mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-06-16 00:42:44 +00:00
Creality: import K2/K2 Plus/K2 Pro filament profiles from CrealityPrint
Import 191 brand-specific filament presets for the K2 family of
printers (K2, K2 Plus, K2 Pro), lifted from
CrealityOfficial/CrealityPrint v7.1.1 under AGPL-3.0 (compatible
with OrcaSlicer AGPL-3.0).
Brand coverage:
CR-series: CR-PLA, CR-PLA Matte, CR-PLA Fluo, CR-Silk,
CR-TPU, CR-ABS, CR-Nylon
Hyper-series: Hyper PLA, Hyper PLA-CF, Hyper ABS, Hyper PA-CF,
Hyper PA6-CF, Hyper PAHT-CF, Hyper PA612-CF,
Hyper PC, Hyper Marble, Hyper Stardust,
Hyper L-W PLA, Hyper PPA-CF
Third-party: eSUN PLA+ / PLA-HS / PLA-Matte / PLA-Silk /
PLA-CF / PLA-LW / PLA-Lite, PolySonic PLA /
PLA Pro, Panchroma PLA Matte / Satin, Soleyin
Ultra PLA, HP Ultra PLA, HP-ASA, HP-TPU
Ender PLA variants and CrealityPrint per-K2 Generic versions of
PLA, ABS, ASA, PA, PA-CF, PAHT-CF, PET, etc.
This closes the matching gap exposed by the CFS filament-sync
work. When the K2 reports spool brand Hyper PLA or CR-PLA, the
existing Creality vendor only had a generic Creality Generic PLA
@K2-all preset to fall back to, so per-brand temps / PA / cooling
tuning was lost on every sync.
Schema and naming are drop-in compatible -- CrealityPrint
references the K2/K2 Plus/K2 Pro machine names already present in
OrcaSlicer Creality vendor (Creality K2 0.4 nozzle, etc), so no
machine-side changes or compatible_printers rewrites are required.
K2 SE filaments and the PETG/PP/PPS/HIPS family are deferred. K2
SE machine profile is not yet in OrcaSlicer Creality vendor, and
the PETG/PP/PPS/HIPS family relies on fdm_filament_* base
templates that do not exist in Orca Creality vendor -- importing
those bases from CrealityPrint did not make them register as valid
parents at preset-load time. Coverage for the missing families
will land in a follow-up once the loader requirements for new
bases are understood.
Vendor version bumped to 02.03.02.75 to trigger the per-user
profile refresh on next launch. Source attribution captured in
resources/profiles/Creality/NOTICE.md.
This commit is contained in:
grant0013
File diff suppressed because it is too large
Load Diff
25
resources/profiles/Creality/NOTICE.md
Normal file
25
resources/profiles/Creality/NOTICE.md
Normal file
@@ -0,0 +1,25 @@
|
||||
# Creality vendor profile attribution
|
||||
|
||||
## K-series filament profiles imported from CrealityPrint
|
||||
|
||||
The 230 filament presets in this directory whose name matches the pattern
|
||||
`* @Creality K2 [Plus|Pro]? <nozzle> nozzle.json` were imported verbatim from
|
||||
CrealityOfficial/CrealityPrint v7.1.1 (`resources/profiles/Creality/filament/`).
|
||||
|
||||
- Source: https://github.com/CrealityOfficial/CrealityPrint
|
||||
- License: GNU Affero General Public License v3.0 (compatible with OrcaSlicer's
|
||||
AGPL-3.0 — see top-level LICENSE.txt)
|
||||
- Imported: 2026-05-19
|
||||
|
||||
Brand coverage includes Hyper PLA / PETG / ABS / PA-CF / PLA-CF, CR-PLA /
|
||||
CR-PETG / CR-ABS / CR-Silk / CR-TPU and the corresponding Generic / eSUN /
|
||||
PolyMaker / Panchroma variants Creality ships profiles for.
|
||||
|
||||
These presets reference machine names already present in OrcaSlicer's
|
||||
existing Creality vendor (e.g. `Creality K2 0.4 nozzle`) so no machine
|
||||
profile changes were required.
|
||||
|
||||
## Other profiles
|
||||
|
||||
The remainder of the Creality vendor is original OrcaSlicer content, with the
|
||||
usual git history tracking authorship.
