From 291b34a8fdb1628ff10b8d82b91c01d8f8eb83f2 Mon Sep 17 00:00:00 2001 From: Kiss Lorand <50251547+kisslorand@users.noreply.github.com> Date: Thu, 14 May 2026 19:50:20 +0300 Subject: [PATCH] Hide some non-applicable settings for tree supports to prevent confusion (#12367) Hide tree support parameters not in use - hide independent support layer height for organic tree support - hide threshold overlap for tree supports Co-authored-by: SoftFever --- localization/i18n/OrcaSlicer.pot | 6 ++++-- localization/i18n/ca/OrcaSlicer_ca.po | 12 ++++++++---- localization/i18n/cs/OrcaSlicer_cs.po | 11 ++++++++--- localization/i18n/de/OrcaSlicer_de.po | 12 ++++++++---- localization/i18n/en/OrcaSlicer_en.po | 12 ++++++++---- localization/i18n/es/OrcaSlicer_es.po | 12 ++++++++---- localization/i18n/fr/OrcaSlicer_fr.po | 12 ++++++++---- localization/i18n/hu/OrcaSlicer_hu.po | 12 ++++++++---- localization/i18n/it/OrcaSlicer_it.po | 12 ++++++++---- localization/i18n/ja/OrcaSlicer_ja.po | 17 +++++++++++++---- localization/i18n/ko/OrcaSlicer_ko.po | 12 +++++++++--- localization/i18n/lt/OrcaSlicer_lt.po | 11 ++++++++--- localization/i18n/nl/OrcaSlicer_nl.po | 18 +++++++++++------- localization/i18n/pl/OrcaSlicer_pl.po | 12 ++++++++---- localization/i18n/pt_BR/OrcaSlicer_pt_BR.po | 12 ++++++++---- localization/i18n/ru/OrcaSlicer_ru.po | 12 ++++++++---- localization/i18n/sv/OrcaSlicer_sv.po | 18 ++++++++++++------ localization/i18n/tr/OrcaSlicer_tr.po | 12 +++++++++--- localization/i18n/uk/OrcaSlicer_uk.po | 12 +++++++++--- localization/i18n/vi/OrcaSlicer_vi.po | 12 +++++++++--- localization/i18n/zh_CN/OrcaSlicer_zh_CN.po | 12 +++++++++--- localization/i18n/zh_TW/OrcaSlicer_zh_TW.po | 12 +++++++++--- src/libslic3r/PrintConfig.cpp | 5 ++++- src/slic3r/GUI/ConfigManipulation.cpp | 20 ++++++++++---------- 24 files changed, 204 insertions(+), 94 deletions(-) diff --git a/localization/i18n/OrcaSlicer.pot b/localization/i18n/OrcaSlicer.pot index a0be2b65c2..04ce132983 100644 --- a/localization/i18n/OrcaSlicer.pot +++ b/localization/i18n/OrcaSlicer.pot @@ -15547,8 +15547,10 @@ msgid "Threshold angle" msgstr "" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." msgstr "" msgid "Threshold overlap" diff --git a/localization/i18n/ca/OrcaSlicer_ca.po b/localization/i18n/ca/OrcaSlicer_ca.po index d29790b59e..f22400ed0a 100644 --- a/localization/i18n/ca/OrcaSlicer_ca.po +++ b/localization/i18n/ca/OrcaSlicer_ca.po @@ -18218,11 +18218,15 @@ msgid "Threshold angle" msgstr "Pendent màxim" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." msgstr "" -"Es generarà un suport per a voladissos l'angle de pendent dels quals estigui " -"per sota del llindar." +"Es generarà suport per als voladissos l'angle de pendent dels quals estigui per sota del llindar." +"Com més petit sigui aquest valor, més inclinat serà el voladís que es pot imprimir sense suport.\n" +"Nota: si s'estableix a 0, els suports normals utilitzen en el seu lloc la Superposició de llindars, " +"mentre que els suports en arbre tornen al valor predeterminat de 30." msgid "Threshold overlap" msgstr "Superposició de llindars" diff --git a/localization/i18n/cs/OrcaSlicer_cs.po b/localization/i18n/cs/OrcaSlicer_cs.po index 605d844421..fa0fb9e794 100644 --- a/localization/i18n/cs/OrcaSlicer_cs.po +++ b/localization/i18n/cs/OrcaSlicer_cs.po @@ -17715,10 +17715,15 @@ msgid "Threshold angle" msgstr "Prahový úhel" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." msgstr "" -"Podpěry budou generovány pro převisy s úhlem sklonu pod nastaveným prahem." +"Podpěry budou generovány pro převisy s úhlem sklonu pod nastaveným prahem. " +"Čím menší je tato hodnota, tím strmější převis lze tisknout bez podpěr.