
GUI:
- Sidebar sync activates the switch from live device state, attributes each
AMS to the extruder its input track feeds, shows a floating status icon
(ready / not-calibrated), and surfaces a one-time tip / not-calibrated
warning.
- Send dialog gains a non-blocking slice-vs-hardware mismatch warning and a
blocking error when a slice needs dynamic nozzle mapping but the switch is
missing or not set up.
- AMS load/unload guards, AMS-view routing glyph + un-calibrated banner +
hidden external-spool road, and mapping-popup external-spool lockout.
- Filament pickers collapse the per-extruder split into a single deduplicated
"AMS filaments" group with a smart-assign toggle when the switch is ready.
- Firmware-upgrade panel lists the O2L-FTS accessory and its version.
- Device-provided filament-change steps (ams.cfs) drive the change-step
display when firmware sends them, including the three switch steps.
- "Load current filament" asks which extruder to feed via a
FeedDirectionDialog when the switch is calibrated.
Inert without the accessory: every path is gated on the switch being
installed (MQTT aux bit 29, default off) or ready, both project flags default
false, and the per-extruder AMS attribution is byte-identical, so AMS state,
the send/load UI, and sliced g-code are unchanged for every printer that does
not report a Filament Track Switch.
Multi-nozzle sync widget, AMS rack-nozzle mapping popup, calibration rework, send-dialog nozzle mapping and extruder-count UI. Includes the fix to persist the AMS sync badge on filament cards (H2C/A2L and direct-sync printers).
Nozzle rack data model and device-tab panel, multi-nozzle sync, per-nozzle filament blacklist, and print-dispatch nozzle mapping (DevNozzleMappingCtrl V0/V1).
* fix: isolate calibration temp paths per user
The calibration temp files under <temp>/calib were file-scope statics
initialized before set_temporary_dir() runs at startup, so they kept
using the shared system temp root and missed the per-user isolation
added in #14607. On Linux every account shares /tmp, so the first user
to calibrate owns /tmp/calib and later users fail to write there, the
same cross-user collision #14607 fixed for model backups, STEP import,
and part skip.
Build the paths lazily from temporary_dir() instead, through a
calib_temp_dir() accessor and a calib_temp_file() join helper. The base
becomes <temp>/orcaslicer_<uid>/calib on Linux and is unchanged on
Windows, where the temp dir is already per user.
Also make StoreParams::path a std::string rather than a non-owning
const char*. The calibration code had to keep a std::string alive
solely to feed that pointer, and the field was uninitialized by
default; owning the string removes the lifetime hazard for all three
callers and makes the entry guard a reliable empty() check. Confined to
the 3mf project exporter (three callers, two internal reads); no
on-disk, format, or ABI impact.
Follows up on #14607 per @Noisyfox's review suggestion.
Replaces the plugin-only set_slices/set_fill_surfaces/set_lslices mutators with a
faithful, mutable binding of the core geometry types, so a plugin edits the slicing
graph through the same object model the C++ code uses.
- Point, Polygon, ExPolygon, Surface and SurfaceCollection gain constructors,
writable accessors (contour/holes, set/append/clear, filter_by_type), transforms
(rotate/scale/translate), boolean ops and offset. Polygon exposes a zero-copy
writable numpy view via a make_writable_rows helper.
- LayerRegion.slices/fill_surfaces stay read-only refs but are now live,
in-place-editable SurfaceCollections; Layer.make_slices() re-derives the islands
and refreshes lslice bounding boxes.
- Rewrites the Inset and Twistify samples on the new API (in-place ExPolygon
transforms, ExPolygon.offset, SurfaceCollection.set), dropping their numpy
dependency; each touched layer calls make_slices() so downstream steps see the
edited footprint. Adds tests covering in-place edits through a live collection.
BREAKING CHANGE: set_slices/set_fill_surfaces/set_lslices and the internal
parse_expolygon(_list)/surfaces_from_py helpers are removed. Plugins mutate through
the class API (SurfaceCollection.set/append/clear, Polygon.set_points/append,
ExPolygon.set_holes) instead.
* Support Painting: add Vertical/Horizontal axis-lock checkboxes
Adds the Vertical and Horizontal axis-lock checkboxes to the Support
Painting gizmo, matching the UI in the MMU Segmentation and Seam
Painter gizmos. The underlying constraint logic has lived in
GLGizmoPainterBase since #2424 and already applies to any
ToolType::BRUSH action — the Support gizmo was the only painter
without the UI to enable it.
The Circle and Sphere brush arms are consolidated into a single
"if (Circle || Sphere)" block matching the structure of
GLGizmoMmuSegmentation::on_render_input_window, eliminating
duplicate cursor-radius and axis-lock UI code.
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* Support Painting: keep Circle/Sphere as separate tool arms per review
Reviewer requested keeping a separate condition per tool for future
extensibility rather than merging Circle and Sphere into one branch.
This restores the upstream Circle/Sphere arm structure and adds the
Vertical/Horizontal axis-lock options to each arm, making the change
purely additive over upstream.
Co-Authored-By: Claude Opus 4.8 (1M context) <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Brings in the Plugins dialog as-you-type search with fuzzy match highlighting
and clickable column-header sorting (name, version, source, status) — PRs
#14610 and #14611.
Adds PluginHostSlicing, which registers the print-graph data model (Print,
PrintObject, Layer, LayerRegion, Surface, ExPolygon, extrusions, ...) into the
orca.host submodule in the same raw-class style as PluginHostApi's Model/Preset
graph, with shared helpers in PluginBindingUtils. SlicingPipelinePluginCapability
is trimmed to the capability surface (the standalone SlicingNumpy helper is folded
away). Adds the Twistify example plugin next to Inset and broadens the binding,
hook, and plugin-install tests.
Port from BambuStudio commit c8f70c6ca. Shows a warning when AMS
is actively drying during print job preparation, alerting users that
the drying temperature will be lowered during printing.
Three-page wizard: main status/control page, guide page with
filament tray status, and progress page. Supports N3F and N3S AMS types.
Co-Authored-By: Claude <noreply@anthropic.com>
Replace the toolbar sort dropdown with sortable Name/Source/Status column
headers that cycle ascending, descending, then clear. Add a Source column
and a PluginSortKey::None baseline for the cleared state. The whole header
cell is the click target and the sort triangle snaps in without a fade.
fix(gui): avoid null-pointer UB in create_scaled_bitmap with win == nullptr
create_scaled_bitmap() documents that win may be nullptr, but called
win->FromDIP() on it. Calling a member function through a null pointer
is undefined behavior: clang assumes `this` is non-null and deletes the
subsequent `win ?` null check added in #13117, turning the fallback
branch into an unconditional virtual call through a null vtable.
This crashed LLVM/clang-cl builds at startup (access violation reading
0x0 in BBLTopbar creation); MSVC builds were unaffected by luck.
Use the static, null-safe wxWindow::FromDIP(x, win) overload instead,
which falls back to the primary display DPI. Behavior is unchanged for
non-null windows.
The 409 conflict notification, the force-push confirmation dialog, and the payload-too-large (413) dialog now name the affected preset. The name was already parsed from the conflict body but never surfaced. The account-level preset-limit message stays generic since it isn't about one specific preset.
SoftFever