* fixes: %g directive writing between 1 and 13 bytes into a region of size between 6 and 18 [-Wformat-overflow=]
* fixes: %5s directive writing between 5 and 63 bytes into a region of size 58 [-Wformat-overflow=]
* fixes: catching polymorphic type by value [-Wcatch-value=]
* fixes: [-Wcomment]; removes whitespaces
* increases buffer size from 71B to 90B to avoid potential ovfl.
# Description
On Klipper the wipe tower's motion-queue synchronization silently did
nothing. Klipper acts on commands the moment it parses them, and its
`G4` reads only `P` in milliseconds — it ignores `S` — so the `G4 S0`
the tower used to flush the queue before a temperature change never
synchronized anything, and the cooling delay after a filament's cooling
moves passed instantly instead of waiting. The tower now emits `M400`
for the flush and `G4 P<ms>` for the dwell when the flavor is Klipper.
Only `gcode_flavor = klipper` is affected; G-code for every other flavor
is byte-identical, so no shipped profile or existing project file
changes.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The wipe tower's "Delay after unloading" never happened on Klipper. It was
emitted as G4 S<seconds>, and Klipper's G4 reads only the P parameter, in
milliseconds, so the pause was silently skipped. The option now produces a
dwell Klipper actually performs.
Also corrects the planner flush rationale, which cited an extruder position
reset that Klipper resolves at parse time and does not need synchronized, and
adds end-to-end coverage that slices a two-filament print and checks the
emitted wipe tower G-code on both a Klipper and a non-Klipper flavor.
No change to any other firmware flavor's output, and no shipped profile sets a
non-zero delay, so no shipped profile's output moves either.
The wipe tower emitted G4 S0 to make the firmware finish its queued moves
before commands that must not take effect early. Klipper's G4 reads only the
P parameter, so that flush never happened there and a temperature change could
land seconds ahead of the moves it was meant to follow. Klipper now gets M400
instead, through one helper shared by both wipe tower implementations.
No change to any other firmware flavor's output, so no shipped profile or saved
project is affected.
* update snapmaker profiles. largely ported for Snapmaker Orca fork
* update prime volume
* set precise_outer_wall to 1
* Update per-material multi-tool ramming to the filament library
* Add per-filament overrides for toolchange retraction
* Set toolchange retraction per filament for Snapmaker U1
* set default support type to tree
* format snapmaker profiles
The linear approximation used a heuristic segment count clamped to 4..16, so the
lift ran as a coarse polygon. Every vertex is a direction change large enough to
hit the firmware's jerk limit, forcing a decelerate/accelerate at each corner —
the lift micro-stutters instead of running at speed. The segment count now comes
from the chord deviation against the slicing resolution, reusing
Geometry::ArcWelder::arc_discretization_steps, which keeps the turn at each
vertex shallow enough for the firmware to carry speed through the whole move.
Points are emitted through GCodeG1Formatter so they carry the same quantization
as the rest of the G-code, and the move comment now trails the feedrate line to
match _travel_to_z and the G2/G3 branch. No change when arc fitting is enabled.
* fix: make the error dialog caret point at the character it's blaming
Custom G-code parse errors print the offending line with a '^' under the
character that broke, positioned with spaces so it only lines up in a
fixed-width font. Since v2.3.2 these dialogs rendered entirely in the
proportional UI font, so the caret drifted left of its column and landed
on unrelated text.
Render only the code excerpts (the offending source line and its caret) in
the fixed-width face, leaving the surrounding prose in the UI font, and
reserve the horizontal scrollbar's height so a long line does not clip.
Rename the flag to has_code_excerpts to match what it now means.
Fixes#14869
* refactor(GUI): use <code> instead of <tt> for error excerpts
wxHTML maps <tt>, <code>, <kbd> and <samp> to the same fixed-width
handler, so this renders identically. <code> is the non-deprecated
tag and matches what the original code used.
* fix(GUI): align the error caret with real spaces, not
The caret line was padded with so its spaces would survive inline
HTML. wxHTML measures every glyph by its font extent, so where the fixed
font lacks a U+00A0 glyph the fallback renders it about twice as wide, and
the all- caret line outran the source, drifting the ^ to the right.
