mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-14 00:52:04 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
152 lines
4.1 KiB
JSON
152 lines
4.1 KiB
JSON
{
|
|
"type": "machine",
|
|
"name": "fdm_q_common",
|
|
"inherits": "fdm_qidi_x3_common",
|
|
"from": "system",
|
|
"instantiation": "false",
|
|
"printer_technology": "FFF",
|
|
"auxiliary_fan": "1",
|
|
"before_layer_change_gcode": "",
|
|
"change_filament_gcode": "",
|
|
"default_print_profile": "0.20mm Standard @Q1 Pro",
|
|
"deretraction_speed": [
|
|
"30"
|
|
],
|
|
"extruder_clearance_height_to_lid": "140",
|
|
"extruder_clearance_height_to_rod": "36",
|
|
"extruder_clearance_radius": "65",
|
|
"extruder_colour": [
|
|
"#FCE94F"
|
|
],
|
|
"extruder_offset": [
|
|
"0x0"
|
|
],
|
|
"gcode_flavor": "klipper",
|
|
"layer_change_gcode": "",
|
|
"machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{max_layer_z + 3} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",
|
|
"machine_load_filament_time": "0",
|
|
"machine_max_acceleration_e": [
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_extruding": [
|
|
"20000",
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_retracting": [
|
|
"5000",
|
|
"5000"
|
|
],
|
|
"machine_max_acceleration_travel": [
|
|
"9000",
|
|
"9000"
|
|
],
|
|
"machine_max_acceleration_x": [
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_y": [
|
|
"20000"
|
|
],
|
|
"machine_max_acceleration_z": [
|
|
"500"
|
|
],
|
|
"machine_max_jerk_e": [
|
|
"2"
|
|
],
|
|
"machine_max_jerk_x": [
|
|
"8"
|
|
],
|
|
"machine_max_jerk_y": [
|
|
"8"
|
|
],
|
|
"machine_max_jerk_z": [
|
|
"3"
|
|
],
|
|
"machine_max_speed_e": [
|
|
"30"
|
|
],
|
|
"machine_max_speed_x": [
|
|
"600"
|
|
],
|
|
"machine_max_speed_y": [
|
|
"600"
|
|
],
|
|
"machine_max_speed_z": [
|
|
"10"
|
|
],
|
|
"machine_min_extruding_rate": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"machine_min_travel_rate": [
|
|
"0",
|
|
"0"
|
|
],
|
|
"machine_pause_gcode": "M0",
|
|
"machine_start_gcode": "PRINT_START\nG28\nM141 S0\nG0 Z50 F600\nM190 S[bed_temperature_initial_layer_single]\nG28 Z\nG29; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[nozzle_temperature_initial_layer]\nM106 P3 S255\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 12} E{-10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 E{10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\n",
|
|
"machine_switch_extruder_time": "0",
|
|
"machine_unload_filament_time": "0",
|
|
"max_layer_height": [
|
|
"0.32"
|
|
],
|
|
"min_layer_height": [
|
|
"0.08"
|
|
],
|
|
"nozzle_diameter": [
|
|
"0.4"
|
|
],
|
|
"nozzle_type": [
|
|
"stainless_steel"
|
|
],
|
|
"printable_height": "250",
|
|
"printer_settings_id": "",
|
|
"printer_structure": "corexy",
|
|
"printer_variant": "0.4",
|
|
"retract_before_wipe": [
|
|
"0%"
|
|
],
|
|
"retract_length_toolchange": [
|
|
"2"
|
|
],
|
|
"retract_restart_extra_toolchange": [
|
|
"0"
|
|
],
|
|
"retract_restart_extra": [
|
|
"0"
|
|
],
|
|
"retract_when_changing_layer": [
|
|
"1"
|
|
],
|
|
"retraction_length": [
|
|
"0.8"
|
|
],
|
|
"retraction_minimum_travel": [
|
|
"1"
|
|
],
|
|
"retraction_speed": [
|
|
"30"
|
|
],
|
|
"scan_first_layer": "0",
|
|
"silent_mode": "0",
|
|
"single_extruder_multi_material": "1",
|
|
"wipe_tower_type": "type1",
|
|
"support_air_filtration": [
|
|
"1"
|
|
],
|
|
"support_box_temp_control": "0",
|
|
"support_chamber_temp_control": "1",
|
|
"thumbnail_size": [
|
|
"380x380",
|
|
"210x210",
|
|
"110x110"
|
|
],
|
|
"wipe": [
|
|
"1"
|
|
],
|
|
"z_hop_types": [
|
|
"Auto Lift"
|
|
],
|
|
"z_hop": [
|
|
"0.4"
|
|
]
|
|
}
|