Long-tail vendors: family filament_ids (17 vendors, 41 collision groups)

Phase 2 completion - Volumic, Ratrig, Chuanying, Afinia, Eryone, FLSun, Tiertime, Blocks, CONSTRUCT3D, Co Print, CoLiDo, DeltaMaker, Ginger Additive, OrcaArena, Peopoly, Wanhao France, iQ. All are P1 copy-paste or small structural fixes; owners keep their ids by Bambu-catalog/OFL/historic- introducer precedence, impostor families get fresh deterministic mints, zero effective-config change: - Volumic 10 mints (ABS/ASA/PP, PETG/PCTG/ESD, PLA/UNIVERSAL, PA/PPS lines); Ratrig 10 (BigNozzle/PunkFil lines off the Generic line's ids); Chuanying 8 (plus 3 redundant own-id lines removed so parents' minted ids flow to the 0.25-nozzle variants); FLSun 4 (S1/T1 High Speed + Silk); Peopoly 4 (Lancer lines off Generic PLA's GFL99); Afinia 3 (Value PLA/ABS+/Value ABS inside the frozen GFx##_## scheme); Co Print 3 (ABS/PETG/TPU off GFL99). - Tiertime: Generic SBS had copy-pasted Generic PLA's ids on both printer lines - one family mint on both variants collapses the split. Eryone: PP copy-pasted PETG-CF's EFL43 (same introducing commit) - PP minted. Blocks: ASA-CF copy-pasted PLA-CF's BSFI010 - ASA-CF minted. CONSTRUCT3D: High Flow PETG minted off GFG99. CoLiDo: both claimants of the invented GFA99 re-minted. DeltaMaker: Brand PLA minted off GFL99. OrcaArena: Generic PLA Silk minted; the Bambu-clone Arena PLA Silk keeps GFA05 (catalog precedence). iQ: Grauts HPP4GF25 minted off Fiberthree's IQM1. - Ginger Additive (P5): the shared fdm_filament_common template carried P510eff9; moved onto the two pellet families (Generic PETG keeps it as first claimant, Generic PLA minted), template key removed after verifying every inheritor still resolves an id. - Wanhao France (P4): YUMI PLA Bowden stops over-claiming the six direct-drive printers covered by YUMI PLA Direct Drive (trim only, no mints). Verified: config-equivalence gate zero unexpected diffs; extra check exit 0; --check exit 0; validator -l 2 exit 0; and with all 30 vendor migrations now applied, the extended validator's -f check is clean TREE-WIDE (0 ambiguity errors, down from 1256 baseline / 16448 with the library-aware extension); -r exit 0 for BBL and Qidi.
2026-08-25 02:47:46 +00:00 · 2026-07-03 00:16:01 +08:00
parent ee125975cf
commit 55a3114ec9
60 changed files with 227 additions and 125 deletions
--- a/resources/profiles/Afinia/filament/Afinia
+++ b/resources/profiles/Afinia/filament/Afinia
@@ -1,6 +1,6 @@
 {
 	"type": "filament",
-	"filament_id": "GFB00_01",
+	"filament_id": "OFYG2Gfy",
 	"setting_id": "wAJTMxtCY7EoavRi",
 	"name": "Afinia ABS+@HS",
 	"from": "system",
--- a/resources/profiles/Afinia/filament/Afinia
+++ b/resources/profiles/Afinia/filament/Afinia
@@ -1,6 +1,6 @@
 {
 	"type": "filament",
-	"filament_id": "GFB00_01",
+	"filament_id": "OFuYvNS3",
 	"setting_id": "OxIiEYjbhEvSykaQ",
 	"name": "Afinia Value ABS@HS",
 	"from": "system",
--- a/resources/profiles/Afinia/filament/Afinia
+++ b/resources/profiles/Afinia/filament/Afinia
@@ -1,6 +1,6 @@
 {
 	"type": "filament",
-	"filament_id": "GFA00_01",
+	"filament_id": "OFvw0owy",
 	"setting_id": "BASsUdyvElEVJ9AA",
 	"name": "Afinia Value PLA@HS",
 	"from": "system",
--- a/resources/profiles/Blocks/filament/Blocks
+++ b/resources/profiles/Blocks/filament/Blocks
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_asa",
 	"from": "system",
 	"setting_id": "FF6D7i492XTrb8AO",
-	"filament_id": "BSFI010",
+	"filament_id": "OFy7oQ1g",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.95"
--- a/resources/profiles/CONSTRUCT3D/filament/C1
+++ b/resources/profiles/CONSTRUCT3D/filament/C1
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pet",
 	"from": "system",
 	"setting_id": "3IxBZSWFfFGmKAQ7",
-	"filament_id": "GFG99",
+	"filament_id": "OFAUX5fB",
 	"instantiation": "true",
 	"reduce_fan_stop_start_freq": [
 		"1"
--- a/resources/profiles/Chuanying/filament/Chuanying
+++ b/resources/profiles/Chuanying/filament/Chuanying
@@ -4,7 +4,6 @@
 	"inherits": "Chuanying Generic ASA",
 	"from": "system",
 	"setting_id": "px1EPCDgOG8eE81V",
-	"filament_id": "GFL99",
 	"instantiation": "true",
 	"compatible_printers": [
 		"Chuanying X1 0.25 Nozzle"
--- a/resources/profiles/Chuanying/filament/Chuanying
+++ b/resources/profiles/Chuanying/filament/Chuanying
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_asa",
 	"from": "system",
 	"setting_id": "wBBQiy8JV2LrnIav",
-	"filament_id": "GFL99",
+	"filament_id": "OF7tgL9c",
 	"instantiation": "true",
 	"additional_cooling_fan_speed": [
 		"0"
--- a/resources/profiles/Chuanying/filament/Chuanying
+++ b/resources/profiles/Chuanying/filament/Chuanying
@@ -4,7 +4,7 @@
 	"inherits": "Chuanying Generic ABS",
 	"from": "system",
