QoL: Keyboard shortcuts updates & fixes (#3457 )

* Bring back the shortcut to zoom in & out * Update keyboard shortcut info * Update keyboard shortcut info * Different handling of shortcut 'T' for emboss text Cherry-picked from prusa3d/PrusaSlicer@58e3143ad8 Co-authored-by: Filip Sykala - NTB T15p <Filip.Sykala@prusa3d.cz> --------- Co-authored-by: Filip Sykala - NTB T15p <Filip.Sykala@prusa3d.cz> (cherry picked from commit 002208fc8c)
Feature/update deps (#3445 )
2026-05-17 10:32:20 +00:00 · 2024-01-04 19:36:04 +08:00 · 2024-01-04 19:36:04 +08:00 · 2024-01-02 20:48:25 +08:00 · 2024-01-02 20:41:41 +08:00 · 2024-01-02 16:26:01 +08:00
160 changed files with 19133 additions and 5285 deletions
--- a/.github/workflows/build_deps.yml
+++ b/.github/workflows/build_deps.yml
@@ -70,11 +70,14 @@ jobs:
        if: inputs.os == 'macos-12'
        working-directory: ${{ github.workspace }}
        run: |
-            brew install cmake git gettext automake
+            brew install cmake git gettext automake texinfo
            brew list
            mkdir -p ${{ github.workspace }}/deps/build_${{ inputs.arch }}
            mkdir -p ${{ github.workspace }}/deps/build_${{ inputs.arch }}/OrcaSlicer_dep_${{ inputs.arch }}
-            ./build_release_macos.sh -dp -a ${{ inputs.arch }}
+            brew uninstall --ignore-dependencies zstd
+            ./build_release_macos.sh -dp -a ${{ inputs.arch }} -t 10.15
+            brew install zstd
+

      - name: Build on Ubuntu
        if: inputs.os == 'ubuntu-20.04'
@@ -85,7 +88,7 @@ jobs:
            libwayland-dev libxkbcommon-dev wayland-protocols extra-cmake-modules pkgconf \
            libglu1-mesa-dev libcairo2-dev libgtk-3-dev libsoup2.4-dev libwebkit2gtk-4.0-dev \
            libgstreamer1.0-dev libgstreamer-plugins-good1.0-dev libgstreamer-plugins-base1.0-dev \
-            gstreamer1.0-plugins-bad libosmesa6-dev wget sudo autoconf curl libunwind-dev
+            gstreamer1.0-plugins-bad libosmesa6-dev wget sudo autoconf curl libunwind-dev texinfo
            mkdir -p ${{ github.workspace }}/deps/build
            mkdir -p ${{ github.workspace }}/deps/build/destdir
            sudo ./BuildLinux.sh -ur
--- a/.github/workflows/build_orca.yml
+++ b/.github/workflows/build_orca.yml
@@ -76,15 +76,17 @@ jobs:
      - name: Install tools mac
        if: inputs.os == 'macos-12'
        run: |
-          brew install cmake git gettext zstd tree
+          brew install cmake git gettext tree
+          brew list
          mkdir -p ${{ github.workspace }}/deps/build_${{inputs.arch}}
          mkdir -p ${{ github.workspace }}/deps/build_${{inputs.arch}}/OrcaSlicer_dep_${{inputs.arch}}
+          tree ${{ github.workspace }}/deps/build_${{inputs.arch}}/OrcaSlicer_dep_${{inputs.arch}}

      - name: Build slicer mac
        if: inputs.os == 'macos-12'
        working-directory: ${{ github.workspace }}
        run: |
-          ./build_release_macos.sh -s -n -a ${{inputs.arch}}
+          ./build_release_macos.sh -s -n -a ${{inputs.arch}} -t 10.15

 # Thanks to RaySajuuk, it's working now
      - name: Sign app and notary
--- a/.gitignore
+++ b/.gitignore
@@ -30,3 +30,4 @@ src/OrcaSlicer-doc/
 **/process_full/
 **/machine_full/
 **/filament_full/
+/deps/DL_CACHE/
--- a/BuildLinux.sh
+++ b/BuildLinux.sh
@@ -78,7 +78,7 @@ then
 fi

 # Addtional Dev packages for OrcaSlicer
-export REQUIRED_DEV_PACKAGES="libmspack-dev libgstreamerd-3-dev libsecret-1-dev libwebkit2gtk-4.0-dev libosmesa6-dev libssl-dev libcurl4-openssl-dev eglexternalplatform-dev libudev-dev libdbus-1-dev extra-cmake-modules"
+export REQUIRED_DEV_PACKAGES="libmspack-dev libgstreamerd-3-dev libsecret-1-dev libwebkit2gtk-4.0-dev libosmesa6-dev libssl-dev libcurl4-openssl-dev eglexternalplatform-dev libudev-dev libdbus-1-dev extra-cmake-modules texinfo"
 # libwebkit2gtk-4.1-dev ??
 export DEV_PACKAGES_COUNT=$(echo ${REQUIRED_DEV_PACKAGES} | wc -w)
 if [ $(dpkg --get-selections | grep -E "$(echo ${REQUIRED_DEV_PACKAGES} | tr ' ' '|')" | wc -l) -lt ${DEV_PACKAGES_COUNT} ]; then
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -1,4 +1,13 @@
 cmake_minimum_required(VERSION 3.13)
+
+if (APPLE)
+    # if CMAKE_OSX_DEPLOYMENT_TARGET is not set, set it to 11.3
+    if (NOT CMAKE_OSX_DEPLOYMENT_TARGET)
+        set(CMAKE_OSX_DEPLOYMENT_TARGET "11.3" CACHE STRING "Minimum OS X deployment version" FORCE)
+    endif ()
+    message(STATUS "CMAKE_OSX_DEPLOYMENT_TARGET: ${CMAKE_OSX_DEPLOYMENT_TARGET}")
+endif ()
+
 project(OrcaSlicer)

 include("version.inc")
@@ -52,9 +61,9 @@ if (APPLE)
    if (CMAKE_MACOSX_BUNDLE)
        set(CMAKE_INSTALL_RPATH @executable_path/../Frameworks)
    endif()
-    set(CMAKE_OSX_DEPLOYMENT_TARGET "11.3" CACHE STRING "Minimum OS X deployment version" FORCE)
    SET(CMAKE_XCODE_ATTRIBUTE_PRODUCT_BUNDLE_IDENTIFIER "com.softfever3d.orca-slicer")

+    message(STATUS "Orca: IS_CROSS_COMPILE: ${IS_CROSS_COMPILE}")
 endif ()

 # Proposal for C++ unit tests and sandboxes
@@ -306,7 +315,7 @@ if(WIN32)
    add_definitions(-D_USE_MATH_DEFINES -D_WIN32 -D_CRT_SECURE_NO_WARNINGS -D_SCL_SECURE_NO_WARNINGS)
    if(MSVC)
        # BOOST_ALL_NO_LIB: Avoid the automatic linking of Boost libraries on Windows. Rather rely on explicit linking.
-        add_definitions(-DBOOST_ALL_NO_LIB -DBOOST_USE_WINAPI_VERSION=0x601 -DBOOST_SYSTEM_USE_UTF8 )
+        add_definitions(-DBOOST_ALL_NO_LIB -DBOOST_USE_WINAPI_VERSION=0x602 -DBOOST_SYSTEM_USE_UTF8 )
        # Force the source code encoding to UTF-8. See OrcaSlicer GH pull request #5583
        add_compile_options("$<$<C_COMPILER_ID:MSVC>:/utf-8>")
        add_compile_options("$<$<CXX_COMPILER_ID:MSVC>:/utf-8>")
@@ -436,11 +445,8 @@ find_package(TBB REQUIRED)
 # add_definitions(-DTBB_USE_CAPTURED_EXCEPTION=0)

 find_package(OpenSSL REQUIRED)
-if (APPLE)
-find_package(CURL CONFIG REQUIRED)
-else()
 find_package(CURL REQUIRED)
-endif()
+

 add_library(libcurl INTERFACE)
 target_link_libraries(libcurl INTERFACE CURL::libcurl)
@@ -509,6 +515,8 @@ find_package(PNG REQUIRED)
 set(OpenGL_GL_PREFERENCE "LEGACY")
 find_package(OpenGL REQUIRED)

+set(GLEW_ROOT "${CMAKE_PREFIX_PATH}")
+message("GLEW_ROOT: ${GLEW_ROOT}")
 # Find glew or use bundled version
 if (SLIC3R_STATIC AND NOT SLIC3R_STATIC_EXCLUDE_GLEW)
    set(GLEW_USE_STATIC_LIBS ON)
@@ -786,4 +794,4 @@ set (CPACK_RESOURCE_FILE_LICENSE ${CMAKE_SOURCE_DIR}/LICENSE.txt) # must also in

 set(CPACK_WIX_UPGRADE_GUID "058245e8-20e0-4a95-9ab7-1acfe17ad511")
 set(CPACK_GENERATOR NSIS)
-include(CPack)
+include(CPack)
--- a/README.md
+++ b/README.md
@@ -22,15 +22,20 @@ Orca Slicer's logo is designed by community member Justin Levine(@freejstnalxndr

 # How to install
 **Windows**: 
-1.  Install and run  
+1.  Download the installer for your preferred version from the [releases page](https://github.com/SoftFever/OrcaSlicer/releases).
+    - *For convenience there is also a portable build available.*
    - *If you have troubles to run the build, you might need to install following runtimes:*
-      - [MicrosoftEdgeWebView2RuntimeInstallerX64](https://github.com/SoftFever/BambuStudio-SoftFever/releases/download/v1.0.10-sf2/MicrosoftEdgeWebView2RuntimeInstallerX64.exe)  
-      - [vcredist2019_x64](https://github.com/SoftFever/BambuStudio-SoftFever/releases/download/v1.0.10-sf2/vcredist2019_x64.exe)  
+      - [MicrosoftEdgeWebView2RuntimeInstallerX64](https://github.com/SoftFever/BambuStudio-SoftFever/releases/download/v1.0.10-sf2/MicrosoftEdgeWebView2RuntimeInstallerX64.exe)
+          - [Details of this runtime](https://aka.ms/webview2)
+          - [Alternative Download Link Hosted by Microsoft](https://go.microsoft.com/fwlink/p/?LinkId=2124703)
+      - [vcredist2019_x64](https://github.com/SoftFever/BambuStudio-SoftFever/releases/download/v1.0.10-sf2/vcredist2019_x64.exe)
+          -  [Alternative Download Link Hosted by Microsoft](https://aka.ms/vs/17/release/vc_redist.x64.exe)
+          -  This file may already be available on your computer if you've installed visual studio.  Check the following location: `%VCINSTALLDIR%Redist\MSVC\v142`

 **Mac**:
 1. Download the DMG for your computer: `arm64` version for Apple Silicon and `x86_64` for Intel CPU.  
 2. Drag OrcaSlicer.app to Application folder. 
-3. *If you want to run a build from a PR, you also need following instructions bellow*  
+3. *If you want to run a build from a PR, you also need following instructions below*  
    <details quarantine>
    - Option 1 (You only need to do this once. After that the app can be opened normally.):
      - Step 1: Hold _cmd_ and right click the app, from the context menu choose **Open**.
@@ -51,16 +56,21 @@ Orca Slicer's logo is designed by community member Justin Levine(@freejstnalxndr
 **Linux(Ubuntu)**:
 1. If you run into trouble to execute it, try this command in terminal:  
    `chmod +x /path_to_appimage/OrcaSlicer_ubu64.AppImage`
+    
 # How to compile
 - Windows 64-bit  
  - Tools needed: Visual Studio 2019, Cmake, git, Strawberry Perl.
+      - You will require cmake version 3.14 or later, which is available [on their website](https://cmake.org/download/).
+      - Strawberry Perl is [available on their github repository](https://github.com/StrawberryPerl/Perl-Dist-Strawberry/releases/).
  - Run `build_release.bat` in `x64 Native Tools Command Prompt for VS 2019`

 - Mac 64-bit  
-  - Tools needed: Xcode, Cmake, git, gettext, libtool, automake, autoconf
+  - Tools needed: Xcode, Cmake, git, gettext, libtool, automake, autoconf, texinfo
+      - You can install most of them by running `brew install cmake gettext libtool automake autoconf texinfo`
  - run `build_release_macos.sh`