\n" +"Poznámka: Pokud je nastavena na 0, běžné podpěry místo toho použijí Hraniční překrytí, " +"zatímco stromové podpěry se vrátí na výchozí hodnotu 30." msgid "Threshold overlap" msgstr "Prahové překrytí" diff --git a/localization/i18n/de/OrcaSlicer_de.po b/localization/i18n/de/OrcaSlicer_de.po index 7f71047333..680266959a 100644 --- a/localization/i18n/de/OrcaSlicer_de.po +++ b/localization/i18n/de/OrcaSlicer_de.po @@ -18337,11 +18337,15 @@ msgid "Threshold angle" msgstr "Schwellenwinkel" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." msgstr "" -"Für Überhänge, deren Neigungswinkel unter diesem Wert liegt, werden Stützen " -"generiert." +"Für Überhänge, deren Neigungswinkel unter diesem Schwellwert liegt, werden Stützen generiert." +"Je kleiner dieser Wert ist, desto steiler kann der Überhang ohne Stützen gedruckt werden.\n" +"Hinweis: Bei 0 verwenden normale Stützen stattdessen die Schwellwertüberlappung, " +"während Baumstützen auf den Standardwert 30 zurückfallen." msgid "Threshold overlap" msgstr "Schwellwertüberlappung" diff --git a/localization/i18n/en/OrcaSlicer_en.po b/localization/i18n/en/OrcaSlicer_en.po index 4b45f82484..566052444c 100644 --- a/localization/i18n/en/OrcaSlicer_en.po +++ b/localization/i18n/en/OrcaSlicer_en.po @@ -15900,11 +15900,15 @@ msgid "Threshold angle" msgstr "" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." msgstr "" -"Support will be generated for overhangs whose slope angle is below this " -"threshold." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." msgid "Threshold overlap" msgstr "" diff --git a/localization/i18n/es/OrcaSlicer_es.po b/localization/i18n/es/OrcaSlicer_es.po index 13ced44ab5..10785b1760 100644 --- a/localization/i18n/es/OrcaSlicer_es.po +++ b/localization/i18n/es/OrcaSlicer_es.po @@ -18482,11 +18482,15 @@ msgid "Threshold angle" msgstr "Pendiente máxima" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." msgstr "" -"Se generará un soporte para los voladizos cuyo ángulo de inclinación sea " -"inferior al umbral." +"Se generará soporte para los voladizos cuyo ángulo de inclinación sea inferior al umbral." +"Cuanto menor sea este valor, más pronunciado podrá ser el voladizo que se imprima sin soporte.\n" +"Nota: Si se establece en 0, los soportes normales usarán en su lugar Umbral de solapamiento, " +"mientras que los soportes de árbol volverán al valor predeterminado de 30." msgid "Threshold overlap" msgstr "Umbral de solapamiento" diff --git a/localization/i18n/fr/OrcaSlicer_fr.po b/localization/i18n/fr/OrcaSlicer_fr.po index 62b951b878..97805813d1 100644 --- a/localization/i18n/fr/OrcaSlicer_fr.po +++ b/localization/i18n/fr/OrcaSlicer_fr.po @@ -18458,11 +18458,15 @@ msgid "Threshold angle" msgstr "Angle de seuil" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." msgstr "" -"Un support sera généré pour les surplombs dont l'angle de pente est " -"inférieur au seuil." +"Un support sera généré pour les surplombs dont l'angle de pente est inférieur au seuil." +"Plus cette valeur est petite, plus le surplomb imprimable sans support est raide.