# Description
On Klipper the wipe tower's motion-queue synchronization silently did
nothing. Klipper acts on commands the moment it parses them, and its
`G4` reads only `P` in milliseconds — it ignores `S` — so the `G4 S0`
the tower used to flush the queue before a temperature change never
synchronized anything, and the cooling delay after a filament's cooling
moves passed instantly instead of waiting. The tower now emits `M400`
for the flush and `G4 P<ms>` for the dwell when the flavor is Klipper.
Only `gcode_flavor = klipper` is affected; G-code for every other flavor
is byte-identical, so no shipped profile or existing project file
changes.
# Screenshots/Recordings/Graphs
<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->
## Tests
<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->
<!--
> A guide for users on how to download the artifacts from this PR.
-->
[How to Download Pull Requests Artifacts for
Testing](https://www.orcaslicer.com/wiki/how_to_download_pr_artifacts)
The wipe tower's "Delay after unloading" never happened on Klipper. It was
emitted as G4 S<seconds>, and Klipper's G4 reads only the P parameter, in
milliseconds, so the pause was silently skipped. The option now produces a
dwell Klipper actually performs.
Also corrects the planner flush rationale, which cited an extruder position
reset that Klipper resolves at parse time and does not need synchronized, and
adds end-to-end coverage that slices a two-filament print and checks the
emitted wipe tower G-code on both a Klipper and a non-Klipper flavor.
No change to any other firmware flavor's output, and no shipped profile sets a
non-zero delay, so no shipped profile's output moves either.
The wipe tower emitted G4 S0 to make the firmware finish its queued moves
before commands that must not take effect early. Klipper's G4 reads only the
P parameter, so that flush never happened there and a temperature change could
land seconds ahead of the moves it was meant to follow. Klipper now gets M400
instead, through one helper shared by both wipe tower implementations.
No change to any other firmware flavor's output, so no shipped profile or saved
project is affected.
* update snapmaker profiles. largely ported for Snapmaker Orca fork
* update prime volume
* set precise_outer_wall to 1
* Update per-material multi-tool ramming to the filament library
* Add per-filament overrides for toolchange retraction
* Set toolchange retraction per filament for Snapmaker U1
* set default support type to tree
* format snapmaker profiles
The linear approximation used a heuristic segment count clamped to 4..16, so the
lift ran as a coarse polygon. Every vertex is a direction change large enough to
hit the firmware's jerk limit, forcing a decelerate/accelerate at each corner —
the lift micro-stutters instead of running at speed. The segment count now comes
from the chord deviation against the slicing resolution, reusing
Geometry::ArcWelder::arc_discretization_steps, which keeps the turn at each
vertex shallow enough for the firmware to carry speed through the whole move.
Points are emitted through GCodeG1Formatter so they carry the same quantization
as the rest of the G-code, and the move comment now trails the feedrate line to
match _travel_to_z and the G2/G3 branch. No change when arc fitting is enabled.
* fix: make the error dialog caret point at the character it's blaming
Custom G-code parse errors print the offending line with a '^' under the
character that broke, positioned with spaces so it only lines up in a
fixed-width font. Since v2.3.2 these dialogs rendered entirely in the
proportional UI font, so the caret drifted left of its column and landed
on unrelated text.
Render only the code excerpts (the offending source line and its caret) in
the fixed-width face, leaving the surrounding prose in the UI font, and
reserve the horizontal scrollbar's height so a long line does not clip.
Rename the flag to has_code_excerpts to match what it now means.
Fixes#14869
* refactor(GUI): use <code> instead of <tt> for error excerpts
wxHTML maps <tt>, <code>, <kbd> and <samp> to the same fixed-width
handler, so this renders identically. <code> is the non-deprecated
tag and matches what the original code used.
* fix(GUI): align the error caret with real spaces, not
The caret line was padded with so its spaces would survive inline
HTML. wxHTML measures every glyph by its font extent, so where the fixed
font lacks a U+00A0 glyph the fallback renders it about twice as wide, and
the all- caret line outran the source, drifting the ^ to the right.
Wrap the excerpts in a small <excerpt> tag, registered on the dialog's own
parser, that switches on wxHTML literal-whitespace mode so the caret uses
real spaces that match the source column in any font. It sits inside <code>
for the fixed face; <pre> would do both but forces a blank line above it.
---------
Co-authored-by: Noisyfox <timemanager.rick@gmail.com>
Replace per-printer auto-activation
(is_current_printer_agent_plugin)
with a global experimental AppConfig
toggle, default off: legacy
print-host behavior is unchanged
until the user opts in. The toggle
drives device-tab routing, print
button defaults, connect-button
visibility and sidebar layout, and
dedups machine-select dialog opens.
set_live_printer_agent centralizes
the swap: deselect the machine,
clear stale sidebar state and the
previous agent's Other Devices, then
install the new agent (or null when
its provider vanished). Plugin
load/unload callbacks refresh the
dropdown and re-run agent selection.
load_last_machine no longer falls
back to the first available machine.
A dedicated PrinterAgentChoice field
reads rows straight from the live
agent registry and stores the agent
id string, replacing the fake-coEnum
index mapping. The field moves to
TabPrinter and registers with the
searcher so UnsavedChanges renders
it; the PhysicalPrinterDialog copy
and its update hook are removed
(#125). switch_printer_agent now
resolves ids via
resolve_printer_agent_id.
test(libslic3r): replace the disabled convex_hull_2d test, closing #11269
The last "failing libslic3r test" from #11269 was the disabled
SCENARIO("2D convex hull of sinking object", "[3mf][.]") in test_3mf.cpp.
It checked ModelObject::convex_hull_2d for a sinking object against
PrusaSlicer's reference hull, but Orca's convex_hull_2d does not clip
geometry below the bed the way PrusaSlicer's its_convex_hull_2d_above does,
so the reference never matched. The test also wrote a debug mesh to a
hardcoded /tmp path and its comparison loop was inverted.
Remove it and add tests/libslic3r/test_model.cpp characterizing
convex_hull_2d on non-sinking transforms (identity and scale+offset),
where the projected footprint is unambiguous. Homed in a Model test file
since it exercises ModelObject, not 3MF.
* Fix gizmo being closed after releasing mouse outside the gizmo floating window
The left up event of a drag started on the gizmo floating window (e.g.
selecting text in an input field) and released over the bed was treated
as a click on the plate, which deselected the objects and closed the
active gizmo. Add the ignore_left_up guard to the plate select branch,
matching the deselect branch above.
Co-Authored-By: Claude <noreply@anthropic.com>
* Fix Emboss gizmo being closed after releasing mouse outside its floating window
The Emboss gizmo has its own close-on-click-away handler
(on_mouse_change_selection) that was not protected against left up events
originating from ImGui windows, so the gizmo was still closed when a drag
started on its floating window (e.g. selecting text in the input field)
ended over the 3D scene. Expose the canvas's ignore_left_up state to
gizmos and skip the close check for such releases.
Co-Authored-By: Claude <noreply@anthropic.com>
---------
Co-authored-by: Claude <noreply@anthropic.com>
