bump version to 1.4.2

Signed-off-by: SoftFever <103989404+SoftFever@users.noreply.github.com>
Fix a bug that after load a project, printer connection info is missing
2026-05-17 18:42:24 +00:00 · 2023-01-07 22:07:11 +08:00 · 2023-01-07 22:06:30 +08:00 · 2023-01-07 22:06:30 +08:00 · 2023-01-07 22:06:30 +08:00 · 2023-01-07 11:17:55 +08:00
561 changed files with 24758 additions and 3959 deletions
--- a/.github/workflows/appimage.yml
+++ b/.github/workflows/appimage.yml
@@ -0,0 +1,32 @@
+name: BambuStudio-SoftFever
+
+on: [push, pull_request]
+
+jobs:
+  appimage-builder:
+    name: Linux AppImage Build
+
+    runs-on: ubuntu-latest
+
+    steps:
+      - uses: actions/checkout@v3
+      - name: Install dependencies
+        run: |
+          sudo apt-get update
+          sudo apt-get install cmake libgl1-mesa-dev libgtk-3-dev libxkbcommon-dev libunwind-dev libfuse2 -y
+      - name: Install dependencies from BuildLinux.sh
+        shell: bash
+        run: sudo ./BuildLinux.sh -ur
+      - name: Fix permissions
+        shell: bash
+        run: sudo chown $USER -R ./
+      - name: Build Bambu Studio dependencies using BuildLinux.sh
+        shell: bash
+        run: ./BuildLinux.sh -dsr
+      - name: Build Bambu Studio AppImage using BuildLinux.sh
+        shell: bash
+        run: ./BuildLinux.sh -ir
+      - uses: actions/upload-artifact@v3
+        with:
+          name: AppImage
+          path: './build/BambuStudio_ubu64.AppImage'
--- a/BuildLinux.sh
+++ b/BuildLinux.sh
@@ -28,7 +28,7 @@ function check_available_memory_and_disk() {
 }

 unset name
-while getopts ":dsiuhgb" opt; do
+while getopts ":dsiuhgbr" opt; do
  case ${opt} in
    u )
        UPDATE_LIB="1"
@@ -48,6 +48,9 @@ while getopts ":dsiuhgb" opt; do
    g )
        FOUND_GTK3=""
        ;;
+    r )
+	SKIP_RAM_CHECK="1"
+	;;
    h ) echo "Usage: ./BuildLinux.sh [-i][-u][-d][-s][-b][-g]"
        echo "   -i: Generate appimage (optional)"
        echo "   -g: force gtk2 build"
@@ -55,6 +58,7 @@ while getopts ":dsiuhgb" opt; do
        echo "   -d: build deps (optional)"
        echo "   -s: build bambu-studio (optional)"
        echo "   -u: only update clock & dependency packets (optional and need sudo)"
+	echo "   -r: skip free ram check (low ram compiling)"
        echo "For a first use, you want to 'sudo ./BuildLinux.sh -u'"
        echo "   and then './BuildLinux.sh -dsi'"
        exit 0
@@ -71,6 +75,7 @@ then
    echo "   -d: build deps (optional)"
    echo "   -s: build bambu-studio (optional)"
    echo "   -u: only update clock & dependency packets (optional and need sudo)"
+    echo "   -r: skip free ram check (low ram compiling)"
    echo "For a first use, you want to 'sudo ./BuildLinux.sh -u'"
    echo "   and then './BuildLinux.sh -dsi'"
    exit 0
@@ -153,7 +158,10 @@ then
    mkdir deps/build
 fi

+if ! [[ -n "$SKIP_RAM_CHECK" ]]
+then
 check_available_memory_and_disk
+fi

 if [[ -n "$BUILD_DEPS" ]]
 then
--- a/CMakeLists.txt
+++ b/CMakeLists.txt
@@ -53,7 +53,7 @@ if (APPLE)
    if (CMAKE_MACOSX_BUNDLE)
        set(CMAKE_INSTALL_RPATH @executable_path/../Frameworks)
    endif()
-    set(CMAKE_OSX_DEPLOYMENT_TARGET "10.15" CACHE STRING "Minimum OS X deployment version" FORCE)
+    set(CMAKE_OSX_DEPLOYMENT_TARGET "11.3" CACHE STRING "Minimum OS X deployment version" FORCE)
 endif ()

 # Proposal for C++ unit tests and sandboxes
@@ -704,7 +704,6 @@ elseif (SLIC3R_FHS)
            DESTINATION ${CMAKE_INSTALL_DATAROOTDIR}/icons/hicolor/${SIZE}x${SIZE}/apps RENAME BambuStudio.png
        )
    endforeach()
-    install(DIRECTORY ${SLIC3R_RESOURCES_DIR}/udev/ DESTINATION lib/udev/rules.d)
 elseif (CMAKE_MACOSX_BUNDLE)
    install(DIRECTORY "${SLIC3R_RESOURCES_DIR}/" DESTINATION "${CMAKE_INSTALL_PREFIX}/BambuStudio.app/Contents/resources")
 else ()
--- a/README.md
+++ b/README.md
@@ -1,12 +1,38 @@

 # Bambu Studio - SoftFever
 A modified version of Bambu Studio with many handy features.   
-It's fully compatible with Bambulab X1/X1-C printers.
-It also supports Voron and Prusa MK3S printers.  
+It's fully compatible with Bambulab X1/X1-C/P1P printers.
+It also supports Anycubic, Anker, Creality, Prusa MK3S, RatRig and Voron printers.  
 You can download it here: https://github.com/SoftFever/BambuStudio-SoftFever/releases

 ## BambuStudio SoftFever change notes:

+### [V1.4.1 changes](https://github.com/SoftFever/BambuStudio-SoftFever/releases/tag/v1.4.1):
+- Added a feature for checking and displaying a notification for a new version
+- Added RatRig printer profiles, thanks @erebus04 for working this
+- Added support for the Creality CR-10 Max and Anker M5 printers.
+- Fixed the issue with profile cloud syncing for third-party printers.
+- set inner_wall_acceleration to 5000 for Bambu printers
+- Added support for the first_layer_bed_temperature and first_layer_temperature variables for better compatibility."
+- Fixed a crashing bug when adding text Mac Intel machine
+- QoL improvements for naming logic:
+   1. The filename format is now supported when exporting 3mf files.
+   2. If the project is not defined, the model name will be used as the output name.
+   3. The "Untitled" string will no longer be added if the project name is set.
+   4. The "_plate_0" string has been removed from the file name if there is only one plate.
+
+### [V1.4.0 changes](https://github.com/SoftFever/BambuStudio-SoftFever/releases/tag/v1.4.0):
+- Add Layer Time/Layer time(Log) display (NOTE: need more tweaking work for BBL printers as the layer time is skewed by the preparing time)
+- Add `sandwich`(inner-outer-inner-infill) mode support for Arachne engine.
+- Change default `wall loop` from 2 to 3
+- Fix an issue that the last used printer was not remembered after application restart. (Thanks Bambulab engineers, for the quick response and fixing)
+- Optimized layer height sanity check logic. It will check against `max_layer_height` in the printer settings now. (I can use CHT 1.8 nozzle to print 1.0 mm thick layers now ;) )
+- Add Prusa MINI+ profile
+- expose `bed_exclude_area` parameter to 3rd printers
+- Fix some 3rd party printer related issues introduced in [BambuStudio v01.04.00.17](https://github.com/bambulab/BambuStudio/releases/tag/v01.04.00.17)
+   1.  Can't send sliced files to printers
+   2.  AMS filaments were added to non-Bambulab printers
+   3. Wrong bed setting was applied
 ### [V1.3.4 changes](https://github.com/SoftFever/BambuStudio-SoftFever/releases/tag/v1.3.4):
 1. Add a new printer order - sandwich mode:
 This new order is similar to the outer-wall-first mode in achieving the best dimensional accuracy. This new approach however avoids printing outer walls right after a long travel, which may cause artifacts on the surface in many cases.
@@ -149,12 +175,14 @@ ARC movement are supported by default.

 # Gallery
 ![image](./SoftFever_doc/accelerations.png)
-![image](./SoftFever_doc/printers1.png)  
-![image](./SoftFever_doc/printers2.png)  
-![image](./SoftFever_doc/printers3.png)  
-![image](./SoftFever_doc/printers4.png)  
-![image](./SoftFever_doc/voron.png)  
-
+![image](./SoftFever_doc/BambuLab.png)  
+![image](./SoftFever_doc/Anker.png)  
+![image](./SoftFever_doc/Anycubic.png)  
+![image](./SoftFever_doc/Creality.png)  
+![image](./SoftFever_doc/Prusa.png)  
+![image](./SoftFever_doc/RatRig.png)  
+![image](./SoftFever_doc/Voron_1.png)  
+![image](./SoftFever_doc/Voron_2.png) 


 Image credits: 
--- a/SoftFever_doc/Anker.png
+++ b/SoftFever_doc/Anker.png
--- a/SoftFever_doc/Anycubic.png
+++ b/SoftFever_doc/Anycubic.png
--- a/SoftFever_doc/BambuLab.png
+++ b/SoftFever_doc/BambuLab.png
--- a/SoftFever_doc/Creality.png
+++ b/SoftFever_doc/Creality.png
--- a/SoftFever_doc/Prusa.png
+++ b/SoftFever_doc/Prusa.png
--- a/SoftFever_doc/RatRig.png
+++ b/SoftFever_doc/RatRig.png
--- a/SoftFever_doc/Voron_1.png
+++ b/SoftFever_doc/Voron_1.png
--- a/SoftFever_doc/Voron_2.png
+++ b/SoftFever_doc/Voron_2.png
--- a/SoftFever_doc/printers1.png
+++ b/SoftFever_doc/printers1.png
--- a/SoftFever_doc/printers2.png
+++ b/SoftFever_doc/printers2.png
--- a/SoftFever_doc/printers3.png
+++ b/SoftFever_doc/printers3.png
--- a/SoftFever_doc/printers4.png
+++ b/SoftFever_doc/printers4.png
--- a/bbl/i18n/BambuStudio.pot
+++ b/bbl/i18n/BambuStudio.pot
@@ -8,7 +8,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: PACKAGE VERSION\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-12-13 20:02+0800\n"
+"POT-Creation-Date: 2022-12-24 13:01+0800\n"
 "PO-Revision-Date: YEAR-MO-DA HO:MI+ZONE\n"
 "Last-Translator: FULL NAME <EMAIL@ADDRESS>\n"
 "Language-Team: LANGUAGE <LL@li.org>\n"
@@ -1328,6 +1328,9 @@ msgstr ""
 msgid "An SD card needs to be inserted before printing via LAN."
 msgstr ""

+msgid "Failed to send the print job. Please try again."
+msgstr ""
+
 msgid "Send to Printer failed. Please try again."
 msgstr ""

@@ -1770,8 +1773,8 @@ msgid ""
 msgstr ""

 msgid ""
-"Spiral mode only works when wall loops is 1, \n"
-"support is disabled, top shell layers is 0 and sparse infill density is 0\n"
+"Spiral mode only works when wall loops is 1, support is disabled, top shell "
+"layers is 0, sparse infill density is 0 and timelapse type is traditional"
 msgstr ""

 msgid ""
@@ -3098,6 +3101,12 @@ msgstr ""
 msgid "Undo integration was successful."
 msgstr ""

+msgid "New network plug-in available."
+msgstr ""
+
+msgid "Details"
+msgstr ""
+
 msgid "Undo integration failed."
 msgstr ""

@@ -4229,6 +4238,30 @@ msgid ""
 "model without prime tower. Do you want to enable prime tower?"
 msgstr ""

+msgid ""
+"We have added an experimental style \"Tree Slim\" that features smaller "
+"support volume but weaker strength.\n"
+"We recommand using it with: 0 interface layers, 0 top distance, 2 walls."
+msgstr ""
+
+msgid ""
+"Change these settings automatically? \n"
+"Yes - Change these settings automatically\n"
+"No  - Do not change these settings for me"
+msgstr ""
+
+msgid ""
+"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommand the following "
+"settings: at least 2 interface layers, at least 0.1 top z distance or using "
+"support materials on interface."
+msgstr ""
+
+msgid ""
+"When using support material for the support interface, We recommand the "
+"following settings:\n"
+"0 top distance, 0 interface spacing, concentric pattern."
+msgstr ""
+
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
@@ -4943,6 +4976,17 @@ msgstr ""
 msgid "version %s update information :"
 msgstr ""

+msgid "Network plug-in update"
+msgstr ""
+
+msgid ""
+"Click OK to update the Network plug-in when Bambu Studio launches next time."
+msgstr ""
+
+#, possible-c-format, possible-boost-format
+msgid "A new Network plug-in(%s) available, Do you want to install it?"
+msgstr ""
+
 msgid "New version of Bambu Studio"
 msgstr ""

@@ -5583,20 +5627,6 @@ msgstr ""
 msgid "Bridge flow"
 msgstr ""

-msgid "Top surface flow ratio"
-msgstr ""
-
-msgid "Bottom surface flow ratio"
-msgstr ""
-
-msgid "This factor affects the amount of material for bottom solid infill"
-msgstr ""
-
-msgid ""
-"This factor affects the amount of material for top solid infill. "
-"You can decrease it slightly to have smooth surface finish"
-msgstr ""
-
 msgid ""
 "Decrease this value slightly(for example 0.9) to reduce the amount of "
 "material for bridge, to improve sag"
@@ -5605,19 +5635,11 @@ msgstr ""
 msgid "Only one wall on top surfaces"
 msgstr ""

-msgid "Only one wall on first layer"
-msgstr ""
-
 msgid ""
 "Use only one wall on flat top surface, to give more space to the top infill "
 "pattern"
 msgstr ""

-msgid ""
-"Use only one wall on first layer, to give more space to the bottom infill "
-"pattern"
-msgstr ""
-
 msgid "Slow down for overhang"
 msgstr ""

@@ -6698,7 +6720,8 @@ msgstr ""

 msgid ""
 "normal(auto) and tree(auto) is used to generate support automatically. If "
-"normal or tree is selected, only support enforcers are generated"
+"normal(manual) or tree(manual) is selected, only support enforcers are "
+"generated"
 msgstr ""

 msgid "normal(auto)"
@@ -6707,9 +6730,6 @@ msgstr ""
 msgid "tree(auto)"
 msgstr ""

-msgid "hybrid(auto)"
-msgstr ""
-
 msgid "normal(manual)"
 msgstr ""

@@ -6754,9 +6774,12 @@ msgstr ""
 msgid "The z gap between the bottom support interface and object"
 msgstr ""

+msgid "Support base"
+msgstr ""
+
 msgid ""
-"Filament to print support and raft. \"Default\" means no specific filament "
-"for support and current filament is used"
+"Filament to print support base and raft. \"Default\" means no specific "
+"filament for support and current filament is used"
 msgstr ""

 msgid "Line width of support"
@@ -6807,6 +6830,9 @@ msgstr ""
 msgid "Rectilinear grid"
 msgstr ""

+msgid "Hollow"
+msgstr ""
+
 msgid "Interface pattern"
 msgstr ""

@@ -6834,9 +6860,27 @@ msgstr ""
 msgid "Style"
 msgstr ""

+msgid ""
+"Style and shape of the support. For normal support, projecting the supports "
+"into a regular grid will create more stable supports (default), while snug "
+"support towers will save material and reduce object scarring.\n"
+"For tree support, tight style will merge branches more aggressively and save "
+"a lot of material (default), while hybrid style will create similar "
+"structure to normal support under large flat overhangs."
+msgstr ""
+
 msgid "Snug"
 msgstr ""

+msgid "Tree Slim"
+msgstr ""
+
+msgid "Tree Strong"
+msgstr ""
+
+msgid "Tree Hybrid"
+msgstr ""
+
 msgid "Independent support layer height"
 msgstr ""

--- a/bbl/i18n/de/BambuStudio_de.po
+++ b/bbl/i18n/de/BambuStudio_de.po
--- a/bbl/i18n/en/BambuStudio_en.po
+++ b/bbl/i18n/en/BambuStudio_en.po
--- a/bbl/i18n/es/BambuStudio_es.po
+++ b/bbl/i18n/es/BambuStudio_es.po
@@ -2,16 +2,13 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-12-13 20:02+0800\n"
-"PO-Revision-Date: \n"
-"Last-Translator: \n"
-"Language-Team: \n"
+"POT-Creation-Date: 2022-12-24 13:01+0800\n"
 "Language: es\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Localazy (https://localazy.com)\n"
 "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
-"X-Generator: Poedit 3.1\n"

 msgid "Supports Painting"
 msgstr "Pintando Soportes"
@@ -1392,6 +1389,9 @@ msgstr ""
 msgid "An SD card needs to be inserted before printing via LAN."
 msgstr ""

+msgid "Failed to send the print job. Please try again."
+msgstr ""
+
 msgid "Send to Printer failed. Please try again."
 msgstr ""

@@ -1896,12 +1896,9 @@ msgstr ""
 "El valor se restablecerá a 0."

 msgid ""
-"Spiral mode only works when wall loops is 1, \n"
-"support is disabled, top shell layers is 0 and sparse infill density is 0\n"
+"Spiral mode only works when wall loops is 1, support is disabled, top shell "
+"layers is 0, sparse infill density is 0 and timelapse type is traditional"
 msgstr ""
-"El modo espiral sólo funciona cuando los bucles de pared son 1, \n"
-"el soporte está desactivado, las capas superiores de la cáscara es 0 y la "
-"densidad de relleno dispersa es 0\n"

 msgid ""
 "Change these settings automatically? \n"
@@ -3257,6 +3254,12 @@ msgstr "La integración ha fallado."
 msgid "Undo integration was successful."
 msgstr "La operación de deshacer se ha realizado con éxito."

+msgid "New network plug-in available."
+msgstr ""
+
+msgid "Details"
+msgstr ""
+
 msgid "Undo integration failed."
 msgstr "La operación de deshacer ha fallado."