\n" +"Remarque : si elle est définie sur 0, les supports normaux utilisent à la place Chevauchement du seuil, " +"tandis que les supports arborescents reviennent à la valeur par défaut de 30." msgid "Threshold overlap" msgstr "Chevauchement du seuil" diff --git a/localization/i18n/hu/OrcaSlicer_hu.po b/localization/i18n/hu/OrcaSlicer_hu.po index c058efa623..141dd7429a 100644 --- a/localization/i18n/hu/OrcaSlicer_hu.po +++ b/localization/i18n/hu/OrcaSlicer_hu.po @@ -18080,11 +18080,15 @@ msgid "Threshold angle" msgstr "Dőlésszög küszöbértéke" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." msgstr "" -"Az olyan túlnyúlásoknál, amelynek dőlésszöge ez alatt az érték alatt van, " -"támasz fog generálódni." +"Az olyan túlnyúlásoknál, amelynek dőlésszöge ez alatt az érték alatt van, támasz fog generálódni." +"Minél kisebb ez az érték, annál meredekebb a túlnyúlás, amely alátámasztás nélkül nyomtatható.\n" +"Megjegyzés: Ha 0-ra van állítva, a normál támaszok a Küszöbátfedést használják, " +"míg a fa típusú támaszok az alapértelmezett 30-as értékre térnek vissza." msgid "Threshold overlap" msgstr "Átfedési küszöbérték" diff --git a/localization/i18n/it/OrcaSlicer_it.po b/localization/i18n/it/OrcaSlicer_it.po index 58570c856b..991fe0c0fa 100644 --- a/localization/i18n/it/OrcaSlicer_it.po +++ b/localization/i18n/it/OrcaSlicer_it.po @@ -18330,11 +18330,15 @@ msgid "Threshold angle" msgstr "Angolo di soglia" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." msgstr "" -"I supporti verranno generati per le sporgenze il cui angolo di inclinazione " -"è inferiore a questa soglia." +"I supporti verranno generati per gli sbalzi il cui angolo di inclinazione è inferiore alla soglia." +"Più piccolo è questo valore, più ripido sarà lo sbalzo che può essere stampato senza supporto.\n" +"Nota: se impostato su 0, i supporti normali useranno invece Soglia sovrapposizione, " +"mentre i supporti ad albero torneranno al valore predefinito di 30." msgid "Threshold overlap" msgstr "Soglia sovrapposizione" diff --git a/localization/i18n/ja/OrcaSlicer_ja.po b/localization/i18n/ja/OrcaSlicer_ja.po index fcaab2d950..1229f7d176 100644 --- a/localization/i18n/ja/OrcaSlicer_ja.po +++ b/localization/i18n/ja/OrcaSlicer_ja.po @@ -16618,18 +16618,27 @@ msgid "Threshold angle" msgstr "閾値角度" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." -msgstr "オーバーハングの角度がこの閾値以下になる場合、サポートを生成します" +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." +msgstr "" +"オーバーハングの角度がこの閾値以下になる場合、サポートを生成します" +"この値が小さいほど、サポートなしで印刷できるオーバーハングの急勾配になります。\n" +"注: 0 に設定すると、通常のサポートは代わりに閾値オーバーラップを使用しますが、" +"ツリーサポートはデフォルト値の 30 に戻ります。" msgid "Threshold overlap" -msgstr "" +msgstr "閾値の重複" msgid "" "If threshold angle is zero, support will be generated for overhangs whose " "overlap is below the threshold. The smaller this value is, the steeper the " "overhang that can be printed without support." msgstr "" +"しきい値角度がゼロの場合、オーバーラップがしきい値を下回るオーバーハングに対" +"してサポートが生成されます。この値が小さいほど、サポートなしで印刷できるオ" +"ーバーハングの角度が急になります。" msgid "Tree support branch angle" msgstr "ツリーサポート枝アングル" diff --git a/localization/i18n/ko/OrcaSlicer_ko.po b/localization/i18n/ko/OrcaSlicer_ko.po index b88702d887..01764f679a 100644 --- a/localization/i18n/ko/OrcaSlicer_ko.po +++ b/localization/i18n/ko/OrcaSlicer_ko.po @@ -17001,9 +17001,15 @@ msgid "Threshold angle" msgstr "임계값 각도" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." -msgstr "경사각이 임계값 미만인 오버행에 서포트가 생성됩니다." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." +msgstr "" +"기울기 각도가 임계값보다 작은 오버행에 대해 서포트가 생성됩니다." +"이 값이 작을수록 서포트 없이 출력할 수 있는 오버행이 더 가파릅니다.\n" +"참고: 0으로 설정하면 일반 서포트는 대신 임계값 중복을 사용하고, " +"트리 서포트는 기본값 30으로 돌아갑니다." msgid "Threshold overlap" msgstr "임계값 중복" diff --git a/localization/i18n/lt/OrcaSlicer_lt.po b/localization/i18n/lt/OrcaSlicer_lt.po index 46d73a6a61..1c5ab711d8 100644 --- a/localization/i18n/lt/OrcaSlicer_lt.po +++ b/localization/i18n/lt/OrcaSlicer_lt.po @@ -17986,10 +17986,15 @@ msgid "Threshold angle" msgstr "Ribinis kampas" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." msgstr "" -"Iškyšoms, kurių nuolydžio kampas yra mažesnis už ribą, bus sukurta atrama." +"Atramos bus generuojamos iškyšoms, kurių nuolydžio kampas yra mažesnis už slenkstį." +"Kuo mažesnė ši reikšmė, tuo statesnę iškyšą galima spausdinti be atramų.