Fix an issue: was not able to switch language

.clang-format

@@ -1,120 +0,0 @@
-#
-# http://clang.llvm.org/docs/ClangFormatStyleOptions.html
-#
-Language:        Cpp
-AccessModifierOffset: -4
-AlignAfterOpenBracket: Align
-AlignConsecutiveAssignments: true
-AlignConsecutiveDeclarations: true
-AlignEscapedNewlines: DontAlign
-AlignOperands:   true
-AlignTrailingComments: true
-AllowAllParametersOfDeclarationOnNextLine: true
-AllowShortBlocksOnASingleLine: true
-AllowShortCaseLabelsOnASingleLine: true
-AllowShortFunctionsOnASingleLine: All
-AllowShortIfStatementsOnASingleLine: false
-AllowShortLoopsOnASingleLine: false
-AlwaysBreakAfterDefinitionReturnType: None
-AlwaysBreakAfterReturnType: None
-AlwaysBreakBeforeMultilineStrings: false
-AlwaysBreakTemplateDeclarations: false
-BinPackArguments: true
-BinPackParameters: false
-BraceWrapping:   
-  AfterClass:      true
-  AfterControlStatement: false
-  AfterEnum:       false
-  AfterFunction:   true
-  AfterNamespace:  false
-  AfterObjCDeclaration: false
-  AfterStruct:     true
-  AfterUnion:      false
-  AfterExternBlock: false
-  BeforeCatch:     false
-  BeforeElse:      false
-  IndentBraces:    false
-  SplitEmptyFunction: false
-  SplitEmptyRecord: false
-  SplitEmptyNamespace: false
-BreakBeforeBinaryOperators: None
-BreakBeforeBraces: Custom
-BreakBeforeInheritanceComma: false
-BreakInheritanceList: BeforeColon
-BreakBeforeTernaryOperators: false
-BreakConstructorInitializersBeforeComma: false
-BreakConstructorInitializers: BeforeComma
-BreakAfterJavaFieldAnnotations: false
-BreakStringLiterals: true
-ColumnLimit:     140
-CommentPragmas:  '^ IWYU pragma:'
-CompactNamespaces: true
-ConstructorInitializerAllOnOneLineOrOnePerLine: true
-ConstructorInitializerIndentWidth: 4
-ContinuationIndentWidth: 4
-Cpp11BracedListStyle: true
-DerivePointerAlignment: false
-DisableFormat:   false
-ExperimentalAutoDetectBinPacking: false
-FixNamespaceComments: true
-ForEachMacros:   
-  - forever
-  - foreach
-  - Q_FOREACH
-  - BOOST_FOREACH
-IncludeBlocks:   Preserve
-IncludeCategories: 
-  - Regex:           '^<Q.*'
-    Priority:        200
-  - Regex:           '^(<|"(gtest|gmock|isl|json)/)'
-    Priority:        3
-  - Regex:           '.*'
-    Priority:        1
-IncludeIsMainRegex: '(Test)?$'
-IndentCaseLabels: false
-IndentPPDirectives: None
-IndentWidth:     4
-IndentWrappedFunctionNames: false
-JavaScriptQuotes: Leave
-JavaScriptWrapImports: true
-#KeepLineBreaksForNonEmptyLines: false
-KeepEmptyLinesAtTheStartOfBlocks: false
-MacroBlockBegin: ''
-MacroBlockEnd:   ''
-MaxEmptyLinesToKeep: 1
-NamespaceIndentation: None
-ObjCBinPackProtocolList: Auto
-ObjCBlockIndentWidth: 4
-ObjCSpaceAfterProperty: false
-ObjCSpaceBeforeProtocolList: true
-PenaltyBreakAssignment: 150
-PenaltyBreakBeforeFirstCallParameter: 300
-PenaltyBreakComment: 500
-PenaltyBreakFirstLessLess: 400
-PenaltyBreakString: 600
-PenaltyBreakTemplateDeclaration: 10
-PenaltyExcessCharacter: 50
-PenaltyReturnTypeOnItsOwnLine: 300
-PointerAlignment: Left
-ReflowComments:  true
-SortIncludes:    false
-SortUsingDeclarations: false
-SpaceAfterCStyleCast: true
-SpaceAfterTemplateKeyword: false
-SpaceBeforeAssignmentOperators: true
-SpaceBeforeCpp11BracedList: false
-SpaceBeforeCtorInitializerColon: true
-SpaceBeforeInheritanceColon: true
-SpaceBeforeParens: ControlStatements
-SpaceBeforeRangeBasedForLoopColon: true
-SpaceInEmptyParentheses: false
-SpacesBeforeTrailingComments: 1
-SpacesInAngles:  false
-SpacesInContainerLiterals: false
-SpacesInCStyleCastParentheses: false
-SpacesInParentheses: false
-SpacesInSquareBrackets: false
-Standard:        Cpp11
-TabWidth:        4
-UseTab:          Never
-

.cursorignore

@@ -1,10 +0,0 @@
-# Add directories or file patterns to ignore during indexing (e.g. foo/ or *.csv)
-deps/
-build_*/
-build/
-localization/
-sandboxes/
-resources/*
-!resources/web/
-!resources/dailytip
-!resources/shaders

.devcontainer/Dockerfile

@@ -1,2 +0,0 @@
-ARG BASE_IMAGE
-FROM ${BASE_IMAGE}

.devcontainer/devcontainer.json

@@ -1,51 +0,0 @@
-{
-	"name": "OrcaSlicer",
-	"build": {
-		"dockerfile": "Dockerfile",
-			"args": {
-				"PLATFORM": "linux/amd64",
-				"BASE_IMAGE": "mcr.microsoft.com/devcontainers/cpp:ubuntu-22.04"
-			},
-			"options": ["--platform=linux/amd64"]
-	},
-	"runArgs": ["--platform=linux/amd64"],
-    "features": {
-        "ghcr.io/devcontainers/features/desktop-lite:1": {
-			"password": "orca"
-		}
-    },
-	"customizations": {
-		"vscode": {
-			"settings": {
-				"cmake.configureArgs": [
-					"-DSLIC3R_GTK=3",
-					"-DBBL_RELEASE_TO_PUBLIC=1",
-					"-DBBL_INTERNAL_TESTING=0",
-					"-DSLIC3R_STATIC=1",
-					"-DCMAKE_PREFIX_PATH=${workspaceFolder}/deps/build/destdir/usr/local"
-				]
-			},
-			
-			// Add the IDs of extensions you want installed when the container is created.
-			"extensions": [
-				"ms-vscode.cmake-tools",
-				"ms-vscode.cpptools-extension-pack"
-			]
-		}
-	},
-	
-    "forwardPorts": [6080],
-	"portsAttributes": {
-		"6080": {
-			"label": "VNC web client (noVNC)",
-			"onAutoForward": "silent"
-		}
-    },
-	"otherPortsAttributes": {
-		"onAutoForward": "ignore"
-	},
-	"onCreateCommand": {
-		"Set postCreate executable flag": "chmod +x .devcontainer/postCreate.sh"
-	},
-	"postCreateCommand": "sudo .devcontainer/postCreate.sh"
-}

.devcontainer/postCreate.sh

@@ -1,15 +0,0 @@
-#!/bin/bash
-# Update and upgrade all system packages
-apt update
-apt upgrade -y          
-
-build_linux="./build_linux.sh -u"
-echo "-----------------------------------------"	
-echo "Running ${build_linux}..."
-echo "-----------------------------------------"	
-${build_linux}
-
-echo "------------------------------"
-echo "Installing missing packages..."
-echo "------------------------------"
-apt install -y libgl1-mesa-dev m4 autoconf libtool

.dockerignore

@@ -1,30 +0,0 @@
-Build
-Build.bat
-/build/
-deps/build
-MYMETA.json
-MYMETA.yml
-_build
-blib
-xs/buildtmp
-*.o
-*.log
-MANIFEST.bak
-xs/MANIFEST.bak
-xs/assertlib*
-.init_bundle.ini
-.vs/*
-local-lib
-/src/TAGS
-/.vscode/
-build-linux/*
-deps/build-linux/*
-**/.DS_Store
-install_*
-build_*/
-!build_linux.sh
-SVG
-scripts/Dockerfile
-scripts/DockerBuild.sh
-scripts/DockerRun.sh
-scripts/.dockerignore

.gitattributes

@@ -1,2 +0,0 @@
-# Set the default behavior, in case people don't have core.autocrlf set.
-* text=auto

.github/FUNDING.yml

@@ -1,3 +0,0 @@
-github: SoftFever
-ko_fi: SoftFever
-custom: https://paypal.me/softfever3d

.github/ISSUE_TEMPLATE/bug_report.yml

@@ -1,133 +0,0 @@
-name: 🐞 Bug Report
-description: File a bug report
-labels: ["bug"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        **Thank you for using Orca Slicer and wanting to report a bug.**
-        
-        Please note that this is not the place to make feature requests or ask for help.
-        For this, please use the [Feature request](https://github.com/SoftFever/OrcaSlicer/issues/new?assignees=&labels=&projects=&template=feature_request.yml) issue type or you can discuss your idea on our [Discord server](https://discord.gg/P4VE9UY9gJ) with others.
-        
-        Before filing, please check if the issue already exists (either open or closed) by using the search bar on the issues page. If it does, comment there. Even if it's closed, we can reopen it based on your comment.
-  - type: checkboxes
-    attributes:
-      label: Is there an existing issue for this problem?
-      description: Please search to see if an issue already exists for the bug you encountered.
-      options:
-        - label: I have searched the existing issues
-          required: true
-  - type: input
-    id: version
-    attributes:
-      label: OrcaSlicer Version
-      description: Which version of Orca Slicer are you running? You can see the full version in `Help` -> `About Orca Slicer`.
-      placeholder: e.g. 1.9.0
-    validations:
-      required: true
-  - type: dropdown
-    id: os_type
-    attributes:
-      label: "Operating System (OS)"
-      description: "What OSes are you are experiencing issues on?"
-      multiple: true
-      options:
-        - Linux
-        - macOS
-        - Windows
-    validations:
-      required: true
-  - type: input
-    id: os_version
-    attributes:
-      label: "OS Version"
-      description: "What OS version does this relate to?"
-      placeholder: "i.e. OS: Windows 7/8/10/11 ..., Ubuntu 22.04/Fedora 36 ..., macOS 10.15/11.1/12.3 ..."
-    validations:
-      required: true
-  - type: textarea
-    id: system_info
-    attributes:
-      label: Additional system information
-      description: For the performance issue, please also show the CPU, Memory information; For the 3D Rendering issue, please also show the Display Card information.
-      placeholder: |
-        CPU: 11th gen Intel r core tm i7-1185g7/AMD Ryzen 7 6800h/...
-        Memory: 32/16 GB...
-        Display Card: NVIDIA Quadro P400/...
-    validations:
-      required: false
-  - type: input
-    id: printer
-    attributes:
-      label: Printer
-      description: Which printer was selected
-      placeholder: Voron 2.4/VzBot/Prusa MK4/Bambu Lab X1 series/Bambu Lab P1P/...
-    validations:
-      required: true
-  - type: textarea
-    id: reproduce_steps
-    attributes:
-      label: How to reproduce
-      description: Please described the detailed steps to reproduce this issue
-      placeholder: |
-        1. Go to '...'
-        2. Click on '...'
-        3. Scroll down to '...'
-        4. See error
-    validations:
-      required: true
-  - type: textarea
-    id: actual_results
-    attributes:
-      label: Actual results
-      description: What happens after the above steps? Please, enclose a screenshot whenever possible (even when you think the description is clear). 
-    validations:
-      required: true
-  - type: textarea
-    id: expected_results
-    attributes:
-      label: Expected results
-      description: What should happen after the above steps?
-    validations:
-      required: true
-  - type: markdown
-    id: file_required
-    attributes:
-      value: |
-        Please be sure to add the following files:
-          * Please upload a ZIP archive containing the **project file** used when the problem arise. Please export it just before or after the problem occurs. Even if you did nothing and/or there is no object, export it! (We need the configurations in project file).
-            You can export the project file from the application menu in `File`->`Save project as...`, then zip it
-          * A **log file** for crashes and similar issues.
-            You can find your log file here:
-            Windows: `%APPDATA%\OrcaSlicer\log` or usually `C:\Users\<your username>\AppData\Roaming\OrcaSlicer\log`
-            MacOS: `$HOME/Library/Application Support/OrcaSlicer/log`
-            Linux: `$HOME/.config/OrcaSlicer/log`
-            If Orca Slicer still starts, you can also reach this directory from the application menu in `Help` -> `Show Configuration Folder`
-            You can zip the log directory, or just select the newest logs when this issue happens, and zip them
-  - type: textarea
-    id: file_uploads
-    attributes:
-      label: Project file & Debug log uploads
-      description:  Drop the project file and debug log here
-      placeholder: |
-        Project File: `File` -> `Save project as...` then zip it & drop it here
-        Log File:  `Help` -> `Show Configuration Folder`, then zip the log directory, or just select the newest logs in `log` when this issue happens and zip them, then drop the zip file here
-    validations:
-      required: true
-  - type: checkboxes
-    id: file_checklist
-    attributes:
-      label: Checklist of files to include
-      options:
-        - label: Log file
-        - label: Project file
-  - type: textarea
-    attributes:
-      label: Anything else?
-      description: |
-        Screenshots? References? Anything that will give us more context about the issue you are encountering!
-
-        Tip: You can attach images or log files by clicking this area to highlight it and then dragging files in.
-    validations:
-      required: false

.github/ISSUE_TEMPLATE/config.yml

@@ -1,8 +0,0 @@
-blank_issues_enabled: false
-contact_links:
-  - name: Community Support (Discord channel)
-    url: https://discord.gg/P4VE9UY9gJ
-    about: Please ask and answer support "how do I?"questions here.
-  - name: Discussion Forum
-    url: https://github.com/SoftFever/OrcaSlicer/discussions
-    about: Please raise ideas and feature suggestions here.

.github/ISSUE_TEMPLATE/feature_request.yml

@@ -1,66 +0,0 @@
-name: 🚀 Feature Request / Enhancement
-description: Suggest an improvement to make Orca Slicer even better!
-labels: ["enhancement"]
-body:
-  - type: markdown
-    attributes:
-      value: |
-        Thanks for taking the time to fill out this feature request!
-
-        If your idea is still at the formulation stage, or you're not sure it would
-        be useful to many users, you can raise it as a discussion topic under [Ideas](https://github.com/SoftFever/OrcaSlicer/discussions/categories/ideas)
-        or you can raise it on the [Discord server](https://discord.gg/P4VE9UY9gJ).
-  - type: checkboxes
-    attributes:
-      label: Is there an existing issue for this feature request?
-      description: |
-        Please search to see if an issue already exists for a feature, or perhaps one similar.
-        You can then comment and react so that we know know much interest there is in the feature request.
-      options:
-        - label: I have searched the existing issues
-          required: true
-  - type: textarea
-    attributes:
-      label: Is your feature request related to a problem?
-      description: A clear and concise description of what the problem is.
-      placeholder: I'm always frustrated when [...]
-    validations:
-      required: true
-  - type: dropdown
-    attributes:
-      label: Which printers will be beneficial to this feature?
-      description: Select affected printer firmware type.
-      multiple: true
-      options: 
-        - Klipper
-        - Marlin
-        - Others
-        - All
-    validations:
-      required: true
-  - type: textarea
-    attributes:
-      label: Describe the solution you'd like
-      description: A clear and concise description of what you want to happen.
-      placeholder: It should do [...]
-    validations:
-      required: true
-  - type: textarea
-    attributes:
-      label: Describe alternatives you've considered
-      description: A clear and concise description of any alternative solutions or features you've considered.
-      placeholder: |
-        1. [...]
-        2. [...]
-        3. [...]
-    validations:
-      required: false
-  - type: textarea
-    attributes:
-      label: Additional context
-      description: |
-        Add any other context, diagrams, illustations or screenshots about the feature request here.
-
-        Tip: You can attach images or log files by clicking this area to highlight it and then dragging files in.
-    validations:
-      required: false

.github/dependabot.yml

@@ -1,18 +0,0 @@
-version: 2
-updates:
-  # Only care about major updates to github actions
-  - package-ecosystem: "github-actions"
-    directory: "/"
-    schedule:
-      interval: "monthly"
-    ignore: # Only suggest major updates for built-in actions
-      - dependency-name: "github/*"
-        update-types: ["version-update:semver-patch", "version-update:semver-minor"]
-      - dependency-name: "actions/*"
-        update-types: ["version-update:semver-patch", "version-update:semver-minor"]
-  # Docker dependencies
-  - package-ecosystem: "docker"
-    directory: "/"
-    schedule:
-      interval: "monthly"
-  # no support for c/cpp

.github/pull_request_template.md

@@ -1,21 +0,0 @@
-# Description
-
-<!--
-> Please provide a summary of the changes made in this PR. Include details such as:
-  > * What issue does this PR address or fix?
-  > * What new features or enhancements does this PR introduce?
-  > * Are there any breaking changes or dependencies that need to be considered?
--->
-
-# Screenshots/Recordings/Graphs
-
-<!--
-> Please attach relevant screenshots to showcase the UI changes.
-> Please attach images that can help explain the changes.
--->
-
-## Tests
-
-<!--
-> Please describe the tests that you have conducted to verify the changes made in this PR.
--->

.github/workflows/assign.yml

@@ -1,24 +0,0 @@
-name: Assign Issue
-
-on:
-  schedule:
-    - cron: 0 0 * * *
-  issue_comment:
-    types: [created]
-  workflow_dispatch:
-
-jobs:
-  assign:
-    permissions:
-      issues: write
-    runs-on: ubuntu-latest
-    steps:
-      - name: Assign the user or unassign stale assignments
-        uses: takanome-dev/assign-issue-action@v2.3
-        with:
-          github_token: ${{ secrets.GITHUB_TOKEN }}
-          maintainers: 'noisyfox,softfever'
-          days_until_unassign: 30
-          block_assignment: false
-          reminder_days: 7
-          max_assignments: 12

.github/workflows/build_all.yml

@@ -1,124 +0,0 @@
-name: Build all
-
-on:
-  push:
-    branches:
-     - main
-     - release/*
-    paths:
-     - 'deps/**'
-     - 'src/**'
-     - '**/CMakeLists.txt'
-     - 'version.inc'
-     - 'localization/**'
-     - 'resources/**'
-     - ".github/workflows/build_*.yml"
-     - 'scripts/flatpak/**'
-
-  pull_request:
-    branches:
-     - main
-     - release/*
-    paths:
-     - 'deps/**'
-     - 'src/**'
-     - '**/CMakeLists.txt'
-     - 'version.inc'
-     - ".github/workflows/build_*.yml"
-     - 'build_linux.sh'
-     - 'build_release_vs2022.bat'
-     - 'build_release_macos.sh'
-     - 'scripts/flatpak/**'
-
-  workflow_dispatch: # allows for manual dispatch
-    inputs:
-      build-deps-only:
-        description: 'Only build dependencies (bypasses caching)'
-        type: boolean
-        default: false
-
-concurrency:
-  group: ${{ github.workflow }}-${{ github.event.pull_request.number || github.ref }}
-  cancel-in-progress: true
-  
-
-jobs:
-  build_all:
-    name: Build All
-    strategy:
-      fail-fast: false
-      matrix:
-        include:
-          # Deprecate 20.04appimage
-          # - os: ubuntu-20.04
-          - os: ubuntu-24.04
-          - os: windows-latest
-          - os: macos-14
-            arch: arm64
-    uses: ./.github/workflows/build_check_cache.yml
-    with:
-      os: ${{ matrix.os }}
-      arch: ${{ matrix.arch }}
-      build-deps-only: ${{ inputs.build-deps-only || false }}
-    secrets: inherit
-  flatpak:
-    name: "Flatpak"
-    container:
-      image: ghcr.io/flathub-infra/flatpak-github-actions:gnome-47
-      options: --privileged
-      volumes:
-        - /usr/local/lib/android:/usr/local/lib/android
-        - /usr/share/dotnet:/usr/share/dotnet
-        - /opt/ghc:/opt/ghc1
-        - /usr/local/share/boost:/usr/local/share/boost1
-    strategy:
-      matrix:
-        variant:
-          - arch: x86_64
-            runner: ubuntu-24.04
-          - arch: aarch64
-            runner: ubuntu-24.04-arm
-    runs-on: ${{ matrix.variant.runner }}
-    env:
-      date:
-      ver:
-      ver_pure:
-    steps:
-    - name: "Remove unneeded stuff to free disk space"
-      run:
-        rm -rf /usr/local/lib/android/* /usr/share/dotnet/* /opt/ghc1/* "/usr/local/share/boost1/*"
-    - uses: actions/checkout@v5
-    - name: Get the version and date
-      run: |
-        ver_pure=$(grep 'set(SoftFever_VERSION' version.inc | cut -d '"' -f2)
-        if [[ "${{ github.event_name }}" == "pull_request" ]]; then
-          ver="PR-${{ github.event.number }}"
-        else
-          ver=V$ver_pure
-        fi
-        echo "ver=$ver" >> $GITHUB_ENV
-        echo "ver_pure=$ver_pure" >> $GITHUB_ENV
-        echo "date=$(date +'%Y%m%d')" >> $GITHUB_ENV
-      shell: bash
-    - uses: flathub-infra/flatpak-github-actions/flatpak-builder@master
-      with:
-        bundle: OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
-        manifest-path: scripts/flatpak/io.github.softfever.OrcaSlicer.yml
-        cache: true
-        arch: ${{ matrix.variant.arch }}
-        upload-artifact: false
-    - name: Upload artifacts Flatpak
-      uses: actions/upload-artifact@v4
-      with:
-        name: OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
-        path: '/__w/OrcaSlicer/OrcaSlicer/OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak'
-    - name: Deploy Flatpak to nightly release
-      if: ${{github.ref == 'refs/heads/main'}}
-      uses: WebFreak001/deploy-nightly@v3.2.0
-      with:
-        upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
-        release_id: 137995723
-        asset_path: /__w/OrcaSlicer/OrcaSlicer/OrcaSlicer-Linux-flatpak_${{ env.ver }}_${{ matrix.variant.arch }}.flatpak
-        asset_name: OrcaSlicer-Linux-flatpak_nightly_${{ matrix.variant.arch }}.flatpak
-        asset_content_type: application/octet-stream
-        max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted

.github/workflows/build_check_cache.yml

@@ -1,59 +0,0 @@
-name: Check Cache
-
-on:
-  workflow_call:
-    inputs:
-      os:
-        required: true
-        type: string
-      arch:
-        required: false
-        type: string
-      build-deps-only:
-        required: false
-        type: boolean
-  
-jobs:
-  check_cache: # determines if there is a cache and outputs variables used in caching process
-    name: Check Cache
-    runs-on: ${{ inputs.os }}
-    outputs:
-      cache-key: ${{ steps.set_outputs.outputs.cache-key }}
-      cache-path: ${{ steps.set_outputs.outputs.cache-path }}
-      valid-cache: ${{ steps.cache_deps.outputs.cache-hit }}
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-        with:
-          lfs: 'true'
-        
-      - name: set outputs
-        id: set_outputs
-        env:
-          # todo: this is mad! refactor other build scripts to use same name
-          dep-folder-name: ${{ inputs.os == 'windows-latest' && '/OrcaSlicer_dep' || inputs.os == 'macos-14' && '' || inputs.os != 'macos-14' && '/destdir' || '' }}
-          output-cmd: ${{ inputs.os == 'windows-latest' && '$env:GITHUB_OUTPUT' || '"$GITHUB_OUTPUT"'}}
-        run: |
-          echo cache-key=${{ inputs.os }}-cache-orcaslicer_deps-build-${{ hashFiles('deps/**') }} >> ${{ env.output-cmd }}
-          echo cache-path=${{ github.workspace }}/deps/build${{ env.dep-folder-name }} >> ${{ env.output-cmd }}
-            
-      - name: load cache
-        id: cache_deps
-        uses: actions/cache@v4
-        with:
-          path: ${{ steps.set_outputs.outputs.cache-path }}
-          key: ${{ steps.set_outputs.outputs.cache-key }}
-          lookup-only: true
-        
-  build_deps: # call next step
-    name: Build Deps
-    needs: [check_cache]
-    uses: ./.github/workflows/build_deps.yml
-    with:
-      cache-key: ${{ needs.check_cache.outputs.cache-key }}
-      cache-path: ${{ needs.check_cache.outputs.cache-path }}
-      valid-cache: ${{ needs.check_cache.outputs.valid-cache == 'true' }}
-      os: ${{ inputs.os }}
-      arch: ${{ inputs.arch }}
-      build-deps-only: ${{ inputs.build-deps-only }}
-    secrets: inherit

.github/workflows/build_deps.yml

@@ -1,149 +0,0 @@
-on:
-  workflow_call:
-    inputs:
-      cache-key:
-        required: true
-        type: string
-      cache-path:
-        required: true
-        type: string
-      valid-cache:
-        required: true
-        type: boolean
-      os:
-        required: true
-        type: string
-      arch:
-        required: false
-        type: string
-      build-deps-only:
-        required: false
-        type: boolean
-
-jobs:
-  build_deps:
-    name: Build Deps
-    if: inputs.build-deps-only || inputs.valid-cache != true
-    runs-on: ${{ inputs.os }}
-    env:
-      date:
-    steps:
-
-      # Setup the environment
-      - name: Checkout
-        uses: actions/checkout@v5
-        with:
-          lfs: 'true'
-
-      - name: load cached deps
-        uses: actions/cache@v4
-        with:
-          path: ${{ inputs.cache-path }}
-          key: ${{ inputs.cache-key }}
-
-      - uses: lukka/get-cmake@latest
-        with:
-          cmakeVersion: "~3.28.0"  # use most recent 3.28.x version
-
-      - name: setup dev on Windows
-        if: inputs.os == 'windows-latest'
-        uses: microsoft/setup-msbuild@v2
-
-      - name: Get the date on Ubuntu and macOS
-        if: inputs.os != 'windows-latest'
-        run: echo "date=$(date +'%Y%m%d')" >> $GITHUB_ENV
-        shell: bash
-
-      - name: Get the date on Windows
-        if: inputs.os == 'windows-latest'
-        run: echo "date=$(Get-Date -Format 'yyyyMMdd')" | Out-File -Append -FilePath $env:GITHUB_ENV -Encoding utf8
-        shell: pwsh
-
-
-      # Build Dependencies
-      - name: Build on Windows
-        if: inputs.os == 'windows-latest'
-        working-directory: ${{ github.workspace }}
-        run: |
-            choco install strawberryperl
-            .\build_release_vs2022.bat deps
-            .\build_release_vs2022.bat pack
-            cd ${{ github.workspace }}/deps/build
-
-      - name: Build on Mac ${{ inputs.arch }}
-        if: inputs.os == 'macos-14'
-        working-directory: ${{ github.workspace }}
-        run: |
-            brew install automake texinfo libtool
-            brew list
-            brew uninstall --ignore-dependencies zstd
-            ./build_release_macos.sh -dx -a universal -t 10.15 -1
-            for arch in arm64 x86_64; do
-                (cd "${{ github.workspace }}/deps/build/${arch}" && \
-                find . -mindepth 1 -maxdepth 1 ! -name 'OrcaSlicer_dep' -exec rm -rf {} +)
-            done
-            brew install zstd
-
-
-      - name: Install Ubuntu Build Dependencies
-        if: inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04'
-        working-directory: ${{ github.workspace }}
-        env:
-          apt-cmd: ${{ (inputs.os == 'ubuntu-20.04' && 'apt-fast') || (inputs.os == 'ubuntu-24.04' && 'sudo apt-get') || '' }}
-          webkit-ver: ${{ (inputs.os == 'ubuntu-20.04' && '4.0') || (inputs.os == 'ubuntu-24.04' && '4.1') || '' }}
-        run: |
-            ${{ env.apt-cmd }} update
-            ${{ env.apt-cmd }} install -y cmake git g++ build-essential libgl1-mesa-dev m4 \
-            libwayland-dev libxkbcommon-dev wayland-protocols extra-cmake-modules pkgconf \
-            libglu1-mesa-dev libcairo2-dev libgtk-3-dev libsoup2.4-dev libwebkit2gtk-${{ env.webkit-ver }}-dev \
-            libgstreamer1.0-dev libgstreamer-plugins-good1.0-dev libgstreamer-plugins-base1.0-dev \
-            gstreamer1.0-plugins-bad wget sudo autoconf curl libunwind-dev texinfo
-
-      - name: Build on Ubuntu
-        if: inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04'
-        working-directory: ${{ github.workspace }}
-        run: |
-            mkdir -p ${{ github.workspace }}/deps/build
-            mkdir -p ${{ github.workspace }}/deps/build/destdir
-            sudo ./build_linux.sh -ur
-            sudo chown $USER -R ./
-            ./build_linux.sh -dr
-            cd deps/build
-            tar -czvf OrcaSlicer_dep_ubuntu_$(date +"%Y%m%d").tar.gz destdir
-
-
-      # Upload Artifacts
-      # - name: Upload Mac ${{ inputs.arch }} artifacts
-      #   if: inputs.os == 'macos-14'
-      #   uses: actions/upload-artifact@v4
-      #   with:
-      #     name: OrcaSlicer_dep_mac_${{ env.date }}
-      #     path: ${{ github.workspace }}/deps/build/OrcaSlicer_dep*.tar.gz
-
-      - name: Upload Windows artifacts
-        if: inputs.os == 'windows-latest'
-        uses: actions/upload-artifact@v4
-        with:
-          name: OrcaSlicer_dep_win64_${{ env.date }}
-          path: ${{ github.workspace }}/deps/build/OrcaSlicer_dep*.zip
-
-      - name: Upload Ubuntu artifacts
-        if: ${{ ! env.ACT && inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04' }}
-        env:
-          ubuntu-ver: ${{ (inputs.os == 'ubuntu-20.04' && '2004') || (inputs.os == 'ubuntu-24.04' && '2404') || '' }}
-        uses: actions/upload-artifact@v4
-        with:
-          name: OrcaSlicer_dep_ubuntu_${{ env.ubuntu-ver }}_${{ env.date }}
-          path: ${{ github.workspace }}/deps/build/OrcaSlicer_dep_ubuntu_*.tar.gz
-
-  build_orca:
-    name: Build OrcaSlicer
-    needs: [build_deps]
-    if: ${{ !cancelled() && !inputs.build-deps-only && (inputs.valid-cache == true && needs.build_deps.result == 'skipped') || (inputs.valid-cache != true && success()) }}
-    uses: ./.github/workflows/build_orca.yml
-    with:
-      cache-key: ${{ inputs.cache-key }}
-      cache-path: ${{ inputs.cache-path }}
-      os: ${{ inputs.os }}
-      arch: ${{ inputs.arch }}
-    secrets: inherit

