bump version to 2.1.1

* Fixed typo "Internel error"

* Revert french translation

.github/workflows/build_all.yml

@@ -49,9 +49,9 @@ jobs:
         include:
           - os: ubuntu-20.04
           - os: windows-latest
-          - os: macos-12
+          - os: macos-14
             arch: x86_64
-          - os: macos-12
+          - os: macos-14
             arch: arm64
     uses: ./.github/workflows/build_check_cache.yml
     with:

.github/workflows/build_check_cache.yml

@@ -30,12 +30,12 @@ jobs:
       - name: set outputs
         id: set_outputs
         env:
-          underscore-arch: ${{ inputs.os == 'macos-12' && '_' || ''}}${{ inputs.os == 'macos-12' && inputs.arch || '' }} # if is macos, make a string that does "_{arch}", else output nothing
-          dash-arch: ${{ inputs.os == 'macos-12' && '-' || ''}}${{ inputs.os == 'macos-12' && inputs.arch || '' }} # if is macos, make a string that does "-{arch}", else output nothing
-          dep-folder-name: ${{ (inputs.os == 'windows-latest' || inputs.os == 'macos-12') && 'OrcaSlicer_dep' || 'destdir' }}
+          underscore-arch: ${{ inputs.os == 'macos-14' && '_' || ''}}${{ inputs.os == 'macos-14' && inputs.arch || '' }} # if is macos, make a string that does "_{arch}", else output nothing
+          dash-arch: ${{ inputs.os == 'macos-14' && '-' || ''}}${{ inputs.os == 'macos-14' && inputs.arch || '' }} # if is macos, make a string that does "-{arch}", else output nothing
+          dep-folder-name: ${{ (inputs.os == 'windows-latest' || inputs.os == 'macos-14') && 'OrcaSlicer_dep' || 'destdir' }}
           output-cmd: ${{ inputs.os == 'windows-latest' && '$env:GITHUB_OUTPUT' || '"$GITHUB_OUTPUT"'}}
         run: |
-          echo cache-key=${{ runner.os }}${{ env.dash-arch }}-cache-orcaslicer_deps-build-${{ hashFiles('deps/**') }} >> ${{ env.output-cmd }}
+          echo cache-key=${{ inputs.os }}${{ env.dash-arch }}-cache-orcaslicer_deps-build-${{ hashFiles('deps/**') }} >> ${{ env.output-cmd }}
           echo cache-path=${{ github.workspace }}/deps/build${{ env.underscore-arch }}/${{ env.dep-folder-name }}${{ env.underscore-arch }} >> ${{ env.output-cmd }}
             
       - name: load cache

.github/workflows/build_deps.yml

@@ -69,15 +69,16 @@ jobs:
             cd ${{ github.workspace }}/deps/build
 
       - name: Build on Mac ${{ inputs.arch }}
-        if: inputs.os == 'macos-12'
+        if: inputs.os == 'macos-14'
         working-directory: ${{ github.workspace }}
         run: |
-            brew install cmake git gettext automake texinfo ninja
+            brew install cmake
+            brew install automake texinfo ninja libtool
             brew list
             mkdir -p ${{ github.workspace }}/deps/build_${{ inputs.arch }}
             mkdir -p ${{ github.workspace }}/deps/build_${{ inputs.arch }}/OrcaSlicer_dep_${{ inputs.arch }}
             brew uninstall --ignore-dependencies zstd
-            ./build_release_macos.sh -dpx -a ${{ inputs.arch }} -t 10.15
+            ./build_release_macos.sh -dpx -a ${{ inputs.arch }} -t 10.15 -1
             brew install zstd
 
 
@@ -102,7 +103,7 @@ jobs:
 
       # Upload Artifacts
       - name: Upload Mac ${{ inputs.arch }} artifacts
-        if: inputs.os == 'macos-12'
+        if: inputs.os == 'macos-14'
         uses: actions/upload-artifact@v4
         with:
           name: OrcaSlicer_dep_mac_${{ inputs.arch }}_${{ env.date }}

.github/workflows/build_orca.yml

@@ -75,23 +75,24 @@ jobs:
 
 #   Mac
       - name: Install tools mac
-        if: inputs.os == 'macos-12'
+        if: inputs.os == 'macos-14'
         run: |
-          brew install cmake git gettext tree ninja
+          brew install cmake
+          brew install tree ninja libtool
           brew list
           mkdir -p ${{ github.workspace }}/deps/build_${{inputs.arch}}
           mkdir -p ${{ github.workspace }}/deps/build_${{inputs.arch}}/OrcaSlicer_dep_${{inputs.arch}}
           tree ${{ github.workspace }}/deps/build_${{inputs.arch}}/OrcaSlicer_dep_${{inputs.arch}}
 
       - name: Build slicer mac
-        if: inputs.os == 'macos-12'
+        if: inputs.os == 'macos-14'
         working-directory: ${{ github.workspace }}
         run: |
-          ./build_release_macos.sh -s -n -x -a ${{inputs.arch}} -t 10.15
+          ./build_release_macos.sh -s -n -x -a ${{inputs.arch}} -t 10.15 -1
 
  # Thanks to RaySajuuk, it's working now
       - name: Sign app and notary
-        if: (github.ref == 'refs/heads/main' || startsWith(github.ref, 'refs/heads/release/')) && inputs.os == 'macos-12'
+        if: (github.ref == 'refs/heads/main' || startsWith(github.ref, 'refs/heads/release/')) && inputs.os == 'macos-14'
         working-directory: ${{ github.workspace }}
         env:
           BUILD_CERTIFICATE_BASE64: ${{ secrets.BUILD_CERTIFICATE_BASE64 }}
@@ -117,21 +118,21 @@ jobs:
           xcrun stapler staple OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}.dmg
 
       - name: Create DMG without notary
-        if: github.ref != 'refs/heads/main' && inputs.os == 'macos-12'
+        if: github.ref != 'refs/heads/main' && inputs.os == 'macos-14'
         working-directory: ${{ github.workspace }}
         run: |
           ln -s /Applications ${{ github.workspace }}/build_${{inputs.arch}}/OrcaSlicer/Applications
           hdiutil create -volname "OrcaSlicer" -srcfolder ${{ github.workspace }}/build_${{inputs.arch}}/OrcaSlicer -ov -format UDZO OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}.dmg
 
       - name: Upload artifacts mac
-        if: inputs.os == 'macos-12'
+        if: inputs.os == 'macos-14'
         uses: actions/upload-artifact@v4
         with:
           name: OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}
           path: ${{ github.workspace }}/OrcaSlicer_Mac_${{inputs.arch}}_${{ env.ver }}.dmg
 
       - name: Deploy Mac release
-        if: github.ref == 'refs/heads/main' && inputs.os == 'macos-12'
+        if: github.ref == 'refs/heads/main' && inputs.os == 'macos-14'
         uses: WebFreak001/deploy-nightly@v3.1.0
         with:
           upload_url: https://uploads.github.com/repos/SoftFever/OrcaSlicer/releases/137995723/assets{?name,label}

build_release_macos.sh

@@ -34,6 +34,9 @@ while getopts ":dpa:snt:xbc:h" opt; do
     c )
         export BUILD_CONFIG="$OPTARG"
         ;;
+    1 )
+        export CMAKE_BUILD_PARALLEL_LEVEL=1
+        ;;
     h ) echo "Usage: ./build_release_macos.sh [-d]"
         echo "   -d: Build deps only"
         echo "   -a: Set ARCHITECTURE (arm64 or x86_64)"
@@ -43,6 +46,7 @@ while getopts ":dpa:snt:xbc:h" opt; do
         echo "   -x: Use Ninja CMake generator, default is Xcode"
         echo "   -b: Build without reconfiguring CMake"
         echo "   -c: Set CMake build configuration, default is Release"
+        echo "   -1: Use single job for building"
         exit 0
         ;;
     * )

localization/i18n/OrcaSlicer.pot

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-06-16 23:01+0800\n"
+"POT-Creation-Date: 2024-06-21 20:03+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -13164,6 +13164,9 @@ msgstr ""
 msgid "PETG"
 msgstr ""
 
+msgid "PCTG"
+msgstr ""
+
 msgid "TPU"
 msgstr ""
 
@@ -13248,6 +13251,9 @@ msgstr ""
 msgid "Upload to storage"
 msgstr ""
 
+msgid "Switch to Device tab after upload."
+msgstr ""
+
 #, possible-c-format, possible-boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr ""
@@ -13851,6 +13857,12 @@ msgstr ""
 msgid "Refresh Printers"
 msgstr ""
 
+msgid "View print host webui in Device tab"
+msgstr ""
+
+msgid "Replace the BambuLab's device tab with print host webui"
+msgstr ""
+
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
 "signed certificate."
@@ -14182,17 +14194,15 @@ msgstr ""
 msgid "Could not connect to SimplyPrint"
 msgstr ""
 
-msgid "SimplyPrint account not linked. Go to Connect options to set it up."
-msgstr ""
-
-msgid ""
-"File size exceeds the 100MB upload limit. Please upload your file through "
-"the panel."
+msgid "Internal error"
 msgstr ""
 
 msgid "Unknown error"
 msgstr ""
 
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
 msgid "Connection to Flashforge works correctly."
 msgstr ""
 
@@ -14210,151 +14220,151 @@ msgstr ""
 
 msgid "User cancelled."
 msgstr ""
-
-#: resources/data/hints.ini: [hint:Precise wall]
-msgid "Precise wall\nDid you know that turning on precise wall can improve precision and layer consistency?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Sandwich mode]
-msgid "Sandwich mode\nDid you know that you can use sandwich mode (inner-outer-inner) to improve precision and layer consistency if your model doesn't have very steep overhangs?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Chamber temperature]
-msgid "Chamber temperature\nDid you know that OrcaSlicer supports chamber temperature?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Calibration]
-msgid "Calibration\nDid you know that calibrating your printer can do wonders? Check out our beloved calibration solution in OrcaSlicer."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Auxiliary fan]
-msgid "Auxiliary fan\nDid you know that OrcaSlicer supports Auxiliary part cooling fan?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Air filtration]
-msgid "Air filtration/Exhaust Fan\nDid you know that OrcaSlicer can support Air filtration/Exhaust Fan?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:G-code window]
-msgid "G-code window\nYou can turn on/off the G-code window by pressing the <b>C</b> key."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Switch workspaces]
-msgid "Switch workspaces\nYou can switch between <b>Prepare</b> and <b>Preview</b> workspaces by pressing the <b>Tab</b> key."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:How to use keyboard shortcuts]
-msgid "How to use keyboard shortcuts\nDid you know that Orca Slicer offers a wide range of keyboard shortcuts and 3D scene operations."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Reverse on odd]
-msgid "Reverse on odd\nDid you know that <b>Reverse on odd</b> feature can significantly improve the surface quality of your overhangs?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Cut Tool]
-msgid "Cut Tool\nDid you know that you can cut a model at any angle and position with the cutting tool?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Fix Model]
-msgid "Fix Model\nDid you know that you can fix a corrupted 3D model to avoid a lot of slicing problems on the Windows system?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Timelapse]
-msgid "Timelapse\nDid you know that you can generate a timelapse video during each print?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Auto-Arrange]
-msgid "Auto-Arrange\nDid you know that you can auto-arrange all objects in your project?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Auto-Orient]
-msgid "Auto-Orient\nDid you know that you can rotate objects to an optimal orientation for printing by a simple click?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Lay on Face]
-msgid "Lay on Face\nDid you know that you can quickly orient a model so that one of its faces sits on the print bed? Select the \"Place on face\" function or press the <b>F</b> key."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Object List]
-msgid "Object List\nDid you know that you can view all objects/parts in a list and change settings for each object/part?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Search Functionality]
-msgid "Search Functionality\nDid you know that you use the Search tool to quickly find a specific Orca Slicer setting?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Simplify Model]
-msgid "Simplify Model\nDid you know that you can reduce the number of triangles in a mesh using the Simplify mesh feature? Right-click the model and select Simplify model."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Slicing Parameter Table]
-msgid "Slicing Parameter Table\nDid you know that you can view all objects/parts on a table and change settings for each object/part?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Split to Objects/Parts]
-msgid "Split to Objects/Parts\nDid you know that you can split a big object into small ones for easy colorizing or printing?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Subtract a Part]
-msgid "Subtract a Part\nDid you know that you can subtract one mesh from another using the Negative part modifier? That way you can, for example, create easily resizable holes directly in Orca Slicer."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:STEP]
-msgid "STEP\nDid you know that you can improve your print quality by slicing a STEP file instead of an STL?\nOrca Slicer supports slicing STEP files, providing smoother results than a lower resolution STL. Give it a try!"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Z seam location]
-msgid "Z seam location\nDid you know that you can customize the location of the Z seam, and even paint it on your print, to have it in a less visible location? This improves the overall look of your model. Check it out!"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Fine-tuning for flow rate]
-msgid "Fine-tuning for flow rate\nDid you know that flow rate can be fine-tuned for even better-looking prints? Depending on the material, you can improve the overall finish of the printed model by doing some fine-tuning."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Split your prints into plates]
-msgid "Split your prints into plates\nDid you know that you can split a model that has a lot of parts into individual plates ready to print? This will simplify the process of keeping track of all the parts."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer Height]
-msgid "Speed up your print with Adaptive Layer Height\nDid you know that you can print a model even faster, by using the Adaptive Layer Height option? Check it out!"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Support painting]
-msgid "Support painting\nDid you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Different types of supports]
-msgid "Different types of supports\nDid you know that you can choose from multiple types of supports? Tree supports work great for organic models, while saving filament and improving print speed. Check them out!"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Printing Silk Filament]
-msgid "Printing Silk Filament\nDid you know that Silk filament needs special consideration to print it successfully? Higher temperature and lower speed are always recommended for the best results."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Brim for better adhesion]
-msgid "Brim for better adhesion\nDid you know that when printing models have a small contact interface with the printing surface, it's recommended to use a brim?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Set parameters for multiple objects]
-msgid "Set parameters for multiple objects\nDid you know that you can set slicing parameters for all selected objects at one time?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Stack objects]
-msgid "Stack objects\nDid you know that you can stack objects as a whole one?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Flush into support/objects/infill]
-msgid "Flush into support/objects/infill\nDid you know that you can save the wasted filament by flushing them into support/objects/infill during filament change?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Improve strength]
-msgid "Improve strength\nDid you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?"
-msgstr ""
-
-#: resources/data/hints.ini: [hint:When need to print with the printer door opened]
-msgid "When need to print with the printer door opened\nDid you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature. More info about this in the Wiki."
-msgstr ""
-
-#: resources/data/hints.ini: [hint:Avoid warping]
-msgid "Avoid warping\nDid you know that when printing materials that are prone to warping such as ABS, appropriately increasing the heatbed temperature can reduce the probability of warping."
-msgstr ""
+
+#: resources/data/hints.ini: [hint:Precise wall]
+msgid "Precise wall\nDid you know that turning on precise wall can improve precision and layer consistency?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Sandwich mode]
+msgid "Sandwich mode\nDid you know that you can use sandwich mode (inner-outer-inner) to improve precision and layer consistency if your model doesn't have very steep overhangs?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Chamber temperature]
+msgid "Chamber temperature\nDid you know that OrcaSlicer supports chamber temperature?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Calibration]
+msgid "Calibration\nDid you know that calibrating your printer can do wonders? Check out our beloved calibration solution in OrcaSlicer."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Auxiliary fan]
+msgid "Auxiliary fan\nDid you know that OrcaSlicer supports Auxiliary part cooling fan?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Air filtration]
+msgid "Air filtration/Exhaust Fan\nDid you know that OrcaSlicer can support Air filtration/Exhaust Fan?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:G-code window]
+msgid "G-code window\nYou can turn on/off the G-code window by pressing the <b>C</b> key."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Switch workspaces]
+msgid "Switch workspaces\nYou can switch between <b>Prepare</b> and <b>Preview</b> workspaces by pressing the <b>Tab</b> key."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:How to use keyboard shortcuts]
+msgid "How to use keyboard shortcuts\nDid you know that Orca Slicer offers a wide range of keyboard shortcuts and 3D scene operations."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Reverse on odd]
+msgid "Reverse on odd\nDid you know that <b>Reverse on odd</b> feature can significantly improve the surface quality of your overhangs?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Cut Tool]
+msgid "Cut Tool\nDid you know that you can cut a model at any angle and position with the cutting tool?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Fix Model]
+msgid "Fix Model\nDid you know that you can fix a corrupted 3D model to avoid a lot of slicing problems on the Windows system?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Timelapse]
+msgid "Timelapse\nDid you know that you can generate a timelapse video during each print?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Auto-Arrange]
+msgid "Auto-Arrange\nDid you know that you can auto-arrange all objects in your project?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Auto-Orient]
+msgid "Auto-Orient\nDid you know that you can rotate objects to an optimal orientation for printing by a simple click?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Lay on Face]
+msgid "Lay on Face\nDid you know that you can quickly orient a model so that one of its faces sits on the print bed? Select the \"Place on face\" function or press the <b>F</b> key."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Object List]
+msgid "Object List\nDid you know that you can view all objects/parts in a list and change settings for each object/part?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Search Functionality]
+msgid "Search Functionality\nDid you know that you use the Search tool to quickly find a specific Orca Slicer setting?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Simplify Model]
+msgid "Simplify Model\nDid you know that you can reduce the number of triangles in a mesh using the Simplify mesh feature? Right-click the model and select Simplify model."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Slicing Parameter Table]
+msgid "Slicing Parameter Table\nDid you know that you can view all objects/parts on a table and change settings for each object/part?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Split to Objects/Parts]
+msgid "Split to Objects/Parts\nDid you know that you can split a big object into small ones for easy colorizing or printing?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Subtract a Part]
+msgid "Subtract a Part\nDid you know that you can subtract one mesh from another using the Negative part modifier? That way you can, for example, create easily resizable holes directly in Orca Slicer."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:STEP]
+msgid "STEP\nDid you know that you can improve your print quality by slicing a STEP file instead of an STL?\nOrca Slicer supports slicing STEP files, providing smoother results than a lower resolution STL. Give it a try!"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Z seam location]
+msgid "Z seam location\nDid you know that you can customize the location of the Z seam, and even paint it on your print, to have it in a less visible location? This improves the overall look of your model. Check it out!"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Fine-tuning for flow rate]
+msgid "Fine-tuning for flow rate\nDid you know that flow rate can be fine-tuned for even better-looking prints? Depending on the material, you can improve the overall finish of the printed model by doing some fine-tuning."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Split your prints into plates]
+msgid "Split your prints into plates\nDid you know that you can split a model that has a lot of parts into individual plates ready to print? This will simplify the process of keeping track of all the parts."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer Height]
+msgid "Speed up your print with Adaptive Layer Height\nDid you know that you can print a model even faster, by using the Adaptive Layer Height option? Check it out!"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Support painting]
+msgid "Support painting\nDid you know that you can paint the location of your supports? This feature makes it easy to place the support material only on the sections of the model that actually need it."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Different types of supports]
+msgid "Different types of supports\nDid you know that you can choose from multiple types of supports? Tree supports work great for organic models, while saving filament and improving print speed. Check them out!"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Printing Silk Filament]
+msgid "Printing Silk Filament\nDid you know that Silk filament needs special consideration to print it successfully? Higher temperature and lower speed are always recommended for the best results."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Brim for better adhesion]
+msgid "Brim for better adhesion\nDid you know that when printing models have a small contact interface with the printing surface, it's recommended to use a brim?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Set parameters for multiple objects]
+msgid "Set parameters for multiple objects\nDid you know that you can set slicing parameters for all selected objects at one time?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Stack objects]
+msgid "Stack objects\nDid you know that you can stack objects as a whole one?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Flush into support/objects/infill]
+msgid "Flush into support/objects/infill\nDid you know that you can save the wasted filament by flushing them into support/objects/infill during filament change?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Improve strength]
+msgid "Improve strength\nDid you know that you can use more wall loops and higher sparse infill density to improve the strength of the model?"
+msgstr ""
+
+#: resources/data/hints.ini: [hint:When need to print with the printer door opened]
+msgid "When need to print with the printer door opened\nDid you know that opening the printer door can reduce the probability of extruder/hotend clogging when printing lower temperature filament with a higher enclosure temperature. More info about this in the Wiki."
+msgstr ""
+
+#: resources/data/hints.ini: [hint:Avoid warping]
+msgid "Avoid warping\nDid you know that when printing materials that are prone to warping such as ABS, appropriately increasing the heatbed temperature can reduce the probability of warping."
+msgstr ""

localization/i18n/ca/OrcaSlicer_ca.po

@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-06-16 23:01+0800\n"
+"POT-Creation-Date: 2024-06-21 20:03+0800\n"
 "PO-Revision-Date: 2024-06-15 11:02+0200\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -15244,6 +15244,9 @@ msgstr "ABS/ASA"
 msgid "PETG"
 msgstr "PETG"
 
+msgid "PCTG"
+msgstr ""
+
 msgid "TPU"
 msgstr "TPU"
 
@@ -15341,6 +15344,9 @@ msgstr ""
 msgid "Upload to storage"
 msgstr "Pujar a l'emmagatzematge"
 
+msgid "Switch to Device tab after upload."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr "El nom del fitxer que vol pujar no acaba amb \"%s\". Voleu continuar?"
@@ -16041,6 +16047,12 @@ msgstr "Estàs segur de tancar sessió?"
 msgid "Refresh Printers"
 msgstr "Refrescar Impressores"
 
+msgid "View print host webui in Device tab"
+msgstr ""
+
+msgid "Replace the BambuLab's device tab with print host webui"
+msgstr ""
+
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
 "signed certificate."
@@ -16493,21 +16505,17 @@ msgstr "Connectat a SimplyPrint amb èxit!"
 msgid "Could not connect to SimplyPrint"
 msgstr "No s'ha pogut connectar a SimplyPrint"
 
+msgid "Internal error"
+msgstr ""
+
+msgid "Unknown error"
+msgstr "Error desconegut"
+
 msgid "SimplyPrint account not linked. Go to Connect options to set it up."
 msgstr ""
 "No s'ha enllaçat el compte de SimplyPrint. Aneu a Opcions de Connexió per "
 "configurar-lo."
 
-msgid ""
-"File size exceeds the 100MB upload limit. Please upload your file through "
-"the panel."
-msgstr ""
-"La mida del fitxer supera el límit de pujada de 100 MB. Si us plau, "
-"carregueu el vostre fitxer a través del panell."
-
-msgid "Unknown error"
-msgstr "Error desconegut"
-
 msgid "Connection to Flashforge works correctly."
 msgstr "La connexió amb Flashforge funciona correctament."
 
@@ -16917,93 +16925,19 @@ msgstr ""
 "augmentar adequadament la temperatura del llit pot reduir la probabilitat de "
 "deformació."
 
+#~ msgid ""
+#~ "File size exceeds the 100MB upload limit. Please upload your file through "
+#~ "the panel."
+#~ msgstr ""
+#~ "La mida del fitxer supera el límit de pujada de 100 MB. Si us plau, "
+#~ "carregueu el vostre fitxer a través del panell."
+
 #~ msgid "Please input a valid value (K in 0~0.3)"
 #~ msgstr "Introduïu un valor vàlid ( K en 0 ~ 0.3 )"
 
 #~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
 #~ msgstr "Introduïu un valor vàlid ( K a 0 ~ 0.3, N a 0.6 ~ 2.0 )"
 
-#~ msgid "Select connected printetrs (0/6)"
-#~ msgstr "Seleccionar impressores connectades (0/6)"
-
-#, c-format, boost-format
-#~ msgid "Select Connected Printetrs (%d/6)"
-#~ msgstr "Seleccionar Impressores Connectades (%d/6)"
-
-#~ msgid "PrintingPause"
-#~ msgstr "Pausar Impressió"
-
-#~ msgid "Printer local connection failed, please try again."
-#~ msgstr "La connexió local de la impressora ha fallat, torneu-ho a provar."
-
-#~ msgid ""
-#~ "Please find the details of Flow Dynamics Calibration from our wiki.\n"
-#~ "\n"
-#~ "Usually the calibration is unnecessary. When you start a single color/"
-#~ "material print, with the \"flow dynamics calibration\" option checked in "
-#~ "the print start menu, the printer will follow the old way, calibrate the "
-#~ "filament before the print; When you start a multi color/material print, "
-#~ "the printer will use the default compensation parameter for the filament "
-#~ "during every filament switch which will have a good result in most "
-#~ "cases.\n"
-#~ "\n"
-#~ "Please note there are a few cases that will make the calibration result "
-#~ "not reliable: using a texture plate to do the calibration; the build "
-#~ "plate does not have good adhesion (please wash the build plate or apply "
-#~ "gluestick!) ...You can find more from our wiki.\n"
-#~ "\n"
-#~ "The calibration results have about 10 percent jitter in our test, which "
-#~ "may cause the result not exactly the same in each calibration. We are "
-#~ "still investigating the root cause to do improvements with new updates."
-#~ msgstr ""
-#~ "Consulteu els detalls del Calibratge de les Dinàmiques de Flux al nostre "
-#~ "wiki.\n"
-#~ "\n"
-#~ "Normalment el calibratge és innecessari. Quan inicieu una impressió d'un "
-#~ "sol color/material, amb l'opció \"Calibratge de les Dinàmiques de Flux\" "
-#~ "marcada al menú d'inici d'impressió, la impressora seguirà la forma "
-#~ "antiga, calibrarà el filament abans de la impressió; Quan s'inicia una "
-#~ "impressió multicolor/multimaterial, la impressora utilitzarà el paràmetre "
-#~ "de compensació predeterminat per al filament durant cada canvi de "
-#~ "filament, el qual tindrà un bon resultat en la majoria dels casos.\n"
-#~ "\n"
-#~ "Tingueu en compte que hi ha alguns casos que faran que el resultat del "
-#~ "calibratge no sigui fiable: utilitzar una placa de textura per fer el "
-#~ "calibratge; si la placa d'impressió no té una bona adherència ( renteu la "
-#~ "placa d'impressió o apliqueu adhesiu! ) ... Podeu trobar més informació a "
-#~ "la nostra wiki.\n"
-#~ "\n"
-#~ "Els resultats del calibratge tenen al voltant d'un 10 per cent de "
-#~ "fluctuació en la nostra prova, la qual cosa pot fer que el resultat no "
-#~ "sigui exactament el mateix en cada calibratge. Encara estem investigant "
-#~ "la causa arrel per fer millores amb noves actualitzacions."
-
-#~ msgid ""
-#~ "Only one of the results with the same name will be saved. Are you sure "
-#~ "you want to overrides the other results?"
-#~ msgstr ""
-#~ "Només es desarà un dels resultats amb el mateix nom. Estàs segur que vols "
-#~ "sobreescriure els altres resultats?"
-
-#, c-format, boost-format
-#~ msgid ""
-#~ "There is already a historical calibration result with the same name: %s. "
-#~ "Only one of the results with the same name is saved. Are you sure you "
-#~ "want to overrides the historical result?"
-#~ msgstr ""
-#~ "Ja hi ha un resultat històric de calibratge amb el mateix nom: %s. Només "
-#~ "es pot guardar un dels resultats amb el mateix nom. Estàs segur que vols "
-#~ "sobreescriure el resultat històric?"
-
-#~ msgid "Please find the cornor with perfect degree of extrusion"
-#~ msgstr "Busqueu la cantonada amb un grau d'extrusió perfecte"
-
-#~ msgid "X"
-#~ msgstr "X"
-
-#~ msgid "Y"
-#~ msgstr "Y"
-
 #~ msgid "V"
 #~ msgstr "V"
 
@@ -17069,22 +17003,27 @@ msgstr ""
 #~ msgstr "HMS"
 
 #, fuzzy
+#~| msgid "Unsaved Changes"
 #~ msgid "Actions For Unsaved Changes"
 #~ msgstr "Canvis no desats"
 
 #, fuzzy
+#~| msgid "Reset scale"
 #~ msgid "Preset Value"
 #~ msgstr "Valor predefinit esquerre"
 
 #, fuzzy
+#~| msgid "Modified G-codes"
 #~ msgid "Modified Value"
 #~ msgstr "Valor modificat"
 
 #, fuzzy
+#~| msgid "User Preset"
 #~ msgid "Use Preset Value"
 #~ msgstr "Perfil d'usuari"
 
 #, fuzzy
+#~| msgid "Save file as:"
 #~ msgid "Save Modified Value"
 #~ msgstr "Desa el fitxer com a:"
 
@@ -17097,6 +17036,10 @@ msgstr ""
 #~ "Voleu desar aquests paràmetres canviats (valor modificat)?"
 
