mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-10-10 17:21:10 +00:00
Add Vivedino Xplorer printer profiles
The Xplorer ships in four configurations that differ in how many toolheads they carry and how those heads are arranged: Single, IDEX with two heads on one gantry, Dual Gantry with one head on each of two, and IQEX with two on each of two. Each is offered at 0.4, 0.6 and 0.8 mm, giving four machine models, twelve machines over a shared base, and a five-tier process ladder per nozzle. The dual-gantry machines park the second gantry's tools over the plate, so the area both gantries can reach is 57.5 mm shallower than the plate itself. Those two declare 400 x 342.5 where Single and IDEX declare 400 x 400. That depth is what the parallel print modes divide into equal zones, so it has to be the reachable area rather than the physical one. The bed textures are drawn to match. Texture coordinates are normalised per axis, so a canvas whose aspect differs from printable_area is stretched and anything drawn outside the plate is pulled onto it; each viewBox equals its own model's area. They mark the real reach limits and nothing else, because the print zones are computed and drawn per plate at run time and a static copy of them only disagrees with the live one. Motion limits are the firmware's: 5000 acceleration, 300 mm/s, 100 on Z, 120 on the extruder, and a square corner velocity of 5 rather than a jerk, which Klipper does not have. Every per-extruder and per-variant value is written at full width, because padding a short array repeats its first value rather than its last pair and would otherwise hand every extruder past the first a normal-mode figure in its silent slot. The processes are based on a profile tuned on the hardware. Line widths are expressed as percentages of the nozzle so one statement serves all three sizes, and the ladder varies only what belongs to layer height. Extruder variants are declared rather than left to a default that would have capped volumetric flow at a figure describing a plain V6. Verified by slicing all fifteen tiers on all four models: every one completes, emitted accelerations and widths match what the profiles resolve to, no coordinate leaves the printable area, and the two pre-existing Troodon models in the same bundle are unaffected. The bed graphics, the print zones and the volumetric cap resolve through paths the command line does not exercise and want confirming in the application. Values tuned against hardware the author does not have - the 0.8 ladder in particular - are a starting point rather than a result. Co-Authored-By: Dan_3dp <corexy.diy@gmail.com> Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
This commit is contained in:
Clifford Garwood
co-authored by
Dan_3dp
Claude Opus 5
Dan_3dp
Claude Opus 5
parent
bd8b7ced6a
commit
9a7e2681d4
@@ -1,6 +1,6 @@
|
||||
{
|
||||
"name": "Vivedino",
|
||||
"version": "02.04.00.02",
|
||||
"version": "02.04.00.11",
|
||||
"force_update": "0",
|
||||
"description": "Vivedino configurations",
|
||||
"machine_model_list": [
|
||||
@@ -11,6 +11,22 @@
|
||||
{
|
||||
"name": "Troodon 2.0 - RRF",
|
||||
"sub_path": "machine/Troodon2RRF.json"
|
||||
},
|
||||
{
|
||||
"name": "Xplorer Dual Gantry",
|
||||
"sub_path": "machine/XplorerDualGantry.json"
|
||||
},
|
||||
{
|
||||
"name": "Xplorer IDEX",
|
||||
"sub_path": "machine/XplorerIDEX.json"
|
||||
},
|
||||
{
|
||||
"name": "Xplorer IQEX",
|
||||
"sub_path": "machine/XplorerIQEX.json"
|
||||
},
|
||||
{
|
||||
"name": "Xplorer Single",
|
||||
"sub_path": "machine/XplorerSingle.json"
|
||||
}
|
||||
],
|
||||
"process_list": [
|
||||
@@ -45,6 +61,78 @@
|
||||
{
|
||||
"name": "0.28mm Extra Draft @Troodon2",
|
||||
"sub_path": "process/0.28mm Extra Draft @Troodon2.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_xplorer_common",
|
||||
"sub_path": "process/fdm_process_xplorer_common.json"
|
||||
},
|
||||
{
|
||||
"name": "0.12mm Fine @Xplorer 0.4",
|
||||
"sub_path": "process/0.12mm Fine @Xplorer 0.4.json"
|
||||
},
|
||||
{
|
||||
"name": "0.16mm Optimal @Xplorer 0.4",
|
||||
"sub_path": "process/0.16mm Optimal @Xplorer 0.4.json"
|
||||
},
|
||||
{
|
||||
"name": "0.20mm Standard @Xplorer 0.4",
|
||||
"sub_path": "process/0.20mm Standard @Xplorer 0.4.json"
|
||||
},
|
||||
{
|
||||
"name": "0.28mm Draft @Xplorer 0.4",
|
||||
"sub_path": "process/0.28mm Draft @Xplorer 0.4.json"
|
||||
},
|
||||
{
|
||||
"name": "0.32mm Extra Draft @Xplorer 0.4",
|
||||
"sub_path": "process/0.32mm Extra Draft @Xplorer 0.4.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_xplorer_common_0_6",
|
||||
"sub_path": "process/fdm_process_xplorer_common_0_6.json"
|
||||
},
|
||||
{
|
||||
"name": "fdm_process_xplorer_common_0_8",
|
||||
"sub_path": "process/fdm_process_xplorer_common_0_8.json"
|
||||
},
|
||||
{
|
||||
"name": "0.18mm Fine @Xplorer 0.6",
|
||||
"sub_path": "process/0.18mm Fine @Xplorer 0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "0.24mm Optimal @Xplorer 0.6",
|
||||
"sub_path": "process/0.24mm Optimal @Xplorer 0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "0.30mm Standard @Xplorer 0.6",
|
||||
"sub_path": "process/0.30mm Standard @Xplorer 0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "0.36mm Draft @Xplorer 0.6",
|
||||
"sub_path": "process/0.36mm Draft @Xplorer 0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "0.42mm Extra Draft @Xplorer 0.6",
|
||||
"sub_path": "process/0.42mm Extra Draft @Xplorer 0.6.json"
|
||||
},
|
||||
{
|
||||
"name": "0.24mm Fine @Xplorer 0.8",
|
||||
"sub_path": "process/0.24mm Fine @Xplorer 0.8.json"
|
||||
},
|
||||
{
|
||||
"name": "0.32mm Optimal @Xplorer 0.8",
|
||||
"sub_path": "process/0.32mm Optimal @Xplorer 0.8.json"
|
||||
},
|
||||
{
|
||||
"name": "0.40mm Standard @Xplorer 0.8",
|
||||
"sub_path": "process/0.40mm Standard @Xplorer 0.8.json"
|
||||
},
|
||||
{
|
||||
"name": "0.48mm Draft @Xplorer 0.8",
|
||||
"sub_path": "process/0.48mm Draft @Xplorer 0.8.json"
|
||||
},
|
||||
{
|
||||
"name": "0.56mm Extra Draft @Xplorer 0.8",
|
||||
"sub_path": "process/0.56mm Extra Draft @Xplorer 0.8.json"
|
||||
}
|
||||
],
|
||||
"filament_list": [],
|
||||
@@ -65,9 +153,61 @@
|
||||
"name": "Troodon 2.0 Klipper 0.4 nozzle",
|
||||
"sub_path": "machine/Troodon 2.0 Klipper 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Xplorer common",
|
||||
"sub_path": "machine/Xplorer common.json"
|
||||
},
|
||||
{
|
||||
"name": "Troodon 2.0 RRF 0.4 nozzle",
|
||||
"sub_path": "machine/Troodon 2.0 RRF 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Xplorer Dual Gantry 0.4 nozzle",
|
||||
"sub_path": "machine/Xplorer Dual Gantry 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Xplorer Dual Gantry 0.6 nozzle",
|
||||
"sub_path": "machine/Xplorer Dual Gantry 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Xplorer Dual Gantry 0.8 nozzle",
|
||||
"sub_path": "machine/Xplorer Dual Gantry 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Xplorer IDEX 0.4 nozzle",
|
||||
"sub_path": "machine/Xplorer IDEX 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Xplorer IDEX 0.6 nozzle",
|
||||
"sub_path": "machine/Xplorer IDEX 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Xplorer IDEX 0.8 nozzle",
|
||||
"sub_path": "machine/Xplorer IDEX 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Xplorer IQEX 0.4 nozzle",
|
||||
"sub_path": "machine/Xplorer IQEX 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Xplorer IQEX 0.6 nozzle",
|
||||
"sub_path": "machine/Xplorer IQEX 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Xplorer IQEX 0.8 nozzle",
|
||||
"sub_path": "machine/Xplorer IQEX 0.8 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Xplorer Single 0.4 nozzle",
|
||||
"sub_path": "machine/Xplorer Single 0.4 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Xplorer Single 0.6 nozzle",
|
||||
"sub_path": "machine/Xplorer Single 0.6 nozzle.json"
|
||||
},
|
||||
{
|
||||
"name": "Xplorer Single 0.8 nozzle",
|
||||
"sub_path": "machine/Xplorer Single 0.8 nozzle.json"
|
||||
}
|
||||
]
|
||||
}
|
||||
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 38 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 38 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 38 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 38 KiB |
@@ -0,0 +1,74 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<!-- Vivedino Xplorer Dual Gantry build plate. Dashed red outlines mark real reach
|
||||
limits; the viewBox matches printable_area so the texture is not stretched.
|
||||
Print zones are drawn by the slicer per plate, not by this texture. -->
|
||||
<svg
|
||||
width="400mm"
|
||||
height="342.5mm"
|
||||
viewBox="0 0 400 342.5"
|
||||
version="1.1"
|
||||
id="svg1"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:svg="http://www.w3.org/2000/svg">
|
||||
<defs
|
||||
id="defs1" />
|
||||
<g
|
||||
id="layer1">
|
||||
<rect
|
||||
style="fill:none;stroke:#ff0e0e;stroke-width:1;stroke-dasharray:1, 2;stroke-dashoffset:0;stroke-opacity:1"
|
||||
id="bound-rear"
|
||||
width="400"
|
||||
height="26"
|
||||
x="0"
|
||||
y="0" />
|
||||
<rect
|
||||
style="fill:none;stroke:#ff0e0e;stroke-width:1;stroke-dasharray:1, 2;stroke-dashoffset:0;stroke-opacity:1"
|
||||
id="bound-front"
|
||||
width="400"
|
||||
height="77.5"
|
||||
x="0"
|
||||
y="265" />
|
||||
<g
|
||||
id="text3-6"
|
||||
style="opacity:1">
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;fill:#ff0000;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="M 22.60772,9.2135632 H 19.221048 V 5.4247238 h -3.831173 v 3.7888394 h -2.582337 v 0.1693336 l 1.058335,2.7516712 h 1.524002 v 8.699514 h 3.831173 v -8.699514 h 3.386672 z m 1.227659,1.1006688 v 6.096009 c 0,2.878672 1.375835,4.423841 4.762507,4.423841 h 8.805348 c 3.407838,0 4.762507,-1.545169 4.762507,-4.423841 v -6.096009 c 0,-3.0903387 -1.354669,-4.8895082 -4.762507,-4.8895082 h -8.805348 c -3.386672,0 -4.762507,1.7991695 -4.762507,4.8895082 z m 4.191006,0.656167 c 0,-1.2700017 0.592668,-1.820336 1.566336,-1.820336 h 6.582844 c 1.227669,0 1.799169,0.6138344 1.799169,1.98967 v 3.915839 c 0,1.333503 -0.5715,1.905003 -1.799169,1.905003 h -6.582844 c -1.227668,0 -1.566336,-0.719667 -1.566336,-2.159003 z"
|
||||
id="path25" />
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 14.890625,4.9238281 v 3.7890625 h -2.583984 v 0.7636719 l 1.216797,3.1582035 h 1.367187 v 8.699218 h 4.830078 v -8.699218 h 3.386719 V 8.7128906 H 19.720703 V 4.9238281 Z m 13.707031,0 c -1.781877,0 -3.138417,0.4891086 -4.019531,1.4492188 -0.881114,0.9601101 -1.242188,2.322036 -1.242188,3.9414061 v 6.095703 c 0,1.518993 0.370925,2.78417 1.261719,3.650391 0.890794,0.86622 2.230623,1.273437 4,1.273437 h 8.804688 c 1.779488,0 3.121173,-0.408321 4.009765,-1.27539 0.888593,-0.86707 1.253907,-2.13067 1.253907,-3.648438 v -6.095703 c 0,-1.6182286 -0.355554,-2.9804801 -1.234375,-3.9414061 -0.878822,-0.960926 -2.237387,-1.4492188 -4.029297,-1.4492188 z m -12.707031,1 h 2.830078 v 3.7890625 h 3.386719 v 1.9218754 h -3.386719 v 8.699218 H 15.890625 V 11.634766 H 14.208984 L 13.46875,9.7128906 h 2.421875 z m 12.707031,0 h 8.804688 c 1.615927,0 2.640543,0.4137566 3.291015,1.125 0.650473,0.7112434 0.972657,1.793515 0.972657,3.2656249 v 6.095703 c 0,1.360905 -0.312424,2.308411 -0.953125,2.933594 -0.640702,0.625183 -1.682198,0.990234 -3.310547,0.990234 h -8.804688 c -1.617294,0 -2.658943,-0.364202 -3.302734,-0.990234 -0.643792,-0.626032 -0.958984,-1.573915 -0.958985,-2.933594 v -6.095703 c 0,-1.4709684 0.325044,-2.5535656 0.978516,-3.2656249 0.653472,-0.7120593 1.678409,-1.125 3.283203,-1.125 z m 0.994141,2.7265625 c -0.581037,0 -1.137457,0.1802682 -1.517578,0.5976563 -0.380122,0.4173881 -0.546875,1.0098771 -0.546875,1.7226561 v 3.830078 c 0,0.758884 0.06928,1.390241 0.404297,1.896485 0.335014,0.506243 0.948621,0.763671 1.660156,0.763671 h 6.583984 c 0.691421,0 1.302744,-0.170803 1.720703,-0.607421 0.417959,-0.436618 0.578125,-1.060649 0.578125,-1.798828 v -3.914063 c 0,-0.757148 -0.157083,-1.3938421 -0.570312,-1.8476562 C 37.491068,8.8391546 36.872949,8.6503906 36.175781,8.6503906 Z m 0,1 h 6.583984 c 0.530501,0 0.810796,0.1173912 0.990235,0.3144532 0.179438,0.1970622 0.308593,0.5570942 0.308593,1.1757812 v 3.914063 c 0,0.595323 -0.126073,0.924914 -0.300781,1.107421 -0.174708,0.182508 -0.461798,0.298828 -0.998047,0.298828 h -6.583984 c -0.516133,0 -0.684935,-0.102981 -0.826172,-0.316406 -0.141237,-0.213424 -0.238281,-0.663298 -0.238281,-1.34375 v -3.830078 c 0,-0.557223 0.12748,-0.875502 0.287109,-1.0507811 0.15963,-0.1752795 0.384713,-0.2695313 0.777344,-0.2695313 z"
|
||||
id="path26" />
|
||||
</g>
|
||||
<g
|
||||
transform="translate(-356.014,288.234)">
|
||||
<g
|
||||
id="text3-8"
|
||||
style="opacity:1">
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;fill:#ff0000;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 378.62465,9.2135632 h -3.38667 V 5.4247238 h -3.83117 v 3.7888394 h -2.58234 v 0.1693336 l 1.05834,2.7516712 h 1.524 v 8.699514 h 3.83117 v -8.699514 h 3.38667 z m 3.70417,-0.0635 c 0.74083,0 0.97367,0.2751672 0.97367,1.0795018 v 10.604517 h 4.191 V 9.2770633 c 0,-2.7940045 -0.762,-3.8523395 -3.70417,-3.8523395 h -4.65667 v 0.1693336 l 1.37583,3.5560056 z"
|
||||
id="path23" />
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 370.90625,4.9238281 v 3.7890625 h -2.58203 v 0.7636719 l 1.21484,3.1582035 h 1.36719 v 8.699218 h 4.83203 V 12.634766 H 379.125 V 8.7128906 h -3.38672 V 4.9238281 Z m 7.72656,0 V 5.6875 l 1.53321,3.9628906 h 2.1621 c 0.30851,0 0.37476,0.050297 0.39258,0.070312 0.0178,0.020016 0.082,0.1558452 0.082,0.5097654 v 11.103515 h 5.19141 V 9.2773438 c 0,-1.4424568 -0.18358,-2.5460127 -0.87891,-3.3105469 -0.69533,-0.7645343 -1.79513,-1.0429688 -3.32617,-1.0429688 z m -6.72656,1 h 2.83203 v 3.7890625 h 3.38672 v 1.9218754 h -3.38672 v 8.699218 h -2.83203 v -8.699218 h -1.67969 l -0.74023,-1.9218754 h 2.41992 z m 7.89062,0 h 3.99219 c 1.41114,0 2.16473,0.2517094 2.58594,0.7148438 0.42121,0.4631344 0.61914,1.2871241 0.61914,2.6386719 V 20.333984 h -3.19141 V 10.230469 c 0,-0.4504146 -0.0521,-0.85713 -0.33593,-1.1757815 -0.2838,-0.3186515 -0.70635,-0.4042969 -1.13868,-0.4042969 h -1.47656 z"
|
||||
id="path24" />
|
||||
</g>
|
||||
</g>
|
||||
<g
|
||||
transform="translate(0.020506,27.6309)">
|
||||
<g
|
||||
id="text6-8"
|
||||
style="opacity:1">
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;fill:#ff0000;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 198.87817,149.53483 h 2.20134 v -4.826 h 4.80484 v -2.18017 h -4.80484 v -4.82601 h -2.20134 v 4.82601 h -4.80484 v 2.18017 h 4.80484 z"
|
||||
id="path17" />
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 198.37891,137.20312 v 4.82618 h -4.80469 v 3.17968 h 4.80469 v 4.82618 h 3.20117 v -4.82618 h 4.80469 v -3.17968 h -4.80469 v -4.82618 z m 1,1 h 1.20117 v 4.82618 h 4.80469 v 1.17968 h -4.80469 v 4.82618 h -1.20117 v -4.82618 h -4.80469 v -1.17968 h 4.80469 z"
|
||||
id="path18" />
|
||||
</g>
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 7.9 KiB |
@@ -0,0 +1,77 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<!-- Vivedino Xplorer IDEX build plate. Dashed red outlines mark real reach
|
||||
limits; the viewBox matches printable_area so the texture is not stretched.
