Esc and Cancel now put the body back, and Confirm keeps the new position. A click off the
gizmo only moves the camera and no longer leaves the Move card and its buttons dead. Starting
another edit or a rebuild keeps the position, and undo is refused until the Move is confirmed
or cancelled.
The XY, XZ and YZ planes no longer cross through the bed. Each is a small square in its axis
colour, set off from the axes into the corner that faces the default front view, with its name
written in the plane. Dash-dot axes run between the squares and replace the bed's axis triad
while they show. Hovering a plane greys it and selecting one makes it solid, and picking a
solid face now clears a previously picked plane.
Grabbing an arrow anywhere along its length snapped the body's centre to that point as soon
as the mouse moved. The body now moves by how far the cursor travels from where the arrow
was grabbed, including when it is grabbed while looking straight down the axis.
The XY/XZ/YZ planes are cut along each other and drawn back to front, with
lines along every crossing, and their fills are strong enough for the order
to show. Before, they blended into one grey smear and were too pale to work with.
In the Design tab the button always swung the camera to the plate view and framed the whole
bed, whatever was selected: the tab's picks and sketches are neither the canvas's selection
nor its volumes. It now frames the selected faces, body, edges, vertex, sketch region or
sketch entities, and with nothing selected everything on show — the visible bodies, the
feature preview and the sketches — keeping the current view direction. An empty tab still
frames the bed as before.
The line started at a fixed inset scaled like the ImGui style, while the navigator and the
round canvas buttons scale with the monitor's DPI on Windows, so at 150% the buttons covered
its first words. It now starts past the edge the canvas reports for that corner.
Panning or orbiting with a right-drag no longer ends the polyline chain or drops
the point already placed. Only a right-click that doesn't move does. In the
Touchpad camera style, Alt+move and Shift+move now orbit and pan even while a
draw tool is armed.
The bodies now always draw over the preview on every face a feature leaves unchanged, for
all features. Since a hole's cut sits inside the body, the Hole preview now hides the
bodies and shows the result alone, as Fillet/Chamfer and Draft do.
The only use of Slic3r::create_thread in this file sits behind
!BBL_RELEASE_TO_PUBLIC && __WINDOWS__, so the include looked unused in
every configuration CI builds. Windows Debug and RelWithDebInfo builds
failed without it.
* Remove Unused Project Includes and Forward-Declare Where a Type Is Only Referenced
Generated with include-what-you-use and applied conservatively. Only OrcaSlicer's own headers, the ones under src/ and tests/, are removed or forward-declared; standard-library and third-party includes are left alone. An include is removed only when both the Release and the Debug configuration leave it unused, never from inside a conditional block, and never from a file with platform-specific blocks, which only gain includes. Files whose only use of a header sits behind a feature or debug macro (libvgcode's OpenGL ES and marker code, the ARACHNE/TESTS_EXPORT_SVGS debug output) keep their includes.
clonable_ptr.hpp gains #pragma once; it had no include guard and was only safe while Config.hpp was its sole includer.
* Remove Unused Project Includes From Files With Platform-Specific Code
A Linux include-what-you-use run cannot see the code inside _WIN32, __APPLE__ or __linux__ blocks, so its verdict is only taken where nothing the removed header declares, directly or through what it includes, is named inside those blocks. Removals also have to hold in both the Release and Debug configuration and never touch a line inside a conditional block.
* Restore the libslic3r Precompiled Header and Direct Includes Lost in the Platform Pass
The platform-file pass treated pchheader.hpp as an ordinary header and
emptied it, and left GUI_Preview.hpp and 14 other files relying on
headers they no longer reached directly.
* Restore MainFrame.hpp in ParamsDialog.cpp for the Windows-Only Reparent Call
* Include Headers That Files Reached Through Ones the Cleanup Removed
* Drop Includes Duplicated by the Cleanup or by Main's Own Additions
* Leave PreciseSeam.cpp as Main Has It After the Precise Seam Rework
The Design view drew sinking outlines by looking up its bodies in the
plate's model, reading past the end of an object's volumes once a body
was committed. The Design canvas no longer draws sinking outlines.
Commit to Plate now sends all visible bodies to Prepare as one object with a
part per body, so their relative placement survives. A dropdown beside the
button switches to Commit to Plate (as bodies), the previous one-object-per-body
behaviour, and the choice is remembered.
GLGizmoSlaSupports, GLGizmoHollow, GLGizmoFaceDetector, GLGizmoText and GLGizmoAdvancedCut were already left out of the build, and GLGizmos.hpp, the only header including some of them, had no includers. VoxelizeCSGMesh.hpp uses types that no longer exist, SLA/bicubic.h does not compile, and Utils/ProfileDescription.hpp is included nowhere. Their CMake and gettext source-list entries go with them.
Selections are drawn as opaque faces in the selection colour with a cased outline instead of a
translucent tint over the body, so they read on a body of any colour. Selecting a Feature tree
row lights the faces that feature made rather than its whole body, which also makes fillet and
chamfer rows highlight again.