 #, fuzzy
+#~| msgid ""
+#~| "You have changed some preset settings. \n"
+#~| "Would you like to keep these changed settings (new value) after "
+#~| "switching preset?"
 #~ msgid ""
 #~ "\n"
 #~ "Would you like to keep these changed settings(modified value) after "

localization/i18n/cs/OrcaSlicer_cs.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-06-16 23:01+0800\n"
+"POT-Creation-Date: 2024-06-21 20:03+0800\n"
 "PO-Revision-Date: 2023-09-30 15:15+0200\n"
 "Last-Translator: René Mošner <Renemosner@seznam.cz>\n"
 "Language-Team: \n"
@@ -14426,6 +14426,9 @@ msgstr "ABS/ASA"
 msgid "PETG"
 msgstr "PETG"
 
+msgid "PCTG"
+msgstr ""
+
 msgid "TPU"
 msgstr "TPU"
 
@@ -14522,6 +14525,9 @@ msgstr "Pokud je to nutné, použijte pro oddělení složek lomítko (/)."
 msgid "Upload to storage"
 msgstr "Nahrát do úložiště"
 
+msgid "Switch to Device tab after upload."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr "Název nahrávaného souboru neskončí s \"%s\". Přejete si pokračovat?"
@@ -15128,6 +15134,12 @@ msgstr ""
 msgid "Refresh Printers"
 msgstr "Obnovit tiskárny"
 
+msgid "View print host webui in Device tab"
+msgstr ""
+
+msgid "Replace the BambuLab's device tab with print host webui"
+msgstr ""
+
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
 "signed certificate."
@@ -15478,17 +15490,15 @@ msgstr ""
 msgid "Could not connect to SimplyPrint"
 msgstr ""
 
-msgid "SimplyPrint account not linked. Go to Connect options to set it up."
-msgstr ""
-
-msgid ""
-"File size exceeds the 100MB upload limit. Please upload your file through "
-"the panel."
+msgid "Internal error"
 msgstr ""
 
 msgid "Unknown error"
 msgstr ""
 
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
 msgid "Connection to Flashforge works correctly."
 msgstr ""
 

localization/i18n/de/OrcaSlicer_de.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-06-16 23:01+0800\n"
+"POT-Creation-Date: 2024-06-21 20:03+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Heiko Liebscher <hliebschergmail.com>\n"
 "Language-Team: \n"
@@ -2902,6 +2902,7 @@ msgstr ""
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)"
 msgstr ""
+"Bitte geben Sie einen gültigen Wert ein (K in %.1f~%.1f, N in %.1f~%.1f)"
 
 msgid "Other Color"
 msgstr "Andere Farbe"
@@ -3408,7 +3409,7 @@ msgid "Printing Failed"
 msgstr "Druck fehlgeschlagen"
 
 msgid "Printing Pause"
-msgstr ""
+msgstr "Druck pausiert"
 
 msgid "Prepare"
 msgstr "Vorbereiten"
@@ -3508,7 +3509,7 @@ msgid "Send Options"
 msgstr "Senden-Optionen"
 
 msgid "Send to"
-msgstr ""
+msgstr "Senden an"
 
 msgid ""
 "printers at the same time.(It depends on how many devices can undergo "
@@ -8601,27 +8602,40 @@ msgid ""
 "Windows Media Player is required for this task! Do you want to enable "
 "'Windows Media Player' for your operation system?"
 msgstr ""
+"Windows Media Player wird für diese Aufgabe benötigt! Möchten Sie 'Windows "
+"Media Player' für Ihr Betriebssystem aktivieren?"
 
 msgid ""
 "BambuSource has not correctly been registered for media playing! Press Yes "
 "to re-register it. You will be promoted twice"
 msgstr ""
+"BambuSource wurde nicht korrekt für das Abspielen von Medien registriert! "
+"Drücken Sie Ja, um es erneut zu registrieren. Sie werden zweimal aufgefordert"
 
 msgid ""
 "Missing BambuSource component registered for media playing! Please re-"
 "install BambuStutio or seek after-sales help."
 msgstr ""
+"Fehlendes BambuSource-Komponente für das Abspielen von Medien registriert! "
+"Bitte installieren Sie BambuStudio erneut oder suchen Sie nach "
+"Kundendiensthilfe."
 
 msgid ""
 "Using a BambuSource from a different install, video play may not work "
 "correctly! Press Yes to fix it."
 msgstr ""
+"Verwendung eines BambuSource aus einer anderen Installation, das Abspielen "
+"von Videos funktioniert möglicherweise nicht korrekt! Drücken Sie Ja, um es "
+"zu beheben."
 
 msgid ""
 "Your system is missing H.264 codecs for GStreamer, which are required to "
 "play video.  (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-"
 "libav packages, then restart Orca Slicer?)"
 msgstr ""
+"Ihr System fehlt H.264-Codecs für GStreamer, die zum Abspielen von Videos "
+"erforderlich sind. (Versuchen Sie, die Pakete gstreamer1.0-plugins-bad oder "
+"gstreamer1.0-libav zu installieren und starten Sie Orca Slicer neu?)"
 
 msgid "Bambu Network plug-in not detected."
 msgstr "Bambu Network Plugin nicht erkannt."
@@ -10949,7 +10963,7 @@ msgstr ""
 "Ein- und Ausschaltens zu reduzieren"
 
 msgid "Don't slow down outer walls"
-msgstr ""
+msgstr "Äußere Wände nicht verlangsamen"
 
 msgid ""
 "If enabled, this setting will ensure external perimeters are not slowed down "
@@ -10963,6 +10977,17 @@ msgid ""
 "external walls\n"
 "\n"
 msgstr ""
+"Wenn diese Einstellung aktiviert ist, wird sichergestellt, dass die externen "
+"Umfänge nicht verlangsamt werden, um die Mindestschichtzeit zu erreichen. "
+"Dies ist besonders hilfreich in den folgenden Szenarien:\n"
+"\n"
+" 1. Um Änderungen im Glanz beim Drucken von glänzenden Filamenten zu "
+"vermeiden\n"
+"2. Um Änderungen in der Geschwindigkeit der äußeren Wand zu vermeiden, die "
+"leichte Wandartefakte erzeugen können, die wie Z-Banding aussehen\n"
+"3. Um das Drucken mit Geschwindigkeiten zu vermeiden, die VFAs (feine "
+"Artefakte) an den äußeren Wänden verursachen\n"
+"\n"
 
 msgid "Layer time"
 msgstr "Schichtdauer"
@@ -11552,7 +11577,7 @@ msgstr ""
 "zulässiger Geschwindigkeit."
 
 msgid "layer"
-msgstr ""
+msgstr "Schicht"
 
 msgid "Support interface fan speed"
 msgstr "Stützstruktur-Schnittstelle"
@@ -14912,6 +14937,26 @@ msgid ""
 "cause the result not exactly the same in each calibration. We are still "
 "investigating the root cause to do improvements with new updates."
 msgstr ""
+"Bitte finden Sie die Details zur Flussdynamik-Kalibrierung in unserem Wiki.\n"
+"\n"
+"Normalerweise ist die Kalibrierung nicht erforderlich. Wenn Sie einen Druck "
+"mit einer einzigen Farbe/einem einzigen Material starten und die Option "
+"\"Flussdynamik-Kalibrierung\" im Druckstartmenü aktiviert ist, folgt der "
+"Drucker dem alten Weg, kalibriert das Filament vor dem Druck; Wenn Sie einen "
+"Druck mit mehreren Farben/Materialien starten, verwendet der Drucker den "
+"Standardkompensationsparameter für das Filament bei jedem Filamentwechsel, "
+"was in den meisten Fällen zu einem guten Ergebnis führt.\n"
+"\n"
+"Bitte beachten Sie, dass es einige Fälle gibt, die die "
+"Kalibrierungsergebnisse unzuverlässig machen können, wie z.B. unzureichende "
+"Haftung auf dem Druckbett. Eine Verbesserung der Haftung kann durch Waschen "
+"des Druckbetts oder Auftragen von Klebstoff erreicht werden. Weitere "
+"Informationen zu diesem Thema finden Sie in unserem Wiki.\n"
+"\n"
+"Die Kalibrierungsergebnisse haben in unserem Test etwa 10 Prozent Jitter, "
+"was dazu führen kann, dass das Ergebnis bei jeder Kalibrierung nicht genau "
+"dasselbe ist. Wir untersuchen immer noch die Ursache, um mit neuen Updates "
+"Verbesserungen vorzunehmen."
 
 msgid "When to use Flow Rate Calibration"
 msgstr "Wann soll die Flussratenkalibrierung verwendet werden"
@@ -15313,6 +15358,9 @@ msgstr "ABS/ASA"
 msgid "PETG"
 msgstr "PETG"
 
+msgid "PCTG"
+msgstr ""
+
 msgid "TPU"
 msgstr "TPU"
 
@@ -15410,6 +15458,9 @@ msgstr ""
 msgid "Upload to storage"
 msgstr "Hochladen in den Speicher"
 
+msgid "Switch to Device tab after upload."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr ""
@@ -16115,6 +16166,12 @@ msgstr "Sind Sie sicher, dass Sie sich abmelden möchten?"
 msgid "Refresh Printers"
 msgstr "Drucker aktualisieren"
 
+msgid "View print host webui in Device tab"
+msgstr ""
+
+msgid "Replace the BambuLab's device tab with print host webui"
+msgstr ""
+
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
 "signed certificate."
@@ -16561,21 +16618,17 @@ msgstr "Erfolgreich mit SimplyPrint verbunden!"
 msgid "Could not connect to SimplyPrint"
 msgstr "Konnte keine Verbindung zu SimplyPrint herstellen"
 
+msgid "Internal error"
+msgstr ""
+
+msgid "Unknown error"
+msgstr "Unbekannter Fehler"
+
 msgid "SimplyPrint account not linked. Go to Connect options to set it up."
 msgstr ""
 "SimplyPrint-Konto nicht verknüpft. Gehen Sie zu den Verbindungsoptionen, um "
 "es einzurichten."
 
-msgid ""
-"File size exceeds the 100MB upload limit. Please upload your file through "
-"the panel."
-msgstr ""
-"Die Dateigröße überschreitet das 100-MB-Upload-Limit. Bitte laden Sie Ihre "
-"Datei über das Panel hoch."
-
-msgid "Unknown error"
-msgstr "Unbekannter Fehler"
-
 msgid "Connection to Flashforge works correctly."
 msgstr "Verbindung zu Flashforge funktioniert korrekt."
 
@@ -16991,6 +17044,13 @@ msgstr ""
 "wie z.B. ABS, durch eine entsprechende Erhöhung der Heizbetttemperatur die "
 "Wahrscheinlichkeit von Verwerfungen verringert werden kann."
 
+#~ msgid ""
+#~ "File size exceeds the 100MB upload limit. Please upload your file through "
+#~ "the panel."
+#~ msgstr ""
+#~ "Die Dateigröße überschreitet das 100-MB-Upload-Limit. Bitte laden Sie "
+#~ "Ihre Datei über das Panel hoch."
+
 #~ msgid "Please input a valid value (K in 0~0.3)"
 #~ msgstr "Bitte geben Sie einen gültigen Wert ein (K in 0~0.3)"
 

localization/i18n/en/OrcaSlicer_en.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-06-16 23:01+0800\n"
+"POT-Creation-Date: 2024-06-21 20:03+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -14131,6 +14131,9 @@ msgstr "ABS/ASA"
 msgid "PETG"
 msgstr "PETG"
 
+msgid "PCTG"
+msgstr ""
+
 msgid "TPU"
 msgstr "TPU"
 
@@ -14215,6 +14218,9 @@ msgstr "Use forward slashes ( / ) as a directory separator if needed."
 msgid "Upload to storage"
 msgstr ""
 
+msgid "Switch to Device tab after upload."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr "Upload filename doesn't end with \"%s\". Do you wish to continue?"
@@ -14875,6 +14881,12 @@ msgstr ""
 msgid "Refresh Printers"
 msgstr "Refresh Printers"
 
+msgid "View print host webui in Device tab"
+msgstr ""
+
+msgid "Replace the BambuLab's device tab with print host webui"
+msgstr ""
+
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
 "signed certificate."
@@ -15304,17 +15316,15 @@ msgstr ""
 msgid "Could not connect to SimplyPrint"
 msgstr ""
 
-msgid "SimplyPrint account not linked. Go to Connect options to set it up."
-msgstr ""
-
-msgid ""
-"File size exceeds the 100MB upload limit. Please upload your file through "
-"the panel."
+msgid "Internal error"
 msgstr ""
 
 msgid "Unknown error"
 msgstr ""
 
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
 msgid "Connection to Flashforge works correctly."
 msgstr ""
 

localization/i18n/fr/OrcaSlicer_fr.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-06-16 23:01+0800\n"
+"POT-Creation-Date: 2024-06-21 20:03+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: Guislain Cyril, Thomas Lété\n"
@@ -2898,11 +2898,12 @@ msgstr "Vous devez d'abord sélectionner le type de matériau et sa couleur."
 
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
-msgstr ""
+msgstr "Veuillez saisir une valeur valide (K entre %.1f~%.1f)"
 
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)"
 msgstr ""
+"Veuillez saisir une valeur valide (K entre %.1f~%.1f, N entre %.1f~%.1f)"
 
 msgid "Other Color"
 msgstr "Autre couleur"
@@ -3341,11 +3342,11 @@ msgid "Edit multiple printers"
 msgstr "Modifier plusieurs imprimantes"
 
 msgid "Select connected printers (0/6)"
-msgstr ""
+msgstr "Sélection des imprimantes connectées (0/6)"
 
 #, c-format, boost-format
 msgid "Select Connected Printers (%d/6)"
-msgstr ""
+msgstr "Sélection des imprimantes connectées (%d/6)"
 
 #, c-format, boost-format
 msgid "The maximum number of printers that can be selected is %d"
@@ -3409,7 +3410,7 @@ msgid "Printing Failed"
 msgstr "Échec de l’impression"
 
 msgid "Printing Pause"
-msgstr ""
+msgstr "Impression en pause"
 
 msgid "Prepare"
 msgstr "Préparer"
@@ -3509,7 +3510,7 @@ msgid "Send Options"
 msgstr "Options d’envoi"
 
 msgid "Send to"
-msgstr ""
+msgstr "Envoyer à"
 
 msgid ""
 "printers at the same time.(It depends on how many devices can undergo "
@@ -7813,8 +7814,8 @@ msgstr ""
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
-"by right-click the empty position of build plate and choose \"Add Primitive"
-"\"->\"Timelapse Wipe Tower\"."
+"by right-click the empty position of build plate and choose \"Add "
+"Primitive\"->\"Timelapse Wipe Tower\"."
 msgstr ""
 "Lorsque vous enregistrez un timelapse sans tête d’outil, il est recommandé "
 "d’ajouter une \"Tour d’essuyage timelapse\".\n"
@@ -7969,9 +7970,9 @@ msgid ""
 "Bed temperature when cool plate is installed. Value 0 means the filament "
 "does not support to print on the Cool Plate"
 msgstr ""
-"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool plate"
-"\") est installé. Une valeur à 0 signifie que ce filament ne peut pas être "
-"imprimé sur le plateau froid."
+"Il s'agit de la température du plateau lorsque le plateau froid (\"Cool "
+"plate\") est installé. Une valeur à 0 signifie que ce filament ne peut pas "
+"être imprimé sur le plateau froid."
 
 msgid "Engineering plate"
 msgstr "Plaque Engineering"
@@ -8630,27 +8631,40 @@ msgid ""
 "Windows Media Player is required for this task! Do you want to enable "
 "'Windows Media Player' for your operation system?"
 msgstr ""
+"Windows Media Player est nécessaire pour cette tâche ! Voulez-vous activer "
+"‘Windows Media Player’ pour votre système d’exploitation ?"
 
 msgid ""
 "BambuSource has not correctly been registered for media playing! Press Yes "
 "to re-register it. You will be promoted twice"
 msgstr ""
+"BambuSource n’a pas été correctement enregistré pour la lecture de médias ! "
+"Appuyez sur Oui pour le réenregistrer. Vous recevrez deux fois la demande de "
+"permission."
 
 msgid ""
 "Missing BambuSource component registered for media playing! Please re-"
 "install BambuStutio or seek after-sales help."
 msgstr ""
+"Composant BambuSource manquant enregistré pour la lecture des médias ! "
+"Veuillez réinstaller OrcaSlicer ou demander de l’aide au service après-vente."
 
 msgid ""
 "Using a BambuSource from a different install, video play may not work "
 "correctly! Press Yes to fix it."
 msgstr ""
+"Si vous utilisez une BambuSource provenant d’une autre installation, la "
+"lecture de la vidéo peut ne pas fonctionner correctement ! Appuyez sur Oui "
+"pour résoudre le problème."
 
 msgid ""
 "Your system is missing H.264 codecs for GStreamer, which are required to "
 "play video.  (Try installing the gstreamer1.0-plugins-bad or gstreamer1.0-"
 "libav packages, then restart Orca Slicer?)"
 msgstr ""
+"Il manque à votre système les codecs H.264 pour GStreamer, qui sont "
+"nécessaires pour lire la vidéo.  (Essayez d’installer les paquets "
+"gstreamer1.0-plugins-bad ou gstreamer1.0-libav, puis redémarrez Orca Slicer)."
 
 msgid "Bambu Network plug-in not detected."
 msgstr "Le plug-in Bambu Network n’a pas été détecté."
@@ -11013,7 +11027,7 @@ msgstr ""
 "réduire la fréquence de démarrage et d'arrêt"
 
 msgid "Don't slow down outer walls"
-msgstr ""
+msgstr "Ne pas ralentir sur les parois extérieures"
 
 msgid ""
 "If enabled, this setting will ensure external perimeters are not slowed down "
@@ -11027,6 +11041,16 @@ msgid ""
 "external walls\n"
 "\n"
 msgstr ""
+"S’il est activé, ce paramètre garantit que les périmètres externes ne sont "
+"pas ralentis pour respecter la durée minimale de la couche. Ceci est "
+"particulièrement utile dans les scénarios suivants :\n"
+"\n"
+" 1. Pour éviter les changements de brillance lors de l’impression de "
+"filaments brillants \n"
+"2. Pour éviter les changements de vitesse des parois externes qui peuvent "
+"créer de légers artefacts de paroi qui apparaissent comme des bandes en z. \n"
+"3. Pour éviter d’imprimer à des vitesses qui provoquent des VFA (artefacts "
+"fins) sur les parois externes.\n"
 
 msgid "Layer time"
 msgstr "Temps de couche"
@@ -11606,10 +11630,10 @@ msgstr "Ventilateur à pleine vitesse à la couche"
 
 msgid ""
 "Fan speed will be ramped up linearly from zero at layer "
-"\"close_fan_the_first_x_layers\" to maximum at layer \"full_fan_speed_layer"
-"\". \"full_fan_speed_layer\" will be ignored if lower than "
-"\"close_fan_the_first_x_layers\", in which case the fan will be running at "
-"maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
+"\"close_fan_the_first_x_layers\" to maximum at layer "
+"\"full_fan_speed_layer\". \"full_fan_speed_layer\" will be ignored if lower "
+"than \"close_fan_the_first_x_layers\", in which case the fan will be running "
+"at maximum allowed speed at layer \"close_fan_the_first_x_layers\" + 1."
 msgstr ""
 "La vitesse du ventilateur augmentera de manière linéaire à partir de zéro à "
 "la couche \"close_fan_the_first_x_layers\" jusqu’au maximum à la couche "
@@ -11619,7 +11643,7 @@ msgstr ""
 "\"close_fan_the_first_x_layers\" + 1."
 
 msgid "layer"
-msgstr ""
+msgstr "couche"
 
 msgid "Support interface fan speed"
 msgstr "Vitesse du ventilateur"
@@ -13346,8 +13370,8 @@ msgid ""
 "Use \"Even-odd\" for 3DLabPrint airplane models. Use \"Close holes\" to "
 "close all holes in the model."
 msgstr ""
-"Utilisez « Pair-impair » pour les modèles d'avion 3DLabPrint. Utilisez « "
-"Fermer les trous » pour fermer tous les trous du modèle."
+"Utilisez « Pair-impair » pour les modèles d'avion 3DLabPrint. Utilisez "
+"« Fermer les trous » pour fermer tous les trous du modèle."
 
 msgid "Regular"
 msgstr "Standard"
@@ -14156,8 +14180,8 @@ msgid ""
 "Wipe tower is only compatible with relative mode. It is recommended on most "
 "printers. Default is checked"
 msgstr ""
-"L’extrusion relative est recommandée lors de l’utilisation de l’option « "
-"label_objects ». Certains extrudeurs fonctionnent mieux avec cette option "
+"L’extrusion relative est recommandée lors de l’utilisation de l’option "
+"« label_objects ». Certains extrudeurs fonctionnent mieux avec cette option "
 "non verrouillée (mode d’extrusion absolu). La tour d’essuyage n’est "
 "compatible qu’avec le mode relatif. Il est recommandé sur la plupart des "
 "imprimantes. L’option par défaut est cochée"
@@ -15016,6 +15040,28 @@ msgid ""
 "cause the result not exactly the same in each calibration. We are still "
 "investigating the root cause to do improvements with new updates."
 msgstr ""
+"Vous trouverez les détails de l'étalonnage de la dynamique des flux dans "
+"notre wiki.\n"
+"\n"
+"En général, la calibration n’est pas nécessaire. Lorsque vous démarrez une "
+"impression mono-couleur/matériau, avec l’option « calibration de la "
+"dynamique de flux » cochée dans le menu de démarrage de l’impression, "
+"l’imprimante suivra l’ancienne méthode, en calibrant le filament avant "
+"l’impression ; Lorsque vous démarrez une impression multi-couleur/matériau, "
+"l’imprimante utilisera le paramètre de compensation par défaut pour le "
+"filament lors de chaque changement de filament, ce qui donnera un bon "
+"résultat dans la plupart des cas.\n"
+"\n"
+"Veuillez noter qu’il existe quelques cas qui peuvent rendre les résultats de "
+"la calibration peu fiables, tels qu’une adhérence insuffisante sur le "
+"plateau. Il est possible d’améliorer l’adhérence en lavant la plaque de "
+"construction ou en appliquant de la colle. Pour plus d’informations à ce "
+"sujet, veuillez consulter notre Wiki.\n"
+"\n"
+"Les résultats de la calibration présentent une fluctuation d’environ 10 % "
+"dans notre test, ce qui peut entraîner une différence entre les résultats de "
+"chaque calibration. Nous continuons d’étudier la cause première afin "
+"d’apporter des améliorations lors des nouvelles mises à jour."
 
 msgid "When to use Flow Rate Calibration"
 msgstr "Nécessité de la calibration du débit"
@@ -15423,6 +15469,9 @@ msgstr "ABS/ASA"
 msgid "PETG"
 msgstr "PETG"
 
+msgid "PCTG"
+msgstr "PCTG"
+
 msgid "TPU"
 msgstr "TPU"
 
@@ -15521,6 +15570,9 @@ msgstr ""
 msgid "Upload to storage"
 msgstr "Envoyer vers le stockage"
 
+msgid "Switch to Device tab after upload."
+msgstr "Passer à l’onglet Appareil après le téléchargement."
+
 #, c-format, boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr ""
@@ -15760,8 +15812,8 @@ msgstr ""
 "Voulez-vous le réécrire ?"
 
 msgid ""
-"We would rename the presets as \"Vendor Type Serial @printer you selected"
-"\". \n"
+"We would rename the presets as \"Vendor Type Serial @printer you "
+"selected\". \n"
 "To add preset for more printers, Please go to printer selection"
 msgstr ""
 "Nous renommerions les préréglages en « Vendor Type Serial @printer you "
@@ -16233,6 +16285,13 @@ msgstr "Êtes-vous sûr de pouvoir vous déconnecter ?"
 msgid "Refresh Printers"
 msgstr "Actualiser les imprimantes"
 
+msgid "View print host webui in Device tab"
+msgstr ""
+"Afficher l’interface web de l’hôte d’impression dans l’onglet Périphérique"
+
+msgid "Replace the BambuLab's device tab with print host webui"
+msgstr "Remplacer l’onglet device de BambuLab par print host webui"
+
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
 "signed certificate."
@@ -16697,21 +16756,17 @@ msgstr "Connexion à SimplyPrint réussie !"
 msgid "Could not connect to SimplyPrint"
 msgstr "Impossible de se connecter à SimplyPrint"
 
+msgid "Internel error"
+msgstr "Erreur interne"
+
+msgid "Unknown error"
+msgstr "Erreur inconnue"
+
 msgid "SimplyPrint account not linked. Go to Connect options to set it up."
 msgstr ""
 "Le compte SimplyPrint n’est pas lié. Allez dans les options de connexion "
 "pour le configurer."
 
-msgid ""
-"File size exceeds the 100MB upload limit. Please upload your file through "
-"the panel."
-msgstr ""
-"La taille du fichier dépasse la limite de téléchargement de 100 Mo. Veuillez "
-"télécharger votre fichier via le panneau."
-
-msgid "Unknown error"
-msgstr "Erreur inconnue"
-
 msgid "Connection to Flashforge works correctly."
 msgstr "La connexion à Flashforge fonctionne correctement."
 
@@ -17130,6 +17185,13 @@ msgstr ""
 "déformer, tels que l’ABS, une augmentation appropriée de la température du "
 "plateau chauffant peut réduire la probabilité de déformation."
 
+#~ msgid ""
+#~ "File size exceeds the 100MB upload limit. Please upload your file through "
+#~ "the panel."
+#~ msgstr ""
+#~ "La taille du fichier dépasse la limite de téléchargement de 100 Mo. "
+#~ "Veuillez télécharger votre fichier via le panneau."
+
 #~ msgid "Please input a valid value (K in 0~0.3)"
 #~ msgstr "Veuillez saisir une valeur valide (K entre 0 et 0,3)"
 
@@ -17671,8 +17733,8 @@ msgstr ""
 #~ "thickness (top+bottom solid layers)"
 #~ msgstr ""
 #~ "Ajoutez du remplissage solide à proximité des surfaces inclinées pour "
-#~ "garantir l'épaisseur verticale de la coque (couches solides supérieure"
-#~ "+inférieure)."
+#~ "garantir l'épaisseur verticale de la coque (couches solides "
+#~ "supérieure+inférieure)."
 
 #~ msgid "Further reduce solid infill on walls (beta)"
 #~ msgstr "Réduire davantage le remplissage solide des parois (expérimental)"

localization/i18n/hu/OrcaSlicer_hu.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-06-16 23:01+0800\n"
+"POT-Creation-Date: 2024-06-21 20:03+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -14326,6 +14326,9 @@ msgstr "ABS/ASA"
 msgid "PETG"
 msgstr "PETG"
 
+msgid "PCTG"
+msgstr ""
+
 msgid "TPU"
 msgstr "TPU"
 
@@ -14410,6 +14413,9 @@ msgstr "Ha szükséges, használj perjeleket ( / ) könyvtárelválasztóként."
 msgid "Upload to storage"
 msgstr ""
 
+msgid "Switch to Device tab after upload."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr "A feltöltendő fájlnév nem végződik „%s”-ra. Folytatod?"
@@ -15071,6 +15077,12 @@ msgstr ""
 msgid "Refresh Printers"
 msgstr "Nyomtatók frissítése"
 
+msgid "View print host webui in Device tab"
+msgstr ""
+
+msgid "Replace the BambuLab's device tab with print host webui"
+msgstr ""
+
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
 "signed certificate."
@@ -15502,17 +15514,15 @@ msgstr ""
 msgid "Could not connect to SimplyPrint"
 msgstr ""
 
-msgid "SimplyPrint account not linked. Go to Connect options to set it up."
-msgstr ""
-
-msgid ""
-"File size exceeds the 100MB upload limit. Please upload your file through "
-"the panel."
+msgid "Internal error"
 msgstr ""
 
 msgid "Unknown error"
 msgstr ""
 
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
 msgid "Connection to Flashforge works correctly."
 msgstr ""
 

localization/i18n/it/OrcaSlicer_it.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-06-16 23:01+0800\n"
+"POT-Creation-Date: 2024-06-21 20:03+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -15176,6 +15176,9 @@ msgstr "ABS/ASA"
 msgid "PETG"
 msgstr "PETG"
 
+msgid "PCTG"
+msgstr ""
+
 msgid "TPU"
 msgstr "TPU (TPU)"
 
@@ -15272,6 +15275,9 @@ msgstr "Usa la barra ( / ) come separatore di cartella se necessario."
 msgid "Upload to storage"
 msgstr "Carica nello spazio di archiviazione"
 
+msgid "Switch to Device tab after upload."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr "Il nome del file caricato non finisce con \"%s\". Vuoi continuare?"
@@ -15966,6 +15972,12 @@ msgstr "Sei sicuro di voler effettuare il logout?"
 msgid "Refresh Printers"
 msgstr "Aggiorna Stampanti"
 
+msgid "View print host webui in Device tab"
+msgstr ""
+
+msgid "Replace the BambuLab's device tab with print host webui"
+msgstr ""
+
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
 "signed certificate."
@@ -16399,17 +16411,15 @@ msgstr ""
 msgid "Could not connect to SimplyPrint"
 msgstr ""
 
-msgid "SimplyPrint account not linked. Go to Connect options to set it up."
-msgstr ""
-
-msgid ""
-"File size exceeds the 100MB upload limit. Please upload your file through "
-"the panel."
+msgid "Internal error"
 msgstr ""
 
 msgid "Unknown error"
 msgstr ""
 
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
 msgid "Connection to Flashforge works correctly."
 msgstr ""
 

localization/i18n/ja/OrcaSlicer_ja.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-06-16 23:01+0800\n"
+"POT-Creation-Date: 2024-06-21 20:03+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -14024,6 +14024,9 @@ msgstr "ABS/ASA"
 msgid "PETG"
 msgstr "PETG"
 
+msgid "PCTG"
+msgstr ""
+
 msgid "TPU"
 msgstr "TPU"
 
@@ -14108,6 +14111,9 @@ msgstr "Use forward slashes ( / ) as a directory separator if needed."
 msgid "Upload to storage"
 msgstr "ストレージへのアップロード"
 
+msgid "Switch to Device tab after upload."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr "Filename to upload doesn't end with \"%s\". Do you want to continue?"
@@ -14766,6 +14772,12 @@ msgstr ""
 msgid "Refresh Printers"
 msgstr "Refresh Printers"
 
+msgid "View print host webui in Device tab"
+msgstr ""
+
+msgid "Replace the BambuLab's device tab with print host webui"
+msgstr ""
+
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
 "signed certificate."
@@ -15196,17 +15208,15 @@ msgstr ""
 msgid "Could not connect to SimplyPrint"
 msgstr ""
 
-msgid "SimplyPrint account not linked. Go to Connect options to set it up."
-msgstr ""
-
-msgid ""
-"File size exceeds the 100MB upload limit. Please upload your file through "
-"the panel."
+msgid "Internal error"
 msgstr ""
 
 msgid "Unknown error"
 msgstr ""
 
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
 msgid "Connection to Flashforge works correctly."
 msgstr ""
 

localization/i18n/ko/OrcaSlicer_ko.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-06-16 23:01+0800\n"
+"POT-Creation-Date: 2024-06-21 20:03+0800\n"
 "PO-Revision-Date: 2024-05-31 23:33+0900\n"
 "Last-Translator: Hotsolidinfill <138652683+Hotsolidinfill@users.noreply."
 "github.com>, crwusiz <crwusiz@gmail.com>\n"
@@ -1504,8 +1504,7 @@ msgstr "사용자가 로그아웃됨"
 
 msgid "new or open project file is not allowed during the slicing process!"
 msgstr ""
-"슬라이싱 프로세스 중에는 새 프로젝트 파일이나 열린 프로젝트 파일이 허용되지 "
-"않습니다!"
+"슬라이싱 중에는 새 프로젝트를 만들거나 프로젝트 파일을 열 수 없습니다!"
 
 msgid "Open Project"
 msgstr "프로젝트 열기"
@@ -2816,11 +2815,11 @@ msgstr "재료 유형과 색상을 먼저 선택해야 합니다."
 