 	"setting_id": "bBNozld07rP6mV3d",
-	"filament_id": "GFB99",
+	"filament_id": "OFzQQeCi",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"0"
--- a/resources/profiles/Chuanying/filament/Chuanying
+++ b/resources/profiles/Chuanying/filament/Chuanying
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "YZT1Uv73b8ArVoX3",
-	"filament_id": "GFL99",
+	"filament_id": "OFfiN1Lw",
 	"instantiation": "true",
 	"bed_temperature_difference": [
 		"10"
--- a/resources/profiles/Chuanying/filament/Chuanying
+++ b/resources/profiles/Chuanying/filament/Chuanying
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pet",
 	"from": "system",
 	"setting_id": "S2vCGI7sqN8FwodT",
-	"filament_id": "GFG99",
+	"filament_id": "OF3YOOOs",
 	"instantiation": "true",
 	"additional_cooling_fan_speed": [
 		"100"
--- a/resources/profiles/Chuanying/filament/Chuanying
+++ b/resources/profiles/Chuanying/filament/Chuanying
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "EZA59VPwew1cpyUJ",
-	"filament_id": "GFL99",
+	"filament_id": "OFxVzzn4",
 	"instantiation": "true",
 	"additional_cooling_fan_speed": [
 		"100"
--- a/resources/profiles/Chuanying/filament/Chuanying
+++ b/resources/profiles/Chuanying/filament/Chuanying
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "M9wzNVOPRQlayQH1",
-	"filament_id": "GFL99",
+	"filament_id": "OFlN56xW",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"1"
--- a/resources/profiles/Chuanying/filament/Chuanying
+++ b/resources/profiles/Chuanying/filament/Chuanying
@@ -4,7 +4,7 @@
 	"inherits": "Chuanying Generic PLA",
 	"from": "system",
 	"setting_id": "ePZFnkgBiyFuKvji",
-	"filament_id": "GFB99",
+	"filament_id": "OFQ5xAKf",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"0"
--- a/resources/profiles/Chuanying/filament/Chuanying
+++ b/resources/profiles/Chuanying/filament/Chuanying
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_tpu",
 	"from": "system",
 	"setting_id": "HYciEf4160uMYGnH",
-	"filament_id": "GFG99",
+	"filament_id": "OFUqBrgf",
 	"instantiation": "true",
 	"additional_cooling_fan_speed": [
 		"100"
--- a/resources/profiles/Chuanying/filament/Chuanying
+++ b/resources/profiles/Chuanying/filament/Chuanying
@@ -4,7 +4,6 @@
 	"inherits": "Chuanying Generic HS PLA",
 	"from": "system",
 	"setting_id": "CAdli5S8JIFafvRG",
-	"filament_id": "GFL99",
 	"instantiation": "true",
 	"compatible_printers": [
 		"Chuanying X1 0.25 Nozzle"
--- a/resources/profiles/Chuanying/filament/Chuanying
+++ b/resources/profiles/Chuanying/filament/Chuanying
@@ -4,7 +4,6 @@
 	"inherits": "Chuanying Generic PLA-Silk",
 	"from": "system",
 	"setting_id": "kph5feBjhPi0oo0G",
-	"filament_id": "GFL99",
 	"instantiation": "true",
 	"compatible_printers": [
 		"Chuanying X1 0.25 Nozzle"
--- a/Print/filament/CoPrint
+++ b/Print/filament/CoPrint
@@ -4,7 +4,7 @@
 	"inherits": "CoPrint Generic PLA",
 	"from": "system",
 	"setting_id": "xW2rHuxT9o7MG8qB",
-	"filament_id": "GFL99",
+	"filament_id": "OFNvrbnf",
 	"instantiation": "true",
 	"close_fan_the_first_x_layers": [
 		"3"
--- a/Print/filament/CoPrint
+++ b/Print/filament/CoPrint
@@ -4,7 +4,7 @@
 	"inherits": "CoPrint Generic PLA",
 	"from": "system",
 	"setting_id": "k4m484S1samBGEVb",
-	"filament_id": "GFL99",
+	"filament_id": "OFDramZ2",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"90"
--- a/Print/filament/CoPrint
+++ b/Print/filament/CoPrint
@@ -4,7 +4,7 @@
 	"inherits": "CoPrint Generic PLA",
 	"from": "system",
 	"setting_id": "2mWqeih012I5D2CK",
-	"filament_id": "GFL99",
+	"filament_id": "OF2Psxdc",
 	"instantiation": "true",
 	"fan_max_speed": [
 		"80"
--- a/resources/profiles/CoLiDo/filament/CoLiDo
+++ b/resources/profiles/CoLiDo/filament/CoLiDo
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "Gj0o6Rmn4qWXDLov",
-	"filament_id": "GFA99",
+	"filament_id": "OFfoA8kJ",
 	"instantiation": "true",
 	"filament_vendor": [
 		"CoLiDo"
--- a/resources/profiles/CoLiDo/filament/CoLiDo
+++ b/resources/profiles/CoLiDo/filament/CoLiDo
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "mLgBNw0OzvJSS8IG",
-	"filament_id": "GFA99",
+	"filament_id": "OFxlch4V",
 	"instantiation": "true",
 	"filament_vendor": [
 		"CoLiDo"
--- a/resources/profiles/DeltaMaker/filament/DeltaMaker
+++ b/resources/profiles/DeltaMaker/filament/DeltaMaker
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "bvZOHe5ejWqBALPQ",
-	"filament_id": "GFL99",
+	"filament_id": "OFxodd2u",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.987"
--- a/resources/profiles/Eryone/filament/Eryone
+++ b/resources/profiles/Eryone/filament/Eryone
@@ -4,7 +4,7 @@
 	"inherits": "Eryone Standard PLA",
 	"from": "system",
 	"setting_id": "sZF6qOPqqu88Yu5e",
-	"filament_id": "EFL43",
+	"filament_id": "OFf0JIqs",