- Ubuntu  
+- Ubuntu 
+  - Dependencies **Will be auto installed with the shell script**: `libmspack-dev libgstreamerd-3-dev libsecret-1-dev libwebkit2gtk-4.0-dev libosmesa6-dev libssl-dev libcurl4-openssl-dev eglexternalplatform-dev libudev-dev libdbus-1-dev extra-cmake-modules libgtk2.0-dev libglew-dev libudev-dev libdbus-1-dev cmake git texinfo`
  - run 'sudo ./BuildLinux.sh -u'
  - run './BuildLinux.sh -dsir'

--- a/build_release_macos.sh
+++ b/build_release_macos.sh
@@ -1,6 +1,6 @@
 #!/bin/sh

-while getopts ":a:sdphn" opt; do
+while getopts ":a:sdpt:hn" opt; do
  case ${opt} in
    d )
        export BUILD_TARGET="deps"
@@ -17,11 +17,15 @@ while getopts ":a:sdphn" opt; do
    n )
        export NIGHTLY_BUILD="1"
        ;;
+    t )
+        export OSX_DEPLOYMENT_TARGET="$OPTARG"
+        ;;
    h ) echo "Usage: ./build_release_macos.sh [-d]"
        echo "   -d: Build deps only"
        echo "   -a: Set ARCHITECTURE (arm64 or x86_64)"
        echo "   -s: Build slicer only"
        echo "   -n: Nightly build"
+        echo "   -t: Specify minimum version of the target platform, default is 11.3"
        exit 0
        ;;
  esac
@@ -34,19 +38,20 @@ fi

 echo "Arch: $ARCH"
 echo "BUILD_TARGET: $BUILD_TARGET"
+echo "OSX_DEPLOYMENT_TARGET: $OSX_DEPLOYMENT_TARGET"
+# if which -s brew; then
+# 	brew --prefix libiconv
+# 	brew --prefix zstd
+# 	export LIBRARY_PATH=$LIBRARY_PATH:$(brew --prefix zstd)/lib/
+# elif which -s port; then
+# 	port install libiconv
+# 	port install zstd
+# 	export LIBRARY_PATH=$LIBRARY_PATH:/opt/local/lib
+# else
+# 	echo "Need either brew or macports to successfully build deps"
+# 	exit 1
+# fi

-if which -s brew; then
-	brew --prefix libiconv
-	brew --prefix zstd
-	export LIBRARY_PATH=$LIBRARY_PATH:$(brew --prefix zstd)/lib/
-elif which -s port; then
-	port install libiconv
-	port install zstd
-	export LIBRARY_PATH=$LIBRARY_PATH:/opt/local/lib
-else
-	echo "Need either brew or macports to successfully build deps"
-	exit 1
-fi

 WD="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
 cd $WD/deps
@@ -57,8 +62,8 @@ mkdir -p $DEPS
 if [ "slicer." != $BUILD_TARGET. ]; 
 then
    echo "building deps..."
-    echo "cmake ../ -DDESTDIR=$DEPS -DOPENSSL_ARCH=darwin64-${ARCH}-cc -DCMAKE_BUILD_TYPE=Release -DCMAKE_OSX_ARCHITECTURES:STRING=${ARCH}"
-    cmake ../ -DDESTDIR="$DEPS" -DOPENSSL_ARCH="darwin64-${ARCH}-cc" -DCMAKE_BUILD_TYPE=Release -DCMAKE_OSX_ARCHITECTURES:STRING=${ARCH}
+    echo "cmake ../ -DDESTDIR=$DEPS -DOPENSSL_ARCH=darwin64-${ARCH}-cc -DCMAKE_BUILD_TYPE=Release -DCMAKE_OSX_ARCHITECTURES:STRING=${ARCH} -DCMAKE_OSX_DEPLOYMENT_TARGET=${OSX_DEPLOYMENT_TARGET}"
+    cmake ../ -DDESTDIR="$DEPS" -DOPENSSL_ARCH="darwin64-${ARCH}-cc" -DCMAKE_BUILD_TYPE=Release -DCMAKE_OSX_ARCHITECTURES:STRING=${ARCH} -DCMAKE_OSX_DEPLOYMENT_TARGET=${OSX_DEPLOYMENT_TARGET}
    cmake --build . --config Release --target deps 
    if [ "1." == "$PACK_DEPS". ];
    then
@@ -76,7 +81,7 @@ cd $WD
 mkdir -p build_$ARCH
 cd build_$ARCH
 echo "building slicer..."
-cmake .. -GXcode -DBBL_RELEASE_TO_PUBLIC=1 -DCMAKE_PREFIX_PATH="$DEPS/usr/local" -DCMAKE_INSTALL_PREFIX="$PWD/OrcaSlicer" -DCMAKE_BUILD_TYPE=Release -DCMAKE_MACOSX_RPATH=ON -DCMAKE_INSTALL_RPATH="$DEPS/usr/local" -DCMAKE_MACOSX_BUNDLE=ON -DCMAKE_OSX_ARCHITECTURES=${ARCH}
+cmake .. -GXcode -DBBL_RELEASE_TO_PUBLIC=1 -DCMAKE_PREFIX_PATH="$DEPS/usr/local" -DCMAKE_INSTALL_PREFIX="$PWD/OrcaSlicer" -DCMAKE_BUILD_TYPE=Release -DCMAKE_MACOSX_RPATH=ON -DCMAKE_INSTALL_RPATH="$DEPS/usr/local" -DCMAKE_MACOSX_BUNDLE=ON -DCMAKE_OSX_ARCHITECTURES=${ARCH} -DCMAKE_OSX_DEPLOYMENT_TARGET=${OSX_DEPLOYMENT_TARGET}
 cmake --build . --config Release --target ALL_BUILD 
 cd ..
 ./run_gettext.sh
--- a/cmake/modules/FindGLEW.cmake
+++ b/cmake/modules/FindGLEW.cmake
@@ -64,16 +64,6 @@ This module defines the following variables:

 include(FindPackageHandleStandardArgs)

-find_package(GLEW CONFIG QUIET)
-
-if(GLEW_FOUND)
-  find_package_handle_standard_args(GLEW DEFAULT_MSG GLEW_CONFIG)
-  return()
-endif()
-
-if(GLEW_VERBOSE)
-  message(STATUS "FindGLEW: did not find GLEW CMake config file. Searching for libraries.")
-endif()

 if(APPLE)
  find_package(OpenGL QUIET)
--- a/deps/Boost/Boost.cmake
+++ b/deps/Boost/Boost.cmake
@@ -1,203 +1,25 @@
-include(ExternalProject)

-# Use boost 1.78 for Windows, to support VS2022
-if (WIN32)
-	set(_boost_url "https://boostorg.jfrog.io/artifactory/main/release/1.78.0/source/boost_1_78_0.tar.gz")
-	set(_boost_hash 94CED8B72956591C4775AE2207A9763D3600B30D9D7446562C552F0A14A63BE7)
-    set(_bootstrap_cmd bootstrap.bat)
-    set(_build_cmd  b2.exe)
-else()
-	set(_boost_url "https://boostorg.jfrog.io/artifactory/main/release/1.75.0/source/boost_1_75_0.tar.gz")
-	set(_boost_hash AEB26F80E80945E82EE93E5939BAEBDCA47B9DEE80A07D3144BE1E1A6A66DD6A)
-    set(_bootstrap_cmd ./bootstrap.sh)
-    set(_build_cmd ./b2)
-endif()
-
-set(_patch_command ${CMAKE_COMMAND} -E copy ${CMAKE_CURRENT_LIST_DIR}/common.jam ./tools/build/src/tools/common.jam)
-
-if (CMAKE_CXX_COMPILER_ID STREQUAL "GNU")
-    configure_file(${CMAKE_CURRENT_LIST_DIR}/user-config.jam boost-user-config.jam)
-    set(_boost_toolset gcc)
-    set(_patch_command ${_patch_command} && ${CMAKE_COMMAND} -E copy ${CMAKE_CURRENT_BINARY_DIR}/boost-user-config.jam ./tools/build/src/tools/user-config.jam)
-elseif (CMAKE_CXX_COMPILER_ID STREQUAL "MSVC")
-    # https://cmake.org/cmake/help/latest/variable/MSVC_VERSION.html
-    if (MSVC_VERSION EQUAL 1800)
-    # 1800      = VS 12.0 (v120 toolset)
-        set(_boost_toolset "msvc-12.0")
-    elseif (MSVC_VERSION EQUAL 1900)
-    # 1900      = VS 14.0 (v140 toolset)
-        set(_boost_toolset "msvc-14.0")
-    elseif (MSVC_VERSION LESS 1920)
-    # 1910-1919 = VS 15.0 (v141 toolset)
-        set(_boost_toolset "msvc-14.1")
-    elseif (MSVC_VERSION LESS 1930)
-    # 1920-1929 = VS 16.0 (v142 toolset)
-        set(_boost_toolset "msvc-14.2")
-    elseif (MSVC_VERSION LESS 1940)
-    # 1930-1939 = VS 17.0 (v143 toolset)
-        set(_boost_toolset "msvc-14.3")
-    else ()
-        message(FATAL_ERROR "Unsupported MSVC version")
+set(_context_abi_line "")
+set(_context_arch_line "")
+if (APPLE AND CMAKE_OSX_ARCHITECTURES)
+    if (CMAKE_OSX_ARCHITECTURES MATCHES "x86")
+        set(_context_abi_line "-DBOOST_CONTEXT_ABI:STRING=sysv")
+    elseif (CMAKE_OSX_ARCHITECTURES MATCHES "arm")
+        set (_context_abi_line "-DBOOST_CONTEXT_ABI:STRING=aapcs")
    endif ()
-elseif (CMAKE_CXX_COMPILER_ID STREQUAL "Clang")
-    if (WIN32)
-        set(_boost_toolset "clang-win")
-    else()
-        set(_boost_toolset "clang")
-    endif()
-elseif (CMAKE_CXX_COMPILER_ID STREQUAL "Intel")
-    set(_boost_toolset "intel")
-elseif (CMAKE_CXX_COMPILER_ID STREQUAL "AppleClang")
-    set(_boost_toolset "clang")
-endif()
-
-message(STATUS "Deduced boost toolset: ${_boost_toolset} based on ${CMAKE_CXX_COMPILER_ID} compiler")
-
-set(_libs "")
-foreach(_comp ${DEP_Boost_COMPONENTS})
-    list(APPEND _libs "--with-${_comp}")
-endforeach()
-
-if (BUILD_SHARED_LIBS)
-    set(_link shared)
-else()
-    set(_link static)
-endif()
-
-set(_bits "")
-if ("${CMAKE_SIZEOF_VOID_P}" STREQUAL "8")
-    set(_bits 64)
-elseif ("${CMAKE_SIZEOF_VOID_P}" STREQUAL "4")
-    set(_bits 32)
+    set(_context_arch_line "-DBOOST_CONTEXT_ARCHITECTURE:STRING=${CMAKE_OSX_ARCHITECTURES}")
 endif ()