Wrap the excerpts in a small <excerpt> tag, registered on the dialog's own
parser, that switches on wxHTML literal-whitespace mode so the caret uses
real spaces that match the source column in any font. It sits inside <code>
for the fixed face; <pre> would do both but forces a blank line above it.
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Replace per-printer auto-activation
(is_current_printer_agent_plugin)
with a global experimental AppConfig
toggle, default off: legacy
print-host behavior is unchanged
until the user opts in. The toggle
drives device-tab routing, print
button defaults, connect-button
visibility and sidebar layout, and
dedups machine-select dialog opens.
set_live_printer_agent centralizes
the swap: deselect the machine,
clear stale sidebar state and the
previous agent's Other Devices, then
install the new agent (or null when
its provider vanished). Plugin
load/unload callbacks refresh the
dropdown and re-run agent selection.
load_last_machine no longer falls
back to the first available machine.
A dedicated PrinterAgentChoice field
reads rows straight from the live
agent registry and stores the agent
id string, replacing the fake-coEnum
index mapping. The field moves to
TabPrinter and registers with the
searcher so UnsavedChanges renders
it; the PhysicalPrinterDialog copy
and its update hook are removed
(#125). switch_printer_agent now
resolves ids via
resolve_printer_agent_id.
test(libslic3r): replace the disabled convex_hull_2d test, closing #11269
The last "failing libslic3r test" from #11269 was the disabled
SCENARIO("2D convex hull of sinking object", "[3mf][.]") in test_3mf.cpp.
It checked ModelObject::convex_hull_2d for a sinking object against
PrusaSlicer's reference hull, but Orca's convex_hull_2d does not clip
geometry below the bed the way PrusaSlicer's its_convex_hull_2d_above does,
so the reference never matched. The test also wrote a debug mesh to a
hardcoded /tmp path and its comparison loop was inverted.
Remove it and add tests/libslic3r/test_model.cpp characterizing
convex_hull_2d on non-sinking transforms (identity and scale+offset),
where the projected footprint is unambiguous. Homed in a Model test file
since it exercises ModelObject, not 3MF.
* Fix gizmo being closed after releasing mouse outside the gizmo floating window
The left up event of a drag started on the gizmo floating window (e.g.
selecting text in an input field) and released over the bed was treated
as a click on the plate, which deselected the objects and closed the
active gizmo. Add the ignore_left_up guard to the plate select branch,
matching the deselect branch above.
Co-Authored-By: Claude <noreply@anthropic.com>
* Fix Emboss gizmo being closed after releasing mouse outside its floating window
The Emboss gizmo has its own close-on-click-away handler
(on_mouse_change_selection) that was not protected against left up events
originating from ImGui windows, so the gizmo was still closed when a drag
started on its floating window (e.g. selecting text in the input field)
ended over the 3D scene. Expose the canvas's ignore_left_up state to
gizmos and skip the close check for such releases.
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
* imgui: Clamp mouse y-coordinate in multi-line click/drag to text bounds
In single-line mode, click and drag already clamped y to the line's
y-coordinate so the cursor would continue to follow the x-position when
the mouse went off the top or bottom of the text. Multi-line mode did
not clamp, so stb_text_locate_coord() would return 0 (above) or n
(below), snapping the cursor to the very start or end of text and
ignoring the x-coordinate entirely.
Now both modes walk the row layout to compute the top of the first row
(y_min) and bottom of the last row (y_max, minus half a line height to
add tolerance for rounding), then clamp y to that range before passing
it to stb_text_locate_coord(). This means dragging or clicking above
the text now places the cursor on the first line at the x-coordinate,
and dragging/clicking below places it on the last line at the
x-coordinate, matching the single-line precedent.
* Fix issue that cursor cannot be placed at the last empty line
On Linux the bundled CPython silently links the system OpenSSL instead of
the one built in deps/, and the dependency build then fails:
install: cannot stat 'Modules/_ssl.cpython-312-x86_64-linux-gnu.so':
No such file or directory
The chain:
* OpenSSL's linux-x86_64 target sets multilib=64, so 'make install_sw'
installs the static libs to <prefix>/lib64 while every other dependency
in the prefix uses <prefix>/lib.
* CPython's --with-openssl=<dir> only ever emits -L<dir>/lib. It does not
look in lib64, so -lssl resolves to the system OpenSSL.