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
-msgstr ""
+msgstr "유효한 값을 입력하세요 (%.1f~%.1f 사이의 K)"
 
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)"
-msgstr ""
+msgstr "유효한 값을 입력하세요 (%.1f~%.1f 사이의 K, %.1f~%.1f 사이의 N)"
 
 msgid "Other Color"
 msgstr "기타 색상"
@@ -3229,11 +3228,11 @@ msgid "Edit multiple printers"
 msgstr "여러 프린터 편집"
 
 msgid "Select connected printers (0/6)"
-msgstr ""
+msgstr "연결된 프린터 선택 (0/6)"
 
 #, c-format, boost-format
 msgid "Select Connected Printers (%d/6)"
-msgstr ""
+msgstr "연결된 프린터 선택 (%d/6)"
 
 #, c-format, boost-format
 msgid "The maximum number of printers that can be selected is %d"
@@ -3255,16 +3254,16 @@ msgid "Edit Printers"
 msgstr "프린터 편집"
 
 msgid "Device Name"
-msgstr "Device Name"
+msgstr "장치 이름"
 
 msgid "Task Name"
-msgstr "Task Name"
+msgstr "작업 이름"
 
 msgid "Device Status"
-msgstr "Device Status"
+msgstr "장치 상태"
 
 msgid "Actions"
-msgstr "Actions"
+msgstr "동작"
 
 msgid ""
 "Please select the devices you would like to manage here (up to 6 devices)"
@@ -3295,7 +3294,7 @@ msgid "Printing Failed"
 msgstr "인쇄 실패"
 
 msgid "Printing Pause"
-msgstr ""
+msgstr "인쇄 일시중지"
 
 msgid "Prepare"
 msgstr "준비 하기"
@@ -3334,22 +3333,22 @@ msgid "Stop"
 msgstr "정지"
 
 msgid "Task Status"
-msgstr "Task Status"
+msgstr "작업 상태"
 
 msgid "Sent Time"
-msgstr "Sent Time"
+msgstr "전송한 시간"
 
 msgid "There are no tasks to be sent!"
-msgstr "There are no tasks to be sent!"
+msgstr "전송할 작업이 없습니다!"
 
 msgid "No historical tasks!"
-msgstr "No historical tasks!"
+msgstr "작업 내역이 없습니다!"
 
 msgid "Loading..."
 msgstr "로딩 중..."
 
 msgid "No AMS"
-msgstr "No AMS"
+msgstr "AMS 없음"
 
 msgid "Send to Multi-device"
 msgstr "여러 장치로 보내기"
@@ -3367,19 +3366,19 @@ msgid "The number of printers in use simultaneously cannot be equal to 0."
 msgstr "동시에 사용 중인 프린터의 수는 0과 같을 수 없습니다."
 
 msgid "Use External Spool"
-msgstr "Use External Spool"
+msgstr "외부 스풀 사용"
 
 msgid "Use AMS"
-msgstr "Use AMS"
+msgstr "AMS 사용"
 
 msgid "Select Printers"
-msgstr "Select Printers"
+msgstr "프린터 선택"
 
 msgid "Ams Status"
-msgstr "AMS Status"
+msgstr "AMS 상태"
 
 msgid "Printing Options"
-msgstr "Printing Options"
+msgstr "인쇄 옵션"
 
 msgid "Bed Leveling"
 msgstr "베드 레벨링"
@@ -3391,7 +3390,7 @@ msgid "Flow Dynamic Calibration"
 msgstr "흐름 동적 보정"
 
 msgid "Send Options"
-msgstr "Send Options"
+msgstr "전송 옵션"
 
 msgid "Send to"
 msgstr ""
@@ -3970,10 +3969,10 @@ msgstr ""
 msgid ""
 "Invalid input format. Expected vector of dimensions in the following format: "
 "\"%1%\""
-msgstr ""
+msgstr "잘못된 입력 형식. 다음과 같은 벡터 형식의 치수를 입력하십시오: \"%1%\""
 
 msgid "Input value is out of range"
-msgstr ""
+msgstr "입력된 값이 범위를 벗어납니다"
 
 msgid "Some extension in the input is invalid"
 msgstr ""
@@ -5904,18 +5903,17 @@ msgid "Loading file: %s"
 msgstr "파일 로드 중: %s"
 
 msgid "The 3mf is not supported by OrcaSlicer, load geometry data only."
-msgstr "이 3mf는 OrcaSlicer에서 지원되지 않습니다. 형상 데이터만 로드합니다."
+msgstr "이 3mf는 OrcaSlicer에서 지원되지 않습니다. 형상 데이터만 불러옵니다."
 
 msgid "Load 3mf"
-msgstr "3mf 로드"
+msgstr "3mf 불러오기"
 
 #, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, Found following keys "
 "unrecognized:"
 msgstr ""
-"3mf의 버전 %s이(가) %s의 버전 %s보다 최신입니다. 인식할 수 없는 다음 키를 찾"
-"았습니다:"
+"3mf의 버전 %s이(가) %s의 버전 %s보다 높습니다. 다음 키를 인식할 수 없습니다:"
 
 msgid "You'd better upgrade your software.\n"
 msgstr "소프트웨어를 업그레이드하는 것이 좋습니다.\n"
@@ -6019,7 +6017,7 @@ msgid "Object too large"
 msgstr "개체가 너무 큼"
 
 msgid "Export STL file:"
-msgstr "STL파일 내보내기:"
+msgstr "STL 파일 내보내기:"
 
 msgid "Export AMF file:"
 msgstr "AMF 파일 내보내기:"
@@ -6162,9 +6160,7 @@ msgstr "다운로드에 실패했습니다. 파일 크기 예외입니다."
 
 #, c-format, boost-format
 msgid "Project downloaded %d%%"
-msgstr ""
-"프로젝트 다운로드 %d%%Bambu Studio로 가져오는 데 실패했습니다. 파일을 다운로"
-"드하여 수동으로 가져오세요."
+msgstr "프로젝트 %d%% 다운로드됨"
 
 msgid ""
 "Importing to Orca Slicer failed. Please download the file and manually "
@@ -6233,7 +6229,7 @@ msgstr ""
 "습니까?"
 
 msgid "Number of copies:"
-msgstr "복제 수:"
+msgstr "복제본 수:"
 
 msgid "Copies of the selected object"
 msgstr "선택한 개체의 복제본"
@@ -6438,7 +6434,7 @@ msgid ""
 "This stops the transmission of data to Bambu's cloud services. Users who "
 "don't use BBL machines or use LAN mode only can safely turn on this function."
 msgstr ""
-"이 기능은 밤부의 클라우드 서비스로의 데이터 전송을 중지합니다. BBL 머신을 사"
+"이 기능은 뱀부의 클라우드 서비스로의 데이터 전송을 중지합니다. BBL 머신을 사"
 "용하지 않거나 LAN 모드만 사용하는 사용자는 이 기능을 안전하게 켤 수 있습니다."
 
 msgid "Enable network plugin"
@@ -6532,7 +6528,7 @@ msgid "Show \"Tip of the day\" notification after start"
 msgstr "시작 후 \"오늘의 팁\" 알림 표시"
 
 msgid "If enabled, useful hints are displayed at startup."
-msgstr "활성화된 경우 시작 시 유용한 힌트가 표시됩니다."
+msgstr "활성화하면 시작 시 유용한 힌트가 표시됩니다."
 
 msgid "Flushing volumes: Auto-calculate everytime the color changed."
 msgstr "플러시 볼륨: 색상이 변경될 때마다 자동 계산됩니다."
@@ -6554,17 +6550,17 @@ msgid ""
 "If enabled, Orca will remember and switch filament/process configuration for "
 "each printer automatically."
 msgstr ""
-"활성화된 경우 Orca는 각 프린터의 필라멘트/프로세스 구성을 자동으로 기억하고 "
+"활성화하면 Orca는 각 프린터의 필라멘트/프로세스 구성을 자동으로 기억하고 "
 "전환합니다."
 
 msgid "Multi-device Management(Take effect after restarting Orca)."
-msgstr "다중 장치 관리(Studio를 다시 시작한 후 적용)."
+msgstr "다중 장치 관리 (Orca를 다시 시작한 후 적용됨)."
 
 msgid ""
 "With this option enabled, you can send a task to multiple devices at the "
 "same time and manage multiple devices."
 msgstr ""
-"이 옵션을 활성화하면 동시에 여러 장치에 작업을 보내고 여러 장치를 관리할 수 "
+"활성화하면 여러 장치에 동시에 작업을 보내고 여러 장치를 관리할 수 "
 "있습니다."
 
 msgid "Network"
@@ -6620,7 +6616,7 @@ msgid "Current association: "
 msgstr "현재 연결:"
 
 msgid "Associate prusaslicer://"
-msgstr "프루사슬라이서://"
+msgstr "prusaslicer:// 연결"
 
 msgid "Not associated to any application"
 msgstr "어떤 애플리케이션과도 연결되지 않음"
@@ -6629,27 +6625,27 @@ msgid ""
 "Associate OrcaSlicer with prusaslicer:// links so that Orca can open models "
 "from Printable.com"
 msgstr ""
-"Orca가 Printable.com에서 모델을 열 수 있도록 OrcaSlicer를 prusaslicer:// 링크"
+"OrcaSlicer가 Printable.com에서 모델을 열 수 있도록 OrcaSlicer를 prusaslicer:// 링크"
 "와 연결합니다."
 
 msgid "Associate bambustudio://"
-msgstr "연결 bambustudio://"
+msgstr "bambustudio:// 연결"
 
 msgid ""
 "Associate OrcaSlicer with bambustudio:// links so that Orca can open models "
 "from makerworld.com"
 msgstr ""
-"Orca가 makerworld.com에서 모델을 열 수 있도록 OrcaSlicer를 bambustudio:// 링"
-"크와 연결하세요."
+"OrcaSlicer가 makerworld.com에서 모델을 열 수 있도록 OrcaSlicer를 bambustudio:// 링"
+"크와 연결합니다."
 
 msgid "Associate cura://"
-msgstr "연결 cura://"
+msgstr "cura:// 연결"
 
 msgid ""
 "Associate OrcaSlicer with cura:// links so that Orca can open models from "
 "thingiverse.com"
 msgstr ""
-"Orca가 thingiverse.com에서 모델을 열 수 있도록 OrcaSlicer를 cura:// 링크와 연"
+"OOrcaSlicer가 thingiverse.com에서 모델을 열 수 있도록 OrcaSlicer를 cura:// 링크와 연"
 "결합니다."
 
 msgid "Maximum recent projects"
@@ -6888,7 +6884,7 @@ msgid "Jump to model publish web page"
 msgstr "모델 게시 웹 페이지로 이동"
 
 msgid "Note: The preparation may takes several minutes. Please be patiant."
-msgstr "참고: 준비하는 데 몇 분 정도 걸릴 수 있습니다. 조금만 기다려주십시오."
+msgstr "참고: 준비하는 데 몇 분 정도 걸릴 수 있습니다. 조금만 기다려 주십시오."
 
 msgid "Publish"
 msgstr "게시"
@@ -7275,7 +7271,7 @@ msgid "Please confirm on the printer screen"
 msgstr "프린터 화면에서 확인해주세요"
 
 msgid "Log in failed. Please check the Pin Code."
-msgstr "로그인 실패. 핀코드를 확인해주세요."
+msgstr "로그인 실패. 핀 코드를 확인해주세요."
 
 msgid "Log in printer"
 msgstr "프린터 로그인"
@@ -7743,10 +7739,10 @@ msgstr "출력 가능 공간"
 #. TRN: First argument is parameter name, the second one is the value.
 #, boost-format
 msgid "Invalid value provided for parameter %1%: %2%"
-msgstr ""
+msgstr "%1% 매개변수에 잘못된 값이 입력됨: %2%"
 
 msgid "G-code flavor is switched"
-msgstr ""
+msgstr "G코드 유형이 변경됨"
 
 msgid "Cooling Fan"
 msgstr "냉각 팬"
@@ -8016,7 +8012,7 @@ msgid "Capabilities"
 msgstr "성능"
 
 msgid "Show all presets (including incompatible)"
-msgstr "모든 사전 설정 표시(미 호환 포함)"
+msgstr "모든 사전 설정 표시(호환되지 않는 설정 포함)"
 
 msgid "Select presets to compare"
 msgstr "비교할 사전 설정 선택"
@@ -8261,7 +8257,8 @@ msgstr "으로"
 msgid ""
 "Windows Media Player is required for this task! Do you want to enable "
 "'Windows Media Player' for your operation system?"
-msgstr ""
+msgstr "이 작업에는 Windows Media Player가 필요합니다! 운영 체제에서 Windows Media Player를 "
+"활성화하시겠습니까?"
 
 msgid ""
 "BambuSource has not correctly been registered for media playing! Press Yes "
@@ -8658,7 +8655,7 @@ msgid "Test"
 msgstr "테스트"
 
 msgid "IP and Access Code Verified! You may close the window"
-msgstr "IP 및 접속코드가 확인되었습니다. 창을 닫아도 됩니다"
+msgstr "IP 및 액세스 코드가 확인되었습니다. 창을 닫아도 됩니다"
 
 msgid "Connection failed, please double check IP and Access Code"
 msgstr "연결에 실패했습니다. IP와 액세스 코드를 다시 확인하세요"
@@ -9073,8 +9070,8 @@ msgid ""
 "The prime tower is currently only supported for the Marlin, RepRap/Sprinter, "
 "RepRapFirmware and Repetier G-code flavors."
 msgstr ""
-"프라임 타워는 현재 Marlin, RepRap/Sprinter에만 지원됩니다.RepRapFirmware 및 "
-"Repetier G코드 유형."
+"프라임 타워는 현재 Marlin, RepRap/Sprinter, RepRapFirmware 및 Repetier G코드 "
+"유형에서만 지원됩니다."
 
 msgid "The prime tower is not supported in \"By object\" print."
 msgstr "프라임 타워는 \"개체별\" 출력에서 지원되지 않습니다."
@@ -9256,7 +9253,7 @@ msgid ""
 "Shrink the initial layer on build plate to compensate for elephant foot "
 "effect"
 msgstr ""
-"코끼리 발 효과를 보정하기 위해 빌드 플레이트의 초기 레이어를 축소합니다"
+"코끼리 발 효과를 보정하기 위해 빌드 플레이트에 닿는 첫 레이어를 축소합니다"
 
 msgid "Elephant foot compensation layers"
 msgstr "코끼리 발 보정 레이어"
@@ -9267,7 +9264,7 @@ msgid ""
 "the next layers will be linearly shrunk less, up to the layer indicated by "
 "this value."
 msgstr ""
-"코끼리 발 보정이 활성화될 레이어 수입니다. 첫 번째 레이어는 코끼리 발 보정 값"
+"코끼리 발 보정울 적용할 레이어의 수입니다. 첫 번째 레이어는 코끼리 발 보정 값"
 "만큼 축소되고, 다음 레이어부터 이 값으로 표시된 레이어까지 선형적으로 덜 축소"
 "됩니다."
 
@@ -9593,7 +9590,7 @@ msgid ""
 "calculated automatically. Otherwise the provided angle will be used for "
 "external bridges. Use 180°for zero angle."
 msgstr ""
-"브릿지출력 각도 재정의. 0°으로 두면 브릿지 출력 각도가 자동으로 계산됩니다. "
+"브릿지 출력 각도 재정의. 0°으로 두면 브릿지 출력 각도가 자동으로 계산됩니다. "
 "그렇지 않으면 제공된 각도가 외부 브릿지 출력에 사용됩니다. 0도에는 180°를 사"
 "용합니다."
 
@@ -9813,7 +9810,7 @@ msgstr ""
 "하세요"
 
 msgid "mm/s or %"
-msgstr "mm/s or %"
+msgstr "mm/s 또는 %"
 
 msgid "External"
 msgstr "외부"
@@ -10104,14 +10101,13 @@ msgid "End G-code when finish the whole printing"
 msgstr "전체 출력이 끝날때의 종료 G코드"
 
 msgid "Between Object Gcode"
-msgstr "개체와 G코드 사이"
+msgstr "개체 사이의 G코드"
 
 msgid ""
 "Insert Gcode between objects. This parameter will only come into effect when "
 "you print your models object by object"
 msgstr ""
-"개체 사이에 G코드를 삽입하세요. 이 매개변수는 다음 경우에만 적용됩니다.모델 "
-"개체를 개체별로 출력합니다"
+"개체 사이에 G코드를 삽입하세요. 이 매개변수는 개체별 출력을 사용할 때만 적용됩니다."
 
 msgid "End G-code when finish the printing of this filament"
 msgstr "이 필라멘트의 출력이 끝날때의 종료 G코드"
@@ -10369,7 +10365,7 @@ msgstr ""
 "이 옵션은 허용되는 배드 메쉬 영역의 최소 지점을 설정합니다. 프로브의 XY 옵셋"
 "으로 인해 대부분의 프린터는 전체 베드를 프로브할 수 없습니다. 프로브 포인트"
 "가 베드 영역 밖으로 나가지 않도록 하려면 베드 메쉬의 최소 및 최대 지점을 적절"
-"하게 설정해야 합니다. OrcaSlicer는adaptive_bed_mesh_min/"
+"하게 설정해야 합니다. OrcaSlicer는 adaptive_bed_mesh_min/"
 "adaptive_bed_mesh_max 값이 이러한 최소/최대 포인트를 초과하지 않도록 보장합니"
 "다. 이 정보는 일반적으로 프린터 제조업체로부터 얻을 수 있습니다. 기본 설정은 "
 "(-99999, -99999)입니다. 이는 제한이 없으므로 전체 베드에 걸쳐 프로빙이 가능함"
@@ -10391,7 +10387,7 @@ msgstr ""
 "이 옵션은 허용되는 침대 메쉬 영역의 최대 지점을 설정합니다. 프로브의 XY 옵셋"
 "으로 인해 대부분의 프린터는 전체 베드를 프로브할 수 없습니다. 프로브 포인트"
 "가 베드 영역 밖으로 나가지 않도록 하려면 베드 메쉬의 최소 및 최대 지점을 적절"
-"하게 설정해야 합니다. OrcaSlicer는adaptive_bed_mesh_min/"
+"하게 설정해야 합니다. OrcaSlicer는 adaptive_bed_mesh_min/"
 "adaptive_bed_mesh_max 값이 이러한 최소/최대 포인트를 초과하지 않도록 보장합니"
 "다. 이 정보는 일반적으로 프린터 제조업체로부터 얻을 수 있습니다. 기본 설정은 "
 "(99999, 99999)입니다. 이는 제한이 없으므로 전체 베드에 걸쳐 프로빙이 가능함"
@@ -10471,7 +10467,7 @@ msgstr ""
 "여 시동 및 정지 빈도를 줄입니다"
 
 msgid "Don't slow down outer walls"
-msgstr ""
+msgstr "외벽 감속하지 않기"
 
 msgid ""
 "If enabled, this setting will ensure external perimeters are not slowed down "
@@ -10485,6 +10481,14 @@ msgid ""
 "external walls\n"
 "\n"
 msgstr ""
+"활성화되면 최소 레이어 시간을 충족하기 위한 외벽의 출력 속도 감속을 적용하지 "
+"않습니다. 이 기능은 아래의 경우에 도움이 될 수 있습니다:\n"
+"\n"
+"1. 유광 필라멘트로 인쇄할 때 일정한 광택을 유지하기 위한 경우 \n"
+"2. 외벽 출력 속도의 변화로 인한 외벽의 Z밴딩처럼 보이는 형상이 생성되는 것을 "
+"방지하기 위한 경우 \n"
+"3. 외벽을 VFA를 발생시키는 속도로 출력하는 것을 방지하기 위한 경우\n"
+"\n"
 
 msgid "Layer time"
 msgstr "레이어 시간"
@@ -10535,19 +10539,19 @@ msgid "Filament load time"
 msgstr "필라멘트 넣기 시간"
 
 msgid "Time to load new filament when switch filament. For statistics only"
-msgstr "필라멘트 교체 시 새 필라멘트를 넣는 시간입니다. 통계 전용"
+msgstr "필라멘트 교체 시 새 필라멘트를 넣는 시간입니다. 통계에만 사용됩니다"
 
 msgid "Filament unload time"
 msgstr "필라멘트 빼기 시간"
 
 msgid "Time to unload old filament when switch filament. For statistics only"
-msgstr "필라멘트를 교체할 때 기존 필라멘트를 빼는 시간입니다. 통계 전용"
+msgstr "필라멘트를 교체할 때 기존 필라멘트를 빼는 시간입니다. 통계에만 사용됩니다"
 
 msgid ""
 "Filament diameter is used to calculate extrusion in gcode, so it's important "
 "and should be accurate"
 msgstr ""
-"필라멘트 직경은 G코드에서 압출을 계산하는데 사용되므로 중요하며 정확해야 합니"
+"필라멘트 직경은 G코드에서 압출량을 계산하는데 사용되므로 중요하며 정확해야 합니"
 "다"
 
 msgid "Shrinkage"
@@ -10562,7 +10566,7 @@ msgid ""
 "after the checks."
 msgstr ""
 "냉각 후 필라멘트가 얻게 될 수축률을 입력합니다(100mm 대신 94mm를 측정하는 경"
-"우 94% i). 출력물은 xy로 보정됩니다. 외벽에 사용되는 필라멘트만 고려됩니다.\n"
+"우 94%). 출력물은 xy 방향으로 보정됩니다. 외벽에 사용되는 필라멘트에만 적용됩니다.\n"
 "이 보정은 확인 후 수행되므로 개체 사이에 충분한 공간을 허용해야 합니다."
 
 msgid "Loading speed"
@@ -10909,7 +10913,7 @@ msgstr ""
 "니다."
 
 msgid "mm/s² or %"
-msgstr "mm/s² or %"
+msgstr "mm/s² 또는 %"
 
 msgid ""
 "Acceleration of sparse infill. If the value is expressed as a percentage (e."
@@ -11027,7 +11031,7 @@ msgstr ""
 "\"close_fan_the_first_x_layers\" + 1 에서 최대 허용 속도로 가도됩니다."
 
 msgid "layer"
-msgstr ""
+msgstr "레이어"
 
 msgid "Support interface fan speed"
 msgstr "지지대 접점 팬 속도"
@@ -11158,7 +11162,7 @@ msgstr ""
 "수 있는지를 결정합니다"
 
 msgid "Undefine"
-msgstr "알수없음"
+msgstr "알 수 없음"
 
 msgid "Hardened steel"
 msgstr "경화강"
@@ -11167,7 +11171,7 @@ msgid "Stainless steel"
 msgstr "스테인레스강 노즐"
 
 msgid "Brass"
-msgstr "동 노즐"
+msgstr "황동 노즐"
 
 msgid "Nozzle HRC"
 msgstr "노즐 록웰 경도"
@@ -13359,7 +13363,7 @@ msgstr ""
 "기"
 
 msgid "Format of G-code thumbnails"
-msgstr "G코드 미리보기 포맷"
+msgstr "G코드 미리보기 형식"
 
 msgid ""
 "Format of G-code thumbnails: PNG for best quality, JPG for smallest size, "
@@ -13674,7 +13678,7 @@ msgid "Number of toolchanges during the print."
 msgstr "출력 중 도구 교환 횟수."
 
 msgid "Total volume"
-msgstr "총량"
+msgstr "총 부피"
 
 msgid "Total volume of filament used during the entire print."
 msgstr "전체 프린트 중에 사용된 필라멘트의 총량입니다."
@@ -14295,14 +14299,13 @@ msgid ""
 "Only one of the results with the same name will be saved. Are you sure you "
 "want to override the other results?"
 msgstr ""
-"Only one of the results with the same name will be saved. Are you sure you "
-"want to replace the other results?"
+"단 하나의 결과만을 같은 이름으로 저장할 수 있습니다. 다른 결과들을 덮어쓸까요?"
 
 msgid "Please find the best line on your plate"
 msgstr "당신의 플레이트에서 가장 좋은 선을 찾아보세요"
 
 msgid "Please find the corner with perfect degree of extrusion"
-msgstr "Please find the corner with the perfect degree of extrusion"
+msgstr "사출 품질이 제일 좋은 모서리를 찾아보세요"
 
 msgid "Input Value"
 msgstr "입력값"
@@ -14468,7 +14471,7 @@ msgid "The filament must be selected."
 msgstr "필라멘트를 선택해야 합니다."
 
 msgid "Network lookup"
-msgstr "네트워크 조회"
+msgstr "네트워크 검색"
 
 msgid "Address"
 msgstr "주소"
@@ -14555,6 +14558,9 @@ msgstr "ABS/ASA"
 msgid "PETG"
 msgstr "PETG"
 
+msgid "PCTG"
+msgstr "PCTG"
+
 msgid "TPU"
 msgstr "TPU"
 
@@ -14651,6 +14657,9 @@ msgstr "필요한 경우 슬래시( / )를 디렉토리 구분 기호로 사용
 msgid "Upload to storage"
 msgstr "저장소에 업로드"
 
+msgid "Switch to Device tab after upload."
+msgstr "업로드 후 기기 탭으로 전환"
+
 #, c-format, boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr "업로드 파일 이름이 \"%s\"로 끝나지 않습니다. 계속하시겠습니까?"
@@ -14930,13 +14939,13 @@ msgid "Hot Bed STL"
 msgstr "베드 STL"
 
 msgid "Load stl"
-msgstr "STL 로드"
+msgstr "STL 불러오기"
 
 msgid "Hot Bed SVG"
 msgstr "베드 SVG"
 
 msgid "Load svg"
-msgstr "SVG 로드"
+msgstr "SVG 불러오기"
 
 msgid "Max Print Height"
 msgstr "최대 출력 높이"
@@ -15088,8 +15097,8 @@ msgid ""
 msgstr ""
 "\n"
 "\n"
-"Studio에서는 사용자 사전 설정 동기화 기능이 활성화되어 있지 않아 장치 페이지"
-"에서 필라멘트 설정이 실패할 수 있음을 감지했습니다.\n"
+"Orca에서는 사용자 사전 설정 동기화 기능이 활성화되어 있지 않아 장치 페이지에"
+"서 필라멘트 설정이 실패할 수 있음을 감지했습니다.\n"
 "동기화 기능을 활성화하려면 \"사용자 사전 설정 동기화\"를 클릭하세요."
 
 msgid "Printer Setting"
@@ -15149,7 +15158,7 @@ msgid ""
 "User's fillment preset set. \n"
 "Can be shared with others."
 msgstr ""
-"사용자 채우기 사전 설정입니다.\n"
+"사용자의 필라멘트 사전 설정입니다.\n"
 "다른 사람과 공유할 수 있습니다."
 
 msgid ""
@@ -15316,6 +15325,12 @@ msgstr "정말 로그아웃하시겠습니까?"
 msgid "Refresh Printers"
 msgstr "프린터 새로 고침"
 
+msgid "View print host webui in Device tab"
+msgstr "기기 탭에서 출력 호스트의 웹UI 표시"
+
+msgid "Replace the BambuLab's device tab with print host webui"
+msgstr "뱀부랩의 기기 탭을 출력 호스트의 웹UI로 교체"
+
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
 "signed certificate."
@@ -15390,7 +15405,8 @@ msgid ""
 "Note: FlashAir with firmware 2.00.02 or newer and activated upload function "
 "is required."
 msgstr ""
-"참고: 펌웨어 2.00.02 이상이 있고 업로드 기능이 활성화된 FlashAir필수입니다."
+"참고: 펌웨어 2.00.02 또는 이후 버전을 사용중이며 업로드 기능이 활성화된 "
+"FlashAir가 필요합니다."
 
 msgid "Connection to MKS works correctly."
 msgstr "MKS에 대한 연결이 올바르게 작동합니다."
@@ -15729,20 +15745,16 @@ msgstr "SimplyPrint에 성공적으로 연결되었습니다!"
 msgid "Could not connect to SimplyPrint"
 msgstr "SimplyPrint에 연결할 수 없습니다"
 
-msgid "SimplyPrint account not linked. Go to Connect options to set it up."
-msgstr ""
-"SimplyPrint 계정이 연결되지 않았습니다. 연결 옵션으로 이동하여 설정합니다."
-
-msgid ""
-"File size exceeds the 100MB upload limit. Please upload your file through "
-"the panel."
-msgstr ""
-"파일 크기가 업로드 제한인 100MB를 초과했습니다. 패널을 통해 파일을 업로드하세"
-"요."
+msgid "Internal error"
+msgstr "내부 오류"
 
 msgid "Unknown error"
 msgstr "알 수 없는 오류"
 
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+"SimplyPrint 계정이 연결되지 않았습니다. 연결 옵션으로 이동하여 설정합니다."
+
 msgid "Connection to Flashforge works correctly."
 msgstr "플래시포지 연결이 정상적으로 작동합니다."
 
@@ -15769,8 +15781,7 @@ msgid ""
 "consistency?"
 msgstr ""
 "정밀한 벽\n"
-"정확한 벽을 켜면 정밀도와 레이어 일관성이 향상될 수 있다는 사실을 알고 계셨습"
-"니까?"
+"정밀한 벽을 켜면 정밀도와 레이어 일관성이 향상될 수 있다는 사실을 알고 계셨나요?"
 
 #: resources/data/hints.ini: [hint:Sandwich mode]
 msgid ""
@@ -15789,7 +15800,7 @@ msgid ""
 "Did you know that OrcaSlicer supports chamber temperature?"
 msgstr ""
 "챔버 온도\n"
-"OrcaSlicer가 챔버 온도를 지원한다는 사실을 알고 계셨나요?"
+"OrcaSlicer가 챔버 온도 설정을 지원한다는 사실을 알고 계셨나요?"
 
 #: resources/data/hints.ini: [hint:Calibration]
 msgid ""
@@ -15815,7 +15826,7 @@ msgid ""
 "Did you know that OrcaSlicer can support Air filtration/Exhaust Fan?"
 msgstr ""
 "공기 여과/배기 팬\n"
-"오르카 슬라이서가 공기 여과/배기 팬을 지원할 수 있다는 사실을 알고 계셨나요?"
+"오르카 슬라이서가 공기 여과/배기 팬을 지원한다는 사실을 알고 계셨나요?"
 
 #: resources/data/hints.ini: [hint:G-code window]
 msgid ""
@@ -15842,7 +15853,7 @@ msgid ""
 "3D scene operations."
 msgstr ""
 "키보드 단축키를 사용하는 방법\n"
-"Orca Slicer가 다양한 키보드 단축키와 3D 장면 작업을 제공합니다."
+"Orca Slicer는 다양한 키보드 단축키와 3D 장면 작업을 제공합니다."
 
 #: resources/data/hints.ini: [hint:Reverse on odd]
 msgid ""
@@ -15852,7 +15863,7 @@ msgid ""
 msgstr ""
 "홀수에 반전\n"
 "<b>홀수면 반전</b> 기능이 오버행의 표면 품질을 크게 향상시킬 수 있다는 사실"
-"을 알고 계셨습니까?"
+"을 알고 계셨나요?"
 
 #: resources/data/hints.ini: [hint:Cut Tool]
 msgid ""
@@ -15861,7 +15872,7 @@ msgid ""
 "cutting tool?"
 msgstr ""
 "절단 도구\n"
-"커팅 툴로 원하는 각도와 위치에서 모델을 커팅할 수 있다는 사실을 알고 계셨나"
+"절단 도구로 원하는 각도와 위치에서 모델을 자를 수 있다는 사실을 알고 계셨나"
 "요?"
 
 #: resources/data/hints.ini: [hint:Fix Model]
@@ -15872,7 +15883,7 @@ msgid ""
 msgstr ""
 "모델 수정\n"
 "Windows 시스템에서 많은 슬라이싱 문제를 피하기 위해 손상된 3D 모델을 수정할 "
-"수 있다는 것을 알고 계셨습니까?"
+"수 있다는 것을 알고 계섰나요?"
 
 #: resources/data/hints.ini: [hint:Timelapse]
 msgid ""
@@ -15880,7 +15891,7 @@ msgid ""
 "Did you know that you can generate a timelapse video during each print?"
 msgstr ""
 "타임랩스\n"
-"각 출력 중에 타임랩스 비디오를 생성할 수 있다는 것을 알고 계셨습니까?"
+"각 출력 중에 타임랩스 비디오를 생성할 수 있다는 것을 알고 계섰나요?"
 
 #: resources/data/hints.ini: [hint:Auto-Arrange]
 msgid ""
@@ -15888,7 +15899,7 @@ msgid ""
 "Did you know that you can auto-arrange all objects in your project?"
 msgstr ""
 "자동 정렬\n"
-"프로젝트의 모든 개체를 자동 정렬할 수 있다는 것을 알고 계셨습니까?"
+"프로젝트의 모든 개체를 자동 정렬할 수 있다는 것을 알고 계섰나요?"
 
 #: resources/data/hints.ini: [hint:Auto-Orient]
 msgid ""
@@ -15898,7 +15909,7 @@ msgid ""
 msgstr ""
 "자동 방향 지정\n"
 "간단한 클릭만으로 개체를 최적의 출력 방향으로 회전할 수 있다는 것을 알고 계셨"
-"습니까?"
+"나요?"
 
 #: resources/data/hints.ini: [hint:Lay on Face]
 msgid ""
@@ -15909,7 +15920,7 @@ msgid ""
 msgstr ""
 "면에 위치\n"
 "모델의 바닥 표면을 빠르게 지정하여 출력 베드에 놓을 수 있다는 것을 알고 계셨"
-"습니까? 면에 배치 기능을 선택하십시오. 또는<b>F</b> 키를 누르세요."
+"나요? 면에 배치 기능을 선택하십시오. 또는<b>F</b> 키를 누르세요."
 
 #: resources/data/hints.ini: [hint:Object List]
 msgid ""
@@ -15919,7 +15930,7 @@ msgid ""
 msgstr ""
 "개체 목록\n"
 "목록의 모든 개체/부품을 보고 각 개체/부품에 대한 설정을 변경할 수 있다는 것"
-"을 알고 있습니까?"
+"을 알고 계섰나요?"
 
