Clifford GarwoodandClaude Opus 4.7 4966d0fae8 feat(imex): Span tile state for paired-gantry multicolor ...

Introduce ImexRole::Span as a 5th tile cycle state that declares "this
tool is the multicolor partner of Primary on the same gantry." Encoded
as the `S` role suffix in `imex_mode_active_tools` (e.g. `0:P,1:S,2:M,3:M`).
Disambiguates paired-gantry mc-mirror from 4-independent-copies — both
share the same active_tools shape sans the marker.

Span drives:
- Multicolor block rule: now requires Span on primary's gantry to allow
  multi-color slicing in a parallel mode. Replaces the prior "≥2 tools
  on primary's gantry" check; pre-existing 4-tool multicolor configs
  need T1 flipped to Span.
- Ghost aggregation: one ghost per non-primary gantry when Span is
  present, using the column-paired representative. Aggregated-mirror
  drag tracks primary 1:1 in X (gantries don't share an X rail) with
  X-flip baked into mesh-local frame so geometry still reads as mirrored.
- Zone aggregation: one full-X row strip per non-primary gantry instead
  of per-tool quadrants.
- UI: 5th button in IMEXModesCtrl. Cycle Off→P→C→M→S→Off, only offered
  on multi-gantry printers and only on tiles sharing primary's gantry row.

Single source of pairing truth: group_imex_active_tools_by_gantry in
IMEXHelpers, consumed by ghost factory and zone calculator.

Also fixes the carriage collision strip's X-boundary check, which lacked
the row constraint its Y-boundary counterpart already had — paired-gantry
mc-mirror was drawing a spurious right-edge strip from T3 sitting
diagonally from primary.

Co-Authored-By: Claude Opus 4.7 <noreply@anthropic.com>

2026-05-01 01:16:02 -04:00

..

Algorithm

Flatpak Crash Fix when Fuzzy skin (#12611)

2026-03-05 14:22:47 -03:00

Arachne

Add fuzzy skin painting (#9979)

2025-07-18 16:01:25 +08:00

CSGMesh

Export negative parts.

2024-10-05 21:53:16 +03:00

Execution

…

Feature

Fix fuzzy skin regresion classic wall generator (#12920)

2026-04-06 15:29:23 -03:00

Fill

fix gaps between walls and sparse infill, issue #12304 (#12770)

2026-04-24 18:36:00 +08:00

Format

Merge remote-tracking branch 'upstream/main' into feedback

2026-04-25 00:46:48 -04:00

GCode

Add Kinematics (Jerk & Accel) visualization support (#13169)

2026-04-24 14:20:47 +08:00

Geometry

Import PrusaSlicer G2/G3 arc discretization code

2025-09-24 22:49:14 -04:00

Optimize

…

Shape

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

SLA

Optimize and simplify MarchingSquares.hpp. (#10747)

2025-10-19 19:27:55 +08:00

Support

Fix support preview artifacts (missing layers) (#13310)

2026-04-23 10:20:06 -03:00

AABBMesh.cpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

AABBMesh.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

AABBTreeIndirect.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

AABBTreeLines.hpp

Detection of curled edges to enhance slowdown for overhangs algorithm (#2056)

2023-09-16 22:24:18 +08:00

AnyPtr.hpp

Merge some BS1.7 changes:

2023-08-08 19:08:13 +08:00

AppConfig.cpp

Add option to place window buttons on left side for Linux (#12831)

2026-04-24 16:51:00 +08:00

AppConfig.hpp

Fix an issue that on Windows the Bambu legacy plugin is 01.10.01.09 (#12380)

2026-02-21 00:15:48 +08:00

ArcFitter.cpp

Feature/merge 1.8.4 (#3827)

2024-01-26 20:18:10 +08:00

ArcFitter.hpp

…

Arrange.cpp

ENH: improve auto arranging of multiple single color objects

2025-09-10 10:05:07 +08:00

Arrange.hpp

Fix arrange when print-by-object and have object off-plate (#8038)

2025-01-22 10:03:21 +08:00

AStar.hpp

Feature/bs1.8beta (#2844)

2023-12-01 10:42:45 +00:00

BlacklistedLibraryCheck.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

BlacklistedLibraryCheck.hpp

…

BoundingBox.cpp

Allow specifying rotation patterns for Sparse and Solid infill (#9924)