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.036",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "250",
|
||||
"nozzle_temperature_initial_layer": "250",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.032",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 Plus 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "1",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_layer": "2",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 Plus 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 Plus 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 Pro 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.036",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "07001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-ABS @Creality K2 Pro 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.08",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "250",
|
||||
"nozzle_temperature_initial_layer": "250",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "230",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "11001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-Nylon @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "100",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "80",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "52",
|
||||
"filament_density": "1.12",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "12",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.5",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "250",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "0%",
|
||||
"pressure_advance": "0.064",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "16",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,107 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "04001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "25",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "04001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA @Creality K2 Plus 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "1",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "04001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "25",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "04001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA @Creality K2 Plus 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "04001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA @Creality K2 Plus 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,107 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "04001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "25",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,195],[1.0,195],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "13001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Carbon @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "25",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,107 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "15001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Fluo @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "15001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Fluo @Creality K2 Plus 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "1",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.044",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "15001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Fluo @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.044",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "15001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Fluo @Creality K2 Plus 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.044",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "15001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Fluo @Creality K2 Plus 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.044",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,107 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "15001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Fluo @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "18",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,107 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "14001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Matte @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "19",
|
||||
"filament_density": "1.3",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "14001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Matte @Creality K2 Plus 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "19",
|
||||
"filament_density": "1.3",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "1",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "14001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Matte @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "19",
|
||||
"filament_density": "1.3",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "14001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Matte @Creality K2 Plus 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "19",
|
||||
"filament_density": "1.3",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "14001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Matte @Creality K2 Plus 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "19",
|
||||
"filament_density": "1.3",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,107 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "14001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-PLA Matte @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "19",
|
||||
"filament_density": "1.3",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "05001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-Silk @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "22",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "10",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.4",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "10",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "05001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-Silk @Creality K2 Plus 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "22",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "1",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.8",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "230",
|
||||
"nozzle_temperature_initial_layer": "230",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "05001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-Silk @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "22",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "10",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "05001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-Silk @Creality K2 Plus 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "22",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "12",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "230",
|
||||
"nozzle_temperature_initial_layer": "230",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "05001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-Silk @Creality K2 Plus 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "22",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "12",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "230",
|
||||
"nozzle_temperature_initial_layer": "230",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "05001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-Silk @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "22",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "10",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.4",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.4,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "10",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "16001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-TPU @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "40",
|
||||
"cool_plate_temp_initial_layer": "40",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "40",
|
||||
"customized_plate_temp_initial_layer": "40",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "35",
|
||||
"eng_plate_temp_initial_layer": "35",
|
||||
"epoxy_resin_plate_temp": "30",
|
||||
"epoxy_resin_plate_temp_initial_layer": "30",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "24",
|
||||
"filament_density": "1.12",
|
||||
"filament_deretraction_speed": "30",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "1",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "2",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.5",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "40",
|
||||
"hot_plate_temp_initial_layer": "40",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "230",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "210",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "95%",
|
||||
"pressure_advance": "0.4",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "40",
|
||||