.github/workflows/build_orca.yml

@@ -1,408 +0,0 @@
-on:
-    workflow_call:
-      inputs:
-        cache-key:
-          required: true
-          type: string
-        cache-path:
-          required: true
-          type: string
-        os:
-          required: true
-          type: string
-        arch:
-          required: false
-          type: string
-
-jobs:
-  build_orca:
-    name: Build OrcaSlicer
-    runs-on: ${{ inputs.os }}
-    env:
-      date:
-      ver:
-      ver_pure:
-
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-        with:
-          lfs: 'true'
-
-      - name: load cached deps
-        uses: actions/cache@v4
-        with:
-          path: ${{ inputs.cache-path }}
-          key: ${{ inputs.cache-key }}
-          fail-on-cache-miss: true
-
-      - uses: lukka/get-cmake@latest
-        with:
-          cmakeVersion: "~3.28.0"  # use most recent 3.28.x version
-          
-      - name: Get the version and date on Ubuntu and macOS
-        if: inputs.os != 'windows-latest'
-        run: |
-          ver_pure=$(grep 'set(SoftFever_VERSION' version.inc | cut -d '"' -f2)
-          if [[ "${{ github.event_name }}" == "pull_request" ]]; then
-            ver="PR-${{ github.event.number }}"
-          else
-            ver=V$ver_pure
-          fi
-          echo "ver=$ver" >> $GITHUB_ENV
-          echo "ver_pure=$ver_pure" >> $GITHUB_ENV
-          echo "date=$(date +'%Y%m%d')" >> $GITHUB_ENV
-        shell: bash
-
-      - name: Get the version and date on Windows
-        if: inputs.os == 'windows-latest'
-        run: |
-          $date = Get-Date -Format 'yyyyMMdd'
-          $ref = "${{ github.ref }}"
-          $eventName = "${{ github.event_name }}"
-          $prNumber = "${{ github.event.number }}"
-
-          if ($eventName -eq 'pull_request') {
-              $ver = "PR" + $prNumber
-          } else {
-              $versionContent = Get-Content version.inc -Raw
-              if ($versionContent -match 'set\(SoftFever_VERSION "(.*?)"\)') {
-                  $ver = $matches[1]
-              }
-              $ver = "V$ver"
-          }
-
-          echo "ver=$ver" | Out-File -Append -FilePath $env:GITHUB_ENV -Encoding utf8
-          echo "date=$date" | Out-File -Append -FilePath $env:GITHUB_ENV -Encoding utf8
-          echo "date: ${{ env.date }} version: ${{ env.ver }}"
-        shell: pwsh
-
-#   Mac
-      - name: Install tools mac
-        if: inputs.os == 'macos-14'
-        run: |
-          brew install libtool
-          brew list
-          mkdir -p ${{ github.workspace }}/deps/build
-
-      - name: Free disk space
-        if: inputs.os == 'macos-14'
-        run: |
-          df -hI /dev/disk3s1s1
-          sudo find /Applications -maxdepth 1 -type d -name "Xcode_*.app" ! -name "Xcode_15.4.app" -exec rm -rf {} +
-          sudo rm -rf ~/Library/Developer/CoreSimulator/Caches/*
-          df -hI /dev/disk3s1s1
-
-      - name: Build slicer mac
-        if: inputs.os == 'macos-14'
-        working-directory: ${{ github.workspace }}
-        run: |
-          ./build_release_macos.sh -s -n -x -a universal -t 10.15 -1
-
- # Thanks to RaySajuuk, it's working now
-      - name: Sign app and notary
-        if: (github.ref == 'refs/heads/main' || startsWith(github.ref, 'refs/heads/release/')) && inputs.os == 'macos-14'
-        working-directory: ${{ github.workspace }}
-        env:
-          BUILD_CERTIFICATE_BASE64: ${{ secrets.BUILD_CERTIFICATE_BASE64 }}
-          P12_PASSWORD: ${{ secrets.P12_PASSWORD }}
-          KEYCHAIN_PASSWORD: ${{ secrets.KEYCHAIN_PASSWORD }}
-          CERTIFICATE_ID: ${{ secrets.MACOS_CERTIFICATE_ID }}
-        run: |
-          CERTIFICATE_PATH=$RUNNER_TEMP/build_certificate.p12
-          KEYCHAIN_PATH=$RUNNER_TEMP/app-signing.keychain-db
-          echo -n "$BUILD_CERTIFICATE_BASE64" | base64 --decode --output $CERTIFICATE_PATH
-          security create-keychain -p $KEYCHAIN_PASSWORD $KEYCHAIN_PATH
-          security set-keychain-settings -lut 21600 $KEYCHAIN_PATH
-          security unlock-keychain -p $KEYCHAIN_PASSWORD $KEYCHAIN_PATH
-          security import $CERTIFICATE_PATH -P $P12_PASSWORD -A -t cert -f pkcs12 -k $KEYCHAIN_PATH
-          security list-keychain -d user -s $KEYCHAIN_PATH
-          security set-key-partition-list -S apple-tool:,apple:,codesign: -s -k $P12_PASSWORD $KEYCHAIN_PATH
-          codesign --deep --force --verbose --options runtime --timestamp --entitlements ${{ github.workspace }}/scripts/disable_validation.entitlements --sign "$CERTIFICATE_ID" ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer.app
-          # Sign OrcaSlicer_profile_validator.app if it exists
-          if [ -f "${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app/Contents/MacOS/OrcaSlicer_profile_validator" ]; then
-            codesign --deep --force --verbose --options runtime --timestamp --entitlements ${{ github.workspace }}/scripts/disable_validation.entitlements --sign "$CERTIFICATE_ID" ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app
-          fi
-          
-          # Create main OrcaSlicer DMG
-          ln -s /Applications ${{ github.workspace }}/build/universal/OrcaSlicer/Applications
-          hdiutil create -volname "OrcaSlicer" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer -ov -format UDZO OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
-          codesign --deep --force --verbose --options runtime --timestamp --entitlements ${{ github.workspace }}/scripts/disable_validation.entitlements --sign "$CERTIFICATE_ID" OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
-          
-          # Create separate OrcaSlicer_profile_validator DMG if the app exists
-          if [ -f "${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app/Contents/MacOS/OrcaSlicer_profile_validator" ]; then
-            mkdir -p ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg
-            cp -R ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/
-            ln -s /Applications ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/Applications
-            hdiutil create -volname "OrcaSlicer Profile Validator" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg -ov -format UDZO OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
-            codesign --deep --force --verbose --options runtime --timestamp --entitlements ${{ github.workspace }}/scripts/disable_validation.entitlements --sign "$CERTIFICATE_ID" OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
-          fi
-          
-          # Notarize main DMG
-          xcrun notarytool store-credentials "notarytool-profile" --apple-id "${{ secrets.APPLE_DEV_ACCOUNT }}" --team-id "${{ secrets.TEAM_ID }}" --password "${{ secrets.APP_PWD }}"
-          xcrun notarytool submit "OrcaSlicer_Mac_universal_${{ env.ver }}.dmg" --keychain-profile "notarytool-profile" --wait
-          xcrun stapler staple OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
-          
-          # Notarize profile validator DMG if it exists
-          if [ -f "OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg" ]; then
-            xcrun notarytool submit "OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg" --keychain-profile "notarytool-profile" --wait
-            xcrun stapler staple OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
-          fi
-
-      - name: Create DMG without notary
-        if: github.ref != 'refs/heads/main' && inputs.os == 'macos-14'
-        working-directory: ${{ github.workspace }}
-        run: |
-          ln -s /Applications ${{ github.workspace }}/build/universal/OrcaSlicer/Applications
-          hdiutil create -volname "OrcaSlicer" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer -ov -format UDZO OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
-          
-          # Create separate OrcaSlicer_profile_validator DMG if the app exists
-          if [ -f "${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app/Contents/MacOS/OrcaSlicer_profile_validator" ]; then
-            mkdir -p ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg
-            cp -R ${{ github.workspace }}/build/universal/OrcaSlicer/OrcaSlicer_profile_validator.app ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/
-            ln -s /Applications ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg/Applications
-            hdiutil create -volname "OrcaSlicer Profile Validator" -srcfolder ${{ github.workspace }}/build/universal/OrcaSlicer_profile_validator_dmg -ov -format UDZO OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
-          fi
-
-      - name: Upload artifacts mac
-        if: inputs.os == 'macos-14'
-        uses: actions/upload-artifact@v4
-        with:
-          name: OrcaSlicer_Mac_universal_${{ env.ver }}
-          path: ${{ github.workspace }}/OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
-
-      - name: Upload OrcaSlicer_profile_validator DMG mac
-        if: inputs.os == 'macos-14'
-        uses: actions/upload-artifact@v4
-        with:
-          name: OrcaSlicer_profile_validator_Mac_universal_DMG_${{ env.ver }}
-          path: ${{ github.workspace }}/OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
-          if-no-files-found: ignore
-
-      - name: Deploy Mac release
-        if: github.ref == 'refs/heads/main' && inputs.os == 'macos-14'
-        uses: WebFreak001/deploy-nightly@v3.2.0
-        with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/OrcaSlicer_Mac_universal_${{ env.ver }}.dmg
-          asset_name: OrcaSlicer_Mac_universal_nightly.dmg
-          asset_content_type: application/octet-stream
-          max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
-
-      - name: Deploy Mac OrcaSlicer_profile_validator DMG release
-        if: github.ref == 'refs/heads/main' && inputs.os == 'macos-14'
-        uses: WebFreak001/deploy-nightly@v3.2.0
-        with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/OrcaSlicer_profile_validator_Mac_universal_${{ env.ver }}.dmg
-          asset_name: OrcaSlicer_profile_validator_Mac_universal_nightly.dmg
-          asset_content_type: application/octet-stream
-          max_releases: 1
-
-# Windows
-      - name: setup MSVC
-        if: inputs.os == 'windows-latest'
-        uses: microsoft/setup-msbuild@v2
-
-      - name: Install nsis
-        if: inputs.os == 'windows-latest'
-        run: |
-          dir "C:/Program Files (x86)/Windows Kits/10/Include"
-          choco install nsis
-
-      - name: Build slicer Win
-        if: inputs.os == 'windows-latest'
-        working-directory: ${{ github.workspace }}
-        env:
-          WindowsSdkDir: 'C:\Program Files (x86)\Windows Kits\10\'
-          WindowsSDKVersion: '10.0.26100.0\'
-        run: .\build_release_vs2022.bat slicer
-
-      - name: Create installer Win
-        if: inputs.os == 'windows-latest'
-        working-directory: ${{ github.workspace }}/build
-        run: |
-          cpack -G NSIS
-
-      - name: Pack app
-        if: inputs.os == 'windows-latest'
-        working-directory: ${{ github.workspace }}/build
-        shell: cmd
-        run: '"C:/Program Files/7-Zip/7z.exe" a -tzip OrcaSlicer_Windows_${{ env.ver }}_portable.zip ${{ github.workspace }}/build/OrcaSlicer'
-
-      - name: Pack PDB
-        if: inputs.os == 'windows-latest'
-        working-directory: ${{ github.workspace }}/build/src/Release
-        shell: cmd
-        run: '"C:/Program Files/7-Zip/7z.exe" a -m0=lzma2 -mx9 Debug_PDB_${{ env.ver }}_for_developers_only.7z  *.pdb'
-
-      - name: Upload artifacts Win zip
-        if: inputs.os == 'windows-latest'
-        uses: actions/upload-artifact@v4
-        with:
-          name: OrcaSlicer_Windows_${{ env.ver }}_portable
-          path: ${{ github.workspace }}/build/OrcaSlicer
-
-      - name: Upload artifacts Win installer
-        if: inputs.os == 'windows-latest'
-        uses: actions/upload-artifact@v4
-        with:
-          name: OrcaSlicer_Windows_${{ env.ver }}
-          path: ${{ github.workspace }}/build/OrcaSlicer*.exe
-
-      - name: Upload artifacts Win PDB
-        if: inputs.os == 'windows-latest'
-        uses: actions/upload-artifact@v4
-        with:
-          name: PDB
-          path: ${{ github.workspace }}/build/src/Release/Debug_PDB_${{ env.ver }}_for_developers_only.7z
-
-      - name: Upload OrcaSlicer_profile_validator Win
-        if: inputs.os == 'windows-latest'
-        uses: actions/upload-artifact@v4
-        with:
-          name: OrcaSlicer_profile_validator_Windows_${{ env.ver }}
-          path: ${{ github.workspace }}/build/src/Release/OrcaSlicer_profile_validator.exe
-
-      - name: Deploy Windows release portable
-        if: github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
-        uses: WebFreak001/deploy-nightly@v3.2.0
-        with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_${{ env.ver }}_portable.zip
-          asset_name: OrcaSlicer_Windows_nightly_portable.zip
-          asset_content_type: application/x-zip-compressed
-          max_releases: 1
-
-      - name: Deploy Windows release installer
-        if: github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
-        uses: WebFreak001/deploy-nightly@v3.2.0
-        with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/build/OrcaSlicer_Windows_Installer_${{ env.ver }}.exe
-          asset_name: OrcaSlicer_Windows_Installer_nightly.exe
-          asset_content_type: application/x-msdownload
-          max_releases: 1
-
-      - name: Deploy Windows OrcaSlicer_profile_validator release
-        if: github.ref == 'refs/heads/main' && inputs.os == 'windows-latest'
-        uses: WebFreak001/deploy-nightly@v3.2.0
-        with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/build/src/Release/OrcaSlicer_profile_validator.exe
-          asset_name: OrcaSlicer_profile_validator_Windows_nightly.exe
-          asset_content_type: application/x-msdownload
-          max_releases: 1
-
-# Ubuntu
-      - name: Install dependencies
-        if: inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04'
-        env:
-          apt-cmd: ${{ (inputs.os == 'ubuntu-20.04' && 'apt-fast') || (inputs.os == 'ubuntu-24.04' && 'sudo apt-get') || '' }}
-          webkit-ver: ${{ (inputs.os == 'ubuntu-20.04' && '4.0') || (inputs.os == 'ubuntu-24.04' && '4.1') || '' }}
-          libfuse2-pkg: ${{ (inputs.os == 'ubuntu-20.04' && 'libfuse2') || (inputs.os == 'ubuntu-24.04' && 'libfuse2t64') || '' }}
-        run: |
-          ${{ env.apt-cmd }} update
-          ${{ env.apt-cmd }} install -y autoconf build-essential cmake curl eglexternalplatform-dev \
-          extra-cmake-modules file git libcairo2-dev libcurl4-openssl-dev libdbus-1-dev libglew-dev libglu1-mesa-dev \
-          libglu1-mesa-dev libgstreamer1.0-dev libgstreamerd-3-dev libgstreamer-plugins-base1.0-dev libgstreamer-plugins-good1.0-dev \
-          libgtk-3-dev libgtk-3-dev libmspack-dev libsecret-1-dev libsoup2.4-dev libssl-dev libudev-dev libwayland-dev \
-          libwebkit2gtk-${{ env.webkit-ver }}-dev libxkbcommon-dev locales locales-all m4 pkgconf sudo wayland-protocols wget ${{ env.libfuse2-pkg }}
-
-      - name: Install dependencies from build_linux.sh
-        if: inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04'
-        shell: bash
-        run: sudo ./build_linux.sh -ur
-
-      - name: Fix permissions
-        if: inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04'
-        shell: bash
-        run: sudo chown $USER -R ./
-
-      - name: Build slicer
-        if: inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04'
-        shell: bash
-        env:
-          ubuntu-ver-str: ${{ (inputs.os == 'ubuntu-24.04' && '_Ubuntu2404') || '' }}
-        run: |
-          ./build_linux.sh -isr
-          mv -n ./build/OrcaSlicer_Linux_V${{ env.ver_pure }}.AppImage ./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
-          chmod +x ./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
-
-      - name: Build orca_custom_preset_tests
-        if: github.ref == 'refs/heads/main' && inputs.os == 'ubuntu-24.04'
-        working-directory: ${{ github.workspace }}/build/src/Release
-        shell: bash
-        run: |
-          ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -g 1
-          cd ${{ github.workspace }}/resources/profiles
-          zip -r orca_custom_preset_tests.zip user/
-
-      - name: Upload artifacts Ubuntu
-        if: ${{ ! env.ACT && inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04' }}
-        env:
-          ubuntu-ver: ${{ (inputs.os == 'ubuntu-20.04' && '2004') || (inputs.os == 'ubuntu-24.04' && '2404') || '' }}
-          ubuntu-ver-str: ${{ (inputs.os == 'ubuntu-24.04' && '_Ubuntu2404') || '' }}
-        uses: actions/upload-artifact@v4
-        with:
-          name: OrcaSlicer_Linux_ubuntu_${{ env.ubuntu-ver }}_${{ env.ver }}
-          path: './build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage'
-
-      - name: Upload OrcaSlicer_profile_validator Ubuntu
-        if: ${{ ! env.ACT && inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04' }}
-        env:
-          ubuntu-ver: ${{ (inputs.os == 'ubuntu-20.04' && '2004') || (inputs.os == 'ubuntu-24.04' && '2404') || '' }}
-        uses: actions/upload-artifact@v4
-        with:
-          name: OrcaSlicer_profile_validator_Linux_ubuntu_${{ env.ubuntu-ver }}_${{ env.ver }}
-          path: './build/src/Release/OrcaSlicer_profile_validator'
-
-      - name: Deploy Ubuntu release
-        if: ${{ ! env.ACT && github.ref == 'refs/heads/main' && (inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04') }}
-        env:
-          ubuntu-ver-str: ${{ (inputs.os == 'ubuntu-24.04' && '_Ubuntu2404') || '' }}
-        uses: WebFreak001/deploy-nightly@v3.2.0
-        with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ./build/OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_${{ env.ver }}.AppImage
-          asset_name: OrcaSlicer_Linux_AppImage${{ env.ubuntu-ver-str }}_nightly.AppImage
-          asset_content_type: application/octet-stream
-          max_releases: 1 # optional, if there are more releases than this matching the asset_name, the oldest ones are going to be deleted
-      - name: Deploy Ubuntu release
-        if: ${{ ! env.ACT && github.ref == 'refs/heads/main' && inputs.os == 'ubuntu-24.04' }}
-        uses: rickstaa/action-create-tag@v1
-        with:
-          tag: "nightly-builds"
-          tag_exists_error: false
-          force_push_tag: true
-          message: "nightly-builds"
-
-      - name: Deploy Ubuntu OrcaSlicer_profile_validator release
-        if: ${{ ! env.ACT && github.ref == 'refs/heads/main' && (inputs.os == 'ubuntu-20.04' || inputs.os == 'ubuntu-24.04') }}
-        env:
-          ubuntu-ver-str: ${{ (inputs.os == 'ubuntu-24.04' && '_Ubuntu2404') || '' }}
-        uses: WebFreak001/deploy-nightly@v3.2.0
-        with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ./build/src/Release/OrcaSlicer_profile_validator
-          asset_name: OrcaSlicer_profile_validator_Linux${{ env.ubuntu-ver-str }}_nightly
-          asset_content_type: application/octet-stream
-          max_releases: 1
-
-      - name: Deploy orca_custom_preset_tests
-        if: ${{ ! env.ACT && github.ref == 'refs/heads/main' && inputs.os == 'ubuntu-24.04' }}
-        uses: WebFreak001/deploy-nightly@v3.2.0
-        with:
-          upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}
-          release_id: 137995723
-          asset_path: ${{ github.workspace }}/resources/profiles/orca_custom_preset_tests.zip
-          asset_name: orca_custom_preset_tests.zip
-          asset_content_type: application/octet-stream
-          max_releases: 1

.github/workflows/check_locale.yml

@@ -1,44 +0,0 @@
-name: Check locale
-
-on: 
-    pull_request:
-      branches: 
-       - main 
-      paths:
-       - 'localization/**'
-       - ".github/workflows/check_locale.yml"
-
-jobs:
-  check_translation:
-    name: Check translation
-    runs-on: ubuntu-latest
-    steps:  
-      - name: Checkout repository
-        uses: actions/checkout@v5
-
-      - name: Install gettext 
-        run: |
-          sudo apt-get update
-          sudo apt-get install -y gettext
-
-      # don't call ./run_gentext.sh as most translators never sync with main branch...
-      - name: Check translation format
-        run: |
-          echo $PWD
-          pot_file="./localization/i18n/OrcaSlicer.pot"
-          for dir in ./localization/i18n/*/
-          do
-              dir=${dir%*/}      # remove the trailing "/"
-              lang=${dir##*/}    # extract the language identifier
-          
-              if [ -f "$dir/OrcaSlicer_${lang}.po" ]; then
-                  mkdir -p ./resources/i18n/${lang}/
-                  msgfmt --check-format -o ./resources/i18n/${lang}/OrcaSlicer.mo $dir/OrcaSlicer_${lang}.po
-                  # Check the exit status of the msgfmt command
-                  if [ $? -ne 0 ]; then
-                      echo "Error encountered with msgfmt command for language ${lang}."
-                      exit 1  # Exit the script with an error status
-                  fi
-              fi
-          done
-        

.github/workflows/check_profiles.yml

@@ -1,51 +0,0 @@
-name: Check profiles
-on: 
-  pull_request:
-    branches: 
-    - main 
-    paths:
-    - 'resources/profiles/**'
-    - ".github/workflows/check_profiles.yml"
-
-  workflow_dispatch:
-    inputs:
-      logLevel:
-        description: 'Log level'     
-        required: true
-        default: 'warning'
-
-
-jobs:
-  check_translation:
-    name: Check profiles
-    runs-on: ubuntu-24.04
-    steps:  
-      - name: Checkout repository
-        uses: actions/checkout@v5
-
-      - name: Run extra JSON check
-        run: |
-          python3 ./scripts/orca_extra_profile_check.py
-
-      # download
-      - name: Download 
-        working-directory: ${{ github.workspace }}
-        run: |
-          curl -LJO https://github.com/SoftFever/Orca_tools/releases/download/1/OrcaSlicer_profile_validator
-          chmod +x ./OrcaSlicer_profile_validator
-
-      # validate profiles
-      - name: validate system profiles
-        run: |
-          ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2
-
-      - name: validate custom presets
-        working-directory: ${{ github.workspace }}
-        run: |
-          curl -LJO https://github.com/SoftFever/OrcaSlicer/releases/download/nightly-builds/orca_custom_preset_tests.zip
-          unzip ./orca_custom_preset_tests.zip -d ${{ github.workspace }}/resources/profiles
-          ./OrcaSlicer_profile_validator -p ${{ github.workspace }}/resources/profiles -l 2
-
-
-
-

.github/workflows/claude-code-review.yml

@@ -1,71 +0,0 @@
-name: Claude Code Review
-
-on:
-  workflow_dispatch:
-
-jobs:
-  claude-review:
-    # Optional: Filter by PR author
-    # if: |
-    #   github.event.pull_request.user.login == 'external-contributor' ||
-    #   github.event.pull_request.user.login == 'new-developer' ||
-    #   github.event.pull_request.author_association == 'FIRST_TIME_CONTRIBUTOR'
-    
-    runs-on: ubuntu-latest
-    permissions:
-      contents: read
-      pull-requests: read
-      issues: read
-      id-token: write
-    
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v5
-        with:
-          fetch-depth: 1
-
-      - name: Run Claude Code Review
-        id: claude-review
-        uses: anthropics/claude-code-action@beta
-        with:
-          claude_code_oauth_token: ${{ secrets.CLAUDE_CODE_OAUTH_TOKEN }}
-
-          # Optional: Specify model (defaults to Claude Sonnet 4, uncomment for Claude Opus 4.1)
-          # model: "claude-opus-4-1-20250805"
-
-          # Direct prompt for automated review (no @claude mention needed)
-          direct_prompt: |
-            Please review this pull request and provide feedback on:
-            - Code quality and best practices
-            - Potential bugs or issues
-            - Performance considerations
-            - Security concerns
-            - Test coverage
-            
-            Be constructive and helpful in your feedback.
-
-          # Optional: Use sticky comments to make Claude reuse the same comment on subsequent pushes to the same PR
-          # use_sticky_comment: true
-          
-          # Optional: Customize review based on file types
-          # direct_prompt: |
-          #   Review this PR focusing on:
-          #   - For TypeScript files: Type safety and proper interface usage
-          #   - For API endpoints: Security, input validation, and error handling
-          #   - For React components: Performance, accessibility, and best practices
-          #   - For tests: Coverage, edge cases, and test quality
-          
-          # Optional: Different prompts for different authors
-          # direct_prompt: |
-          #   ${{ github.event.pull_request.author_association == 'FIRST_TIME_CONTRIBUTOR' && 
-          #   'Welcome! Please review this PR from a first-time contributor. Be encouraging and provide detailed explanations for any suggestions.' ||
-          #   'Please provide a thorough code review focusing on our coding standards and best practices.' }}
-          
-          # Optional: Add specific tools for running tests or linting
-          # allowed_tools: "Bash(npm run test),Bash(npm run lint),Bash(npm run typecheck)"
-          
-          # Optional: Skip review for certain conditions
-          # if: |
-          #   !contains(github.event.pull_request.title, '[skip-review]') &&
-          #   !contains(github.event.pull_request.title, '[WIP]')
-

.github/workflows/claude.yml

@@ -1,64 +0,0 @@
-name: Claude Code
-
-on:
-  issue_comment:
-    types: [created]
-  pull_request_review_comment:
-    types: [created]
-  issues:
-    types: [opened, assigned]
-  pull_request_review:
-    types: [submitted]
-
-jobs:
-  claude:
-    if: |
-      (github.event_name == 'issue_comment' && contains(github.event.comment.body, '@claude')) ||
-      (github.event_name == 'pull_request_review_comment' && contains(github.event.comment.body, '@claude')) ||
-      (github.event_name == 'pull_request_review' && contains(github.event.review.body, '@claude')) ||
-      (github.event_name == 'issues' && (contains(github.event.issue.body, '@claude') || contains(github.event.issue.title, '@claude')))
-    runs-on: ubuntu-latest
-    permissions:
-      contents: read
-      pull-requests: read
-      issues: read
-      id-token: write
-      actions: read # Required for Claude to read CI results on PRs
-    steps:
-      - name: Checkout repository
-        uses: actions/checkout@v5
-        with:
-          fetch-depth: 1
-
-      - name: Run Claude Code
-        id: claude
-        uses: anthropics/claude-code-action@beta
-        with:
-          claude_code_oauth_token: ${{ secrets.CLAUDE_CODE_OAUTH_TOKEN }}
-
-          # This is an optional setting that allows Claude to read CI results on PRs
-          additional_permissions: |
-            actions: read
-          
-          # Optional: Specify model (defaults to Claude Sonnet 4, uncomment for Claude Opus 4.1)
-          # model: "claude-opus-4-1-20250805"
-          
-          # Optional: Customize the trigger phrase (default: @claude)
-          # trigger_phrase: "/claude"
-          
-          # Optional: Trigger when specific user is assigned to an issue
-          # assignee_trigger: "claude-bot"
-          
-          # Optional: Allow Claude to run specific commands
-          # allowed_tools: "Bash(npm install),Bash(npm run build),Bash(npm run test:*),Bash(npm run lint:*)"
-          
-          # Optional: Add custom instructions for Claude to customize its behavior for your project
-          # custom_instructions: |
-          #   Follow our coding standards
-          #   Ensure all new code has tests
-          #   Use TypeScript for new files
-          
-          # Optional: Custom environment variables for Claude
-          # claude_env: |
-          #   NODE_ENV: test
-

.github/workflows/orca_bot.yml

@@ -1,73 +0,0 @@
-name: Orca bot
-on:
-  schedule:
-    - cron: "0 0 * * *"
-  workflow_dispatch:
-    inputs:
-      logLevel:
-        description: 'Log level'     
-        required: true
-        default: 'warning'
-        
-jobs:
-  stale:
-    runs-on: ubuntu-latest
-    permissions:
-      issues: write
-      pull-requests: write
-      contents: write # only for delete-branch option
-    steps:
-      - uses: actions/stale@v9
-        with:
-          # PAT for GitHub API authentication
-          repo-token: ${{ secrets.GITHUB_TOKEN }}
-          # Max number of operations per run
-          operations-per-run: 1000
-          # Order to get issues/PRs
-          ascending: true
-
-          # ISSUES
-          # Do not auto-close an issue if it is assigned to a milestone
-          exempt-all-issue-milestones: true
-          # Exempt all issues with assignees from stale
-          exempt-all-issue-assignees: true
-          # Exempt feature requests
-          exempt-issue-labels: "enhancement"
-          # Idle number of days before marking issues stale
-          days-before-issue-stale: 90
-          # Idle number of days before marking issues close
-          days-before-issue-close: 7
-          # Label to apply on staled issues
-          stale-issue-label: "stale"
-          # Issue close reason
-          close-issue-reason: not_planned
-          # Remove stale label from issues on updates
-          remove-issue-stale-when-updated: true
-          # Issue stale message
-          stale-issue-message: "Orca bot: this issue is stale because it has been open for 90 days with no activity."
-          # Issue closure message
-          close-issue-message: "Orca bot: This issue was closed because it has been inactive for 7 days since being marked as stale."
-
-          # PRs
-          # Do not auto-close a PR if it is assigned to a milestone
-          exempt-all-pr-milestones: true
-          # Exempt all PRs with assignees from stale
-          exempt-all-pr-assignees: true
-          # Skip the stale action for draft PRs
-          exempt-draft-pr: true
-          # Idle number of days before marking PRs stale
-          days-before-pr-stale: -1
-          # Idle number of days before marking PRs close
-          days-before-pr-close: -1
-          # Label to apply on staled PRs
-          stale-pr-label: "stale"
-          # Label to apply on closed PRs
-          close-pr-label: not_planned
-          # Remove stale label from PRs on updates
-          remove-pr-stale-when-updated: true
-          # PR stale message
-          stale-pr-message: "Orca bot: this PR is stale because it has been open for XX days with no activity."
-          # PR closure message
-          close-pr-message: "Orca bot: This PR was closed because it has been inactive for X days since being marked as stale."
-          # Delete branch after closing a stale PR
-          delete-branch: true

.github/workflows/publish_docs_to_wiki.yml

@@ -1,46 +0,0 @@
-name: Publish docs to Wiki
-
-# Trigger this action only if there are changes pushed to the doc/** directory under the main branch
-on:
-  push:
-    paths:
-      - doc/** # This includes all sub folders
-    branches:
-      - main # This can be changed to any branch of your preference
-
-  workflow_dispatch:
-    inputs:
-      logLevel:
-        description: 'Log level'     
-        required: true
-        default: 'warning'
-
-env:
-  USER_TOKEN: ${{ secrets.GH_WIKI_PAT }} # This is the repository secret personal access token
-  USER_NAME: ${{ vars.BOT_USER_NAME }} # Enter the username of your (bot) account
-  OWNER: ${{ github.event.repository.owner.name }} # This is the repository owner
-  REPOSITORY_NAME: ${{ github.event.repository.name }} # This is the repository name
-
-jobs:
-  publish_docs_to_wiki:
-    name: Publish docs to Wiki
-    runs-on: ubuntu-latest
-    steps:  
-      - name: Checkout repository
-        uses: actions/checkout@v5
-
-      # 1. Clone the current wiki master branch to a folder named `tmp_wiki`
-      - name: Pull content from wiki
-        run: |
-          git config --global user.name "$USER_NAME"
-          git config --global user.email "$USER_NAME"@users.noreply.github.com
-          git clone https://"$USER_TOKEN"@github.com/SoftFever/"$REPOSITORY_NAME".wiki.git tmp_wiki
-      # 4. Synchronize differences between `doc` & `tmp_wiki`
-      # 5. Push new Wiki content
-      - name: Push main repo content to wiki
-        run: |
-          rsync -av --delete doc/ tmp_wiki/ --exclude .git
-          cd tmp_wiki
-          git add .
-          git commit -m "Updated Wiki content" 
-          git push origin master

.github/workflows/shellcheck.yml

@@ -1,38 +0,0 @@
-on:
-  push:
-    paths:
-      - build_linux.sh
-  pull_request:
-    paths:
-      - build_linux.sh
-  workflow_dispatch: # allows for manual dispatch
-
-name: "Shellcheck"
-permissions: {}
-
-jobs:
-  shellcheck:
-    name: Shellcheck
-    runs-on: ubuntu-latest
-    steps:
-      - name: Cache shellcheck download
-        id: cache-shellcheck-v0_11
-        uses: actions/cache@v4
-        with:
-          path: ~/shellcheck
-          key: ${{ runner.os }}-shellcheck-v0_11
-
-      - name: Download shellcheck
-        if: steps.cache-shellcheck-v0_11.outputs.cache-hit != 'true'
-        shell: bash
-        env:
-          INPUT_VERSION: "v0.11.0"
-        run: |
-          curl -L#o ~/sc.tar.xz "https://github.com/koalaman/shellcheck/releases/download/${INPUT_VERSION}/shellcheck-${INPUT_VERSION}.linux.x86_64.tar.xz"
-          tar -xvf ~/sc.tar.xz -C ~
-          mv ~/shellcheck-"${INPUT_VERSION}"/shellcheck ~/shellcheck
-
-      - uses: actions/checkout@v5
-
-      - name: Shellcheck build_linux.sh
-        run: ~/shellcheck -e SC1090 build_linux.sh

.github/workflows/update-translation.yml

@@ -1,38 +0,0 @@
-name: Update Translation Catalog
-on: 
-  # schedule:
-  #   - cron: 0 0 * * 1
-  workflow_dispatch:
-
-jobs:
-  update_translation:
-    name: Update translation
-    runs-on: ubuntu-latest
-    steps:  
-      - name: Checkout repository
-        uses: actions/checkout@v5
-
-      - name: Setup Python
-        uses: actions/setup-python@v5
-        with:
-          python-version: '3.12'
-
-      - name: Install gettext
-        run: |
-          sudo apt-get update
-          sudo apt-get install -y gettext
-
-      - name: Update translation catalog
-        run: |
-          ./scripts/run_gettext.sh --full
-          git add localization/i18n/*
-
-      - name: Commit translation catalog updates
-        uses: qoomon/actions--create-commit@v1
-        id: commit
-        with:
-          message: Update translation catalog
-          skip-empty: true
-
-      - name: Push changes
-        run: git push

.github/workflows/validate-documentation.yml

@@ -1,335 +0,0 @@
-name: Validate Documentation
-
-on:
-  pull_request:
-    paths:
-      - 'src/slic3r/GUI/Tab.cpp'
-      - 'doc/**/*.md'
-  workflow_dispatch:
-
-permissions:
-  contents: read
-  pull-requests: write
-  issues: write
-
-jobs:
-  validate:
-    runs-on: windows-latest
-    name: Check Documentation
-    
-    steps:
-      - name: Checkout
-        uses: actions/checkout@v5
-      
-      - name: Get changed files
-        id: changed-files
-        uses: tj-actions/changed-files@v46
-        with:
-          files: |
-            src/slic3r/GUI/Tab.cpp
-            doc/**/*.md
-      
-      - name: Run validation
-        if: steps.changed-files.outputs.any_changed == 'true'
-        shell: pwsh
-        run: |
-          # Helper Functions
-          function Normalize-Fragment($fragment) {
-              return $fragment.ToLower().Trim() -replace '[^a-z0-9\s-]', '' -replace ' ', '-' -replace '^-+|-+$', ''
-          }
-          
-          function Add-BrokenReference($sourceFile, $line, $target, $issue, $type) {
-              return @{
-                  SourceFile = $sourceFile
-                  Line = $line
-                  Target = $target
-                  Issue = $issue
-                  Type = $type
-              }
-          }
-          
-          function Validate-Fragment($fragment, $availableAnchors, $sourceFile, $line, $target, $type) {
-              $cleanFragment = $fragment.StartsWith('#') ? $fragment.Substring(1) : $fragment
-              $normalizedFragment = Normalize-Fragment $cleanFragment
-              
-              if ($availableAnchors -notcontains $normalizedFragment) {
-                  return Add-BrokenReference $sourceFile $line $target "Fragment does not exist" $type
-              }
-              return $null
-          }
-          
-          # Initialize
-          $tabFile = Join-Path $PWD "src/slic3r/GUI/Tab.cpp"
-          $docDir = Join-Path $PWD 'doc'
-          $brokenReferences = @()
-          $docIndex = @{}
-          
-          Write-Host "Validating documentation..." -ForegroundColor Blue
-          
-          # Validate paths
-          $hasTabFile = Test-Path $tabFile
-          if (-not $hasTabFile) { Write-Host "::warning::Tab.cpp file not found at: $tabFile" }
-          if (-not (Test-Path $docDir)) { Write-Host "::error::doc folder does not exist"; exit 1 }
-          
-          # Build documentation index
-          $mdFiles = Get-ChildItem -Path $docDir -Filter *.md -Recurse -File -ErrorAction SilentlyContinue
-          
-          foreach ($mdFile in $mdFiles) {
-              $baseName = [System.IO.Path]::GetFileNameWithoutExtension($mdFile.Name)
-              $relPath = (Resolve-Path $mdFile.FullName).Path.Substring($docDir.Length).TrimStart('\', '/')
-              $content = Get-Content -Path $mdFile.FullName -Encoding UTF8 -Raw
-              $lines = Get-Content -Path $mdFile.FullName -Encoding UTF8
-              
-              # Extract anchors
-              $anchors = @()
-              $anchors += [regex]::Matches($content, '(?i)<a\s+[^>]*(?:name|id)\s*=\s*[`"'']([^`"'']+)[`"'']') | 
-                  ForEach-Object { $_.Groups[1].Value.ToLower() }
-              $anchors += [regex]::Matches($content, '(?m)^#+\s+(.+)$') | 
-                  ForEach-Object { Normalize-Fragment $_.Groups[1].Value.Trim() }
-              
-              # Parse links
-              $links = @()
-              $inCodeFence = $false
-              for ($i = 0; $i -lt $lines.Count; $i++) {
-                  $line = $lines[$i]
-                  if ($line.TrimStart() -match '^(```|~~~)') { 
-                      $inCodeFence = -not $inCodeFence
-                      continue 
-                  }
-                  if ($inCodeFence) { continue }
-                  
-                  $lineForParsing = [regex]::Replace($line, '`[^`]*`', '')
-                  foreach ($linkMatch in [regex]::Matches($lineForParsing, '(?<!!)[^\]]*\]\(([^)]+)\)')) {
-                      $destRaw = $linkMatch.Groups[1].Value.Trim()
-                      
-                      # Handle internal fragments
-                      if ($destRaw.StartsWith('#')) {
-                          $fragment = $destRaw.Substring(1)
-                          if ($fragment.Contains('#')) {
-                              $brokenReferences += Add-BrokenReference $relPath ($i + 1) $destRaw "Internal link must use only one #." "Link"
-                          } else {
-                              $validationResult = Validate-Fragment $fragment $anchors $relPath ($i + 1) $destRaw "Link"
-                              if ($validationResult) { $brokenReferences += $validationResult }
-                          }
-                          continue
-                      }
-                      
-                      # Skip external URLs
-                      if ($destRaw -match '^(?:https?:|mailto:|data:|#|\\)') { continue }
-                      
-                      # Check for double ##
-                      if ($destRaw.Contains('##')) {
-                          $brokenReferences += Add-BrokenReference $relPath ($i + 1) $destRaw "Use single # for fragments." "Link"
-                          continue
-                      }
-                      
-                      # Parse file and fragment
-                      $destParts = $destRaw -split '#', 2
-                      $destNoFragment = $destParts[0]
-                      $fragment = ($destParts.Length -gt 1) ? $destParts[1] : $null
-                      
-                      if ($destNoFragment) {
-                          $leaf = ($destNoFragment -split '[\\/]')[-1]
-                          if ($leaf) {
-                              $targetBase = $leaf.ToLower().EndsWith('.md') ? $leaf.Substring(0, $leaf.Length - 3) : $leaf
-                              $targetBase = $targetBase.Trim()
-                              if ($targetBase) {
-                                  $linkInfo = @{
-                                      TargetBase = $targetBase
-                                      Fragment = $fragment
-                                      Line = $i + 1
-                                      SourceFile = $relPath
-                                  }
-                                  $links += $linkInfo
-                              }
-                          }
-                      }
-                  }
-              }
-              
-              $docIndex[$baseName] = @{ Anchors = $anchors; Links = $links }
-          }
-          
-          # Parse Tab.cpp references
-          if ($hasTabFile) {
-              $regex = 'optgroup->append_single_option_line\s*\(\s*(?:"([^"]+)"|([^,]+?))\s*,\s*"([^"]+)"\s*\)'
-              $lines = Get-Content -Path $tabFile -Encoding UTF8
-              
-              for ($i = 0; $i -lt $lines.Count; $i++) {
-                  foreach ($match in [regex]::Matches($lines[$i], $regex)) {
-                      $arg2Full = $match.Groups[3].Value.Trim()
-                      
-                      if ($arg2Full.Contains('##')) {
-                          $brokenReferences += Add-BrokenReference "Tab.cpp" ($i + 1) $arg2Full "Use single # for fragments." "Link"
-                          continue
-                      }
-                      
-                      $arg2Parts = $arg2Full -split '#', 2
-                      $docBase = $arg2Parts[0].Trim()
-                      $fragment = ($arg2Parts.Length -gt 1) ? $arg2Parts[1].Trim() : $null
-                      
-                      if (-not $docIndex.ContainsKey($docBase)) {
-                          $brokenReferences += Add-BrokenReference "Tab.cpp" ($i + 1) $docBase "File does not exist" "Link"
-                      } elseif ($fragment) {
-                          $validationResult = Validate-Fragment $fragment $docIndex[$docBase].Anchors "Tab.cpp" ($i + 1) "$docBase#$fragment" "Link"
-                          if ($validationResult) { $brokenReferences += $validationResult }
-                      }
-                  }
-              }
-          }
-          
-          # Validate markdown links
-          foreach ($baseName in $docIndex.Keys) {
-              foreach ($link in $docIndex[$baseName].Links) {
-                  if (-not $docIndex.ContainsKey($link.TargetBase)) {
-                      $brokenReferences += Add-BrokenReference $link.SourceFile $link.Line "$($link.TargetBase).md" "File does not exist" "Link"
-                  } elseif ($link.Fragment) {
-                      $validationResult = Validate-Fragment $link.Fragment $docIndex[$link.TargetBase].Anchors $link.SourceFile $link.Line "$($link.TargetBase)#$($link.Fragment)" "Link"
-                      if ($validationResult) { $brokenReferences += $validationResult }
-                  }
-              }
-          }
-          
-          # Validate images
-          Write-Host "Validating images..." -ForegroundColor Blue
-          $expectedUrlPattern = '^https://github\.com/SoftFever/OrcaSlicer/blob/main/([^?]+)\?raw=true$'
-          
-          foreach ($file in $mdFiles) {
-              $lines = Get-Content $file.FullName -Encoding UTF8
-              $relPath = (Resolve-Path $file.FullName).Path.Substring($docDir.Length).TrimStart('\', '/')
-              
-              $inCodeFence = $false
-              for ($lineNumber = 0; $lineNumber -lt $lines.Count; $lineNumber++) {
-                  $line = $lines[$lineNumber]
-                  if ($line.TrimStart() -match '^(```|~~~)') { 
-                      $inCodeFence = -not $inCodeFence
-                      continue 
-                  }
-                  if ($inCodeFence) { continue }
-                  
-                  $lineForParsing = [regex]::Replace($line, '`[^`]*`', '')
-                  
-                  # Process markdown and HTML images
-                  $imagePatterns = @(
-                      @{ Pattern = "!\[([^\]]*)\]\(([^)]+)\)"; Type = "Markdown"; AltGroup = 1; UrlGroup = 2 }
-                      @{ Pattern = '<img\s+[^>]*>'; Type = "HTML"; AltGroup = -1; UrlGroup = -1 }
-                  )
-                  
-                  foreach ($pattern in $imagePatterns) {
-                      foreach ($match in [regex]::Matches($lineForParsing, $pattern.Pattern)) {
-                          $altText = ""
-                          $url = ""
-                          
-                          if ($pattern.Type -eq "Markdown") {
-                              $altText = $match.Groups[$pattern.AltGroup].Value
-                              $url = $match.Groups[$pattern.UrlGroup].Value
-                          } else {
-                              # Extract from HTML
-                              $imgTag = $match.Value
-                              if ($imgTag -match 'alt\s*=\s*[`"'']([^`"'']*)[`"'']') { $altText = $matches[1] }
-                              if ($imgTag -match 'src\s*=\s*[`"'']([^`"'']*)[`"'']') { $url = $matches[1] }
-                          }
-                          
-                          if (-not $altText.Trim() -and $url) {
-                              $brokenReferences += Add-BrokenReference $relPath ($lineNumber + 1) $match.Value "[$($pattern.Type)] Missing alt text for image" "Image"
-                          } elseif ($url -and $altText) {
-                              # Validate URL format and file existence
-                              if ($url -match $expectedUrlPattern) {
-                                  $relativePathInUrl = $matches[1]
-                                  $fileNameFromUrl = [System.IO.Path]::GetFileNameWithoutExtension($relativePathInUrl)
-                                  
-                                  if ($altText -ne $fileNameFromUrl) {
-                                      $brokenReferences += Add-BrokenReference $relPath ($lineNumber + 1) $match.Value "[$($pattern.Type)] Alt text `"$altText`" ≠ filename `"$fileNameFromUrl`"" "Image"
-                                  }
-                                  
-                                  $expectedImagePath = Join-Path $PWD ($relativePathInUrl -replace "/", "\")
-                                  if (-not (Test-Path $expectedImagePath)) {
-                                      $brokenReferences += Add-BrokenReference $relPath ($lineNumber + 1) $match.Value "[$($pattern.Type)] Image not found at path: $relativePathInUrl" "Image"
-                                  }
-                              } else {
-                                  $urlIssues = @()
-                                  if (-not $url.StartsWith('https://github.com/SoftFever/OrcaSlicer/blob/main/')) { $urlIssues += "URL must start with expected prefix" }
-                                  if (-not $url.EndsWith('?raw=true')) { $urlIssues += "URL must end with '?raw=true'" }
-                                  if ($url -match '^https?://(?!github\.com/SoftFever/OrcaSlicer)') { $urlIssues += "External URLs not allowed" }
-                                  
-                                  $issueText = "[$($pattern.Type)] URL format issues: " + ($urlIssues -join '; ')
-                                  $brokenReferences += Add-BrokenReference $relPath ($lineNumber + 1) $match.Value $issueText "Image"
-                              }
-                          }
-                      }
-                  }
-              }
-          }
-          
-          # Report results
-          $linkErrors = $brokenReferences | Where-Object { $_.Type -eq "Link" }
-          $imageErrors = $brokenReferences | Where-Object { $_.Type -eq "Image" }
-          
-          if ($brokenReferences.Count -gt 0) {
-              Write-Host "::error::Documentation validation failed"
-              
-              # Build error summary for PR comment
-              $errorSummary = ""
-              
-              # Report link errors
-              if ($linkErrors) {
-                  Write-Host "::group::🔗 Link Validation Errors"
-                  $errorSummary += "## 🔗 Link Validation Errors`n`n"
-                  $linkErrors | Group-Object SourceFile | ForEach-Object {
-                      Write-Host "📄 $($_.Name):" -ForegroundColor Yellow
-                      $errorSummary += "**📄 doc/$($_.Name):**`n"
-                      $_.Group | Sort-Object Line | ForEach-Object {
-                          Write-Host "  Line $($_.Line): $($_.Target) - $($_.Issue)" -ForegroundColor Red
-                          Write-Host "::error file=doc/$($_.SourceFile),line=$($_.Line)::$($_.Target) - $($_.Issue)"
-                          $errorSummary += "- Line $($_.Line): ``$($_.Target)`` - $($_.Issue)`n"
-                      }
-                      $errorSummary += "`n"
-                  }
-                  Write-Host "::endgroup::"
-              }
-              
-              # Report image errors
-              if ($imageErrors) {
-                  Write-Host "::group::🖼️ Image Validation Errors"
-                  $errorSummary += "## 🖼️ Image Validation Errors`n`n"
-                  $imageErrors | Group-Object SourceFile | ForEach-Object {
-                      Write-Host "📄 $($_.Name):" -ForegroundColor Yellow
-                      $errorSummary += "**📄 doc/$($_.Name):**`n"
-                      $_.Group | Sort-Object Line | ForEach-Object {
-                          Write-Host "  Line $($_.Line): $($_.Issue)" -ForegroundColor Red
-                          Write-Host "::error file=doc/$($_.SourceFile),line=$($_.Line)::$($_.Issue)"
-                          $errorSummary += "- Line $($_.Line): $($_.Issue)`n"
-                      }
-                      $errorSummary += "`n"
-                  }
-                  Write-Host "::endgroup::"
-              }
-              
-              # Export error summary for PR comment
-              Add-Content -Path $env:GITHUB_ENV -Value "VALIDATION_ERRORS<<EOF"
-              Add-Content -Path $env:GITHUB_ENV -Value $errorSummary
-              Add-Content -Path $env:GITHUB_ENV -Value "EOF"
-              
-              exit 1
-          } else {
-              Write-Host "::notice::All documentation is valid!"
-              exit 0
-          }
-      
-      - name: Comment on PR
-        if: failure() && github.event_name == 'pull_request'
-        uses: actions/github-script@v7
-        with:
-          script: |
-            const validationErrors = process.env.VALIDATION_ERRORS || '';
-            
-            const body = `❌ **Documentation validation failed**
-            
-            ${validationErrors || 'Please check the workflow logs for details about the validation errors.'}`;
-            
-            github.rest.issues.createComment({
-              issue_number: context.issue.number,
-              owner: context.repo.owner,
-              repo: context.repo.repo,
-              body: body
-            })

