mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-08-29 21:07:11 +00:00
3af72ab54d
Import 191 brand-specific filament presets for the K2 family of
printers (K2, K2 Plus, K2 Pro), lifted from
CrealityOfficial/CrealityPrint v7.1.1 under AGPL-3.0 (compatible
with OrcaSlicer AGPL-3.0).
Brand coverage:
CR-series: CR-PLA, CR-PLA Matte, CR-PLA Fluo, CR-Silk,
CR-TPU, CR-ABS, CR-Nylon
Hyper-series: Hyper PLA, Hyper PLA-CF, Hyper ABS, Hyper PA-CF,
Hyper PA6-CF, Hyper PAHT-CF, Hyper PA612-CF,
Hyper PC, Hyper Marble, Hyper Stardust,
Hyper L-W PLA, Hyper PPA-CF
Third-party: eSUN PLA+ / PLA-HS / PLA-Matte / PLA-Silk /
PLA-CF / PLA-LW / PLA-Lite, PolySonic PLA /
PLA Pro, Panchroma PLA Matte / Satin, Soleyin
Ultra PLA, HP Ultra PLA, HP-ASA, HP-TPU
Ender PLA variants and CrealityPrint per-K2 Generic versions of
PLA, ABS, ASA, PA, PA-CF, PAHT-CF, PET, etc.
This closes the matching gap exposed by the CFS filament-sync
work. When the K2 reports spool brand Hyper PLA or CR-PLA, the
existing Creality vendor only had a generic Creality Generic PLA
@K2-all preset to fall back to, so per-brand temps / PA / cooling
tuning was lost on every sync.
Schema and naming are drop-in compatible -- CrealityPrint
references the K2/K2 Plus/K2 Pro machine names already present in
OrcaSlicer Creality vendor (Creality K2 0.4 nozzle, etc), so no
machine-side changes or compatible_printers rewrites are required.
K2 SE filaments and the PETG/PP/PPS/HIPS family are deferred. K2
SE machine profile is not yet in OrcaSlicer Creality vendor, and
the PETG/PP/PPS/HIPS family relies on fdm_filament_* base
templates that do not exist in Orca Creality vendor -- importing
those bases from CrealityPrint did not make them register as valid
parents at preset-load time. Coverage for the missing families
will land in a follow-up once the loader requirements for new
bases are understood.
Vendor version bumped to 02.03.02.75 to trigger the per-user
profile refresh on next launch. Source attribution captured in
resources/profiles/Creality/NOTICE.md.
106 lines
3.9 KiB
JSON
106 lines
3.9 KiB
JSON
{
|
|
"type": "filament",
|
|
"filament_id": "00016",
|
|
"setting_id": "GFSA04",
|
|
"name": "Generic PAHT-CF @Creality K2 0.4 nozzle",
|
|
"from": "system",
|
|
"instantiation": "true",
|
|
"inherits": "fdm_filament_pa",
|
|
"activate_air_filtration": "0",
|
|
"activate_chamber_temp_control": "1",
|
|
"additional_cooling_fan_speed": "0",
|
|
"chamber_temperature": "50",
|
|
"close_fan_the_first_x_layers": "3",
|
|
"compatible_printers": [
|
|
"Creality K2 0.4 nozzle"
|
|
],
|
|
"complete_print_exhaust_fan_speed": "80",
|
|
"cool_cds_fan_start_at_height": "0.5",
|
|
"cool_plate_temp": "100",
|
|
"cool_plate_temp_initial_layer": "100",
|
|
"cool_special_cds_fan_speed": "0",
|
|
"customized_plate_temp": "100",
|
|
"customized_plate_temp_initial_layer": "100",
|
|
"default_filament_colour": "\"\"",
|
|
"during_print_exhaust_fan_speed": "60",
|
|
"enable_overhang_bridge_fan": "1",
|
|
"enable_pressure_advance": "0",
|
|
"enable_special_area_additional_cooling_fan": "0",
|
|
"eng_plate_temp": "105",
|
|
"eng_plate_temp_initial_layer": "105",
|
|
"epoxy_resin_plate_temp": "0",
|
|
"epoxy_resin_plate_temp_initial_layer": "0",
|
|
"fan_cooling_layer_time": "30",
|
|
"fan_max_speed": "50",
|
|
"fan_min_speed": "10",
|
|
"filament_cooling_final_speed": "3.4",
|
|
"filament_cooling_initial_speed": "2.2",
|
|
"filament_cooling_moves": "4",
|
|
"filament_cost": "100",
|
|
"filament_density": "1.2",
|
|
"filament_deretraction_speed": "nil",
|
|
"filament_diameter": "1.75",
|
|
"filament_end_gcode": [
|
|
"; filament end gcode \n"
|
|
],
|
|
"filament_flow_ratio": "0.93",
|
|
"filament_is_support": "0",
|
|
"filament_load_time": "0",
|
|
"filament_loading_speed": "28",
|
|
"filament_loading_speed_start": "3",
|
|
"filament_max_volumetric_speed": "3",
|
|
"filament_minimal_purge_on_wipe_tower": "15",
|
|
"filament_multitool_ramming": "0",
|
|
"filament_multitool_ramming_flow": "10",
|
|
"filament_multitool_ramming_volume": "10",
|
|
"filament_notes": "\"\"",
|
|
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
|
"filament_retract_before_wipe": "80%",
|
|
"filament_retract_lift_above": "nil",
|
|
"filament_retract_lift_below": "nil",
|
|
"filament_retract_lift_enforce": "nil",
|
|
"filament_retract_restart_extra": "nil",
|
|
"filament_retract_when_changing_layer": "nil",
|
|
"filament_retraction_length": "1.2",
|
|
"filament_retraction_minimum_travel": "nil",
|
|
"filament_retraction_speed": "nil",
|
|
"filament_shrink": "100%",
|
|
"filament_soluble": "0",
|
|
"filament_start_gcode": [
|
|
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
|
],
|
|
"filament_toolchange_delay": "0",
|
|
"filament_type": [
|
|
"PA-CF"
|
|
],
|
|
"filament_unload_time": "0",
|
|
"filament_unloading_speed": "90",
|
|
"filament_unloading_speed_start": "100",
|
|
"filament_vendor": [
|
|
"Generic"
|
|
],
|
|
"filament_wipe": "nil",
|
|
"filament_wipe_distance": "nil",
|
|
"filament_z_hop": "nil",
|
|
"filament_z_hop_types": "nil",
|
|
"full_fan_speed_layer": "0",
|
|
"hot_plate_temp": "100",
|
|
"hot_plate_temp_initial_layer": "100",
|
|
"material_flow_dependent_temperature": "0",
|
|
"nozzle_temperature": "290",
|
|
"nozzle_temperature_initial_layer": "290",
|
|
"nozzle_temperature_range_high": "320",
|
|
"nozzle_temperature_range_low": "280",
|
|
"overhang_fan_speed": "70",
|
|
"overhang_fan_threshold": "10%",
|
|
"pressure_advance": "0.036",
|
|
"reduce_fan_stop_start_freq": "0",
|
|
"required_nozzle_HRC": "0",
|
|
"slow_down_for_layer_cooling": "1",
|
|
"slow_down_layer_time": "8",
|
|
"slow_down_min_speed": "10",
|
|
"support_material_interface_fan_speed": "-1",
|
|
"temperature_vitrification": "110",
|
|
"textured_plate_temp": "100",
|
|
"textured_plate_temp_initial_layer": "100"
|
|
} |