|
||||
Print zones are drawn by the slicer per plate, not by this texture. -->
|
||||
<svg
|
||||
width="400mm"
|
||||
height="400mm"
|
||||
viewBox="0 0 400 400"
|
||||
version="1.1"
|
||||
id="svg1"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:svg="http://www.w3.org/2000/svg">
|
||||
<defs
|
||||
id="defs1" />
|
||||
<g
|
||||
id="layer1">
|
||||
<rect
|
||||
style="fill:none;stroke:#ff0e0e;stroke-width:1;stroke-dasharray:1, 2;stroke-dashoffset:0;stroke-opacity:1"
|
||||
id="bound-left"
|
||||
width="66"
|
||||
height="400"
|
||||
x="0"
|
||||
y="0" />
|
||||
<rect
|
||||
style="fill:none;stroke:#ff0e0e;stroke-width:1;stroke-dasharray:1, 2;stroke-dashoffset:0;stroke-opacity:1"
|
||||
id="bound-right"
|
||||
width="68"
|
||||
height="400"
|
||||
x="332"
|
||||
y="0" />
|
||||
<g
|
||||
transform="translate(0,345.734)">
|
||||
<g
|
||||
id="text3-6"
|
||||
style="opacity:1">
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;fill:#ff0000;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="M 22.60772,9.2135632 H 19.221048 V 5.4247238 h -3.831173 v 3.7888394 h -2.582337 v 0.1693336 l 1.058335,2.7516712 h 1.524002 v 8.699514 h 3.831173 v -8.699514 h 3.386672 z m 1.227659,1.1006688 v 6.096009 c 0,2.878672 1.375835,4.423841 4.762507,4.423841 h 8.805348 c 3.407838,0 4.762507,-1.545169 4.762507,-4.423841 v -6.096009 c 0,-3.0903387 -1.354669,-4.8895082 -4.762507,-4.8895082 h -8.805348 c -3.386672,0 -4.762507,1.7991695 -4.762507,4.8895082 z m 4.191006,0.656167 c 0,-1.2700017 0.592668,-1.820336 1.566336,-1.820336 h 6.582844 c 1.227669,0 1.799169,0.6138344 1.799169,1.98967 v 3.915839 c 0,1.333503 -0.5715,1.905003 -1.799169,1.905003 h -6.582844 c -1.227668,0 -1.566336,-0.719667 -1.566336,-2.159003 z"
|
||||
id="path25" />
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 14.890625,4.9238281 v 3.7890625 h -2.583984 v 0.7636719 l 1.216797,3.1582035 h 1.367187 v 8.699218 h 4.830078 v -8.699218 h 3.386719 V 8.7128906 H 19.720703 V 4.9238281 Z m 13.707031,0 c -1.781877,0 -3.138417,0.4891086 -4.019531,1.4492188 -0.881114,0.9601101 -1.242188,2.322036 -1.242188,3.9414061 v 6.095703 c 0,1.518993 0.370925,2.78417 1.261719,3.650391 0.890794,0.86622 2.230623,1.273437 4,1.273437 h 8.804688 c 1.779488,0 3.121173,-0.408321 4.009765,-1.27539 0.888593,-0.86707 1.253907,-2.13067 1.253907,-3.648438 v -6.095703 c 0,-1.6182286 -0.355554,-2.9804801 -1.234375,-3.9414061 -0.878822,-0.960926 -2.237387,-1.4492188 -4.029297,-1.4492188 z m -12.707031,1 h 2.830078 v 3.7890625 h 3.386719 v 1.9218754 h -3.386719 v 8.699218 H 15.890625 V 11.634766 H 14.208984 L 13.46875,9.7128906 h 2.421875 z m 12.707031,0 h 8.804688 c 1.615927,0 2.640543,0.4137566 3.291015,1.125 0.650473,0.7112434 0.972657,1.793515 0.972657,3.2656249 v 6.095703 c 0,1.360905 -0.312424,2.308411 -0.953125,2.933594 -0.640702,0.625183 -1.682198,0.990234 -3.310547,0.990234 h -8.804688 c -1.617294,0 -2.658943,-0.364202 -3.302734,-0.990234 -0.643792,-0.626032 -0.958984,-1.573915 -0.958985,-2.933594 v -6.095703 c 0,-1.4709684 0.325044,-2.5535656 0.978516,-3.2656249 0.653472,-0.7120593 1.678409,-1.125 3.283203,-1.125 z m 0.994141,2.7265625 c -0.581037,0 -1.137457,0.1802682 -1.517578,0.5976563 -0.380122,0.4173881 -0.546875,1.0098771 -0.546875,1.7226561 v 3.830078 c 0,0.758884 0.06928,1.390241 0.404297,1.896485 0.335014,0.506243 0.948621,0.763671 1.660156,0.763671 h 6.583984 c 0.691421,0 1.302744,-0.170803 1.720703,-0.607421 0.417959,-0.436618 0.578125,-1.060649 0.578125,-1.798828 v -3.914063 c 0,-0.757148 -0.157083,-1.3938421 -0.570312,-1.8476562 C 37.491068,8.8391546 36.872949,8.6503906 36.175781,8.6503906 Z m 0,1 h 6.583984 c 0.530501,0 0.810796,0.1173912 0.990235,0.3144532 0.179438,0.1970622 0.308593,0.5570942 0.308593,1.1757812 v 3.914063 c 0,0.595323 -0.126073,0.924914 -0.300781,1.107421 -0.174708,0.182508 -0.461798,0.298828 -0.998047,0.298828 h -6.583984 c -0.516133,0 -0.684935,-0.102981 -0.826172,-0.316406 -0.141237,-0.213424 -0.238281,-0.663298 -0.238281,-1.34375 v -3.830078 c 0,-0.557223 0.12748,-0.875502 0.287109,-1.0507811 0.15963,-0.1752795 0.384713,-0.2695313 0.777344,-0.2695313 z"
|
||||
id="path26" />
|
||||
</g>
|
||||
</g>
|
||||
<g
|
||||
transform="translate(0,345.734)">
|
||||
<g
|
||||
id="text3-8"
|
||||
style="opacity:1">
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;fill:#ff0000;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 378.62465,9.2135632 h -3.38667 V 5.4247238 h -3.83117 v 3.7888394 h -2.58234 v 0.1693336 l 1.05834,2.7516712 h 1.524 v 8.699514 h 3.83117 v -8.699514 h 3.38667 z m 3.70417,-0.0635 c 0.74083,0 0.97367,0.2751672 0.97367,1.0795018 v 10.604517 h 4.191 V 9.2770633 c 0,-2.7940045 -0.762,-3.8523395 -3.70417,-3.8523395 h -4.65667 v 0.1693336 l 1.37583,3.5560056 z"
|
||||
id="path23" />
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 370.90625,4.9238281 v 3.7890625 h -2.58203 v 0.7636719 l 1.21484,3.1582035 h 1.36719 v 8.699218 h 4.83203 V 12.634766 H 379.125 V 8.7128906 h -3.38672 V 4.9238281 Z m 7.72656,0 V 5.6875 l 1.53321,3.9628906 h 2.1621 c 0.30851,0 0.37476,0.050297 0.39258,0.070312 0.0178,0.020016 0.082,0.1558452 0.082,0.5097654 v 11.103515 h 5.19141 V 9.2773438 c 0,-1.4424568 -0.18358,-2.5460127 -0.87891,-3.3105469 -0.69533,-0.7645343 -1.79513,-1.0429688 -3.32617,-1.0429688 z m -6.72656,1 h 2.83203 v 3.7890625 h 3.38672 v 1.9218754 h -3.38672 v 8.699218 h -2.83203 v -8.699218 h -1.67969 l -0.74023,-1.9218754 h 2.41992 z m 7.89062,0 h 3.99219 c 1.41114,0 2.16473,0.2517094 2.58594,0.7148438 0.42121,0.4631344 0.61914,1.2871241 0.61914,2.6386719 V 20.333984 h -3.19141 V 10.230469 c 0,-0.4504146 -0.0521,-0.85713 -0.33593,-1.1757815 -0.2838,-0.3186515 -0.70635,-0.4042969 -1.13868,-0.4042969 h -1.47656 z"
|
||||
id="path24" />
|
||||
</g>
|
||||
</g>
|
||||
<g
|
||||
transform="translate(0.020506,56.3809)">
|
||||
<g
|
||||
id="text6-8"
|
||||
style="opacity:1">
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;fill:#ff0000;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 198.87817,149.53483 h 2.20134 v -4.826 h 4.80484 v -2.18017 h -4.80484 v -4.82601 h -2.20134 v 4.82601 h -4.80484 v 2.18017 h 4.80484 z"
|
||||
id="path17" />
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 198.37891,137.20312 v 4.82618 h -4.80469 v 3.17968 h 4.80469 v 4.82618 h 3.20117 v -4.82618 h 4.80469 v -3.17968 h -4.80469 v -4.82618 z m 1,1 h 1.20117 v 4.82618 h 4.80469 v 1.17968 h -4.80469 v 4.82618 h -1.20117 v -4.82618 h -4.80469 v -1.17968 h 4.80469 z"
|
||||
id="path18" />
|
||||
</g>
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 8.0 KiB |
@@ -0,0 +1,154 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<!-- Vivedino Xplorer IQEX build plate. Dashed red outlines mark real reach
|
||||
limits; the viewBox matches printable_area so the texture is not stretched.
|
||||
Print zones are drawn by the slicer per plate, not by this texture. -->
|
||||
<svg
|
||||
width="400mm"
|
||||
height="342.5mm"
|
||||
viewBox="0 0 400 342.5"
|
||||
version="1.1"
|
||||
id="svg1"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:svg="http://www.w3.org/2000/svg">
|
||||
<defs
|
||||
id="defs1" />
|
||||
<g
|
||||
id="layer1">
|
||||
<rect
|
||||
style="fill:none;stroke:#ff0e0e;stroke-width:1;stroke-dasharray:1, 2;stroke-dashoffset:0;stroke-opacity:1"
|
||||
id="bound-left"
|
||||
width="66"
|
||||
height="342.5"
|
||||
x="0"
|
||||
y="0" />
|
||||
<rect
|
||||
style="fill:none;stroke:#ff0e0e;stroke-width:1;stroke-dasharray:1, 2;stroke-dashoffset:0;stroke-opacity:1"
|
||||
id="bound-right"
|
||||
width="68"
|
||||
height="342.5"
|
||||
x="332"
|
||||
y="0" />
|
||||
<rect
|
||||
style="fill:none;stroke:#ff0e0e;stroke-width:1;stroke-dasharray:1, 2;stroke-dashoffset:0;stroke-opacity:1"
|
||||
id="bound-rear"
|
||||
width="400"
|
||||
height="26"
|
||||
x="0"
|
||||
y="0" />
|
||||
<rect
|
||||
style="fill:none;stroke:#ff0e0e;stroke-width:1;stroke-dasharray:1, 2;stroke-dashoffset:0;stroke-opacity:1"
|
||||
id="bound-front"
|
||||
width="400"
|
||||
height="77.5"
|
||||
x="0"
|
||||
y="265" />
|
||||
<g
|
||||
id="text3-6"
|
||||
style="opacity:1">
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;fill:#ff0000;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="M 22.60772,9.2135632 H 19.221048 V 5.4247238 h -3.831173 v 3.7888394 h -2.582337 v 0.1693336 l 1.058335,2.7516712 h 1.524002 v 8.699514 h 3.831173 v -8.699514 h 3.386672 z m 1.227659,1.1006688 v 6.096009 c 0,2.878672 1.375835,4.423841 4.762507,4.423841 h 8.805348 c 3.407838,0 4.762507,-1.545169 4.762507,-4.423841 v -6.096009 c 0,-3.0903387 -1.354669,-4.8895082 -4.762507,-4.8895082 h -8.805348 c -3.386672,0 -4.762507,1.7991695 -4.762507,4.8895082 z m 4.191006,0.656167 c 0,-1.2700017 0.592668,-1.820336 1.566336,-1.820336 h 6.582844 c 1.227669,0 1.799169,0.6138344 1.799169,1.98967 v 3.915839 c 0,1.333503 -0.5715,1.905003 -1.799169,1.905003 h -6.582844 c -1.227668,0 -1.566336,-0.719667 -1.566336,-2.159003 z"
|
||||
id="path25" />
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 14.890625,4.9238281 v 3.7890625 h -2.583984 v 0.7636719 l 1.216797,3.1582035 h 1.367187 v 8.699218 h 4.830078 v -8.699218 h 3.386719 V 8.7128906 H 19.720703 V 4.9238281 Z m 13.707031,0 c -1.781877,0 -3.138417,0.4891086 -4.019531,1.4492188 -0.881114,0.9601101 -1.242188,2.322036 -1.242188,3.9414061 v 6.095703 c 0,1.518993 0.370925,2.78417 1.261719,3.650391 0.890794,0.86622 2.230623,1.273437 4,1.273437 h 8.804688 c 1.779488,0 3.121173,-0.408321 4.009765,-1.27539 0.888593,-0.86707 1.253907,-2.13067 1.253907,-3.648438 v -6.095703 c 0,-1.6182286 -0.355554,-2.9804801 -1.234375,-3.9414061 -0.878822,-0.960926 -2.237387,-1.4492188 -4.029297,-1.4492188 z m -12.707031,1 h 2.830078 v 3.7890625 h 3.386719 v 1.9218754 h -3.386719 v 8.699218 H 15.890625 V 11.634766 H 14.208984 L 13.46875,9.7128906 h 2.421875 z m 12.707031,0 h 8.804688 c 1.615927,0 2.640543,0.4137566 3.291015,1.125 0.650473,0.7112434 0.972657,1.793515 0.972657,3.2656249 v 6.095703 c 0,1.360905 -0.312424,2.308411 -0.953125,2.933594 -0.640702,0.625183 -1.682198,0.990234 -3.310547,0.990234 h -8.804688 c -1.617294,0 -2.658943,-0.364202 -3.302734,-0.990234 -0.643792,-0.626032 -0.958984,-1.573915 -0.958985,-2.933594 v -6.095703 c 0,-1.4709684 0.325044,-2.5535656 0.978516,-3.2656249 0.653472,-0.7120593 1.678409,-1.125 3.283203,-1.125 z m 0.994141,2.7265625 c -0.581037,0 -1.137457,0.1802682 -1.517578,0.5976563 -0.380122,0.4173881 -0.546875,1.0098771 -0.546875,1.7226561 v 3.830078 c 0,0.758884 0.06928,1.390241 0.404297,1.896485 0.335014,0.506243 0.948621,0.763671 1.660156,0.763671 h 6.583984 c 0.691421,0 1.302744,-0.170803 1.720703,-0.607421 0.417959,-0.436618 0.578125,-1.060649 0.578125,-1.798828 v -3.914063 c 0,-0.757148 -0.157083,-1.3938421 -0.570312,-1.8476562 C 37.491068,8.8391546 36.872949,8.6503906 36.175781,8.6503906 Z m 0,1 h 6.583984 c 0.530501,0 0.810796,0.1173912 0.990235,0.3144532 0.179438,0.1970622 0.308593,0.5570942 0.308593,1.1757812 v 3.914063 c 0,0.595323 -0.126073,0.924914 -0.300781,1.107421 -0.174708,0.182508 -0.461798,0.298828 -0.998047,0.298828 h -6.583984 c -0.516133,0 -0.684935,-0.102981 -0.826172,-0.316406 -0.141237,-0.213424 -0.238281,-0.663298 -0.238281,-1.34375 v -3.830078 c 0,-0.557223 0.12748,-0.875502 0.287109,-1.0507811 0.15963,-0.1752795 0.384713,-0.2695313 0.777344,-0.2695313 z"
|
||||
id="path26" />
|
||||
</g>
|
||||
<g
|
||||
id="text3-8"
|
||||
style="opacity:1">