\n" +"Pastaba: jei nustatyta 0, įprastos atramos vietoje naudoja Slenksčio persidengimas, " +"o medžio tipo atramos grįžta prie numatytosios 30 reikšmės." msgid "Threshold overlap" msgstr "Slenksčio persidengimas" diff --git a/localization/i18n/nl/OrcaSlicer_nl.po b/localization/i18n/nl/OrcaSlicer_nl.po index af7e81a7a8..827c19d732 100644 --- a/localization/i18n/nl/OrcaSlicer_nl.po +++ b/localization/i18n/nl/OrcaSlicer_nl.po @@ -17993,11 +17993,15 @@ msgid "Threshold angle" msgstr "Drempel hoek" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." msgstr "" -"Er zal ondersteuning support gegenereerd worden voor overhangende hoeken " -"waarvan de hellingshoek lager is dan deze drempel." +"Er zal ondersteuning support gegenereerd worden voor overhangende hoeken waarvan de hellingshoek lager is dan deze drempel." +"Hoe kleiner deze waarde is, hoe steiler de overhang die zonder ondersteuning kan worden geprint.\n" +"Opmerking: Indien ingesteld op 0, gebruiken normale ondersteuningen in plaats daarvan de drempelwaarde voor overlap," +"terwijl boomstructuurondersteuningen terugvallen op een standaardwaarde van 30." msgid "Threshold overlap" msgstr "Threshold overlap" @@ -18007,9 +18011,9 @@ msgid "" "overlap is below the threshold. The smaller this value is, the steeper the " "overhang that can be printed without support." msgstr "" -"If threshold angle is zero, support will be generated for overhangs whose " -"overlap is below the threshold. The smaller this value is, the steeper the " -"overhang that can be printed without support." +"Als de drempelhoek nul is, wordt er ondersteuning gegenereerd voor overhangen waarvan de overlap " +"onder de drempelwaarde ligt. Hoe kleiner deze waarde is, hoe steiler de overhang die zonder " +"ondersteuning kan worden geprint." msgid "Tree support branch angle" msgstr "Tree support vertakkingshoek" diff --git a/localization/i18n/pl/OrcaSlicer_pl.po b/localization/i18n/pl/OrcaSlicer_pl.po index 74d05f7a82..a3e6b0af05 100644 --- a/localization/i18n/pl/OrcaSlicer_pl.po +++ b/localization/i18n/pl/OrcaSlicer_pl.po @@ -17424,11 +17424,15 @@ msgid "Threshold angle" msgstr "Kąt progowy" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." msgstr "" -"Podpora zostanie wygenerowana dla nawisów, których kąt nachylenia jest " -"poniżej tego progu." +"Podpora zostanie wygenerowana dla nawisów, których kąt nachylenia jest poniżej tego progu." +"Im mniejsza jest ta wartość, tym bardziej stromy nawis można wydrukować bez podpór.\n" +"Uwaga: Jeśli ustawiono na 0, normalne podpory używają zamiast tego progu nakładania się, " +"podpory drzewne wracają do domyślnej wartości 30." msgid "Threshold overlap" msgstr "Próg nakładania" diff --git a/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po b/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po index 515278b68e..e52deb8c5e 100644 --- a/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po +++ b/localization/i18n/pt_BR/OrcaSlicer_pt_BR.po @@ -18156,11 +18156,15 @@ msgid "Threshold angle" msgstr "Ângulo limiar" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." msgstr "" -"O suporte será gerado para saliências cujo ângulo de inclinação estiver " -"abaixo do limiar." +"O suporte será gerado para saliências cujo ângulo de inclinação esteja abaixo do limiar." +"Quanto menor esse valor, mais íngreme será a saliência que pode ser impressa sem suporte.