mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-06 23:31:19 +00:00
HLSD seems too official for this
This commit is contained in:
Eric McCann
@@ -1,108 +0,0 @@
|
||||
# Snapmaker U1 high-flow profiles
|
||||
|
||||
The U1 provides separate High Flow printer presets for 0.2, 0.4, 0.6 and
|
||||
0.8 mm nozzles. Each describes four tools fitted with the same diameter and
|
||||
high-flow nozzle. They inherit the corresponding standard printer, retaining
|
||||
its model identity, geometry, motion limits and machine G-code. Existing
|
||||
standard and mixed-diameter presets retain their settings and names.
|
||||
|
||||
Enable the High Flow variants under Snapmaker U1 in the printer setup, select
|
||||
the matching printer, and select a filament whose name includes that diameter
|
||||
and `High Flow nozzle`. PLA SnapSpeed is the default material for these
|
||||
printers. Dedicated HF process presets preserve diameter-specific extrusion
|
||||
widths and layer heights while overriding the four print speeds below.
|
||||
Separate HF filament presets keep higher ceilings out of standard-nozzle
|
||||
material settings.
|
||||
|
||||
## Process speeds
|
||||
|
||||
All 36 HF process presets, across 0.2, 0.4, 0.6 and 0.8 mm nozzles,
|
||||
use the same requested speeds from Snorca's 0.4 mm HF Standard process:
|
||||
|
||||
| Setting | Speed (mm/s) |
|
||||
| --- | ---: |
|
||||
| Inner walls | 600 |
|
||||
| Outer walls | 500 |
|
||||
| Internal solid infill | 600 |
|
||||
| Sparse infill | 600 |
|
||||
|
||||
Each HF process inherits its standard diameter/layer-height counterpart,
|
||||
so geometry, accelerations, first-layer speeds, bridges, overhangs and other
|
||||
settings remain diameter-specific. Standard printers retain their original
|
||||
process speeds. HF printers default to the corresponding HF process.
|
||||
Volumetric ceilings and machine motion limits still cap actual speeds.
|
||||
|
||||
## Chamber and purifier control
|
||||
|
||||
All U1 start sequences, including the mixed-diameter and inherited HF
|
||||
profiles, issue `SET_PURIFIER_MODE` automatically. The start G-code checks the existing
|
||||
`min_vitrification_temperature` placeholder, the lowest Softening temperature
|
||||
(`temperature_vitrification`) among the filaments actually used on the plate:
|
||||
at or below 50 C selects strong cooling, above 50 C through 70 C selects weak
|
||||
cooling, and above 70 C selects keep-warm mode. Unused materials do not affect
|
||||
the result. There is no extra filament flag or enable setting.
|
||||
|
||||
The firmware parameters match Snorca: strong cooling uses mode 1, target
|
||||
42 C, alarm 45 C, fan 0.6 and no delayed shutdown; weak cooling uses mode 3,
|
||||
target 0 C, fan 0.6 and a 600-second delay; keep-warm uses mode 3, target
|
||||
45 C, fan 0.6 and a 600-second delay. Mode selection happens once at print
|
||||
start and depends on the accuracy of each filament's softening temperature.
|
||||
|
||||
## Calibration sources
|
||||
|
||||
Except for the volumetric ceiling, the original 0.4 mm HF material overrides come from Snapmaker/OrcaSlicer `snorca/main`
|
||||
commit `b1831e5dcb`, under `resources/profiles/Snapmaker/filament/`. That fork
|
||||
uses `filament_flow_support: ["standard", "high_flow"]` to interpret paired
|
||||
values. Here the high-flow column is translated into ordinary single-valued
|
||||
filament overrides; the fork-specific keys and its profile restructuring are
|
||||
not imported. Companion temperature and pressure-advance enable settings are
|
||||
included. Machine and filament G-code remain inherited from this branch.
|
||||
|
||||
The 14 materials with upstream HF overrides are ABS, ASA, PETG HF, PETG Translucent, PETG-CF,
|
||||
PLA Full Spectrum, PLA Glow, PLA Matte, PLA Silk, PLA SnapSpeed, PLA
|
||||
Translucent, PLA Wood, PLA-CF and PVA. Upstream's renamed Support For PLA is
|
||||
not assumed equivalent to the local Breakaway formulation.