Each Feature tree row now carries Edit, Show/hide and Delete, and each
Bodies row carries Move, Show/hide and Delete. These act on that row
instead of on the selection. The eye shows a closed eye when the item
is hidden. Every clickable icon in the sidebar now highlights on hover.
Rename and Color now come first in the right-click menu, as items of
their own instead of inside Modify. This applies wherever they appear,
whether opened from the viewport or from a Bodies row.
Clicking an already-selected row no longer starts a rename; use F2,
the row's right-click menu, or the Rename command.
Restore slicing progress after notification reset
Ensure the cleared slicing-progress controller is recreated before its initial state transition, and calculate the Daily Tips size before positioning the popup.
perf: skip estimating curled walls when nothing reads them
The curled extrusion estimate ran whenever a region had overhang speed on,
which is the default, but only the slowdown for curled perimeters reads the
curled lines it produces, and that slowdown is off by default. The step now
also requires a region with the slowdown on, and clears the curled lines
when it skips the estimate, so none are left from an earlier slice.
Also fixes stale fan commands due to the stale curled lines on the reused layers.
Every file that included STEP.hpp, directly or not, got namespace fs = boost::filesystem at global scope, and 29 sources and three headers relied on it without saying so. Headers now spell out boost::filesystem, and each source that uses fs declares the alias itself.
* Fix CLI Crashes on Malformed Project, Assemble List and No-Input Runs
Four CLI paths indexed vectors without checking their size and crashed
with SIGSEGV on malformed input:
- A project inherits_group whose length is not the filament count plus
the process and printer entries was split by position. It is now
ignored with a warning, as if the project had none.
- An assemble list object with an empty filaments list passed validation
and was then read at index 0. It is now rejected as a config error, as
is a negative filament id.
- --slice N --arrange 1 on a project without plate metadata read the
missing plate data. It now falls back to the plate's own filaments,
like the other plate data reads.
- --assemble with no input model built an object with no volumes. It is
now rejected as invalid parameters.
A tests/cli script covers each case through the binary, since all four
live inline in CLI::run().
* Move the Assemble List Parser into libslic3r
Behaviour-preserving move of the --load-assemble-list JSON parser and
its plate/object structs from the CLI into libslic3r/Format/AssembleList,
so the format can be unit tested. The parser returns its own
AssembleListResult and takes the plate limit as a parameter; CLI::run
maps the result to the same exit codes as before. Every validation rule
and log message is unchanged.
Adds Catch2 coverage of the valid layout and each validation rule.
* Keep the Process and Printer of an inherits_group of the Wrong Length
A project whose inherits_group did not have one entry per filament plus
the process and printer entries was loaded as if it had none. The CLI
then looked for system presets under the names of the user presets,
found none and refused to slice a project that slices on main.
The group is now read as before: the process first, the printer last
and the filaments in between, up to the filament count. A filament
without an entry counts as a system preset. A group with fewer than two
entries is still ignored. The warning stays.
Release builds install each vendor as its preset cache alone. The
read-only preset load the CLI uses to resolve an inheriting user preset
passed allow_cache = false to keep caches from being written, which
also stopped them from being read, so every vendor fell back to JSONs
that are not installed and the CLI failed.
The flag now only gates writing: a read-only load reads caches and
writes none. The filament library is also read from its cache whenever
that is all that is installed, so a vendor updated over the air still
resolves against it.
* Refresh a CLI Project's Filament Settings From Their System Presets
The CLI loads a project's printer and process settings as the GUI does,
taking every key the project does not list as changed from the current
system preset, but it kept the stored filament values. A project saved
before a profile update then sliced with old filament values on the
command line and with the current ones in the GUI.
Every project filament that no loaded filament replaces is now resolved
by its system preset name and fed to the filament merge the up-to-date
path already uses, which keeps the keys listed in
different_settings_to_system and maps per-variant values onto the
preset's variants. This covers a plain run, --uptodate without
--uptodate-filaments, and the slots --load-filaments leaves empty. The
merge tells refreshed entries from loaded ones per entry instead of by
the global loaded-filament count, and the entries are kept in slot
order. A project filament saved under a name the presets have since
split per nozzle is resolved through the name conversion the GUI uses,
which PresetBundle now exposes.
* Check the Project Refresh Test's Result Directly
Shellcheck SC2181: test the checker's exit status in the if instead of
reading $? afterwards.
After undo, redo, New Design, a project load, a delete or a reorder, a sketch
profile picked beforehand stayed selected even though it was gone. The
right-click menu then offered "Sketch profile" over an empty design with Create
greyed out. Those operations now clear the selection.
The Confirm button no longer stays greyed in a sketch session after a card whose
preview was invalid has been closed.
Delete and reorder now wait while a sketch or constrain session, the Text dialog,
an Insert placement or the move gizmo is open, instead of editing whichever
feature took its place in the list.
SoftFever