\n" +"Observação: se definido como 0, os suportes normais usarão Sobreposição de limiar, " +"enquanto os suportes em árvore voltarão ao valor padrão de 30." msgid "Threshold overlap" msgstr "Sobreposição de limiar" diff --git a/localization/i18n/ru/OrcaSlicer_ru.po b/localization/i18n/ru/OrcaSlicer_ru.po index aaeb5fdffb..b0afabb0d5 100644 --- a/localization/i18n/ru/OrcaSlicer_ru.po +++ b/localization/i18n/ru/OrcaSlicer_ru.po @@ -18646,11 +18646,15 @@ msgstr "Максимальный угол" # поддержки при этом будут использовать угол по умолчанию (30°)" ВНИМАНИЕ: # последнее предложение – особенность PR msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." msgstr "" -"Генерировать поддержки для поверхностей, угол нависания которых " -"(относительно стола) меньше указанного тут значения." +"Создавать поддержки для поверхностей с указанным или более острым углом нависания над столом. " +"С понижением угла повышается допустимый наклон поверхности для печати без поддержки.\n" +"Примечание: используйте 0° для переключения обычных поддержек в режим обнаружения нависаний по проценту выноса линии. " +"Древовидные поддержки при этом будут использовать угол по умолчанию (30°)" # ??? Порог перекрытия периметров msgid "Threshold overlap" diff --git a/localization/i18n/sv/OrcaSlicer_sv.po b/localization/i18n/sv/OrcaSlicer_sv.po index 7b10df3499..a42e820d05 100644 --- a/localization/i18n/sv/OrcaSlicer_sv.po +++ b/localization/i18n/sv/OrcaSlicer_sv.po @@ -17804,9 +17804,15 @@ msgid "Threshold angle" msgstr "Gräns vinkel" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." -msgstr "Support skapas för överhäng vars sluttning är under denna gräns." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." +msgstr "" +"Support skapas för överhäng vars sluttning är under denna gräns." +"Ju mindre detta värde är, desto brantare överhäng kan skrivas ut utan stöd.\n" +"Obs: Om det är satt till 0 använder vanliga stöd istället tröskelöverlappningen, " +"medan trädstöd faller tillbaka till ett standardvärde på 30." msgid "Threshold overlap" msgstr "Threshold overlap" @@ -17816,9 +17822,9 @@ msgid "" "overlap is below the threshold. The smaller this value is, the steeper the " "overhang that can be printed without support." msgstr "" -"If threshold angle is zero, support will be generated for overhangs whose " -"overlap is below the threshold. The smaller this value is, the steeper the " -"overhang that can be printed without support." +"Om tröskelvinkeln är noll genereras stöd för överhäng vars överlappning " +"är under tröskeln. Ju mindre detta värde är, desto brantare är det överhäng " +"som kan skrivas ut utan stöd." msgid "Tree support branch angle" msgstr "Tree support grenarnas vinkel" diff --git a/localization/i18n/tr/OrcaSlicer_tr.po b/localization/i18n/tr/OrcaSlicer_tr.po index 6f2fd833f1..6667141e66 100644 --- a/localization/i18n/tr/OrcaSlicer_tr.po +++ b/localization/i18n/tr/OrcaSlicer_tr.po @@ -17908,9 +17908,15 @@ msgid "Threshold angle" msgstr "Destek açısı" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." -msgstr "Eğim açısı eşiğin altında olan çıkmalar için destek oluşturulacaktır." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." +msgstr "" +"Eğim açısı eşik değerinin altında olan çıkıntılar için destek oluşturulacaktır." +"Bu değer ne kadar küçükse, desteksiz yazdırılabilecek çıkıntı o kadar dik olur.