-include(ProcessorCount)
-ProcessorCount(NPROC)
-file(TO_NATIVE_PATH ${DESTDIR}/usr/local/ _prefix)
-
-
-set(_boost_variants "")
-if(CMAKE_BUILD_TYPE)
-    list(APPEND CMAKE_CONFIGURATION_TYPES ${CMAKE_BUILD_TYPE})
-    list(REMOVE_DUPLICATES CMAKE_CONFIGURATION_TYPES)
-endif()
-list(FIND CMAKE_CONFIGURATION_TYPES "Release" _cfg_rel)
-list(FIND CMAKE_CONFIGURATION_TYPES "RelWithDebInfo" _cfg_relwdeb)
-list(FIND CMAKE_CONFIGURATION_TYPES "MinSizeRel" _cfg_minsizerel)
-list(FIND CMAKE_CONFIGURATION_TYPES "Debug" _cfg_deb)
-
-if (_cfg_rel GREATER -1 OR _cfg_relwdeb GREATER -1 OR _cfg_minsizerel GREATER -1)
-    list(APPEND _boost_variants release)
-endif()
-
-if (MSVC AND ${DEP_DEBUG} )
-    list(APPEND _boost_variants debug)
-endif()
-
-if (NOT _boost_variants)
-    set(_boost_variants release)
-endif()
-
-if (IS_CROSS_COMPILE AND APPLE)
-    if (${CMAKE_OSX_ARCHITECTURES} MATCHES "arm")
-        message(STATUS "Compiling Boost for arm64.")
-        message(STATUS "Compiling Boost with toolset ${_boost_toolset}.")
-        message(STATUS "Compiling Boost with libs ${_libs}.")
-        message(STATUS "Compiling Boost with variant ${_boost_variants}.")
-        message(STATUS "Compiling Boost with _bootstrap_cmd ${_bootstrap_cmd}.")
-        message(STATUS "_boost_linkflags = ${_boost_linkflags}")
-        set(_arch_flags "-arch arm64")
-        set(_boost_linkflags "linkflags=${_arch_flags}")
-        message(STATUS "_cmake_args_osx_arch = '${_cmake_args_osx_arch}'")
-    elseif (${CMAKE_OSX_ARCHITECTURES} MATCHES "x86_64")
-        message(STATUS "Compiling Boost for x86_64.")
-        set(_arch_flags "-arch x86_64")
-    endif()
-    set(_boost_linkflags "linkflags=${_arch_flags}")
-endif ()
-
-set(_boost_flags "")
-if(APPLE)
-    set(_boost_flags 
-        "cflags=-fPIC ${_arch_flags} -mmacosx-version-min=${DEP_OSX_TARGET};"
-        "cxxflags=-fPIC ${_arch_flags} -mmacosx-version-min=${DEP_OSX_TARGET};"
-        "mflags=-fPIC ${_arch_flags} -mmacosx-version-min=${DEP_OSX_TARGET};"
-        "mmflags=-fPIC ${_arch_flags} -mmacosx-version-min=${DEP_OSX_TARGET}") 
-elseif (UNIX)
-    set(_boost_flags "cflags=-fPIC;cxxflags=-fPIC")
-endif()
-
-set(_build_cmd ${_build_cmd}
-               ${_boost_flags}
-               ${_boost_linkflags}
-               -j${NPROC}
-               ${_libs}
-               --layout=versioned
-               --debug-configuration
-               toolset=${_boost_toolset}
-               address-model=${_bits}
-               link=${_link}
-               threading=multi
-               boost.locale.icu=off
-               --disable-icu
-               ${_boost_variants}
-               stage)
-
-set(_install_cmd ${_build_cmd} --prefix=${_prefix} install)
-
-if (NOT IS_CROSS_COMPILE OR NOT APPLE OR BUILD_SHARED_LIBS)
-    message(STATUS "Standard boost build with bootstrap command '${_bootstrap_cmd}'")
-    message(STATUS "Standard boost build with patch command '${_patch_command}'")
-    message(STATUS "Standard boost build with build command '${_build_cmd}'")
-    message(STATUS "Standard boost build with install command '${_install_cmd}'")
-ExternalProject_Add(
-    dep_Boost
-	URL ${_boost_url}
-    URL_HASH SHA256=${_boost_hash}
-    DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/Boost
-    CONFIGURE_COMMAND "${_bootstrap_cmd}"
-    PATCH_COMMAND ${_patch_command}
-    BUILD_COMMAND "${_build_cmd}"
-    BUILD_IN_SOURCE    ON
-    INSTALL_COMMAND "${_install_cmd}"
+orcaslicer_add_cmake_project(Boost
+    URL "https://github.com/boostorg/boost/releases/download/boost-1.84.0/boost-1.84.0.tar.gz"
+    URL_HASH SHA256=4d27e9efed0f6f152dc28db6430b9d3dfb40c0345da7342eaa5a987dde57bd95
+    LIST_SEPARATOR |
+    CMAKE_ARGS
+        -DBOOST_EXCLUDE_LIBRARIES:STRING=contract|fiber|numpy|stacktrace|wave|test
+        -DBOOST_LOCALE_ENABLE_ICU:BOOL=OFF # do not link to libicu, breaks compatibility between distros
+        -DBUILD_TESTING:BOOL=OFF
+        "${_context_abi_line}"
+        "${_context_arch_line}"
 )

-else()
-
-ExternalProject_Add(
-    dep_Boost
-	URL ${_boost_url}
-    URL_HASH SHA256=${_boost_hash}
-    DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/Boost
-    CONFIGURE_COMMAND ./bootstrap.sh
-        --with-toolset=clang
-        --with-libraries=date_time,filesystem,iostreams,locale,log,regex,system,thread
-        "--prefix=${DESTDIR}/usr/local"
-#    PATCH_COMMAND ${_patch_command}
-    BUILD_COMMAND "${_build_cmd}"
-    BUILD_IN_SOURCE    ON
-    INSTALL_COMMAND "${_install_cmd}"
-)
-endif()
-
-if ("${CMAKE_SIZEOF_VOID_P}" STREQUAL "8")
-    message(STATUS "Patch the boost::polygon library with a custom one.")
-    # Patch the boost::polygon library with a custom one.
-    ExternalProject_Add(dep_boost_polygon
-        EXCLUDE_FROM_ALL ON
-        # GIT_REPOSITORY "https://github.com/prusa3d/polygon"
-        # GIT_TAG prusaslicer_gmp
-        URL https://github.com/prusa3d/polygon/archive/refs/heads/prusaslicer_gmp.zip
-        URL_HASH SHA256=abeb9710f0a7069fb9b22181ae5c56f6066002f125db210e7ffb27032aed6824
-        DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/boost_polygon
-        DEPENDS dep_Boost
-        CONFIGURE_COMMAND ""
-        BUILD_COMMAND ""
-        ${_cmake_args_osx_arch}
-        INSTALL_COMMAND ${CMAKE_COMMAND} -E copy_directory
-            "${CMAKE_CURRENT_BINARY_DIR}/dep_boost_polygon-prefix/src/dep_boost_polygon/include/boost/polygon"
-            "${DESTDIR}/usr/local/include/boost/polygon"
-    )
-    # Only override boost::Polygon Voronoi implementation with Vojtech's GMP hacks on 64bit platforms.
-    list(APPEND _dep_list "dep_boost_polygon")
-endif ()
+set(DEP_Boost_DEPENDS ZLIB)
--- a/deps/CMakeLists.txt
+++ b/deps/CMakeLists.txt
@@ -20,8 +20,17 @@
 # therefore, unfortunatelly, the installation cannot be copied/moved elsewhere without re-installing wxWidgets.
 #

-project(OrcaSlicer-deps)
 cmake_minimum_required(VERSION 3.2)
+if (APPLE)
+    # if CMAKE_OSX_DEPLOYMENT_TARGET is not set, set it to 11.3
+    if (NOT CMAKE_OSX_DEPLOYMENT_TARGET)
+        set(CMAKE_OSX_DEPLOYMENT_TARGET "11.3" CACHE STRING "Minimum OS X deployment version" FORCE)
+    endif ()
+    message(STATUS "CMAKE_OSX_DEPLOYMENT_TARGET: ${CMAKE_OSX_DEPLOYMENT_TARGET}")
+
+endif ()
+
+project(OrcaSlicer-deps)

 include(ExternalProject)
 include(ProcessorCount)
@@ -32,7 +41,7 @@ if (NPROC EQUAL 0)
 endif ()

 set(DESTDIR "${CMAKE_CURRENT_BINARY_DIR}/destdir" CACHE PATH "Destination directory")
-set(DEP_DOWNLOAD_DIR ${CMAKE_CURRENT_BINARY_DIR}/DL_CACHE CACHE PATH "Path for downloaded source packages.")
+set(DEP_DOWNLOAD_DIR ${CMAKE_CURRENT_BINARY_DIR}/../DL_CACHE CACHE PATH "Path for downloaded source packages.")

 option(DEP_DEBUG "Build debug variants (only applicable on Windows)" OFF)

@@ -163,7 +172,6 @@ if (MSVC)
    endif ()
 elseif (APPLE)
    message("OS X SDK Path: ${CMAKE_OSX_SYSROOT}")
-    set(CMAKE_OSX_DEPLOYMENT_TARGET "11.3" CACHE STRING "Minimum OS X deployment version" FORCE)
    if (CMAKE_OSX_DEPLOYMENT_TARGET)
        set(DEP_OSX_TARGET "${CMAKE_OSX_DEPLOYMENT_TARGET}")
        message("OS X Deployment Target: ${DEP_OSX_TARGET}")
--- a/deps/JPEG/JPEG.cmake
+++ b/deps/JPEG/JPEG.cmake
@@ -12,8 +12,8 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Linux")
 endif()

 orcaslicer_add_cmake_project(JPEG
-    URL https://github.com/libjpeg-turbo/libjpeg-turbo/archive/refs/tags/2.0.6.zip
-    URL_HASH SHA256=017bdc33ff3a72e11301c0feb4657cb27719d7f97fa67a78ed506c594218bbf1
+    URL https://github.com/libjpeg-turbo/libjpeg-turbo/archive/refs/tags/3.0.1.zip
+    URL_HASH SHA256=d6d99e693366bc03897677650e8b2dfa76b5d6c54e2c9e70c03f0af821b0a52f
    DEPENDS ${ZLIB_PKG}
    CMAKE_ARGS
        -DENABLE_SHARED=OFF
--- a/deps/MPFR/MPFR.cmake
+++ b/deps/MPFR/MPFR.cmake
@@ -26,8 +26,8 @@ else ()
    endif ()

    ExternalProject_Add(dep_MPFR
-        URL http://ftp.vim.org/ftp/gnu/mpfr/mpfr-3.1.6.tar.bz2 https://www.mpfr.org/mpfr-3.1.6/mpfr-3.1.6.tar.bz2  # mirrors are allowed
-        URL_HASH SHA256=cf4f4b2d80abb79e820e78c8077b6725bbbb4e8f41896783c899087be0e94068
+        URL https://www.mpfr.org/mpfr-current/mpfr-4.2.1.tar.bz2
+        URL_HASH SHA256=b9df93635b20e4089c29623b19420c4ac848a1b29df1cfd59f26cab0d2666aa0
        DOWNLOAD_DIR ${DEP_DOWNLOAD_DIR}/MPFR
        BUILD_IN_SOURCE ON
        CONFIGURE_COMMAND autoreconf -f -i && 
--- a/localization/i18n/OrcaSlicer.pot
+++ b/localization/i18n/OrcaSlicer.pot
--- a/localization/i18n/cs/OrcaSlicer_cs.po
+++ b/localization/i18n/cs/OrcaSlicer_cs.po
--- a/localization/i18n/de/OrcaSlicer_de.po
+++ b/localization/i18n/de/OrcaSlicer_de.po
--- a/localization/i18n/en/OrcaSlicer_en.po
+++ b/localization/i18n/en/OrcaSlicer_en.po
--- a/localization/i18n/es/OrcaSlicer_es.po
+++ b/localization/i18n/es/OrcaSlicer_es.po
--- a/localization/i18n/fr/OrcaSlicer_fr.po
+++ b/localization/i18n/fr/OrcaSlicer_fr.po
--- a/localization/i18n/hu/OrcaSlicer_hu.po
+++ b/localization/i18n/hu/OrcaSlicer_hu.po
--- a/localization/i18n/it/OrcaSlicer_it.po
+++ b/localization/i18n/it/OrcaSlicer_it.po
--- a/localization/i18n/ja/OrcaSlicer_ja.po
+++ b/localization/i18n/ja/OrcaSlicer_ja.po
--- a/localization/i18n/ko/OrcaSlicer_ko.po
+++ b/localization/i18n/ko/OrcaSlicer_ko.po
--- a/localization/i18n/list.txt
+++ b/localization/i18n/list.txt
@@ -7,13 +7,16 @@ src/slic3r/GUI/Gizmos/GLGizmoScale.cpp
 src/slic3r/GUI/Gizmos/GLGizmosManager.cpp
 src/slic3r/GUI/Gizmos/GLGizmoPainterBase.cpp
 src/slic3r/GUI/Gizmos/GizmoObjectManipulation.cpp
-src/slic3r/GUI/Gizmos/GLGizmoAdvancedCut.cpp
+src/slic3r/GUI/Gizmos/GLGizmoCut.cpp
 src/slic3r/GUI/Gizmos/GLGizmoSimplify.cpp
 src/slic3r/GUI/Gizmos/GLGizmoFaceDetector.cpp
 src/slic3r/GUI/Gizmos/GLGizmoSeam.cpp
 src/slic3r/GUI/Gizmos/GLGizmoSeam.hpp
 src/slic3r/GUI/Gizmos/GLGizmoText.cpp
 src/slic3r/GUI/Gizmos/GLGizmoText.hpp
+src/slic3r/GUI/Gizmos/GLGizmoEmboss.cpp
+src/slic3r/GUI/Gizmos/GLGizmoSVG.cpp
+src/slic3r/GUI/Gizmos/GLGizmoMeasure.cpp
 src/slic3r/GUI/GUI.cpp
 src/slic3r/GUI/GUI_App.cpp
 src/slic3r/GUI/GUI_AuxiliaryList.cpp
--- a/localization/i18n/nl/OrcaSlicer_nl.po
+++ b/localization/i18n/nl/OrcaSlicer_nl.po
--- a/localization/i18n/ru/OrcaSlicer_ru.po
+++ b/localization/i18n/ru/OrcaSlicer_ru.po
--- a/localization/i18n/sv/OrcaSlicer_sv.po
+++ b/localization/i18n/sv/OrcaSlicer_sv.po
--- a/localization/i18n/tr/OrcaSlicer_tr.po
+++ b/localization/i18n/tr/OrcaSlicer_tr.po
--- a/localization/i18n/uk/OrcaSlicer_uk.po
+++ b/localization/i18n/uk/OrcaSlicer_uk.po
--- a/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po
+++ b/localization/i18n/zh_CN/OrcaSlicer_zh_CN.po
--- a/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po
+++ b/localization/i18n/zh_TW/OrcaSlicer_zh_TW.po
--- a/resources/data/hints.ini
+++ b/resources/data/hints.ini
@@ -85,9 +85,18 @@ documentation_link = https://github.com/SoftFever/OrcaSlicer/wiki/Auxiliary-fan
 text = Air filtration/Exhuast Fan\nDid you know that OrcaSlicer can support Air filtration/Exhuast Fan?
 documentation_link = https://github.com/SoftFever/OrcaSlicer/wiki/air-filtration

