ws2_32 (Winsock2) and wsock32 (Winsock) are not supposed to be used in the same application.
boost::asio requires ws2_32, but wxWidgets uses wsock32.
Which gets used depends on the order they appear in the link command, as they both define the same symbols, but with different behaviour.
ws2_32 is backwards-compatible with wsock32, so wxWidgets won't be negatively affected by linking with the newer version, and prior to c228ab2da1, that's what happened.
That commit reordered how some libraries were passed to the linker, so swapped the order of these two, breaking mDNS and causing https://github.com/OrcaSlicer/OrcaSlicer/issues/13969
* Add test for Arachne duplicate wall segment detection
Add test cases that reproduce an issue where Arachne generates
duplicate/coinciding extrusion segments at certain min_bead_width settings.
Test configuration:
- Profile: 0.28mm Extra Draft @BBL X1C (0.4mm nozzle, 0.28mm layer)
- outer_wall_line_width: 0.42mm, inner_wall_line_width: 0.45mm
- wall_loops: 2, precise_outer_wall: enabled
- Test polygon: outer rectangle (0,0)-(20,20) with inner cutout (0.5,0.5)-(19.5,19.5)
This creates a 0.5mm wide frame around the perimeter.
Results:
- 50% min_bead_width (0.20mm): FAILS - detects 4 duplicate segments (all 4 sides)
- 60% min_bead_width (0.24mm): PASSES - no duplicates
At 50%, Arachne generates two separate closed loops that share all 4 edges
of the inner square. At 60%, Arachne generates a single closed loop.
SVG output is exported to /tmp/opencode/ for visual debugging.
* Fix Arachne duplicate extrusion caused by bead count mismatch
WideningBeadingStrategy::compute() used optimal_width (inner wall width)
to determine if a thin wall should produce a single bead. However,
getOptimalBeadCount() uses optimal_width_outer (outer wall width) via
RedistributeBeadingStrategy to decide the bead count.
This inconsistency caused situations where getOptimalBeadCount() returned
2 beads, but compute() produced only 1 bead at full thickness. The single
bead was then generated for both inner and outer contours, resulting in
duplicate extrusion paths.
Fix: Use getTransitionThickness(1) instead of optimal_width. This method
returns the exact threshold for the 1-to-2 bead transition, ensuring
consistency between bead count calculation and bead generation.
Reproduces with: 50% min_bead_width, 0.42mm outer wall, 0.45mm inner wall,
0.5mm polygon inset creating ~0.38mm wall thickness.
Fixes#13917
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Linux compositing - retain old code and make switchable via #if statement
* Make option settable via env variable/.desktop file
* undo accidental empty row delete
OrcaSlicer currently ships an "Octo/Klipper" host type that maps to the
OctoPrint REST endpoints (api/version, api/files/local). It works for
Klipper setups that run Moonraker with the OctoPrint-emulation plugin,
but native Moonraker — and Moonraker-compatible firmwares like the
Prusa-Firmware-Buddy buddy-klipper fork — speak a different shape:
distinct paths, JSON body for /printer/print/start, {"result":...}
envelope. There's no host type for that today.
Add a new Moonraker class deriving from PrintHost. Endpoints used,
matching the Moonraker spec:
- GET /server/info — connection test, reads
result.klippy_state
- GET /server/files/roots — storage-picker dropdown
(returns roots with 'w'
permission); gracefully
degrades if absent
- POST /server/files/upload (multipart) — upload (form fields:
file, root)
- POST /printer/print/start (json) — {"filename":"<path>"}; the
filename is whatever the
upload response returned
in result.item.path, so any
server-side rename
(collision suffix etc.) is
respected. JSON body is
built via property_tree
write_json so exotic
characters in the path are
properly escaped.
Auth: X-Api-Key header, only when printhost_apikey is non-empty
(Moonraker can be configured to require it but doesn't by default).
HTTP Basic / Digest are not part of the Moonraker spec and are not
sent.
Storage root is read from upload_data.storage with "gcodes" as the
fallback default, so the existing storage-picker plumbing in
PrintHostDialogs lights up automatically once enumerable roots are
returned.
UI: registers as the "Moonraker (Klipper)" entry under host_type;
selectable via the existing Physical Printer dialog (sidebar's
connection button on the printer card).
