juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-24 21:55:14 +00:00
Code Issues Packages Projects Releases Wiki Activity

Updated Wiki content

OrcaSlicerBot
2025-12-12 15:41:30 +00:00
parent 91a6acee4d
commit 6ad6e4853e
1 changed files with 12 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
printer_settings/basic information/printer_basic_information_advanced.md

@@ -7,6 +7,7 @@ Advanced settings related to the printer configuration.
- [Pellet Modded Printer](#pellet-modded-printer) - [Pellet Modded Printer](#pellet-modded-printer)
- [Use 3rd-party print host](#use-3rd-party-print-host) - [Use 3rd-party print host](#use-3rd-party-print-host)
- [Scan first layer](#scan-first-layer) - [Scan first layer](#scan-first-layer)
- [Power Loss Recovery](#power-loss-recovery)
- [Disable set remaining print time](#disable-set-remaining-print-time) - [Disable set remaining print time](#disable-set-remaining-print-time)
- [G-code thumbnails](#g-code-thumbnails) - [G-code thumbnails](#g-code-thumbnails)
- [Use relative E distances](#use-relative-e-distances) - [Use relative E distances](#use-relative-e-distances)
@@ -52,6 +53,17 @@ Allow controlling BambuLab's printer through 3rd party print hosts.
Enable this to enable the camera on printer to check the quality of first layer. Enable this to enable the camera on printer to check the quality of first layer.
## Power Loss Recovery
Enable power loss recovery by inserting commands in generated G-code.
Only for [Bambu Lab](https://wiki.bambulab.com/en/knowledge-sharing/power-loss-recovery) or [Marlin 2 firmware](https://marlinfw.org/docs/gcode/M413.html) based printers.
> [!TIP]
> If enabled, it's recommended to enable [Arc fitting](quality_settings_precision#arc-fitting) in `Quality Settings > Precision` to reduce the number of G-code commands.
> [!CAUTION]
> High warping models or materials will not be recovered properly due to bed adhesion loss after power-off.
## Disable set remaining print time ## Disable set remaining print time
Disable generating of the M73: Set remaining print time in the final G-code. Disable generating of the M73: Set remaining print time in the final G-code.