2025-06-22 23:10:35 +08:00

BoundingBox.hpp

Allow specifying rotation patterns for Sparse and Solid infill (#9924)

2025-06-22 23:10:35 +08:00

BridgeDetector.cpp

Port "No Unsupported Perimeters" feature from SS (#3189)

2024-01-28 10:12:55 +00:00

BridgeDetector.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

Brim.cpp

Combine brims option (Prusa style brims) (#12343)

2026-04-07 22:24:46 +08:00

Brim.hpp

Remove unused legacy brim method

2024-08-22 10:13:45 +03:00

BrimEarsPoint.hpp

Fix:Retain the brim ears during model merging

2025-09-21 13:47:51 +08:00

BuildVolume.cpp

Fallback to per-move validation when bbox outside (#13179)

2026-04-20 19:18:03 -03:00

BuildVolume.hpp

Merge remote-tracking branch 'upstream/main' into libvgcode

2025-11-15 11:11:20 -05:00

calib.cpp

Calibration Cornering Jerk Test + Generic interpolator + Fix (#10962)

2025-10-26 20:44:19 +08:00

calib.hpp

Calibs: Process layer height (#11835)

2026-02-06 17:37:24 +08:00

Channel.hpp

…

Circle.cpp

…

Circle.hpp

…

Clipper2Utils.cpp

Clipper 2 multiline Infill (#11435)

2025-12-23 22:53:09 +02:00

Clipper2Utils.hpp

Clipper 2 multiline Infill (#11435)

2025-12-23 22:53:09 +02:00

Clipper2ZUtils.hpp

Re-include BBS's Clipperutils2 (#11415)

2025-11-22 15:39:12 +08:00

clipper.cpp

…

clipper.hpp

…

ClipperUtils.cpp

Upgrade clipper & improve multi-thread performance (#7177)

2025-06-18 17:50:44 +08:00

ClipperUtils.hpp

Upgrade clipper & improve multi-thread performance (#7177)

2025-06-18 17:50:44 +08:00

ClipperZUtils.hpp

Fix building errors when precompiled header support is disabled (#6879)

2024-09-23 19:26:18 +08:00

clonable_ptr.hpp

…

CMakeLists.txt

feat(imex): plate ghost renderer + per-plate filament map

2026-04-21 14:56:22 -04:00

Color.cpp

fixes compiler warnings (#9619)

2025-06-14 21:05:25 +08:00

Color.hpp

Color & shape improvements for Axes (#9495)

2025-05-08 16:00:48 +08:00

CommonDefs.hpp

ENH: support E3D print parts display

2025-10-28 15:30:00 +08:00

Config.cpp

Reduce size by Json Fromatting (#13163)

2026-04-15 22:58:12 +08:00

Config.hpp

Fix save custom machine profiles with different extruder count (#13035)

2026-04-06 10:01:58 +08:00

CustomGCode.cpp

…

CustomGCode.hpp

ENH: add load_model_objects_and_custom_gcodes

2023-09-22 16:21:26 +08:00

CutSurface.cpp

💥Fix crash svg use surface (#13262)

2026-04-23 00:21:19 +08:00

CutSurface.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

CutUtils.cpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

CutUtils.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

EdgeGrid.cpp

ENH: comment the asserts

2025-10-28 15:29:47 +08:00

EdgeGrid.hpp

💥Fix Crash with painted Line in some corrupted models (#12806)

2026-04-07 22:22:43 +08:00

ElephantFootCompensation.cpp

…

ElephantFootCompensation.hpp

…

Emboss.cpp

Avoid using auto as type of Eigen expressions. (#8577)

2025-02-26 23:07:23 +08:00

Emboss.hpp

Fix: Globally fixing the "milimeters" typo in the code (#13295)

2026-04-19 20:28:13 -03:00

EmbossShape.hpp

Various Emboss improvements from PS (#4039)

2024-02-13 23:56:48 +08:00

enum_bitmask.hpp

Porting of Pressure Equalizer feature from Prusa Slicer 2.6.x (#2161)

2023-09-27 21:44:45 +08:00

Exception.hpp

Merge some BS1.7 changes:

2023-08-08 19:08:13 +08:00

ExPolygon.cpp

Allow specifying rotation patterns for Sparse and Solid infill (#9924)

2025-06-22 23:10:35 +08:00

ExPolygon.hpp

Allow specifying rotation patterns for Sparse and Solid infill (#9924)

