mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-15 11:51:33 +00:00
SoftFever
55a3114ec9
Phase 2 completion - Volumic, Ratrig, Chuanying, Afinia, Eryone, FLSun, Tiertime, Blocks, CONSTRUCT3D, Co Print, CoLiDo, DeltaMaker, Ginger Additive, OrcaArena, Peopoly, Wanhao France, iQ. All are P1 copy-paste or small structural fixes; owners keep their ids by Bambu-catalog/OFL/historic- introducer precedence, impostor families get fresh deterministic mints, zero effective-config change: - Volumic 10 mints (ABS/ASA/PP, PETG/PCTG/ESD, PLA/UNIVERSAL, PA/PPS lines); Ratrig 10 (BigNozzle/PunkFil lines off the Generic line's ids); Chuanying 8 (plus 3 redundant own-id lines removed so parents' minted ids flow to the 0.25-nozzle variants); FLSun 4 (S1/T1 High Speed + Silk); Peopoly 4 (Lancer lines off Generic PLA's GFL99); Afinia 3 (Value PLA/ABS+/Value ABS inside the frozen GFx##_## scheme); Co Print 3 (ABS/PETG/TPU off GFL99). - Tiertime: Generic SBS had copy-pasted Generic PLA's ids on both printer lines - one family mint on both variants collapses the split. Eryone: PP copy-pasted PETG-CF's EFL43 (same introducing commit) - PP minted. Blocks: ASA-CF copy-pasted PLA-CF's BSFI010 - ASA-CF minted. CONSTRUCT3D: High Flow PETG minted off GFG99. CoLiDo: both claimants of the invented GFA99 re-minted. DeltaMaker: Brand PLA minted off GFL99. OrcaArena: Generic PLA Silk minted; the Bambu-clone Arena PLA Silk keeps GFA05 (catalog precedence). iQ: Grauts HPP4GF25 minted off Fiberthree's IQM1. - Ginger Additive (P5): the shared fdm_filament_common template carried P510eff9; moved onto the two pellet families (Generic PETG keeps it as first claimant, Generic PLA minted), template key removed after verifying every inheritor still resolves an id. - Wanhao France (P4): YUMI PLA Bowden stops over-claiming the six direct-drive printers covered by YUMI PLA Direct Drive (trim only, no mints). Verified: config-equivalence gate zero unexpected diffs; extra check exit 0; --check exit 0; validator -l 2 exit 0; and with all 30 vendor migrations now applied, the extended validator's -f check is clean TREE-WIDE (0 ambiguity errors, down from 1256 baseline / 16448 with the library-aware extension); -r exit 0 for BBL and Qidi.
253 lines
4.1 KiB
JSON
253 lines
4.1 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "fdm_filament_common",
|
|
"from": "system",
|
|
"instantiation": "false",
|
|
"activate_air_filtration": [
|
|
"0"
|
|
],
|
|
"activate_chamber_temp_control": [
|
|
"0"
|
|
],
|
|
"additional_cooling_fan_speed": [
|
|
"70"
|
|
],
|
|
"chamber_temperature": [
|
|
"0"
|
|
],
|
|
"close_fan_the_first_x_layers": [
|
|
"1"
|
|
],
|
|
"compatible_printers": [
|
|
"Ginger G1 1.2 nozzle",
|
|
"Ginger G1 3.0 nozzle",
|
|
"Ginger G1 5.0 nozzle",
|
|
"Ginger G1 8.0 nozzle"
|
|
],
|
|
"compatible_printers_condition": "",
|
|
"compatible_prints": [],
|
|
"compatible_prints_condition": "",
|
|
"complete_print_exhaust_fan_speed": [
|
|
"70"
|
|
],
|
|
"cool_plate_temp": [
|
|
"35"
|
|
],
|
|
"cool_plate_temp_initial_layer": [
|
|
"35"
|
|
],
|
|
"default_filament_colour": [
|
|
""
|
|
],
|
|
"during_print_exhaust_fan_speed": [
|
|
"70"
|
|
],
|
|
"enable_overhang_bridge_fan": [
|
|
"1"
|
|
],
|
|
"enable_pressure_advance": [
|
|
"0"
|
|
],
|
|
"eng_plate_temp": [
|
|
"0"
|
|
],
|
|
"eng_plate_temp_initial_layer": [
|
|
"0"
|
|
],
|
|
"fan_cooling_layer_time": [
|
|
"60"
|
|
],
|
|
"fan_max_speed": [
|
|