 	"instantiation": "true",
 	"compatible_printers": [
 		"Thinker X400 0.4 nozzle"
--- a/resources/profiles/FLSun/filament/FLSun
+++ b/resources/profiles/FLSun/filament/FLSun
@@ -4,7 +4,7 @@
 	"inherits": "FLSun Generic PLA",
 	"from": "system",
 	"setting_id": "v2clpNXXo8m6dV33",
-	"filament_id": "GFL99",
+	"filament_id": "OFR8dTVW",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"
--- a/resources/profiles/FLSun/filament/FLSun
+++ b/resources/profiles/FLSun/filament/FLSun
@@ -4,7 +4,7 @@
 	"inherits": "FLSun Generic PLA",
 	"from": "system",
 	"setting_id": "164Bn4YchxJAaLsa",
-	"filament_id": "GFL99",
+	"filament_id": "OFFenwbU",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"
--- a/resources/profiles/FLSun/filament/FLSun
+++ b/resources/profiles/FLSun/filament/FLSun
@@ -4,7 +4,7 @@
 	"inherits": "FLSun Generic PLA",
 	"from": "system",
 	"setting_id": "E4lpSLLlAxUW04ik",
-	"filament_id": "GFL99",
+	"filament_id": "OFyt23xJ",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"
--- a/resources/profiles/FLSun/filament/FLSun
+++ b/resources/profiles/FLSun/filament/FLSun
@@ -4,7 +4,7 @@
 	"inherits": "FLSun Generic PLA",
 	"from": "system",
 	"setting_id": "gElUb4GnCoEfVlEd",
-	"filament_id": "GFL99",
+	"filament_id": "OFt1YdX8",
 	"instantiation": "true",
 	"activate_air_filtration": [
 		"1"
--- a/resources/profiles/Ginger
+++ b/resources/profiles/Ginger
@@ -5,6 +5,7 @@
 	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "ue95N2e65rdp5K6c",
+	"filament_id": "P510eff9",
 	"instantiation": "true",
 	"filament_vendor": [
 		"Generic"
--- a/resources/profiles/Ginger
+++ b/resources/profiles/Ginger
@@ -5,6 +5,7 @@
 	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "Z1scjKDBFoDaTa2C",
+	"filament_id": "OFziUL2X",
 	"instantiation": "true",
 	"filament_vendor": [
 		"Generic"
--- a/Additive/filament/fdm_filament_common.json
+++ b/Additive/filament/fdm_filament_common.json
@@ -2,7 +2,6 @@
 	"type": "filament",
 	"name": "fdm_filament_common",
 	"from": "system",
-	"filament_id": "P510eff9",
 	"instantiation": "false",
 	"activate_air_filtration": [
 		"0"
--- a/resources/profiles/OrcaArena/filament/OrcaArena
+++ b/resources/profiles/OrcaArena/filament/OrcaArena
@@ -3,7 +3,7 @@
 	"name": "OrcaArena Generic PLA Silk @base",
 	"inherits": "fdm_filament_pla",
 	"from": "system",
-	"filament_id": "GFA05",
+	"filament_id": "OFqSTJ3I",
 	"instantiation": "false",
 	"filament_flow_ratio": [
 		"0.98"
--- a/resources/profiles/Peopoly/filament/Peopoly
+++ b/resources/profiles/Peopoly/filament/Peopoly
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_abs",
 	"from": "system",
 	"setting_id": "ufcIVt3x0FqV69h4",
-	"filament_id": "GFL99",
+	"filament_id": "OFqkcvDI",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.91"
--- a/resources/profiles/Peopoly/filament/Peopoly
+++ b/resources/profiles/Peopoly/filament/Peopoly
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_abs",
 	"from": "system",
 	"setting_id": "xSaZKOpjStJuKiM7",
-	"filament_id": "GFL99",
+	"filament_id": "OFlzQ0IS",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.90"
--- a/resources/profiles/Peopoly/filament/Peopoly
+++ b/resources/profiles/Peopoly/filament/Peopoly
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_petg",
 	"from": "system",
 	"setting_id": "aUX6OHQrKPghlPBb",
-	"filament_id": "GFL99",
+	"filament_id": "OFV1szQh",
 	"instantiation": "true",
 	"fan_cooling_layer_time": [
 		"20"
--- a/resources/profiles/Peopoly/filament/Peopoly
+++ b/resources/profiles/Peopoly/filament/Peopoly
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "EFHW4uKJCsBCjAEU",
-	"filament_id": "GFL99",
+	"filament_id": "OF9tjFbj",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.92"
--- a/resources/profiles/Ratrig/filament/RatRig
+++ b/resources/profiles/Ratrig/filament/RatRig
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_abs",
 	"from": "system",
 	"setting_id": "oE39mwr3PCpeBxZN",
-	"filament_id": "GFB99",
+	"filament_id": "OFtcTs1o",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.94"
--- a/resources/profiles/Ratrig/filament/RatRig
+++ b/resources/profiles/Ratrig/filament/RatRig
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_asa",
 	"from": "system",
 	"setting_id": "GGkbwdd79jAXnwuf",
-	"filament_id": "GFB98",
+	"filament_id": "OFSkBwxf",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.92"
--- a/resources/profiles/Ratrig/filament/RatRig
+++ b/resources/profiles/Ratrig/filament/RatRig
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pet",
 	"from": "system",
 	"setting_id": "uCKZhFAPvEa2wKnA",
-	"filament_id": "GFC99",
+	"filament_id": "OFS1ekCg",
 	"instantiation": "true",
 	"reduce_fan_stop_start_freq": [
 		"1"
