SoftFever 0051768206 Smooth out the spiral lift when arc fitting is disabled (#15118) ...

The linear approximation used a heuristic segment count clamped to 4..16, so the
lift ran as a coarse polygon. Every vertex is a direction change large enough to
hit the firmware's jerk limit, forcing a decelerate/accelerate at each corner —
the lift micro-stutters instead of running at speed. The segment count now comes
from the chord deviation against the slicing resolution, reusing
Geometry::ArcWelder::arc_discretization_steps, which keeps the turn at each
vertex shallow enough for the firmware to carry speed through the whole move.

Points are emitted through GCodeG1Formatter so they carry the same quantization
as the rest of the G-code, and the move comment now trails the feedrate line to
match _travel_to_z and the G2/G3 branch. No change when arc fitting is enabled.

2026-08-05 00:09:46 +08:00

..

Algorithm

External bridge fix (#12568)

2026-06-03 10:19:04 -03:00

Arachne

fix: prevent out-of-bounds crash in Arachne beading interpolation (#14656)

2026-07-08 20:58:39 +08:00

CSGMesh

Export negative parts.

2024-10-05 21:53:16 +03:00

Execution

…

Feature

FuzzySkin hole + Fix: Painted artifacts and with Sacrificial layer issues (#12479)

2026-05-08 19:22:49 +08:00

Fill

Feature: Smooth Factor for the Hilbert Curve sparse infill (#14969)

2026-08-01 17:58:04 -03:00

Format

fix STEP progress message percent format (#14994)

2026-07-29 10:48:01 -03:00

GCode

Fix preview speeds and time estimates after firmware retract commands (#15066)

2026-08-02 00:01:19 -03:00

Geometry

Localizations refactor (#14254)

2026-06-18 09:13:51 -03:00

Optimize

…

Shape

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

SLA

Update eigen to v5.0.1 and libigl to v2.6.0. (#11311)

2026-05-12 15:09:13 +08:00

Support

Support bugfixes (#14678)

2026-07-26 19:16:19 -03:00

AABBMesh.cpp

Update eigen to v5.0.1 and libigl to v2.6.0. (#11311)

2026-05-12 15:09:13 +08:00

AABBMesh.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

AABBTreeIndirect.hpp

Update eigen to v5.0.1 and libigl to v2.6.0. (#11311)

2026-05-12 15:09:13 +08:00

AABBTreeLines.hpp

Build Arch Fix (#15107)

2026-08-04 21:56:15 +08:00

AnyPtr.hpp

…

AppConfig.cpp

Improve dimmed layers (#15001)

2026-07-29 16:27:15 -03:00

AppConfig.hpp

ENABLE_SMOOTH_NORMALS (#14080)

2026-06-19 09:42:12 +08:00

ArcFitter.cpp

Revert changes to 'ArcFitter'

2026-03-13 02:12:10 -07:00

ArcFitter.hpp

Revert changes to 'ArcFitter'

2026-03-13 02:12:10 -07:00

Arrange.cpp

ENH: improve auto arranging of multiple single color objects

2025-09-10 10:05:07 +08:00

Arrange.hpp

Fix arrange when print-by-object and have object off-plate (#8038)

2025-01-22 10:03:21 +08:00

AStar.hpp

Feature/bs1.8beta (#2844)

2023-12-01 10:42:45 +00:00

BlacklistedLibraryCheck.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

BlacklistedLibraryCheck.hpp

…

BoundingBox.cpp

Allow specifying rotation patterns for Sparse and Solid infill (#9924)

2025-06-22 23:10:35 +08:00

BoundingBox.hpp

Fixes 4 Compiler Warnings (#10727)

2026-08-01 18:07:15 +08:00

BridgeDetector.cpp

Port "No Unsupported Perimeters" feature from SS (#3189)

2024-01-28 10:12:55 +00:00

BridgeDetector.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

Brim.cpp

Add outer-only mouse ears and align ear radius controls (#15015)