.gitignore

@@ -1,7 +1,7 @@
 Build
 Build.bat
-/build*/
-deps/build*
+/build/
+deps/build
 MYMETA.json
 MYMETA.yml
 _build
@@ -17,23 +17,9 @@ xs/assertlib*
 local-lib
 /src/TAGS
 /.vscode/
-/.vscode
 build-linux/*
-deps/build*/*
+deps/build-linux/*
 **/.DS_Store
-install_*
-build_*/
+install_dir
+install_release
 SVG
-src/OrcaSlicer-doc/
-.idea/
-/.cache/
-*.mo
-**/process_full/
-**/machine_full/
-**/filament_full/
-/deps/DL_CACHE/
-/deps/DL_CACHE
-**/.flatpak-builder/
-resources/profiles/user/default
-*.code-workspace
-deps_src/build/

.idea/.gitignore

@@ -1,8 +0,0 @@
-# Default ignored files
-/shelf/
-/workspace.xml
-# Editor-based HTTP Client requests
-/httpRequests/
-# Datasource local storage ignored files
-/dataSources/
-/dataSources.local.xml

.idea/OrcaSlicer.iml

@@ -1,2 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<module classpath="CMake" type="CPP_MODULE" version="4" />

.idea/codeStyles/Project.xml

@@ -1,7 +0,0 @@
-<component name="ProjectCodeStyleConfiguration">
-  <code_scheme name="Project" version="173">
-    <clangFormatSettings>
-      <option name="ENABLED" value="true" />
-    </clangFormatSettings>
-  </code_scheme>
-</component>

.idea/codeStyles/codeStyleConfig.xml

@@ -1,5 +0,0 @@
-<component name="ProjectCodeStyleConfiguration">
-  <state>
-    <option name="USE_PER_PROJECT_SETTINGS" value="true" />
-  </state>
-</component>

.idea/misc.xml

@@ -1,4 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-  <component name="CMakeWorkspace" PROJECT_DIR="$PROJECT_DIR$" />
-</project>

.idea/modules.xml

@@ -1,8 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-  <component name="ProjectModuleManager">
-    <modules>
-      <module fileurl="file://$PROJECT_DIR$/.idea/OrcaSlicer.iml" filepath="$PROJECT_DIR$/.idea/OrcaSlicer.iml" />
-    </modules>
-  </component>
-</project>

.idea/vcs.xml

@@ -1,6 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project version="4">
-  <component name="VcsDirectoryMappings">
-    <mapping directory="" vcs="Git" />
-  </component>
-</project>

BambuStudio.sublime-project

@@ -0,0 +1,103 @@
+{
+	"build_systems":
+	[
+		{
+			"name": "List",
+   			//"file_regex": " at ([^-\\s]*) line ([0-9]*)",
+//   			"file_regex": " at (D\\:\\/src\\/Slic3r\\/.*?) line ([0-9]*)",
+			"shell_cmd": "ls -l"
+		},
+		{
+			"name": "Run",
+			"working_dir": "$project_path",
+   			"file_regex": " at (.*?) line ([0-9]*)",
+//			"shell_cmd": "chdir & perl slic3r.pl  --DataDir \"C:\\Users\\Public\\Documents\\Prusa3D\\Slic3r settings MK2\" --gui \"..\\Slic3r-tests\\gap fill torture 20 -rt.stl\""
+			"shell_cmd": "chdir & perl slic3r.pl"
+		},
+		{
+			"name": "full",
+   			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"shell_cmd": "chdir & perl Build.pl"
+		},
+		{
+			"name": "xs",
+			"working_dir": "$project_path/build",
+			// for Visual Studio:
+  			"file_regex": "^(..[^:]*)\\(([0-9]+)\\)(.*)$",
+  			// For GCC:
+// 			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"shell_cmd": "chdir & ninja -j 6 -v",
+			"env": {
+//				"PATH": "C:\\Program Files (x86)\\MSBuild\\12.0\\bin\\amd64;C:\\Program Files (x86)\\Microsoft Visual Studio 12.0\\VC\\BIN\\amd64;C:\\Program Files (x86)\\Microsoft Visual Studio 12.0\\Common7\\IDE;C:\\Program Files (x86)\\Microsoft Visual Studio 12.0\\Common7\\Tools;%PATH%;c:\\wperl64d\\site\\bin;c:\\wperl64d\\bin",
+//				"PERL_CPANM_HOME": "c:\\wperl64d\\cpanm",
+//				"WXDIR": "D:\\src-perl\\wxWidgets-3.0.3-beta1",
+//				"BOOST_DIR": "D:\\src-perl\\boost_1_61_0",
+//				"BOOST_INCLUDEDIR": "D:\\src-perl\\boost_1_61_0",
+//				"BOOST_LIBRARYDIR": "D:\\src-perl\\boost_1_61_0\\stage\\x64\\lib",
+//				"SLIC3R_STATIC": "1"
+			}
+		},
+		{
+			"name": "xs & run",
+			"working_dir": "$project_path/build",
+  			"file_regex": "^(..[^:]*):([0-9]+):?([0-9]+)?:? (.*)$",
+			"shell_cmd": "chdir & ninja -j 6 & cd .. & perl slic3r.pl --gui \"..\\Slic3r-tests\\star3-big2.stl\""
+		},
+		{
+			"name": "Slic3r - clean",
+			"working_dir": "$project_path/build",
+			"file_regex": "^(..[^:]*)(?::|\\()([0-9]+)(?::|\\))(?:([0-9]+):)?\\s*(.*)",
+			"shell_cmd": ["chdir & ninja clean"]
+		},
+		{
+			"name": "run tests",
+			"working_dir": "$project_path/build",
+			// for Visual Studio:
+  			"file_regex": "^(..[^:]*)\\(([0-9]+)\\)(.*)$",
+			"shell_cmd": "chdir & ctest --verbose"
+		},
+		{
+			"name": "Clean & Configure",
+			"working_dir": "$project_path",
+			// for Visual Studio:
+			"file_regex": "^(..[^:]*)(?::|\\()([0-9]+)(?::|\\))(?:([0-9]+):)?\\s*(.*)",
+			"shell_cmd": "chdir & rmdir /S /Q build & mkdir build & cd build & cmake -G Ninja .. -DCMAKE_COLOR_MAKEFILE=OFF -DCMAKE_RULE_PROGRESS=OFF  -DCMAKE_RULE_MESSAGES=OFF -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_BUILD_TYPE=RelWithDebInfo"
+		},
+		{
+			"name": "Configure",
+			"working_dir": "$project_path/build",
+			// for Visual Studio:
+			"file_regex": "^(..[^:]*)(?::|\\()([0-9]+)(?::|\\))(?:([0-9]+):)?\\s*(.*)",
+			"shell_cmd": "cmake -G Ninja .. -DCMAKE_COLOR_MAKEFILE=OFF -DCMAKE_RULE_PROGRESS=OFF  -DCMAKE_RULE_MESSAGES=OFF -DCMAKE_VERBOSE_MAKEFILE=ON -DCMAKE_BUILD_TYPE=RelWithDebInfo"
+		}
+	],
+	"folders":
+	[
+		{
+			"path": ".",
+//	        "folder_exclude_patterns": [".svn", "._d", ".metadata", ".settings"],
+	        "file_exclude_patterns": ["XS.c", "*.pch", "*.ilk", "*.js" ]
+		}
+	],
+
+    "settings":
+    {
+        "sublimegdb_workingdir": "${folder:${project_path:run}}",
+  		// NOTE: You MUST provide --interpreter=mi for the plugin to work
+//    	"sublimegdb_commandline": "D:\\Qt\\Tools\\mingw492_32\\bin\\gdb.exe --interpreter=mi -ex 'target localhost:2345'",
+//    	"sublimegdb_commandline": "D:\\Qt\\Tools\\mingw492_32\\bin\\gdb.exe --interpreter=mi perl --args perl slic3r.pl",
+//    	"sublimegdb_commandline": "D:\\Qt\\Tools\\mingw492_32\\bin\\gdb.exe --interpreter=mi perl --args slic3r.pl ",
+//    	"sublimegdb_commandline": "D:\\Qt\\Tools\\mingw492_32\\bin\\gdb.exe --interpreter=mi -e C:\\Strawberry\\perl\\bin\\perl.exe -s C:\\Strawberry\\perl\\site\\lib\\auto\\Slic3r\\XS\\XS.xs.dll --args perl slic3r.pl -j 1 --gui D:\\src\\Slic3r-tests\\star3-big.stl",
+    	"sublimegdb_commandline": "D:\\Qt\\Tools\\mingw492_32\\bin\\gdb.exe --interpreter=mi perl.exe --args perl slic3r.pl -j 1 --gui", //  D:\\src\\Slic3r-tests\\star3-big.stl",
+//    	"sublimegdb_commandline": "D:\\Qt\\Tools\\mingw492_32\\bin\\gdb.exe --interpreter=mi -x slic3r.gdb",
+//    	"arguments": "slic3r -j 1 --gui ../Slic3r-tests/star3-big.stl",
+//	  	"arguments": "../slic3r.pl -j 1 --gui",
+//        "sublimegdb_exec_cmd": "-exec-continue",
+    	
+    	// Add "pending breakpoints" for symbols that are dynamically loaded from
+    	// external shared libraries
+    	"debug_ext" : true,
+    	"run_after_init": false,
+    	"close_views": false
+    }
+}

Build.PL

@@ -0,0 +1,132 @@
+#!/usr/bin/perl
+
+print "This script is currently used for installing Perl dependenices for running\n";
+print "the libslic3r unit / integration tests through Perl prove.\n";
+print "If you don't plan to run the unit / integration tests, you don't need to\n";
+print "install these dependencies to build and run BambuSlicer.\n";
+
+use strict;
+use warnings;
+
+use Config;
+use File::Spec;
+
+my %prereqs = qw(
+    Devel::CheckLib                 0
+    ExtUtils::MakeMaker             6.80
+    ExtUtils::ParseXS               3.22
+    ExtUtils::XSpp                  0
+    ExtUtils::XSpp::Cmd             0
+    ExtUtils::CppGuess              0
+    ExtUtils::Typemaps              0
+    ExtUtils::Typemaps::Basic       0
+    File::Basename                  0
+    File::Spec                      0
+    Getopt::Long                    0
+    Module::Build::WithXSpp         0.14
+    Moo                             1.003001
+    POSIX                           0
+    Scalar::Util                    0
+    Test::More                      0
+    IO::Scalar                      0
+    Time::HiRes                     0
+);
+my %recommends = qw(
+    Class::XSAccessor               0
+    Test::Harness                   0
+);
+
+my $sudo    = grep { $_ eq '--sudo' } @ARGV;
+my $nolocal = grep { $_ eq '--nolocal' }  @ARGV;
+
+my @missing_prereqs = ();
+if ($ENV{SLIC3R_NO_AUTO}) {
+    foreach my $module (sort keys %prereqs) {
+        my $version = $prereqs{$module};
+        next if eval "use $module $version; 1";
+        push @missing_prereqs, $module if exists $prereqs{$module};
+        print "Missing prerequisite $module $version\n";
+    }
+    foreach my $module (sort keys %recommends) {
+        my $version = $recommends{$module};
+        next if eval "use $module $version; 1";
+        print "Missing optional $module $version\n";
+    }
+} else {
+    my @try = (
+        $ENV{CPANM} // (),
+        File::Spec->catfile($Config{sitebin}, 'cpanm'),
+        File::Spec->catfile($Config{installscript}, 'cpanm'),
+    );
+    
+    my $cpanm;
+    foreach my $path (@try) {
+        if (-e $path) {  # don't use -x because it fails on Windows
+            $cpanm = $path;
+            last;
+        }
+    }
+    if (!$cpanm) {
+        if ($^O =~ /^(?:darwin|linux)$/ && system(qw(which cpanm)) == 0) {
+            $cpanm = 'cpanm';
+        }
+    }
+    die <<'EOF'
+cpanm was not found. Please install it before running this script.
+
+There are several ways to install cpanm, try one of these:
+
+    apt-get install cpanminus
+    curl -L http://cpanmin.us | perl - --sudo App::cpanminus
+    cpan App::cpanminus
+
+If it is installed in a non-standard location you can do:
+    
+    CPANM=/path/to/cpanm perl Build.PL
+
+EOF
+        if !$cpanm;
+    my @cpanm_args = ();
+    push @cpanm_args, "--sudo" if $sudo;
+
+    # install local::lib without --local-lib otherwise it's not usable afterwards
+    if (!eval "use local::lib qw(local-lib); 1") {
+        my $res = system $cpanm, @cpanm_args, 'local::lib';
+        warn "Warning: local::lib is required. You might need to run the `cpanm --sudo local::lib` command in order to install it.\n"
+            if $res != 0;
+    }
+    
+    push @cpanm_args, ('--local-lib', 'local-lib') if ! $nolocal;
+
+    # make sure our cpanm is updated (old ones don't support the ~ syntax)
+    system $cpanm, @cpanm_args, 'App::cpanminus';
+    
+    my %modules = (%prereqs, %recommends);
+    foreach my $module (sort keys %modules) {
+        my $version = $modules{$module};
+        my @cmd = ($cpanm, @cpanm_args);
+        
+        # temporary workaround for upstream bug in test
+        push @cmd, '--notest'
+            if $module =~ /^(?:OpenGL|Test::Harness)$/;
+        
+        push @cmd, "$module~$version";
+
+        my $res = system @cmd;
+        if ($res != 0) {
+            if (exists $prereqs{$module}) {
+                push @missing_prereqs, $module;
+            } else {
+                printf "Don't worry, this module is optional.\n";
+            }
+        }
+    }
+}
+
+print "\n";
+print "In the next step, you need to build the BambuStudio C++ library.\n";
+print "1) Create a build directory and change to it\n";
+print "2) run cmake .. -DCMAKE_BUILD_TYPE=Release\n";
+print "3) run make\n";
+print "4) to execute the automatic tests, run ctest --verbose\n";
+__END__

CLAUDE.md

@@ -1,257 +0,0 @@
-# CLAUDE.md
-
-This file provides guidance to Claude Code (claude.ai/code) when working with code in this repository.
-
-## Overview
-
-OrcaSlicer is an open-source 3D slicer application forked from Bambu Studio, built using C++ with wxWidgets for the GUI and CMake as the build system. The project uses a modular architecture with separate libraries for core slicing functionality, GUI components, and platform-specific code.
-
-## Build Commands
-
-### Building on Windows
-```bash
-# Build everything
-build_release_vs2022.bat
-
-# Build with debug symbols
-build_release_vs2022.bat debug
-
-# Build only dependencies
-build_release_vs2022.bat deps
-
-# Build only slicer (after deps are built)
-build_release_vs2022.bat slicer
-
-
-```
-
-### Building on macOS
-```bash
-# Build everything (dependencies and slicer)
-./build_release_macos.sh
-
-# Build only dependencies
-./build_release_macos.sh -d
-
-# Build only slicer (after deps are built)
-./build_release_macos.sh -s
-
-# Use Ninja generator for faster builds
-./build_release_macos.sh -x
-
-# Build for specific architecture
-./build_release_macos.sh -a arm64    # or x86_64 or universal
-
-# Build for specific macOS version target
-./build_release_macos.sh -t 11.3
-```
-
-### Building on Linux
-```bash
-# First time setup - install system dependencies
-./build_linux.sh -u
-
-# Build dependencies and slicer
-./build_linux.sh -dsi
-
-# Build everything (alternative)
-./build_linux.sh -dsi
-
-# Individual options:
-./build_linux.sh -d    # dependencies only
-./build_linux.sh -s    # slicer only  
-./build_linux.sh -i    # build AppImage
-
-# Performance and debug options:
-./build_linux.sh -j N  # limit to N cores
-./build_linux.sh -1    # single core build
-./build_linux.sh -b    # debug build
-./build_linux.sh -c    # clean build
-./build_linux.sh -r    # skip RAM/disk checks
-./build_linux.sh -l    # use Clang instead of GCC
-```
-
-### Build System
-- Uses CMake with minimum version 3.13 (maximum 3.31.x on Windows)
-- Primary build directory: `build/`
-- Dependencies are built in `deps/build/`
-- The build process is split into dependency building and main application building
-- Windows builds use Visual Studio generators
-- macOS builds use Xcode by default, Ninja with -x flag
-- Linux builds use Ninja generator
-
-### Testing
-Tests are located in the `tests/` directory and use the Catch2 testing framework. Test structure:
-- `tests/libslic3r/` - Core library tests (21 test files)
-  - Geometry processing, algorithms, file formats (STL, 3MF, AMF)
-  - Polygon operations, clipper utilities, Voronoi diagrams
-- `tests/fff_print/` - Fused Filament Fabrication tests (12 test files)
-  - Slicing algorithms, G-code generation, print mechanics
-  - Fill patterns, extrusion, support material
-- `tests/sla_print/` - Stereolithography tests (4 test files)
-  - SLA-specific printing algorithms, support generation
-- `tests/libnest2d/` - 2D nesting algorithm tests
-- `tests/slic3rutils/` - Utility function tests
-- `tests/sandboxes/` - Experimental/sandbox test code
-
-Run all tests after building:
-```bash
-cd build && ctest
-```
-
-Run tests with verbose output:
-```bash
-cd build && ctest --output-on-failure
-```
-
-Run individual test suites:
-```bash
-# From build directory
-./tests/libslic3r/libslic3r_tests
-./tests/fff_print/fff_print_tests
-./tests/sla_print/sla_print_tests
-```
-
-## Architecture
-
-### Core Libraries
-- **libslic3r/**: Core slicing engine and algorithms (platform-independent)
-  - Main slicing logic, geometry processing, G-code generation
-  - Key classes: Print, PrintObject, Layer, GCode, Config
-  - Modular design with specialized subdirectories:
-    - `GCode/` - G-code generation, cooling, pressure equalization, thumbnails
-    - `Fill/` - Infill pattern implementations (gyroid, honeycomb, lightning, etc.)
-    - `Support/` - Tree supports and traditional support generation
-    - `Geometry/` - Advanced geometry operations, Voronoi diagrams, medial axis
-    - `Format/` - File I/O for 3MF, AMF, STL, OBJ, STEP formats
-    - `SLA/` - SLA-specific print processing and support generation
-    - `Arachne/` - Advanced wall generation using skeletal trapezoidation
-
-- **src/slic3r/**: Main application framework and GUI
-  - GUI application built with wxWidgets
-  - Integration between libslic3r core and user interface
-  - Located in `src/slic3r/GUI/` (not shown in this directory but exists)
-
-### Key Algorithmic Components
-- **Arachne Wall Generation**: Variable-width perimeter generation using skeletal trapezoidation
-- **Tree Supports**: Organic support generation algorithm  
-- **Lightning Infill**: Sparse infill optimization for internal structures
-- **Adaptive Slicing**: Variable layer height based on geometry
-- **Multi-material**: Multi-extruder and soluble support processing
-- **G-code Post-processing**: Cooling, fan control, pressure advance, conflict checking
-
-### File Format Support
-- **3MF/BBS_3MF**: Native format with extensions for multi-material and metadata
-- **STL**: Standard tessellation language for 3D models
-- **AMF**: Additive Manufacturing Format with color/material support  
-- **OBJ**: Wavefront OBJ with material definitions
-- **STEP**: CAD format support for precise geometry
-- **G-code**: Output format with extensive post-processing capabilities
-
-### External Dependencies
-- **Clipper2**: Advanced 2D polygon clipping and offsetting
-- **libigl**: Computational geometry library for mesh operations
-- **TBB**: Intel Threading Building Blocks for parallelization
-- **wxWidgets**: Cross-platform GUI framework
-- **OpenGL**: 3D graphics rendering and visualization
-- **CGAL**: Computational Geometry Algorithms Library (selective use)
-- **OpenVDB**: Volumetric data structures for advanced operations
-- **Eigen**: Linear algebra library for mathematical operations
-
-## File Organization
-
-### Resources and Configuration
-- `resources/profiles/` - Printer and material profiles organized by manufacturer
-- `resources/printers/` - Printer-specific configurations and G-code templates  
-- `resources/images/` - UI icons, logos, calibration images
-- `resources/calib/` - Calibration test patterns and data
-- `resources/handy_models/` - Built-in test models (benchy, calibration cubes)
-
-### Internationalization and Localization  
-- `localization/i18n/` - Source translation files (.pot, .po)
-- `resources/i18n/` - Runtime language resources
-- Translation managed via `scripts/run_gettext.sh` / `scripts/run_gettext.bat`
-
-### Platform-Specific Code
-- `src/libslic3r/Platform.cpp` - Platform abstractions and utilities
-- `src/libslic3r/MacUtils.mm` - macOS-specific utilities (Objective-C++)
-- Windows-specific build scripts and configurations
-- Linux distribution support scripts in `scripts/linux.d/`
-
-### Build and Development Tools
-- `cmake/modules/` - Custom CMake find modules and utilities
-- `scripts/` - Python utilities for profile generation and validation  
-- `tools/` - Windows build tools (gettext utilities)
-- `deps/` - External dependency build configurations
-
-## Development Workflow
-
-### Code Style and Standards
-- **C++17 standard** with selective C++20 features
-- **Naming conventions**: PascalCase for classes, snake_case for functions/variables
-- **Header guards**: Use `#pragma once` 
-- **Memory management**: Prefer smart pointers, RAII patterns
-- **Thread safety**: Use TBB for parallelization, be mindful of shared state
-
-### Common Development Tasks
-
-#### Adding New Print Settings
-1. Define setting in `PrintConfig.cpp` with proper bounds and defaults
-2. Add UI controls in appropriate GUI components  
-3. Update serialization in config save/load
-4. Add tooltips and help text for user guidance
-5. Test with different printer profiles
-
-#### Modifying Slicing Algorithms  
-1. Core algorithms live in `libslic3r/` subdirectories
-2. Performance-critical code should be profiled and optimized
-3. Consider multi-threading implications (TBB integration)
-4. Validate changes don't break existing profiles
-5. Add regression tests where appropriate
-
-#### GUI Development
-1. GUI code resides in `src/slic3r/GUI/` (not visible in current tree)
-2. Use existing wxWidgets patterns and custom controls
-3. Support both light and dark themes
-4. Consider DPI scaling on high-resolution displays
-5. Maintain cross-platform compatibility
-
-#### Adding Printer Support
-1. Create JSON profile in `resources/profiles/[manufacturer].json`
-2. Add printer-specific start/end G-code templates
-3. Configure build volume, capabilities, and material compatibility
-4. Test thoroughly with actual hardware when possible
-5. Follow existing profile structure and naming conventions
-
-### Dependencies and Build System
-- **CMake-based** with separate dependency building phase
-- **Dependencies** built once in `deps/build/`, then linked to main application  
-- **Cross-platform** considerations important for all changes
-- **Resource files** embedded at build time, platform-specific handling
-
-### Performance Considerations
-- **Slicing algorithms** are CPU-intensive, profile before optimizing
-- **Memory usage** can be substantial with complex models
-- **Multi-threading** extensively used via TBB
-- **File I/O** optimized for large 3MF files with embedded textures
-- **Real-time preview** requires efficient mesh processing
-
-## Important Development Notes
-
-### Codebase Navigation
-- Use search tools extensively - codebase has 500k+ lines
-- Key entry points: `src/OrcaSlicer.cpp` for application startup
-- Core slicing: `libslic3r/Print.cpp` orchestrates the slicing pipeline
-- Configuration: `PrintConfig.cpp` defines all print/printer/material settings
-
-### Compatibility and Stability
-- **Backward compatibility** maintained for project files and profiles
-- **Cross-platform** support essential (Windows/macOS/Linux)  
-- **File format** changes require careful version handling
-- **Profile migrations** needed when settings change significantly
-
-### Quality and Testing
-- **Regression testing** important due to algorithm complexity
-- **Performance benchmarks** help catch performance regressions
-- **Memory leak** detection important for long-running GUI application
-- **Cross-platform** testing required before releases

CMakeLists.txt

@@ -1,59 +1,5 @@
 cmake_minimum_required(VERSION 3.13)
-
-# Verify that your CMake version is exactly 3.31.x series or lower on windows
-if ( ((MSVC) OR (WIN32)) AND (${CMAKE_VERSION} VERSION_GREATER_EQUAL "4.0") )
-    message(FATAL_ERROR "Only cmake versions between 3.13.x and 3.31.x is supported on windows. Detected version: ${CMAKE_VERSION}")
-endif()
-
-if (WIN32)
-    # Detect known CI environments
-    set(IS_CI FALSE)
-    if(DEFINED ENV{CI})
-        set(IS_CI TRUE)
-    elseif(DEFINED ENV{GITHUB_ACTIONS})
-        set(IS_CI TRUE)
-    elseif(DEFINED ENV{GITLAB_CI})
-        set(IS_CI TRUE)
-    elseif(DEFINED ENV{TF_BUILD})
-        set(IS_CI TRUE)
-    elseif(DEFINED ENV{BUILD_NUMBER}) # Jenkins
-        set(IS_CI TRUE)
-    endif()
-
-    # Detect common misconfiguration (Strawberry Perl in PATH before CMake)
-    # We use ENV to check the PATH order
-    string(REPLACE "\\" "/" ENV_PATH "$ENV{PATH}")
-    string(FIND "${ENV_PATH}" "Strawberry/c/bin" STRAWBERRY_POS)
-    string(FIND "${ENV_PATH}" "Program Files/CMake/bin" CMAKE_POS)
-
-    if (STRAWBERRY_POS GREATER -1 AND CMAKE_POS GREATER -1 AND STRAWBERRY_POS LESS CMAKE_POS)
-        set(_warning_text "
-#############################################################
-Detected Strawberry Perl's 'c/bin' appearing before CMake in PATH.
-This is known to cause CMake to misbehave (e.g., missing modules).
-Please adjust your PATH so that:
-C:\\Program Files\\CMake\\bin
-appears before:
-C:\\Strawberry\\c\\bin
-You can do this in Environment Variables settings.
-#############################################################
-        ")
-
-        if(NOT IS_CI)
-            message(FATAL_ERROR "${_warning_text}")
-        endif()
-    endif()
-endif ()
-
-if (APPLE)
-    # if CMAKE_OSX_DEPLOYMENT_TARGET is not set, set it to 11.3
-    if (NOT CMAKE_OSX_DEPLOYMENT_TARGET)
-        set(CMAKE_OSX_DEPLOYMENT_TARGET "11.3" CACHE STRING "Minimum OS X deployment version" FORCE)
-    endif ()
-    message(STATUS "CMAKE_OSX_DEPLOYMENT_TARGET: ${CMAKE_OSX_DEPLOYMENT_TARGET}")
-endif ()
-
-project(OrcaSlicer)
+project(BambuStudio)
 
 include("version.inc")
 include(GNUInstallDirs)
@@ -67,18 +13,6 @@ if (NOT CMAKE_BUILD_TYPE AND NOT CMAKE_CONFIGURATION_TYPES)
   set(CMAKE_BUILD_TYPE "Release" CACHE STRING "Build type (default Release)" FORCE)
 endif()
 
-find_package(Git)
-if(GIT_FOUND AND EXISTS "${CMAKE_SOURCE_DIR}/.git")
-    # Check current Git commit hash
-    execute_process(
-        COMMAND ${GIT_EXECUTABLE} log -1 --format=%h
-        WORKING_DIRECTORY ${CMAKE_SOURCE_DIR}
-        OUTPUT_VARIABLE GIT_COMMIT_HASH
-        OUTPUT_STRIP_TRAILING_WHITESPACE
-    )
-    add_definitions("-DGIT_COMMIT_HASH=\"${GIT_COMMIT_HASH}\"")
-endif()
-
 if(DEFINED ENV{SLIC3R_STATIC})
         set(SLIC3R_STATIC_INITIAL $ENV{SLIC3R_STATIC})
 else()
@@ -89,11 +23,11 @@ else()
         endif()
 endif()
 
-option(SLIC3R_STATIC 			"Compile OrcaSlicer with static libraries (Boost, TBB, glew)" ${SLIC3R_STATIC_INITIAL})
-option(SLIC3R_GUI    			"Compile OrcaSlicer with GUI components (OpenGL, wxWidgets)" 1)
-option(SLIC3R_FHS               "Assume OrcaSlicer is to be installed in a FHS directory structure" 0)
+option(SLIC3R_STATIC 			"Compile BambuStudio with static libraries (Boost, TBB, glew)" ${SLIC3R_STATIC_INITIAL})
+option(SLIC3R_GUI    			"Compile BambuStudio with GUI components (OpenGL, wxWidgets)" 1)
+option(SLIC3R_FHS               "Assume BambuStudio is to be installed in a FHS directory structure" 0)
 option(SLIC3R_WX_STABLE         "Build against wxWidgets stable (3.0) as oppsed to dev (3.1) on Linux" 0)
-option(SLIC3R_PROFILE 			"Compile OrcaSlicer with an invasive Shiny profiler" 0)
+option(SLIC3R_PROFILE 			"Compile BambuStudio with an invasive Shiny profiler" 0)
 option(SLIC3R_PCH               "Use precompiled headers" 1)
 option(SLIC3R_MSVC_COMPILE_PARALLEL "Compile on Visual Studio in parallel" 1)
 option(SLIC3R_MSVC_PDB          "Generate PDB files on MSVC in Release mode" 1)
@@ -108,14 +42,6 @@ set(SLIC3R_GTK "2" CACHE STRING "GTK version to use with wxWidgets on Linux")
 
 set(IS_CROSS_COMPILE FALSE)
 
-option (COLORED_OUTPUT "Always produce ANSI-colored output (GNU/Clang only)." OFF)
-if (${COLORED_OUTPUT})
-    if ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
-        add_compile_options (-fdiagnostics-color=always)
-    elseif ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang")
-        add_compile_options (-fcolor-diagnostics)
-    endif ()
-endif ()
 
 if (APPLE)
     set(CMAKE_FIND_FRAMEWORK LAST)
@@ -127,20 +53,16 @@ if (APPLE)
     if (CMAKE_MACOSX_BUNDLE)
         set(CMAKE_INSTALL_RPATH @executable_path/../Frameworks)
     endif()
-    SET(CMAKE_XCODE_ATTRIBUTE_PRODUCT_BUNDLE_IDENTIFIER "com.softfever3d.orca-slicer")
-
-    message(STATUS "Orca: IS_CROSS_COMPILE: ${IS_CROSS_COMPILE}")
 endif ()
 