 #: resources/data/hints.ini: [hint:Search Functionality]
 msgid ""
@@ -15928,8 +15939,8 @@ msgid ""
 "Slicer setting?"
 msgstr ""
 "검색 기능\n"
-"특정 Orca Slicer 설정을 빠르게 찾기 위해 검색 도구를 사용한다는 사실을 알고 "
-"계셨습니까?"
+"검색 도구를 사용하여 원하는 Orca Slicer 설정을 빠르게 찾을 수 있다는 사실을 알고 "
+"계섰나요?"
 
 #: resources/data/hints.ini: [hint:Simplify Model]
 msgid ""
@@ -15939,7 +15950,7 @@ msgid ""
 msgstr ""
 "모델 단순화\n"
 "메쉬 단순화 기능을 사용하여 메쉬의 삼각형 수를 줄일 수 있다는 것을 알고 계셨"
-"습니까? 모델을 마우스 오른쪽 버튼으로 클릭하고 모델 단순화를 선택합니다."
+"나요? 모델을 마우스 오른쪽 버튼으로 클릭하고 모델 단순화를 선택하세요."
 
 #: resources/data/hints.ini: [hint:Slicing Parameter Table]
 msgid ""
@@ -15949,7 +15960,7 @@ msgid ""
 msgstr ""
 "슬라이싱 매개변수 테이블\n"
 "테이블의 모든 개체/부품을 보고 각 개체/부품에 대한 설정을 변경할 수 있다는 것"
-"을 알고 있습니까?"
+"을 알고 계섰나요?"
 
 #: resources/data/hints.ini: [hint:Split to Objects/Parts]
 msgid ""
@@ -15959,7 +15970,7 @@ msgid ""
 msgstr ""
 "개체/부품으로 분할\n"
 "쉽게 색칠하거나 출력하기 위해 큰 개체를 작은 개체로 나눌 수 있다는 것을 알고 "
-"있습니까?"
+"계섰나요?"
 
 #: resources/data/hints.ini: [hint:Subtract a Part]
 msgid ""
@@ -15970,7 +15981,7 @@ msgid ""
 msgstr ""
 "부품 빼기\n"
 "네거티브 부분 수정자를 사용하여 하나의 메시를 다른 메시에서 뺄 수 있다는 것"
-"을 알고 계셨습니까? 예를 들어, 이렇게 하면 Orca Slicer에서 직접 쉽게 크기 조"
+"을 알고 계섰나요? 예를 들어, 이렇게 하면 Orca Slicer에서 직접 쉽게 크기 조"
 "정이 가능한 구멍을 만들 수 있습니다."
 
 #: resources/data/hints.ini: [hint:STEP]
@@ -15983,7 +15994,7 @@ msgid ""
 msgstr ""
 "STEP\n"
 "STL 대신 STEP 파일을 슬라이싱하여 출력 품질을 향상시킬 수 있다는 사실을 알고 "
-"있습니까?\n"
+"계섰나요?\n"
 "Orca Slicer는 STEP 파일 슬라이싱을 지원하여 저해상도 STL보다 부드러운 결과를 "
 "제공합니다. 시도해 보세요!"
 
@@ -15996,7 +16007,7 @@ msgid ""
 msgstr ""
 "Z 솔기 위치\n"
 "Z 솔기의 위치를 사용자 정의하고 출력물에 칠하여 잘 보이지 않는 위치에 배치할 "
-"수 있다는 사실을 알고 있습니까? 이렇게 하면 모델의 전반적인 모양이 향상됩니"
+"수 있다는 사실을 알고 계섰나요? 이렇게 하면 모델의 전반적인 모양이 향상됩니"
 "다. 확인해 보세요!"
 
 #: resources/data/hints.ini: [hint:Fine-tuning for flow rate]
@@ -16020,7 +16031,7 @@ msgid ""
 msgstr ""
 "출력을 플레이트로 분할\n"
 "부품이 많은 모델을 출력할 준비가 된 개별 플레이트로 분할할 수 있다는 사실을 "
-"알고 있습니까? 이렇게 하면 모든 부품을 추적하는 프로세스가 간소화됩니다."
+"알고 계섰나요? 이렇게 하면 모든 부품을 추적하는 프로세스가 간소화됩니다."
 
 #: resources/data/hints.ini: [hint:Speed up your print with Adaptive Layer
 #: Height]
@@ -16031,7 +16042,7 @@ msgid ""
 msgstr ""
 "적응형 레이어 높이로 출력 속도를 높이세요\n"
 "적응형 레이어를 사용하면 모델을 더욱 빠르게 프린트할 수 있다는 사실을 알고 계"
-"셨습니까?레이어 높이 옵션을 확인해 보세요!"
+"셨나요? 레이어 높이 옵션을 확인해 보세요!"
 
 #: resources/data/hints.ini: [hint:Support painting]
 msgid ""
@@ -16041,7 +16052,7 @@ msgid ""
 "model that actually need it."
 msgstr ""
 "지지대 칠하기\n"
-"지지대의 위치를 칠할 수 있다는 것을 알고 있습니까? 이 기능을 사용하면 실제로 "
+"지지대의 위치를 칠할 수 있다는 것을 알고 계섰나요? 이 기능을 사용하면 실제로 "
 "필요한 모델 부위에만 지지대 재료를 쉽게 배치할 수 있습니다."
 
 #: resources/data/hints.ini: [hint:Different types of supports]
@@ -16052,7 +16063,7 @@ msgid ""
 "print speed. Check them out!"
 msgstr ""
 "다양한 유형의 지지대\n"
-"여러 유형의 지지대 중에서 선택할 수 있다는 것을 알고 있습니까? 나무 지지대는 "
+"여러 유형의 지지대 중에서 선택할 수 있다는 것을 알고 계섰나요? 나무 지지대는 "
 "필라멘트를 절약하고 출력 속도를 향상시키면서 유기 모델에 적합합니다. 확인해 "
 "보세요!"
 
@@ -16064,7 +16075,7 @@ msgid ""
 "the best results."
 msgstr ""
 "실크 필라멘트 출력\n"
-"실크 필라멘트를 성공적으로 프린팅하려면 특별한 주의가 필요하다는 사실을 알고 "
+"실크 필라멘트를 성공적으로 출력하려면 특별한 주의가 필요하다는 사실을 알고 "
 "계셨나요? 최상의 결과를 얻으려면 항상 더 높은 온도와 더 낮은 속도를 권장합니"
 "다."
 
@@ -16076,7 +16087,7 @@ msgid ""
 msgstr ""
 "접착력이 더 좋아지는 브림\n"
 "모델을 출력할 때 베드 표면과의 접촉면이 작을 경우 브림을 사용하는 것이 권장된"
-"다는 사실을 알고 계셨습니까?"
+"다는 사실을 알고 계섰나요?"
 
 #: resources/data/hints.ini: [hint:Set parameters for multiple objects]
 msgid ""
@@ -16086,7 +16097,7 @@ msgid ""
 msgstr ""
 "여러 개체에 대한 매개변수 설정\n"
 "선택한 모든 개체에 대한 슬라이싱 매개변수를 한 번에 설정할 수 있다는 사실을 "
-"알고 있습니까?"
+"알고 계섰나요?"
 
 #: resources/data/hints.ini: [hint:Stack objects]
 msgid ""
@@ -16094,7 +16105,7 @@ msgid ""
 "Did you know that you can stack objects as a whole one?"
 msgstr ""
 "개체 쌓기\n"
-"물건을 통째로 쌓을 수 있다는 사실을 알고 있습니까?"
+"물건을 통째로 쌓을 수 있다는 사실을 알고 계섰나요?"
 
 #: resources/data/hints.ini: [hint:Flush into support/objects/infill]
 msgid ""
@@ -16102,9 +16113,9 @@ msgid ""
 "Did you know that you can save the wasted filament by flushing them into "
 "support/objects/infill during filament change?"
 msgstr ""
-"지지대/개체/채우기에 버리기\n"
-"필라멘트를 교체하는 동안 낭비되는 필라멘트를 지지대/개체/채우기에 버리기하여 "
-"절약할 수 있다는 사실을 알고 있습니까?"
+"지지대/개체/채우기에 내보내기\n"
+"필라멘트를 교체하는 동안 낭비되는 필라멘트를 지지대/개체/채우기 출력에 활용할 "
+"수 있다는 사실을 알고 계섰나요?"
 
 #: resources/data/hints.ini: [hint:Improve strength]
 msgid ""
@@ -16114,7 +16125,7 @@ msgid ""
 msgstr ""
 "강도 향상\n"
 "모델의 강도를 개선하기 위해 더 많은 벽 루프와 더 높은 드문 채우기 밀도를 사용"
-"할 수 있다는 것을 알고 있습니까?"
+"할 수 있다는 것을 알고 계섰나요?"
 
 #: resources/data/hints.ini: [hint:When need to print with the printer door
 #: opened]
@@ -16126,7 +16137,7 @@ msgid ""
 msgstr ""
 "프린터 도어를 연 상태로 출력해야 하는 경우\n"
 "더 높은 프린터 내부 온도로 낮은 온도의 필라멘트를 출력할 때 프린터 도어를 열"
-"면 압출기/핫엔드가 막힐 가능성을 줄일 수 있다는 것을 알고 계셨습니까? 이에 대"
+"면 압출기/핫엔드가 막힐 가능성을 줄일 수 있다는 것을 알고 계섰나요? 이에 대"
 "한 자세한 내용은 Wiki에서 확인하세요."
 
 #: resources/data/hints.ini: [hint:Avoid warping]
@@ -16140,6 +16151,13 @@ msgstr ""
 "ABS 등 뒤틀림이 발생하기 쉬운 소재를 출력할 때, 히트베드 온도를 적절하게 높이"
 "면 뒤틀림 가능성을 줄일 수 있다는 사실을 알고 계셨나요?"
 
+#~ msgid ""
+#~ "File size exceeds the 100MB upload limit. Please upload your file through "
+#~ "the panel."
+#~ msgstr ""
+#~ "파일 크기가 업로드 제한인 100MB를 초과했습니다. 패널을 통해 파일을 업로드"
+#~ "하세요."
+
 #~ msgid "Please input a valid value (K in 0~0.3)"
 #~ msgstr "유효한 값을 입력하세요(K는 0~0.3)"
 

localization/i18n/nl/OrcaSlicer_nl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-06-16 23:01+0800\n"
+"POT-Creation-Date: 2024-06-21 20:03+0800\n"
 "Language: nl\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -14455,6 +14455,9 @@ msgstr "ABS/ASA"
 msgid "PETG"
 msgstr "PETG"
 
+msgid "PCTG"
+msgstr ""
+
 msgid "TPU"
 msgstr "TPU"
 
@@ -14540,6 +14543,9 @@ msgstr ""
 msgid "Upload to storage"
 msgstr ""
 
+msgid "Switch to Device tab after upload."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr "De bestandsnaam van de upload eindigt niet op \"%s\". Wilt u doorgaan?"
@@ -15206,6 +15212,12 @@ msgstr ""
 msgid "Refresh Printers"
 msgstr "Printers vernieuwen"
 
+msgid "View print host webui in Device tab"
+msgstr ""
+
+msgid "Replace the BambuLab's device tab with print host webui"
+msgstr ""
+
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
 "signed certificate."
@@ -15635,17 +15647,15 @@ msgstr ""
 msgid "Could not connect to SimplyPrint"
 msgstr ""
 
-msgid "SimplyPrint account not linked. Go to Connect options to set it up."
-msgstr ""
-
-msgid ""
-"File size exceeds the 100MB upload limit. Please upload your file through "
-"the panel."
+msgid "Internal error"
 msgstr ""
 
 msgid "Unknown error"
 msgstr ""
 
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
 msgid "Connection to Flashforge works correctly."
 msgstr ""
 

localization/i18n/pl/OrcaSlicer_pl.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: OrcaSlicer 2.1\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-06-16 23:01+0800\n"
+"POT-Creation-Date: 2024-06-21 20:03+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: Krzysztof Morga <tlumaczeniebs@gmail.com>\n"
 "Language-Team: \n"
@@ -1772,10 +1772,10 @@ msgid "Set as individual objects"
 msgstr "Ustaw jako osobne obiekty"
 
 msgid "Fill bed with copies"
-msgstr "Wypełnij stół kopiami modelu"
+msgstr "Wypełnij stół kopią modelu"
 
 msgid "Fill the remaining area of bed with copies of the selected object"
-msgstr "Uzupełnij pozostałą powierzchnię stołu kopiami wybranego obiektu"
+msgstr "Uzupełnij pozostałą powierzchnię stołu kopią wybranego obiektu"
 
 msgid "Printable"
 msgstr "Do druku"
@@ -2872,11 +2872,12 @@ msgstr "Najpierw musisz wybrać typ i kolor filamentu."
 
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f)"
-msgstr ""
+msgstr "Proszę podać prawidłową wartość (K w zakresie %.1f~%.1f)"
 
 #, c-format, boost-format
 msgid "Please input a valid value (K in %.1f~%.1f, N in %.1f~%.1f)"
 msgstr ""
+"Proszę podać prawidłową wartość (K w zakresie %.1f~%.1f, N in %.1f~%.1f)"
 
 msgid "Other Color"
 msgstr "Inny kolor"
@@ -3310,11 +3311,11 @@ msgid "Edit multiple printers"
 msgstr "Edycja drukarek"
 
 msgid "Select connected printers (0/6)"
-msgstr ""
+msgstr "Wybierz podłączone drukarki (0/6)"
 
 #, c-format, boost-format
 msgid "Select Connected Printers (%d/6)"
-msgstr ""
+msgstr "Wybierz Podłączone Drukarki (%d/6)"
 
 #, c-format, boost-format
 msgid "The maximum number of printers that can be selected is %d"
@@ -3377,7 +3378,7 @@ msgid "Printing Failed"
 msgstr "Drukowanie nie powiodło się"
 
 msgid "Printing Pause"
-msgstr ""
+msgstr "Drukowanie wstrzymane"
 
 msgid "Prepare"
 msgstr "Przygotowanie"
@@ -4874,7 +4875,7 @@ msgid "Flow rate"
 msgstr "Natężenie przepływu"
 
 msgid "Pressure advance"
-msgstr "Kalibracja PA"
+msgstr "Wzrost ciśnienia (PA)"
 
 msgid "Retraction test"
 msgstr "Test Retrakcji"
@@ -8359,54 +8360,58 @@ msgid "The configuration is up to date."
 msgstr "Konfiguracja jest aktualna."
 
 msgid "Obj file Import color"
-msgstr ""
+msgstr "Importuj kolory z pliku .OBJ"
 
 msgid "Specify number of colors:"
-msgstr ""
+msgstr "Podaj liczbę kolorów:"
 
 #, c-format, boost-format
 msgid "The color count should be in range [%d, %d]."
-msgstr ""
+msgstr "Liczba kolorów powinna mieścić się w zakresie [%d, %d]."
 
 msgid "Recommended "
-msgstr ""
+msgstr "Zalecane "
 
 msgid "Current filament colors:"
-msgstr ""
+msgstr "Aktualne kolory filamentów:"
 
 msgid "Quick set:"
-msgstr ""
+msgstr "Szybkie ustawienie:"
 
 msgid "Color match"
-msgstr ""
+msgstr "Dopasowanie koloru"
 
 msgid "Approximate color matching."
-msgstr ""
+msgstr "Przybliżone dopasowanie kolorów."
 
 msgid "Append"
-msgstr ""
+msgstr "Dołącz"
 
 msgid "Add consumable extruder after existing extruders."
-msgstr ""
+msgstr "Dodaj ekstruder do użycia po już istniejących ekstruderach"
 
 msgid "Reset mapped extruders."
-msgstr ""
+msgstr "Zresetuj przypisane ekstrudery."
 
 msgid "Cluster colors"
-msgstr ""
+msgstr "Klasteryzacja kolorów"
 
 msgid "Map Filament"
-msgstr ""
+msgstr "Przypisz filament"
 
 msgid ""
 "Note:The color has been selected, you can choose OK \n"
 " to continue or manually adjust it."
 msgstr ""
+"Uwaga: Kolor został wybrany. Możesz kliknąć OK \n"
+"aby kontynuować, lub dostosować go ręcznie."
 
 msgid ""
 "Waring:The count of newly added and \n"
 " current extruders exceeds 16."
 msgstr ""
+"Ostrzeżenie: Suma nowo dodanych i \n"
+"  obecnych ekstruderów przekracza 16."
 
 msgid "Ramming customization"
 msgstr "Dostosowanie wyciskania"
@@ -8512,7 +8517,8 @@ msgid ""
 "install BambuStutio or seek after-sales help."
 msgstr ""
 "Brakujący komponent BambuSource zarejestrowany do odtwarzania mediów! Proszę "
-"ponownie zainstalować OrcaSlicer lub skonsultować się z pomocą posprzedażową."
+"ponownie zainstalować OrcaSlicer lub skonsultować się z pomocą po-"
+"sprzedażową."
 
 msgid ""
 "Using a BambuSource from a different install, video play may not work "
@@ -10816,19 +10822,19 @@ msgstr ""
 "powierzchnię, gdy występuje lekkie przelewanie lub niedomiar"
 
 msgid "Enable pressure advance"
-msgstr "Włącz przyspieszenie ciśnienia"
+msgstr "Włącz wzrost ciśnienia (PA)"
 
 msgid ""
 "Enable pressure advance, auto calibration result will be overwriten once "
 "enabled."
 msgstr ""
-"Włącz przyspieszenie ciśnienia, wynik automatycznej kalibracji zostanie "
+"Włącz wzrost ciśnienia (PA), wynik automatycznej kalibracji zostanie "
 "nadpisany po włączeniu."
 
 msgid "Pressure advance(Klipper) AKA Linear advance factor(Marlin)"
 msgstr ""
-"Przyspieszenie ciśnienia (Klipper), znane również jako współczynnik "
-"przyspieszenia liniowego (Marlin)."
+"Pressure advance (Klipper), znane również jako współczynnik przyspieszenia "
+"liniowego (Marlin)."
 
 msgid ""
 "Default line width if other line widths are set to 0. If expressed as a %, "
@@ -10849,7 +10855,7 @@ msgstr ""
 "zmniejszyć częstotliwość włączania i wyłączania"
 
 msgid "Don't slow down outer walls"
-msgstr ""
+msgstr "Nie spowalniaj zewnętrznych ścian"
 
 msgid ""
 "If enabled, this setting will ensure external perimeters are not slowed down "
@@ -10863,6 +10869,15 @@ msgid ""
 "external walls\n"
 "\n"
 msgstr ""
+"Jeśli ta opcja jest włączona, zapewni to, że zewnętrzne obwody nie będą "
+"spowalniane, aby spełnić minimalny czas warstwy. Jest to szczególnie pomocne "
+"w poniższych sytuacjach:\n"
+"\n"
+"1. Aby uniknąć zmian połysku podczas drukowania filamentami z połuskiem.\n"
+"2. Aby uniknąć zmian prędkości zewnętrznych ścian, które mogą powodować "
+"drobne artefakty ścian, przypominające zygzaki.\n"
+"3. Aby uniknąć drukowania z prędkościami, które powodują powstawanie "
+"drobnych artefaktów (VFA) na zewnętrznych ścianach.\n"
 
 msgid "Layer time"
 msgstr "Czas warstwy"
@@ -14775,6 +14790,26 @@ msgid ""
 "cause the result not exactly the same in each calibration. We are still "
 "investigating the root cause to do improvements with new updates."
 msgstr ""
+"Proszę znaleźć szczegóły dotyczące kalibracji dynamiki przepływu w naszej "
+"wiki.\n"
+"\n"
+"Zazwyczaj kalibracja nie jest konieczna. Gdy rozpoczynasz druk w jednym "
+"kolorze/materiale i zaznaczasz opcję \"kalibracja dynamiki przepływu\" w "
+"menu rozpoczęcia druku - drukarka będzie postępować w tradycyjny sposób, "
+"kalibrując filament przed rozpoczęciem druku. W przypadku druku w wielu "
+"kolorach/materiałach drukarka będzie używać domyślnego parametru kompensacji "
+"dla filamentu podczas każdej jego zmiany, co w większości przypadków daje "
+"dobre rezultaty.\n"
+"\n"
+"Proszę jednak zauważyć, że istnieją pewne przypadki, w których wynik "
+"kalibracji może być niesolidny: korzystanie z Texture PEI do kalibracji; "
+"brak dobrej przyczepności podłoża (proszę umyć płytę lub nałożyć klej!)... "
+"Więcej informacji można znaleźć w naszej wiki.\n"
+"\n"
+"Wyniki kalibracji mają około 10 procent fluktuacji w naszych testach, co "
+"może powodować, że wynik nie będzie dokładnie taki sam w każdej kalibracji. "
+"Wciąż badamy źródło tych fluktuacji i pracujemy nad wprowadzeniem ulepszeń w "
+"nowych aktualizacjach."
 
 msgid "When to use Flow Rate Calibration"
 msgstr "Kiedy użyć Kalibracji Natężenia Przepływu"
@@ -14910,12 +14945,14 @@ msgid ""
 "Only one of the results with the same name will be saved. Are you sure you "
 "want to override the other results?"
 msgstr ""
+"Tylko jeden z wyników o tej samej nazwie zostanie zapisany. Czy na pewno "
+"chcesz zastąpić inne wyniki?"
 
 msgid "Please find the best line on your plate"
 msgstr "Znajdź najlepszą linię na swojej płycie"
 
 msgid "Please find the corner with perfect degree of extrusion"
-msgstr ""
+msgstr "Znajdź róg z idealnym stopniem ekstruzji"
 
 msgid "Input Value"
 msgstr "Wartość wejściowa"
@@ -15171,6 +15208,9 @@ msgstr "ABS/ASA"
 msgid "PETG"
 msgstr "PETG"
 
+msgid "PCTG"
+msgstr ""
+
 msgid "TPU"
 msgstr "TPU"
 
@@ -15269,6 +15309,9 @@ msgstr ""
 msgid "Upload to storage"
 msgstr "Prześlij do pamięci"
 
+msgid "Switch to Device tab after upload."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr ""
@@ -15958,6 +16001,12 @@ msgstr "Czy na pewno chcesz się wylogować?"
 msgid "Refresh Printers"
 msgstr "Odśwież drukarki"
 
+msgid "View print host webui in Device tab"
+msgstr ""
+
+msgid "Replace the BambuLab's device tab with print host webui"
+msgstr ""
+
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
 "signed certificate."
@@ -16404,21 +16453,17 @@ msgstr "Pomyślnie połączono z SimplyPrint!"
 msgid "Could not connect to SimplyPrint"
 msgstr "Nie można połączyć się z SimplyPrint"
 
+msgid "Internal error"
+msgstr ""
+
+msgid "Unknown error"
+msgstr "Nieznany błąd"
+
 msgid "SimplyPrint account not linked. Go to Connect options to set it up."
 msgstr ""
 "Nie połączono z kontem SimplyPrint. Przejdź do opcji Połącz, aby go "
 "skonfigurować."
 
-msgid ""
-"File size exceeds the 100MB upload limit. Please upload your file through "
-"the panel."
-msgstr ""
-"Rozmiar pliku przekracza limit przesyłania 100 MB. Proszę przesłać plik za "
-"pomocą panelu."
-
-msgid "Unknown error"
-msgstr "Nieznany błąd"
-
 msgid "Connection to Flashforge works correctly."
 msgstr "Połączenie z Flashforge działa poprawnie."
 
@@ -16825,76 +16870,97 @@ msgstr ""
 "takimi jak ABS, odpowiednie zwiększenie temperatury podgrzewanej płyty może "
 "zmniejszyć prawdopodobieństwo odkształceń."
 
-#~ msgid "Please input a valid value (K in 0~0.3)"
-#~ msgstr "Proszę podać prawidłową wartość (K w zakresie od 0 do 0.3)"
-
-#~ msgid "Please input a valid value (K in 0~0.3, N in 0.6~2.0)"
+#~ msgid ""
+#~ "File size exceeds the 100MB upload limit. Please upload your file through "
+#~ "the panel."
 #~ msgstr ""
-#~ "Proszę podać prawidłową wartość (K w zakresie od 0 do 0.3, N w zakresie "
-#~ "od 0.6 do 2.0)"
+#~ "Rozmiar pliku przekracza limit przesyłania 100 MB. Proszę przesłać plik "
+#~ "za pomocą panelu."
 
-#~ msgid "Select connected printetrs (0/6)"
-#~ msgstr "Wybierz podłączone drukarki (0/6)"
+#~ msgid "Enable adaptive pressure advance (beta)"
+#~ msgstr "Włącz adaptacyjny wzrost ciśnienia (beta)"
 
-#, c-format, boost-format
-#~ msgid "Select Connected Printetrs (%d/6)"
-#~ msgstr "Wybierz Podłączone Drukarki (%d/6)"
+#~ msgid ""
+#~ "With increasing print speeds, it has been observed that the effective PA "
+#~ "value typically decreases. This means that a single PA value is not 100% "
+#~ "optimal for all features and a compromise value is usually used, that "
+#~ "does not cause too much bulging on slower features while also not causing "
+#~ "gaps on faster features.\n"
+#~ "\n"
+#~ "This feature aims to address this limitation by modeling the response of "
+#~ "your printer's extrusion system depending on the speed it is printing at. "
+#~ "Internally it generates a fitted model that can extrapolate the needed "
+#~ "pressure advance for any given print speed, which is then emmited to the "
+#~ "printer depending on the current print speed.\n"
+#~ "\n"
+#~ "When enabled the pressure advance value above is overriden. However, a "
+#~ "reasonable default value above isstrongly recomended to act as a fallback "
+#~ "in case the model calculations fail."
+#~ msgstr ""
+#~ "Wraz ze wzrostem prędkości druku zaobserwowano, że efektywna wartość PA "
+#~ "zazwyczaj maleje. Oznacza to, że pojedyncza wartość PA nie jest w 100% "
+#~ "optymalna dla wszystkich elementów i zwykle stosowana jest wartość "
+#~ "kompromisowa, która nie powoduje zbyt dużego \"wypuklenia\" na elementach "
+#~ "drukowanych wolniej, a jednocześnie nie powoduje przerw na elementach "
+#~ "drukowanych szybciej.\n"
+#~ "\n"
+#~ "Ta funkcja ma na celu rozwiązanie tego ograniczenia poprzez modelowanie "
+#~ "reakcji ekstrudera w zależności od prędkości drukowania. Wewnętrznie "
+#~ "generuje dopasowany model, który może przewidzieć jakie będzie wymagane "
+#~ "ciśnienie dla dowolnej prędkości drukowania, który jest następnie "
+#~ "przekazywany do drukarki w zależności od bieżącej prędkości druku.\n"
+#~ "\n"
+#~ "Po włączeniu powyższa wartość PA jest nadpisywana. Zdecydowanie zaleca "
+#~ "się jednak przyjęcie rozsądnej wartości domyślnej, która będzie działać "
+#~ "jako rozwiązanie awaryjne w przypadku nieprawidłowych obliczeń dla modelu."
 
-#~ msgid "PrintingPause"
-#~ msgstr "Drukowanie zatrzymane"
+#~ msgid "Adaptive pressure advance measurements (beta)"
+#~ msgstr "Adaptacyjny pomiar ciśnienia (beta)"
+
+#~ msgid ""
+#~ "Add pairs of pressure advance values and the speed they were measured at, "
+#~ "separated by a coma. One set of values per line. For example\n"
+#~ "0.03,100\n"
+#~ "0.027,150 etc.\n"
+#~ "\n"
+#~ "How to calibrate:\n"
+#~ "1. Run the pressure advance test for at least 3 speeds per filament. It "
+#~ "is recommended that the test is runfor at least the speed of the external "
+#~ "perimeters, the speed of the internal perimeters and the fastest feature "
+#~ "print speed in your profile (usually its the sparse or solid infill\n"
+#~ "2. Take note of the optimal Pressure advance value for each speed. The PA "
+#~ "ideal PA value should be decreasing the faster the speed is. If it is "
+#~ "not, confirm that your extruder is functioning correctly3. Enter the "
+#~ "pairs of PA values and Speeds in the text box here and save your filament "
+#~ "profile"
+#~ msgstr ""
+#~ "Dodaj pary wartości przyspieszenia ciśnienia i prędkości, przy których "
+#~ "zostały zmierzone, oddzielone przecinkiem. Jeden zestaw wartości na "
+#~ "wiersz. Na przykład\n"
+#~ "0.03,100\n"
+#~ "0.027,150 itd.\n"
+#~ "\n"
+#~ "Jak skalibrować:\n"
+#~ "1. Przeprowadź test PA dla co najmniej 3 prędkości na filament. Zaleca "
+#~ "się przeprowadzenie testu PA co najmniej dla zewnętrznych obwodów, "
+#~ "wewnętrznych obwodów i najszybszej prędkości drukowania cechy w profilu "
+#~ "(zwykle jest to rzadkie lub pełne wypełnienie).\n"
+#~ "2. Zanotuj optymalną wartość PA dla każdej prędkości. Idealna wartość PA "
+#~ "powinna maleć wraz ze wzrostem prędkości. Jeśli tak nie jest, sprawdź, "
+#~ "czy ekstruder działa prawidłowo. \n"
+#~ "3.Wprowadź pary wartości PA i prędkości w polu tekstowym i zapisz profil "
+#~ "filamentu."
+
+#~ msgid "Flow ratio and Pressure Advance"
+#~ msgstr "Współczynnik przepływu i Wzrost ciśnienia (PA)"
+
+#~ msgid "param_information"
+#~ msgstr "param_information"
 
 #~ msgid "Printer local connection failed, please try again."
 #~ msgstr ""
 #~ "Nie udało się nawiązać lokalnego połączenia z drukarką, spróbuj ponownie."
 
-#~ msgid ""
-#~ "Please find the details of Flow Dynamics Calibration from our wiki.\n"
-#~ "\n"
-#~ "Usually the calibration is unnecessary. When you start a single color/"
-#~ "material print, with the \"flow dynamics calibration\" option checked in "
-#~ "the print start menu, the printer will follow the old way, calibrate the "
-#~ "filament before the print; When you start a multi color/material print, "
-#~ "the printer will use the default compensation parameter for the filament "
-#~ "during every filament switch which will have a good result in most "
-#~ "cases.\n"
-#~ "\n"
-#~ "Please note there are a few cases that will make the calibration result "
-#~ "not reliable: using a texture plate to do the calibration; the build "
-#~ "plate does not have good adhesion (please wash the build plate or apply "
-#~ "gluestick!) ...You can find more from our wiki.\n"
-#~ "\n"
-#~ "The calibration results have about 10 percent jitter in our test, which "
-#~ "may cause the result not exactly the same in each calibration. We are "
-#~ "still investigating the root cause to do improvements with new updates."
-#~ msgstr ""
-#~ "Proszę znaleźć szczegóły dotyczące kalibracji dynamiki przepływu w naszej "
-#~ "wiki.\n"
-#~ "\n"
-#~ "Zazwyczaj kalibracja nie jest konieczna. Gdy rozpoczynasz druk w jednym "
-#~ "kolorze/materiale i zaznaczasz opcję \"kalibracja dynamiki przepływu\" w "
-#~ "menu rozpoczęcia druku - drukarka będzie postępować w tradycyjny sposób, "
-#~ "kalibrując filament przed rozpoczęciem druku. W przypadku druku w wielu "
-#~ "kolorach/materiałach drukarka będzie używać domyślnego parametru "
-#~ "kompensacji dla filamentu podczas każdej jego zmiany, co w większości "
-#~ "przypadków daje dobre rezultaty.\n"
-#~ "\n"
-#~ "Proszę jednak zauważyć, że istnieją pewne przypadki, w których wynik "
-#~ "kalibracji może być niesolidny: korzystanie z Texture PEI do kalibracji; "
-#~ "brak dobrej przyczepności podłoża (proszę umyć płytę lub nałożyć "
-#~ "klej!)... Więcej informacji można znaleźć w naszej wiki.\n"
-#~ "\n"
-#~ "Wyniki kalibracji mają około 10 procent fluktuacji w naszych testach, co "
-#~ "może powodować, że wynik nie będzie dokładnie taki sam w każdej "
-#~ "kalibracji. Wciąż badamy źródło tych fluktuacji i pracujemy nad "
-#~ "wprowadzeniem ulepszeń w nowych aktualizacjach."
-
-#~ msgid ""
-#~ "Only one of the results with the same name will be saved. Are you sure "
-#~ "you want to overrides the other results?"
-#~ msgstr ""
-#~ "Tylko jeden z wyników o tej samej nazwie zostanie zapisany. Czy na pewno "
-#~ "chcesz zastąpić inne wyniki?"
-
 #, c-format, boost-format
 #~ msgid ""
 #~ "There is already a historical calibration result with the same name: %s. "
@@ -16905,9 +16971,6 @@ msgstr ""
 #~ "jeden z wyników o tej samej nazwie zostanie zapisany. Czy na pewno chcesz "
 #~ "zastąpić ten wynik?"
 