2026-08-02 10:54:16 +08:00

Brim.hpp

Fix skirt and brim handling for duplicated objects (instances) (#14683)

2026-07-18 19:57:56 -03:00

BrimEarsPoint.hpp

Fix:Retain the brim ears during model merging

2025-09-21 13:47:51 +08:00

BuildVolume.cpp

Fallback to per-move validation when bbox outside (#13179)

2026-04-20 19:18:03 -03:00

BuildVolume.hpp

Merge remote-tracking branch 'upstream/main' into libvgcode

2025-11-15 11:11:20 -05:00

calib.cpp

fix: PA pattern calibration over-retracts with absolute E distances (#14473)

2026-07-21 12:42:09 -03:00

calib.hpp

Calibrations improvements (#14759)

2026-07-27 20:11:44 -03:00

Channel.hpp

…

Circle.cpp

feat: Add Z Anti-Aliasing (ZAA) contouring support

2026-02-09 20:42:26 +01:00

Circle.hpp

feat: Add Z Anti-Aliasing (ZAA) contouring support

2026-02-09 20:42:26 +01:00

Clipper2Utils.cpp

Top Surface Expansion (#14296)

2026-07-08 14:20:40 -03:00

Clipper2Utils.hpp

Top Surface Expansion (#14296)

2026-07-08 14:20:40 -03:00

Clipper2ZUtils.hpp

Re-include BBS's Clipperutils2 (#11415)

2025-11-22 15:39:12 +08:00

clipper.cpp

…

clipper.hpp

…

ClipperUtils.cpp

Add top/bottom surface fill order control (Outward/Inward) for Concentric, Archimedean Chords and Octagram Spiral (#14179)

2026-07-14 15:34:13 -03:00

ClipperUtils.hpp

Add top/bottom surface fill order control (Outward/Inward) for Concentric, Archimedean Chords and Octagram Spiral (#14179)

2026-07-14 15:34:13 -03:00

ClipperZUtils.hpp

Fix building errors when precompiled header support is disabled (#6879)

2024-09-23 19:26:18 +08:00

clonable_ptr.hpp

…

CMakeLists.txt

Cyclic ordering (#13578)

2026-07-27 19:52:29 -03:00

Color.cpp

fixes compiler warnings (#9619)

2025-06-14 21:05:25 +08:00

Color.hpp

Color & shape improvements for Axes (#9495)

2025-05-08 16:00:48 +08:00

CommonDefs.hpp

ENH: support E3D print parts display

2025-10-28 15:30:00 +08:00

Config.cpp

feat(plugin): expose the slicing print-graph as raw orca.host classes + Twistify sample

2026-07-08 00:05:28 +08:00

Config.hpp

Fix post-slice self-invalidation on custom multi-extruder printers

2026-07-27 00:49:08 +08:00

ContourZ.cpp

ZAA: Fix Z-contouring raycast reference plane and Eigen UB (#13510)

2026-05-08 13:22:00 -03:00

CustomGCode.cpp

…

CustomGCode.hpp

…

CutSurface.cpp

💥Fix crash svg use surface (#13262)

2026-04-23 00:21:19 +08:00

CutSurface.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

CutUtils.cpp

Feature: Multiple dovetail cuts (#12318)

2026-05-18 12:57:48 +08:00

CutUtils.hpp

Feature: Multiple dovetail cuts (#12318)

2026-05-18 12:57:48 +08:00

EdgeGrid.cpp

ENH: comment the asserts

2025-10-28 15:29:47 +08:00

EdgeGrid.hpp

💥Fix Crash with painted Line in some corrupted models (#12806)

2026-04-07 22:22:43 +08:00

ElephantFootCompensation.cpp

…

ElephantFootCompensation.hpp

…

Emboss.cpp

Avoid using auto as type of Eigen expressions. (#8577)

2025-02-26 23:07:23 +08:00

Emboss.hpp

Fix: Globally fixing the "milimeters" typo in the code (#13295)

2026-04-19 20:28:13 -03:00

EmbossShape.hpp

Various Emboss improvements from PS (#4039)

2024-02-13 23:56:48 +08:00

enum_bitmask.hpp

Porting of Pressure Equalizer feature from Prusa Slicer 2.6.x (#2161)

2023-09-27 21:44:45 +08:00

Exception.hpp

…

ExPolygon.cpp

Allow specifying rotation patterns for Sparse and Solid infill (#9924)

2025-06-22 23:10:35 +08:00

ExPolygon.hpp

Various ZAA fixes.