Verified against a Prusa-Firmware-Buddy buddy-klipper fork (firmware
identifies as moonraker_version "0.8.0-prusalink-shim"): /server/info
test, multipart upload to /server/files/upload, and JSON
/printer/print/start all work end-to-end. The existing "Octo/Klipper"
entry is left untouched so users currently relying on Moonraker's
OctoPrint-emulation plugin keep working.
* feat: double-click object list row to frame object in 3D view
Resolves#13800.
Extends the existing wxEVT_DATAVIEW_ITEM_ACTIVATED handler in
ObjectList::create_objects_ctrl() so that double-clicking an
object / part / instance row calls GLCanvas3D::zoom_to_selection().
This mirrors the existing "Fit camera to scene or selected object"
canvas button, exposed via a natural mouse trigger from the list.
The current view angle is preserved (Blender-style "Frame Selected").
Scope kept intentionally small:
- Object / Part / Instance rows -> zoom_to_selection().
- Filament-color column -> unchanged (still opens color editor).
- Plate rows -> unchanged (no-op).
- Inert in slice-preview mode via get_current_canvas3D(true).
Authored with assistance from Claude (Anthropic).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
* fix: no-op object-list double-click in slice-preview mode
Following up on #13800 / #13804. The original guard used
get_current_canvas3D(true)'s `exclude_preview` flag, expecting that to
return nullptr when the preview canvas is active. In fact the flag
falls through to the editor canvas as a default, so the handler was
still calling zoom_to_selection() on the editor canvas — and since the
camera is shared between the editor and preview canvases, the move
was visible in the preview view as the camera jumping to empty world
positions (sliced or excluded, sliced or not).
Replace the misnamed flag with an explicit is_preview_shown() guard
that returns early before any canvas lookup. Manually verified:
preview mode now ignores object-list double-clicks; prepare-mode
behavior unchanged.
Authored with assistance from Claude (Anthropic).
Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.7 <noreply@anthropic.com>
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Don't show unsupported presets in drop down list, since it's not useful
* Add option to show unsupported presets
* Explicitly set the default value to `false`
* update filament list without restart on preference change
---------
Co-authored-by: yw4z <ywsyildiz@gmail.com>
Since the wxWidgets 3.3 upgrade the Slice/Print split-button's transient
popup was dismissed the moment the cursor entered the gap between the
button and the menu, making "Print -> Export" impossible to select.
Anchor the menu flush against the button (with a 2 px overlap) instead of
6 px below it, removing the dead-zone the cursor had to cross.
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
* Preserve support base outline/fill order
Honor no_sort when emitting support toolpaths to keep outline-first order.
Group tree support base paths (including lightning) into per-area no_sort collections to prevent interleaving across islands.
Keep lightning layer lookup side-effect free.
* Tag Orca specific changes
Tag Orca specific changes vs. Bambu using the comment //ORCA: . This helps when reviewing merge commits from upstream Bambu so we don't end up causing regressions when pulling in commits from upstream
* Make preview slider labels draggable
Add label hit testing and delta-based dragging for the vertical preview slider labels. Keep label drags tied to the selected handle, prevent slider hover/timeline/menu handling from stealing label interactions, and keep value setters from changing the active selection implicitly.
* Refresh preview slider visuals
Update preview slider rails, handles, and labels for the refreshed light and dark theme appearance. Apply the same visual language to the horizontal slider, align single-layer and multi-layer labels, and remove obsolete triangle label geometry.
* Update the stealth mode description to reflect the current code changes in 2.4.
* disable HMS if bambu network plugin is not installed or in stealth mode
* fix build err
* add hide_login_side_panel to control whether to show login panel in home page
* fix: 409 conflicts resolution in notifications
* fix: silently log other http errors
* fix: pass force push flag to start_sync_user_preset
* remove formatting churn
* fix: propagate force push down put_setting
* refactor render_hyperlink_action to PopNotification for reuse
* fix an issue that hold status should be cleared before force pushing.