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;fill:#ff0000;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 378.62465,9.2135632 h -3.38667 V 5.4247238 h -3.83117 v 3.7888394 h -2.58234 v 0.1693336 l 1.05834,2.7516712 h 1.524 v 8.699514 h 3.83117 v -8.699514 h 3.38667 z m 3.70417,-0.0635 c 0.74083,0 0.97367,0.2751672 0.97367,1.0795018 v 10.604517 h 4.191 V 9.2770633 c 0,-2.7940045 -0.762,-3.8523395 -3.70417,-3.8523395 h -4.65667 v 0.1693336 l 1.37583,3.5560056 z"
|
||||
id="path23" />
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 370.90625,4.9238281 v 3.7890625 h -2.58203 v 0.7636719 l 1.21484,3.1582035 h 1.36719 v 8.699218 h 4.83203 V 12.634766 H 379.125 V 8.7128906 h -3.38672 V 4.9238281 Z m 7.72656,0 V 5.6875 l 1.53321,3.9628906 h 2.1621 c 0.30851,0 0.37476,0.050297 0.39258,0.070312 0.0178,0.020016 0.082,0.1558452 0.082,0.5097654 v 11.103515 h 5.19141 V 9.2773438 c 0,-1.4424568 -0.18358,-2.5460127 -0.87891,-3.3105469 -0.69533,-0.7645343 -1.79513,-1.0429688 -3.32617,-1.0429688 z m -6.72656,1 h 2.83203 v 3.7890625 h 3.38672 v 1.9218754 h -3.38672 v 8.699218 h -2.83203 v -8.699218 h -1.67969 l -0.74023,-1.9218754 h 2.41992 z m 7.89062,0 h 3.99219 c 1.41114,0 2.16473,0.2517094 2.58594,0.7148438 0.42121,0.4631344 0.61914,1.2871241 0.61914,2.6386719 V 20.333984 h -3.19141 V 10.230469 c 0,-0.4504146 -0.0521,-0.85713 -0.33593,-1.1757815 -0.2838,-0.3186515 -0.70635,-0.4042969 -1.13868,-0.4042969 h -1.47656 z"
|
||||
id="path24" />
|
||||
</g>
|
||||
<g
|
||||
id="text3"
|
||||
style="opacity:1">
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;fill:#ff0000;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 22.61014,297.44787 h -3.386672 v -3.78884 h -3.831173 v 3.78884 h -2.582337 v 0.16933 l 1.058335,2.75168 h 1.524002 v 8.69951 h 3.831173 v -8.69951 h 3.386672 z m 18.944187,7.81051 h -8.001013 c -1.227669,0 -2.286004,0.0212 -4.064006,0.127 v -0.14816 c 0.952501,-0.23284 1.735669,-0.46567 3.810006,-1.143 l 5.969009,-1.92617 c 1.98967,-0.63501 2.455337,-1.35467 2.455337,-3.47134 v -1.54517 c 0,-2.09551 -0.952501,-3.49251 -3.661839,-3.49251 H 23.753132 v 0.16934 l 1.312335,3.429 h 11.408852 c 0.698501,0 0.867834,0.27517 0.867834,0.78317 v 0.5715 c 0,0.55033 -0.211667,0.8255 -0.825501,1.03717 l -11.408851,3.89467 c -0.783168,0.27517 -1.016002,0.61384 -1.016002,1.56634 v 3.19617 c 0,0.55033 0.254,0.762 0.592668,0.762 h 16.86986 z"
|
||||
id="path29" />
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 14.892578,293.1582 v 3.78907 h -2.582031 v 0.76367 l 1.214844,3.1582 h 1.367187 v 8.69922 h 4.830078 v -8.69922 h 3.386719 v -3.92187 h -3.386719 v -3.78907 z m 8.361328,0 v 0.76172 l 1.466797,3.83789 h 11.753906 c 0.283594,0 0.342775,0.0558 0.337891,0.0508 -0.0049,-0.005 0.0293,0.034 0.0293,0.23243 v 0.57031 c 0,0.21106 -0.03003,0.28002 -0.07422,0.33594 -0.04419,0.0559 -0.153527,0.13867 -0.414062,0.22851 l -11.410157,3.89649 h -0.002 c -0.437489,0.15371 -0.814289,0.36283 -1.052734,0.72656 -0.238445,0.36373 -0.296875,0.79355 -0.296875,1.31054 v 3.19727 c 0,0.35209 0.0826,0.67409 0.292969,0.91602 0.210369,0.24192 0.525326,0.3457 0.798828,0.3457 h 17.371093 v -4.81055 h -8.501953 c -0.243624,0 -0.570664,0.0232 -0.808593,0.0254 0.305142,-0.0978 0.326312,-0.0879 0.708984,-0.21289 l 5.966797,-1.92578 c 1.036192,-0.3307 1.774785,-0.71448 2.232422,-1.37109 0.457636,-0.65661 0.572265,-1.48117 0.572265,-2.57617 v -1.54493 c 0,-1.12351 -0.260337,-2.14285 -0.953125,-2.87695 -0.692788,-0.7341 -1.768378,-1.11719 -3.208984,-1.11719 z m -7.361328,1 h 2.830078 v 3.78907 h 3.386719 v 1.92187 h -3.386719 v 8.69922 h -2.830078 v -8.69922 h -1.68164 l -0.738282,-1.92187 h 2.419922 z m 8.523438,0 H 38.0625 c 1.268732,0 2.021625,0.31641 2.482422,0.80469 0.460797,0.48828 0.679687,1.21746 0.679687,2.18945 v 1.54493 c 0,1.02166 -0.119963,1.61276 -0.392578,2.0039 -0.272614,0.39114 -0.761365,0.68593 -1.714844,0.99024 h -0.002 l -5.970703,1.92773 c -2.071176,0.6763 -2.834211,0.90322 -3.773437,1.13281 l -0.38086,0.0918 v 1.07227 l 0.529297,-0.0312 c 1.770212,-0.10534 2.811291,-0.12696 4.033203,-0.12696 h 7.501953 v 2.81055 H 24.683594 c -0.06517,0 -0.04362,-4.6e-4 -0.04492,-0.002 -0.0013,-0.002 -0.04687,-0.0615 -0.04687,-0.25977 v -3.19727 c 0,-0.4355 0.05905,-0.64919 0.132812,-0.76171 0.07376,-0.11253 0.20315,-0.21058 0.548828,-0.33204 l 11.40625,-3.89257 v -0.002 c 0.353299,-0.12183 0.657948,-0.28056 0.873047,-0.55273 0.215099,-0.27217 0.289063,-0.61776 0.289063,-0.95703 v -0.57031 c 0,-0.30956 -0.05028,-0.66208 -0.314453,-0.93165 -0.264176,-0.26956 -0.637827,-0.35156 -1.052735,-0.35156 h -11.06446 z"
|
||||
id="path30" />
|
||||
</g>
|
||||
<g
|
||||
id="text3-1"
|
||||
style="opacity:1">
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;fill:#ff0000;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 368.78211,297.97579 h -3.38667 v -3.78883 h -3.83117 v 3.78883 h -2.58234 v 0.16934 l 1.05833,2.75167 h 1.52401 v 8.69951 h 3.83117 v -8.69951 h 3.38667 z m 13.52551,-0.27516 c 0.61384,0 0.889,0.254 0.889,0.762 v 0.74083 c 0,0.5715 -0.254,0.91017 -0.91016,0.91017 h -10.11769 v 0.16934 l 0.99484,2.70933 h 9.05935 c 0.6985,0 1.03716,0.29634 1.03716,0.9525 v 0.76201 c 0,0.71966 -0.29633,1.05833 -1.16416,1.05833 h -11.74752 v 3.83117 h 13.03868 c 3.00568,0 4.10634,-1.50283 4.10634,-4.064 v -1.16417 c 0,-1.3335 -0.6985,-2.30717 -1.56633,-2.73051 0.635,-0.46566 1.22767,-1.22766 1.22767,-2.56117 v -1.29117 c 0,-2.159 -1.03717,-3.59833 -3.89468,-3.59833 h -13.50435 v 0.16933 l 1.35467,3.34434 z"
|
||||
id="path27" />
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 361.06445,293.6875 v 3.78906 h -2.58203 v 0.76172 l 1.21485,3.1582 h 1.36718 v 8.69922 h 4.83008 v -8.69922 h 3.38672 v -3.91992 h -3.38672 v -3.78906 z m 8.19141,0 v 0.76562 l 1.51758,3.74805 h 11.53515 c 0.23796,0 0.328,0.051 0.34571,0.0664 0.0177,0.0154 0.043,0.0316 0.043,0.19531 v 0.74023 c 0,0.21168 -0.0464,0.29622 -0.0762,0.32813 -0.0297,0.0319 -0.0919,0.082 -0.33398,0.082 h -10.61914 v 0.75781 l 1.14648,3.1211 h 9.40821 c 0.27854,0 0.40023,0.0587 0.44531,0.0996 0.0451,0.0409 0.0918,0.11145 0.0918,0.35351 v 0.76172 c 0,0.2912 -0.0525,0.39055 -0.10157,0.4375 -0.0491,0.047 -0.19362,0.12109 -0.5625,0.12109 h -12.24804 v 4.83008 h 13.53906 c 1.58617,0 2.77621,-0.40668 3.54492,-1.22851 0.76871,-0.82184 1.0625,-1.98178 1.0625,-3.33399 v -1.16601 c 0,-1.24687 -0.61226,-2.15723 -1.39258,-2.75782 0.56011,-0.56303 1.05274,-1.33541 1.05274,-2.5332 v -1.29101 c 0,-1.15957 -0.2836,-2.20926 -1.01758,-2.95899 -0.73398,-0.74972 -1.86425,-1.13867 -3.37695,-1.13867 z m -7.19141,1 h 2.83008 v 3.78906 h 3.38672 v 1.91992 h -3.38672 v 8.69922 h -2.83008 v -8.69922 h -1.68164 l -0.73828,-1.91992 h 2.41992 z m 8.36524,0 h 12.83008 c 1.3448,0 2.16312,0.3282 2.6621,0.83789 0.49899,0.50969 0.73243,1.26033 0.73243,2.25977 v 1.29101 c 0,1.18536 -0.47856,1.75863 -1.02344,2.1582 l -0.66797,0.49024 0.74414,0.36328 c 0.69133,0.33724 1.28711,1.1204 1.28711,2.2793 v 1.16601 c 0,1.20896 -0.25798,2.08052 -0.79102,2.65039 -0.53303,0.56988 -1.39689,0.91211 -2.8164,0.91211 h -12.53906 v -2.83008 h 11.24804 c 0.49896,0 0.93787,-0.0961 1.25391,-0.39843 0.31604,-0.3023 0.41016,-0.7317 0.41016,-1.16016 v -0.76172 c 0,-0.4141 -0.12105,-0.82246 -0.41993,-1.09375 -0.29887,-0.27129 -0.69723,-0.35937 -1.11718,-0.35937 h -8.71094 l -0.68945,-1.87891 h 9.46484 c 0.4141,0 0.80511,-0.12009 1.06641,-0.40039 0.26129,-0.2803 0.34375,-0.64994 0.34375,-1.00977 v -0.74023 c 0,-0.34427 -0.11339,-0.71067 -0.38672,-0.94922 -0.27333,-0.23854 -0.62607,-0.3125 -1.00196,-0.3125 h -10.86132 z"
|
||||
id="path28" />
|
||||
</g>
|
||||
<g
|
||||
id="text6-84"
|
||||
style="opacity:1">
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;fill:#ff0000;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 198.87817,19.323245 h 2.20134 v -4.826008 h 4.80484 v -2.18017 h -4.80484 V 7.4910596 h -2.20134 v 4.8260074 h -4.80484 v 2.18017 h 4.80484 z"
|
||||
id="path13" />
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 198.37891,6.9902344 v 4.8261716 h -4.80469 v 3.181641 h 4.80469 v 4.826172 h 3.20117 v -4.826172 h 4.80469 v -3.181641 h -4.80469 V 6.9902344 Z m 1,1 h 1.20117 v 4.8261716 h 4.80469 v 1.181641 h -4.80469 v 4.826172 h -1.20117 v -4.826172 h -4.80469 v -1.181641 h 4.80469 z"
|
||||
id="path14" />
|
||||
</g>
|
||||
<g
|
||||
id="text6"
|
||||
style="opacity:1">
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;fill:#ff0000;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 28.866225,149.41589 h 2.201337 v -4.82601 h 4.804841 v -2.18017 h -4.804841 v -4.826 h -2.201337 v 4.826 h -4.804841 v 2.18017 h 4.804841 z"
|
||||
id="path21" />
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 28.367187,137.08398 v 4.82618 h -4.80664 v 3.17968 h 4.80664 v 4.82618 h 3.201172 v -4.82618 h 4.804688 v -3.17968 h -4.804688 v -4.82618 z m 1,1 h 1.201172 v 4.82618 h 4.804688 v 1.17968 h -4.804688 v 4.82618 h -1.201172 v -4.82618 h -4.80664 v -1.17968 h 4.80664 z"
|
||||
id="path22" />
|
||||
</g>
|
||||
<g
|
||||
id="text6-8"
|
||||
style="opacity:1">
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;fill:#ff0000;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 198.87817,149.53483 h 2.20134 v -4.826 h 4.80484 v -2.18017 h -4.80484 v -4.82601 h -2.20134 v 4.82601 h -4.80484 v 2.18017 h 4.80484 z"
|
||||
id="path17" />
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 198.37891,137.20312 v 4.82618 h -4.80469 v 3.17968 h 4.80469 v 4.82618 h 3.20117 v -4.82618 h 4.80469 v -3.17968 h -4.80469 v -4.82618 z m 1,1 h 1.20117 v 4.82618 h 4.80469 v 1.17968 h -4.80469 v 4.82618 h -1.20117 v -4.82618 h -4.80469 v -1.17968 h 4.80469 z"
|
||||
id="path18" />
|
||||
</g>
|
||||
<g
|
||||
id="text6-3"
|
||||
style="opacity:1">
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;fill:#ff0000;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 368.87506,149.45341 h 2.20133 v -4.82601 h 4.80484 v -2.18017 h -4.80484 v -4.826 h -2.20133 v 4.826 h -4.80484 v 2.18017 h 4.80484 z"
|
||||
id="path19" />
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 368.375,137.12109 v 4.82618 h -4.80469 v 3.17968 h 4.80469 v 4.82617 h 3.20117 v -4.82617 h 4.80469 v -3.17968 h -4.80469 v -4.82618 z m 1,1 h 1.20117 v 4.82618 h 4.80469 v 1.17968 h -4.80469 v 4.82617 H 369.375 v -4.82617 h -4.80469 v -1.17968 h 4.80469 z"
|
||||
id="path20" />
|
||||
</g>
|
||||
<g
|
||||
id="text6-2"
|
||||
style="opacity:1">
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;fill:#ff0000;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 198.8614,307.41443 h 2.20134 v -4.82601 h 4.80484 v -2.18017 h -4.80484 v -4.82601 h -2.20134 v 4.82601 h -4.80484 v 2.18017 h 4.80484 z"
|
||||
id="path15" />
|
||||
<path
|
||||
style="font-weight:bold;font-size:21.1667px;font-family:Recharge;-inkscape-font-specification:'Recharge Bold';text-align:center;baseline-shift:baseline;text-anchor:middle;display:inline;overflow:visible;vector-effect:none;enable-background:accumulate;stop-color:#000000;stop-opacity:1"
|
||||
d="m 198.36133,295.08203 v 4.82617 h -4.80469 v 3.17969 h 4.80469 v 4.82617 h 3.20117 v -4.82617 h 4.80469 v -3.17969 h -4.80469 v -4.82617 z m 1,1 h 1.20117 v 4.82617 h 4.80469 v 1.17969 h -4.80469 v 4.82617 h -1.20117 v -4.82617 h -4.80469 v -1.17969 h 4.80469 z"
|
||||
id="path16" />
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
After Width: | Height: | Size: 20 KiB |
Binary file not shown.
