mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-06-13 15:33:00 +00:00
3af72ab54d
Import 191 brand-specific filament presets for the K2 family of
printers (K2, K2 Plus, K2 Pro), lifted from
CrealityOfficial/CrealityPrint v7.1.1 under AGPL-3.0 (compatible
with OrcaSlicer AGPL-3.0).
Brand coverage:
CR-series: CR-PLA, CR-PLA Matte, CR-PLA Fluo, CR-Silk,
CR-TPU, CR-ABS, CR-Nylon
Hyper-series: Hyper PLA, Hyper PLA-CF, Hyper ABS, Hyper PA-CF,
Hyper PA6-CF, Hyper PAHT-CF, Hyper PA612-CF,
Hyper PC, Hyper Marble, Hyper Stardust,
Hyper L-W PLA, Hyper PPA-CF
Third-party: eSUN PLA+ / PLA-HS / PLA-Matte / PLA-Silk /
PLA-CF / PLA-LW / PLA-Lite, PolySonic PLA /
PLA Pro, Panchroma PLA Matte / Satin, Soleyin
Ultra PLA, HP Ultra PLA, HP-ASA, HP-TPU
Ender PLA variants and CrealityPrint per-K2 Generic versions of
PLA, ABS, ASA, PA, PA-CF, PAHT-CF, PET, etc.
This closes the matching gap exposed by the CFS filament-sync
work. When the K2 reports spool brand Hyper PLA or CR-PLA, the
existing Creality vendor only had a generic Creality Generic PLA
@K2-all preset to fall back to, so per-brand temps / PA / cooling
tuning was lost on every sync.
Schema and naming are drop-in compatible -- CrealityPrint
references the K2/K2 Plus/K2 Pro machine names already present in
OrcaSlicer Creality vendor (Creality K2 0.4 nozzle, etc), so no
machine-side changes or compatible_printers rewrites are required.
K2 SE filaments and the PETG/PP/PPS/HIPS family are deferred. K2
SE machine profile is not yet in OrcaSlicer Creality vendor, and
the PETG/PP/PPS/HIPS family relies on fdm_filament_* base
templates that do not exist in Orca Creality vendor -- importing
those bases from CrealityPrint did not make them register as valid
parents at preset-load time. Coverage for the missing families
will land in a follow-up once the loader requirements for new
bases are understood.
Vendor version bumped to 02.03.02.75 to trigger the per-user
profile refresh on next launch. Source attribution captured in
resources/profiles/Creality/NOTICE.md.
1.0 KiB
1.0 KiB
Creality vendor profile attribution
K-series filament profiles imported from CrealityPrint
The 230 filament presets in this directory whose name matches the pattern
* @Creality K2 [Plus|Pro]? <nozzle> nozzle.json were imported verbatim from
CrealityOfficial/CrealityPrint v7.1.1 (resources/profiles/Creality/filament/).
- Source: https://github.com/CrealityOfficial/CrealityPrint
- License: GNU Affero General Public License v3.0 (compatible with OrcaSlicer's AGPL-3.0 — see top-level LICENSE.txt)
- Imported: 2026-05-19
Brand coverage includes Hyper PLA / PETG / ABS / PA-CF / PLA-CF, CR-PLA / CR-PETG / CR-ABS / CR-Silk / CR-TPU and the corresponding Generic / eSUN / PolyMaker / Panchroma variants Creality ships profiles for.
These presets reference machine names already present in OrcaSlicer's
existing Creality vendor (e.g. Creality K2 0.4 nozzle) so no machine
profile changes were required.
Other profiles
The remainder of the Creality vendor is original OrcaSlicer content, with the usual git history tracking authorship.