---------
Co-authored-by: SoftFever <softfeverever@gmail.com>
* Fix air filtration gcode emitted even if not not supported
- do not emit air filtration gcode if not supported by the printer
- removed redundant "add_eol" parameter from "set_exhaust_fan()" function
* Support 'Default' filament option (index 0)
Treat filament index 0 as the new "Default" (use active object/part filament) instead of using 1. Update config defaults and tooltips for wall/sparse/solid infill filament options (min/default -> 0, tooltip explains "Default"). Adjust normalization and propagation logic to respect explicit feature overrides and only apply base extruder when feature values are zero; only copy sparse->solid infill when sparse > 0. Introduce FeatureFilamentOverrideMask and clamp_feature_filament_to_valid to resolve and clamp feature filaments. Update UI lists and selection behavior to expose a "Default" entry and handle zero-based indices in PartPlate and Plater.
* enable_filament_for_features option
Co-Authored-By: LixNix <105106115+lixnix@users.noreply.github.com>
* \n
* Allow wipe_tower_filament to equal nozzle count
Relax the assertion in Print::extruders to permit wipe_tower_filament == config().nozzle_diameter.size(). The configuration value is 1-based and the code subtracts 1 when pushing the extruder index, so equality should be valid and selecting the last nozzle should not trigger an assertion.
* Revert "Allow wipe_tower_filament to equal nozzle count"
This reverts commit 2c976574327a8bcdc74a1b296bf1aaff7752a94e.
* Revert "enable_filament_for_features option"
This reverts commit 01c13baeddb8e26793f752deab788ee4d086975b.
* Migrate legacy feature filament defaults
Add migration logic to convert legacy feature filament selections from 1 to 0 for older 3mf files. Introduces a local migrate_legacy_feature_filament_defaults lambda in src/OrcaSlicer.cpp and src/slic3r/GUI/Plater.cpp that scans keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) on configs/objects/volumes, updates values, counts conversions and logs the result. Also adds a Semver check for "2.4.0-dev" in OrcaSlicer to trigger the migration for files older than that version. This preserves expected default filament selections when loading older project files.
* Update OrcaSlicer.cpp
* Extract migration helper to ConfigMigrations
Centralize legacy feature-filament default migration by moving the duplicated lambda into ConfigMigrations::migrate_legacy_feature_filament_defaults (src/libslic3r/Config.cpp) and declaring it in Config.hpp. Update OrcaSlicer.cpp and slic3r/GUI/Plater.cpp to call the new function instead of inline lambdas. The helper converts specific feature filament keys (wall_filament, sparse_infill_filament, solid_infill_filament, support_filament, support_interface_filament) from int 1 to 0 and returns the count of conversions to avoid duplicated migration logic.
* Remove DynamicFilamentList1Based and consolidate lists
Delete the specialized DynamicFilamentList1Based struct and its global instance. Update Choice registrations to use the single dynamic_filament_list for wall, sparse_infill and solid_infill filaments, and remove the extra update call for the removed instance. This consolidates filament choice handling and removes duplicated logic in Plater.cpp.
* move it
* fix objects
* Update Config.hpp
* Update profiles
* fix: restore version placeholder in custom G-code
PlaceholderParser sets "version" in its constructor, but Print::apply() calls clear_config() which wipes it. Unlike timestamp/user (restored during G-code export), version was never restored, so [version]/{version} threw "Variable does not exist" in custom G-code while working in output filenames.
Re-set version after both clear_config() calls so it resolves everywhere.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix: resolve timestamp and user placeholders in File header G-code
file_start_gcode is processed via print.placeholder_parser() directly, before the G-code parser integration copy that restores timestamp/user. As a result {timestamp}, {year}..{second} and {user} threw "Variable does not exist" in the File header G-code field while working in Machine start/end G-code.
Inject fresh timestamp and user into the file_start_gcode config so they resolve, matching the other custom G-code fields.
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
* fix: expose initial_extruder and extruded_*_total placeholders in output filenames
PrintStatistics exposed initial_tool (not its documented alias initial_extruder) and total_weight/extruded_volume (not the documented extruded_weight_total/extruded_volume_total). Filename formats using the missing names failed with "not a variable name".
Add the missing aliases to PrintStatistics::config() and placeholders().
Fixes#12436Fixes#10708
Co-Authored-By: Claude Opus 4.7 (1M context) <noreply@anthropic.com>