@@ -0,0 +1,261 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Xplorer Dual Gantry 0.4 nozzle",
|
||||
"inherits": "Xplorer common",
|
||||
"from": "system",
|
||||
"setting_id": "DgYk8X6L1R0MKcfg",
|
||||
"instantiation": "true",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num != 0}\nG92 E0\n{endif}\n{if layer_num <= 0}\nG91\nG1 Z+10 F1200\nG90\n{endif}",
|
||||
"change_filament_gcode": ";CHANGE_FILAMENT - Start\n;Layer#=[layer_num] - Z=[layer_z]\n{if layer_z >first_layer_height}\nG91\nG1 Z+2 F1200\nG90\n{endif}\n{if layer_num != -1 || next_extruder != 0}\n Tool{next_extruder}\n{endif}\n; <----\nG1 Z[layer_z] F1200\n{if layer_num == -1 || layer_num == 0}\n M109 S[first_layer_temperature[next_extruder]] T[next_extruder]\n{else}\n M104 S[temperature[next_extruder]] T[next_extruder]\n{endif}\n; ---->\nM83\n;Layer#=[layer_num] - Z=[layer_z]\nLOG_EXTR\n;CHANGE_FILAMENT - End",
|
||||
"default_nozzle_volume_type": [
|
||||
"High Flow",
|
||||
"High Flow"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Xplorer 0.4",
|
||||
"deretraction_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F",
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0",
|
||||
"0x0"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive",
|
||||
"Direct Drive"
|
||||
],
|
||||
"extruder_variant_list": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"imex_gantry_count": "2",
|
||||
"imex_mode_active_tools": [
|
||||
"0:P",
|
||||
"0:P,1:C",
|
||||
"0:P,1:M"
|
||||
],
|
||||
"imex_mode_gcodes": [
|
||||
"SET_PRINT_MODE MODE=PRIMARY",
|
||||
"SET_PRINT_MODE MODE=COPY",
|
||||
"SET_PRINT_MODE MODE=MIRROR"
|
||||
],
|
||||
"imex_mode_names": [
|
||||
"primary",
|
||||
"copy",
|
||||
"mirror"
|
||||
],
|
||||
"imex_tool_layout": "rear-left",
|
||||
"imex_tools_per_gantry": "1",
|
||||
"is_imex": "1",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nLOG_RESUME\nLOG_EXTR",
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"6000",
|
||||
"5000",
|
||||
"6000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"50",
|
||||
"100",
|
||||
"50"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"1.25",
|
||||
"2.5",
|
||||
"1.25"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.2",
|
||||
"0.4",
|
||||
"0.2"
|
||||
],
|
||||
"machine_max_junction_deviation": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"60",
|
||||
"120",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"20",
|
||||
"40",
|
||||
"20"
|
||||
],
|
||||
"machine_start_gcode": "M104 S{first_layer_temperature[0]} T0\nM104 S{first_layer_temperature[1]} T1\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[0]} T0\nM109 S{first_layer_temperature[1]} T1\nstart_print\nG1 F5000\n{if first_layer_temperature[1] !=0 }\nTool1\nbrush_Tool1\n{endif}\n{if first_layer_temperature[0] !=0 }\nTool0\nbrush_Tool0\n{endif}\n{if first_layer_temperature[1] !=0 }\nTool1\nG1 Y280 X10.0 Z0.38 F5000.0 \nG1 Y100 X10.0 Z0.38 F1500.0 E15 \nG1 Y100 X10.4 Z0.38 F5000.0 \nG1 Y280 X10.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\nG1 F5000\n{if first_layer_temperature[0] !=0 }\nTool0\nG1 Y280 X11.0 Z0.38 F5000.0 \nG1 Y100 X11.0 Z0.38 F1500.0 E15 \nG1 Y100 X11.4 Z0.38 F5000.0 \nG1 Y280 X11.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\nG1 F5000\nM400\nSKEW_PROFILE LOAD=SKEW1\nG28 X\nG28 Y\nTool{initial_extruder}\nSTART_PRINTING_MODE\n\n",
|
||||
"max_layer_height": [
|
||||
"0.32",
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04",
|
||||
"0.04"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_type": [
|
||||
"hardened_steel",
|
||||
"hardened_steel"
|
||||
],
|
||||
"nozzle_volume": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"printable_area": [
|
||||
"10x0",
|
||||
"410x0",
|
||||
"410x342.5",
|
||||
"10x342.5"
|
||||
],
|
||||
"printable_height": "401",
|
||||
"printer_extruder_id": [
|
||||
"1",
|
||||
"2"
|
||||
],
|
||||
"printer_extruder_variant": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"printer_model": "Xplorer Dual Gantry",
|
||||
"printer_variant": "0.4",
|
||||
"retract_before_wipe": [
|
||||
"70%",
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces",
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18",
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.35",
|
||||
"1.35"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"travel_slope": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift",
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,261 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Xplorer Dual Gantry 0.6 nozzle",
|
||||
"inherits": "Xplorer common",
|
||||
"from": "system",
|
||||
"setting_id": "M1ZyjMxGz0TpRDcv",
|
||||
"instantiation": "true",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num != 0}\nG92 E0\n{endif}\n{if layer_num <= 0}\nG91\nG1 Z+10 F1200\nG90\n{endif}",
|
||||
"change_filament_gcode": ";CHANGE_FILAMENT - Start\n;Layer#=[layer_num] - Z=[layer_z]\n{if layer_z >first_layer_height}\nG91\nG1 Z+2 F1200\nG90\n{endif}\n{if layer_num != -1 || next_extruder != 0}\n Tool{next_extruder}\n{endif}\n; <----\nG1 Z[layer_z] F1200\n{if layer_num == -1 || layer_num == 0}\n M109 S[first_layer_temperature[next_extruder]] T[next_extruder]\n{else}\n M104 S[temperature[next_extruder]] T[next_extruder]\n{endif}\n; ---->\nM83\n;Layer#=[layer_num] - Z=[layer_z]\nLOG_EXTR\n;CHANGE_FILAMENT - End",
|
||||
"default_nozzle_volume_type": [
|
||||
"High Flow",
|
||||
"High Flow"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Xplorer 0.6",
|
||||
"deretraction_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F",
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0",
|
||||
"0x0"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive",
|
||||
"Direct Drive"
|
||||
],
|
||||
"extruder_variant_list": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"imex_gantry_count": "2",
|
||||
"imex_mode_active_tools": [
|
||||
"0:P",
|
||||
"0:P,1:C",
|
||||
"0:P,1:M"
|
||||
],
|
||||
"imex_mode_gcodes": [
|
||||
"SET_PRINT_MODE MODE=PRIMARY",
|
||||
"SET_PRINT_MODE MODE=COPY",
|
||||
"SET_PRINT_MODE MODE=MIRROR"
|
||||
],
|
||||
"imex_mode_names": [
|
||||
"primary",
|
||||
"copy",
|
||||
"mirror"
|
||||
],
|
||||
"imex_tool_layout": "rear-left",
|
||||
"imex_tools_per_gantry": "1",
|
||||
"is_imex": "1",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nLOG_RESUME\nLOG_EXTR",
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"6000",
|
||||
"5000",
|
||||
"6000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"50",
|
||||
"100",
|
||||
"50"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"1.25",
|
||||
"2.5",
|
||||
"1.25"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.2",
|
||||
"0.4",
|
||||
"0.2"
|
||||
],
|
||||
"machine_max_junction_deviation": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"60",
|
||||
"120",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"20",
|
||||
"40",
|
||||
"20"
|
||||
],
|
||||
"machine_start_gcode": "M104 S{first_layer_temperature[0]} T0\nM104 S{first_layer_temperature[1]} T1\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[0]} T0\nM109 S{first_layer_temperature[1]} T1\nstart_print\nG1 F5000\n{if first_layer_temperature[1] !=0 }\nTool1\nbrush_Tool1\n{endif}\n{if first_layer_temperature[0] !=0 }\nTool0\nbrush_Tool0\n{endif}\n{if first_layer_temperature[1] !=0 }\nTool1\nG1 Y280 X10.0 Z0.38 F5000.0 \nG1 Y100 X10.0 Z0.38 F1500.0 E15 \nG1 Y100 X10.4 Z0.38 F5000.0 \nG1 Y280 X10.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\nG1 F5000\n{if first_layer_temperature[0] !=0 }\nTool0\nG1 Y280 X11.0 Z0.38 F5000.0 \nG1 Y100 X11.0 Z0.38 F1500.0 E15 \nG1 Y100 X11.4 Z0.38 F5000.0 \nG1 Y280 X11.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\nG1 F5000\nM400\nSKEW_PROFILE LOAD=SKEW1\nG28 X\nG28 Y\nTool{initial_extruder}\nSTART_PRINTING_MODE\n\n",
|
||||
"max_layer_height": [
|
||||
"0.45",
|
||||
"0.45"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12",
|
||||
"0.12"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"nozzle_type": [
|
||||
"hardened_steel",
|
||||
"hardened_steel"
|
||||
],
|
||||
"nozzle_volume": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"printable_area": [
|
||||
"10x0",
|
||||
"410x0",
|
||||
"410x342.5",
|
||||
"10x342.5"
|
||||
],
|
||||
"printable_height": "401",
|
||||
"printer_extruder_id": [
|
||||
"1",
|
||||
"2"
|
||||
],
|
||||
"printer_extruder_variant": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"printer_model": "Xplorer Dual Gantry",
|
||||
"printer_variant": "0.6",
|
||||
"retract_before_wipe": [
|
||||
"70%",
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces",
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18",
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.35",
|
||||
"1.35"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"travel_slope": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift",
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,261 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Xplorer Dual Gantry 0.8 nozzle",
|
||||
"inherits": "Xplorer common",
|
||||
"from": "system",
|
||||
"setting_id": "fWRcMcf9H5NP6zrX",
|
||||
"instantiation": "true",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num != 0}\nG92 E0\n{endif}\n{if layer_num <= 0}\nG91\nG1 Z+10 F1200\nG90\n{endif}",
|
||||
"change_filament_gcode": ";CHANGE_FILAMENT - Start\n;Layer#=[layer_num] - Z=[layer_z]\n{if layer_z >first_layer_height}\nG91\nG1 Z+2 F1200\nG90\n{endif}\n{if layer_num != -1 || next_extruder != 0}\n Tool{next_extruder}\n{endif}\n; <----\nG1 Z[layer_z] F1200\n{if layer_num == -1 || layer_num == 0}\n M109 S[first_layer_temperature[next_extruder]] T[next_extruder]\n{else}\n M104 S[temperature[next_extruder]] T[next_extruder]\n{endif}\n; ---->\nM83\n;Layer#=[layer_num] - Z=[layer_z]\nLOG_EXTR\n;CHANGE_FILAMENT - End",
|
||||
"default_nozzle_volume_type": [
|
||||
"High Flow",
|
||||
"High Flow"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Xplorer 0.8",
|
||||
"deretraction_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F",
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0",
|
||||
"0x0"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive",
|
||||
"Direct Drive"
|
||||
],
|
||||
"extruder_variant_list": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"imex_gantry_count": "2",
|
||||
"imex_mode_active_tools": [
|
||||
"0:P",
|
||||
"0:P,1:C",
|
||||
"0:P,1:M"
|
||||
],
|
||||
"imex_mode_gcodes": [
|
||||
"SET_PRINT_MODE MODE=PRIMARY",
|
||||
"SET_PRINT_MODE MODE=COPY",
|
||||
"SET_PRINT_MODE MODE=MIRROR"
|
||||
],
|
||||
"imex_mode_names": [
|
||||
"primary",
|
||||
"copy",
|
||||
"mirror"
|
||||
],
|
||||
"imex_tool_layout": "rear-left",
|
||||
"imex_tools_per_gantry": "1",
|
||||
"is_imex": "1",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nLOG_RESUME\nLOG_EXTR",
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"6000",
|
||||
"5000",
|
||||
"6000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"50",
|
||||
"100",
|
||||
"50"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"1.25",
|
||||
"2.5",
|
||||
"1.25"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.2",
|
||||
"0.4",
|
||||
"0.2"
|
||||
],
|
||||
"machine_max_junction_deviation": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"60",
|
||||
"120",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"20",
|
||||
"40",
|
||||
"20"
|
||||
],
|
||||
"machine_start_gcode": "M104 S{first_layer_temperature[0]} T0\nM104 S{first_layer_temperature[1]} T1\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[0]} T0\nM109 S{first_layer_temperature[1]} T1\nstart_print\nG1 F5000\n{if first_layer_temperature[1] !=0 }\nTool1\nbrush_Tool1\n{endif}\n{if first_layer_temperature[0] !=0 }\nTool0\nbrush_Tool0\n{endif}\n{if first_layer_temperature[1] !=0 }\nTool1\nG1 Y280 X10.0 Z0.38 F5000.0 \nG1 Y100 X10.0 Z0.38 F1500.0 E15 \nG1 Y100 X10.4 Z0.38 F5000.0 \nG1 Y280 X10.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\nG1 F5000\n{if first_layer_temperature[0] !=0 }\nTool0\nG1 Y280 X11.0 Z0.38 F5000.0 \nG1 Y100 X11.0 Z0.38 F1500.0 E15 \nG1 Y100 X11.4 Z0.38 F5000.0 \nG1 Y280 X11.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\nG1 F5000\nM400\nSKEW_PROFILE LOAD=SKEW1\nG28 X\nG28 Y\nTool{initial_extruder}\nSTART_PRINTING_MODE\n\n",
|
||||
"max_layer_height": [
|
||||
"0.64",
|
||||
"0.64"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"nozzle_type": [
|
||||
"hardened_steel",
|
||||
"hardened_steel"
|
||||
],
|
||||
"nozzle_volume": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"printable_area": [
|
||||
"10x0",
|
||||
"410x0",
|
||||
"410x342.5",
|
||||
"10x342.5"
|
||||
],
|
||||
"printable_height": "401",
|
||||
"printer_extruder_id": [
|
||||
"1",
|
||||
"2"
|
||||
],
|
||||
"printer_extruder_variant": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"printer_model": "Xplorer Dual Gantry",
|
||||
"printer_variant": "0.8",
|
||||
"retract_before_wipe": [
|
||||
"70%",
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces",
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18",
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.35",
|
||||
"1.35"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"travel_slope": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift",
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,254 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Xplorer IDEX 0.4 nozzle",
|
||||
"inherits": "Xplorer common",
|
||||
"from": "system",
|
||||
"setting_id": "lOZ2qJY7SsNRW03z",
|
||||
"instantiation": "true",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num != 0}\nG92 E0\n{endif}\n{if layer_num <= 0}\nG91\nG1 Z+10 F1200\nG90\n{endif}",
|
||||
"change_filament_gcode": ";CHANGE_FILAMENT - Start\n;Layer#=[layer_num] - Z=[layer_z]\n{if layer_z >first_layer_height}\nG91\nG1 Z+2 F1200\nG90\n{endif}\n{if layer_num != -1 || next_extruder != 0}\n Tool{next_extruder}\n{endif}\n; <----\nG1 Z[layer_z] F1200\n{if layer_num == -1 || layer_num == 0}\n M109 S[first_layer_temperature[next_extruder]] T[next_extruder]\n{else}\n M104 S[temperature[next_extruder]] T[next_extruder]\n{endif}\n; ---->\nM83\n;Layer#=[layer_num] - Z=[layer_z]\nLOG_EXTR\n;CHANGE_FILAMENT - End",
|
||||
"default_nozzle_volume_type": [
|
||||
"High Flow",
|
||||
"High Flow"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Xplorer 0.4",
|
||||
"deretraction_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F",
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0",
|
||||
"0x0"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive",
|
||||
"Direct Drive"
|
||||
],
|
||||
"extruder_variant_list": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"imex_mode_active_tools": [
|
||||
"0:P",
|
||||
"0:P,1:C",
|
||||
"0:P,1:M"
|
||||
],
|
||||
"imex_mode_gcodes": [
|
||||
"SET_PRINT_MODE MODE=PRIMARY",
|
||||
"SET_PRINT_MODE MODE=COPY",
|
||||
"SET_PRINT_MODE MODE=MIRROR"
|
||||
],
|
||||
"imex_mode_names": [
|
||||
"primary",
|
||||
"copy",
|
||||
"mirror"
|
||||
],
|
||||
"imex_nozzle_clearance_x": "40",
|
||||
"imex_tool_layout": "front-left",
|
||||
"is_imex": "1",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nLOG_RESUME\nLOG_EXTR",
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"6000",
|
||||
"5000",
|
||||
"6000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"50",
|
||||
"100",
|
||||
"50"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"1.25",
|
||||
"2.5",
|
||||
"1.25"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.2",
|
||||
"0.4",
|
||||
"0.2"
|
||||
],
|
||||
"machine_max_junction_deviation": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"60",
|
||||
"120",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"20",
|
||||
"40",
|
||||
"20"
|
||||
],
|
||||