* gcc -shared does not error on unresolved symbols, so the link appears to
succeed. _ssl.c was compiled against the bundled 1.1.1w headers, which
map SSL_get1_peer_certificate onto the pre-3.0 SSL_get_peer_certificate
-- a symbol OpenSSL 3.x removed. The module then fails to import:
_ssl failed to import: undefined symbol: SSL_get_peer_certificate
Could not build the ssl module!
* With no _ssl built, 'make install' cannot stat it and the build stops.
Passing --libdir=lib keeps the prefix single-layout, so CPython's -L<dir>/lib
finds the bundled static libraries and links against the headers it was
compiled with.
CMake-based dependencies were unaffected throughout, because CMake's
FindOpenSSL searches lib64 on its own; only CPython's autoconf path is
sensitive to this.
Affects any distribution where OpenSSL selects the lib64 layout, which is the
Fedora, openSUSE and Arch families. Debian and Ubuntu are unaffected, which is
why CI has not seen it.
Verified on Arch (GCC 16.1.1, CMake 4.4.2): the dependency build completes and
the bundled interpreter reports the bundled OpenSSL rather than the system one:
$ deps/build/OrcaSlicer_dep/usr/local/libpython/bin/python3.12 \
-c 'import ssl; print(ssl.OPENSSL_VERSION)'
OpenSSL 1.1.1w 11 Sep 2023
Not verified on macOS or Windows. The flag is accepted by OpenSSL's Configure
on all platforms and Darwin targets do not set multilib, so it should be a
no-op there, but CI is the check.
* Remove titlebar from splash screen on Wayland
* Broadly check for window decorations and added explanatory description
* Fixed hiding title bar on Wayland for all desktop environments
* Update format
---------
Co-authored-by: noisyfox <timemanager.rick@gmail.com>
* fixes: may be used uninitialized [-Wmaybe-uninitialized]
* fixes: arc_len_next may be used uninitialized [-Wmaybe-uninitialized]
* review result: reverts {} initializer with = to keep code style consistent
LayerResult's second field is typed size_t, so std::numeric_limits::max
should also use size_t and not something related to coordinates for the
layer_id.
# Description
On multi-tool printers using the type 2 wipe tower, the travel to the
tower ignored the configured Z hop type and always used a plain vertical
hop, so the nozzle rose in place over the part and oozed instead of
lifting away with the travel. It now follows the filament's Z hop
setting, matching what the type 1 tower already does.
Only toolchange travels to a type 2 tower change. Normal Lift and z_hop
= 0 are unaffected, and no extrusion moves change in any mode.
# Screenshots/Recordings/Graphs
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The tower travel took retract()'s default vertical Z hop instead of the
configured one, so the nozzle rose in place over the part and oozed
rather than departing with the travel. Pass the filament's z_hop_types
through, mapping Auto to a spiral lift as append_tcr does.
* Sync WipeTower from BambuStudio(through ca1881761)
* Fix post-slice self-invalidation on custom multi-extruder printers
* Complete the rib wipe tower port in WipeTower2
The rib tower is now always square (prime_tower_width is ignored, as the
GUI already implies), carries the rib origin offset like the BBL tower so
the rib tips sit inside the configured position, clamps the rib length to
the tower diagonal, and extends the ribs for short towers.
* Use the squared rib tower size in arrange estimates
estimate_wipe_tower_polygon reserved the arrange footprint and clamped the
tower X position with the raw prime_tower_width, under-reserving space
whenever the rib wall squares the tower to a different width.
* Print the WipeTower2 shell with a non-support, non-soluble filament
Like the BBL tower: the layer's sparse infill, wall, and brim go to the
first toolchange to a non-support/non-soluble filament, or are printed
with the incoming filament before any toolchange. The minimal-purge
clamp now also covers toolchanges that get no finish-layer saving.
Output is unchanged when no support/soluble filament is used.
* Port the skip-points gap wall to WipeTower2
prime_tower_skip_points was stubbed for Type2 towers: the wall call
hard-coded skip_points=false, the gap cutter received an empty vector,
and append_tcr2 never routed the entry travel. Now the toolchange entry
positions are precomputed from the finalized plan, the wall is cut open
at each entry, and the entry travel approaches around the tower bounding
box through the opening when it starts outside the tower. The geometry
helpers are re-synced with the BBL versions (add_extra_point guards,
per-point side selection). The cone wall keeps its separate path, where
the option stays inert.
