mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-07-16 15:32:09 +00:00
8cb2e4e01e
* profiles: enforce globally-unique, per-vendor-namespaced setting_id Many non-Bambu vendors copied Bambu's generic setting_ids (GFSA04 alone appeared in 1557 files), so setting_id was not globally unique. This namespaces every vendor's ids and reserves Bambu/OrcaFilamentLibrary space. - Reserve "G*" (Bambu) and "O*" (OrcaFilamentLibrary) id spaces. - Assign each other vendor a 2-char prefix (first+last letter, collision resolved) and renumber every instantiated preset to <PREFIX><NNNN>. - Strip setting_id from base profiles (instantiation:false) per Bambu's convention; assign one to instantiated presets that lacked it. - Remove the pre-existing misspelled "settings_id" key (91 files). - filament_id is left untouched (it is a per-material id). - Add one-time migration script scripts/assign_vendor_setting_ids.py with a persisted registry resources/profiles/vendor_prefixes.json. Re-runs freeze existing ids; only new vendors/profiles get new ids. - Bump version in each changed vendor index file. - Extend scripts/orca_extra_profile_check.py with a CI guard: global uniqueness, in-namespace, no base setting_id, no gaps, no settings_id typo. 7425 profile files changed across 61 vendors; 0 cross-vendor collisions; validator clean; migration idempotent. BBL and OrcaFilamentLibrary id spaces untouched. * profiles: add setting_id authoring guide for new vendors / profiles * profiles: drop in-repo README; setting_id guide now lives in the wiki * profiles: derive setting_id deterministically from vendor/type/name * bump profile version
71 lines
1.5 KiB
JSON
71 lines
1.5 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Elegoo PAHT-CF @System",
|
|
"inherits": "Elegoo PAHT @base",
|
|
"from": "system",
|
|
"setting_id": "S073oXCeOlTEqh6L",
|
|
"instantiation": "true",
|
|
"renamed_from": "Elegoo PAHT-CF",
|
|
"close_fan_the_first_x_layers": [
|
|
"3"
|
|
],
|
|
"fan_cooling_layer_time": [
|
|
"5"
|
|
],
|
|
"fan_max_speed": [
|
|
"30"
|
|
],
|
|
"fan_min_speed": [
|
|
"10"
|
|
],
|
|
"filament_flow_ratio": [
|
|
"0.96"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"6"
|
|
],
|
|
"nozzle_temperature": [
|
|
"290"
|
|
],
|
|
"nozzle_temperature_initial_layer": [
|
|
"290"
|
|
],
|
|
"nozzle_temperature_range_high": [
|
|
"290"
|
|
],
|
|
"nozzle_temperature_range_low": [
|
|
"260"
|
|
],
|
|
"overhang_fan_speed": [
|
|
"40"
|
|
],
|
|
"overhang_fan_threshold": [
|
|
"0%"
|
|
],
|
|
"reduce_fan_stop_start_freq": [
|
|
"0"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"2"
|
|
],
|
|
"slow_down_min_speed": [
|
|
"10"
|
|
],
|
|
"textured_plate_temp": [
|
|
"100"
|
|
],
|
|
"textured_plate_temp_initial_layer": [
|
|
"100"
|
|
],
|
|
"pressure_advance": [
|
|
"0.052"
|
|
],
|
|
"enable_pressure_advance": [
|
|
"1"
|
|
],
|
|
"filament_start_gcode": [
|
|
"; filament start gcode\n{if (bed_temperature[current_extruder] >55)||(bed_temperature_initial_layer[current_extruder] >55)}M106 P3 S200\n{elsif(bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S150\n{elsif(bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S50\n{endif}\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
|
|
],
|
|
"compatible_printers": []
|
|
}
|