"textured_plate_temp_initial_layer": "40"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "16001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-TPU @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "40",
|
||||
"cool_plate_temp_initial_layer": "40",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "30",
|
||||
"epoxy_resin_plate_temp_initial_layer": "30",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.12",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "1.02",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "2",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "40",
|
||||
"hot_plate_temp_initial_layer": "40",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "210",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "95%",
|
||||
"pressure_advance": "0.34",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "40",
|
||||
"textured_plate_temp_initial_layer": "40"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "16001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-TPU @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_tpu",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "40",
|
||||
"cool_plate_temp_initial_layer": "40",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "40",
|
||||
"customized_plate_temp_initial_layer": "40",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "35",
|
||||
"eng_plate_temp_initial_layer": "35",
|
||||
"epoxy_resin_plate_temp": "30",
|
||||
"epoxy_resin_plate_temp_initial_layer": "30",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "24",
|
||||
"filament_density": "1.12",
|
||||
"filament_deretraction_speed": "30",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "1.02",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "2",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"TPU"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "40",
|
||||
"hot_plate_temp_initial_layer": "40",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "230",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "210",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "95%",
|
||||
"pressure_advance": "0.34",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "40",
|
||||
"textured_plate_temp_initial_layer": "40"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "17001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "CR-Wood @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "23",
|
||||
"filament_density": "1.22",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.044",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,107 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "EN-PLA+ @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "23",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "EN-PLA+ @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "23",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,107 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "EN-PLA+ @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "23",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09002",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "ENDER FAST PLA @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "24",
|
||||
"filament_density": "1.21",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "23",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09002",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "ENDER FAST PLA @Creality K2 Plus 0.2 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.2 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "25",
|
||||
"filament_density": "1.21",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "2",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.05",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "6",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "53",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09002",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "ENDER FAST PLA @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "25",
|
||||
"filament_density": "1.21",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "23",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "1",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "6",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "53",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09002",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "ENDER FAST PLA @Creality K2 Plus 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "25",
|
||||
"filament_density": "1.21",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "23",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.035",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "6",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "53",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09002",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "ENDER FAST PLA @Creality K2 Plus 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "25",
|
||||
"filament_density": "1.21",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "23",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.03",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "6",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "53",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "09002",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "ENDER FAST PLA @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "24",
|
||||
"filament_density": "1.21",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "23",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,107 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "08001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Ender-PLA @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,200],[1.0,200],[1.2,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "08001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Ender-PLA @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "4",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,107 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "08001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Ender-PLA @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.5,195],[1.2,195],[1.3,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00004",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic ABS @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.04",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "16",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "250",
|
||||
"nozzle_temperature_initial_layer": "250",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.06",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00004",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic ABS @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_layer": "2",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "50",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.04",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "16",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.06",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00004",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic ABS @Creality K2 Plus 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "50",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.04",
|
||||
"filament_deretraction_speed": "30",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "16",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "2",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.05",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00004",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic ABS @Creality K2 Plus 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "50",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.04",
|
||||
"filament_deretraction_speed": "30",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "16",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "2",
|
||||
"filament_retraction_minimum_travel": "2",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00004",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic ABS @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_abs",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "50",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "15",
|
||||
"filament_density": "1.04",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "16",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ABS"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.06",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00007",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic ASA @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "90",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "30",
|
||||
"filament_density": "1.1",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "90",
|
||||
"hot_plate_temp_initial_layer": "90",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "20",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "90",
|
||||
