juli/OrcaSlicer
1
1
Fork 0
mirror of https://github.com/OrcaSlicer/OrcaSlicer.git synced 2026-05-24 21:55:14 +00:00
Code Issues Packages Projects Releases Wiki Activity

Updated Wiki content

OrcaSlicerBot
2025-12-12 15:41:30 +00:00
parent 91a6acee4d
commit 6ad6e4853e
1 changed files with 12 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

12
printer_settings/basic information/printer_basic_information_advanced.md

@@ -7,6 +7,7 @@ Advanced settings related to the printer configuration.
- [Pellet Modded Printer](#pellet-modded-printer)
- [Use 3rd-party print host](#use-3rd-party-print-host)
- [Scan first layer](#scan-first-layer)
- [Power Loss Recovery](#power-loss-recovery)
- [Disable set remaining print time](#disable-set-remaining-print-time)
- [G-code thumbnails](#g-code-thumbnails)
- [Use relative E distances](#use-relative-e-distances)
@@ -52,6 +53,17 @@ Allow controlling BambuLab's printer through 3rd party print hosts.
Enable this to enable the camera on printer to check the quality of first layer.
## Power Loss Recovery
Enable power loss recovery by inserting commands in generated G-code.
Only for [Bambu Lab](https://wiki.bambulab.com/en/knowledge-sharing/power-loss-recovery) or [Marlin 2 firmware](https://marlinfw.org/docs/gcode/M413.html) based printers.
> [!TIP]
> If enabled, it's recommended to enable [Arc fitting](quality_settings_precision#arc-fitting) in `Quality Settings > Precision` to reduce the number of G-code commands.
> [!CAUTION]
> High warping models or materials will not be recovered properly due to bed adhesion loss after power-off.
## Disable set remaining print time
Disable generating of the M73: Set remaining print time in the final G-code.