@@ -3557,11 +3560,11 @@ msgstr "Será mejor que actualices tu software.\n"
 msgid "Newer 3mf version"
 msgstr "Nueva versión 3mf"

-#, c-format, boost-format
+#, fuzzy, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
 "software.\n"
-msgstr ""
+msgstr "\n"

 msgid "The 3mf is not compatible, load geometry data only!"
 msgstr ""
@@ -3844,9 +3847,9 @@ msgid ""
 "on Bambu Studio(windows) or CAD softwares."
 msgstr ""

-#, c-format, boost-format
+#, fuzzy, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s (%s).\n"
-msgstr ""
+msgstr "\n"

 msgid "Switching the language requires application restart.\n"
 msgstr "El cambio de idioma requiere el reinicio de la aplicación.\n"
@@ -4439,6 +4442,30 @@ msgid ""
 "model without prime tower. Do you want to enable prime tower?"
 msgstr ""

+msgid ""
+"We have added an experimental style \"Tree Slim\" that features smaller "
+"support volume but weaker strength.\n"
+"We recommand using it with: 0 interface layers, 0 top distance, 2 walls."
+msgstr ""
+
+msgid ""
+"Change these settings automatically? \n"
+"Yes - Change these settings automatically\n"
+"No  - Do not change these settings for me"
+msgstr ""
+
+msgid ""
+"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommand the following "
+"settings: at least 2 interface layers, at least 0.1 top z distance or using "
+"support materials on interface."
+msgstr ""
+
+msgid ""
+"When using support material for the support interface, We recommand the "
+"following settings:\n"
+"0 top distance, 0 interface spacing, concentric pattern."
+msgstr ""
+
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
@@ -5204,6 +5231,17 @@ msgstr ""
 msgid "version %s update information :"
 msgstr ""

+msgid "Network plug-in update"
+msgstr ""
+
+msgid ""
+"Click OK to update the Network plug-in when Bambu Studio launches next time."
+msgstr ""
+
+#, c-format, boost-format
+msgid "A new Network plug-in(%s) available, Do you want to install it?"
+msgstr ""
+
 msgid "New version of Bambu Studio"
 msgstr "Nueva versión de Bambu Studio"

@@ -5625,9 +5663,9 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr "La altura de la capa no puede superar el diámetro de la boquilla"

-#, c-format, boost-format
+#, fuzzy, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s\n"
-msgstr ""
+msgstr "\n"

 msgid "Generating skirt & brim"
 msgstr "Generando falda y ala"
@@ -7160,10 +7198,9 @@ msgstr "Habilitar la generación de soporte."

 msgid ""
 "normal(auto) and tree(auto) is used to generate support automatically. If "
-"normal or tree is selected, only support enforcers are generated"
+"normal(manual) or tree(manual) is selected, only support enforcers are "
+"generated"
 msgstr ""
-"normal(auto) y tree(auto) se utiliza para generar soporte automáticamente. "
-"Si se selecciona normal o árbol, sólo se generan los soportes"

 msgid "normal(auto)"
 msgstr "normal(auto)"
@@ -7171,9 +7208,6 @@ msgstr "normal(auto)"
 msgid "tree(auto)"
 msgstr "árbol(auto)"

-msgid "hybrid(auto)"
-msgstr "híbrido(auto)"
-
 msgid "normal(manual)"
 msgstr ""

@@ -7220,9 +7254,12 @@ msgstr ""
 msgid "The z gap between the bottom support interface and object"
 msgstr ""

+msgid "Support base"
+msgstr ""
+
 msgid ""
-"Filament to print support and raft. \"Default\" means no specific filament "
-"for support and current filament is used"
+"Filament to print support base and raft. \"Default\" means no specific "
+"filament for support and current filament is used"
 msgstr ""

 msgid "Line width of support"
@@ -7278,6 +7315,9 @@ msgstr "Patrón lineal de apoyo"
 msgid "Rectilinear grid"
 msgstr "Rejilla rectilínea"

+msgid "Hollow"
+msgstr ""
+
 msgid "Interface pattern"
 msgstr "Patrón de interfaz"

@@ -7308,9 +7348,27 @@ msgstr "Velocidad de la asistencia"
 msgid "Style"
 msgstr "Estilo"

+msgid ""
+"Style and shape of the support. For normal support, projecting the supports "
+"into a regular grid will create more stable supports (default), while snug "
+"support towers will save material and reduce object scarring.\n"
+"For tree support, tight style will merge branches more aggressively and save "
+"a lot of material (default), while hybrid style will create similar "
+"structure to normal support under large flat overhangs."
+msgstr ""
+
 msgid "Snug"
 msgstr "Ajustado"

+msgid "Tree Slim"
+msgstr ""
+
+msgid "Tree Strong"
+msgstr ""
+
+msgid "Tree Hybrid"
+msgstr ""
+
 msgid "Independent support layer height"
 msgstr "Altura de la capa de soporte independiente"

@@ -7976,55 +8034,6 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""

-#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
-#~ msgstr "Elija uno o varios archivos (3mf/step/stl/obj/amf):"
-
-#~ msgid "Finish"
-#~ msgstr "Finalizar"
-
-#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
-#~ msgstr "Importar 3MF/STL/STEP/OBJ/AMF"
-
-#~ msgid "Part Cooling"
-#~ msgstr "Refrigeración de Piezas"
-
-#~ msgid "Aux Cooling"
-#~ msgstr "Enfriamiento Auxiliar"
-
-#~ msgid ""
-#~ "Filament to print support and skirt. 0 means no specific filament for "
-#~ "support and current filament is used"
-#~ msgstr ""
-#~ "Filamento para imprimir el soporte y el faldón. 0 significa que no hay "
-#~ "filamento específico para el soporte y se utiliza el filamento actual"
-
-#~ msgid ""
-#~ "Filament to print support interface. 0 means no specific filament for "
-#~ "support interface and current filament is used"
-#~ msgstr ""
-#~ "Filamento para imprimir la interfaz de soporte. 0 significa que no hay "
-#~ "filamento específico para la interfaz de soporte y se utiliza el "
-#~ "filamento actual"
-
-#~ msgid "Repair"
-#~ msgstr "Reparar"
-
-#~ msgid "Repair the model's meshes if it is non-manifold mesh"
-#~ msgstr "Reparar las mallas del modelo si se trata de una malla no plegable"
-
-#~ msgid "Monitoring Recording"
-#~ msgstr "Monitoreo de grabación"
-
-#~ msgid "Tree support with infill"
-#~ msgstr "Soporte para árboles con relleno"
-
-#~ msgid ""
-#~ "This setting specifies whether to add infill inside large hollows of tree "
-#~ "support"
-#~ msgstr ""
-#~ "Este ajuste especifica si se añade relleno dentro de los grandes huecos "
-#~ "del soporte del árbol"
-
 #~ msgid ""
 #~ "\n"
 #~ "%1% is too close to exclusion area, there will be collisions when "
@@ -8067,6 +8076,9 @@ msgstr ""
 #~ "hay objetos seleccionados, sólo orienta los seleccionados.En caso "
 #~ "contrario, orienta todos los objetos del proyecto."

+#~ msgid "Aux Cooling"
+#~ msgstr "Enfriamiento Auxiliar"
+
 #~ msgid "Avoid crossing wall when travel"
 #~ msgstr "Evitar cruzar el muro en los desplazamientos"

@@ -8079,6 +8091,9 @@ msgstr ""
 #~ "este filamento.\n"
 #~ "Esto puede causar el bloqueo de la boquilla y el fracaso de la impresión"

+#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
+#~ msgstr "Elija uno o varios archivos (3mf/step/stl/obj/amf):"
+
 #~ msgid "Clear all"
 #~ msgstr "Borrar todo"

@@ -8189,9 +8204,27 @@ msgstr ""
 #~ msgid "Filament N XX"
 #~ msgstr "Filamento N XX"

+#~ msgid ""
+#~ "Filament to print support and skirt. 0 means no specific filament for "
+#~ "support and current filament is used"
+#~ msgstr ""
+#~ "Filamento para imprimir el soporte y el faldón. 0 significa que no hay "
+#~ "filamento específico para el soporte y se utiliza el filamento actual"
+
+#~ msgid ""
+#~ "Filament to print support interface. 0 means no specific filament for "
+#~ "support interface and current filament is used"
+#~ msgstr ""
+#~ "Filamento para imprimir la interfaz de soporte. 0 significa que no hay "
+#~ "filamento específico para la interfaz de soporte y se utiliza el "
+#~ "filamento actual"
+
 #~ msgid "Filaments Selection"
 #~ msgstr "Selección de filamentos"

+#~ msgid "Finish"
+#~ msgstr "Finalizar"
+
 #~ msgid "Finished"
 #~ msgstr "Terminado"

@@ -8240,6 +8273,9 @@ msgstr ""
 #~ "entrada de auto-organización para evitar la colisión cuando se imprime "
 #~ "objeto por objeto."

+#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
+#~ msgstr "Importar 3MF/STL/STEP/OBJ/AMF"
+
 #~ msgid "In the calibration of extrusion flow"
 #~ msgstr "En la calibración del flujo de extrusión"

@@ -8281,6 +8317,9 @@ msgstr ""
 #~ msgid "Monitoring"
 #~ msgstr "Monitorizando"

+#~ msgid "Monitoring Recording"
+#~ msgstr "Monitoreo de grabación"
+
 #~ msgid "Open"
 #~ msgstr "Abrir"

@@ -8293,6 +8332,9 @@ msgstr ""
 #~ msgid "Output file"
 #~ msgstr "Archivo de salida"

+#~ msgid "Part Cooling"
+#~ msgstr "Refrigeración de Piezas"
+
 #~ msgid "Pause(heated bed temperature error)"
 #~ msgstr "Pausa (error de temperatura de la cama caliente)"

@@ -8376,6 +8418,12 @@ msgstr ""
 #~ msgid "Reload items"
 #~ msgstr "Recarga de objetos"

+#~ msgid "Repair"
+#~ msgstr "Reparar"
+
+#~ msgid "Repair the model's meshes if it is non-manifold mesh"
+#~ msgstr "Reparar las mallas del modelo si se trata de una malla no plegable"
+
 #~ msgid "Report"
 #~ msgstr "Informe"

@@ -8409,6 +8457,15 @@ msgstr ""
 #~ msgid "Spiral mode"
 #~ msgstr "Modo espiral"

+#~ msgid ""
+#~ "Spiral mode only works when wall loops is 1, \n"
+#~ "support is disabled, top shell layers is 0 and sparse infill density is "
+#~ "0\n"
+#~ msgstr ""
+#~ "El modo espiral sólo funciona cuando los bucles de pared son 1, \n"
+#~ "el soporte está desactivado, las capas superiores de la cáscara es 0 y la "
+#~ "densidad de relleno dispersa es 0\n"
+
 #~ msgid "Successfully sent.Will automatically jump to the device page in %s s"
 #~ msgstr ""
 #~ "Enviado con éxito. Saltará automáticamente a la página del dispositivo en "
@@ -8466,6 +8523,13 @@ msgstr ""
 #~ "filamento para ahorrar filamento y disminuir el tiempo de impresión. Los "
 #~ "colores de los objetos se mezclarán como resultado"

+#~ msgid ""
+#~ "This setting specifies whether to add infill inside large hollows of tree "
+#~ "support"
+#~ msgstr ""
+#~ "Este ajuste especifica si se añade relleno dentro de los grandes huecos "
+#~ "del soporte del árbol"
+
 #~ msgid ""
 #~ "This setting stands for how much volume of filament can be melted and "
 #~ "extruded per second. Printing speed is limited by max volumetric speed, "
@@ -8482,6 +8546,9 @@ msgstr ""
 #~ msgid "Translation"
 #~ msgstr "Translación"

+#~ msgid "Tree support with infill"
+#~ msgstr "Soporte para árboles con relleno"
+
 #~ msgid "Unable to create zip file"
 #~ msgstr "No se puede crear un archivo zip"

@@ -8516,9 +8583,20 @@ msgstr ""
 #~ msgid " is too close to others, there will be collisions when printing.\n"
 #~ msgstr " está demasiado cerca de otros, habrá colisiones al imprimir.\n"

+#~ msgid "hybrid(auto)"
+#~ msgstr "híbrido(auto)"
+
 #~ msgid "normal"
 #~ msgstr "normal"

+#~ msgid ""
+#~ "normal(auto) and tree(auto) is used to generate support automatically. If "
+#~ "normal or tree is selected, only support enforcers are generated"
+#~ msgstr ""
+#~ "normal(auto) y tree(auto) se utiliza para generar soporte "
+#~ "automáticamente. Si se selecciona normal o árbol, sólo se generan los "
+#~ "soportes"
+
 #~ msgid "the 3mf is not compatible, load geometry data only!"
 #~ msgstr "el 3mf no es compatible, ¡cargue sólo los datos geométricos!"

--- a/bbl/i18n/fr/BambuStudio_fr.po
+++ b/bbl/i18n/fr/BambuStudio_fr.po
@@ -2,7 +2,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-12-13 20:02+0800\n"
+"POT-Creation-Date: 2022-12-24 13:01+0800\n"
 "PO-Revision-Date: \n"
 "Last-Translator: \n"
 "Language-Team: \n"
@@ -1386,6 +1386,9 @@ msgstr ""
 msgid "An SD card needs to be inserted before printing via LAN."
 msgstr ""

+msgid "Failed to send the print job. Please try again."
+msgstr ""
+
 msgid "Send to Printer failed. Please try again."
 msgstr ""

@@ -1877,12 +1880,9 @@ msgstr ""
 "La valeur sera remise à 0."

 msgid ""
-"Spiral mode only works when wall loops is 1, \n"
-"support is disabled, top shell layers is 0 and sparse infill density is 0\n"
+"Spiral mode only works when wall loops is 1, support is disabled, top shell "
+"layers is 0, sparse infill density is 0 and timelapse type is traditional"
 msgstr ""
-"Le mode spirale ne fonctionne que lorsque les boucles murales sont à 1, \n"
-"le support est désactivé, les couches de coque supérieures sont à 0 et la "
-"densité de remplissage clairsemée est à 0\n"

 msgid ""
 "Change these settings automatically? \n"
@@ -3231,6 +3231,12 @@ msgstr "L'intégration a échoué."
 msgid "Undo integration was successful."
 msgstr "Annuler l'intégration a réussi."

+msgid "New network plug-in available."
+msgstr ""
+
+msgid "Details"
+msgstr ""
+
 msgid "Undo integration failed."
 msgstr "L'annulation de l'intégration a échoué."

@@ -3527,11 +3533,11 @@ msgstr "Vous feriez mieux de mettre à jour votre logiciel.\n"
 msgid "Newer 3mf version"
 msgstr "Nouvelle version 3mf"

-#, c-format, boost-format
+#, fuzzy, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
 "software.\n"
-msgstr ""
+msgstr "\n"

 msgid "The 3mf is not compatible, load geometry data only!"
 msgstr ""
@@ -3814,9 +3820,9 @@ msgid ""
 "on Bambu Studio(windows) or CAD softwares."
 msgstr ""

-#, c-format, boost-format
+#, fuzzy, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s (%s).\n"
-msgstr ""
+msgstr "\n"

 msgid "Switching the language requires application restart.\n"
 msgstr "Le changement de langue nécessite le redémarrage de l'application.\n"
@@ -4310,8 +4316,6 @@ msgid ""
 "Please check the following infomation and click Confirm to continue sending "
 "print:\n"
 msgstr ""
-"Please check the following infomation and click Confirm to continue sending "
-"print:\n"

 msgid ""
 "The printer type used to generate G-code is not the same type as the "
@@ -4415,6 +4419,30 @@ msgid ""
 "model without prime tower. Do you want to enable prime tower?"
 msgstr ""

+msgid ""
+"We have added an experimental style \"Tree Slim\" that features smaller "
+"support volume but weaker strength.\n"
+"We recommand using it with: 0 interface layers, 0 top distance, 2 walls."
+msgstr ""
+
+msgid ""
+"Change these settings automatically? \n"
+"Yes - Change these settings automatically\n"
+"No  - Do not change these settings for me"
+msgstr ""
+
+msgid ""
+"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommand the following "
+"settings: at least 2 interface layers, at least 0.1 top z distance or using "
+"support materials on interface."
+msgstr ""
+
+msgid ""
+"When using support material for the support interface, We recommand the "
+"following settings:\n"
+"0 top distance, 0 interface spacing, concentric pattern."
+msgstr ""
+
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
@@ -5185,6 +5213,17 @@ msgstr ""
 msgid "version %s update information :"
 msgstr ""

+msgid "Network plug-in update"
+msgstr ""
+
+msgid ""
+"Click OK to update the Network plug-in when Bambu Studio launches next time."
+msgstr ""
+
+#, c-format, boost-format
+msgid "A new Network plug-in(%s) available, Do you want to install it?"
+msgstr ""
+
 msgid "New version of Bambu Studio"
 msgstr "Nouvelle version de Bambu Studio"

@@ -5498,7 +5537,7 @@ msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% est trop grand, cela pourrait provoquer des collisions."

 msgid " is too close to others, there may be collisions when printing.\n"
-msgstr " is too close to others, there may be collisions when printing.\n"
+msgstr ""

 msgid ""
 " is too close to exclusion area, there may be collisions when printing.\n"
@@ -5608,9 +5647,9 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr "La hauteur de la couche ne peut pas dépasser le diamètre de la buse"

-#, c-format, boost-format
+#, fuzzy, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s\n"
-msgstr ""
+msgstr "\n"

 msgid "Generating skirt & brim"
 msgstr "Génération jupe et bord"
@@ -7156,11 +7195,9 @@ msgstr "Activer la génération de support."

 msgid ""
 "normal(auto) and tree(auto) is used to generate support automatically. If "
-"normal or tree is selected, only support enforcers are generated"
+"normal(manual) or tree(manual) is selected, only support enforcers are "
+"generated"
 msgstr ""
-"normal(auto) et tree(auto) sont utilisés pour générer automatiquement le "
-"support. Si normal ou arbre est sélectionné, seuls les exécuteurs de support "
-"sont générés"

 msgid "normal(auto)"
 msgstr "normale (auto)"
@@ -7168,9 +7205,6 @@ msgstr "normale (auto)"
 msgid "tree(auto)"
 msgstr "arbre (auto)"

-msgid "hybrid(auto)"
-msgstr "hybride (auto)"
-
 msgid "normal(manual)"
 msgstr ""

@@ -7219,9 +7253,12 @@ msgstr ""
 msgid "The z gap between the bottom support interface and object"
 msgstr ""

+msgid "Support base"
+msgstr ""
+
 msgid ""
-"Filament to print support and raft. \"Default\" means no specific filament "
-"for support and current filament is used"
+"Filament to print support base and raft. \"Default\" means no specific "
+"filament for support and current filament is used"
 msgstr ""

 msgid "Line width of support"
@@ -7276,6 +7313,9 @@ msgstr "Motif de ligne de support"
 msgid "Rectilinear grid"
 msgstr "Grille rectiligne"

+msgid "Hollow"
+msgstr ""
+
 msgid "Interface pattern"
 msgstr "Modèle d'interface"

@@ -7306,9 +7346,27 @@ msgstr "Vitesse pour les supports"
 msgid "Style"
 msgstr "Style"

+msgid ""
+"Style and shape of the support. For normal support, projecting the supports "
+"into a regular grid will create more stable supports (default), while snug "
+"support towers will save material and reduce object scarring.\n"
+"For tree support, tight style will merge branches more aggressively and save "
+"a lot of material (default), while hybrid style will create similar "
+"structure to normal support under large flat overhangs."
+msgstr ""
+
 msgid "Snug"
 msgstr "Confortable"

+msgid "Tree Slim"
+msgstr ""
+
+msgid "Tree Strong"
+msgstr ""
+
+msgid "Tree Hybrid"
+msgstr ""
+
 msgid "Independent support layer height"
 msgstr "Hauteur de la couche de support indépendante"

@@ -7977,56 +8035,6 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""

-#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
-#~ msgstr "Choisissez un ou plusieurs fichiers (3mf/step/stl/obj/amf) :"
-
-#~ msgid "Finish"
-#~ msgstr "Finish"
-
-#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
-#~ msgstr "Importer 3MF/STL/STEP/OBJ/AMF"
-
-#~ msgid "Part Cooling"
-#~ msgstr "Refroidissement des pièces"
-
-#~ msgid "Aux Cooling"
-#~ msgstr "Refroidissement auxiliaire"
-
-#~ msgid ""
-#~ "Filament to print support and skirt. 0 means no specific filament for "
-#~ "support and current filament is used"
-#~ msgstr ""
-#~ "Filament pour imprimer le support et la jupe. 0 signifie qu'aucun "
-#~ "filament spécifique pour le support et le filament actuel est utilisé"
-
-#~ msgid ""
-#~ "Filament to print support interface. 0 means no specific filament for "
-#~ "support interface and current filament is used"
-#~ msgstr ""
-#~ "Filament pour imprimer l'interface de support. 0 signifie qu'aucun "
-#~ "filament spécifique pour l'interface de support et le filament actuel est "
-#~ "utilisé"
-
-#~ msgid "Repair"
-#~ msgstr "Réparation"
-
-#~ msgid "Repair the model's meshes if it is non-manifold mesh"
-#~ msgstr ""
-#~ "Réparer les maillages du modèle s'il s'agit d'un maillage non multiple"
-
-#~ msgid "Monitoring Recording"
-#~ msgstr "Enregistrement de surveillance"
-
-#~ msgid "Tree support with infill"
-#~ msgstr "Support d'arbre avec remplissage"
-
-#~ msgid ""
-#~ "This setting specifies whether to add infill inside large hollows of tree "
-#~ "support"
-#~ msgstr ""
-#~ "Ce paramètre spécifie s'il faut ajouter un remplissage à l'intérieur des "
-#~ "grands creux du support d'arbre"
-
 #~ msgid ""
 #~ "\n"
 #~ "%1% is too close to exclusion area, there will be collisions when "
@@ -8069,6 +8077,9 @@ msgstr ""
 #~ "y a des objets sélectionnés, il oriente uniquement ceux qui sont "
 #~ "sélectionnés. Sinon, il oriente tous les objets du projet."