2026-03-24 09:18:38 -07:00

ExPolygonCollection.cpp

…

ExPolygonCollection.hpp

…

ExPolygonSerialize.hpp

Port Emboss & SVG gizmo from PrusaSlicer (#2819)

2023-12-09 22:46:18 +08:00

ExPolygonsIndex.cpp

Port Emboss & SVG gizmo from PrusaSlicer (#2819)

2023-12-09 22:46:18 +08:00

ExPolygonsIndex.hpp

Port Emboss & SVG gizmo from PrusaSlicer (#2819)

2023-12-09 22:46:18 +08:00

Extruder.cpp

Feature: Retract amount after wipe (#11015)

2026-07-14 14:42:16 -03:00

Extruder.hpp

Feature: Retract amount after wipe (#11015)

2026-07-14 14:42:16 -03:00

ExtrusionEntity.cpp

Various ZAA fixes.

2026-03-24 09:18:38 -07:00

ExtrusionEntity.hpp

Feature: Small perimeters speed for supports (#13459)

2026-07-03 17:27:57 -03:00

ExtrusionEntityCollection.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

ExtrusionEntityCollection.hpp

Add Point3 return type getters for first and last point to ExtrusionEntity (#13855)

2026-05-27 22:07:15 +08:00

ExtrusionSimulator.cpp

feat: Add Z Anti-Aliasing (ZAA) contouring support

2026-02-09 20:42:26 +01:00

ExtrusionSimulator.hpp

…

FaceDetector.cpp

Feature/merge 1.8.4 (#3827)

2024-01-26 20:18:10 +08:00

FaceDetector.hpp

…

FilamentGroup.cpp

test: fix flaky k-medoids goldens added with H2C/A2L support (#14773)

2026-07-15 16:59:55 +08:00

FilamentGroup.hpp

test: fix flaky k-medoids goldens added with H2C/A2L support (#14773)

2026-07-15 16:59:55 +08:00

FilamentGroupUtils.cpp

feat(gcode): resolve per-filament variant slots per layer

2026-07-11 15:00:33 +08:00

FilamentGroupUtils.hpp

feat(libslic3r): multi-nozzle slicing engine for H2C/A2L

2026-07-09 01:16:25 +08:00

FileParserError.hpp

…

Flow.cpp

Fix punctuation, spacing and uppercasing issues (#14848)

2026-07-20 09:47:33 -03:00

Flow.hpp

Allow specifying rotation patterns for Sparse and Solid infill (#9924)

2025-06-22 23:10:35 +08:00

FlushVolCalc.cpp

Relax flushing volume thresholds for printers needing higher purge. (#11778)

2026-01-05 22:41:04 +00:00

FlushVolCalc.hpp

FIX: display the minimum flush data

2025-09-29 20:38:38 +08:00

FlushVolPredictor.cpp

FIX: display the minimum flush data

2025-09-29 20:38:38 +08:00

FlushVolPredictor.hpp

FIX: display the minimum flush data

2025-09-29 20:38:38 +08:00

format.hpp

…

GCode.cpp

Add Skip G-code config block to exclude the config comments from G-code files (#12455)

2026-08-03 15:10:01 -03:00

GCode.hpp

Fix 32-bit build in LayerResult::make_nop_layer_result (#15036)

