mirror of
https://github.com/OrcaSlicer/OrcaSlicer.git
synced 2026-09-15 04:57:34 +00:00
095fd9fba4
Phase 2 of the filament_id cleanup (31 collision groups, all one mechanism: material-class ids on shared fdm_filament_* templates collapsing HF/-CF/ Prusament lines onto one id, plus 3 overclaims). 18 new @base family roots (owner generic keeps the legacy id, 12 impostor families get deterministic mints), 72 config-neutral inherits repoints, 6 template filament_id keys removed (only where every id-less inheritor is covered by a new root; fdm_filament_asa/pc keep theirs for the frozen Prusament @XL riders), 3 compatible_printers trims on MINIIS printers covered by dedicated @MINIIS variants. Frozen name-shaped and _NN per-variant ids stay byte-identical. Verified: config-equivalence gate zero unexpected diffs; extra check exit 0; --check exit 0; validator -l 2 exit 0; extended -f -v Prusa exit 0 (was 31 groups / 1035 printer-level errors on the pre-apply copy).
57 lines
1.8 KiB
JSON
57 lines
1.8 KiB
JSON
{
|
|
"type": "filament",
|
|
"name": "Prusament rPLA @XL",
|
|
"inherits": "Prusament rPLA @base",
|
|
"from": "system",
|
|
"setting_id": "j2BSXHFa7D3Gze7C",
|
|
"instantiation": "true",
|
|
"nozzle_temperature_intial_layer": "205",
|
|
"nozzle_temperature": "205",
|
|
"hot_plate_temp_initial_layer": "60",
|
|
"hot_plate_temp": "60",
|
|
"full_fan_speed_layer": "3",
|
|
"slow_down_min_speed": "15",
|
|
"filament_flow_ratio": [
|
|
"1"
|
|
],
|
|
"close_fan_the_first_x_layers": [
|
|
"1"
|
|
],
|
|
"slow_down_layer_time": [
|
|
"10"
|
|
],
|
|
"fan_max_speed": [
|
|
"100"
|
|
],
|
|
"fan_min_speed": [
|
|
"100"
|
|
],
|
|
"overhang_fan_speed": [
|
|
"100"
|
|
],
|
|
"filament_max_volumetric_speed": [
|
|
"10"
|
|
],
|
|
"filament_loading_speed_start": "50",
|
|
"filament_loading_speed": "10",
|
|
"filament_unloading_speed_start": "100",
|
|
"filament_unloading_speed": "100",
|
|
"filament_load_time": "10.5",
|
|
"filament_unload_time": "8.5",
|
|
"filament_cooling_moves": "2",
|
|
"filament_cooling_initial_speed": "10",
|
|
"filament_cooling_final_speed": "3.5",
|
|
"filament_retract_lift_below": "0.6",
|
|
"filament_start_gcode": [
|
|
"; filament start gcode\nM900 K{if nozzle_diameter[0]==0.4}0.05{elsif nozzle_diameter[0]==0.25}0.14{elsif nozzle_diameter[0]==0.3}0.07{elsif nozzle_diameter[0]==0.35}0.06{elsif nozzle_diameter[0]==0.6}0.03{elsif nozzle_diameter[0]==0.5}0.035{elsif nozzle_diameter[0]==0.8}0.015{else}0{endif} ; Filament gcode\n\n{if printer_notes=~/.*PRINTER_MODEL_XLIS.*/}\nM572 S{if nozzle_diameter[0]==0.4}0.036{elsif nozzle_diameter[0]==0.5}0.025{elsif nozzle_diameter[0]==0.6}0.02{elsif nozzle_diameter[0]==0.8}0.014{elsif nozzle_diameter[0]==0.25}0.12{elsif nozzle_diameter[0]==0.3}0.08{else}0{endif} ; Filament gcode\n{endif}\n\nM142 S36 ; set heatbreak target temp"
|
|
],
|
|
"compatible_printers": [
|
|
"Prusa XL 0.25 nozzle",
|
|
"Prusa XL 0.3 nozzle",
|
|
"Prusa XL 0.4 nozzle",
|
|
"Prusa XL 0.5 nozzle",
|
|
"Prusa XL 0.6 nozzle",
|
|
"Prusa XL 0.8 nozzle"
|
|
]
|
|
}
|