+[hint:G-code window]
+text = G-code window\nYou can turn on/off the G-code window by pressing the <b>C</b> key.
+
+[hint:Switch workspaces]
+text = Switch workspaces\nYou can switch between <b>Prepare</b> and <b>Preview</b> workspaces by pressing the <b>Tab</b> key.
+
 [hint:How to use keyboard shortcuts]
 text = How to use keyboard shortcuts\nDid you know that Orca Slicer offers a wide range of keyboard shortcuts and 3D scene operations.

+[hint:Reverse on odd]
+text = Reverse on odd\nDid you know that <b>Reverse on odd</b> feature can significantly improve the surface quality of your overhangs?
+
 [hint:Cut Tool]
 text = Cut Tool\nDid you know that you can cut a model at any angle and position with the cutting tool?

--- a/resources/profiles/Anker/machine/Anker
+++ b/resources/profiles/Anker/machine/Anker
@@ -23,10 +23,8 @@
        "0x235"
    ],
    "printable_height": "250",
-    "machine_start_gcode": "M4899 T3 ; Enable v3 jerk and S-curve acceleration \nM104 S{first_layer_temperature[0]-30} ; Anti-ooze - Set hotend temp to 30 degrees less than target\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; set final nozzle temp to stabilize\nG28 ;Home",
-    "machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84",
    "layer_change_gcode": "",
    "scan_first_layer": "0",
    "nozzle_type": "hardened_steel",
    "auxiliary_fan": "0"
-}
+}
--- a/resources/profiles/Anker/machine/Anker
+++ b/resources/profiles/Anker/machine/Anker
@@ -23,10 +23,8 @@
        "0x220"
    ],
    "printable_height": "250",
-    "machine_start_gcode": "M4899 T3 ; Enable v3 jerk and S-curve acceleration \nM104 S{first_layer_temperature[0]-30} ; Anti-ooze - Set hotend temp to 30 degrees less than target\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; set final nozzle temp to stabilize\nG28 ;Home",
-    "machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84",
    "layer_change_gcode": "",
    "scan_first_layer": "0",
    "nozzle_type": "hardened_steel",
    "auxiliary_fan": "0"
-}
+}
--- a/resources/profiles/Anker/machine/fdm_machine_common.json
+++ b/resources/profiles/Anker/machine/fdm_machine_common.json
@@ -4,9 +4,9 @@
    "from": "system",
    "instantiation": "false",
    "gcode_flavor": "marlin2",
-   	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
-    "machine_start_gcode": "M4899 T3 ; Enable v3 jerk and S-curve acceleration \nM104 Sfirst_layer_temperature[0] ; Set hotend temp\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; set final nozzle temp to stabilize\nG28 ;Home",
-    "machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM84",
+    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
+    "machine_start_gcode": "M4899 T3 ; Enable v3 jerk and S-curve acceleration \nM104 S150 ; Set hotend temp to 150 degrees to prevent ooze\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; set final nozzle temp to stabilize\nG28 ;Home",
+    "machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM18",
    "change_filament_gcode": "M600",
    "machine_pause_gcode": "M601",
    "extruder_colour": [
@@ -117,4 +117,4 @@
        "0"
    ],
    "z_hop_types": "Normal Lift"
-}
+}
--- a/resources/profiles/Anker/process/0.15mm
+++ b/resources/profiles/Anker/process/0.15mm
@@ -15,7 +15,6 @@
    "support_bottom_z_distance": "0.15",
    "support_top_z_distance": "0.15",
    "top_surface_pattern": "monotonic",
-    "bottom_surface_pattern": "monotonic",
    "bottom_shell_thickness": "0",
    "top_shell_thickness": "0",
    "default_acceleration": "6000",
@@ -38,4 +37,4 @@
        "Anker M5 0.4 nozzle",
        "Anker M5C 0.4 nozzle"
    ]
-}
+}
--- a/resources/profiles/Anker/process/0.20mm
+++ b/resources/profiles/Anker/process/0.20mm
@@ -14,7 +14,6 @@
    "support_bottom_z_distance": "0.20",
    "support_top_z_distance": "0.20",
    "top_surface_pattern": "monotonic",
-    "bottom_surface_pattern": "monotonic",
    "bottom_shell_thickness": "0",
    "top_shell_thickness": "0",
    "default_acceleration": "6000",
@@ -37,4 +36,4 @@
        "Anker M5 0.4 nozzle",
        "Anker M5C 0.4 nozzle"
    ]
-}
+}
--- a/resources/profiles/Anker/process/0.25mm
+++ b/resources/profiles/Anker/process/0.25mm
@@ -14,7 +14,6 @@
    "support_bottom_z_distance": "0.25",
    "support_top_z_distance": "0.25",
    "top_surface_pattern": "monotonic",
-    "bottom_surface_pattern": "monotonic",
    "bottom_shell_thickness": "0",
    "top_shell_thickness": "0",
    "default_acceleration": "6000",
@@ -37,4 +36,4 @@
        "Anker M5 0.4 nozzle",
        "Anker M5C 0.4 nozzle"
    ]
-}
+}
--- a/resources/profiles/Anker/process/fdm_process_common.json
+++ b/resources/profiles/Anker/process/fdm_process_common.json
@@ -6,7 +6,7 @@
    "adaptive_layer_height": "0",
    "reduce_crossing_wall": "0",
    "max_travel_detour_distance": "0",
-    "bottom_surface_pattern": "monotonicline",
+    "bottom_surface_pattern": "monotonic",
    "bottom_shell_thickness": "0.5",
    "bridge_speed": "50",
    "bridge_acceleration": "500",
@@ -93,8 +93,8 @@
    "bottom_shell_layers": "4",
    "top_shell_layers": "5",
    "bridge_flow": "0.95",
-    "initial_layer_speed": "65",
-    "initial_layer_infill_speed": "125",
+    "initial_layer_speed": "50",
+    "initial_layer_infill_speed": "50",
    "initial_layer_travel_speed": "100%",
    "outer_wall_speed": "125",
    "inner_wall_speed": "250",
@@ -115,4 +115,4 @@
    "outer_wall_jerk": "10",
    "top_surface_jerk": "12",
    "travel_jerk": "20"
-}
+}
--- a/resources/profiles/BBL/process/0.48mm
+++ b/resources/profiles/BBL/process/0.48mm
@@ -8,7 +8,7 @@
    "compatible_printers": [
        "Bambu Lab X1 Carbon 0.8 nozzle",
        "Bambu Lab X1 0.8 nozzle",
-        "Bambu Lab P1S 0.6 nozzle",
+        "Bambu Lab P1S 0.8 nozzle",
        "Bambu Lab X1E 0.8 nozzle"
    ]
-}
+}
--- a/resources/profiles/Creality/Creality
+++ b/resources/profiles/Creality/Creality
--- a/resources/profiles/Creality/Creality
+++ b/resources/profiles/Creality/Creality
--- a/resources/profiles/Creality/Creality
+++ b/resources/profiles/Creality/Creality
--- a/resources/profiles/Creality/Creality
+++ b/resources/profiles/Creality/Creality
--- a/resources/profiles/Creality/Creality
+++ b/resources/profiles/Creality/Creality
--- a/resources/profiles/Creality/Ender-3
+++ b/resources/profiles/Creality/Ender-3
--- a/resources/profiles/Creality/creality_ender3v3ke_buildplate_model.stl
+++ b/resources/profiles/Creality/creality_ender3v3ke_buildplate_model.stl
--- a/resources/profiles/Creality/creality_ender3v3ke_buildplate_texture.png
+++ b/resources/profiles/Creality/creality_ender3v3ke_buildplate_texture.png
--- a/resources/profiles/Creality/creality_ender3v3se_buildplate_model.stl
+++ b/resources/profiles/Creality/creality_ender3v3se_buildplate_model.stl
--- a/resources/profiles/Creality/creality_ender3v3se_buildplate_texture.png
+++ b/resources/profiles/Creality/creality_ender3v3se_buildplate_texture.png
--- a/resources/profiles/Creality/creality_ender5s1_buildplate_model.stl
+++ b/resources/profiles/Creality/creality_ender5s1_buildplate_model.stl
--- a/resources/profiles/Creality/creality_ender5s1_buildplate_texture.png
+++ b/resources/profiles/Creality/creality_ender5s1_buildplate_texture.png
--- a/resources/profiles/Creality/creality_k1_buildplate_model.stl
+++ b/resources/profiles/Creality/creality_k1_buildplate_model.stl
--- a/resources/profiles/Creality/creality_k1_buildplate_texture.png
+++ b/resources/profiles/Creality/creality_k1_buildplate_texture.png
--- a/resources/profiles/Creality/creality_k1max_buildplate_model.stl
+++ b/resources/profiles/Creality/creality_k1max_buildplate_model.stl
--- a/resources/profiles/Creality/creality_k1max_buildplate_texture.png
+++ b/resources/profiles/Creality/creality_k1max_buildplate_texture.png
--- a/resources/profiles/Creality/machine/Creality
+++ b/resources/profiles/Creality/machine/Creality
@@ -14,8 +14,6 @@
    "extruder_clearance_max_radius": "90",
    "extruder_clearance_radius": "90",
    "machine_load_filament_time": "11",
-	"support_chamber_temp_control": "false",
-	"support_air_filtration": ["false"],
 	"nozzle_diameter": [
 		"0.4"
 	],
@@ -108,16 +106,21 @@
 	"deretraction_speed": [
 		"40"
 	],
-    "z_hop": [
-        "0.1"
-    ],
+	"z_hop": [
+		"0.1"
+	],
 	"single_extruder_multi_material": "1",
+	"manual_filament_change": "1",
 	"change_filament_gcode": "PAUSE",
-	"machine_pause_gcode": "M25",
+	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Creality Generic PLA @Ender-3V3-all"
 	],
 	"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp  \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp  \nG1 X-2.0 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize  \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize  \nG1 X-2.0 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-1.7 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-1.7 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0 ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
 	"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z5 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X2 Y218 F3000 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
-	"scan_first_layer": "0"
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
 }
--- a/resources/profiles/Creality/machine/Creality
+++ b/resources/profiles/Creality/machine/Creality
@@ -14,8 +14,6 @@
    "extruder_clearance_max_radius": "90",
    "extruder_clearance_radius": "90",
    "machine_load_filament_time": "11",
-	"support_chamber_temp_control": "false",
-	"support_air_filtration": ["false"],
 	"nozzle_diameter": [
 		"0.4"
 	],
@@ -109,6 +107,7 @@
 		"30"
 	],
 	"single_extruder_multi_material": "1",
+	"manual_filament_change": "1",
 	"change_filament_gcode": "M600",
 	"machine_pause_gcode": "M25",
 	"default_filament_profile": [
@@ -116,5 +115,9 @@
 	],
 	"machine_start_gcode": "M220 S100 ;Reset Feedrate \nM221 S100 ;Reset Flowrate \n \nM140 S[bed_temperature_initial_layer_single] ;Set final bed temp \nG28 ;Home \n \nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nM104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp \nG1 X-2.1 Y20 Z0.28 F5000.0 ;Move to start position \nM190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize \nM109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize \nG1 X-2.1 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line \nG1 X-2.4 Y145.0 Z0.28 F5000.0 ;Move to side a little \nG1 X-2.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line \nG92 E0  ;Reset Extruder \nG1 E-1.0000 F1800 ;Retract a bit \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 E0.0000 F1800",