2026-08-01 11:49:28 +08:00

GCodeReader.cpp

Import PrusaSlicer G2/G3 arc discretization code

2025-09-24 22:49:14 -04:00

GCodeReader.hpp

Merge remote-tracking branch 'upstream/main' into libvgcode

2025-11-15 11:11:20 -05:00

GCodeSender.cpp

…

GCodeSender.hpp

…

GCodeWriter.cpp

Smooth out the spiral lift when arc fitting is disabled (#15118)

2026-08-05 00:09:46 +08:00

GCodeWriter.hpp

Fix acceleration/jerk state after custom G-code (#14613)

2026-07-22 16:30:43 -03:00

Geometry.cpp

Port coordinate system selection for Move, Scale and Rotate gizmo (#9099)

2025-04-04 23:07:00 +08:00

Geometry.hpp

Fix issue that Geometry::deg2rad() do calculation in the same type as the parameter, which means if the parameter is int then you lose all the precision

2026-05-07 22:32:56 +08:00

I18N.hpp

…

Int128.hpp

feat: native Windows ARM64 build support (Snapdragon X Elite) (supersedes #14059) (#14381)

2026-06-25 22:10:49 +08:00

IntersectionPoints.cpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

IntersectionPoints.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

JumpPointSearch.cpp

Upgrade clipper & improve multi-thread performance (#7177)

2025-06-18 17:50:44 +08:00

JumpPointSearch.hpp

Feature/bs1.8beta (#2844)

2023-12-01 10:42:45 +00:00

KDTreeIndirect.hpp

…

Layer.cpp

Feature: Small perimeters speed for supports (#13459)

2026-07-03 17:27:57 -03:00

Layer.hpp

Separated Infills enhancements (#14674)

2026-07-12 11:45:00 -03:00

LayerRegion.cpp

Bridge Line Width + Improve bridge density (#11255)

2026-06-03 10:16:59 -03:00

libslic3r_version.h.in

Revert extraneous changes.

2026-03-11 17:20:12 -07:00

libslic3r.cpp

switch res for large printer

2024-05-12 23:35:41 +08:00

libslic3r.h

Fix a bug where the maximum line width limit is inconsistent across different checks.

2025-07-30 21:22:40 +08:00

Line.cpp

Fix:path conflictcheck

2025-10-28 15:29:55 +08:00

Line.hpp

Various ZAA fixes.

2026-03-24 09:18:38 -07:00

LocalesUtils.cpp

…

LocalesUtils.hpp

…

MacUtils.hpp

ENH:Text not centered on mac15

2025-09-18 17:08:18 +08:00

MacUtils.mm

ENH:Text not centered on mac15

2025-09-18 17:08:18 +08:00

MarchingSquares.hpp

Optimize and simplify MarchingSquares.hpp. (#10747)

2025-10-19 19:27:55 +08:00

MaterialType.cpp

Add CoPE material type (#11867)

2026-01-14 19:51:13 +08:00

MaterialType.hpp

Material Type standarization + Technical Filament Types (#10553)

2025-10-19 21:57:34 +08:00

Measure.cpp

Avoid using auto as type of Eigen expressions. (#8577)

2025-02-26 23:07:23 +08:00

Measure.hpp

Measure: Port of BBS' improved version of measure gizmo

2024-11-06 20:19:52 +08:00

MeasureUtils.hpp

Measure: Port of BBS' improved version of measure gizmo

2024-11-06 20:19:52 +08:00

MeshBoolean.cpp

CGAL Fix Model: New for Linux and Mac (#12155)

2026-04-24 16:28:28 +08:00

MeshBoolean.hpp

CGAL Fix Model: New for Linux and Mac (#12155)

2026-04-24 16:28:28 +08:00

MeshSplitImpl.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

MinAreaBoundingBox.cpp

…

MinAreaBoundingBox.hpp

…

MinimumSpanningTree.cpp

…

MinimumSpanningTree.hpp

…

miniz_extension.cpp

Fix garbled Chinese filenames when importing ZIP files. (#14633)