-#~ msgid "Please find the cornor with perfect degree of extrusion"
-#~ msgstr "Znajdź róg z idealnym stopniem ekstruzji"
-
 #~ msgid "X"
 #~ msgstr "X"
 
@@ -17854,9 +17917,6 @@ msgstr ""
 #~ msgid "Balanced"
 #~ msgstr "Zrównoważone"
 
-#~ msgid "Quick"
-#~ msgstr "Szybkie"
-
 #~ msgid "Movement:"
 #~ msgstr "Ruch:"
 

localization/i18n/pt_BR/OrcaSlicer_pt_BR.po

@@ -2,7 +2,7 @@
 msgid ""
 msgstr ""
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-06-16 23:01+0800\n"
+"POT-Creation-Date: 2024-06-21 20:03+0800\n"
 "PO-Revision-Date: 2024-06-01 21:51-0300\n"
 "Last-Translator: \n"
 "Language-Team: Portuguese, Brazilian\n"
@@ -15139,6 +15139,9 @@ msgstr "ABS/ASA"
 msgid "PETG"
 msgstr "PETG"
 
+msgid "PCTG"
+msgstr ""
+
 msgid "TPU"
 msgstr "TPU"
 
@@ -15236,6 +15239,9 @@ msgstr ""
 msgid "Upload to storage"
 msgstr "Enviar para armazenamento"
 
+msgid "Switch to Device tab after upload."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr "O nome do arquivo enviado não termina com \"%s\". Deseja continuar?"
@@ -15928,6 +15934,12 @@ msgstr "Tem certeza de que deseja sair?"
 msgid "Refresh Printers"
 msgstr "Atualizar Impressoras"
 
+msgid "View print host webui in Device tab"
+msgstr ""
+
+msgid "Replace the BambuLab's device tab with print host webui"
+msgstr ""
+
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
 "signed certificate."
@@ -16370,21 +16382,17 @@ msgstr "Conectado ao SimplyPrint com sucesso!"
 msgid "Could not connect to SimplyPrint"
 msgstr "Não é possível conectar a SimplyPrint"
 
+msgid "Internal error"
+msgstr ""
+
+msgid "Unknown error"
+msgstr "Erro desconhecido"
+
 msgid "SimplyPrint account not linked. Go to Connect options to set it up."
 msgstr ""
 "Conta SimplyPrint não vinculada. Vá para as opções de conexão para configurá-"
 "la."
 
-msgid ""
-"File size exceeds the 100MB upload limit. Please upload your file through "
-"the panel."
-msgstr ""
-"O tamanho do arquivo excede o limite de envio de 100MB. Por favor, envie seu "
-"arquivo através do painel."
-
-msgid "Unknown error"
-msgstr "Erro desconhecido"
-
 msgid "Connection to Flashforge works correctly."
 msgstr "A conexão com a Flashforge está funcionando corretamente."
 
@@ -16792,6 +16800,13 @@ msgstr ""
 "aumentar adequadamente a temperatura da mesa aquecida pode reduzir a "
 "probabilidade de empenamento?"
 
+#~ msgid ""
+#~ "File size exceeds the 100MB upload limit. Please upload your file through "
+#~ "the panel."
+#~ msgstr ""
+#~ "O tamanho do arquivo excede o limite de envio de 100MB. Por favor, envie "
+#~ "seu arquivo através do painel."
+
 #~ msgid "Please input a valid value (K in 0~0.3)"
 #~ msgstr "Por favor, insira um valor válido (K entre 0~0.3)"
 

localization/i18n/sv/OrcaSlicer_sv.po

@@ -3,7 +3,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-06-16 23:01+0800\n"
+"POT-Creation-Date: 2024-06-21 20:03+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
@@ -14156,6 +14156,9 @@ msgstr "ABS/ASA"
 msgid "PETG"
 msgstr "PETG"
 
+msgid "PCTG"
+msgstr ""
+
 msgid "TPU"
 msgstr "TPU"
 
@@ -14240,6 +14243,9 @@ msgstr "Använd snedstreck ( / ) som katalog avgränsare om det behövs."
 msgid "Upload to storage"
 msgstr ""
 
+msgid "Switch to Device tab after upload."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr "Filnamnet slutar inte med \"%s\". Vill du fortsätta?"
@@ -14904,6 +14910,12 @@ msgstr ""
 msgid "Refresh Printers"
 msgstr "Uppdatera skrivare"
 
+msgid "View print host webui in Device tab"
+msgstr ""
+
+msgid "Replace the BambuLab's device tab with print host webui"
+msgstr ""
+
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
 "signed certificate."
@@ -15334,17 +15346,15 @@ msgstr ""
 msgid "Could not connect to SimplyPrint"
 msgstr ""
 
-msgid "SimplyPrint account not linked. Go to Connect options to set it up."
-msgstr ""
-
-msgid ""
-"File size exceeds the 100MB upload limit. Please upload your file through "
-"the panel."
+msgid "Internal error"
 msgstr ""
 
 msgid "Unknown error"
 msgstr ""
 
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
 msgid "Connection to Flashforge works correctly."
 msgstr ""
 

localization/i18n/uk/OrcaSlicer_uk.po

@@ -7,7 +7,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: \n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-06-16 23:01+0800\n"
+"POT-Creation-Date: 2024-06-21 20:03+0800\n"
 "PO-Revision-Date: 2024-05-30 12:35+0300\n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -15063,6 +15063,9 @@ msgstr "ABS/ASA"
 msgid "PETG"
 msgstr "PETG"
 
+msgid "PCTG"
+msgstr ""
+
 msgid "TPU"
 msgstr "TPU"
 
@@ -15160,6 +15163,9 @@ msgstr ""
 msgid "Upload to storage"
 msgstr "Завантажити до сховища"
 
+msgid "Switch to Device tab after upload."
+msgstr ""
+
 #, c-format, boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr ""
@@ -15861,6 +15867,12 @@ msgstr "Ви впевнені, що вийшли?"
 msgid "Refresh Printers"
 msgstr "Оновити принтери"
 
+msgid "View print host webui in Device tab"
+msgstr ""
+
+msgid "Replace the BambuLab's device tab with print host webui"
+msgstr ""
+
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
 "signed certificate."
@@ -16301,21 +16313,17 @@ msgstr "Успішне підключення до SimplyPrint!"
 msgid "Could not connect to SimplyPrint"
 msgstr "Не вдалося підключитися до SimplyPrint"
 
+msgid "Internal error"
+msgstr ""
+
+msgid "Unknown error"
+msgstr "Невідома помилка"
+
 msgid "SimplyPrint account not linked. Go to Connect options to set it up."
 msgstr ""
 "Обліковий запис SimplyPrint не пов’язано. Щоб налаштувати його, перейдіть до "
 "параметрів підключення."
 
-msgid ""
-"File size exceeds the 100MB upload limit. Please upload your file through "
-"the panel."
-msgstr ""
-"Розмір файлу перевищує ліміт завантаження в 100 Мб. Будь ласка, завантажте "
-"свій файл через панель."
-
-msgid "Unknown error"
-msgstr "Невідома помилка"
-
 msgid "Connection to Flashforge works correctly."
 msgstr "Підключення до Flashforge працює правильно."
 
@@ -16720,6 +16728,13 @@ msgstr ""
 "ABS, відповідне підвищення температури гарячого ліжка може зменшити "
 "ймовірність деформації."
 
+#~ msgid ""
+#~ "File size exceeds the 100MB upload limit. Please upload your file through "
+#~ "the panel."
+#~ msgstr ""
+#~ "Розмір файлу перевищує ліміт завантаження в 100 Мб. Будь ласка, "
+#~ "завантажте свій файл через панель."
+
 #~ msgid "Please input a valid value (K in 0~0.3)"
 #~ msgstr "Введіть допустиме значення (K в діапазоні 0~0.3)"
 

localization/i18n/zh_CN/OrcaSlicer_zh_CN.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-06-16 23:01+0800\n"
+"POT-Creation-Date: 2024-06-21 20:03+0800\n"
 "PO-Revision-Date: 2023-04-01 13:21+0800\n"
 "Last-Translator: SoftFever <softfeverever@gmail.com>\n"
 "Language-Team: \n"
@@ -10094,8 +10094,8 @@ msgid ""
 "external walls\n"
 "\n"
 msgstr ""
-"如果启用，此设置将确保外墙不会为了满足最小层时间而减速。这在以下情况下特别有帮"
-"助：\n"
+"如果启用，此设置将确保外墙不会为了满足最小层时间而减速。这在以下情况下特别有"
+"帮助：\n"
 "\n"
 "1. 避免在打印光滑耗材时改变光泽\n"
 "2. 避免改变外墙速度，可能会产生轻微的墙壁伪影，看起来像z条纹\n"
@@ -13882,6 +13882,9 @@ msgstr ""
 msgid "PETG"
 msgstr ""
 
+msgid "PCTG"
+msgstr ""
+
 msgid "TPU"
 msgstr ""
 
@@ -13978,6 +13981,9 @@ msgstr "如有需要，请使用正斜杠（ / ）作为目录分隔符。"
 msgid "Upload to storage"
 msgstr "上传到存储单位"
 
+msgid "Switch to Device tab after upload."
+msgstr "上传后跳转到设备页。"
+
 #, c-format, boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr "上传文件名不以\"%s\"结尾。您是否要继续？"
@@ -14605,6 +14611,12 @@ msgstr ""
 msgid "Refresh Printers"
 msgstr "刷新打印机"
 
+msgid "View print host webui in Device tab"
+msgstr ""
+
+msgid "Replace the BambuLab's device tab with print host webui"
+msgstr ""
+
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
 "signed certificate."
@@ -14990,17 +15002,15 @@ msgstr ""
 msgid "Could not connect to SimplyPrint"
 msgstr ""
 
-msgid "SimplyPrint account not linked. Go to Connect options to set it up."
-msgstr ""
-
-msgid ""
-"File size exceeds the 100MB upload limit. Please upload your file through "
-"the panel."
+msgid "Internal error"
 msgstr ""
 
 msgid "Unknown error"
 msgstr ""
 
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
 msgid "Connection to Flashforge works correctly."
 msgstr ""
 

localization/i18n/zh_TW/OrcaSlicer_zh_TW.po

@@ -6,7 +6,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Orca Slicer\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2024-06-16 23:01+0800\n"
+"POT-Creation-Date: 2024-06-21 20:03+0800\n"
 "PO-Revision-Date: 2023-11-06 14:37+0800\n"
 "Last-Translator: ablegods <ablegods@gmail.com>\n"
 "Language-Team: \n"
@@ -14267,6 +14267,9 @@ msgstr ""
 msgid "PETG"
 msgstr ""
 
+msgid "PCTG"
+msgstr ""
+
 msgid "TPU"
 msgstr ""
 
@@ -14367,6 +14370,9 @@ msgstr "如有需要，請使用正斜槓（ / ）作為目錄分隔符號。"
 msgid "Upload to storage"
 msgstr "上傳到儲存單位"
 
+msgid "Switch to Device tab after upload."
+msgstr ""
+
 #, fuzzy, c-format, boost-format
 msgid "Upload filename doesn't end with \"%s\". Do you wish to continue?"
 msgstr "上傳的檔名不以 \"%s\" 結尾。確定要繼續嗎？"
@@ -14975,6 +14981,12 @@ msgstr ""
 msgid "Refresh Printers"
 msgstr "重新整理列印設備"
 
+msgid "View print host webui in Device tab"
+msgstr ""
+
+msgid "Replace the BambuLab's device tab with print host webui"
+msgstr ""
+
 #, fuzzy
 msgid ""
 "HTTPS CA file is optional. It is only needed if you use HTTPS with a self-"
@@ -15317,17 +15329,15 @@ msgstr ""
 msgid "Could not connect to SimplyPrint"
 msgstr ""
 
-msgid "SimplyPrint account not linked. Go to Connect options to set it up."
-msgstr ""
-
-msgid ""
-"File size exceeds the 100MB upload limit. Please upload your file through "
-"the panel."
+msgid "Internal error"
 msgstr ""
 
 msgid "Unknown error"
 msgstr ""
 
+msgid "SimplyPrint account not linked. Go to Connect options to set it up."
+msgstr ""
+
 msgid "Connection to Flashforge works correctly."
 msgstr ""
 

resources/profiles/Anker.json

@@ -1,6 +1,6 @@
 {
     "name": "Anker",
-    "version": "02.01.00.01",
+    "version": "02.01.01.00",
     "force_update": "0",
     "description": "Anker configurations",
     "machine_model_list": [

resources/profiles/Anycubic.json

@@ -1,6 +1,6 @@
 {
     "name": "Anycubic",
-    "version": "02.01.00.01",
+    "version": "02.01.01.00",
     "force_update": "0",
     "description": "Anycubic configurations",
     "machine_model_list": [

resources/profiles/Artillery.json

@@ -1,6 +1,6 @@
 {
     "name": "Artillery",
-    "version": "02.01.00.01",
+    "version": "02.01.01.00",
     "force_update": "0",
     "description": "Artillery configurations",
     "machine_model_list": [

resources/profiles/BBL.json

@@ -1,7 +1,7 @@
 {
     "name": "Bambulab",
     "url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-    "version": "01.09.00.12",
+    "version": "01.09.00.14",
     "force_update": "0",
     "description": "the initial version of BBL configurations",
     "machine_model_list": [
@@ -625,6 +625,10 @@
             "name": "fdm_filament_pc",
             "sub_path": "filament/fdm_filament_pc.json"
         },
+        {
+            "name": "fdm_filament_pctg",
+            "sub_path": "filament/fdm_filament_pctg.json"
+        },
         {
             "name": "fdm_filament_asa",
             "sub_path": "filament/fdm_filament_asa.json"

resources/profiles/BBL/filament/Generic PCTG @base.json

@@ -1,7 +1,7 @@
 {
     "type": "filament",
     "name": "Generic PCTG @base",
-    "inherits": "fdm_filament_pet",
+    "inherits": "fdm_filament_pctg",
     "from": "system",
     "filament_id": "GFG97",
     "instantiation": "false",

resources/profiles/BBL/filament/fdm_filament_pctg.json

@@ -0,0 +1,64 @@
+{
+  "type": "filament",
+  "name": "fdm_filament_pctg",
+  "inherits": "fdm_filament_common",
+  "from": "system",
+  "instantiation": "false",
+  "eng_plate_temp": [
+      "0"
+  ],
+  "eng_plate_temp_initial_layer": [
+      "0"
+  ],
+  "fan_cooling_layer_time": [
+      "20"
+  ],
+  "fan_min_speed": [
+      "20"
+  ],
+  "filament_cost": [
+      "30"
+  ],
+  "filament_density": [
+      "1.27"
+  ],
+  "filament_max_volumetric_speed": [
+      "25"
+  ],
+  "filament_type": [
+      "PCTG"
+  ],
+  "hot_plate_temp": [
+      "80"
+  ],
+  "hot_plate_temp_initial_layer": [
+      "80"
+  ],
+  "nozzle_temperature": [
+      "255"
+  ],
+  "nozzle_temperature_initial_layer": [
+      "255"
+  ],
+  "nozzle_temperature_range_high": [
+      "260"
+  ],
+  "nozzle_temperature_range_low": [
+      "220"
+  ],
+  "reduce_fan_stop_start_freq": [
+      "1"
+  ],
+  "temperature_vitrification": [
+      "70"
+  ],
+  "textured_plate_temp": [
+      "80"
+  ],
+  "textured_plate_temp_initial_layer": [
+      "80"
+  ],
+  "filament_start_gcode": [
+      "; filament start gcode\n{if (bed_temperature[current_extruder] >45)||(bed_temperature_initial_layer[current_extruder] >45)}M106 P3 S180\n{elsif (bed_temperature[current_extruder] >50)||(bed_temperature_initial_layer[current_extruder] >50)}M106 P3 S255\n{endif};Prevent PLA from jamming\n\n{if activate_air_filtration[current_extruder] && support_air_filtration}\nM106 P3 S{during_print_exhaust_fan_speed_num[current_extruder]} \n{endif}"
+  ]
+}

resources/profiles/BIQU.json

@@ -1,6 +1,6 @@
 {
     "name": "BIQU",
-    "version": "02.01.00.01",
+    "version": "02.01.01.00",
     "force_update": "0",
     "description": "BIQU configurations",
     "machine_model_list": [

resources/profiles/CONSTRUCT3D.json

@@ -1,6 +1,6 @@
 {
     "name": "CONSTRUCT3D",
-    "version": "02.01.00.01",
+    "version": "02.01.01.00",
     "force_update": "0",
     "description": "Construct3D configurations",
     "machine_model_list": [

resources/profiles/Comgrow.json

@@ -1,6 +1,6 @@
 {
 	"name": "Comgrow",
-	"version": "02.01.00.01",
+	"version": "02.01.01.00",
 	"force_update": "0",
 	"description": "Comgrow configurations",
 	"machine_model_list": [

resources/profiles/Creality.json

@@ -1,6 +1,6 @@
 {
     "name": "Creality",
-    "version": "02.01.00.01",
+    "version": "02.01.01.00",
     "force_update": "0",
     "description": "Creality configurations",
     "machine_model_list": [

resources/profiles/Creality/machine/Creality Ender-3 V3 0.4 nozzle.json

@@ -33,8 +33,8 @@
         "20000"
     ],
     "machine_max_acceleration_retracting": [
-        "5000",
-        "5000"
+        "6000",
+        "6000"
     ],
     "machine_max_acceleration_travel": [
         "20000",
@@ -45,57 +45,57 @@
         "20000"
     ],
     "machine_max_acceleration_y": [
-        "20000",
-        "20000"
+        "5000",
+        "5000"
     ],
     "machine_max_acceleration_z": [
-        "500",
-        "500"
+        "20000",
+        "20000"
     ],
     "machine_max_speed_e": [
         "100",
         "100"
     ],
     "machine_max_speed_x": [
-        "800",
-        "800"
+        "600",
+        "600"
     ],
     "machine_max_speed_y": [
-        "800",
-        "800"
+        "600",
+        "600"
     ],
     "machine_max_speed_z": [
-        "30",
-        "30"
+        "500",
+        "500"
     ],
     "machine_max_jerk_e": [
-        "2.5",
-        "2.5"
+        "10",
+        "10"
     ],
     "machine_max_jerk_x": [
-        "12",
-        "12"
+        "20",
+        "20"
     ],
     "machine_max_jerk_y": [
-        "12",
-        "12"
+        "10",
+        "10"
     ],
     "machine_max_jerk_z": [
-        "2",
-        "2"
+        "20",
+        "20"
     ],
     "max_layer_height": [
-        "0.3"
+        "0.35"
     ],
     "min_layer_height": [
-        "0.08"
+        "0.1"
     ],
     "printer_settings_id": "Creality",
     "retraction_minimum_travel": [
-        "2"
+        "1"
     ],
     "retract_before_wipe": [
-        "0%"
+        "70%"
     ],
     "retraction_length": [
         "0.6"
@@ -109,11 +109,14 @@
     "deretraction_speed": [
         "40"
     ],
-    "extruder_clearance_height_to_lid": "101",
-    "extruder_clearance_height_to_rod": "45",
-    "extruder_clearance_radius": "45",
+    "extruder_clearance_height_to_lid": "250",
+    "extruder_clearance_height_to_rod": "14",
+    "extruder_clearance_radius": "70",
     "z_hop": [
-        "0.12"
+        "0.2"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
     ],
     "wipe_distance": [
         "2"
@@ -129,6 +132,6 @@
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
     "thumbnails": [
-        "320x320"
+        "96x96/PNG, 300x300/PNG"
     ]
 }

resources/profiles/Creality/machine/Creality Ender-3 V3 0.6 nozzle.json

@@ -33,8 +33,8 @@
         "20000"
     ],
     "machine_max_acceleration_retracting": [
-        "5000",
-        "5000"
+        "6000",
+        "6000"
     ],
     "machine_max_acceleration_travel": [
         "20000",
@@ -45,57 +45,57 @@
         "20000"
     ],
     "machine_max_acceleration_y": [
-        "20000",
-        "20000"
+        "5000",
+        "5000"
     ],
     "machine_max_acceleration_z": [
-        "500",
-        "500"
+        "20000",
+        "20000"
     ],
     "machine_max_speed_e": [
         "100",
         "100"
     ],
     "machine_max_speed_x": [
-        "800",
-        "800"
+        "600",
+        "600"
     ],
     "machine_max_speed_y": [
-        "800",
-        "800"
+        "600",
+        "600"
     ],
     "machine_max_speed_z": [
-        "30",
-        "30"
+        "500",
+        "500"
     ],
     "machine_max_jerk_e": [
-        "2.5",
-        "2.5"
+        "10",
+        "10"
     ],
     "machine_max_jerk_x": [
-        "12",
-        "12"
+        "20",
+        "20"
     ],
     "machine_max_jerk_y": [
-        "12",
-        "12"
+        "10",
+        "10"
     ],
     "machine_max_jerk_z": [
-        "2",
-        "2"
+        "20",
+        "20"
     ],
     "max_layer_height": [
-        "0.3"
+        "0.35"
     ],
     "min_layer_height": [
-        "0.08"
+        "0.1"
     ],
     "printer_settings_id": "Creality",
     "retraction_minimum_travel": [
-        "2"
+        "1"
     ],
     "retract_before_wipe": [
-        "0%"
+        "70%"
     ],
     "retraction_length": [
         "0.6"
@@ -109,11 +109,14 @@
     "deretraction_speed": [
         "40"
     ],
-    "extruder_clearance_height_to_lid": "101",
-    "extruder_clearance_height_to_rod": "45",
-    "extruder_clearance_radius": "45",
+    "extruder_clearance_height_to_lid": "250",
+    "extruder_clearance_height_to_rod": "14",
+    "extruder_clearance_radius": "70",
     "z_hop": [
-        "0.12"
+        "0.2"
+    ],
+    "z_hop_types": [
+        "Auto Lift"
     ],
     "wipe_distance": [
         "2"
@@ -129,6 +132,6 @@
     "machine_end_gcode": "END_PRINT",
     "scan_first_layer": "0",
     "thumbnails": [
-        "320x320"
+        "96x96/PNG, 300x300/PNG"
     ]
 }

resources/profiles/Creality/machine/Creality Ender-3 V3 KE 0.4 nozzle.json

@@ -114,7 +114,7 @@
 	],
 	"single_extruder_multi_material": "1",
 	"manual_filament_change": "1",
-	"change_filament_gcode": "PAUSE",
+	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Creality Generic PLA @Ender-3V3-all"

resources/profiles/Creality/process/0.12mm Fine @Creality Ender3V3KE.json

@@ -12,7 +12,7 @@
 	"bottom_surface_pattern": "monotonic",
 	"bottom_shell_layers": "5",
 	"bottom_shell_thickness": "0",
-	"bridge_flow": "0.95",
+	"bridge_flow": "1",
 	"bridge_speed": "65",
     "brim_type": "no_brim",
 	"brim_width": "5",
@@ -23,17 +23,17 @@
 	"top_surface_acceleration": "5000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0",
+	"elefant_foot_compensation": "0.05",
 	"outer_wall_line_width": "0.42",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.45",
+	"line_width": "0.42",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
-	"outer_wall_acceleration": "5000",
+	"outer_wall_acceleration": "4000",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "1",
@@ -60,7 +60,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.45",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -104,7 +104,7 @@
 	"role_based_wipe_speed" : "0",
 	"wipe_speed": "200",
 	"prime_tower_width": "60",
-	"xy_hole_compensation": "0",
+	"xy_hole_compensation": "0.025",
 	"xy_contour_compensation": "0",
 	"default_jerk": "7",
 	"outer_wall_jerk": "7",

resources/profiles/Creality/process/0.16mm Optimal @Creality Ender3V3KE.json

@@ -12,7 +12,7 @@
 	"bottom_surface_pattern": "monotonic",
 	"bottom_shell_layers": "4",
 	"bottom_shell_thickness": "0",
-	"bridge_flow": "0.95",
+	"bridge_flow": "1",
 	"bridge_speed": "65",
     "brim_type": "no_brim",
 	"brim_width": "5",
@@ -23,17 +23,17 @@
 	"top_surface_acceleration": "5000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0",
+	"elefant_foot_compensation": "0.05",
 	"outer_wall_line_width": "0.42",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.45",
+	"line_width": "0.42",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
-	"outer_wall_acceleration": "5000",
+	"outer_wall_acceleration": "4000",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "1",
@@ -60,7 +60,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.45",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -104,7 +104,7 @@
 	"role_based_wipe_speed" : "0",
 	"wipe_speed": "200",
 	"prime_tower_width": "60",
-	"xy_hole_compensation": "0",
+	"xy_hole_compensation": "0.025",
 	"xy_contour_compensation": "0",
 	"default_jerk": "7",
 	"outer_wall_jerk": "7",

resources/profiles/Creality/process/0.20mm Standard @Creality Ender3V3KE.json

@@ -13,7 +13,7 @@
 	"bottom_surface_pattern": "monotonic",
 	"bottom_shell_layers": "4",
 	"bottom_shell_thickness": "0",
-	"bridge_flow": "0.95",
+	"bridge_flow": "1",
 	"bridge_speed": "65",
     "brim_type": "no_brim",
 	"brim_width": "5",
@@ -24,17 +24,17 @@
 	"top_surface_acceleration": "5000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0",
+	"elefant_foot_compensation": "0.05",
 	"outer_wall_line_width": "0.42",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.45",
+	"line_width": "0.42",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
-	"outer_wall_acceleration": "5000",
+	"outer_wall_acceleration": "4000",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
@@ -61,7 +61,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.45",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -105,7 +105,7 @@
 	"role_based_wipe_speed": "0",
 	"wipe_speed": "200",
 	"prime_tower_width": "60",
-	"xy_hole_compensation": "0",
+	"xy_hole_compensation": "0.025",
 	"xy_contour_compensation": "0",
 	"default_jerk": "7",
 	"outer_wall_jerk": "7",

resources/profiles/Creality/process/0.24mm Draft @Creality Ender3V3KE.json

@@ -12,7 +12,7 @@
 	"bottom_surface_pattern": "monotonic",
 	"bottom_shell_layers": "4",
 	"bottom_shell_thickness": "0",
-	"bridge_flow": "0.95",
+	"bridge_flow": "1",
 	"bridge_speed": "65",
     "brim_type": "no_brim",
 	"brim_width": "5",
@@ -23,17 +23,17 @@
 	"top_surface_acceleration": "5000",
 	"bridge_no_support": "0",
 	"draft_shield": "disabled",
-	"elefant_foot_compensation": "0",
+	"elefant_foot_compensation": "0.05",
 	"outer_wall_line_width": "0.42",
 	"wall_infill_order": "inner wall/outer wall/infill",
-	"line_width": "0.45",
+	"line_width": "0.42",
 	"infill_direction": "45",
 	"sparse_infill_density": "15%",
 	"sparse_infill_pattern": "crosshatch",
 	"initial_layer_acceleration": "1000",
 	"travel_acceleration": "5000",
 	"inner_wall_acceleration": "5000",
-	"outer_wall_acceleration": "5000",
+	"outer_wall_acceleration": "4000",
 	"initial_layer_line_width": "0.5",
 	"initial_layer_print_height": "0.2",
 	"infill_combination": "0",
@@ -60,7 +60,7 @@
 	"skirt_height": "2",
 	"skirt_loops": "0",
 	"minimum_sparse_infill_area": "10",
-	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_line_width": "0.45",
 	"spiral_mode": "0",
 	"standby_temperature_delta": "-5",
 	"enable_support": "0",
@@ -104,7 +104,7 @@
 	"role_based_wipe_speed" : "0",
 	"wipe_speed": "200",
 	"prime_tower_width": "60",
-	"xy_hole_compensation": "0",
+	"xy_hole_compensation": "0.025",
 	"xy_contour_compensation": "0",
 	"default_jerk": "7",
 	"outer_wall_jerk": "7",

resources/profiles/Creality/process/0.24mm Optimal @Creality K1C 0.6 nozzle.json

@@ -112,6 +112,6 @@
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
     "compatible_printers": [
-        "Creality K1C (0.6 nozzle)"
+        "Creality K1C 0.6 nozzle"
     ]
 }

resources/profiles/Creality/process/0.30mm Standard @Creality K1C 0.6 nozzle.json

@@ -112,6 +112,6 @@
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
     "compatible_printers": [
-        "Creality K1C (0.6 nozzle)"
+        "Creality K1C 0.6 nozzle"
     ]
 }

resources/profiles/Creality/process/0.32mm Optimal @Creality K1C 0.8 nozzle.json

@@ -112,6 +112,6 @@
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
     "compatible_printers": [
-        "Creality K1C (0.8 nozzle)"
+        "Creality K1C 0.8 nozzle"
     ]
 }

resources/profiles/Creality/process/0.36mm Draft @Creality K1C 0.6 nozzle.json

@@ -112,6 +112,6 @@
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
     "compatible_printers": [
-        "Creality K1C (0.6 nozzle)"
+        "Creality K1C 0.6 nozzle"
     ]
 }

resources/profiles/Creality/process/0.40mm Standard @Creality K1C 0.8 nozzle.json