"machine_start_gcode": "M104 S{first_layer_temperature[0]} T0\nM104 S{first_layer_temperature[1]} T1\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[0]} T0\nM109 S{first_layer_temperature[1]} T1\nstart_print\nG1 F5000\n{if first_layer_temperature[1] !=0 }\nTool1\nbrush_Tool1\n{endif}\n{if first_layer_temperature[0] !=0 }\nTool0\nbrush_Tool0\n{endif}\n{if first_layer_temperature[1] !=0 }\nTool1\nG1 X280.1 Y3.0 Z0.38 F5000.0 \nG1 X100.1 Y3.0 Z0.38 F1500.0 E15 \nG1 X100.1 Y3.4 Z0.38 F5000.0 \nG1 X280.1 Y3.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\n{if first_layer_temperature[0] !=0 }\nTool0\nG1 X100.1 Y2.0 Z0.38 F5000.0 \nG1 X280.1 Y2.0 Z0.38 F1500.0 E15 \nG1 X280.1 Y2.4 Z0.38 F5000.0 \nG1 X100.1 Y2.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\nM400\nSKEW_PROFILE LOAD=SKEW1\nG28 X\nTool{initial_extruder}\nSTART_PRINTING_MODE\n\n",
|
||||
"max_layer_height": [
|
||||
"0.32",
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04",
|
||||
"0.04"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_type": [
|
||||
"hardened_steel",
|
||||
"hardened_steel"
|
||||
],
|
||||
"nozzle_volume": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"printable_height": "401",
|
||||
"printer_extruder_id": [
|
||||
"1",
|
||||
"2"
|
||||
],
|
||||
"printer_extruder_variant": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"printer_model": "Xplorer IDEX",
|
||||
"printer_variant": "0.4",
|
||||
"retract_before_wipe": [
|
||||
"70%",
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces",
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18",
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.35",
|
||||
"1.35"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"travel_slope": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift",
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,254 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Xplorer IDEX 0.6 nozzle",
|
||||
"inherits": "Xplorer common",
|
||||
"from": "system",
|
||||
"setting_id": "S4ZLGZuPtR3yC4IZ",
|
||||
"instantiation": "true",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num != 0}\nG92 E0\n{endif}\n{if layer_num <= 0}\nG91\nG1 Z+10 F1200\nG90\n{endif}",
|
||||
"change_filament_gcode": ";CHANGE_FILAMENT - Start\n;Layer#=[layer_num] - Z=[layer_z]\n{if layer_z >first_layer_height}\nG91\nG1 Z+2 F1200\nG90\n{endif}\n{if layer_num != -1 || next_extruder != 0}\n Tool{next_extruder}\n{endif}\n; <----\nG1 Z[layer_z] F1200\n{if layer_num == -1 || layer_num == 0}\n M109 S[first_layer_temperature[next_extruder]] T[next_extruder]\n{else}\n M104 S[temperature[next_extruder]] T[next_extruder]\n{endif}\n; ---->\nM83\n;Layer#=[layer_num] - Z=[layer_z]\nLOG_EXTR\n;CHANGE_FILAMENT - End",
|
||||
"default_nozzle_volume_type": [
|
||||
"High Flow",
|
||||
"High Flow"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Xplorer 0.6",
|
||||
"deretraction_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F",
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0",
|
||||
"0x0"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive",
|
||||
"Direct Drive"
|
||||
],
|
||||
"extruder_variant_list": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"imex_mode_active_tools": [
|
||||
"0:P",
|
||||
"0:P,1:C",
|
||||
"0:P,1:M"
|
||||
],
|
||||
"imex_mode_gcodes": [
|
||||
"SET_PRINT_MODE MODE=PRIMARY",
|
||||
"SET_PRINT_MODE MODE=COPY",
|
||||
"SET_PRINT_MODE MODE=MIRROR"
|
||||
],
|
||||
"imex_mode_names": [
|
||||
"primary",
|
||||
"copy",
|
||||
"mirror"
|
||||
],
|
||||
"imex_nozzle_clearance_x": "40",
|
||||
"imex_tool_layout": "front-left",
|
||||
"is_imex": "1",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nLOG_RESUME\nLOG_EXTR",
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"6000",
|
||||
"5000",
|
||||
"6000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"50",
|
||||
"100",
|
||||
"50"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"1.25",
|
||||
"2.5",
|
||||
"1.25"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.2",
|
||||
"0.4",
|
||||
"0.2"
|
||||
],
|
||||
"machine_max_junction_deviation": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"60",
|
||||
"120",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"20",
|
||||
"40",
|
||||
"20"
|
||||
],
|
||||
"machine_start_gcode": "M104 S{first_layer_temperature[0]} T0\nM104 S{first_layer_temperature[1]} T1\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[0]} T0\nM109 S{first_layer_temperature[1]} T1\nstart_print\nG1 F5000\n{if first_layer_temperature[1] !=0 }\nTool1\nbrush_Tool1\n{endif}\n{if first_layer_temperature[0] !=0 }\nTool0\nbrush_Tool0\n{endif}\n{if first_layer_temperature[1] !=0 }\nTool1\nG1 X280.1 Y3.0 Z0.38 F5000.0 \nG1 X100.1 Y3.0 Z0.38 F1500.0 E15 \nG1 X100.1 Y3.4 Z0.38 F5000.0 \nG1 X280.1 Y3.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\n{if first_layer_temperature[0] !=0 }\nTool0\nG1 X100.1 Y2.0 Z0.38 F5000.0 \nG1 X280.1 Y2.0 Z0.38 F1500.0 E15 \nG1 X280.1 Y2.4 Z0.38 F5000.0 \nG1 X100.1 Y2.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\nM400\nSKEW_PROFILE LOAD=SKEW1\nG28 X\nTool{initial_extruder}\nSTART_PRINTING_MODE\n\n",
|
||||
"max_layer_height": [
|
||||
"0.45",
|
||||
"0.45"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12",
|
||||
"0.12"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"nozzle_type": [
|
||||
"hardened_steel",
|
||||
"hardened_steel"
|
||||
],
|
||||
"nozzle_volume": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"printable_height": "401",
|
||||
"printer_extruder_id": [
|
||||
"1",
|
||||
"2"
|
||||
],
|
||||
"printer_extruder_variant": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"printer_model": "Xplorer IDEX",
|
||||
"printer_variant": "0.6",
|
||||
"retract_before_wipe": [
|
||||
"70%",
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces",
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18",
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.35",
|
||||
"1.35"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"travel_slope": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift",
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,254 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Xplorer IDEX 0.8 nozzle",
|
||||
"inherits": "Xplorer common",
|
||||
"from": "system",
|
||||
"setting_id": "U50ftmONKAXI4OQ9",
|
||||
"instantiation": "true",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num != 0}\nG92 E0\n{endif}\n{if layer_num <= 0}\nG91\nG1 Z+10 F1200\nG90\n{endif}",
|
||||
"change_filament_gcode": ";CHANGE_FILAMENT - Start\n;Layer#=[layer_num] - Z=[layer_z]\n{if layer_z >first_layer_height}\nG91\nG1 Z+2 F1200\nG90\n{endif}\n{if layer_num != -1 || next_extruder != 0}\n Tool{next_extruder}\n{endif}\n; <----\nG1 Z[layer_z] F1200\n{if layer_num == -1 || layer_num == 0}\n M109 S[first_layer_temperature[next_extruder]] T[next_extruder]\n{else}\n M104 S[temperature[next_extruder]] T[next_extruder]\n{endif}\n; ---->\nM83\n;Layer#=[layer_num] - Z=[layer_z]\nLOG_EXTR\n;CHANGE_FILAMENT - End",
|
||||
"default_nozzle_volume_type": [
|
||||
"High Flow",
|
||||
"High Flow"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Xplorer 0.8",
|
||||
"deretraction_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F",
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0",
|
||||
"0x0"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive",
|
||||
"Direct Drive"
|
||||
],
|
||||
"extruder_variant_list": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"imex_mode_active_tools": [
|
||||
"0:P",
|
||||
"0:P,1:C",
|
||||
"0:P,1:M"
|
||||
],
|
||||
"imex_mode_gcodes": [
|
||||
"SET_PRINT_MODE MODE=PRIMARY",
|
||||
"SET_PRINT_MODE MODE=COPY",
|
||||
"SET_PRINT_MODE MODE=MIRROR"
|
||||
],
|
||||
"imex_mode_names": [
|
||||
"primary",
|
||||
"copy",
|
||||
"mirror"
|
||||
],
|
||||
"imex_nozzle_clearance_x": "40",
|
||||
"imex_tool_layout": "front-left",
|
||||
"is_imex": "1",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nLOG_RESUME\nLOG_EXTR",
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"6000",
|
||||
"5000",
|
||||
"6000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"50",
|
||||
"100",
|
||||
"50"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"1.25",
|
||||
"2.5",
|
||||
"1.25"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.2",
|
||||
"0.4",
|
||||
"0.2"
|
||||
],
|
||||
"machine_max_junction_deviation": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"60",
|
||||
"120",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"20",
|
||||
"40",
|
||||
"20"
|
||||
],
|
||||
"machine_start_gcode": "M104 S{first_layer_temperature[0]} T0\nM104 S{first_layer_temperature[1]} T1\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[0]} T0\nM109 S{first_layer_temperature[1]} T1\nstart_print\nG1 F5000\n{if first_layer_temperature[1] !=0 }\nTool1\nbrush_Tool1\n{endif}\n{if first_layer_temperature[0] !=0 }\nTool0\nbrush_Tool0\n{endif}\n{if first_layer_temperature[1] !=0 }\nTool1\nG1 X280.1 Y3.0 Z0.38 F5000.0 \nG1 X100.1 Y3.0 Z0.38 F1500.0 E15 \nG1 X100.1 Y3.4 Z0.38 F5000.0 \nG1 X280.1 Y3.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\n{if first_layer_temperature[0] !=0 }\nTool0\nG1 X100.1 Y2.0 Z0.38 F5000.0 \nG1 X280.1 Y2.0 Z0.38 F1500.0 E15 \nG1 X280.1 Y2.4 Z0.38 F5000.0 \nG1 X100.1 Y2.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\nM400\nSKEW_PROFILE LOAD=SKEW1\nG28 X\nTool{initial_extruder}\nSTART_PRINTING_MODE\n\n",
|
||||
"max_layer_height": [
|
||||
"0.64",
|
||||
"0.64"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"nozzle_type": [
|
||||
"hardened_steel",
|
||||
"hardened_steel"
|
||||
],
|
||||
"nozzle_volume": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"printable_height": "401",
|
||||
"printer_extruder_id": [
|
||||
"1",
|
||||
"2"
|
||||
],
|
||||
"printer_extruder_variant": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"printer_model": "Xplorer IDEX",
|
||||
"printer_variant": "0.8",
|
||||
"retract_before_wipe": [
|
||||
"70%",
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces",
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18",
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.35",
|
||||
"1.35"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"travel_slope": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift",
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,399 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Xplorer IQEX 0.4 nozzle",
|
||||
"inherits": "Xplorer common",
|
||||
"from": "system",
|
||||
"setting_id": "fbUJR4RMoMczxSkH",
|
||||
"instantiation": "true",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num != 0}\nG92 E0\n{endif}\n{if layer_num <= 0}\nG91\nG1 Z+10 F1200\nG90\n{endif}",
|
||||
"change_filament_gcode": ";CHANGE_FILAMENT - Start\n;Layer#=[layer_num] - Z=[layer_z]\n{if layer_z >first_layer_height}\nG91\nG1 Z+2 F1200\nG90\n{endif}\n{if layer_num != -1 || next_extruder != 0}\n Tool{next_extruder}\n{endif}\n; <----\nG1 Z[layer_z] F1200\n{if layer_num == -1 || layer_num == 0}\n M109 S[first_layer_temperature[next_extruder]] T[next_extruder]\n{else}\n M104 S[temperature[next_extruder]] T[next_extruder]\n{endif}\n; ---->\nM83\n;Layer#=[layer_num] - Z=[layer_z]\nLOG_EXTR\n;CHANGE_FILAMENT - End",
|
||||
"default_nozzle_volume_type": [
|
||||
"High Flow",
|
||||
"High Flow",
|
||||
"High Flow",
|
||||
"High Flow"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Xplorer 0.4",
|
||||
"deretraction_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F",
|
||||
"#FCE94F",
|
||||
"#FCE94F",
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0",
|
||||
"0x0",
|
||||
"0x0",
|
||||
"0x0"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive",
|
||||
"Direct Drive",
|
||||
"Direct Drive",
|
||||
"Direct Drive"
|
||||
],
|
||||
"extruder_variant_list": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"imex_gantry_count": "2",
|
||||
"imex_mode_active_tools": [
|
||||
"0:P",
|
||||
"0:P,1:C",
|
||||
"0:P,1:M",
|
||||
"0:P,1:C,2:C,3:C",
|
||||
"0:P,1:C,2:M,3:M",
|
||||
"0:P,1:S,2:C,3:C",
|
||||
"0:P,1:S,2:M,3:M"
|
||||
],
|
||||
"imex_mode_gcodes": [
|
||||
"SET_PRINT_MODE MODE=PRIMARY",
|
||||
"SET_PRINT_MODE MODE=COPY01",
|
||||
"SET_PRINT_MODE MODE=MIRROR01",
|
||||
"SET_PRINT_MODE MODE=COPY0123",
|
||||
"SET_PRINT_MODE MODE=MIRROR0123",
|
||||
"SET_PRINT_MODE MODE=MULTICOLOR_COPY01",
|
||||
"SET_PRINT_MODE MODE=MULTICOLOR_MIRROR01"
|
||||
],
|
||||
"imex_mode_names": [
|
||||
"primary",
|
||||
"copy",
|
||||
"mirror",
|
||||
"iq-copy",
|
||||
"iq-mirror",
|
||||
"mc-copy",
|
||||
"mc-mirror"
|
||||
],
|
||||
"imex_nozzle_clearance_x": "40",
|
||||
"imex_tool_layout": "rear-left",
|
||||
"is_imex": "1",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nLOG_RESUME\nLOG_EXTR",
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"6000",
|
||||
"5000",
|
||||
"6000",
|
||||
"5000",
|
||||
"6000",
|
||||
"5000",
|
||||
"6000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"50",
|
||||
"100",
|
||||
"50",
|
||||
"100",
|
||||
"50",
|
||||
"100",
|
||||
"50"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"1.25",
|
||||
"2.5",
|
||||
"1.25",
|
||||
"2.5",
|
||||
"1.25",
|
||||
"2.5",
|
||||
"1.25"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.2",
|
||||
"0.4",
|
||||
"0.2",
|
||||
"0.4",
|
||||
"0.2",
|
||||
"0.4",
|
||||
"0.2"
|
||||
],
|
||||
"machine_max_junction_deviation": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"60",
|
||||
"120",
|
||||
"60",
|
||||
"120",
|
||||
"60",
|
||||
"120",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"20",
|
||||
"40",
|
||||
"20",
|
||||
"40",
|
||||
"20",
|
||||
"40",
|
||||
"20"
|
||||
],
|
||||
"machine_start_gcode": "M104 S{first_layer_temperature[0]} T0\nM104 S{first_layer_temperature[1]} T1\nM104 S{first_layer_temperature[2]} T2\nM104 S{first_layer_temperature[3]} T3\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[0]} T0\nM109 S{first_layer_temperature[1]} T1\nM109 S{first_layer_temperature[2]} T2\nM109 S{first_layer_temperature[3]} T3\nstart_print\nG1 F5000\n{if first_layer_temperature[3] !=0 }\nTool3\nbrush_Tool3\n{endif}\n{if first_layer_temperature[2] !=0 }\nTool2\nbrush_Tool2\n{endif}\n{if first_layer_temperature[1] !=0 }\nTool1\nbrush_Tool1\n{endif}\n{if first_layer_temperature[0] !=0 }\nTool0\nbrush_Tool0\n{endif}\n{if first_layer_temperature[3] !=0 }\nTool3\nG1 Y280 X407.0 Z0.38 F5000.0 \nG1 Y175 X407.0 Z0.38 F1500.0 E15 \nG1 Y175 X407.4 Z0.38 F5000.0 \nG1 Y280 X407.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\n{if first_layer_temperature[2] !=0 }\nTool2\nG1 Y280 X12.0 Z0.38 F5000.0 \nG1 Y175 X12.0 Z0.38 F1500.0 E15 \nG1 Y175 X12.4 Z0.38 F5000.0 \nG1 Y280 X12.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\n{if first_layer_temperature[1] !=0 }\nTool1\nG1 Y280 X408.0 Z0.38 F5000.0 \nG1 Y175 X408.0 Z0.38 F1500.0 E15 \nG1 Y175 X408.4 Z0.38 F5000.0 \nG1 Y280 X408.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\nG1 F5000\n{if first_layer_temperature[0] !=0 }\nTool0\nG1 Y280 X11.0 Z0.38 F5000.0 \nG1 Y175 X11.0 Z0.38 F1500.0 E15 \nG1 Y175 X11.4 Z0.38 F5000.0 \nG1 Y280 X11.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\nG1 F5000\nM400\nSKEW_PROFILE LOAD=SKEW1\nG28 X\nG28 Y\nTool{initial_extruder}\nSTART_PRINTING_MODE\n\n",
|
||||
"max_layer_height": [
|
||||
"0.32",
|
||||
"0.32",
|
||||
"0.32",
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04",
|
||||
"0.04",
|
||||
"0.04",
|
||||
"0.04"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4",
|
||||
"0.4"
|
||||
],
|
||||
"nozzle_type": [
|
||||
"hardened_steel",
|
||||
"hardened_steel",
|
||||
"hardened_steel",
|
||||
"hardened_steel"
|
||||
],
|
||||
"nozzle_volume": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"printable_area": [
|
||||
"10x0",
|
||||
"410x0",
|
||||
"410x342.5",
|
||||
"10x342.5"
|
||||
],
|
||||
"printable_height": "401",
|
||||
"printer_extruder_id": [
|
||||
"1",
|
||||
"2",
|
||||
"3",
|
||||
"4"
|
||||
],
|
||||
"printer_extruder_variant": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"printer_model": "Xplorer IQEX",
|
||||
"printer_variant": "0.4",
|
||||
"retract_before_wipe": [
|
||||
"70%",
|
||||
"70%",
|
||||
"70%",
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2",
|
||||
"2",
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"400",
|
||||
"400",
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces",
|
||||
"All Surfaces",
|
||||
"All Surfaces",
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.35",
|
||||
"1.35",
|
||||
"1.35",
|
||||
"1.35"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2",