+#~ msgid "Aux Cooling"
+#~ msgstr "Refroidissement auxiliaire"
+
 #~ msgid "Avoid crossing wall when travel"
 #~ msgstr "Évitez de traverser le mur lorsque vous voyagez"

@@ -8081,6 +8092,9 @@ msgstr ""
 #~ "ce filament. Cela peut entraîner le blocage de la buse et l'échec de "
 #~ "l'impression"

+#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
+#~ msgstr "Choisissez un ou plusieurs fichiers (3mf/step/stl/obj/amf) :"
+
 #~ msgid "Clear all"
 #~ msgstr "Tout effacer"

@@ -8192,9 +8206,27 @@ msgstr ""
 #~ msgid "Filament N XX"
 #~ msgstr "Filament N XX"

+#~ msgid ""
+#~ "Filament to print support and skirt. 0 means no specific filament for "
+#~ "support and current filament is used"
+#~ msgstr ""
+#~ "Filament pour imprimer le support et la jupe. 0 signifie qu'aucun "
+#~ "filament spécifique pour le support et le filament actuel est utilisé"
+
+#~ msgid ""
+#~ "Filament to print support interface. 0 means no specific filament for "
+#~ "support interface and current filament is used"
+#~ msgstr ""
+#~ "Filament pour imprimer l'interface de support. 0 signifie qu'aucun "
+#~ "filament spécifique pour l'interface de support et le filament actuel est "
+#~ "utilisé"
+
 #~ msgid "Filaments Selection"
 #~ msgstr "Sélection de filaments"

+#~ msgid "Finish"
+#~ msgstr "Finish"
+
 #~ msgid "Finished"
 #~ msgstr "Terminé"

@@ -8242,6 +8274,9 @@ msgstr ""
 #~ "entrée de l'auto-arrangement pour éviter les collisions lors de "
 #~ "l'impression objet par objet"

+#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
+#~ msgstr "Importer 3MF/STL/STEP/OBJ/AMF"
+
 #~ msgid "In the calibration of extrusion flow"
 #~ msgstr "Calibrage du flux d'extrusion en cours"

@@ -8283,6 +8318,9 @@ msgstr ""
 #~ msgid "Monitoring"
 #~ msgstr "Surveillance"

+#~ msgid "Monitoring Recording"
+#~ msgstr "Enregistrement de surveillance"
+
 #~ msgid "Open"
 #~ msgstr "Open"

@@ -8295,6 +8333,9 @@ msgstr ""
 #~ msgid "Output file"
 #~ msgstr "Fichier de sortie"

+#~ msgid "Part Cooling"
+#~ msgstr "Refroidissement des pièces"
+
 #~ msgid "Pause(heated bed temperature error)"
 #~ msgstr "Pause (erreur de température du plateau chauffant)"

@@ -8376,6 +8417,13 @@ msgstr ""
 #~ msgid "Reload items"
 #~ msgstr "Recharger les éléments"

+#~ msgid "Repair"
+#~ msgstr "Réparation"
+
+#~ msgid "Repair the model's meshes if it is non-manifold mesh"
+#~ msgstr ""
+#~ "Réparer les maillages du modèle s'il s'agit d'un maillage non multiple"
+
 #~ msgid "Report"
 #~ msgstr "Signaler"

@@ -8409,6 +8457,15 @@ msgstr ""
 #~ msgid "Spiral mode"
 #~ msgstr "Mode spirale"

+#~ msgid ""
+#~ "Spiral mode only works when wall loops is 1, \n"
+#~ "support is disabled, top shell layers is 0 and sparse infill density is "
+#~ "0\n"
+#~ msgstr ""
+#~ "Le mode spirale ne fonctionne que lorsque les boucles murales sont à 1, \n"
+#~ "le support est désactivé, les couches de coque supérieures sont à 0 et la "
+#~ "densité de remplissage clairsemée est à 0\n"
+
 #~ msgid "Successfully sent.Will automatically jump to the device page in %s s"
 #~ msgstr ""
 #~ "Envoyé avec succès. Sautera automatiquement à la page de l&#39;appareil "
@@ -8466,6 +8523,13 @@ msgstr ""
 #~ "filament afin d'économiser du filament et de diminuer le temps "
 #~ "d'impression. Les couleurs des objets seront mélangées en conséquence."

+#~ msgid ""
+#~ "This setting specifies whether to add infill inside large hollows of tree "
+#~ "support"
+#~ msgstr ""
+#~ "Ce paramètre spécifie s'il faut ajouter un remplissage à l'intérieur des "
+#~ "grands creux du support d'arbre"
+
 #~ msgid ""
 #~ "This setting stands for how much volume of filament can be melted and "
 #~ "extruded per second. Printing speed is limited by max volumetric speed, "
@@ -8482,6 +8546,9 @@ msgstr ""
 #~ msgid "Translation"
 #~ msgstr "Traduction"

+#~ msgid "Tree support with infill"
+#~ msgstr "Support d'arbre avec remplissage"
+
 #~ msgid "Unable to create zip file"
 #~ msgstr "Création du fichier zip impossible"

@@ -8518,9 +8585,20 @@ msgstr ""
 #~ "est trop proche des autres, il y aura des collisions lors de "
 #~ "l'impression.\n"

+#~ msgid "hybrid(auto)"
+#~ msgstr "hybride (auto)"
+
 #~ msgid "normal"
 #~ msgstr "Ordinaire"

+#~ msgid ""
+#~ "normal(auto) and tree(auto) is used to generate support automatically. If "
+#~ "normal or tree is selected, only support enforcers are generated"
+#~ msgstr ""
+#~ "normal(auto) et tree(auto) sont utilisés pour générer automatiquement le "
+#~ "support. Si normal ou arbre est sélectionné, seuls les exécuteurs de "
+#~ "support sont générés"
+
 #~ msgid "the 3mf is not compatible, load geometry data only!"
 #~ msgstr ""
 #~ "le 3mf n'est pas compatible, chargez uniquement les données de géométrie !"
--- a/bbl/i18n/hu/BambuStudio_hu.po
+++ b/bbl/i18n/hu/BambuStudio_hu.po
@@ -2,16 +2,13 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-12-13 20:02+0800\n"
-"PO-Revision-Date: \n"
-"Last-Translator: \n"
-"Language-Team: \n"
+"POT-Creation-Date: 2022-12-24 13:01+0800\n"
 "Language: hu\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Localazy (https://localazy.com)\n"
 "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
-"X-Generator: Poedit 3.1\n"

 msgid "Supports Painting"
 msgstr "Támaszok festése"
@@ -1387,6 +1384,9 @@ msgstr ""
 msgid "An SD card needs to be inserted before printing via LAN."
 msgstr "A LAN-on keresztüli nyomtatáshoz helyezz be egy SD kártyát."

+msgid "Failed to send the print job. Please try again."
+msgstr ""
+
 msgid "Send to Printer failed. Please try again."
 msgstr ""

@@ -1892,12 +1892,9 @@ msgstr ""
 "Az érték 0-ra áll vissza."

 msgid ""
-"Spiral mode only works when wall loops is 1, \n"
-"support is disabled, top shell layers is 0 and sparse infill density is 0\n"
+"Spiral mode only works when wall loops is 1, support is disabled, top shell "
+"layers is 0, sparse infill density is 0 and timelapse type is traditional"
 msgstr ""
-"A spirál mód csak akkor működik, ha a falak száma 1,\n"
-"a támaszok ki vannak kapcsolva, a felső rétegek száma 0 és a hiányos "
-"kitöltés sűrűsége 0\n"

 msgid ""
 "Change these settings automatically? \n"
@@ -1965,9 +1962,6 @@ msgid ""
 "Yes - switch to rectilinear pattern automaticlly\n"
 "No  - reset density to default non 100% value automaticlly\n"
 msgstr ""
-"Switch to rectilinear pattern?\n"
-"Yes - switch to rectilinear pattern automaticlly\n"
-"No  - reset density to default non 100% value automaticlly\n"

 msgid "Auto bed leveling"
 msgstr "Automatikus asztalszintezés"
@@ -3261,6 +3255,12 @@ msgstr "Az integráció nem sikerült."
 msgid "Undo integration was successful."
 msgstr "Az integráció visszavonása sikeres volt."

+msgid "New network plug-in available."
+msgstr ""
+
+msgid "Details"
+msgstr ""
+
 msgid "Undo integration failed."
 msgstr "Az integráció visszavonása nem sikerült."

@@ -3559,11 +3559,11 @@ msgstr "Jobb lenne, ha frissítenéd a szoftvert.\n"
 msgid "Newer 3mf version"
 msgstr "Újabb 3mf verzió"

-#, c-format, boost-format
+#, fuzzy, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
 "software.\n"
-msgstr ""
+msgstr "\n"

 msgid "The 3mf is not compatible, load geometry data only!"
 msgstr ""
@@ -3843,9 +3843,9 @@ msgid ""
 "on Bambu Studio(windows) or CAD softwares."
 msgstr ""

-#, c-format, boost-format
+#, fuzzy, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s (%s).\n"
-msgstr ""
+msgstr "\n"

 msgid "Switching the language requires application restart.\n"
 msgstr "A nyelvváltáshoz az alkalmazás újraindítása szükséges.\n"
@@ -4335,10 +4335,6 @@ msgid ""
 "currently selected physical printer. It is recommend to re-slice by "
 "selecting the same printer type.\n"
 msgstr ""
-"The printer type used to generate G-code is not the same type as the "
-"currently selected physical printer. It is recommend to re-slice by "
-"selecting the same printer type.\n"
-"\n"

 #, c-format, boost-format
 msgid "The %s filament is too soft to be used with the AMS"
@@ -4433,6 +4429,30 @@ msgid ""
 "model without prime tower. Do you want to enable prime tower?"
 msgstr ""

+msgid ""
+"We have added an experimental style \"Tree Slim\" that features smaller "
+"support volume but weaker strength.\n"
+"We recommand using it with: 0 interface layers, 0 top distance, 2 walls."
+msgstr ""
+
+msgid ""
+"Change these settings automatically? \n"
+"Yes - Change these settings automatically\n"
+"No  - Do not change these settings for me"
+msgstr ""
+
+msgid ""
+"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommand the following "
+"settings: at least 2 interface layers, at least 0.1 top z distance or using "
+"support materials on interface."
+msgstr ""
+
+msgid ""
+"When using support material for the support interface, We recommand the "
+"following settings:\n"
+"0 top distance, 0 interface spacing, concentric pattern."
+msgstr ""
+
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
@@ -5194,6 +5214,17 @@ msgstr ""
 msgid "version %s update information :"
 msgstr ""

+msgid "Network plug-in update"
+msgstr ""
+
+msgid ""
+"Click OK to update the Network plug-in when Bambu Studio launches next time."
+msgstr ""
+
+#, c-format, boost-format
+msgid "A new Network plug-in(%s) available, Do you want to install it?"
+msgstr ""
+
 msgid "New version of Bambu Studio"
 msgstr "A Bambu Studio új verziója"

@@ -5509,7 +5540,7 @@ msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% túl magas, a nyomtatás során előfordulhatnak ütközések."

 msgid " is too close to others, there may be collisions when printing.\n"
-msgstr " is too close to others, there may be collisions when printing.\n"
+msgstr ""

 msgid ""
 " is too close to exclusion area, there may be collisions when printing.\n"
@@ -5614,9 +5645,9 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr "A rétegmagasság nem lehet nagyobb a fúvóka átmérőjénél."

-#, c-format, boost-format
+#, fuzzy, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s\n"
-msgstr ""
+msgstr "\n"

 msgid "Generating skirt & brim"
 msgstr "Szoknya & perem generálása"
@@ -7148,11 +7179,9 @@ msgstr "Engedélyezi a támasz generálását."

 msgid ""
 "normal(auto) and tree(auto) is used to generate support automatically. If "
-"normal or tree is selected, only support enforcers are generated"
+"normal(manual) or tree(manual) is selected, only support enforcers are "
+"generated"
 msgstr ""
-"A normál (auto), hibrid (auto) és fa (auto) támaszok automatikus "
-"generálására szolgál. Ha normál vagy fa van kiválasztva, akkor csak a támasz "
-"kényszerítők kerülnek legenerálásra."

 msgid "normal(auto)"
 msgstr "normál (auto)"
@@ -7160,9 +7189,6 @@ msgstr "normál (auto)"
 msgid "tree(auto)"
 msgstr "fa (auto)"

-msgid "hybrid(auto)"
-msgstr "hibrid (auto)"
-
 msgid "normal(manual)"
 msgstr ""

@@ -7210,9 +7236,12 @@ msgstr ""
 msgid "The z gap between the bottom support interface and object"
 msgstr ""

+msgid "Support base"
+msgstr ""
+
 msgid ""
-"Filament to print support and raft. \"Default\" means no specific filament "
-"for support and current filament is used"
+"Filament to print support base and raft. \"Default\" means no specific "
+"filament for support and current filament is used"
 msgstr ""

 msgid "Line width of support"
@@ -7267,6 +7296,9 @@ msgstr "A támasz mintázata."
 msgid "Rectilinear grid"
 msgstr "Vonalrács"

+msgid "Hollow"
+msgstr ""
+
 msgid "Interface pattern"
 msgstr "Érintkező felület mintázata"

@@ -7297,9 +7329,27 @@ msgstr "Támaszok sebessége"
 msgid "Style"
 msgstr "Stílus"

+msgid ""
+"Style and shape of the support. For normal support, projecting the supports "
+"into a regular grid will create more stable supports (default), while snug "
+"support towers will save material and reduce object scarring.\n"
+"For tree support, tight style will merge branches more aggressively and save "
+"a lot of material (default), while hybrid style will create similar "
+"structure to normal support under large flat overhangs."
+msgstr ""
+
 msgid "Snug"
 msgstr "Szoros"

+msgid "Tree Slim"
+msgstr ""
+
+msgid "Tree Strong"
+msgstr ""
+
+msgid "Tree Hybrid"
+msgstr ""
+
 msgid "Independent support layer height"
 msgstr "Független támasz rétegmagassága"

@@ -7960,63 +8010,6 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""

-#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
-#~ msgstr "Válassz ki egy vagy több fájlt (3mf/step/stl/obj/amf):"
-
-#~ msgid "Finish"
-#~ msgstr "Kész"
-
-#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
-#~ msgstr "3MF/STL/STEP/OBJ/AMF importálása"
-
-#~ msgid "Part Cooling"
-#~ msgstr "Tárgyhűtés"
-
-#~ msgid "Aux Cooling"
-#~ msgstr "Segédhűtés"
-
-#~ msgid ""
-#~ "Filament to print support and skirt. 0 means no specific filament for "
-#~ "support and current filament is used"
-#~ msgstr ""
-#~ "Filament a támasz és perem nyomtatásához. A 0 azt jelenti, hogy nincs "
-#~ "erre külön kijelölt filament és a jelenleg használt kerül felhasználásra"
-
-#~ msgid ""
-#~ "Filament to print support interface. 0 means no specific filament for "
-#~ "support interface and current filament is used"
-#~ msgstr ""
-#~ "Filament a támasz érintkező felületének nyomtatásához. A 0 azt jelenti, "
-#~ "hogy nincs erre külön kijelölt filament és a jelenleg használt kerül "
-#~ "felhasználásra"
-
-#~ msgid "Repair"
-#~ msgstr "Javítás"
-
-#~ msgid "Repair the model's meshes if it is non-manifold mesh"
-#~ msgstr "Megjavítja a modell hálóit, ha azok hibásak"
-
-#~ msgid "Heat the nozzle to target temperature"
-#~ msgstr "Fúvóka felmelegítése a kívánt hőmérsékletre"
-
-#~ msgid ""
-#~ "Successfully sent. Will automatically jump to the device page in %s s"
-#~ msgstr ""
-#~ "Sikeresen elküldve. Az eszköz oldala automatikusan megjelenik %s mp belül"
-
-#~ msgid "Monitoring Recording"
-#~ msgstr "Felvétel monitorozása"
-
-#~ msgid "Tree support with infill"
-#~ msgstr "Fa támasz kitöltéssel"
-
-#~ msgid ""
-#~ "This setting specifies whether to add infill inside large hollows of tree "
-#~ "support"
-#~ msgstr ""
-#~ "Ez a beállítás határozza meg, hogy a fa támasz nagyobb üregeiben legyen-e "
-#~ "kitöltés."
-
 #~ msgid ""
 #~ "\n"
 #~ "%1% is too close to exclusion area, there will be collisions when "
@@ -8060,6 +8053,9 @@ msgstr ""
 #~ "ellenkező esetben az aktuális projektben lévő összes objektumot "
 #~ "orientálja."

+#~ msgid "Aux Cooling"
+#~ msgstr "Segédhűtés"
+
 #~ msgid "Avoid crossing wall when travel"
 #~ msgstr "Falak elkerülése mozgáskor"

@@ -8072,6 +8068,9 @@ msgstr ""
 #~ "hőmérséklete.\n"
 #~ "Ez a fúvóka eltömődését és nyomtatási hibákat okozhat"

+#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
+#~ msgstr "Válassz ki egy vagy több fájlt (3mf/step/stl/obj/amf):"
+
 #~ msgid "Clear all"
 #~ msgstr "Összes törlése"

@@ -8182,9 +8181,27 @@ msgstr ""
 #~ msgid "Filament N XX"
 #~ msgstr "Filament N XX"

+#~ msgid ""
+#~ "Filament to print support and skirt. 0 means no specific filament for "
+#~ "support and current filament is used"
+#~ msgstr ""
+#~ "Filament a támasz és perem nyomtatásához. A 0 azt jelenti, hogy nincs "
+#~ "erre külön kijelölt filament és a jelenleg használt kerül felhasználásra"
+
+#~ msgid ""
+#~ "Filament to print support interface. 0 means no specific filament for "
+#~ "support interface and current filament is used"
+#~ msgstr ""
+#~ "Filament a támasz érintkező felületének nyomtatásához. A 0 azt jelenti, "
+#~ "hogy nincs erre külön kijelölt filament és a jelenleg használt kerül "
+#~ "felhasználásra"
+
 #~ msgid "Filaments Selection"
 #~ msgstr "Filamentek kiválasztása"

+#~ msgid "Finish"
+#~ msgstr "Kész"
+
 #~ msgid "Finished"
 #~ msgstr "Kész"

@@ -8223,6 +8240,9 @@ msgstr ""
 #~ "Fúvóka felfűtése a\n"
 #~ "célhőmérsékletre"

+#~ msgid "Heat the nozzle to target temperature"
+#~ msgstr "Fúvóka felmelegítése a kívánt hőmérsékletre"
+
 #~ msgid "Height:"
 #~ msgstr "Magasság:"

@@ -8234,6 +8254,9 @@ msgstr ""
 #~ "automatikus elrendezéshez van használva az ütközések elkerülése "
 #~ "érdekében, amikor a nyomtatás tárgyanként történik."