|
||||
|
||||
## Volumetric ceiling
|
||||
|
||||
All 141 HF filament presets explicitly set maximum volumetric speed to three
|
||||
times the fully inherited non-HF material value. Diameter-specific parents
|
||||
are used where available; Generic HF presets inherit the active Orca filament
|
||||
library's `@System` definitions, which are shared across diameters. The parent
|
||||
is recorded in `inherits`. This replaces both the upstream 0.4 mm HF ceiling
|
||||
and the earlier capped estimates.
|
||||
|
||||
The ceiling is a user-selected limit, not a measured hardware capability.
|
||||
Other process and machine limits still apply. Future changes to a parent
|
||||
preset's volumetric speed require updating its HF child; the multiplier is
|
||||
materialized in JSON, not evaluated by the slicer.
|
||||
|
||||
## Other material settings
|
||||
|
||||
The 24 additional HF material presets are **estimated starting points**, not
|
||||
manufacturer calibrations. They exist only where this branch already has a
|
||||
matching material and diameter. In particular, this does not make filled
|
||||
materials available to a 0.2 mm nozzle when no such standard profile exists.
|
||||
|
||||
For each material with a paired 0.4 mm standard/HF value:
|
||||
|
||||
- Flow ratio and pressure advance use the 0.4 mm HF/standard ratio,
|
||||
rounded to four decimal places. A zero standard value is not divided by.
|
||||
- Nozzle and initial-layer temperatures use the 0.4 mm HF-minus-standard
|
||||
difference, added to the diameter's original temperature.
|
||||
- Pressure advance follows the source's enable setting when its value is
|
||||
adjusted. Diameter-specific retraction and cooling settings are retained.
|
||||
- Missing, single-valued or `nil` comparisons leave the diameter's original
|
||||
setting intact.
|
||||
|
||||
For example, PLA SnapSpeed has standard volumetric limits of 2 mm^3/s at
|
||||
0.2 mm and 20 mm^3/s at 0.4, 0.6 and 0.8 mm. Its HF ceilings are therefore
|
||||
6 and 60 mm^3/s respectively. The other 103 HF material presets retain their
|
||||
standard parent's temperature, retraction, cooling and pressure-advance
|
||||
settings, changing only the volumetric ceiling and profile metadata.
|
||||
Each HF preset includes its baseline and ceiling in its filament notes.
|
||||
Tune the material settings for the actual nozzle, filament and temperature.
|
||||
|
||||
The separate preset design requires no C++ changes or new profile keys. It
|
||||
does not provide independent standard/HF selection per tool within one printer
|
||||
preset; a mixed hardware setup needs its own calibrated user preset.
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"24"
|
||||
"8"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon ASA-CF08 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"24"
|
||||
"8"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PA12-CF10 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"24"
|
||||
"8"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PA6-CF20 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"24"
|
||||
"8"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PA612-ESD @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
"12"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Fiberon PETG-ESD @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"24"
|
||||
"8"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Fiberon PPS-GF20 @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.2 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
"1"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
"12"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.6 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
"12"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.8 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
"12"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG @System: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PETG @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.2 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"60"
|
||||
"1"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"60"
|
||||
"16"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.6 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"60"
|
||||
"16"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.8 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"60"
|
||||
"16"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG HF @System: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Generic PETG HF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"34.5"
|
||||
"11"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG-CF @System: 11.5 x 3 = 34.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 11 mm^3/s, from Snorca standard preset Generic PETG-CF (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.6 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"34.5"
|
||||
"11.5"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG-CF @System: 11.5 x 3 = 34.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.8 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"34.5"
|
||||
"11.5"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PETG-CF @System: 11.5 x 3 = 34.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 11.5 mm^3/s, from Snorca standard preset Generic PETG-CF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.2 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
"1.6"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 1.6 mm^3/s, from Snorca standard preset Generic PLA @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
"12"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.6 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
"12"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.8 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
"12"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.2 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"54"
|
||||
"2"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"54"
|
||||
"18"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.6 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"54"
|
||||
"18"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.8 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"54"
|
||||
"18"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA High Speed @System: 18 x 3 = 54 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 18 mm^3/s, from Snorca standard preset Generic PLA High Speed @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.2 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"22.5"
|
||||
"2"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"22.5"
|
||||
