Opening a model with a relative path, for example `orca-slicer ./some.3mf`,
failed with "Loading of a model file failed." and "The file does not contain
any geometry data.", while the same file opened by an absolute path or by
drag and drop worked.
GUI_App::init_app_config() changes the working directory to <data_dir>/log,
and it runs from the GUI_App constructor because the app config is needed
early for instance checking. The input files are opened much later, in
post_init(), so a path still relative at that point resolved against the log
directory instead of the directory OrcaSlicer was started from, and the 3MF
reader failed to open it.
Resolve the input paths in CLI::setup(), which runs before GUI_App is
constructed and therefore before the working directory moves. Absolute paths
are returned unchanged, so the forms that open today are unaffected, and
custom open protocol URLs are passed through since post_init() hands those to
the downloader rather than the file loader.
The working directory change is left alone. It was added in #3248 so the TUTK
logs land in the data directory instead of the working directory (#3209).
--export-settings already writes the merged config as JSON at the right
point in the CLI flow. Passing - writes the same document to stdout.
- ConfigBase::save_to_json gains a stream overload. The file overload
serializes through it before opening the file, so the format is
unchanged and a config that cannot be serialized leaves an existing
file untouched instead of truncating it.
- On stdout, invalid UTF-8 in string values is written as U+FFFD instead
of ending the process with an uncaught type_error; files keep the
strict behaviour.
- - is rejected up front when combined with an action or transform that
can write to stdout or does real work, so stdout carries only the
JSON.
- The unconditional "skip locked instance" stdout write during arrange
now goes to the log.
- Tests in tests/libslic3r/test_config.cpp.
* Extract Layer::choose_ironing_extruder for unit-testable ironing routing
The ironing extruder selection in make_ironing() was a 5-line nested
conditional inlined at the top of the loop, with no isolated test
coverage. Pull the gating into a static helper so the routing decision
is unit-testable without spinning up the slicing pipeline.
Pure refactor: the helper preserves the original logic bit-for-bit
(NoIroning -> -1; AllSolid always enabled; TopSurfaces and TopmostOnly
require some top shells or, in spiral mode, more than one bottom shell;
TopmostOnly additionally requires being on the topmost layer; enabled
ironing routes to solid_infill_filament).
Add tests/fff_print/test_choose_ironing_extruder.cpp covering:
- AllSolid regardless of layer position
- TopSurfaces with top_shell_layers > 0
- TopSurfaces with top_shell_layers=0 + spiral mode + bottom_shell_layers>1
- TopmostOnly + topmost layer
- NoIroning short-circuit
- TopSurfaces with top_shell_layers=0 (and not spiral) -> disabled
- TopSurfaces, spiral, but bottom_shell_layers=1 -> disabled
- TopmostOnly on a non-topmost layer -> disabled
* Move ironing routing test into the Fill subsystem file
Rename the test to tests/libslic3r/test_fill.cpp and tag it [Fill] to
match the subsystem it covers, use flat behavioral test cases with
GENERATE for the parameterized ones, and drop the history narration from
the code comments.
* tests: move ironing routing tests into fff_print/test_fill.cpp
Keeps the Fill tests in one file, alongside the existing ironing
rotation-template test.
Resolving a system preset through its vendor manifest loaded the whole vendor tree and the filament library from JSON, and the CLI did that separately for every --load-settings and --load-filaments file. A run with machine, process and filament presets parsed BBL's 2,879 profile files and the library's 512 three times over, about a second each.
Keep the library and vendor bundles loaded by the manifest path on the PresetBundle that resolved them, keyed by source root, vendor and substitution rule, and have the CLI resolve every system preset through one bundle for the whole run. A failed load is not kept, so errors are reported as before.
On a cube slice with X1C machine, process and PLA presets: 2.42 s -> 0.93 s, BBL.json opened once instead of three times, identical G-code.
The lift, speed and cached-extruder members now live in the protected section ahead of the private ones; list their initializers first so the list reads in construction order. No behaviour change.
BeltGCode is only created for belt printers, so its hooks no longer re-check belt_printer, and the BBL-machine flag is set once on whichever writer survives init_belt_writer instead of on one about to be discarded.
Extension layers were all created with id 0, so every one of them could be taken for the first layer by id-only checks (ooze-prevention standby temperature, cached layer ids). Renumber the support layers after inserting them.
gcode_back_transform, first_layer_plane* and belt_printer_infinite_y fell through to invalidate_all_steps(), which re-ran tool ordering, skirt/brim and G-code export on toggles that only affect G-code export.
