mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-08 17:57:44 +00:00
bf20b041e2
A filament_id is now exactly what the preset's own filament_vendor, filament_type and filament name mint, wherever it inherits from. Inheriting settings no longer limits what a preset may claim, so the checks that policed inheritance are gone, and so are the four grandfather lists that held thousands of presets as permanent exceptions. The snapshot records sanctioned state rather than excuses: one entry per id, carrying the product it names beside the presets claiming it. Profiles that disagreed are corrected instead of excused. The Elegoo TPU and PAHT roots were named for a different product than all of their variants and become TPU 95A and PAHT-CF; Elegoo PET-CF gains the filament_type its variants already set; the Snapmaker breakaway support presets get an id of their own rather than riding the PVA chain; and a BBL preset name carrying a doubled space is fixed behind renamed_from. Their ids re-mint from the corrected identities. The tooling and the design note also drop the word "family", which invited reading a brand's Lite and Pro spools as one id. No change to slicing output — only filament_id values, three preset names, the inherits lines following those renames and the vendor indexes move.
74 lines
1.6 KiB
JSON
74 lines
1.6 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Elegoo PAHT-CF @System",
|
|
"inherits": "Elegoo PAHT-CF @base",
|
|
"from": "system",
|
|
"setting_id": "S073oXCeOlTEqh6L",
|
|
"instantiation": "true",
|
|
"renamed_from": "Elegoo PAHT-CF",
|
|
"close_fan_the_first_x_layers": [
|
|
"3"
|
|
],
|
|
"fan_cooling_layer_time": [
|
|
"5"
|
|
],
|
|
"fan_max_speed": [
|
|
"30"
|
|
],
|
|
"fan_min_speed": [
|
|
"10"
|
|
],
|
|
"filament_flow_ratio": [
|
|
"0.96"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"6"
|
|
],
|
|
"filament_multitool_ramming_flow": [
|
|
"6"
|
|
],
|
|
"nozzle_temperature": [
|
|
"290"
|
|
],
|
|
"nozzle_temperature_initial_layer": [
|
|
"290"
|
|
],
|
|
"nozzle_temperature_range_high": [
|
|
"290"
|
|
],
|
|
"nozzle_temperature_range_low": [
|
|
"260"
|
|
],
|
|
"overhang_fan_speed": [
|
|
"40"
|
|
],
|
|
"overhang_fan_threshold": [
|
|
"0%"
|
|
],
|
|
"reduce_fan_stop_start_freq": [
|
|
"0"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"2"
|
|
],
|
|
"slow_down_min_speed": [
|
|
"10"
|
|
],
|
|
"textured_plate_temp": [
|
|
"100"
|
|
],
|
|
"textured_plate_temp_initial_layer": [
|
|
"100"
|
|
],
|
|
"pressure_advance": [
|
|
"0.052"
|
|
],
|
|
"enable_pressure_advance": [
|
|
"1"
|
|
],
|
|
"filament_start_gcode": [
|
|
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
|
],
|
|
"compatible_printers": []
|
|
}
|