|
||||
"2",
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"travel_slope": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift",
|
||||
"Normal Lift",
|
||||
"Normal Lift",
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,399 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Xplorer IQEX 0.6 nozzle",
|
||||
"inherits": "Xplorer common",
|
||||
"from": "system",
|
||||
"setting_id": "hOYAHBik6rxU1B0d",
|
||||
"instantiation": "true",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num != 0}\nG92 E0\n{endif}\n{if layer_num <= 0}\nG91\nG1 Z+10 F1200\nG90\n{endif}",
|
||||
"change_filament_gcode": ";CHANGE_FILAMENT - Start\n;Layer#=[layer_num] - Z=[layer_z]\n{if layer_z >first_layer_height}\nG91\nG1 Z+2 F1200\nG90\n{endif}\n{if layer_num != -1 || next_extruder != 0}\n Tool{next_extruder}\n{endif}\n; <----\nG1 Z[layer_z] F1200\n{if layer_num == -1 || layer_num == 0}\n M109 S[first_layer_temperature[next_extruder]] T[next_extruder]\n{else}\n M104 S[temperature[next_extruder]] T[next_extruder]\n{endif}\n; ---->\nM83\n;Layer#=[layer_num] - Z=[layer_z]\nLOG_EXTR\n;CHANGE_FILAMENT - End",
|
||||
"default_nozzle_volume_type": [
|
||||
"High Flow",
|
||||
"High Flow",
|
||||
"High Flow",
|
||||
"High Flow"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Xplorer 0.6",
|
||||
"deretraction_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F",
|
||||
"#FCE94F",
|
||||
"#FCE94F",
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0",
|
||||
"0x0",
|
||||
"0x0",
|
||||
"0x0"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive",
|
||||
"Direct Drive",
|
||||
"Direct Drive",
|
||||
"Direct Drive"
|
||||
],
|
||||
"extruder_variant_list": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"imex_gantry_count": "2",
|
||||
"imex_mode_active_tools": [
|
||||
"0:P",
|
||||
"0:P,1:C",
|
||||
"0:P,1:M",
|
||||
"0:P,1:C,2:C,3:C",
|
||||
"0:P,1:C,2:M,3:M",
|
||||
"0:P,1:S,2:C,3:C",
|
||||
"0:P,1:S,2:M,3:M"
|
||||
],
|
||||
"imex_mode_gcodes": [
|
||||
"SET_PRINT_MODE MODE=PRIMARY",
|
||||
"SET_PRINT_MODE MODE=COPY01",
|
||||
"SET_PRINT_MODE MODE=MIRROR01",
|
||||
"SET_PRINT_MODE MODE=COPY0123",
|
||||
"SET_PRINT_MODE MODE=MIRROR0123",
|
||||
"SET_PRINT_MODE MODE=MULTICOLOR_COPY01",
|
||||
"SET_PRINT_MODE MODE=MULTICOLOR_MIRROR01"
|
||||
],
|
||||
"imex_mode_names": [
|
||||
"primary",
|
||||
"copy",
|
||||
"mirror",
|
||||
"iq-copy",
|
||||
"iq-mirror",
|
||||
"mc-copy",
|
||||
"mc-mirror"
|
||||
],
|
||||
"imex_nozzle_clearance_x": "40",
|
||||
"imex_tool_layout": "rear-left",
|
||||
"is_imex": "1",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nLOG_RESUME\nLOG_EXTR",
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"6000",
|
||||
"5000",
|
||||
"6000",
|
||||
"5000",
|
||||
"6000",
|
||||
"5000",
|
||||
"6000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"50",
|
||||
"100",
|
||||
"50",
|
||||
"100",
|
||||
"50",
|
||||
"100",
|
||||
"50"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"1.25",
|
||||
"2.5",
|
||||
"1.25",
|
||||
"2.5",
|
||||
"1.25",
|
||||
"2.5",
|
||||
"1.25"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.2",
|
||||
"0.4",
|
||||
"0.2",
|
||||
"0.4",
|
||||
"0.2",
|
||||
"0.4",
|
||||
"0.2"
|
||||
],
|
||||
"machine_max_junction_deviation": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"60",
|
||||
"120",
|
||||
"60",
|
||||
"120",
|
||||
"60",
|
||||
"120",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"20",
|
||||
"40",
|
||||
"20",
|
||||
"40",
|
||||
"20",
|
||||
"40",
|
||||
"20"
|
||||
],
|
||||
"machine_start_gcode": "M104 S{first_layer_temperature[0]} T0\nM104 S{first_layer_temperature[1]} T1\nM104 S{first_layer_temperature[2]} T2\nM104 S{first_layer_temperature[3]} T3\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[0]} T0\nM109 S{first_layer_temperature[1]} T1\nM109 S{first_layer_temperature[2]} T2\nM109 S{first_layer_temperature[3]} T3\nstart_print\nG1 F5000\n{if first_layer_temperature[3] !=0 }\nTool3\nbrush_Tool3\n{endif}\n{if first_layer_temperature[2] !=0 }\nTool2\nbrush_Tool2\n{endif}\n{if first_layer_temperature[1] !=0 }\nTool1\nbrush_Tool1\n{endif}\n{if first_layer_temperature[0] !=0 }\nTool0\nbrush_Tool0\n{endif}\n{if first_layer_temperature[3] !=0 }\nTool3\nG1 Y280 X407.0 Z0.38 F5000.0 \nG1 Y175 X407.0 Z0.38 F1500.0 E15 \nG1 Y175 X407.4 Z0.38 F5000.0 \nG1 Y280 X407.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\n{if first_layer_temperature[2] !=0 }\nTool2\nG1 Y280 X12.0 Z0.38 F5000.0 \nG1 Y175 X12.0 Z0.38 F1500.0 E15 \nG1 Y175 X12.4 Z0.38 F5000.0 \nG1 Y280 X12.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\n{if first_layer_temperature[1] !=0 }\nTool1\nG1 Y280 X408.0 Z0.38 F5000.0 \nG1 Y175 X408.0 Z0.38 F1500.0 E15 \nG1 Y175 X408.4 Z0.38 F5000.0 \nG1 Y280 X408.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\nG1 F5000\n{if first_layer_temperature[0] !=0 }\nTool0\nG1 Y280 X11.0 Z0.38 F5000.0 \nG1 Y175 X11.0 Z0.38 F1500.0 E15 \nG1 Y175 X11.4 Z0.38 F5000.0 \nG1 Y280 X11.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\nG1 F5000\nM400\nSKEW_PROFILE LOAD=SKEW1\nG28 X\nG28 Y\nTool{initial_extruder}\nSTART_PRINTING_MODE\n\n",
|
||||
"max_layer_height": [
|
||||
"0.45",
|
||||
"0.45",
|
||||
"0.45",
|
||||
"0.45"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12",
|
||||
"0.12",
|
||||
"0.12",
|
||||
"0.12"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.6",
|
||||
"0.6",
|
||||
"0.6",
|
||||
"0.6"
|
||||
],
|
||||
"nozzle_type": [
|
||||
"hardened_steel",
|
||||
"hardened_steel",
|
||||
"hardened_steel",
|
||||
"hardened_steel"
|
||||
],
|
||||
"nozzle_volume": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"printable_area": [
|
||||
"10x0",
|
||||
"410x0",
|
||||
"410x342.5",
|
||||
"10x342.5"
|
||||
],
|
||||
"printable_height": "401",
|
||||
"printer_extruder_id": [
|
||||
"1",
|
||||
"2",
|
||||
"3",
|
||||
"4"
|
||||
],
|
||||
"printer_extruder_variant": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"printer_model": "Xplorer IQEX",
|
||||
"printer_variant": "0.6",
|
||||
"retract_before_wipe": [
|
||||
"70%",
|
||||
"70%",
|
||||
"70%",
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2",
|
||||
"2",
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"400",
|
||||
"400",
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces",
|
||||
"All Surfaces",
|
||||
"All Surfaces",
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.35",
|
||||
"1.35",
|
||||
"1.35",
|
||||
"1.35"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2",
|
||||
"2",
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"travel_slope": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift",
|
||||
"Normal Lift",
|
||||
"Normal Lift",
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,399 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Xplorer IQEX 0.8 nozzle",
|
||||
"inherits": "Xplorer common",
|
||||
"from": "system",
|
||||
"setting_id": "e048HgBDJy6XnaaO",
|
||||
"instantiation": "true",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num != 0}\nG92 E0\n{endif}\n{if layer_num <= 0}\nG91\nG1 Z+10 F1200\nG90\n{endif}",
|
||||
"change_filament_gcode": ";CHANGE_FILAMENT - Start\n;Layer#=[layer_num] - Z=[layer_z]\n{if layer_z >first_layer_height}\nG91\nG1 Z+2 F1200\nG90\n{endif}\n{if layer_num != -1 || next_extruder != 0}\n Tool{next_extruder}\n{endif}\n; <----\nG1 Z[layer_z] F1200\n{if layer_num == -1 || layer_num == 0}\n M109 S[first_layer_temperature[next_extruder]] T[next_extruder]\n{else}\n M104 S[temperature[next_extruder]] T[next_extruder]\n{endif}\n; ---->\nM83\n;Layer#=[layer_num] - Z=[layer_z]\nLOG_EXTR\n;CHANGE_FILAMENT - End",
|
||||
"default_nozzle_volume_type": [
|
||||
"High Flow",
|
||||
"High Flow",
|
||||
"High Flow",
|
||||
"High Flow"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Xplorer 0.8",
|
||||
"deretraction_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F",
|
||||
"#FCE94F",
|
||||
"#FCE94F",
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0",
|
||||
"0x0",
|
||||
"0x0",
|
||||
"0x0"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive",
|
||||
"Direct Drive",
|
||||
"Direct Drive",
|
||||
"Direct Drive"
|
||||
],
|
||||
"extruder_variant_list": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"imex_gantry_count": "2",
|
||||
"imex_mode_active_tools": [
|
||||
"0:P",
|
||||
"0:P,1:C",
|
||||
"0:P,1:M",
|
||||
"0:P,1:C,2:C,3:C",
|
||||
"0:P,1:C,2:M,3:M",
|
||||
"0:P,1:S,2:C,3:C",
|
||||
"0:P,1:S,2:M,3:M"
|
||||
],
|
||||
"imex_mode_gcodes": [
|
||||
"SET_PRINT_MODE MODE=PRIMARY",
|
||||
"SET_PRINT_MODE MODE=COPY01",
|
||||
"SET_PRINT_MODE MODE=MIRROR01",
|
||||
"SET_PRINT_MODE MODE=COPY0123",
|
||||
"SET_PRINT_MODE MODE=MIRROR0123",
|
||||
"SET_PRINT_MODE MODE=MULTICOLOR_COPY01",
|
||||
"SET_PRINT_MODE MODE=MULTICOLOR_MIRROR01"
|
||||
],
|
||||
"imex_mode_names": [
|
||||
"primary",
|
||||
"copy",
|
||||
"mirror",
|
||||
"iq-copy",
|
||||
"iq-mirror",
|
||||
"mc-copy",
|
||||
"mc-mirror"
|
||||
],
|
||||
"imex_nozzle_clearance_x": "40",
|
||||
"imex_tool_layout": "rear-left",
|
||||
"is_imex": "1",
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nLOG_RESUME\nLOG_EXTR",
|
||||
"long_retractions_when_cut": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"6000",
|
||||
"5000",
|
||||
"6000",
|
||||
"5000",
|
||||
"6000",
|
||||
"5000",
|
||||
"6000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500",
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"50",
|
||||
"100",
|
||||
"50",
|
||||
"100",
|
||||
"50",
|
||||
"100",
|
||||
"50"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"1.25",
|
||||
"2.5",
|
||||
"1.25",
|
||||
"2.5",
|
||||
"1.25",
|
||||
"2.5",
|
||||
"1.25"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5",
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.2",
|
||||
"0.4",
|
||||
"0.2",
|
||||
"0.4",
|
||||
"0.2",
|
||||
"0.4",
|
||||
"0.2"
|
||||
],
|
||||
"machine_max_junction_deviation": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"60",
|
||||
"120",
|
||||
"60",
|
||||
"120",
|
||||
"60",
|
||||
"120",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150",
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"20",
|
||||
"40",
|
||||
"20",
|
||||
"40",
|
||||
"20",
|
||||
"40",
|
||||
"20"
|
||||
],
|
||||
"machine_start_gcode": "M104 S{first_layer_temperature[0]} T0\nM104 S{first_layer_temperature[1]} T1\nM104 S{first_layer_temperature[2]} T2\nM104 S{first_layer_temperature[3]} T3\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nM109 S{first_layer_temperature[0]} T0\nM109 S{first_layer_temperature[1]} T1\nM109 S{first_layer_temperature[2]} T2\nM109 S{first_layer_temperature[3]} T3\nstart_print\nG1 F5000\n{if first_layer_temperature[3] !=0 }\nTool3\nbrush_Tool3\n{endif}\n{if first_layer_temperature[2] !=0 }\nTool2\nbrush_Tool2\n{endif}\n{if first_layer_temperature[1] !=0 }\nTool1\nbrush_Tool1\n{endif}\n{if first_layer_temperature[0] !=0 }\nTool0\nbrush_Tool0\n{endif}\n{if first_layer_temperature[3] !=0 }\nTool3\nG1 Y280 X407.0 Z0.38 F5000.0 \nG1 Y175 X407.0 Z0.38 F1500.0 E15 \nG1 Y175 X407.4 Z0.38 F5000.0 \nG1 Y280 X407.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\n{if first_layer_temperature[2] !=0 }\nTool2\nG1 Y280 X12.0 Z0.38 F5000.0 \nG1 Y175 X12.0 Z0.38 F1500.0 E15 \nG1 Y175 X12.4 Z0.38 F5000.0 \nG1 Y280 X12.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\n{if first_layer_temperature[1] !=0 }\nTool1\nG1 Y280 X408.0 Z0.38 F5000.0 \nG1 Y175 X408.0 Z0.38 F1500.0 E15 \nG1 Y175 X408.4 Z0.38 F5000.0 \nG1 Y280 X408.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\nG1 F5000\n{if first_layer_temperature[0] !=0 }\nTool0\nG1 Y280 X11.0 Z0.38 F5000.0 \nG1 Y175 X11.0 Z0.38 F1500.0 E15 \nG1 Y175 X11.4 Z0.38 F5000.0 \nG1 Y280 X11.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z2 F2000\n{endif}\nG1 F5000\nM400\nSKEW_PROFILE LOAD=SKEW1\nG28 X\nG28 Y\nTool{initial_extruder}\nSTART_PRINTING_MODE\n\n",
|
||||
"max_layer_height": [
|
||||
"0.64",
|
||||
"0.64",
|
||||
"0.64",
|
||||
"0.64"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8",
|
||||
"0.8"
|
||||
],
|
||||
"nozzle_type": [
|
||||
"hardened_steel",
|
||||
"hardened_steel",
|
||||
"hardened_steel",
|
||||
"hardened_steel"
|
||||
],
|
||||
"nozzle_volume": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"printable_area": [
|
||||
"10x0",
|
||||
"410x0",
|
||||
"410x342.5",
|
||||
"10x342.5"
|
||||
],
|
||||
"printable_height": "401",
|
||||
"printer_extruder_id": [
|
||||
"1",
|
||||
"2",
|
||||
"3",
|
||||
"4"
|
||||
],
|
||||
"printer_extruder_variant": [
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow",
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"printer_model": "Xplorer IQEX",
|
||||
"printer_variant": "0.8",
|
||||
"retract_before_wipe": [
|
||||
"70%",
|
||||
"70%",
|
||||
"70%",
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2",
|
||||
"2",
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2",
|
||||
"0.2"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"400",
|
||||
"400",
|
||||
"400",
|
||||
"400"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces",
|
||||
"All Surfaces",
|
||||
"All Surfaces",
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0",
|
||||
"0",
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18",
|
||||
"18",
|
||||
"18",
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.35",
|
||||
"1.35",
|
||||
"1.35",
|
||||
"1.35"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2",
|
||||
"2",
|
||||
"2",
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"120",
|
||||
"120",
|
||||
"120",
|
||||
"120"
|
||||
],
|
||||
"travel_slope": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"1",
|
||||
"1",
|
||||
"1",
|
||||
"1"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift",
|
||||
"Normal Lift",
|
||||
"Normal Lift",
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,167 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Xplorer Single 0.4 nozzle",
|
||||
"inherits": "Xplorer common",
|
||||
"from": "system",
|
||||
"setting_id": "P4sDniCHVUne9JJF",
|
||||
"instantiation": "true",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num != 0}\nG92 E0\n{endif}",
|
||||
"change_filament_gcode": "M600",
|
||||
"default_nozzle_volume_type": [
|
||||
"High Flow"
|
||||
],
|
||||
"default_print_profile": "0.20mm Standard @Xplorer 0.4",
|
||||
"deretraction_speed": [
|
||||
"120"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive"
|
||||
],
|
||||
"extruder_variant_list": [
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nLOG_RESUME\nLOG_EXTR",
|
||||
"long_retractions_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"6000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"50"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"1.25"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.2"
|
||||
],
|
||||
"machine_max_junction_deviation": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"20"
|
||||
],
|
||||
"machine_start_gcode": "M104 S[first_layer_temperature] T[initial_tool]\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG4 P10000 ; wait for temp stabilisation\nstart_print \nTool[initial_tool]\nG90\nM109 S[first_layer_temperature] T[initial_tool]\nBrush_Tool[initial_tool]\nG1 Z5.0 F3000 \nG1 X100 Y1.0 Z0.38 F5000.0 \nG1 X280 Y1.0 Z0.38 F1500.0 E15 \nG1 X280 Y1.4 Z0.38 F5000.0 \nG1 X100 Y1.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z5.0 F3000\nSKEW_PROFILE LOAD=SKEW1\n",
|
||||
"max_layer_height": [
|
||||
"0.32"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.04"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.4"
|
||||
],
|
||||
"printable_height": "401",
|
||||
"printer_extruder_id": [
|
||||
"1"
|
||||
],
|
||||
"printer_extruder_variant": [
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"printer_model": "Xplorer Single",
|
||||
"printer_variant": "0.4",
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0.2"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"400"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.35"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"120"
|
||||
],
|
||||
"travel_slope": [
|
||||
"1"
|
||||
],