+#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
+#~ msgstr "3MF/STL/STEP/OBJ/AMF importálása"
+
 #~ msgid "In the calibration of extrusion flow"
 #~ msgstr "Az anyagáramlás kalibrálásában"

@@ -8275,6 +8298,9 @@ msgstr ""
 #~ msgid "Monitoring"
 #~ msgstr "Monitorozás"

+#~ msgid "Monitoring Recording"
+#~ msgstr "Felvétel monitorozása"
+
 #~ msgid "Open"
 #~ msgstr "Open"

@@ -8287,6 +8313,9 @@ msgstr ""
 #~ msgid "Output file"
 #~ msgstr "Kimeneti fájl"

+#~ msgid "Part Cooling"
+#~ msgstr "Tárgyhűtés"
+
 #~ msgid "Pause(heated bed temperature error)"
 #~ msgstr "Szünet (tárgyasztal hőmérséklet hiba)"

@@ -8370,6 +8399,12 @@ msgstr ""
 #~ msgid "Reload items"
 #~ msgstr "Tárgyak újbóli betöltése"

+#~ msgid "Repair"
+#~ msgstr "Javítás"
+
+#~ msgid "Repair the model's meshes if it is non-manifold mesh"
+#~ msgstr "Megjavítja a modell hálóit, ha azok hibásak"
+
 #~ msgid "Report"
 #~ msgstr "Jelentés"

@@ -8403,11 +8438,25 @@ msgstr ""
 #~ msgid "Spiral mode"
 #~ msgstr "Spirál/Váza mód"

+#~ msgid ""
+#~ "Spiral mode only works when wall loops is 1, \n"
+#~ "support is disabled, top shell layers is 0 and sparse infill density is "
+#~ "0\n"
+#~ msgstr ""
+#~ "A spirál mód csak akkor működik, ha a falak száma 1,\n"
+#~ "a támaszok ki vannak kapcsolva, a felső rétegek száma 0 és a hiányos "
+#~ "kitöltés sűrűsége 0\n"
+
 #~ msgid "Successfully sent.Will automatically jump to the device page in %s s"
 #~ msgstr ""
 #~ "Sikeresen elküldve. Automatikus átváltás a készülék oldalára %s mp-en "
 #~ "belül"

+#~ msgid ""
+#~ "Successfully sent. Will automatically jump to the device page in %s s"
+#~ msgstr ""
+#~ "Sikeresen elküldve. Az eszköz oldala automatikusan megjelenik %s mp belül"
+
 #~ msgid ""
 #~ "Support layer uses layer height independent with object layer. This is to "
 #~ "support custom support gap,but may cause extra filament switches if "
@@ -8459,6 +8508,13 @@ msgstr ""
 #~ "nyomtatási idő csökkentése és némi filament megtakarításának érdekében. "
 #~ "Az objektum színei ennek eredményeképpen keveredni fognak."

+#~ msgid ""
+#~ "This setting specifies whether to add infill inside large hollows of tree "
+#~ "support"
+#~ msgstr ""
+#~ "Ez a beállítás határozza meg, hogy a fa támasz nagyobb üregeiben legyen-e "
+#~ "kitöltés."
+
 #~ msgid ""
 #~ "This setting stands for how much volume of filament can be melted and "
 #~ "extruded per second. Printing speed is limited by max volumetric speed, "
@@ -8477,6 +8533,9 @@ msgstr ""
 #~ msgid "Translation"
 #~ msgstr "Fordítás"

+#~ msgid "Tree support with infill"
+#~ msgstr "Fa támasz kitöltéssel"
+
 #~ msgid "Unable to create zip file"
 #~ msgstr "Nem sikerült létrehozni a zip fájlt"

@@ -8514,9 +8573,20 @@ msgstr ""
 #~ " túl közel van a tiltott területhez, a nyomtatás során előfordulhatnak "
 #~ "ütközések.\n"

+#~ msgid "hybrid(auto)"
+#~ msgstr "hibrid (auto)"
+
 #~ msgid "normal"
 #~ msgstr "normál"

+#~ msgid ""
+#~ "normal(auto) and tree(auto) is used to generate support automatically. If "
+#~ "normal or tree is selected, only support enforcers are generated"
+#~ msgstr ""
+#~ "A normál (auto), hibrid (auto) és fa (auto) támaszok automatikus "
+#~ "generálására szolgál. Ha normál vagy fa van kiválasztva, akkor csak a "
+#~ "támasz kényszerítők kerülnek legenerálásra."
+
 #~ msgid "the 3mf is not compatible, load geometry data only!"
 #~ msgstr "A 3mf nem kompatibilis, csak geometriai adatok kerülnek betöltésre!"

--- a/bbl/i18n/it/BambuStudio_it.po
+++ b/bbl/i18n/it/BambuStudio_it.po
--- a/bbl/i18n/nl/BambuStudio_nl.po
+++ b/bbl/i18n/nl/BambuStudio_nl.po
@@ -2,16 +2,13 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-12-13 20:02+0800\n"
-"PO-Revision-Date: \n"
-"Last-Translator: \n"
-"Language-Team: \n"
+"POT-Creation-Date: 2022-12-24 13:01+0800\n"
 "Language: nl\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Localazy (https://localazy.com)\n"
 "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
-"X-Generator: Poedit 3.1\n"

 msgid "Supports Painting"
 msgstr "Onderteuning (Support) tekenen"
@@ -1393,6 +1390,9 @@ msgstr ""
 msgid "An SD card needs to be inserted before printing via LAN."
 msgstr ""

+msgid "Failed to send the print job. Please try again."
+msgstr ""
+
 msgid "Send to Printer failed. Please try again."
 msgstr ""

@@ -1898,12 +1898,9 @@ msgstr ""
 "De waarde wordt teruggezet naar 0."

 msgid ""
-"Spiral mode only works when wall loops is 1, \n"
-"support is disabled, top shell layers is 0 and sparse infill density is 0\n"
+"Spiral mode only works when wall loops is 1, support is disabled, top shell "
+"layers is 0, sparse infill density is 0 and timelapse type is traditional"
 msgstr ""
-"Spiraal modus werkt alleen indien indien er 1 wall gekozen is, \n"
-"support uitgeschakeld is, er 0 top layers gekozen zijn en de vulling "
-"dichtheid 0 is\n"

 msgid ""
 "Change these settings automatically? \n"
@@ -2891,11 +2888,6 @@ msgid ""
 "2. The Filament presets\n"
 "3. The Printer presets\n"
 msgstr ""
-"Do you want to synchronize your personal data from Bambu Cloud? \n"
-"It contains the following information:\n"
-"1. The Process presets\n"
-"2. The Filament presets\n"
-"3. The Printer presets\n"

 msgid "Synchronization"
 msgstr "Synchronisatie"
@@ -3259,6 +3251,12 @@ msgstr "Integratie is mislukt."
 msgid "Undo integration was successful."
 msgstr "Het ongedaan maken van de integratie is gelukt."

+msgid "New network plug-in available."
+msgstr ""
+
+msgid "Details"
+msgstr ""
+
 msgid "Undo integration failed."
 msgstr "Het ongedaan maken van de integratie is mislukt."

@@ -3565,11 +3563,11 @@ msgstr "U dient de software te upgraden.\n"
 msgid "Newer 3mf version"
 msgstr "Nieuwere versie 3mf"

-#, c-format, boost-format
+#, fuzzy, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
 "software.\n"
-msgstr ""
+msgstr "\n"

 msgid "The 3mf is not compatible, load geometry data only!"
 msgstr ""
@@ -3851,9 +3849,9 @@ msgid ""
 "on Bambu Studio(windows) or CAD softwares."
 msgstr ""

-#, c-format, boost-format
+#, fuzzy, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s (%s).\n"
-msgstr ""
+msgstr "\n"

 msgid "Switching the language requires application restart.\n"
 msgstr ""
@@ -4447,6 +4445,30 @@ msgid ""
 "model without prime tower. Do you want to enable prime tower?"
 msgstr ""

+msgid ""
+"We have added an experimental style \"Tree Slim\" that features smaller "
+"support volume but weaker strength.\n"
+"We recommand using it with: 0 interface layers, 0 top distance, 2 walls."
+msgstr ""
+
+msgid ""
+"Change these settings automatically? \n"
+"Yes - Change these settings automatically\n"
+"No  - Do not change these settings for me"
+msgstr ""
+
+msgid ""
+"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommand the following "
+"settings: at least 2 interface layers, at least 0.1 top z distance or using "
+"support materials on interface."
+msgstr ""
+
+msgid ""
+"When using support material for the support interface, We recommand the "
+"following settings:\n"
+"0 top distance, 0 interface spacing, concentric pattern."
+msgstr ""
+
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
@@ -5215,6 +5237,17 @@ msgstr ""
 msgid "version %s update information :"
 msgstr ""

+msgid "Network plug-in update"
+msgstr ""
+
+msgid ""
+"Click OK to update the Network plug-in when Bambu Studio launches next time."
+msgstr ""
+
+#, c-format, boost-format
+msgid "A new Network plug-in(%s) available, Do you want to install it?"
+msgstr ""
+
 msgid "New version of Bambu Studio"
 msgstr "Nieuwe versie van Bambu Studio"

@@ -5635,9 +5668,9 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr "De laaghoogte kan niet groter zijn dan de diameter van de nozzle"

-#, c-format, boost-format
+#, fuzzy, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s\n"
-msgstr ""
+msgstr "\n"

 msgid "Generating skirt & brim"
 msgstr "Skirt en brim worden gegenereerd"
@@ -7180,11 +7213,9 @@ msgstr "Dit maakt het genereren van support mogelijk."

 msgid ""
 "normal(auto) and tree(auto) is used to generate support automatically. If "
-"normal or tree is selected, only support enforcers are generated"
+"normal(manual) or tree(manual) is selected, only support enforcers are "
+"generated"
 msgstr ""
-"normal (auto), hybride (auto) en tree (auto) worden gebruikt om automatisch "
-"support te genereren. Als normaal of tree is geselecteerd, worden alleen "
-"vereiste support gegenereerd."

 msgid "normal(auto)"
 msgstr "Normaal (automatisch)"
@@ -7192,9 +7223,6 @@ msgstr "Normaal (automatisch)"
 msgid "tree(auto)"
 msgstr "tree(auto)"

-msgid "hybrid(auto)"
-msgstr "Hybride (automatisch)"
-
 msgid "normal(manual)"
 msgstr ""

@@ -7242,9 +7270,12 @@ msgstr ""
 msgid "The z gap between the bottom support interface and object"
 msgstr ""

+msgid "Support base"
+msgstr ""
+
 msgid ""
-"Filament to print support and raft. \"Default\" means no specific filament "
-"for support and current filament is used"
+"Filament to print support base and raft. \"Default\" means no specific "
+"filament for support and current filament is used"
 msgstr ""

 msgid "Line width of support"
@@ -7300,6 +7331,9 @@ msgstr "Dit is het lijnpatroon voor support."
 msgid "Rectilinear grid"
 msgstr "Rechtlijnig raster"

+msgid "Hollow"
+msgstr ""
+
 msgid "Interface pattern"
 msgstr "Interfacepatroon"

@@ -7330,9 +7364,27 @@ msgstr "Dit is de snelheid voor het printen van support."
 msgid "Style"
 msgstr "Stijl"

+msgid ""
+"Style and shape of the support. For normal support, projecting the supports "
+"into a regular grid will create more stable supports (default), while snug "
+"support towers will save material and reduce object scarring.\n"
+"For tree support, tight style will merge branches more aggressively and save "
+"a lot of material (default), while hybrid style will create similar "
+"structure to normal support under large flat overhangs."
+msgstr ""
+
 msgid "Snug"
 msgstr "Nauwsluitend"

+msgid "Tree Slim"
+msgstr ""
+
+msgid "Tree Strong"
+msgstr ""
+
+msgid "Tree Hybrid"
+msgstr ""
+
 msgid "Independent support layer height"
 msgstr "Onafhankelijke support laaghoogte"

@@ -7998,54 +8050,6 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""

-#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
-#~ msgstr "Kies een of meer bestanden (3mf/step/stl/obj/amf):"
-
-#~ msgid "Finish"
-#~ msgstr "Klaar"
-
-#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
-#~ msgstr "Importeer 3MF/STL/STEP/OBJ/AMF"
-
-#~ msgid "Part Cooling"
-#~ msgstr "Koeling van de printkop"
-
-#~ msgid "Aux Cooling"
-#~ msgstr "Extra koeling"
-
-#~ msgid ""
-#~ "Filament to print support and skirt. 0 means no specific filament for "
-#~ "support and current filament is used"
-#~ msgstr ""
-#~ "Filament om randen (skirt) en support te printen. Indien u kiest voor 0 "
-#~ "dan is er geen specifiek filament en wordt het huidige filament gebruikt"
-
-#~ msgid ""
-#~ "Filament to print support interface. 0 means no specific filament for "
-#~ "support interface and current filament is used"
-#~ msgstr ""
-#~ "Filament om support te printen. Indien u kiest voor 0 dan is er geen "
-#~ "specifiek filament en wordt het huidige filament gebruikt"
-
-#~ msgid "Repair"
-#~ msgstr "Repareren"
-
-#~ msgid "Repair the model's meshes if it is non-manifold mesh"
-#~ msgstr "Repareer de meshes van het model als ze niet-manifold zijn."
-
-#~ msgid "Monitoring Recording"
-#~ msgstr "Monitoring en opname"
-
-#~ msgid "Tree support with infill"
-#~ msgstr "Tree support met vulling"
-
-#~ msgid ""
-#~ "This setting specifies whether to add infill inside large hollows of tree "
-#~ "support"
-#~ msgstr ""
-#~ "Deze instelling geeft aan of er opvulling moet worden toegevoegd in grote "
-#~ "holtes van de tree support."
-
 #~ msgid ""
 #~ "\n"
 #~ "%1% is too close to exclusion area, there will be collisions when "
@@ -8088,6 +8092,9 @@ msgstr ""
 #~ "deze georiënteert. Anders worden alle objecten op de huidige project "
 #~ "georiënteert."

+#~ msgid "Aux Cooling"
+#~ msgstr "Extra koeling"
+
 #~ msgid "Avoid crossing wall when travel"
 #~ msgstr "Vermijd wanden tijdens het verplaatsen"

@@ -8100,6 +8107,9 @@ msgstr ""
 #~ "filament. Hierdoor kan de nozzle verstopt raken en kan het printen "
 #~ "mislukken"

+#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
+#~ msgstr "Kies een of meer bestanden (3mf/step/stl/obj/amf):"
+
 #~ msgid "Clear all"
 #~ msgstr "Alles wissen"

@@ -8210,9 +8220,26 @@ msgstr ""
 #~ msgid "Filament N XX"
 #~ msgstr "Filament N XX"

+#~ msgid ""
+#~ "Filament to print support and skirt. 0 means no specific filament for "
+#~ "support and current filament is used"
+#~ msgstr ""
+#~ "Filament om randen (skirt) en support te printen. Indien u kiest voor 0 "
+#~ "dan is er geen specifiek filament en wordt het huidige filament gebruikt"
+
+#~ msgid ""
+#~ "Filament to print support interface. 0 means no specific filament for "
+#~ "support interface and current filament is used"
+#~ msgstr ""
+#~ "Filament om support te printen. Indien u kiest voor 0 dan is er geen "
+#~ "specifiek filament en wordt het huidige filament gebruikt"
+
 #~ msgid "Filaments Selection"
 #~ msgstr "Filaments selectie"

+#~ msgid "Finish"
+#~ msgstr "Klaar"
+
 #~ msgid "Finished"
 #~ msgstr "Voltooid"

@@ -8258,6 +8285,9 @@ msgstr ""
 #~ "voor automatisch rangschikken om botsingen te voorkomen bij  object voor "
 #~ "object printen."

+#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
+#~ msgstr "Importeer 3MF/STL/STEP/OBJ/AMF"
+
 #~ msgid "In the calibration of extrusion flow"
 #~ msgstr "Bij de kalibratie van de extrusieflow"

@@ -8299,6 +8329,9 @@ msgstr ""
 #~ msgid "Monitoring"
 #~ msgstr "Monitoren"

+#~ msgid "Monitoring Recording"
+#~ msgstr "Monitoring en opname"
+
 #~ msgid "Open"
 #~ msgstr "Open"

@@ -8311,6 +8344,9 @@ msgstr ""
 #~ msgid "Output file"
 #~ msgstr "Bestand weergeven"

+#~ msgid "Part Cooling"
+#~ msgstr "Koeling van de printkop"
+
 #~ msgid "Pause(heated bed temperature error)"
 #~ msgstr "Pauze (fout in temperatuur printbed)"

@@ -8391,6 +8427,12 @@ msgstr ""
 #~ msgid "Reload items"
 #~ msgstr "Onderdelen opnieuw laden"

+#~ msgid "Repair"
+#~ msgstr "Repareren"
+
+#~ msgid "Repair the model's meshes if it is non-manifold mesh"
+#~ msgstr "Repareer de meshes van het model als ze niet-manifold zijn."
+
 #~ msgid "Report"
 #~ msgstr "Rapport"

@@ -8424,6 +8466,15 @@ msgstr ""
 #~ msgid "Spiral mode"
 #~ msgstr "Spiraal modus"

+#~ msgid ""
+#~ "Spiral mode only works when wall loops is 1, \n"
+#~ "support is disabled, top shell layers is 0 and sparse infill density is "
+#~ "0\n"
+#~ msgstr ""
+#~ "Spiraal modus werkt alleen indien indien er 1 wall gekozen is, \n"
+#~ "support uitgeschakeld is, er 0 top layers gekozen zijn en de vulling "
+#~ "dichtheid 0 is\n"
+
 #~ msgid "Successfully sent.Will automatically jump to the device page in %s s"
 #~ msgstr ""
 #~ "Succesvol verzonden. Automatisch terug naar de apparaatpagina in %s s"
@@ -8478,6 +8529,13 @@ msgstr ""
 #~ "om filament te besparen en de print tijd te verkorten. De kleuren van de "
 #~ "objecten worden gemengd als resultaat"

+#~ msgid ""
+#~ "This setting specifies whether to add infill inside large hollows of tree "
+#~ "support"
+#~ msgstr ""
+#~ "Deze instelling geeft aan of er opvulling moet worden toegevoegd in grote "
+#~ "holtes van de tree support."
+
 #~ msgid ""
 #~ "This setting stands for how much volume of filament can be melted and "
 #~ "extruded per second. Printing speed is limited by max volumetric speed, "
@@ -8494,6 +8552,9 @@ msgstr ""
 #~ msgid "Translation"
 #~ msgstr "Vertaling"

+#~ msgid "Tree support with infill"
+#~ msgstr "Tree support met vulling"
+
 #~ msgid "Unable to create zip file"
 #~ msgstr "Kan het zip-bestand niet aanmaken"

@@ -8531,9 +8592,20 @@ msgstr ""
 #~ " bevindt zich te dichtbij andere objecten, er zullen botsingen optreden "
 #~ "tijdens het printen.\n"

+#~ msgid "hybrid(auto)"
+#~ msgstr "Hybride (automatisch)"
+
 #~ msgid "normal"
 #~ msgstr "Normaal"

+#~ msgid ""
+#~ "normal(auto) and tree(auto) is used to generate support automatically. If "
+#~ "normal or tree is selected, only support enforcers are generated"
+#~ msgstr ""
+#~ "normal (auto), hybride (auto) en tree (auto) worden gebruikt om "
+#~ "automatisch support te genereren. Als normaal of tree is geselecteerd, "
+#~ "worden alleen vereiste support gegenereerd."
+
 #~ msgid "the 3mf is not compatible, load geometry data only!"
 #~ msgstr ""
 #~ "Het 3mf bestand is niet compatibel, enkel de geometrische data wordt "
--- a/bbl/i18n/sv/BambuStudio_sv.po
+++ b/bbl/i18n/sv/BambuStudio_sv.po
@@ -2,16 +2,13 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Bambu Studio\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-12-13 20:02+0800\n"
-"PO-Revision-Date: \n"
-"Last-Translator: \n"
-"Language-Team: \n"
+"POT-Creation-Date: 2022-12-24 13:01+0800\n"
 "Language: sv\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
+"X-Generator: Localazy (https://localazy.com)\n"
 "Plural-Forms: nplurals=2; plural=(n==1) ? 0 : 1;\n"
-"X-Generator: Poedit 3.1\n"

 msgid "Supports Painting"
 msgstr "Färgläggning av Support"
@@ -1373,6 +1370,9 @@ msgstr ""
 msgid "An SD card needs to be inserted before printing via LAN."
 msgstr ""

+msgid "Failed to send the print job. Please try again."
+msgstr ""
+
 msgid "Send to Printer failed. Please try again."
 msgstr ""

@@ -1868,11 +1868,9 @@ msgstr ""
 "Värdet kommer att återställas till 0."

 msgid ""
-"Spiral mode only works when wall loops is 1, \n"
-"support is disabled, top shell layers is 0 and sparse infill density is 0\n"
+"Spiral mode only works when wall loops is 1, support is disabled, top shell "
+"layers is 0, sparse infill density is 0 and timelapse type is traditional"
 msgstr ""
-"Spiral läge fungerar bara när vägg antalet är 1,\n"
-"support är inaktiverad, top lager är 0 och låg ifyllnads densitet är 0\n"

 msgid ""
 "Change these settings automatically? \n"
@@ -1938,9 +1936,6 @@ msgid ""
 "Yes - switch to rectilinear pattern automaticlly\n"
 "No  - reset density to default non 100% value automaticlly\n"
 msgstr ""
-"Switch to rectilinear pattern?\n"
-"Yes - switch to rectilinear pattern automaticlly\n"
-"No  - reset density to default non 100% value automaticlly\n"

 msgid "Auto bed leveling"
 msgstr "Auto justera byggplattan"
@@ -3225,6 +3220,12 @@ msgstr "Integrationen misslyckades."
 msgid "Undo integration was successful."
 msgstr "Återställande av integrationen lyckades."

