Fixed an issue that if Orca was invoke by associated files, local data_dir was not used (#7049)

# Description

fixed #6987
# Screenshots/Recordings/Graphs

<!--
> Please attach relevant screenshots to showcase the UI changes.
> Please attach images that can help explain the changes.
-->

## Tests

<!--
> Please describe the tests that you have conducted to verify the
changes made in this PR.
-->

.github/workflows/check_profiles.yml

@@ -18,7 +18,7 @@ on:
 jobs:
   check_translation:
     name: Check profiles
-    runs-on: ubuntu-22.04
+    runs-on: ubuntu-24.04
     steps:  
       - name: Checkout repository
         uses: actions/checkout@v4

cmake/modules/MacOSXBundleInfo.plist.in

@@ -37,6 +37,14 @@
         <array>
           <string>orcaslicer</string>
         </array>
+      </dict>
+		<dict>
+        <key>CFBundleURLName</key>
+        <string>BambuStudio Downloads</string>
+        <key>CFBundleURLSchemes</key>
+        <array>
+          <string>bambustudioopen</string>
+        </array>
       </dict>
     </array>
 	<key>CFBundleDocumentTypes</key>

localization/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -5516,6 +5516,9 @@ msgstr ""
 msgid "Edit current plate name"
 msgstr ""
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr ""
 
@@ -7247,6 +7250,14 @@ msgid ""
 "does not support to print on the Cool Plate"
 msgstr ""
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr ""
 
@@ -8904,6 +8915,11 @@ msgstr ""
 msgid "°C"
 msgstr ""
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -8930,6 +8946,11 @@ msgid ""
 "support to print on the Cool Plate"
 msgstr ""
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -8948,12 +8969,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr ""
 
-msgid "Cool Plate"
+msgid "Smooth Cool Plate"
 msgstr ""
 
 msgid "Engineering Plate"
 msgstr ""
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr ""
 
@@ -9799,7 +9826,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
-#, possible-c-format, possible-boost-format
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -9824,6 +9851,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "

localization/i18n/ca/OrcaSlicer_ca.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: 2024-07-07 18:43+0200\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -5927,6 +5927,9 @@ msgstr "Bloquejar la placa actual"
 msgid "Edit current plate name"
 msgstr "Editar el nom de la placa actual"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Personalitzar la placa actual"
 
@@ -7903,6 +7906,14 @@ msgstr ""
 "Temperatura del llit quan s'instal·la la Base Freda. El valor 0 significa "
 "que el filament no admet imprimir a la Base Freda"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Base d'enginyeria"
 
@@ -9793,6 +9804,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9827,6 +9843,11 @@ msgstr ""
 "Temperatura del llit en la capa inicial. El valor 0 significa que el "
 "filament no admet imprimir a la Base Freda"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9851,12 +9872,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Tipus de llit suportats per la impressora"
 
-msgid "Cool Plate"
-msgstr "Base Freda"
+msgid "Smooth Cool Plate"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Base d'Enginyeria"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Seqüència d'impressió de primera capa"
 
@@ -10892,7 +10919,7 @@ msgstr "Avanç de Pressió Lineal( Klipper ) AKA Factor d'Avanç Lineal( Marlin
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
-#, c-format, boost-format
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10917,6 +10944,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -17294,6 +17322,9 @@ msgstr ""
 "augmentar adequadament la temperatura del llit pot reduir la probabilitat de "
 "deformació."
 
+#~ msgid "Cool Plate"
+#~ msgstr "Base Freda"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Invertir en capes senars"
 

localization/i18n/cs/OrcaSlicer_cs.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: 2023-09-30 15:15+0200\n"
 "Last-Translator: René Mošner <Renemosner@seznam.cz>\n"
 "Language-Team: \n"
@@ -5801,6 +5801,9 @@ msgstr "Zamknout aktuální podložku"
 msgid "Edit current plate name"
 msgstr ""
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Přizpůsobit aktuální podložku"
 
@@ -7687,6 +7690,14 @@ msgstr ""
 "Toto je teplota podložky, když je Cool podložka. Hodnota 0 znamená, že "
 "filament nepodporuje tisk na Cool Podložku"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Engineering podložka"
 
@@ -9482,6 +9493,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9516,6 +9532,11 @@ msgstr ""
 "Toto je teplota podložky první vrstvy. Hodnota 0 znamená filament "
 "nepodporuje tisk na Cool Podložku"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9540,12 +9561,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Typy podložek podporované tiskárnou"
 
-msgid "Cool Plate"
-msgstr "Cool Podložka"
+msgid "Smooth Cool Plate"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Engineering Podložka"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Sekvence tisku první vrstvy"
 
@@ -10478,7 +10505,7 @@ msgstr "Předstih tlaku (Klipper) AKA Lineární faktor předstihu (Marlin)"
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
-#, c-format, boost-format
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10503,6 +10530,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -16273,6 +16301,9 @@ msgid ""
 "probability of warping."
 msgstr ""
 
+#~ msgid "Cool Plate"
+#~ msgstr "Cool Podložka"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Obrátit na lichých"
 

localization/i18n/de/OrcaSlicer_de.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -4847,10 +4847,10 @@ msgid "Clone copies of selections"
 msgstr "Ausgewählte Kopien duplizieren"
 
 msgid "Duplicate Current Plate"
-msgstr ""
+msgstr "Aktuelle Druckplatte duplizieren"
 
 msgid "Duplicate the current plate"
-msgstr ""
+msgstr "Dupliziert die aktuelle Druckplatte"
 
 msgid "Select all"
 msgstr "Alles auswählen"
@@ -5980,6 +5980,9 @@ msgstr "Speere aktuelle Platte"
 msgid "Edit current plate name"
 msgstr "Bearbeite den Namen der aktuellen Platte"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Aktuelle Platte anpassen"
 
@@ -7974,6 +7977,17 @@ msgstr ""
 "Wert von 0 bedeutet, dass das Filament auf der kalten Druckplatte nicht "
 "unterstützt."
 
+msgid "Textured Cool plate"
+msgstr "Texturierte kalte Druckplatte"
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+"Dies ist die Betttemperatur, wenn die kalte Druckplatte installiert ist. Ein "
+"Wert von 0 bedeutet, dass das Filament auf der texturierten kalten "
+"Druckplatte nicht unterstützt wird."
+
 msgid "Engineering plate"
 msgstr "Technische Druckplatte"
 
@@ -9893,6 +9907,14 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+"Dies ist die Betttemperatur für Schichten mit Ausnahme der Ersten. Ein Wert "
+"von 0 bedeutet, dass das Filament auf der strukturierten kalten Druckplatte "
+"nicht unterstützt wird."
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9929,6 +9951,14 @@ msgstr ""
 "Dies ist die Betttemperatur der ersten Schicht. Ein Wert von 0 bedeutet, "
 "dass das Filament auf der kalten Druckplatte nicht unterstützt wird."
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+"Dies ist die Betttemperatur der ersten Schicht. Ein Wert von 0 bedeutet, "
+"dass das Filament auf der strukturierten kalten Druckplatte nicht "
+"unterstützt wird."
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9953,12 +9983,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Vom Drucker unterstützte Druckbettypen"
 
-msgid "Cool Plate"
-msgstr "Kalte Druckplatte"
+msgid "Smooth Cool Plate"
+msgstr "Glatte kalte Druckplatte"
 
 msgid "Engineering Plate"
 msgstr "Technische Druckplatte"
 
+msgid "Smooth High Temp Plate"
+msgstr "Glatte Hochtemperatur-Druckplatte"
+
+msgid "Textured Cool Plate"
+msgstr "Strukturierte kalte Druckplatte"
+
 msgid "First layer print sequence"
 msgstr "Erste Schicht Druckreihenfolge"
 
@@ -10272,7 +10308,7 @@ msgstr ""
 "in denen Brücken nicht verankert werden können."
 
 msgid "Reverse on even"
-msgstr ""
+msgstr "Umkehren auf geraden Schichten"
 
 msgid "Overhang reversal"
 msgstr "Überhangsumkehr"
@@ -10285,6 +10321,12 @@ msgid ""
 "This setting can also help reduce part warping due to the reduction of "
 "stresses in the part walls."
 msgstr ""
+"Extrudieren Sie Umfänge, die über einem Überhang liegen, in umgekehrter "
+"Richtung auf geraden Schichten. Dieses abwechselnde Muster kann steile "
+"Überhänge drastisch verbessern.\n"
+"\n"
+"Diese Einstellung kann auch dazu beitragen, das Verziehen des Teils aufgrund "
+"der Reduzierung der Spannungen in den Teilwänden zu verringern."
 
 msgid "Reverse only internal perimeters"
 msgstr "Nur interne Umfänge umkehren"
@@ -10303,6 +10345,20 @@ msgid ""
 "Reverse Threshold to 0 so that all internal walls print in alternating "
 "directions on even layers irrespective of their overhang degree."
 msgstr ""
+"Wenden Sie die Logik der umgekehrten Umfänge nur auf interne Umfänge an.\n"
+"\n"
+"Diese Einstellung reduziert die Spannungen im Teil erheblich, da sie jetzt "
+"in abwechselnde Richtungen verteilt sind. Dies sollte das Verziehen des "
+"Teils reduzieren und gleichzeitig die Qualität der äußeren Wand erhalten. "
+"Diese Funktion kann sehr nützlich für Materialien sein, die zum Verziehen "
+"neigen, wie ABS/ASA, und auch für elastische Filamente, wie TPU und Seiden-"
+"PLA. Sie kann auch dazu beitragen, das Verziehen in schwebenden Bereichen "
+"über Stützen zu reduzieren.\n"
+"\n"
+"Damit diese Einstellung am effektivsten ist, wird empfohlen, den "
+"Umkehrschwellenwert auf 0 zu setzen, damit alle internen Wände auf geraden "
+"Schichten unabhängig von ihrem Überhangswinkel in abwechselnden Richtungen "
+"gedruckt werden."
 
 msgid "Bridge counterbore holes"
 msgstr "Brücken für Senkungen"
@@ -10339,6 +10395,9 @@ msgid ""
 "useful. Can be a % of the perimeter width.\n"
 "Value 0 enables reversal on every even layers regardless."
 msgstr ""
+"Anzahl der Millimeter, die der Überhang betragen muss, damit die Umkehrung "
+"als nützlich angesehen wird. Kann ein Prozentsatz der Umfangsbreite sein.\n"
+"Der Wert 0 aktiviert die Umkehrung auf jeder geraden Schicht."
 
 msgid "Classic mode"
 msgstr "Klassicher Modus"
@@ -10942,6 +11001,12 @@ msgid ""
 "\n"
 "This option will be disabled if spiral vase mode is enabled."
 msgstr ""
+"Die Richtung, in der die Wand-Schleifen extrudiert werdenStandardmäßig "
+"werden alle Wände gegen den Uhrzeigersinn extrudiert, es sei denn, die "
+"Option Umkehrung bei geraden Schichten ist aktiviert. Wenn diese Option auf "
+"einen anderen Wert als Auto gesetzt wird, wird die Wandrichtung unabhängig "
+"von der Umkehrung bei geraden Schichten festgelegt.\n"
+"Diese Option wird deaktiviert, wenn der Spiral-Vase-Modus aktiviert ist."
 
 msgid "Counter clockwise"
 msgstr "Gegen den Uhrzeigersinn"
@@ -11111,9 +11176,9 @@ msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)"
 msgstr "Pressure advance(Klipper)AKA Linear advance Faktor(Marlin)"
 
 msgid "Enable adaptive pressure advance (beta)"
-msgstr ""
+msgstr "Adaptive Pressure Advance aktivieren (Beta)"
 
-#, c-format, boost-format
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -11159,6 +11224,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr "Adaptive Pressure Advance Messung (experimentell)"
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -17691,6 +17757,9 @@ msgstr ""
 "wie z.B. ABS, durch eine entsprechende Erhöhung der Heizbetttemperatur die "
 "Wahrscheinlichkeit von Verwerfungen verringert werden kann."
 
+#~ msgid "Cool Plate"
+#~ msgstr "Kalte Druckplatte"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Umkehren bei ungeraden Schichten"
 

localization/i18n/en/OrcaSlicer_en.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -5755,6 +5755,9 @@ msgstr ""
 msgid "Edit current plate name"
 msgstr ""
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr ""
 
@@ -7652,6 +7655,14 @@ msgstr ""
 "This is the bed temperature when the cool plate is installed. A value of 0 "
 "means the filament does not support printing on the Cool Plate."
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Engineering plate"
 
@@ -9429,6 +9440,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9463,6 +9479,11 @@ msgstr ""
 "This is the bed temperature of the first layer. A value of 0 means the "
 "filament does not support printing on the Cool Plate."
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9487,12 +9508,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Bed types supported by the printer"
 
-msgid "Cool Plate"
-msgstr "Cool Plate"
+msgid "Smooth Cool Plate"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Engineering Plate"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "First layer print sequence"
 
@@ -10405,7 +10432,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
-#, c-format, boost-format
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10430,6 +10457,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -16116,6 +16144,9 @@ msgstr ""
 "ABS, appropriately increasing the heatbed temperature can reduce the "
 "probability of warping?"
 
+#~ msgid "Cool Plate"
+#~ msgstr "Cool Plate"
+
 #~ msgid ""
 #~ "While printing by Object, the extruder may collide skirt.\n"
 #~ "Thus, reset the skirt layer to 1 to avoid that."

localization/i18n/es/OrcaSlicer_es.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Carlos Fco. Caruncho Serrano <puzzlero@gmail.com>\n"
 "Language-Team: \n"
@@ -4837,10 +4837,10 @@ msgid "Clone copies of selections"
 msgstr "Clonar copias de selecciones"
 
 msgid "Duplicate Current Plate"
-msgstr ""
+msgstr "Duplicar Placa Actual"
 
 msgid "Duplicate the current plate"
-msgstr ""
+msgstr "Duplicar la placa actual"
 
 msgid "Select all"
 msgstr "Seleccionar Todo"
@@ -4891,7 +4891,7 @@ msgid "Show object overhang highlight in 3D scene"
 msgstr "Mostrar resalte de voladizos de objeto en escena 3D"
 
 msgid "Show Selected Outline (Experimental)"
-msgstr "Mostrar esquema seleccionado (Experimental)"
+msgstr "Mostrar Contorno Seleccionado (Experimental)"
 
 msgid "Show outline around selected object in 3D scene"
 msgstr "Mostrar el contorno alrededor del objeto seleccionado en la escena 3D"
@@ -5961,6 +5961,9 @@ msgstr "Bloquear bandeja actual"
 msgid "Edit current plate name"
 msgstr "Editar el nombre de la bandeja actual"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Personalizar bandeja actual"
 
@@ -7946,6 +7949,14 @@ msgstr ""
 "Un valor de 0 significa que el filamento no admite la impresión en la "
 "Bandeja Fría"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Bandeja de Ingeniería"
 
@@ -7976,7 +7987,7 @@ msgid ""
 "Bed temperature when Textured PEI Plate is installed. Value 0 means the "
 "filament does not support to print on the Textured PEI Plate"
 msgstr ""
-"Temperatura del lecho cuando la Bandeja PEI Texturizada está instalada. El "
+"Temperatura de la cama cuando la Bandeja PEI Texturizada está instalada. El "
 "valor 0 significa que el filamento no es compatible para imprimir en la "
 "Bandeja PEI Texturizada"
 
@@ -9851,6 +9862,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9887,6 +9903,11 @@ msgstr ""
 "Esta es la temperatura de la cama de la primera capa. Un valor de 0 "
 "significa que el filamento no admite la impresión en la Bandeja Fría"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9913,12 +9934,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Tipos de cama que admite la impresora"
 
-msgid "Cool Plate"
-msgstr "Bandeja Fría"
+msgid "Smooth Cool Plate"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Bandeja de Ingeniería"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Secuencia de impresión de primera capa"
 
@@ -10234,7 +10261,7 @@ msgstr ""
 "puentes no pueden ser anclados."
 
 msgid "Reverse on even"
-msgstr ""
+msgstr "Revertir en sentido inverso"
 
 msgid "Overhang reversal"
 msgstr "Inversión de voladizo"
@@ -10247,6 +10274,12 @@ msgid ""
 "This setting can also help reduce part warping due to the reduction of "
 "stresses in the part walls."
 msgstr ""
+"Extruya los perímetros que tienen una parte sobre un voladizo en sentido "
+"inverso en capas pares. Este patrón alterno puede mejorar drásticamente los "
+"voladizos pronunciados.\n"
+"\n"
+"Este ajuste también puede ayudar a reducir el warping de la pieza debido a "
+"la reducción de tensiones en las paredes de la pieza."
 
 msgid "Reverse only internal perimeters"
 msgstr "Invertir solo los perímetros internos"
@@ -10265,6 +10298,18 @@ msgid ""
 "Reverse Threshold to 0 so that all internal walls print in alternating "
 "directions on even layers irrespective of their overhang degree."
 msgstr ""
+"Aplique la lógica de perímetros inversos sólo en perímetros internos.\n"
+"\n"
+"Esta configuración reduce en gran medida las tensiones de la pieza, ya que "
+"ahora se distribuyen en direcciones alternas. Esto debería reducir el alabeo "
+"de la pieza mientras se mantiene la calidad de la pared externa. Esta "
+"característica puede ser muy útil para materiales propensos al alabeo, como "
+"ABS/ASA, y también para filamentos elásticos, como TPU y Silk PLA. También "
+"puede ayudar a reducir el alabeo en regiones flotantes sobre soportes.\n"
+"\n"
+"Para que este ajuste sea más eficaz, se recomienda establecer el Umbral "
+"inverso en 0 para que todas las paredes internas se impriman en direcciones "
+"alternas en capas iguales, independientemente de su grado de voladizo."
 
 msgid "Bridge counterbore holes"
 msgstr "Crear puentes en agujeros con avellanado"
@@ -10302,6 +10347,9 @@ msgid ""
 "useful. Can be a % of the perimeter width.\n"
 "Value 0 enables reversal on every even layers regardless."
 msgstr ""
+"Número de mm que debe tener el voladizo para que la inversión se considere "
+"útil. Puede ser % del ancho del perímetro.\n"
+"El valor 0 permite la inversión en todas las capas pares."
 
 msgid "Classic mode"
 msgstr "Modo clásico"
@@ -10624,6 +10672,33 @@ msgid ""
 "overhang. This option is useful for heavily slanted top surface models. "
 "However, in most cases it creates too many unnecessary bridges."
 msgstr ""
+"Esta opción puede ayudar a reducir el acolchado en las superficies "
+"superiores de los modelos muy inclinados o curvados.\n"
+"\n"
+"Por defecto, los pequeños puentes internos se filtran y el relleno sólido "
+"interno se imprime directamente sobre el relleno disperso. Esto funciona "
+"bien en la mayoría de los casos, acelerando la impresión sin comprometer "
+"demasiado la calidad de la superficie superior.\n"
+"\n"
+"Sin embargo, en modelos muy inclinados o curvados, especialmente cuando se "
+"utiliza una densidad de relleno disperso demasiado baja, esto puede dar "
+"lugar a la curvatura del relleno sólido no soportado, causando pillowing.\n"
+"\n"
+"Si se desactiva esta opción, se imprimirá la capa puente interna sobre el "
+"relleno sólido interno ligeramente sin soporte. Las opciones siguientes "
+"controlan la cantidad de filtrado, es decir, la cantidad de puentes internos "
+"creados.\n"
+"\n"
+"Filtro - active esta opción. Este es el comportamiento por defecto y "
+"funciona bien en la mayoría de los casos.\n"
+"\n"
+"Filtrado limitado - crea puentes internos en superficies muy inclinadas, "
+"evitando crear puentes internos innecesarios. Esto funciona bien para la "
+"mayoría de los modelos difíciles.\n"
+"\n"
+"Sin filtro: crea puentes internos en todos los posibles salientes internos. "
+"Esta opción es útil para modelos de superficie superior muy inclinada. Sin "
+"embargo, en la mayoría de los casos crea demasiados puentes innecesarios."
 
 msgid "Filter"
 msgstr "Filtro"
@@ -10880,6 +10955,15 @@ msgid ""
 "\n"
 "This option will be disabled if spiral vase mode is enabled."
 msgstr ""
+"La dirección en la que se extruyen los bucles de pared cuando se mira hacia "
+"abajo desde la parte superior.\n"
+"\n"
+"Por defecto, todos los muros se extruyen en el sentido contrario a las "
+"agujas del reloj, a menos que esté activada la opción Invertir en par. "
+"Establecer esto a cualquier opción que no sea Auto forzará la dirección de "
+"la pared independientemente de la Inversión en par.\n"
+"\n"
+"Esta opción estará desactivada si el modo jarrón en espiral está activado."
 
 msgid "Counter clockwise"
 msgstr "En sentido contrario a las agujas del reloj"
@@ -11051,7 +11135,7 @@ msgstr "Pressure Advance(Klipper) AKA Factor de avance lineal(Marlin)"
 msgid "Enable adaptive pressure advance (beta)"
 msgstr "Activar Avance de Presión Lineal Adaptativo (beta)"
 
-#, c-format, boost-format
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -11095,6 +11179,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr "Medidas de avance lineal de presión adaptativo (beta)"
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -15095,13 +15180,14 @@ msgstr "Tamaño del cuadro delimitador de la primera capa"
 
 msgid "Bottom-left corner of print bed bounding box"
 msgstr ""
-"Esquina inferior izquierda del cuadro delimitador del lecho de impresión"
+"Esquina inferior izquierda del cuadro delimitador de la cama de impresión"
 
 msgid "Top-right corner of print bed bounding box"
-msgstr "Esquina superior derecha del cuadro delimitador del lecho de impresión"
+msgstr ""
+"Esquina superior derecha del cuadro delimitador de la cama de impresión"
 
 msgid "Size of the print bed bounding box"
-msgstr "Tamaño del cuadro delimitador del lecho de impresión"
+msgstr "Tamaño del cuadro delimitador de la cama de impresión"
 
 msgid "Timestamp"
 msgstr "Marca de tiempo"
@@ -17644,9 +17730,12 @@ msgid ""
 msgstr ""
 "Evite la deformación\n"
 "Sabías que al imprimir materiales propensos a la deformación como el ABS, "
-"aumentar adecuadamente la temperatura del lecho térmico puede reducir la "
+"aumentar adecuadamente la temperatura de la cama térmica puede reducir la "
 "probabilidad de deformaciones."
 
+#~ msgid "Cool Plate"
+#~ msgstr "Bandeja Fría"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Invertir en impar"
 

localization/i18n/fr/OrcaSlicer_fr.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril, Thomas Lété\n"
@@ -4832,10 +4832,10 @@ msgid "Clone copies of selections"
 msgstr "Cloner des copies de sélections"
 
 msgid "Duplicate Current Plate"
-msgstr ""
+msgstr "Dupliquer la plaque actuelle"
 
 msgid "Duplicate the current plate"
-msgstr ""
+msgstr "Dupliquer la plaque actuelle"
 
 msgid "Select all"
 msgstr "Tout sélectionner"
@@ -5885,7 +5885,7 @@ msgid "Sensitivity of pausing is"
 msgstr "La sensibilité de pause est"
 
 msgid "Enable detection of build plate position"
-msgstr "Activation de la détection de la position de la plaque"
+msgstr "Activation de la détection de la position du plateau"
 
 msgid ""
 "The localization tag of build plate is detected, and printing is paused if "
@@ -5963,6 +5963,9 @@ msgstr "Verrouiller le plateau actuel"
 msgid "Edit current plate name"
 msgstr "Modifier le nom du plateau actuel"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Personnaliser le plateau actuel"
 
@@ -7990,6 +7993,17 @@ msgstr ""
 "plate\") est installé. Une valeur à 0 signifie que ce filament ne peut pas "
 "être imprimé sur le plateau froid."
 