\n" +"Not: 0 olarak ayarlanırsa, normal destekler bunun yerine Eşik çakışması kullanır, " +"ağaç destekler ise varsayılan 30 değerine geri döner." msgid "Threshold overlap" msgstr "Eşik çakışması" diff --git a/localization/i18n/uk/OrcaSlicer_uk.po b/localization/i18n/uk/OrcaSlicer_uk.po index db32cc12d3..85589819de 100644 --- a/localization/i18n/uk/OrcaSlicer_uk.po +++ b/localization/i18n/uk/OrcaSlicer_uk.po @@ -17405,9 +17405,15 @@ msgid "Threshold angle" msgstr "Кут порога" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." -msgstr "Буде створена опора для нависань з кутом нахилу нижче порогу." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." +msgstr "" +"Буде створена опора для нависань з кутом нахилу нижче порогу." +"Чим менше це значення, тим крутіше нависання можна надрукувати без підтримки.\n" +"Примітка: Якщо встановлено значення 0, звичайні опори використовують перекриття " +"порогу, тоді як опори дерев повертаються до значення за замовчуванням 30." msgid "Threshold overlap" msgstr "Поріг накладання" diff --git a/localization/i18n/vi/OrcaSlicer_vi.po b/localization/i18n/vi/OrcaSlicer_vi.po index 3c9fd8260d..3cd500544f 100644 --- a/localization/i18n/vi/OrcaSlicer_vi.po +++ b/localization/i18n/vi/OrcaSlicer_vi.po @@ -17604,9 +17604,15 @@ msgid "Threshold angle" msgstr "Góc ngưỡng" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." -msgstr "Support sẽ được tạo cho phần nhô có góc dốc dưới ngưỡng." +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." +msgstr "" +"Hỗ trợ sẽ được tạo cho các phần nhô có góc dốc thấp hơn ngưỡng." +"Giá trị này càng nhỏ, phần nhô có thể in không cần hỗ trợ càng dốc.\n" +"Lưu ý: Nếu đặt thành 0, hỗ trợ thường sẽ dùng Chồng lấp ngưỡng thay thế, " +"còn hỗ trợ dạng cây sẽ quay về giá trị mặc định là 30." msgid "Threshold overlap" msgstr "Chồng lấp ngưỡng" diff --git a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po index 03d2b69ef9..ba2f5cfc79 100644 --- a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po +++ b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po @@ -16572,9 +16572,15 @@ msgid "Threshold angle" msgstr "阈值角度" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." -msgstr "将会为悬垂角度低于阈值的模型表面生成支撑。" +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." +msgstr "" +"将会为倾斜角度低于阈值的悬垂生成支撑。" +"该值越小，可在不使用支撑的情况下打印的悬垂就越陡。\n" +"注意：若设置为 0，普通支撑将改用阈值支撑比例，" +"而树状支撑将回退到默认值 30。" msgid "Threshold overlap" msgstr "阈值支撑比例" diff --git a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po index 20f1fd42e8..5b695ea81b 100644 --- a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po +++ b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po @@ -16705,9 +16705,15 @@ msgid "Threshold angle" msgstr "臨界值角度" msgid "" -"Support will be generated for overhangs whose slope angle is below the " -"threshold." -msgstr "將會為懸空角度低於臨界值的模型表面產生支撐。" +"Support will be generated for overhangs whose slope angle is below the threshold. " +"The smaller this value is, the steeper the overhang that can be printed without support.\n" +"Note: If set to 0, normal supports use the Threshold overlap instead, " +"while tree supports fall back to a default value of 30." +msgstr "" +"將會為傾斜角度低於臨界值的懸垂產生支撐。" +"數值越小，代表可以在不使用支撐的情況下列印更陡峭的懸垂結構。\n" +"注意：若設為 0，一般支撐會改用閾值疊加比例，" +"而樹狀支撐則會回退到預設值 30。" msgid "Threshold overlap" msgstr "閾值疊加比例" diff --git a/src/libslic3r/PrintConfig.cpp b/src/libslic3r/PrintConfig.cpp index ec9b30a865..69c97286f5 100644 --- a/src/libslic3r/PrintConfig.cpp +++ b/src/libslic3r/PrintConfig.cpp @@ -6183,7 +6183,10 @@ void PrintConfigDef::init_fff_params() def = this->add("support_threshold_angle", coInt); def->label = L("Threshold angle"); def->category = L("Support"); - def->tooltip = L("Support will be generated for overhangs whose slope angle is below the threshold."); + def->tooltip = L("Support will be generated for overhangs whose slope angle is below the threshold. " + "The smaller this value is, the steeper the overhang that can be printed without support.