juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-18 19:12:17 +00:00
Code Issues Packages Projects Releases Wiki Activity

Updated Wiki content

OrcaSlicerBot
2025-12-30 16:30:32 +00:00
parent 5ca7ce561e
commit afe2c3a417
1 changed files with 10 additions and 2 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
printer_settings/basic information/printer_basic_information_advanced.md

@@ -55,8 +55,16 @@ Enable this to enable the camera on printer to check the quality of first layer.
## Power Loss Recovery
Enable power loss recovery by inserting commands in generated G-code.
Only for [Bambu Lab](https://wiki.bambulab.com/en/knowledge-sharing/power-loss-recovery) or [Marlin 2 firmware](https://marlinfw.org/docs/gcode/M413.html) based printers.
Enable or Disable power loss recovery by inserting commands in generated G-code.
Set `Printer configuration` to use the current printer's power loss recovery configuration.
> [!NOTE]
> Only for [Bambu Lab](https://wiki.bambulab.com/en/knowledge-sharing/power-loss-recovery) or [Marlin 2 firmware](https://marlinfw.org/docs/gcode/M413.html) based printers.
Power loss recovery saves the current execution point to non-volatile memory (SD card) but this can introduce some issues:
- When the slicer generates many short moves (e.g. curves), frequent save/read operations can introduce pauses that may leave blobs.
- Repeated writes also increase wear on the memory device and its Terabytes Written (TBW).
> [!TIP]
> If enabled, it's recommended to enable [Arc fitting](quality_settings_precision#arc-fitting) in `Quality Settings > Precision` to reduce the number of G-code commands.