+msgid "Textured Cool plate"
+msgstr "Plaque Cool plate texturée"
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+"Température du plateau lorsque la plaque Cool plate est installée. La valeur "
+"0 signifie que le filament ne peut pas être imprimé sur la plaque Cool plate "
+"texturée."
+
 msgid "Engineering plate"
 msgstr "Plaque Engineering"
 
@@ -9935,6 +9949,14 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+"Température du plateau pour les couches à l’exception de la couche initiale. "
+"La valeur 0 signifie que le filament ne peut pas être imprimé sur la plaque "
+"Cool plate texturée."
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9972,6 +9994,13 @@ msgstr ""
 "0 signifie que ce filament ne peut pas être imprimé sur le plateau froid "
 "(\"Cool plate\")."
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+"Température du plateau de la couche initiale. La valeur 0 signifie que le "
+"filament ne peut pas être imprimé sur la plaque Cool plate texturée."
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9998,12 +10027,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Types de plateaux pris en charge par l'imprimante"
 
-msgid "Cool Plate"
-msgstr "Cool Plate/Plaque PLA"
+msgid "Smooth Cool Plate"
+msgstr "Plaque Cool plate lisse"
 
 msgid "Engineering Plate"
 msgstr "Plaque Engineering"
 
+msgid "Smooth High Temp Plate"
+msgstr "Plaque lisse haute température"
+
+msgid "Textured Cool Plate"
+msgstr "Plaque Cool plate texturée"
+
 msgid "First layer print sequence"
 msgstr "Séquence d’impression de la première couche"
 
@@ -10321,7 +10356,7 @@ msgstr ""
 "les zones où les ponts ne peuvent pas être ancrés. "
 
 msgid "Reverse on even"
-msgstr ""
+msgstr "Inverser lors du passage pair"
 
 msgid "Overhang reversal"
 msgstr "Inversion du surplomb"
@@ -10334,6 +10369,12 @@ msgid ""
 "This setting can also help reduce part warping due to the reduction of "
 "stresses in the part walls."
 msgstr ""
+"Extruder les périmètres qui ont une partie au-dessus d’un surplomb dans le "
+"sens inverse sur des couches paires. Ce motif alternatif peut améliorer "
+"considérablement les surplombs prononcés.\n"
+"\n"
+"Ce paramètre peut également contribuer à réduire la déformation de la pièce "
+"en raison de la réduction des contraintes dans les parois de la pièce."
 
 msgid "Reverse only internal perimeters"
 msgstr "Inverser uniquement les périmètres internes"
@@ -10352,6 +10393,21 @@ msgid ""
 "Reverse Threshold to 0 so that all internal walls print in alternating "
 "directions on even layers irrespective of their overhang degree."
 msgstr ""
+"Appliquer la logique d’inversion des périmètres uniquement sur les "
+"périmètres internes. \n"
+"\n"
+"Ce paramètre réduit considérablement les contraintes exercées sur les "
+"pièces, car elles sont désormais réparties dans des directions alternées. "
+"Cela devrait réduire la déformation des pièces tout en maintenant la qualité "
+"des parois externes. Cette fonction peut être très utile pour les matériaux "
+"sujets à la déformation, comme l’ABS/ASA, ainsi que pour les filaments "
+"élastiques, comme le TPU et le Silk PLA. Elle peut également contribuer à "
+"réduire la déformation des régions flottantes sur les supports.\n"
+"\n"
+"Pour que ce paramètre soit le plus efficace possible, il est recommandé de "
+"régler le seuil d’inversion sur 0 afin que toutes les parois internes "
+"s’impriment dans des directions alternées sur des couches régulières, quel "
+"que soit leur degré de surplomb."
 
 msgid "Bridge counterbore holes"
 msgstr "Trous d'alésage pour le pont"
@@ -10389,6 +10445,9 @@ msgid ""
 "useful. Can be a % of the perimeter width.\n"
 "Value 0 enables reversal on every even layers regardless."
 msgstr ""
+"Nombre de mm de dépassement nécessaire pour que l’inversion soit considérée "
+"comme utile. Il peut s’agir d’un pourcentage de la largeur du périmètre.\n"
+"La valeur 0 permet l’inversion sur toutes les couches paires."
 
 msgid "Classic mode"
 msgstr "Classique"
@@ -10427,6 +10486,24 @@ msgid ""
 "overhanging, with no wall supporting them from underneath, the 100% overhang "
 "speed will be applied."
 msgstr ""
+"Par exemple, un ralentissement supplémentaire sera appliqué lors de "
+"l’impression de surplombs sur des angles aigus comme l’avant de la coque du "
+"Benchy, réduisant ainsi l’enroulement qui s’aggrave sur plusieurs couches.\n"
+"\n"
+"Il est généralement recommandé d’activer cette option à moins que le "
+"refroidissement de votre imprimante soit suffisamment puissant ou que la "
+"vitesse d’impression soit suffisamment lente pour que le recourbement du "
+"périmètre ne se produise pas. Si vous imprimez avec une vitesse de périmètre "
+"externe élevée, ce paramètre peut introduire de légers artefacts lors du "
+"ralentissement en raison de la grande variance des vitesses d’impression. Si "
+"vous remarquez des artefacts, assurez-vous que votre avance de pression est "
+"réglée correctement.\n"
+"\n"
+"Remarque : lorsque cette option est activée, les périmètres en surplomb sont "
+"traités comme des surplombs, ce qui signifie que la vitesse de surplomb est "
+"appliquée même si le périmètre en surplomb fait partie d’un pont. Par "
+"exemple, lorsque les périmètres sont en surplomb de 100 %, sans paroi les "
+"soutenant par en dessous, la vitesse de surplomb de 100 % sera appliquée."
 
 msgid "mm/s or %"
 msgstr "mm/s ou %"
@@ -10662,7 +10739,7 @@ msgstr ""
 "à la désactiver si vous utilisez des buses larges."
 
 msgid "Filter out small internal bridges (beta)"
-msgstr ""
+msgstr "Filtrer les petits ponts internes (beta)"
 
 msgid ""
 "This option can help reducing pillowing on top surfaces in heavily slanted "
@@ -10692,9 +10769,38 @@ msgid ""
 "overhang. This option is useful for heavily slanted top surface models. "
 "However, in most cases it creates too many unnecessary bridges."
 msgstr ""
+"Cette option permet de réduire la formation de cavités sur les surfaces "
+"supérieures des modèles fortement inclinés ou courbés.\n"
+"\n"
+"Par défaut, les petits ponts internes sont filtrés et le remplissage solide "
+"interne est imprimé directement sur le remplissage peu dense. Cela "
+"fonctionne bien dans la plupart des cas, accélérant l'impression sans trop "
+"compromettre la qualité de la surface supérieure. \n"
+"\n"
+"Cependant, dans les modèles fortement inclinés ou courbés, en particulier "
+"lorsque la densité de remplissage est trop faible, il peut en résulter un "
+"gondolement du remplissage solide non soutenu, ce qui provoque un effet de "
+"capitonnage.\n"
+"\n"
+"En désactivant cette option, la couche de pont interne sera imprimée sur un "
+"remplissage solide interne légèrement non soutenu. Les options ci-dessous "
+"contrôlent la quantité de filtrage, c’est-à-dire la quantité de ponts "
+"internes créés.\n"
+"\n"
+"Filtre - activez cette option. C’est le comportement par défaut et il "
+"fonctionne bien dans la plupart des cas.\n"
+"\n"
+"Filtrage limité - crée des ponts internes sur les surfaces fortement "
+"inclinées, tout en évitant de créer des ponts internes inutiles. Cette "
+"option fonctionne bien pour la plupart des modèles difficiles.\n"
+"\n"
+"Pas de filtrage - crée des ponts internes sur chaque surplomb interne "
+"potentiel. Cette option est utile pour les modèles à surface supérieure "
+"fortement inclinée. Cependant, dans la plupart des cas, elle crée trop de "
+"ponts inutiles."
 
 msgid "Filter"
-msgstr ""
+msgstr "Filtrer"
 
 msgid "Limited filtering"
 msgstr "Filtrage limité"
@@ -10955,6 +11061,16 @@ msgid ""
 "\n"
 "This option will be disabled if spiral vase mode is enabled."
 msgstr ""
+"La direction dans laquelle les boucles de la paroi sont extrudées lorsque "
+"l’on regarde du haut vers le bas.\n"
+"\n"
+"Par défaut, toutes les parois sont extrudées dans le sens inverse des "
+"aiguilles d’une montre, sauf si l’option Inverser le sens des aiguilles "
+"d’une montre est activée. Si vous choisissez une option autre qu’Auto, la "
+"direction des parois sera forcée, indépendamment de l’option Inverser le "
+"sens des aiguilles d’une montre.\n"
+"\n"
+"Cette option sera désactivée si le mode vase en spirale est activé."
 
 msgid "Counter clockwise"
 msgstr "Sens inverse des aiguilles d’une montre"
@@ -11126,7 +11242,7 @@ msgstr "Pressure Advance (Klipper) AKA Linear Advance (Marlin)"
 msgid "Enable adaptive pressure advance (beta)"
 msgstr "Activer l’avance de pression adaptative (beta)"
 
-#, c-format, boost-format
+#, fuzzy, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -11147,10 +11263,32 @@ msgid ""
 "and for when tool changing.\n"
 "\n"
 msgstr ""
+"Avec l’augmentation des vitesses d’impression (et donc du débit volumétrique "
+"à travers la buse) et des accélérations, il a été observé que la valeur "
+"effective de PA diminue généralement. Cela signifie qu’une valeur PA unique "
+"n’est pas toujours optimale à 100% pour toutes les caractéristiques et "
+"qu’une valeur de compromis est généralement utilisée pour éviter de trop "
+"bomber les caractéristiques avec une vitesse d’écoulement et des "
+"accélérations plus faibles, tout en évitant de créer des lacunes sur les "
+"caractéristiques plus rapides.\n"
+"\n"
+"Cette fonction vise à remédier à cette limitation en modélisant la réponse "
+"du système d’extrusion de votre imprimante en fonction de la vitesse du flux "
+"volumétrique et de l’accélération de l’impression. En interne, elle génère "
+"un modèle ajusté qui peut extrapoler l’avance de pression nécessaire pour "
+"une vitesse de flux volumétrique et une accélération données, qui est "
+"ensuite transmise à l’imprimante en fonction des conditions d’impression "
+"actuelles.\n"
+"\n"
+"Lorsqu’elle est activée, la valeur de l’avance de pression ci-dessus est "
+"remplacée. Cependant, une valeur par défaut raisonnable est fortement "
+"recommandée pour servir de solution de secours et en cas de changement "
+"d’outil.\n"
 
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr "Mesures adaptatives de l’avance de pression (beta)"
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -11427,6 +11565,9 @@ msgid ""
 "if you measure 94mm instead of 100mm). The part will be scaled in Z to "
 "compensate."
 msgstr ""
+"Entrez le pourcentage de rétrécissement que le filament obtiendra après "
+"refroidissement (94% si vous mesurez 94mm au lieu de 100mm). La pièce sera "
+"mise à l’échelle en Z pour compenser."
 
 msgid "Loading speed"
 msgstr "Vitesse de chargement"
@@ -12279,7 +12420,7 @@ msgstr ""
 "hauteur de couche d'origine."
 
 msgid "Infill combination - Max layer height"
-msgstr ""
+msgstr "Combinaison de remplissage - Hauteur maximale de la couche"
 
 msgid ""
 "Maximum layer height for the combined sparse infill. \n"
@@ -12293,6 +12434,19 @@ msgid ""
 "Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values "
 "(eg 80%). This value must not be larger than the nozzle diameter."
 msgstr ""
+"Hauteur maximale de la couche pour le remplissage peu dense combiné. \n"
+"\n"
+"Réglez cette valeur à 0 ou 100% pour utiliser le diamètre de la buse (pour "
+"une réduction maximale du temps d’impression) ou une valeur de ~80% pour "
+"maximiser la force du remplissage peu dense.\n"
+"\n"
+"Le nombre de couches sur lesquelles le remplissage est combiné est obtenu en "
+"divisant cette valeur par la hauteur de la couche et arrondi à la décimale "
+"inférieure la plus proche.\n"
+"\n"
+"Utilisez des valeurs absolues en mm (par exemple, 0,32 mm pour une buse de "
+"0,4 mm) ou des valeurs en % (par exemple, 80 %). Cette valeur ne doit pas "
+"être supérieure au diamètre de la buse."
 
 msgid "Filament to print internal sparse infill."
 msgstr "Filament pour imprimer un remplissage interne."
@@ -13533,12 +13687,15 @@ msgid "Distance from skirt to brim or object"
 msgstr "Distance de la jupe au bord ou à l'objet"
 
 msgid "Skirt start point"
-msgstr ""
+msgstr "Point de départ de la jupe"
 
 msgid ""
 "Angle from the object center to skirt start point. Zero is the most right "
 "position, counter clockwise is positive angle."
 msgstr ""
+"Angle entre le centre de l’objet et le point de départ de la jupe. Le zéro "
+"est la position la plus à droite, le sens inverse des aiguilles d’une montre "
+"est un angle positif."
 
 msgid "Skirt height"
 msgstr "Hauteur de la jupe"
@@ -13560,6 +13717,17 @@ msgid ""
 "distance from the object. Therefore, if brims are active it may intersect "
 "with them. To avoid this, increase the skirt distance value.\n"
 msgstr ""
+"Un paravent est utile pour protéger une impression ABS ou ASA contre la "
+"déformation et le détachement du plateau d’impression en raison des courants "
+"d’air. Il n’est généralement nécessaire que pour les imprimantes à structure "
+"ouverte, c’est-à-dire sans boîtier. \n"
+"\n"
+"Activé = la hauteur de la jupe est égale à celle de l’objet imprimé le plus "
+"haut. Sinon, c’est la « hauteur de la jupe » qui est utilisée.\n"
+"Remarque : lorsque le paravent est actif, la jupe est imprimée à la distance "
+"de la jupe par rapport à l’objet. Par conséquent, si des bordures sont "
+"actives, elle peut les croiser. Pour éviter cela, augmentez la valeur de la "
+"distance de la jupe.\n"
 
 msgid "Disabled"
 msgstr "Désactivé"
@@ -13568,18 +13736,20 @@ msgid "Enabled"
 msgstr "Activé"
 
 msgid "Skirt type"
-msgstr ""
+msgstr "Type de jupe"
 
 msgid ""
 "Combined - single skirt for all objects, Per object - individual object "
 "skirt."
 msgstr ""
+"Combiné - une seule jupe pour tous les objets, Par objet - une jupe pour "
+"chaque objet."
 
 msgid "Combined"
-msgstr ""
+msgstr "Combiné"
 
 msgid "Per object"
-msgstr ""
+msgstr "Par objet"
 
 msgid "Skirt loops"
 msgstr "Boucles de la jupe"
@@ -13607,6 +13777,14 @@ msgid ""
 "Final number of loops is not taling into account whli arranging or "
 "validating objects distance. Increase loop number in such case. "
 msgstr ""
+"Longueur minimale d’extrusion du filament en mm lors de l’impression de la "
+"jupe. Zéro signifie que cette fonction est désactivée.\n"
+"\n"
+"L’utilisation d’une valeur non nulle est utile si l’imprimante est "
+"configurée pour imprimer sans ligne d’amorce.\n"
+"Le nombre final de boucles n’est pas pris en compte lors de la disposition "
+"ou de la validation de la distance des objets. Dans ce cas, augmenter le "
+"nombre de boucles. "
 
 msgid ""
 "The printing speed in exported gcode will be slowed down, when the estimated "
@@ -14064,7 +14242,7 @@ msgstr ""
 "similaire aux supports normaux sous de grands surplombs plats."
 
 msgid "Default (Grid/Organic"
-msgstr ""
+msgstr "Défaut (Grille/Organique)"
 
 msgid "Snug"
 msgstr "Ajusté"
@@ -17726,6 +17904,9 @@ msgstr ""
 "déformer, tels que l’ABS, une augmentation appropriée de la température du "
 "plateau chauffant peut réduire la probabilité de déformation."
 
+#~ msgid "Cool Plate"
+#~ msgstr "Cool Plate/Plaque PLA"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Parois inversées sur couches impaires"
 

localization/i18n/hu/OrcaSlicer_hu.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -5800,6 +5800,9 @@ msgstr ""
 msgid "Edit current plate name"
 msgstr ""
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr ""
 
@@ -7725,6 +7728,14 @@ msgstr ""
 "Asztalhőmérséklet a hideg tálca használatával. A 0 érték azt jelenti, hogy a "
 "filament nem támogatja a Cool Plate-re történő nyomtatást"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Engineering plate"
 
@@ -9542,6 +9553,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9576,6 +9592,11 @@ msgstr ""
 "A kezdőréteg asztalhőmérséklete. A 0 érték azt jelenti, hogy a filament nem "
 "támogatja a Cool Plate-re történő nyomtatást"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9600,12 +9621,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Nyomtató által támogatott asztaltípusok"
 
-msgid "Cool Plate"
-msgstr "Cool Plate"
+msgid "Smooth Cool Plate"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Engineering Plate"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Az első réteg nyomtatási sorrendje"
 
@@ -10520,7 +10547,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
-#, c-format, boost-format
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10545,6 +10572,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -16304,6 +16332,9 @@ msgstr ""
 "Tudtad, hogy a vetemedésre hajlamos anyagok (például ABS) nyomtatásakor a "
 "tárgyasztal hőmérsékletének növelése csökkentheti a vetemedés valószínűségét?"
 
+#~ msgid "Cool Plate"
+#~ msgstr "Cool Plate"
+
 #~ msgid ""
 #~ "While printing by Object, the extruder may collide skirt.\n"
 #~ "Thus, reset the skirt layer to 1 to avoid that."

localization/i18n/it/OrcaSlicer_it.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -5915,6 +5915,9 @@ msgstr "Piastra corrente di blocco"
 msgid "Edit current plate name"
 msgstr "Modificare il nome del piatto corrente"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Personalizza la piastra corrente"
 
@@ -7878,6 +7881,14 @@ msgstr ""
 "Temperatura del piano quando è installato il piatto Cool Plate. Il valore 0 "
 "significa che il filamento non supporta la stampa su piatto Cool Plate."
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Engineering plate"
 
@@ -9766,6 +9777,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9800,6 +9816,11 @@ msgstr ""
 "Indica la temperatura del piano del primo layer. Un valore pari a 0 indica "
 "che il filamento non supporta la stampa sul piatto Cool Plate."
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9824,12 +9845,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Tipi di piatti supportati dalla stampante"
 
-msgid "Cool Plate"
-msgstr "Cool Plate"
+msgid "Smooth Cool Plate"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Engineering Plate"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Sequenza di stampa del primo strato"
 
@@ -10864,7 +10891,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
-#, c-format, boost-format
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10889,6 +10916,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -17149,6 +17177,9 @@ msgstr ""
 "aumentare in modo appropriato la temperatura del piano riscaldato può "
 "ridurre la probabilità di deformazione."
 
+#~ msgid "Cool Plate"
+#~ msgstr "Cool Plate"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Retromarcia su dispari"
 

localization/i18n/ja/OrcaSlicer_ja.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -5720,6 +5720,9 @@ msgstr ""
 msgid "Edit current plate name"
 msgstr ""
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr ""
 
@@ -7586,6 +7589,14 @@ msgstr ""
 "常温プレートが装着時のベッド温度です。値が0の場合、フィラメントが常温プレート"
 "に使用できない意味です。"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "エンジニアリングプレート"
 
@@ -9343,6 +9354,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9377,6 +9393,11 @@ msgstr ""
 "1層目のベッド温度です。値が0の場合、フィラメントが常温プレートに使用できない"
 "意味です。"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9401,12 +9422,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "適応ベッド種類"
 
-msgid "Cool Plate"
-msgstr "常温プレート"
+msgid "Smooth Cool Plate"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "エンジニアリングプレート"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "First layer print sequence"
 
@@ -10295,7 +10322,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
-#, c-format, boost-format
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10320,6 +10347,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -15981,6 +16009,9 @@ msgstr ""
 "ABS, appropriately increasing the heatbed temperature can reduce the "
 "probability of warping?"
 
+#~ msgid "Cool Plate"
+#~ msgstr "常温プレート"
+
 #~ msgid ""
 #~ "While printing by Object, the extruder may collide skirt.\n"
 #~ "Thus, reset the skirt layer to 1 to avoid that."

localization/i18n/ko/OrcaSlicer_ko.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: 2024-05-31 23:33+0900\n"
 "Last-Translator: ElectricalBoy <15651807+ElectricalBoy@users.noreply.github."
 "com>\n"
@@ -5763,6 +5763,9 @@ msgstr "현재 플레이트 잠금"
 msgid "Edit current plate name"
 msgstr "현재 번호판 이름 수정"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "사용자 정의 플레이트"
 
@@ -7650,6 +7653,14 @@ msgstr ""
 "쿨 플레이트 설치 시 베드 온도. 값 0은 필라멘트가 쿨 플레이트에 출력하는 것을 "
 "지원하지 않음을 의미합니다"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "엔지니어링 플레이트"
 
@@ -9461,6 +9472,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9495,6 +9511,11 @@ msgstr ""
 "초기 레이어의 베드 온도. 값 0은 필라멘트가 쿨 플레이트 출력을 지원하지 않음"
 "을 의미합니다"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9519,12 +9540,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "프린터가 지원하는 베드 유형"
 
-msgid "Cool Plate"
-msgstr "쿨 플레이트"
+msgid "Smooth Cool Plate"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "엔지니어링 플레이트"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "첫 레이어 출력 순서"
 
@@ -10502,7 +10529,7 @@ msgstr "프레셔 어드밴스(Klipper)/리니어 어드밴스(Marlin)"
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
-#, c-format, boost-format
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10527,6 +10554,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -16533,6 +16561,9 @@ msgstr ""
 "ABS와 같이 뒤틀림이 발생하기 쉬운 소재를 출력할 때, 히트베드 온도를 적절하게 "
 "높이면 뒤틀림 가능성을 줄일 수 있다는 사실을 알고 계셨나요?"
 
+#~ msgid "Cool Plate"
+#~ msgstr "쿨 플레이트"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "홀수에 반전"
 

localization/i18n/nl/OrcaSlicer_nl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -5853,6 +5853,9 @@ msgstr ""
 msgid "Edit current plate name"
 msgstr ""
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr ""
 
@@ -7836,6 +7839,14 @@ msgstr ""
 "Dit is de bedtemperatuur wanneer de koelplaat is geïnstalleerd. Een waarde "
 "van 0 betekent dat het filament printen op de Cool Plate niet ondersteunt."
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Engineering plaat"
 
@@ -9676,6 +9687,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9711,6 +9727,11 @@ msgstr ""
 "Dit is de bedtemperatuur van de beginlaag. Een waarde van 0 betekent dat het "
 "filament printen op de Cool Plate niet ondersteunt."
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9735,12 +9756,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Printbedden ondersteund door de printer"
 
-msgid "Cool Plate"
-msgstr "Cool (koud) printbed"
+msgid "Smooth Cool Plate"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Engineering plate (technisch printbed)"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Afdrukvolgorde van de eerste laag"
 
@@ -10664,7 +10691,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
-#, c-format, boost-format
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10689,6 +10716,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -16555,6 +16583,9 @@ msgstr ""
 "kromtrekken, zoals ABS, een juiste verhoging van de temperatuur van het "
 "warmtebed de kans op kromtrekken kan verkleinen?"
 