"7.5"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.6 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"22.5"
|
||||
"7.5"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.8 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"22.5"
|
||||
"7.5"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA Silk @System: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 7.5 mm^3/s, from Snorca standard preset Generic PLA Silk @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
"12"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA-CF @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.6 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
"12"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA-CF @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.8 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
"12"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic PLA-CF @System: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Generic PLA-CF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9.6"
|
||||
"3.2"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic TPU @System: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.6 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9.6"
|
||||
"3.2"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic TPU @System: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.8 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"9.6"
|
||||
"3.2"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling is 3x Generic TPU @System: 3.2 x 3 = 9.6 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Uses the active Orca Generic material settings. Volumetric speed ceiling: 3.2 mm^3/s, from Snorca standard preset Generic TPU @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"60"
|
||||
"20"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma CoPE @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Celestial @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Galaxy @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Glow @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Luminous @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"60"
|
||||
"20"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma PLA Marble @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"60"
|
||||
"20"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma PLA Matte @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Metallic @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Neon @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"60"
|
||||
"20"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Panchroma PLA Satin @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
"12"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Panchroma PLA Silk @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Starlight @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Temp Shift @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA Translucent @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Panchroma PLA UV Shift @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"60"
|
||||
"20"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyLite CosPLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"22.5"
|
||||
"7.5"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.5 mm^3/s, from local standard fallback preset PolyLite PETG @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"22.5"
|
||||
"7.5"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 7.5 x 3 = 22.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 7.5 mm^3/s, from local standard fallback preset PolyLite PETG Translucent @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Galaxy @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Glow @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Luminous @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Neon @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Pro @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"60"
|
||||
"20"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyLite PLA Pro Metallic @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Starlight @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset PolyLite PLA Translucent @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"60"
|
||||
"20"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyTerra PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"60"
|
||||
"20"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyTerra PLA Marble @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"60"
|
||||
"20"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset PolyTerra PLA+ @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Polymaker General PLA Family @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker HT-PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker HT-PLA-GF @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PETG @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PETG Galaxy @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"60"
|
||||
"20"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 20 mm^3/s, from local standard fallback preset Polymaker PLA @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PLA Pro @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from local standard fallback preset Polymaker PLA Pro Metallic @Snapmaker U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
"12"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Silk PLA Family @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
"12"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from Snorca standard preset Polymaker Tough PLA Family @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -18,7 +18,7 @@
|
||||
"10"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"24"
|
||||
"22"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
@@ -45,6 +45,6 @@
|
||||
"280"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ABS @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,10 +9,10 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"93"
|
||||
"31"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 31 x 3 = 93 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 31 mm^3/s, from local standard fallback preset Snapmaker ABS Benchy @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
],
|
||||
"compatible_prints": [
|
||||
"0.25 Benchy @Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
|
||||
@@ -18,7 +18,7 @@
|
||||
"10"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"24"
|
||||
"22"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"15"
|
||||
@@ -45,6 +45,6 @@
|
||||
"0.02"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 22 mm^3/s, from Snorca HF preset Snapmaker ASA @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.2 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"1.5"