2026-07-08 20:24:55 +08:00

miniz_extension.hpp

Fix garbled Chinese filenames when importing ZIP files. (#14633)

2026-07-08 20:24:55 +08:00

Model.cpp

Separated Infills enhancements (#14674)

2026-07-12 11:45:00 -03:00

Model.hpp

Separated Infills enhancements (#14674)

2026-07-12 11:45:00 -03:00

ModelArrange.cpp

Revive the disabled fff_print test suite (#14196)

2026-06-14 17:42:53 +08:00

ModelArrange.hpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

MTUtils.hpp

…

MultiMaterialSegmentation.cpp

fix: multi-material slicing crash with line width 0 (#14455)

2026-07-22 16:49:37 -03:00

MultiMaterialSegmentation.hpp

fix: multi-material slicing crash with line width 0 (#14455)

2026-07-22 16:49:37 -03:00

MultiNozzleUtils.cpp

feat(engine): stitch per-object selector plans for sequential prints

2026-07-12 03:24:35 +08:00

MultiNozzleUtils.hpp

feat(engine): stitch per-object selector plans for sequential prints

2026-07-12 03:24:35 +08:00

MultiPoint.cpp

Fix scarf seams

2026-03-13 01:56:51 -07:00

MultiPoint.hpp

Fix scarf seams

2026-03-13 01:56:51 -07:00

MutablePolygon.cpp

Localizations refactor (#14254)

2026-06-18 09:13:51 -03:00

MutablePolygon.hpp

…

MutablePriorityQueue.hpp

Feature/bs1.8beta (#2844)

2023-12-01 10:42:45 +00:00

NormalUtils.cpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

NormalUtils.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

NSVGUtils.cpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

NSVGUtils.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

ObjColorUtils.cpp

ENH:Obj import supports up to 32 colors

2025-09-18 16:10:27 +08:00

ObjColorUtils.hpp

ENH:Obj import supports up to 32 colors

2025-09-18 16:10:27 +08:00

ObjectID.cpp

…

ObjectID.hpp

Fix skirt and brim handling for duplicated objects (instances) (#14683)

2026-07-18 19:57:56 -03:00

OpenVDBUtils.cpp

…

OpenVDBUtils.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

Orient.cpp

feat(orient): auto-orient the largest overhang toward the cooling fan

2026-07-10 16:21:48 +08:00

Orient.hpp

feat(orient): auto-orient the largest overhang toward the cooling fan

2026-07-10 16:21:48 +08:00

ParameterUtils.cpp

FIX: add clumping detect area parameter

2025-10-02 17:07:17 +08:00

ParameterUtils.hpp

FIX: add clumping detect area parameter

2025-10-02 17:07:17 +08:00

pchheader.cpp

…

pchheader.hpp

Merge branch 'main' into dev/step-import-dialog

2025-04-05 17:47:59 +08:00

PerimeterGenerator.cpp

Fix missing overhang wall when no partial counterbore bridge is generated (#15100)

2026-08-03 18:02:48 -03:00

PerimeterGenerator.hpp

ENH: Relative bridge direction + Align bridge/Ironing angles with model (#12055)

2026-06-03 10:12:26 -03:00

PlaceholderParser.cpp

fix: make the error dialog caret point at the character it's blaming (#14886)

2026-08-04 22:01:45 +08:00

PlaceholderParser.hpp

add user name placeholder (#10109)

2025-07-18 15:43:46 +08:00

Platform.cpp

feat: Python Plugins

2026-07-02 17:49:36 +08:00

Platform.hpp

feat: Python Plugins

2026-07-02 17:49:36 +08:00

PNGReadWrite.cpp

A *lot* of import fixes for flatpak (#3909)

2024-01-31 11:23:29 +00:00

PNGReadWrite.hpp

A *lot* of import fixes for flatpak (#3909)

2024-01-31 11:23:29 +00:00

Point.cpp

Fix scarf seams

2026-03-13 01:56:51 -07:00

Point.hpp

Various ZAA fixes.