+#~ msgid "Cool Plate"
+#~ msgstr "Cool (koud) printbed"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Overhang omkering"
 

localization/i18n/pl/OrcaSlicer_pl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer 2.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Krzysztof Morga <tlumaczeniebs@gmail.com>\n"
 "Language-Team: \n"
@@ -13,7 +13,7 @@ msgstr ""
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=3; plural=(n==1 ? 0 : n%10>=2 && n%10<=4 && (n%100<12 "
 "|| n%100>14) ? 1 : 2);\n"
-"X-Generator: Poedit 3.4.4\n"
+"X-Generator: Poedit 3.5\n"
 
 msgid "Supports Painting"
 msgstr "Malowanie podpór"
@@ -1983,7 +1983,7 @@ msgid "Center"
 msgstr "Wyśrodkuj"
 
 msgid "Drop"
-msgstr ""
+msgstr "Upuść"
 
 msgid "Edit Process Settings"
 msgstr "Edytuj ustawienia procesu"
@@ -4793,10 +4793,10 @@ msgid "Clone copies of selections"
 msgstr "Tworzy kopie zaznaczeń"
 
 msgid "Duplicate Current Plate"
-msgstr ""
+msgstr "Duplikuj bieżącą płytę"
 
 msgid "Duplicate the current plate"
-msgstr ""
+msgstr "Duplikuj bieżącą płytę"
 
 msgid "Select all"
 msgstr "Zaznacz wszystko"
@@ -4847,10 +4847,10 @@ msgid "Show object overhang highlight in 3D scene"
 msgstr "Pokaż podświetlenie nawisów obiektów w scenie 3D"
 
 msgid "Show Selected Outline (Experimental)"
-msgstr ""
+msgstr "Wyświetl zaznaczony kontur (eksperymentalne)"
 
 msgid "Show outline around selected object in 3D scene"
-msgstr ""
+msgstr "Pokaż kontur wokół zaznaczonego obiektu w scenie 3D"
 
 msgid "Preferences"
 msgstr "Preferencje"
@@ -4874,16 +4874,16 @@ msgid "Flow rate test - Pass 2"
 msgstr "Test natężenia przepływu - Procedura 2"
 
 msgid "YOLO (Recommended)"
-msgstr ""
+msgstr "YOLO (Zalecane)"
 
 msgid "Orca YOLO flowrate calibration, 0.01 step"
-msgstr ""
+msgstr "Orca YOLO-kalibracja przepływu, krok 0.01"
 
 msgid "YOLO (perfectionist version)"
-msgstr ""
+msgstr "YOLO (wersja perfekcjonistyczna)"
 
 msgid "Orca YOLO flowrate calibration, 0.005 step"
-msgstr ""
+msgstr "Orca YOLO-kalibracja przepływu, krok 0.005"
 
 msgid "Flow rate"
 msgstr "Natężenie przepływu"
@@ -5916,6 +5916,9 @@ msgstr "Zablokuj bieżący stół"
 msgid "Edit current plate name"
 msgstr "Edytuj aktualną nazwę płyty"
 
+msgid "Move plate to the front"
+msgstr "Umieść płytę jako pierwszą"
+
 msgid "Customize current plate"
 msgstr "Dostosuj bieżący stół"
 
@@ -6604,13 +6607,13 @@ msgid "with OrcaSlicer so that Orca can open models from"
 msgstr "aktualne skojarzenie z OrcaSlicer, aby Orca mogła otwierać modele z"
 
 msgid "Current Association: "
-msgstr "Aktualnie powiązano:"
+msgstr "Aktualnie powiązano: "
 
 msgid "Current Instance"
 msgstr "Aktualna instancja"
 
 msgid "Current Instance Path: "
-msgstr "Aktualna ścieżka instancji:"
+msgstr "Aktualna ścieżka instancji: "
 
 msgid "General Settings"
 msgstr "Ustawienia Ogólne"
@@ -7878,6 +7881,16 @@ msgstr ""
 "Temperatura stołu, gdy zainstalowana jest Cool Plate. Wartość 0 oznacza, że "
 "filament nie jest przystosowany do druku na Cool Plate"
 
+msgid "Textured Cool plate"
+msgstr "Textured Cool plate"
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+"Temperatura stołu przy zainstalowanej Cool Plate. Wartość 0 oznacza, że "
+"filament nie jest przystosowany do druku na Textured Cool Plate"
+
 msgid "Engineering plate"
 msgstr "Engineering Plate"
 
@@ -8652,7 +8665,7 @@ msgid "Collapse/Expand the sidebar"
 msgstr "Zwiń/Rozwiń pasek boczny"
 
 msgid "⌘+Any arrow"
-msgstr ""
+msgstr "⌘+Dowolna strzałka"
 
 msgid "Movement in camera space"
 msgstr "Ruch w przestrzeni kamery"
@@ -9343,6 +9356,8 @@ msgid ""
 "While the object %1% itself fits the build volume, it exceeds the maximum "
 "build volume height because of material shrinkage compensation."
 msgstr ""
+"Chociaż obiekt %1% mieści się w objętości roboczej, przekracza maksymalną "
+"jej wysokość z powodu kompensacji skurczu materiału."
 
 #, boost-format
 msgid "The object %1% exceeds the maximum build volume height."
@@ -9561,6 +9576,8 @@ msgid ""
 "Filament shrinkage will not be used because filament shrinkage for the used "
 "filaments differs significantly."
 msgstr ""
+"Kompensacja skurczu filamentu nie będzie zastosowana, ponieważ skurcz "
+"używanych filamentów jest zbyt zróżnicowany."
 
 msgid "Generating skirt & brim"
 msgstr "Generowanie Skirtu i Brimu"
@@ -9775,6 +9792,13 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+"Temperatura stołu dla warstw, z wyjątkiem pierwszej. Wartość 0 oznacza, że "
+"filament nie nadaje się do druku na Textured Cool Plate"
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9809,6 +9833,13 @@ msgstr ""
 "Temperatura stołu pierwszej warstwy. Wartość 0 oznacza, że filament nie "
 "obsługuje drukowania na Cool Plate"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+"Temperatura stołu dla pierwszej warstwy. Wartość 0 oznacza, że filament nie "
+"nadaje się do druku na Textured Cool Plate"
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9833,12 +9864,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Rodzaje płyt roboczych obsługiwanych przez drukarkę"
 
-msgid "Cool Plate"
-msgstr "Cool Plate / PLA Plate"
+msgid "Smooth Cool Plate"
+msgstr "Smooth Cool Plate"
 
 msgid "Engineering Plate"
 msgstr "Engineering Plate"
 
+msgid "Smooth High Temp Plate"
+msgstr "Smooth High Temp Plate"
+
+msgid "Textured Cool Plate"
+msgstr "Textured Cool Plate"
+
 msgid "First layer print sequence"
 msgstr "Sekwencja druku pierwszej warstwy"
 
@@ -9916,6 +9953,33 @@ msgid ""
 "generator and use this option to control whether the cosmetic top and bottom "
 "surface gap fill is generated"
 msgstr ""
+"Włącza wypełnienie szczelin dla zaznaczonych powierzchni stałych. Minimalna "
+"długość szczeliny, która zostanie wypełniona, może być kontrolowana z opcji "
+"filtruj małe szczeliny znajdującej się poniżej.\n"
+"Opcje:\n"
+"1. Wszędzie: Zastosowuje wypełnienie szczelin do górnych, dolnych i "
+"wewnętrznych pełnych powierzchni dla maksymalnej wytrzymałości.\n"
+"2. Powierzchnie górne i dolne: Zastosowuje wypełnienie szczelin tylko do "
+"powierzchni górnej i dolnej, równoważąc szybkość druku, zmniejszając "
+"potencjalne nadmierne wytłaczanie dla wypełnienia pełnego i zapewniając, że "
+"górne i dolne powierzchnie nie mają dziur.\n"
+"3. Nigdzie: Wyłącza wypełnienie szczelin dla wszystkich obszarów pełnego "
+"wypełnienia.\n"
+"Zauważ, że jeśli używasz klasycznego generatora obrysów, wypełnienie "
+"szczelin może być również generowane między obrysami, jeśli linia o pełnej "
+"szerokości nie może się między nimi zmieścić. To wypełnienie szczelin między "
+"obrysami nie jest kontrolowane przez tę opcję.\n"
+"\n"
+"Jeśli chcesz usunąć wszystkie wypełnienia szczelin, w tym generowane przez "
+"klasyczny obrys, ustaw wartość filtra dla małych szczelin na dużą liczbę, na "
+"przykład 999999.\n"
+"\n"
+"Jednak nie jest to zalecane, ponieważ wypełnienie szczelin między obrysami "
+"przyczynia się do wytrzymałości modelu. Dla modeli, w których generowane "
+"jest nadmierne wypełnienie szczelin między obrysami, lepszą opcją byłoby "
+"przełączenie się na generator ścian arachne i użycie tej opcji do "
+"kontrolowania, czy kosmetyczne wypełnienie szczelin na górnej i dolnej "
+"powierzchni ma być generowane."
 
 msgid "Everywhere"
 msgstr "Wszędzie"
@@ -9995,6 +10059,12 @@ msgid ""
 "The actual bridge flow used is calculated by multiplying this value with the "
 "filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
+"Zmniejsz tę wartość (na przykład do 0.9), aby zredukować ilość materiału "
+"używanego do wydruku mostu i poprawić jego stabilność.\n"
+"\n"
+"Rzeczywisty przepływ materiału dla mostu oblicza się, mnożąc tę wartość "
+"przez stosunek przepływu filamentu oraz (jeśli ustawiono) przez stosunek "
+"przepływu obiektu."
 
 msgid "Internal bridge flow ratio"
 msgstr "Współczynnik przepływu dla wewnętrznych mostów"
@@ -10008,6 +10078,13 @@ msgid ""
 "with the bridge flow ratio, the filament flow ratio, and if set, the "
 "object's flow ratio."
 msgstr ""
+"Ta wartość reguluje grubość wewnętrznej warstwy mostu. Jest to pierwsza "
+"warstwa nad rzadkim wypełnieniem. Nieznacznie zmniejsz tę wartość (na "
+"przykład 0.9), aby poprawić jakość powierzchni nad rzadkim wypełnieniem.\n"
+"\n"
+"Rzeczywisty przepływ wewnętrz mostu oblicza się, mnożąc tę wartość przez "
+"współczynnik przepływu mostu, współczynnik przepływu filamentu oraz (jeśli "
+"jest ustawiony) współczynnik przepływu obiektu."
 
 msgid "Top surface flow ratio"
 msgstr "Współczynnik przepływu górnej powierzchni"
@@ -10019,6 +10096,13 @@ msgid ""
 "The actual top surface flow used is calculated by multiplying this value "
 "with the filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
+"Ten współczynnik wpływa na ilość materiału dla górnego pełnego wypełnienia. "
+"Możesz go nieznacznie zmniejszyć, aby uzyskać gładkie wykończenie "
+"powierzchni.\n"
+"\n"
+"Rzeczywisty przepływ górnej powierzchni oblicza się, mnożąc tę wartość przez "
+"współczynnik przepływu filamentu oraz (jeśli jest ustawiony) przez "
+"współczynnik przepływu obiektu."
 
 msgid "Bottom surface flow ratio"
 msgstr "Współczynnik przepływu dolnej powierzchni"
@@ -10029,6 +10113,11 @@ msgid ""
 "The actual bottom solid infill flow used is calculated by multiplying this "
 "value with the filament flow ratio, and if set, the object's flow ratio."
 msgstr ""
+"Ten współczynnik wpływa na ilość materiału dla dolnego pełnego wypełnienia.\n"
+"\n"
+"Rzeczywisty przepływ dolnego wypełnienia stałego oblicza się, mnożąc tę "
+"wartość przez współczynnik przepływu filamentu oraz (jeśli jest ustawiony) "
+"przez współczynnik przepływu obiektu."
 
 msgid "Precise wall"
 msgstr "Ściany o wysokiej precyzji"
@@ -10099,7 +10188,7 @@ msgstr ""
 "można zakotwiczyć mostów. "
 
 msgid "Reverse on even"
-msgstr ""
+msgstr "Odwróć na parzystych"
 
 msgid "Overhang reversal"
 msgstr "Przeciwny kierunek przy nawisach"
@@ -10112,6 +10201,12 @@ msgid ""
 "This setting can also help reduce part warping due to the reduction of "
 "stresses in the part walls."
 msgstr ""
+"Wydrukuj obwody, które mają swoją część nad nawisem, w przeciwnym kierunku "
+"na warstwach parzystych. Taki naprzemienny wzór może znacznie poprawić "
+"jakość wydruków z dużymi nawisami.\n"
+"\n"
+"Ten parametr może także pomóc w zmniejszeniu odkształceń elementu, ponieważ "
+"redukuje napięcia w ściankach wydruku."
 
 msgid "Reverse only internal perimeters"
 msgstr "Przeciwny kierunek tylko dla wewnętrznych obrysów"
@@ -10130,6 +10225,20 @@ msgid ""
 "Reverse Threshold to 0 so that all internal walls print in alternating "
 "directions on even layers irrespective of their overhang degree."
 msgstr ""
+"Zastosuj logikę odwracania obwodów tylko do obwodów wewnętrznych.\n"
+"\n"
+"Ten parametr znacznie redukuje napięcia działające na elementy, ponieważ są "
+"one teraz rozłożone w różnych kierunkach. Powinno to zmniejszyć "
+"odkształcenia elementów, zachowując jednocześnie jakość zewnętrznych ścian. "
+"Funkcja ta może być szczególnie przydatna dla materiałów podatnych na "
+"odkształcenia, takich jak ABS/ASA, a także dla elastycznych filamentów, "
+"takich jak TPU i Silk PLA. Może również pomóc w redukcji odkształceń w "
+"podpartych obszarach.\n"
+"\n"
+"Aby ten parametr był jak najskuteczniejszy, zaleca się ustawienie progu "
+"odwrócenia na 0, aby wszystkie wewnętrzne ściany były drukowane w "
+"naprzemiennych kierunkach na warstwach parzystych, niezależnie od ich "
+"stopnia nawisu."
 
 msgid "Bridge counterbore holes"
 msgstr "Mostek dla fazowanych otworów"
@@ -10166,6 +10275,9 @@ msgid ""
 "useful. Can be a % of the perimeter width.\n"
 "Value 0 enables reversal on every even layers regardless."
 msgstr ""
+"Liczba milimetrów, które musi wynosić nawis, aby odwrócenie było uważane za "
+"użyteczne. Może być procentem szerokości obwodu.\n"
+"Wartość 0 aktywuje odwrócenie na każdej parzystej warstwie."
 
 msgid "Classic mode"
 msgstr "Tryb klasyczny"
@@ -10202,6 +10314,23 @@ msgid ""
 "overhanging, with no wall supporting them from underneath, the 100% overhang "
 "speed will be applied."
 msgstr ""
+"Włącz tę opcję, aby spowolnić drukowanie w obszarach, gdzie obwody mogą się "
+"unosić do góry. Na przykład dodatkowe spowolnienie będzie stosowane podczas "
+"drukowania nawisów na ostrych krawędziach, takich jak przód Benchy, co "
+"zmniejszy podwijanie (Curling), które kumuluje się w kolejnych warstwach.\n"
+"\n"
+"Ogólnie zaleca się, aby ta opcja była włączona, chyba że chłodzenie Twojej "
+"drukarki jest wystarczająco mocne lub prędkość druku jest wystarczająco "
+"wolna, aby to zjawisko nie występowało. Jeśli drukujesz zewnętrzny obwód z "
+"wysoką prędkością, ten parametr może wprowadzać niewielkie artefakty podczas "
+"spowolnień z powodu dużej zmienności prędkości druku. Jeśli zauważysz "
+"artefakty, upewnij się, że Twoje dostosowanie ciśnienia (PA) jest prawidłowo "
+"skalibrowane.\n"
+"\n"
+"Uwaga: Gdy ta opcja jest włączona, obwody nawisów traktowane są jak nawis, "
+"co oznacza, że prędkość dla nawisów jest stosowana nawet jeśli unoszący się "
+"obwód jest częścią mostu. Na przykład, gdy obwody są w 100% nawisające, bez "
+"żadnej podpory pod nimi, zastosowana zostanie prędkość dla nawisu 100%."
 
 msgid "mm/s or %"
 msgstr "mm/s lub %"
@@ -10228,6 +10357,8 @@ msgid ""
 "Speed of internal bridges. If the value is expressed as a percentage, it "
 "will be calculated based on the bridge_speed. Default value is 150%."
 msgstr ""
+"Prędkość wewnętrznych mostów. Jeśli wartość jest wyrażona w procentach, "
+"będzie obliczana na podstawie prędkości mostu. Wartość domyślna wynosi 150%."
 
 msgid "Brim width"
 msgstr "Szerokość Brimu"
@@ -10427,7 +10558,7 @@ msgstr ""
 "użycie tej funkcji. Jednak rozważ jej wyłączenie, jeśli używasz dużych dysz."
 
 msgid "Filter out small internal bridges (beta)"
-msgstr ""
+msgstr "Filtruj małe mosty wewnętrzne (beta)"
 
 msgid ""
 "This option can help reducing pillowing on top surfaces in heavily slanted "
@@ -10457,9 +10588,36 @@ msgid ""
 "overhang. This option is useful for heavily slanted top surface models. "
 "However, in most cases it creates too many unnecessary bridges."
 msgstr ""
+"Ta opcja może pomóc w redukcji efektu 'pillowingu' na górnych powierzchniach "
+"w mocno nachylonych lub zakrzywionych modelach.\n"
+"\n"
+"Domyślnie, małe wewnętrzne mosty są filtrowane, a wewnętrzne pełne "
+"wypełnienie jest drukowane bezpośrednio na rzadkim wypełnieniu. To "
+"rozwiązanie sprawdza się w większości przypadków, przyspieszając drukowanie "
+"bez zbytniego kompromisu w jakości górnej powierzchni.\n"
+"\n"
+"Jednak w mocno nachylonych lub zakrzywionych modelach, szczególnie przy zbyt "
+"niskiej gęstości rzadkiego wypełnienia, może to prowadzić do odkształcania "
+"się niepodpartej części wypełnienia, powodując 'pillowing'.\n"
+"\n"
+"Wyłączenie tej opcji spowoduje wydrukowanie warstwy mostu wewnętrznego nad "
+"niepodpartym wewnętrznym pełnym wypełnieniem. Opcje poniżej kontrolują "
+"stopień filtrowania, czyli ilość stworzonych wewnętrznych mostów.\n"
+"\n"
+"Filtruj – włącz tę opcję. Jest to domyślne zachowanie, które dobrze sprawdza "
+"się w większości przypadków.\n"
+"\n"
+"Ograniczone filtrowanie - tworzy wewnętrzne mosty na mocno pochylonych "
+"powierzchniach, jednocześnie unikając tworzenia niepotrzebnych wewnętrznych "
+"mostów. Działa to dobrze w przypadku większości trudnych modeli.\n"
+"\n"
+"Brak filtrowania – tworzy wewnętrzne mosty na każdym potencjalnym "
+"wewnętrznym nawisie. Ta opcja jest przydatna dla modeli z mocno nachyloną "
+"górną powierzchnią. Jednak w większości przypadków niepotrzebnie tworzy ich "
+"zbyt wiele."
 
 msgid "Filter"
-msgstr ""
+msgstr "Filtr"
 
 msgid "Limited filtering"
 msgstr "Ograniczona filtracja"
@@ -10712,6 +10870,14 @@ msgid ""
 "\n"
 "This option will be disabled if spiral vase mode is enabled."
 msgstr ""
+"Kierunek, w którym wytłaczane są pętle ścian, patrząc z góry.\n"
+"\n"
+"Domyślnie wszystkie ściany są wytłaczane w kierunku przeciwnym do ruchu "
+"wskazówek zegara, chyba że opcja Odwróć na parzystych jest włączona. "
+"Ustawienie tej opcji na coś innego niż Auto wymusi kierunek ściany, "
+"niezależnie od ustawienia Odwróć na parzystych.\n"
+"\n"
+"Ta opcja będzie wyłączona, jeśli tryb Wazy jest włączony."
 
 msgid "Counter clockwise"
 msgstr "Przeciwnie"
@@ -10854,6 +11020,14 @@ msgid ""
 "The final object flow ratio is this value multiplied by the filament flow "
 "ratio."
 msgstr ""
+"Materiał może mieć zmiany objętości po przejściu między stanem ciekłym a "
+"stanem krystalicznym. Ta opcja zmienia proporcjonalnie cały przepływ "
+"wytłaczania filamentu w gcode. Zalecany zakres wartości to od 0,95 do 1,05. "
+"Może warto dostosować tę wartość, aby uzyskać ładną, gładką powierzchnię, "
+"gdy występuje niewielkie przepełnienie lub niedobór.\n"
+"\n"
+"Ostateczny współczynnik przepływu dla obiektu to ta wartość pomnożona przez "
+"współczynnik przepływu filamentu."
 
 msgid "Enable pressure advance"
 msgstr "Włącz wzrost ciśnienia (PA)"
@@ -10872,7 +11046,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr "Włącz adaptacyjny wzrost ciśnienia (beta)"
 
-#, c-format, boost-format
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10894,8 +11068,8 @@ msgid ""
 "\n"
 msgstr ""
 "Wraz ze wzrostem prędkości druku zaobserwowano, że efektywna wartość PA "
-"zazwyczaj maleje. Oznacza to, że pojedyncza wartość PA nie jest w "
-"100% optymalna dla wszystkich elementów i zwykle stosowana jest wartość "
+"zazwyczaj maleje. Oznacza to, że pojedyncza wartość PA nie jest w 100% "
+"optymalna dla wszystkich elementów i zwykle stosowana jest wartość "
 "kompromisowa, która nie powoduje zbyt dużego \"wypuklenia\" na elementach "
 "drukowanych wolniej, a jednocześnie nie powoduje przerw na elementach "
 "drukowanych szybciej.\n"
@@ -10913,6 +11087,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr "Adaptacyjny pomiar ciśnienia (beta)"
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -11099,6 +11274,10 @@ msgid ""
 "single-extruder multi-material machines. For tool changers or multi-tool "
 "machines, it's typically 0. For statistics only"
 msgstr ""
+"Czas na załadowanie nowego filamentu przy jego zmianie. Zwykle dotyczy to "
+"maszyn wielomateriałowych z jednym ekstruderem. Dla maszyn z wymiennym "
+"narzędziem lub maszyn wielonarzędziowych zazwyczaj wynosi 0. Tylko do "
+"statystyk."
 
 msgid "Filament unload time"
 msgstr "Czas rozładowania filamentu"
@@ -11108,15 +11287,22 @@ msgid ""
 "for single-extruder multi-material machines. For tool changers or multi-tool "
 "machines, it's typically 0. For statistics only"
 msgstr ""
+"Czas na rozładowanie starego filamentu przy jego zmianie. Zwykle dotyczy to "
+"maszyn wielomateriałowych z jednym ekstruderem. Dla maszyn z wymiennym "
+"narzędziem lub maszyn wielonarzędziowych zazwyczaj wynosi 0. Tylko do "
+"statystyk."
 
 msgid "Tool change time"
-msgstr ""
+msgstr "Czas zmiany narzędzia"
 
 msgid ""
 "Time taken to switch tools. It's usually applicable for tool changers or "
 "multi-tool machines. For single-extruder multi-material machines, it's "
 "typically 0. For statistics only"
 msgstr ""
+"Czas potrzebny na zmianę narzędzia. Zwykle dotyczy to maszyn z wymiennym "
+"narzędziem lub maszyn wielonarzędziowych. Dla maszyn wielomateriałowych z "
+"jednym ekstruderem zazwyczaj wynosi 0. Tylko do statystyk."
 
 msgid ""
 "Filament diameter is used to calculate extrusion in gcode, so it's important "
@@ -11146,7 +11332,7 @@ msgstr ""
 "średnica_filamentu = sqrt( (4 * współczynnik_przepływu_granulatu) / PI )"
 
 msgid "Shrinkage (XY)"
-msgstr ""
+msgstr "Skurcz (XY)"
 
 #, no-c-format, no-boost-format
 msgid ""
@@ -11163,7 +11349,7 @@ msgstr ""
 "ponieważ ta kompensacja jest wykonywana po przeprowadzeniu kontroli."
 
 msgid "Shrinkage (Z)"
-msgstr ""
+msgstr "Skurcz (Z)"
 
 #, no-c-format, no-boost-format
 msgid ""
@@ -11171,6 +11357,9 @@ msgid ""
 "if you measure 94mm instead of 100mm). The part will be scaled in Z to "
 "compensate."
 msgstr ""
+"Wprowadź procent skurczu, jaki filament uzyska po schłodzeniu (94%, jeśli "
+"mierzysz 94 mm zamiast 100 mm). Część będzie skalowana w osi Z, aby to "
+"zrekompensować."
 