 # Proposal for C++ unit tests and sandboxes
 option(SLIC3R_BUILD_SANDBOXES   "Build development sandboxes" OFF)
-option(BUILD_TESTS       "Build unit tests" OFF)
-option(ORCA_TOOLS       "Build Orca tools" OFF)
+option(SLIC3R_BUILD_TESTS       "Build unit tests" OFF)
 
 if (IS_CROSS_COMPILE)
     message("Detected cross compilation setup. Tests and encoding checks will be forcedly disabled!")
     set(SLIC3R_PERL_XS OFF CACHE BOOL "" FORCE)
-    set(BUILD_TESTS OFF CACHE BOOL "" FORCE)
+    set(SLIC3R_BUILD_TESTS OFF CACHE BOOL "" FORCE)
 endif ()
 
 # Print out the SLIC3R_* cache options
@@ -187,21 +109,14 @@ if (MSVC)
     # C4244: 'conversion' conversion from 'type1' to 'type2', possible loss of data. An integer type is converted to a smaller integer type.
     # C4267: The compiler detected a conversion from size_t to a smaller type.
     add_compile_options(/wd4244 /wd4267)
-    # Disable warnings on comparison of unsigned and signed
-    # C4018: signed/unsigned mismatch
-    add_compile_options(/wd4018)
 endif ()
 
-if (${CMAKE_CXX_COMPILER_ID} STREQUAL "AppleClang" AND ${CMAKE_CXX_COMPILER_VERSION} VERSION_GREATER 15)
-    add_compile_definitions(BOOST_NO_CXX98_FUNCTION_BASE _HAS_AUTO_PTR_ETC=0)
-endif()
-
 if (MINGW)
     add_compile_options(-Wa,-mbig-obj)
 endif ()
 
 if (NOT MSVC)
-    # ARMs (Raspberry PI) use an unsigned char by default. Let's make it consistent for OrcaSlicer on all platforms.
+    # ARMs (Raspberry PI) use an unsigned char by default. Let's make it consistent for BambuStudio on all platforms.
     add_compile_options(-fsigned-char)
 endif ()
 
@@ -236,7 +151,7 @@ set(CMAKE_CXX_STANDARD_REQUIRED ON)
 
 if(NOT WIN32)
     # Add DEBUG flags to debug builds.
-    add_compile_definitions("$<IF:$<CONFIG:Debug>,DEBUG,NDEBUG>")
+    add_compile_options("$<$<CONFIG:DEBUG>:-DDEBUG>")
 endif()
 
 # To be able to link libslic3r with the Perl XS module.
@@ -273,7 +188,7 @@ if(WIN32)
     if(WIN10SDK_INCLUDE_PATH)
         message("Building with Win10 Netfabb STL fixing service support")
         add_definitions(-DHAS_WIN10SDK)
-        include_directories(SYSTEM "${WIN10SDK_INCLUDE_PATH}")
+        include_directories("${WIN10SDK_INCLUDE_PATH}")
     else()
         message("Building without Win10 Netfabb STL fixing service support")
     endif()
@@ -301,7 +216,7 @@ if (CMAKE_SYSTEM_NAME STREQUAL "Linux")
     find_package(Threads REQUIRED)
 
     find_package(DBus REQUIRED)
-    include_directories(SYSTEM ${DBUS_INCLUDE_DIRS})
+    include_directories(${DBUS_INCLUDE_DIRS})
 endif()
 
 if (CMAKE_COMPILER_IS_GNUCC OR CMAKE_COMPILER_IS_GNUXX)
@@ -318,22 +233,6 @@ if (NOT MSVC AND ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" OR "${CMAKE_CXX_COMP
     # On GCC and Clang, no return from a non-void function is a warning only. Here, we make it an error.
     add_compile_options(-Werror=return-type)
 
-    # Since some portions of code are just commented out or put under conditional compilation, there are
-    # a bunch of warning related to unused functions and variables. Suppress those warnings to not pollute
-    # compilers diagnostics output with warnings we not going to look at
-    add_compile_options(-Wno-unused-function -Wno-unused-variable -Wno-unused-but-set-variable -Wno-unused-label -Wno-unused-local-typedefs)
-
-    # Ignore signed/unsigned comparison warnings
-    add_compile_options(-Wno-sign-compare)
-
-    # The mismatch of tabs and spaces throughout the project can sometimes
-    # cause this warning to appear even though the indentation is fine.
-    # Some includes also cause the warning
-    add_compile_options(-Wno-misleading-indentation)
-
-    # Disable warning if enum value does not have a corresponding case in switch statement
-    add_compile_options(-Wno-switch)
-
     # removes LOTS of extraneous Eigen warnings (GCC only supports it since 6.1)
     # https://eigen.tuxfamily.org/bz/show_bug.cgi?id=1221
     if("${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang" OR CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 6.0)
@@ -347,31 +246,14 @@ if (NOT MSVC AND ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" OR "${CMAKE_CXX_COMP
         add_compile_options(-Wno-deprecated-declarations)
     endif()
 
-    if((${CMAKE_CXX_COMPILER_ID} STREQUAL "Clang" OR ${CMAKE_CXX_COMPILER_ID} STREQUAL "AppleClang") AND ${CMAKE_CXX_COMPILER_VERSION} VERSION_GREATER 15)
-        add_compile_options(-Wno-error=enum-constexpr-conversion)
-    endif()
-
     #GCC generates loads of -Wunknown-pragmas when compiling igl. The fix is not easy due to a bug in gcc, see
     # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66943 or
     # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53431
     # We will turn the warning of for GCC for now:
     if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
-        # GCC generates loads of -Wunknown-pragmas when compiling igl. The fix is not easy due to a bug in gcc, see
-        # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=66943 or
-        # https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53431
-        # We will turn the warning of for GCC for now:
         add_compile_options(-Wno-unknown-pragmas)
     endif()
 
-    # Bit of a hack for flatpak building: compress the debug info with zstd to save space in CI
-    if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" AND CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 13.0)
-        add_compile_options(-gz=zstd)
-    endif()
-
-    if("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" AND CMAKE_CXX_COMPILER_VERSION VERSION_GREATER 14)
-        set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Wno-error=template-id-cdtor" )
-    endif()
-
 endif()
 
 if (SLIC3R_ASAN)
@@ -384,8 +266,6 @@ if (SLIC3R_ASAN)
         set(CMAKE_EXE_LINKER_FLAGS "${CMAKE_EXE_LINKER_FLAGS} -fsanitize=address")
         set(CMAKE_SHARED_LINKER_FLAGS "${CMAKE_SHARED_LINKER_FLAGS} -fsanitize=address")
         set(CMAKE_MODULE_LINKER_FLAGS "${CMAKE_MODULE_LINKER_FLAGS} -fsanitize=address")
-    else()
-        add_compile_definitions(_DISABLE_STRING_ANNOTATION=1 _DISABLE_VECTOR_ANNOTATION=1)
     endif ()
 
     if ("${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU")
@@ -398,11 +278,6 @@ if (APPLE)
     set(CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} -Werror=partial-availability -Werror=unguarded-availability -Werror=unguarded-availability-new")
 endif ()
 
-if(MSVC)
-# 添加编译选项，忽略警告 C4305 （格式转换截断）
-add_compile_options(/wd4305)
-endif()
-
 # Where all the bundled libraries reside?
 set(LIBDIR ${CMAKE_CURRENT_SOURCE_DIR}/src)
 set(LIBDIR_BIN ${CMAKE_CURRENT_BINARY_DIR}/src)
@@ -410,18 +285,18 @@ message(STATUS "LIBDIR: ${LIBDIR}")
 message(STATUS "LIBDIR_BIN: ${LIBDIR_BIN}")
 
 # For the bundled boost libraries (boost::nowide)
-include_directories(SYSTEM ${LIBDIR})
+include_directories(${LIBDIR})
 # For generated header files
-include_directories(SYSTEM ${LIBDIR_BIN}/dev-utils/platform)
+include_directories(${LIBDIR_BIN}/platform)
 # For ligigl
-include_directories(SYSTEM ${LIBDIR}/libigl)
+include_directories(${LIBDIR}/libigl)
 
 if(WIN32)
     add_definitions(-D_USE_MATH_DEFINES -D_WIN32 -D_CRT_SECURE_NO_WARNINGS -D_SCL_SECURE_NO_WARNINGS)
     if(MSVC)
         # BOOST_ALL_NO_LIB: Avoid the automatic linking of Boost libraries on Windows. Rather rely on explicit linking.
-        add_definitions(-DBOOST_ALL_NO_LIB -DBOOST_USE_WINAPI_VERSION=0x602 -DBOOST_SYSTEM_USE_UTF8 )
-        # Force the source code encoding to UTF-8. See OrcaSlicer GH pull request #5583
+        add_definitions(-DBOOST_ALL_NO_LIB -DBOOST_USE_WINAPI_VERSION=0x601 -DBOOST_SYSTEM_USE_UTF8 )
+        # Force the source code encoding to UTF-8. See BambuStudio GH pull request #5583
         add_compile_options("$<$<C_COMPILER_ID:MSVC>:/utf-8>")
         add_compile_options("$<$<CXX_COMPILER_ID:MSVC>:/utf-8>")
     endif(MSVC)
@@ -433,61 +308,38 @@ add_definitions(-DwxUSE_UNICODE -D_UNICODE -DUNICODE -DWXINTL_NO_GETTEXT_MACRO)
 add_definitions(-DwxNO_UNSAFE_WXSTRING_CONV)
 
 if (SLIC3R_PROFILE)
-    message("OrcaSlicer will be built with a Shiny invasive profiler")
+    message("BambuStudio will be built with a Shiny invasive profiler")
     add_definitions(-DSLIC3R_PROFILE)
 endif ()
 
-# Disable optimization for RelWithDebInfo
-if(CMAKE_C_FLAGS_RELWITHDEBINFO MATCHES "/O2")
-    string(REGEX REPLACE "/O2" "/Od" CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO}")
+# Disable optimization even with debugging on.
+if (0)
+    message(STATUS "Perl compiled without optimization. Disabling optimization for the BambuStudio build.")
+    message("Old CMAKE_CXX_FLAGS_RELEASE: ${CMAKE_CXX_FLAGS_RELEASE}")
+    message("Old CMAKE_CXX_FLAGS_RELWITHDEBINFO: ${CMAKE_CXX_FLAGS_RELEASE}")
+    message("Old CMAKE_CXX_FLAGS: ${CMAKE_CXX_FLAGS_RELEASE}")
+    set(CMAKE_CXX_FLAGS_RELEASE "/MD /Od /Zi /EHsc /DWIN32 /DTBB_USE_ASSERT")
+    set(CMAKE_C_FLAGS_RELEASE "/MD /Od /Zi /DWIN32 /DTBB_USE_ASSERT")
+    set(CMAKE_CXX_FLAGS_RELWITHDEBINFO "/MD /Od /Zi /EHsc /DWIN32 /DTBB_USE_ASSERT")
+    set(CMAKE_C_FLAGS_RELWITHDEBINFO "/MD /Od /Zi /DWIN32 /DTBB_USE_ASSERT")
+    set(CMAKE_CXX_FLAGS "/MD /Od /Zi /EHsc /DWIN32 /DTBB_USE_ASSERT")
+    set(CMAKE_C_FLAGS "/MD /Od /Zi /DWIN32 /DTBB_USE_ASSERT")
 endif()
 
-if(CMAKE_CXX_FLAGS_RELWITHDEBINFO MATCHES "/O2")
-    string(REGEX REPLACE "/O2" "/Od" CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO}")
-endif()
-
-if("${CMAKE_CXX_COMPILER_ID}" MATCHES "Clang")
-    if(CMAKE_C_FLAGS_RELWITHDEBINFO MATCHES "-O2")
-        string(REGEX REPLACE "-O2" "-O0" CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO}")
-    endif()
-
-    if(CMAKE_CXX_FLAGS_RELWITHDEBINFO MATCHES "-O2")
-        string(REGEX REPLACE "-O2" "-O0" CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO}")
-    endif()
-endif()
-
-if(MSVC)
-    if(CMAKE_C_FLAGS_RELWITHDEBINFO MATCHES "/Ob1")
-        string(REGEX REPLACE "/Ob1" "/Ob0" CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO}")
-    endif()
-    if(CMAKE_CXX_FLAGS_RELWITHDEBINFO MATCHES "/Ob1")
-        string(REGEX REPLACE "/Ob1" "/Ob0" CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO}")
-    endif()
-
-    set(CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO} /RTC1")
-    set(CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO} /RTC1")
-endif()
-
-list(REMOVE_DUPLICATES CMAKE_C_FLAGS_RELWITHDEBINFO)
-list(REMOVE_DUPLICATES CMAKE_CXX_FLAGS_RELWITHDEBINFO)
-
 # Find and configure boost
 if(SLIC3R_STATIC)
     # Use static boost libraries.
     set(Boost_USE_STATIC_LIBS ON)
     # Use boost libraries linked statically to the C++ runtime.
     # set(Boost_USE_STATIC_RUNTIME ON)
-else()
-    add_definitions(-DBOOST_LOG_DYN_LINK)
 endif()
 #set(Boost_DEBUG ON)
 # set(Boost_COMPILER "-mgw81")
 # boost::process was introduced first in version 1.64.0,
 # boost::beast::detail::base64 was introduced first in version 1.66.0
-if(POLICY CMP0167)
-  cmake_policy(SET CMP0167 NEW)
-endif()
-find_package(Boost 1.83.0 REQUIRED COMPONENTS system filesystem thread log log_setup locale regex chrono atomic date_time iostreams program_options nowide)
+set(MINIMUM_BOOST_VERSION "1.66.0")
+set(_boost_components "system;filesystem;thread;log;locale;regex;chrono;atomic;date_time;iostreams")
+find_package(Boost ${MINIMUM_BOOST_VERSION} REQUIRED COMPONENTS ${_boost_components})
 
 add_library(boost_libs INTERFACE)
 add_library(boost_headeronly INTERFACE)
@@ -504,7 +356,7 @@ endif()
 function(slic3r_remap_configs targets from_Cfg to_Cfg)
     if(MSVC)
         string(TOUPPER ${from_Cfg} from_CFG)
-
+    
         foreach(tgt ${targets})
             if(TARGET ${tgt})
                 set_target_properties(${tgt} PROPERTIES MAP_IMPORTED_CONFIG_${from_CFG} ${to_Cfg})
@@ -513,17 +365,36 @@ function(slic3r_remap_configs targets from_Cfg to_Cfg)
     endif()
 endfunction()
 
-target_include_directories(boost_headeronly SYSTEM INTERFACE ${Boost_INCLUDE_DIRS})
-target_link_libraries(boost_libs INTERFACE boost_headeronly ${Boost_LIBRARIES})
+if(TARGET Boost::system)
+    message(STATUS "Boost::boost exists")
+    target_link_libraries(boost_headeronly INTERFACE Boost::boost)
+
+    # Only from cmake 3.12
+    # list(TRANSFORM _boost_components PREPEND Boost:: OUTPUT_VARIABLE _boost_targets)
+    set(_boost_targets "")
+    foreach(comp ${_boost_components})
+        list(APPEND _boost_targets "Boost::${comp}")
+    endforeach()
+
+    target_link_libraries(boost_libs INTERFACE
+        boost_headeronly # includes the custom compile definitions as well
+        ${_boost_targets}
+        )
+    slic3r_remap_configs("${_boost_targets}" RelWithDebInfo Release)
+else()
+    target_include_directories(boost_headeronly INTERFACE ${Boost_INCLUDE_DIRS})
+    target_link_libraries(boost_libs INTERFACE boost_headeronly ${Boost_LIBRARIES})
+endif()
+
+
 
 # Find and configure intel-tbb
 if(SLIC3R_STATIC)
     set(TBB_STATIC 1)
 endif()
 set(TBB_DEBUG 1)
-set(CMAKE_MAP_IMPORTED_CONFIG_RELWITHDEBINFO RelWithDebInfo Release "")
 find_package(TBB REQUIRED)
-# include_directories(SYSTEM ${TBB_INCLUDE_DIRS})
+# include_directories(${TBB_INCLUDE_DIRS})
 # add_definitions(${TBB_DEFINITIONS})
 # if(MSVC)
 #     # Suppress implicit linking of the TBB libraries by the Visual Studio compiler.
@@ -533,9 +404,11 @@ find_package(TBB REQUIRED)
 # add_definitions(-DTBB_USE_CAPTURED_EXCEPTION=0)
 
 find_package(OpenSSL REQUIRED)
+if (APPLE)
+find_package(CURL CONFIG REQUIRED)
+else()
 find_package(CURL REQUIRED)
-find_package(Freetype REQUIRED)
-
+endif()
 
 add_library(libcurl INTERFACE)
 target_link_libraries(libcurl INTERFACE CURL::libcurl)
@@ -566,7 +439,7 @@ if (SLIC3R_STATIC AND NOT SLIC3R_STATIC_EXCLUDE_CURL)
         find_package(OpenSSL REQUIRED)
         message("OpenSSL include dir: ${OPENSSL_INCLUDE_DIR}")
         message("OpenSSL libraries: ${OPENSSL_LIBRARIES}")
-        target_include_directories(libcurl SYSTEM INTERFACE ${OPENSSL_INCLUDE_DIR})
+        target_include_directories(libcurl INTERFACE ${OPENSSL_INCLUDE_DIR})
         target_link_libraries(libcurl INTERFACE ${OPENSSL_LIBRARIES})
     endif()
 endif()
@@ -604,35 +477,35 @@ find_package(PNG REQUIRED)
 set(OpenGL_GL_PREFERENCE "LEGACY")
 find_package(OpenGL REQUIRED)
 
-set(GLEW_ROOT "${CMAKE_PREFIX_PATH}")
-message("GLEW_ROOT: ${GLEW_ROOT}")
 # Find glew or use bundled version
 if (SLIC3R_STATIC AND NOT SLIC3R_STATIC_EXCLUDE_GLEW)
     set(GLEW_USE_STATIC_LIBS ON)
     set(GLEW_VERBOSE ON)
 endif()
 
-find_package(GLEW REQUIRED)
+find_package(GLEW)
+if (NOT TARGET GLEW::GLEW)
+    message(STATUS "GLEW not found, using bundled version.")
+    add_library(glew STATIC ${LIBDIR}/glew/src/glew.c)
+    set(GLEW_FOUND TRUE)
+    set(GLEW_INCLUDE_DIRS ${LIBDIR}/glew/include/)
+    target_compile_definitions(glew PUBLIC GLEW_STATIC)
+    target_include_directories(glew PUBLIC ${GLEW_INCLUDE_DIRS})
+    add_library(GLEW::GLEW ALIAS glew)
+endif ()
 
 find_package(glfw3 REQUIRED)
 
 # Find the Cereal serialization library
 find_package(cereal REQUIRED)
-if (NOT TARGET cereal::cereal)
-    set_target_properties(cereal PROPERTIES IMPORTED_GLOBAL TRUE)
-    add_library(cereal::cereal ALIAS cereal)
-else ()
-    set_target_properties(cereal::cereal PROPERTIES IMPORTED_GLOBAL TRUE)
-endif ()
 
 # l10n
 set(L10N_DIR "${SLIC3R_RESOURCES_DIR}/i18n")
-set(BBL_L18N_DIR "${CMAKE_CURRENT_SOURCE_DIR}/localization/i18n")
+set(BBL_L18N_DIR "${CMAKE_CURRENT_SOURCE_DIR}/bbl/i18n")
 add_custom_target(gettext_make_pot
     COMMAND xgettext --keyword=L --keyword=_L --keyword=_u8L --keyword=L_CONTEXT:1,2c --keyword=_L_PLURAL:1,2 --add-comments=TRN --from-code=UTF-8 --no-location --debug --boost
         -f "${BBL_L18N_DIR}/list.txt"
-        -o "${BBL_L18N_DIR}/OrcaSlicer.pot"
-	COMMAND hintsToPot ${SLIC3R_RESOURCES_DIR} ${BBL_L18N_DIR}
+        -o "${BBL_L18N_DIR}/BambuStudio.pot"
     WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}
     COMMENT "Generate pot file from strings in the source tree"
 )
@@ -640,13 +513,13 @@ add_custom_target(gettext_merge_po_with_pot
     WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}
     COMMENT "Merge localization po with new generted pot file"
 )
-file(GLOB BBL_L10N_PO_FILES "${BBL_L18N_DIR}/*/OrcaSlicer*.po")
+file(GLOB BBL_L10N_PO_FILES "${BBL_L18N_DIR}/*/BambuStudio*.po")
 foreach(po_file ${BBL_L10N_PO_FILES})
     GET_FILENAME_COMPONENT(po_dir "${po_file}" DIRECTORY)
-    SET(po_new_file "${po_dir}/OrcaSlicer_.po")
+    SET(po_new_file "${po_dir}/BambuStudio_.po")
     add_custom_command(
         TARGET gettext_merge_po_with_pot PRE_BUILD
-        COMMAND msgmerge -N -o ${po_file} ${po_file} "${BBL_L18N_DIR}/OrcaSlicer.pot"
+        COMMAND msgmerge -N -o ${po_file} ${po_file} "${BBL_L18N_DIR}/BambuStudio.pot"
         DEPENDS ${po_file}
     )
 endforeach()
@@ -654,11 +527,11 @@ add_custom_target(gettext_po_to_mo
     WORKING_DIRECTORY ${PROJECT_SOURCE_DIR}
     COMMENT "Generate localization po files (binary) from mo files (texts)"
 )
-file(GLOB L10N_PO_FILES "${BBL_L18N_DIR}/*/OrcaSlicer*.po")
+file(GLOB L10N_PO_FILES "${BBL_L18N_DIR}/*/BambuStudio*.po")
 foreach(po_file ${BBL_L10N_PO_FILES})
     GET_FILENAME_COMPONENT(SECOND_FOLDER_ABSOLUTE ${po_file} DIRECTORY)
     string(REGEX REPLACE ".*/(.*)" "\\1" po_dir "${SECOND_FOLDER_ABSOLUTE}" )
-    SET(mo_file "${L10N_DIR}/${po_dir}/OrcaSlicer.mo")
+    SET(mo_file "${L10N_DIR}/${po_dir}/BambuStudio.mo")
     add_custom_command(
         TARGET gettext_po_to_mo PRE_BUILD
         COMMAND msgfmt ARGS --check-format -o ${mo_file} ${po_file}
@@ -685,27 +558,13 @@ else ()
                    "OpenVDB installation with the OPENVDB_FIND_MODULE_PATH cache variable.")
 endif ()
 
-find_path(SPNAV_INCLUDE_DIR spnav.h)
-if (SPNAV_INCLUDE_DIR)
-    find_library(SPNAV_LIB NAMES libspnav.a) # Force linking libspnav statically
-    if (SPNAV_LIB)
-        add_definitions(-DHAVE_SPNAV)
-        message(STATUS "SPNAV library found")
-    else()
-        message(STATUS "SPNAV library NOT found, Spacenavd not supported")
-    endif()
-else()
-    message(STATUS "SPNAV library NOT found, Spacenavd not supported")
-endif()
 
 set(TOP_LEVEL_PROJECT_DIR ${PROJECT_SOURCE_DIR})
-function(orcaslicer_copy_dlls target config postfix output_dlls)
-    if ("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "AMD64")
-        set(_arch "x64")
-    elseif ("${CMAKE_SYSTEM_PROCESSOR}" STREQUAL "X86")
-        set(_arch "x86")
-    else ()
-        message(FATAL_ERROR "Unable to detect architecture")
+function(bambustudio_copy_dlls target config postfix output_dlls)
+    if ("${CMAKE_SIZEOF_VOID_P}" STREQUAL "8")
+        set(_bits 64)
+    elseif ("${CMAKE_SIZEOF_VOID_P}" STREQUAL "4")
+        set(_bits 32)
     endif ()
 
     get_property(_is_multi GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)
@@ -722,9 +581,9 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
         message ("set out_dir to CMAKE_CURRENT_BINARY_DIR: ${_out_dir}")
     endif ()
 
-    file(COPY ${TOP_LEVEL_PROJECT_DIR}/deps/GMP/gmp/lib/win-${_arch}/libgmp-10.dll
-            ${TOP_LEVEL_PROJECT_DIR}/deps/MPFR/mpfr/lib/win-${_arch}/libmpfr-4.dll
-            ${TOP_LEVEL_PROJECT_DIR}/deps/WebView2/lib/win-${_arch}/WebView2Loader.dll
+    file(COPY ${TOP_LEVEL_PROJECT_DIR}/deps/GMP/gmp/lib/win${_bits}/libgmp-10.dll
+            ${TOP_LEVEL_PROJECT_DIR}/deps/MPFR/mpfr/lib/win${_bits}/libmpfr-4.dll
+            ${TOP_LEVEL_PROJECT_DIR}/deps/WebView2/lib/win${_bits}/WebView2Loader.dll
         DESTINATION ${_out_dir})
 
     file(COPY ${CMAKE_PREFIX_PATH}/bin/occt/TKBO.dll
@@ -753,7 +612,6 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
             ${CMAKE_PREFIX_PATH}/bin/occt/TKXCAF.dll
             ${CMAKE_PREFIX_PATH}/bin/occt/TKXDESTEP.dll
             ${CMAKE_PREFIX_PATH}/bin/occt/TKXSBase.dll
-            ${CMAKE_PREFIX_PATH}/bin/freetype.dll
          DESTINATION ${_out_dir})
 
     set(${output_dlls}
@@ -788,20 +646,15 @@ function(orcaslicer_copy_dlls target config postfix output_dlls)
         ${_out_dir}/TKXDESTEP.dll
         ${_out_dir}/TKXSBase.dll
 
-        ${_out_dir}/freetype.dll
-
         PARENT_SCOPE
     )
-
+    
 endfunction()
 
 
-# libslic3r, OrcaSlicer GUI and the OrcaSlicer executable.
-add_subdirectory(deps_src)
+# libslic3r, BambuStudio GUI and the BambuStudio executable.
 add_subdirectory(src)
-set_property(DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} PROPERTY VS_STARTUP_PROJECT OrcaSlicer_app_gui)
-
-add_dependencies(gettext_make_pot hintsToPot)
+set_property(DIRECTORY ${CMAKE_CURRENT_SOURCE_DIR} PROPERTY VS_STARTUP_PROJECT BambuStudio_app_gui)
 
 # Perl bindings, currently only used for the unit / integration tests of libslic3r.
 # Also runs the unit / integration tests.
@@ -814,69 +667,37 @@ if(SLIC3R_BUILD_SANDBOXES)
     add_subdirectory(sandboxes)
 endif()
 
-if(BUILD_TESTS)
+if(SLIC3R_BUILD_TESTS)
     add_subdirectory(tests)
 endif()
 
-if (NOT WIN32 AND NOT APPLE)
-    set(SLIC3R_APP_CMD "orca-slicer")
-    configure_file(${LIBDIR}/dev-utils/platform/unix/build_appimage.sh.in ${CMAKE_CURRENT_BINARY_DIR}/build_appimage.sh USE_SOURCE_PERMISSIONS @ONLY)
+option(BUILD_BBS_TEST_TOOLS          "Build bbs test tools" OFF)
+if(BUILD_BBS_TEST_TOOLS)
+    add_subdirectory(bbs_test_tools)
 endif()
 
 
 # Resources install target, configure fhs.hpp on UNIX
 if (WIN32)
-    install(DIRECTORY "${SLIC3R_RESOURCES_DIR}/" DESTINATION "./resources")
-    set(CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS_SKIP TRUE)
-    include(InstallRequiredSystemLibraries)
-    install (PROGRAMS ${CMAKE_INSTALL_SYSTEM_RUNTIME_LIBS} DESTINATION ".")
+    install(DIRECTORY "${SLIC3R_RESOURCES_DIR}/" DESTINATION "${CMAKE_INSTALL_PREFIX}/resources")
 elseif (SLIC3R_FHS)
     # CMAKE_INSTALL_FULL_DATAROOTDIR: read-only architecture-independent data root (share)
-    set(SLIC3R_FHS_RESOURCES "${CMAKE_INSTALL_FULL_DATAROOTDIR}/OrcaSlicer")
+    set(SLIC3R_FHS_RESOURCES "${CMAKE_INSTALL_FULL_DATAROOTDIR}/BambuStudio")
     install(DIRECTORY ${SLIC3R_RESOURCES_DIR}/ DESTINATION ${SLIC3R_FHS_RESOURCES}
         PATTERN "*/udev" EXCLUDE
     )
-    install(FILES src/dev-utils/platform/unix/OrcaSlicer.desktop DESTINATION ${CMAKE_INSTALL_DATAROOTDIR}/applications)
+    install(FILES src/platform/unix/BambuStudio.desktop DESTINATION ${CMAKE_INSTALL_DATAROOTDIR}/applications)
     foreach(SIZE 32 128 192)
-        install(FILES ${SLIC3R_RESOURCES_DIR}/images/OrcaSlicer_${SIZE}px.png
-            DESTINATION ${CMAKE_INSTALL_DATAROOTDIR}/icons/hicolor/${SIZE}x${SIZE}/apps RENAME OrcaSlicer.png
+        install(FILES ${SLIC3R_RESOURCES_DIR}/images/BambuStudio_${SIZE}px.png
+            DESTINATION ${CMAKE_INSTALL_DATAROOTDIR}/icons/hicolor/${SIZE}x${SIZE}/apps RENAME BambuStudio.png
         )
     endforeach()
+    install(DIRECTORY ${SLIC3R_RESOURCES_DIR}/udev/ DESTINATION lib/udev/rules.d)
 elseif (CMAKE_MACOSX_BUNDLE)
-    # install(DIRECTORY "${SLIC3R_RESOURCES_DIR}/" DESTINATION "${CMAKE_INSTALL_PREFIX}/OrcaSlicer.app/Contents/resources")
+    install(DIRECTORY "${SLIC3R_RESOURCES_DIR}/" DESTINATION "${CMAKE_INSTALL_PREFIX}/BambuStudio.app/Contents/resources")
 else ()
-    install(FILES src/dev-utils/platform/unix/OrcaSlicer.desktop DESTINATION ${CMAKE_INSTALL_PREFIX}/resources/applications)
+    install(FILES src/platform/unix/BambuStudio.desktop DESTINATION ${CMAKE_INSTALL_PREFIX}/resources/applications)
     install(DIRECTORY "${SLIC3R_RESOURCES_DIR}/" DESTINATION "${CMAKE_INSTALL_PREFIX}/resources")
 endif ()
 
-install(FILES ${CMAKE_SOURCE_DIR}/LICENSE.txt DESTINATION ".")
-configure_file(${LIBDIR}/dev-utils/platform/unix/fhs.hpp.in ${LIBDIR_BIN}/dev-utils/platform/unix/fhs.hpp)
-
-set (CPACK_PACKAGE_NAME "OrcaSlicer")
-set (CPACK_PACKAGE_VENDOR "SoftFever")
-set (CPACK_PACKAGE_VERSION_MAJOR "${ORCA_VERSION_MAJOR}")
-set (CPACK_PACKAGE_VERSION_MINOR "${ORCA_VERSION_MINOR}")
-set (CPACK_PACKAGE_VERSION_PATCH "${ORCA_VERSION_PATCH}")
-set (CPACK_PACKAGE_FILE_NAME "OrcaSlicer_Windows_Installer_V${SoftFever_VERSION}")
-set (CPACK_PACKAGE_DESCRIPTION_SUMMARY "Orca Slicer is an open source slicer for FDM printers")
-set (CPACK_PACKAGE_HOMEPAGE_URL "https://github.com/SoftFever/OrcaSlicer")
-set (CPACK_PACKAGE_INSTALL_DIRECTORY ${CPACK_PACKAGE_NAME})
-set (CPACK_PACKAGE_ICON "${CMAKE_SOURCE_DIR}/resources/images\\\\OrcaSlicer.ico")
-set (CPACK_NSIS_MUI_ICON "${CPACK_PACKAGE_ICON}")
-set (CPACK_NSIS_MUI_UNIICON "${CPACK_PACKAGE_ICON}")
-set (CPACK_NSIS_INSTALLED_ICON_NAME  "$INSTDIR\\\\orca-slicer.exe")
-set(CPACK_NSIS_EXTRA_INSTALL_COMMANDS "
-    CreateShortCut \\\"$DESKTOP\\\\OrcaSlicer.lnk\\\" \\\"$INSTDIR\\\\orca-slicer.exe\\\"
-")
-set (CPACK_PACKAGE_CHECKSUM SHA256)
-set (CPACK_PACKAGE_INSTALL_REGISTRY_KEY "OrcaSlicer")
-set (CPACK_NSIS_ENABLE_UNINSTALL_BEFORE_INSTALL ON)
-set (CPACK_NSIS_EXECUTABLES_DIRECTORY ".")
-# set (CPACK_NSIS_MODIFY_PATH "ON")
-set(CPACK_PACKAGE_EXECUTABLES "orca-slicer;OrcaSlicer")
-set(CPACK_CREATE_DESKTOP_LINKS "orca-slicer")
-set (CPACK_RESOURCE_FILE_LICENSE ${CMAKE_SOURCE_DIR}/LICENSE.txt) # must also include in install command
-
-set(CPACK_WIX_UPGRADE_GUID "058245e8-20e0-4a95-9ab7-1acfe17ad511")
-set(CPACK_GENERATOR NSIS)
-include(CPack)
+configure_file(${LIBDIR}/platform/unix/fhs.hpp.in ${LIBDIR_BIN}/platform/unix/fhs.hpp)

README.md

@@ -1,212 +1,80 @@
-<div align="center">
 
-<picture>
-  <img alt="OrcaSlicer logo" src="resources/images/OrcaSlicer.png" width="15%" height="15%">
-</picture>
+A modified version of Bambu Studio.   
+It has following changes:
 
-<a href="https://trendshift.io/repositories/952" target="_blank"><img src="https://trendshift.io/api/badge/repositories/952" alt="SoftFever%2FOrcaSlicer | Trendshift" style="width: 250px; height: 55px;" width="250" height="55"/></a>
+- Support third-party machines:
+    - Voron 2.4
+    - Voron Trident
+    - Voron 0.1
+    - Prusa MK3S
+- Export to to .gcode file.
 
-[![GitHub Repo stars](https://img.shields.io/github/stars/SoftFever/OrcaSlicer)](https://github.com/SoftFever/OrcaSlicer/stargazers) [![Build all](https://github.com/SoftFever/OrcaSlicer/actions/workflows/build_all.yml/badge.svg?branch=main)](https://github.com/SoftFever/OrcaSlicer/actions/workflows/build_all.yml)
+Video: https://youtu.be/zCc7mVwu2xQ  
+ 
+![image](https://user-images.githubusercontent.com/103989404/179447873-b7b2a200-7a00-409d-b9d5-b0522f5f2ec8.png)
+![image](https://user-images.githubusercontent.com/103989404/179447890-a124bd43-dab2-46b7-b0da-ef6c67783d9c.png)
+![image](https://user-images.githubusercontent.com/103989404/179396355-fc07135a-fd08-430c-aa8d-dc1060ae94d1.png)
+![image](https://user-images.githubusercontent.com/103989404/179447933-7752235a-a6eb-468c-a304-6eb0875c4c95.png)
+![image](https://user-images.githubusercontent.com/103989404/179396363-d9868dfc-f8d5-4227-ad19-a439dfc31ce5.png)
+![image](https://user-images.githubusercontent.com/103989404/179398283-f71ea1bd-18a8-4526-9678-a3c63bc36964.png)
 
-OrcaSlicer: an open source Next-Gen Slicing Software for Precision 3D Prints.  
-Optimize your prints with ultra-fast slicing, intelligent support generation, and seamless printer compatibility—engineered for perfection.
-<h3>
+Image credits: 
+ 1. Voron 2.4: vorondesign.com
+ 2. Voron bed texture: VoronUsers/bryansj
+ 3. Voron 0.1: myself
+ 4. Prusa MK3S: Prusa3d  
 
-# Official links and community
 
-#### Official Website:
-<a href="https://www.orcaslicer.com/" style="font-size:2em;">OrcaSlicer.com</a>
+=========================SPLIT=========================     
 
-#### Github Repository:
-<a href="https://github.com/SoftFever/OrcaSlicer"><img src="https://img.shields.io/badge/OrcaSlicer-181717?style=flat&logo=github&logoColor=white" width="200" alt="GitHub Logo"/> </a>
+![image](https://user-images.githubusercontent.com/106916061/179006347-497d24c0-9bd6-45b7-8c49-d5cc8ecfe5d7.png)
+# BambuStudio
+Bambu Studio is a cutting-edge, feature-rich slicing software.  
+It contains project-based workflows, systematically optimized slicing algorithms, and an easy-to-use graphic interface, bringing users an incredibly smooth printing experience.
 