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"1"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,167 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Xplorer Single 0.6 nozzle",
|
||||
"inherits": "Xplorer common",
|
||||
"from": "system",
|
||||
"setting_id": "AN4SjJRQBVxztQoT",
|
||||
"instantiation": "true",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num != 0}\nG92 E0\n{endif}",
|
||||
"change_filament_gcode": "M600",
|
||||
"default_nozzle_volume_type": [
|
||||
"High Flow"
|
||||
],
|
||||
"default_print_profile": "0.30mm Standard @Xplorer 0.6",
|
||||
"deretraction_speed": [
|
||||
"120"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive"
|
||||
],
|
||||
"extruder_variant_list": [
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nLOG_RESUME\nLOG_EXTR",
|
||||
"long_retractions_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"6000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"50"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"1.25"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.2"
|
||||
],
|
||||
"machine_max_junction_deviation": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"20"
|
||||
],
|
||||
"machine_start_gcode": "M104 S[first_layer_temperature] T[initial_tool]\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG4 P10000 ; wait for temp stabilisation\nstart_print \nTool[initial_tool]\nG90\nM109 S[first_layer_temperature] T[initial_tool]\nBrush_Tool[initial_tool]\nG1 Z5.0 F3000 \nG1 X100 Y1.0 Z0.38 F5000.0 \nG1 X280 Y1.0 Z0.38 F1500.0 E15 \nG1 X280 Y1.4 Z0.38 F5000.0 \nG1 X100 Y1.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z5.0 F3000\nSKEW_PROFILE LOAD=SKEW1\n",
|
||||
"max_layer_height": [
|
||||
"0.45"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.12"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.6"
|
||||
],
|
||||
"printable_height": "401",
|
||||
"printer_extruder_id": [
|
||||
"1"
|
||||
],
|
||||
"printer_extruder_variant": [
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"printer_model": "Xplorer Single",
|
||||
"printer_variant": "0.6",
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0.2"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"400"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.35"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"120"
|
||||
],
|
||||
"travel_slope": [
|
||||
"1"
|
||||
],
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"1"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,167 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Xplorer Single 0.8 nozzle",
|
||||
"inherits": "Xplorer common",
|
||||
"from": "system",
|
||||
"setting_id": "rGCuBhLqBfV0zFLJ",
|
||||
"instantiation": "true",
|
||||
"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\n{if layer_num != 0}\nG92 E0\n{endif}",
|
||||
"change_filament_gcode": "M600",
|
||||
"default_nozzle_volume_type": [
|
||||
"High Flow"
|
||||
],
|
||||
"default_print_profile": "0.40mm Standard @Xplorer 0.8",
|
||||
"deretraction_speed": [
|
||||
"120"
|
||||
],
|
||||
"extruder_colour": [
|
||||
"#FCE94F"
|
||||
],
|
||||
"extruder_offset": [
|
||||
"0x0"
|
||||
],
|
||||
"extruder_type": [
|
||||
"Direct Drive"
|
||||
],
|
||||
"extruder_variant_list": [
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]\nLOG_RESUME\nLOG_EXTR",
|
||||
"long_retractions_when_cut": [
|
||||
"0"
|
||||
],
|
||||
"machine_max_acceleration_e": [
|
||||
"6000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_extruding": [
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_retracting": [
|
||||
"5000",
|
||||
"5000"
|
||||
],
|
||||
"machine_max_acceleration_travel": [
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_x": [
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_y": [
|
||||
"5000",
|
||||
"2500"
|
||||
],
|
||||
"machine_max_acceleration_z": [
|
||||
"100",
|
||||
"50"
|
||||
],
|
||||
"machine_max_jerk_e": [
|
||||
"2.5",
|
||||
"1.25"
|
||||
],
|
||||
"machine_max_jerk_x": [
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_y": [
|
||||
"5",
|
||||
"2.5"
|
||||
],
|
||||
"machine_max_jerk_z": [
|
||||
"0.4",
|
||||
"0.2"
|
||||
],
|
||||
"machine_max_junction_deviation": [
|
||||
"0",
|
||||
"0"
|
||||
],
|
||||
"machine_max_speed_e": [
|
||||
"120",
|
||||
"60"
|
||||
],
|
||||
"machine_max_speed_x": [
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_y": [
|
||||
"300",
|
||||
"150"
|
||||
],
|
||||
"machine_max_speed_z": [
|
||||
"40",
|
||||
"20"
|
||||
],
|
||||
"machine_start_gcode": "M104 S[first_layer_temperature] T[initial_tool]\nM140 S[first_layer_bed_temperature] ; set bed temp\nM190 S[first_layer_bed_temperature] ; wait for bed temp\nG4 P10000 ; wait for temp stabilisation\nstart_print \nTool[initial_tool]\nG90\nM109 S[first_layer_temperature] T[initial_tool]\nBrush_Tool[initial_tool]\nG1 Z5.0 F3000 \nG1 X100 Y1.0 Z0.38 F5000.0 \nG1 X280 Y1.0 Z0.38 F1500.0 E15 \nG1 X280 Y1.4 Z0.38 F5000.0 \nG1 X100 Y1.4 Z0.38 F1500.0 E30\nG92 E0\nG1 Z5.0 F3000\nSKEW_PROFILE LOAD=SKEW1\n",
|
||||
"max_layer_height": [
|
||||
"0.64"
|
||||
],
|
||||
"min_layer_height": [
|
||||
"0.2"
|
||||
],
|
||||
"nozzle_diameter": [
|
||||
"0.8"
|
||||
],
|
||||
"printable_height": "401",
|
||||
"printer_extruder_id": [
|
||||
"1"
|
||||
],
|
||||
"printer_extruder_variant": [
|
||||
"Direct Drive High Flow"
|
||||
],
|
||||
"printer_model": "Xplorer Single",
|
||||
"printer_variant": "0.8",
|
||||
"retract_before_wipe": [
|
||||
"70%"
|
||||
],
|
||||
"retract_length_toolchange": [
|
||||
"2"
|
||||
],
|
||||
"retract_lift_above": [
|
||||
"0.2"
|
||||
],
|
||||
"retract_lift_below": [
|
||||
"400"
|
||||
],
|
||||
"retract_lift_enforce": [
|
||||
"All Surfaces"
|
||||
],
|
||||
"retract_restart_extra": [
|
||||
"0"
|
||||
],
|
||||
"retract_restart_extra_toolchange": [
|
||||
"0"
|
||||
],
|
||||
"retract_when_changing_layer": [
|
||||
"1"
|
||||
],
|
||||
"retraction_distances_when_cut": [
|
||||
"18"
|
||||
],
|
||||
"retraction_length": [
|
||||
"1.35"
|
||||
],
|
||||
"retraction_minimum_travel": [
|
||||
"2"
|
||||
],
|
||||
"retraction_speed": [
|
||||
"120"
|
||||
],
|
||||
"travel_slope": [
|
||||
"1"
|
||||
],
|
||||
"wipe": [
|
||||
"1"
|
||||
],
|
||||
"wipe_distance": [
|
||||
"1"
|
||||
],
|
||||
"z_hop": [
|
||||
"1"
|
||||
],
|
||||
"z_hop_types": [
|
||||
"Normal Lift"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,51 @@
|
||||
{
|
||||
"type": "machine",
|
||||
"name": "Xplorer common",
|
||||
"inherits": "fdm_klipper_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"default_filament_profile": [
|
||||
"Generic PLA @System"
|
||||
],
|
||||
"adaptive_bed_mesh_margin": "0",
|
||||
"bed_mesh_max": "99999,99999",
|
||||
"bed_mesh_min": "-99999,-99999",
|
||||
"bed_mesh_probe_distance": "50,50",
|
||||
"best_object_pos": "0.5,0.5",
|
||||
"disable_m73": "0",
|
||||
"emit_machine_limits_to_gcode": "0",
|
||||
"enable_long_retraction_when_cut": "0",
|
||||
"extruder_clearance_height_to_rod": "43",
|
||||
"extruder_clearance_radius": "70",
|
||||
"fan_kickstart": "0",
|
||||
"fan_speedup_overhangs": "1",
|
||||
"fan_speedup_time": "0",
|
||||
"head_wrap_detect_zone": [],
|
||||
"machine_end_gcode": "end_print",
|
||||
"max_resonance_avoidance_speed": "120",
|
||||
"min_resonance_avoidance_speed": "70",
|
||||
"nozzle_height": "2.5",
|
||||
"nozzle_hrc": "0",
|
||||
"nozzle_type": "hardened_steel",
|
||||
"nozzle_volume": "0",
|
||||
"pellet_modded_printer": "0",
|
||||
"preferred_orientation": "0",
|
||||
"printable_area": [
|
||||
"10x0",
|
||||
"410x0",
|
||||
"410x400",
|
||||
"10x400"
|
||||
],
|
||||
"purge_in_prime_tower": "1",
|
||||
"resonance_avoidance": "0",
|
||||
"single_extruder_multi_material": "0",
|
||||
"support_air_filtration": "1",
|
||||
"support_chamber_temp_control": "1",
|
||||
"support_multi_bed_types": "0",
|
||||
"thumbnails": "48x48/PNG, 300x300/PNG",
|
||||
"thumbnails_format": "PNG",
|
||||
"time_cost": "0",
|
||||
"use_firmware_retraction": "0",
|
||||
"use_relative_e_distances": "1",
|
||||
"z_offset": "0"
|
||||
}
|
||||
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Xplorer Dual Gantry",
|
||||
"model_id": "XplorerDualGantry",
|
||||
"nozzle_diameter": "0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Vivedino",
|
||||
"bed_model": "Xplorer_buildplate_model.stl",
|
||||
"bed_texture": "Xplorer_bed_texture_dualgantry.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
|
||||
}
|
||||
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Xplorer IDEX",
|
||||
"model_id": "XplorerIDEX",
|
||||
"nozzle_diameter": "0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Vivedino",
|
||||
"bed_model": "Xplorer_buildplate_model.stl",
|
||||
"bed_texture": "Xplorer_bed_texture_idex.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
|
||||
}
|
||||
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Xplorer IQEX",
|
||||
"model_id": "XplorerIQEX",
|
||||
"nozzle_diameter": "0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Vivedino",
|
||||
"bed_model": "Xplorer_buildplate_model.stl",
|
||||
"bed_texture": "Xplorer_bed_texture_iqex.svg",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
|
||||
}
|
||||
@@ -0,0 +1,12 @@
|
||||
{
|
||||
"type": "machine_model",
|
||||
"name": "Xplorer Single",
|
||||
"model_id": "XplorerSingle",
|
||||
"nozzle_diameter": "0.4;0.6;0.8",
|
||||
"machine_tech": "FFF",
|
||||
"family": "Vivedino",
|
||||
"bed_model": "Xplorer_buildplate_model.stl",
|
||||
"bed_texture": "",
|
||||
"hotend_model": "",
|
||||
"default_materials": "Generic ABS @System;Generic PLA @System;Generic PLA-CF @System;Generic PETG @System;Generic TPU @System;Generic ASA @System;Generic PC @System;Generic PVA @System;Generic PA @System;Generic PA-CF @System"
|
||||
}
|
||||
@@ -0,0 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.12mm Fine @Xplorer 0.4",
|
||||
"inherits": "fdm_process_xplorer_common",
|
||||
"from": "system",
|
||||
"setting_id": "9iNid6X4xIPh267R",
|
||||
"instantiation": "true",
|
||||
"bottom_shell_layers": "4",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"inner_wall_speed": "190",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"min_skirt_length": "0",
|
||||
"outer_wall_speed": "130",
|
||||
"skirt_distance": "3",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"small_perimeter_speed": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"top_shell_layers": "5",
|
||||
"top_solid_infill_flow_ratio": "0.87",
|
||||
"layer_height": "0.12",
|
||||
"compatible_printers": [
|
||||
"Xplorer Single 0.4 nozzle",
|
||||
"Xplorer IDEX 0.4 nozzle",
|
||||
"Xplorer Dual Gantry 0.4 nozzle",
|
||||
"Xplorer IQEX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.16mm Optimal @Xplorer 0.4",
|
||||
"inherits": "fdm_process_xplorer_common",
|
||||
"from": "system",
|
||||
"setting_id": "6eUjAhfHVuxRSCQr",
|
||||
"instantiation": "true",
|
||||
"bottom_shell_layers": "4",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"inner_wall_speed": "190",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"min_skirt_length": "0",
|
||||
"outer_wall_speed": "130",
|
||||
"skirt_distance": "3",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"small_perimeter_speed": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"top_shell_layers": "5",
|
||||
"top_solid_infill_flow_ratio": "0.87",
|
||||
"layer_height": "0.16",
|
||||
"compatible_printers": [
|
||||
"Xplorer Single 0.4 nozzle",
|
||||
"Xplorer IDEX 0.4 nozzle",
|
||||
"Xplorer Dual Gantry 0.4 nozzle",
|
||||
"Xplorer IQEX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,28 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.18mm Fine @Xplorer 0.6",
|
||||
"inherits": "fdm_process_xplorer_common_0_6",
|
||||
"from": "system",
|
||||
"setting_id": "tQHKzSbBNyoPQkup",
|
||||
"instantiation": "true",
|
||||
"bottom_shell_layers": "4",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"inner_wall_speed": "190",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"min_skirt_length": "0",
|
||||
"outer_wall_speed": "130",
|
||||
"skirt_distance": "3",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"small_perimeter_speed": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"top_shell_layers": "5",
|
||||
"top_solid_infill_flow_ratio": "0.87",
|
||||
"layer_height": "0.18",
|
||||
"compatible_printers": [
|
||||
"Xplorer Single 0.6 nozzle",
|
||||
"Xplorer IDEX 0.6 nozzle",
|
||||
"Xplorer Dual Gantry 0.6 nozzle",
|
||||
"Xplorer IQEX 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.20mm Standard @Xplorer 0.4",
|
||||
"inherits": "fdm_process_xplorer_common",
|
||||
"from": "system",
|
||||
"setting_id": "CiJAkwpq5pR6MfYD",
|
||||
"instantiation": "true",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"inner_wall_speed": "190",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"min_skirt_length": "10",
|
||||
"outer_wall_speed": "130",
|
||||
"skirt_loops": "2",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"small_perimeter_speed": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"top_shell_layers": "4",
|
||||
"top_solid_infill_flow_ratio": "0.87",
|
||||
"layer_height": "0.20",
|
||||
"compatible_printers": [
|
||||
"Xplorer Single 0.4 nozzle",
|
||||
"Xplorer IDEX 0.4 nozzle",
|
||||
"Xplorer Dual Gantry 0.4 nozzle",
|
||||
"Xplorer IQEX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Fine @Xplorer 0.8",
|
||||
"inherits": "fdm_process_xplorer_common_0_8",
|
||||
"from": "system",
|
||||
"setting_id": "yv9TMduh7bgD1IjO",
|
||||
"instantiation": "true",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"inner_wall_speed": "190",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"min_skirt_length": "10",
|
||||
"outer_wall_speed": "130",
|
||||
"skirt_loops": "2",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"small_perimeter_speed": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"top_shell_layers": "4",
|
||||
"top_solid_infill_flow_ratio": "0.87",
|
||||
"layer_height": "0.24",
|
||||
"compatible_printers": [
|
||||
"Xplorer Single 0.8 nozzle",
|
||||
"Xplorer IDEX 0.8 nozzle",
|
||||
"Xplorer Dual Gantry 0.8 nozzle",
|
||||
"Xplorer IQEX 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.24mm Optimal @Xplorer 0.6",
|
||||
"inherits": "fdm_process_xplorer_common_0_6",
|
||||
"from": "system",
|
||||
"setting_id": "WKjOeNEZndeHrbQw",
|
||||
"instantiation": "true",
|
||||
"initial_layer_print_height": "0.3",
|
||||
"inner_wall_speed": "190",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"min_skirt_length": "10",
|
||||
"outer_wall_speed": "130",
|
||||
"skirt_loops": "2",
|
||||
"slowdown_for_curled_perimeters": "1",
|
||||
"small_perimeter_speed": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"top_shell_layers": "4",
|
||||
"top_solid_infill_flow_ratio": "0.87",
|
||||
"layer_height": "0.24",
|
||||
"compatible_printers": [
|
||||
"Xplorer Single 0.6 nozzle",
|
||||
"Xplorer IDEX 0.6 nozzle",
|
||||
"Xplorer Dual Gantry 0.6 nozzle",
|
||||
"Xplorer IQEX 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.28mm Draft @Xplorer 0.4",
|
||||
"inherits": "fdm_process_xplorer_common",
|
||||
"from": "system",
|
||||
"setting_id": "zjvcZ59oVnh73fij",
|
||||
"instantiation": "true",
|
||||
"initial_layer_print_height": "0.32",
|
||||
"inner_wall_speed": "190",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"min_skirt_length": "0",
|
||||
"outer_wall_speed": "130",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"top_shell_layers": "4",
|
||||
"top_solid_infill_flow_ratio": "0.87",
|
||||
"layer_height": "0.28",
|
||||
"compatible_printers": [
|
||||
"Xplorer Single 0.4 nozzle",
|
||||
"Xplorer IDEX 0.4 nozzle",
|
||||
"Xplorer Dual Gantry 0.4 nozzle",
|
||||
"Xplorer IQEX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.30mm Standard @Xplorer 0.6",
|
||||
"inherits": "fdm_process_xplorer_common_0_6",
|
||||
"from": "system",
|
||||
"setting_id": "1NEAZrryKhhZNWoB",
|
||||
"instantiation": "true",
|
||||
"initial_layer_print_height": "0.32",
|
||||
"inner_wall_speed": "190",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"min_skirt_length": "0",
|
||||