@@ -112,6 +112,6 @@
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
     "compatible_printers": [
-        "Creality K1C (0.8 nozzle)"
+        "Creality K1C 0.8 nozzle"
     ]
 }

resources/profiles/Creality/process/0.48mm Draft @Creality K1C 0.8 nozzle.json

@@ -1,7 +1,7 @@
 {
     "type": "process",
     "setting_id": "GP004",
-    "name": "0.48mm Draft @Creality K1C (0.8 nozzle)",
+    "name": "0.48mm Draft @Creality K1C",
     "from": "system",
     "inherits": "fdm_process_common_klipper",
     "instantiation": "true",
@@ -112,6 +112,6 @@
     "xy_contour_compensation": "0",
     "gcode_label_objects": "0",
     "compatible_printers": [
-        "Creality K1C (0.8 nozzle)"
+        "Creality K1C 0.8 nozzle"
     ]
 }

resources/profiles/Custom.json

@@ -1,6 +1,6 @@
 {
     "name": "Custom Printer",
-    "version": "02.01.00.01",
+    "version": "02.01.01.00",
     "force_update": "0",
     "description": "My configurations",
     "machine_model_list": [

resources/profiles/Dremel.json

@@ -1,6 +1,6 @@
 {
 	"name": "Dremel",
-	"version": "02.01.00.01",
+	"version": "02.01.01.00",
 	"force_update": "0",
 	"description": "Dremel configurations",
 	"machine_model_list": [

resources/profiles/Dremel/machine/Dremel 3D20 0.4 nozzle.json

@@ -7,7 +7,7 @@
   "inherits": "fdm_dremel_common",
   "printer_model": "Dremel 3D20",
   "printer_variant": "0.4",
-  "printer_structure": "Hbot",
+  "printer_structure": "hbot",
   "gcode_flavor": "marlin",
   "default_filament_profile": [
     "Dremel Generic PLA @3D20 all"
@@ -52,7 +52,7 @@
       "0"
   ],
   "retract_lift_enforce": [
-      "Top Surfaces"
+      "Top Only"
   ],
   "retract_restart_extra": [
       "0"

resources/profiles/Dremel/machine/Dremel 3D40 0.4 nozzle.json

@@ -7,7 +7,7 @@
     "inherits": "fdm_dremel_common",
     "printer_model": "Dremel 3D40",
     "printer_variant": "0.4",
-    "printer_structure": "Hbot",
+    "printer_structure": "hbot",
     "gcode_flavor": "marlin",
     "default_filament_profile": [
       "Dremel Generic PLA @3D40 all"
@@ -61,7 +61,7 @@
         "1"
     ],
     "retract_lift_enforce": [
-        "Top Surfaces"
+        "Top Only"
     ],
     "wipe": [
         "1"

resources/profiles/Elegoo.json

@@ -1,6 +1,6 @@
 {
 	"name": "Elegoo",
-	"version": "02.01.00.01",
+	"version": "02.01.01.00",
 	"force_update": "0",
 	"description": "Elegoo configurations",
 	"machine_model_list": [

resources/profiles/FLSun.json

@@ -1,6 +1,6 @@
 {
     "name": "FLSun",
-    "version": "02.01.00.01",
+    "version": "02.01.01.00",
     "force_update": "0",
     "description": "FLSun configurations",
     "machine_model_list": [

resources/profiles/Flashforge.json

@@ -1,7 +1,7 @@
 {
   "name": "Flashforge",
   "url": "",
-  "version": "02.01.00.01",
+  "version": "02.01.01.00",
   "force_update": "0",
   "description": "Flashforge configurations",
   "machine_model_list": [

resources/profiles/Flashforge/machine/Flashforge Guider 2s 0.4 nozzle.json

@@ -56,5 +56,5 @@
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"wipe_distance": "2",
-	"nozzle_type": "undefined"
+	"nozzle_type": "undefine"
 }

resources/profiles/Flashforge/process/0.12mm Detail @Flashforge Guider 2s 0.4 nozzle.json

@@ -100,7 +100,7 @@
     "top_shell_thickness": "0.8",
     "wall_loops": "3",
     "wall_infill_order": "inner wall/outer wall/infill",
-    "wall_generator": "archane",
+    "wall_generator": "arachne",
     "compatible_printers": [
         "Flashforge Guider 2s 0.4 nozzle"
     ]

resources/profiles/Flashforge/process/0.16mm Optimal @Flashforge Guider 2s 0.4 nozzle.json

@@ -100,7 +100,7 @@
     "top_shell_thickness": "0.8",
     "wall_loops": "2",
     "wall_infill_order": "inner wall/outer wall/infill",
-    "wall_generator": "archane",
+    "wall_generator": "arachne",
     "compatible_printers": [
         "Flashforge Guider 2s 0.4 nozzle"
     ]

resources/profiles/Flashforge/process/0.20mm Standard @Flashforge Guider 2s 0.4 nozzle.json

@@ -101,7 +101,7 @@
     "top_shell_thickness": "0.8",
     "wall_loops": "2",
     "wall_infill_order": "inner wall/outer wall/infill",
-    "wall_generator": "archane",
+    "wall_generator": "arachne",
     "compatible_printers": [
         "Flashforge Guider 2s 0.4 nozzle"
     ]

resources/profiles/Flashforge/process/0.30mm Draft @Flashforge Guider 2s 0.4 nozzle.json

@@ -101,7 +101,7 @@
     "top_shell_thickness": "0.8",
     "wall_loops": "2",
     "wall_infill_order": "inner wall/outer wall/infill",
-    "wall_generator": "archane",
+    "wall_generator": "arachne",
     "compatible_printers": [
         "Flashforge Guider 2s 0.4 nozzle"
     ]

resources/profiles/FlyingBear.json

@@ -1,6 +1,6 @@
 {
     "name": "FlyingBear",
-    "version": "02.01.00.01",
+    "version": "02.01.01.00",
     "force_update": "1",
     "description": "FlyingBear configurations",
     "machine_model_list": [
@@ -11,14 +11,25 @@
         {
             "name": "FlyingBear S1",
             "sub_path": "machine/S1/FlyingBear S1.json"
+        },
+        {
+            "name": "FlyingBear Ghost 6",
+            "sub_path": "machine/FlyingBear Ghost 6.json"
         }
-
     ],
     "process_list": [
         {
             "name": "fdm_process_common",
             "sub_path": "process/fdm_process_common.json"
         },
+        {
+            "name": "fdm_process_marlin_common",
+            "sub_path": "process/fdm_process_marlin_common.json"
+        },
+        {
+            "name": "fdm_process_ghost_6",
+            "sub_path": "process/fdm_process_ghost_6.json"
+        },
         {
             "name": "0.08mm Extra Fine @FlyingBear Reborn3",
             "sub_path": "process/0.08mm Extra Fine @FlyingBear Reborn3.json"
@@ -40,8 +51,23 @@
             "sub_path": "process/0.24mm Draft @FlyingBear Reborn3.json"
         },
 
+        {
+            "name": "0.12mm Fine @FlyingBear Ghost 6 0.4 nozzle",
+            "sub_path": "process/0.12mm Fine @FlyingBear Ghost 6 0.4 nozzle.json"
+        },
+        {
+            "name": "0.16mm Optimal @FlyingBear Ghost 6 0.4 nozzle",
+            "sub_path": "process/0.16mm Optimal @FlyingBear Ghost 6 0.4 nozzle.json"
+        },
+        {
+            "name": "0.20mm Standard @FlyingBear Ghost 6 0.4 nozzle",
+            "sub_path": "process/0.20mm Standard @FlyingBear Ghost 6 0.4 nozzle.json"
+        },
+        {
+            "name": "0.24mm Draft @FlyingBear Ghost 6 0.4 nozzle",
+            "sub_path": "process/0.24mm Draft @FlyingBear Ghost 6 0.4 nozzle.json"
+        },
 
-        
         {
             "name": "fdm_process_common_S1",
             "sub_path": "process/S1/fdm_process_common_S1.json"
@@ -254,6 +280,10 @@
 
     ],
     "machine_list": [
+	    {
+            "name": "fdm_marlin_common",
+            "sub_path": "machine/fdm_marlin_common.json"
+        },
 	    {
             "name": "fdm_machine_common",
             "sub_path": "machine/fdm_machine_common.json"
@@ -266,13 +296,13 @@
             "name": "FlyingBear Reborn3 0.4 nozzle",
             "sub_path": "machine/FlyingBear Reborn3 0.4 nozzle.json"
         },
-
-
         {
             "name": "FlyingBear S1 0.4 nozzle",
             "sub_path": "machine/S1/FlyingBear S1 0.4 nozzle.json"
+        },
+        {
+            "name": "FlyingBear Ghost 6 0.4",
+            "sub_path": "machine/FlyingBear Ghost 6 0.4 nozzle.json"
         }
-
-
     ]
 }

resources/profiles/FlyingBear/filament/FlyingBear Generic ABS.json

@@ -22,6 +22,7 @@
         "0.8"
     ],
     "compatible_printers": [
-      "FlyingBear Reborn3 0.4 nozzle"
+      "FlyingBear Reborn3 0.4 nozzle",
+      "FlyingBear Ghost 6 0.4 nozzle"
     ]
 }

resources/profiles/FlyingBear/filament/FlyingBear Generic PA-CF.json

@@ -28,7 +28,7 @@
         "0.8"
     ],
     "compatible_printers": [
-      "FlyingBear Reborn3 0.4 nozzle"
-
+      "FlyingBear Reborn3 0.4 nozzle",
+      "FlyingBear Ghost 6 0.4 nozzle"
     ]
   }

resources/profiles/FlyingBear/filament/FlyingBear Generic PC.json

@@ -19,6 +19,7 @@
         "0.058"
     ],
     "compatible_printers": [
-      "FlyingBear Reborn3 0.4 nozzle"
+      "FlyingBear Reborn3 0.4 nozzle",
+      "FlyingBear Ghost 6 0.4 nozzle"
     ]
  }

resources/profiles/FlyingBear/filament/FlyingBear Generic PETG.json

@@ -49,6 +49,7 @@
         "0.084"
       ],
     "compatible_printers": [
-      "FlyingBear Reborn3 0.4 nozzle"
+      "FlyingBear Reborn3 0.4 nozzle",
+      "FlyingBear Ghost 6 0.4 nozzle"
     ]
 }

resources/profiles/FlyingBear/filament/FlyingBear Generic PLA.json

@@ -19,6 +19,7 @@
         "0.084"
     ],
     "compatible_printers": [
-      "FlyingBear Reborn3 0.4 nozzle"
+      "FlyingBear Reborn3 0.4 nozzle",
+      "FlyingBear Ghost 6 0.4 nozzle"
     ]
 }

resources/profiles/FlyingBear/filament/FlyingBear Generic TPU.json

@@ -19,6 +19,7 @@
      "0.13"
     ],
     "compatible_printers": [
-      "FlyingBear Reborn3 0.4 nozzle"
+      "FlyingBear Reborn3 0.4 nozzle",
+      "FlyingBear Ghost 6 0.4 nozzle"
     ]
 }

resources/profiles/FlyingBear/filament/FlyingBear PLA Hyper.json

@@ -22,6 +22,7 @@
         "0.02"
     ],
     "compatible_printers": [
-      "FlyingBear Reborn3 0.4 nozzle"
+      "FlyingBear Reborn3 0.4 nozzle",
+      "FlyingBear Ghost 6 0.4 nozzle"
     ]
 }

resources/profiles/FlyingBear/machine/FlyingBear Ghost 6 0.4 nozzle.json

@@ -0,0 +1,134 @@
+{
+    "type": "machine",
+    "setting_id": "GM001",
+    "name": "FlyingBear Ghost 6 0.4 nozzle",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_marlin_common",
+    "printer_model": "FlyingBear Ghost 6",
+    "gcode_flavor": "marlin2",
+    "default_print_profile": "0.20mm Standard @FlyingBear Ghost 6",
+    "nozzle_diameter": [
+        "0.4"
+    ],
+    "printer_variant": "0.4",
+    "printable_area": [
+        "0x0",
+        "255x0",
+        "255x210",
+        "0x210"
+    ],
+    "printable_height": "210",
+    "nozzle_type": "brass",
+    "auxiliary_fan": "1",
+    "support_air_filtration": "1",
+    "support_multi_bed_types": "1",
+    "machine_max_acceleration_extruding": [
+        "1500",
+        "1500"
+    ],
+    "machine_max_acceleration_retracting": [
+        "3000",
+        "3000"
+    ],
+    "machine_max_acceleration_travel": [
+        "2000",
+        "2000"
+    ],
+    "machine_max_acceleration_x": [
+        "1500",
+        "1500"
+    ],
+    "machine_max_acceleration_y": [
+        "1500",
+        "1500"
+    ],
+    "machine_max_acceleration_z": [
+        "100",
+        "100"
+    ],
+    "machine_max_acceleration_e": [
+        "2000",
+        "2000"
+    ],
+    "machine_max_speed_x": [
+        "200",
+        "200"
+    ],
+    "machine_max_speed_y": [
+        "200",
+        "200"
+    ],
+    "machine_max_speed_z": [
+        "4",
+        "4"
+    ],
+    "machine_max_speed_e": [
+        "45",
+        "45"
+    ],
+    "machine_max_jerk_x": [
+        "15",
+        "15"
+    ],
+    "machine_max_jerk_y": [
+        "15",
+        "15"
+    ],
+    "machine_max_jerk_z": [
+        "0.4",
+        "0.4"
+    ],
+    "machine_max_jerk_e": [
+        "2.0",
+        "2.0"
+    ],
+    "max_layer_height": [
+        "0.3"
+    ],
+    "min_layer_height": [
+        "0.05"
+    ],
+    "printer_settings_id": "",
+    "retraction_minimum_travel": [
+        "3"
+    ],
+    "retract_before_wipe": [
+        "0%"
+    ],
+    "retraction_length": [
+        "0.8"
+    ],
+    "retract_length_toolchange": [
+        "1"
+    ],
+    "retraction_speed": [
+        "35"
+    ],
+    "deretraction_speed": [
+        "35"
+    ],
+    "extruder_clearance_height_to_lid": "80",
+    "extruder_clearance_height_to_rod": "64",
+    "extruder_clearance_radius": "40",
+    "z_hop": [
+        "0.2"
+    ],
+    "wipe_distance": [
+        "2"
+    ],
+    "single_extruder_multi_material": "1",
+    "manual_filament_change": "1",
+    "change_filament_gcode": "M600",
+    "machine_pause_gcode": "M25",
+    "default_filament_profile": [
+       "FlyingBear Generic PLA"
+    ],
+    "machine_start_gcode": "M220 S100 ;reset feedrate\nM221 S100 ;reset flowrate\nG21 ;set units to millimeters\nG90 ;use absolute coordinates\nM82 ;absolute extrusion mode\nM107 ;turn off colling fan\n\nM140 S[bed_temperature_initial_layer] ;set bed temperature continue without waiting\nM104 S[nozzle_temperature_initial_layer] ;set hotend temperature continue without waiting\n\nG28 ;home\nG1 Z2 F1500 ;raise z\nG92 E0 ;reset extruder\n\nM190 S[bed_temperature_initial_layer] ;wait for bed temperature\nM109 S[nozzle_temperature_initial_layer] ;wait for hotend temperature\n\nG1 X20 Y20 F5000 ;start position \nG1 Z0.28 F1500 ;lower z\nG1 E4 F500 ;prime the filament\n\nG1 X20 Y20.0 Z0.28 F3000.0  ;start position \nG1 X20 Y170.0 Z0.28 F1500.0 E12 ;1st line\nG1 X20.3 F1500\nG1 X20.3 Y20.0 Z0.28 F1500.0 E18 ;2nd line\n\nG92 E0 ;reset extruder\nG1 Z2 F1500 ;raise z\nG92 E0 ;reset extruder\n",
+    "machine_end_gcode": "G91 ;use relative coordinates\nG1 E-4 F1500 ;retract the filament\nG1 X5 Y5 Z0.2 F5000 ;wipe\nG1 Z5 F1500 ;raise z\nG90 ;use absolute coordinates\nG1 X10 Y210 F5000 ;park print head\n\nM107 ;turn off fan\nM104 S0 ;turn off hotend\nM140 S0 ;turn off heatbed\nM84 ;disable motors",
+    "scan_first_layer": "0",
+    "thumbnails": [
+        "100x100",
+        "320x320"
+    ]
+}

resources/profiles/FlyingBear/machine/FlyingBear Ghost 6.json

@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "name": "FlyingBear Ghost 6",
+    "model_id": "FlyingBear Ghost 6",
+    "nozzle_diameter": "0.4",
+    "machine_tech": "FFF",
+    "family": "FlyingBearDesign",
+    "bed_model": "FlyingBear Ghost 6-bed.stl",
+    "bed_texture": "FlyingBear Ghost 6-texture.png",
+    "hotend_model": "",
+    "default_materials": "FlyingBear Generic ABS;FlyingBear Generic PA-CF;FlyingBear Generic PC;FlyingBear Generic PETG;FlyingBear Generic PLA;FlyingBear Generic TPU"
+}

resources/profiles/FlyingBear/machine/S1/FlyingBear S1 0.4 nozzle.json

@@ -115,7 +115,7 @@
       "0"
   ],
   "machine_pause_gcode": "PAUSE",
-  "machine_start_gcode": ";v2.9-20240311;\n;wiping nozzle start\nM106 P3 S0\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F6000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F6000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[0] + 60,print_bed_max[0])} F6000 \nG1 Z0.2 F600\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR                                  \nBED_MESH_PROFILE LOAD=default   # bedmesh load\nG92 E0 ;Reset Extruder\nG1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\nG92 E0 ;reset extruder\nG1 E4 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[0] + 60,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)}  F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
+  "machine_start_gcode": ";v2.9.1-20240620;\n;wiping nozzle start\nM106 P3 S0\nclean_nozzle_position\n;wiping nozzle end\n;*************preheat nozzle and hotbed for Z_TILT_ADJUST*************\nM140 S[bed_temperature_initial_layer_single]\nM104 S130\nG1 X110 Y110 F6000 \nG4 P200\nprobe\nSET_KINEMATIC_POSITION Z=0 ;Z homing\nZ_TILT_ADJUST \n;*************Z_TILT_ADJUST end*************\nM140 S[bed_temperature_initial_layer_single] ;heat hotbed temp set by user\nG1 X5 Y5 F6000 \nG28 \nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[0] + 60,print_bed_max[0])} F6000 \nG1 Z0.2 F600\nM104 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user\nM106 S100 ;close head_nozzle fan\nG4 P3000\nM106 S255 ;close head_nozzle fan\nG4 P3000\nM106 S100 ;close head_nozzle fan\n;*************PRINT START*************\nM109 S[nozzle_temperature_initial_layer] ;heat nozzle temp set by user and wait \nM190 S[bed_temperature_initial_layer_single];heat bed temp set by user and wait \nM106 S0 ;close head_nozzle fan\nBED_MESH_CLEAR                                  \nBED_MESH_PROFILE LOAD=default   # bedmesh load\nG92 E0 ;Reset Extruder\nG1 Z4.0 F200 ;Move Z Axis up\nG90 ;absolute position\n ; ; ; ; ; ; ; ; ; draw line along model\nG92 E0 ;reset extruder\nG1 E4 F300 ;extrude filament\nG1 X{first_layer_print_min[0]-1.5} Y{min(first_layer_print_min[1] + 60,print_bed_max[0])} F6000 \nG1 Z0.22 F600\nG1 X{first_layer_print_min[0]-1.5} Y{max(0, first_layer_print_min[1]-1.5)}  F2000 E10\nG1 Z0.22 F600\nG1 X{min(first_layer_print_min[0] + 60,print_bed_max[0])} F1200 E12\n ; ; ; ; ; ; ; ; ;draw line along model end \nG4 P200\nG1 Z2\nG92 E0 ;Reset Extruder\nCLEAR_PAUSE\n;***********model start************\n",
   "machine_unload_filament_time": "0",
   "max_layer_height": [
       "0.28"

resources/profiles/FlyingBear/machine/fdm_marlin_common.json

@@ -0,0 +1,119 @@
+{
+  "type": "machine",
+  "name": "fdm_marlin_common",
+  "from": "system",
+  "instantiation": "false",
+  "printer_technology": "FFF",
+  "deretraction_speed": [
+      "40"
+  ],
+  "extruder_colour": [
+      "#FCE94F"
+  ],
+  "extruder_offset": [
+      "0x0"
+  ],
+  "gcode_flavor": "marlin",
+  "silent_mode": "0",
+  "machine_max_acceleration_e": [
+      "5000"
+  ],
+  "machine_max_acceleration_extruding": [
+      "10000"
+  ],
+  "machine_max_acceleration_retracting": [
+      "1000"
+  ],
+  "machine_max_acceleration_x": [
+      "10000"
+  ],
+  "machine_max_acceleration_y": [
+      "10000"
+  ],
+  "machine_max_acceleration_z": [
+      "500"
+  ],
+  "machine_max_speed_e": [
+      "60"
+  ],
+  "machine_max_speed_x": [
+      "500"
+  ],
+  "machine_max_speed_y": [
+      "500"
+  ],
+  "machine_max_speed_z": [
+      "10"
+  ],
+  "machine_max_jerk_e": [
+      "5"
+  ],
+  "machine_max_jerk_x": [
+      "8"
+  ],
+  "machine_max_jerk_y": [
+      "8"
+  ],
+  "machine_max_jerk_z": [
+      "0.4"
+  ],
+  "machine_min_extruding_rate": [
+      "0"
+  ],
+  "machine_min_travel_rate": [
+      "0"
+  ],
+  "max_layer_height": [
+      "0.32"
+  ],
+  "min_layer_height": [
+      "0.08"
+  ],
+  "printable_height": "250",
+  "extruder_clearance_radius": "65",
+  "extruder_clearance_height_to_rod": "36",
+  "extruder_clearance_height_to_lid": "140",
+  "nozzle_diameter": [
+      "0.4"
+  ],
+  "printer_settings_id": "",
+  "printer_variant": "0.4",
+  "retraction_minimum_travel": [
+      "2"
+  ],
+  "retract_before_wipe": [
+      "70%"
+  ],
+  "retract_when_changing_layer": [
+      "1"
+  ],
+  "retraction_length": [
+      "5"
+  ],
+  "retract_length_toolchange": [
+      "1"
+  ],
+  "z_hop": [
+      "0"
+  ],
+  "retract_restart_extra": [
+      "0"
+  ],
+  "retract_restart_extra_toolchange": [
+      "0"
+  ],
+  "retraction_speed": [
+      "60"
+  ],
+  "single_extruder_multi_material": "1",
+  "change_filament_gcode": "",
+  "wipe": [
+      "1"
+  ],
+  "default_print_profile": "",
+  "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
+  "machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-4.0 F3600; retract \nG91\nG1 Z3;\nM104 S0 ; turn off hotend\nM140 S0 ; turn off bed\nM106 S0 ; turn off fan\nG90 \nG0 X110 Y200 F3600 \nprint_end",
+  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
+  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
+  "machine_pause_gcode": "M601"
+}

resources/profiles/FlyingBear/process/0.12mm Fine @FlyingBear Ghost 6 0.4 nozzle.json

@@ -0,0 +1,13 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.12mm Fine @FlyingBear Ghost 6 0.4 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_ghost_6",
+    "instantiation": "true",
+    "compatible_printers": ["FlyingBear Ghost 6 0.4 nozzle"],
+    "layer_height": "0.12",
+    "initial_layer_print_height": "0.12",
+    "bottom_shell_layers": "5",
+    "top_shell_layers": "5"
+}

resources/profiles/FlyingBear/process/0.16mm Optimal @FlyingBear Ghost 6 0.4 nozzle.json

@@ -0,0 +1,13 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.16mm Optimal @FlyingBear Ghost 6 0.4 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_ghost_6",
+    "instantiation": "true",
+    "compatible_printers": ["FlyingBear Ghost 6 0.4 nozzle"],
+    "layer_height": "0.16",
+    "initial_layer_print_height": "0.16",
+    "bottom_shell_layers": "4",
+    "top_shell_layers": "4"
+}

resources/profiles/FlyingBear/process/0.20mm Standard @FlyingBear Ghost 6 0.4 nozzle.json

@@ -0,0 +1,13 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.20mm Standard @FlyingBear Ghost 6 0.4 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_ghost_6",
+    "instantiation": "true",
+    "compatible_printers": ["FlyingBear Ghost 6 0.4 nozzle"],
+    "layer_height": "0.2",
+    "initial_layer_print_height": "0.2",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "3"
+}

resources/profiles/FlyingBear/process/0.24mm Draft @FlyingBear Ghost 6 0.4 nozzle.json

@@ -0,0 +1,13 @@
+{
+    "type": "process",
+    "setting_id": "GP004",
+    "name": "0.24mm Draft @FlyingBear Ghost 6 0.4 nozzle",
+    "from": "system",
+    "inherits": "fdm_process_ghost_6",
+    "instantiation": "true",
+    "compatible_printers": ["FlyingBear Ghost 6 0.4 nozzle"],
+    "layer_height": "0.24",
+    "initial_layer_print_height": "0.24",
+    "bottom_shell_layers": "3",
+    "top_shell_layers": "3"
+}

resources/profiles/FlyingBear/process/fdm_process_ghost_6.json

@@ -0,0 +1,41 @@
+{
+  "type": "process",
+  "name": "fdm_process_ghost_6",
+  "from": "system",
+  "instantiation": "false",
+  "inherits": "fdm_process_marlin_common",
+  "wall_generator": "arachne",
+  "elefant_foot_compensation": "0.15",
+  "elefant_foot_compensation_layers": "1",
+  "infill_wall_overlap": "15%",
+  "top_shell_thickness": "0.6",
+  "internal_bridge_speed": "150%",
+
+  "layer_height": "0.2",
+  "bottom_shell_layers": "3",
+  "top_shell_layers": "3",
+  "initial_layer_print_height": "0.2",
+  "initial_layer_speed": "45",
+  "initial_layer_infill_speed": "60",
+  "outer_wall_speed": "60",
+  "inner_wall_speed": "80",
+  "sparse_infill_speed": "80",
+  "internal_solid_infill_speed": "80",
+  "top_surface_speed": "50",
+  "gap_infill_speed": "80",
+  "ironing_speed": "30",
+  "overhang_1_4_speed": "0",
+  "overhang_2_4_speed": "50",
+  "overhang_3_4_speed": "30",
+  "overhang_4_4_speed": "10",
+  "bridge_speed": "50",
+  "travel_speed": "150",
+  "support_interface_speed": "40",
+  "support_speed": "60",
+  "default_acceleration": "1000",
+  "outer_wall_acceleration": "1000",
+  "inner_wall_acceleration": "1000",
+  "initial_layer_acceleration": "500",
+  "top_surface_acceleration": "1000",
+  "travel_acceleration": "1500"
+}

resources/profiles/FlyingBear/process/fdm_process_marlin_common.json

@@ -0,0 +1,109 @@
+{
+  "type": "process",
+  "name": "fdm_process_marlin_common",
+  "from": "system",
+  "instantiation": "false",
+  "adaptive_layer_height": "0",
+  "reduce_crossing_wall": "0",
+  "max_travel_detour_distance": "0",
+  "bottom_surface_pattern": "monotonic",
+  "bottom_shell_thickness": "0",
+  "bridge_speed": "50",
+  "brim_width": "5",
+  "brim_object_gap": "0.1",
+  "compatible_printers_condition": "",
+  "print_sequence": "by layer",
+  "default_acceleration": "1000",
+  "initial_layer_acceleration": "500",
+  "top_surface_acceleration": "1000",
+  "travel_acceleration": "1000",
+  "inner_wall_acceleration": "1000",
+  "outer_wall_acceleration": "1000",
+  "bridge_no_support": "0",
+  "draft_shield": "disabled",
+  "elefant_foot_compensation": "0",
+  "enable_arc_fitting": "0",
+  "wall_infill_order": "inner wall/outer wall/infill",
+  "infill_direction": "45",
+  "sparse_infill_density": "15%",
+  "sparse_infill_pattern": "crosshatch",
+  "initial_layer_print_height": "0.2",
+  "infill_combination": "0",
+  "infill_wall_overlap": "25%",
+  "interface_shells": "0",
+  "ironing_flow": "10%",
+  "ironing_spacing": "0.15",
+  "ironing_speed": "30",
+  "ironing_type": "no ironing",
+  "reduce_infill_retraction": "1",
+  "filename_format": "{input_filename_base}_{filament_type[initial_tool]}_{print_time}.gcode",
+  "detect_overhang_wall": "1",
+  "slowdown_for_curled_perimeters": "1",
+  "overhang_1_4_speed": "0",
+  "overhang_2_4_speed": "50",
+  "overhang_3_4_speed": "30",
+  "overhang_4_4_speed": "10",
+  "line_width": "0.42",
+  "inner_wall_line_width": "0.45",
+  "outer_wall_line_width": "0.42",
+  "top_surface_line_width": "0.42",
+  "sparse_infill_line_width": "0.45",
+  "initial_layer_line_width": "0.5",
+  "internal_solid_infill_line_width": "0.42",
+  "support_line_width": "0.42",
+  "wall_loops": "3",
+  "print_settings_id": "",
+  "raft_layers": "0",
+  "seam_position": "aligned",
+  "skirt_distance": "2",
+  "skirt_height": "1",
+  "min_skirt_length": "4",
+  "skirt_loops": "0",
+  "minimum_sparse_infill_area": "15",
+  "spiral_mode": "0",
+  "standby_temperature_delta": "-5",
+  "enable_support": "0",
+  "resolution": "0.012",
+  "support_type": "normal(auto)",
+  "support_on_build_plate_only": "0",
+  "support_top_z_distance": "0.2",
+  "support_bottom_z_distance": "0.2",
+  "support_filament": "0",
+  "support_interface_loop_pattern": "0",
+  "support_interface_filament": "0",
+  "support_interface_top_layers": "2",
+  "support_interface_bottom_layers": "2",
+  "support_interface_spacing": "0.5",
+  "support_interface_speed": "40",
+  "support_base_pattern": "rectilinear",
+  "support_base_pattern_spacing": "2.5",
+  "support_speed": "60",
+  "support_threshold_angle": "30",
+  "support_object_xy_distance": "0.35",
+  "tree_support_branch_angle": "45",
+  "tree_support_wall_count": "0",
+  "tree_support_with_infill": "0",
+  "detect_thin_wall": "0",
+  "top_surface_pattern": "monotonicline",
+  "top_shell_thickness": "0.8",
+  "enable_prime_tower": "0",
+  "wipe_tower_no_sparse_layers": "0",
+  "prime_tower_width": "60",
+  "xy_hole_compensation": "0",
+  "xy_contour_compensation": "0",
+  "layer_height": "0.2",
+  "bottom_shell_layers": "3",
+  "top_shell_layers": "3",
+  "bridge_flow": "0.95",
+  "initial_layer_speed": "45",
+  "initial_layer_infill_speed": "60",
+  "outer_wall_speed": "60",
+  "inner_wall_speed": "80",
+  "sparse_infill_speed": "80",
+  "internal_solid_infill_speed": "80",
+  "top_surface_speed": "50",
+  "gap_infill_speed": "80",
+  "travel_speed": "150",
+  "inherits": "fdm_process_common",
+  "support_style": "default"
+}

resources/profiles/Folgertech.json

@@ -1,6 +1,6 @@
 {
     "name": "Folgertech",
-    "version": "02.01.00.01",
+    "version": "02.01.01.00",
     "force_update": "0",
     "description": "Folgertech configurations",
     "machine_model_list": [