Apron-only layers printed every band with the first tool, so objects with different brim filaments at the same apron Z shared one filament. Emit each brim filament's bands with its own toolchange.
The ordinary-layer path kept its own copy of the apron band loop. Give emit_belt_brim_bands() an optional brim filament filter and call it from the per-extruder lambda; without a filter it still prints every band, so apron-only layers are unchanged.
Every printer's config block lists belt_slice_rotation_angle (default 45), so the processor marked all G-code as belt G-code: imported flat G-code got the belt view on a belt printer, and the belt-only Z handling in the processor ran for non-belt prints whose config block precedes the body. Take the angle only from outside the config block, where only the belt header writes it.
A 90 degree tilt has no finite gravity drift per layer, so the option range
now stops at 89 degrees, matching the cap applied by the support generators.
The three support generators each computed lh * tan(tilt), which overflows
coord_t at 90 degrees and flips sign beyond it (belt sync can write up to
180). One helper now returns the tilt slope with the tilt capped at 89 degrees.
Painted support/seam facets, support volumes, seam occlusion, MMU and fuzzy skin painting (top/bottom
and side facets) and the adaptive infill octree used trafo_centered(), or trafo() with a centre-offset
shift, while the layers were sliced with the belt rotation, remap and Z lift; they now share
PrintObject::trafo_sliced().
The belt writer replaced the plate-offset-carrying writer mid-export, so belt G-code for any plate but the first kept the plate origin and long-travel clipping used the wrong frame. GCode now remembers the offset and hands it to the new writer, and the writer's first-layer probes use the plate-local point it emits.
Merge origin/main (00429da739) into belt-printer.
Conflicts resolved:
- src/CMakeLists.txt: keep both wxInspector workarounds.
- GCodeProcessor.cpp: keep the belt compare_pos / z_for_height lines.
- PrintObjectSlice.cpp: the belt bbox-Z guard also covers main's
printable_region_ids bookkeeping.
- TreeSupport.cpp: the belt-floor check runs before main's PendingNode
queueing.
- Tab.hpp: keep the belt fields, drop the removed upload description
fields.
- tests/libslic3r/CMakeLists.txt: keep both test files.
Also included:
- eSUN PLA belt presets declare their own filament_id (OFkrxQC4) and
scripts/filament_id_snapshot.json is regenerated, as main's filament_id
check requires.
- Custom.json version bumped to 02.04.00.05 so the belt entries reach
existing installs.
- Fix the ambiguous WithinRel call in the belt apron width test, which
otherwise breaks the fff_print build.
A valid mixed filament already slices the same on the CLI as in the GUI;
these are the places where the CLI still skipped a rule the GUI applies.
- Keep the prime tower when a mixed filament is used, even if every
--load-filaments preset is the same. A mixed filament swaps between its
components every layer, so turning the tower off left the swaps with
nothing to purge on.
- Leave a mixed slot's row and column of the flush matrix at zero when
--filament-colour triggers a recompute, as the GUI does; a mixed slot
never reaches a nozzle.
- Refuse a mixed slot that has no filament of its own. Feature filament
ids aimed at it were past the filament count, got reset to filament 1
and the model silently printed in one colour.
- Refuse a plate that uses a mixed filament whose components are
different filament types, the type half of the GUI's
Sidebar::has_broken_mixed_filament. Missing or out-of-range components
are already rejected for the whole project by validate().
get_extruders_under_cli gains an expand_mixed_slots flag so the gate
can see mixed slots rather than their components; existing callers
keep the expanded list.
Both refusals exit with the new CLI_MIXED_FILAMENT_INVALID (-69).
update_values_to_printer_extruders_for_multiple_filaments picks each
filament's value from the flattened (filament x variant) columns of every
per-filament variant option. When a column index fell past the end of the
option's values, it skipped that filament and left the zero the output
vector was created with.
The GUI always hands this function full columns, but the CLI does not:
- a CLI override of a single value, such as --nozzle-temperature=211 on a
four-filament project, came out as 211,0,0,0, so three filaments would
print at 0 C;
- loading fewer filament presets than the project has filaments left the
remaining filaments' columns missing, so filament_cooling_before_tower
came out as 10,10,0,0 and filament_ramming_volumetric_speed as -1,-1,0,0.