-#### Follow us:
-<a href="https://twitter.com/real_OrcaSlicer"><img src="https://img.shields.io/badge/real__OrcaSlicer-000000?style=flat&logo=x&logoColor=white" width="200" alt="X Logo"/> </a>
+Prebuilt Windows, macOS 64-bit releases are available through the [github releases page](https://github.com/bambulab/BambuStudio/releases/).  
+Linux version currently is not supported.
 
-#### Join our Discord community:
-<a href="https://discord.gg/P4VE9UY9gJ"><img src="https://img.shields.io/badge/-Discord-5865F2?style=flat&logo=discord&logoColor=fff" width="200" alt="discord logo"/> </a>
+Bambu Studio is based on [PrusaSlicer](https://github.com/prusa3d/PrusaSlicer) by Prusa Research, which is from [Slic3r](https://github.com/Slic3r/Slic3r) by Alessandro Ranellucci and the RepRap community.
 
-<table border="2" style="border-color: #ffa500; background-color:rgb(232, 220, 180); color: #856404;">
-<tr>
-<td>
-<strong>⚠️ CAUTION:</strong><br><br>
-There are several clickbait and malicious websites pretending to be Official OrcaSlicer. These sites may redirect you to dangerous downloads or contain misleading information.
-<br><br>
-If you come across any of these in search results, please <a href="https://safebrowsing.google.com/safebrowsing/report_phish/?">report them as unsafe or phishing</a>  to help keep the community secure.
-</td>
-</tr>
-</table>
+See the [wiki](https://github.com/bambulab/BambuStudio/wiki) and the [documentation directory](https://github.com/bambulab/BambuStudio/tree/master/doc) for more informations.
 
-</div>
+# What are Bambu Studio's main features?
+Key features are:
+- Basic slicing features & GCode viewer
+- Multiple plates management
+- Remote control & monitoring
+- Auto-arrange objects
+- Auto-orient objects
+- Hybrid/Tree/Normal support types, Customized support
+- multi-material printing and rich painting tools
+- multi-platform (Win/Mac/Linux) support
+- Global/Object/Part level slicing parameters
 
-# Main features
+Other major features are:
+- Advanced cooling logic controlling fan speed and dynamic print speed
+- Auto brim according to mechanical analysis
+- Support arc path(G2/G3)
+- Support STEP format
+- Assembly & explosion view
+- Flushing transition-filament into infill/object during filament change
 
-- **[Advanced Calibration Tools](https://github.com/SoftFever/OrcaSlicer/wiki/Calibration)**  
-  Comprehensive suite: temperature towers, flow rate, retraction & more for optimal performance.
-- **[Precise Wall](https://github.com/SoftFever/OrcaSlicer/wiki/quality_settings_precision#precise-wall) and [Seam Control](https://github.com/SoftFever/OrcaSlicer/wiki/quality_settings_seam)**  
-  Adjust outer wall spacing and apply scarf seams to enhance print accuracy.
-- **[Sandwich Mode](https://github.com/SoftFever/OrcaSlicer/wiki/quality_settings_wall_and_surfaces#innerouterinner) and [Polyholes](https://github.com/SoftFever/OrcaSlicer/wiki/quality_settings_precision#polyholes) Support**  
-  Use varied infill [patterns](https://github.com/SoftFever/OrcaSlicer/wiki/strength_settings_patterns) and accurate hole shapes for improved clarity.
-- **[Overhang](https://github.com/SoftFever/OrcaSlicer/wiki/quality_settings_overhangs) and [Support Optimization](https://github.com/SoftFever/OrcaSlicer/wiki#support-settings)**  
-  Modify geometry for printable overhangs with precise support placement.
-- **[Granular Controls](https://github.com/SoftFever/OrcaSlicer/wiki#process-settings) and Customization**  
-  Fine-tune print speed, layer height, pressure, and temperature with precision.
-- **Network Printer Support**  
-  Seamless integration with Klipper, PrusaLink, and OctoPrint for remote control.
-- **[Mouse Ear Brims](https://github.com/SoftFever/OrcaSlicer/wiki/others_settings_brim) & Adaptive Bed Mesh**  
-  Automatic brims and adaptive mesh calibration ensure consistent adhesion.
-- **User-Friendly Interface**  
-  Intuitive drag-and-drop design with pre-made profiles for popular printers.
-- **[Open-Source](https://github.com/SoftFever/OrcaSlicer) & [Community Driven](https://discord.gg/P4VE9UY9gJ)**  
-  Regular updates fueled by continuous community contributions.
-- **Wide Printer Compatibility**  
-  Supports a broad range of printers: Bambu Lab, Prusa, Creality, Voron, and more.
-- Additional features can be found in the [change notes](https://github.com/SoftFever/OrcaSlicer/releases/).
+# How to compile
+Following platforms are currently supported to compile:
+- Windows 64-bit, [Compile Guide](https://github.com/bambulab/BambuStudio/wiki/Windows-Compile-Guide)
+- Mac 64-bit, [Compile Guide](https://github.com/bambulab/BambuStudio/wiki/Mac-Compile-Guide)
 
-# Wiki
-
-The wiki below aims to provide a detailed explanation of the slicer settings, including how to maximize their use and how to calibrate and set up your printer.
-
-Please note that the wiki is a work in progress. We appreciate your patience as we continue to develop and improve it!
-
-- **[Access the wiki here](https://github.com/SoftFever/OrcaSlicer/wiki)**
-- **[Contribute to the wiki](https://github.com/SoftFever/OrcaSlicer/wiki/How-to-wiki)**
-
-# Download
-
-## Stable Release
-
-📥 **[Download the Latest Stable Release](https://github.com/SoftFever/OrcaSlicer/releases/latest)**  
-Visit our GitHub Releases page for the latest stable version of OrcaSlicer, recommended for most users.
-
-## Nightly Builds
-
-🌙 **[Download the Latest Nightly Build](https://github.com/SoftFever/OrcaSlicer/releases/tag/nightly-builds)**  
-Explore the latest developments in OrcaSlicer with our nightly builds. Feedback on these versions is highly appreciated.
-
-# How to install
-
-## Windows
-
-Download the **Windows Installer exe**  for your preferred version from the [releases page](https://github.com/SoftFever/OrcaSlicer/releases).
-
- - *For convenience there is also a portable build available.*
-    <details>
-    <summary>Troubleshooting</summary>
-
-    - *If you have troubles to run the build, you might need to install following runtimes:*
-    - [MicrosoftEdgeWebView2RuntimeInstallerX64](https://github.com/SoftFever/OrcaSlicer/releases/download/v1.0.10-sf2/MicrosoftEdgeWebView2RuntimeInstallerX64.exe)
-        - [Details of this runtime](https://aka.ms/webview2)
-        - [Alternative Download Link Hosted by Microsoft](https://go.microsoft.com/fwlink/p/?LinkId=2124703)
-    - [vcredist2019_x64](https://github.com/SoftFever/OrcaSlicer/releases/download/v1.0.10-sf2/vcredist2019_x64.exe)
-        -  [Alternative Download Link Hosted by Microsoft](https://aka.ms/vs/17/release/vc_redist.x64.exe)
-        -  This file may already be available on your computer if you've installed visual studio.  Check the following location: `%VCINSTALLDIR%Redist\MSVC\v142`
-    </details>
-
-Windows Package Manager
-
-```shell
-winget install --id=SoftFever.OrcaSlicer -e
-```
-
-## Mac
-
-1. Download the DMG for your computer: `arm64` version for Apple Silicon and `x86_64` for Intel CPU.
-2. Drag OrcaSlicer.app to Application folder.
-3. *If you want to run a build from a PR, you also need to follow the instructions below:*
-
-    <details>
-    <summary>Quarantine</summary>
-
-    - Option 1 (You only need to do this once. After that the app can be opened normally.):
-      - Step 1: Hold _cmd_ and right click the app, from the context menu choose **Open**.
-      - Step 2: A warning window will pop up, click _Open_
-
-    - Option 2:
-      Execute this command in terminal:
-
-      ```shell
-      xattr -dr com.apple.quarantine /Applications/OrcaSlicer.app
-      ```
-
-    - Option 3:
-        - Step 1: open the app, a warning window will pop up  
-            ![mac_cant_open](./SoftFever_doc/mac_cant_open.png)
-        - Step 2: in `System Settings` -> `Privacy & Security`, click `Open Anyway`:  
-            ![mac_security_setting](./SoftFever_doc/mac_security_setting.png)
-    </details>
-
-## Linux (Ubuntu)
-
- 1. If you run into trouble executing it, try this command in the terminal:
-    `chmod +x /path_to_appimage/OrcaSlicer_Linux.AppImage`
-
-# How to Compile
-
-All updated build instructions for Windows, macOS, and Linux are now available on the official [OrcaSlicer Wiki - How to build](https://github.com/SoftFever/OrcaSlicer/wiki/How-to-build) page.
-
-Please refer to the wiki to ensure you're following the latest and most accurate steps for your platform.
-
-# Klipper Note
-
-If you're running Klipper, it's recommended to add the following configuration to your `printer.cfg` file.
-
-```gcode
-# Enable object exclusion
-[exclude_object]
-
-# Enable arcs support
-[gcode_arcs]
-resolution: 0.1
-```
-
-# Supports
-
-**OrcaSlicer** is an open-source project and I'm deeply grateful to all my sponsors and backers.  
-Their generous support enables me to purchase filaments and other essential 3D printing materials for the project.  
-Thank you! :)
-
-## Sponsors:
-
-<table>
-<tr>
-<td>
-<a href="https://qidi3d.com/" style="display:inline-block; border-radius:8px; background:#fff;">
-  <img src="SoftFever_doc\sponsor_logos\QIDI.png" alt="QIDI" width="100" height="100">
-</a>
-</td>
-<td>
-<a href="https://bigtree-tech.com/" style="display:inline-block; border-radius:8px; background:#222;">
-    <img src="SoftFever_doc\sponsor_logos\BigTreeTech.png" alt="BIGTREE TECH" width="100" height="100">
-</a>
-</td>
-</tr>
-</table>
-
-## Backers:
-
-**Ko-fi supporters** ☕: [Backers list](https://github.com/user-attachments/files/16147016/Supporters_638561417699952499.csv)
-
-## Support me
-
-<a href="https://github.com/sponsors/SoftFever"><img src="https://img.shields.io/badge/GitHub%20Sponsors-30363D?style=flat&logo=GitHub-Sponsors&logoColor=EA4AAA" height="50"></a>
-<a href="https://ko-fi.com/G2G5IP3CP"><img src="https://img.shields.io/badge/Support_me_on_Ko--fi-FF5E5B?style=flat&logo=ko-fi&logoColor=white" height="50"></a>
-<a href="https://paypal.me/softfever3d"><img src="https://img.shields.io/badge/PayPal-003087?style=flat&logo=paypal&logoColor=fff" height="50"></a>
-
-## Some background
-
-OrcaSlicer was originally forked from Bambu Studio, it was previously known as BambuStudio-SoftFever.
-
-[Bambu Studio](https://github.com/bambulab/BambuStudio) is forked from [PrusaSlicer](https://github.com/prusa3d/PrusaSlicer) by Prusa Research, which is from [Slic3r](https://github.com/Slic3r/Slic3r) by Alessandro Ranellucci and the RepRap community.
-OrcaSlicer incorporates a lot of features from [SuperSlicer](https://github.com/supermerill/SuperSlicer) by @supermerill
-OrcaSlicer's logo is designed by community member Justin Levine (@freejstnalxndr).
+# Report issue
+You can add an issue to the [github tracker](https://github.com/bambulab/BambuStudio/issues) if **it isn't already present.**
 
 # License
+Bambu Studio is licensed under the GNU Affero General Public License, version 3. Bambu Studio is based on PrusaSlicer by PrusaResearch.
+
+PrusaSlicer is licensed under the GNU Affero General Public License, version 3. PrusaSlicer is owned by Prusa Research. PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci.
+
+Slic3r is licensed under the GNU Affero General Public License, version 3. Slic3r was created by Alessandro Ranellucci with the help of many other contributors.
+
+The GNU Affero General Public License, version 3 ensures that if you use any part of this software in any way (even behind a web server), your software must be released under the same license.
+
+The BambuNetworking and BambuTunnel plugins are based on non-free libraries. They are optional to the Bambu Studio and provides extended functionalities for users.
 
-- **OrcaSlicer** is licensed under the GNU Affero General Public License, version 3. OrcaSlicer is based on Bambu Studio by BambuLab.
-- **Bambu Studio** is licensed under the GNU Affero General Public License, version 3. Bambu Studio is based on PrusaSlicer by PrusaResearch.
-- **PrusaSlicer** is licensed under the GNU Affero General Public License, version 3. PrusaSlicer is owned by Prusa Research. PrusaSlicer is originally based on Slic3r by Alessandro Ranellucci.
-- **Slic3r** is licensed under the GNU Affero General Public License, version 3. Slic3r was created by Alessandro Ranellucci with the help of many other contributors.
-- The **GNU Affero General Public License**, version 3 ensures that if you use any part of this software in any way (even behind a web server), your software must be released under the same license.
-- OrcaSlicer includes a **pressure advance calibration pattern test** adapted from Andrew Ellis' generator, which is licensed under GNU General Public License, version 3. Ellis' generator is itself adapted from a generator developed by Sineos for Marlin, which is licensed under GNU General Public License, version 3.
-- The **Bambu networking plugin** is based on non-free libraries from BambuLab. It is optional to the OrcaSlicer and provides extended functionalities for Bambulab printer users.

Readme.txt

@@ -0,0 +1 @@
+Init Version

SECURITY.md

@@ -1,47 +0,0 @@
-# Security Policy
-
-At OrcaSlicer, we are committed to maintaining the security of our ecosystem. Our policy is to ensure that we do not introduce vulnerabilities and that any security issues are addressed promptly and responsibly. We appreciate your help in improving the security of OrcaSlicer and thank you for your responsible disclosure.
-Reporting Security Bugs
-
-## To report a security bug, please follow these guidelines:
-
-  * Email Security Bugs:
-        Send an email to the lead maintainer at softfeverever@gmail.com.
-        Include the word "SECURITY" in the subject line of your email.
-
-  * Response Times:
-        The lead maintainer will acknowledge receipt of your email within one week (7 days).
-        A detailed response will follow within 48 hours, outlining the next steps for handling your report.
-        After the initial reply, the security team will keep you informed about the progress toward a fix and any announcements.
-
-  * Information and Collaboration:
-        We may request additional information or guidance as we work on addressing the issue.
-
-  * Handling the Report:
-        OrcaSlicer will confirm the problem and determine the affected versions.
-        We will audit the code to find any similar issues and prepare fixes for all releases still under maintenance.
-        Fixes will be released as quickly as possible.
-
-  * Third-Party Modules:
-        Report security issues in third-party modules to the respective maintainer of those modules.
-
-## Security Disclosure Guidelines
-
-When disclosing a vulnerability, please follow these steps to ensure your report is clear and actionable:
-
-  * Provide Detailed Information:
-        Scope: Clearly define the scope of the vulnerability.
-        Potential Impact: Let us know who could be affected by this exploit.
-        Reproduction Steps: Document detailed steps to reproduce the vulnerability.
-
-    Reference OWASP Guidelines:
-        Follow the <a href="https://cheatsheetseries.owasp.org/cheatsheets/Vulnerability_Disclosure_Cheat_Sheet.html">OWASP Vulnerability Disclosure Cheat Sheet</a> for best practices in vulnerability disclosure.
-
-## Security Recommendations
-
-To enhance security when using OrcaSlicer, we recommend following these steps:
-
-  * SEE SOMETHING: If you notice anything suspicious or have concerns, please report it.
-  * SAY SOMETHING: If you have any doubts or need assistance, do not hesitate to contact us.
-
-### Thank you for your commitment to the security of OrcaSlicer. Your efforts help us maintain a safe and reliable ecosystem.

bbl/i18n/list.txt

@@ -0,0 +1,109 @@
+src/slic3r/GUI/Gizmos/GLGizmoFdmSupports.cpp
+src/slic3r/GUI/Gizmos/GLGizmoFlatten.cpp
+src/slic3r/GUI/Gizmos/GLGizmoMmuSegmentation.cpp
+src/slic3r/GUI/Gizmos/GLGizmoMove.cpp
+src/slic3r/GUI/Gizmos/GLGizmoRotate.cpp
+src/slic3r/GUI/Gizmos/GLGizmoScale.cpp
+src/slic3r/GUI/Gizmos/GLGizmosManager.cpp
+src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp
+src/slic3r/GUI/Gizmos/GizmoObjectManipulation.cpp
+src/slic3r/GUI/Gizmos/GLGizmoAdvancedCut.cpp
+src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp
+src/slic3r/GUI/Gizmos/GLGizmoFaceDetector.cpp
+src/slic3r/GUI/Gizmos/GLGizmoModifier.cpp
+src/slic3r/GUI/GUI.cpp
+src/slic3r/GUI/GUI_App.cpp
+src/slic3r/GUI/GUI_Init.cpp
+src/slic3r/GUI/GUI_Factories.cpp
+src/slic3r/GUI/GUI_ObjectList.cpp
+src/slic3r/GUI/GUI_ObjectSettings.cpp
+src/slic3r/GUI/GUI_ObjectTable.cpp
+src/slic3r/GUI/GUI_ObjectTable.hpp
+src/slic3r/GUI/GUI_ObjectTableSettings.cpp
+src/slic3r/GUI/GUI_ObjectTableSettings.hpp
+src/slic3r/GUI/GUI_Preview.cpp
+src/slic3r/GUI/Widgets/SideTools.cpp
+src/slic3r/GUI/Widgets/AMSControl.cpp
+src/slic3r/GUI/ImGuiWrapper.cpp
+src/slic3r/GUI/Jobs/ArrangeJob.cpp
+src/slic3r/GUI/Jobs/OrientJob.cpp
+src/slic3r/GUI/Jobs/FillBedJob.cpp
+src/slic3r/GUI/Jobs/Job.cpp
+src/slic3r/GUI/Jobs/PlaterJob.cpp
+src/slic3r/GUI/Jobs/RotoptimizeJob.cpp
+src/slic3r/GUI/Jobs/BindJob.cpp
+src/slic3r/GUI/Jobs/PrintJob.cpp
+src/slic3r/GUI/AboutDialog.cpp
+src/slic3r/GUI/AMSMaterialsSetting.cpp
+src/slic3r/GUI/AMSSetting.cpp
+src/slic3r/GUI/BBLTopbar.cpp
+src/slic3r/GUI/BackgroundSlicingProcess.cpp
+src/slic3r/GUI/BedShapeDialog.cpp
+src/slic3r/GUI/BedShapeDialog.hpp
+src/slic3r/GUI/ConfigManipulation.cpp
+src/slic3r/GUI/DeviceManager.cpp
+src/slic3r/GUI/ExtraRenderers.cpp
+src/slic3r/GUI/Field.cpp
+src/slic3r/GUI/GCodeViewer.cpp
+src/slic3r/GUI/GLCanvas3D.cpp
+src/slic3r/GUI/Calibration.cpp
+src/slic3r/GUI/CameraPopup.cpp
+src/slic3r/GUI/ConnectPrinter.cpp
+src/slic3r/GUI/DebugToolDialog.cpp
+src/slic3r/GUI/HMSPanel.cpp
+src/slic3r/GUI/MainFrame.cpp
+src/slic3r/GUI/MediaPlayCtrl.cpp
+src/slic3r/GUI/Mouse3DController.cpp
+src/slic3r/GUI/StatusPanel.cpp
+src/slic3r/GUI/Monitor.cpp
+src/slic3r/GUI/MsgDialog.cpp
+src/slic3r/GUI/NotificationManager.hpp
+src/slic3r/GUI/NotificationManager.cpp
+src/slic3r/GUI/ObjectDataViewModel.cpp
+src/slic3r/GUI/OpenGLManager.cpp
+src/slic3r/GUI/OptionsGroup.cpp
+src/slic3r/GUI/ParamsPanel.cpp
+src/slic3r/GUI/PartPlate.cpp
+src/slic3r/GUI/Plater.cpp
+src/slic3r/GUI/Preferences.cpp
+src/slic3r/GUI/PresetComboBoxes.cpp
+src/slic3r/GUI/PresetHints.cpp
+src/slic3r/GUI/ProgressStatusBar.cpp
+src/slic3r/GUI/PublishDialog.cpp
+src/slic3r/GUI/SavePresetDialog.cpp
+src/slic3r/GUI/Search.cpp
+src/slic3r/GUI/Selection.cpp
+src/slic3r/GUI/SelectMachine.cpp
+src/slic3r/GUI/SendSystemInfoDialog.cpp
+src/slic3r/GUI/BindDialog.cpp
+src/slic3r/GUI/Tab.cpp
+src/slic3r/GUI/Tab.hpp
+src/slic3r/GUI/UnsavedChangesDialog.cpp
+src/slic3r/GUI/Auxiliary.cpp
+src/slic3r/GUI/UpdateDialogs.cpp
+src/slic3r/GUI/WipeTowerDialog.cpp
+src/slic3r/GUI/wxExtensions.cpp
+src/slic3r/GUI/WebUserLoginDialog.cpp
+src/slic3r/GUI/WebGuideDialog.cpp
+src/slic3r/GUI/KBShortcutsDialog.hpp
+src/slic3r/GUI/KBShortcutsDialog.cpp
+src/slic3r/Utils/FixModelByWin10.cpp
+src/slic3r/Utils/PresetUpdater.cpp
+src/slic3r/Utils/Http.cpp
+src/slic3r/Utils/Process.cpp
+src/slic3r/GUI/Jobs/PrintJob.cpp
+src/libslic3r/GCode.cpp
+src/libslic3r/ExtrusionEntity.cpp
+src/libslic3r/Flow.cpp
+src/libslic3r/Format/AMF.cpp
+src/libslic3r/miniz_extension.cpp
+src/libslic3r/Preset.cpp
+src/libslic3r/Print.cpp
+src/libslic3r/PrintBase.cpp
+src/libslic3r/PrintConfig.cpp
+src/libslic3r/Zipper.cpp
+src/libslic3r/PrintObject.cpp
+src/libslic3r/PrintObjectSlice.cpp
+src/libslic3r/PlaceholderParser.cpp
+src/libslic3r/TreeSupport.cpp
+

bbs_test_tools/CMakeLists.txt

@@ -0,0 +1,4 @@
+# Add individual tools as executables in separate directories
+add_subdirectory(bbs_gcode_checker)
+
+install(TARGETS bbs_gcode_checker RUNTIME DESTINATION "${CMAKE_INSTALL_PREFIX}")

bbs_test_tools/bbs_gcode_checker/CMakeLists.txt

@@ -0,0 +1,6 @@
+cmake_minimum_required (VERSION 3.8)
+
+project ("bbs_gcode_checker")
+
+add_executable (bbs_gcode_checker "main.cpp" "GCodeChecker.cpp" "GCodeChecker.h" )
+

bbs_test_tools/bbs_gcode_checker/GCodeChecker.cpp

@@ -0,0 +1,602 @@
+#include "GCodeChecker.h"
+#include <fstream>
+#include <math.h>
+#include <map>
+
+namespace BambuStudio {
+
+//BBS: only check wodth when dE is longer than this value
+const double CHECK_WIDTH_E_THRESHOLD = 0.0025;
+const double WIDTH_THRESHOLD = 0.012;
+const double RADIUS_THRESHOLD = 0.005;
+
+const double filament_diameter = 1.75;
+const double Pi = 3.14159265358979323846;
+
+const std::string Extrusion_Role_Tag = " FEATURE: ";
+const std::string Width_Tag          = " LINE_WIDTH: ";
+const std::string Wipe_Start_Tag     = " WIPE_START";
+const std::string Wipe_End_Tag       = " WIPE_END";
+const std::string Layer_Change_Tag   = " CHANGE_LAYER";
+const std::string Height_Tag         = " LAYER_HEIGHT: ";
+
+GCodeCheckResult GCodeChecker::parse_file(const std::string& path)
+{
+    std::ifstream file(path);
+    if (file.fail()) {
+        std::cout << "Failed to open file " << path << std::endl;
+        return GCodeCheckResult::ParseFailed;
+    }
+    std::string line_raw;
+    std::string line;
+    while (std::getline(file, line_raw)) {
+        const char *c = line_raw.c_str();
+        c = skip_whitespaces(c);
+        if (std::toupper(*c) == 'N')
+            c = skip_word(c);
+        c = skip_whitespaces(c);
+        line = c;
+        if (parse_line(line) != GCodeCheckResult::Success) {
+            std::cout << "Failed to parse line " << line_raw << std::endl;
+            return GCodeCheckResult::ParseFailed;
+        }
+    }
+
+    if (m_layer_num == 0) {
+        std::cout << "Invalid gcode file without layer change comment" << std::endl;
+        return GCodeCheckResult::ParseFailed;
+    }
+
+    return GCodeCheckResult::Success;
+}
+
+bool GCodeChecker::include_chinese(const char* str)
+{
+   char c;
+   while(1)
+   {
+       c=*str++;
+       if (is_end_of_line(c))
+           break;
+       if ((c & 0x80) && (*str & 0x80))
+           return true;
+   }
+   return false;
+}
+
+GCodeCheckResult GCodeChecker::parse_line(const std::string& line)
+{
+    // update start position
+    m_start_position = m_end_position;
+
+    GCodeCheckResult ret;
+    const char *c = skip_whitespaces(line.c_str());
+    if (include_chinese(c)) {
+        //chinese is forbidden
+        return GCodeCheckResult::ParseFailed;
+    } if (is_end_of_line(*c)) {
+        //BBS: skip empty line
+        return GCodeCheckResult::Success;
+    } else if (is_comment_line(*c)) {
+        GCodeLine gcode_line;
+        gcode_line.m_raw = c;
+        ret = parse_comment(gcode_line);
+        if (ret != GCodeCheckResult::Success)
+            return ret;
+    } else {
+        GCodeLine gcode_line;
+        gcode_line.m_raw = c;
+        ret = parse_command(gcode_line);
+        if (ret != GCodeCheckResult::Success)
+            return ret;
+        ret = check_line_width(gcode_line);
+        if (ret != GCodeCheckResult::Success)
+            return ret;
+    }
+
+    return GCodeCheckResult::Success;
+}
+
+GCodeCheckResult GCodeChecker::parse_comment(GCodeLine& line)
+{
+    const char *c = line.m_raw.c_str();
+    c++;
+    std::string comment = c;
+    // extrusion role tag
+    if (starts_with(comment, Extrusion_Role_Tag)) {
+        m_role = string_to_role(comment.substr(Extrusion_Role_Tag.length()));
+    } else if (starts_with(comment, Wipe_Start_Tag)) {
+        m_wiping = true;
+    } else if (starts_with(comment, Wipe_End_Tag)) {
+        m_wiping = false;
+    } else if (starts_with(comment, Height_Tag)) {
+        std::string str = comment.substr(Height_Tag.size());
+        if (!parse_double_from_str(str, m_height)) {
+            std::cout << "invalid height comment with invalid value!" << std::endl;
+            return GCodeCheckResult::ParseFailed;
+        }
+    } else if (starts_with(comment, Width_Tag)) {
+        std::string str = comment.substr(Width_Tag.size());
+        if (!parse_double_from_str(str, m_width)) {
+            std::cout << "invalid width comment with invalid value!" << std::endl;
+            return GCodeCheckResult::ParseFailed;
+        }
+    } else if (starts_with(comment, Layer_Change_Tag)) {
+        m_layer_num++;
+    }
+
+    return GCodeCheckResult::Success;
+}
+
+GCodeCheckResult GCodeChecker::parse_command(GCodeLine& gcode_line)
+{
+    const std::string cmd = gcode_line.cmd();
+    GCodeCheckResult ret = GCodeCheckResult::Success;
+    switch (::toupper(cmd[0])) {
+        case 'G':
+        {
+            switch (::atoi(&cmd[1]))
+            {
+                case 0:
+                case 1:  { ret = parse_G0_G1(gcode_line); break; }  // Move
+                case 2:
+                case 3:  { ret = parse_G2_G3(gcode_line); break; }  // Move
+                case 90: { ret = parse_G90(gcode_line); break; }    // Set to Absolute Positioning
+                case 91: { ret = parse_G91(gcode_line); break; }    // Set to Relative Positioning
+                case 92: { ret = parse_G92(gcode_line); break; }    // Set Position
+                default: { break; }
+            }
+            break;
+        }
+        case 'M':{
+            switch (::atoi(&cmd[1]))
+            {
+                case 82: { ret = parse_M82(gcode_line); break; }    // Set to Absolute extrusion
+                case 83: { ret = parse_M83(gcode_line); break; }    // Set to Relative extrusion
+                default: { break; }
+            }
+            break;
+        }
+        case 'T':{
+            break;
+        }
+        default: {
+            //BBS: other g command? impossible! must be invalid
+            ret = GCodeCheckResult::ParseFailed;
+            break;
+        }
+    }
+
+    return ret;
+}
+
+GCodeCheckResult GCodeChecker::parse_axis(GCodeLine& gcode_line)
+{
+    const std::string cmd = gcode_line.m_raw;
+    const char* c = cmd.c_str();
+    c = skip_word(c);
+    while (! is_end_of_gcode_line(*c)) {
+        c = skip_whitespaces(c);
+        if (is_end_of_gcode_line(*c))
+            break;
+
+        Axis axis = UNKNOWN_AXIS;
+        switch (*c) {
+        case 'X': axis = X; break;
+        case 'Y': axis = Y; break;
+        case 'Z': axis = Z; break;
+        case 'E': axis = E; break;
+        case 'F': axis = F; break;
+        case 'I': axis = I; break;
+        case 'J': axis = J; break;
+        default:
+            //BBS: invalid command which has invalid axis
+            std::cout << "Invalid gcode because of invalid axis!" << std::endl;
+            return GCodeCheckResult::ParseFailed;
+        }
+
+        char   *pend = nullptr;
+        double v = strtod(++c, &pend);
+        if (pend != nullptr && is_end_of_word(*pend) && !isnan(v) && !isinf(v)) {
+	        gcode_line.m_axis[int(axis)] = v;
+            if (gcode_line.m_mask & (1 << int(axis))) {
+                //BBS: invalid command which has duplicated axis
+                std::cout << "Invalid gcode because of duplicated axis!" << std::endl;
+                return GCodeCheckResult::ParseFailed;
+            } else {
+                gcode_line.m_mask |= 1 << int(axis);
+            }
+            if (c == pend) {
+                //BBS: invalid command which has invalid axis value
+                std::cout << "Invalid gcode because of invalid axis value!" << std::endl;
+                return GCodeCheckResult::ParseFailed;
+            }
+            c = pend;
+        } else {
+            //BBS: invalid command for invalid axis value
+            std::cout << "Invalid gcode because of invalid axis value!" << std::endl;
+            return GCodeCheckResult::ParseFailed;
+        }
+    }
+
+    return GCodeCheckResult::Success;
+}
+
+GCodeCheckResult GCodeChecker::parse_G0_G1(GCodeLine& gcode_line)
+{
+    if (parse_axis(gcode_line) != GCodeCheckResult::Success)
+        return GCodeCheckResult::ParseFailed;
+
+    //BBS: invalid G1 command which has no axis or invalid axis
+    if ((!gcode_line.m_mask) ||
+        gcode_line.has(I) ||
+        gcode_line.has(J)) {
+        std::cout << "Invalid G0_G1 gcode because of no axis or invalid axis!" << std::endl;
+        return GCodeCheckResult::ParseFailed;
+    }
+
+    //BBS: invalid G1 command which has zero speed
+    if (gcode_line.has(F) && gcode_line.get(F) == 0.0) {
+        std::cout << "Invalid G0_G1 gcode because has F axis but 0 speed!" << std::endl;
+        return GCodeCheckResult::ParseFailed;
+    }
+
+    return GCodeCheckResult::Success;
+}
+
+GCodeCheckResult GCodeChecker::parse_G2_G3(GCodeLine& gcode_line)
+{
+    if (parse_axis(gcode_line) != GCodeCheckResult::Success)
+        return GCodeCheckResult::ParseFailed;
+
+    //BBS: invalid G2_G3 command which has no axis or Z axis
+    if (!gcode_line.m_mask) {
+        std::cout << "Invalid G2_G3 gcode because of no axis or has Z axis!" << std::endl;
+        return GCodeCheckResult::ParseFailed;
+    }
+    //BBS: invalid G2_G3 command which has zero speed
+    if (gcode_line.has(F) && gcode_line.get(F) == 0.0) {
+        std::cout << "Invalid G2_G3 gcode because has F axis but 0 speed!" << std::endl;
+        return GCodeCheckResult::ParseFailed;
+    }
+    //BBS: invalid G2_G3 command which has no I and J axis
+    if (!gcode_line.has(I) &&
+        !gcode_line.has(J)) {
+        std::cout << "Invalid G2_G3 gcode because of no I and J axis at same time!" << std::endl;
+        return GCodeCheckResult::ParseFailed;
+    }
+    //BBS: invalid G2_G3 command which has no X and Y axis at same time
+    if (!gcode_line.has(X) &&
+        !gcode_line.has(Y)) {
+        if (!gcode_line.has(X) || !gcode_line.has(P) || (int)gcode_line.get(P) != 1) {
+            std::cout << "Invalid G2_G3 gcode because of no X and Y axis at same time!" << std::endl;
+            return GCodeCheckResult::ParseFailed;
+        }
+    }
+
+    return GCodeCheckResult::Success;
+}
+
+GCodeCheckResult GCodeChecker::parse_G90(const GCodeLine& gcode_line)
+{
+    const char* c = gcode_line.m_raw.c_str();
+    //BBS: G90 is single command with no argument
+    if (!is_single_gcode_word(c)) {
+        std::cout << "Invalid G90 gcode with invalid end!" << std::endl;
+        return GCodeCheckResult::ParseFailed;
+    }
+    m_global_positioning_type = EPositioningType::Absolute;
+    return GCodeCheckResult::Success;
+}
+
+GCodeCheckResult GCodeChecker::parse_G91(const GCodeLine& gcode_line)
+{
+    const char* c = gcode_line.m_raw.c_str();
+    //BBS: G91 is single command with no argument
+    if (!is_single_gcode_word(c)) {
+        std::cout << "Invalid G91 gcode with invalid end!" << std::endl;
+        return GCodeCheckResult::ParseFailed;
+    }
+    m_global_positioning_type = EPositioningType::Relative;
+    return GCodeCheckResult::Success;
+}
+
+GCodeCheckResult GCodeChecker::parse_G92(GCodeLine& gcode_line)
+{
+    if (parse_axis(gcode_line) != GCodeCheckResult::Success)
+        return GCodeCheckResult::ParseFailed;
+
+    //BBS: invalid G92 command which has no axis or invalid axis
+    if (!gcode_line.m_mask ||
+        gcode_line.has(F) ||
+        gcode_line.has(I) ||
+        gcode_line.has(J)) {
+        std::cout << "Invalid G2_G3 gcode because of no axis or invalid axis!" << std::endl;
+        return GCodeCheckResult::ParseFailed;
+    }
+
+    if (gcode_line.has(X))
+        m_origin[X] = m_end_position[X] - gcode_line.get(X);
+
+    if (gcode_line.has(Y))
+        m_origin[Y] = m_end_position[Y] - gcode_line.get(Y);
+
+    if (gcode_line.has(Z))
+        m_origin[Z] = m_end_position[Z] - gcode_line.get(Z);
+
+    if (gcode_line.has(E))
+        m_end_position[E] = gcode_line.get(E);
+
+    for (unsigned char a = X; a <= E; ++a) {
+        m_origin[a] = m_end_position[a];
+    }
+
+    return GCodeCheckResult::Success;
+}
+
+GCodeCheckResult GCodeChecker::parse_M82(const GCodeLine& gcode_line)
+{
+    const char* c = gcode_line.m_raw.c_str();
+    //BBS: M82 is single command with no argument
+    if (!is_single_gcode_word(c)) {
+        std::cout << "Invalid M82 gcode with invalid end!" << std::endl;
+        return GCodeCheckResult::ParseFailed;
+    }
+    m_e_local_positioning_type = EPositioningType::Absolute;
+    return GCodeCheckResult::Success;
+}
+
+GCodeCheckResult GCodeChecker::parse_M83(const GCodeLine& gcode_line)
+{
+    const char* c = gcode_line.m_raw.c_str();
+    //BBS: M83 is single command with no argument
+    if (!is_single_gcode_word(c)) {
+        std::cout << "Invalid M83 gcode with invalid end!" << std::endl;
+        return GCodeCheckResult::ParseFailed;
+    }
+    m_e_local_positioning_type = EPositioningType::Relative;
+    return GCodeCheckResult::Success;
+}
+
+double GCodeChecker::calculate_G1_width(const std::array<double, 3>& source,
+                                       const std::array<double, 3>& target,
+                                       double e, double height, bool is_bridge) const
+{
+    double volume = e * Pi * (filament_diameter/2.0f) * (filament_diameter/2.0f);
+    std::array<double, 3> delta = { target[0] - source[0],
+                                   target[1] - source[1],
+                                   target[2] - source[2] };
+    double length = sqrt(delta[0] * delta[0] + delta[1] * delta[1] + delta[2] * delta[2]);
+    double mm3_per_mm = volume / length;
+    return is_bridge? 2 * sqrt(mm3_per_mm/Pi) :
+           (mm3_per_mm / height) + height * (1 - 0.25 * Pi);
+}
+
+double GCodeChecker::calculate_G2_G3_width(const std::array<double, 2>& source,
+                                          const std::array<double, 2>& target,
+                                          const std::array<double, 2>& center,
+                                          bool is_ccw, double e, double height,
+                                          bool is_bridge) const
+{
+    std::array<double, 2> v1 = { source[0] - center[0], source[1] - center[1] };
+    std::array<double, 2> v2 = { target[0] - center[0], target[1] - center[1] };
+
+    double dot = v1[0] * v2[0] + v1[1] * v2[1];
+    double cross = v1[0] * v2[1] - v1[1] * v2[0];
+    double radian = atan2(cross, dot);
+    radian = is_ccw ?
+        (radian < 0 ? 2 * Pi + radian : radian) :
+        (radian < 0 ? -radian : 2 * Pi - radian);
+    double radius = sqrt(v1[0] * v1[0] + v1[1] * v1[1]);
+    double length = radius * radian;
+    double volume = e * Pi * (filament_diameter/2) * (filament_diameter/2);
+    double mm3_per_mm = volume / length;
+    return is_bridge? 2 * sqrt(mm3_per_mm/Pi) :
+           (mm3_per_mm / height) + height * (1 - 0.25 * Pi);
+}
+
+GCodeCheckResult GCodeChecker::check_line_width(const GCodeLine& gcode_line)
+{
+    //BBS: don't need to check extrusion before first layer
+    if (m_layer_num <= 0) {
+        return GCodeCheckResult::Success;
+    }
+
+    GCodeCheckResult ret = GCodeCheckResult::Success;
+    //BBS: only need to handle G0 G1 G2 G3
+    const std::string cmd = gcode_line.cmd();
+    int cmd_id = ::atoi(&cmd[1]);
+    if (::toupper(cmd[0]) == 'G')
+        switch (::atoi(&cmd[1]))
+        {
+            case 0:
+            case 1:  { ret = check_G0_G1_width(gcode_line); break; }
+            case 2:
+            case 3:  { ret = check_G2_G3_width(gcode_line); break; }
+            default: { break; }
+        }
+
+    return ret;
+}
+
+GCodeCheckResult GCodeChecker::check_G0_G1_width(const GCodeLine& line)
+{
+    auto absolute_position = [this](Axis axis, const GCodeLine& lineG1) {
+        bool is_relative = (m_global_positioning_type == EPositioningType::Relative);
+        if (axis == E)
+            is_relative |= (m_e_local_positioning_type == EPositioningType::Relative);
+
+        if (lineG1.has(Axis(axis))) {
+            double ret = lineG1.get(Axis(axis));
+            return is_relative ? m_start_position[axis] + ret : m_origin[axis] + ret;
+        } else
+            return m_start_position[axis];
+    };
+
+    auto move_type = [this](const std::array<double, 4>& delta_pos) {
+        EMoveType type = EMoveType::Noop;
+
+        if (m_wiping)
+            type = EMoveType::Wipe;
+        else if (delta_pos[E] < 0.0f)
+            type = (delta_pos[X] != 0.0f || delta_pos[Y] != 0.0f || delta_pos[Z] != 0.0f) ? EMoveType::Travel : EMoveType::Retract;
+        else if (delta_pos[E] > 0.0f) {
+            if (delta_pos[X] == 0.0f && delta_pos[Y] == 0.0f)
+                type = (delta_pos[Z] == 0.0f) ? EMoveType::Unretract : EMoveType::Travel;
+            else if (delta_pos[X] != 0.0f || delta_pos[Y] != 0.0f)
+                type = EMoveType::Extrude;
+        } 
+        else if (delta_pos[X] != 0.0f || delta_pos[Y] != 0.0f || delta_pos[Z] != 0.0f)
+            type = EMoveType::Travel;
+
+        return type;
+    };
+    
+    for (unsigned char a = X; a <= E; ++a) {
+        m_end_position[a] = absolute_position((Axis)a, line);
+    }
+
+    // calculates movement deltas
+    std::array<double, 4> delta_pos;
+    for (unsigned char a = X; a <= E; ++a)
+        delta_pos[a] = m_end_position[a] - m_start_position[a];
+
+    // Todo: currently, for precision, there alwasy has possible to generate
+    // such gcode because of decimal truncation
+    /*if (line.has(Axis(E)) && delta_pos[E] == 0.0 && !m_wiping) {
+        std::cout << "Invalid GCode because has E axis but 0 extrusion" << std::endl;
+        return GCodeCheckResult::CheckFailed;
+    }*/
+
+    EMoveType type = move_type(delta_pos);
+    if (type == EMoveType::Extrude && m_end_position[Z] == 0.0f)
+        type = EMoveType::Travel;
+
+    //BBS: calculate line width and compare.
+    //Don't need to check gap fill which has verious width
+    if (type == EMoveType::Extrude &&
+        m_role != erGapFill &&
+        delta_pos[E] > CHECK_WIDTH_E_THRESHOLD) {
+        std::array<double, 3> source = { m_start_position[X], m_start_position[Y], m_start_position[Z] };
+        std::array<double, 3> target = { m_end_position[X], m_end_position[Y], m_end_position[Z] };
+
+        bool is_bridge = m_role == erOverhangPerimeter || m_role == erBridgeInfill;
+        double width_real = calculate_G1_width(source, target, delta_pos[E], m_height, is_bridge);
+        if (fabs(width_real - m_width) > WIDTH_THRESHOLD) {
+            std::cout << "Invalid G0_G1 because has abnormal line width." << std::endl;
+            std::cout << "Width: " << m_width << " Width_real: " << width_real <<  std::endl;
+            return GCodeCheckResult::CheckFailed;
+        }
+    }
+
+    return GCodeCheckResult::Success;
+}
+
+GCodeCheckResult GCodeChecker::check_G2_G3_width(const GCodeLine& line)
+{
+    auto absolute_position = [this](Axis axis, const GCodeLine& lineG2_3) {
+        bool is_relative = (m_global_positioning_type == EPositioningType::Relative);
+        if (axis == E)
+            is_relative |= (m_e_local_positioning_type == EPositioningType::Relative);
+
+        if (lineG2_3.has(Axis(axis))) {
+            double ret = lineG2_3.get(Axis(axis));
+            if (axis == I)
+                return m_start_position[X] + ret;
+            else if (axis == J)
+                return m_start_position[Y] + ret;
+            else
+                return is_relative ? m_start_position[axis] + ret : m_origin[axis] + ret;
+        } else {
+            if (axis == I)
+                return m_start_position[X];
+            else if (axis == J)
+                return m_start_position[Y];
+            else
+                return m_start_position[axis];
+        }
+    };
+
+     auto move_type = [this](const double& delta_E) {
+        EMoveType type = EMoveType::Noop;
+
+        if (m_wiping)
+            type = EMoveType::Wipe;
+        else if (delta_E < 0.0f || delta_E == 0.0f)
+            type = EMoveType::Travel;
+        else
+            type = EMoveType::Extrude;
+
+        return type;
+    };
+
+    for (unsigned char a = X; a <= E; ++a) {
+        m_end_position[a] = absolute_position((Axis)a, line);
+    }
+    std::array<double, 2> source = { m_start_position[X], m_start_position[Y] };
+    std::array<double, 2> target = { m_end_position[X], m_end_position[Y] };
+    std::array<double, 2> center = { absolute_position(I, line),absolute_position(J, line) };
+    const std::string& cmd = line.cmd();
+    bool is_ccw = (::atoi(&cmd[1]) == 2) ? false : true;
+    double delta_e = m_end_position[E] - m_start_position[E];
+    EMoveType type = move_type(delta_e);
+
+    //BBS: judge whether is normal arc by radius
+    double radius1 = sqrt(pow((source[0] - center[0]), 2) + pow((source[1] - center[1]), 2));
+    double radius2 = sqrt(pow((target[0] - center[0]), 2) + pow((target[1] - center[1]), 2));
+    if (fabs(radius2 - radius1) > RADIUS_THRESHOLD) {
+        std::cout << "Invalid G2_G3 because of abnormal radius." << std::endl;
+        std::cout << "radius1: " << radius1 << " radius2: " << radius2 <<  std::endl;
+        return GCodeCheckResult::CheckFailed;
+    }
+
+    //BBS: calculate line width and compare
+    //Don't need to check gap fill which has verious width
+    if (type == EMoveType::Extrude &&
+        m_role != erGapFill &&
+        delta_e > CHECK_WIDTH_E_THRESHOLD) {
+        bool is_bridge = m_role == erOverhangPerimeter || m_role == erBridgeInfill;
+        double width_real = calculate_G2_G3_width(source, target, center, is_ccw, delta_e, m_height, is_bridge);
+        if (fabs(width_real - m_width) > WIDTH_THRESHOLD) {
+            std::cout << "Invalid G2_G3 because has abnormal line width." << std::endl;
+            std::cout << "Width: " << m_width << " Width_real: " << width_real <<  std::endl;
+            return GCodeCheckResult::CheckFailed;
+        }
+    }
+
+    return GCodeCheckResult::Success;
+}
+
+const std::map<std::string, ExtrusionRole> string_to_role_map = {
+    { "Inner wall",                 erPerimeter },
+    { "Outer wall",                 erExternalPerimeter },
+    { "Overhang wall",              erOverhangPerimeter },
+    { "Sparse infill",              erInternalInfill },
+    { "Internal solid infill",      erSolidInfill },
+    { "Top surface",                erTopSolidInfill },
+    { "Bottom surface",             erBottomSurface },
+    { "Ironing",                    erIroning },
+    { "Bridge",                     erBridgeInfill },
+    { "Gap infill",                 erGapFill },
+    { "Skirt",                      erSkirt },
+    { "Brim",                       erBrim },
+    { "Support",                    erSupportMaterial },
+    { "Support interface",          erSupportMaterialInterface },
+    { "Support transition",         erSupportTransition },
+    { "Prime tower",                erWipeTower },
+    { "Custom",                     erCustom },
+    { "Mixed",                      erMixed }
+};
+
+ExtrusionRole GCodeChecker::string_to_role(const std::string &role)
+{
+    for (auto it = string_to_role_map.begin(); it != string_to_role_map.end(); it++) {
+        if (role == it->first)
+            return it->second;
+    }
+    return erNone;
+}
+
+}
+
+