"0"
|
|
],
|
|
"fan_min_speed": [
|
|
"0"
|
|
],
|
|
"filament_cooling_final_speed": [
|
|
"3.4"
|
|
],
|
|
"filament_cooling_initial_speed": [
|
|
"2.2"
|
|
],
|
|
"filament_cooling_moves": [
|
|
"4"
|
|
],
|
|
"filament_cost": [
|
|
"5"
|
|
],
|
|
"filament_density": [
|
|
"1.24"
|
|
],
|
|
"filament_deretraction_speed": [
|
|
"nil"
|
|
],
|
|
"filament_diameter": [
|
|
"1.12838"
|
|
],
|
|
"filament_end_gcode": [
|
|
"; filament end gcode \nM106 P3 S0\n"
|
|
],
|
|
"filament_flow_ratio": [
|
|
"1"
|
|
],
|
|
"filament_is_support": [
|
|
"0"
|
|
],
|
|
"filament_load_time": [
|
|
"0"
|
|
],
|
|
"filament_loading_speed": [
|
|
"28"
|
|
],
|
|
"filament_loading_speed_start": [
|
|
"3"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"300"
|
|
],
|
|
"filament_minimal_purge_on_wipe_tower": [
|
|
"15"
|
|
],
|
|
"filament_multitool_ramming": [
|
|
"0"
|
|
],
|
|
"filament_multitool_ramming_flow": [
|
|
"10"
|
|
],
|
|
"filament_multitool_ramming_volume": [
|
|
"10"
|
|
],
|
|
"filament_notes": [
|
|
""
|
|
],
|
|
"filament_ramming_parameters": [
|
|
"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
|
|
],
|
|
"filament_retract_before_wipe": [
|
|
"nil"
|
|
],
|
|
"filament_retract_lift_above": [
|
|
"nil"
|
|
],
|
|
"filament_retract_lift_below": [
|
|
"nil"
|
|
],
|
|
"filament_retract_lift_enforce": [
|
|
"nil"
|
|
],
|
|
"filament_retract_restart_extra": [
|
|
"nil"
|
|
],
|
|
"filament_retract_when_changing_layer": [
|
|
"nil"
|
|
],
|
|
"filament_retraction_length": [
|
|
"nil"
|
|
],
|
|
"filament_retraction_minimum_travel": [
|
|
"nil"
|
|
],
|
|
"filament_retraction_speed": [
|
|
"nil"
|
|
],
|
|
"filament_settings_id": [
|
|
"Ginger Filaments Common"
|
|
],
|
|
"filament_shrink": [
|
|
"100%"
|
|
],
|
|
"filament_soluble": [
|
|
"0"
|
|
],
|
|
"filament_start_gcode": [
|
|
"; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S255\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S180\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
|
],
|
|
"filament_toolchange_delay": [
|
|
"0"
|
|
],
|
|
"filament_unload_time": [
|
|
"0"
|
|
],
|
|
"filament_unloading_speed": [
|
|
"90"
|
|
],
|
|
"filament_unloading_speed_start": [
|
|
"100"
|
|
],
|
|
"filament_vendor": [
|
|
"Generic"
|
|
],
|
|
"filament_wipe": [
|
|
"nil"
|
|
],
|
|
"filament_wipe_distance": [
|
|
"nil"
|
|
],
|
|
"filament_z_hop": [
|
|
"nil"
|
|
],
|
|
"filament_z_hop_types": [
|
|
"nil"
|
|
],
|
|
"full_fan_speed_layer": [
|
|
"0"
|
|
],
|
|
"hot_plate_temp": [
|
|
"1"
|
|
],
|
|
"hot_plate_temp_initial_layer": [
|
|
"60"
|
|
],
|
|
"nozzle_temperature": [
|
|
"220"
|
|
],
|
|
"nozzle_temperature_initial_layer": [
|
|
"220"
|
|
],
|
|
"nozzle_temperature_range_high": [
|
|
"240"
|
|
],
|
|
"nozzle_temperature_range_low": [
|
|
"190"
|
|
],
|
|
"overhang_fan_speed": [
|
|
"100"
|
|
],
|
|
"overhang_fan_threshold": [
|
|
"50%"
|
|
],
|
|
"pressure_advance": [
|
|
"0.4"
|
|
],
|
|
"reduce_fan_stop_start_freq": [
|
|
"0"
|
|
],
|
|
"required_nozzle_HRC": [
|
|
"0"
|
|
],
|
|
"slow_down_for_layer_cooling": [
|
|
"1"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"30"
|
|
],
|
|
"slow_down_min_speed": [
|
|
"20"
|
|
],
|
|
"support_material_interface_fan_speed": [
|
|
"-1"
|
|
],
|
|
"temperature_vitrification": [
|
|
"55"
|
|
],
|
|
"textured_plate_temp": [
|
|
"55"
|
|
],
|
|
"textured_plate_temp_initial_layer": [
|
|
"55"
|
|
],
|
|
"pellet_flow_coefficient": [
|
|
"1"
|
|
]
|
|
}
|