An out-of-range column now keeps the option's first value, the fallback
get_at() and the sibling gather step already use. The seven per-type copies
of the loop are replaced by that same gather_option_values helper, moved
above the function; it now takes its caller's name for its log lines. An
empty option, which has no first value, is given one registered default per
filament first; it used to be replaced with zeros.
On a partial load a filament whose preset was not loaded takes the first
filament's value rather than its own preset's, which the CLI does not load;
for the options seen in practice those agree.
Two independent leaks of filament on the belt purge prism, plus the
replan safety net the second one needs.
1. The early-truncation scan bounded itself with the prism's own
toolchanges. ToolOrdering covers the whole print and the prism is a
printed object in it, so the "last toolchange" the scan found was on
the prism's own top layers -- it runs past every model object by
design -- and the truncation cancelled nothing. Bound the scan at the
tallest non-prism object (support layers included; on a belt they can
top the object). On MCTEST5 that was 197 toolchanges over 39.4 mm of
tower that no swap ever needed.
2. On a layer with no toolchange, the prism's entire fill printed as
solid infill in its own filament. Drop the fills no toolchange
claimed, right after the purge marking and before
ensure_perimeters_infills_order() force-overrides whatever is left.
Perimeters stay so the bar keeps a continuous wall. An earlier version
of this deleted the entities and had to be reverted: psWipeTower can
rerun without regenerating infill, and a later tool ordering may claim
what this one did not. The entities are now stashed with their layer,
region and index and put back exactly, the same reversibility contract
layer truncation already had.
3. Both stashes go stale if an object step reruns: make_fills() clears
and regenerates fills over m_layers only, so a stale stash would put
old fills back next to new ones, and truncated layers would keep old
perimeters/fills. Undo the plan's edits at the top of Print::process()
whenever psWipeTower is not done. Every object-step invalidation also
invalidates psWipeTower, so that condition is exactly "some object
step may rerun"; when it is done nothing regenerates and the edits
must stay. This also covers a prism left behind after belt mode is
turned off, which previously stayed truncated forever.
WipingExtrusions::is_entity_overridden() becomes public so the prism can
tell claimed fills from unclaimed ones.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01SsuY8Laiyh7q2zPVVKV3HZ
* CLI: evaluate compatible_printers_condition in the compat checks
Slicing from the CLI with --load-settings exits with
CLI_PROCESS_NOT_COMPATIBLE (-17), "The selected printer is not compatible
with the process preset in the 3mf.", for process/printer pairs the GUI
accepts. Reproducible with stock, unmodified Prusa system profiles:
orca-slicer --datadir <datadir> \
--load-settings "<datadir>/system/Prusa/process/0.20mm SPEED @CORE One HF 0.4.json;<datadir>/system/Prusa/machine/Prusa CORE One HF 0.4 nozzle.json" \
--load-filaments "<datadir>/system/Prusa/filament/Prusament PETG @CORE One HF 0.4.json" \
--slice 0 --outputdir /tmp/out model.stl
The four compat checks in CLI::run did a literal name match against the
`compatible_printers` list only:
for (index ...) if (new_print_compatible_printers[index] == new_printer_system_name)
process_compatible = true;
Process profiles that declare compatibility through
`compatible_printers_condition` and leave `compatible_printers` empty are
therefore always reported incompatible -- the condition is never consulted.
For 0.20mm SPEED @CORE One HF 0.4 that condition is:
printer_notes=~/.*PRINTER_MODEL_COREONE[^_a-zA-Z0-9].*/ and
nozzle_diameter[0]==0.4 and printer_notes=~/.*HF_NOZZLE.*/
The GUI does not have this bug: is_compatible_with_printer() in Preset.cpp
treats an empty list as "no explicit constraint" and evaluates the
condition in that case.
Fix: replace the four loops with a check_compat lambda that calls
is_compatible_with_printer() -- the same helper the GUI uses -- wrapping
the already-loaded DynamicPrintConfigs in lightweight Preset /
PresetWithVendorProfile shells. The 3MF-embedded process/printer full
configs are kept in current_process_full_config /
current_printer_full_config so the condition can be evaluated for the
reprocess paths too; those fall back to the previous literal match when
the full config was not preserved.
Behaviour is unchanged where an explicit compatible_printers list exists:
is_compatible_with_printer() performs the same name match, and returns
true when both list and condition are empty, matching the existing
"old 3mf, no compatible printers, set to compatible" path.
