mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-05-20 20:03:47 +00:00
16727644bb
Reduce the size of current and new JSONs by standardising them with 1 tab indentation instead of 4 spaces. This effectively reduces the size by almost 20 MB. | Current | New | |---|---| | 85.2 Mib | 67 Mib | Used [JQ](https://jqlang.org/) `--tab` to automatically format every current JSON. > [!NOTE] > Some profiles had the arrays on the same line, but those created by Orca were in the standard format (each object below the previous one). In some cases, this increases the number of tabs due to the new lines, but the increase is negligible, and this way both the base profiles and those created by Orca maintain the same style.
21 lines
1.1 KiB
JSON
21 lines
1.1 KiB
JSON
{
|
||
"type": "filament",
|
||
"name": "FusRock ABS-GF @BBL A1",
|
||
"inherits": "FusRock ABS-GF @base",
|
||
"from": "system",
|
||
"setting_id": "GFSR00_01",
|
||
"instantiation": "true",
|
||
"filament_notes": "//EN\n1.Be sure to read it carefully before using (https://wiki.fusrock.com).\n2.When printing this filament, there's a risk of nozzle clogging, oozing, warping and low layer adhesion strength. To get better results, please refer to this wiki: Printing Tips for High Temp / Engineering materials（https://wiki.fusrock.com）.\\n3.Thank you for choosing FusRock. \n//CN\n1.使用前请务必仔细阅读（https://wiki.fusrock.com）。\n2.打印该耗材时，可能会出现喷嘴堵塞、拉丝、翘边以及层间附着力不足等问题。为了获得更好的打印效果，请参考此维基页面：高温 / 工程材料打印技巧（https://wiki.fusrock.com）。\n3.感谢您选择FusRock。",
|
||
"filament_long_retractions_when_cut": [
|
||
"1"
|
||
],
|
||
"filament_retraction_distances_when_cut": [
|
||
"18"
|
||
],
|
||
"compatible_printers": [
|
||
"Bambu Lab A1 0.4 nozzle",
|
||
"Bambu Lab A1 0.6 nozzle",
|
||
"Bambu Lab A1 0.8 nozzle"
|
||
]
|
||
}
|