mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-07-15 23:12:08 +00:00
85fd613cf7
Belt printers can't slice a tall vertical temperature tower. This adds a belt-specific temperature-tower model — a row of discrete, individually engraved provini laid along the belt, each printed at one temperature via custom per-layer M104. Each provino is an inverted-L overhang that stresses print quality, so the operator reads the best temperature off overhang quality rather than a continuous ramp. It is offered as a "Test model" choice in the temperature calibration dialog (mirroring the Cornering test's selector), so users keep Joe's counter-rotated sectioned tower as "Standard" and can pick this one as "Overhang": - Calib_Params::test_model (existing field) carries the choice. - Temp_Calibration_Dlg gets a Standard/Overhang radio. - Plater::calib_temp belt branch: test_model 0 -> _calib_temp_belt_sectioned (unchanged Standard path), 1 -> the discrete-provini Overhang path. Assets: belt_temp_provino_unit.stl + belt_temp_tower_<start>_<end>.stl (6 ranges) + gen_belt_temp_tower.py (manifold engraving). Based on belt/generic-calibrations. The Overhang path is HW-validated on the IdeaFormer IR3 V2 (discrete M104 + engraved numbers); not re-validated since the rebase.