mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-11 01:41:03 +00:00
9a7e2681d4
The Xplorer ships in four configurations that differ in how many toolheads they carry and how those heads are arranged: Single, IDEX with two heads on one gantry, Dual Gantry with one head on each of two, and IQEX with two on each of two. Each is offered at 0.4, 0.6 and 0.8 mm, giving four machine models, twelve machines over a shared base, and a five-tier process ladder per nozzle. The dual-gantry machines park the second gantry's tools over the plate, so the area both gantries can reach is 57.5 mm shallower than the plate itself. Those two declare 400 x 342.5 where Single and IDEX declare 400 x 400. That depth is what the parallel print modes divide into equal zones, so it has to be the reachable area rather than the physical one. The bed textures are drawn to match. Texture coordinates are normalised per axis, so a canvas whose aspect differs from printable_area is stretched and anything drawn outside the plate is pulled onto it; each viewBox equals its own model's area. They mark the real reach limits and nothing else, because the print zones are computed and drawn per plate at run time and a static copy of them only disagrees with the live one. Motion limits are the firmware's: 5000 acceleration, 300 mm/s, 100 on Z, 120 on the extruder, and a square corner velocity of 5 rather than a jerk, which Klipper does not have. Every per-extruder and per-variant value is written at full width, because padding a short array repeats its first value rather than its last pair and would otherwise hand every extruder past the first a normal-mode figure in its silent slot. The processes are based on a profile tuned on the hardware. Line widths are expressed as percentages of the nozzle so one statement serves all three sizes, and the ladder varies only what belongs to layer height. Extruder variants are declared rather than left to a default that would have capped volumetric flow at a figure describing a plain V6. Verified by slicing all fifteen tiers on all four models: every one completes, emitted accelerations and widths match what the profiles resolve to, no coordinate leaves the printable area, and the two pre-existing Troodon models in the same bundle are unaffected. The bed graphics, the print zones and the volumetric cap resolve through paths the command line does not exercise and want confirming in the application. Values tuned against hardware the author does not have - the 0.8 ladder in particular - are a starting point rather than a result. Co-Authored-By: Dan_3dp <corexy.diy@gmail.com> Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>