--- a/resources/profiles/Ratrig/filament/RatRig
+++ b/resources/profiles/Ratrig/filament/RatRig
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pet",
 	"from": "system",
 	"setting_id": "bf3YMNVRSE1i1E8N",
-	"filament_id": "GFG99",
+	"filament_id": "OFjj9Yiz",
 	"instantiation": "true",
 	"reduce_fan_stop_start_freq": [
 		"1"
--- a/resources/profiles/Ratrig/filament/RatRig
+++ b/resources/profiles/Ratrig/filament/RatRig
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pla",
 	"from": "system",
 	"setting_id": "dyG3zLuhX2qe8XJP",
-	"filament_id": "GFL99",
+	"filament_id": "OF7M9vy4",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.94"
--- a/resources/profiles/Ratrig/filament/RatRig
+++ b/resources/profiles/Ratrig/filament/RatRig
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_tpu",
 	"from": "system",
 	"setting_id": "wLJ3X05Jnz1EqeOI",
-	"filament_id": "GFL99",
+	"filament_id": "OFYehFGr",
 	"instantiation": "true",
 	"filament_max_volumetric_speed": [
 		"5"
--- a/resources/profiles/Ratrig/filament/RatRig
+++ b/resources/profiles/Ratrig/filament/RatRig
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pet",
 	"from": "system",
 	"setting_id": "SG4Gt87iS1ql3s8S",
-	"filament_id": "GFC99",
+	"filament_id": "OFzb2BLs",
 	"instantiation": "true",
 	"reduce_fan_stop_start_freq": [
 		"1"
--- a/resources/profiles/Ratrig/filament/RatRig
+++ b/resources/profiles/Ratrig/filament/RatRig
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_abs",
 	"from": "system",
 	"setting_id": "AzjpmeEXD6enWOG6",
-	"filament_id": "GFB99",
+	"filament_id": "OFL7U2MV",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.92"
--- a/resources/profiles/Ratrig/filament/RatRig
+++ b/resources/profiles/Ratrig/filament/RatRig
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pet",
 	"from": "system",
 	"setting_id": "o2dP6EwooarikQ8R",
-	"filament_id": "GFB99",
+	"filament_id": "OFXQX0tr",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.93"
--- a/resources/profiles/Ratrig/filament/RatRig
+++ b/resources/profiles/Ratrig/filament/RatRig
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_pet",
 	"from": "system",
 	"setting_id": "e1QXBJqpkhHxXor1",
-	"filament_id": "GFB99",
+	"filament_id": "OFnRTkEq",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.93"
--- a/resources/profiles/Tiertime/filament/Tiertime
+++ b/resources/profiles/Tiertime/filament/Tiertime
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_sbs",
 	"from": "system",
 	"setting_id": "tHfCQJdD7qiIF4uT",
-	"filament_id": "GFL99",
+	"filament_id": "OFlxnxDx",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.98"
--- a/resources/profiles/Tiertime/filament/Tiertime
+++ b/resources/profiles/Tiertime/filament/Tiertime
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_sbs",
 	"from": "system",
 	"setting_id": "neqjohDEPRiOa6ut",
-	"filament_id": "GFL99_01",
+	"filament_id": "OFlxnxDx",
 	"instantiation": "true",
 	"filament_flow_ratio": [
 		"0.98"
--- a/resources/profiles/Volumic/filament/PA6
+++ b/resources/profiles/Volumic/filament/PA6
@@ -1,6 +1,6 @@
 {
 	"type": "filament",
-	"filament_id": "GFN99",
+	"filament_id": "OFHDaMut",
 	"setting_id": "wuZ0EvlbcJ8GxajY",
 	"name": "PA6 CF20 (Performance)",
 	"from": "system",
--- a/resources/profiles/Volumic/filament/PETG
+++ b/resources/profiles/Volumic/filament/PETG
@@ -1,6 +1,6 @@
 {
 	"type": "filament",
-	"filament_id": "GFG99",
+	"filament_id": "OFO3IOWM",
 	"setting_id": "May8rNEMOOs1qtae",
 	"name": "PETG ESD (Performance)",
 	"from": "system",
--- a/resources/profiles/Volumic/filament/PPS
+++ b/resources/profiles/Volumic/filament/PPS
@@ -1,6 +1,6 @@
 {
 	"type": "filament",
-	"filament_id": "GFN99",
+	"filament_id": "OFBRSZom",
 	"setting_id": "HE0yILdkhbiXbH1j",
 	"name": "PPS Carbone (Performance)",
 	"from": "system",
--- a/resources/profiles/Volumic/filament/Volumic
+++ b/resources/profiles/Volumic/filament/Volumic
@@ -1,6 +1,6 @@
 {
 	"type": "filament",
-	"filament_id": "GFB99",
+	"filament_id": "OFLhOFQk",
 	"setting_id": "uE5jxeOBISvO5o7L",
 	"name": "Volumic ASA Ultra (Performance)",
 	"from": "system",
--- a/resources/profiles/Volumic/filament/Volumic
+++ b/resources/profiles/Volumic/filament/Volumic
@@ -1,6 +1,6 @@
 {
 	"type": "filament",
-	"filament_id": "GFB99",
+	"filament_id": "OF7f0eUZ",
 	"setting_id": "LOAp2zgQWqg1lQQ4",
 	"name": "Volumic ASA Ultra",
 	"from": "system",
--- a/resources/profiles/Volumic/filament/Volumic
+++ b/resources/profiles/Volumic/filament/Volumic
@@ -1,6 +1,6 @@
 {
 	"type": "filament",
-	"filament_id": "GFG99",
+	"filament_id": "OFxfCy9m",
 	"setting_id": "NdegYSDVrQ4Rawtp",
 	"name": "Volumic PCTG Ultra (Performance)",
 	"from": "system",
--- a/resources/profiles/Volumic/filament/Volumic