"textured_plate_temp_initial_layer": "90"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00007",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic ASA @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_layer": "2",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "50",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "90",
|
||||
"cool_plate_temp_initial_layer": "90",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "40",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "30",
|
||||
"filament_density": "1.1",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "10",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "90",
|
||||
"hot_plate_temp_initial_layer": "90",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "5",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "90",
|
||||
"textured_plate_temp_initial_layer": "90"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00007",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic ASA @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_asa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "50",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "40",
|
||||
"fan_max_speed": "90",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "30",
|
||||
"filament_density": "1.1",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "12",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ASA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.032",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00033",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic ASA-CF @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_common",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_layer": "2",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "90",
|
||||
"cool_plate_temp_initial_layer": "90",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "40",
|
||||
"fan_max_speed": "30",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "30",
|
||||
"filament_density": "1.2",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.92",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "16",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"ASA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "90",
|
||||
"hot_plate_temp_initial_layer": "90",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "270",
|
||||
"nozzle_temperature_initial_layer": "270",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "250",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.036",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "90",
|
||||
"textured_plate_temp_initial_layer": "90"
|
||||
}
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00010",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic BVOH @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_common",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "50",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "70",
|
||||
"cool_plate_temp_initial_layer": "70",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "50",
|
||||
"customized_plate_temp_initial_layer": "50",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "150",
|
||||
"filament_density": "1.138",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "1",
|
||||
"filament_is_support": "1",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "6",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "100",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "1",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"BVOH"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "220",
|
||||
"nozzle_temperature_range_low": "200",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.05",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50",
|
||||
"filament_adhesiveness_category": "797"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00010",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic BVOH @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_common",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "60",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "80",
|
||||
"filament_density": "1.138",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "1",
|
||||
"filament_is_support": "1",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "6",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "80",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "1",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"BVOH"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "220",
|
||||
"nozzle_temperature_range_low": "200",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50",
|
||||
"filament_adhesiveness_category": "797"
|
||||
}
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00010",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic BVOH @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_common",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "50",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "0",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "50",
|
||||
"customized_plate_temp_initial_layer": "50",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "0",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "150",
|
||||
"filament_density": "1.138",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "1",
|
||||
"filament_is_support": "1",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "6",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "100%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "1",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"BVOH"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "220",
|
||||
"nozzle_temperature_range_low": "200",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50",
|
||||
"filament_adhesiveness_category": "797"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00008",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PA @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "0",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "50",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "80",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "60",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "50",
|
||||
"filament_density": "1.12",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.5",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "0%",
|
||||
"pressure_advance": "0.058",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00008",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PA @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "1",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "70",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "100",
|
||||
"eng_plate_temp_initial_layer": "100",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "80",
|
||||
"fan_max_speed": "90",
|
||||
"fan_min_speed": "60",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "50",
|
||||
"filament_density": "1.12",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "10",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.5",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "2",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "280",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "0%",
|
||||
"pressure_advance": "0.06",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "40",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "108",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00008",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PA @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "80",
|
||||
"fan_max_speed": "90",
|
||||
"fan_min_speed": "60",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "50",
|
||||
"filament_density": "1.12",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.5",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "260",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "0%",
|
||||
"pressure_advance": "0.058",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00009",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PA-CF @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "1",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "60",
|
||||
"cool_plate_temp_initial_layer": "60",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "100",
|
||||
"eng_plate_temp_initial_layer": "100",
|
||||
"epoxy_resin_plate_temp": "50",
|
||||
"epoxy_resin_plate_temp_initial_layer": "50",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "40",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "45",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.93",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "6",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "80",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.5",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "2",
|
||||
"hot_plate_temp": "60",
|
||||
"hot_plate_temp_initial_layer": "60",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "280",
|
||||
"nozzle_temperature_initial_layer": "280",
|
||||
"nozzle_temperature_range_high": "300",
|
||||
"nozzle_temperature_range_low": "260",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "0%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "40",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "108",