 msgid "Loading speed"
 msgstr "Prędkość ładowania"
@@ -11735,6 +11924,9 @@ msgid ""
 "(in mm). This setting applies to top, bottom and solid infill and, if using "
 "the classic perimeter generator, to wall gap fill. "
 msgstr ""
+"Nie drukuj wypełnienia szczelin, których długość jest mniejsza niż określony "
+"próg (w mm). Ustawienie to dotyczy górnego i dolnego pełnego wypełnienia "
+"oraz, gdy używany jest klasyczny generator ścian."
 
 msgid ""
 "Speed of gap infill. Gap usually has irregular line width and should be "
@@ -12005,7 +12197,7 @@ msgstr ""
 "warstwy."
 
 msgid "Infill combination - Max layer height"
-msgstr ""
+msgstr "Kombinacja wypełnienia - Maks. wysokość warstwy"
 
 msgid ""
 "Maximum layer height for the combined sparse infill. \n"
@@ -12019,6 +12211,18 @@ msgid ""
 "Use either absolute mm values (eg. 0.32mm for a 0.4mm nozzle) or % values "
 "(eg 80%). This value must not be larger than the nozzle diameter."
 msgstr ""
+"Maksymalna wysokość warstwy dla kombinacji łączenia rzadkiego wypełnienia.\n"
+"\n"
+"Ustaw ją na 0 lub 100%, aby użyć średnicy dyszy (dla maksymalnej redukcji "
+"czasu druku) lub na wartość ~80%, aby zmaksymalizować wytrzymałość rzadkiego "
+"wypełnienia.\n"
+"\n"
+"Liczba warstw, w których wypełnienie jest łączone, jest obliczana przez "
+"podzielenie tej wartości przez wysokość warstwy i zaokrąglenie w dół do "
+"najbliższej liczby całkowitej.\n"
+"\n"
+"Użyj wartości absolutnych w mm (np. 0,32 mm dla dyszy 0,4 mm) lub wartości "
+"procentowych (np. 80%). Ta wartość nie może być większa niż średnica dyszy."
 
 msgid "Filament to print internal sparse infill."
 msgstr ""
@@ -13240,12 +13444,15 @@ msgid "Distance from skirt to brim or object"
 msgstr "Odległość Skirtu do Brimu albo od obiektu"
 
 msgid "Skirt start point"
-msgstr ""
+msgstr "Punkt początkowy Skirtu"
 
 msgid ""
 "Angle from the object center to skirt start point. Zero is the most right "
 "position, counter clockwise is positive angle."
 msgstr ""
+"Kąt między środkiem obiektu a punktem początkowym Skirtu. Zero to pozycja "
+"najbardziej po prawej stronie, a w kieruneku przeciwnym do ruchu wskazówek "
+"zegara to kąt dodatni."
 
 msgid "Skirt height"
 msgstr "Wysokość Skirtu"
@@ -13267,6 +13474,17 @@ msgid ""
 "distance from the object. Therefore, if brims are active it may intersect "
 "with them. To avoid this, increase the skirt distance value.\n"
 msgstr ""
+"Draft Shield (\"ochrona przed przeciągiem\")jest przydatna do ochrony "
+"wydruku z ABS lub ASA przed wypaczaniem i oderwaniem się od stołu drukarki z "
+"powodu podmuchów powietrza. Zazwyczaj jest to potrzebne tylko w przypadku "
+"drukarek otwartych, czyli bez obudowy.\n"
+"\n"
+"Włączony = skirt ma wysokość równą najwyższemu wydrukowanemu obiektowi. W "
+"przeciwnym razie stosuje się \"wysokość obramowania\".\n"
+"Uwaga: Aktywując funkcję Draft Shield, Skirt zostanie wydrukowany w takiej "
+"odległości od obiektu jak określono w odstęp Skirtu od obiektu. Jeśli w tym "
+"samym czasie Brim jest też aktywny, może dojść do jego przecięcia się ze "
+"Skirt-em. Aby temu zapobiec, zwiększ wartość odległości od Skirtu\n"
 
 msgid "Disabled"
 msgstr "Wyłączony"
@@ -13275,18 +13493,20 @@ msgid "Enabled"
 msgstr "Włączony"
 
 msgid "Skirt type"
-msgstr ""
+msgstr "Rodzaj Skirtu"
 
 msgid ""
 "Combined - single skirt for all objects, Per object - individual object "
 "skirt."
 msgstr ""
+"Połączony - pojedynczy skirt dla wszystkich obiektów.\n"
+"Dla obiektu - indywidualny skirt dla każdego obiektu."
 
 msgid "Combined"
-msgstr ""
+msgstr "Połączony"
 
 msgid "Per object"
-msgstr ""
+msgstr "Dla obiektu"
 
 msgid "Skirt loops"
 msgstr "Ilość pętli Skirtu"
@@ -13314,6 +13534,13 @@ msgid ""
 "Final number of loops is not taling into account whli arranging or "
 "validating objects distance. Increase loop number in such case. "
 msgstr ""
+"Minimalna długość ekstruzji filamentu w mm podczas drukowania skirtu. Zero "
+"oznacza, że ta funkcja jest wyłączona.\n"
+"\n"
+"Użycie wartości większej od zera jest przydatne, jeśli drukarka jest "
+"skonfigurowana do drukowania bez linii wstępnej. Ostateczna liczba pętli nie "
+"uwzględnia odległości między obiektami podczas ich układania lub "
+"weryfikacji. W takim przypadku zwiększ liczbę pętli."
 
 msgid ""
 "The printing speed in exported gcode will be slowed down, when the estimated "
@@ -13767,7 +13994,7 @@ msgstr ""
 "płaskimi nawisami."
 
 msgid "Default (Grid/Organic"
-msgstr ""
+msgstr "Domyślne (Kratka/Organiczne)"
 
 msgid "Snug"
 msgstr "Przylegający"
@@ -13953,6 +14180,15 @@ msgid ""
 "either via macros or natively and is usually used when an active chamber "
 "heater is installed."
 msgstr ""
+"Włącz tę opcję, aby automatycznie kontrolować temperaturę komory. Ta opcja "
+"aktywuje wysyłanie polecenia M191 przed \"machine_start_gcode\", które "
+"ustawia temperaturę komory i czeka, aż zostanie osiągnięta. Dodatkowo na "
+"końcu druku wysyła polecenie M141, aby wyłączyć podgrzewacz komory, jeśli "
+"jest obecny.\n"
+"\n"
+"Ta opcja opiera się na poleceniach M191 i M141 wspieranych przez "
+"oprogramowanie układowe, czy to za pomocą makr, czy natywnie i jest używana, "
+"gdy zainstalowany jest aktywna podgrzewacz."
 
 msgid "Chamber temperature"
 msgstr "Temperatura komory"
@@ -13976,6 +14212,24 @@ msgid ""
 "desire to handle heat soaking in the print start macro if no active chamber "
 "heater is installed."
 msgstr ""
+"Dla materiałów wysokotemperaturowych, takich jak ABS, ASA, PC i PA, wyższa "
+"temperatura komory może pomóc w tłumieniu lub redukcji odkształceń i "
+"potencjalnie prowadzić do wyższej siły połączeń międzywarstwowych. Jednak "
+"jednocześnie wyższa temperatura komory obniża efektywność filtracji "
+"powietrza dla ABS i ASA.\n"
+"\n"
+"Dla PLA, PETG, TPU, PVA i innych materiałów niskotemperaturowych ta opcja "
+"powinna być wyłączona (ustawiona na 0), ponieważ temperatura komory powinna "
+"być niska, aby uniknąć zatykania ekstrudera spowodowanego zmiękczeniem "
+"materiału w miejscu przejścia ciepła.\n"
+"\n"
+"Jeśli włączona, ten parametr ustawia także zmienną gcode o nazwie "
+"chamber_temperature, która może być użyta do przekazania żądanej temperatury "
+"komory do makra rozpoczynającego drukowanie, lub makra utrzymywania ciepła, "
+"na przykład: PRINT_START (inne zmienne) CHAMBER_TEMP=[chamber_temperature]. "
+"Może to być przydatne, jeśli twoja drukarka nie obsługuje poleceń M141/M191 "
+"lub jeśli chcesz zarządzać utrzymywaniem ciepła w makrze rozpoczynającym "
+"drukowanie, jeśli nie jest zainstalowany aktywna podgrzewacz komory."
 
 msgid "Nozzle temperature for layers after the initial one"
 msgstr "Temperatura dyszy dla warstw po początkowej"
@@ -16209,7 +16463,7 @@ msgid "Process presets(.zip)"
 msgstr "Profile procesu (.zip)"
 
 msgid "initialize fail"
-msgstr "Błąd inicjalizacji"
+msgstr "błąd inicjalizacji"
 
 msgid "add file fail"
 msgstr "Dodawanie pliku nie powiodło się"
@@ -16218,7 +16472,7 @@ msgid "add bundle structure file fail"
 msgstr "Błąd dodawania pliku struktury pakietu konfiguracji"
 
 msgid "finalize fail"
-msgstr "Finalizacja nie powiodła się"
+msgstr "finalizacja nie powiodła się"
 
 msgid "open zip written fail"
 msgstr "błąd zapisu ZIP"
@@ -17297,6 +17551,9 @@ msgstr ""
 "takimi jak ABS, odpowiednie zwiększenie temperatury podgrzewanej płyty może "
 "zmniejszyć prawdopodobieństwo odkształceń."
 
+#~ msgid "Cool Plate"
+#~ msgstr "Cool Plate / PLA Plate"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Przeciwny kierunek na nieparzystych warstwach"
 

localization/i18n/pt_BR/OrcaSlicer_pt_BR.po

@@ -2,7 +2,7 @@
 msgid ""
 msgstr ""
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: 2024-06-01 21:51-0300\n"
 "Last-Translator: \n"
 "Language-Team: Portuguese, Brazilian\n"
@@ -5911,6 +5911,9 @@ msgstr "Bloquear a mesa atual"
 msgid "Edit current plate name"
 msgstr "Editar nome da mesa atual"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Personalizar a mesa atual"
 
@@ -7878,6 +7881,14 @@ msgstr ""
 "Temperatura da mesa quando a cool plate (mesa fria) está instalada. Valor 0 "
 "significa que o filamento não suporta impressão na cool plate"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Mesa de engenharia"
 
@@ -9739,6 +9750,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9773,6 +9789,11 @@ msgstr ""
 "Temperatura da mesa na primeira camada. O valor 0 significa que o filamento "
 "não suporta a impressão na Cool Plate (Mesa Fria)"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9797,12 +9818,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Tipos de mesa suportadas pela impressora"
 
-msgid "Cool Plate"
-msgstr "Mesa Fria"
+msgid "Smooth Cool Plate"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Engenharia Plate"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Sequência de impressão da primeira camada"
 
@@ -10832,7 +10859,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
-#, c-format, boost-format
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10857,6 +10884,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -17117,6 +17145,9 @@ msgstr ""
 "aumentar adequadamente a temperatura da mesa aquecida pode reduzir a "
 "probabilidade de empenamento?"
 
+#~ msgid "Cool Plate"
+#~ msgstr "Mesa Fria"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Inverter em ímpares"
 

localization/i18n/sv/OrcaSlicer_sv.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -5766,6 +5766,9 @@ msgstr ""
 msgid "Edit current plate name"
 msgstr ""
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr ""
 
@@ -7676,6 +7679,14 @@ msgstr ""
 "Detta är byggplattans temperatur när Cool Plate är installerad. Värdet 0 "
 "betyder att filamentet inte stöder utskrift på Cool Plate."
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Engineering plate"
 
@@ -9449,6 +9460,11 @@ msgstr ""
 msgid "°C"
 msgstr "° C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9483,6 +9499,11 @@ msgstr ""
 "Detta är byggplattans temperatur för första lager. Värdet 0 betyder att "
 "filamentet inte stöder utskrift på Cool Plate."
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9507,12 +9528,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Byggplattans typ stöds av skrivaren"
 
-msgid "Cool Plate"
-msgstr "Cool Plate"
+msgid "Smooth Cool Plate"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Engineering Plate"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Första lagrets utskrifts ordning"
 
@@ -10421,7 +10448,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
-#, c-format, boost-format
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10446,6 +10473,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -16145,6 +16173,9 @@ msgstr ""
 "ABS, kan en lämplig ökning av värmebäddens temperatur minska sannolikheten "
 "för vridning."
 
+#~ msgid "Cool Plate"
+#~ msgstr "Cool Plate"
+
 #~ msgid ""
 #~ "While printing by Object, the extruder may collide skirt.\n"
 #~ "Thus, reset the skirt layer to 1 to avoid that."

localization/i18n/uk/OrcaSlicer_uk.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: 2024-06-30 23:05+0300\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -5910,6 +5910,9 @@ msgstr "Блокування поточної пластини"
 msgid "Edit current plate name"
 msgstr "Редагувати поточну назву пластини"
 
+msgid "Move plate to the front"
+msgstr ""
+
 msgid "Customize current plate"
 msgstr "Налаштувати поточну пластину"
 
@@ -7868,6 +7871,14 @@ msgstr ""
 "філамент\n"
 "не підтримує друк на Холодному столі"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid "Engineering plate"
 msgstr "Інженерний стіл"
 
@@ -9737,6 +9748,11 @@ msgstr ""
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9771,6 +9787,11 @@ msgstr ""
 "Температура першого шару. Значення 0 означає, що філамент не підтримує друк "
 "на холодному столі"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9795,12 +9816,18 @@ msgstr ""
 msgid "Bed types supported by the printer"
 msgstr "Типи ліжок, які підтримує принтер"
 
-msgid "Cool Plate"
-msgstr "Холодна пластина"
+msgid "Smooth Cool Plate"
+msgstr ""
 
 msgid "Engineering Plate"
 msgstr "Інженерна пластина"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "Послідовність друку першого шару"
 
@@ -10810,7 +10837,7 @@ msgstr ""
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
-#, c-format, boost-format
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10835,6 +10862,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -17065,6 +17093,9 @@ msgstr ""
 "ABS, відповідне підвищення температури гарячого ліжка може зменшити "
 "ймовірність деформації."
 
+#~ msgid "Cool Plate"
+#~ msgstr "Холодна пластина"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "Зворотній на непарних"
 

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: 2024-07-28 07:12+0000\n"
 "Last-Translator: Handle <mail@bysb.net>\n"
 "Language-Team: \n"
@@ -5652,6 +5652,9 @@ msgstr "锁定当前板"
 msgid "Edit current plate name"
 msgstr "编辑当前盘名"
 
+msgid "Move plate to the front"
+msgstr "将当前板移到最前面"
+
 msgid "Customize current plate"
 msgstr "自定义当前板"
 
@@ -7443,7 +7446,7 @@ msgid "Recommended nozzle temperature range of this filament. 0 means no set"
 msgstr "该材料的建议喷嘴温度范围。0表示未设置"
 
 msgid "Flow ratio and Pressure Advance"
-msgstr ""
+msgstr "流量和压力提前"
 
 msgid "Print chamber temperature"
 msgstr "打印仓温度"
@@ -7465,6 +7468,15 @@ msgid ""
 "does not support to print on the Cool Plate"
 msgstr "安装低温打印热床时的热床温度。0值表示这个耗材丝不支持低温打印热床"
 
+msgid "Textured Cool plate"
+msgstr "纹理低温打印热床"
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+"安装纹理低温打印热床时的热床温度。0值表示这个耗材丝不支持纹理低温打印热床"
+
 msgid "Engineering plate"
 msgstr "工程材料热床"
 
@@ -9196,6 +9208,11 @@ msgstr "非首层热床温度。0值表示这个耗材丝不支持低温打印
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr "非首层热床温度。0值表示这个耗材丝不支持纹理低温打印热床"
+
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
 "filament does not support to print on the Engineering Plate"
@@ -9222,6 +9239,11 @@ msgid ""
 "support to print on the Cool Plate"
 msgstr "首层热床温度。0值表示这个耗材丝不支持低温打印热床"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr "首层热床温度。0值表示这个耗材丝不支持纹理低温打印热床"
+
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
 "support to print on the Engineering Plate"
@@ -9240,12 +9262,18 @@ msgstr "首层热床温度。0值表示这个耗材丝不支持纹理PEI热床"
 msgid "Bed types supported by the printer"
 msgstr "打印机所支持的热床类型"
 
-msgid "Cool Plate"
-msgstr "低温打印热床"
+msgid "Smooth Cool Plate"
+msgstr "光滑的低温打印床"
 
 msgid "Engineering Plate"
 msgstr "工程材料热床"
 
+msgid "Smooth High Temp Plate"
+msgstr "光滑高温打印热床"
+
+msgid "Textured Cool Plate"
+msgstr "纹理的低温打印床"
+
 msgid "First layer print sequence"
 msgstr "第一层打印顺序"
 
@@ -9552,8 +9580,9 @@ msgid ""
 "Number of mm the overhang need to be for the reversal to be considered "
 "useful. Can be a % of the perimeter width.\n"
 "Value 0 enables reversal on every even layers regardless."
-msgstr "判定悬垂反转需要的值（毫米），可以是线宽的百分比。"
-"0值表示在每个偶数层上都启用反转。"
+msgstr ""
+"判定悬垂反转需要的值（毫米），可以是线宽的百分比。0值表示在每个偶数层上都启用"
+"反转。"
 
 msgid "Classic mode"
 msgstr "经典模式"
@@ -9797,7 +9826,7 @@ msgstr ""
 "虑关闭它。"
 
 msgid "Filter out small internal bridges (beta)"
-msgstr ""
+msgstr "过滤细微内部桥接（试验）"
 
 msgid ""
 "This option can help reducing pillowing on top surfaces in heavily slanted "
@@ -10187,9 +10216,9 @@ msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)"
 msgstr "压力提前(Klipper)或者线性提前(Marlin)"
 
 msgid "Enable adaptive pressure advance (beta)"
-msgstr ""
+msgstr "启用自适应压力提前（试验）"
 
-#, c-format, boost-format
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10212,8 +10241,9 @@ msgid ""
 msgstr ""
 
 msgid "Adaptive pressure advance measurements (beta)"
-msgstr ""
+msgstr "自适应压力提前参数（试验）"
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -10245,7 +10275,7 @@ msgid ""
 msgstr ""
 
 msgid "Enable adaptive pressure advance for overhangs (beta)"
-msgstr ""
+msgstr "为悬垂启用自适应压力提前（试验）"
 
 msgid ""
 "Enable adaptive PA for overhangs as well as when flow changes within the "
@@ -10255,7 +10285,7 @@ msgid ""
 msgstr ""
 
 msgid "Pressure advance for bridges"
-msgstr ""
+msgstr "为搭桥启用压力提前"
 
 msgid ""
 "Pressure advance value for bridges. Set to 0 to disable. \n"
@@ -10365,7 +10395,7 @@ msgid ""
 msgstr ""
 
 msgid "Tool change time"
-msgstr ""
+msgstr "换工具头所需时间"
 
 msgid ""
 "Time taken to switch tools. It's usually applicable for tool changers or "
@@ -10392,7 +10422,7 @@ msgid ""
 msgstr ""
 
 msgid "Shrinkage (XY)"
-msgstr ""
+msgstr "收缩率（XY）"
 
 #, no-c-format, no-boost-format
 msgid ""
@@ -10408,7 +10438,7 @@ msgstr ""
 "请确保物体之间有足够的间距，因为补偿是在边界检查之后进行"
 
 msgid "Shrinkage (Z)"
-msgstr ""
+msgstr "收缩率（Z）"
 
 #, no-c-format, no-boost-format
 msgid ""
@@ -11218,7 +11248,7 @@ msgid ""
 msgstr ""
 
 msgid "Use beam interlocking"
-msgstr ""
+msgstr "启用互锁梁"
 
 msgid ""
 "Generate interlocking beam structure at the locations where different "
@@ -11227,19 +11257,19 @@ msgid ""
 msgstr ""
 
 msgid "Interlocking beam width"
-msgstr ""
+msgstr "互锁梁宽度"
 
 msgid "The width of the interlocking structure beams."
-msgstr ""
+msgstr "互锁梁的宽度"
 
 msgid "Interlocking direction"
-msgstr ""
+msgstr "互锁方向"
 
 msgid "Orientation of interlock beams."
-msgstr ""
+msgstr "互锁梁的方向"
 
 msgid "Interlocking beam layers"
-msgstr ""
+msgstr "互锁梁层数"
 
 msgid ""
 "The height of the beams of the interlocking structure, measured in number of "
@@ -11255,12 +11285,12 @@ msgid ""
 msgstr ""
 
 msgid "Interlocking boundary avoidance"
-msgstr ""
+msgstr "互锁与边界的留白量"
 
 msgid ""
 "The distance from the outside of a model where interlocking structures will "
 "not be generated, measured in cells."
-msgstr ""
+msgstr "模型边框与互锁结构的距离，以单元格为单位。"
 
 msgid "Ironing Type"
 msgstr "熨烫类型"
@@ -11911,7 +11941,7 @@ msgid "Spiral"
 msgstr "螺旋"
 
 msgid "Traveling angle"
-msgstr ""
+msgstr "空驶抬高角度"
 
 msgid ""
 "Traveling angle for Slope and Spiral Z hop type. Setting it to 90° results "
@@ -13107,7 +13137,7 @@ msgid ""
 msgstr ""
 
 msgid "Idle temperature"
-msgstr ""
+msgstr "待机温度"
 
 msgid ""
 "Nozzle temperature when the tool is currently not used in multi-tool setups."
@@ -15863,6 +15893,9 @@ msgstr ""
 "避免翘曲\n"
 "您知道吗？打印ABS这类易翘曲材料时，适当提高热床温度可以降低翘曲的概率。"
 
+#~ msgid "Cool Plate"
+#~ msgstr "低温打印热床"
+
 #~ msgid "Reverse on odd"
 #~ msgstr "反转奇数层悬垂方向"
 

localization/i18n/zh_TW/OrcaSlicer_zh_TW.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-09-11 22:56+0800\n"
+"POT-Creation-Date: 2024-09-25 19:57+0800\n"
 "PO-Revision-Date: 2023-11-06 14:37+0800\n"
 "Last-Translator: ablegods <ablegods@gmail.com>\n"
 "Language-Team: \n"
@@ -5835,6 +5835,9 @@ msgstr "鎖定列印板"
 msgid "Edit current plate name"
 msgstr ""
 
+msgid "Move plate to the front"
+msgstr ""
+
 #, fuzzy
 msgid "Customize current plate"
 msgstr "自訂列印板參數"
@@ -7734,6 +7737,14 @@ msgid ""
 "does not support to print on the Cool Plate"
 msgstr "使用低溫列印板時的熱床溫度。0 值表示這個線材不支援低溫列印板"
 
+msgid "Textured Cool plate"
+msgstr ""
+
+msgid ""
+"Bed temperature when cool plate is installed. Value 0 means the filament "
+"does not support to print on the Textured Cool Plate"
+msgstr ""
+
 #, fuzzy
 msgid "Engineering plate"
 msgstr "工程高溫列印板"
@@ -9532,6 +9543,11 @@ msgstr "除首層外的床溫。0 值表示這個線材不支援低溫列印板"
 msgid "°C"
 msgstr "°C"
 
+msgid ""
+"Bed temperature for layers except the initial one. Value 0 means the "
+"filament does not support to print on the Textured Cool Plate"
+msgstr ""
+
 #, fuzzy
 msgid ""
 "Bed temperature for layers except the initial one. Value 0 means the "
@@ -9562,6 +9578,11 @@ msgid ""
 "support to print on the Cool Plate"
 msgstr "首層熱床溫度。0 值表示這個線材不支援低溫列印板"
 
+msgid ""
+"Bed temperature of the initial layer. Value 0 means the filament does not "
+"support to print on the Textured Cool Plate"
+msgstr ""
+
 #, fuzzy
 msgid ""
 "Bed temperature of the initial layer. Value 0 means the filament does not "
@@ -9584,14 +9605,19 @@ msgstr "首層熱床溫度。0 值表示這個線材不支援金屬紋理 PEI
 msgid "Bed types supported by the printer"
 msgstr "列印設備所支援的列印板類型"
 