 	"machine_end_gcode": "G91 ;Relative positionning \nG1 E-2 F2700 ;Retract a bit \nG1 E-2 Z0.2 F2400 ;Retract and raise Z \nG1 X5 Y5 F3000 ;Wipe out \nG1 Z10 ;Raise Z more \nG90 ;Absolute positionning \n \nG1 X0 Y0 ;Present print \nM106 S0 ;Turn-off fan \nM104 S0 ;Turn-off hotend \nM140 S0 ;Turn-off bed \n \nM84 X Y E ;Disable all steppers but Z",
-	"scan_first_layer": "0"
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
 }
--- a/resources/profiles/Creality/machine/Creality
+++ b/resources/profiles/Creality/machine/Creality
@@ -36,13 +36,22 @@
 	"retract_before_wipe": ["70%"],
 	"retraction_length": ["0.5"],
 	"retract_length_toolchange": ["1"],
+	"retraction_speed": ["40"],
 	"deretraction_speed": ["40"],
-	"z_hop": ["0.4"],
+	"extruder_clearance_height_to_lid": "101",
+	"extruder_clearance_height_to_rod": "45",
+	"extruder_clearance_radius": "45",
+	"z_hop": ["0.2"],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": ["Creality Generic PLA"],
 	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0"
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
 }
--- a/resources/profiles/Creality/machine/Creality
+++ b/resources/profiles/Creality/machine/Creality
@@ -38,12 +38,20 @@
 	"retract_length_toolchange": ["1"],
 	"retraction_speed": ["40"],
 	"deretraction_speed": ["40"],
-	"z_hop": ["0.4"],
+	"extruder_clearance_height_to_lid": "101",
+	"extruder_clearance_height_to_rod": "45",
+	"extruder_clearance_radius": "45",
+	"z_hop": ["0.2"],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": ["Creality Generic PLA"],
 	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0"
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
 }
--- a/resources/profiles/Creality/machine/Creality
+++ b/resources/profiles/Creality/machine/Creality
@@ -36,13 +36,22 @@
 	"retract_before_wipe": ["70%"],
 	"retraction_length": ["0.5"],
 	"retract_length_toolchange": ["1"],
+	"retraction_speed": ["40"],
 	"deretraction_speed": ["40"],
-	"z_hop": ["0.4"],
+	"extruder_clearance_height_to_lid": "101",
+	"extruder_clearance_height_to_rod": "45",
+	"extruder_clearance_radius": "45",
+	"z_hop": ["0.2"],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": ["Creality Generic PLA"],
 	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0"
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
 }
--- a/resources/profiles/Creality/machine/Creality
+++ b/resources/profiles/Creality/machine/Creality
@@ -14,6 +14,7 @@
 	"printable_height": "300",
 	"nozzle_type": "hardened_steel",
 	"auxiliary_fan": "1",
+	"support_air_filtration": "1",
 	"machine_max_acceleration_e": ["5000", "5000"],
 	"machine_max_acceleration_extruding": ["20000", "20000"],
 	"machine_max_acceleration_retracting": ["5000", "5000"],
@@ -36,13 +37,22 @@
 	"retract_before_wipe": ["70%"],
 	"retraction_length": ["0.5"],
 	"retract_length_toolchange": ["1"],
+	"retraction_speed": ["40"],
 	"deretraction_speed": ["40"],
-	"z_hop": ["0.4"],
+	"extruder_clearance_height_to_lid": "101",
+	"extruder_clearance_height_to_rod": "45",
+	"extruder_clearance_radius": "45",
+	"z_hop": ["0.2"],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": ["Creality Generic PLA"],
 	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0"
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
 }
--- a/resources/profiles/Creality/machine/Creality
+++ b/resources/profiles/Creality/machine/Creality
@@ -14,6 +14,7 @@
 	"printable_height": "300",
 	"nozzle_type": "hardened_steel",
 	"auxiliary_fan": "1",
+	"support_air_filtration": "1",
 	"machine_max_acceleration_e": ["5000", "5000"],
 	"machine_max_acceleration_extruding": ["20000", "20000"],
 	"machine_max_acceleration_retracting": ["5000", "5000"],
@@ -36,13 +37,22 @@
 	"retract_before_wipe": ["70%"],
 	"retraction_length": ["0.5"],
 	"retract_length_toolchange": ["1"],
+	"retraction_speed": ["40"],
 	"deretraction_speed": ["40"],
-	"z_hop": ["0.4"],
+	"extruder_clearance_height_to_lid": "101",
+	"extruder_clearance_height_to_rod": "45",
+	"extruder_clearance_radius": "45",
+	"z_hop": ["0.2"],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": ["Creality Generic PLA"],
 	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0"
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
 }
--- a/resources/profiles/Creality/machine/Creality
+++ b/resources/profiles/Creality/machine/Creality
@@ -14,6 +14,7 @@
 	"printable_height": "300",
 	"nozzle_type": "hardened_steel",
 	"auxiliary_fan": "1",
+	"support_air_filtration": "1",
 	"machine_max_acceleration_e": ["5000", "5000"],
 	"machine_max_acceleration_extruding": ["20000", "20000"],
 	"machine_max_acceleration_retracting": ["5000", "5000"],
@@ -36,13 +37,22 @@
 	"retract_before_wipe": ["70%"],
 	"retraction_length": ["0.5"],
 	"retract_length_toolchange": ["1"],
+	"retraction_speed": ["40"],
 	"deretraction_speed": ["40"],
-	"z_hop": ["0.4"],
+	"extruder_clearance_height_to_lid": "101",
+	"extruder_clearance_height_to_rod": "45",
+	"extruder_clearance_radius": "45",
+	"z_hop": ["0.2"],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
+	"manual_filament_change": "1",
+	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": ["Creality Generic PLA"],
 	"machine_start_gcode": "M140 S0\nM104 S0 \nSTART_PRINT EXTRUDER_TEMP=[nozzle_temperature_initial_layer] BED_TEMP=[bed_temperature_initial_layer_single]",
 	"machine_end_gcode": "END_PRINT",
-	"scan_first_layer": "0"
+	"scan_first_layer": "0",
+	"thumbnails": [
+		"96x96",
+		"300x300"
+	]
 }
--- a/resources/profiles/Creality/machine/fdm_machine_common.json
+++ b/resources/profiles/Creality/machine/fdm_machine_common.json
@@ -15,6 +15,8 @@
    ],
    "gcode_flavor": "marlin",
    "silent_mode": "0",
+	"support_chamber_temp_control": "0",
+	"support_air_filtration": "0",
    "machine_max_acceleration_e": [
        "5000"
    ],
@@ -111,6 +113,8 @@
        "1"
    ],
    "z_hop_types": "Normal Lift",
+    "support_air_filtration": "0",
+    "support_chamber_temp_control": "0",
    "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n",
    "default_print_profile": "0.16mm Optimal @Bambu Lab X1 Carbon 0.4 nozzle",
    "machine_start_gcode": "G0 Z20 F9000\nG92 E0; G1 E-10 F1200\nG28\nM970 Q1 A10 B10 C130 K0\nM970 Q1 A10 B131 C250 K1\nM974 Q1 S1 P0\nM970 Q0 A10 B10 C130 H20 K0\nM970 Q0 A10 B131 C250 K1\nM974 Q0 S1 P0\nM220 S100 ;Reset Feedrate\nM221 S100 ;Reset Flowrate\nG29 ;Home\nG90;\nG92 E0 ;Reset Extruder \nG1 Z2.0 F3000 ;Move Z Axis up \nG1 X10.1 Y20 Z0.28 F5000.0 ;Move to start position\nM109 S205;\nG1 X10.1 Y200.0 Z0.28 F1500.0 E15 ;Draw the first line\nG1 X10.4 Y200.0 Z0.28 F5000.0 ;Move to side a little\nG1 X10.4 Y20 Z0.28 F1500.0 E30 ;Draw the second line\nG92 E0 ;Reset Extruder \nG1 X110 Y110 Z2.0 F3000 ;Move Z Axis up",
--- a/resources/profiles/Creality/process/0.12mm
+++ b/resources/profiles/Creality/process/0.12mm
@@ -14,7 +14,7 @@
 	"bottom_shell_thickness": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "100",
-    "brim_type": "no_brim",
+	"brim_type": "no_brim",
 	"brim_width": "0",
 	"brim_object_gap": "0.1",
 	"compatible_printers_condition": "",
@@ -78,8 +78,8 @@
 	"support_interface_bottom_layers": "2",
 	"support_interface_spacing": "0.5",
 	"support_interface_speed": "100%",
-	"support_interface_pattern": "default",
-	"support_base_pattern": "default",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
 	"support_threshold_angle": "25",
--- a/resources/profiles/Creality/process/0.16mm
+++ b/resources/profiles/Creality/process/0.16mm
@@ -14,7 +14,7 @@
 	"bottom_shell_thickness": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "100",
-    "brim_type": "no_brim",
+	"brim_type": "no_brim",
 	"brim_width": "0",
 	"brim_object_gap": "0.1",
 	"compatible_printers_condition": "",
@@ -78,8 +78,8 @@
 	"support_interface_bottom_layers": "2",
 	"support_interface_spacing": "0.5",
 	"support_interface_speed": "100%",
-	"support_interface_pattern": "default",
-	"support_base_pattern": "default",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
 	"support_threshold_angle": "25",
--- a/resources/profiles/Creality/process/0.20mm
+++ b/resources/profiles/Creality/process/0.20mm
@@ -14,7 +14,7 @@
 	"bottom_shell_thickness": "0",
 	"bridge_flow": "0.95",
 	"bridge_speed": "100",
-    "brim_type": "no_brim",
+	"brim_type": "no_brim",
 	"brim_width": "0",
 	"brim_object_gap": "0.1",
 	"compatible_printers_condition": "",
@@ -78,8 +78,8 @@
 	"support_interface_bottom_layers": "2",
 	"support_interface_spacing": "0.5",
 	"support_interface_speed": "100%",
-	"support_interface_pattern": "default",
-	"support_base_pattern": "default",
+	"support_interface_pattern": "auto",
+	"support_base_pattern": "rectilinear",
 	"support_base_pattern_spacing": "2.5",
 	"support_speed": "50",
 	"support_threshold_angle": "25",
--- a/resources/profiles/Creality/process/fdm_process_common_klipper.json
+++ b/resources/profiles/Creality/process/fdm_process_common_klipper.json
@@ -10,5 +10,7 @@
    "infill_jerk": "12",
    "travel_jerk": "12",
    "inner_wall_jerk": "7",
-    "top_surface_jerk": "7"
+    "top_surface_jerk": "7",
+    "exclude_object": "1"
+
 }
--- a/resources/profiles/Custom/process/fdm_process_klipper_common.json
+++ b/resources/profiles/Custom/process/fdm_process_klipper_common.json
@@ -104,5 +104,6 @@
    "enable_arc_fitting": "0",
    "compatible_printers": [
      "MyKlipper 0.4 nozzle"
-    ]
+    ],
+    "exclude_object": "1"
 }
--- a/resources/profiles/Elegoo/machine/Elegoo
+++ b/resources/profiles/Elegoo/machine/Elegoo
@@ -45,13 +45,13 @@
 		"45"
 	],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M0",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Elegoo Generic PLA @0.2 nozzle"
 	],
-	"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
-	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
+	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"scan_first_layer": "0"
--- a/resources/profiles/Elegoo/machine/Elegoo
+++ b/resources/profiles/Elegoo/machine/Elegoo
@@ -45,13 +45,13 @@
 		"45"
 	],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M0",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Elegoo Generic PLA @0.4 nozzle"
 	],
-	"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
-	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
+	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"scan_first_layer": "0"
--- a/resources/profiles/Elegoo/machine/Elegoo
+++ b/resources/profiles/Elegoo/machine/Elegoo
@@ -45,13 +45,13 @@
 		"45"
 	],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M0",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Elegoo Generic PLA @0.6 nozzle"
 	],
-	"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
-	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
+	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"scan_first_layer": "0"