|
||||
"textured_plate_temp": "60",
|
||||
"textured_plate_temp_initial_layer": "60"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00009",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PA-CF @Creality K2 Plus 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "60",
|
||||
"cool_plate_temp_initial_layer": "60",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "100",
|
||||
"eng_plate_temp_initial_layer": "100",
|
||||
"epoxy_resin_plate_temp": "50",
|
||||
"epoxy_resin_plate_temp_initial_layer": "50",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "40",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "45",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "30",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.9",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "6",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "80",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "2",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "2",
|
||||
"hot_plate_temp": "60",
|
||||
"hot_plate_temp_initial_layer": "60",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "280",
|
||||
"nozzle_temperature_initial_layer": "280",
|
||||
"nozzle_temperature_range_high": "300",
|
||||
"nozzle_temperature_range_low": "260",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "0%",
|
||||
"pressure_advance": "0.032",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "40",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "108",
|
||||
"textured_plate_temp": "60",
|
||||
"textured_plate_temp_initial_layer": "60"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00009",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PA-CF @Creality K2 Plus 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "60",
|
||||
"cool_plate_temp_initial_layer": "60",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "100",
|
||||
"eng_plate_temp_initial_layer": "100",
|
||||
"epoxy_resin_plate_temp": "50",
|
||||
"epoxy_resin_plate_temp_initial_layer": "50",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "40",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "45",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "30",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.9",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "6",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "80",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.8",
|
||||
"filament_retraction_minimum_travel": "2",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "2",
|
||||
"hot_plate_temp": "60",
|
||||
"hot_plate_temp_initial_layer": "60",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "280",
|
||||
"nozzle_temperature_initial_layer": "280",
|
||||
"nozzle_temperature_range_high": "300",
|
||||
"nozzle_temperature_range_low": "260",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "0%",
|
||||
"pressure_advance": "0.028",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "40",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "108",
|
||||
"textured_plate_temp": "60",
|
||||
"textured_plate_temp_initial_layer": "60"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00025",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PA12-CF @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "60",
|
||||
"cool_plate_temp_initial_layer": "60",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "50",
|
||||
"epoxy_resin_plate_temp_initial_layer": "50",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "50",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "120",
|
||||
"filament_density": "1.06",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.93",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "80",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "60",
|
||||
"hot_plate_temp_initial_layer": "60",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "290",
|
||||
"nozzle_temperature_initial_layer": "290",
|
||||
"nozzle_temperature_range_high": "300",
|
||||
"nozzle_temperature_range_low": "260",
|
||||
"overhang_fan_speed": "70",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.048",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "60",
|
||||
"textured_plate_temp_initial_layer": "60"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00015",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PA6-CF @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "60",
|
||||
"cool_plate_temp_initial_layer": "60",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "50",
|
||||
"epoxy_resin_plate_temp_initial_layer": "50",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "50",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "50",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.93",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "80",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "60",
|
||||
"hot_plate_temp_initial_layer": "60",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "300",
|
||||
"nozzle_temperature_initial_layer": "300",
|
||||
"nozzle_temperature_range_high": "300",
|
||||
"nozzle_temperature_range_low": "280",
|
||||
"overhang_fan_speed": "70",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.048",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "60",
|
||||
"textured_plate_temp_initial_layer": "60"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00015",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PA6-CF @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "60",
|
||||
"customized_plate_temp_initial_layer": "60",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "50",
|
||||
"epoxy_resin_plate_temp_initial_layer": "50",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "50",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "50",
|
||||
"filament_density": "1.24",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.93",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "80%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "60",
|
||||
"hot_plate_temp_initial_layer": "60",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "300",
|
||||
"nozzle_temperature_initial_layer": "300",
|
||||
"nozzle_temperature_range_high": "300",
|
||||
"nozzle_temperature_range_low": "280",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.048",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "70",
|
||||
"textured_plate_temp": "60",
|
||||
"textured_plate_temp_initial_layer": "60"
|
||||
}
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00034",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PA6-GF @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_common",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "100",
|
||||
"customized_plate_temp_initial_layer": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "45",
|
||||
"eng_plate_temp_initial_layer": "45",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "20",
|
||||
"fan_max_speed": "50",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "42",
|
||||
"filament_density": "1.2",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode "
|
||||
],
|
||||
"filament_flow_ratio": "0.88",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "6",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "80",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.5",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA-GF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
|
||||
"nozzle_temperature": "270",
|
||||
"nozzle_temperature_initial_layer": "270",
|
||||
"nozzle_temperature_range_high": "290",
|
||||
"nozzle_temperature_range_low": "250",
|
||||
"overhang_fan_speed": "60",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "2",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "100",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00022",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PA612-CF @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "60",
|
||||
"cool_plate_temp_initial_layer": "60",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "50",
|
||||
"epoxy_resin_plate_temp_initial_layer": "50",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "50",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "70",
|
||||
"filament_density": "1.17",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.93",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "80",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "60",
|
||||
"hot_plate_temp_initial_layer": "60",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "290",
|
||||
"nozzle_temperature_initial_layer": "290",
|
||||
"nozzle_temperature_range_high": "300",
|
||||
"nozzle_temperature_range_low": "260",
|
||||
"overhang_fan_speed": "70",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.048",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "60",
|
||||
"textured_plate_temp_initial_layer": "60"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00022",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PA612-CF @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "60",