Split out of #13731 (section 1) as a standalone, single-purpose change.
Orthogonal to the inherits-chain resolution work in #14718 / #15302 /
#15438; those decide which values a preset resolves to, this decides
whether the resulting pair is considered compatible.
* CLI: translate the 3MF's renamed compatibility keys before the compat check
The 3MF fallback fed the project config to is_compatible_with_printer() as-is,
but a project config does not carry compatible_printers or
compatible_printers_condition. PresetBundle::construct_full_config() erases both
and re-emits them as print_compatible_printers and
compatible_machine_expression_group; they are renamed back only on the
PresetBundle load path, which the CLI does not take. The check therefore saw no
list and no condition, read that as 'no constraint' and accepted every printer.
That is not just a wrong accept. An early true skips the !process_compatible
block that sets machine_switch, so the new printer is never appended to
print_compatible_printers and the exported 3MF stays marked compatible only with
the printer it came from -- which is exactly what that block exists to prevent.
Translate the two keys back before the check. Index 0 of the expression group is
the print preset; the group is filled print, filaments, printer.
Also note in the comment that profiles/BBL/{process,machine}_full/ are gitignored
and generated by nothing in-tree, so current_*_full_config is always empty and
this fallback is the only live path -- not the rare non-BBL case the original
comment implied.
Reported with measurements by HanifKoh in review of #15449.
Preset: add a config-level is_compatible_with_printer() overload
The CLI holds resolved DynamicPrintConfigs, not Presets, so it wrapped them in
throwaway Preset shells at the call site. Moving that into Preset.cpp puts the
compatibility policy -- including the documented fail-open on a malformed
compatible_printers_condition -- in one place for the GUI and the CLI, rather
than leaving a second copy of the plumbing in OrcaSlicer.cpp to drift.
Purely additive: neither existing overload changes, so no GUI behaviour moves.
Requested by HanifKoh in review of #15449.
(cherry picked from commit 14ca1972ef4d3c7d90935d159423013a40a6bd70)
* CLI: never overwrite a real compat key with an empty renamed one
7e7f0e3 translated compatible_machine_expression_group[0] into
compatible_printers_condition whenever the group vector was non-empty. A project
the CLI exported itself carries the real compatible_printers_condition AND an
all-empty group, ["", "", ""], so the valid condition was overwritten with
"", the check saw no constraint, and every printer was accepted.
That fixed GUI-shaped projects and broke CLI-shaped ones. Bisected across six
builds re-slicing one CLI-exported CORE One project with an MK4S: every build
before 7e7f0e3 gives 'compatible 0' and takes the machine-switch path; with it,
'compatible 1' and no switch.
The raw keys now win whenever they carry something; the renamed ones are only a
fallback, and an empty value is never written over a real one. Same for the list:
print_compatible_printers is used only when compatible_printers is absent or
empty and it itself is not.
Found by a peer session re-testing the installed build.
A build without SLIC3R_PCH had never been tried on macOS. Three files
used what pchheader.hpp happened to include: LocalesUtils.cpp needs
<sstream> and <iomanip>, and the two dialogs need <wx/tooltip.h>. The
GTK port's headers and libstdc++ pull these in transitively, the Cocoa
port's headers and libc++ do not.
* Fix internal bridges over Hilbert Curve/Octagram Spiral sparse infill
For patterns with curved/turning anchor lines (Hilbert Curve, Octagram
Spiral), the bridge_over_infill algorithm produced incorrect results:
1. determine_bridging_angle: sampling curved anchor orientations
produced noise across all turning directions (0/90/180/270°)
instead of a single dominant one, yielding unstable bridge angles
with 180° spread. Fix: use the configured infill_direction + 90°
directly, bypassing the noisy sampling. The old blind +0.25*PI
(Hilbert) and +1/16*PI (Octagram) offsets are removed.
2. construct_anchored_polygon: curved Hilbert/Octagram anchors
intersected each vertical scan line many times at wildly different
Y positions, producing chaotic polygon sections — holes in random
places, bridges over air, rotated bridges. Fix: replace the curved
infill polylines with synthetic straight lines parallel to
infill_direction, spaced at the real infill line spacing
(flow_spacing / density). Lines are centered on the limiting_area
bbox center so that after rotation they span the full bridged_area.
Anchors are left at full bbox length (not clipped) to guarantee
every scan line finds an anchor.
Rectilinear and other straight-line patterns are unaffected.