+msgid "New network plug-in available."
+msgstr ""
+
+msgid "Details"
+msgstr ""
+
 msgid "Undo integration failed."
 msgstr "Återställande av integrationen misslyckades."

@@ -3521,11 +3522,11 @@ msgstr "Uppdatera mjukvaran.\n"
 msgid "Newer 3mf version"
 msgstr "Nyare 3mf version"

-#, c-format, boost-format
+#, fuzzy, c-format, boost-format
 msgid ""
 "The 3mf's version %s is newer than %s's version %s, Suggest to upgrade your "
 "software.\n"
-msgstr ""
+msgstr "\n"

 msgid "The 3mf is not compatible, load geometry data only!"
 msgstr ""
@@ -3798,9 +3799,9 @@ msgid ""
 "on Bambu Studio(windows) or CAD softwares."
 msgstr ""

-#, c-format, boost-format
+#, fuzzy, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s (%s).\n"
-msgstr ""
+msgstr "\n"

 msgid "Switching the language requires application restart.\n"
 msgstr "Byte av språk krävs för omstart.\n"
@@ -4378,6 +4379,30 @@ msgid ""
 "model without prime tower. Do you want to enable prime tower?"
 msgstr ""

+msgid ""
+"We have added an experimental style \"Tree Slim\" that features smaller "
+"support volume but weaker strength.\n"
+"We recommand using it with: 0 interface layers, 0 top distance, 2 walls."
+msgstr ""
+
+msgid ""
+"Change these settings automatically? \n"
+"Yes - Change these settings automatically\n"
+"No  - Do not change these settings for me"
+msgstr ""
+
+msgid ""
+"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommand the following "
+"settings: at least 2 interface layers, at least 0.1 top z distance or using "
+"support materials on interface."
+msgstr ""
+
+msgid ""
+"When using support material for the support interface, We recommand the "
+"following settings:\n"
+"0 top distance, 0 interface spacing, concentric pattern."
+msgstr ""
+
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
@@ -5136,6 +5161,17 @@ msgstr ""
 msgid "version %s update information :"
 msgstr ""

+msgid "Network plug-in update"
+msgstr ""
+
+msgid ""
+"Click OK to update the Network plug-in when Bambu Studio launches next time."
+msgstr ""
+
+#, c-format, boost-format
+msgid "A new Network plug-in(%s) available, Do you want to install it?"
+msgstr ""
+
 msgid "New version of Bambu Studio"
 msgstr "Ny version av Bambu Studio"

@@ -5444,13 +5480,11 @@ msgid "%1% is too tall, and collisions will be caused."
 msgstr "%1% är för hög, och kollisioner kommer att uppstå."

 msgid " is too close to others, there may be collisions when printing.\n"
-msgstr " is too close to others, there may be collisions when printing.\n"
+msgstr ""

 msgid ""
 " is too close to exclusion area, there may be collisions when printing.\n"
 msgstr ""
-" is too close to exclusion area, there may be collisions when printing.\n"
-"\n"

 msgid "Prime Tower"
 msgstr "Prime Torn"
@@ -5543,9 +5577,9 @@ msgstr ""
 msgid "Layer height cannot exceed nozzle diameter"
 msgstr "Lagerhöjden kan inte överstiga nozzel diametern"

-#, c-format, boost-format
+#, fuzzy, c-format, boost-format
 msgid "Plate %d: %s does not support filament %s\n"
-msgstr ""
+msgstr "\n"

 msgid "Generating skirt & brim"
 msgstr "Skapar Skirt & Brim"
@@ -7048,11 +7082,9 @@ msgstr "Aktivera support generering."

 msgid ""
 "normal(auto) and tree(auto) is used to generate support automatically. If "
-"normal or tree is selected, only support enforcers are generated"
+"normal(manual) or tree(manual) is selected, only support enforcers are "
+"generated"
 msgstr ""
-"normal(auto), hybrid(auto) och tree(auto) används för att skapa support "
-"automatiskt. Om normal eller tree är vald, kommer endast tvingande support "
-"skapas"

 msgid "normal(auto)"
 msgstr "normal (auto)"
@@ -7060,9 +7092,6 @@ msgstr "normal (auto)"
 msgid "tree(auto)"
 msgstr "träd(auto)"

-msgid "hybrid(auto)"
-msgstr "hybrid(auto)"
-
 msgid "normal(manual)"
 msgstr ""

@@ -7110,9 +7139,12 @@ msgstr ""
 msgid "The z gap between the bottom support interface and object"
 msgstr ""

+msgid "Support base"
+msgstr ""
+
 msgid ""
-"Filament to print support and raft. \"Default\" means no specific filament "
-"for support and current filament is used"
+"Filament to print support base and raft. \"Default\" means no specific "
+"filament for support and current filament is used"
 msgstr ""

 msgid "Line width of support"
@@ -7166,6 +7198,9 @@ msgstr "Supportens linje mönster"
 msgid "Rectilinear grid"
 msgstr "Rät linjärt nät"

+msgid "Hollow"
+msgstr ""
+
 msgid "Interface pattern"
 msgstr "Gränssnitts mönster"

@@ -7196,9 +7231,27 @@ msgstr "Support hastighet"
 msgid "Style"
 msgstr "Stil"

+msgid ""
+"Style and shape of the support. For normal support, projecting the supports "
+"into a regular grid will create more stable supports (default), while snug "
+"support towers will save material and reduce object scarring.\n"
+"For tree support, tight style will merge branches more aggressively and save "
+"a lot of material (default), while hybrid style will create similar "
+"structure to normal support under large flat overhangs."
+msgstr ""
+
 msgid "Snug"
 msgstr "Tight"

+msgid "Tree Slim"
+msgstr ""
+
+msgid "Tree Strong"
+msgstr ""
+
+msgid "Tree Hybrid"
+msgstr ""
+
 msgid "Independent support layer height"
 msgstr "Oberoende support lagerhöjd"

@@ -7853,54 +7906,6 @@ msgid ""
 "density to improve the strength of the model?"
 msgstr ""

-#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
-#~ msgstr "Välj en eller flera filer (3mf/step/stl/obj/amf):"
-
-#~ msgid "Finish"
-#~ msgstr "Slutför"
-
-#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
-#~ msgstr "Importera 3MF/STL/STEP/OBJ/AMF"
-
-#~ msgid "Part Cooling"
-#~ msgstr "Del Kylning"
-
-#~ msgid "Aux Cooling"
-#~ msgstr "Extra Kylning"
-
-#~ msgid ""
-#~ "Filament to print support and skirt. 0 means no specific filament for "
-#~ "support and current filament is used"
-#~ msgstr ""
-#~ "Filament för att skriva ut support och skirt med. 0 betyder inget "
-#~ "speciellt filament för support och nuvarande filament används"
-
-#~ msgid ""
-#~ "Filament to print support interface. 0 means no specific filament for "
-#~ "support interface and current filament is used"
-#~ msgstr ""
-#~ "Support filament för utskrift. 0 betyder att inget specifikt filament för "
-#~ "support gränssnitt och nuvarande filament används"
-
-#~ msgid "Repair"
-#~ msgstr "Reparera"
-
-#~ msgid "Repair the model's meshes if it is non-manifold mesh"
-#~ msgstr "Reparera modellens mesh om den inte är mångfaldig"
-
-#~ msgid "Monitoring Recording"
-#~ msgstr "Övervaknings Inspelning"
-
-#~ msgid "Tree support with infill"
-#~ msgstr "Tree support med ifyllnad"
-
-#~ msgid ""
-#~ "This setting specifies whether to add infill inside large hollows of tree "
-#~ "support"
-#~ msgstr ""
-#~ "Inställningen bestämmer om det ska läggas till ifyllnad i stora hålrum av "
-#~ "tree support"
-
 #~ msgid ""
 #~ "\n"
 #~ "%1% is too close to exclusion area, there will be collisions when "
@@ -7938,6 +7943,9 @@ msgstr ""
 #~ "Auto placera valda objekt eller alla objekt. Om det finns valda objekt så "
 #~ "placeras endast dem. Alternativt så placeras alla objekt i projektet."

+#~ msgid "Aux Cooling"
+#~ msgstr "Extra Kylning"
+
 #~ msgid "Avoid crossing wall when travel"
 #~ msgstr "Undvik väggar vid förflyttning"

@@ -7950,6 +7958,9 @@ msgstr ""
 #~ "filament.\n"
 #~ "Detta kan orsaka att nozzeln blockeras och utskriften misslyckas"

+#~ msgid "Choose one or more files (3mf/step/stl/obj/amf):"
+#~ msgstr "Välj en eller flera filer (3mf/step/stl/obj/amf):"
+
 #~ msgid "Clear all"
 #~ msgstr "Rensa allt"

@@ -8059,9 +8070,26 @@ msgstr ""
 #~ msgid "Filament N XX"
 #~ msgstr "Filament N XX"

+#~ msgid ""
+#~ "Filament to print support and skirt. 0 means no specific filament for "
+#~ "support and current filament is used"
+#~ msgstr ""
+#~ "Filament för att skriva ut support och skirt med. 0 betyder inget "
+#~ "speciellt filament för support och nuvarande filament används"
+
+#~ msgid ""
+#~ "Filament to print support interface. 0 means no specific filament for "
+#~ "support interface and current filament is used"
+#~ msgstr ""
+#~ "Support filament för utskrift. 0 betyder att inget specifikt filament för "
+#~ "support gränssnitt och nuvarande filament används"
+
 #~ msgid "Filaments Selection"
 #~ msgstr "Filament Val"

+#~ msgid "Finish"
+#~ msgstr "Slutför"
+
 #~ msgid "Finished"
 #~ msgstr "Färdig"

@@ -8110,6 +8138,9 @@ msgstr ""
 #~ "auto-placering för att undvika kollision när man skriver ut objekt för "
 #~ "objekt"

+#~ msgid "Import 3MF/STL/STEP/OBJ/AMF"
+#~ msgstr "Importera 3MF/STL/STEP/OBJ/AMF"
+
 #~ msgid "In the calibration of extrusion flow"
 #~ msgstr "Vid kalibrering av extruderingsflödet"

@@ -8151,6 +8182,9 @@ msgstr ""
 #~ msgid "Monitoring"
 #~ msgstr "Övervakar"

+#~ msgid "Monitoring Recording"
+#~ msgstr "Övervaknings Inspelning"
+
 #~ msgid "Open"
 #~ msgstr "Öppna"

@@ -8163,6 +8197,9 @@ msgstr ""
 #~ msgid "Output file"
 #~ msgstr "Utdatafil"

+#~ msgid "Part Cooling"
+#~ msgstr "Del Kylning"
+
 #~ msgid "Pause(heated bed temperature error)"
 #~ msgstr "Paus (temperaturfel i byggplattan)"

@@ -8245,6 +8282,12 @@ msgstr ""
 #~ msgid "Reload items"
 #~ msgstr "Ladda om objekten"

+#~ msgid "Repair"
+#~ msgstr "Reparera"
+
+#~ msgid "Repair the model's meshes if it is non-manifold mesh"
+#~ msgstr "Reparera modellens mesh om den inte är mångfaldig"
+
 #~ msgid "Report"
 #~ msgstr "Rapportera"

@@ -8278,6 +8321,14 @@ msgstr ""
 #~ msgid "Spiral mode"
 #~ msgstr "Spiral läge"

+#~ msgid ""
+#~ "Spiral mode only works when wall loops is 1, \n"
+#~ "support is disabled, top shell layers is 0 and sparse infill density is "
+#~ "0\n"
+#~ msgstr ""
+#~ "Spiral läge fungerar bara när vägg antalet är 1,\n"
+#~ "support är inaktiverad, top lager är 0 och låg ifyllnads densitet är 0\n"
+
 #~ msgid "Successfully sent.Will automatically jump to the device page in %s s"
 #~ msgstr ""
 #~ "Framgångsrikt skickat. Kommer automatiskt att hoppa till enhetssidan om "
@@ -8331,6 +8382,13 @@ msgstr ""
 #~ "byte för att spara filament och minska utskriftstiden. Objektens färger "
 #~ "blandas som ett resultat"

+#~ msgid ""
+#~ "This setting specifies whether to add infill inside large hollows of tree "
+#~ "support"
+#~ msgstr ""
+#~ "Inställningen bestämmer om det ska läggas till ifyllnad i stora hålrum av "
+#~ "tree support"
+
 #~ msgid ""
 #~ "This setting stands for how much volume of filament can be melted and "
 #~ "extruded per second. Printing speed is limited by max volumetric speed, "
@@ -8347,6 +8405,9 @@ msgstr ""
 #~ msgid "Translation"
 #~ msgstr "Översättning"

+#~ msgid "Tree support with infill"
+#~ msgstr "Tree support med ifyllnad"
+
 #~ msgid "Unable to create zip file"
 #~ msgstr "Det gick inte att skapa zip-fil"

@@ -8379,9 +8440,20 @@ msgstr ""
 #~ msgid " is too close to others, there will be collisions when printing.\n"
 #~ msgstr " för tätt inpå andra, utskriften kolliderar.\n"

+#~ msgid "hybrid(auto)"
+#~ msgstr "hybrid(auto)"
+
 #~ msgid "normal"
 #~ msgstr "normal"

+#~ msgid ""
+#~ "normal(auto) and tree(auto) is used to generate support automatically. If "
+#~ "normal or tree is selected, only support enforcers are generated"
+#~ msgstr ""
+#~ "normal(auto), hybrid(auto) och tree(auto) används för att skapa support "
+#~ "automatiskt. Om normal eller tree är vald, kommer endast tvingande "
+#~ "support skapas"
+
 #~ msgid "the 3mf is not compatible, load geometry data only!"
 #~ msgstr "3mf ej kompatibel, laddar endast geometrin !"

--- a/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
+++ b/bbl/i18n/zh_cn/BambuStudio_zh_CN.po
@@ -6,8 +6,8 @@ msgid ""
 msgstr ""
 "Project-Id-Version: Slic3rPE\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2022-12-13 20:02+0800\n"
-"PO-Revision-Date: 2022-12-13 20:18+0800\n"
+"POT-Creation-Date: 2022-12-24 13:01+0800\n"
+"PO-Revision-Date: 2022-12-22 17:47+0800\n"
 "Last-Translator: Jiang Yue <maze1024@gmail.com>\n"
 "Language-Team: \n"
 "Language: zh_CN\n"
@@ -15,7 +15,7 @@ msgstr ""
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
 "Plural-Forms: nplurals=1; plural=0;\n"
-"X-Generator: Poedit 3.0.1\n"
+"X-Generator: Poedit 3.1\n"

 msgid "Supports Painting"
 msgstr "支撑绘制"
@@ -708,7 +708,7 @@ msgid "Set filament for selected items"
 msgstr "设置所选项的耗材丝"

 msgid "Default"
-msgstr "默认"
+msgstr "缺省"

 #, c-format, boost-format
 msgid "Filament %d"
@@ -1824,10 +1824,11 @@ msgstr ""
 "这个数值将被重置为0。"

 msgid ""
-"Spiral mode only works when wall loops is 1, \n"
-"support is disabled, top shell layers is 0 and sparse infill density is 0\n"
+"Spiral mode only works when wall loops is 1, support is disabled, top shell "
+"layers is 0, sparse infill density is 0 and timelapse type is traditional"
 msgstr ""
-"旋转模式只能在外墙层数为1，关闭支撑，顶层层数为0，稀疏填充密度为0时有效。\n"
+"旋转模式只能在外墙层数为1，关闭支撑，顶层层数为0，稀疏填充密度为0，传统延时摄"
+"影时有效"

 msgid ""
 "Change these settings automatically? \n"
@@ -1983,10 +1984,10 @@ msgid "Unknown"
 msgstr "未定义"

 msgid "Fatal"
-msgstr ""
+msgstr "致命"

 msgid "Serious"
-msgstr ""
+msgstr "严重"

 msgid "Common"
 msgstr ""
@@ -2479,7 +2480,7 @@ msgid "No"
 msgstr "否"

 msgid " will be closed before creating a new model. Do you want to continue?"
-msgstr "会被关闭以创建新模型。是否继续？"
+msgstr "将会被关闭以创建新模型。是否继续？"

 msgid "Slice"
 msgstr "切片"
@@ -2724,6 +2725,39 @@ msgstr "在3D场景中显示对象名称"
 msgid "Preferences"
 msgstr "偏好设置"

+msgid "Line method - DDE"
+msgstr "划线方法 - 近程"
+
+msgid "Line method - Bowden"
+msgstr "划线方法 - 远程"
+
+msgid "Tower method - DDE"
+msgstr "打印塔方法 - 近程"
+
+msgid "Tower method - Bowden"
+msgstr "打印塔方法 - 远程"
+
+msgid "Presure/Linear Advance"
+msgstr "压力提前"
+
+msgid "Flow rate"
+msgstr "流量"
+
+msgid "Pass 1"
+msgstr "粗调"
+
+msgid "Pass 2"
+msgstr "细调"
+
+msgid "Tutorial"
+msgstr "教程"
+
+msgid "Layer Time"
+msgstr "层时间"
+
+msgid "Layer Time (log)"
+msgstr "层时间（对数）"
+
 msgid "View"
 msgstr "视图"

