juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-18 19:12:17 +00:00
Code Issues Packages Projects Releases Wiki Activity

Hide some non-applicable settings for tree supports to prevent confusion (#12367)

Browse Source 
Hide tree support parameters not in use

- hide independent support layer height for organic tree support
- hide threshold overlap for tree supports

Co-authored-by: SoftFever <softfeverever@gmail.com>
This commit is contained in:
Kiss Lorand
2026-05-14 19:50:20 +03:00
committed by GitHub
parent 26e6216d91
commit 291b34a8fd
24 changed files with 204 additions and 94 deletions
Download Patch File Download Diff File Expand all files Collapse all files

18
localization/i18n/nl/OrcaSlicer_nl.po
View File

@@ -17993,11 +17993,15 @@ msgid "Threshold angle"
msgstr "Drempel hoek"
msgid ""
"Support will be generated for overhangs whose slope angle is below the "
"threshold."
"Support will be generated for overhangs whose slope angle is below the threshold. "
"The smaller this value is, the steeper the overhang that can be printed without support.\n"
"Note: If set to 0, normal supports use the Threshold overlap instead, "
"while tree supports fall back to a default value of 30."
msgstr ""
"Er zal ondersteuning support gegenereerd worden voor overhangende hoeken "
"waarvan de hellingshoek lager is dan deze drempel."
"Er zal ondersteuning support gegenereerd worden voor overhangende hoeken waarvan de hellingshoek lager is dan deze drempel."
"Hoe kleiner deze waarde is, hoe steiler de overhang die zonder ondersteuning kan worden geprint.\n"
"Opmerking: Indien ingesteld op 0, gebruiken normale ondersteuningen in plaats daarvan de drempelwaarde voor overlap,"
"terwijl boomstructuurondersteuningen terugvallen op een standaardwaarde van 30."
msgid "Threshold overlap"
msgstr "Threshold overlap"
@@ -18007,9 +18011,9 @@ msgid ""
"overlap is below the threshold. The smaller this value is, the steeper the "
"overhang that can be printed without support."
msgstr ""
"If threshold angle is zero, support will be generated for overhangs whose "
"overlap is below the threshold. The smaller this value is, the steeper the "
"overhang that can be printed without support."
"Als de drempelhoek nul is, wordt er ondersteuning gegenereerd voor overhangen waarvan de overlap "
"onder de drempelwaarde ligt. Hoe kleiner deze waarde is, hoe steiler de overhang die zonder "
"ondersteuning kan worden geprint."
msgid "Tree support branch angle"
msgstr "Tree support vertakkingshoek"