-#, fuzzy
-msgid "Cool Plate"
-msgstr "低溫列印板"
+msgid "Smooth Cool Plate"
+msgstr ""
 
 #, fuzzy
 msgid "Engineering Plate"
 msgstr "工程高溫列印板"
 
+msgid "Smooth High Temp Plate"
+msgstr ""
+
+msgid "Textured Cool Plate"
+msgstr ""
+
 msgid "First layer print sequence"
 msgstr "首層列印順序"
 
@@ -10522,7 +10548,7 @@ msgstr "壓力提前（Klipper）或者線性提前（Marlin）"
 msgid "Enable adaptive pressure advance (beta)"
 msgstr ""
 
-#, c-format, boost-format
+#, no-c-format, no-boost-format
 msgid ""
 "With increasing print speeds (and hence increasing volumetric flow through "
 "the nozzle) and increasing accelerations, it has been observed that the "
@@ -10547,6 +10573,7 @@ msgstr ""
 msgid "Adaptive pressure advance measurements (beta)"
 msgstr ""
 
+#, no-c-format, no-boost-format
 msgid ""
 "Add sets of pressure advance (PA) values, the volumetric flow speeds and "
 "accelerations they were measured at, separated by a comma. One set of values "
@@ -16117,6 +16144,10 @@ msgid ""
 "probability of warping."
 msgstr ""
 
+#, fuzzy
+#~ msgid "Cool Plate"
+#~ msgstr "低溫列印板"
+
 #, fuzzy
 #~ msgid "Reverse on odd"
 #~ msgstr "反轉奇數層懸空方向"

resources/images/orca_bed_pct_left.svg

@@ -0,0 +1,98 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   width="24"
+   height="302"
+   viewBox="0 0 24 302"
+   fill="none"
+   version="1.1"
+   id="svg14"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg">
+  <defs
+     id="defs14" />
+  <path
+     d="M 0.36895847,8.2161586 H 20.495973 V 1.5286532 H 20.6431 l 2.53059,1.265626 V 18.028666 H 23.026563 L 20.495973,16.76304 V 11.341161 H 1.6931042 L 0.36895847,8.3724087 Z"
+     id="text18"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="T" />
+  <path
+     d="m 0.95746767,22.325545 q 0,-4.687504 4.41381913,-4.687504 h 7.3563652 q 4.413819,0 4.413819,4.687504 v 3.593752 q 0,4.687505 -4.413819,4.687505 H 11.947877 L 4.812203,20.809918 q -1.2064438,0.218751 -1.2064438,1.515627 v 3.593752 q 0,1.562501 1.7655276,1.562501 h 0.7797747 l 1.3241457,2.968754 v 0.15625 H 5.3712868 q -4.41381913,0 -4.41381913,-4.687505 z m 6.92969593,-1.562502 5.0906044,6.70313 q 1.515411,-0.09375 1.515411,-1.546876 v -3.593752 q 0,-1.562502 -1.765527,-1.562502 z"
+     id="text17"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="e" />
+  <path
+     d="m 0.36895847,36.606806 v -0.156251 l 1.20644393,-2.718752 7.474067,4.843754 7.4593546,-4.843754 1.221156,2.734377 v 0.156251 l -6.282336,3.796877 6.282336,3.781253 v 0.15625 l -1.221156,2.734377 -7.4593546,-4.843753 -7.474067,4.843753 -1.20644393,-2.718752 v -0.15625 L 6.666007,40.419308 Z"
+     id="text16"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="x" />
+  <path
+     d="M 0.36895847,52.747446 H 14.463754 v -4.015628 h 0.147128 l 2.530589,1.265626 v 2.750002 h 5.296583 l 1.324146,2.968752 v 0.15625 h -6.620729 v 4.015628 H 16.994343 L 14.463754,58.62245 V 55.872448 H 1.6931042 L 0.36895847,52.903696 Z"
+     id="text15"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="t" />
+  <path
+     d="m 0.95746767,67.309956 q 0,-4.687505 4.41381913,-4.687505 H 16.405834 l 1.324146,2.968752 v 0.15625 H 5.3712868 q -1.7655276,0 -1.7655276,1.562503 v 3.593752 q 0,1.562501 1.7655276,1.562501 H 16.405834 l 1.324146,2.968753 v 0.15625 H 5.3712868 q -4.41381913,0 -4.41381913,-4.687504 z"
+     id="text14"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="u" />
+  <path
+     d="M 0.36895847,80.278718 H 12.727652 q 4.413819,0 4.413819,4.687504 v 3.906253 h -0.147128 l -2.501164,-1.250001 v -2.656252 q 0,-1.562501 -1.765527,-1.562501 H 1.6931042 L 0.36895847,80.434968 Z"
+     id="text13"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="r" />
+  <path
+     d="m 0.95746767,96.216231 q 0,-4.687503 4.41381913,-4.687503 h 7.3563652 q 4.413819,0 4.413819,4.687503 v 3.593753 q 0,4.687506 -4.413819,4.687506 H 11.947877 L 4.812203,94.700605 q -1.2064438,0.21875 -1.2064438,1.515626 v 3.593753 q 0,1.562506 1.7655276,1.562506 h 0.7797747 l 1.3241457,2.96875 v 0.15625 H 5.3712868 q -4.41381913,0 -4.41381913,-4.687506 z m 6.92969593,-1.562501 5.0906044,6.70313 q 1.515411,-0.0937 1.515411,-1.546876 v -3.593753 q 0,-1.562501 -1.765527,-1.562501 z"
+     id="text12"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="e" />
+  <path
+     d="m 0.95746767,113.87248 q 0,-4.6875 4.41381913,-4.6875 h 7.3563652 q 4.413819,0 4.413819,4.6875 v 3.59376 q 0,1.0625 -0.456095,1.5625 h 5.752678 l 1.324146,2.96875 v 0.15625 H 5.3712868 q -4.41381913,0 -4.41381913,-4.6875 z m 2.64829153,0 v 3.59376 q 0,1.5625 1.7655276,1.5625 h 7.3563652 q 1.765527,0 1.765527,-1.5625 v -3.59376 q 0,-1.5625 -1.765527,-1.5625 H 5.3712868 q -1.7655276,0 -1.7655276,1.5625 z"
+     id="text11"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="d" />
+  <path
+     d="m 0.95746767,146.37253 q 0,-5.46876 5.14945553,-5.46876 H 18.024235 q 5.149455,0 5.149455,5.46876 v 4.84376 q 0,5.46875 -5.149455,5.46875 h -1.618401 l -1.324145,-2.96875 v -0.15625 h 2.942546 q 2.501164,0 2.501164,-2.34375 v -4.84376 q 0,-2.34376 -2.501164,-2.34376 H 6.1069232 q -2.501164,0 -2.501164,2.34376 v 4.84376 q 0,2.34375 2.501164,2.34375 h 1.6184004 l 1.3241458,2.96875 v 0.15625 H 6.1069232 q -5.14945553,0 -5.14945553,-5.46875 z"
+     id="text10"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="C" />
+  <path
+     d="m 3.6057592,166.84129 v 3.59376 q 0,1.5625 1.7655276,1.5625 h 7.3563652 q 1.765527,0 1.765527,-1.5625 v -3.59376 q 0,-1.5625 -1.765527,-1.5625 H 5.3712868 q -1.7655276,0 -1.7655276,1.5625 z m -2.64829153,0 q 0,-4.6875 4.41381913,-4.6875 h 7.3563652 q 4.413819,0 4.413819,4.6875 v 3.59376 q 0,4.6875 -4.413819,4.6875 H 5.3712868 q -4.41381913,0 -4.41381913,-4.6875 z"
+     id="text9"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="o" />
+  <path
+     d="m 3.6057592,184.49756 v 3.59375 q 0,1.5625 1.7655276,1.5625 h 7.3563652 q 1.765527,0 1.765527,-1.5625 v -3.59375 q 0,-1.5625 -1.765527,-1.5625 H 5.3712868 q -1.7655276,0 -1.7655276,1.5625 z m -2.64829153,0 q 0,-4.68751 4.41381913,-4.68751 h 7.3563652 q 4.413819,0 4.413819,4.68751 v 3.59375 q 0,4.6875 -4.413819,4.6875 H 5.3712868 q -4.41381913,0 -4.41381913,-4.6875 z"
+     id="text8"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="o" />
+  <path
+     d="M 0.36895847,198.24757 H 22.438054 l 1.324146,2.96875 v 0.15625 H 1.6931042 l -1.32414573,-2.96875 z"
+     id="text7"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="l" />
+  <path
+     d="M 0.36895847,220.12259 H 22.438054 l 0.735636,1.65625 v 8.34375 q 0,5.46876 -5.149455,5.46876 h -4.413819 q -5.1494559,0 -5.1494559,-5.46876 v -6.875 H 1.6931042 l -1.32414573,-2.96875 z m 20.15644053,3.125 h -9.416147 v 6.875 q 0,2.34376 2.501164,2.34376 h 4.413819 q 2.501164,0 2.501164,-2.34376 z"
+     id="text6"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="P" />
+  <path
+     d="M 0.36895847,241.0601 H 22.438054 l 1.324146,2.96875 v 0.15625 H 1.6931042 l -1.32414573,-2.96875 z"
+     id="text5"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="l" />
+  <path
+     d="m 3.6057592,253.5601 v 3.28125 q 0,1.5625 1.7655276,1.5625 h 2.0156441 q 1.7655275,0 1.7655275,-1.5625 v -3.28125 q 0,-1.5625 -1.7655275,-1.5625 H 5.3712868 q -1.7655276,0 -1.7655276,1.5625 z m -2.64829153,0 q 0,-4.6875 4.41381913,-4.6875 h 2.0156441 q 4.4138191,0 4.4138191,4.6875 v 3.28125 q 0,0.81251 -0.441382,1.5625 h 1.368284 q 1.765527,0 1.765527,-1.5625 v -5.59375 h 0.147128 l 2.501164,1.25 v 4.34375 q 0,4.68751 -4.413819,4.68751 H 1.6931042 L 0.36895847,258.5601 v -0.15625 H 1.3988496 q -0.44138193,-0.59374 -0.44138193,-1.5625 z"
+     id="text4"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="a" />
+  <path
+     d="M 0.36895847,268.27887 H 14.463754 v -4.01563 h 0.147128 l 2.530589,1.26562 v 2.75001 h 5.296583 l 1.324146,2.96875 v 0.15625 h -6.620729 v 4.01562 h -0.147128 l -2.530589,-1.26562 v -2.75 H 1.6931042 l -1.32414573,-2.96875 z"
+     id="text3"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="t" />
+  <path
+     d="m 0.95746767,282.84136 q 0,-4.6875 4.41381913,-4.6875 h 7.3563652 q 4.413819,0 4.413819,4.6875 v 3.59376 q 0,4.6875 -4.413819,4.6875 h -0.779775 l -7.135674,-9.79688 q -1.2064438,0.21875 -1.2064438,1.51562 v 3.59376 q 0,1.5625 1.7655276,1.5625 h 0.7797747 l 1.3241457,2.96875 v 0.15625 H 5.3712868 q -4.41381913,0 -4.41381913,-4.6875 z m 6.92969593,-1.5625 5.0906044,6.70314 q 1.515411,-0.0938 1.515411,-1.54688 v -3.59376 q 0,-1.5625 -1.765527,-1.5625 z"
+     id="text2"
+     style="font-weight:bold;font-size:31.0518px;font-family:'Nova Square';-inkscape-font-specification:'Nova Square Bold';writing-mode:tb-rl;fill:#b3b3b3;fill-rule:evenodd;stroke-width:13.8763;stroke-miterlimit:3.6"
+     aria-label="e" />
+</svg>

resources/images/plate_move_front.svg

@@ -0,0 +1,74 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   width="43"
+   height="43"
+   viewBox="0 0 43 43"
+   version="1.1"
+   id="svg2"
+   sodipodi:docname="plate_move_front.svg"
+   inkscape:version="1.3.2 (091e20e, 2023-11-25, custom)"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg">
+  <defs
+     id="defs2" />
+  <sodipodi:namedview
+     id="namedview2"
+     pagecolor="#ffffff"
+     bordercolor="#000000"
+     borderopacity="0.25"
+     inkscape:showpageshadow="2"
+     inkscape:pageopacity="0.0"
+     inkscape:pagecheckerboard="0"
+     inkscape:deskcolor="#d1d1d1"
+     inkscape:zoom="22.627417"
+     inkscape:cx="25.168582"
+     inkscape:cy="21.588854"
+     inkscape:window-width="1610"
+     inkscape:window-height="1237"
+     inkscape:window-x="33"
+     inkscape:window-y="721"
+     inkscape:window-maximized="0"
+     inkscape:current-layer="svg2" />
+  <rect
+     x="1.5"
+     y="1.5"
+     width="40"
+     height="40"
+     rx="3.5"
+     style="fill:#e9e9e9;fill-opacity:1"
+     id="rect1" />
+  <path
+     d="M38,2a3,3,0,0,1,3,3V38a3,3,0,0,1-3,3H5a3,3,0,0,1-3-3V5A3,3,0,0,1,5,2H38m0-1H5A4,4,0,0,0,1,5V38a4,4,0,0,0,4,4H38a4,4,0,0,0,4-4V5a4,4,0,0,0-4-4Z"
+     style="fill:#545454"
+     id="path1" />
+  <line
+     x1="33.471352"
+     y1="6.9334393"
+     x2="9.9450846"
+     y2="6.9334393"
+     style="fill:none;stroke:#545454;stroke-width:0.850459;stroke-linecap:round;stroke-linejoin:round"
+     id="line1" />
+  <line
+     x1="32.300442"
+     y1="18.26045"
+     x2="21.987902"
+     y2="8.080493"
+     style="fill:none;stroke:#545454;stroke-width:0.714338;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-1" />
+  <line
+     x1="11.504755"
+     y1="18.329735"
+     x2="21.855713"
+     y2="8.0229683"
+     style="fill:none;stroke:#545454;stroke-width:0.720111;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-1-1" />
+  <line
+     x1="21.938486"
+     y1="36.433311"
+     x2="21.938484"
+     y2="8.6247864"
+     style="fill:none;stroke:#545454;stroke-width:0.623622;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-1-1-2" />
+</svg>

resources/images/plate_move_front_dark.svg

@@ -0,0 +1,74 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   width="43"
+   height="43"
+   viewBox="0 0 43 43"
+   version="1.1"
+   id="svg2"
+   sodipodi:docname="plate_close_dark.svg"
+   inkscape:version="1.3.2 (091e20e, 2023-11-25, custom)"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg">
+  <defs
+     id="defs2" />
+  <sodipodi:namedview
+     id="namedview2"
+     pagecolor="#ffffff"
+     bordercolor="#000000"
+     borderopacity="0.25"
+     inkscape:showpageshadow="2"
+     inkscape:pageopacity="0.0"
+     inkscape:pagecheckerboard="0"
+     inkscape:deskcolor="#d1d1d1"
+     inkscape:zoom="27.27907"
+     inkscape:cx="21.5"
+     inkscape:cy="21.5"
+     inkscape:window-width="2560"
+     inkscape:window-height="1369"
+     inkscape:window-x="-8"
+     inkscape:window-y="658"
+     inkscape:window-maximized="1"
+     inkscape:current-layer="svg2" />
+  <rect
+     x="1.5"
+     y="1.5"
+     width="40"
+     height="40"
+     rx="3.5"
+     style="fill:#54545a"
+     id="rect1" />
+  <path
+     d="M38,2a3,3,0,0,1,3,3V38a3,3,0,0,1-3,3H5a3,3,0,0,1-3-3V5A3,3,0,0,1,5,2H38m0-1H5A4,4,0,0,0,1,5V38a4,4,0,0,0,4,4H38a4,4,0,0,0,4-4V5a4,4,0,0,0-4-4Z"
+     style="fill:#b3b3b3"
+     id="path1" />
+  <line
+     x1="9.7239828"
+     y1="6.5068207"
+     x2="34.155807"
+     y2="6.5068207"
+     style="fill:none;stroke:#c4c4c4;stroke-width:0.866675;stroke-linecap:round;stroke-linejoin:round"
+     id="line1" />
+  <line
+     x1="22.228071"
+     y1="7.6491632"
+     x2="22.228073"
+     y2="31.964647"
+     style="fill:none;stroke:#c4c4c4;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-2" />
+  <line
+     x1="22.195042"
+     y1="7.4747553"
+     x2="10.588115"
+     y2="19.081686"
+     style="fill:none;stroke:#c4c4c4;stroke-width:0.675072;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-2-2" />
+  <line
+     x1="33.868591"
+     y1="19.080866"
+     x2="22.261658"
+     y2="7.4739408"
+     style="fill:none;stroke:#c4c4c4;stroke-width:0.675072;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-2-2-7" />
+</svg>

resources/images/plate_move_front_hover.svg

@@ -0,0 +1,74 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   width="43"
+   height="43"
+   viewBox="0 0 43 43"
+   version="1.1"
+   id="svg2"
+   sodipodi:docname="plate_close.svg"
+   inkscape:version="1.3.2 (091e20e, 2023-11-25, custom)"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg">
+  <defs
+     id="defs2" />
+  <sodipodi:namedview
+     id="namedview2"
+     pagecolor="#ffffff"
+     bordercolor="#000000"
+     borderopacity="0.25"
+     inkscape:showpageshadow="2"
+     inkscape:pageopacity="0.0"
+     inkscape:pagecheckerboard="0"
+     inkscape:deskcolor="#d1d1d1"
+     inkscape:zoom="22.627417"
+     inkscape:cx="25.168582"
+     inkscape:cy="21.588854"
+     inkscape:window-width="1610"
+     inkscape:window-height="1237"
+     inkscape:window-x="1460"
+     inkscape:window-y="754"
+     inkscape:window-maximized="0"
+     inkscape:current-layer="svg2" />
+  <rect
+     x="1.5"
+     y="1.5"
+     width="40"
+     height="40"
+     rx="3.5"
+     style="fill:#e9e9e9;fill-opacity:1"
+     id="rect1" />
+  <path
+     d="M38,2a3,3,0,0,1,3,3V38a3,3,0,0,1-3,3H5a3,3,0,0,1-3-3V5A3,3,0,0,1,5,2H38m0-1H5A4,4,0,0,0,1,5V38a4,4,0,0,0,4,4H38a4,4,0,0,0,4-4V5a4,4,0,0,0-4-4Z"
+     style="fill:#009688"
+     id="path1" />
+  <line
+     x1="33.471352"
+     y1="6.9334393"
+     x2="9.9450846"
+     y2="6.9334393"
+     style="fill:none;stroke:#009688;stroke-width:0.850459;stroke-linecap:round;stroke-linejoin:round"
+     id="line1" />
+  <line
+     x1="32.300442"
+     y1="18.26045"
+     x2="21.987902"
+     y2="8.080493"
+     style="fill:none;stroke:#009688;stroke-width:0.714338;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-1" />
+  <line
+     x1="11.504755"
+     y1="18.329735"
+     x2="21.855713"
+     y2="8.0229683"
+     style="fill:none;stroke:#009688;stroke-width:0.720111;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-1-1" />
+  <line
+     x1="21.938486"
+     y1="36.433311"
+     x2="21.938484"
+     y2="8.6247864"
+     style="fill:none;stroke:#009688;stroke-width:0.623622;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-1-1-2" />
+</svg>

resources/images/plate_move_front_hover_dark.svg

@@ -0,0 +1,74 @@
+<?xml version="1.0" encoding="UTF-8" standalone="no"?>
+<svg
+   width="43"
+   height="43"
+   viewBox="0 0 43 43"
+   version="1.1"
+   id="svg2"
+   sodipodi:docname="plate_move_front_hover_dark.svg"
+   inkscape:version="1.3.2 (091e20e, 2023-11-25, custom)"
+   xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
+   xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
+   xmlns="http://www.w3.org/2000/svg"
+   xmlns:svg="http://www.w3.org/2000/svg">
+  <defs
+     id="defs2" />
+  <sodipodi:namedview
+     id="namedview2"
+     pagecolor="#ffffff"
+     bordercolor="#000000"
+     borderopacity="0.25"
+     inkscape:showpageshadow="2"
+     inkscape:pageopacity="0.0"
+     inkscape:pagecheckerboard="0"
+     inkscape:deskcolor="#d1d1d1"
+     inkscape:zoom="19.289215"
+     inkscape:cx="20.555528"
+     inkscape:cy="24.85845"
+     inkscape:window-width="1350"
+     inkscape:window-height="1237"
+     inkscape:window-x="36"
+     inkscape:window-y="759"
+     inkscape:window-maximized="0"
+     inkscape:current-layer="svg2" />
+  <rect
+     x="1.5"
+     y="1.5"
+     width="40"
+     height="40"
+     rx="3.5"
+     style="fill:#54545a"
+     id="rect1" />
+  <path
+     d="M38,2a3,3,0,0,1,3,3V38a3,3,0,0,1-3,3H5a3,3,0,0,1-3-3V5A3,3,0,0,1,5,2H38m0-1H5A4,4,0,0,0,1,5V38a4,4,0,0,0,4,4H38a4,4,0,0,0,4-4V5a4,4,0,0,0-4-4Z"
+     style="fill:#009688"
+     id="path1" />
+  <line
+     x1="9.7239828"
+     y1="6.5068207"
+     x2="34.155807"
+     y2="6.5068207"
+     style="fill:none;stroke:#009688;stroke-width:0.866675;stroke-linecap:round;stroke-linejoin:round"
+     id="line1" />
+  <line
+     x1="22.228071"
+     y1="7.6491632"
+     x2="22.228073"
+     y2="31.964647"
+     style="fill:none;stroke:#009688;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-2" />
+  <line
+     x1="22.195042"
+     y1="7.4747553"
+     x2="10.588115"
+     y2="19.081686"
+     style="fill:none;stroke:#009688;stroke-width:0.675072;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-2-2" />
+  <line
+     x1="33.868591"
+     y1="19.080866"
+     x2="22.261658"
+     y2="7.4739408"
+     style="fill:none;stroke:#009688;stroke-width:0.675072;stroke-linecap:round;stroke-linejoin:round"
+     id="line1-2-2-7" />
+</svg>

resources/profiles/Anker.json

@@ -1,6 +1,6 @@
 {
     "name": "Anker",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "Anker configurations",
     "machine_model_list": [

resources/profiles/Anycubic.json

@@ -1,6 +1,6 @@
 {
     "name": "Anycubic",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "Anycubic configurations",
     "machine_model_list": [

resources/profiles/Artillery.json

@@ -1,6 +1,6 @@
 {
     "name": "Artillery",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "Artillery configurations",
     "machine_model_list": [

resources/profiles/Artillery/filament/Artillery ABS.json

@@ -74,6 +74,12 @@
     ],
 	"close_fan_the_first_x_layers": [
         "3"
+    ],
+	"enable_pressure_advance": [
+        "1"
+    ],
+	"pressure_advance": [
+        "0.05"
     ],
     "version": "2.0.2.0"
 }

resources/profiles/Artillery/filament/Artillery PETG.json

@@ -74,6 +74,12 @@
     ],
 	"overhang_fan_speed": [
         "90"
+    ],
+	"enable_pressure_advance": [
+        "1"
+    ],
+	"pressure_advance": [
+        "0.05"
     ],
     "version": "2.0.2.0"
 }

resources/profiles/Artillery/filament/Artillery PLA Basic.json

@@ -53,6 +53,12 @@
     ],
     "temperature_vitrification": [
         "190"
+    ],
+	"enable_pressure_advance": [
+        "1"
+    ],
+	"pressure_advance": [
+        "0.046"
     ],
     "version": "2.0.2.0"
 }

resources/profiles/Artillery/filament/Artillery PLA Matte.json

@@ -53,6 +53,12 @@
     ],
     "temperature_vitrification": [
         "190"
+    ],
+	"enable_pressure_advance": [
+        "1"
+    ],
+	"pressure_advance": [
+        "0.046"
     ],
     "version": "2.0.2.0"
 }

resources/profiles/Artillery/filament/Artillery PLA Silk.json

@@ -53,6 +53,12 @@
     ],
     "temperature_vitrification": [
         "190"
+    ],
+	"enable_pressure_advance": [
+        "1"
+    ],
+	"pressure_advance": [
+        "0.046"
     ],
     "version": "2.0.2.0"
 }

resources/profiles/Artillery/filament/Artillery PLA Tough.json

@@ -59,6 +59,12 @@
     ],
     "hot_plate_temp_initial_layer": [
         "65"
+    ],
+	"enable_pressure_advance": [
+        "1"
+    ],
+	"pressure_advance": [
+        "0.046"
     ],
     "version": "2.0.2.0"
 }

resources/profiles/Artillery/filament/Artillery TPU.json

@@ -71,6 +71,12 @@
     ],
 	"overhang_fan_threshold": [
         "95%"
+    ],
+	"enable_pressure_advance": [
+        "1"
+    ],
+	"pressure_advance": [
+        "0.06"
     ],
     "version": "2.0.2.0"
 }

resources/profiles/Artillery/machine/Artillery Sidewinder X3 Plus 0.4 nozzle.json