|
||||
"0.5"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 0.5 x 3 = 1.5 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 0.5 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1 0.2 nozzle; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
"12"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.6 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
"12"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1 0.6 nozzle; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.8 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
"12"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker Breakaway Support For PLA @U1 0.8 nozzle; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"24"
|
||||
"8"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 8 x 3 = 24 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 8 mm^3/s, from local standard fallback preset Snapmaker PA-CF @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"20.4"
|
||||
"6.8"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6.8 x 3 = 20.4 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 6.8 mm^3/s, from local standard fallback preset Snapmaker PET @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
"10"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 10 mm^3/s, from local standard fallback preset Snapmaker PETG @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,7 +9,7 @@
|
||||
"Snapmaker U1 (0.2 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
"2"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.955"
|
||||
@@ -24,6 +24,6 @@
|
||||
"1"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 1 x 3 = 3 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 2 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -21,7 +21,7 @@
|
||||
"0.955"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"48"
|
||||
"30"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"50"
|
||||
@@ -63,6 +63,6 @@
|
||||
"0.035"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 30 mm^3/s, from Snorca HF preset Snapmaker PETG HF (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,7 +9,7 @@
|
||||
"Snapmaker U1 (0.6 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"60"
|
||||
"20"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.955"
|
||||
@@ -24,6 +24,6 @@
|
||||
"1"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,7 +9,7 @@
|
||||
"Snapmaker U1 (0.8 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"60"
|
||||
"20"
|
||||
],
|
||||
"filament_flow_ratio": [
|
||||
"0.955"
|
||||
@@ -24,6 +24,6 @@
|
||||
"1"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 20 x 3 = 60 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 20 mm^3/s, from Snorca standard preset Snapmaker PETG HF @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -15,9 +15,9 @@
|
||||
"1"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 1 x 3 = 3 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Estimated 0.2 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 1 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.2 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"3"
|
||||
"1"
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -15,9 +15,9 @@
|
||||
"0.05"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 10 x 3 = 30 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 10 mm^3/s, from Snorca HF preset Snapmaker PETG Translucent @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"30"
|
||||
"10"
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -15,9 +15,9 @@
|
||||
"1"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Estimated 0.6 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.6 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"48"
|
||||
"16"
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -15,9 +15,9 @@
|
||||
"1"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 16 x 3 = 48 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Estimated 0.8 mm high-flow starting values, not manufacturer-calibrated. Flow ratio and pressure advance use this diameter's standard values times the material's 0.4 mm HF/standard ratio from snorca/main b1831e5dcb. Temperature uses the 0.4 mm HF-standard difference. Retraction and cooling remain diameter-specific. Volumetric speed ceiling: 16 mm^3/s, from Snorca standard preset Snapmaker PETG Translucent @U1 0.8 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"48"
|
||||
"16"
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -24,7 +24,7 @@
|
||||
"1.01"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"19.2"
|
||||
"18"
|
||||
],
|
||||
"filament_minimal_purge_on_wipe_tower": [
|
||||
"30"
|
||||
@@ -60,6 +60,6 @@
|
||||
"0.028"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 6.4 x 3 = 19.2 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 18 mm^3/s, from Snorca HF preset Snapmaker PETG-CF @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"42"
|
||||
"14"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 14 x 3 = 42 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 14 mm^3/s, from local standard fallback preset Snapmaker PLA @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 15 mm^3/s, from Snorca standard preset Snapmaker PLA Basic @U1 (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -9,9 +9,9 @@
|
||||
"Snapmaker U1 (0.4 High Flow nozzle)"
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"36"
|
||||
"12"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 12 x 3 = 36 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Other material settings are inherited from the matching standard-nozzle preset. Volumetric speed ceiling: 12 mm^3/s, from local standard fallback preset Snapmaker PLA Eco @U1; no matching Snorca U1 material/nozzle profile. No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
]
|
||||
}
|
||||
|
||||
+2
-2
@@ -24,9 +24,9 @@
|
||||
"0.024"
|
||||
],
|
||||
"filament_notes": [
|
||||
"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling is 3x the inherited non-HF value for this diameter: 15 x 3 = 45 mm^3/s. This is a configured ceiling, not measured nozzle throughput. Calibrate for your nozzle and filament."
|
||||
"Temperature, flow ratio, pressure advance and other high-flow overrides are based on Snapmaker OrcaSlicer snorca/main b1831e5dcb for 0.4 mm nozzles. Volumetric speed ceiling: 15 mm^3/s, from Snorca HF preset Snapmaker PLA Full Spectrum @U1 0.4 nozzle (snorca/main b1831e5dcb). No multiplier or cross-material extrapolation is applied. Calibrate for your nozzle and filament."
|
||||
],
|
||||
"filament_max_volumetric_speed": [
|
||||
"45"
|
||||
"15"
|
||||
]
|
||||
}
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user