2025-06-22 23:10:35 +08:00

ExPolygonCollection.cpp

…

ExPolygonCollection.hpp

…

ExPolygonSerialize.hpp

Port Emboss & SVG gizmo from PrusaSlicer (#2819)

2023-12-09 22:46:18 +08:00

ExPolygonsIndex.cpp

Port Emboss & SVG gizmo from PrusaSlicer (#2819)

2023-12-09 22:46:18 +08:00

ExPolygonsIndex.hpp

Port Emboss & SVG gizmo from PrusaSlicer (#2819)

2023-12-09 22:46:18 +08:00

Extruder.cpp

Fix issues with non-bbl multi-head printers

2025-10-19 22:54:48 +08:00

Extruder.hpp

Fix issues with non-bbl multi-head printers

2025-10-19 22:54:48 +08:00

ExtrusionEntity.cpp

Remove classic overhang speed code (#9934)

2025-06-20 23:01:09 +08:00

ExtrusionEntity.hpp

Remove classic overhang speed code (#9934)

2025-06-20 23:01:09 +08:00

ExtrusionEntityCollection.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

ExtrusionEntityCollection.hpp

Toolchanger: fix an issue that wall_filament/sparse_infill_filament/solid_infill_filament didn't always work

2024-08-04 00:54:03 +08:00

ExtrusionSimulator.cpp

…

ExtrusionSimulator.hpp

…

FaceDetector.cpp

Feature/merge 1.8.4 (#3827)

2024-01-26 20:18:10 +08:00

FaceDetector.hpp

…

FilamentGroup.cpp

ENH: enhance filament group alogrithm

2025-09-17 09:46:04 +08:00

FilamentGroup.hpp

ENH: enhance filament group alogrithm

2025-09-17 09:46:04 +08:00

FilamentGroupUtils.cpp

FIX: Fix missing std::regex declaration

2025-09-18 23:01:09 +08:00

FilamentGroupUtils.hpp

ENH: enhance filament group alogrithm

2025-09-17 09:46:04 +08:00

FileParserError.hpp

…

Flow.cpp

Fix english strings consistency (#8881)

2025-04-26 19:59:49 +08:00

Flow.hpp

Allow specifying rotation patterns for Sparse and Solid infill (#9924)

2025-06-22 23:10:35 +08:00

FlushVolCalc.cpp

Relax flushing volume thresholds for printers needing higher purge. (#11778)

2026-01-05 22:41:04 +00:00

FlushVolCalc.hpp

FIX: display the minimum flush data

2025-09-29 20:38:38 +08:00

FlushVolPredictor.cpp

FIX: display the minimum flush data

2025-09-29 20:38:38 +08:00

FlushVolPredictor.hpp

FIX: display the minimum flush data

2025-09-29 20:38:38 +08:00

format.hpp

…

GCode.cpp

feat(imex): polish UI per PR feedback + add parallel-mode safeguards

2026-04-27 22:51:05 -04:00

GCode.hpp

feat(imex): plate ghost renderer + per-plate filament map

2026-04-21 14:56:22 -04:00

GCodeReader.cpp

Import PrusaSlicer G2/G3 arc discretization code

2025-09-24 22:49:14 -04:00

GCodeReader.hpp

Merge remote-tracking branch 'upstream/main' into libvgcode

2025-11-15 11:11:20 -05:00

GCodeSender.cpp

…

GCodeSender.hpp

…

GCodeWriter.cpp

feat: firmware-agnostic per-tool PA emission for IMEX parallel modes

2026-04-14 09:17:39 -04:00

GCodeWriter.hpp

feat: firmware-agnostic per-tool PA emission for IMEX parallel modes

2026-04-14 09:17:39 -04:00

Geometry.cpp

Port coordinate system selection for Move, Scale and Rotate gizmo (#9099)

2025-04-04 23:07:00 +08:00

Geometry.hpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

I18N.hpp

NEW: add boolean in export stl

2023-07-07 17:25:51 +08:00

IMEXHelpers.cpp

feat(imex): Span tile state for paired-gantry multicolor

2026-05-01 01:16:02 -04:00

IMEXHelpers.hpp

feat(imex): Span tile state for paired-gantry multicolor

2026-05-01 01:16:02 -04:00

Int128.hpp

…

IntersectionPoints.cpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

IntersectionPoints.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

JumpPointSearch.cpp

Upgrade clipper & improve multi-thread performance (#7177)