+++ b/resources/profiles/Volumic/filament/Volumic
@@ -1,6 +1,6 @@
 {
 	"type": "filament",
-	"filament_id": "GFB99",
+	"filament_id": "OFPGelMX",
 	"setting_id": "nsiOJ8ExySR1RksQ",
 	"name": "Volumic PP Ultra (Performance)",
 	"from": "system",
--- a/resources/profiles/Volumic/filament/Volumic
+++ b/resources/profiles/Volumic/filament/Volumic
@@ -1,6 +1,6 @@
 {
 	"type": "filament",
-	"filament_id": "GFB99",
+	"filament_id": "OFAGqTQG",
 	"setting_id": "UA91pv54dzbBRkFe",
 	"name": "Volumic PP Ultra",
 	"from": "system",
--- a/resources/profiles/Volumic/filament/Volumic
+++ b/resources/profiles/Volumic/filament/Volumic
@@ -1,6 +1,6 @@
 {
 	"type": "filament",
-	"filament_id": "GFL99",
+	"filament_id": "OFPeGtB1",
 	"setting_id": "rxVkBvMZYgHOoFW6",
 	"name": "Volumic UNIVERSAL Ultra (Performance)",
 	"from": "system",
--- a/resources/profiles/Volumic/filament/Volumic
+++ b/resources/profiles/Volumic/filament/Volumic
@@ -1,6 +1,6 @@
 {
 	"type": "filament",
-	"filament_id": "GFL99",
+	"filament_id": "OFIzguhB",
 	"setting_id": "6iOFERN4x6xBbtuT",
 	"name": "Volumic UNIVERSAL Ultra",
 	"from": "system",
--- a/resources/profiles/Wanhao
+++ b/resources/profiles/Wanhao
@@ -58,12 +58,6 @@
 		"0.4"
 	],
 	"compatible_printers": [
-		"D12 230 PRO M2 DIRECT 0.4 nozzle",
-		"D12 230 PRO SMARTPAD DIRECT 0.4 nozzle",
-		"D12 300 PRO M2 DIRECT 0.4 nozzle",
-		"D12 300 PRO SMARTPAD DIRECT 0.4 nozzle",
-		"D12 500 PRO M2 DIRECT 0.4 nozzle",
-		"D12 500 PRO SMARTPAD DIRECT 0.4 nozzle",
 		"D12 230 PRO M2 MONO DUAL 0.4 nozzle",
 		"D12 230 PRO M2 MONO DUAL 0.4 nozzle PoopTool",
 		"D12 300 PRO M2 MONO DUAL PoopTool 0.4 nozzle",
--- a/resources/profiles/iQ/filament/Grauts
+++ b/resources/profiles/iQ/filament/Grauts
@@ -4,7 +4,7 @@
 	"inherits": "fdm_filament_common",
 	"from": "system",
 	"setting_id": "5M829nxsQdq2Sde5",
-	"filament_id": "IQM1",
+	"filament_id": "OFL4BLAC",
 	"instantiation": "true",
 	"compatible_prints": [
 		"0.20mm Standard @iQ TiQ2 P1 - HPP4GF25 Grauts (0.4 Nozzle)"
--- a/scripts/filament_id_snapshot.json
+++ b/scripts/filament_id_snapshot.json
@@ -314,6 +314,7 @@
  "CONSTRUCT3D/C1 Generic High Flow PETG",
  "CONSTRUCT3D/C1 Generic PETG",
  "CONSTRUCT3D/C1 Generic PLA",
+  "Chuanying/Chuanying Generic HIPS",
  "Chuanying/Chuanying Generic HS PLA",
  "Chuanying/Chuanying Generic PETG",
  "Chuanying/Chuanying Generic PETG-CF10",
@@ -321,7 +322,10 @@
  "Chuanying/Chuanying Generic PLA-CF10",
  "Chuanying/Chuanying Generic PLA-Silk",
  "Chuanying/Chuanying Generic PVA",
+  "Co Print/CoPrint Generic ABS",
+  "Co Print/CoPrint Generic PETG",
  "Co Print/CoPrint Generic PLA",
+  "Co Print/CoPrint Generic TPU",
  "CoLiDo/CoLiDo Generic PETG @CoLiDo DIY 4.0",
  "CoLiDo/CoLiDo Generic PETG @CoLiDo X16",
  "CoLiDo/CoLiDo Generic PLA @CoLiDo DIY 4.0",
@@ -704,6 +708,10 @@
  "FLSun/FLSun Generic PETG",
  "FLSun/FLSun Generic PLA",
  "FLSun/FLSun Generic PLA-CF",
+  "FLSun/FLSun S1 PLA High Speed",
+  "FLSun/FLSun S1 PLA Silk",
+  "FLSun/FLSun T1 PLA High Speed",
+  "FLSun/FLSun T1 PLA Silk",
  "Flashforge/FlashForge PC @FF G4 0.6 HF nozzle",
  "Flashforge/FlashForge PC @FF G4 0.6 nozzle",
  "Flashforge/FlashForge PC @FF G4 0.8 HF nozzle",
@@ -2645,7 +2653,6 @@
   "Blocks/Blocks Generic PVA"
  ],
  "BSFI010": [
-   "Blocks/Blocks Generic ASA-CF",
   "Blocks/Blocks Generic PLA-CF"
  ],
  "BTUB00": [
@@ -2786,8 +2793,7 @@
   "Eryone/Eryone PLA-CF"
  ],
  "EFL43": [
-   "Eryone/Eryone PETG-CF",
-   "Eryone/Eryone PP"
+   "Eryone/Eryone PETG-CF"
  ],
  "EFL71": [
   "Eryone/Eryone PA"
@@ -3095,7 +3101,6 @@
  ],
  "GFA00_01": [
   "Afinia/Afinia PLA",
-   "Afinia/Afinia Value PLA",
   "Tiertime/Tiertime PLA"
  ],
  "GFA01": [
@@ -3114,7 +3119,6 @@
  "GFA05": [
   "BBL/Bambu PLA Silk",
   "OrcaArena/Arena PLA Silk",
-   "OrcaArena/OrcaArena Generic PLA Silk",
   "Qidi/Qidi Generic PLA Silk",
   "WonderMaker/WonderMaker PLA Silk"
  ],
@@ -3170,8 +3174,6 @@
  "GFA99": [
   "Anycubic/Anycubic ASA",
   "CoLiDo/CoLiDo Generic PLA",
-   "CoLiDo/CoLiDo PLA",
-   "CoLiDo/CoLiDo PLA Silk",
   "CoLiDo/CoLiDo PLA+"
  ],
  "GFASA": [
@@ -3188,8 +3190,6 @@
  ],
  "GFB00_01": [
   "Afinia/Afinia ABS",
-   "Afinia/Afinia ABS+",
-   "Afinia/Afinia Value ABS",
   "Tiertime/Tiertime ABS"
  ],
  "GFB01": [
@@ -3229,7 +3229,6 @@
   "OrcaArena/OrcaArena Generic ASA",
   "Prusa/Prusa Generic ASA",
   "Prusa/Prusament ASA",
-   "Ratrig/RatRig BigNozzle ASA",
   "Ratrig/RatRig Generic ASA",
   "SecKit/SecKit Generic ASA",
   "Tiertime/Tiertime Generic ASA",
@@ -3266,8 +3265,6 @@
   "BBL/Generic ABS",
   "Chuanying/Chuanying ABS",
   "Chuanying/Chuanying Generic ABS",
-   "Chuanying/Chuanying Generic HIPS",
-   "Chuanying/Chuanying Generic PVA",