resources/profiles/Geeetech.json

@@ -0,0 +1,618 @@
+{
+    "name": "Geeetech",
+    "version": "02.01.01.00",
+    "force_update": "0",
+    "description": "Geeetech configurations",
+    "machine_model_list": [
+        {
+            "name": "Geeetech Thunder",
+            "sub_path": "machine/Geeetech Thunder.json"
+        },
+		{
+            "name": "Geeetech Mizar M",
+            "sub_path": "machine/Geeetech Mizar M.json"
+        },
+		{
+            "name": "Geeetech Mizar S",
+            "sub_path": "machine/Geeetech Mizar S.json"
+        },
+		{
+            "name": "Geeetech Mizar Pro",
+            "sub_path": "machine/Geeetech Mizar Pro.json"
+        },
+       {
+            "name": "Geeetech Mizar Max",
+            "sub_path": "machine/Geeetech Mizar Max.json"
+        },		
+        {
+            "name": "Geeetech Mizar",
+            "sub_path": "machine/Geeetech Mizar.json"
+        },
+        {
+            "name": "Geeetech A10 Pro",
+            "sub_path": "machine/Geeetech A10 Pro.json"
+        },
+        {
+            "name": "Geeetech A10 M",
+            "sub_path": "machine/Geeetech A10 M.json"
+        },
+        {
+            "name": "Geeetech A10 T",
+            "sub_path": "machine/Geeetech A10 T.json"
+        },
+        {
+            "name": "Geeetech A20",
+            "sub_path": "machine/Geeetech A20.json"
+        },
+        {
+            "name": "Geeetech A20 M",
+            "sub_path": "machine/Geeetech A20 M.json"
+        },
+        {
+            "name": "Geeetech A20 T",
+            "sub_path": "machine/Geeetech A20 T.json"
+        },
+        {
+            "name": "Geeetech A30 Pro",
+            "sub_path": "machine/Geeetech A30 Pro.json"
+        },
+        {
+            "name": "Geeetech A30 M",
+            "sub_path": "machine/Geeetech A30 M.json"
+        },
+        {
+            "name": "Geeetech A30 T",
+            "sub_path": "machine/Geeetech A30 T.json"
+        }
+    ],
+    "process_list": [
+        {
+            "name": "fdm_process_common",
+            "sub_path": "process/fdm_process_common.json"
+        },
+        {
+            "name": "fdm_process_geeetech_common",
+            "sub_path": "process/fdm_process_geeetech_common.json"
+        },
+        {
+            "name": "fdm_process_Geeetech_HS",
+            "sub_path": "process/fdm_process_Geeetech_HS.json"
+        },
+        {
+            "name": "fdm_process_Geeetech_HS_0.08",
+            "sub_path": "process/fdm_process_Geeetech_HS_0.08.json"
+        },
+        {
+            "name": "fdm_process_Geeetech_HS_0.08_nozzle_0.2",
+            "sub_path": "process/fdm_process_Geeetech_HS_0.08_nozzle_0.2.json"
+        },
+        {
+            "name": "fdm_process_Geeetech_HS_0.10",
+            "sub_path": "process/fdm_process_Geeetech_HS_0.10.json"
+        },
+        {
+            "name": "fdm_process_Geeetech_HS_0.10_nozzle_0.2",
+            "sub_path": "process/fdm_process_Geeetech_HS_0.10_nozzle_0.2.json"
+        },
+        {
+            "name": "fdm_process_Geeetech_HS_0.12_nozzle_0.2",
+            "sub_path": "process/fdm_process_Geeetech_HS_0.12_nozzle_0.2.json"
+        },
+        {
+            "name": "fdm_process_Geeetech_HS_0.14_nozzle_0.2",
+            "sub_path": "process/fdm_process_Geeetech_HS_0.14_nozzle_0.2.json"
+        },
+        {
+            "name": "fdm_process_Geeetech_HS_0.16",
+            "sub_path": "process/fdm_process_Geeetech_HS_0.16.json"
+        },
+        {
+            "name": "fdm_process_Geeetech_HS_0.20",
+            "sub_path": "process/fdm_process_Geeetech_HS_0.20.json"
+        },
+        {
+            "name": "fdm_process_Geeetech_HS_0.24_nozzle_0.6",
+            "sub_path": "process/fdm_process_Geeetech_HS_0.24_nozzle_0.6.json"
+        },
+        {
+            "name": "fdm_process_Geeetech_HS_0.30_nozzle_0.6",
+            "sub_path": "process/fdm_process_Geeetech_HS_0.30_nozzle_0.6.json"
+        },
+        {
+            "name": "fdm_process_Geeetech_HS_0.25",
+            "sub_path": "process/fdm_process_Geeetech_HS_0.25.json"
+        },
+        {
+            "name": "fdm_process_Geeetech_HS_0.36_nozzle_0.6",
+            "sub_path": "process/fdm_process_Geeetech_HS_0.36_nozzle_0.6.json"
+        },
+        {
+            "name": "fdm_process_Geeetech_HS_0.36_nozzle_0.8",
+            "sub_path": "process/fdm_process_Geeetech_HS_0.36_nozzle_0.8.json"
+        },
+        {
+            "name": "fdm_process_Geeetech_HS_0.44_nozzle_0.8",
+            "sub_path": "process/fdm_process_Geeetech_HS_0.44_nozzle_0.8.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.06_nozzle_0.2",
+            "sub_path": "process/fdm_process_geeetech_0.06_nozzle_0.2.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.08",
+            "sub_path": "process/fdm_process_geeetech_0.08.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.08_nozzle_0.2",
+            "sub_path": "process/fdm_process_geeetech_0.08_nozzle_0.2.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.10_nozzle_0.2",
+            "sub_path": "process/fdm_process_geeetech_0.10_nozzle_0.2.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.12",
+            "sub_path": "process/fdm_process_geeetech_0.12.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.12_nozzle_0.2",
+            "sub_path": "process/fdm_process_geeetech_0.12_nozzle_0.2.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.14_nozzle_0.2",
+            "sub_path": "process/fdm_process_geeetech_0.14_nozzle_0.2.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.16",
+            "sub_path": "process/fdm_process_geeetech_0.16.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.18_nozzle_0.6",
+            "sub_path": "process/fdm_process_geeetech_0.18_nozzle_0.6.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.20",
+            "sub_path": "process/fdm_process_geeetech_0.20.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.24",
+            "sub_path": "process/fdm_process_geeetech_0.24.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.24_nozzle_0.6",
+            "sub_path": "process/fdm_process_geeetech_0.24_nozzle_0.6.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.24_nozzle_0.8",
+            "sub_path": "process/fdm_process_geeetech_0.24_nozzle_0.8.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.28",
+            "sub_path": "process/fdm_process_geeetech_0.28.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.30_nozzle_0.6",
+            "sub_path": "process/fdm_process_geeetech_0.30_nozzle_0.6.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.32_nozzle_0.8",
+            "sub_path": "process/fdm_process_geeetech_0.32_nozzle_0.8.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.36_nozzle_0.6",
+            "sub_path": "process/fdm_process_geeetech_0.36_nozzle_0.6.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.40_nozzle_0.8",
+            "sub_path": "process/fdm_process_geeetech_0.40_nozzle_0.8.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.42_nozzle_0.6",
+            "sub_path": "process/fdm_process_geeetech_0.42_nozzle_0.6.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.48_nozzle_0.8",
+            "sub_path": "process/fdm_process_geeetech_0.48_nozzle_0.8.json"
+        },
+        {
+            "name": "fdm_process_geeetech_0.56_nozzle_0.8",
+            "sub_path": "process/fdm_process_geeetech_0.56_nozzle_0.8.json"
+        },				
+        {
+            "name": "0.06mm Fine @Geeetech common 0.2 nozzle",
+            "sub_path": "process/0.06mm Fine @Geeetech common 0.2 nozzle.json"
+        },
+        {
+            "name": "0.08mm Extra Fine @Geeetech common",
+            "sub_path": "process/0.08mm Extra Fine @Geeetech common.json"
+        },		
+        {
+            "name": "0.08mm Extra Fine @Geeetech Thunder",
+            "sub_path": "process/0.08mm Extra Fine @Geeetech Thunder.json"
+        },
+        {
+            "name": "0.08mm Optimal @Geeetech common 0.2 nozzle",
+            "sub_path": "process/0.08mm Optimal @Geeetech common 0.2 nozzle.json"
+        },
+        {
+            "name": "0.08mm Optimal @Geeetech Thunder 0.2 nozzle",
+            "sub_path": "process/0.08mm Optimal @Geeetech Thunder 0.2 nozzle.json"
+        },
+        {
+            "name": "0.10mm Fine @Geeetech Thunder",
+            "sub_path": "process/0.10mm Fine @Geeetech Thunder.json"
+        },
+        {
+            "name": "0.10mm Standard @Geeetech common 0.2 nozzle",
+            "sub_path": "process/0.10mm Standard @Geeetech common 0.2 nozzle.json"
+        },
+        {
+            "name": "0.10mm Standard @Geeetech Thunder 0.2 nozzle",
+            "sub_path": "process/0.10mm Standard @Geeetech Thunder 0.2 nozzle.json"
+        },
+        {
+            "name": "0.12mm Draft @Geeetech common 0.2 nozzle",
+            "sub_path": "process/0.12mm Draft @Geeetech common 0.2 nozzle.json"
+        },
+        {
+            "name": "0.12mm Draft @Geeetech Thunder 0.2 nozzle",
+            "sub_path": "process/0.12mm Draft @Geeetech Thunder 0.2 nozzle.json"
+        },
+        {
+            "name": "0.12mm Fine @Geeetech common",
+            "sub_path": "process/0.12mm Fine @Geeetech common.json"
+        },
+        {
+            "name": "0.14mm Extra Draft @Geeetech common 0.2 nozzle",
+            "sub_path": "process/0.14mm Extra Draft @Geeetech common 0.2 nozzle.json"
+        },
+        {
+            "name": "0.14mm Extra Draft @Geeetech Thunder 0.2 nozzle",
+            "sub_path": "process/0.14mm Extra Draft @Geeetech Thunder 0.2 nozzle.json"
+        },
+        {
+            "name": "0.16mm Optimal @Geeetech common",
+            "sub_path": "process/0.16mm Optimal @Geeetech common.json"
+        },
+        {
+            "name": "0.16mm Optimal @Geeetech Thunder",
+            "sub_path": "process/0.16mm Optimal @Geeetech Thunder.json"
+        },
+        {
+            "name": "0.18mm Fine @Geeetech common 0.6 nozzle",
+            "sub_path": "process/0.18mm Fine @Geeetech common 0.6 nozzle.json"
+        },
+        {
+            "name": "0.20mm Standard @Geeetech common",
+            "sub_path": "process/0.20mm Standard @Geeetech common.json"
+        },
+        {
+            "name": "0.20mm Standard @Geeetech Thunder",
+            "sub_path": "process/0.20mm Standard @Geeetech Thunder.json"
+        },
+        {
+            "name": "0.20mm Strength @Geeetech common",
+            "sub_path": "process/0.20mm Strength @Geeetech common.json"
+        },
+        {
+            "name": "0.24mm Draft @Geeetech common",
+            "sub_path": "process/0.24mm Draft @Geeetech common.json"
+        },
+        {
+            "name": "0.24mm Fine @Geeetech common 0.8 nozzle",
+            "sub_path": "process/0.24mm Fine @Geeetech common 0.8 nozzle.json"
+        },
+        {
+            "name": "0.24mm Optimal @Geeetech common 0.6 nozzle",
+            "sub_path": "process/0.24mm Optimal @Geeetech common 0.6 nozzle.json"
+        },
+        {
+            "name": "0.24mm Optimal @Geeetech Thunder 0.6 nozzle",
+            "sub_path": "process/0.24mm Optimal @Geeetech Thunder 0.6 nozzle.json"
+        },
+        {
+            "name": "0.25mm Draft @Geeetech Thunder",
+            "sub_path": "process/0.25mm Draft @Geeetech Thunder.json"
+        },
+        {
+            "name": "0.28mm Extra Draft @Geeetech common",
+            "sub_path": "process/0.28mm Extra Draft @Geeetech common.json"
+        },
+        {
+            "name": "0.30mm Standard @Geeetech common 0.6 nozzle",
+            "sub_path": "process/0.30mm Standard @Geeetech common 0.6 nozzle.json"
+        },
+        {
+            "name": "0.30mm Standard @Geeetech Thunder 0.6 nozzle",
+            "sub_path": "process/0.30mm Standard @Geeetech Thunder 0.6 nozzle.json"
+        },
+        {
+            "name": "0.30mm Strength @Geeetech common 0.6 nozzle",
+            "sub_path": "process/0.30mm Strength @Geeetech common 0.6 nozzle.json"
+        },
+        {
+            "name": "0.32mm Optimal @Geeetech common 0.8 nozzle",
+            "sub_path": "process/0.32mm Optimal @Geeetech common 0.8 nozzle.json"
+        },
+        {
+            "name": "0.36mm Draft @Geeetech common 0.6 nozzle",
+            "sub_path": "process/0.36mm Draft @Geeetech common 0.6 nozzle.json"
+        },
+        {
+            "name": "0.36mm Draft @Geeetech Thunder 0.6 nozzle",
+            "sub_path": "process/0.36mm Draft @Geeetech Thunder 0.6 nozzle.json"
+        },
+        {
+            "name": "0.36mm Optimal @Geeetech Thunder 0.8 nozzle",
+            "sub_path": "process/0.36mm Optimal @Geeetech Thunder 0.8 nozzle.json"
+        },
+        {
+            "name": "0.40mm Standard @Geeetech common 0.8 nozzle",
+            "sub_path": "process/0.40mm Standard @Geeetech common 0.8 nozzle.json"
+        },
+        {
+            "name": "0.42mm Extra Draft @Geeetech common 0.6 nozzle",
+            "sub_path": "process/0.42mm Extra Draft @Geeetech common 0.6 nozzle.json"
+        },
+        {
+            "name": "0.44mm Draft @Geeetech Thunder 0.8 nozzle",
+            "sub_path": "process/0.44mm Draft @Geeetech Thunder 0.8 nozzle.json"
+        },
+        {
+            "name": "0.48mm Draft @Geeetech common 0.8 nozzle",
+            "sub_path": "process/0.48mm Draft @Geeetech common 0.8 nozzle.json"
+        },
+        {
+            "name": "0.56mm Extra Draft @Geeetech common 0.8 nozzle",
+            "sub_path": "process/0.56mm Extra Draft @Geeetech common 0.8 nozzle.json"
+        }
+    ],
+    "filament_list": [
+        {
+            "name": "fdm_filament_common",
+            "sub_path": "filament/fdm_filament_common.json"
+        },
+        {
+            "name": "fdm_filament_abs",
+            "sub_path": "filament/fdm_filament_abs.json"
+        },
+        {
+            "name": "fdm_filament_asa",
+            "sub_path": "filament/fdm_filament_asa.json"
+        },
+        {
+            "name": "fdm_filament_pa",
+            "sub_path": "filament/fdm_filament_pa.json"
+        },
+        {
+            "name": "fdm_filament_pc",
+            "sub_path": "filament/fdm_filament_pc.json"
+        },
+        {
+            "name": "fdm_filament_pet",
+            "sub_path": "filament/fdm_filament_pet.json"
+        },
+        {
+            "name": "fdm_filament_pva",
+            "sub_path": "filament/fdm_filament_pva.json"
+        },
+        {
+            "name": "fdm_filament_pla",
+            "sub_path": "filament/fdm_filament_pla.json"
+        },
+        {
+            "name": "fdm_filament_tpu",
+            "sub_path": "filament/fdm_filament_tpu.json"
+        },
+        {
+            "name": "Generic ABS @Geeetech",
+            "sub_path": "filament/Generic ABS @Geeetech.json"
+        },
+        {
+            "name": "Generic ASA @Geeetech",
+            "sub_path": "filament/Generic ASA @Geeetech.json"
+        },
+        {
+            "name": "Generic PA @Geeetech",
+            "sub_path": "filament/Generic PA @Geeetech.json"
+        },
+        {
+            "name": "Generic PC @Geeetech",
+            "sub_path": "filament/Generic PC @Geeetech.json"
+        },
+        {
+            "name": "Generic PETG @Geeetech",
+            "sub_path": "filament/Generic PETG @Geeetech.json"
+        },
+        {
+            "name": "Generic PLA @Geeetech",
+            "sub_path": "filament/Generic PLA @Geeetech.json"
+        },
+        {
+            "name": "Generic PLA @Geeetech_FastSpeed",
+            "sub_path": "filament/Generic PLA @Geeetech_FastSpeed.json"
+        },		
+        {
+            "name": "Generic PLA-CF @Geeetech",
+            "sub_path": "filament/Generic PLA-CF @Geeetech.json"
+        },
+        {
+            "name": "Generic PVA @Geeetech",
+            "sub_path": "filament/Generic PVA @Geeetech.json"
+        },
+        {
+            "name": "Generic TPU @Geeetech",
+            "sub_path": "filament/Generic TPU @Geeetech.json"
+        }
+    ],
+    "machine_list": [
+        {
+            "name": "fdm_machine_common",
+            "sub_path": "machine/fdm_machine_common.json"
+        },
+        {
+            "name": "fdm_geeetech_common",
+            "sub_path": "machine/fdm_geeetech_common.json"
+        },
+        {
+            "name": "fdm_Geeetech_HS_common",
+            "sub_path": "machine/fdm_Geeetech_HS_common.json"
+        },
+        {
+            "name": "Geeetech Thunder 0.2 nozzle",
+            "sub_path": "machine/Geeetech Thunder 0.2 nozzle.json"
+        },
+        {
+            "name": "Geeetech Thunder 0.4 nozzle",
+            "sub_path": "machine/Geeetech Thunder 0.4 nozzle.json"
+        },
+        {
+            "name": "Geeetech Thunder 0.6 nozzle",
+            "sub_path": "machine/Geeetech Thunder 0.6 nozzle.json"
+        },
+        {
+            "name": "Geeetech Thunder 0.8 nozzle",
+            "sub_path": "machine/Geeetech Thunder 0.8 nozzle.json"
+        },
+        {
+            "name": "Geeetech Mizar 0.2 nozzle",
+            "sub_path": "machine/Geeetech Mizar 0.2 nozzle.json"
+        },
+        {
+            "name": "Geeetech Mizar 0.4 nozzle",
+            "sub_path": "machine/Geeetech Mizar 0.4 nozzle.json"
+        },
+        {
+            "name": "Geeetech Mizar 0.6 nozzle",
+            "sub_path": "machine/Geeetech Mizar 0.6 nozzle.json"
+        },
+        {
+            "name": "Geeetech Mizar 0.8 nozzle",
+            "sub_path": "machine/Geeetech Mizar 0.8 nozzle.json"
+        },
+        {
+            "name": "Geeetech Mizar S 0.2 nozzle",
+            "sub_path": "machine/Geeetech Mizar S 0.2 nozzle.json"
+        },
+        {
+            "name": "Geeetech Mizar S 0.4 nozzle",
+            "sub_path": "machine/Geeetech Mizar S 0.4 nozzle.json"
+        },
+        {
+            "name": "Geeetech Mizar S 0.6 nozzle",
+            "sub_path": "machine/Geeetech Mizar S 0.6 nozzle.json"
+        },
+        {
+            "name": "Geeetech Mizar S 0.8 nozzle",
+            "sub_path": "machine/Geeetech Mizar S 0.8 nozzle.json"
+        },
+        {
+            "name": "Geeetech Mizar Pro 0.2 nozzle",
+            "sub_path": "machine/Geeetech Mizar Pro 0.2 nozzle.json"
+        },
+        {
+            "name": "Geeetech Mizar Pro 0.4 nozzle",
+            "sub_path": "machine/Geeetech Mizar Pro 0.4 nozzle.json"
+        },
+        {
+            "name": "Geeetech Mizar Pro 0.6 nozzle",
+            "sub_path": "machine/Geeetech Mizar Pro 0.6 nozzle.json"
+        },
+        {
+            "name": "Geeetech Mizar Pro 0.8 nozzle",
+            "sub_path": "machine/Geeetech Mizar Pro 0.8 nozzle.json"
+        },
+        {
+            "name": "Geeetech Mizar Max 0.2 nozzle",
+            "sub_path": "machine/Geeetech Mizar Max 0.2 nozzle.json"
+        },
+        {
+            "name": "Geeetech Mizar Max 0.4 nozzle",
+            "sub_path": "machine/Geeetech Mizar Max 0.4 nozzle.json"
+        },
+        {
+            "name": "Geeetech Mizar Max 0.6 nozzle",
+            "sub_path": "machine/Geeetech Mizar Max 0.6 nozzle.json"
+        },
+        {
+            "name": "Geeetech Mizar Max 0.8 nozzle",
+            "sub_path": "machine/Geeetech Mizar Max 0.8 nozzle.json"
+        },
+        {
+            "name": "Geeetech Mizar M 0.4 nozzle",
+            "sub_path": "machine/Geeetech Mizar M 0.4 nozzle.json"
+        },
+        {
+            "name": "Geeetech A10 Pro 0.2 nozzle",
+            "sub_path": "machine/Geeetech A10 Pro 0.2 nozzle.json"
+        },
+        {
+            "name": "Geeetech A10 Pro 0.4 nozzle",
+            "sub_path": "machine/Geeetech A10 Pro 0.4 nozzle.json"
+        },
+        {
+            "name": "Geeetech A10 Pro 0.6 nozzle",
+            "sub_path": "machine/Geeetech A10 Pro 0.6 nozzle.json"
+        },
+        {
+            "name": "Geeetech A10 Pro 0.8 nozzle",
+            "sub_path": "machine/Geeetech A10 Pro 0.8 nozzle.json"
+        },
+        {
+            "name": "Geeetech A10 M 0.4 nozzle",
+            "sub_path": "machine/Geeetech A10 M 0.4 nozzle.json"
+        },
+        {
+            "name": "Geeetech A10 T 0.4 nozzle",
+            "sub_path": "machine/Geeetech A10 T 0.4 nozzle.json"
+        },
+        {
+            "name": "Geeetech A20 0.2 nozzle",
+            "sub_path": "machine/Geeetech A20 0.2 nozzle.json"
+        },
+        {
+            "name": "Geeetech A20 0.4 nozzle",
+            "sub_path": "machine/Geeetech A20 0.4 nozzle.json"
+        },
+        {
+            "name": "Geeetech A20 0.6 nozzle",
+            "sub_path": "machine/Geeetech A20 0.6 nozzle.json"
+        },
+        {
+            "name": "Geeetech A20 0.8 nozzle",
+            "sub_path": "machine/Geeetech A20 0.8 nozzle.json"
+        },
+        {
+            "name": "Geeetech A20 M 0.4 nozzle",
+            "sub_path": "machine/Geeetech A20 M 0.4 nozzle.json"
+        },
+        {
+            "name": "Geeetech A20 T 0.4 nozzle",
+            "sub_path": "machine/Geeetech A20 T 0.4 nozzle.json"
+        },
+        {
+            "name": "Geeetech A30 Pro 0.2 nozzle",
+            "sub_path": "machine/Geeetech A30 Pro 0.2 nozzle.json"
+        },
+        {
+            "name": "Geeetech A30 Pro 0.4 nozzle",
+            "sub_path": "machine/Geeetech A30 Pro 0.4 nozzle.json"
+        },
+        {
+            "name": "Geeetech A30 Pro 0.6 nozzle",
+            "sub_path": "machine/Geeetech A30 Pro 0.6 nozzle.json"
+        },
+        {
+            "name": "Geeetech A30 Pro 0.8 nozzle",
+            "sub_path": "machine/Geeetech A30 Pro 0.8 nozzle.json"
+        },
+        {
+            "name": "Geeetech A30 M 0.4 nozzle",
+            "sub_path": "machine/Geeetech A30 M 0.4 nozzle.json"
+        },
+        {
+            "name": "Geeetech A30 T 0.4 nozzle",
+            "sub_path": "machine/Geeetech A30 T 0.4 nozzle.json"
+        }
+    ]
+}