2026-03-24 09:18:38 -07:00

Polygon.cpp

Fix crash ZAA (#13450)

2026-05-04 15:52:34 +08:00

Polygon.hpp

Upgrade clipper & improve multi-thread performance (#7177)

2025-06-18 17:50:44 +08:00

PolygonTrimmer.cpp

…

PolygonTrimmer.hpp

Upgrade clipper & improve multi-thread performance (#7177)

2025-06-18 17:50:44 +08:00

Polyline.cpp

Fix scarf seams

2026-03-13 01:56:51 -07:00

Polyline.hpp

Sync WipeTower from BambuStudio(through ca1881761)

2026-07-27 00:48:44 +08:00

Preset.cpp

Add Skip G-code config block to exclude the config comments from G-code files (#12455)

2026-08-03 15:10:01 -03:00

Preset.hpp

Fix plugin configuration not taking effect, and improve the plugin config UI (#14944)

2026-07-25 20:00:56 +08:00

PresetBundle.cpp

Plugin-gate the reslice check and drop non-plugin leftovers

2026-07-15 19:18:45 +08:00

PresetBundle.hpp

feat(engine): wire the per-filament volume-map producer pipeline

2026-07-11 04:38:31 +08:00

PrincipalComponents2D.cpp

…

PrincipalComponents2D.hpp

…

Print.cpp

Complete the rib wipe tower port in WipeTower2

2026-07-27 03:07:07 +08:00

Print.hpp

Fix skirt and brim handling for duplicated objects (instances) (#14683)

2026-07-18 19:57:56 -03:00

PrintApply.cpp

Fix post-slice self-invalidation on custom multi-extruder printers

2026-07-27 00:49:08 +08:00

PrintBase.cpp

feat: add {first_object_name} filename placeholder (#14497)

2026-07-03 00:14:32 +08:00

PrintBase.hpp

Fix: show all print validation warnings instead of only the last (#14112)

2026-06-18 12:45:26 +08:00

PrintConfig.cpp

Add Skip G-code config block to exclude the config comments from G-code files (#12455)

2026-08-03 15:10:01 -03:00

PrintConfig.hpp

Add Skip G-code config block to exclude the config comments from G-code files (#12455)

2026-08-03 15:10:01 -03:00

PrintConfigConstants.hpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

PrintObject.cpp

Add outer-only mouse ears and align ear radius controls (#15015)

2026-08-02 10:54:16 +08:00

PrintObjectSlice.cpp

Fix modifiers bridge speed not respected (#13971)

2026-06-01 16:00:00 +08:00

PrintRegion.cpp

Divided filament for features (#14042)

2026-06-05 20:45:43 +08:00

ProjectTask.cpp

A *lot* of import fixes for flatpak (#3909)

2024-01-31 11:23:29 +00:00

ProjectTask.hpp

X2D Support (#13388)

2026-05-10 02:21:13 +08:00

QuadricEdgeCollapse.cpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

QuadricEdgeCollapse.hpp

…

Semver.cpp

…

Semver.hpp

Fix various memory leaks

2023-11-04 11:41:03 +08:00

ShortEdgeCollapse.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

ShortEdgeCollapse.hpp

…

ShortestPath.cpp

Cyclic ordering (#13578)

2026-07-27 19:52:29 -03:00

ShortestPath.hpp

Cyclic ordering (#13578)

2026-07-27 19:52:29 -03:00

SLAPrint.cpp

Fix: show all print validation warnings instead of only the last (#14112)

2026-06-18 12:45:26 +08:00

SLAPrint.hpp

Fix: show all print validation warnings instead of only the last (#14112)

2026-06-18 12:45:26 +08:00

SLAPrintSteps.cpp

Localizations refactor (#14254)

2026-06-18 09:13:51 -03:00

SLAPrintSteps.hpp

…

SlicesToTriangleMesh.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

SlicesToTriangleMesh.hpp

…

Slicing.cpp

Fix support interface semantics, gap handling, behavior; fix bottom interface generation for organic trees; fix non organic tree interfaces (#11812)