@@ -137,7 +137,7 @@
         "0.4"
     ],
     "nozzle_hrc": "0",
-    "nozzle_type": "hardened_steel",
+    "nozzle_type": "brass",
     "nozzle_volume": "0",
     "parking_pos_retraction": "92",
     "preferred_orientation": "0",

resources/profiles/Artillery/machine/Artillery Sidewinder X3 Pro 0.4 nozzle.json

@@ -137,7 +137,7 @@
         "0.08"
     ],
     "nozzle_hrc": "0",
-    "nozzle_type": "hardened_steel",
+    "nozzle_type": "brass",
     "nozzle_volume": "0",
     "parking_pos_retraction": "92",
     "preferred_orientation": "0",

resources/profiles/Artillery/machine/Artillery Sidewinder X4 Plus 0.4 nozzle.json

@@ -56,7 +56,7 @@
     "host_type": "octoprint",
     "is_custom_defined": "0",
     "layer_change_gcode": "G92 E0",
-    "machine_end_gcode": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 E-1 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X5 Y280 F3000 ;Wipe out\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
+    "machine_end_gcode": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 E-1 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X-5 Y305 F3000 ;Wipe out\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
     "machine_load_filament_time": "0",
     "machine_max_acceleration_e": [
         "6000",
@@ -127,7 +127,7 @@
         "0"
     ],
     "machine_pause_gcode": "M600",
-    "machine_start_gcode": "M140 S60\nM104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nNOZZLE_WIPE\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nDRAW_LINE_ONLY",
+    "machine_start_gcode": "M104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nG1 X230 Y300 Z10 F5000\nSET_KINEMATIC_POSITION Y=0\nG1 Y20  F4000\nG1 X230 F4000\nG1 Z-1  F600 \nG1 X270 F4000\nG1 Y25  F4000\nG1 X230 F4000\nG92 E0\nG1 Z10 F1200\nG1 Y0 F5000\nG1 E-1 F3000\nM400\nSET_KINEMATIC_POSITION Y=300\nG92 E-1\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nG1 X0 Y0.8 Z0.8 F18000\nG92 E0\nG1 X0 Y0.8 Z0.3 E8 F600\nG92 E0\nG1 X200 Y0.8 Z0.3 F1800.0 E20.0;draw line\nG92 E0\nG1 X200 Y0 Z0.3 F1800.0 E0.08;draw line\nG92 E0\nG1 X100 Y0 Z0.3 F1800.0 E10.0;draw line\nG92 E0\nG1 X100 Y1.6 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 X180 Y1.6 Z0.3 F1800.0 E8;draw line\nG92 E0\nG1 X180 Y0 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 E-1 Z5 F18000\nG92 E0",
     "machine_unload_filament_time": "0",
     "manual_filament_change": "0",
     "max_layer_height": [
@@ -137,7 +137,7 @@
         "0.08"
     ],
     "nozzle_hrc": "0",
-    "nozzle_type": "hardened_steel",
+    "nozzle_type": "brass",
     "nozzle_volume": "0",
     "parking_pos_retraction": "92",
     "preferred_orientation": "0",
@@ -146,8 +146,8 @@
     "printable_area": [
         "0x0",
         "300x0",
-        "300x300",
-        "0x300"
+        "300x310",
+        "0x310"
     ],
     "printable_height": "400",
     "printer_notes": "",

resources/profiles/Artillery/machine/Artillery Sidewinder X4 Pro 0.4 nozzle.json

@@ -56,7 +56,7 @@
     "host_type": "octoprint",
     "is_custom_defined": "0",
     "layer_change_gcode": "G92 E0",
-    "machine_end_gcode": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 E-1 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X5 Y200 F3000 ;Wipe out\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
+    "machine_end_gcode": "G91 ;Relative positioning\nG1 E-1 F2700 ;Retract a bit\nG1 E-1 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z1 ;Raise Z more\nG90 ;Absolute positionning\nG1 X-5 Y250  F3000 ;Wipe out\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
     "machine_load_filament_time": "0",
     "machine_max_acceleration_e": [
         "5000",
@@ -127,7 +127,7 @@
         "0"
     ],
     "machine_pause_gcode": "M600",
-    "machine_start_gcode": "M140 S60\nM104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nNOZZLE_WIPE\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nDRAW_LINE_ONLY",
+    "machine_start_gcode": "M104 S140\nM190 S[first_layer_bed_temperature]\nM109 S{temperature_vitrification[0]}\nG28;\nG1 X180 Y247 Z10 F5000\nSET_KINEMATIC_POSITION Y=0\nG1 Y11 F4000\nG1 X180 F4000\nG1 Z-1 F600 \nG1 X230 F4000\nG1 Y15 F4000\nG1 X180 F4000\nG92 E0\nG1 Z10 F1200\nG1 Y0 F5000\nG1 E-1 F3000\nM400\nSET_KINEMATIC_POSITION Y=247\nG92 E-1\nM140 S[first_layer_bed_temperature];\nM104 S[first_layer_temperature];\nG1 X0 Y0.8 Z0.8 F18000\nG92 E0\nG1 X0 Y0.8 Z0.3 E8 F600\nG92 E0\nG1 X170 Y0.8 Z0.3 F1800.0 E17.0;draw line\nG92 E0\nG1 X170 Y0 Z0.3 F1800.0 E0.08;draw line\nG92 E0\nG1 X70 Y0 Z0.3 F1800.0 E10.0;draw line\nG92 E0\nG1 X70 Y1.6 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 X150 Y1.6 Z0.3 F1800.0 E8;draw line\nG92 E0\nG1 X150 Y0 Z0.3 F1800.0 E0.16;draw line\nG92 E0\nG1 E-1 Z5 F18000\nG92 E0\n",
     "machine_unload_filament_time": "0",
     "manual_filament_change": "0",
     "max_layer_height": [
@@ -137,7 +137,7 @@
         "0.08"
     ],
     "nozzle_hrc": "0",
-    "nozzle_type": "hardened_steel",
+    "nozzle_type": "brass",
     "nozzle_volume": "0",
     "parking_pos_retraction": "92",
     "preferred_orientation": "0",
@@ -146,8 +146,8 @@
     "printable_area": [
         "0x0",
         "240x0",
-        "240x240",
-        "0x240"
+        "240x250",
+        "0x250"
     ],
     "printable_height": "260",
     "printer_notes": "",

resources/profiles/BIQU.json

@@ -1,6 +1,6 @@
 {
     "name": "BIQU",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "BIQU configurations",
     "machine_model_list": [

resources/profiles/CONSTRUCT3D.json

@@ -1,6 +1,6 @@
 {
     "name": "CONSTRUCT3D",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "Construct3D configurations",
     "machine_model_list": [

resources/profiles/Chuanying.json

@@ -1,7 +1,7 @@
 {
   "name": "Chuanying",
   "url": "",
-  "version": "02.02.00.00",
+  "version": "02.02.00.01",
   "force_update": "0",
   "description": "Chuanying configurations",
   "machine_model_list": [

resources/profiles/Co Print.json

@@ -0,0 +1,55 @@
+{
+  "name": "Co Print",
+  "version": "02.02.00.01",
+  "force_update": "0",
+  "description": "CoPrint configurations",
+  "machine_model_list": [
+      {
+          "name": "Co Print ChromaSet",
+          "sub_path": "machine/Co Print ChromaSet.json"
+      }
+  ],
+  "process_list": [
+      {
+    "name": "fdm_process_common",
+    "sub_path": "process/fdm_process_common.json"
+  }, {
+    "name": "fdm_process_coprint_common",
+    "sub_path": "process/fdm_process_coprint_common.json"
+  }, {
+    "name": "0.2mm Standard @Co Print ChromaSet 0.4",
+    "sub_path": "process/0.2mm Standard @Co Print ChromaSet 0.4.json"
+  }, {
+    "name": "0.2mm Fast @Co Print ChromaSet 0.4",
+    "sub_path": "process/0.2mm Fast @Co Print ChromaSet 0.4.json"
+  }
+  ],
+  "filament_list": [
+		{
+			"name": "fdm_filament_common",
+			"sub_path": "filament/fdm_filament_common.json"
+		},
+		{
+			"name": "fdm_filament_pla",
+			"sub_path": "filament/fdm_filament_pla.json"
+		},
+    {
+      "name": "CoPrint Generic PLA",
+      "sub_path": "filament/CoPrint Generic PLA.json"
+    }
+	],
+  "machine_list": [
+      {
+    "name": "fdm_machine_common",
+    "sub_path": "machine/fdm_machine_common.json"
+  },
+  {
+      "name": "Co Print ChromaSet 0.4 nozzle",
+      "sub_path": "machine/Co Print ChromaSet 0.4 nozzle.json"
+  },
+  {
+      "name": "Co Print ChromaSet 0.4 nozzle fast",
+      "sub_path": "machine/Co Print ChromaSet 0.4 nozzle fast.json"
+  }
+      ]
+}

resources/profiles/Co Print/Co_Print_ChromaSet_buildplate_model.stl

@@ -0,0 +1,254 @@
+solid OBJECT
+  facet normal -0.38268222937202628 0.92388003080641146 -0
+    outer loop
+      vertex -110.5 112.5 0
+      vertex -111.91421508789062 111.91421508789062 0
+      vertex -111.91421508789062 111.91421508789062 0.30000001192092896
+    endloop
+  endfacet
+  facet normal -0.38268222937202628 0.92388003080641146 0
+    outer loop
+      vertex -110.5 112.5 0
+      vertex -111.91421508789062 111.91421508789062 0.30000001192092896
+      vertex -110.5 112.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal -0.92388003080641146 0.38268222937202628 -0
+    outer loop
+      vertex -111.91421508789062 111.91421508789062 0
+      vertex -112.5 110.5 0
+      vertex -112.5 110.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal -0.92388003080641146 0.38268222937202628 -0
+    outer loop
+      vertex -111.91421508789062 111.91421508789062 0
+      vertex -112.5 110.5 0.30000001192092896
+      vertex -111.91421508789062 111.91421508789062 0.30000001192092896
+    endloop
+  endfacet
+  facet normal -1 -0 -0
+    outer loop
+      vertex -112.5 110.5 0
+      vertex -112.5 -110.5 0
+      vertex -112.5 -110.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal -1 -0 -0
+    outer loop
+      vertex -112.5 110.5 0
+      vertex -112.5 -110.5 0.30000001192092896
+      vertex -112.5 110.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal -0.70710678118654746 -0.70710678118654746 -0
+    outer loop
+      vertex -112.5 -110.5 0
+      vertex -110.5 -112.5 0
+      vertex -110.5 -112.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal -0.70710678118654746 -0.70710678118654746 -0
+    outer loop
+      vertex -112.5 -110.5 0
+      vertex -110.5 -112.5 0.30000001192092896
+      vertex -112.5 -110.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal 0 -1 -0
+    outer loop
+      vertex -110.5 -112.5 0
+      vertex 110.5 -112.5 0
+      vertex 110.5 -112.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal 0 -1 -0
+    outer loop
+      vertex -110.5 -112.5 0
+      vertex 110.5 -112.5 0.30000001192092896
+      vertex -110.5 -112.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal 0.38268222937202628 -0.92388003080641146 -0
+    outer loop
+      vertex 110.5 -112.5 0
+      vertex 111.91421508789062 -111.91421508789062 0
+      vertex 111.91421508789062 -111.91421508789062 0.30000001192092896
+    endloop
+  endfacet
+  facet normal 0.38268222937202628 -0.92388003080641146 -0
+    outer loop
+      vertex 110.5 -112.5 0
+      vertex 111.91421508789062 -111.91421508789062 0.30000001192092896
+      vertex 110.5 -112.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal 0.92388003080641146 -0.38268222937202628 -0
+    outer loop
+      vertex 111.91421508789062 -111.91421508789062 0
+      vertex 112.5 -110.5 0
+      vertex 112.5 -110.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal 0.92388003080641146 -0.38268222937202628 0
+    outer loop
+      vertex 111.91421508789062 -111.91421508789062 0
+      vertex 112.5 -110.5 0.30000001192092896
+      vertex 111.91421508789062 -111.91421508789062 0.30000001192092896
+    endloop
+  endfacet
+  facet normal 1 -0 0
+    outer loop
+      vertex 112.5 -110.5 0
+      vertex 112.5 110.5 0
+      vertex 112.5 110.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal 1 -0 0
+    outer loop
+      vertex 112.5 -110.5 0
+      vertex 112.5 110.5 0.30000001192092896
+      vertex 112.5 -110.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal 0.70710678118654746 0.70710678118654746 -0
+    outer loop
+      vertex 112.5 110.5 0
+      vertex 110.5 112.5 0
+      vertex 110.5 112.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal 0.70710678118654746 0.70710678118654746 0
+    outer loop
+      vertex 112.5 110.5 0
+      vertex 110.5 112.5 0.30000001192092896
+      vertex 112.5 110.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal 0 1 0
+    outer loop
+      vertex 110.5 112.5 0
+      vertex -110.5 112.5 0
+      vertex -110.5 112.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal 0 1 0
+    outer loop
+      vertex 110.5 112.5 0
+      vertex -110.5 112.5 0.30000001192092896
+      vertex 110.5 112.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal -0 0 -1
+    outer loop
+      vertex 112.5 110.5 0
+      vertex 112.5 -110.5 0
+      vertex -110.5 -112.5 0
+    endloop
+  endfacet
+  facet normal 0 -0 -1
+    outer loop
+      vertex 111.91421508789062 -111.91421508789062 0
+      vertex 110.5 -112.5 0
+      vertex 112.5 -110.5 0
+    endloop
+  endfacet
+  facet normal 0 -0 -1
+    outer loop
+      vertex 112.5 -110.5 0
+      vertex 110.5 -112.5 0
+      vertex -110.5 -112.5 0
+    endloop
+  endfacet
+  facet normal 0 0 -1
+    outer loop
+      vertex -110.5 112.5 0
+      vertex 110.5 112.5 0
+      vertex 112.5 110.5 0
+    endloop
+  endfacet
+  facet normal -0 0 -1
+    outer loop
+      vertex -112.5 110.5 0
+      vertex -111.91421508789062 111.91421508789062 0
+      vertex -110.5 112.5 0
+    endloop
+  endfacet
+  facet normal 0 0 -1
+    outer loop
+      vertex -110.5 -112.5 0
+      vertex -112.5 -110.5 0
+      vertex 112.5 110.5 0
+    endloop
+  endfacet
+  facet normal 0 -0 -1
+    outer loop
+      vertex -112.5 -110.5 0
+      vertex -112.5 110.5 0
+      vertex 112.5 110.5 0
+    endloop
+  endfacet
+  facet normal -0 0 -1
+    outer loop
+      vertex -110.5 112.5 0
+      vertex 112.5 110.5 0
+      vertex -112.5 110.5 0
+    endloop
+  endfacet
+  facet normal 0 -0 1
+    outer loop
+      vertex 112.5 110.5 0.30000001192092896
+      vertex -110.5 -112.5 0.30000001192092896
+      vertex 112.5 -110.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal 0 0 1
+    outer loop
+      vertex 111.91421508789062 -111.91421508789062 0.30000001192092896
+      vertex 112.5 -110.5 0.30000001192092896
+      vertex 110.5 -112.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal 0 -0 1
+    outer loop
+      vertex 112.5 -110.5 0.30000001192092896
+      vertex -110.5 -112.5 0.30000001192092896
+      vertex 110.5 -112.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal 0 0 1
+    outer loop
+      vertex -110.5 112.5 0.30000001192092896
+      vertex 112.5 110.5 0.30000001192092896
+      vertex 110.5 112.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal -0 0 1
+    outer loop
+      vertex -112.5 110.5 0.30000001192092896
+      vertex -110.5 112.5 0.30000001192092896
+      vertex -111.91421508789062 111.91421508789062 0.30000001192092896
+    endloop
+  endfacet
+  facet normal 0 0 1
+    outer loop
+      vertex -110.5 -112.5 0.30000001192092896
+      vertex 112.5 110.5 0.30000001192092896
+      vertex -112.5 -110.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal -0 0 1
+    outer loop
+      vertex -112.5 -110.5 0.30000001192092896
+      vertex 112.5 110.5 0.30000001192092896
+      vertex -112.5 110.5 0.30000001192092896
+    endloop
+  endfacet
+  facet normal -0 -0 1
+    outer loop
+      vertex -110.5 112.5 0.30000001192092896
+      vertex -112.5 110.5 0.30000001192092896
+      vertex 112.5 110.5 0.30000001192092896
+    endloop
+  endfacet
+endsolid OBJECT

resources/profiles/Co Print/filament/CoPrint Generic PLA.json

@@ -0,0 +1,19 @@
+{
+	"type": "filament",
+	"filament_id": "GFL99",
+	"setting_id": "GFSA04",
+	"name": "CoPrint Generic PLA",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_filament_pla",
+	"filament_load_time": [
+        "10"
+      ],
+      "filament_unload_time": [
+        "10"
+      ],
+	"compatible_printers": [
+		"Co Print ChromaSet 0.4 nozzle",
+		"Co Print ChromaSet 0.4 nozzle fast"
+	]
+}

resources/profiles/Co Print/filament/fdm_filament_common.json

@@ -0,0 +1,136 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_common",
+    "from": "system",
+    "instantiation": "false",
+    "cool_plate_temp" : [
+        "60"
+    ],
+    "eng_plate_temp" : [
+        "60"
+    ],
+    "hot_plate_temp" : [
+        "60"
+    ],
+    "textured_plate_temp" : [
+        "60"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "textured_plate_temp_initial_layer" : [
+        "60"
+    ],
+    "overhang_fan_threshold": [
+        "95%"
+    ],
+    "overhang_fan_speed": [
+        "100"
+    ],
+    "slow_down_for_layer_cooling": [
+        "1"
+    ],
+    "close_fan_the_first_x_layers": [
+        "3"
+    ],
+
+    "filament_flow_ratio": [
+        "0.91"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "0"
+    ],
+    "fan_cooling_layer_time": [
+        "60"
+    ],
+    "filament_cost": [
+        "0"
+    ],
+    "filament_density": [
+        "0"
+    ],
+    "filament_deretraction_speed": [
+        "nil"
+    ],
+    "filament_diameter": [
+        "1.75"
+    ],
+    "filament_max_volumetric_speed": [
+        "15"
+    ],
+    "filament_minimal_purge_on_wipe_tower": [
+        "15"
+    ],
+    "filament_retraction_minimum_travel": [
+        "nil"
+    ],
+    "filament_retract_before_wipe": [
+        "nil"
+    ],
+    "filament_retract_when_changing_layer": [
+        "nil"
+    ],
+    "filament_retraction_length": [
+        "nil"
+    ],
+    "filament_z_hop": [
+        "nil"
+    ],
+    "filament_retract_restart_extra": [
+        "nil"
+    ],
+    "filament_retraction_speed": [
+        "nil"
+    ],
+    "filament_settings_id": [
+        ""
+    ],
+    "filament_soluble": [
+        "0"
+    ],
+    "filament_type": [
+        "PLA"
+    ],
+    "filament_vendor": [
+        "Co Print"
+    ],
+    "filament_wipe": [
+        "nil"
+    ],
+    "filament_wipe_distance": [
+        "nil"
+    ],
+    "bed_type": [
+        "Cool Plate"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "200"
+    ],
+    "full_fan_speed_layer": [
+        "0"
+    ],
+    "fan_max_speed": [
+        "100"
+    ],
+    "fan_min_speed": [
+        "100"
+    ],
+    "slow_down_min_speed": [
+        "10"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "nozzle_temperature": [
+        "200"
+    ],
+    "temperature_vitrification": [
+        "100"
+    ]
+}

resources/profiles/Co Print/filament/fdm_filament_pla.json

@@ -0,0 +1,207 @@
+{
+    "type": "filament",
+    "name": "fdm_filament_pla",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_filament_common",
+    "activate_air_filtration": [
+        "0"
+      ],
+      "additional_cooling_fan_speed": [
+        "70"
+      ],
+      "chamber_temperatures": [
+        "0"
+      ],
+      "close_fan_the_first_x_layers": [
+        "1"
+      ],
+      "complete_print_exhaust_fan_speed": [
+        "100"
+      ],
+      "cool_plate_temp": [
+        "35"
+      ],
+      "cool_plate_temp_initial_layer": [
+        "35"
+      ],
+      "during_print_exhaust_fan_speed": [
+        "100"
+      ],
+      "eng_plate_temp": [
+        "0"
+      ],
+      "eng_plate_temp_initial_layer": [
+        "0"
+      ],
+      "fan_cooling_layer_time": [
+        "50"
+      ],
+      "fan_max_speed": [
+        "100"
+      ],
+      "fan_min_speed": [
+        "100"
+      ],
+      "filament_cost": [
+        "20"
+      ],
+      "filament_density": [
+        "1.24"
+      ],
+      "filament_deretraction_speed": [
+        "nil"
+      ],
+      "filament_diameter": [
+        "1.75"
+      ],
+      "filament_flow_ratio": [
+        "0.91"
+      ],
+      "filament_is_support": [
+        "0"
+      ],
+
+      "filament_max_volumetric_speed": [
+        "15"
+      ],
+      "filament_minimal_purge_on_wipe_tower": [
+        "15"
+      ],
+      "filament_retract_before_wipe": [
+        "nil"
+      ],
+      "filament_retract_restart_extra": [
+        "nil"
+      ],
+      "filament_retract_when_changing_layer": [
+        "nil"
+      ],
+      "filament_retraction_length": [
+        "nil"
+      ],
+      "filament_retraction_minimum_travel": [
+        "nil"
+      ],
+      "filament_retraction_speed": [
+        "nil"
+      ],
+      "filament_settings_id": [
+        ""
+      ],
+      "filament_soluble": [
+        "0"
+      ],
+      "filament_type": [
+        "PLA"
+      ],
+      "filament_vendor": [
+        "Co Print"
+      ],
+      "filament_wipe": [
+        "nil"
+      ],
+      "filament_wipe_distance": [
+        "nil"
+      ],
+      "filament_z_hop": [
+        "nil"
+      ],
+      "full_fan_speed_layer": [
+        "3"
+      ],
+      "hot_plate_temp": [
+        "60"
+      ],
+      "hot_plate_temp_initial_layer": [
+        "60"
+      ],
+      "nozzle_temperature": [
+        "210"
+      ],
+      "nozzle_temperature_initial_layer": [
+        "210"
+      ],
+      "nozzle_temperature_range_low": [
+        "190"
+      ],
+      "nozzle_temperature_range_high": [
+        "250"
+      ],
+      "overhang_fan_speed": [
+        "100"
+      ],
+      "overhang_fan_threshold": [
+        "50%"
+      ],
+      "reduce_fan_stop_start_freq": [
+        "1"
+      ],
+      "required_nozzle_HRC": [
+        "3"
+      ],
+      "slow_down_for_layer_cooling": [
+        "1"
+      ],
+      "slow_down_layer_time": [
+        "5"
+      ],
+      "slow_down_min_speed": [
+        "10"
+      ],
+      "temperature_vitrification": [
+        "45"
+      ],
+      "textured_plate_temp": [
+        "55"
+      ],
+      "textured_plate_temp_initial_layer": [
+        "55"
+      ],
+      "compatible_printers": [],
+      "filament_shrink": [
+        "100"
+      ],
+      "filament_loading_speed_start": [
+        "3"
+      ],
+      "filament_loading_speed": [
+        "28"
+      ],
+      "filament_unloading_speed_start": [
+        "100"
+      ],
+      "filament_unloading_speed": [
+        "90"
+      ],
+      "filament_load_time": [
+        "0"
+      ],
+      "filament_unload_time": [
+        "0"
+      ],
+      "filament_toolchange_delay": [
+        "0"
+      ],
+      "filament_cooling_moves": [
+        "0"
+      ],
+      "filament_cooling_initial_speed": [
+        "2.2"
+      ],
+      "filament_cooling_final_speed": [
+        "3.4"
+      ],
+      
+  "enable_pressure_advance": [
+    "1"
+  ],
+  "pressure_advance": [
+    "0.05"
+  ]
+    
+    
+    
+    
+    }
+

resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle fast.json

@@ -0,0 +1,149 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Co Print ChromaSet 0.4 nozzle fast",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_machine_common",
+	"printer_model": "Co Print ChromaSet",
+	"default_print_profile": "0.2mm Fast @Co Print ChromaSet 0.4",
+    "printer_variant": "0.4",
+	"nozzle_diameter": [
+		"0.4"
+	],
+    "retract_before_wipe": [
+        "70%"
+    ],
+	"printable_area": [
+		"0x0",
+		"225x0",
+		"225x225",
+		"0x225"
+	],
+	"printable_height": "345",
+	"gcode_flavor": "klipper",
+    "retraction_length": [
+        "1"
+    ],
+    "machine_max_speed_e": [
+        "20"
+    ],
+    "machine_max_speed_x": [
+        "700"
+    ],
+    "machine_max_speed_y": [
+        "700"
+    ],
+    "machine_max_speed_z": [
+        "20"
+    ],
+    "machine_max_acceleration_e": [
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "20000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "5000"
+    ],
+	"machine_max_acceleration_travel": [
+        "40000"
+    ],
+    "machine_max_acceleration_x": [
+        "20000"
+    ],
+    "machine_max_acceleration_y": [
+        "20000"
+    ],
+    "machine_max_acceleration_z": [
+        "500"
+    ],
+    "machine_max_jerk_e": [
+        "5"
+    ],
+    "machine_max_jerk_x": [
+        "20"
+    ],
+    "machine_max_jerk_y": [
+        "20"
+    ],
+    "machine_max_jerk_z": [
+        "0.5"
+    ],
+	"z_hop": [
+        "0.2"
+    ],
+	"retraction_speed": [
+        "30"
+    ],
+	"deretraction_speed": [
+        "30"
+    ],
+	"retraction_minimum_travel": [
+        "1"
+    ],
+    "retract_length_toolchange": [
+        "2"
+    ],
+    "wipe": [
+        "1"
+    ],
+	"wipe_distance": [
+        "2"
+    ],
+	"thumbnails": [
+		"300x300",
+        "400x300",
+        "32x32"
+	],
+    "retract_lift_below": [
+        "343"
+    ],
+	"thumbnails_format": "PNG",
+	"machine_start_gcode": "start_print  EXTRUDER=[initial_extruder] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "end_print",
+    "change_filament_gcode": "FILAMENT_CHANGE LAYER_NUM=[layer_num] NEXT_EXTRUDER=[next_extruder]",
+    "default_filament_profile": [
+		"Co Print PLA"
+	],
+    "extruder_clearance_radius": [
+        "65"
+    ],
+    "extruder_clearance_height_to_rod": [
+        "36"
+    ],
+    "extruder_clearance_height_to_lid": [
+        "140"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "max_layer_height": [
+        "0.32"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "cooling_tube_retraction": [
+        "0"
+    ],
+    "cooling_tube_length": [
+        "0"
+    ],
+    "parking_pos_retraction": [
+        "25"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "extra_loading_move": [
+        "0"
+    ],
+    "high_current_on_filament_swap": [
+        "1"
+    ],
+    
+    "z_hop_types": "Normal Lift"
+
+
+}

resources/profiles/Co Print/machine/Co Print ChromaSet 0.4 nozzle.json

@@ -0,0 +1,149 @@
+{
+	"type": "machine",
+	"setting_id": "GM001",
+	"name": "Co Print ChromaSet 0.4 nozzle",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_machine_common",
+	"printer_model": "Co Print ChromaSet",
+	"default_print_profile": "0.2mm Standard @Co Print ChromaSet 0.4",
+    "printer_variant": "0.4",
+	"nozzle_diameter": [
+		"0.4"
+	],
+    "retract_before_wipe": [
+        "70%"
+    ],
+	"printable_area": [
+		"0x0",
+		"225x0",
+		"225x225",
+		"0x225"
+	],
+	"printable_height": "345",
+	"gcode_flavor": "klipper",
+    "retraction_length": [
+        "1"
+    ],
+    "machine_max_speed_e": [
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "500"
+    ],
+    "machine_max_speed_y": [
+        "500"
+    ],
+    "machine_max_speed_z": [
+        "20"
+    ],
+    "machine_max_acceleration_e": [
+        "2500"
+    ],
+    "machine_max_acceleration_extruding": [
+        "5000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "2500"
+    ],
+	"machine_max_acceleration_travel": [
+        "40000"
+    ],
+    "machine_max_acceleration_x": [
+        "5000"
+    ],
+    "machine_max_acceleration_y": [
+        "5000"
+    ],
+    "machine_max_acceleration_z": [
+        "500"
+    ],
+    "machine_max_jerk_e": [
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "10"
+    ],
+    "machine_max_jerk_y": [
+        "10"
+    ],
+    "machine_max_jerk_z": [
+        "0.2"
+    ],
+	"z_hop": [
+        "0.2"
+    ],
+	"retraction_speed": [
+        "50"
+    ],
+	"deretraction_speed": [
+        "50"
+    ],
+	"retraction_minimum_travel": [
+        "1"
+    ],
+    "retract_length_toolchange": [
+        "2"
+    ],
+    "wipe": [
+        "0"
+    ],
+	"wipe_distance": [
+        "2"
+    ],
+	"thumbnails": [
+		"300x300",
+        "400x300",
+        "32x32"
+	],
+    "retract_lift_below": [
+        "343"
+    ],
+	"thumbnails_format": "PNG",
+	"machine_start_gcode": "start_print  EXTRUDER=[initial_extruder] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "end_print",
+    "change_filament_gcode": "FILAMENT_CHANGE LAYER_NUM=[layer_num] NEXT_EXTRUDER=[next_extruder]",
+    "default_filament_profile": [
+		"Co Print PLA"
+	],
+    "extruder_clearance_radius": [
+        "65"
+    ],
+    "extruder_clearance_height_to_rod": [
+        "36"
+    ],
+    "extruder_clearance_height_to_lid": [
+        "140"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "max_layer_height": [
+        "0.32"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "cooling_tube_retraction": [
+        "0"
+    ],
+    "cooling_tube_length": [
+        "0"
+    ],
+    "parking_pos_retraction": [
+        "25"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "extra_loading_move": [
+        "0"
+    ],
+    "high_current_on_filament_swap": [
+        "1"
+    ],
+    
+    "z_hop_types": "Normal Lift"
+
+
+}

resources/profiles/Co Print/machine/Co Print ChromaSet.json

@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Co Print ChromaSet",
+    "model_id": "Co_Print_ChromaSet",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Co Print",
+    "bed_model": "",
+    "bed_texture": "Co_Print_ChromaSet_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Co Print PLA"
+}

resources/profiles/Co Print/machine/fdm_coprint_common.json

@@ -0,0 +1,136 @@
+{
+	"type": "machine",
+	"name": "fdm_coprint_common",
+	"from": "system",
+	"instantiation": "true",
+	"inherits": "fdm_machine_common",
+	"default_print_profile": "0.20mm Standard @Co Print ChromaSet 0.4",
+    "printer_variant": "0.4",
+	"nozzle_diameter": [
+		"0.4"
+	],
+    "retract_before_wipe": [
+        "70%"
+    ],
+	"printable_area": [
+		"0x0",
+		"350x0",
+		"350x350",
+		"0x350"
+	],
+	"printable_height": "345",
+	"gcode_flavor": "klipper",
+    "retraction_length": [
+        "1"
+    ],
+    "machine_max_speed_e": [
+        "100"
+    ],
+    "machine_max_speed_x": [
+        "500"
+    ],
+    "machine_max_speed_y": [
+        "500"
+    ],
+    "machine_max_speed_z": [
+        "20"
+    ],
+    "machine_max_acceleration_e": [
+        "2500"
+    ],
+    "machine_max_acceleration_extruding": [
+        "5000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "2500"
+    ],
+	"machine_max_acceleration_travel": [
+        "40000"
+    ],
+    "machine_max_acceleration_x": [
+        "5000"
+    ],
+    "machine_max_acceleration_y": [
+        "5000"
+    ],
+    "machine_max_acceleration_z": [
+        "500"
+    ],
+    "machine_max_jerk_e": [
+        "2.5"
+    ],
+    "machine_max_jerk_x": [
+        "10"
+    ],
+    "machine_max_jerk_y": [
+        "10"
+    ],
+    "machine_max_jerk_z": [
+        "0.2"
+    ],
+	"z_hop": [
+        "0.2"
+    ],
+	"retraction_speed": [
+        "50"
+    ],
+	"deretraction_speed": [
+        "50"
+    ],
+	"retraction_minimum_travel": [
+        "1"
+    ],
+    "retract_length_toolchange": [
+        "2"
+    ],
+	"wipe_distance": [
+        "2"
+    ],
+	"thumbnails": [
+		"300x300",
+        "400x300",
+        "32x32"
+	],
+    "retract_lift_below": [
+        "343"
+    ],
+	"thumbnails_format": "PNG",
+	"before_layer_change_gcode": "TIMELAPSE_TAKE_FRAME\nG92 E0",
+	"machine_start_gcode": "start_print  EXTRUDER=[initial_extruder] EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
+    "machine_end_gcode": "end_print",
+    "default_filament_profile": [
+		"Co Print PLA"
+	],
+    "extruder_clearance_radius": [
+        "65"
+    ],
+    "extruder_clearance_height_to_rod": [
+        "36"
+    ],
+    "extruder_clearance_height_to_lid": [
+        "36"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "max_layer_height": [
+        "0.32"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "cooling_tube_retraction": [
+        "0"
+    ],
+    "cooling_tube_length": [
+        "0"
+    ],
+    "parking_pos_retraction": [
+        "10"
+    ],
+    "extra_loading_move": [
+        "0"
+    ]
+
+
+}

resources/profiles/Co Print/machine/fdm_machine_common.json

@@ -0,0 +1,112 @@
+{
+    "type": "machine",
+    "name": "fdm_machine_common",
+    "from": "system",
+    "instantiation": "false",
+    "printer_technology": "FFF",
+    "deretraction_speed": [
+        "50"
+    ],
+    "extruder_colour": [
+        "#FCE94F"
+    ],
+    "extruder_offset": [
+        "0x0"
+    ],
+    "gcode_flavor": "klipper",
+    "silent_mode": "0",
+    "machine_max_acceleration_e": [
+        "5000"
+    ],
+    "machine_max_acceleration_extruding": [
+        "10000"
+    ],
+    "machine_max_acceleration_retracting": [
+        "1000"
+    ],
+    "machine_max_acceleration_x": [
+        "10000"
+    ],
+    "machine_max_acceleration_y": [
+        "10000"
+    ],
+    "machine_max_acceleration_z": [
+        "500"
+    ],
+    "machine_max_speed_e": [
+        "60"
+    ],
+    "machine_max_speed_x": [
+        "500"
+    ],
+    "machine_max_speed_y": [
+        "500"
+    ],
+    "machine_max_speed_z": [
+        "10"
+    ],
+    "machine_max_jerk_e": [
+        "5"
+    ],
+    "machine_max_jerk_x": [
+        "8"
+    ],
+    "machine_max_jerk_y": [
+        "8"
+    ],
+    "machine_max_jerk_z": [
+        "0.4"
+    ],
+    "machine_min_extruding_rate": [
+        "0"
+    ],
+    "machine_min_travel_rate": [
+        "0"
+    ],
+    "max_layer_height": [
+        "0.32"
+    ],
+    "min_layer_height": [
+        "0.08"
+    ],
+    "printable_height": "250",
+    "extruder_clearance_radius": "65",
+    "extruder_clearance_height_to_rod": "36",
+    "extruder_clearance_height_to_lid": "140",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_settings_id": "",
+    "printer_variant": "0.4",
+    "retraction_minimum_travel": [
+        "2"
+    ],
+    "retract_before_wipe": [
+        "70%"
+    ],
+    "retract_when_changing_layer": [
+        "1"
+    ],
+    "retraction_length": [
+        "1"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "z_hop": [
+        "0"
+    ],
+    "retract_restart_extra": [
+        "0"
+    ],
+    "retract_restart_extra_toolchange": [
+        "0"
+    ],
+    "retraction_speed": [
+        "50"
+    ],
+    "single_extruder_multi_material": "1",
+    "wipe": [
+        "1"
+    ]
+}

resources/profiles/Co Print/process/0.2mm Fast @Co Print ChromaSet 0.4.json

@@ -0,0 +1,31 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.2mm Fast @Co Print ChromaSet 0.4",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_coprint_common",
+    "elefant_foot_compensation": "0.15",
+    "initial_layer_speed": "60",
+    "initial_layer_infill_speed": "100",
+    "inner_wall_speed": "300",
+    "small_perimeter_speed": "50%",
+    "internal_solid_infill_speed": "300",
+    "travel_speed": "500",
+    "gap_infill_speed": "300",
+    "outer_wall_speed":"100",
+    "top_surface_speed": "150",
+    "default_acceleration": "10000",
+    "outer_wall_acceleration": "3000",
+    "inner_wall_acceleration": "8000",
+    "bridge_acceleration": "80%",
+    "sparse_infill_acceleration": "80%",
+    "initial_layer_acceleration": "1500",
+    "internal_solid_infill_acceleration": "80%",
+    "top_surface_acceleration": "2000",
+    "travel_acceleration": "10000",
+    "default_jerk": "9",
+    "compatible_printers": [
+        "Co Print ChromaSet 0.4 nozzle fast"
+    ]
+}

resources/profiles/Co Print/process/0.2mm Standard @Co Print ChromaSet 0.4.json

@@ -0,0 +1,12 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.2mm Standard @Co Print ChromaSet 0.4",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_process_coprint_common",
+    "default_acceleration": "5000",
+    "compatible_printers": [
+        "Co Print ChromaSet 0.4 nozzle"
+    ]
+}

resources/profiles/Co Print/process/fdm_process_common.json

@@ -0,0 +1,108 @@
+{
+    "type": "process",
+    "name": "fdm_process_common",
+    "from": "system",
+    "instantiation": "false",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "bridge_flow": "0.9031",
+    "bridge_speed": "25",
+    "internal_bridge_speed": "100",
+    "brim_width": "5",
+    "compatible_printers": [],
+    "print_sequence": "by layer",
+    "default_acceleration": "5000",
+    "bridge_no_support": "0",
+    "elefant_foot_compensation": "0.1",
+    "outer_wall_line_width": "0.4",
+    "outer_wall_speed": "60",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "10%",
+    "sparse_infill_pattern": "grid",
+    "initial_layer_line_width": "0.5",
+    "layer_height": "0.2",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "200",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "300",
+    "interface_shells": "0",
+    "detect_overhang_wall": "1",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}{filament_type[0]}{layer_height}_{print_time}.gcode",
+    "wall_loops": "2",
+    "inner_wall_line_width": "0.4",
+    "inner_wall_speed": "200",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_gap": "5%",
+    "skirt_distance": "4",
+    "skirt_height": "1",
+    "minimum_sparse_infill_area": "0",
+    "internal_solid_infill_line_width": "0.4",
+    "internal_solid_infill_speed": "200",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_filament": "0",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0",
+    "support_interface_loop_pattern": "0",
+    "support_interface_top_layers": "0",
+    "support_interface_spacing": "0",
+    "support_interface_speed": "200",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2",
+    "support_speed": "200",
+    "extra_perimeters_on_overhangs": "0",
+    "initial_layer_infill_speed": "100",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.5",
+    "detect_thin_wall": "1",
+    "top_surface_line_width": "0.4",
+    "top_surface_speed": "80",
+    "travel_speed": "350",
+    "enable_prime_tower": "1",
+    "prime_tower_width": "120",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "resolution": "0.012",
+    "wall_generator": "classic",
+    "wall_sequence": "inner wall/outer wall",
+    "print_flow_ratio": "1",
+    "top_shell_layers": "4",
+    "internal_bridge_flow": "0.9031",
+    "slow_down_layers": "3",
+    "gap_fill_target": "everywhere",
+    "skirt_loops": "6",
+    "skirt_speed": "50",
+    "draft_shield": "disabled",
+    "brim_type": "no_brim",
+    "exclude_object": "1",
+    "inner_wall_acceleration": "3000",
+    "top_solid_infill_flow_ratio": "1",
+    "bottom_solid_infill_flow_ratio": "1",
+    "outer_wall_acceleration": "1000",
+    "bridge_acceleration": "800%",
+    "sparse_infill_acceleration": "80%",
+    "internal_solid_infill_acceleration": "80%",
+    "infill_layer_acceleration": "1500",
+    "top_surface_acceleration": "1000",
+    "travel_acceleration": "5000",
+    "accel_to_decel_enable": "1",
+    "top_shell_thickness": "1",
+    "infill_anchor": "400%",
+	"infill_anchor_max": "20",
+    "accel_to_decel": "50%",
+    "overhang_1_4_speed": "80",
+    "overhang_2_4_speed": "50",
+    "overhang_3_4_speed": "30",
+    "overhang_4_4_speed": "10",
+    "initial_layer_acceleration": "1500"
+}

resources/profiles/Co Print/process/fdm_process_coprint_common.json

@@ -0,0 +1,114 @@
+{
+    "type": "process",
+    "name": "fdm_process_coprint_common",
+    "from": "system",
+    "instantiation": "false",
+    "inherits": "fdm_process_common",
+    "adaptive_layer_height": "0",
+    "reduce_crossing_wall": "0",
+    "bridge_flow": "0.9031",
+    "bridge_speed": "25",
+    "default_jerk": "9",
+    "infill_jerk": "12",
+    "inner_wall_jerk": "7",
+    "outer_wall_jerk": "7",
+    "wipe_speed": "60%",
+    "tree_support_wall_count": "2",
+    "role_based_wipe_speed": "0",
+    "staggered_inner_seams": "1",
+    "internal_bridge_speed": "100",
+    "brim_width": "5",
+    "layer_height": "0.2",
+    "print_sequence": "by layer",
+    "default_acceleration": "5000",
+    "bridge_no_support": "0",
+    "elefant_foot_compensation": "0.1",
+    "outer_wall_line_width": "0.4",
+    "outer_wall_speed": "60",
+    "line_width": "0.4",
+    "infill_direction": "45",
+    "sparse_infill_density": "10%",
+    "sparse_infill_pattern": "grid",
+    "initial_layer_line_width": "0.5",
+    "initial_layer_print_height": "0.2",
+    "initial_layer_speed": "60",
+    "gap_infill_speed": "200",
+    "infill_combination": "0",
+    "sparse_infill_line_width": "0.45",
+    "infill_wall_overlap": "30%",
+    "sparse_infill_speed": "300",
+    "interface_shells": "0",
+    "detect_overhang_wall": "1",
+    "reduce_infill_retraction": "1",
+    "filename_format": "{input_filename_base}{filament_type[0]}{layer_height}_{print_time}.gcode",
+    "wall_loops": "2",
+    "inner_wall_line_width": "0.4",
+    "inner_wall_speed": "200",
+    "print_settings_id": "",
+    "raft_layers": "0",
+    "seam_position": "aligned",
+    "seam_gap": "5%",
+    "skirt_distance": "4",
+    "skirt_height": "1",
+    "support_type": "tree(manual)",
+    "minimum_sparse_infill_area": "0",
+    "internal_solid_infill_line_width": "0.4",
+    "internal_solid_infill_speed": "200",
+    "spiral_mode": "0",
+    "standby_temperature_delta": "-5",
+    "enable_support": "0",
+    "support_filament": "0",
+    "support_line_width": "0.4",
+    "support_interface_filament": "0",
+    "initial_layer_infill_speed": "100",
+    "support_on_build_plate_only": "0",
+    "support_top_z_distance": "0",
+    "support_interface_loop_pattern": "0",
+    "support_interface_top_layers": "0",
+    "support_interface_spacing": "0",
+    "support_interface_speed": "200",
+    "support_base_pattern": "rectilinear",
+    "support_base_pattern_spacing": "2",
+    "support_speed": "200",
+    "support_threshold_angle": "30",
+    "support_object_xy_distance": "0.5",
+    "detect_thin_wall": "1",
+    "top_surface_line_width": "0.4",
+    "top_surface_speed": "80",
+    "travel_speed": "350",
+    "enable_prime_tower": "1",
+    "prime_tower_width": "120",
+    "xy_hole_compensation": "0",
+    "xy_contour_compensation": "0",
+    "resolution": "0.012",
+    "wall_generator": "classic",
+    "wall_sequence": "inner wall/outer wall",
+    "print_flow_ratio": "1",
+    "internal_bridge_flow": "0.9031",
+    "gap_fill_target": "everywhere",
+    "slow_down_layers": "3",
+    "top_shell_layers": "4",
+    "skirt_loops": "6",
+    "skirt_speed": "50",
+    "extra_perimeters_on_overhangs": "0",
+    "bottom_solid_infill_flow_ratio": "1",
+    "top_solid_infill_flow_ratio": "1",
+    "draft_shield": "disabled",
+    "brim_type": "no_brim",
+    "exclude_object": "1",
+    "inner_wall_acceleration": "3000",
+    "outer_wall_acceleration": "1000",
+    "bridge_acceleration": "80%",
+    "sparse_infill_acceleration": "80%",
+    "internal_solid_infill_acceleration": "80%",
+    "infill_layer_acceleration": "1500",
+    "top_surface_acceleration": "1000",
+    "travel_acceleration": "5000",
+    "accel_to_decel_enable": "1",
+    "accel_to_decel": "50%",
+    "infill_anchor": "400%",
+	"infill_anchor_max": "20",
+    "top_shell_thickness": "1",
+    "initial_layer_acceleration": "1500"
+}
+

resources/profiles/Comgrow.json

@@ -1,6 +1,6 @@
 {
 	"name": "Comgrow",
-	"version": "02.02.00.00",
+	"version": "02.02.00.01",
 	"force_update": "0",
 	"description": "Comgrow configurations",
 	"machine_model_list": [