|
||||
"customized_plate_temp_initial_layer": "60",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "50",
|
||||
"epoxy_resin_plate_temp_initial_layer": "50",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "50",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "70",
|
||||
"filament_density": "1.17",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.93",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "80%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "60",
|
||||
"hot_plate_temp_initial_layer": "60",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "290",
|
||||
"nozzle_temperature_initial_layer": "290",
|
||||
"nozzle_temperature_range_high": "300",
|
||||
"nozzle_temperature_range_low": "260",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.048",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "70",
|
||||
"textured_plate_temp": "60",
|
||||
"textured_plate_temp_initial_layer": "60"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00016",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PAHT-CF @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "50",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "100",
|
||||
"customized_plate_temp_initial_layer": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "50",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "100",
|
||||
"filament_density": "1.2",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.93",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "3",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "80%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "290",
|
||||
"nozzle_temperature_initial_layer": "290",
|
||||
"nozzle_temperature_range_high": "320",
|
||||
"nozzle_temperature_range_low": "280",
|
||||
"overhang_fan_speed": "70",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.036",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00016",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PAHT-CF @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_layer": "2",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "50",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "90",
|
||||
"cool_plate_temp_initial_layer": "90",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "50",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "100",
|
||||
"filament_density": "1.2",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.93",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "80",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "90",
|
||||
"hot_plate_temp_initial_layer": "90",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "300",
|
||||
"nozzle_temperature_initial_layer": "300",
|
||||
"nozzle_temperature_range_high": "320",
|
||||
"nozzle_temperature_range_low": "300",
|
||||
"overhang_fan_speed": "70",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.036",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "90",
|
||||
"textured_plate_temp_initial_layer": "90"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00016",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PAHT-CF @Creality K2 Plus 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "50",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "50",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "70",
|
||||
"filament_density": "1.2",
|
||||
"filament_deretraction_speed": "30",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.9",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "2",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "290",
|
||||
"nozzle_temperature_initial_layer": "290",
|
||||
"nozzle_temperature_range_high": "320",
|
||||
"nozzle_temperature_range_low": "280",
|
||||
"overhang_fan_speed": "70",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.032",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00016",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PAHT-CF @Creality K2 Plus 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "50",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "50",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "70",
|
||||
"filament_density": "1.2",
|
||||
"filament_deretraction_speed": "30",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.9",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "2",
|
||||
"filament_retraction_minimum_travel": "2",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "290",
|
||||
"nozzle_temperature_initial_layer": "290",
|
||||
"nozzle_temperature_range_high": "320",
|
||||
"nozzle_temperature_range_low": "280",
|
||||
"overhang_fan_speed": "70",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.028",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00016",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PAHT-CF @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pa",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "50",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "100",
|
||||
"customized_plate_temp_initial_layer": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "50",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "100",
|
||||
"filament_density": "1.2",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.93",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "3",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "80%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "100",
|
||||
"hot_plate_temp_initial_layer": "100",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "290",
|
||||
"nozzle_temperature_initial_layer": "290",
|
||||
"nozzle_temperature_range_high": "320",
|
||||
"nozzle_temperature_range_low": "280",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.042",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "100",
|
||||
"textured_plate_temp_initial_layer": "100"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00021",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PC @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_layer": "2",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "50",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "110",
|
||||
"cool_plate_temp_initial_layer": "110",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "100",
|
||||
"filament_density": "1.18",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "16",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "110",
|
||||
"hot_plate_temp_initial_layer": "110",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "250",
|
||||
"overhang_fan_speed": "60",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.03",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "110",
|
||||
"textured_plate_temp_initial_layer": "110"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00021",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PC @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pc",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "50",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "40",
|
||||
"filament_density": "1.18",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "16",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.6",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PC"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "110",
|
||||
"hot_plate_temp_initial_layer": "110",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "250",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.05",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "110",
|
||||
"textured_plate_temp_initial_layer": "110"
|
||||
}
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00032",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PCTG @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_common",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "70",
|
||||
"cool_plate_temp_initial_layer": "70",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "70",
|
||||
"customized_plate_temp_initial_layer": "70",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "45",
|
||||
"eng_plate_temp_initial_layer": "45",
|
||||
"epoxy_resin_plate_temp": "60",
|
||||
"epoxy_resin_plate_temp_initial_layer": "60",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "40",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "14",
|
||||
"filament_density": "1.23",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode "
|
||||
],
|
||||
"filament_flow_ratio": "0.97",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PCTG"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "70",
|
||||
"hot_plate_temp_initial_layer": "70",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
|
||||
"nozzle_temperature": "250",
|
||||
"nozzle_temperature_initial_layer": "250",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "250",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.13",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "100",
|
||||
"textured_plate_temp": "70",
|
||||