Behavior change: non-BBL towers now honor the (default-on) checkbox with
gap walls and routed entries; with the option off the output is
unchanged, and the BBL tower path is untouched.
* Route the in-place toolchange tower entry through the skip-point gap
On multi-tool printers without ramming the tool changes away from the
tower and the entry travel is the tcr's own positioning move, which went
straight across the printed wall. Append the avoid-perimeter path to the
change-filament gcode instead, so the head approaches around the tower
and enters through the wall opening (append_tcr parity).
* Iron the purge start out through the skip-point gap in WipeTower2
Port the BBL tower's entry line ironing: extrude the first 3 mm of the
purge, retract, drag the nozzle 1.5x back out through the wall gap at
F600, creep back at F240 and unretract, so the toolchange start blob
ends up in the gap instead of on the wall. Fires only when the purge
starts at the left-edge entry heading right (in-place toolchangers);
SEMM ram/cooling wipes start mid-box and the priming line has no wall,
so both keep their previous output.
* Reserve WipeTower2 toolchange depth to match the printed purge
The planner reserved ramming rows gated only on enable_filament_ramming and
sized them with the SEMM 0.25s time step, while toolchange_Unload rams on
(semm && enable_filament_ramming) || filament_multitool_ramming with the
multitool time step. Disabling multitool ramming therefore left ~3 unprinted
rows per toolchange as blank bands in the tower. Without ramming the first
wipe line also needs reserved depth of its own (it no longer rides the last
ramming row), plus the y_step/2 offset the wipe start inherits from the
ramming start position - otherwise the tightened boxes truncate the ordered
purge at the box edge.
* Tile WipeTower2 purge rows contiguously across toolchange blocks
Without ramming, each purge block reserved one wipe pitch more than its
rows occupy (ceil+1 rounding plus the ram-geometry start offset), and the
wipe began a full pitch inside the block, leaving a blank band of exactly
two pitches between adjacent blocks. Plan the block as whole wipe rows,
start the first row so the row lattice continues across the block
boundary, and fill the reserved box instead of stopping at the ordered
volume, mirroring how the BBL WipeTower keeps planned depth identical to
printed rows. Ram-printing toolchanges (SEMM with ramming enabled,
multitool ramming) are unchanged.
* Scrub the WipeTower2 toolchange entry with the BBL flat-ironing spiral
The entry scrub now matches the BBL tower's toolchange_wipe_new sequence:
after the ironing drag the retracted nozzle runs a dry expanding-square
spiral centred on the wall-gap entry point before resuming the purge row.
The spiral runs whenever the gap wall is on (disable per filament via
filament_tower_ironing_area = 0); WipeTower2 no longer reads
prime_tower_flat_ironing.
* Restart the WipeTower2 wipe at the box boundary after multitool ramming
With the gap wall on a multi-tool printer, quantize the ram band up to its
whole reserved rows (as the BBL tower does for the old-tool purge) and start
CP TOOLCHANGE WIPE at the left-edge boundary on a fresh row below it instead
of continuing from wherever the ram serpentine ended. The entry scrub then
runs at the wall gap on ram toolchanges too, and the wipe box is whole rows,
so it is filled completely like the no-ram case. SEMM and skip-points-off
behavior is unchanged.
* Move the WipeTower2 wall gap to the wipe start row for ram toolchanges
* code cleanup
* Potential fix for pull request finding
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
* fix typo
---------
Co-authored-by: Copilot Autofix powered by AI <175728472+Copilot@users.noreply.github.com>
# Description
<!--
> Please provide a summary of the changes made in this PR. Include
details such as:
> * What issue does this PR address or fix?
> * What new features or enhancements does this PR introduce?
> * Are there any breaking changes or dependencies that need to be
considered?
-->
This PR updates OTA vendor profile handling and fixes a Windows-only
startup race that could terminate OrcaSlicer silently.
## Changes
- Correct vendor profile version comparison logic.
- Trigger vendor profile synchronization after the startup printer
preset is restored.
- Remove duplicate vendor synchronization from the general startup
updater.
- Replace global temporary archive cleanup with targeted per-vendor
cleanup.
- Add updater-thread exception handling to prevent uncaught filesystem
errors from terminating the process.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