bbs_test_tools/bbs_gcode_checker/GCodeChecker.h

@@ -0,0 +1,181 @@
+#ifndef _GCodeChecker_H_
+#define _GCodeChecker_H_
+
+#include <iostream>
+#include <string>
+#include <vector>
+#include <array>
+
+namespace BambuStudio {
+
+enum class GCodeCheckResult : unsigned char
+{
+    Success,
+    ParseFailed,
+    CheckFailed,
+    Count
+};
+
+enum class EMoveType : unsigned char
+{
+    Noop,
+    Retract,
+    Unretract,
+    Tool_change,
+    Color_change,
+    Pause_Print,
+    Custom_GCode,
+    Travel,
+    Wipe,
+    Extrude,
+    Count
+};
+
+enum Axis {
+    X=0,
+    Y,
+    Z,
+    E,
+    F,
+    I,
+    J,
+    P,
+    NUM_AXES,
+    UNKNOWN_AXIS = NUM_AXES,
+};
+
+enum ExtrusionRole : uint8_t {
+    erNone,
+    erPerimeter,
+    erExternalPerimeter,
+    erOverhangPerimeter,
+    erInternalInfill,
+    erSolidInfill,
+    erTopSolidInfill,
+    erBottomSurface,
+    erIroning,
+    erBridgeInfill,
+    erGapFill,
+    erSkirt,
+    erBrim,
+    erSupportMaterial,
+    erSupportMaterialInterface,
+    erSupportTransition,
+    erWipeTower,
+    erCustom,
+    // Extrusion role for a collection with multiple extrusion roles.
+    erMixed,
+    erCount
+};
+
+class GCodeChecker {
+public:
+    class GCodeLine {
+    public:
+        GCodeLine() {}
+        const std::string cmd() const {
+            const char *cmd = GCodeChecker::skip_whitespaces(m_raw.c_str());
+            return std::string(cmd, GCodeChecker::skip_word(cmd) - cmd);
+        }
+
+        bool has(Axis axis) const { return (m_mask & (1 << int(axis))) != 0;  }
+        double get(Axis axis) const { return m_axis[int(axis)]; }
+
+        std::string   m_raw;
+        double        m_axis[NUM_AXES] = { 0.0f };
+        uint32_t      m_mask = 0;
+    };
+
+    enum class EPositioningType : unsigned char
+    {
+        Absolute,
+        Relative
+    };
+
+    GCodeChecker() {}
+    GCodeCheckResult parse_file(const std::string& path);
+
+private:
+    bool include_chinese(const char* str);
+    GCodeCheckResult parse_line(const std::string& line);
+
+    GCodeCheckResult parse_command(GCodeLine& gcode_line);
+    GCodeCheckResult parse_axis(GCodeLine& gcode_line);
+    GCodeCheckResult parse_G0_G1(GCodeLine& gcode_line);
+    GCodeCheckResult parse_G2_G3(GCodeLine& gcode_line);
+    GCodeCheckResult parse_G90(const GCodeLine& gcode_line);
+    GCodeCheckResult parse_G91(const GCodeLine& gcode_line);
+    GCodeCheckResult parse_G92(GCodeLine& gcode_line);
+    GCodeCheckResult parse_M82(const GCodeLine& gcode_line);
+    GCodeCheckResult parse_M83(const GCodeLine& gcode_line);
+
+    GCodeCheckResult parse_comment(GCodeLine& gcode_line);
+
+    GCodeCheckResult check_line_width(const GCodeLine& gcode_line);
+    GCodeCheckResult check_G0_G1_width(const GCodeLine& gcode_line);
+    GCodeCheckResult check_G2_G3_width(const GCodeLine& gcode_line);
+
+    double calculate_G1_width(const std::array<double, 3>& source,
+                             const std::array<double, 3>& target,
+                             double e, double height, bool is_bridge) const;
+    double calculate_G2_G3_width(const std::array<double, 2>& source,
+                                const std::array<double, 2>& target,
+                                const std::array<double, 2>& center,
+                                bool is_ccw, double e, double height, bool is_bridge) const;
+
+public:
+    static bool is_whitespace(char c) { return c == ' ' || c == '\t'; }
+    static bool is_end_of_line(char c) { return c == '\r' || c == '\n' || c == 0; }
+    static bool is_comment_line(char c) { return c == ';'; }
+    static bool is_end_of_gcode_line(char c) { return is_comment_line(c) || is_end_of_line(c); }
+    static bool is_end_of_word(char c) { return is_whitespace(c) || is_end_of_gcode_line(c); }
+    static const char*  skip_word(const char *c) { 
+        for (; ! is_end_of_word(*c); ++ c)
+            ; // silence -Wempty-body
+        return c;
+    }
+    static const char*  skip_whitespaces(const char *c) { 
+        for (; is_whitespace(*c); ++ c)
+            ; // silence -Wempty-body
+        return c;
+    }
+    static bool is_single_gcode_word(const char* c) {
+        c = skip_word(c);
+        c = skip_whitespaces(c);
+        return is_end_of_gcode_line(*c);
+    }
+    static bool starts_with(const std::string &comment, const std::string &tag) {
+        size_t tag_len = tag.size();
+        return comment.size() >= tag_len && comment.substr(0, tag_len) == tag;
+    }
+    static ExtrusionRole string_to_role(const std::string& role);
+    //BBS: Returns true if the number was parsed correctly into out and the number spanned the whole input string.
+    static bool parse_double_from_str(const std::string& input, double& out) {
+        size_t read = 0;
+        try {
+            out = std::stod(input, &read);
+            return input.size() == read;
+        } catch (...) {
+            return false;
+        }
+    }
+
+private:
+    EPositioningType m_global_positioning_type = EPositioningType::Absolute;
+    EPositioningType m_e_local_positioning_type = EPositioningType::Absolute;
+
+    std::array<double, 4> m_start_position = { 0.0, 0.0, 0.0, 0.0 };
+    std::array<double, 4> m_end_position = { 0.0, 0.0, 0.0, 0.0 };
+    std::array<double, 4> m_origin = { 0.0, 0.0, 0.0, 0.0 };
+
+    //BBS: use these value to save information from comment
+    ExtrusionRole m_role = erNone;
+    bool m_wiping = false;
+    int m_layer_num = 0;
+    double m_height = 0.0;
+    double m_width = 0.0;
+};
+
+}
+
+#endif

bbs_test_tools/bbs_gcode_checker/main.cpp

@@ -0,0 +1,24 @@
+#include "GCodeChecker.h"
+
+using namespace std;
+using namespace BambuStudio;
+
+int main(int argc, char *argv[])
+{
+    if (argc != 2) {
+        cout << "Invalid input arguments" << endl;
+        return -1;
+    }
+    string path(argv[1]);
+    cout << "Start to check file " << path << endl;
+    GCodeChecker checker;
+
+    //BBS: parse and check whether has invalid gcode
+    if (checker.parse_file(path) != GCodeCheckResult::Success) {
+        cout << "Failed to parse and check file " << path << endl;
+        return -1;
+    }
+
+    cout << "Success to parse and check file" << path << endl;
+    return 0;
+}

build_flatpak.sh

@@ -1,341 +0,0 @@
-#!/bin/bash
-
-# OrcaSlicer Flatpak Build Script
-# This script builds and packages OrcaSlicer as a Flatpak package locally
-# Based on the GitHub Actions workflow in .github/workflows/build_all.yml
-
-set -e
-
-# Colors for output
-RED='\033[0;31m'
-GREEN='\033[0;32m'
-YELLOW='\033[1;33m'
-BLUE='\033[0;34m'
-NC='\033[0m' # No Color
-
-# Default values
-ARCH=$(uname -m)
-BUILD_DIR="build_flatpak"
-CLEANUP=false
-INSTALL_RUNTIME=false
-JOBS=$(nproc)
-FORCE_CLEAN=false
-ENABLE_CCACHE=false
-CACHE_DIR=".flatpak-builder"
-
-# Help function
-show_help() {
-    echo "Usage: $0 [OPTIONS]"
-    echo ""
-    echo "Build OrcaSlicer as a Flatpak package"
-    echo ""
-    echo "Options:"
-    echo "  -a, --arch ARCH        Target architecture (x86_64, aarch64) [default: $ARCH]"
-    echo "  -d, --build-dir DIR    Build directory [default: $BUILD_DIR]"
-    echo "  -j, --jobs JOBS        Number of parallel build jobs for flatpak-builder and modules [default: $JOBS]"
-    echo "  -c, --cleanup          Clean build directory before building"
-    echo "  -f, --force-clean      Force clean build (disables caching)"
-    echo "  --ccache               Enable ccache for faster rebuilds (requires ccache in SDK)"
-    echo "  --cache-dir DIR        Flatpak builder cache directory [default: $CACHE_DIR]"
-    echo "  -i, --install-runtime  Install required Flatpak runtime and SDK"
-    echo "  -h, --help             Show this help message"
-    echo ""
-    echo "Examples:"
-    echo "  $0                     # Build for current architecture with caching enabled"
-    echo "  $0 -f                  # Force clean build (no caching)"
-    echo "  $0 --ccache -j 8       # Use ccache and 8 parallel jobs for faster builds"
-    echo "  $0 -a x86_64 -c       # Build for x86_64 and cleanup first"
-    echo "  $0 -i -j 16 --ccache  # Install runtime, build with 16 jobs and ccache"
-}
-
-# Parse command line arguments
-while [[ $# -gt 0 ]]; do
-    case $1 in
-        -a|--arch)
-            ARCH="$2"
-            shift 2
-            ;;
-        -d|--build-dir)
-            BUILD_DIR="$2"
-            shift 2
-            ;;
-        -j|--jobs)
-            JOBS="$2"
-            shift 2
-            ;;
-        -c|--cleanup)
-            CLEANUP=true
-            shift
-            ;;
-        -f|--force-clean)
-            FORCE_CLEAN=true
-            shift
-            ;;
-        --ccache)
-            ENABLE_CCACHE=true
-            shift
-            ;;
-        --cache-dir)
-            CACHE_DIR="$2"
-            shift 2
-            ;;
-        -i|--install-runtime)
-            INSTALL_RUNTIME=true
-            shift
-            ;;
-        -h|--help)
-            show_help
-            exit 0
-            ;;
-        *)
-            echo -e "${RED}Error: Unknown option $1${NC}"
-            show_help
-            exit 1
-            ;;
-    esac
-done
-
-# Validate architecture
-if [[ "$ARCH" != "x86_64" && "$ARCH" != "aarch64" ]]; then
-    echo -e "${RED}Error: Unsupported architecture '$ARCH'. Supported: x86_64, aarch64${NC}"
-    exit 1
-fi
-
-# Validate jobs parameter
-if ! [[ "$JOBS" =~ ^[1-9][0-9]*$ ]]; then
-    echo -e "${RED}Error: Jobs must be a positive integer, got '$JOBS'${NC}"
-    exit 1
-fi
-
-echo -e "${BLUE}OrcaSlicer Flatpak Build Script${NC}"
-echo -e "${BLUE}================================${NC}"
-echo -e "Architecture: ${GREEN}$ARCH${NC}"
-echo -e "Build directory: ${GREEN}$BUILD_DIR${NC}"
-echo -e "Cache directory: ${GREEN}$CACHE_DIR${NC}"
-echo -e "Parallel jobs: ${GREEN}$JOBS${NC}"
-if [[ "$FORCE_CLEAN" == true ]]; then
-    echo -e "Cache mode: ${RED}DISABLED (force clean)${NC}"
-else
-    echo -e "Cache mode: ${GREEN}ENABLED${NC}"
-fi
-if [[ "$ENABLE_CCACHE" == true ]]; then
-    echo -e "Ccache: ${GREEN}ENABLED${NC}"
-else
-    echo -e "Ccache: ${YELLOW}DISABLED${NC}"
-fi
-echo ""
-
-# Check available disk space (flatpak builds need several GB)
-AVAILABLE_SPACE=$(df . | awk 'NR==2 {print $4}')
-REQUIRED_SPACE=$((5 * 1024 * 1024))  # 5GB in KB
-
-if [[ $AVAILABLE_SPACE -lt $REQUIRED_SPACE ]]; then
-    echo -e "${YELLOW}Warning: Low disk space detected.${NC}"
-    echo -e "Available: $(( AVAILABLE_SPACE / 1024 / 1024 ))GB, Recommended: 5GB+"
-    echo -e "Continue anyway? (y/N)"
-    read -r response
-    if [[ ! "$response" =~ ^[Yy]$ ]]; then
-        echo "Build cancelled by user"
-        exit 1
-    fi
-fi
-
-# Check if flatpak is installed
-if ! command -v flatpak &> /dev/null; then
-    echo -e "${RED}Error: Flatpak is not installed. Please install it first.${NC}"
-    echo "On Ubuntu/Debian: sudo apt install flatpak"
-    echo "On Fedora: sudo dnf install flatpak"
-    echo "On Arch: sudo pacman -S flatpak"
-    exit 1
-fi
-
-# Check if flatpak-builder is installed
-if ! command -v flatpak-builder &> /dev/null; then
-    echo -e "${RED}Error: flatpak-builder is not installed. Please install it first.${NC}"
-    echo "On Ubuntu/Debian: sudo apt install flatpak-builder"
-    echo "On Fedora: sudo dnf install flatpak-builder"
-    echo "On Arch: sudo pacman -S flatpak-builder"
-    exit 1
-fi
-
-# Check additional build dependencies
-echo -e "${YELLOW}Checking build dependencies...${NC}"
-MISSING_DEPS=()
-
-if ! command -v cmake &> /dev/null; then
-    MISSING_DEPS+=("cmake")
-fi
-
-if ! command -v ninja &> /dev/null && ! command -v make &> /dev/null; then
-    MISSING_DEPS+=("ninja or make")
-fi
-
-if ! command -v pkg-config &> /dev/null; then
-    MISSING_DEPS+=("pkg-config")
-fi
-
-if [ ${#MISSING_DEPS[@]} -ne 0 ]; then
-    echo -e "${RED}Error: Missing required build dependencies: ${MISSING_DEPS[*]}${NC}"
-    echo "On Ubuntu/Debian: sudo apt install cmake ninja-build pkg-config"
-    echo "On Fedora: sudo dnf install cmake ninja-build pkgconfig"
-    exit 1
-fi
-
-echo -e "${GREEN}All required dependencies found${NC}"
-
-# Install runtime and SDK if requested
-if [[ "$INSTALL_RUNTIME" == true ]]; then
-    echo -e "${YELLOW}Installing GNOME runtime and SDK...${NC}"
-    flatpak install --user -y flathub org.gnome.Platform//47
-    flatpak install --user -y flathub org.gnome.Sdk//47
-fi
-
-# Check if required runtime is available
-if ! flatpak info --user org.gnome.Platform//47 &> /dev/null; then
-    echo -e "${RED}Error: GNOME Platform 47 runtime is not installed.${NC}"
-    echo "Run with -i flag to install it automatically, or install manually:"
-    echo "flatpak install --user flathub org.gnome.Platform//47"
-    exit 1
-fi
-
-if ! flatpak info --user org.gnome.Sdk//47 &> /dev/null; then
-    echo -e "${RED}Error: GNOME SDK 47 is not installed.${NC}"
-    echo "Run with -i flag to install it automatically, or install manually:"
-    echo "flatpak install --user flathub org.gnome.Sdk//47"
-    exit 1
-fi
-
-# Get version information
-echo -e "${YELLOW}Getting version information...${NC}"
-if [[ -f "version.inc" ]]; then
-    VER_PURE=$(grep 'set(SoftFever_VERSION' version.inc | cut -d '"' -f2)
-    VER="V$VER_PURE"
-    DATE=$(date +'%Y%m%d')
-    echo -e "Version: ${GREEN}$VER${NC}"
-    echo -e "Date: ${GREEN}$DATE${NC}"
-else
-    echo -e "${RED}Error: version.inc not found${NC}"
-    exit 1
-fi
-
-# Cleanup build directory if requested
-if [[ "$CLEANUP" == true ]]; then
-    echo -e "${YELLOW}Cleaning up flatpak-specific build directories...${NC}"
-    rm -rf deps/build_flatpak build_flatpak
-
-    echo -e "${YELLOW}Cleaning up flatpak build directories...${NC}"
-    rm -rf "$BUILD_DIR"
-    
-    # Only clean cache if force-clean is enabled
-    if [[ "$FORCE_CLEAN" == true ]]; then
-        echo -e "${YELLOW}Cleaning up flatpak build cache...${NC}"
-        rm -rf "$CACHE_DIR"
-    else
-        echo -e "${BLUE}Preserving build cache at: $CACHE_DIR${NC}"
-    fi
-    
-    echo -e "${BLUE}Note: Host build directories (deps/build, build) are preserved${NC}"
-fi
-
-# Create build directory
-mkdir -p "$BUILD_DIR"
-rm -rf "$BUILD_DIR/build-dir"
-
-# Check if flatpak manifest exists
-if [[ ! -f "./scripts/flatpak/io.github.softfever.OrcaSlicer.yml" ]]; then
-    echo -e "${RED}Error: Flatpak manifest not found at scripts/flatpak/io.github.softfever.OrcaSlicer.yml${NC}"
-    exit 1
-fi
-
-# Build the Flatpak
-echo -e "${YELLOW}Building Flatpak package...${NC}"
-echo -e "This may take a while (30+ minutes depending on your system)..."
-echo ""
-
-BUNDLE_NAME="OrcaSlicer-Linux-flatpak_${VER}_${ARCH}.flatpak"
-
-# Remove any existing bundle
-rm -f "$BUNDLE_NAME"
-
-# Create necessary directories inside repo
-mkdir -p "$BUILD_DIR/cache" "$BUILD_DIR/flatpak-builder"
-
-# Set environment variables to match GitHub Actions
-export FLATPAK_BUILDER_N_JOBS=$JOBS
-
-echo -e "${BLUE}Running flatpak-builder...${NC}"
-echo -e "Using $JOBS parallel jobs for flatpak-builder and $FLATPAK_BUILDER_N_JOBS for module builds"
-
-# Check flatpak-builder version to determine available options
-FLATPAK_BUILDER_VERSION=$(flatpak-builder --version 2>/dev/null | head -1 | awk '{print $2}' || echo "unknown")
-echo -e "flatpak-builder version: $FLATPAK_BUILDER_VERSION"
-
-# Build command with caching support
-BUILDER_ARGS=(
-    --arch="$ARCH"
-    --user
-    --install-deps-from=flathub
-    --repo="$BUILD_DIR/repo"
-    --verbose
-    --state-dir="$CACHE_DIR"
-    --jobs="$JOBS"
-)
-
-# Add force-clean only if explicitly requested (disables caching)
-if [[ "$FORCE_CLEAN" == true ]]; then
-    BUILDER_ARGS+=(--force-clean)
-    echo -e "${YELLOW}Using --force-clean (caching disabled)${NC}"
-else
-    echo -e "${GREEN}Using build cache for faster rebuilds${NC}"
-fi
-
-# Add ccache if enabled
-if [[ "$ENABLE_CCACHE" == true ]]; then
-    BUILDER_ARGS+=(--ccache)
-    echo -e "${GREEN}Using ccache for compiler caching${NC}"
-fi
-
-if ! flatpak-builder \
-    "${BUILDER_ARGS[@]}" \
-    "$BUILD_DIR/build-dir" \
-    scripts/flatpak/io.github.softfever.OrcaSlicer.yml; then
-    echo -e "${RED}Error: flatpak-builder failed${NC}"
-    echo -e "${YELLOW}Check the build log above for details${NC}"
-    exit 1
-fi
-
-# Create bundle
-echo -e "${YELLOW}Creating Flatpak bundle...${NC}"
-if ! flatpak build-bundle \
-    "$BUILD_DIR/repo" \
-    "$BUNDLE_NAME" \
-    io.github.softfever.OrcaSlicer \
-    --arch="$ARCH"; then
-    echo -e "${RED}Error: Failed to create Flatpak bundle${NC}"
-    exit 1
-fi
-
-# Success message
-echo ""
-echo -e "${GREEN}✓ Flatpak build completed successfully!${NC}"
-echo -e "Bundle created: ${GREEN}$BUNDLE_NAME${NC}"
-echo -e "Size: ${GREEN}$(du -h "$BUNDLE_NAME" | cut -f1)${NC}"
-if [[ "$FORCE_CLEAN" != true ]]; then
-    echo -e "Build cache: ${GREEN}$CACHE_DIR${NC} (preserved for faster future builds)"
-fi
-echo ""
-echo -e "${BLUE}To install the Flatpak:${NC}"
-echo -e "flatpak install --user $BUNDLE_NAME"
-echo ""
-echo -e "${BLUE}To run OrcaSlicer:${NC}"
-echo -e "flatpak run io.github.softfever.OrcaSlicer"
-echo ""
-echo -e "${BLUE}To uninstall:${NC}"
-echo -e "flatpak uninstall --user io.github.softfever.OrcaSlicer"
-echo ""
-if [[ "$FORCE_CLEAN" != true ]]; then
-    echo -e "${BLUE}Cache Management:${NC}"
-    echo -e "• Subsequent builds will be faster thanks to caching"
-    echo -e "• To force a clean build: $0 -f"
-    echo -e "• To clean cache manually: rm -rf $CACHE_DIR"
-fi

