mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-08-04 08:42:10 +00:00
0d31325df0
The Filament Track Switch (H2-series accessory, product code O2L-FTS) feeds every AMS to both extruders through a two-track switch. Port full support across the device layer, project config, and GUI. Device / config: - Model the switch-aware AMS binding (the set of extruders an AMS can feed and which input track A/B feeds it), switch readiness, the O2L-FTS firmware module, and the fun2 capability bit for checking a slice against installed hardware. - Register has_filament_switcher and enable_filament_dynamic_map as project config that persists with the project and restores from a saved 3mf, and force both back to false on every project/printer/CLI load path. Live device sync is the only thing that sets them true. GUI: - Sidebar sync activates the switch from live device state, attributes each AMS to the extruder its input track feeds, shows a floating status icon (ready / not-calibrated), and surfaces a one-time tip / not-calibrated warning. - Send dialog gains a non-blocking slice-vs-hardware mismatch warning and a blocking error when a slice needs dynamic nozzle mapping but the switch is missing or not set up. - AMS load/unload guards, AMS-view routing glyph + un-calibrated banner + hidden external-spool road, and mapping-popup external-spool lockout. - Filament pickers collapse the per-extruder split into a single deduplicated "AMS filaments" group with a smart-assign toggle when the switch is ready. - Firmware-upgrade panel lists the O2L-FTS accessory and its version. - Device-provided filament-change steps (ams.cfs) drive the change-step display when firmware sends them, including the three switch steps. - "Load current filament" asks which extruder to feed via a FeedDirectionDialog when the switch is calibrated. Inert without the accessory: every path is gated on the switch being installed (MQTT aux bit 29, default off) or ready, both project flags default false, and the per-extruder AMS attribution is byte-identical, so AMS state, the send/load UI, and sliced g-code are unchanged for every printer that does not report a Filament Track Switch.
39 lines
3.6 KiB
XML
39 lines
3.6 KiB
XML
<svg width="17" height="9" viewBox="0 0 17 9" fill="none" xmlns="http://www.w3.org/2000/svg">
|
|
<g filter="url(#filter0_iiii_6472_20428)">
|
|
<rect x="0.0527344" y="0.0527344" width="16" height="8.42105" rx="0.842105" fill="#808080"/>
|
|
</g>
|
|
<rect x="0.0527344" y="0.0527344" width="16" height="8.42105" rx="0.842105" stroke="#C2C2C2" stroke-width="0.105263"/>
|
|
<path d="M10.7006 2.79037H10.5244L10.426 2.792C9.41175 2.82502 8.47921 3.36695 7.94928 4.23755C7.46947 5.02578 6.61347 5.50693 5.69069 5.50693H5.51452V4.94947C5.51452 4.80429 5.35736 4.71355 5.23163 4.78614L3.94526 5.52882C3.81952 5.60141 3.81952 5.78289 3.94526 5.85548L5.23163 6.59816C5.35736 6.67075 5.51452 6.58001 5.51452 6.43483V5.87736H5.69069C6.74276 5.87736 7.71879 5.32886 8.26581 4.43018C8.73063 3.66656 9.54849 3.1912 10.4381 3.16225L10.5244 3.1608H10.7006V3.71826C10.7006 3.86344 10.8577 3.95418 10.9835 3.88159L12.2698 3.13891C12.3956 3.06632 12.3956 2.88485 12.2698 2.81225L10.9835 2.06958C10.8577 1.99699 10.7006 2.08773 10.7006 2.23291V2.79037Z" fill="#EEEEEE"/>
|
|
<path d="M5.51452 2.79037H5.69069L5.78908 2.792C6.80334 2.82502 7.73588 3.36695 8.26581 4.23755C8.74562 5.02578 9.60161 5.50693 10.5244 5.50693H10.7006V4.94947C10.7006 4.80429 10.8577 4.71355 10.9835 4.78614L12.2698 5.52882C12.3956 5.60141 12.3956 5.78289 12.2698 5.85548L10.9835 6.59816C10.8577 6.67075 10.7006 6.58001 10.7006 6.43483V5.87736H10.5244C9.47233 5.87736 8.4963 5.32886 7.94928 4.43018C7.48446 3.66656 6.6666 3.1912 5.77697 3.16225L5.69069 3.1608H5.51452V3.71826C5.51452 3.86344 5.35735 3.95418 5.23162 3.88159L3.94525 3.13891C3.81952 3.06632 3.81952 2.88485 3.94525 2.81225L5.23162 2.06958C5.35735 1.99699 5.51452 2.08773 5.51452 2.23291V2.79037Z" fill="#EEEEEE"/>
|
|
<defs>
|
|
<filter id="filter0_iiii_6472_20428" x="-1" y="-1" width="18.1055" height="10.5264" filterUnits="userSpaceOnUse" color-interpolation-filters="sRGB">
|
|
<feFlood flood-opacity="0" result="BackgroundImageFix"/>
|
|
<feBlend mode="normal" in="SourceGraphic" in2="BackgroundImageFix" result="shape"/>
|
|
<feColorMatrix in="SourceAlpha" type="matrix" values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 127 0" result="hardAlpha"/>
|
|
<feOffset dy="-1"/>
|
|
<feGaussianBlur stdDeviation="0.5"/>
|
|
<feComposite in2="hardAlpha" operator="arithmetic" k2="-1" k3="1"/>
|
|
<feColorMatrix type="matrix" values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.25 0"/>
|
|
<feBlend mode="normal" in2="shape" result="effect1_innerShadow_6472_20428"/>
|
|
<feColorMatrix in="SourceAlpha" type="matrix" values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 127 0" result="hardAlpha"/>
|
|
<feOffset dx="-1"/>
|
|
<feGaussianBlur stdDeviation="0.5"/>
|
|
<feComposite in2="hardAlpha" operator="arithmetic" k2="-1" k3="1"/>
|
|
<feColorMatrix type="matrix" values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0.25 0"/>
|
|
<feBlend mode="normal" in2="effect1_innerShadow_6472_20428" result="effect2_innerShadow_6472_20428"/>
|
|
<feColorMatrix in="SourceAlpha" type="matrix" values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 127 0" result="hardAlpha"/>
|
|
<feOffset dy="1"/>
|
|
<feGaussianBlur stdDeviation="0.5"/>
|
|
<feComposite in2="hardAlpha" operator="arithmetic" k2="-1" k3="1"/>
|
|
<feColorMatrix type="matrix" values="0 0 0 0 1 0 0 0 0 1 0 0 0 0 1 0 0 0 0.25 0"/>
|
|
<feBlend mode="normal" in2="effect2_innerShadow_6472_20428" result="effect3_innerShadow_6472_20428"/>
|
|
<feColorMatrix in="SourceAlpha" type="matrix" values="0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 127 0" result="hardAlpha"/>
|
|
<feOffset dx="1"/>
|
|
<feGaussianBlur stdDeviation="0.5"/>
|
|
<feComposite in2="hardAlpha" operator="arithmetic" k2="-1" k3="1"/>
|
|
<feColorMatrix type="matrix" values="0 0 0 0 1 0 0 0 0 1 0 0 0 0 1 0 0 0 0.25 0"/>
|
|
<feBlend mode="normal" in2="effect3_innerShadow_6472_20428" result="effect4_innerShadow_6472_20428"/>
|
|
</filter>
|
|
</defs>
|
|
</svg>
|