2026-05-10 15:12:56 +08:00

Slicing.hpp

Fix support interface semantics, gap handling, behavior; fix bottom interface generation for organic trees; fix non organic tree interfaces (#11812)

2026-05-10 15:12:56 +08:00

SlicingAdaptive.cpp

…

SlicingAdaptive.hpp

…

StreamUtils.hpp

Optimize and simplify MarchingSquares.hpp. (#10747)

2025-10-19 19:27:55 +08:00

Surface.cpp

…

Surface.hpp

Enhancement: Additional controls over bridges (#8263)

2025-02-12 22:10:57 +08:00

SurfaceCollection.cpp

Port "Extend sparse infill" from Prusa (#2134)

2023-09-29 23:39:12 +08:00

SurfaceCollection.hpp

Port "Extend sparse infill" from Prusa (#2134)

2023-09-29 23:39:12 +08:00

SurfaceMesh.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

SVG.cpp

A *lot* of import fixes for flatpak (#3909)

2024-01-31 11:23:29 +00:00

SVG.hpp

…

Technologies.hpp

Define WXINSPECTOR_DISABLE globally to prevent include-order-dependent class layout (#15063)

2026-08-02 18:20:35 +08:00

Tesselate.cpp

…

Tesselate.hpp

…

TextConfiguration.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

Thread.cpp

…

Thread.hpp

fix(threads): bump worker thread stack to 16MB to survive CGAL emboss (#13772)

2026-05-21 16:24:54 +08:00

Time.cpp

try to fix flatpak

2026-01-29 19:19:37 +08:00

Time.hpp

init

2026-01-23 17:05:56 +08:00

Timer.cpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

Timer.hpp

Fix: Globally fixing the "milisecond" typo in the code (#13329)

2026-04-23 10:34:36 -03:00

TriangleMesh.cpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

TriangleMesh.hpp

Fix tests (#10906)

2025-12-08 22:42:11 +08:00

TriangleMeshDeal.cpp

Update eigen to v5.0.1 and libigl to v2.6.0. (#11311)

2026-05-12 15:09:13 +08:00

TriangleMeshDeal.hpp

BBS Port: Mesh Subdivision (#12150)

2026-02-12 08:42:01 +08:00

TriangleMeshSlicer.cpp

Refine code

2026-05-04 20:33:13 +08:00

TriangleMeshSlicer.hpp

ENH: add vertical support enforcer

2025-02-08 11:34:40 +08:00

TriangleSelector.cpp

Fix artifact during normal paint

2026-05-10 12:35:31 +08:00

TriangleSelector.hpp

Fix artifact during normal paint

2026-05-10 12:35:31 +08:00

TriangleSetSampling.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

TriangleSetSampling.hpp

…

TriangulateWall.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

TriangulateWall.hpp

Support larger printer sizes by using 64-bit.

2024-05-10 23:47:08 +08:00

Triangulation.cpp

Revert "Fix Compile Warnings (#5963)"

2024-08-12 00:00:20 +08:00

Triangulation.hpp

Removed the copyright and credits in the header of each file. This information is outdated and hard to update. Orca Slicer maintains the autoher info in git history so this is not necessary.

2024-06-15 14:56:44 +08:00

TryCatchSignal.cpp

…

TryCatchSignal.hpp

…

TryCatchSignalSEH.cpp

…

TryCatchSignalSEH.hpp

…

utils.cpp

feat(libslic3r): multi-nozzle slicing engine for H2C/A2L

2026-07-09 01:16:25 +08:00

Utils.hpp

feat(libslic3r): multi-nozzle slicing engine for H2C/A2L

2026-07-09 01:16:25 +08:00

VariableWidth.cpp

feat: Add Z Anti-Aliasing (ZAA) contouring support

2026-02-09 20:42:26 +01:00

VariableWidth.hpp

…

Zipper.cpp

…

Zipper.hpp

…