@@ -3196,6 +3230,12 @@ msgstr "集成失败。"
 msgid "Undo integration was successful."
 msgstr "集成取消成功。"

+msgid "New network plug-in available."
+msgstr "新的网络插件可用。"
+
+msgid "Details"
+msgstr "详情"
+
 msgid "Undo integration failed."
 msgstr "集成取消失败。"

@@ -4353,6 +4393,38 @@ msgid ""
 msgstr ""
 "平滑模式的延时摄影需要擦料塔，否则打印件上可能会有瑕疵。您想打开擦料塔吗？"

+msgid ""
+"We have added an experimental style \"Tree Slim\" that features smaller "
+"support volume but weaker strength.\n"
+"We recommand using it with: 0 interface layers, 0 top distance, 2 walls."
+msgstr ""
+"我们加入一个新的实验性风格\\\"苗条树\\\"，它使用更少的支撑体积，但强度可能较"
+"弱。\n"
+"\"因此我们推荐以下参数：接触层数为0，顶部Z距离为0，墙层数为2。"
+
+msgid ""
+"Change these settings automatically? \n"
+"Yes - Change these settings automatically\n"
+"No  - Do not change these settings for me"
+msgstr ""
+"自动调整这些设置？\n"
+"是 - 自动调整这些设置\n"
+"否 - 不用为我调整这些设置"
+
+msgid ""
+"For \"Tree Strong\" and \"Tree Hybrid\" styles, we recommand the following "
+"settings: at least 2 interface layers, at least 0.1 top z distance or using "
+"support materials on interface."
+msgstr ""
+
+msgid ""
+"When using support material for the support interface, We recommand the "
+"following settings:\n"
+"0 top distance, 0 interface spacing, concentric pattern."
+msgstr ""
+"当使用支撑材料作为支撑面，我们推荐以下设置：\n"
+"顶部Z距离为0， 支撑面线距为0，接触面图案为同。"
+
 msgid ""
 "When recording timelapse without toolhead, it is recommended to add a "
 "\"Timelapse Wipe Tower\" \n"
@@ -5081,6 +5153,17 @@ msgstr "更新说明"
 msgid "version %s update information :"
 msgstr "版本 %s 更新信息"

+msgid "Network plug-in update"
+msgstr "网络插件升级"
+
+msgid ""
+"Click OK to update the Network plug-in when Bambu Studio launches next time."
+msgstr "点击OK将在Bambu Studio下次启动之后自动升级网络插件"
+
+#, c-format, boost-format
+msgid "A new Network plug-in(%s) available, Do you want to install it?"
+msgstr "新的网络插件(%s) 可用，您是否需要安装它？"
+
 msgid "New version of Bambu Studio"
 msgstr "新版本的Bambu Studio"

@@ -6975,10 +7058,11 @@ msgstr "开启支撑生成。"

 msgid ""
 "normal(auto) and tree(auto) is used to generate support automatically. If "
-"normal or tree is selected, only support enforcers are generated"
+"normal(manual) or tree(manual) is selected, only support enforcers are "
+"generated"
 msgstr ""
-"普通（自动）和树状（自动）用于自动生成支撑体。如果选择普通或树状，仅会在支撑"
-"强制面上生成支撑。"
+"普通（自动）和树状（自动）用于自动生成支撑体。如果选择普通（手动）或树状（手"
+"动），仅会在支撑强制面上生成支撑。"

 msgid "normal(auto)"
 msgstr "普通(自动)"
@@ -6986,9 +7070,6 @@ msgstr "普通(自动)"
 msgid "tree(auto)"
 msgstr "树状(自动)"

-msgid "hybrid(auto)"
-msgstr "混合(自动)"
-
 msgid "normal(manual)"
 msgstr "普通(手动)"

@@ -7033,10 +7114,14 @@ msgstr "底部Z距离"
 msgid "The z gap between the bottom support interface and object"
 msgstr "支撑生成于模型表面时，支撑面底部和模型之间的z间隙"

+msgid "Support base"
+msgstr "支撑主体"
+
 msgid ""
-"Filament to print support and raft. \"Default\" means no specific filament "
-"for support and current filament is used"
-msgstr "打印支撑和筏层的耗材丝。“默认”代表不指定特定的耗材丝，并使用当前耗材"
+"Filament to print support base and raft. \"Default\" means no specific "
+"filament for support and current filament is used"
+msgstr ""
+"打印支撑主体和筏层的耗材丝。\"缺省\"代表不指定特定的耗材丝，并使用当前耗材"

 msgid "Line width of support"
 msgstr "支撑的线宽"
@@ -7051,7 +7136,7 @@ msgstr "使用圈形走线覆盖顶部接触面。默认关闭。"
 msgid ""
 "Filament to print support interface. \"Default\" means no specific filament "
 "for support interface and current filament is used"
-msgstr "打印支撑接触面的耗材丝。“默认”代表不指定特定的耗材丝，并使用当前耗材"
+msgstr "打印支撑接触面的耗材丝。\"缺省\"代表不指定特定的耗材丝，并使用当前耗材"

 msgid "Top interface layers"
 msgstr "顶部接触面层数"
@@ -7086,6 +7171,9 @@ msgstr "支撑走线图案"
 msgid "Rectilinear grid"
 msgstr "直线网格"

+msgid "Hollow"
+msgstr "空心"
+
 msgid "Interface pattern"
 msgstr "支撑面图案"

@@ -7115,9 +7203,27 @@ msgstr "支撑打印速度"
 msgid "Style"
 msgstr "样式"

+msgid ""
+"Style and shape of the support. For normal support, projecting the supports "
+"into a regular grid will create more stable supports (default), while snug "
+"support towers will save material and reduce object scarring.\n"
+"For tree support, tight style will merge branches more aggressively and save "
+"a lot of material (default), while hybrid style will create similar "
+"structure to normal support under large flat overhangs."
+msgstr ""
+
 msgid "Snug"
 msgstr "紧贴"

+msgid "Tree Slim"
+msgstr "苗条树"
+
+msgid "Tree Strong"
+msgstr "粗壮树"
+
+msgid "Tree Hybrid"
+msgstr "混合树"
+
 msgid "Independent support layer height"
 msgstr "支撑独立层高"

@@ -7841,6 +7947,30 @@ msgstr ""
 "提高强度\n"
 "你知道吗？你可以使用更多的墙层数和更高的疏散填充密度来提高模型的强度。"

+#~ msgid ""
+#~ "normal(auto) and tree(auto) is used to generate support automatically. If "
+#~ "normal or tree is selected, only support enforcers are generated"
+#~ msgstr ""
+#~ "普通（自动）和树状（自动）用于自动生成支撑体。如果选择普通或树状，仅会在支"
+#~ "撑强制面上生成支撑。"
+
+#~ msgid "hybrid(auto)"
+#~ msgstr "混合(自动)"
+
+#~ msgid ""
+#~ "Filament to print support and raft. \"Default\" means no specific "
+#~ "filament for support and current filament is used"
+#~ msgstr ""
+#~ "打印支撑和筏层的耗材丝。\"缺省\"代表不指定特定的耗材丝，并使用当前耗材"
+
+#~ msgid ""
+#~ "Spiral mode only works when wall loops is 1, \n"
+#~ "support is disabled, top shell layers is 0 and sparse infill density is "
+#~ "0\n"
+#~ msgstr ""
+#~ "旋转模式只能在外墙层数为1，关闭支撑，顶层层数为0，稀疏填充密度为0时有"
+#~ "效。\n"
+
 #~ msgid ""
 #~ "When sparse infill density is low, the internal solid infill or internal "
 #~ "bridge may have no archor at the end of line. This cause falling and bad "
--- a/build_release.bat
+++ b/build_release.bat
@@ -3,12 +3,12 @@ cd deps
 mkdir build
 cd build
 set DEPS=%CD%/BambuStudio_dep
-cmake ../ -G "Visual Studio 16 2019" -DDESTDIR="%CD%/BambuStudio_dep" -DCMAKE_BUILD_TYPE=Release
-cmake --build . --config Release --target ALL_BUILD -- -m
+@REM cmake ../ -G "Visual Studio 16 2019" -DDESTDIR="%CD%/BambuStudio_dep" -DCMAKE_BUILD_TYPE=Release
+@REM cmake --build . --config Release --target ALL_BUILD -- -m

 cd %WP%
 mkdir build 
 cd build
 cmake .. -G "Visual Studio 16 2019" -DBBL_RELEASE_TO_PUBLIC=1 -DCMAKE_PREFIX_PATH="%DEPS%/usr/local" -DCMAKE_INSTALL_PREFIX="./BambuStudio-SoftFever" -DCMAKE_BUILD_TYPE=Release -DWIN10SDK_PATH="C:/Program Files (x86)/Windows Kits/10/Include/10.0.19041.0"
-cmake --build . --config Release --target ALL_BUILD -- -m
-cmake --build . --target install --config Release
+@REM cmake --build . --config Release --target ALL_BUILD -- -m
+@REM cmake --build . --target install --config Release
--- a/build_release_macos.sh
+++ b/build_release_macos.sh
@@ -1,5 +1,4 @@
 #!/bin/sh
-
 WD="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
 cd $WD/deps
 mkdir -p build
@@ -7,14 +6,22 @@ cd build
 DEPS=$PWD/BambuStudio_dep
 mkdir -p $DEPS
 cmake ../ -DDESTDIR="$DEPS" -DOPENSSL_ARCH="darwin64-$(uname -m)-cc" -DCMAKE_BUILD_TYPE=Release
-make -j10
+cmake --build . --config Release --target all 

 cd $WD
 mkdir -p build
 cd build
-cmake .. -DBBL_RELEASE_TO_PUBLIC=1 -DCMAKE_PREFIX_PATH="$DEPS/usr/local" -DCMAKE_INSTALL_PREFIX="$PWD/BambuStudio-SoftFever" -DCMAKE_BUILD_TYPE=Release -DCMAKE_MACOSX_RPATH=ON -DCMAKE_INSTALL_RPATH="$DEPS/usr/local" -DCMAKE_MACOSX_BUNDLE=ON
-cmake --build . --config Release --target all -j10
-cmake --build . --target install --config Release -j10
+cmake .. -GXcode -DBBL_RELEASE_TO_PUBLIC=1 -DCMAKE_PREFIX_PATH="$DEPS/usr/local" -DCMAKE_INSTALL_PREFIX="$PWD/BambuStudio-SoftFever" -DCMAKE_BUILD_TYPE=Release -DCMAKE_MACOSX_RPATH=ON -DCMAKE_INSTALL_RPATH="$DEPS/usr/local" -DCMAKE_MACOSX_BUNDLE=ON
+cmake --build . --config Release --target ALL_BUILD 
+mkdir -p BambuStudio-SoftFever
 cd BambuStudio-SoftFever
-cp -r bin/BambuStudio.app/Contents/MacOS BambuStudio.app/Contents
-cp -r bin/BambuStudio.app/Contents/Info.plist BambuStudio.app/Contents/
+rm -r ./BambuStudio-SoftFever.app
+cp -pR ../src/Release/BambuStudio.app ./BambuStudio-SoftFever.app
+resources_path=$(readlink ./BambuStudio-SoftFever.app/Contents/Resources)
+rm ./BambuStudio-SoftFever.app/Contents/Resources
+cp -R $resources_path ./BambuStudio-SoftFever.app/Contents/Resources
+# extract version
+ver=$(grep '^#define SoftFever_VERSION' ../src/libslic3r/libslic3r_version.h | cut -d ' ' -f3)
+ver="${ver//\"}"
+zip -FSr BambuStudio-SoftFever_V${ver}_Mac_$(uname -m).zip BambuStudio-SoftFever.app
+
--- a/cmake/modules/FindTBB.cmake.in
+++ b/cmake/modules/FindTBB.cmake.in
@@ -293,7 +293,7 @@ if(NOT TBB_FOUND)
  # Create targets
  ##################################

-  if(NOT CMAKE_VERSION VERSION_LESS 3.0 AND TBB_FOUND)
+  if(NOT CMAKE_VERSION VERSION_LESS 3.0 AND TBB_FOUND AND NOT TARGET TBB::tbb)
    add_library(TBB::tbb UNKNOWN IMPORTED)
    set_target_properties(TBB::tbb PROPERTIES
          INTERFACE_COMPILE_DEFINITIONS "${TBB_DEFINITIONS}"
--- a/deps/Boost/Boost.cmake
+++ b/deps/Boost/Boost.cmake
@@ -28,6 +28,9 @@ elseif (CMAKE_CXX_COMPILER_ID STREQUAL "MSVC")
    elseif (MSVC_VERSION LESS 1930)
    # 1920-1929 = VS 16.0 (v142 toolset)
        set(_boost_toolset "msvc-14.2")
+    elseif (MSVC_VERSION LESS 1940)
+    # 1930-1939 = VS 17.0 (v143 toolset)
+        set(_boost_toolset "msvc-14.3")
    else ()
        message(FATAL_ERROR "Unsupported MSVC version")
    endif ()
--- a/deps/CMakeLists.txt
+++ b/deps/CMakeLists.txt
@@ -117,7 +117,7 @@ if (MSVC)
    endif ()
 elseif (APPLE)
    message("OS X SDK Path: ${CMAKE_OSX_SYSROOT}")
-    set(CMAKE_OSX_DEPLOYMENT_TARGET "10.15" CACHE STRING "Minimum OS X deployment version" FORCE)
+    set(CMAKE_OSX_DEPLOYMENT_TARGET "11.3" CACHE STRING "Minimum OS X deployment version" FORCE)
    if (CMAKE_OSX_DEPLOYMENT_TARGET)
        set(DEP_OSX_TARGET "${CMAKE_OSX_DEPLOYMENT_TARGET}")
        message("OS X Deployment Target: ${DEP_OSX_TARGET}")
--- a/deps/deps-windows.cmake
+++ b/deps/deps-windows.cmake
@@ -15,6 +15,10 @@ elseif (MSVC_VERSION LESS 1930)
 # 1920-1929 = VS 16.0 (v142 toolset)
    set(DEP_VS_VER "16")
    set(DEP_BOOST_TOOLSET "msvc-14.2")
+elseif (MSVC_VERSION LESS 1940)
+# 1930-1939 = VS 17.0 (v143 toolset)
+    set(DEP_VS_VER "17")
+    set(DEP_BOOST_TOOLSET "msvc-14.3")
 else ()
    message(FATAL_ERROR "Unsupported MSVC version")
 endif ()
--- a/deps/wxWidgets/wxWidgets.cmake
+++ b/deps/wxWidgets/wxWidgets.cmake
@@ -1,6 +1,7 @@
 set(_wx_git_tag v3.1.5)

 set(_wx_toolkit "")
+set(_wx_glcanvas_egl "")
 if(CMAKE_SYSTEM_NAME STREQUAL "Linux")
    set(_gtk_ver 2)
    if (DEP_WX_GTK3)
@@ -8,6 +9,7 @@ if(CMAKE_SYSTEM_NAME STREQUAL "Linux")
    endif ()
    set(_wx_toolkit "-DwxBUILD_TOOLKIT=gtk${_gtk_ver}")
    set(_wx_private_font "-DwxUSE_PRIVATE_FONTS=1")
+    set(_wx_glcanvas_egl "-DwxUSE_GLCANVAS_EGL=OFF")
 else ()
    set(_wx_private_font "-DwxUSE_PRIVATE_FONTS=0")
 endif()
@@ -49,6 +51,7 @@ bambustudio_add_cmake_project(wxWidgets
        -DwxUSE_LIBJPEG=sys
        -DwxUSE_LIBTIFF=sys
        -DwxUSE_EXPAT=sys
+	${_wx_glcanvas_egl}
 )