resources/profiles/Geeetech/220x220.svg

@@ -0,0 +1,110 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<svg id="_图层_1" data-name=" 图层 1" xmlns="http://www.w3.org/2000/svg" width="220mm" height="220mm" viewBox="0 0 623.6 623.6">
+  <g>
+    <rect x="501.8" y="570.2" width="105.6" height="33.3" style="fill: none;"/>
+    <g>
+      <path d="M534.9,596.6h0l-12.3-21.2c0-.3-.3-.3-.6-.3s-.5,.2-.6,.3l-12.3,21.2c0,.3,0,.5,0,.7,0,.3,.3,.3,.6,.3h24.5c.3,0,.5-.2,.6-.3,0-.3,0-.5,0-.7h0Zm-23.9-.3l11-19,11,19h-22Z" style="fill: #fff;"/>
+      <rect x="516.7" y="593.9" width="10.8" height="1.1" style="fill: #fff;"/>
+      <path d="M520,593.1l-.6-.4c1.1-1.6,.5-2.5,0-3.6-.7-1.1-1.4-2.5,0-4.4l.6,.4c-1.1,1.5-.6,2.5,0,3.6,.7,1.1,1.4,2.5,0,4.4h0Z" style="fill: #fff;"/>
+      <path d="M522.6,593.1l-.6-.4c1.1-1.6,.5-2.5,0-3.6-.7-1.1-1.4-2.5,0-4.3l.6,.4c-1.1,1.5-.6,2.5,0,3.6,.7,1.1,1.4,2.5,0,4.3h0Z" style="fill: #fff;"/>
+      <path d="M525.2,593.1l-.6-.4c1.1-1.6,.6-2.5,0-3.6-.7-1.2-1.4-2.5,0-4.4l.6,.4c-1.1,1.6-.6,2.5,0,3.6,.7,1.2,1.4,2.5,0,4.4Z" style="fill: #fff;"/>
+    </g>
+    <g>
+      <path d="M541.3,584.3c-.5,0-.9,0-1.4-.2-.4,0-.8-.3-1-.6-.3-.3-.5-.7-.7-1.1-.2-.5-.3-1.1-.3-1.9s0-1.3,.3-1.7c.2-.5,.3-.8,.7-1.1,.3-.3,.6-.5,1-.6,.4,0,.8-.2,1.4-.2h.8c.3,0,.5,0,.7,.2v.8c-.2,0-.4-.2-.7-.2h-.8c-.3,0-.8,0-1,.2-.3,0-.5,.3-.8,.5-.2,.3-.3,.5-.4,.8s-.2,.8-.2,1.4,0,1,.2,1.4c0,.3,.3,.7,.4,.8s.4,.3,.7,.4,.6,.2,1,.2h.8c.3,0,.5,0,.8-.2v.8c-.2,0-.4,.2-.8,.3-.3,0-.6,0-1,0l.3-.2Z" style="fill: #fff;"/>
+      <path d="M546.5,578.6c.4,0,.8,0,1.1,.2,.3,0,.5,.2,.7,.3s.3,.3,.3,.5c0,.2,0,.4,0,.7v3.9h-.8l-.2-.8c0,.2-.2,.3-.3,.4s-.3,.3-.4,.3-.3,.2-.6,.2h-.6c-.7,0-1.1-.2-1.4-.4s-.4-.7-.4-1.2,0-.6,.2-.8c0-.3,.3-.4,.4-.5,.2-.2,.4-.3,.7-.3s.6,0,.9,0h1.7v-.8c0-.2,0-.3-.2-.3s-.3-.2-.4-.3h-1.3c-.2,0-.4,0-.6,0v-.8h1.2v-.2Zm-.7,5c.4,0,.8,0,1.2-.3s.6-.4,.7-.8v-.9h-2.2c-.2,0-.3,0-.4,.2s-.2,.2-.3,.3v.5c0,.3,0,.5,.3,.7s.4,.3,.8,.3h0Z" style="fill: #fff;"/>
+      <path d="M555,578.7v5.5h-.8v-.8l-.4,.4c0,0-.3,.2-.4,.3-.2,0-.3,0-.5,.2h-.5c-.3,0-.7,0-.9-.2-.3,0-.4-.2-.6-.3s-.3-.3-.3-.6,0-.4,0-.8v-3.8h.8v4.1c0,.2,0,.3,.2,.4s.2,.2,.3,.3,.3,0,.5,0h.5c.2,0,.3,0,.4-.2s.3-.2,.3-.3c0-.2,.2-.3,.3-.6v-3.7h1.1Z" style="fill: #fff;"/>
+      <path d="M558.6,583.5h.6v.8h-1.4c-.2,0-.3-.2-.5-.3-.2-.2-.3-.3-.3-.5,0-.3,0-.5,0-.8v-3.1h-.8v-.8h.8v-1.3h.8v1.3h1.4v.8h-1.4v3.6c0,0,0,.3,0,.3s.2,.2,.3,.2h.5Z" style="fill: #fff;"/>
+      <path d="M560.8,577.7c-.2,0-.3,0-.4,0,0,0,0-.2,0-.4s0-.3,0-.4c0,0,.3,0,.4,0s.3,0,.4,0c0,0,0,.2,0,.4s0,.3,0,.4c0,0-.3,0-.4,0Zm-.4,1h.8v5.5h-.8v-5.5Z" style="fill: #fff;"/>
+      <path d="M565.3,584.3c-.4,0-.8,0-1.1-.2-.3,0-.6-.3-.8-.5-.3-.3-.4-.5-.5-.8s-.2-.8-.2-1.4,0-1,.2-1.4c0-.3,.3-.7,.5-.8,.3-.3,.5-.3,.8-.5,.3,0,.7-.2,1.1-.2s.8,0,1.1,.2c.3,0,.6,.3,.8,.5,.3,.3,.3,.5,.5,.8,0,.3,.2,.8,.2,1.4s0,1-.2,1.4c0,.3-.3,.7-.5,.8-.3,.3-.5,.3-.8,.5-.3,0-.7,.2-1.1,.2Zm0-.8c.3,0,.6,0,.8,0s.3-.2,.5-.3c0-.2,.2-.3,.3-.7s0-.6,0-1v-1c0-.3-.2-.5-.3-.7s-.3-.3-.5-.3c-.2,0-.4,0-.8,0s-.6,0-.8,0c-.2,0-.3,.2-.5,.3,0,.2-.3,.4-.3,.7v2c0,.3,.2,.5,.3,.7,.2,.2,.3,.3,.5,.3s.4,0,.8,0Z" style="fill: #fff;"/>
+      <path d="M572,578.6c.3,0,.7,0,.9,.2,.3,0,.4,.3,.6,.3,.2,.2,.3,.3,.3,.6,0,.3,0,.4,0,.8v3.8h-.8v-4.1c0-.2,0-.3-.2-.4,0,0-.2-.2-.3-.3s-.3,0-.5,0h-.5c-.2,0-.3,0-.5,.2s-.3,.2-.4,.3-.3,.3-.3,.6v3.7h-.8v-5.5h.8v.8c0-.2,.2-.3,.3-.4s.3-.2,.4-.3,.3,0,.5-.2,.3,0,.5,0h-.2Z" style="fill: #fff;"/>
+      <path d="M583.7,577.1v7.1h-.9v-3.5h-3.5v3.5h-.9v-7.1h.9v2.9h3.5v-2.9h.9Z" style="fill: #fff;"/>
+      <path d="M586,577.7c-.2,0-.3,0-.4,0,0,0,0-.2,0-.4s0-.3,0-.4c0,0,.3,0,.4,0s.3,0,.4,0c0,0,0,.2,0,.4s0,.3,0,.4c0,0-.3,0-.4,0Zm-.4,1h.8v5.5h-.8v-5.5Z" style="fill: #fff;"/>
+      <path d="M592.9,578.7v5.2c0,.8-.3,1.4-.7,1.8s-1.1,.7-2,.7-.5,0-.7,0c-.3,0-.4,0-.6,0v-.8c.4,0,.8,0,1.4,0s1.1-.2,1.4-.4,.4-.8,.4-1.4v-.6c0,.3-.3,.6-.6,.8s-.7,.3-1.2,.3-.8,0-1.1-.2-.5-.3-.7-.6-.3-.5-.3-.8c0-.3,0-.8,0-1.2s0-.8,0-1.1c0-.3,.2-.7,.3-.9s.4-.4,.7-.6,.7-.3,1.1-.3,.5,0,.8,0c.2,0,.3,.2,.5,.3,.2,0,.3,.3,.3,.3,0,.2,.2,.3,.3,.4v-1h.8Zm-2.5,4.8c.3,0,.6,0,.8-.2,.3,0,.4-.3,.5-.4s.3-.4,.3-.7v-1.7c0-.3-.2-.5-.3-.7s-.3-.3-.5-.4-.5-.2-.8-.2-.6,0-.8,.2c-.2,0-.3,.3-.4,.4s-.2,.4-.2,.7v1.6c0,.3,0,.5,.2,.7,0,.2,.3,.3,.4,.4s.4,.2,.8,.2h0Z" style="fill: #fff;"/>
+      <path d="M597.4,578.6c.3,0,.7,0,.9,.2,.3,0,.4,.3,.6,.3,.2,.2,.3,.3,.3,.6,0,.3,0,.4,0,.8v3.8h-.8v-4.1c0-.2,0-.3-.2-.4,0,0-.2-.2-.3-.3s-.3,0-.5,0h-.5c-.2,0-.3,0-.5,.2s-.3,.2-.4,.3-.3,.3-.3,.6v3.7h-.8v-7.8h.8v3c0-.2,.2-.3,.3-.4s.3-.2,.4-.3,.3,0,.5-.2,.3,0,.5,0h-.2Z" style="fill: #fff;"/>
+      <path d="M542.6,590.2h-2v6.3h-.9v-6.3h-2v-.8h5.1v.8h0Z" style="fill: #fff;"/>
+      <path d="M547.7,593.1v.6l-3.7,.3c0,.3,0,.6,0,.8,0,.3,.2,.4,.3,.5,.2,.2,.3,.3,.5,.3,.3,0,.5,0,.8,0s.6,0,.9,0,.6-.2,.8-.3v.8s-.2,0-.3,0c-.2,0-.3,0-.4,0h-1.1c-.4,0-.8,0-1.1-.2-.3,0-.6-.3-.8-.5-.3-.3-.4-.5-.5-.8s-.2-.8-.2-1.4,0-1,.2-1.4c0-.3,.3-.7,.5-.8,.3-.3,.5-.3,.8-.5,.3,0,.7-.2,1-.2s.8,0,1.1,.2,.5,.3,.7,.5c.2,.3,.3,.5,.3,.8v.8l.2,.3Zm-.8,0v-.6c0-.2,0-.3-.2-.5s-.3-.3-.4-.3c-.2,0-.4-.2-.7-.2s-.6,0-.8,0c-.2,0-.3,.2-.5,.3,0,.2-.2,.3-.3,.6v.8l2.9-.3h0Z" style="fill: #fff;"/>
+      <path d="M555.3,590.8c.3,0,.6,0,.8,.2,.3,0,.4,.3,.6,.3,.2,.2,.3,.3,.3,.6,0,.3,0,.4,0,.8v3.8h-.8v-3.5c0-.4,0-.8-.3-1-.2-.3-.4-.3-.8-.3h-.4c0,0-.3,0-.4,.2,0,0-.3,.2-.3,.3,0,0-.2,.3-.3,.5h0v3.9h-.8v-3.5c0-.4,0-.8-.2-1s-.4-.3-.8-.3h-.5c-.2,0-.3,0-.4,.2,0,0-.3,.2-.3,.3,0,.2-.2,.3-.3,.5v3.8h-.8v-5.5h.8v.8c.2-.3,.4-.5,.7-.7,.3,0,.6-.2,.9-.2s.8,0,1,.3c.3,.2,.4,.3,.6,.7,0-.2,.2-.3,.3-.4,0,0,.3-.2,.4-.3,.2,0,.3,0,.5-.2s.3,0,.5,0v-.2Z" style="fill: #fff;"/>
+      <path d="M561.8,590.8c.4,0,.8,0,1.1,.2s.5,.3,.7,.6,.3,.6,.3,.9c0,.3,0,.8,0,1.2s0,.8,0,1.1c0,.3-.2,.7-.3,.9s-.4,.5-.7,.6c-.3,.2-.7,.3-1.1,.3s-.9,0-1.2-.3c-.3-.2-.4-.4-.6-.8v3h-.8v-7.5h.8v1c0-.3,.3-.6,.6-.8s.7-.3,1.2-.3h0Zm0,4.9c.3,0,.6,0,.8-.2s.3-.3,.4-.5c0-.2,.2-.4,.2-.7v-1.6c0-.3,0-.5-.2-.7,0-.2-.3-.3-.4-.4s-.4-.2-.8-.2-.6,0-.8,.2-.4,.3-.5,.4c-.2,.2-.3,.4-.3,.7v1.7c0,.3,.2,.5,.3,.7,.2,.2,.3,.3,.5,.4,.3,0,.5,.2,.8,.2Z" style="fill: #fff;"/>
+      <path d="M570.2,593.1v.6l-3.7,.3c0,.3,0,.6,0,.8,0,.3,.2,.4,.3,.5,.2,.2,.3,.3,.5,.3,.3,0,.5,0,.8,0s.6,0,.9,0,.6-.2,.8-.3v.8s-.2,0-.3,0c-.2,0-.3,0-.4,0h-1.1c-.4,0-.8,0-1.1-.2-.3,0-.6-.3-.8-.5-.3-.3-.4-.5-.5-.8s-.2-.8-.2-1.4,0-1,.2-1.4c0-.3,.3-.7,.5-.8,.3-.3,.5-.3,.8-.5,.3,0,.7-.2,1-.2s.8,0,1.1,.2,.5,.3,.7,.5c.2,.3,.3,.5,.3,.8v.8l.2,.3Zm-.8,0v-.6c0-.2,0-.3-.2-.5s-.3-.3-.4-.3c-.2,0-.4-.2-.7-.2s-.6,0-.8,0c-.2,0-.3,.2-.5,.3,0,.2-.2,.3-.3,.6v.8l2.9-.3h0Z" style="fill: #fff;"/>
+      <path d="M574.7,590.8v.8h-.7c-.2,0-.3,0-.5,.2-.2,0-.3,.3-.4,.3,0,.2-.3,.3-.3,.6v3.6h-.8v-5.5h.8v1c0-.3,.2-.4,.3-.6s.3-.3,.4-.3c.2,0,.3-.2,.5-.2h.6Z" style="fill: #fff;"/>
+      <path d="M577.9,590.8c.4,0,.8,0,1.1,.2,.3,0,.5,.2,.7,.3s.3,.3,.3,.5c0,.2,0,.4,0,.7v3.9h-.8l-.2-.8c0,.2-.2,.3-.3,.4s-.3,.3-.4,.3-.3,.2-.6,.2h-.6c-.7,0-1.1-.2-1.4-.4s-.4-.7-.4-1.2,0-.6,.2-.8c0-.3,.3-.4,.4-.5,.2-.2,.4-.3,.7-.3s.6,0,.9,0h1.7v-.8c0-.2,0-.3-.2-.3s-.3-.2-.4-.3h-1.3c-.2,0-.4,0-.6,0v-.8h1.2v-.2Zm-.7,5c.4,0,.8,0,1.2-.3s.6-.4,.7-.8v-.9h-2.2c-.2,0-.3,0-.4,.2s-.2,.2-.3,.3v.5c0,.3,0,.5,.3,.7s.4,.3,.8,.3h0Z" style="fill: #fff;"/>
+      <path d="M583.9,595.8h.6v.8h-1.4c-.2,0-.3-.2-.5-.3-.2-.2-.3-.3-.3-.5,0-.3,0-.5,0-.8v-3.1h-.8v-.8h.8v-1.3h.8v1.3h1.4v.8h-1.4v3.6c0,0,0,.3,0,.3s.2,.2,.3,.2h.5Z" style="fill: #fff;"/>
+      <path d="M590.2,590.9v5.5h-.8v-.8l-.4,.4c0,0-.3,.2-.4,.3-.2,0-.3,0-.5,.2h-.5c-.3,0-.7,0-.9-.2-.3,0-.4-.2-.6-.3s-.3-.3-.3-.6,0-.4,0-.8v-3.8h.8v4.1c0,.2,0,.3,.2,.4s.2,.2,.3,.3,.3,0,.5,0h.5c.2,0,.3,0,.4-.2s.3-.2,.3-.3c0-.2,.2-.3,.3-.6v-3.7h1.1Z" style="fill: #fff;"/>
+      <path d="M595,590.8v.8h-.7c-.2,0-.3,0-.5,.2-.2,0-.3,.3-.4,.3,0,.2-.3,.3-.3,.6v3.6h-.8v-5.5h.8v1c0-.3,.2-.4,.3-.6s.3-.3,.4-.3c.2,0,.3-.2,.5-.2h.6Z" style="fill: #fff;"/>
+      <path d="M600.6,593.1v.6l-3.7,.3c0,.3,0,.6,0,.8,0,.3,.2,.4,.3,.5,.2,.2,.3,.3,.5,.3,.3,0,.5,0,.8,0s.6,0,.9,0,.6-.2,.8-.3v.8s-.2,0-.3,0c-.2,0-.3,0-.4,0h-1.1c-.4,0-.8,0-1.1-.2-.3,0-.6-.3-.8-.5-.3-.3-.4-.5-.5-.8s-.2-.8-.2-1.4,0-1,.2-1.4c0-.3,.3-.7,.5-.8,.3-.3,.5-.3,.8-.5,.3,0,.7-.2,1-.2s.8,0,1.1,.2,.5,.3,.7,.5c.2,.3,.3,.5,.3,.8v.8l.2,.3Zm-.8,0v-.6c0-.2,0-.3-.2-.5s-.3-.3-.4-.3c-.2,0-.4-.2-.7-.2s-.6,0-.8,0c-.2,0-.3,.2-.5,.3,0,.2-.2,.3-.3,.6v.8l2.9-.3h0Z" style="fill: #fff;"/>
+    </g>
+    <g>
+      <path d="M498,608.7h.6l1.7,6.3h0l2-6.3h.8l2.1,6.3h0l1.7-6.3h.6l-1.9,6.9h-.7l-2.1-6.3h0l-2.1,6.3h-.7l-1.9-6.9h0Z" style="fill: #fff;"/>
+      <path d="M508,608.7h.6l1.7,6.3h0l2-6.3h.8l2.1,6.3h0l1.7-6.3h.6l-1.9,6.9h-.7l-2.1-6.3h0l-2.1,6.3h-.7l-1.9-6.9h0Z" style="fill: #fff;"/>
+      <path d="M517.9,608.7h.6l1.7,6.3h0l2-6.3h.8l2.1,6.3h0l1.7-6.3h.6l-1.9,6.9h-.7l-2.1-6.3h0l-2.1,6.3h-.7l-1.9-6.9h0Z" style="fill: #fff;"/>
+      <path d="M528.5,615.7c-.2,0-.3,0-.4,0,0,0,0-.3,0-.5s0-.4,0-.4c0,0,.3,0,.4,0s.3,0,.4,0c0,0,0,.3,0,.4s0,.4,0,.5c0,0-.3,0-.4,0Z" style="fill: #fff;"/>
+      <path d="M536.7,608.7v6.4c0,.9-.3,1.7-.8,2.2-.5,.5-1.4,.8-2.4,.8s-.6,0-.8,0-.5,0-.7,0v-.6c.3,0,.5,0,.8,.2h.8c.9,0,1.5-.3,1.9-.7s.6-1.1,.6-1.9v-.9c-.2,.5-.4,.8-.8,1.1s-.9,.4-1.7,.4-.9,0-1.3-.3c-.3-.2-.6-.3-.8-.7-.2-.3-.3-.7-.4-1.1s-.2-.9-.2-1.5,0-1,.2-1.4c0-.4,.3-.8,.4-1.1,.2-.3,.5-.5,.8-.7s.8-.3,1.3-.3,.7,0,1,0c.3,0,.5,.2,.7,.3l.5,.5c.2,.2,.3,.4,.3,.7v-1.4h.5Zm-3,6.4c.5,0,.8,0,1.2-.3s.6-.3,.8-.6,.3-.6,.4-.9,0-.8,0-1.2,0-.8,0-1.2c0-.3-.2-.7-.4-.9s-.4-.5-.8-.6-.7-.3-1.2-.3-.8,0-1.1,.2-.5,.3-.7,.6-.3,.6-.3,.9c0,.3,0,.8,0,1.3s0,.9,0,1.3c0,.3,.2,.7,.3,.9s.4,.4,.7,.6,.7,.2,1.1,.2Z" style="fill: #fff;"/>
+      <path d="M544.2,611.4v.7l-4.9,.3c0,.5,0,.9,.2,1.3,0,.3,.3,.7,.4,.8,.2,.3,.4,.4,.8,.5s.7,.2,1.2,.2,.8,0,1.1,0c.4,0,.8-.2,1-.3v.6c0,0-.3,0-.4,.2-.2,0-.3,0-.5,.2-.2,0-.4,0-.6,0h-.7c-.5,0-1,0-1.4-.2-.4,0-.7-.3-.9-.6s-.4-.7-.5-1.1-.2-1-.2-1.7,0-1.3,.2-1.7,.3-.8,.5-1.1,.5-.5,.9-.6c.3,0,.8-.2,1.4-.2s1,0,1.4,.3c.3,.2,.6,.4,.8,.7s.3,.6,.3,.9,0,.7,0,1v-.2Zm-.6,.2v-1c0-.3-.2-.6-.3-.8-.2-.3-.3-.4-.6-.5s-.6-.2-1.1-.2-.8,0-1.1,.2c-.3,0-.5,.3-.7,.5s-.3,.5-.4,.8c0,.3,0,.8-.2,1.3l4.3-.3h0Z" style="fill: #fff;"/>
+      <path d="M551.3,611.4v.7l-4.9,.3c0,.5,0,.9,.2,1.3,0,.3,.3,.7,.4,.8,.2,.3,.4,.4,.8,.5s.7,.2,1.2,.2,.8,0,1.1,0c.4,0,.8-.2,1-.3v.6c0,0-.3,0-.4,.2-.2,0-.3,0-.5,.2-.2,0-.4,0-.6,0h-.7c-.5,0-1,0-1.4-.2-.4,0-.7-.3-.9-.6s-.4-.7-.5-1.1-.2-1-.2-1.7,0-1.3,.2-1.7,.3-.8,.5-1.1,.5-.5,.9-.6c.3,0,.8-.2,1.4-.2s1,0,1.4,.3c.3,.2,.6,.4,.8,.7s.3,.6,.3,.9,0,.7,0,1v-.2Zm-.6,.2v-1c0-.3-.2-.6-.3-.8-.2-.3-.3-.4-.6-.5s-.6-.2-1.1-.2-.8,0-1.1,.2c-.3,0-.5,.3-.7,.5s-.3,.5-.4,.8c0,.3,0,.8-.2,1.3l4.3-.3h0Z" style="fill: #fff;"/>
+      <path d="M558.3,611.4v.7l-4.9,.3c0,.5,0,.9,.2,1.3,0,.3,.3,.7,.4,.8,.2,.3,.4,.4,.8,.5s.7,.2,1.2,.2,.8,0,1.1,0c.4,0,.8-.2,1-.3v.6c0,0-.3,0-.4,.2-.2,0-.3,0-.5,.2-.2,0-.4,0-.6,0h-.7c-.5,0-1,0-1.4-.2-.4,0-.7-.3-.9-.6s-.4-.7-.5-1.1-.2-1-.2-1.7,0-1.3,.2-1.7,.3-.8,.5-1.1,.5-.5,.9-.6c.3,0,.8-.2,1.4-.2s1,0,1.4,.3c.3,.2,.6,.4,.8,.7s.3,.6,.3,.9,0,.7,0,1v-.2Zm-.6,.2v-1c0-.3-.2-.6-.3-.8-.2-.3-.3-.4-.6-.5s-.6-.2-1.1-.2-.8,0-1.1,.2c-.3,0-.5,.3-.7,.5s-.3,.5-.4,.8c0,.3,0,.8-.2,1.3l4.3-.3h0Z" style="fill: #fff;"/>
+      <path d="M562.1,615.1h.9v.5h-1.7c-.3,0-.4-.2-.5-.3-.2-.2-.3-.3-.3-.7s0-.7,0-1.1v-4.3h-1.1v-.5h1.1v-1.6h.6v1.6h1.9v.5h-1.9v5.1c0,.2,0,.3,.2,.5s.2,.2,.3,.3h.5Z" style="fill: #fff;"/>
+      <path d="M569.3,611.4v.7l-4.9,.3c0,.5,0,.9,.2,1.3,0,.3,.3,.7,.4,.8,.2,.3,.4,.4,.8,.5s.7,.2,1.2,.2,.8,0,1.1,0c.4,0,.8-.2,1-.3v.6c0,0-.3,0-.4,.2-.2,0-.3,0-.5,.2-.2,0-.4,0-.6,0h-.7c-.5,0-1,0-1.4-.2-.4,0-.7-.3-.9-.6s-.4-.7-.5-1.1-.2-1-.2-1.7,0-1.3,.2-1.7,.3-.8,.5-1.1,.5-.5,.9-.6c.3,0,.8-.2,1.4-.2s1,0,1.4,.3c.3,.2,.6,.4,.8,.7s.3,.6,.3,.9,0,.7,0,1v-.2Zm-.6,.2v-1c0-.3-.2-.6-.3-.8-.2-.3-.3-.4-.6-.5s-.6-.2-1.1-.2-.8,0-1.1,.2c-.3,0-.5,.3-.7,.5s-.3,.5-.4,.8c0,.3,0,.8-.2,1.3l4.3-.3h0Z" style="fill: #fff;"/>
+      <path d="M573.8,615.7c-.5,0-.9,0-1.4-.2-.3,0-.7-.3-.9-.6s-.4-.7-.5-1.1-.2-1-.2-1.7,0-1.3,.2-1.7c0-.4,.3-.8,.5-1.1s.5-.5,.9-.6c.3,0,.8-.2,1.4-.2h1c.3,0,.6,0,.8,.2v.6c-.3,0-.5-.2-.8-.2h-.9c-.3,0-.8,0-1.1,.2-.3,0-.5,.3-.7,.5s-.3,.5-.4,.9c0,.4,0,.8,0,1.4s0,1,0,1.4c0,.4,.2,.7,.4,.9,.2,.3,.4,.4,.7,.5s.7,.2,1.1,.2,.7,0,1,0c.3,0,.6-.2,.8-.3v.6c-.2,0-.4,.2-.8,.3-.3,0-.7,0-1,0v-.2Z" style="fill: #fff;"/>
+      <path d="M580.2,608.5c.4,0,.8,0,1.1,.2,.3,0,.5,.3,.7,.4s.3,.4,.3,.7c0,.3,0,.6,0,.9v4.8h-.6v-5.4c0-.3-.2-.5-.3-.6-.2-.2-.3-.3-.5-.3s-.5,0-.8,0h-.7c-.3,0-.4,0-.7,.3s-.4,.3-.6,.5-.3,.5-.3,.8v4.8h-.6v-9.7h.6v4c0-.3,.2-.4,.3-.6s.3-.3,.6-.4,.4-.2,.7-.3,.5,0,.8,0h0Z" style="fill: #fff;"/>
+      <path d="M585.3,615.7c-.2,0-.3,0-.4,0,0,0,0-.3,0-.5s0-.4,0-.4c0,0,.3,0,.4,0s.3,0,.4,0c0,0,0,.3,0,.4s0,.4,0,.5c0,0-.3,0-.4,0Z" style="fill: #fff;"/>
+      <path d="M590.1,615.7c-.5,0-.9,0-1.4-.2-.3,0-.7-.3-.9-.6s-.4-.7-.5-1.1-.2-1-.2-1.7,0-1.3,.2-1.7c0-.4,.3-.8,.5-1.1s.5-.5,.9-.6c.3,0,.8-.2,1.4-.2h1c.3,0,.6,0,.8,.2v.6c-.3,0-.5-.2-.8-.2h-.9c-.3,0-.8,0-1.1,.2-.3,0-.5,.3-.7,.5s-.3,.5-.4,.9c0,.4,0,.8,0,1.4s0,1,0,1.4c0,.4,.2,.7,.4,.9,.2,.3,.4,.4,.7,.5s.7,.2,1.1,.2,.7,0,1,0c.3,0,.6-.2,.8-.3v.6c-.2,0-.4,.2-.8,.3-.3,0-.7,0-1,0v-.2Z" style="fill: #fff;"/>
+      <path d="M596.1,615.7c-.5,0-1,0-1.4-.2-.3,0-.7-.3-.9-.6s-.4-.7-.5-1.1-.2-1-.2-1.7,0-1.3,.2-1.7c0-.4,.3-.8,.5-1.1s.5-.5,.9-.6,.8-.2,1.4-.2,.9,0,1.4,.2c.3,0,.7,.3,.9,.6s.4,.7,.5,1.1,.2,1,.2,1.7,0,1.3-.2,1.7c0,.4-.3,.8-.5,1.1s-.6,.5-.9,.6c-.3,0-.8,.2-1.4,.2Zm0-.5c.4,0,.8,0,1.2-.2,.3,0,.5-.3,.8-.5,.2-.3,.3-.6,.4-.9s0-.8,0-1.4,0-1,0-1.4-.2-.7-.4-.9-.4-.4-.8-.5-.7-.2-1.1-.2-.8,0-1.1,.2c-.3,0-.5,.3-.8,.5-.2,.3-.3,.6-.3,.9s0,.8,0,1.4,0,1,0,1.4c0,.4,.2,.7,.3,.9s.4,.4,.8,.5,.7,.2,1.1,.2h0Z" style="fill: #fff;"/>
+      <path d="M608.1,608.5c.4,0,.8,0,1,.2,.3,0,.5,.3,.7,.4s.3,.4,.3,.7c0,.3,0,.6,0,.9v4.8h-.6v-5.4c0-.3,0-.5-.3-.6,0-.2-.3-.3-.5-.3-.2,0-.5,0-.8,0h-.7c-.3,0-.4,0-.6,.3-.2,0-.3,.3-.5,.5-.2,.3-.3,.5-.3,.8h0v4.8h-.6v-5.4c0-.3,0-.5-.3-.6,0-.2-.3-.3-.5-.3s-.5,0-.8,0h-.7c-.3,0-.4,0-.6,.3-.2,0-.3,.3-.5,.5-.2,.2-.3,.5-.3,.8v4.9h-.6v-6.9h.6v1.2c0-.3,.2-.4,.3-.6s.3-.3,.5-.4c.2,0,.4-.2,.6-.3s.5,0,.7,0c.6,0,1.1,0,1.4,.3,.3,.3,.5,.6,.6,1,0-.3,.2-.4,.3-.6s.3-.3,.5-.4,.4-.2,.7-.3,.5,0,.8,0v-.2Z" style="fill: #fff;"/>
+    </g>
+  </g>
+  <g>
+    <path d="M20.2,605.8c-.3,0-.5,0-.6,0h0c-.3,0-.5-.1-.8-.2l-1.4-.5c-.2-.1-.6-.3-1-.6l-.9-.8c-.8-.8-1.5-2-1.9-3.5-.4-1.3-.5-2.9-.5-4.8s.3-3.7,.9-5.1c.7-1.8,1.9-3.1,3.6-4.1,.5-.3,1.1-.5,2-.6,.8-.1,4.4-.2,10.6-.2v3.6h-8.3c-1.6,0-2.8,.7-3.5,2-.6,1-.8,2.4-.8,4.1v2.1c.1,.3,.1,.5,.2,.7h0c0,.4,0,.7,.1,.9,.2,1,.6,1.8,1.3,2.4,.7,.6,3,.9,7.2,.9v-4.8h-5.2v-3.6h9.1v12.1h-9.8Z" style="fill: #fff; fill-rule: evenodd;"/>
+    <path d="M40.7,605.8h-1.6c0,0-.6-.1-.6-.1-.1,0-.3,0-.5,0-.1,0-.2,0-.2,0-.1,0-.2,0-.2,0-1.8-.5-3.2-1.7-4.2-3.6-.4-.8-.7-1.6-.9-2.5-.2-.9-.3-1.8-.3-2.8,0-1.9,.1-3.5,.4-4.7,.3-1.3,.7-2.5,1.4-3.4,.8-1.1,1.7-1.9,2.8-2.3,.5-.2,1.1-.4,2-.5,.8-.1,3.6-.2,8.6-.2v3.6h-6.4c-2.9,0-4.4,1.6-4.4,4.8h10.8v3.6h-10.8c0,.8,0,1.5,.2,2,0,.3,.1,.6,.2,.9,0,.2,.2,.4,.4,.7l.7,.7c.2,.2,.5,.3,.8,.5,.3,.1,.7,.2,1,.2h7.4v3.6h-6.5Z" style="fill: #fff; fill-rule: evenodd;"/>
+    <path d="M58.1,605.8h-1.6c0,0-.6-.1-.6-.1-.1,0-.3,0-.5,0-.1,0-.2,0-.2,0-.1,0-.2,0-.2,0-1.8-.5-3.2-1.7-4.2-3.6-.4-.8-.7-1.6-.9-2.5-.2-.9-.3-1.8-.3-2.8,0-1.9,.1-3.5,.4-4.7,.3-1.3,.7-2.5,1.4-3.4,.8-1.1,1.7-1.9,2.8-2.3,.5-.2,1.1-.4,2-.5,.8-.1,3.6-.2,8.6-.2v3.6h-6.4c-2.9,0-4.4,1.6-4.4,4.8h10.7v3.6h-10.7c0,.8,0,1.5,.2,2,0,.3,.1,.6,.2,.9,0,.2,.2,.4,.4,.7l.7,.7c.2,.2,.5,.3,.8,.5,.3,.1,.7,.2,1,.2h7.4v3.6h-6.5Z" style="fill: #fff; fill-rule: evenodd;"/>
+    <path d="M75.4,605.8h-1.6c0,0-.6-.1-.6-.1-.1,0-.3,0-.5,0-.1,0-.2,0-.2,0-.1,0-.2,0-.2,0-1.8-.5-3.2-1.7-4.2-3.6-.4-.8-.7-1.6-.9-2.5-.2-.9-.3-1.8-.3-2.8,0-1.9,.1-3.5,.4-4.7,.3-1.3,.7-2.5,1.4-3.4,.8-1.1,1.7-1.9,2.8-2.3,.5-.2,1.1-.4,2-.5,.8-.1,3.6-.2,8.6-.2v3.6h-6.4c-2.9,0-4.4,1.6-4.4,4.8h10.8v3.6h-10.8c0,.8,0,1.5,.2,2,0,.3,.1,.6,.2,.9,0,.2,.2,.4,.4,.7l.7,.7c.2,.2,.5,.3,.8,.5,.3,.1,.7,.2,1,.2h7.4v3.6h-6.5Z" style="fill: #fff; fill-rule: evenodd;"/>
+    <polygon points="93.4 589 93.4 605.8 89.4 605.8 89.4 589 83.5 589 83.5 585.4 99.4 585.4 99.4 589 93.4 589" style="fill: #fff; fill-rule: evenodd;"/>
+    <path d="M108.7,605.8h-1.6c0,0-.6-.1-.6-.1-.1,0-.3,0-.5,0-.1,0-.2,0-.2,0-.1,0-.2,0-.2,0-1.8-.5-3.2-1.7-4.2-3.6-.4-.8-.7-1.6-.9-2.5-.2-.9-.3-1.8-.3-2.8,0-1.9,.1-3.5,.4-4.7,.3-1.3,.7-2.5,1.4-3.4,.8-1.1,1.7-1.9,2.8-2.3,.5-.2,1.1-.4,2-.5,.8-.1,3.6-.2,8.6-.2v3.6h-6.4c-2.9,0-4.4,1.6-4.4,4.8h10.7v3.6h-10.7c0,.8,0,1.5,.2,2,0,.3,.1,.6,.2,.9,0,.2,.2,.4,.4,.7l.7,.7c.2,.2,.5,.3,.8,.5,.3,.1,.7,.2,1,.2h7.4v3.6h-6.5Z" style="fill: #fff; fill-rule: evenodd;"/>
+    <path d="M126.1,605.8h-1.6c0,0-.6-.1-.6-.1-.1,0-.3,0-.5,0-.1,0-.2,0-.2,0-.1,0-.2,0-.2,0-1.8-.5-3.2-1.7-4.2-3.6-.8-1.6-1.3-3.4-1.3-5.2s.1-3.5,.4-4.8c.3-1.3,.7-2.5,1.4-3.4,.8-1.1,1.7-1.9,2.8-2.3,.7-.2,1.3-.4,2-.5,.7-.1,3.6-.2,8.6-.2v3.5h-6.4c-1.2,0-2.2,.4-3,1.1-.6,.6-1,1.5-1.2,2.6-.2,1.2-.4,2.4-.4,3.6s.2,2.5,.5,3.5c.4,1.3,1.2,2.1,2.2,2.4h.4c0,.1,.5,.1,.5,.1h7.4v3.6h-6.5Z" style="fill: #fff; fill-rule: evenodd;"/>
+    <polygon points="146.5 605.8 146.5 597.2 139.4 597.2 139.4 605.8 135.5 605.8 135.5 585.4 139.4 585.4 139.4 593.6 146.5 593.6 146.5 585.4 150.4 585.4 150.4 605.8 146.5 605.8" style="fill: #fff; fill-rule: evenodd;"/>
+  </g>
+  <rect x="1.4" y="1.4" width="620.8" height="620.8" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="163.4" y1="595.2" x2="487.3" y2="595.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="568.2" x2="622.2" y2="568.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="541.2" x2="622.2" y2="541.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="514.2" x2="622.2" y2="514.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="487.3" x2="622.2" y2="487.3" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="460.3" x2="622.2" y2="460.3" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="433.3" x2="622.2" y2="433.3" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="406.3" x2="622.2" y2="406.3" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="379.3" x2="622.2" y2="379.3" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="352.3" x2="622.2" y2="352.3" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="325.3" x2="622.2" y2="325.3" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="298.3" x2="622.2" y2="298.3" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="271.3" x2="622.2" y2="271.3" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="244.3" x2="622.2" y2="244.3" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="217.3" x2="622.2" y2="217.3" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="190.4" x2="622.2" y2="190.4" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="163.4" x2="622.2" y2="163.4" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="136.4" x2="622.2" y2="136.4" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="109.4" x2="622.2" y2="109.4" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="82.4" x2="622.2" y2="82.4" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="55.4" x2="622.2" y2="55.4" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="1.4" y1="28.4" x2="622.2" y2="28.4" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="595.2" y1="1.4" x2="595.2" y2="568.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="568.2" y1="1.4" x2="568.2" y2="568.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="541.2" y1="1.4" x2="541.2" y2="568.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="514.2" y1="1.4" x2="514.2" y2="568.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="487.3" y1="1.4" x2="487.3" y2="622.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="460.3" y1="1.4" x2="460.3" y2="622.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="433.3" y1="1.4" x2="433.3" y2="622.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="406.3" y1="1.4" x2="406.3" y2="622.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="379.3" y1="1.4" x2="379.3" y2="622.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="352.3" y1="1.4" x2="352.3" y2="622.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="325.3" y1="1.4" x2="325.3" y2="622.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="298.3" y1="1.4" x2="298.3" y2="622.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="271.3" y1="1.4" x2="271.3" y2="622.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="244.3" y1="1.4" x2="244.3" y2="622.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="217.3" y1="1.4" x2="217.3" y2="622.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="190.4" y1="1.4" x2="190.4" y2="622.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="163.4" y1="1.4" x2="163.4" y2="622.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="136.4" y1="1.4" x2="136.4" y2="568.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="109.4" y1="1.4" x2="109.4" y2="568.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="82.4" y1="1.4" x2="82.4" y2="568.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="55.4" y1="1.4" x2="55.4" y2="568.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+  <line x1="28.4" y1="1.4" x2="28.4" y2="568.2" style="fill: none; stroke: #fff; stroke-miterlimit: 10; stroke-width: .8px;"/>
+</svg>