Known limitation: some bridge edges may still terminate over air in
edge cases where the nearest synthetic anchor line is more than one
infill spacing away from the bridge boundary. This will be addressed
in a follow-up.
* fix: anchor internal bridges to actual sparse infill
Preserve real anchors across regions and align plane-path anchor origins with printed infill. Respect lower-layer rotation templates and model alignment, and sample curved bridge boundaries more finely.
Add regression coverage for anchor alignment, bridge angles and region isolation, with Orca comments explaining the geometry constraints. Verified 175 FFF tests before the comment-only follow-up; preserve CRLF in modified files.
* Fix internal bridge support contacts and separated infill origins
Restore anchor contact after bridge smoothing and share per-body pattern origins between anchors and printed infill. Recompute origins when preparation settings change.
Cover multiline counts 1, 2 and 3 and add regressions for printed bridge support, separated infill alignment and reslicing.
* Add explicit standard headers to PrintObject tests
* test: cover surface centering when infill settings change
Verify top and bottom Archimedean Chords and Octagram Spiral paths after switching centering modes or toggling separated infills. Compare reslicing against fresh slicing and document dependent infill invalidation.
* test: preserve directional surface infill when settings change
* perf: index layer islands for connected-body detection
* test: use public print pipeline for body centering checks
* build: clear 2 warnings - cast the NSTextField the class check already proved
mainframe_text_field is NSTextField* and was assigned a bare NSView*, which
Clang reports as -Wincompatible-pointer-types. Both assignments sit inside
if ([viewObject class] == [NSTextField self]), so the runtime type is already
guaranteed, and the line above the second one casts the same variable the same
way to call setTextColor. macOS only, since nothing else compiles this file.
* build: clear 6 warning categories from the clang-cl inventory
-Wmissing-braces (9). Aggregates whose first member is itself an aggregate.
GUID's fourth member is BYTE[8], so the trailing eight bytes take their own
braces. The others were reaching for zero-initialization with {0} and say {}
now. bbs_3mf's backup Task ends in an anonymous union, which needs braces of
its own; those braces initialize the union's first member rather than the one
named at the call site, so the RemoveBackup site says so in a comment.
-Wmacro-redefined (11). SendMultiMachinePage.hpp defines five names that
Preferences.hpp, PresetBundleDialog.hpp, ExportPresetBundleDialog.hpp and
TroubleshootDialog.hpp also define with different values, so the value in
force depended on include order. All nine of this file's DESIGN_ macros take
the SEND_ prefix it already uses for its own macros, values unchanged, so a
DESIGN_ name added elsewhere later cannot collide with it again. They read as
one page-local palette, a 900 to 400 gray ramp plus sizes, so the four with
no current readers stay: dropping them would leave gaps in a named scale. test_marchingsquares.cpp defines NOMINMAX,
which libslic3r already passes as a PUBLIC compile definition, so it takes
the #ifndef guard the other suites use.
-Wbraced-scalar-init (3). Two PushStyleVar calls resolve to the float
overload, so the braces were initializing a scalar. ConfigOptionFloatsNullable
already takes an initializer_list, so the inner braces did the same thing.
-Wmicrosoft-goto (2). Both gotos in copy_file_gui jump forward over the
initialization of size, dwRead and dwWrite, which only MSVC accepts. Those
declarations move up to join the others at the top of the function.
-Wunused-private-field (3). Every use of ColourPicker's m_clrData and
m_picker_widget is behind !defined(__linux__), so on Linux they are written
and never read; the members now carry the same guard. ParamsPanel's
m_size_move is read nowhere. Tab has its own, which is the one Tab.cpp uses.
-Wnonportable-include-path (2). BaseException.h asked for "stackwalker.h"
and the file on disk is StackWalker.h.
build: clear eleven single-site clang-cl warning categories
Each of these is the last site left in its category, and every one is the
compiler saying it cannot tell what the code meant. Nothing here changes
defined behavior.