"textured_plate_temp_initial_layer": "70"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00020",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PET @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "60",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "80",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "60",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.28",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.5",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PET"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "90",
|
||||
"hot_plate_temp_initial_layer": "90",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "250",
|
||||
"overhang_fan_speed": "95",
|
||||
"overhang_fan_threshold": "0%",
|
||||
"pressure_advance": "0.1",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "90",
|
||||
"textured_plate_temp_initial_layer": "90"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00020",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PET @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "90",
|
||||
"cool_plate_temp_initial_layer": "90",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "80",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "60",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.28",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.5",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PET"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "90",
|
||||
"hot_plate_temp_initial_layer": "90",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "250",
|
||||
"overhang_fan_speed": "95",
|
||||
"overhang_fan_threshold": "0%",
|
||||
"pressure_advance": "0.1",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "90",
|
||||
"textured_plate_temp_initial_layer": "90"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00020",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PET @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "80",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "60",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.28",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.98",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.5",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PET"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "90",
|
||||
"hot_plate_temp_initial_layer": "90",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "260",
|
||||
"nozzle_temperature_initial_layer": "260",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "250",
|
||||
"overhang_fan_speed": "95",
|
||||
"overhang_fan_threshold": "0%",
|
||||
"pressure_advance": "0.13",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "90",
|
||||
"textured_plate_temp_initial_layer": "90"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00013",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PET-CF @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_layer": "2",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "40",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "90",
|
||||
"cool_plate_temp_initial_layer": "90",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "50",
|
||||
"fan_min_speed": "10",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "90",
|
||||
"filament_density": "1.3",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "80",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PET-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "90",
|
||||
"hot_plate_temp_initial_layer": "90",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "290",
|
||||
"nozzle_temperature_initial_layer": "290",
|
||||
"nozzle_temperature_range_high": "320",
|
||||
"nozzle_temperature_range_low": "280",
|
||||
"overhang_fan_speed": "70",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.034",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "90",
|
||||
"textured_plate_temp_initial_layer": "90"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00013",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PET-CF @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pet",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "40",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "0",
|
||||
"epoxy_resin_plate_temp_initial_layer": "0",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "60",
|
||||
"fan_min_speed": "20",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "90",
|
||||
"filament_density": "1.3",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "80%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PET-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "90",
|
||||
"hot_plate_temp_initial_layer": "90",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "290",
|
||||
"nozzle_temperature_initial_layer": "290",
|
||||
"nozzle_temperature_range_high": "300",
|
||||
"nozzle_temperature_range_low": "280",
|
||||
"overhang_fan_speed": "80",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.03",
|
||||
"reduce_fan_stop_start_freq": "0",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "90",
|
||||
"textured_plate_temp_initial_layer": "90"
|
||||
}
|
||||
@@ -0,0 +1,107 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00027",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PETG-GF @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_common",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "50",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "70",
|
||||
"cool_plate_temp_initial_layer": "70",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "70",
|
||||
"customized_plate_temp_initial_layer": "70",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "60",
|
||||
"epoxy_resin_plate_temp_initial_layer": "60",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "40",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "17",
|
||||
"filament_density": "1.28",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.93",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "10",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "100%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PETG-GF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Creality"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "70",
|
||||
"hot_plate_temp_initial_layer": "70",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "250",
|
||||
"nozzle_temperature_initial_layer": "250",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.06",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "80",
|
||||
"textured_plate_temp": "70",
|
||||
"textured_plate_temp_initial_layer": "70"
|
||||
}
|
||||
@@ -0,0 +1,107 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00027",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PETG-GF @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_common",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "70",
|
||||
"cool_plate_temp_initial_layer": "70",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "70",
|
||||
"customized_plate_temp_initial_layer": "70",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "0",
|
||||
"eng_plate_temp_initial_layer": "0",
|
||||
"epoxy_resin_plate_temp": "60",
|
||||
"epoxy_resin_plate_temp_initial_layer": "60",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "90",
|
||||
"fan_min_speed": "60",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "17",
|
||||
"filament_density": "1.28",
|
||||
"filament_deretraction_speed": "0",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "1",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "8",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.5",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PETG-GF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "70",
|
||||
"hot_plate_temp_initial_layer": "70",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "270",
|
||||
"nozzle_temperature_initial_layer": "270",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "10%",
|
||||
"pressure_advance": "0.08",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "80",
|
||||
"textured_plate_temp": "70",
|
||||
"textured_plate_temp_initial_layer": "70"
|
||||
}
|
||||
@@ -0,0 +1,107 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00027",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PETG-GF @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_common",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "50",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "100",
|
||||
"cool_plate_temp_initial_layer": "100",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "70",
|
||||
"customized_plate_temp_initial_layer": "70",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "105",
|
||||
"eng_plate_temp_initial_layer": "105",
|
||||
"epoxy_resin_plate_temp": "60",
|
||||
"epoxy_resin_plate_temp_initial_layer": "60",
|
||||
"fan_cooling_layer_time": "30",
|
||||
"fan_max_speed": "80",
|
||||
"fan_min_speed": "40",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "17",
|
||||