--- a/resources/profiles/Elegoo/machine/Elegoo
+++ b/resources/profiles/Elegoo/machine/Elegoo
@@ -45,13 +45,13 @@
 		"45"
 	],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M0",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Elegoo Generic PLA @0.8 nozzle"
 	],
-	"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
-	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"machine_start_gcode": ";ELEGOO NEPTUNE 4\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder\n",
+	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"scan_first_layer": "0"
--- a/resources/profiles/Elegoo/machine/Elegoo
+++ b/resources/profiles/Elegoo/machine/Elegoo
@@ -75,13 +75,13 @@
    "wipe_distance": ["1"],
    "z_hop": ["0.4"],
    "z_hop_types": ["Normal Lift"],
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M0",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Elegoo Generic PLA @0.2 nozzle"
 	],
-	"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
-	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X10 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+10, printable_height-10)} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
+	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"scan_first_layer": "0"
--- a/resources/profiles/Elegoo/machine/Elegoo
+++ b/resources/profiles/Elegoo/machine/Elegoo
@@ -75,13 +75,13 @@
    "wipe_distance": ["1"],
    "z_hop": ["0.4"],
    "z_hop_types": ["Normal Lift"],
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M0",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Elegoo Generic PLA @0.4 nozzle"
 	],
-	"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
-	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X10 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+10, printable_height-10)} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
+	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"scan_first_layer": "0"
--- a/resources/profiles/Elegoo/machine/Elegoo
+++ b/resources/profiles/Elegoo/machine/Elegoo
@@ -75,13 +75,13 @@
    "wipe_distance": ["1"],
    "z_hop": ["0.4"],
    "z_hop_types": ["Normal Lift"],
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M0",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Elegoo Generic PLA @0.6 nozzle"
 	],
-	"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
-	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X10 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+10, printable_height-10)} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
+	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"scan_first_layer": "0"
--- a/resources/profiles/Elegoo/machine/Elegoo
+++ b/resources/profiles/Elegoo/machine/Elegoo
@@ -75,13 +75,13 @@
    "wipe_distance": ["1"],
    "z_hop": ["0.4"],
    "z_hop_types": ["Normal Lift"],
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M0",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Elegoo Generic PLA @0.8 nozzle"
 	],
-	"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
-	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X10 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+10, printable_height-10)} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"machine_start_gcode": ";ELEGOO NEPTUNE 4 MAX\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X165 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X165 Y0.5 Z0.4 F300 ;Move to start position\nG1 X265 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X260 F3000\nG92 E0 ;Reset Extruder",
+	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y400 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"scan_first_layer": "0"
--- a/resources/profiles/Elegoo/machine/Elegoo
+++ b/resources/profiles/Elegoo/machine/Elegoo
@@ -81,13 +81,13 @@
    "wipe_distance": ["1"],
    "z_hop": ["0.4"],
    "z_hop_types": ["Normal Lift"],
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M0",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Elegoo Generic PLA @0.2 nozzle"
 	],
-	"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 s[first_layer_bed_temperature]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0 F6000\nG1 Z0 F300\nM109 s[first_layer_temperature]\nG92 E0 ;Reset Extruder\nG1 X115 Y0 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
-	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
+	"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
+	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"scan_first_layer": "0"
--- a/resources/profiles/Elegoo/machine/Elegoo
+++ b/resources/profiles/Elegoo/machine/Elegoo
@@ -81,13 +81,13 @@
    "wipe_distance": ["1"],
    "z_hop": ["0.4"],
    "z_hop_types": ["Normal Lift"],
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M0",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Elegoo Generic PLA @0.4 nozzle"
 	],
-	"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 s[first_layer_bed_temperature]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0 F6000\nG1 Z0 F300\nM109 s[first_layer_temperature]\nG92 E0 ;Reset Extruder\nG1 X115 Y0 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
-	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
+	"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
+	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"scan_first_layer": "0"
--- a/resources/profiles/Elegoo/machine/Elegoo
+++ b/resources/profiles/Elegoo/machine/Elegoo
@@ -81,13 +81,13 @@
    "wipe_distance": ["1"],
    "z_hop": ["0.4"],
    "z_hop_types": ["Normal Lift"],
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M0",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Elegoo Generic PLA @0.6 nozzle"
 	],
-	"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 s[first_layer_bed_temperature]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0 F6000\nG1 Z0 F300\nM109 s[first_layer_temperature]\nG92 E0 ;Reset Extruder\nG1 X115 Y0 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
-	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
+	"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
+	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"scan_first_layer": "0"
--- a/resources/profiles/Elegoo/machine/Elegoo
+++ b/resources/profiles/Elegoo/machine/Elegoo
@@ -81,13 +81,13 @@
    "wipe_distance": ["1"],
    "z_hop": ["0.4"],
    "z_hop_types": ["Normal Lift"],
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M0",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Elegoo Generic PLA @0.8 nozzle"
 	],
-	"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 s[first_layer_bed_temperature]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0 F6000\nG1 Z0 F300\nM109 s[first_layer_temperature]\nG92 E0 ;Reset Extruder\nG1 X115 Y0 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
-	"machine_end_gcode": "G91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
+	"machine_start_gcode": ";ELEGOO NEPTUNE 4 PLUS\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X115 Y0.5 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X115 Y0.5 Z0.4 F300 ;Move to start position\nG1 X215.0 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X210 F3000\nG92 E0 ;Reset Extruder",
+	"machine_end_gcode": ";PRINT_END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y300 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"scan_first_layer": "0"
--- a/resources/profiles/Elegoo/machine/Elegoo
+++ b/resources/profiles/Elegoo/machine/Elegoo
@@ -48,13 +48,13 @@
 		"45"
 	],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M0",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Elegoo Generic PLA @0.2 nozzle"
 	],
-	"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
-	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
+	"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"scan_first_layer": "0"
--- a/resources/profiles/Elegoo/machine/Elegoo
+++ b/resources/profiles/Elegoo/machine/Elegoo
@@ -48,13 +48,13 @@
 		"45"
 	],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M0",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": [
 		"Elegoo Generic PLA @0.4 nozzle"
 	],
-	"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
-	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
+	"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"scan_first_layer": "0"
--- a/resources/profiles/Elegoo/machine/Elegoo
+++ b/resources/profiles/Elegoo/machine/Elegoo
@@ -25,11 +25,11 @@
 	"retract_length_toolchange": ["2"],
 	"deretraction_speed": ["45"],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
-	"machine_pause_gcode": "M0",
+	"change_filament_gcode": "M600",
+	"machine_pause_gcode": "PAUSE",
 	"default_filament_profile": ["Elegoo Generic PLA @0.6 nozzle"],
-	"machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
-	"machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
+	"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
 	"layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
 	"scan_first_layer": "0"
--- a/resources/profiles/Elegoo/machine/Elegoo
+++ b/resources/profiles/Elegoo/machine/Elegoo
@@ -39,11 +39,11 @@
  "retract_length_toolchange": ["2"],
  "deretraction_speed": ["45"],
  "single_extruder_multi_material": "1",
-  "change_filament_gcode": "",
-  "machine_pause_gcode": "M0",
+  "change_filament_gcode": "M600",
+  "machine_pause_gcode": "PAUSE",
  "default_filament_profile": ["Elegoo Generic PLA @0.8 nozzle"],
-  "machine_start_gcode": "M413 S0 ; disable Power Loss Recovery\nG90 ; use absolute coordinates\nM83 ; extruder relative mode\nM104 S120 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nM140 S[bed_temperature_initial_layer_single] ; set final bed temp\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\n;G29 ; run abl mesh\nM420 S1 ; load mesh\nG1 Z50 F240\nG1 X2 Y10 F3000\n\nM190 S[bed_temperature_initial_layer_single] ; wait for bed temp to stabilize\nM109 S[nozzle_temperature_initial_layer] ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X2.3 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0",
-  "machine_end_gcode": "{if max_layer_z < printable_height}G1 Z{z_offset+min(max_layer_z+2, printable_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < printable_height-10}G1 Z{z_offset+min(max_layer_z+70, printable_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < printable_height*0.6}G1 Z{printable_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors",
+	"machine_start_gcode": ";ELEGOO NEPTUNE 4 PRO\nM220 S100 ;Set the feed speed to 100%\nM221 S100 ;Set the flow rate to 100%\nM104 S140\nM190 S[bed_temperature_initial_layer_single]\nG90\nG28 ;home\nG1 Z10 F300\nG1 X67.5 Y0 F6000\nG1 Z0 F300\nM109 S[nozzle_temperature_initial_layer]\nG92 E0 ;Reset Extruder\nG1 X67.5 Y0 Z0.4 F300 ;Move to start position\nG1 X167.5 E30 F400 ;Draw the first line\nG1 Z0.6 F120.0 ;Move to side a little\nG1 X162.5 F3000\nG92 E0 ;Reset Extruder",