- OrcaSlicer_app_msvc.cpp printed a DWORD with %d
- StackWalker.cpp ran delete[] through an LPVOID
- ToolOrdering.cpp used a bare ; as a deliberate skip loop's body
- WipeTower.cpp had finish_block_tcr = finish_block_tcr, so the branch that
reached it did nothing. Folding the condition into the enclosing if leaves
the other branch untouched
- GCodeProcessor.cpp had an else binding to the inner if while the outer if
carried no braces
- AmsMappingPopupUpdate.cpp wrote >= 1 || <= 3 where its own comment says &&
- CalibrationWizardPresetPage.cpp left max_decimal_length unset through a
pair of conditions that cover every value but not visibly so
- DevManager.cpp bound map elements to pair<K, V> rather than
pair<const K, V>, copying every one
- SyncAmsInfoDialog.cpp had extraneous parentheses around a comparison
- Http.cpp had if (speed > 0.01) speed = speed;. speed now starts at 0 as
well, because curl_easy_getinfo leaves the target untouched when it fails
and the value reaches Progress either way
- SnapmakerPrinterAgent.cpp truncated npos into an unsigned int, so the
!= npos guard was always true. A colour with no # still yields 0, because
the wrap produced 0 as well
Nine categories go to zero. -Wtautological-overlap-compare and
-Wsometimes-uninitialized reach zero when #15583 merges their second site.
fix: report the real error when a Windows G-code export fails
copy_file built its failure message as "Error: " + errCode. Adding a DWORD
to a string literal is pointer arithmetic, not concatenation, so the pointer
lands errCode bytes into an 8-byte literal and runs past its end for any code
above 7. std::string then calls strlen on it and throws length_error, and the
catch(...) in BackgroundSlicingProcess::finalize_gcode replaces the diagnosis
with "Unknown error occurred during exporting G-code."
Every code a user is likely to hit is past the end: write-protected media is
19, no media 21, a full disk 112, and a destination held open by another
program 32. Codes 1 to 7 stay inside the literal and produce a truncated
message instead. So the "Maybe the SD card is write locked?" text has not
been reachable on Windows since this path was added in #2923.
Now that it is reachable, that guess only fits removable media, so it is
conditional on m_export_path_on_removable_media. The existing string is
untouched and keeps its 23 translations; the fixed-drive case adds one string.
* build: clear 2 warnings - a precedence bug and an arm64-only pragma
Both were found by promoting every warning to an error across the CI matrix.
Neither is reported by clang-cl on Windows x64, which is the configuration the
#15374 inventory measures.
LineSplit.hpp reserved with path.size() + closed ? 1 : 0. Addition binds
tighter than ?:, so that parses as (path.size() + closed) ? 1 : 0, and the
function returns early when path is empty, so the condition is always true and
the reserve is always 1. The vector then grows by reallocation instead of
reserving once. Output is unaffected, since reserve only sets capacity.
Reported by Clang on Linux, macOS and Flatpak; GCC does not diagnose it.
Int128.hpp declared #pragma intrinsic(_mul128) under _WIN64, which is defined
on Windows arm64 as well, where that x64 intrinsic does not exist. The call
site at line 190 is already guarded on _M_X64 and carries a comment saying
ARM64 has no _mul128, so the pragma now uses the same guard. x64 is unchanged
because _M_X64 is defined there.
* build: clear 1 warning - CLI error label prints 1 instead of a name
construct_assemble_list is a function, so streaming it converts the function
pointer to bool. When that catch block fires the CLI prints "1: <message>".
This line was already fixed in #5963 and came back in the wholesale revert of
that PR two weeks later, which was reverting an auto-orientation regression
somewhere in its 184 files. The string is restored exactly as it was merged
then.
Both are in our own code and neither shows up in a clang-cl or clang census,
so the Windows and CI matrices have never reported them.
FillRectilinear.cpp draws two trapezoid diagrams whose lines end in a
backslash, which continues a // comment onto the next line. GCC calls that a
multi-line comment. The diagrams are now block comments, where the rule does
not apply, and the drawings are unchanged.
CutObjectBase has a user-provided operator= and a virtual destructor, either
of which deprecates its implicitly generated copy constructor. bbs_3mf.cpp
copies the type through CutObjectInfo. The copy constructor is now declared
and defaulted, leaving the class with no implicit copy member. Move
operations were already suppressed by the user-provided operator=, so nothing
changes there.
Every edit makes the precedence the compiler already applies explicit. None
of them regroups an expression, so behavior is unchanged at all eight sites.
Strip parentheses and whitespace from the diff and the token stream matches.
GCodeProcessor.cpp:1472 tests == where the symmetric clause below tests !=,
which reads like a typo and is not one. A comment now explains why.
OrcaSlicer.cpp:4760 was the only judgment call. Its leading !is_seq_print is
bare while both operands are parenthesized, so the written form matches what
the compiler does. Kept rather than guessed at.
Kris Austin