resources/profiles/Creality.json

@@ -1,6 +1,6 @@
 {
     "name": "Creality",
-    "version": "02.02.00.00",
+    "version": "02.02.00.01",
     "force_update": "0",
     "description": "Creality configurations",
     "machine_model_list": [
@@ -24,6 +24,10 @@
             "name": "Creality CR-6 Max",
             "sub_path": "machine/Creality CR-6 Max.json"
         },
+        {
+            "name": "Creality CR-M4",
+            "sub_path": "machine/Creality CR-M4.json"
+        },
         {
             "name": "Creality Ender-3 V2",
             "sub_path": "machine/Creality Ender-3 V2.json"
@@ -107,6 +111,14 @@
         {
             "name": "Creality K1 Max",
             "sub_path": "machine/Creality K1 Max.json"
+        },
+        {
+            "name": "Creality K1 SE",
+            "sub_path": "machine/Creality K1 SE.json"
+        },
+        {
+            "name": "Creality K2 Plus",
+            "sub_path": "machine/Creality K2 Plus.json"
         }
     ],
     "process_list": [
@@ -246,6 +258,14 @@
             "name": "0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3",
             "sub_path": "process/0.08mm SuperDetail @Creality Ender5Pro (2019) 0.3.json"
         },
+        {
+            "name": "0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle",
+            "sub_path": "process/0.08mm SuperDetail @Creality K2 Plus 0.2 nozzle.json"
+        },
+        {
+            "name": "0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle",
+            "sub_path": "process/0.08mm SuperDetail @Creality K2 Plus 0.4 nozzle.json"
+        },
         {
             "name": "0.10mm HighDetail @Creality CR-6 0.4.json",
             "sub_path": "process/0.10mm HighDetail @Creality CR-6 0.4.json"
@@ -262,6 +282,14 @@
             "name": "0.10mm HighDetail @Creality Ender5Pro (2019) 0.3",
             "sub_path": "process/0.10mm HighDetail @Creality Ender5Pro (2019) 0.3.json"
         },
+        {
+            "name": "0.10mm HighDetail @Creality CR-M4",
+            "sub_path": "process/0.10mm HighDetail @Creality CR-M4.json"
+        },
+        {
+            "name": "0.10mm HighDetail @Creality K2 Plus 0.2 nozzle",
+            "sub_path": "process/0.10mm HighDetail @Creality K2 Plus 0.2 nozzle.json"
+        },
         {
             "name": "0.12mm Detail @Creality Ender3 0.2",
             "sub_path": "process/0.12mm Fine @Creality Ender3 0.2.json"
@@ -374,6 +402,26 @@
             "name": "0.12mm Detail @Creality Ender5Pro (2019) 0.5",
             "sub_path": "process/0.12mm Detail @Creality Ender5Pro (2019) 0.5.json"
         },
+        {
+            "name": "0.15mm Detail @Creality CR-M4",
+            "sub_path": "process/0.15mm Detail @Creality CR-M4.json"
+        },
+        {
+            "name": "0.12mm Detail @Creality K2 Plus 0.2 nozzle",
+            "sub_path": "process/0.12mm Detail @Creality K2 Plus 0.2 nozzle.json"
+        },
+        {
+            "name": "0.12mm Detail @Creality K2 Plus 0.4 nozzle",
+            "sub_path": "process/0.12mm Detail @Creality K2 Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "0.18mm Detail @Creality K2 Plus 0.6 nozzle",
+            "sub_path": "process/0.18mm Detail @Creality K2 Plus 0.6 nozzle.json"
+        },
+        {
+            "name": "0.24mm Detail @Creality K2 Plus 0.8 nozzle",
+            "sub_path": "process/0.24mm Detail @Creality K2 Plus 0.8 nozzle.json"
+        },
         {
             "name": "0.16mm Optimal @Creality CR10V2",
             "sub_path": "process/0.16mm Optimal @Creality CR10V2.json"
@@ -530,6 +578,22 @@
             "name": "0.16mm Optimal @Creality K1Max (0.4 nozzle)",
             "sub_path": "process/0.16mm Optimal @Creality K1Max (0.4 nozzle).json"
         },
+        {
+            "name": "0.14mm Optimal @Creality K2 Plus 0.2 nozzle",
+            "sub_path": "process/0.14mm Optimal @Creality K2 Plus 0.2 nozzle.json"
+        },
+        {
+            "name": "0.16mm Optimal @Creality K2 Plus 0.4 nozzle",
+            "sub_path": "process/0.16mm Optimal @Creality K2 Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "0.24mm Optimal @Creality K2 Plus 0.6 nozzle",
+            "sub_path": "process/0.24mm Optimal @Creality K2 Plus 0.6 nozzle.json"
+        },
+        {
+            "name": "0.32mm Optimal @Creality K2 Plus 0.8 nozzle",
+            "sub_path": "process/0.32mm Optimal @Creality K2 Plus 0.8 nozzle.json"
+        },
         {
             "name": "0.20mm Standard @Creality CR10V2",
             "sub_path": "process/0.20mm Standard @Creality CR10V2.json"
@@ -686,6 +750,10 @@
             "name": "0.20mm Standard @Creality Ender6",
             "sub_path": "process/0.20mm Standard @Creality Ender6.json"
         },
+        {
+            "name": "0.20mm Standard @Creality CR-M4",
+            "sub_path": "process/0.20mm Standard @Creality CR-M4.json"
+        },
         {
             "name": "0.20mm Standard @Creality K1 (0.4 nozzle)",
             "sub_path": "process/0.20mm Standard @Creality K1 (0.4 nozzle).json"
@@ -698,6 +766,22 @@
             "name": "0.20mm Standard @Creality K1Max (0.4 nozzle)",
             "sub_path": "process/0.20mm Standard @Creality K1Max (0.4 nozzle).json"
         },
+        {
+            "name": "0.20mm Standard @Creality K2 Plus 0.4 nozzle",
+            "sub_path": "process/0.20mm Standard @Creality K2 Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "0.30mm Standard @Creality K2 Plus 0.6 nozzle",
+            "sub_path": "process/0.30mm Standard @Creality K2 Plus 0.6 nozzle.json"
+        },
+        {
+            "name": "0.40mm Standard @Creality K2 Plus 0.8 nozzle",
+            "sub_path": "process/0.40mm Standard @Creality K2 Plus 0.8 nozzle.json"
+        },
+        {
+            "name": "0.20mm Fast @Creality K1 SE 0.4",
+            "sub_path": "process/0.20mm Fast @Creality K1 SE 0.4.json"
+        },
         {
             "name": "0.24mm Draft @Creality Ender3 0.2",
             "sub_path": "process/0.24mm Draft @Creality Ender3 0.2.json"
@@ -826,6 +910,18 @@
             "name": "0.24mm Draft @Creality Ender5Pro (2019) 0.8",
             "sub_path": "process/0.24mm Draft @Creality Ender5Pro (2019) 0.8.json"
         },
+        {
+            "name": "0.24mm Draft @Creality K2 Plus 0.4 nozzle",
+            "sub_path": "process/0.24mm Draft @Creality K2 Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "0.36mm Draft @Creality K2 Plus 0.6 nozzle",
+            "sub_path": "process/0.36mm Draft @Creality K2 Plus 0.6 nozzle.json"
+        },
+        {
+            "name": "0.48mm Draft @Creality K2 Plus 0.8 nozzle",
+            "sub_path": "process/0.48mm Draft @Creality K2 Plus 0.8 nozzle.json"
+        },
         {
             "name": "0.28mm SuperDraft @Creality Ender3 0.2",
             "sub_path": "process/0.28mm SuperDraft @Creality Ender3 0.2.json"
@@ -882,6 +978,18 @@
             "name": "0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0",
             "sub_path": "process/0.28mm SuperDraft @Creality Ender5Pro (2019) 1.0.json"
         },
+        {
+            "name": "0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle",
+            "sub_path": "process/0.28mm SuperDraft @Creality K2 Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle",
+            "sub_path": "process/0.42mm SuperDraft @Creality K2 Plus 0.6 nozzle.json"
+        },
+        {
+            "name": "0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle",
+            "sub_path": "process/0.56mm SuperDraft @Creality K2 Plus 0.8 nozzle.json"
+        },
         {
             "name": "0.32mm Chunky @Creality CR-6 0.6",
             "sub_path": "process/0.32mm Chunky @Creality CR-6 0.6.json"
@@ -1179,6 +1287,46 @@
         {
             "name": "Creality Generic TPU @K1-all",
             "sub_path": "filament/Creality Generic TPU @K1-all.json"
+        },
+        {
+            "name": "Creality Generic ABS @K2-all",
+            "sub_path": "filament/Creality Generic ABS @K2-all.json"
+        },
+        {
+            "name": "Creality Generic ASA @K2-all",
+            "sub_path": "filament/Creality Generic ASA @K2-all.json"
+        },
+        {
+            "name": "Creality Generic PETG @K2-all",
+            "sub_path": "filament/Creality Generic PETG @K2-all.json"
+        },
+        {
+            "name": "Creality Generic PLA @K2-all",
+            "sub_path": "filament/Creality Generic PLA @K2-all.json"
+        },
+        {
+            "name": "Creality Generic PLA High Speed @K2-all",
+            "sub_path": "filament/Creality Generic PLA High Speed @K2-all.json"
+        },
+        {
+            "name": "Creality Generic PLA Matte @K2-all",
+            "sub_path": "filament/Creality Generic PLA Matte @K2-all.json"
+        },
+        {
+            "name": "Creality Generic PLA Silk @K2-all",
+            "sub_path": "filament/Creality Generic PLA Silk @K2-all.json"
+        },
+        {
+            "name": "Creality Generic TPU @K2-all",
+            "sub_path": "filament/Creality Generic TPU @K2-all.json"
+        },
+        {
+            "name": "Creality Generic PLA-CF @K2-all",
+            "sub_path": "filament/Creality Generic PLA-CF @K2-all.json"
+        },
+        {
+            "name": "Creality Generic PA-CF @K2-all",
+            "sub_path": "filament/Creality Generic PA-CF @K2-all.json"
         }
     ],
     "machine_list": [
@@ -1250,6 +1398,10 @@
             "name": "Creality CR-6 Max 0.8 nozzle",
             "sub_path": "machine/Creality CR-6 Max 0.8 nozzle.json"
         },
+        {
+            "name": "Creality CR-M4 0.4 nozzle",
+            "sub_path": "machine/Creality CR-M4 0.4 nozzle.json"
+        },
         {
             "name": "Creality Ender-3 V2 0.4 nozzle",
             "sub_path": "machine/Creality Ender-3 V2 0.4 nozzle.json"
@@ -1426,6 +1578,10 @@
             "name": "Creality K1C 0.8 nozzle",
             "sub_path": "machine/Creality K1C 0.8 nozzle.json"
         },
+        {
+            "name": "Creality K1 SE 0.4 nozzle",
+            "sub_path": "machine/Creality K1 SE 0.4 nozzle.json"
+        },
         {
             "name": "Creality K1 Max (0.4 nozzle)",
             "sub_path": "machine/Creality K1 Max (0.4 nozzle).json"
@@ -1437,6 +1593,22 @@
         {
             "name": "Creality K1 Max (0.8 nozzle)",
             "sub_path": "machine/Creality K1 Max (0.8 nozzle).json"
+        },
+        {
+            "name": "Creality K2 Plus 0.2 nozzle",
+            "sub_path": "machine/Creality K2 Plus 0.2 nozzle.json"
+        },
+        {
+            "name": "Creality K2 Plus 0.4 nozzle",
+            "sub_path": "machine/Creality K2 Plus 0.4 nozzle.json"
+        },
+        {
+            "name": "Creality K2 Plus 0.6 nozzle",
+            "sub_path": "machine/Creality K2 Plus 0.6 nozzle.json"
+        },
+        {
+            "name": "Creality K2 Plus 0.8 nozzle",
+            "sub_path": "machine/Creality K2 Plus 0.8 nozzle.json"
         }
     ]
 }

resources/profiles/Creality/filament/Creality Generic ABS @K1-all.json

@@ -17,6 +17,7 @@
     "compatible_printers": [
         "Creality K1C 0.4 nozzle",
         "Creality K1C 0.6 nozzle",
-        "Creality K1C 0.8 nozzle"
+        "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle"
     ]
 }

resources/profiles/Creality/filament/Creality Generic ABS @K2-all.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "setting_id": "GFSA04_CREALITY_00",
+    "name": "Creality Generic ABS @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic ABS",
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "slow_down_layer_time": [
+        "12"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}

resources/profiles/Creality/filament/Creality Generic ABS.json

@@ -58,6 +58,7 @@
 		"Creality CR-10 SE 0.2 nozzle",
 		"Creality CR-10 SE 0.4 nozzle",
 		"Creality CR-10 SE 0.6 nozzle",
-		"Creality CR-10 SE 0.8 nozzle"
+		"Creality CR-10 SE 0.8 nozzle",
+		"Creality CR-M4 0.4 nozzle"
 	]
 }

resources/profiles/Creality/filament/Creality Generic ASA @K1-all.json

@@ -17,6 +17,7 @@
     "compatible_printers": [
         "Creality K1C 0.4 nozzle",
         "Creality K1C 0.6 nozzle",
-        "Creality K1C 0.8 nozzle"
+        "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle"
     ]
 }

resources/profiles/Creality/filament/Creality Generic ASA @K2-all.json

@@ -0,0 +1,26 @@
+{
+    "type": "filament",
+    "setting_id": "GFSA04_00",
+    "name": "Creality Generic ASA @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic ASA",
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "14"
+    ],
+    "slow_down_layer_time": [
+        "10"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "compatible_printers": [
+        "Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}

resources/profiles/Creality/filament/Creality Generic PA-CF @K1-all.json

@@ -12,6 +12,7 @@
         "Creality K1C 0.4 nozzle",
         "Creality K1C 0.6 nozzle",
         "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle",
         "Creality K1 Max (0.4 nozzle)",
         "Creality K1 Max (0.6 nozzle)",
         "Creality K1 Max (0.8 nozzle)"

resources/profiles/Creality/filament/Creality Generic PA-CF @K2-all.json

@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "name": "Creality Generic PA-CF @K2-all",
+    "inherits": "Creality Generic PA-CF",
+    "from": "system",
+    "setting_id": "GFSN99_01",
+    "instantiation": "true",
+    "nozzle_temperature_initial_layer": [
+        "280"
+    ],
+    "nozzle_temperature": [
+        "280"
+    ],
+    "fan_min_speed": [
+        "30"
+    ],
+    "compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}

resources/profiles/Creality/filament/Creality Generic PC @K1-all.json

@@ -15,6 +15,7 @@
         "Creality K1C 0.4 nozzle",
         "Creality K1C 0.6 nozzle",
         "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle",
         "Creality K1 Max (0.4 nozzle)",
         "Creality K1 Max (0.6 nozzle)",
         "Creality K1 Max (0.8 nozzle)"

resources/profiles/Creality/filament/Creality Generic PETG @K1-all.json

@@ -50,6 +50,7 @@
     "compatible_printers": [
         "Creality K1C 0.4 nozzle",
         "Creality K1C 0.6 nozzle",
-        "Creality K1C 0.8 nozzle"
+        "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle"
     ]
 }

resources/profiles/Creality/filament/Creality Generic PETG @K2-all.json

@@ -0,0 +1,59 @@
+{
+    "type": "filament",
+    "setting_id": "GFSG99_00",
+    "name": "Creality Generic PETG @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PETG",
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "cool_plate_temp": [
+        "70"
+    ],
+    "eng_plate_temp": [
+        "50"
+    ],
+    "hot_plate_temp": [
+        "70"
+    ],
+    "textured_plate_temp": [
+        "70"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "70"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "0"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "70"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "70"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+    ],
+    "nozzle_temperature": [
+        "250"
+    ],
+    "fan_max_speed": [
+        "80"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "compatible_printers": [
+        "Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}

resources/profiles/Creality/filament/Creality Generic PETG.json

@@ -68,6 +68,7 @@
 		"Creality CR-10 SE 0.2 nozzle",
 		"Creality CR-10 SE 0.4 nozzle",
 		"Creality CR-10 SE 0.6 nozzle",
-		"Creality CR-10 SE 0.8 nozzle"		
+		"Creality CR-10 SE 0.8 nozzle",
+		"Creality CR-M4 0.4 nozzle"
 	]
 }

resources/profiles/Creality/filament/Creality Generic PLA @K1-all.json

@@ -41,6 +41,7 @@
     "compatible_printers": [
         "Creality K1C 0.4 nozzle",
         "Creality K1C 0.6 nozzle",
-        "Creality K1C 0.8 nozzle"
+        "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle"
     ]
 }

resources/profiles/Creality/filament/Creality Generic PLA @K2-all.json

@@ -0,0 +1,53 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL99_00",
+    "name": "Creality Generic PLA @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA",
+    "filament_flow_ratio": [
+        "0.95"
+    ],
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "slow_down_min_speed": [
+        "20"
+    ],
+    "slow_down_layer_time": [
+        "4"
+    ],
+    "cool_plate_temp": [
+        "50"
+    ],
+    "eng_plate_temp": [
+        "50"
+    ],
+    "hot_plate_temp": [
+        "50"
+    ],
+    "textured_plate_temp": [
+        "50"
+    ],
+    "cool_plate_temp_initial_layer": [
+        "50"
+    ],
+    "eng_plate_temp_initial_layer": [
+        "50"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "50"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "50"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "compatible_printers": [
+        "Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}

resources/profiles/Creality/filament/Creality Generic PLA High Speed @K1-all.json

@@ -15,6 +15,7 @@
         "Creality K1C 0.4 nozzle",
         "Creality K1C 0.6 nozzle",
         "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle",
 		"Creality K1 Max (0.4 nozzle)",
 		"Creality K1 Max (0.6 nozzle)",
 		"Creality K1 Max (0.8 nozzle)"

resources/profiles/Creality/filament/Creality Generic PLA High Speed @K2-all.json

@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL95_00",
+    "name": "Creality Generic PLA High Speed @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA @K2-all",
+    "filament_max_volumetric_speed": [
+        "23"
+    ],
+    "compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}

resources/profiles/Creality/filament/Creality Generic PLA Matte @K1-all.json

@@ -15,6 +15,7 @@
         "Creality K1C 0.4 nozzle",
         "Creality K1C 0.6 nozzle",
         "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle",
 		"Creality K1 Max (0.4 nozzle)",
 		"Creality K1 Max (0.6 nozzle)",
 		"Creality K1 Max (0.8 nozzle)"

resources/profiles/Creality/filament/Creality Generic PLA Matte @K2-all.json

@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL05_00",
+    "name": "Creality Generic PLA Matte @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA @K2-all",
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}

resources/profiles/Creality/filament/Creality Generic PLA Silk @K1-all.json

@@ -15,6 +15,7 @@
         "Creality K1C 0.4 nozzle",
         "Creality K1C 0.6 nozzle",
         "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle",
 		"Creality K1 Max (0.4 nozzle)",
 		"Creality K1 Max (0.6 nozzle)",
 		"Creality K1 Max (0.8 nozzle)"

resources/profiles/Creality/filament/Creality Generic PLA Silk @K2-all.json

@@ -0,0 +1,17 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL96_00",
+    "name": "Creality Generic PLA Silk @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA @K2-all",
+    "filament_max_volumetric_speed": [
+        "10"
+    ],
+    "compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}

resources/profiles/Creality/filament/Creality Generic PLA-CF @K1-all.json

@@ -15,6 +15,7 @@
         "Creality K1C 0.4 nozzle",
         "Creality K1C 0.6 nozzle",
         "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle",
         "Creality K1 Max (0.4 nozzle)",
         "Creality K1 Max (0.6 nozzle)",
         "Creality K1 Max (0.8 nozzle)"

resources/profiles/Creality/filament/Creality Generic PLA-CF @K2-all.json

@@ -0,0 +1,23 @@
+{
+    "type": "filament",
+    "setting_id": "GFSL96_00",
+    "name": "Creality Generic PLA-CF @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic PLA-CF",
+    "filament_max_volumetric_speed": [
+        "18"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "additional_cooling_fan_speed": [
+        "0"
+    ],
+    "compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}

resources/profiles/Creality/filament/Creality Generic PLA.json

@@ -59,6 +59,7 @@
 		"Creality CR-10 SE 0.2 nozzle",
 		"Creality CR-10 SE 0.4 nozzle",
 		"Creality CR-10 SE 0.6 nozzle",
-		"Creality CR-10 SE 0.8 nozzle"
+		"Creality CR-10 SE 0.8 nozzle",
+		"Creality CR-M4 0.4 nozzle"
 	]
 }

resources/profiles/Creality/filament/Creality Generic TPU @K1-all.json

@@ -35,6 +35,7 @@
     "compatible_printers": [
         "Creality K1C 0.4 nozzle",
         "Creality K1C 0.6 nozzle",
-        "Creality K1C 0.8 nozzle"
+        "Creality K1C 0.8 nozzle",
+        "Creality K1 SE 0.4 nozzle"
     ]
 }

resources/profiles/Creality/filament/Creality Generic TPU @K2-all.json

@@ -0,0 +1,41 @@
+{
+    "type": "filament",
+    "setting_id": "GFU99_CREALITY_00",
+    "name": "Creality Generic TPU @K2-all",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "Creality Generic TPU",
+    "hot_plate_temp": [
+        "40"
+    ],
+    "hot_plate_temp_initial_layer": [
+        "40"
+    ],
+    "textured_plate_temp": [
+        "40"
+    ],
+    "textured_plate_temp_initial_layer": [
+        "40"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "220"
+    ],
+    "nozzle_temperature": [
+        "220"
+    ],
+    "filament_max_volumetric_speed": [
+        "3"
+    ],
+    "slow_down_layer_time": [
+        "8"
+    ],
+    "reduce_fan_stop_start_freq": [
+        "1"
+    ],
+    "compatible_printers": [
+		"Creality K2 Plus 0.2 nozzle",
+        "Creality K2 Plus 0.4 nozzle",
+        "Creality K2 Plus 0.6 nozzle",
+        "Creality K2 Plus 0.8 nozzle"
+    ]
+}

resources/profiles/Creality/filament/Creality Generic TPU.json

@@ -16,7 +16,7 @@
         "Creality K1 Max (0.4 nozzle)",
         "Creality K1 Max (0.6 nozzle)",
         "Creality K1 Max (0.8 nozzle)",
-	"Creality Sermoon V1 0.4 nozzle",
+	    "Creality Sermoon V1 0.4 nozzle",
         "Creality CR-10 SE 0.2 nozzle",
 		"Creality CR-10 SE 0.4 nozzle",
 		"Creality CR-10 SE 0.6 nozzle",

resources/profiles/Creality/machine/Creality CR-M4 0.4 nozzle.json

@@ -0,0 +1,54 @@
+{
+  "type": "machine",
+  "setting_id": "GM001",
+  "name": "Creality CR-M4 0.4 nozzle",
+  "from": "system",
+  "instantiation": "true",
+  "inherits": "fdm_creality_common",
+  "printer_model": "Creality CR-M4",
+  "gcode_flavor": "marlin",
+  "printer_structure": "i3",
+  "default_filament_profile": [
+    "Creality Generic PLA"
+  ],
+  "default_print_profile": "0.20mm Standard @Creality CR-M4",
+  "nozzle_diameter": [
+    "0.4"
+  ],
+  "printable_height": "470",
+  "printable_area": [
+    "0x0",
+    "450x0",
+    "450x450",
+    "0x450"
+  ],
+  "machine_max_speed_e": [
+    "50",
+    "50"
+  ],
+  "machine_max_acceleration_z": [
+    "100",
+    "100"
+  ],
+  "machine_max_jerk_x": [
+    "10",
+    "10"
+  ],
+  "machine_max_jerk_y": [
+    "10",
+    "10"
+  ],
+  "retraction_minimum_travel": [
+    "0.8"
+  ],
+  "retraction_length": [
+    "0.8"
+  ],
+  "retraction_speed": [
+    "40"
+  ],
+  "nozzle_type": "undefine",
+  "auxiliary_fan": "0",
+  "machine_start_gcode": "M220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG28 ;Home\nG92 E0 ;Reset Extruder\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S[material_print_temperature_layer_0]\nG1 X10.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y145.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0  ;Reset Extruder\nG1 E-1.0000 F1800 ;Retract a bit\nG1 Z2.0 F3000 ;Move Z Axis up\nG1 E0.0000 F1800 ",
+  "machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-2 Z0.2 F2400 ;Retract and raise Z\nG1 X5 Y5 F3000 ;Wipe out\nG1 Z10 ;Raise Z more\nG90 ;Absolute positionning\nG1 X0 Y0 ;Present print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z"
+}

resources/profiles/Creality/machine/Creality CR-M4.json

@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "Creality CR-M4",
+    "model_id": "Creality-CR-M4",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "Creality",
+    "bed_model": "creality_crm4_buildplate_model.stl",
+    "bed_texture": "creality_crm4_buildplate_texture.png",
+    "hotend_model": "",
+    "default_materials": "Creality Generic PLA;Creality Generic PETG;Creality Generic ABS"
+}