+	"machine_end_gcode": ";PRINT END\nG91 ;Relative positionning\nG1 E-2 F2700 ;Retract a bit\nG1 E-8 X5 Y5 Z3 F3000 ;Retract\nG90 ;Absolute positionning\nG1 X10 Y220 F6000;Finish print\nM106 S0 ;Turn-off fan\nM104 S0 ;Turn-off hotend\nM140 S0 ;Turn-off bed\nM84 X Y E ;Disable all steppers but Z",
  "before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0\n;[layer_z]\n\n",
  "layer_change_gcode": ";AFTER_LAYER_CHANGE\n;[layer_z]",
  "scan_first_layer": "0"
--- a/resources/profiles/Elegoo/machine/Elegoo
+++ b/resources/profiles/Elegoo/machine/Elegoo
@@ -101,7 +101,7 @@
 		"40"
 	],
 	"single_extruder_multi_material": "1",
-	"change_filament_gcode": "",
+	"change_filament_gcode": "PAUSE",
 	"machine_pause_gcode": "M0",
 	"default_filament_profile": [
 		"Elegoo Generic PLA"
--- a/resources/profiles/Elegoo/process/fdm_process_neptune4_common.json
+++ b/resources/profiles/Elegoo/process/fdm_process_neptune4_common.json
@@ -110,5 +110,6 @@
    "top_surface_speed": "120",
    "gap_infill_speed": "120",
    "sparse_infill_speed": "200",
-    "travel_speed": "350"
+    "travel_speed": "350",
+    "exclude_object": "1"
 }
--- a/resources/profiles/Elegoo/process/fdm_process_neptune4max_common.json
+++ b/resources/profiles/Elegoo/process/fdm_process_neptune4max_common.json
@@ -30,5 +30,6 @@
    "top_surface_speed": "120",
    "gap_infill_speed": "120",
    "sparse_infill_speed": "200",
-    "travel_speed": "300"
+    "travel_speed": "300",
+    "exclude_object": "1"
 }
--- a/resources/profiles/FLSun/process/0.20mm
+++ b/resources/profiles/FLSun/process/0.20mm
@@ -25,5 +25,6 @@
  "travel_speed": "400",
  "compatible_printers": [
    "FLSun V400 0.4 nozzle"
-  ]
+  ],
+	"exclude_object": "1"
 }
--- a/resources/profiles/InfiMech/process/fdm_process_common.json
+++ b/resources/profiles/InfiMech/process/fdm_process_common.json
@@ -219,5 +219,6 @@
 		"70"
 	],
 	"xy_contour_compensation": "0",
-	"xy_hole_compensation": "0"
+	"xy_hole_compensation": "0",
+    "exclude_object": "1"
 }
--- a/resources/profiles/OrcaArena/process/fdm_process_common.json
+++ b/resources/profiles/OrcaArena/process/fdm_process_common.json
@@ -67,5 +67,6 @@
    "enable_prime_tower": "0",
    "prime_tower_width": "60",
    "xy_hole_compensation": "0",
-    "xy_contour_compensation": "0"
+    "xy_contour_compensation": "0",
+    "exclude_object": "1"
 }
--- a/resources/profiles/Prusa/process/process_common_mk4.json
+++ b/resources/profiles/Prusa/process/process_common_mk4.json
@@ -24,5 +24,6 @@
  "top_surface_acceleration": "1000",
  "travel_acceleration": "4000",
  "inner_wall_acceleration": "4000",
-  "outer_wall_acceleration": "3000"
+  "outer_wall_acceleration": "3000",
+  "exclude_object": "1"
 }
--- a/resources/profiles/Qidi.json
+++ b/resources/profiles/Qidi.json
@@ -579,6 +579,14 @@
        {
            "name": "QIDI ABS-GF10",
            "sub_path": "filament/QIDI ABS-GF10.json"
+        },
+        {
+            "name": "Qidi PC-ABS-FR",
+            "sub_path": "filament/Qidi PC-ABS-FR.json"
+        },
+        {
+            "name": "Qidi ASA-Aero",
+            "sub_path": "filament/Qidi ASA-Aero.json"
        }
    ],
    "machine_list": [
--- a/resources/profiles/Qidi/filament/QIDI
+++ b/resources/profiles/Qidi/filament/QIDI
@@ -7,7 +7,7 @@
    "instantiation": "true",
    "inherits": "fdm_filament_abs",
    "filament_flow_ratio": [
-        "0.8"
+        "0.9"
    ],
    "filament_max_volumetric_speed": [
        "15"
--- a/resources/profiles/Qidi/filament/Qidi
+++ b/resources/profiles/Qidi/filament/Qidi
@@ -0,0 +1,76 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSA04",
+    "name": "Qidi ASA-Aero",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_asa",
+	"filament_max_volumetric_speed": [
+        "16"
+    ],
+    "filament_flow_ratio": [
+        "0.7"
+    ],
+    "nozzle_temperature_initial_layer": [
+        "250"
+      ],
+      "nozzle_temperature": [
+        "270"
+      ],
+      "cool_plate_temp" : [
+        "90"
+    ],
+    "eng_plate_temp" : [
+        "90"
+    ],
+    "hot_plate_temp" : [
+        "90"
+    ],
+    "textured_plate_temp" : [
+        "90"
+    ],
+    "cool_plate_temp_initial_layer" : [
+        "90"
+    ],
+    "eng_plate_temp_initial_layer" : [
+        "90"
+    ],
+    "hot_plate_temp_initial_layer" : [
+        "90"
+    ],
+    "textured_plate_temp_initial_layer" : [
+        "90"
+    ],  
+      "enable_pressure_advance": [
+        "1"
+    ],
+    "pressure_advance": [
+        "0.021"
+    ],
+    "filament_retraction_length": [
+        "0"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\nM141 S60\n{if  (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.4 nozzle",
+        "Qidi X-Max 0.4 nozzle",
+        "Qidi X-CF Pro 0.4 nozzle",
+		"Qidi X-Smart 3 0.4 nozzle",
+		"Qidi X-Plus 3 0.4 nozzle",
+		"Qidi X-Max 3 0.4 nozzle",
+        "Qidi X-Max 0.6 nozzle",
+        "Qidi X-CF Pro 0.6 nozzle",
+    "Qidi X-Smart 3 0.6 nozzle",
+    "Qidi X-Plus 3 0.6 nozzle",
+    "Qidi X-Max 3 0.6 nozzle",
+    "Qidi X-Plus 0.8 nozzle",
+    "Qidi X-Max 0.8 nozzle",
+    "Qidi X-CF Pro 0.8 nozzle",
+  "Qidi X-Smart 3 0.8 nozzle",
+  "Qidi X-Plus 3 0.8 nozzle",
+  "Qidi X-Max 3 0.8 nozzle"
+	]
+}
--- a/resources/profiles/Qidi/filament/Qidi
+++ b/resources/profiles/Qidi/filament/Qidi
@@ -0,0 +1,46 @@
+{
+    "type": "filament",
+    "filament_id": "GFB99",
+    "setting_id": "GFSA04",
+    "name": "Qidi PC-ABS-FR",
+    "from": "system",
+    "instantiation": "true",
+    "inherits": "fdm_filament_abs",
+    "filament_flow_ratio": [
+        "0.92"
+    ],
+    "filament_max_volumetric_speed": [
+        "8"
+    ],
+    "enable_pressure_advance": [
+        "1"
+    ],
+    "pressure_advance": [
+        "0.04"
+    ],
+    "overhang_fan_speed": [
+        "60"
+    ],
+    "filament_start_gcode": [
+        "; filament start gcode\nM141 S55\n{if  (bed_temperature[current_extruder] >90)||(bed_temperature_initial_layer[current_extruder] >90)}M106 P3 S0\n{elsif(bed_temperature[current_extruder] >70)||(bed_temperature_initial_layer[current_extruder] >70)}M106 P3 S153\n{elsif(bed_temperature[current_extruder] >35)||(bed_temperature_initial_layer[current_extruder] >35)}M106 P3 S255\n{endif}"
+    ],
+	"compatible_printers": [
+        "Qidi X-Plus 0.4 nozzle",
+        "Qidi X-Max 0.4 nozzle",
+        "Qidi X-CF Pro 0.4 nozzle",
+        "Qidi X-Smart 3 0.4 nozzle",
+        "Qidi X-Plus 3 0.4 nozzle",
+        "Qidi X-Max 3 0.4 nozzle",
+        "Qidi X-Max 0.6 nozzle",
+        "Qidi X-CF Pro 0.6 nozzle",
+    "Qidi X-Smart 3 0.6 nozzle",
+    "Qidi X-Plus 3 0.6 nozzle",
+    "Qidi X-Max 3 0.6 nozzle",
+    "Qidi X-Plus 0.8 nozzle",
+    "Qidi X-Max 0.8 nozzle",
+    "Qidi X-CF Pro 0.8 nozzle",
+  "Qidi X-Smart 3 0.8 nozzle",
+  "Qidi X-Plus 3 0.8 nozzle",
+  "Qidi X-Max 3 0.8 nozzle"
+	]
+}
--- a/resources/profiles/Qidi/filament/fdm_filament_pla.json
+++ b/resources/profiles/Qidi/filament/fdm_filament_pla.json
@@ -89,6 +89,6 @@
        "4"
    ],
    "additional_cooling_fan_speed": [
-        "100"
+        "0"
    ]
 }
--- a/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json
+++ b/resources/profiles/Qidi/process/fdm_process_qidi_x3_common.json
@@ -114,5 +114,6 @@
    "internal_solid_infill_pattern": "monotonic",
    "initial_layer_travel_speed": "50%",
    "filter_out_gap_fill": "2",
-    "notes": "If you want to use Orca's chamber temperature control feature, check that printer.cfg has added the following M191 macro.\nTo add it: go to Fluidd web interface--configuration, copy the following code to the top of the printer.cfg document, SAVE&RESATART  \n\n[gcode_macro M191]\ngcode:\n    {% set s = params.S|float %}\n    {% if s == 0 %}\n        # If target temperature is 0, do nothing\n        M117 Chamber heating cancelled\n    {% else %}\n        SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={s}\n        # Orca: uncomment the following line if you want to use heat bed to assist chamber heating\n        M140 S90\n        TEMPERATURE_WAIT SENSOR=\"heater_generic chamber_heater\" MINIMUM={s-1} MAXIMUM={s+1}\n        M117 Chamber at target temperature\n    {% endif %}"
+    "notes": "If you want to use Orca's chamber temperature control feature, check that printer.cfg has added the following M191 macro.\nTo add it: go to Fluidd web interface--configuration, copy the following code to the top of the printer.cfg document, SAVE&RESATART  \n\n[gcode_macro M191]\ngcode:\n    {% set s = params.S|float %}\n    {% if s == 0 %}\n        # If target temperature is 0, do nothing\n        M117 Chamber heating cancelled\n    {% else %}\n        SET_HEATER_TEMPERATURE HEATER=chamber_heater TARGET={s}\n        # Orca: uncomment the following line if you want to use heat bed to assist chamber heating\n        M140 S90\n        TEMPERATURE_WAIT SENSOR=\"heater_generic chamber_heater\" MINIMUM={s-1} MAXIMUM={s+1}\n        M117 Chamber at target temperature\n    {% endif %}",
+    "exclude_object": "1"
 }
--- a/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json
+++ b/resources/profiles/Ratrig/process/fdm_process_ratrig_common.json
@@ -111,5 +111,6 @@
        "RatRig V-Minion 0.4 nozzle",
        "RatRig V-Cast 0.4 nozzle",
        "RatRig V-Cast 0.6 nozzle"
-    ]
+    ],
+    "exclude_object": "1"
 }
--- a/resources/profiles/Vivedino/process/fdm_process_klipper_common.json
+++ b/resources/profiles/Vivedino/process/fdm_process_klipper_common.json
@@ -106,5 +106,6 @@
  "compatible_printers": [
    "Troodon 2.0 Klipper 0.4 nozzle",
    "Troodon 2.0 RRF 0.4 nozzle"
-  ]
+  ],
+  "exclude_object": "1"
 }
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
Noisyfox	e713849fed	QoL: Keyboard shortcuts updates & fixes (#3457 ) * Bring back the shortcut to zoom in & out * Update keyboard shortcut info * Update keyboard shortcut info * Different handling of shortcut 'T' for emboss text Cherry-picked from prusa3d/PrusaSlicer@58e3143ad8 Co-authored-by: Filip Sykala - NTB T15p <Filip.Sykala@prusa3d.cz> --------- Co-authored-by: Filip Sykala - NTB T15p <Filip.Sykala@prusa3d.cz> (cherry picked from commit `002208fc8c`)	2024-01-04 19:36:04 +08:00
SoftFever	9d59cd66c4	Feature/update deps (#3445 ) * update deps * fix win build errors * fix mac build * update linux (cherry picked from commit `77b6225060`)	2024-01-04 19:36:04 +08:00
Noisyfox	1ea33f0919	Fix NaN when adding negative part (#3423 ) (#3431 )	2024-01-02 20:48:25 +08:00
SoftFever	8e3f7e7bf2	some profile changes based on feedbacks	2024-01-02 20:41:41 +08:00