   "CoLiDo/CoLiDo ABS",
   "CoLiDo/CoLiDo Generic ABS",
   "Comgrow/Comgrow Generic ABS",
@@ -3284,19 +3281,11 @@
   "OrcaArena/OrcaArena Generic ABS",
   "Prusa/Prusa Generic ABS",
   "Qidi/Qidi Generic ABS",
-   "Ratrig/RatRig BigNozzle ABS",
   "Ratrig/RatRig Generic ABS",
-   "Ratrig/RatRig PunkFil ABS",
-   "Ratrig/RatRig PunkFil PETG",
-   "Ratrig/RatRig PunkFil PETG CF",
   "SecKit/SecKit Generic ABS",
   "Tiertime/Tiertime Generic ABS",
   "Volumic/Volumic ABS Ultra",
   "Volumic/Volumic ABS Ultra (Performance)",
-   "Volumic/Volumic ASA Ultra",
-   "Volumic/Volumic ASA Ultra (Performance)",
-   "Volumic/Volumic PP Ultra",
-   "Volumic/Volumic PP Ultra (Performance)",
   "Vzbot/Vzbot Generic ABS"
  ],
  "GFB99_01": [
@@ -3350,9 +3339,7 @@
   "Prusa/Prusa Generic PC",
   "Prusa/Prusament PC Blend",
   "Qidi/Qidi Generic PC",
-   "Ratrig/RatRig BigNozzle PCTG",
   "Ratrig/RatRig Generic PC",
-   "Ratrig/RatRig Generic PCTG",
   "SecKit/SecKit Generic PC",
   "Tiertime/Tiertime Generic PC",
   "Volumic/Volumic PC",
@@ -3438,11 +3425,8 @@
   "Anycubic/Anycubic Generic PETG",
   "Artillery/Artillery Generic PETG",
   "BBL/Generic PETG",
-   "CONSTRUCT3D/C1 Generic High Flow PETG",
   "CONSTRUCT3D/C1 Generic PETG",
   "Chuanying/Chuanying Generic PETG",
-   "Chuanying/Chuanying Generic PETG-CF10",
-   "Chuanying/Chuanying Generic TPU",
   "Chuanying/Chuanying PETG",
   "CoLiDo/CoLiDo Generic PETG",
   "CoLiDo/CoLiDo PETG",
@@ -3462,12 +3446,9 @@
   "MagicMaker/MM Generic PEEK",
   "OrcaArena/OrcaArena Generic PETG",
   "Qidi/Qidi Generic PETG",
-   "Ratrig/RatRig BigNozzle PETG",
   "Ratrig/RatRig Generic PETG",
   "SecKit/SecKit Generic PETG",
   "Tiertime/Tiertime Generic PETG",
-   "Volumic/PETG ESD (Performance)",
-   "Volumic/Volumic PCTG Ultra (Performance)",
   "Volumic/Volumic PETG Ultra",
   "Volumic/Volumic PETG Ultra (Performance)",
   "Vzbot/Vzbot Generic PETG",
@@ -3741,33 +3722,18 @@
   "Artillery/Artillery Generic PLA",
   "BBL/Generic PLA",
   "CONSTRUCT3D/C1 Generic PLA",
-   "Chuanying/Chuanying ASA",
-   "Chuanying/Chuanying Generic ASA",
-   "Chuanying/Chuanying Generic HS PLA",
   "Chuanying/Chuanying Generic PLA",
-   "Chuanying/Chuanying Generic PLA-CF10",
-   "Chuanying/Chuanying Generic PLA-Silk",
-   "Chuanying/Chuanying HS PLA",
   "Chuanying/Chuanying PLA",
-   "Chuanying/Chuanying PLA-SILK",
-   "Co Print/CoPrint Generic ABS",
-   "Co Print/CoPrint Generic PETG",
   "Co Print/CoPrint Generic PLA",
-   "Co Print/CoPrint Generic TPU",
   "Comgrow/Comgrow Generic PLA",
   "Comgrow/Comgrow T300 PLA",
   "Creality/Creality Generic PLA",
   "Custom/Generic PLA",
-   "DeltaMaker/DeltaMaker Brand PLA",
   "DeltaMaker/DeltaMaker Generic PLA",
   "Dremel/Dremel Generic PLA",
   "FLSun/FLSun Generic PLA",
   "FLSun/FLSun S1 PLA Generic",
-   "FLSun/FLSun S1 PLA High Speed",
-   "FLSun/FLSun S1 PLA Silk",
   "FLSun/FLSun T1 PLA Generic",
-   "FLSun/FLSun T1 PLA High Speed",
-   "FLSun/FLSun T1 PLA Silk",
   "Flashforge/Generic PLA",
   "Flashforge/Generic PLA High Speed",
   "FlyingBear/FlyingBear Generic PLA",
@@ -3775,30 +3741,20 @@
   "Lulzbot/Lulzbot 2.85mm PLA",
   "OrcaArena/OrcaArena Generic PLA",
   "Peopoly/Peopoly Generic PLA",
-   "Peopoly/Peopoly Lancer ABS-GF",
-   "Peopoly/Peopoly Lancer PET-CF",
-   "Peopoly/Peopoly Lancer PETG-C",
-   "Peopoly/Peopoly Lancer PLA-C",
   "Phrozen/Phrozen PLA",
   "Prusa/Prusa Generic PLA",
   "Qidi/Qidi Generic PLA",
-   "Ratrig/RatRig BigNozzle PLA",
-   "Ratrig/RatRig BigNozzle TPU",
   "Ratrig/RatRig Generic PLA",
   "SecKit/SecKit Generic PLA",
   "Sovol/Sovol SV07 PLA",
   "Tiertime/Tiertime Generic PLA",
-   "Tiertime/Tiertime Generic SBS",
   "Volumic/Volumic PLA Ultra",
   "Volumic/Volumic PLA Ultra (Performance)",
-   "Volumic/Volumic UNIVERSAL Ultra",
-   "Volumic/Volumic UNIVERSAL Ultra (Performance)",
   "Vzbot/Vzbot Generic PLA",
   "re3D/re3D PLA"
  ],
  "GFL99_01": [
-   "Tiertime/Tiertime Generic PLA",
-   "Tiertime/Tiertime Generic SBS"
+   "Tiertime/Tiertime Generic PLA"
  ],
  "GFL99_2": [
   "Prusa/Prusa Generic PLA"
@@ -3911,8 +3867,6 @@
   "Ratrig/RatRig Generic PA",
   "SecKit/SecKit Generic PA",
   "Tiertime/Tiertime Generic PA",
-   "Volumic/PA6 CF20 (Performance)",
-   "Volumic/PPS Carbone (Performance)",
   "Volumic/Volumic NYLON Ultra",
   "Volumic/Volumic NYLON Ultra (Performance)",
   "Vzbot/Vzbot Generic PA"
@@ -4526,8 +4480,7 @@
   "RH3D/Generic TPU"
  ],
  "IQM1": [
-   "iQ/Fiberthree PACF Pro P1",
-   "iQ/Grauts HPP4GF25 P1"
+   "iQ/Fiberthree PACF Pro P1"
  ],
  "IQM1011": [
   "iQ/VXL90 TiQ2 P2"
@@ -4637,6 +4590,9 @@
  "OF22AxCm": [
   "Sovol/Polymaker PETG"
  ],
+  "OF2Psxdc": [
+   "Co Print/CoPrint Generic TPU"
+  ],
  "OF2UFmOo": [