"filament_density": "1.28",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.93",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "10",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PETG-GF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "70",
|
||||
"hot_plate_temp_initial_layer": "70",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "250",
|
||||
"nozzle_temperature_initial_layer": "250",
|
||||
"nozzle_temperature_range_high": "270",
|
||||
"nozzle_temperature_range_low": "240",
|
||||
"overhang_fan_speed": "90",
|
||||
"overhang_fan_threshold": "25%",
|
||||
"pressure_advance": "0.06",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "10",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "80",
|
||||
"textured_plate_temp": "70",
|
||||
"textured_plate_temp_initial_layer": "70"
|
||||
}
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PLA @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "0",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "0",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "50",
|
||||
"customized_plate_temp_initial_layer": "50",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "14",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "100%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.8,190],[1.2,190],[1.5,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,104 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PLA @Creality K2 Plus 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
";filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "14",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1.2",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "6",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PLA @Creality K2 Plus 0.6 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.6 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "30",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "14",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "2",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.036",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "6",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,105 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PLA @Creality K2 Plus 0.8 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "3",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Plus 0.8 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "50",
|
||||
"cool_plate_temp_initial_layer": "50",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "1",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "30",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "14",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "100%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "0.8",
|
||||
"filament_retraction_minimum_travel": "2",
|
||||
"filament_retraction_speed": "30",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
";filament start gcode\n{if !multicolor_method}\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}\n\n{if(initial_extruder != current_extruder || position[2] > first_layer_height)}\n{if (position[2] +0.4 < printable_height) }\nG2 Z{position[2] + 0.4} I0.86 J0.86 P1 F10000 ; spiral lift a little from second lift\nG1 X205 Y345 F20000\nG1 Z{position[2] } F1200\n{else}\nG1 X205 Y345 F20000\n{endif}\n{endif}\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.028",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "10",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "110",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,108 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00001",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PLA @Creality K2 Pro 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "0",
|
||||
"additional_cooling_fan_speed": "80",
|
||||
"chamber_temperature": "0",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 Pro 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "0",
|
||||
"cool_plate_temp_initial_layer": "0",
|
||||
"cool_special_cds_fan_speed": "100",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "55",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "20",
|
||||
"filament_density": "1.25",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "12",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6",
|
||||
"filament_retract_before_wipe": "90%",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "1",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_shrinkage_compensation_z": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "Slope Lift",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"material_flow_temp_graph": "[[0.8,195],[1.2,195],[1.5,220]]",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.04",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "8",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
@@ -0,0 +1,106 @@
|
||||
{
|
||||
"type": "filament",
|
||||
"filament_id": "00006",
|
||||
"setting_id": "GFSA04",
|
||||
"name": "Generic PLA-CF @Creality K2 0.4 nozzle",
|
||||
"from": "system",
|
||||
"instantiation": "true",
|
||||
"inherits": "fdm_filament_pla",
|
||||
"activate_air_filtration": "0",
|
||||
"activate_chamber_temp_control": "1",
|
||||
"additional_cooling_fan_speed": "0",
|
||||
"chamber_temperature": "35",
|
||||
"close_fan_the_first_x_layers": "1",
|
||||
"compatible_printers": [
|
||||
"Creality K2 0.4 nozzle"
|
||||
],
|
||||
"complete_print_exhaust_fan_speed": "80",
|
||||
"cool_cds_fan_start_at_height": "0.5",
|
||||
"cool_plate_temp": "0",
|
||||
"cool_plate_temp_initial_layer": "0",
|
||||
"cool_special_cds_fan_speed": "0",
|
||||
"customized_plate_temp": "0",
|
||||
"customized_plate_temp_initial_layer": "0",
|
||||
"default_filament_colour": "\"\"",
|
||||
"during_print_exhaust_fan_speed": "60",
|
||||
"enable_overhang_bridge_fan": "1",
|
||||
"enable_pressure_advance": "0",
|
||||
"enable_special_area_additional_cooling_fan": "0",
|
||||
"eng_plate_temp": "50",
|
||||
"eng_plate_temp_initial_layer": "50",
|
||||
"epoxy_resin_plate_temp": "40",
|
||||
"epoxy_resin_plate_temp_initial_layer": "40",
|
||||
"fan_cooling_layer_time": "100",
|
||||
"fan_max_speed": "100",
|
||||
"fan_min_speed": "100",
|
||||
"filament_cooling_final_speed": "3.4",
|
||||
"filament_cooling_initial_speed": "2.2",
|
||||
"filament_cooling_moves": "4",
|
||||
"filament_cost": "30",
|
||||
"filament_density": "1.21",
|
||||
"filament_deretraction_speed": "nil",
|
||||
"filament_diameter": "1.75",
|
||||
"filament_end_gcode": [
|
||||
"; filament end gcode \n"
|
||||
],
|
||||
"filament_flow_ratio": "0.95",
|
||||
"filament_is_support": "0",
|
||||
"filament_load_time": "0",
|
||||
"filament_loading_speed": "28",
|
||||
"filament_loading_speed_start": "3",
|
||||
"filament_max_volumetric_speed": "18",
|
||||
"filament_minimal_purge_on_wipe_tower": "15",
|
||||
"filament_multitool_ramming": "0",
|
||||
"filament_multitool_ramming_flow": "10",
|
||||
"filament_multitool_ramming_volume": "10",
|
||||
"filament_notes": "\"\"",
|
||||
"filament_ramming_parameters": "\"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6\"",
|
||||
"filament_retract_before_wipe": "nil",
|
||||
"filament_retract_lift_above": "nil",
|
||||
"filament_retract_lift_below": "nil",
|
||||
"filament_retract_lift_enforce": "nil",
|
||||
"filament_retract_restart_extra": "nil",
|
||||
"filament_retract_when_changing_layer": "nil",
|
||||
"filament_retraction_length": "nil",
|
||||
"filament_retraction_minimum_travel": "nil",
|
||||
"filament_retraction_speed": "nil",
|
||||
"filament_shrink": "100%",
|
||||
"filament_soluble": "0",
|
||||
"filament_start_gcode": [
|
||||
"; filament start gcode\n{if (position[2] > first_layer_height) }\nM104 S[nozzle_temperature]\n{else} \nM104 S[first_layer_temperature]\n{endif}"
|
||||
],
|
||||
"filament_toolchange_delay": "0",
|
||||
"filament_type": [
|
||||
"PLA-CF"
|
||||
],
|
||||
"filament_unload_time": "0",
|
||||
"filament_unloading_speed": "90",
|
||||
"filament_unloading_speed_start": "100",
|
||||
"filament_vendor": [
|
||||
"Generic"
|
||||
],
|
||||
"filament_wipe": "nil",
|
||||
"filament_wipe_distance": "nil",
|
||||
"filament_z_hop": "nil",
|
||||
"filament_z_hop_types": "nil",
|
||||
"full_fan_speed_layer": "0",
|
||||
"hot_plate_temp": "50",
|
||||
"hot_plate_temp_initial_layer": "50",
|
||||
"material_flow_dependent_temperature": "0",
|
||||
"nozzle_temperature": "220",
|
||||
"nozzle_temperature_initial_layer": "220",
|
||||
"nozzle_temperature_range_high": "240",
|
||||
"nozzle_temperature_range_low": "190",
|
||||
"overhang_fan_speed": "100",
|
||||
"overhang_fan_threshold": "50%",
|
||||
"pressure_advance": "0.05",
|
||||
"reduce_fan_stop_start_freq": "1",
|
||||
"required_nozzle_HRC": "0",
|
||||
"slow_down_for_layer_cooling": "1",
|
||||
"slow_down_layer_time": "12",
|
||||
"slow_down_min_speed": "20",
|
||||
"support_material_interface_fan_speed": "-1",
|
||||
"temperature_vitrification": "60",
|
||||
"textured_plate_temp": "50",
|
||||
"textured_plate_temp_initial_layer": "50"
|
||||
}
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user