2025-06-18 17:50:44 +08:00

JumpPointSearch.hpp

Feature/bs1.8beta (#2844)

2023-12-01 10:42:45 +00:00

KDTreeIndirect.hpp

…

Layer.cpp

ENH: support recommended filament map when print by object

2025-08-24 23:18:03 +08:00

Layer.hpp

FIX: backend get the extruder id based on filament_map

2025-08-24 23:18:02 +08:00

LayerRegion.cpp

Enhancement "Only one wall on top surfaces": better support for interface_shells (#8627)

2025-03-01 22:21:59 +08:00

libslic3r_version.h.in

Better CMake Defaults (#10294)

2025-10-25 22:05:09 +08:00

libslic3r.cpp

switch res for large printer

2024-05-12 23:35:41 +08:00

libslic3r.h

Fix a bug where the maximum line width limit is inconsistent across different checks.

2025-07-30 21:22:40 +08:00

Line.cpp

Fix:path conflictcheck

2025-10-28 15:29:55 +08:00

Line.hpp

Fix:path conflictcheck

2025-10-28 15:29:55 +08:00

LocalesUtils.cpp

…

LocalesUtils.hpp

…

MacUtils.hpp

ENH:Text not centered on mac15

2025-09-18 17:08:18 +08:00

MacUtils.mm

ENH:Text not centered on mac15

2025-09-18 17:08:18 +08:00

MarchingSquares.hpp

Optimize and simplify MarchingSquares.hpp. (#10747)

2025-10-19 19:27:55 +08:00

MaterialType.cpp

Add CoPE material type (#11867)

2026-01-14 19:51:13 +08:00

MaterialType.hpp

Material Type standarization + Technical Filament Types (#10553)

2025-10-19 21:57:34 +08:00

Measure.cpp

Avoid using auto as type of Eigen expressions. (#8577)

2025-02-26 23:07:23 +08:00

Measure.hpp

Measure: Port of BBS' improved version of measure gizmo

2024-11-06 20:19:52 +08:00

MeasureUtils.hpp

Measure: Port of BBS' improved version of measure gizmo

2024-11-06 20:19:52 +08:00

MeshBoolean.cpp

CGAL Fix Model: New for Linux and Mac (#12155)

2026-04-24 16:28:28 +08:00

MeshBoolean.hpp

CGAL Fix Model: New for Linux and Mac (#12155)

2026-04-24 16:28:28 +08:00

MeshSplitImpl.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

MinAreaBoundingBox.cpp

…

MinAreaBoundingBox.hpp

…

MinimumSpanningTree.cpp

…

MinimumSpanningTree.hpp

…

miniz_extension.cpp

…

miniz_extension.hpp

…

Model.cpp

3MF Export/Import Orca export tags (#12509)

2026-04-24 14:21:44 +08:00

Model.hpp

3MF Export/Import Orca export tags (#12509)

2026-04-24 14:21:44 +08:00

ModelArrange.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

ModelArrange.hpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

MTUtils.hpp

…

MultiMaterialSegmentation.cpp

Add fuzzy skin painting (#9979)

2025-07-18 16:01:25 +08:00

MultiMaterialSegmentation.hpp

Add fuzzy skin painting (#9979)

2025-07-18 16:01:25 +08:00

MultiPoint.cpp

Allow specifying rotation patterns for Sparse and Solid infill (#9924)

2025-06-22 23:10:35 +08:00

MultiPoint.hpp

Allow specifying rotation patterns for Sparse and Solid infill (#9924)

2025-06-22 23:10:35 +08:00

MutablePolygon.cpp

…

MutablePolygon.hpp

…

MutablePriorityQueue.hpp

Feature/bs1.8beta (#2844)

2023-12-01 10:42:45 +00:00

NormalUtils.cpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

NormalUtils.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

NSVGUtils.cpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

NSVGUtils.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

ObjColorUtils.cpp

ENH:Obj import supports up to 32 colors

2025-09-18 16:10:27 +08:00

ObjColorUtils.hpp

ENH:Obj import supports up to 32 colors

2025-09-18 16:10:27 +08:00

ObjectID.cpp

…

ObjectID.hpp

Feature/merge 1.8.4 (#3827)