   "Qidi/Bambu PLA"
  ],
@@ -4652,6 +4608,9 @@
  "OF3XeEuV": [
   "Qidi/QIDI PET-GF"
  ],
+  "OF3YOOOs": [
+   "Chuanying/Chuanying Generic PETG-CF10"
+  ],
  "OF3arl18": [
   "Elegoo/Elegoo Rapid PETG"
  ],
@@ -4727,9 +4686,19 @@
  "OF79FFkO": [
   "OrcaFilamentLibrary/Elegoo PC-FR"
  ],
+  "OF7M9vy4": [
+   "Ratrig/RatRig BigNozzle PLA"
+  ],
  "OF7cv1Ub": [
   "Qidi/QIDI PLA-CF"
  ],
+  "OF7f0eUZ": [
+   "Volumic/Volumic ASA Ultra"
+  ],
+  "OF7tgL9c": [
+   "Chuanying/Chuanying ASA",
+   "Chuanying/Chuanying Generic ASA"
+  ],
  "OF8HQmJD": [
   "OrcaFilamentLibrary/Elegoo PLA Sparkle"
  ],
@@ -4745,12 +4714,18 @@
  "OF9sr3Vn": [
   "Flashforge/Flashforge PLA Sparkle"
  ],
+  "OF9tjFbj": [
+   "Peopoly/Peopoly Lancer PLA-C"
+  ],
  "OF9vnvM8": [
   "Artillery/Artillery PETG-CF"
  ],
  "OFAEqlWa": [
   "Flashforge/Flashforge Generic PLA-SILK"
  ],
+  "OFAGqTQG": [
+   "Volumic/Volumic PP Ultra"
+  ],
  "OFAGrVjP": [
   "Flashforge/Flashforge PLA Silk"
  ],
@@ -4763,6 +4738,9 @@
  "OFAUDGEQ": [
   "Qidi/QIDI PLA Rapido Matte"
  ],
+  "OFAUX5fB": [
+   "CONSTRUCT3D/C1 Generic High Flow PETG"
+  ],
  "OFAbsMuV": [
   "Snapmaker/Snapmaker Dual TPE"
  ],
@@ -4784,6 +4762,9 @@
  "OFBGxHgT": [
   "FlyingBear/FlyingBear PLA"
  ],
+  "OFBRSZom": [
+   "Volumic/PPS Carbone (Performance)"
+  ],
  "OFBvxnjM": [
   "Elegoo/Elegoo PETG-GF"
  ],
@@ -4820,6 +4801,9 @@
  "OFDkABjZ": [
   "Flashforge/Generic TPU-90A"
  ],
+  "OFDramZ2": [
+   "Co Print/CoPrint Generic PETG"
+  ],
  "OFE22Uba": [
   "Flashforge/Flashforge TPU-90A"
  ],
@@ -4832,6 +4816,9 @@
  "OFFIL5pD": [
   "Qidi/QIDI PA12-CF"
  ],
+  "OFFenwbU": [
+   "FLSun/FLSun S1 PLA Silk"
+  ],
  "OFFmJ8aR": [
   "FlyingBear/Other PLA Hyper"
  ],
@@ -4853,6 +4840,9 @@
  "OFHBTqyD": [
   "Flashforge/Flashforge PLA Basic"
  ],
+  "OFHDaMut": [
+   "Volumic/PA6 CF20 (Performance)"
+  ],
  "OFHL32M0": [
   "Anycubic/Anycubic TPU"
  ],
@@ -4868,6 +4858,9 @@
  "OFIl3ar9": [
   "Sovol/Sovol SV08 PETG"
  ],
+  "OFIzguhB": [
+   "Volumic/Volumic UNIVERSAL Ultra"
+  ],
  "OFJIImD5": [
   "OrcaFilamentLibrary/Elegoo PET-CF"
  ],
@@ -4904,9 +4897,15 @@
  "OFKzh9lx": [
   "InfiMech/InfiMech PLA"
  ],
+  "OFL4BLAC": [
+   "iQ/Grauts HPP4GF25 P1"
+  ],
  "OFL4KniM": [
   "Elegoo/Elegoo Rapid TPU 95A"
  ],
+  "OFL7U2MV": [
+   "Ratrig/RatRig PunkFil ABS"
+  ],
  "OFL7vEML": [
   "Flashforge/FlashForge PC"
  ],
@@ -4916,6 +4915,9 @@
  "OFLeFaUO": [
   "Flashforge/Flashforge Generic PVA"
  ],
+  "OFLhOFQk": [
+   "Volumic/Volumic ASA Ultra (Performance)"
+  ],
  "OFLiTjQK": [
   "FlyingBear/Other PA-CF"
  ],
@@ -4952,9 +4954,15 @@
  "OFNbajj9": [
   "Creality/Creality Generic ASA-CF"
  ],
+  "OFNvrbnf": [
+   "Co Print/CoPrint Generic ABS"
+  ],
  "OFNz8rrn": [
   "FlyingBear/FlyingBear PLA Hyper"
  ],
+  "OFO3IOWM": [
+   "Volumic/PETG ESD (Performance)"
+  ],
  "OFO5R9KJ": [
   "Sovol/Sovol Zero TPU"
  ],
@@ -4976,18 +4984,27 @@
  "OFP4poIv": [
   "Sovol/Sovol Zero PLA Silk HS Nozzle"
  ],
+  "OFPGelMX": [
+   "Volumic/Volumic PP Ultra (Performance)"
+  ],
  "OFPJJxkF": [
   "Flashforge/Flashforge PET-CF"
  ],
  "OFPJrlC3": [
   "Flashforge/Flashforge PLA-CF"
  ],
+  "OFPeGtB1": [
+   "Volumic/Volumic UNIVERSAL Ultra (Performance)"
+  ],
  "OFPokkKe": [
   "Qidi/QIDI PETG-CF"
  ],
  "OFPwi9X0": [
   "Qidi/HATCHBOX ABS"
  ],
+  "OFQ5xAKf": [
+   "Chuanying/Chuanying Generic PVA"
+  ],
  "OFQ9dI8j": [
   "Prusa/Prusa Generic PC HF"
  ],
@@ -5003,6 +5020,9 @@
  "OFQkWxJy": [
   "OrcaFilamentLibrary/Elegoo PLA Matte"
  ],
+  "OFR8dTVW": [
+   "FLSun/FLSun S1 PLA High Speed"
+  ],
  "OFRNU58t": [
   "Flashforge/Flashforge TPU 95A"
  ],
@@ -5015,6 +5035,9 @@
  "OFRgDMDJ": [
   "Flashforge/Flashforge PETG Transparent"
  ],
+  "OFS1ekCg": [
+   "Ratrig/RatRig BigNozzle PCTG"
+  ],
  "OFS3HrR1": [
   "InfiMech/Other PLA"
  ],
@@ -5027,6 +5050,9 @@
  "OFSdF3B1": [
   "Flashforge/FusRock PAHT-CF"
  ],
+  "OFSkBwxf": [
+   "Ratrig/RatRig BigNozzle ASA"
+  ],
  "OFSoZBK2": [
   "Sovol/Sovol SV06 Plus ACE PLA"
  ],
@@ -5063,6 +5089,12 @@
  "OFUkpobY": [
   "Qidi/QIDI PAHT-CF"
  ],
+  "OFUqBrgf": [
+   "Chuanying/Chuanying Generic TPU"
+  ],
+  "OFV1szQh": [
+   "Peopoly/Peopoly Lancer PETG-C"
+  ],
  "OFV4hD1o": [
   "Qidi/QIDI PLA Rapido Metal"
  ],
@@ -5099,6 +5131,9 @@
  "OFXNO5Of": [
   "Qidi/QIDI PLA Rapido 0.2 nozzle"
  ],
+  "OFXQX0tr": [
+   "Ratrig/RatRig PunkFil PETG CF"
+  ],
  "OFXcfTEb": [
   "Qidi/Tinmorry PETG-ECO"
  ],
@@ -5117,6 +5152,9 @@
  "OFY1U4uM": [
   "Sovol/Sovol SV08 TPU"
  ],
+  "OFYG2Gfy": [
+   "Afinia/Afinia ABS+"
+  ],
  "OFYH00jV": [
   "Qidi/QIDI ABS-GF"
  ],
@@ -5129,6 +5167,9 @@
  "OFYZs7dN": [
   "Flashforge/Flashforge Generic HS PLA"
  ],
+  "OFYehFGr": [
+   "Ratrig/RatRig BigNozzle TPU"