SoftFever	eec8508e74	Fix boost download server issue (cherry picked from commit `b2ce4c1880`)	2024-01-02 16:26:01 +08:00
SoftFever	3efe5f82d7	bump dev to 2.0.0-dev version	2024-01-02 16:02:51 +08:00
SoftFever	70c282667f	Fix wrong option order	2024-01-02 16:02:51 +08:00
Noisyfox	712478c240	Fix issue that "Per-glyph" option not working when UI is in Chinese (#3425 )	2024-01-02 16:01:05 +08:00
SoftFever	9e443baf95	Improve rendering quality when model color is pure black	2024-01-02 13:14:46 +08:00
SoftFever	8d5bb6cc4b	Set CMAKE_OSX_DEPLOYMENT_TARGET properly on dev machine when calling build_release_mac.sh	2024-01-02 13:14:20 +08:00
Scott Mudge	209e9a2bb9	Add configurable short wall/perimeter cleaning for Arachne (#2790 ) * add feature to add configurable value to clean/remove short un-closed walls/perimeters, to improve print times and reduce stringing (and generally lead to a cleaner print). * fixes to short wall removal, which no longer affects bottom or top surfaces. allowed adjusting Top-surface threshold (renamed from One wall threshold for clarity) when short wall removal value is configured above default of 0.5. * small fix for toggle_line for min_width_top_surface, to only be visible if min_length_factor > 0.5 and arachne is enabled. * Use copy of input_params * revert `One wall threshold"` string change --------- Co-authored-by: SoftFever <softfeverever@gmail.com>	2024-01-01 22:21:36 +00:00
Thomas	9701ab18e8	Added PAUSE command for change_filament_gcode on Elegoo Neptune 4 series (#3411 ) Added PAUSE command for change_filament_gcode on-behalf-of: @tomsbasement <tom@tomsbasement.shop>	2024-01-01 20:01:30 +08:00
SufficentMuffin	f99394b53c	Update 0.48mm Standard @BBL X1C 0.8 nozzle.json (#3379 ) * Update 0.48mm Standard @BBL X1C 0.8 nozzle.json Removed P1S 0.6mm nozzle from process profile. * fix --------- Co-authored-by: SoftFever <softfeverever@gmail.com>	2024-01-01 19:42:53 +08:00
Thomas	2cfcd0d03a	Updated French translations. (#3410 ) on-behalf-of: @tomsbasement tom@tomsbasement.shop	2024-01-01 19:35:16 +08:00
SoftFever	4d1885e7a4	fix intermittent crashes caused by detect_overhang_wall	2024-01-01 19:30:55 +08:00
SoftFever	5683729b17	Fxied a regression that wall order can't be set in height modifier	2024-01-01 18:21:19 +08:00
SoftFever	2f916f5ee9	Fixed crashes caused by pressure eq when support is used (#3407 ) Fixed crashed caused by pressure eq when support is used	2024-01-01 17:05:40 +08:00
Thomas	967dc3d487	Creality K1/K1 Max, Ender 3 V3 Series and Ender 5 S1 baseplates (#3365 ) * Fixed retraction speed and added missing parameters. * Fixes for manual filament change * More tunings and fixes. * Fixes and tunings * Formatting * Decrease z-hop for K1 * K1/K1 Max, Ender 3 V3 and Ender 5 S1 correct build platforms (Thanks Henlor !)	2024-01-01 15:08:56 +08:00
SoftFever	a36df66083	Revert "Improve ExtrusionLine::simplify, eliminating many very-short extrusion segments which led to blemishes in thin-wall models sliced with Arachne (#3014 )" This reverts commit `3ca290d503`. Fixed #3340 #3375	2024-01-01 14:20:47 +08:00
Olcay ÖREN	1dfaef3948	Update OrcaSlicer_tr.po - TURKISH translation update (#3396 ) * Update OrcaSlicer_tr.po - TURKISH translation update * Update OrcaSlicer_tr.po - TURKISH translation update --------- Co-authored-by: SoftFever <softfeverever@gmail.com>	2024-01-01 13:47:25 +08:00
Vitalii Kutia	c623070395	edit Ukrainian translation (#3403 )	2024-01-01 13:47:04 +08:00
Lee Jong Mun	52c08ca481	kor translation update (#3406 )	2024-01-01 13:46:53 +08:00
Noisyfox	8fd4477110	Fix crash when click the color paint gizmo when object part is selected (#3405 ) Fix crash when click the color paint gizmo when object part is selected (#3404) Cherry-picked from bambulab/BambuStudio@1e99ce9535 Co-authored-by: liz.li <liz.li@bambulab.com>	2024-01-01 13:45:53 +08:00
Silence	60ab79cae0	Update README.md to provide alternative download links of webview2 runtimes (#3384 ) Improve install and build instructions slightly.	2023-12-31 19:05:23 +08:00
Thomas	98a9bf6170	Creality Ender 3 V3/KE important fixes and some fine-tunings (#3362 ) * Fixed retraction speed and added missing parameters. * Fixes for manual filament change * More tunings and fixes. * Fixes and tunings * Formatting * Decrease z-hop for K1 * Updated thumbnails sizes to the same as Creality Print has.	2023-12-31 18:36:32 +08:00
Thomas	8afb675cd7	Fr translations (#3361 ) * Updated French translations. * Reword "strength" * Updated translations * Added missing translations. * Fixed place on face translation * Fixed strings. * Updated locales * Better translation for "Brim ears" * Other round of fixes * Added missing strings * Renaming studio to Orca. * Rewording "Arc fitting" * Flush means purge and not "rinçage"	2023-12-31 14:46:18 +08:00
SoftFever	074490491e	fixed a crash bug when switching to Bambu device page too fast	2023-12-31 13:31:58 +08:00
Noisyfox	a8ade1554f	Fix preview legend window size (#3363 ) Fix issue that the legend window expands to all available horizontal space if scrollbar is displayed	2023-12-30 22:02:32 +08:00
SoftFever	1d8cdf04d2	remove P1P-P1S warning	2023-12-30 15:22:18 +08:00
SoftFever	d0cf699617	bump dev branch version to 1.9.1-dev	2023-12-30 10:29:48 +08:00
SoftFever	527aefc6fb	preset export small tweak	2023-12-30 10:29:32 +08:00
kpishere	044e25d1cf	Feature/build target 10.15 (#3252 ) * Set target to 10.15, make porter templates explicit * CMAKE_OSX_DEPLOYMENT_TARGET refactor * Update build_release_macos.sh fix typo --------- Co-authored-by: SoftFever <softfeverever@gmail.com>	2023-12-30 09:12:06 +08:00
Olcay ÖREN	141e74a5d9	Update OrcaSlicer_tr.po - TURKISH translation update (#3354 ) Co-authored-by: SoftFever <softfeverever@gmail.com>	2023-12-30 08:52:26 +08:00
SoftFever	c08ace303a	fix po errors	2023-12-30 08:50:27 +08:00
SoftFever	d5210c9fc9	Rename '.bbscfg/bbsflmt' to 'orca_printer/orca_filament' for clarity and to reduce user errors. Note: Configs may no longer be compatible with BS hence the change	2023-12-29 23:36:28 +08:00
SoftFever	ec9030e0ef	create datadir folder if not exist	2023-12-29 22:49:45 +08:00
Fabio Forcina	20f7cc0cf9	Updated Italian translation (#3347 )	2023-12-29 13:52:30 +00:00
Heiko Liebscher	86936e8873	Update German translation for 1.9 (#3343 )	2023-12-29 20:20:21 +08:00
Thomas	e3f08c544b	Changed Slic3r mentions (#3344 )	2023-12-29 20:18:46 +08:00
SoftFever	fab8b78d69	update locale	2023-12-29 12:08:45 +08:00
SoftFever	63f9b3b1ba	check for new version rework, support "check for stable updates only" mode	2023-12-29 12:04:40 +08:00
SoftFever	f89932f63e	make `exclude_object` off by default	2023-12-29 09:21:49 +08:00
just-trey	a96ed26519	Profile: Anker M5/C first layer consistency improvements (#3321 ) first layer consistency improvments	2023-12-29 00:04:45 +08:00
Thomas	c1bb9ecc43	Fixed typo (#3331 ) * Fixed typo * An other swtitch * Main-i-fold(tm)	2023-12-29 00:02:45 +08:00
Thomas	2901c85ea9	Fixes and simplification of some Creality profiles. (#3315 ) * Fixes and simplification of some Creality profiles. * Set correct support_air_filtration for K1 Max	2023-12-29 00:02:01 +08:00
SoftFever	b51856faff	fix/update locale	2023-12-28 00:23:42 +08:00
SoftFever	87830fdb9d	add more hints	2023-12-28 00:23:42 +08:00
SoftFever	bab1a79511	Fixed a regression bug that --datadir was broken fixed #3191	2023-12-28 00:23:42 +08:00
Ioannis Giannakas	7ab2fabe6a	ENH: Port of "wipe inside before extruding an external perimeter" feature from super slicer (#3287 ) * Wipe Inside at Start of perimeter Co-Authored-By: Merill <6536403+supermerill@users.noreply.github.com> * Cleaned up code and linked it to the wipe on loop parameter * Trigger build * Introduced wipe before external loop parameter. * Removed redundant functions --------- Co-authored-by: Merill <6536403+supermerill@users.noreply.github.com> Co-authored-by: SoftFever <softfeverever@gmail.com>	2023-12-27 11:21:33 +00:00
Thomas	90dd67e4e4	Update OrcaSlicer_fr.po (#3295 ) * Update OrcaSlicer_fr.po Added missing translations. * Update OrcaSlicer_fr.po * Update OrcaSlicer_fr.po * Update OrcaSlicer_fr.po * Update OrcaSlicer_fr.po	2023-12-27 09:31:19 +00:00
Hukete	309979eaff	QIDI: Add two new filaments (#3304 ) * 10-25 Add TPU-95A HF * 1030 Adding Introduction of Chamber Temperature Control Macros(M191) to Notes * 1102 Add ABS-GF10 profile， Remove a extra "s" from the "0.36mm Standard @Qidi XPlus3 0.6 nozzle.json" file * 1106 Add the PA value to some genetic filament profiles * Add new filaments profiles Add new filaments profiles * 1 1 * Add two new filaments Add two new filaments	2023-12-27 09:16:45 +00:00
SoftFever	78c7abe4c2	workaround to solve unwanted zstd dependency on runner (#3298 ) * trigger build * Remove zstd only for dep build * reinstall zstd after building completed	2023-12-27 17:01:12 +08:00
SoftFever	98d8b010c4	downgrade to macos-12 as there are not many macos-13 runner instances availble yet	2023-12-27 17:01:12 +08:00
SoftFever	63351c01da	upgrade to macos 13 (#3289 ) brew uninstall --ignore-dependencies zstd Use local curl remove brew/macport dependency	2023-12-27 17:01:12 +08:00
SoftFever	de8013f211	upgrade libjpeg-turbo to 3.0.1 to properly suppor cross compile	2023-12-27 17:01:12 +08:00
SoftFever	20dab5d996	force to use own glew even if the system has installed one(brew)	2023-12-27 17:01:12 +08:00
SoftFever	9127bed11f	Move DL_CACHE into deps folder. Make cross compile easier	2023-12-27 17:01:12 +08:00
SoftFever	3086875c51	Fixed a bug that spiral_mode_max_xy_smoothing was not hiden when vase is not enabled	2023-12-26 23:41:57 +08:00
SoftFever	2f17c1915d	Fixed a regression that Turkish lang option was missing Fixed #3278	2023-12-26 23:41:56 +08:00
SoftFever	0325e28b50	Layer height can't be zero. Fixed #3268	2023-12-26 23:14:53 +08:00
Lee Jong Mun	9416af2247	kor translation update (#3288 ) fix typo	2023-12-26 21:00:10 +08:00
Ikko Eltociear Ashimine	c02732e11c	Update README.md (#3281 ) bellow -> below	2023-12-26 20:19:41 +08:00
Lee Jong Mun	7e11aed69d	kor translation update (#3272 ) fix type 다리 -> 브릿지 프리셋 -> 사전설정 퇴출 -> 후퇴 갭 -> 간격 인쇄 -> 출력	2023-12-25 04:10:18 +00:00
Olcay ÖREN	cf36ca6ef9	Update Turkish translation (#3270 ) * Update OrcaSlicer_tr.po New English terms were translated into Turkish. * Update OrcaSlicer_tr.po * Turkish language sentences were added. * Turkish words were edited. * Turkish words were edited. * Turkish words were edited. * Turkish words were edited. * Turkish words were edited. * Turkish translation update * Update Turkish translation	2023-12-25 04:09:09 +00:00
SoftFever	9e4c332df2	Don't hide exclude_object option for Marlin/RRF firmwares as Orca now support these firmwares Fixed #3267	2023-12-25 12:00:32 +08:00