\n" + "Note: If set to 0, normal supports use the Threshold overlap instead, " + "while tree supports fall back to a default value of 30."); def->sidetext = u8"°"; // degrees, don't need translation def->min = 0; def->max = 90; diff --git a/src/slic3r/GUI/ConfigManipulation.cpp b/src/slic3r/GUI/ConfigManipulation.cpp index 65a475d817..dbb0e8d525 100644 --- a/src/slic3r/GUI/ConfigManipulation.cpp +++ b/src/slic3r/GUI/ConfigManipulation.cpp @@ -546,8 +546,7 @@ void ConfigManipulation::update_print_fff_config(DynamicPrintConfig* config, con void ConfigManipulation::apply_null_fff_config(DynamicPrintConfig *config, std::vector const &keys, std::map const &configs) { for (auto &k : keys) { - if (/*k == "adaptive_layer_height" || */ k == "independent_support_layer_height" || k == "enable_support" || - k == "detect_thin_wall" || k == "tree_support_adaptive_layer_height") + if (k == "independent_support_layer_height" || k == "enable_support" || k == "detect_thin_wall") config->set_key_value(k, new ConfigOptionBool(true)); else if (k == "wall_loops") config->set_key_value(k, new ConfigOptionInt(0)); @@ -742,19 +741,20 @@ void ConfigManipulation::toggle_print_fff_options(DynamicPrintConfig *config, co //toggle_field("support_closing_radius", have_support_material && support_style == smsSnug); bool support_is_tree = config->opt_bool("enable_support") && is_tree(support_type); - bool support_is_normal_tree = support_is_tree && support_style != smsTreeOrganic && - // Orca: use organic as default - support_style != smsDefault; - bool support_is_organic = support_is_tree && !support_is_normal_tree; - // settings shared by normal and organic trees - for (auto el : {"tree_support_branch_angle", "tree_support_branch_distance", "tree_support_branch_diameter" }) - toggle_line(el, support_is_normal_tree); + bool support_is_organic = support_is_tree && (support_style == smsTreeOrganic || support_style == smsDefault); + bool support_is_normal_tree = support_is_tree && !support_is_organic; + + // hide settings that are not used by tree supports + toggle_line("support_threshold_overlap", !support_is_tree); // ORCA: tree supports do not use Threshold Overlap // settings specific to normal trees - for (auto el : {"tree_support_auto_brim", "tree_support_brim_width", "tree_support_adaptive_layer_height"}) + for (auto el : {"tree_support_branch_angle", "tree_support_branch_distance", "tree_support_branch_diameter", "tree_support_auto_brim", "tree_support_brim_width"}) toggle_line(el, support_is_normal_tree); // settings specific to organic trees for (auto el : {"tree_support_branch_angle_organic", "tree_support_branch_distance_organic", "tree_support_branch_diameter_organic", "tree_support_angle_slow", "tree_support_tip_diameter", "tree_support_top_rate", "tree_support_branch_diameter_angle"}) toggle_line(el, support_is_organic); + // ORCA: Independent support layer height is not compatible with organic tree supports, + // as they rely on the support layers being the same as the object layers to determine where to place branches. + toggle_line("independent_support_layer_height", have_support_material && !support_is_organic); toggle_field("tree_support_brim_width", support_is_tree && !config->opt_bool("tree_support_auto_brim")); // tree support use max_bridge_length instead of bridge_no_support