 if (MSVC)
--- a/resources/Icon.icns
+++ b/resources/Icon.icns
--- a/resources/calib/PresureAdvnace/pressure_advance_test.stl
+++ b/resources/calib/PresureAdvnace/pressure_advance_test.stl
--- a/resources/calib/PresureAdvnace/tower.stl
+++ b/resources/calib/PresureAdvnace/tower.stl
--- a/resources/calib/PresureAdvnace/tower_with_seam.stl
+++ b/resources/calib/PresureAdvnace/tower_with_seam.stl
--- a/resources/calib/filament_flow/flowrate-test-pass1.3mf
+++ b/resources/calib/filament_flow/flowrate-test-pass1.3mf
--- a/resources/calib/filament_flow/flowrate-test-pass2.3mf
+++ b/resources/calib/filament_flow/flowrate-test-pass2.3mf
--- a/resources/calib/flowrate_0.stl
+++ b/resources/calib/flowrate_0.stl
--- a/resources/calib/flowrate_10.stl
+++ b/resources/calib/flowrate_10.stl
--- a/resources/calib/flowrate_15.stl
+++ b/resources/calib/flowrate_15.stl
--- a/resources/calib/flowrate_20.stl
+++ b/resources/calib/flowrate_20.stl
--- a/resources/calib/flowrate_5.stl
+++ b/resources/calib/flowrate_5.stl
--- a/resources/calib/flowrate_m10.stl
+++ b/resources/calib/flowrate_m10.stl
--- a/resources/calib/flowrate_m15.stl
+++ b/resources/calib/flowrate_m15.stl
--- a/resources/calib/flowrate_m2.stl
+++ b/resources/calib/flowrate_m2.stl
--- a/resources/calib/flowrate_m20.stl
+++ b/resources/calib/flowrate_m20.stl
--- a/resources/calib/flowrate_m4.stl
+++ b/resources/calib/flowrate_m4.stl
--- a/resources/calib/flowrate_m5.stl
+++ b/resources/calib/flowrate_m5.stl
--- a/resources/calib/flowrate_m6.stl
+++ b/resources/calib/flowrate_m6.stl
--- a/resources/calib/flowrate_m8.stl
+++ b/resources/calib/flowrate_m8.stl
--- a/resources/config.json
+++ b/resources/config.json
@@ -21,7 +21,7 @@
                "FUNC_SEND_TO_SDCARD": false
            },
            "camera_resolution":["720p"],
-            "bed_temperature_limit": 100,
+            "bed_temperature_limit": 120,
            "model_id": "C11",
            "printer_type": "C11",
            "printer_thumbnail_image": "printer_thumbnail_p1p"
@@ -32,6 +32,7 @@
                "FUNC_LOCAL_TUNNEL": false
            },
            "camera_resolution":["720p","1080p"],
+            "bed_temperature_limit": 120,
            "model_id": "BL-P002",
            "printer_type": "3DPrinter-X1",
            "printer_thumbnail_image": "printer_thumbnail"
@@ -43,6 +44,7 @@
            },
            "model_id": "BL-P001",
            "camera_resolution":["720p","1080p"],
+            "bed_temperature_limit": 120,
            "printer_type": "3DPrinter-X1-Carbon",
            "printer_thumbnail_image": "printer_thumbnail"
        }
--- a/resources/i18n/de/BambuStudio.mo
+++ b/resources/i18n/de/BambuStudio.mo
--- a/resources/i18n/en/BambuStudio.mo
+++ b/resources/i18n/en/BambuStudio.mo
--- a/resources/i18n/es/BambuStudio.mo
+++ b/resources/i18n/es/BambuStudio.mo
--- a/resources/i18n/fr/BambuStudio.mo
+++ b/resources/i18n/fr/BambuStudio.mo
--- a/resources/i18n/hu/BambuStudio.mo
+++ b/resources/i18n/hu/BambuStudio.mo
--- a/resources/i18n/it/BambuStudio.mo
+++ b/resources/i18n/it/BambuStudio.mo
--- a/resources/i18n/nl/BambuStudio.mo
+++ b/resources/i18n/nl/BambuStudio.mo
--- a/resources/i18n/sv/BambuStudio.mo
+++ b/resources/i18n/sv/BambuStudio.mo
--- a/resources/i18n/zh_cn/BambuStudio.mo
+++ b/resources/i18n/zh_cn/BambuStudio.mo
--- a/resources/images/BambuStudio-mac_128px.png
+++ b/resources/images/BambuStudio-mac_128px.png
--- a/resources/images/BambuStudio.icns
+++ b/resources/images/BambuStudio.icns
--- a/resources/images/BambuStudio.ico
+++ b/resources/images/BambuStudio.ico
--- a/resources/images/BambuStudio.png
+++ b/resources/images/BambuStudio.png
--- a/resources/images/BambuStudio.svg
+++ b/resources/images/BambuStudio.svg
@@ -1,5 +1,5 @@
 <svg width="128" height="128" viewBox="0 0 128 128" fill="none" xmlns="http://www.w3.org/2000/svg">
-<path d="M99.7586 128H28.2414C12.6464 128 0 115.354 0 99.7586V28.2414C0 12.6464 12.6464 0 28.2414 0H99.7586C115.354 0 128 12.6464 128 28.2414V99.7586C128 115.354 115.354 128 99.7586 128Z" fill="#00AE42"/>
+<path d="M99.7586 128H28.2414C12.6464 128 0 115.354 0 99.7586V28.2414C0 12.6464 12.6464 0 28.2414 0H99.7586C115.354 0 128 12.6464 128 28.2414V99.7586C128 115.354 115.354 128 99.7586 128Z" fill="#009688"/>
 <path d="M65.7826 54.5925V101.264H92.3441V65.0528L65.7826 54.5925Z" fill="white"/>
 <path d="M65.7826 26.7924V50.1337L92.3441 60.5939V26.7924H65.7826Z" fill="white"/>
 <path d="M35.0999 73.4637V26.7924H61.6615V63.0147L35.0999 73.4637Z" fill="white"/>
--- a/resources/images/BambuStudioTitle.ico
+++ b/resources/images/BambuStudioTitle.ico
--- a/resources/images/BambuStudioTitle.png
+++ b/resources/images/BambuStudioTitle.png
--- a/resources/images/BambuStudio_128px.png
+++ b/resources/images/BambuStudio_128px.png
--- a/resources/images/BambuStudio_154.png
+++ b/resources/images/BambuStudio_154.png
--- a/resources/images/BambuStudio_154_title.png
+++ b/resources/images/BambuStudio_154_title.png
--- a/resources/images/BambuStudio_192px.png
+++ b/resources/images/BambuStudio_192px.png
--- a/resources/images/BambuStudio_192px_transparent.png
+++ b/resources/images/BambuStudio_192px_transparent.png
--- a/resources/images/BambuStudio_32px.png
+++ b/resources/images/BambuStudio_32px.png
--- a/resources/images/BambuStudio_64.png
+++ b/resources/images/BambuStudio_64.png
--- a/resources/images/BambuStudio_about.png
+++ b/resources/images/BambuStudio_about.png
--- a/resources/images/BambuStudio_about.svg
+++ b/resources/images/BambuStudio_about.svg
@@ -0,0 +1,87 @@
+<svg width="562" height="238" viewBox="0 0 562 238" fill="none" xmlns="http://www.w3.org/2000/svg">
+<rect x="1" y="1" width="560" height="237" fill="#009688"/>
+<g opacity="0.2">
+<path d="M19.234 8.7434V25.4149L37.159 18.6717V2.00019L19.234 8.7434Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M19.2341 8.7434V25.4149L1 18.6717V2.00019L19.2341 8.7434Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M90.9363 8.7434V25.4149L73.0113 18.6717V2.00019L90.9363 8.7434Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M127.404 8.7434V25.4149L145.329 18.6717V2.00019L127.404 8.7434Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M19.2341 25.538V42.2238L1 35.4806V18.8091L19.2341 25.538Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M19.234 58.7326V75.8463L37.159 68.9302V51.8313L19.234 58.7326Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M55.3944 25.538V42.2238L73.0104 35.4806V18.8091L55.3944 25.538Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M90.9363 42.2787V58.7364L73.0113 52.0939V35.6219L90.9363 42.2787Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M90.9363 96.0424V112.5L73.0113 105.858V89.3856L90.9363 96.0424Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M55.3945 25.6388V42.524L37.1604 35.7089V18.8091L55.3945 25.6388Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M55.3945 42.3652V59.0366L37.1604 52.3078V35.6219L55.3945 42.3652Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M127.404 42.2787V58.7364L145.329 52.0939V35.6219L127.404 42.2787Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M163.251 25.538V42.2238L145.326 35.4806V18.8091L163.251 25.538Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M127.404 75.4718V92.357L145.329 85.5419V68.6422L127.404 75.4718Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M163.251 42.2233V59.337L145.326 52.4209V35.472L163.251 42.2233Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M90.9338 58.7326V75.8463L108.859 68.9302V51.8313L90.9338 58.7326Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M199.413 25.538V42.2238L181.179 35.4806V18.8091L199.413 25.538Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M127.401 25.538V42.2238L108.858 35.4806V18.8091L127.401 25.538Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M199.413 58.7326V75.8463L181.179 68.9302V51.8313L199.413 58.7326Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M163.253 8.65694V25.1147L181.178 18.4721V2.00019L163.253 8.65694Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+</g>
+<g opacity="0.2">
+<path d="M235.752 8.74321V25.4147L253.677 18.6715V2L235.752 8.74321Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M235.75 8.74321V25.4147L217.516 18.6715V2L235.75 8.74321Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M307.45 8.74321V25.4147L289.525 18.6715V2L307.45 8.74321Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M343.92 8.74321V25.4147L361.845 18.6715V2L343.92 8.74321Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M199.591 42.2785V58.7363L217.516 52.0937V35.6218L199.591 42.2785Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M235.75 25.5378V42.2236L217.516 35.4804V18.8089L235.75 25.5378Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M235.752 58.7325V75.8461L253.677 68.93V51.8311L235.752 58.7325Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M271.91 25.5378V42.2236L289.526 35.4804V18.8089L271.91 25.5378Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M307.45 42.2785V58.7363L289.525 52.0937V35.6218L307.45 42.2785Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M307.45 76.8426V93.3003L289.525 86.6577V70.1858L307.45 76.8426Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M271.908 25.6386V42.5238L253.674 35.7087V18.8089L271.908 25.6386Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M271.908 42.365V59.0365L253.674 52.3076V35.6218L271.908 42.365Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M343.92 42.2785V58.7363L361.845 52.0937V35.6218L343.92 42.2785Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M379.769 25.5378V42.2236L361.844 35.4804V18.8089L379.769 25.5378Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M343.92 75.4716V92.3568L361.845 85.5417V68.642L343.92 75.4716Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M379.769 42.2231V59.3368L361.844 52.4207V35.4719L379.769 42.2231Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M307.452 58.7325V75.8461L325.377 68.93V51.8311L307.452 58.7325Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M415.925 25.5378V42.2236L397.691 35.4804V18.8089L415.925 25.5378Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M379.771 58.7472V75.8461L397.696 68.9447V51.8311L379.771 58.7472Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M379.769 98.3847V115.484L397.694 108.582V91.4686L379.769 98.3847Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M343.917 25.5378V42.2236L325.374 35.4804V18.8089L343.917 25.5378Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M415.925 58.7325V75.8461L397.691 68.93V51.8311L415.925 58.7325Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M455.53 113.522V130.636L437.296 123.72V106.621L455.53 113.522Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M379.771 8.65675V25.1145L397.696 18.4719V2L379.771 8.65675Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+</g>
+<g opacity="0.5">
+<g opacity="0.2">
+<path d="M452.919 8.74321V25.4147L434.685 18.6715V2L452.919 8.74321Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M416.76 42.2785V58.7363L434.685 52.0937V35.6218L416.76 42.2785Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M416.76 75.2345V91.6922L434.685 85.0496V68.5777L416.76 75.2345Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M452.919 25.5378V42.2236L434.685 35.4804V18.8089L452.919 25.5378Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+</g>
+</g>
+<g opacity="0.2">
+<path d="M452.832 8.74321V25.4147L470.757 18.6715V2L452.832 8.74321Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M452.832 8.74321V25.4147L434.598 18.6715V2L452.832 8.74321Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M524.534 8.74321V25.4147L506.609 18.6715V2L524.534 8.74321Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M452.832 25.5378V42.2236L434.598 35.4804V18.8089L452.832 25.5378Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M452.832 58.7325V75.8461L470.757 68.93V51.8311L452.832 58.7325Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M488.992 25.5378V42.2236L506.608 35.4804V18.8089L488.992 25.5378Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M524.534 42.2785V58.7363L506.609 52.0937V35.6218L524.534 42.2785Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M524.534 96.0422V112.5L506.609 105.857V89.3854L524.534 96.0422Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M488.992 25.6386V42.5238L470.758 35.7087V18.8089L488.992 25.6386Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M488.992 42.365V59.0365L470.758 52.3076V35.6218L488.992 42.365Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M524.531 58.7325V75.8461L542.457 68.93V51.8311L524.531 58.7325Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M560.999 25.5378V42.2236L542.456 35.4804V18.8089L560.999 25.5378Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+<path d="M560.999 77.5065V94.1923L542.456 87.4491V70.7776L560.999 77.5065Z" stroke="white" stroke-width="1.5" stroke-miterlimit="10"/>
+</g>
+<path d="M248.355 127.203V110.613H243.689V131.077H260.806L259.335 127.203H248.355Z" fill="white"/>
+<path d="M280.597 114.678H264.164L265.501 118.212H280.434C280.687 118.212 280.895 118.419 280.895 118.67V120.755H267.566C265.055 120.755 263.02 122.781 263.02 125.279V126.551C263.02 129.05 265.055 131.076 267.566 131.076H285.159V119.188C285.159 116.704 283.123 114.678 280.597 114.678ZM280.88 127.512H267.73C267.477 127.512 267.269 127.305 267.269 127.054V124.732C267.269 124.481 267.477 124.274 267.73 124.274H280.88V127.512Z" fill="white"/>
+<path d="M304.669 114.678H293.941V110.583H293.852H289.261V131.076H293.941H304.669C307.18 131.076 309.216 129.05 309.216 126.551V119.218C309.231 116.719 307.195 114.678 304.669 114.678ZM304.64 127.069C304.64 127.32 304.432 127.527 304.179 127.527H293.941V118.286H304.179C304.432 118.286 304.64 118.493 304.64 118.744V127.069Z" fill="white"/>
+<path d="M319.319 88.403H296.169V104.801H300.716V92.4543C300.716 92.203 300.924 91.996 301.177 91.996H307.328C307.581 91.996 307.789 92.203 307.789 92.4543V104.801H312.351V92.4543C312.351 92.203 312.559 91.996 312.811 91.996H318.874C319.126 91.996 319.334 92.203 319.334 92.4543V104.801H323.911V92.9275C323.866 90.4287 321.83 88.403 319.319 88.403Z" fill="white"/>
+<path d="M367.491 100.779C367.491 101.03 367.283 101.237 367.031 101.237H356.095C355.842 101.237 355.634 101.03 355.634 100.779V88.403H351.34V100.276C351.34 102.775 353.375 104.801 355.887 104.801H367.194C369.705 104.801 371.741 102.775 371.741 100.276V88.403H367.476V100.779H367.491Z" fill="white"/>
+<path d="M287.492 88.403H271.058L272.395 91.9368H287.328C287.581 91.9368 287.789 92.1438 287.789 92.3952V94.48H274.461C271.95 94.48 269.914 96.5057 269.914 99.0045V100.276C269.914 102.775 271.95 104.801 274.461 104.801H292.039V92.9127C292.053 90.4139 290.003 88.403 287.492 88.403ZM287.774 101.237H274.624C274.372 101.237 274.164 101.03 274.164 100.779V98.4574C274.164 98.2061 274.372 97.9991 274.624 97.9991H287.774V101.237Z" fill="white"/>
+<path d="M342.976 88.4034H332.248V84.3077H332.158H327.567V104.801H332.248H342.976C345.487 104.801 347.522 102.775 347.522 100.276V92.9279C347.537 90.429 345.502 88.4034 342.976 88.4034ZM342.946 100.779C342.946 101.031 342.738 101.238 342.485 101.238H332.248V91.9963H342.485C342.738 91.9963 342.946 92.2033 342.946 92.4547V100.779Z" fill="white"/>
+<path d="M266.452 98.0871C266.319 96.5198 265.516 95.1151 264.268 94.0801C264.922 93.1782 265.353 92.084 265.427 90.9012C265.427 90.7829 265.457 89.6887 265.442 89.5409C265.175 86.1401 261.802 83.4639 257.701 83.4639C257.641 83.4639 252.426 83.4639 248.369 83.4639V87.116L243.689 88.9051V104.815H260.539C260.539 104.815 260.821 104.8 260.94 104.8C263.897 104.608 266.259 102.212 266.452 99.2108C266.467 99.063 266.452 98.235 266.452 98.0871ZM248.354 87.1012H258.28C258.577 87.1012 258.86 87.1603 259.112 87.2786C260.048 87.6483 260.717 88.565 260.717 89.6296C260.717 89.6296 260.702 89.9844 260.657 90.1619C260.524 90.9751 259.974 91.6257 259.246 91.9214C258.919 92.0693 258.562 92.158 258.176 92.158H248.354V87.1012ZM258.934 101.237H248.354V95.7805H258.934C260.449 95.7805 261.668 96.993 261.668 98.5011C261.668 100.024 260.449 101.237 258.934 101.237Z" fill="white"/>
+<path d="M248.354 83.4486V79.0276L243.689 80.8167V85.2377L248.354 83.4486Z" fill="white"/>
+<path d="M212.56 98.4442V131.077H231.222V105.748L212.56 98.4442Z" fill="white"/>
+<path d="M212.56 79V95.3236L231.222 102.643V79H212.56Z" fill="white"/>
+<path d="M191 111.647V79H209.663V104.328L191 111.647Z" fill="white"/>
+<path d="M191 131.076V114.767L209.663 107.448V131.076H191Z" fill="white"/>
+</svg>
--- a/resources/images/ams_arrow.svg
+++ b/resources/images/ams_arrow.svg
@@ -1,3 +1,3 @@
 <svg width="26" height="11" viewBox="0 0 26 11" fill="none" xmlns="http://www.w3.org/2000/svg">
-<path d="M25.0877 5.97153C25.3595 5.69978 25.3595 5.2592 25.0877 4.98746L20.6594 0.55913C20.3877 0.287386 19.9471 0.287386 19.6753 0.55913C19.4036 0.830875 19.4036 1.27146 19.6753 1.5432L23.6116 5.47949L19.6753 9.41578C19.4036 9.68753 19.4036 10.1281 19.6753 10.3999C19.9471 10.6716 20.3877 10.6716 20.6594 10.3999L25.0877 5.97153ZM0.90332 6.17534H24.5957V4.78365H0.90332V6.17534Z" fill="#00AE42"/>
+<path d="M25.0877 5.97153C25.3595 5.69978 25.3595 5.2592 25.0877 4.98746L20.6594 0.55913C20.3877 0.287386 19.9471 0.287386 19.6753 0.55913C19.4036 0.830875 19.4036 1.27146 19.6753 1.5432L23.6116 5.47949L19.6753 9.41578C19.4036 9.68753 19.4036 10.1281 19.6753 10.3999C19.9471 10.6716 20.3877 10.6716 20.6594 10.3999L25.0877 5.97153ZM0.90332 6.17534H24.5957V4.78365H0.90332V6.17534Z" fill="#009688"/>
 </svg>
--- a/resources/images/ams_humidity_2.svg
+++ b/resources/images/ams_humidity_2.svg
@@ -3,7 +3,7 @@
 <path d="M1.33594 9.03081C1.33594 7.79861 3.10361 3.86325 3.616 3.86328C4.1284 3.86331 5.81925 7.97448 5.81925 9.03081C5.81925 10.0871 5.14708 11.549 3.616 11.549C2.08493 11.549 1.33594 10.263 1.33594 9.03081Z" stroke="#898989"/>
 <path d="M2.79824 8.40322C2.72754 8.79592 2.77015 9.68104 3.50627 10.0798" stroke="#898989" stroke-linecap="round"/>
 <path fill-rule="evenodd" clip-rule="evenodd" d="M11.6171 11.4737C12.5619 11.7169 13.26 12.5746 13.26 13.5953C13.26 14.8051 12.2792 15.7858 11.0694 15.7858C9.85964 15.7858 8.87891 14.8051 8.87891 13.5953C8.87891 12.5746 9.57702 11.7169 10.5218 11.4737L10.5218 3.19021C10.5218 2.88776 10.767 2.64258 11.0694 2.64258C11.3719 2.64258 11.6171 2.88776 11.6171 3.19021L11.6171 11.4737Z" fill="#C2C2C2"/>
-<path fill-rule="evenodd" clip-rule="evenodd" d="M10.5218 11.4743L10.5218 9.31717C10.5218 9.01472 10.767 8.76953 11.0694 8.76953C11.3719 8.76953 11.6171 9.01472 11.6171 9.31717L11.6171 11.4743C12.5619 11.7175 13.26 12.5752 13.26 13.5959C13.26 14.8057 12.2792 15.7864 11.0694 15.7864C9.85964 15.7864 8.87891 14.8057 8.87891 13.5959C8.87891 12.5751 9.57702 11.7175 10.5218 11.4743Z" fill="#00AE42"/>
+<path fill-rule="evenodd" clip-rule="evenodd" d="M10.5218 11.4743L10.5218 9.31717C10.5218 9.01472 10.767 8.76953 11.0694 8.76953C11.3719 8.76953 11.6171 9.01472 11.6171 9.31717L11.6171 11.4743C12.5619 11.7175 13.26 12.5752 13.26 13.5959C13.26 14.8057 12.2792 15.7864 11.0694 15.7864C9.85964 15.7864 8.87891 14.8057 8.87891 13.5959C8.87891 12.5751 9.57702 11.7175 10.5218 11.4743Z" fill="#009688"/>
 <path d="M19.4609 15.7852H16.7756" stroke="#898989" stroke-linecap="round"/>
 <path d="M19.4609 12.5H17.2232" stroke="#898989" stroke-linecap="round"/>
 <path d="M19.4609 9.21484L16.3281 9.21484" stroke="#898989" stroke-linecap="round"/>
--- a/resources/images/ams_humidity_3.svg
+++ b/resources/images/ams_humidity_3.svg
@@ -3,7 +3,7 @@
 <path d="M0.976562 9.03081C0.976562 7.79861 2.74423 3.86325 3.25663 3.86328C3.76903 3.86331 5.45988 7.97448 5.45988 9.03081C5.45988 10.0871 4.78771 11.549 3.25663 11.549C1.72555 11.549 0.976562 10.263 0.976562 9.03081Z" stroke="#898989"/>
 <path d="M2.43887 8.40322C2.36816 8.79592 2.41078 9.68104 3.14689 10.0798" stroke="#898989" stroke-linecap="round"/>
 <path fill-rule="evenodd" clip-rule="evenodd" d="M11.2538 11.4737C12.1986 11.7169 12.8967 12.5746 12.8967 13.5953C12.8967 14.8051 11.916 15.7858 10.7062 15.7858C9.49636 15.7858 8.51562 14.8051 8.51562 13.5953C8.51562 12.5746 9.21373 11.7169 10.1585 11.4737L10.1585 3.19021C10.1585 2.88776 10.4037 2.64258 10.7062 2.64258C11.0086 2.64258 11.2538 2.88776 11.2538 3.19021L11.2538 11.4737Z" fill="#C2C2C2"/>
-<path d="M12.8967 13.5948C12.8967 14.8046 11.916 15.7854 10.7062 15.7854C9.49636 15.7854 8.51562 14.8046 8.51562 13.5948C8.51562 12.385 9.49636 11.4043 10.7062 11.4043C11.916 11.4043 12.8967 12.385 12.8967 13.5948Z" fill="#00AE42"/>
+<path d="M12.8967 13.5948C12.8967 14.8046 11.916 15.7854 10.7062 15.7854C9.49636 15.7854 8.51562 14.8046 8.51562 13.5948C8.51562 12.385 9.49636 11.4043 10.7062 11.4043C11.916 11.4043 12.8967 12.385 12.8967 13.5948Z" fill="#009688"/>
 <path d="M19.1016 15.7852H16.4163" stroke="#898989" stroke-linecap="round"/>
 <path d="M19.1016 12.5H16.8638" stroke="#898989" stroke-linecap="round"/>
 <path d="M19.1016 9.21484L15.9687 9.21484" stroke="#898989" stroke-linecap="round"/>
--- a/resources/images/ams_humidity_4.svg
+++ b/resources/images/ams_humidity_4.svg
@@ -3,7 +3,7 @@
 <path d="M1.39453 9.03081C1.39453 7.79861 3.1622 3.86325 3.6746 3.86328C4.18699 3.86331 5.87785 7.97448 5.87785 9.03081C5.87785 10.0871 5.20568 11.549 3.6746 11.549C2.14352 11.549 1.39453 10.263 1.39453 9.03081Z" stroke="#898989"/>
 <path d="M2.85684 8.40322C2.78613 8.79592 2.82875 9.68104 3.56486 10.0798" stroke="#898989" stroke-linecap="round"/>
 <path fill-rule="evenodd" clip-rule="evenodd" d="M11.6718 11.4737C12.6166 11.7169 13.3147 12.5746 13.3147 13.5953C13.3147 14.8051 12.3339 15.7858 11.1241 15.7858C9.91433 15.7858 8.93359 14.8051 8.93359 13.5953C8.93359 12.5746 9.6317 11.7169 10.5765 11.4737L10.5765 3.19021C10.5765 2.88776 10.8217 2.64258 11.1241 2.64258C11.4266 2.64258 11.6718 2.88776 11.6718 3.19021L11.6718 11.4737Z" fill="#C2C2C2"/>
-<path d="M13.3147 13.596C13.3147 14.8058 12.3339 15.7866 11.1241 15.7866C9.91433 15.7866 8.93359 14.8058 8.93359 13.596C8.93359 13.1677 9.58237 13.8695 10.7922 13.8695C12.002 13.8695 13.3147 12.3862 13.3147 13.596Z" fill="#00AE42"/>
+<path d="M13.3147 13.596C13.3147 14.8058 12.3339 15.7866 11.1241 15.7866C9.91433 15.7866 8.93359 14.8058 8.93359 13.596C8.93359 13.1677 9.58237 13.8695 10.7922 13.8695C12.002 13.8695 13.3147 12.3862 13.3147 13.596Z" fill="#009688"/>
 <path d="M19.5156 15.7871H16.8303" stroke="#898989" stroke-linecap="round"/>
 <path d="M19.5156 12.5H17.2779" stroke="#898989" stroke-linecap="round"/>
 <path d="M19.5156 9.21484L16.3828 9.21484" stroke="#898989" stroke-linecap="round"/>
--- a/resources/images/auxiliary_cover.svg
+++ b/resources/images/auxiliary_cover.svg
@@ -2,6 +2,6 @@