+  ],
  "OFYfZgxU": [
   "FlyingBear/FlyingBear TPU"
  ],
@@ -5219,6 +5260,9 @@
  "OFeybQvK": [
   "Qidi/QIDI ABS Rapido 0.2 nozzle"
  ],
+  "OFf0JIqs": [
+   "Eryone/Eryone PP"
+  ],
  "OFf2b9wu": [
   "Anycubic/Anycubic ABS"
  ],
@@ -5231,9 +5275,16 @@
  "OFfdxQok": [
   "Qidi/Generic PLA+"
  ],
+  "OFfiN1Lw": [
+   "Chuanying/Chuanying Generic HS PLA",
+   "Chuanying/Chuanying HS PLA"
+  ],
  "OFfkPhrJ": [
   "Creality/Creality HF Generic Speed PLA"
  ],
+  "OFfoA8kJ": [
+   "CoLiDo/CoLiDo PLA"
+  ],
  "OFftQOek": [
   "Flashforge/Flashforge PLA  Matte"
  ],
@@ -5303,6 +5354,9 @@
  "OFjepy6j": [
   "Flashforge/FusRock Generic S-PAHT"
  ],
+  "OFjj9Yiz": [
+   "Ratrig/RatRig BigNozzle PETG"
+  ],
  "OFjohFkg": [
   "Qidi/QIDI PETG Translucent"
  ],
@@ -5333,12 +5387,22 @@
  "OFkoT6jl": [
   "Prusa/Prusament PLA"
  ],
+  "OFlN56xW": [
+   "Chuanying/Chuanying Generic PLA-Silk",
+   "Chuanying/Chuanying PLA-SILK"
+  ],
  "OFlNKZLP": [
   "Flashforge/Flashforge PLA  Metal"
  ],
  "OFlbn4FY": [
   "Snapmaker/Snapmaker PLA Matte"
  ],
+  "OFlxnxDx": [
+   "Tiertime/Tiertime Generic SBS"
+  ],
+  "OFlzQ0IS": [
+   "Peopoly/Peopoly Lancer PET-CF"
+  ],
  "OFm1VZed": [
   "Flashforge/Flashforge Generic PLA-CF"
  ],
@@ -5369,6 +5433,9 @@
  "OFnMW5jr": [
   "FlyingBear/FlyingBear ABS"
  ],
+  "OFnRTkEq": [
+   "Ratrig/RatRig PunkFil PETG"
+  ],
  "OFnY9ovF": [
   "Artillery/Artillery PA-CF"
  ],
@@ -5417,9 +5484,15 @@
  "OFqRWRU6": [
   "Flashforge/Flashforge ABS-GF"
  ],
+  "OFqSTJ3I": [
+   "OrcaArena/OrcaArena Generic PLA Silk"
+  ],
  "OFqh1Ngp": [
   "OrcaFilamentLibrary/Elegoo PLA-CF"
  ],
+  "OFqkcvDI": [
+   "Peopoly/Peopoly Lancer ABS-GF"
+  ],
  "OFqyIUDi": [
   "Qidi/Qidi PLA-CF"
  ],
@@ -5453,6 +5526,9 @@
  "OFsmPFwh": [
   "Sovol/Sovol SV06 Plus ACE TPU"
  ],
+  "OFt1YdX8": [
+   "FLSun/FLSun T1 PLA Silk"
+  ],
  "OFt5bvKK": [
   "Artillery/Artillery PETG Basic"
  ],
@@ -5471,6 +5547,9 @@
  "OFtXBjvb": [
   "Artillery/Artillery PLA Tough"
  ],
+  "OFtcTs1o": [
+   "Ratrig/RatRig BigNozzle ABS"
+  ],
  "OFtemzzw": [
   "Sovol/Sovol SV06 ACE ABS"
  ],
@@ -5495,6 +5574,9 @@
  "OFuXkYly": [
   "Elegoo/Elegoo PLA Glow"
  ],
+  "OFuYvNS3": [
+   "Afinia/Afinia Value ABS"
+  ],
  "OFuidAEg": [
   "Qidi/Bambu ABS"
  ],
@@ -5537,6 +5619,9 @@
  "OFvsS7Fb": [
   "Flashforge/Generic TPU-64D"
  ],
+  "OFvw0owy": [
+   "Afinia/Afinia Value PLA"
+  ],
  "OFvxvkAd": [
   "Artillery/Artillery PLA-CF"
  ],
@@ -5564,12 +5649,27 @@
  "OFxLeRyT": [
   "Prusa/Prusa Generic PVA HF"
  ],
+  "OFxVzzn4": [
+   "Chuanying/Chuanying Generic PLA-CF10"
+  ],
+  "OFxfCy9m": [
+   "Volumic/Volumic PCTG Ultra (Performance)"
+  ],
  "OFxjFYxE": [
   "Elegoo/Elegoo PETG HF"
  ],
+  "OFxlch4V": [
+   "CoLiDo/CoLiDo PLA Silk"
+  ],
+  "OFxodd2u": [
+   "DeltaMaker/DeltaMaker Brand PLA"
+  ],
  "OFxxa5yn": [
   "Snapmaker/Snapmaker Dual ABS Benchy"
  ],
+  "OFy7oQ1g": [
+   "Blocks/Blocks Generic ASA-CF"
+  ],
  "OFyD1Zo8": [
   "InfiMech/Other PC"
  ],
@@ -5579,12 +5679,24 @@
  "OFypQeKR": [
   "Elegoo/Generic PC-CF"
  ],
+  "OFyt23xJ": [
+   "FLSun/FLSun T1 PLA High Speed"
+  ],
  "OFyxAbO4": [
   "Flashforge/Flashforge TPU-95A"
  ],
  "OFzFbFcl": [
   "Elegoo/Elegoo PC-FR"
  ],
+  "OFzQQeCi": [
+   "Chuanying/Chuanying Generic HIPS"
+  ],
+  "OFzb2BLs": [
+   "Ratrig/RatRig Generic PCTG"
+  ],
+  "OFziUL2X": [
+   "Ginger Additive/Ginger Generic PLA"
+  ],
  "OFzrWlH5": [
   "OrcaFilamentLibrary/Elegoo PETG HF"
  ],
@@ -5968,8 +6080,7 @@
   "Cubicon/Cubicon PA-CF"
  ],
  "P510eff9": [
-   "Ginger Additive/Ginger Generic PETG",
-   "Ginger Additive/Ginger Generic PLA"
+   "Ginger Additive/Ginger Generic PETG"
  ],
  "Pfcf9c4c": [
   "Artillery/Artillery PLA"
@@ -6965,7 +7076,6 @@
  "CONSTRUCT3D/C1 Generic PETG",
  "CONSTRUCT3D/C1 Generic PLA",
  "Chuanying/Chuanying ABS @Chuanying X1 0.25 Nozzle",
-  "Chuanying/Chuanying ASA @Chuanying X1 0.25 Nozzle",
  "Chuanying/Chuanying Generic ABS",
  "Chuanying/Chuanying Generic ASA",
  "Chuanying/Chuanying Generic HIPS",
@@ -6977,9 +7087,7 @@
  "Chuanying/Chuanying Generic PLA-Silk",
  "Chuanying/Chuanying Generic PVA",
  "Chuanying/Chuanying Generic TPU",
-  "Chuanying/Chuanying HS PLA @Chuanying X1 0.25 Nozzle",
  "Chuanying/Chuanying PETG @Chuanying X1 0.25 Nozzle",
-  "Chuanying/Chuanying PLA-SILK @Chuanying X1 0.25 Nozzle",
  "Co Print/CoPrint Generic ABS",
  "Co Print/CoPrint Generic PETG",
  "Co Print/CoPrint Generic PLA",
@@ -8122,6 +8230,8 @@
  "FlyingBear/Other PLA @S1",
  "FlyingBear/Other PLA Hyper @S1",
  "FlyingBear/Other TPU @S1",
+  "Ginger Additive/Ginger Generic PETG",
+  "Ginger Additive/Ginger Generic PLA",
  "InfiMech/InfiMech ABS @EX",
  "InfiMech/InfiMech ABS @EX+APS",
  "InfiMech/InfiMech ABS @HSN",