{
	"type": "machine",
	"name": "fdm_q_common",
	"inherits": "fdm_qidi_x3_common",
	"from": "system",
	"instantiation": "false",
	"printer_technology": "FFF",
	"auxiliary_fan": "1",
	"before_layer_change_gcode": "",
	"change_filament_gcode": "",
	"default_print_profile": "0.20mm Standard @Q1 Pro",
	"deretraction_speed": [
		"30"
	],
	"extruder_clearance_height_to_lid": "140",
	"extruder_clearance_height_to_rod": "36",
	"extruder_clearance_radius": "65",
	"extruder_colour": [
		"#FCE94F"
	],
	"extruder_offset": [
		"0x0"
	],
	"gcode_flavor": "klipper",
	"layer_change_gcode": "",
	"machine_end_gcode": "M141 S0\nM104 S0\nM140 S0\nG1 E-3 F1800\nG0 Z{max_layer_z + 3} F600\nG0 X0 Y0 F12000\n{if max_layer_z < max_print_height / 2}G1 Z{max_print_height / 2 + 10} F600{else}G1 Z{min(max_print_height, max_layer_z + 3)}{endif}",
	"machine_load_filament_time": "0",
	"machine_max_acceleration_e": [
		"5000"
	],
	"machine_max_acceleration_extruding": [
		"20000",
		"20000"
	],
	"machine_max_acceleration_retracting": [
		"5000",
		"5000"
	],
	"machine_max_acceleration_travel": [
		"9000",
		"9000"
	],
	"machine_max_acceleration_x": [
		"20000"
	],
	"machine_max_acceleration_y": [
		"20000"
	],
	"machine_max_acceleration_z": [
		"500"
	],
	"machine_max_jerk_e": [
		"2"
	],
	"machine_max_jerk_x": [
		"8"
	],
	"machine_max_jerk_y": [
		"8"
	],
	"machine_max_jerk_z": [
		"3"
	],
	"machine_max_speed_e": [
		"30"
	],
	"machine_max_speed_x": [
		"600"
	],
	"machine_max_speed_y": [
		"600"
	],
	"machine_max_speed_z": [
		"10"
	],
	"machine_min_extruding_rate": [
		"0",
		"0"
	],
	"machine_min_travel_rate": [
		"0",
		"0"
	],
	"machine_pause_gcode": "M0",
	"machine_start_gcode": "PRINT_START\nG28\nM141 S0\nG0 Z50 F600\nM190 S[bed_temperature_initial_layer_single]\nG28 Z\nG29; mesh bed leveling ,comment this code to close it\nG0 X0 Y0 Z50 F6000\nM109 S[nozzle_temperature_initial_layer]\nM106 P3 S255\nM83\nG4 P3000\nG0 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0)} Z5 F6000\nG0 Z[initial_layer_print_height] F600\nG1 E3 F1800\nG1 X{(min(print_bed_max[0], first_layer_print_min[0] + 80))} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0)} E{85 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 85} E{83 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 2} E{2 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 Y{max((min(print_bed_max[1], first_layer_print_min[1] + 80) - 85),0) + 3} E{82 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 X{max((min(print_bed_max[0], first_layer_print_min[0] + 80) - 85),0) + 12} E{-10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\nG1 E{10 * 0.5 * initial_layer_print_height * nozzle_diameter[0]} F3000\n",
	"machine_switch_extruder_time": "0",
	"machine_unload_filament_time": "0",
	"max_layer_height": [
		"0.32"
	],
	"min_layer_height": [
		"0.08"
	],
	"nozzle_diameter": [
		"0.4"
	],
	"nozzle_type": [
		"stainless_steel"
	],
	"printable_height": "250",
	"printer_settings_id": "",
	"printer_structure": "corexy",
	"printer_variant": "0.4",
	"retract_before_wipe": [
		"0%"
	],
	"retract_length_toolchange": [
		"2"
	],
	"retract_restart_extra_toolchange": [
		"0"
	],
	"retract_restart_extra": [
		"0"
	],
	"retract_when_changing_layer": [
		"1"
	],
	"retraction_length": [
		"0.8"
	],
	"retraction_minimum_travel": [
		"1"
	],
	"retraction_speed": [
		"30"
	],
	"scan_first_layer": "0",
	"silent_mode": "0",
	"single_extruder_multi_material": "1",
	"wipe_tower_type": "type1",
	"support_air_filtration": [
		"1"
	],
	"support_box_temp_control": "0",
	"support_chamber_temp_control": "1",
	"thumbnail_size": [
		"380x380",
		"210x210",
		"110x110"
	],
	"wipe": [
		"1"
	],
	"z_hop_types": [
		"Auto Lift"
	],
	"z_hop": [
		"0.4"
	]
}