build_linux.sh

@@ -1,261 +0,0 @@
-#!/usr/bin/env bash
-set -e # Exit immediately if a command exits with a non-zero status.
-
-SCRIPT_NAME=$(basename "$0")
-SCRIPT_PATH=$(dirname "$(readlink -f "${0}")")
-
-pushd "${SCRIPT_PATH}" > /dev/null
-
-function usage() {
-    echo "Usage: ./${SCRIPT_NAME} [-1][-b][-c][-d][-h][-i][-j N][-p][-r][-s][-t][-u][-l][-L]"
-    echo "   -1: limit builds to one core (where possible)"
-    echo "   -j N: limit builds to N cores (where possible)"
-    echo "   -b: build in debug mode"
-    echo "   -c: force a clean build"
-    echo "   -C: enable ANSI-colored compile output (GNU/Clang only)"
-    echo "   -d: download and build dependencies in ./deps/ (build prerequisite)"
-    echo "   -h: prints this help text"
-    echo "   -i: build the Orca Slicer AppImage (optional)"
-    echo "   -p: boost ccache hit rate by disabling precompiled headers (default: ON)"
-    echo "   -r: skip RAM and disk checks (low RAM compiling)"
-    echo "   -s: build the Orca Slicer (optional)"
-    echo "   -t: build tests (optional)"
-    echo "   -u: install system dependencies (asks for sudo password; build prerequisite)"
-    echo "   -l: use Clang instead of GCC (default: GCC)"
-    echo "   -L: use ld.lld as linker (if available)"
-    echo "For a first use, you want to './${SCRIPT_NAME} -u'"
-    echo "   and then './${SCRIPT_NAME} -dsi'"
-    echo "To build with tests: './${SCRIPT_NAME} -st' or './${SCRIPT_NAME} -dst'"
-}
-
-SLIC3R_PRECOMPILED_HEADERS="ON"
-
-unset name
-while getopts ":1j:bcCdhiprstulL" opt ; do
-  case ${opt} in
-    1 )
-        export CMAKE_BUILD_PARALLEL_LEVEL=1
-        ;;
-    j )
-        export CMAKE_BUILD_PARALLEL_LEVEL=$OPTARG
-        ;;
-    b )
-        BUILD_DEBUG="1"
-        ;;
-    c )
-        CLEAN_BUILD=1
-        ;;
-    C )
-        COLORED_OUTPUT="-DCOLORED_OUTPUT=ON"
-        ;;
-    d )
-        BUILD_DEPS="1"
-        ;;
-    h ) usage
-        exit 1
-        ;;
-    i )
-        BUILD_IMAGE="1"
-        ;;
-    p )
-        SLIC3R_PRECOMPILED_HEADERS="OFF"
-        ;;
-    r )
-        SKIP_RAM_CHECK="1"
-        ;;
-    s )
-        BUILD_ORCA="1"
-        ;;
-    t )
-        BUILD_TESTS="1"
-        ;;
-    u )
-        export UPDATE_LIB="1"
-        ;;
-    l )
-        USE_CLANG="1"
-        ;;
-    L )
-        USE_LLD="1"
-        ;;
-    * )
-	echo "Unknown argument '${opt}', aborting."
-	exit 1
-	;;
-  esac
-done
-
-if [ ${OPTIND} -eq 1 ] ; then
-    usage
-    exit 1
-fi
-
-function check_available_memory_and_disk() {
-    FREE_MEM_GB=$(free --gibi --total | grep 'Mem' | rev | cut --delimiter=" " --fields=1 | rev)
-    MIN_MEM_GB=10
-
-    FREE_DISK_KB=$(df --block-size=1K . | tail -1 | awk '{print $4}')
-    MIN_DISK_KB=$((10 * 1024 * 1024))
-
-    if [[ ${FREE_MEM_GB} -le ${MIN_MEM_GB} ]] ; then
-        echo -e "\nERROR: Orca Slicer Builder requires at least ${MIN_MEM_GB}G of 'available' mem (system has only ${FREE_MEM_GB}G available)"
-        echo && free --human && echo
-        echo "Invoke with -r to skip RAM and disk checks."
-        exit 2
-    fi
-
-    if [[ ${FREE_DISK_KB} -le ${MIN_DISK_KB} ]] ; then
-        echo -e "\nERROR: Orca Slicer Builder requires at least $(echo "${MIN_DISK_KB}" |awk '{ printf "%.1fG\n", $1/1024/1024; }') (system has only $(echo "${FREE_DISK_KB}" | awk '{ printf "%.1fG\n", $1/1024/1024; }') disk free)"
-        echo && df --human-readable . && echo
-        echo "Invoke with -r to skip ram and disk checks."
-        exit 1
-    fi
-}
-
-# cmake 4.x compatibility workaround
-export CMAKE_POLICY_VERSION_MINIMUM=3.5
-
-DISTRIBUTION=$(awk -F= '/^ID=/ {print $2}' /etc/os-release | tr -d '"')
-DISTRIBUTION_LIKE=$(awk -F= '/^ID_LIKE=/ {print $2}' /etc/os-release | tr -d '"')
-# Check for direct distribution match to Ubuntu/Debian
-if [ "${DISTRIBUTION}" == "ubuntu" ] || [ "${DISTRIBUTION}" == "linuxmint" ] ; then
-    DISTRIBUTION="debian"
-# Check if distribution is Debian/Ubuntu-like based on ID_LIKE
-elif [[ "${DISTRIBUTION_LIKE}" == *"debian"* ]] || [[ "${DISTRIBUTION_LIKE}" == *"ubuntu"* ]] ; then
-    DISTRIBUTION="debian"
-elif [[ "${DISTRIBUTION_LIKE}" == *"arch"* ]] ; then
-    DISTRIBUTION="arch"
-fi
-
-if [ ! -f "./scripts/linux.d/${DISTRIBUTION}" ] ; then
-    echo "Your distribution \"${DISTRIBUTION}\" is not supported by system-dependency scripts in ./scripts/linux.d/"
-    echo "Please resolve dependencies manually and contribute a script for your distribution to upstream."
-    exit 1
-else
-    echo "resolving system dependencies for distribution \"${DISTRIBUTION}\" ..."
-    source "./scripts/linux.d/${DISTRIBUTION}"
-fi
-
-echo "FOUND_GTK3=${FOUND_GTK3}"
-if [[ -z "${FOUND_GTK3_DEV}" ]] ; then
-    echo "Error, you must install the dependencies before."
-    echo "Use option -u with sudo"
-    exit 1
-fi
-
-echo "Changing date in version..."
-{
-    # change date in version
-    sed --in-place "s/+UNKNOWN/_$(date '+%F')/" version.inc
-}
-echo "done"
-
-
-if [[ -z "${SKIP_RAM_CHECK}" ]] ; then
-    check_available_memory_and_disk
-fi
-
-export CMAKE_C_CXX_COMPILER_CLANG=""
-if [[ -n "${USE_CLANG}" ]] ; then
-    export CMAKE_C_CXX_COMPILER_CLANG="-DCMAKE_C_COMPILER=/usr/bin/clang -DCMAKE_CXX_COMPILER=/usr/bin/clang++"
-fi
-
-# Configure use of ld.lld as the linker when requested
-export CMAKE_LLD_LINKER_ARGS=""
-if [[ -n "${USE_LLD}" ]] ; then
-    if command -v ld.lld >/dev/null 2>&1 ; then
-        LLD_BIN=$(command -v ld.lld)
-        export CMAKE_LLD_LINKER_ARGS="-DCMAKE_LINKER=${LLD_BIN} -DCMAKE_EXE_LINKER_FLAGS=-fuse-ld=lld -DCMAKE_SHARED_LINKER_FLAGS=-fuse-ld=lld -DCMAKE_MODULE_LINKER_FLAGS=-fuse-ld=lld"
-    else
-        echo "Error: ld.lld not found. Please install the 'lld' package (e.g., sudo apt install lld) or omit -L."
-        exit 1
-    fi
-fi
-
-if [[ -n "${BUILD_DEPS}" ]] ; then
-    echo "Configuring dependencies..."
-    BUILD_ARGS="${DEPS_EXTRA_BUILD_ARGS} -DDEP_WX_GTK3=ON"
-    if [[ -n "${CLEAN_BUILD}" ]]
-    then
-        rm -fr deps/build
-    fi
-    mkdir -p deps/build
-    if [[ -n "${BUILD_DEBUG}" ]] ; then
-        # build deps with debug and release else cmake will not find required sources
-        mkdir -p deps/build/release
-	CMAKE_CMD="cmake ${CMAKE_C_CXX_COMPILER_CLANG} ${CMAKE_LLD_LINKER_ARGS} -S deps -B deps/build/release -DSLIC3R_PCH=${SLIC3R_PRECOMPILED_HEADERS} -G Ninja -DDESTDIR=${SCRIPT_PATH}/deps/build/destdir -DDEP_DOWNLOAD_DIR=${SCRIPT_PATH}/deps/DL_CACHE ${COLORED_OUTPUT} ${BUILD_ARGS}"
-	echo "${CMAKE_CMD}"
-	${CMAKE_CMD}
-        cmake --build deps/build/release
-        BUILD_ARGS="${BUILD_ARGS} -DCMAKE_BUILD_TYPE=Debug"
-    fi
-
-    # If this isn't in one quote, then empty variables can add two single quotes and mess up argument parsing for cmake.
-    CMAKE_CMD="cmake -S deps -B deps/build ${CMAKE_C_CXX_COMPILER_CLANG} ${CMAKE_LLD_LINKER_ARGS} -G Ninja ${COLORED_OUTPUT} ${BUILD_ARGS}"
-    echo "${CMAKE_CMD}"
-    ${CMAKE_CMD}
-    cmake --build deps/build
-fi
-
-if [[ -n "${BUILD_ORCA}" ]] ; then
-    echo "Configuring OrcaSlicer..."
-    if [[ -n "${CLEAN_BUILD}" ]] ; then
-        rm -fr build
-    fi
-    BUILD_ARGS="${ORCA_EXTRA_BUILD_ARGS}"
-    if [[ -n "${FOUND_GTK3_DEV}" ]] ; then
-        BUILD_ARGS="${BUILD_ARGS} -DSLIC3R_GTK=3"
-    fi
-    if [[ -n "${BUILD_DEBUG}" ]] ; then
-        BUILD_ARGS="${BUILD_ARGS} -DCMAKE_BUILD_TYPE=Debug -DBBL_INTERNAL_TESTING=1"
-    else
-        BUILD_ARGS="${BUILD_ARGS} -DBBL_RELEASE_TO_PUBLIC=1 -DBBL_INTERNAL_TESTING=0"
-    fi
-    if [[ -n "${BUILD_TESTS}" ]] ; then
-        BUILD_ARGS="${BUILD_ARGS} -DBUILD_TESTS=ON"
-    fi
-
-    echo "Configuring OrcaSlicer..."
-    cmake -S . -B build ${CMAKE_C_CXX_COMPILER_CLANG} ${CMAKE_LLD_LINKER_ARGS} -G "Ninja Multi-Config" \
--DSLIC3R_PCH=${SLIC3R_PRECOMPILED_HEADERS} \
--DCMAKE_PREFIX_PATH=${SCRIPT_PATH}/deps/build/destdir/usr/local \
--DSLIC3R_STATIC=1 \
--DORCA_TOOLS=ON \
-${COLORED_OUTPUT} \
-${BUILD_ARGS}
-    echo "${CMAKE_CMD}"
-    ${CMAKE_CMD}
-    echo "done"
-    echo "Building OrcaSlicer ..."
-    if [[ -n "${BUILD_DEBUG}" ]] ; then
-        cmake --build build --config Debug --target OrcaSlicer
-    else
-        cmake --build build --config Release --target OrcaSlicer
-    fi
-    echo "Building OrcaSlicer_profile_validator .."
-    if [[ -n "${BUILD_DEBUG}" ]] ; then
-        cmake --build build --config Debug --target OrcaSlicer_profile_validator
-    else
-        cmake --build build --config Release --target OrcaSlicer_profile_validator
-    fi
-    ./scripts/run_gettext.sh
-    echo "done"
-fi
-
-if [[ -n "${BUILD_IMAGE}" || -n "${BUILD_ORCA}" ]] ; then
-    pushd build > /dev/null
-    echo "[9/9] Generating Linux app..."
-    build_linux_image="./src/build_linux_image.sh"
-    if [[ -e ${build_linux_image} ]] ; then
-        extra_script_args=""
-        if [[ -n "${BUILD_IMAGE}" ]] ; then
-            extra_script_args="-i"
-        fi
-        ${build_linux_image} ${extra_script_args}
-
-        echo "done"
-    fi
-    popd > /dev/null # build
-fi
-
-popd > /dev/null # ${SCRIPT_PATH}

build_release.bat

@@ -1,50 +1,14 @@
 set WP=%CD%
-
-set debug=OFF
-set debuginfo=OFF
-if "%1"=="debug" set debug=ON
-if "%2"=="debug" set debug=ON
-if "%1"=="debuginfo" set debuginfo=ON
-if "%2"=="debuginfo" set debuginfo=ON
-if "%debug%"=="ON" (
-    set build_type=Debug
-    set build_dir=build-dbg
-) else (
-    if "%debuginfo%"=="ON" (
-        set build_type=RelWithDebInfo
-        set build_dir=build-dbginfo
-    ) else (
-        set build_type=Release
-        set build_dir=build
-    )
-)
-echo build type set to %build_type%
-
 cd deps
-mkdir %build_dir%
-cd %build_dir%
-set DEPS=%CD%/OrcaSlicer_dep
-if "%1"=="slicer" (
-    GOTO :slicer
-)
-echo "building deps.."
+mkdir build
+cd build
+set DEPS=%CD%/BambuStudio_dep
+cmake ../ -G "Visual Studio 16 2019" -DDESTDIR="%CD%/BambuStudio_dep" -DCMAKE_BUILD_TYPE=Release
+cmake --build . --config Release --target ALL_BUILD -- -m
 
-echo cmake ../ -G "Visual Studio 16 2019" -A x64 -DDESTDIR="%CD%/OrcaSlicer_dep" -DCMAKE_BUILD_TYPE=%build_type% -DDEP_DEBUG=%debug% -DORCA_INCLUDE_DEBUG_INFO=%debuginfo%
-cmake ../ -G "Visual Studio 16 2019" -A x64 -DDESTDIR="%CD%/OrcaSlicer_dep" -DCMAKE_BUILD_TYPE=%build_type% -DDEP_DEBUG=%debug% -DORCA_INCLUDE_DEBUG_INFO=%debuginfo%
-cmake --build . --config %build_type% --target deps -- -m
-
-if "%1"=="deps" exit /b 0
-
-:slicer
-echo "building Orca Slicer..."
 cd %WP%
-mkdir %build_dir%
-cd %build_dir%
-
-echo cmake .. -G "Visual Studio 16 2019" -A x64 -DBBL_RELEASE_TO_PUBLIC=1 -DCMAKE_PREFIX_PATH="%DEPS%/usr/local" -DCMAKE_INSTALL_PREFIX="./OrcaSlicer" -DCMAKE_BUILD_TYPE=%build_type%
-cmake .. -G "Visual Studio 16 2019" -A x64 -DBBL_RELEASE_TO_PUBLIC=1 -DCMAKE_PREFIX_PATH="%DEPS%/usr/local" -DCMAKE_INSTALL_PREFIX="./OrcaSlicer" -DCMAKE_BUILD_TYPE=%build_type% -DWIN10SDK_PATH="C:/Program Files (x86)/Windows Kits/10/Include/10.0.19041.0"
-cmake --build . --config %build_type% --target ALL_BUILD -- -m
-cd ..
-call scripts/run_gettext.bat
-cd %build_dir%
-cmake --build . --target install --config %build_type%
+mkdir build 
+cd build
+cmake .. -G "Visual Studio 16 2019" -DBBL_RELEASE_TO_PUBLIC=0 -DCMAKE_PREFIX_PATH="%DEPS%/usr/local" -DCMAKE_INSTALL_PREFIX="./BambuStudio-SoftFever" -DCMAKE_BUILD_TYPE=Release -DWIN10SDK_PATH="C:/Program Files (x86)/Windows Kits/10/Include/10.0.19041.0"
+cmake --build . --config Release --target ALL_BUILD -- -m
+cmake --build . --target install --config Release

build_release_macos.sh

@@ -1,304 +0,0 @@
-#!/bin/bash
-
-set -e
-set -o pipefail
-
-while getopts ":dpa:snt:xbc:h" opt; do
-  case "${opt}" in
-    d )
-        export BUILD_TARGET="deps"
-        ;;
-    p )
-        export PACK_DEPS="1"
-        ;;
-    a )
-        export ARCH="$OPTARG"
-        ;;
-    s )
-        export BUILD_TARGET="slicer"
-        ;;
-    n )
-        export NIGHTLY_BUILD="1"
-        ;;
-    t )
-        export OSX_DEPLOYMENT_TARGET="$OPTARG"
-        ;;
-    x )
-        export SLICER_CMAKE_GENERATOR="Ninja Multi-Config"
-        export SLICER_BUILD_TARGET="all"
-        export DEPS_CMAKE_GENERATOR="Ninja"
-        ;;
-    b )
-        export BUILD_ONLY="1"
-        ;;
-    c )
-        export BUILD_CONFIG="$OPTARG"
-        ;;
-    1 )
-        export CMAKE_BUILD_PARALLEL_LEVEL=1
-        ;;
-    h ) echo "Usage: ./build_release_macos.sh [-d]"
-        echo "   -d: Build deps only"
-        echo "   -a: Set ARCHITECTURE (arm64 or x86_64 or universal)"
-        echo "   -s: Build slicer only"
-        echo "   -n: Nightly build"
-        echo "   -t: Specify minimum version of the target platform, default is 11.3"
-        echo "   -x: Use Ninja Multi-Config CMake generator, default is Xcode"
-        echo "   -b: Build without reconfiguring CMake"
-        echo "   -c: Set CMake build configuration, default is Release"
-        echo "   -1: Use single job for building"
-        exit 0
-        ;;
-    * )
-        ;;
-  esac
-done
-
-# Set defaults
-
-if [ -z "$ARCH" ]; then
-    ARCH="$(uname -m)"
-    export ARCH
-fi
-
-if [ -z "$BUILD_CONFIG" ]; then
-  export BUILD_CONFIG="Release"
-fi
-
-if [ -z "$BUILD_TARGET" ]; then
-  export BUILD_TARGET="all"
-fi
-
-if [ -z "$SLICER_CMAKE_GENERATOR" ]; then
-  export SLICER_CMAKE_GENERATOR="Xcode"
-fi
-
-if [ -z "$SLICER_BUILD_TARGET" ]; then
-  export SLICER_BUILD_TARGET="ALL_BUILD"
-fi
-
-if [ -z "$DEPS_CMAKE_GENERATOR" ]; then
-  export DEPS_CMAKE_GENERATOR="Unix Makefiles"
-fi
-
-if [ -z "$OSX_DEPLOYMENT_TARGET" ]; then
-  export OSX_DEPLOYMENT_TARGET="11.3"
-fi
-
-echo "Build params:"
-echo " - ARCH: $ARCH"
-echo " - BUILD_CONFIG: $BUILD_CONFIG"
-echo " - BUILD_TARGET: $BUILD_TARGET"
-echo " - CMAKE_GENERATOR: $SLICER_CMAKE_GENERATOR for Slicer, $DEPS_CMAKE_GENERATOR for deps"
-echo " - OSX_DEPLOYMENT_TARGET: $OSX_DEPLOYMENT_TARGET"
-echo
-
-# if which -s brew; then
-# 	brew --prefix libiconv
-# 	brew --prefix zstd
-# 	export LIBRARY_PATH=$LIBRARY_PATH:$(brew --prefix zstd)/lib/
-# elif which -s port; then
-# 	port install libiconv
-# 	port install zstd
-# 	export LIBRARY_PATH=$LIBRARY_PATH:/opt/local/lib
-# else
-# 	echo "Need either brew or macports to successfully build deps"
-# 	exit 1
-# fi
-
-PROJECT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
-PROJECT_BUILD_DIR="$PROJECT_DIR/build/$ARCH"
-DEPS_DIR="$PROJECT_DIR/deps"
-DEPS_BUILD_DIR="$DEPS_DIR/build/$ARCH"
-DEPS="$DEPS_BUILD_DIR/OrcaSlicer_deps"
-
-# For Multi-config generators like Ninja and Xcode
-export BUILD_DIR_CONFIG_SUBDIR="/$BUILD_CONFIG"
-
-function build_deps() {
-    # iterate over two architectures: x86_64 and arm64
-    for _ARCH in x86_64 arm64; do
-        # if ARCH is universal or equal to _ARCH
-        if [ "$ARCH" == "universal" ] || [ "$ARCH" == "$_ARCH" ]; then
-
-            PROJECT_BUILD_DIR="$PROJECT_DIR/build/$_ARCH"
-            DEPS_BUILD_DIR="$DEPS_DIR/build/$_ARCH"
-            DEPS="$DEPS_BUILD_DIR/OrcaSlicer_dep"
-
-            echo "Building deps..."
-            (
-                set -x
-                mkdir -p "$DEPS"
-                cd "$DEPS_BUILD_DIR"
-                if [ "1." != "$BUILD_ONLY". ]; then
-                    cmake "${DEPS_DIR}" \
-                        -G "${DEPS_CMAKE_GENERATOR}" \
-                        -DDESTDIR="$DEPS" \
-                        -DOPENSSL_ARCH="darwin64-${_ARCH}-cc" \
-                        -DCMAKE_BUILD_TYPE="$BUILD_CONFIG" \
-                        -DCMAKE_OSX_ARCHITECTURES:STRING="${_ARCH}" \
-                        -DCMAKE_OSX_DEPLOYMENT_TARGET="${OSX_DEPLOYMENT_TARGET}"
-                fi
-                cmake --build . --config "$BUILD_CONFIG" --target deps
-            )
-        fi
-    done
-}
-
-function pack_deps() {
-    echo "Packing deps..."
-    (
-        set -x
-        cd "$DEPS_DIR"
-        tar -zcvf "OrcaSlicer_dep_mac_${ARCH}_$(date +"%Y%m%d").tar.gz" "build"
-    )
-}
-
-function build_slicer() {
-    # iterate over two architectures: x86_64 and arm64
-    for _ARCH in x86_64 arm64; do
-        # if ARCH is universal or equal to _ARCH
-        if [ "$ARCH" == "universal" ] || [ "$ARCH" == "$_ARCH" ]; then
-
-            PROJECT_BUILD_DIR="$PROJECT_DIR/build/$_ARCH"
-            DEPS_BUILD_DIR="$DEPS_DIR/build/$_ARCH"
-            DEPS="$DEPS_BUILD_DIR/OrcaSlicer_dep"
-
-            echo "Building slicer for $_ARCH..."
-            (
-                set -x
-            mkdir -p "$PROJECT_BUILD_DIR"
-            cd "$PROJECT_BUILD_DIR"
-            if [ "1." != "$BUILD_ONLY". ]; then
-                cmake "${PROJECT_DIR}" \
-                    -G "${SLICER_CMAKE_GENERATOR}" \
-                    -DBBL_RELEASE_TO_PUBLIC=1 \
-                    -DORCA_TOOLS=ON \
-                    -DCMAKE_PREFIX_PATH="$DEPS/usr/local" \
-                    -DCMAKE_INSTALL_PREFIX="$PWD/OrcaSlicer" \
-                    -DCMAKE_BUILD_TYPE="$BUILD_CONFIG" \
-                    -DCMAKE_MACOSX_RPATH=ON \
-                    -DCMAKE_INSTALL_RPATH="${DEPS}/usr/local" \
-                    -DCMAKE_MACOSX_BUNDLE=ON \
-                    -DCMAKE_OSX_ARCHITECTURES="${_ARCH}" \
-                    -DCMAKE_OSX_DEPLOYMENT_TARGET="${OSX_DEPLOYMENT_TARGET}"
-            fi
-            cmake --build . --config "$BUILD_CONFIG" --target "$SLICER_BUILD_TARGET"
-        )
-
-        echo "Verify localization with gettext..."
-        (
-            cd "$PROJECT_DIR"
-            ./scripts/run_gettext.sh
-        )
-
-        echo "Fix macOS app package..."
-        (
-            cd "$PROJECT_BUILD_DIR"
-            mkdir -p OrcaSlicer
-            cd OrcaSlicer
-            # remove previously built app
-            rm -rf ./OrcaSlicer.app
-            # fully copy newly built app
-            cp -pR "../src$BUILD_DIR_CONFIG_SUBDIR/OrcaSlicer.app" ./OrcaSlicer.app
-            # fix resources
-            resources_path=$(readlink ./OrcaSlicer.app/Contents/Resources)
-            rm ./OrcaSlicer.app/Contents/Resources
-            cp -R "$resources_path" ./OrcaSlicer.app/Contents/Resources
-            # delete .DS_Store file
-            find ./OrcaSlicer.app/ -name '.DS_Store' -delete
-            
-            # Copy OrcaSlicer_profile_validator.app if it exists
-            if [ -f "../src$BUILD_DIR_CONFIG_SUBDIR/OrcaSlicer_profile_validator.app/Contents/MacOS/OrcaSlicer_profile_validator" ]; then
-                echo "Copying OrcaSlicer_profile_validator.app..."
-                rm -rf ./OrcaSlicer_profile_validator.app
-                cp -pR "../src$BUILD_DIR_CONFIG_SUBDIR/OrcaSlicer_profile_validator.app" ./OrcaSlicer_profile_validator.app
-                # delete .DS_Store file
-                find ./OrcaSlicer_profile_validator.app/ -name '.DS_Store' -delete
-            fi
-        )
-
-        # extract version
-        # export ver=$(grep '^#define SoftFever_VERSION' ../src/libslic3r/libslic3r_version.h | cut -d ' ' -f3)
-        # ver="_V${ver//\"}"
-        # echo $PWD
-        # if [ "1." != "$NIGHTLY_BUILD". ];
-        # then
-        #     ver=${ver}_dev
-        # fi
-
-        # zip -FSr OrcaSlicer${ver}_Mac_${_ARCH}.zip OrcaSlicer.app
-
-    fi
-    done
-}
-
-function build_universal() {
-    echo "Building universal binary..."
-
-    PROJECT_BUILD_DIR="$PROJECT_DIR/build/$ARCH"
-    
-    # Create universal binary
-    echo "Creating universal binary..."
-    # PROJECT_BUILD_DIR="$PROJECT_DIR/build_Universal"
-    mkdir -p "$PROJECT_BUILD_DIR/OrcaSlicer"
-    UNIVERSAL_APP="$PROJECT_BUILD_DIR/OrcaSlicer/OrcaSlicer.app"
-    rm -rf "$UNIVERSAL_APP"
-    cp -R "$PROJECT_DIR/build/arm64/OrcaSlicer/OrcaSlicer.app" "$UNIVERSAL_APP"
-    
-    # Get the binary path inside the .app bundle
-    BINARY_PATH="Contents/MacOS/OrcaSlicer"
-    
-    # Create universal binary using lipo
-    lipo -create \
-        "$PROJECT_DIR/build/x86_64/OrcaSlicer/OrcaSlicer.app/$BINARY_PATH" \
-        "$PROJECT_DIR/build/arm64/OrcaSlicer/OrcaSlicer.app/$BINARY_PATH" \
-        -output "$UNIVERSAL_APP/$BINARY_PATH"
-        
-    echo "Universal binary created at $UNIVERSAL_APP"
-    
-    # Create universal binary for profile validator if it exists
-    if [ -f "$PROJECT_DIR/build/arm64/OrcaSlicer/OrcaSlicer_profile_validator.app/Contents/MacOS/OrcaSlicer_profile_validator" ] && \
-       [ -f "$PROJECT_DIR/build/x86_64/OrcaSlicer/OrcaSlicer_profile_validator.app/Contents/MacOS/OrcaSlicer_profile_validator" ]; then
-        echo "Creating universal binary for OrcaSlicer_profile_validator..."
-        UNIVERSAL_VALIDATOR_APP="$PROJECT_BUILD_DIR/OrcaSlicer/OrcaSlicer_profile_validator.app"
-        rm -rf "$UNIVERSAL_VALIDATOR_APP"
-        cp -R "$PROJECT_DIR/build/arm64/OrcaSlicer/OrcaSlicer_profile_validator.app" "$UNIVERSAL_VALIDATOR_APP"
-        
-        # Get the binary path inside the profile validator .app bundle
-        VALIDATOR_BINARY_PATH="Contents/MacOS/OrcaSlicer_profile_validator"
-        
-        # Create universal binary using lipo
-        lipo -create \
-            "$PROJECT_DIR/build/x86_64/OrcaSlicer/OrcaSlicer_profile_validator.app/$VALIDATOR_BINARY_PATH" \
-            "$PROJECT_DIR/build/arm64/OrcaSlicer/OrcaSlicer_profile_validator.app/$VALIDATOR_BINARY_PATH" \
-            -output "$UNIVERSAL_VALIDATOR_APP/$VALIDATOR_BINARY_PATH"
-            
-        echo "Universal binary for OrcaSlicer_profile_validator created at $UNIVERSAL_VALIDATOR_APP"
-    fi
-}
-
-case "${BUILD_TARGET}" in
-    all)
-        build_deps
-        build_slicer
-        ;;
-    deps)
-        build_deps
-        ;;
-    slicer)
-        build_slicer
-        ;;
-    *)
-        echo "Unknown target: $BUILD_TARGET. Available targets: deps, slicer, all."
-        exit 1
-        ;;
-esac
-
-if [ "$ARCH" = "universal" ] && [ "$BUILD_TARGET" != "deps" ]; then
-    build_universal
-fi
-
-if [ "1." == "$PACK_DEPS". ]; then
-    pack_deps
-fi

build_release_vs2022.bat

@@ -1,67 +0,0 @@
-@REM OrcaSlicer build script for Windows
-@echo off
-set WP=%CD%
-
-@REM Pack deps
-if "%1"=="pack" (
-    setlocal ENABLEDELAYEDEXPANSION 
-    cd %WP%/deps/build
-    for /f "tokens=2-4 delims=/ " %%a in ('date /t') do set build_date=%%c%%b%%a
-    echo packing deps: OrcaSlicer_dep_win64_!build_date!_vs2022.zip
-
-    %WP%/tools/7z.exe a OrcaSlicer_dep_win64_!build_date!_vs2022.zip OrcaSlicer_dep
-    exit /b 0
-)
-
-set debug=OFF
-set debuginfo=OFF
-if "%1"=="debug" set debug=ON
-if "%2"=="debug" set debug=ON
-if "%1"=="debuginfo" set debuginfo=ON
-if "%2"=="debuginfo" set debuginfo=ON
-if "%debug%"=="ON" (
-    set build_type=Debug
-    set build_dir=build-dbg
-) else (
-    if "%debuginfo%"=="ON" (
-        set build_type=RelWithDebInfo
-        set build_dir=build-dbginfo
-    ) else (
-        set build_type=Release
-        set build_dir=build
-    )
-)
-echo build type set to %build_type%
-
-setlocal DISABLEDELAYEDEXPANSION 
-cd deps
-mkdir %build_dir%
-cd %build_dir%
-set DEPS=%CD%/OrcaSlicer_dep
-
-if "%1"=="slicer" (
-    GOTO :slicer
-)
-echo "building deps.."
-
-echo on
-cmake ../ -G "Visual Studio 17 2022" -A x64 -DDESTDIR="%DEPS%" -DCMAKE_BUILD_TYPE=%build_type% -DDEP_DEBUG=%debug% -DORCA_INCLUDE_DEBUG_INFO=%debuginfo%
-cmake --build . --config %build_type% --target deps -- -m
-@echo off
-
-if "%1"=="deps" exit /b 0
-
-:slicer
-echo "building Orca Slicer..."
-cd %WP%
-mkdir %build_dir%
-cd %build_dir%
-
-echo on
-cmake .. -G "Visual Studio 17 2022" -A x64 -DBBL_RELEASE_TO_PUBLIC=1 -DORCA_TOOLS=ON -DCMAKE_PREFIX_PATH="%DEPS%/usr/local" -DCMAKE_INSTALL_PREFIX="./OrcaSlicer" -DCMAKE_BUILD_TYPE=%build_type% -DWIN10SDK_PATH="%WindowsSdkDir%Include\%WindowsSDKVersion%\"
-cmake --build . --config %build_type% --target ALL_BUILD -- -m
-@echo off
-cd ..
-call scripts/run_gettext.bat
-cd %build_dir%
-cmake --build . --target install --config %build_type%