2024-01-26 20:18:10 +08:00

OpenVDBUtils.cpp

…

OpenVDBUtils.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

Orient.cpp

Fixes 1 Bug and 8 Compiler Warnings (#10654)

2026-02-12 08:41:35 +08:00

Orient.hpp

…

ParameterUtils.cpp

FIX: add clumping detect area parameter

2025-10-02 17:07:17 +08:00

ParameterUtils.hpp

FIX: add clumping detect area parameter

2025-10-02 17:07:17 +08:00

pchheader.cpp

…

pchheader.hpp

Merge branch 'main' into dev/step-import-dialog

2025-04-05 17:47:59 +08:00

PerimeterGenerator.cpp

Partial sacrificial bridge anchor fix (#13052)

2026-04-24 14:53:53 +08:00

PerimeterGenerator.hpp

Feature: Fuzzy Skin Extrusion Mode (#9878)

2025-07-25 15:36:18 +08:00

PlaceholderParser.cpp

GCode Macro: Fix placeholder parser bugs and enable tests (#11485)

2025-12-23 23:44:43 +08:00

PlaceholderParser.hpp

add user name placeholder (#10109)

2025-07-18 15:43:46 +08:00

Platform.cpp

…

Platform.hpp

…

PNGReadWrite.cpp

A *lot* of import fixes for flatpak (#3909)

2024-01-31 11:23:29 +00:00

PNGReadWrite.hpp

A *lot* of import fixes for flatpak (#3909)

2024-01-31 11:23:29 +00:00

Point.cpp

Avoid using auto as type of Eigen expressions. (#8577)

2025-02-26 23:07:23 +08:00

Point.hpp

ENH: debug: improve the assertion judge in Point.hpp

2025-09-17 21:49:55 +08:00

Polygon.cpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

Polygon.hpp

Upgrade clipper & improve multi-thread performance (#7177)

2025-06-18 17:50:44 +08:00

PolygonTrimmer.cpp

…

PolygonTrimmer.hpp

Upgrade clipper & improve multi-thread performance (#7177)

2025-06-18 17:50:44 +08:00

Polyline.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

Polyline.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

Preset.cpp

refactor(imex): drop unused Split mode-type infrastructure

2026-04-28 00:48:39 -04:00

Preset.hpp

Fix: generic filaments not showing on list (#13037)

2026-04-06 14:27:49 +08:00

PresetBundle.cpp

Merge remote-tracking branch 'upstream/main' into feedback

2026-04-25 00:46:48 -04:00

PresetBundle.hpp

Add wipe_tower_type printer setting to replace vendor-based wipe tower selection

2026-03-15 22:19:53 +08:00

PrincipalComponents2D.cpp

…

PrincipalComponents2D.hpp

…

Print.cpp

refactor(imex): drop unused Split mode-type infrastructure

2026-04-28 00:48:39 -04:00

Print.hpp

Add wipe_tower_type printer setting to replace vendor-based wipe tower selection

2026-03-15 22:19:53 +08:00

PrintApply.cpp

feat(imex): effective_physical_extruder_map helper + diagnostic no-filament tooltip

2026-04-21 22:51:31 -04:00

PrintBase.cpp

add user name placeholder (#10109)

2025-07-18 15:43:46 +08:00

PrintBase.hpp

ENH: refine check logic for filament mix printing

2025-09-21 13:47:58 +08:00

PrintConfig.cpp

refactor(imex): drop unused Split mode-type infrastructure

2026-04-28 00:48:39 -04:00

PrintConfig.hpp

refactor(imex): drop unused Split mode-type infrastructure

2026-04-28 00:48:39 -04:00

PrintConfigConstants.hpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

PrintObject.cpp

Feature: Ability to set flow ratio for brims (#11876)

2026-04-24 14:19:14 +08:00

PrintObjectSlice.cpp

Allow cancellation during beam interlocking generation

2026-03-13 23:33:19 +08:00

PrintRegion.cpp

Calculate extrusion width %s as a function of nozzle width, not layer height (#1578)

2023-07-27 23:37:47 +08:00

ProjectTask.cpp

A *lot* of import fixes for flatpak (#3909)