"outer_wall_speed": "130",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"top_shell_layers": "4",
|
||||
"top_solid_infill_flow_ratio": "0.87",
|
||||
"layer_height": "0.30",
|
||||
"compatible_printers": [
|
||||
"Xplorer Single 0.6 nozzle",
|
||||
"Xplorer IDEX 0.6 nozzle",
|
||||
"Xplorer Dual Gantry 0.6 nozzle",
|
||||
"Xplorer IQEX 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,27 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.32mm Extra Draft @Xplorer 0.4",
|
||||
"inherits": "fdm_process_xplorer_common",
|
||||
"from": "system",
|
||||
"setting_id": "IrvXoa4zZ1b2Y5cX",
|
||||
"instantiation": "true",
|
||||
"initial_layer_print_height": "0.32",
|
||||
"inner_wall_speed": "190",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"min_skirt_length": "0",
|
||||
"outer_wall_speed": "130",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"top_shell_layers": "4",
|
||||
"top_solid_infill_flow_ratio": "0.87",
|
||||
"top_surface_line_width": "0.45",
|
||||
"layer_height": "0.32",
|
||||
"compatible_printers": [
|
||||
"Xplorer Single 0.4 nozzle",
|
||||
"Xplorer IDEX 0.4 nozzle",
|
||||
"Xplorer Dual Gantry 0.4 nozzle",
|
||||
"Xplorer IQEX 0.4 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.32mm Optimal @Xplorer 0.8",
|
||||
"inherits": "fdm_process_xplorer_common_0_8",
|
||||
"from": "system",
|
||||
"setting_id": "N3z9IBRaaeXwVLbl",
|
||||
"instantiation": "true",
|
||||
"initial_layer_print_height": "0.32",
|
||||
"inner_wall_speed": "190",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"min_skirt_length": "0",
|
||||
"outer_wall_speed": "130",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"top_shell_layers": "4",
|
||||
"top_solid_infill_flow_ratio": "0.87",
|
||||
"layer_height": "0.32",
|
||||
"compatible_printers": [
|
||||
"Xplorer Single 0.8 nozzle",
|
||||
"Xplorer IDEX 0.8 nozzle",
|
||||
"Xplorer Dual Gantry 0.8 nozzle",
|
||||
"Xplorer IQEX 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.36mm Draft @Xplorer 0.6",
|
||||
"inherits": "fdm_process_xplorer_common_0_6",
|
||||
"from": "system",
|
||||
"setting_id": "uv3jUBdJRkJ4dWVd",
|
||||
"instantiation": "true",
|
||||
"initial_layer_print_height": "0.32",
|
||||
"inner_wall_speed": "190",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"min_skirt_length": "0",
|
||||
"outer_wall_speed": "130",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"top_shell_layers": "4",
|
||||
"top_solid_infill_flow_ratio": "0.87",
|
||||
"layer_height": "0.36",
|
||||
"compatible_printers": [
|
||||
"Xplorer Single 0.6 nozzle",
|
||||
"Xplorer IDEX 0.6 nozzle",
|
||||
"Xplorer Dual Gantry 0.6 nozzle",
|
||||
"Xplorer IQEX 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.40mm Standard @Xplorer 0.8",
|
||||
"inherits": "fdm_process_xplorer_common_0_8",
|
||||
"from": "system",
|
||||
"setting_id": "ZP9WXfiKDvSAjqU2",
|
||||
"instantiation": "true",
|
||||
"initial_layer_print_height": "0.32",
|
||||
"inner_wall_speed": "190",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"min_skirt_length": "0",
|
||||
"outer_wall_speed": "130",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"top_shell_layers": "4",
|
||||
"top_solid_infill_flow_ratio": "0.87",
|
||||
"layer_height": "0.40",
|
||||
"compatible_printers": [
|
||||
"Xplorer Single 0.8 nozzle",
|
||||
"Xplorer IDEX 0.8 nozzle",
|
||||
"Xplorer Dual Gantry 0.8 nozzle",
|
||||
"Xplorer IQEX 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.42mm Extra Draft @Xplorer 0.6",
|
||||
"inherits": "fdm_process_xplorer_common_0_6",
|
||||
"from": "system",
|
||||
"setting_id": "JMbldCAibS7WnG1D",
|
||||
"instantiation": "true",
|
||||
"initial_layer_print_height": "0.32",
|
||||
"inner_wall_speed": "190",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"min_skirt_length": "0",
|
||||
"outer_wall_speed": "130",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"top_shell_layers": "4",
|
||||
"top_solid_infill_flow_ratio": "0.87",
|
||||
"layer_height": "0.42",
|
||||
"compatible_printers": [
|
||||
"Xplorer Single 0.6 nozzle",
|
||||
"Xplorer IDEX 0.6 nozzle",
|
||||
"Xplorer Dual Gantry 0.6 nozzle",
|
||||
"Xplorer IQEX 0.6 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.48mm Draft @Xplorer 0.8",
|
||||
"inherits": "fdm_process_xplorer_common_0_8",
|
||||
"from": "system",
|
||||
"setting_id": "OhseWRzfSjom4gC9",
|
||||
"instantiation": "true",
|
||||
"initial_layer_print_height": "0.32",
|
||||
"inner_wall_speed": "190",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"min_skirt_length": "0",
|
||||
"outer_wall_speed": "130",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"top_shell_layers": "4",
|
||||
"top_solid_infill_flow_ratio": "0.87",
|
||||
"layer_height": "0.48",
|
||||
"compatible_printers": [
|
||||
"Xplorer Single 0.8 nozzle",
|
||||
"Xplorer IDEX 0.8 nozzle",
|
||||
"Xplorer Dual Gantry 0.8 nozzle",
|
||||
"Xplorer IQEX 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,26 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "0.56mm Extra Draft @Xplorer 0.8",
|
||||
"inherits": "fdm_process_xplorer_common_0_8",
|
||||
"from": "system",
|
||||
"setting_id": "EXEeYQRkvcwYeLDA",
|
||||
"instantiation": "true",
|
||||
"initial_layer_print_height": "0.32",
|
||||
"inner_wall_speed": "190",
|
||||
"internal_solid_infill_acceleration": "100%",
|
||||
"min_skirt_length": "0",
|
||||
"outer_wall_speed": "130",
|
||||
"skirt_loops": "1",
|
||||
"slowdown_for_curled_perimeters": "0",
|
||||
"small_perimeter_speed": "50%",
|
||||
"sparse_infill_acceleration": "100%",
|
||||
"top_shell_layers": "4",
|
||||
"top_solid_infill_flow_ratio": "0.87",
|
||||
"layer_height": "0.56",
|
||||
"compatible_printers": [
|
||||
"Xplorer Single 0.8 nozzle",
|
||||
"Xplorer IDEX 0.8 nozzle",
|
||||
"Xplorer Dual Gantry 0.8 nozzle",
|
||||
"Xplorer IQEX 0.8 nozzle"
|
||||
]
|
||||
}
|
||||
@@ -0,0 +1,265 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_xplorer_common",
|
||||
"inherits": "fdm_process_klipper_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"accel_to_decel_enable": "1",
|
||||
"accel_to_decel_factor": "50%",
|
||||
"align_infill_direction_to_model": "0",
|
||||
"alternate_extra_wall": "0",
|
||||
"bottom_shell_thickness": "1",
|
||||
"bottom_solid_infill_flow_ratio": "1",
|
||||
"bottom_surface_density": "100%",
|
||||
"bottom_surface_pattern": "monotonicline",
|
||||
"bridge_acceleration": "1500",
|
||||
"bridge_angle": "0",
|
||||
"bridge_density": "100%",
|
||||
"bridge_flow": "1.5",
|
||||
"brim_ears_detection_length": "1",
|
||||
"brim_ears_max_angle": "125",
|
||||
"brim_type": "no_brim",
|
||||
"calib_flowrate_topinfill_special_order": "0",
|
||||
"counterbore_hole_bridging": "none",
|
||||
"default_acceleration": "5000",
|
||||
"default_jerk": "5",
|
||||
"default_junction_deviation": "0",
|
||||
"detect_narrow_internal_solid_infill": "0",
|
||||
"dont_filter_internal_bridges": "limited",
|
||||
"elefant_foot_compensation": "0.1",
|
||||
"elefant_foot_compensation_layers": "2",
|
||||
"enable_extra_bridge_layer": "disabled",
|
||||
"enable_overhang_speed": "1",
|
||||
"enable_prime_tower": "0",
|
||||
"enforce_support_layers": "0",
|
||||
"ensure_vertical_shell_thickness": "ensure_moderate",
|
||||
"extra_perimeters_on_overhangs": "1",
|
||||
"extra_solid_infills": "",
|
||||
"extrusion_rate_smoothing_external_perimeter_only": "0",
|
||||
"fill_multiline": "1",
|
||||
"filter_out_gap_fill": "2",
|
||||
"flush_into_infill": "0",
|
||||
"flush_into_objects": "0",
|
||||
"flush_into_support": "1",
|
||||
"fuzzy_skin": "none",
|
||||
"fuzzy_skin_first_layer": "0",
|
||||
"fuzzy_skin_mode": "displacement",
|
||||
"fuzzy_skin_noise_type": "classic",
|
||||
"fuzzy_skin_octaves": "4",
|
||||
"fuzzy_skin_persistence": "0.5",
|
||||
"fuzzy_skin_point_distance": "0.8",
|
||||
"fuzzy_skin_scale": "1",
|
||||
"fuzzy_skin_thickness": "0.3",
|
||||
"gap_fill_target": "nowhere",
|
||||
"gap_infill_speed": "10",
|
||||
"gcode_add_line_number": "0",
|
||||
"gcode_comments": "0",
|
||||
"gcode_label_objects": "1",
|
||||
"hole_to_polyhole": "0",
|
||||
"hole_to_polyhole_threshold": "0.01",
|
||||
"hole_to_polyhole_twisted": "1",
|
||||
"independent_support_layer_height": "1",
|
||||
"infill_anchor": "10",
|
||||
"infill_anchor_max": "10",
|
||||
"infill_combination_max_layer_height": "100%",
|
||||
"infill_jerk": "0",
|
||||
"infill_lock_depth": "1",
|
||||
"infill_overhang_angle": "60",
|
||||
"infill_shift_step": "0.4",
|
||||
"infill_wall_overlap": "20%",
|
||||
"initial_layer_acceleration": "1000",
|
||||
"initial_layer_jerk": "0",
|
||||
"initial_layer_line_width": "120%",
|
||||
"initial_layer_min_bead_width": "85%",
|
||||
"initial_layer_travel_speed": "200",
|
||||
"inner_wall_acceleration": "3000",
|
||||
"inner_wall_jerk": "0",
|
||||
"inner_wall_line_width": "110%",
|
||||
"interlocking_beam": "0",
|
||||
"interlocking_beam_layer_count": "2",
|
||||
"interlocking_beam_width": "0.8",
|
||||
"interlocking_boundary_avoidance": "2",
|
||||
"interlocking_depth": "2",
|
||||
"interlocking_orientation": "22.5",
|
||||
"internal_bridge_angle": "0",
|
||||
"internal_bridge_density": "100%",
|
||||
"internal_bridge_flow": "1.5",
|
||||
"internal_bridge_speed": "150%",
|
||||
"internal_solid_infill_line_width": "120%",
|
||||
"internal_solid_infill_pattern": "monotonicline",
|
||||
"ironing_angle": "-1",
|
||||
"ironing_inset": "0",
|
||||
"ironing_pattern": "rectilinear",
|
||||
"is_infill_first": "0",
|
||||
"lateral_lattice_angle_1": "-45",
|
||||
"lateral_lattice_angle_2": "45",
|
||||
"line_width": "110%",
|
||||
"make_overhang_printable": "0",
|
||||
"make_overhang_printable_angle": "55",
|
||||
"make_overhang_printable_hole_size": "0",
|
||||
"max_bridge_length": "10",
|
||||
"max_volumetric_extrusion_rate_slope": "0",
|
||||
"max_volumetric_extrusion_rate_slope_segment_length": "1",
|
||||
"min_bead_width": "85%",
|
||||
"min_feature_size": "25%",
|
||||
"min_length_factor": "0.5",
|
||||
"min_width_top_surface": "0",
|
||||
"mmu_segmented_region_interlocking_depth": "0",
|
||||
"mmu_segmented_region_max_width": "0",
|
||||
"notes": "",
|
||||
"only_one_wall_first_layer": "0",
|
||||
"only_one_wall_top": "1",
|
||||
"ooze_prevention": "0",
|
||||
"outer_wall_acceleration": "1000",
|
||||
"outer_wall_jerk": "0",
|
||||
"outer_wall_line_width": "100%",
|
||||
"overhang_1_4_speed": "100",
|
||||
"overhang_reverse": "0",
|
||||
"overhang_reverse_internal_only": "0",
|
||||
"overhang_reverse_threshold": "50%",
|
||||
"post_process": [],
|
||||
"precise_outer_wall": "1",
|
||||
"precise_z_height": "0",
|
||||
"preheat_steps": "1",
|
||||
"preheat_time": "10",
|
||||
"prime_tower_brim_width": "10",
|
||||
"prime_tower_width": "30",
|
||||
"prime_volume": "10",
|
||||
"print_flow_ratio": "1",
|
||||
"print_order": "default",
|
||||
"raft_contact_distance": "0.1",
|
||||
"raft_expansion": "1.5",
|
||||
"raft_first_layer_density": "90%",
|
||||
"raft_first_layer_expansion": "2",
|
||||
"reduce_crossing_wall": "1",
|
||||
"role_based_wipe_speed": "1",
|
||||
"scarf_angle_threshold": "155",
|
||||
"scarf_joint_flow_ratio": "1",
|
||||
"scarf_joint_speed": "100%",
|
||||
"scarf_overhang_threshold": "40%",
|
||||
"seam_gap": "10%",
|
||||
"seam_slope_conditional": "0",
|
||||
"seam_slope_entire_loop": "0",
|
||||
"seam_slope_inner_walls": "0",
|
||||
"seam_slope_min_length": "20",
|
||||
"seam_slope_start_height": "0",
|
||||
"seam_slope_steps": "10",
|
||||
"seam_slope_type": "none",
|
||||
"single_extruder_multi_material_priming": "0",
|
||||
"single_loop_draft_shield": "0",
|
||||
"skeleton_infill_density": "25%",
|
||||
"skeleton_infill_line_width": "100%",
|
||||
"skin_infill_density": "25%",
|
||||
"skin_infill_depth": "2",
|
||||
"skin_infill_line_width": "100%",
|
||||
"skirt_speed": "50",
|
||||
"skirt_start_angle": "-135",
|
||||
"skirt_type": "combined",
|
||||
"slice_closing_radius": "0.049",
|
||||
"slicing_mode": "regular",
|
||||
"slow_down_layers": "0",
|
||||
"small_area_infill_flow_compensation": "1",
|
||||
"small_area_infill_flow_compensation_model": [
|
||||
"0,0",
|
||||
"\n0.2,0.4444",
|
||||
"\n0.4,0.6145",
|
||||
"\n0.6,0.7059",
|
||||
"\n0.8,0.7619",
|
||||
"\n1.5,0.8571",
|
||||
"\n2,0.8889",
|
||||
"\n3,0.9231",
|
||||
"\n5,0.9520",
|
||||
"\n10,1"
|
||||
],
|
||||
"small_perimeter_threshold": "0",
|
||||
"solid_infill_direction": "45",
|
||||
"solid_infill_filament": "1",
|
||||
"solid_infill_rotate_template": "45,135",
|
||||
"sparse_infill_filament": "1",
|
||||
"sparse_infill_line_width": "110%",
|
||||
"sparse_infill_pattern": "gyroid",
|
||||
"sparse_infill_rotate_template": "",
|
||||
"spiral_finishing_flow_ratio": "0",
|
||||
"spiral_mode_max_xy_smoothing": "200%",
|
||||
"spiral_mode_smooth": "0",
|
||||
"spiral_starting_flow_ratio": "0",
|
||||
"staggered_inner_seams": "1",
|
||||
"support_angle": "0",
|
||||
"support_bottom_interface_spacing": "0.5",
|
||||
"support_bottom_z_distance": "0.2",
|
||||
"support_critical_regions_only": "0",
|
||||
"support_expansion": "0",
|
||||
"support_interface_not_for_body": "1",
|
||||
"support_interface_pattern": "auto",
|
||||
"support_ironing": "0",
|
||||
"support_ironing_flow": "10%",
|
||||
"support_ironing_pattern": "rectilinear",
|
||||
"support_ironing_spacing": "0.1",
|
||||
"support_line_width": "100%",
|
||||
"support_object_first_layer_gap": "0.2",
|
||||
"support_on_build_plate_only": "1",
|
||||
"support_remove_small_overhang": "1",
|
||||
"support_threshold_overlap": "50%",
|
||||
"support_type": "tree(auto)",
|
||||
"symmetric_infill_y_axis": "0",
|
||||
"thick_bridges": "1",
|
||||
"thick_internal_bridges": "1",
|
||||
"timelapse_type": "0",
|
||||
"top_bottom_infill_wall_overlap": "15%",
|
||||
"top_surface_acceleration": "1000",
|
||||
"top_surface_density": "100%",
|
||||
"top_surface_jerk": "0",
|
||||
"top_surface_line_width": "80%",
|
||||
"top_surface_speed": "50",
|
||||
"travel_acceleration": "5000",
|
||||
"travel_jerk": "0",
|
||||
"travel_speed": "250",
|
||||
"travel_speed_z": "0",
|
||||
"tree_support_adaptive_layer_height": "1",
|
||||
"tree_support_angle_slow": "25",
|
||||
"tree_support_auto_brim": "1",
|
||||
"tree_support_branch_angle_organic": "40",
|
||||
"tree_support_branch_diameter": "5",
|
||||
"tree_support_branch_diameter_angle": "5",
|
||||
"tree_support_branch_diameter_organic": "2",
|
||||
"tree_support_branch_distance": "5",
|
||||
"tree_support_branch_distance_organic": "1",
|
||||
"tree_support_brim_width": "3",
|
||||
"tree_support_tip_diameter": "0.8",
|
||||
"tree_support_top_rate": "30%",
|
||||
"wall_direction": "auto",
|
||||
"wall_distribution_count": "1",
|
||||
"wall_filament": "1",
|
||||
"wall_generator": "arachne",
|
||||
"wall_sequence": "inner wall/outer wall",
|
||||
"wall_transition_angle": "10",
|
||||
"wall_transition_filter_deviation": "25%",
|
||||
"wall_transition_length": "100%",
|
||||
"wipe_before_external_loop": "0",
|
||||
"wipe_on_loops": "1",
|
||||
"wipe_speed": "80%",
|
||||
"wipe_tower_bridging": "10",
|
||||
"wipe_tower_cone_angle": "10",
|
||||
"wipe_tower_extra_flow": "100%",
|
||||
"wipe_tower_extra_rib_length": "0",
|
||||
"wipe_tower_extra_spacing": "100%",
|
||||
"wipe_tower_filament": "0",
|
||||
"wipe_tower_fillet_wall": "1",
|
||||
"wipe_tower_max_purge_speed": "90",
|
||||
"wipe_tower_rib_width": "8",
|
||||
"wipe_tower_rotation_angle": "0",
|
||||
"wipe_tower_wall_type": "rectangle",
|
||||
"wiping_volumes_extruders": [
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70",
|
||||
"70"
|
||||
],
|
||||
"xy_hole_compensation": "0.05"
|
||||
}
|
||||
@@ -0,0 +1,8 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_xplorer_common_0_6",
|
||||
"inherits": "fdm_process_xplorer_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"initial_layer_print_height": "0.3"
|
||||
}
|
||||
@@ -0,0 +1,8 @@
|
||||
{
|
||||
"type": "process",
|
||||
"name": "fdm_process_xplorer_common_0_8",
|
||||
"inherits": "fdm_process_xplorer_common",
|
||||
"from": "system",
|
||||
"instantiation": "false",
|
||||
"initial_layer_print_height": "0.4"
|
||||
}
|
||||
Reference in New Issue
Block a user