build_win.bat

@@ -0,0 +1,495 @@
+@setlocal disableDelayedExpansion enableExtensions
+@IF "%PS_ECHO_ON%" NEQ "" (echo on) ELSE (echo off)
+@GOTO :MAIN
+:HELP
+@ECHO.
+@ECHO Performs initial build or rebuild of the app (build) and deps (build/deps).
+@ECHO Default options are determined from build directories and system state.
+@ECHO.
+@ECHO Usage: build_win [-ARCH ^<arch^>] [-CONFIG ^<config^>] [-VERSION ^<version^>]
+@ECHO                  [-PRODUCT ^<product^>] [-DESTDIR ^<directory^>]
+@ECHO                  [-STEPS ^<all^|all-dirty^|app^|app-dirty^|deps^|deps-dirty^>]
+@ECHO                  [-RUN ^<console^|custom^|none^|viewer^|window^>]
+@ECHO.
+@ECHO  -a -ARCH      Target processor architecture
+@ECHO                Default: %PS_ARCH_HOST%
+@ECHO  -c -CONFIG    MSVC project config
+@ECHO                Default: %PS_CONFIG_DEFAULT%
+@ECHO  -v -VERSION   Major version number of MSVC installation to use for build
+@ECHO                Default: %PS_VERSION_SUPPORTED%
+@ECHO  -p -PRODUCT   Product ID of MSVC installation to use for build
+@ECHO                Default: %PS_PRODUCT_DEFAULT%
+@ECHO  -s -STEPS     Performs only the specified build steps:
+@ECHO                  all - clean and build deps and app
+@ECHO                  all-dirty - build deps and app without cleaning
+@ECHO                  app - clean and build main applications
+@ECHO                  app-dirty - build main applications without cleaning
+@ECHO                  deps - clean and build deps
+@ECHO                  deps-dirty - build deps without cleaning
+@ECHO                Default: %PS_STEPS_DEFAULT%
+@ECHO  -r -RUN       Specifies what to perform at the run step:
+@ECHO                  console - run and wait on bambu-studio-console.exe
+@ECHO                  custom - run and wait on your custom build/%PS_CUSTOM_RUN_FILE%
+@ECHO                  ide - open project in Visual Studio if not open (no wait)
+@ECHO                  none - run step does nothing
+@ECHO                  viewer - run bambu-gcodeviewer.exe (no wait)
+@ECHO                  window - run bambu-studio.exe (no wait)
+@ECHO                Default: none
+@ECHO  -d -DESTDIR   Deps destination directory
+@ECHO                Warning: Changing destdir path will not delete the old destdir.
+@ECHO                Default: %PS_DESTDIR_DEFAULT_MSG%
+@ECHO.
+@ECHO  Examples:
+@ECHO.
+@ECHO  Initial build:           build_win -d "c:\src\BambuSlicer-deps"
+@ECHO  Build post deps change:  build_win -s all
+@ECHO  App dirty build:         build_win
+@ECHO  App dirty build ^& run:   build_win -r console
+@ECHO  All clean build ^& run:   build_win -s all -r console -d "deps\build\out_deps"
+@ECHO.
+GOTO :END
+
+:MAIN
+REM Script constants
+SET START_TIME=%TIME%
+SET PS_START_DIR=%CD%
+SET PS_SOLUTION_NAME=BambuStudio
+SET PS_CHOICE_TIMEOUT=30
+SET PS_CUSTOM_RUN_FILE=custom_run.bat
+SET PS_DEPS_PATH_FILE_NAME=.DEPS_PATH.txt
+SET PS_DEPS_PATH_FILE=%~dp0deps\build\%PS_DEPS_PATH_FILE_NAME%
+SET PS_CONFIG_LIST="Debug;MinSizeRel;Release;RelWithDebInfo"
+
+REM The officially supported toolchain version is 16 (Visual Studio 2019)
+REM TODO: Update versions after Boost gets rolled to 1.78 or later
+SET PS_VERSION_SUPPORTED=16
+SET PS_VERSION_EXCEEDED=17
+SET VSWHERE=%ProgramFiles(x86)%\Microsoft Visual Studio\Installer\vswhere.exe
+IF NOT EXIST "%VSWHERE%" SET VSWHERE=%ProgramFiles%\Microsoft Visual Studio\Installer\vswhere.exe
+FOR /F "tokens=4 USEBACKQ delims=." %%I IN (`"%VSWHERE%" -nologo -property productId`) DO SET PS_PRODUCT_DEFAULT=%%I
+IF "%PS_PRODUCT_DEFAULT%" EQU "" (
+    SET EXIT_STATUS=-1
+    @ECHO ERROR: No Visual Studio installation found. 1>&2
+    GOTO :HELP
+)
+REM Default to the latest supported version if multiple are available
+FOR /F "tokens=1 USEBACKQ delims=." %%I IN (
+    `^""%VSWHERE%" -version "[%PS_VERSION_SUPPORTED%,%PS_VERSION_EXCEEDED%)" -latest -nologo -property catalog_buildVersion^"`
+) DO SET PS_VERSION_SUPPORTED=%%I
+
+REM Probe build directories and system state for reasonable default arguments
+pushd %~dp0
+SET PS_CONFIG=RelWithDebInfo
+SET PS_ARCH=%PROCESSOR_ARCHITECTURE:amd64=x64%
+CALL :TOLOWER PS_ARCH
+SET PS_RUN=none
+SET PS_DESTDIR=
+SET PS_VERSION=
+SET PS_PRODUCT=%PS_PRODUCT_DEFAULT%
+CALL :RESOLVE_DESTDIR_CACHE
+
+REM Set up parameters used by help menu
+SET EXIT_STATUS=0
+SET PS_CONFIG_DEFAULT=%PS_CONFIG%
+SET PS_ARCH_HOST=%PS_ARCH%
+(echo " -help /help -h /h -? /? ")| findstr /I /C:" %~1 ">nul && GOTO :HELP
+
+REM Parse arguments
+SET EXIT_STATUS=1
+SET PS_CURRENT_STEP=arguments
+SET PARSER_STATE=
+SET PARSER_FAIL=
+FOR %%I in (%*) DO CALL :PARSE_OPTION "ARCH CONFIG DESTDIR STEPS RUN VERSION PRODUCT" PARSER_STATE "%%~I"
+IF "%PARSER_FAIL%" NEQ "" (
+    @ECHO ERROR: Invalid switch: %PARSER_FAIL% 1>&2
+    GOTO :HELP
+)ELSE IF "%PARSER_STATE%" NEQ "" (
+    @ECHO ERROR: Missing parameter for: %PARSER_STATE% 1>&2
+    GOTO :HELP
+)
+
+REM Validate arguments
+SET PS_ASK_TO_CONTINUE=
+CALL :TOLOWER PS_ARCH
+SET PS_ARCH=%PS_ARCH:amd64=x64%
+CALL :PARSE_OPTION_VALUE %PS_CONFIG_LIST:;= % PS_CONFIG
+IF "%PS_CONFIG%" EQU "" GOTO :HELP
+REM RESOLVE_DESTDIR_CACHE must go after PS_ARCH and PS_CONFIG, but before PS STEPS
+CALL :RESOLVE_DESTDIR_CACHE
+IF "%PS_STEPS%" EQU "" SET PS_STEPS=%PS_STEPS_DEFAULT%
+CALL :PARSE_OPTION_VALUE "all all-dirty deps-dirty deps app-dirty app app-cmake" PS_STEPS
+IF "%PS_STEPS%" EQU "" GOTO :HELP
+(echo %PS_STEPS%)| findstr /I /C:"dirty">nul && SET PS_STEPS_DIRTY=1 || SET PS_STEPS_DIRTY=
+IF "%PS_STEPS%" EQU "app-cmake" SET PS_STEPS_DIRTY=1
+IF "%PS_DESTDIR%" EQU "" SET PS_DESTDIR=%PS_DESTDIR_CACHED%
+IF "%PS_DESTDIR%" EQU "" (
+    @ECHO ERROR: Parameter required: -DESTDIR 1>&2
+    GOTO :HELP
+)
+CALL :CANONICALIZE_PATH PS_DESTDIR "%PS_START_DIR%"
+IF "%PS_DESTDIR%" NEQ "%PS_DESTDIR_CACHED%" (
+    (echo "all deps all-dirty deps-dirty")| findstr /I /C:"%PS_STEPS%">nul || (
+        IF EXIST "%PS_DESTDIR%" (
+            @ECHO WARNING: DESTDIR does not match cache: 1>&2
+            @ECHO WARNING:  new: %PS_DESTDIR% 1>&2
+            @ECHO WARNING:  old: %PS_DESTDIR_CACHED% 1>&2
+            SET PS_ASK_TO_CONTINUE=1
+        ) ELSE (
+            @ECHO ERROR: Invalid parameter: DESTDIR=%PS_DESTDIR% 1>&2
+            GOTO :HELP
+        )
+    )
+)
+SET PS_DESTDIR_DEFAULT_MSG=
+CALL :PARSE_OPTION_VALUE "console custom ide none viewer window" PS_RUN
+IF "%PS_RUN%" EQU "" GOTO :HELP
+IF "%PS_RUN%" NEQ "none" IF "%PS_STEPS:~0,4%" EQU "deps" (
+    @ECHO ERROR: RUN=%PS_RUN% specified with STEPS=%PS_STEPS%
+    @ECHO ERROR: RUN=none is the only valid option for STEPS "deps" or "deps-dirty"
+    GOTO :HELP
+)
+IF DEFINED PS_VERSION (
+    SET /A PS_VERSION_EXCEEDED=%PS_VERSION% + 1
+) ELSE SET PS_VERSION=%PS_VERSION_SUPPORTED%
+SET MSVC_FILTER=-products Microsoft.VisualStudio.Product.%PS_PRODUCT% -version "[%PS_VERSION%,%PS_VERSION_EXCEEDED%)"
+FOR /F "tokens=* USEBACKQ" %%I IN (`^""%VSWHERE%" %MSVC_FILTER% -nologo -property installationPath^"`) DO SET MSVC_DIR=%%I
+IF NOT EXIST "%MSVC_DIR%" (
+    @ECHO ERROR: Compatible Visual Studio installation not found. 1>&2
+    GOTO :HELP
+)
+REM Give the user a chance to cancel if we found something odd.
+IF "%PS_ASK_TO_CONTINUE%" EQU "" GOTO :BUILD_ENV
+@ECHO.
+@ECHO Unexpected parameters detected. Build paused for %PS_CHOICE_TIMEOUT% seconds.
+choice /T %PS_CHOICE_TIMEOUT% /C YN /D N /M "Continue"
+IF %ERRORLEVEL% NEQ 1 GOTO :HELP
+
+REM Set up MSVC environment
+:BUILD_ENV
+SET EXIT_STATUS=2
+SET PS_CURRENT_STEP=environment
+@ECHO **********************************************************************
+@ECHO ** Build Config: %PS_CONFIG%
+@ECHO ** Target Arch:  %PS_ARCH%
+@ECHO ** Build Steps:  %PS_STEPS%
+@ECHO ** Run App:      %PS_RUN%
+@ECHO ** Deps path:    %PS_DESTDIR%
+@ECHO ** Using Microsoft Visual Studio installation found at:
+@ECHO **  %MSVC_DIR%
+CALL "%MSVC_DIR%\Common7\Tools\vsdevcmd.bat" -arch=%PS_ARCH% -host_arch=%PS_ARCH_HOST% -app_platform=Desktop
+IF %ERRORLEVEL% NEQ 0 GOTO :END
+REM Need to reset the echo state after vsdevcmd.bat clobbers it.
+@IF "%PS_ECHO_ON%" NEQ "" (echo on) ELSE (echo off)
+IF "%PS_DRY_RUN_ONLY%" NEQ "" (
+    @ECHO Script terminated early because PS_DRY_RUN_ONLY is set. 1>&2
+    GOTO :END
+)
+IF /I "%PS_STEPS:~0,3%" EQU "app" GOTO :BUILD_APP
+
+REM Build deps
+:BUILD_DEPS
+SET EXIT_STATUS=3
+SET PS_CURRENT_STEP=deps
+IF "%PS_STEPS_DIRTY%" EQU "" (
+    CALL :MAKE_OR_CLEAN_DIRECTORY deps\build "%PS_DEPS_PATH_FILE_NAME%" .vs
+    CALL :MAKE_OR_CLEAN_DIRECTORY "%PS_DESTDIR%"
+)
+cd deps\build || GOTO :END
+cmake.exe .. -DDESTDIR="%PS_DESTDIR%"
+IF %ERRORLEVEL% NEQ 0 IF "%PS_STEPS_DIRTY%" NEQ "" (
+    (del CMakeCache.txt && cmake.exe .. -DDESTDIR="%PS_DESTDIR%") || GOTO :END
+) ELSE GOTO :END
+(echo %PS_DESTDIR%)> "%PS_DEPS_PATH_FILE%"
+msbuild /m ALL_BUILD.vcxproj /p:Configuration=%PS_CONFIG%  /v:quiet || GOTO :END
+cd ..\..
+IF /I "%PS_STEPS:~0,4%" EQU "deps" GOTO :RUN_APP
+
+REM Build app
+:BUILD_APP
+SET EXIT_STATUS=4
+SET PS_CURRENT_STEP=app
+IF "%PS_STEPS_DIRTY%" EQU "" CALL :MAKE_OR_CLEAN_DIRECTORY build "%PS_CUSTOM_RUN_FILE%" .vs
+cd build || GOTO :END
+REM Make sure we have a custom batch file skeleton for the run stage
+set PS_CUSTOM_BAT=%PS_CUSTOM_RUN_FILE%
+CALL :CANONICALIZE_PATH PS_CUSTOM_BAT
+IF NOT EXIST %PS_CUSTOM_BAT% CALL :WRITE_CUSTOM_SCRIPT_SKELETON %PS_CUSTOM_BAT%
+SET PS_PROJECT_IS_OPEN=
+FOR /F "tokens=2 delims=," %%I in (
+    'tasklist /V /FI "IMAGENAME eq devenv.exe " /NH /FO CSV ^| find "%PS_SOLUTION_NAME%"'
+) do SET PS_PROJECT_IS_OPEN=%%~I
+cmake.exe .. -DCMAKE_PREFIX_PATH="%PS_DESTDIR%\usr\local" -DCMAKE_CONFIGURATION_TYPES=%PS_CONFIG_LIST%
+IF %ERRORLEVEL% NEQ 0 IF "%PS_STEPS_DIRTY%" NEQ "" (
+    (del CMakeCache.txt && cmake.exe .. -DCMAKE_PREFIX_PATH="%PS_DESTDIR%\usr\local" -DCMAKE_CONFIGURATION_TYPES=%PS_CONFIG_LIST%) || GOTO :END
+) ELSE GOTO :END
+REM Skip the build step if we're using the undocumented app-cmake to regenerate the full config from inside devenv
+IF "%PS_STEPS%" NEQ "app-cmake" msbuild /m ALL_BUILD.vcxproj /p:Configuration=%PS_CONFIG% /v:quiet || GOTO :END
+(echo %PS_DESTDIR%)> "%PS_DEPS_PATH_FILE_FOR_CONFIG%"
+
+REM Run app
+:RUN_APP
+REM All build steps complete.
+CALL :DIFF_TIME ELAPSED_TIME %START_TIME% %TIME%
+IF "%PS_CURRENT_STEP%" NEQ "arguments" (
+    @ECHO.
+    @ECHO Total Build Time Elapsed %ELAPSED_TIME%
+)
+SET EXIT_STATUS=5
+SET PS_CURRENT_STEP=run
+IF "%PS_RUN%" EQU "none" GOTO :PROLOGUE
+cd src\%PS_CONFIG% || GOTO :END
+SET PS_PROJECT_IS_OPEN=
+FOR /F "tokens=2 delims=," %%I in (
+    'tasklist /V /FI "IMAGENAME eq devenv.exe " /NH /FO CSV ^| find "%PS_SOLUTION_NAME%"'
+) do SET PS_PROJECT_IS_OPEN=%%~I
+@ECHO.
+@ECHO Running %PS_RUN% application...
+@REM icacls below is just a hack for file-not-found error handling
+IF "%PS_RUN%" EQU "console" (
+    icacls bambu-studio-console.exe >nul || GOTO :END
+    start /wait /b bambu-studio-console.exe
+) ELSE IF "%PS_RUN%" EQU "window" (
+    icacls bambu-studio.exe >nul || GOTO :END
+    start bambu-studio.exe
+) ELSE IF "%PS_RUN%" EQU "viewer" (
+    icacls bambu-gcodeviewer.exe >nul || GOTO :END
+    start bambu-gcodeviewer.exe
+) ELSE IF "%PS_RUN%" EQU "custom" (
+    icacls %PS_CUSTOM_BAT% >nul || GOTO :END
+    CALL %PS_CUSTOM_BAT%
+) ELSE IF "%PS_RUN%" EQU "ide" (
+    IF "%PS_PROJECT_IS_OPEN%" NEQ "" (
+        @ECHO WARNING: Solution is already open in Visual Studio. Skipping ide run step. 1>&2
+    ) ELSE (
+        @ECHO Preparing to run Visual Studio...
+        cd ..\.. || GOTO :END
+        REM This hack generates a single config for MSVS, guaranteeing it gets set as the active config.
+        cmake.exe .. -DCMAKE_PREFIX_PATH="%PS_DESTDIR%\usr\local" -DCMAKE_CONFIGURATION_TYPES=%PS_CONFIG% > nul 2> nul || GOTO :END
+        REM Now launch devenv with the single config (setting it active) and a /command switch to re-run cmake and generate the full config list
+        start devenv.exe %PS_SOLUTION_NAME%.sln /command ^"shell /o ^^^"%~f0^^^" -d ^^^"%PS_DESTDIR%^^^" -c %PS_CONFIG% -a %PS_ARCH% -r none -s app-cmake^"
+        REM If devenv fails to launch just directly regenerate the full config list.
+        IF %ERRORLEVEL% NEQ 0 (
+            cmake.exe .. -DCMAKE_PREFIX_PATH="%PS_DESTDIR%\usr\local" -DCMAKE_CONFIGURATION_TYPES=%PS_CONFIG_LIST% 2> nul 1> nul || GOTO :END
+        )
+    )
+)
+
+@REM **********    DON'T ADD ANY CODE BETWEEN THESE TWO SECTIONS    **********
+@REM RUN_APP may hand off control, so let exit codes fall through to PROLOGUE.
+
+:PROLOGUE
+SET EXIT_STATUS=%ERRORLEVEL%
+:END
+@IF "%PS_ECHO_ON%%PS_DRY_RUN_ONLY%" NEQ "" (
+    @ECHO **********************************************************************
+    @ECHO ** Script Parameters:
+    @ECHO **********************************************************************
+    @SET PS_
+)
+IF "%EXIT_STATUS%" NEQ "0" (
+    IF "%PS_CURRENT_STEP%" NEQ "arguments" (
+        @ECHO.
+        @ECHO ERROR: *** Build process failed at %PS_CURRENT_STEP% step. *** 1>&2
+    )
+) ELSE (
+    @ECHO All steps completed successfully.
+)
+popd
+exit /B %EXIT_STATUS%
+
+GOTO :EOF
+REM Functions and stubs start here.
+
+:RESOLVE_DESTDIR_CACHE
+@REM Resolves all DESTDIR cache values and sets PS_STEPS_DEFAULT
+@REM Note: This just sets global variables, so it doesn't use setlocal.
+SET PS_DEPS_PATH_FILE_FOR_CONFIG=%~dp0build\.vs\%PS_ARCH%\%PS_CONFIG%\%PS_DEPS_PATH_FILE_NAME%
+mkdir "%~dp0build\.vs\%PS_ARCH%\%PS_CONFIG%" > nul 2> nul
+REM Copy a legacy file if we don't have one in the proper location.
+echo f|xcopy /D "%~dp0build\%PS_ARCH%\%PS_CONFIG%\%PS_DEPS_PATH_FILE_NAME%" "%PS_DEPS_PATH_FILE_FOR_CONFIG%" > nul 2> nul
+CALL :CANONICALIZE_PATH PS_DEPS_PATH_FILE_FOR_CONFIG
+IF EXIST "%PS_DEPS_PATH_FILE_FOR_CONFIG%" (
+    FOR /F "tokens=* USEBACKQ" %%I IN ("%PS_DEPS_PATH_FILE_FOR_CONFIG%") DO (
+        SET PS_DESTDIR_CACHED=%%I
+        SET PS_DESTDIR_DEFAULT_MSG=%%I
+    )
+    SET PS_STEPS_DEFAULT=app-dirty
+) ELSE IF EXIST "%PS_DEPS_PATH_FILE%" (
+    FOR /F "tokens=* USEBACKQ" %%I IN ("%PS_DEPS_PATH_FILE%") DO (
+        SET PS_DESTDIR_CACHED=%%I
+        SET PS_DESTDIR_DEFAULT_MSG=%%I
+    )
+    SET PS_STEPS_DEFAULT=app
+) ELSE (
+    SET PS_DESTDIR_CACHED=
+    SET PS_DESTDIR_DEFAULT_MSG=Cache missing. Argument required.
+    SET PS_STEPS_DEFAULT=all
+)
+GOTO :EOF
+
+:PARSE_OPTION
+@REM Argument parser called for each argument
+@REM %1 - Valid option list
+@REM %2 - Variable name for parser state; must be unset when parsing finished
+@REM %3 - Current argument value
+@REM PARSER_FAIL will be set on an error
+@REM Note: Must avoid delayed expansion since filenames may contain ! character
+setlocal disableDelayedExpansion
+IF "%PARSER_FAIL%" NEQ "" GOTO :EOF
+CALL SET LAST_ARG=%%%2%%
+IF "%LAST_ARG%" EQU "" (
+    CALL :PARSE_OPTION_NAME %1 %~2 %~3 1
+    SET ARG_TYPE=NAME
+) ELSE (
+    SET PS_SET_COMMAND=SET PS_%LAST_ARG%=%~3
+    SET ARG_TYPE=LAST_ARG
+    SET %~2=
+)
+CALL SET LAST_ARG=%%%2%%
+IF "%LAST_ARG%%ARG_TYPE%" EQU "NAME" SET PARSER_FAIL=%~3
+(
+    endlocal
+    SET PARSER_FAIL=%PARSER_FAIL%
+    SET %~2=%LAST_ARG%
+    %PS_SET_COMMAND%
+)
+GOTO :EOF
+
+:PARSE_OPTION_VALUE
+setlocal disableDelayedExpansion
+@REM Parses value and verifies it is within the supplied list
+@REM %1 - Valid option list
+@REM %2 - In/out variable name; unset on error
+CALL SET NAME=%~2
+CALL SET SAVED_VALUE=%%%NAME%%%
+CALL :PARSE_OPTION_NAME %1 %NAME% -%SAVED_VALUE%
+CALL SET NEW_VALUE=%%%NAME%%%
+IF "%NEW_VALUE%" EQU "" (
+    @ECHO ERROR: Invalid parameter: %NAME:~3%=%SAVED_VALUE% 1>&2
+)
+endlocal & SET %NAME%=%NEW_VALUE%
+GOTO :EOF
+
+:PARSE_OPTION_NAME
+@REM Parses an option name
+@REM %1 - Valid option list
+@REM %2 - Out variable name; unset on error
+@REM %3 - Current argument value
+@REM %4 - Boolean indicating single character switches are valid
+@REM Note: Delayed expansion safe because ! character is invalid in option name
+setlocal enableDelayedExpansion
+IF "%4" NEQ "" FOR %%I IN (%~1) DO @(
+    SET SHORT_NAME=%%~I
+    SET SHORT_ARG_!SHORT_NAME:~0,1!=%%~I
+)
+@SET OPTION_NAME=%~3
+@(echo %OPTION_NAME%)| findstr /R /C:"[-/]..*">nul || GOTO :PARSE_OPTION_NAME_FAIL
+@SET OPTION_NAME=%OPTION_NAME:~1%
+IF "%4" NEQ "" (
+    IF "%OPTION_NAME%" EQU "%OPTION_NAME:~0,1%" (
+        IF "!SHORT_ARG_%OPTION_NAME:~0,1%!" NEQ "" SET OPTION_NAME=!SHORT_ARG_%OPTION_NAME:~0,1%!
+    )
+)
+@(echo %OPTION_NAME%)| findstr /R /C:".[ ][ ]*.">nul && GOTO :PARSE_OPTION_NAME_FAIL
+@(echo  %~1 )| findstr /I /C:" %OPTION_NAME% ">nul || GOTO :PARSE_OPTION_NAME_FAIL
+FOR %%I IN (%~1) DO SET OPTION_NAME=!OPTION_NAME:%%~I=%%~I!
+endlocal & SET %~2=%OPTION_NAME%
+GOTO :EOF
+:PARSE_OPTION_NAME_FAIL
+endlocal & SET %~2=
+GOTO :EOF
+
+:MAKE_OR_CLEAN_DIRECTORY
+@REM Create directory if it doesn't exist or clean it if it does
+@REM %1 - Directory path to clean or create
+@REM %* - Optional list of files/dirs to keep (in the base directory only)
+setlocal disableDelayedExpansion
+IF NOT EXIST "%~1" (
+    @ECHO Creating %~1
+    mkdir "%~1" && (
+        endlocal
+        GOTO :EOF
+    )
+)
+@ECHO Cleaning %~1 ...
+SET KEEP_LIST=
+:MAKE_OR_CLEAN_DIRECTORY_ARG_LOOP
+IF "%~2" NEQ "" (
+    SET KEEP_LIST=%KEEP_LIST% "%~2"
+    SHIFT /2
+    GOTO :MAKE_OR_CLEAN_DIRECTORY_ARG_LOOP
+)
+for /F "usebackq delims=" %%I in (`dir /a /b "%~1"`) do (
+    (echo %KEEP_LIST%)| findstr /I /L /C:"\"%%I\"">nul || (
+        rmdir /s /q  "%~1\%%I" 2>nul ) || del /q /f "%~1\%%I"
+)
+endlocal
+GOTO :EOF
+
+:TOLOWER
+@REM Converts supplied environment variable to lowercase
+@REM %1 - Input/output variable name
+@REM Note: This is slow on very long strings, but is used only on very short ones
+setlocal disableDelayedExpansion
+@FOR %%b IN (a b c d e f g h i j k l m n o p q r s t u v w x y z) DO @CALL set %~1=%%%1:%%b=%%b%%
+@CALL SET OUTPUT=%%%~1%%
+endlocal & SET %~1=%OUTPUT%
+GOTO :EOF
+
+:CANONICALIZE_PATH
+@REM Canonicalizes the path in the supplied variable
+@REM %1 - Input/output variable containing path to canonicalize
+@REM %2 - Optional base directory
+setlocal
+CALL :CANONICALIZE_PATH_INNER %1 %%%~1%% %2
+endlocal & SET %~1=%OUTPUT%
+GOTO :EOF
+:CANONICALIZE_PATH_INNER
+if "%~3" NEQ "" (pushd %3 || GOTO :EOF)
+SET OUTPUT=%~f2
+if "%~3" NEQ "" popd
+GOTO :EOF
+
+:DIFF_TIME
+@REM Calculates elapsed time between two timestamps (TIME environment variable format)
+@REM %1 - Output variable
+@REM %2 - Start time
+@REM %3 - End time
+setlocal EnableDelayedExpansion
+set START_ARG=%2
+set END_ARG=%3
+set END=!END_ARG:%TIME:~8,1%=%%100)*100+1!
+set START=!START_ARG:%TIME:~8,1%=%%100)*100+1!
+set /A DIFF=((((10!END:%TIME:~2,1%=%%100)*60+1!%%100)-((((10!START:%TIME:~2,1%=%%100)*60+1!%%100), DIFF-=(DIFF^>^>31)*24*60*60*100
+set /A CC=DIFF%%100+100,DIFF/=100,SS=DIFF%%60+100,DIFF/=60,MM=DIFF%%60+100,HH=DIFF/60+100
+@endlocal & set %1=%HH:~1%%TIME:~2,1%%MM:~1%%TIME:~2,1%%SS:~1%%TIME:~8,1%%CC:~1%
+@GOTO :EOF
+
+:WRITE_CUSTOM_SCRIPT_SKELETON
+@REM Writes the following text to the supplied file
+@REM %1 - Output filename
+setlocal
+@(
+ECHO @ECHO.
+ECHO @ECHO ********************************************************************************
+ECHO @ECHO ** This is a custom run script skeleton.
+ECHO @ECHO ********************************************************************************
+ECHO @ECHO.
+ECHO @ECHO ********************************************************************************
+ECHO @ECHO ** The working directory is:
+ECHO @ECHO ********************************************************************************
+ECHO dir
+ECHO @ECHO.
+ECHO @ECHO ********************************************************************************
+ECHO @ECHO ** The environment is:
+ECHO @ECHO ********************************************************************************
+ECHO set
+ECHO @ECHO.
+ECHO @ECHO ********************************************************************************
+ECHO @ECHO ** Edit or replace this script to run custom steps after a successful build:
+ECHO @ECHO ** %~1
+ECHO @ECHO ********************************************************************************
+ECHO @ECHO.
+) > "%~1"
+endlocal
+GOTO :EOF

cmake/modules/FindGLEW.cmake

@@ -64,6 +64,16 @@ This module defines the following variables:
 
 include(FindPackageHandleStandardArgs)
 
+find_package(GLEW CONFIG QUIET)
+
+if(GLEW_FOUND)
+  find_package_handle_standard_args(GLEW DEFAULT_MSG GLEW_CONFIG)
+  return()
+endif()
+
+if(GLEW_VERBOSE)
+  message(STATUS "FindGLEW: did not find GLEW CMake config file. Searching for libraries.")
+endif()
 
 if(APPLE)
   find_package(OpenGL QUIET)
@@ -84,20 +94,19 @@ endif()
 
 function(__glew_set_find_library_suffix shared_or_static)
   if((UNIX AND NOT APPLE) AND "${shared_or_static}" MATCHES "SHARED")
-    set(CMAKE_FIND_LIBRARY_SUFFIXES ".so")
+    set(CMAKE_FIND_LIBRARY_SUFFIXES ".so" PARENT_SCOPE)
   elseif((UNIX AND NOT APPLE) AND "${shared_or_static}" MATCHES "STATIC")
-    set(CMAKE_FIND_LIBRARY_SUFFIXES ".a")
+    set(CMAKE_FIND_LIBRARY_SUFFIXES ".a" PARENT_SCOPE)
   elseif(APPLE AND "${shared_or_static}" MATCHES "SHARED")
-    set(CMAKE_FIND_LIBRARY_SUFFIXES ".dylib;.so")
+    set(CMAKE_FIND_LIBRARY_SUFFIXES ".dylib;.so" PARENT_SCOPE)
   elseif(APPLE AND "${shared_or_static}" MATCHES "STATIC")
-    set(CMAKE_FIND_LIBRARY_SUFFIXES ".a")
+    set(CMAKE_FIND_LIBRARY_SUFFIXES ".a" PARENT_SCOPE)
   elseif(WIN32 AND "${shared_or_static}" MATCHES "SHARED")
-    set(CMAKE_FIND_LIBRARY_SUFFIXES ".lib")
+    set(CMAKE_FIND_LIBRARY_SUFFIXES ".lib" PARENT_SCOPE)
   elseif(WIN32 AND "${shared_or_static}" MATCHES "STATIC")
-    set(CMAKE_FIND_LIBRARY_SUFFIXES ".lib;.a;.dll.a")
+    set(CMAKE_FIND_LIBRARY_SUFFIXES ".lib;.a;.dll.a" PARENT_SCOPE)
   endif()
 
-  set(CMAKE_FIND_LIBRARY_SUFFIXES "${CMAKE_FIND_LIBRARY_SUFFIXES}" PARENT_SCOPE)
   if(GLEW_VERBOSE)
     message(STATUS "FindGLEW: CMAKE_FIND_LIBRARY_SUFFIXES for ${shared_or_static}: ${CMAKE_FIND_LIBRARY_SUFFIXES}")
   endif()

cmake/modules/FindGTK3.cmake

@@ -42,10 +42,5 @@ set(VERSION_OK FALSE)
 endif ()
 endif ()
 endif ()
-# Check for GDK Wayland support
-include(CheckSymbolExists)
-set(CMAKE_REQUIRED_INCLUDES ${GTK3_INCLUDE_DIRS})
-check_symbol_exists(GDK_WINDOWING_WAYLAND "gdk/gdk.h" wxHAVE_GDK_WAYLAND)
-check_symbol_exists(GDK_WINDOWING_X11 "gdk/gdk.h" wxHAVE_GDK_X11)
 include(FindPackageHandleStandardArgs)
 FIND_PACKAGE_HANDLE_STANDARD_ARGS(GTK3 DEFAULT_MSG GTK3_INCLUDE_DIRS GTK3_LIBRARIES VERSION_OK)

cmake/modules/FindOpenVDB.cmake

@@ -123,7 +123,7 @@ if (OPENVDB_FIND_MODULE_PATH)
 endif ()
 # ###########################################################################
 
-cmake_minimum_required(VERSION 3.13)
+cmake_minimum_required(VERSION 3.3)
 # Monitoring <PackageName>_ROOT variables
 if(POLICY CMP0074)
   cmake_policy(SET CMP0074 NEW)
@@ -238,8 +238,7 @@ endif()
 set(OpenVDB_LIB_COMPONENTS "")
 set(OpenVDB_DEBUG_SUFFIX "d" CACHE STRING "Suffix for the debug libraries")
 
-# get_property(_is_multi GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)
-set(_is_multi FALSE)
+get_property(_is_multi GLOBAL PROPERTY GENERATOR_IS_MULTI_CONFIG)
 
 foreach(COMPONENT ${OpenVDB_FIND_COMPONENTS})
   set(LIB_NAME ${COMPONENT})

cmake/modules/FindTBB.cmake

@@ -1,19 +1,29 @@
-# ported from PrusaSlicer
+# This is a wrapper of FindTBB which prefers the config scripts if available in the system
+# but only if building with dynamic dependencies. The config scripts potentially belong
+# to TBB >= 2020 which is incompatible with OpenVDB in our static dependency bundle.
+# This workaround is useful for package maintainers on Linux systems to use newer versions
+# of intel TBB (renamed to oneTBB from version 2021 up).
 set(_q "")
 if(${CMAKE_FIND_PACKAGE_NAME}_FIND_QUIETLY)
     set(_q QUIET)
 endif()
 
+# Only consider the config scripts if not building with the static dependencies
+# and this call is not made from a static dependency build (e.g. dep_OpenVDB will use this module)
+# BUILD_SHARED_LIBS will always be defined for dependency projects and will be OFF.
+# Newer versions of TBB also discourage from using TBB as a static library
+if (NOT SLIC3R_STATIC AND (NOT DEFINED BUILD_SHARED_LIBS OR BUILD_SHARED_LIBS)) 
+    find_package(${CMAKE_FIND_PACKAGE_NAME} ${${CMAKE_FIND_PACKAGE_NAME}_FIND_VERSION} CONFIG ${_q})
 
-find_package(${CMAKE_FIND_PACKAGE_NAME} ${${CMAKE_FIND_PACKAGE_NAME}_FIND_VERSION} CONFIG ${_q})
-
-if(NOT ${CMAKE_FIND_PACKAGE_NAME}_FIND_QUIETLY)
-    if (NOT ${CMAKE_FIND_PACKAGE_NAME}_FOUND)
-        message(STATUS "Falling back to MODULE search for ${CMAKE_FIND_PACKAGE_NAME}...")
-    else()
-        message(STATUS "${CMAKE_FIND_PACKAGE_NAME} found in ${${CMAKE_FIND_PACKAGE_NAME}_DIR}")
+    if(NOT ${CMAKE_FIND_PACKAGE_NAME}_FIND_QUIETLY)
+        if (NOT ${CMAKE_FIND_PACKAGE_NAME}_FOUND)
+            message(STATUS "Falling back to MODULE search for ${CMAKE_FIND_PACKAGE_NAME}...")
+        else()
+            message(STATUS "${CMAKE_FIND_PACKAGE_NAME} found in ${${CMAKE_FIND_PACKAGE_NAME}_DIR}")
+        endif()
     endif()
-endif()
+
+endif ()
 
 if (NOT ${CMAKE_FIND_PACKAGE_NAME}_FOUND)
     include(${CMAKE_CURRENT_LIST_DIR}/FindTBB.cmake.in)

cmake/modules/FindTBB.cmake.in

@@ -293,7 +293,7 @@ if(NOT TBB_FOUND)
   # Create targets
   ##################################
 
-  if(NOT CMAKE_VERSION VERSION_LESS 3.0 AND TBB_FOUND AND NOT TARGET TBB::tbb)
+  if(NOT CMAKE_VERSION VERSION_LESS 3.0 AND TBB_FOUND)
     add_library(TBB::tbb UNKNOWN IMPORTED)
     set_target_properties(TBB::tbb PROPERTIES
           INTERFACE_COMPILE_DEFINITIONS "${TBB_DEFINITIONS}"

cmake/modules/Findlibnoise.cmake

@@ -1,15 +0,0 @@
-find_path(LIBNOISE_INCLUDE_DIR libnoise/noise.h)
-find_library(LIBNOISE_LIBRARY NAMES libnoise libnoise_static liblibnoise_static)
-include(FindPackageHandleStandardArgs)
-find_package_handle_standard_args(libnoise DEFAULT_MSG
-    LIBNOISE_LIBRARY
-    LIBNOISE_INCLUDE_DIR
-)
-
-if(libnoise_FOUND)
-    add_library(noise::noise STATIC IMPORTED)
-    set_target_properties(noise::noise PROPERTIES
-        IMPORTED_LOCATION "${LIBNOISE_LIBRARY}"
-        INTERFACE_INCLUDE_DIRECTORIES "${LIBNOISE_INCLUDE_DIR}"
-    )
-endif()

cmake/modules/MacOSXBundleInfo.plist.in

@@ -11,7 +11,7 @@
 	<key>CFBundleIconFile</key>
 	<string>${MACOSX_BUNDLE_ICON_FILE}</string>
 	<key>CFBundleIdentifier</key>
-	<string>com.softfever3d.orca-slicer</string>
+	<string>${MACOSX_BUNDLE_GUI_IDENTIFIER}</string>
 	<key>CFBundleInfoDictionaryVersion</key>
 	<string>6.0</string>
 	<key>CFBundleLongVersionString</key>
@@ -26,118 +26,11 @@
 	<string>????</string>
 	<key>CFBundleVersion</key>
 	<string>${MACOSX_BUNDLE_BUNDLE_VERSION}</string>
-	<key>ATSApplicationFontsPath</key>
-  	<string>fonts/</string>
-  <key>CFBundleURLTypes</key>
-    <array>
-      <dict>
-        <key>CFBundleURLName</key>
-        <string>OrcaSlicer Downloads</string>
-        <key>CFBundleURLSchemes</key>
-        <array>
-          <string>orcaslicer</string>
-        </array>
-      </dict>
-    </array>
-	<key>CFBundleDocumentTypes</key>
-	<array>
-		<dict>
-			<key>CFBundleTypeExtensions</key>
-			<array>
-			<string>stl</string>
-			<string>STL</string>
-			</array>
-			<key>CFBundleTypeIconFile</key>
-			<string>images/stl.icns</string>
-			<key>CFBundleTypeName</key>
-			<string>STL</string>
-			<key>CFBundleTypeRole</key>
-			<string>Viewer</string>
-			<key>LISsAppleDefaultForType</key>
-			<true/>
-			<key>LSHandlerRank</key>
-			<string>Alternate</string>
-		</dict>
-		<dict>
-			<key>CFBundleTypeExtensions</key>
-			<array>
-			<string>obj</string>
-			<string>OBJ</string>
-			</array>
-			<key>CFBundleTypeIconFile</key>
-			<string>images/OrcaSlicer.icns</string>
-			<key>CFBundleTypeName</key>
-			<string>STL</string>
-			<key>CFBundleTypeRole</key>
-			<string>Viewer</string>
-			<key>LISsAppleDefaultForType</key>
-			<true/>
-			<key>LSHandlerRank</key>
-			<string>Alternate</string>
-		</dict>
-		<dict>
-			<key>CFBundleTypeExtensions</key>
-			<array>
-			<string>amf</string>
-			<string>AMF</string>
-			</array>
-			<key>CFBundleTypeIconFile</key>
-			<string>images/OrcaSlicer.icns</string>
-			<key>CFBundleTypeName</key>
-			<string>AMF</string>
-			<key>CFBundleTypeRole</key>
-			<string>Viewer</string>
-			<key>LISsAppleDefaultForType</key>
-			<true/>
-			<key>LSHandlerRank</key>
-			<string>Alternate</string>
-		</dict>
-		<dict>
-			<key>CFBundleTypeExtensions</key>
-			<array>
-			<string>3mf</string>
-			<string>3MF</string>
-			</array>
-			<key>CFBundleTypeIconFile</key>
-			<string>images/OrcaSlicer.icns</string>
-			<key>CFBundleTypeName</key>
-			<string>3MF</string>
-			<key>CFBundleTypeRole</key>
-			<string>Viewer</string>
-			<key>LISsAppleDefaultForType</key>
-			<true/>
-			<key>LSHandlerRank</key>
-			<string>Alternate</string>
-		</dict>
-		<dict>
-			<key>CFBundleTypeExtensions</key>
-			<array>
-			<string>gcode</string>
-			<string>GCODE</string>
-			</array>
-			<key>CFBundleTypeIconFile</key>
-			<string>images/gcode.icns</string>
-			<key>CFBundleTypeName</key>
-			<string>GCODE</string>
-			<key>CFBundleTypeRole</key>
-			<string>Viewer</string>
-			<key>LISsAppleDefaultForType</key>
-			<true/>
-			<key>LSHandlerRank</key>
-			<string>Alternate</string>
-		</dict>
-	</array>
 	<key>CSResourcesFileMapped</key>
 	<true/>
+	<key>NSRequiresAquaSystemAppearance</key>
+	<true/>
 	<key>NSHumanReadableCopyright</key>
 	<string>${MACOSX_BUNDLE_COPYRIGHT}</string>
-	<key>NSAppTransportSecurity</key>  
-	<dict>
-		<!-- Disable App Transport Security. Resolves https://github.com/SoftFever/OrcaSlicer/issues/791 -->
-		<key>NSAllowsArbitraryLoads</key>
-		<true/>  
-		<key>NSAllowsArbitraryLoadsInWebContent</key>
-		<true/>
-	</dict>
 </dict>
 </plist>

deps/Blosc/Blosc.cmake

@@ -6,43 +6,23 @@ else()
     set(_build_static ON)
 endif()
 
-if(IS_CROSS_COMPILE AND APPLE)
-    orcaslicer_add_cmake_project(Blosc
-        #URL https://github.com/Blosc/c-blosc/archive/refs/tags/v1.17.0.zip
-        #URL_HASH SHA256=7463a1df566704f212263312717ab2c36b45d45cba6cd0dccebf91b2cc4b4da9
-        URL https://github.com/tamasmeszaros/c-blosc/archive/refs/heads/v1.17.0_tm.zip
-        URL_HASH SHA256=dcb48bf43a672fa3de6a4b1de2c4c238709dad5893d1e097b8374ad84b1fc3b3
-        DEPENDS ${ZLIB_PKG}
-        # Patching upstream does not work this way with git version 2.28 installed on mac worker
-        # PATCH_COMMAND  ${GIT_EXECUTABLE} apply --ignore-space-change --whitespace=fix ${CMAKE_CURRENT_LIST_DIR}/blosc-mods.patch
-        CMAKE_ARGS
-            -DCMAKE_POSITION_INDEPENDENT_CODE=ON
-            -DBUILD_SHARED=${_build_shared} 
-            -DBUILD_STATIC=${_build_static}
-            -DBUILD_TESTS=OFF 
-            -DBUILD_BENCHMARKS=OFF 
-            -DPREFER_EXTERNAL_ZLIB=ON
-            -DDEACTIVATE_SSE2=ON
-            -DDEACTIVATE_AVX2=ON
-    )
-else()
-    orcaslicer_add_cmake_project(Blosc
-        #URL https://github.com/Blosc/c-blosc/archive/refs/tags/v1.17.0.zip
-        #URL_HASH SHA256=7463a1df566704f212263312717ab2c36b45d45cba6cd0dccebf91b2cc4b4da9
-        URL https://github.com/tamasmeszaros/c-blosc/archive/refs/heads/v1.17.0_tm.zip
-        URL_HASH SHA256=dcb48bf43a672fa3de6a4b1de2c4c238709dad5893d1e097b8374ad84b1fc3b3
-        DEPENDS ${ZLIB_PKG}
-        # Patching upstream does not work this way with git version 2.28 installed on mac worker
-        # PATCH_COMMAND  ${GIT_EXECUTABLE} apply --ignore-space-change --whitespace=fix ${CMAKE_CURRENT_LIST_DIR}/blosc-mods.patch
-        CMAKE_ARGS
-            -DCMAKE_POSITION_INDEPENDENT_CODE=ON
-            -DBUILD_SHARED=${_build_shared} 
-            -DBUILD_STATIC=${_build_static}
-            -DBUILD_TESTS=OFF 
-            -DBUILD_BENCHMARKS=OFF 
-            -DPREFER_EXTERNAL_ZLIB=ON
-    )
-endif()
+bambustudio_add_cmake_project(Blosc
+    #URL https://github.com/Blosc/c-blosc/archive/refs/tags/v1.17.0.zip
+    #URL_HASH SHA256=7463a1df566704f212263312717ab2c36b45d45cba6cd0dccebf91b2cc4b4da9
+    URL https://github.com/tamasmeszaros/c-blosc/archive/refs/heads/v1.17.0_tm.zip
+    URL_HASH SHA256=dcb48bf43a672fa3de6a4b1de2c4c238709dad5893d1e097b8374ad84b1fc3b3
+    DEPENDS ${ZLIB_PKG}
+    # Patching upstream does not work this way with git version 2.28 installed on mac worker
+    # PATCH_COMMAND  ${GIT_EXECUTABLE} apply --ignore-space-change --whitespace=fix ${CMAKE_CURRENT_LIST_DIR}/blosc-mods.patch
+    CMAKE_ARGS
+        -DCMAKE_POSITION_INDEPENDENT_CODE=ON
+        -DBUILD_SHARED=${_build_shared} 
+        -DBUILD_STATIC=${_build_static}
+        -DBUILD_TESTS=OFF 
+        -DBUILD_BENCHMARKS=OFF 
+        -DPREFER_EXTERNAL_ZLIB=ON
+)
+
 if (MSVC)
     add_debug_dep(dep_Blosc)
 endif ()