2024-01-31 11:23:29 +00:00

ProjectTask.hpp

FIX: check close chamber temperature

2025-10-28 15:29:47 +08:00

QuadricEdgeCollapse.cpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

QuadricEdgeCollapse.hpp

…

Semver.cpp

…

Semver.hpp

Fix various memory leaks

2023-11-04 11:41:03 +08:00

ShortEdgeCollapse.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

ShortEdgeCollapse.hpp

…

ShortestPath.cpp

FIX: chain_and_reorder_extrusion_entities crashes

2025-02-08 11:34:41 +08:00

ShortestPath.hpp

Upgrade clipper & improve multi-thread performance (#7177)

2025-06-18 17:50:44 +08:00

SLAPrint.cpp

ENH: CLI: add time estimation for non-cache slicing

2023-10-10 14:19:23 +08:00

SLAPrint.hpp

Port Emboss & SVG gizmo from PrusaSlicer (#2819)

2023-12-09 22:46:18 +08:00

SLAPrintSteps.cpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

SLAPrintSteps.hpp

…

SlicesToTriangleMesh.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

SlicesToTriangleMesh.hpp

…

Slicing.cpp

fix: adaptive layer height profile uses uncompensated Z height (#12080)

2026-01-26 20:04:21 -03:00

Slicing.hpp

Adaptive layers - respect layer height range modifiers. (#5941)

2024-11-21 21:40:51 +08:00

SlicingAdaptive.cpp

…

SlicingAdaptive.hpp

…

StreamUtils.hpp

Optimize and simplify MarchingSquares.hpp. (#10747)

2025-10-19 19:27:55 +08:00

Surface.cpp

…

Surface.hpp

Enhancement: Additional controls over bridges (#8263)

2025-02-12 22:10:57 +08:00

SurfaceCollection.cpp

Port "Extend sparse infill" from Prusa (#2134)

2023-09-29 23:39:12 +08:00

SurfaceCollection.hpp

Port "Extend sparse infill" from Prusa (#2134)

2023-09-29 23:39:12 +08:00

SurfaceMesh.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

SVG.cpp

A *lot* of import fixes for flatpak (#3909)

2024-01-31 11:23:29 +00:00

SVG.hpp

…

Technologies.hpp

Bugfixes (#2)

2025-11-18 19:50:48 -05:00

Tesselate.cpp

…

Tesselate.hpp

…

TextConfiguration.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

Thread.cpp

Merge some BS1.7 changes:

2023-08-08 19:08:13 +08:00

Thread.hpp

Merge some BS1.7 changes:

2023-08-08 19:08:13 +08:00

Time.cpp

try to fix flatpak

2026-01-29 19:19:37 +08:00

Time.hpp

init

2026-01-23 17:05:56 +08:00

Timer.cpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

Timer.hpp

Fix: Globally fixing the "milisecond" typo in the code (#13329)

2026-04-23 10:34:36 -03:00

TriangleMesh.cpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

TriangleMesh.hpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

TriangleMeshDeal.cpp

BBS Port: Mesh Subdivision (#12150)

2026-02-12 08:42:01 +08:00

TriangleMeshDeal.hpp

BBS Port: Mesh Subdivision (#12150)

2026-02-12 08:42:01 +08:00

TriangleMeshSlicer.cpp

Fix cut memory leak (#11476)

2025-12-18 12:37:13 +00:00

TriangleMeshSlicer.hpp

ENH: add vertical support enforcer

2025-02-08 11:34:40 +08:00

TriangleSelector.cpp

enh: Remap filament (#12016)

2026-01-26 15:21:18 +08:00

TriangleSelector.hpp

NEW: Add "change filament to"

2025-08-24 23:18:17 +08:00

TriangleSetSampling.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

TriangleSetSampling.hpp

…

TriangulateWall.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

TriangulateWall.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

Triangulation.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

Triangulation.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

TryCatchSignal.cpp

…

TryCatchSignal.hpp

…

TryCatchSignalSEH.cpp

…

TryCatchSignalSEH.hpp

…

utils.cpp

QoL: exclude handy model dir from recent list (#11934)

2026-01-13 09:40:55 +08:00

Utils.hpp

QoL: exclude handy model dir from recent list (#11934)

2026-01-13 09:40:55 +08:00

VariableWidth.cpp

ENH: fix 0 space exception when slicing

2023-10-10 14:19:23 +08:00

VariableWidth.hpp

ENH: fix another assert in wall generator

2023-07-07 17:29:08 +08:00

Zipper.cpp

…

Zipper.hpp

…