 <g>
  <title>Layer 1</title>
-  <path id="svg_1" fill="#00AE42" d="m0.6875,0.18359l49.3126,0c2.7615,0 5,2.23858 5,5l0,42.71011l-54.3126,-47.71011z"/>
+  <path id="svg_1" fill="#009688" d="m0.6875,0.18359l49.3126,0c2.7615,0 5,2.23858 5,5l0,42.71011l-54.3126,-47.71011z"/>
 </g>
 </svg>
--- a/resources/images/bind_machine.svg
+++ b/resources/images/bind_machine.svg
@@ -2,7 +2,7 @@

 <g>
  <title>Layer 1</title>
-  <path id="svg_1" fill="#00AE42" d="m14.4493,12l-7.44846,0c-2.76142,0 -5,-2.23858 -5,-5c0,-2.76142 2.23858,-5 5,-5l7.44846,0l0,-2l-7.44846,0c-3.86599,0 -7,3.13401 -7,7c0,3.866 3.13401,7 7,7l7.44846,0l0,-2zm5.0253,0l0,2l7.4473,0c3.866,0 7,-3.134 7,-7c0,-3.86599 -3.134,-7 -7,-7l-7.4473,0l0,2l7.4473,0c2.7614,0 5,2.23858 5,5c0,2.76142 -2.2386,5 -5,5l-7.4473,0z" clip-rule="evenodd" fill-rule="evenodd"/>
-  <line id="svg_2" stroke-linecap="round" stroke-width="2" stroke="#00AE42" y2="7.125" x2="7.2832" y1="7.125" x1="28.5254"/>
+  <path id="svg_1" fill="#009688" d="m14.4493,12l-7.44846,0c-2.76142,0 -5,-2.23858 -5,-5c0,-2.76142 2.23858,-5 5,-5l7.44846,0l0,-2l-7.44846,0c-3.86599,0 -7,3.13401 -7,7c0,3.866 3.13401,7 7,7l7.44846,0l0,-2zm5.0253,0l0,2l7.4473,0c3.866,0 7,-3.134 7,-7c0,-3.86599 -3.134,-7 -7,-7l-7.4473,0l0,2l7.4473,0c2.7614,0 5,2.23858 5,5c0,2.76142 -2.2386,5 -5,5l-7.4473,0z" clip-rule="evenodd" fill-rule="evenodd"/>
+  <line id="svg_2" stroke-linecap="round" stroke-width="2" stroke="#009688" y2="7.125" x2="7.2832" y1="7.125" x1="28.5254"/>
 </g>
 </svg>
--- a/resources/images/calib_sf.svg
+++ b/resources/images/calib_sf.svg
@@ -0,0 +1,15 @@
+<svg width="14" height="15" viewBox="0 0 14 15" fill="none" xmlns="http://www.w3.org/2000/svg">
+<g clip-path="url(#clip0_8074_35820)">
+<path d="M2.1084 3.09195C2.1084 2.81581 2.33226 2.59195 2.6084 2.59195H11.3915C11.6677 2.59195 11.8915 2.81581 11.8915 3.09195V11.8751C11.8915 12.1512 11.6677 12.3751 11.3915 12.3751H2.6084C2.33226 12.3751 2.1084 12.1512 2.1084 11.8751V3.09195Z" fill="#505050"/>
+<path fill-rule="evenodd" clip-rule="evenodd" d="M3.1084 3.59195V11.3751H10.8915V3.59195H3.1084ZM2.6084 2.59195C2.33226 2.59195 2.1084 2.81581 2.1084 3.09195V11.8751C2.1084 12.1512 2.33226 12.3751 2.6084 12.3751H11.3915C11.6677 12.3751 11.8915 12.1512 11.8915 11.8751V3.09195C11.8915 2.81581 11.6677 2.59195 11.3915 2.59195H2.6084Z" fill="#F7F7F7"/>
+<path fill-rule="evenodd" clip-rule="evenodd" d="M6.6709 5.48537L6.6709 0.48352L7.6709 0.483521L7.6709 5.48537L6.6709 5.48537Z" fill="#F7F7F7"/>
+<path fill-rule="evenodd" clip-rule="evenodd" d="M6.6709 14.4835L6.6709 9.48166L7.6709 9.48166L7.6709 14.4835L6.6709 14.4835Z" fill="#F7F7F7"/>
+<path fill-rule="evenodd" clip-rule="evenodd" d="M8.99815 6.93469L14 6.93469L14 7.93469L8.99815 7.93469L8.99815 6.93469Z" fill="#F7F7F7"/>
+<path fill-rule="evenodd" clip-rule="evenodd" d="M0.000104992 6.93469L5.00195 6.93469L5.00195 7.93469L0.000104904 7.93469L0.000104992 6.93469Z" fill="#F7F7F7"/>
+</g>
+<defs>
+<clipPath id="clip0_8074_35820">
+<rect width="14" height="14" fill="white" transform="translate(0 14.4835) rotate(-90)"/>
+</clipPath>
+</defs>
+</svg>
--- a/resources/images/calib_sf_inactive.svg
+++ b/resources/images/calib_sf_inactive.svg
@@ -0,0 +1,17 @@
+<svg width="14" height="15" viewBox="0 0 14 15" fill="none" xmlns="http://www.w3.org/2000/svg">
+<g opacity="0.5">
+<g clip-path="url(#clip0_8074_35820)">
+<path d="M2.1084 3.09195C2.1084 2.81581 2.33226 2.59195 2.6084 2.59195H11.3915C11.6677 2.59195 11.8915 2.81581 11.8915 3.09195V11.8751C11.8915 12.1512 11.6677 12.3751 11.3915 12.3751H2.6084C2.33226 12.3751 2.1084 12.1512 2.1084 11.8751V3.09195Z" fill="#505050"/>
+<path fill-rule="evenodd" clip-rule="evenodd" d="M3.1084 3.59195V11.3751H10.8915V3.59195H3.1084ZM2.6084 2.59195C2.33226 2.59195 2.1084 2.81581 2.1084 3.09195V11.8751C2.1084 12.1512 2.33226 12.3751 2.6084 12.3751H11.3915C11.6677 12.3751 11.8915 12.1512 11.8915 11.8751V3.09195C11.8915 2.81581 11.6677 2.59195 11.3915 2.59195H2.6084Z" fill="#F7F7F7"/>
+<path fill-rule="evenodd" clip-rule="evenodd" d="M6.6709 5.48537L6.6709 0.48352L7.6709 0.483521L7.6709 5.48537L6.6709 5.48537Z" fill="#F7F7F7"/>
+<path fill-rule="evenodd" clip-rule="evenodd" d="M6.6709 14.4835L6.6709 9.48166L7.6709 9.48166L7.6709 14.4835L6.6709 14.4835Z" fill="#F7F7F7"/>
+<path fill-rule="evenodd" clip-rule="evenodd" d="M8.99815 6.93469L14 6.93469L14 7.93469L8.99815 7.93469L8.99815 6.93469Z" fill="#F7F7F7"/>
+<path fill-rule="evenodd" clip-rule="evenodd" d="M0.000104992 6.93469L5.00195 6.93469L5.00195 7.93469L0.000104904 7.93469L0.000104992 6.93469Z" fill="#F7F7F7"/>
+</g>
+<defs>
+<clipPath id="clip0_8074_35820">
+<rect width="14" height="14" fill="white" transform="translate(0 14.4835) rotate(-90)"/>
+</clipPath>
+</defs>
+</g>
+</svg>
--- a/resources/images/camera_setting.svg
+++ b/resources/images/camera_setting.svg
@@ -1,4 +1,4 @@
 <svg width="20" height="20" viewBox="0 0 20 20" fill="none" xmlns="http://www.w3.org/2000/svg">
-<path d="M14.3694 1.92413L18.9283 9.82031L14.3694 17.7165L5.25168 17.7165L0.692819 9.82031L5.25168 1.92413L14.3694 1.92413Z" fill="#00AE42" fill-opacity="0.15" stroke="#00AE42" stroke-width="1.2"/>
-<circle cx="9.80791" cy="9.82119" r="2.92782" stroke="#00AE42" stroke-width="1.2"/>
+<path d="M14.3694 1.92413L18.9283 9.82031L14.3694 17.7165L5.25168 17.7165L0.692819 9.82031L5.25168 1.92413L14.3694 1.92413Z" fill="#009688" fill-opacity="0.15" stroke="#009688" stroke-width="1.2"/>
+<circle cx="9.80791" cy="9.82119" r="2.92782" stroke="#009688" stroke-width="1.2"/>
 </svg>
--- a/resources/images/camera_setting_hover.svg
+++ b/resources/images/camera_setting_hover.svg
@@ -1,4 +1,4 @@
 <svg width="20" height="20" viewBox="0 0 20 20" fill="none" xmlns="http://www.w3.org/2000/svg">
-<path d="M14.2828 2.06436L18.7551 9.81055L14.2828 17.5567L5.33829 17.5567L0.866025 9.81055L5.33829 2.06436L14.2828 2.06436Z" fill="#00AE42" fill-opacity="0.15" stroke="#00AE42" stroke-width="1.5"/>
-<circle cx="9.80791" cy="9.81143" r="2.77782" stroke="#00AE42" stroke-width="1.5"/>
+<path d="M14.2828 2.06436L18.7551 9.81055L14.2828 17.5567L5.33829 17.5567L0.866025 9.81055L5.33829 2.06436L14.2828 2.06436Z" fill="#009688" fill-opacity="0.15" stroke="#009688" stroke-width="1.5"/>
+<circle cx="9.80791" cy="9.81143" r="2.77782" stroke="#009688" stroke-width="1.5"/>
 </svg>
--- a/resources/images/check_half.svg
+++ b/resources/images/check_half.svg
@@ -1,4 +1,4 @@
 <svg width="18" height="18" viewBox="0 0 18 18" fill="none" xmlns="http://www.w3.org/2000/svg">
-<rect x="1" y="1" width="16" height="16" rx="1" fill="#00AE42"/>
+<rect x="1" y="1" width="16" height="16" rx="1" fill="#009688"/>
 <path d="M4 9L14 9" stroke="white" stroke-linecap="round"/>
 </svg>
--- a/resources/images/check_off_focused.svg
+++ b/resources/images/check_off_focused.svg
@@ -1,3 +1,3 @@
 <svg width="18" height="18" viewBox="0 0 18 18" fill="none" xmlns="http://www.w3.org/2000/svg">
-<rect x="1.5" y="1.5" width="15" height="15" rx="0.5" stroke="#00AE42"/>
+<rect x="1.5" y="1.5" width="15" height="15" rx="0.5" stroke="#009688"/>
 </svg>
--- a/resources/images/check_on.svg
+++ b/resources/images/check_on.svg
@@ -1,4 +1,4 @@
 <svg width="18" height="18" viewBox="0 0 18 18" fill="none" xmlns="http://www.w3.org/2000/svg">
-<rect x="1" y="1" width="16" height="16" rx="1" fill="#00AE42"/>
+<rect x="1" y="1" width="16" height="16" rx="1" fill="#009688"/>
 <path d="M4.35537 8.5374L8.30284 11.9361C8.71855 12.294 9.34501 12.2502 9.70687 11.838L14.8175 6.01521" stroke="white" stroke-width="1.2" stroke-linecap="round"/>
 </svg>
--- a/resources/images/completed.svg
+++ b/resources/images/completed.svg
@@ -2,7 +2,7 @@

 <g>
  <title>Layer 1</title>
-  <circle id="svg_1" fill="#00AE42" r="12.5" cy="12.5" cx="12.5"/>
+  <circle id="svg_1" fill="#009688" r="12.5" cy="12.5" cx="12.5"/>
  <path id="svg_2" stroke-linecap="round" stroke-width="2" stroke="white" d="m6,12.0189l3.57518,3.57c0.78082,0.7796 2.04552,0.7796 2.82642,0l6.5984,-6.5889"/>
 </g>
 </svg>
--- a/resources/images/cross_focus.svg
+++ b/resources/images/cross_focus.svg
@@ -1,4 +1,4 @@
 <svg width="16" height="16" viewBox="0 0 16 16" fill="none" xmlns="http://www.w3.org/2000/svg">
-<path d="M14 2L2 14" stroke="#00AE42" stroke-width="3" stroke-miterlimit="10" stroke-linecap="round"/>
-<path d="M2 2L14 14" stroke="#00AE42" stroke-width="3" stroke-miterlimit="10" stroke-linecap="round"/>
+<path d="M14 2L2 14" stroke="#009688" stroke-width="3" stroke-miterlimit="10" stroke-linecap="round"/>
+<path d="M2 2L14 14" stroke="#009688" stroke-width="3" stroke-miterlimit="10" stroke-linecap="round"/>
 </svg>
--- a/resources/images/cross_focus_large.svg
+++ b/resources/images/cross_focus_large.svg
@@ -1,7 +1,7 @@
 <svg width="16" height="16" viewBox="0 0 16 16" fill="none" xmlns="http://www.w3.org/2000/svg">
 <g clip-path="url(#clip0_23_257)">
-<path d="M14.5999 1.40002L1.3999 14.6" stroke="#00AE42" stroke-width="3.3" stroke-miterlimit="10" stroke-linecap="round"/>
-<path d="M1.3999 1.40002L14.5999 14.6" stroke="#00AE42" stroke-width="3.3" stroke-miterlimit="10" stroke-linecap="round"/>
+<path d="M14.5999 1.40002L1.3999 14.6" stroke="#009688" stroke-width="3.3" stroke-miterlimit="10" stroke-linecap="round"/>
+<path d="M1.3999 1.40002L14.5999 14.6" stroke="#009688" stroke-width="3.3" stroke-miterlimit="10" stroke-linecap="round"/>
 </g>
 <defs>
 <clipPath id="clip0_23_257">
--- a/resources/images/disable_ams_demo_icon.svg
+++ b/resources/images/disable_ams_demo_icon.svg
--- a/resources/images/enable_ams.svg
+++ b/resources/images/enable_ams.svg
@@ -1,4 +1,4 @@
 <svg width="16" height="17" viewBox="0 0 16 17" fill="none" xmlns="http://www.w3.org/2000/svg">
 <circle cx="8" cy="8.5" r="7.5" stroke="#CECECE"/>
-<path d="M8.43066 10.5674H6.90625C6.91081 10.1436 6.94727 9.78809 7.01562 9.50098C7.08398 9.20931 7.19792 8.94499 7.35742 8.70801C7.52148 8.47103 7.73796 8.22038 8.00684 7.95605C8.21647 7.75553 8.4056 7.56641 8.57422 7.38867C8.74284 7.20638 8.87728 7.01497 8.97754 6.81445C9.0778 6.60938 9.12793 6.37467 9.12793 6.11035C9.12793 5.82324 9.08008 5.57943 8.98438 5.37891C8.88867 5.17839 8.7474 5.02572 8.56055 4.9209C8.37826 4.81608 8.15039 4.76367 7.87695 4.76367C7.64909 4.76367 7.4349 4.80924 7.23438 4.90039C7.03385 4.98698 6.87207 5.1237 6.74902 5.31055C6.62598 5.49284 6.5599 5.73438 6.55078 6.03516H4.90332C4.91243 5.46094 5.04915 4.97786 5.31348 4.58594C5.5778 4.19401 5.93327 3.90007 6.37988 3.7041C6.8265 3.50814 7.32552 3.41016 7.87695 3.41016C8.48763 3.41016 9.00944 3.51497 9.44238 3.72461C9.87533 3.92969 10.2057 4.23047 10.4336 4.62695C10.666 5.01888 10.7822 5.49284 10.7822 6.04883C10.7822 6.44987 10.7025 6.81445 10.543 7.14258C10.3835 7.46615 10.1761 7.76921 9.9209 8.05176C9.66569 8.32975 9.38997 8.60775 9.09375 8.88574C8.83854 9.11816 8.66536 9.37109 8.57422 9.64453C8.48307 9.91341 8.43522 10.221 8.43066 10.5674ZM6.76953 12.7002C6.76953 12.4541 6.85384 12.2467 7.02246 12.0781C7.19108 11.9049 7.42122 11.8184 7.71289 11.8184C8.00456 11.8184 8.2347 11.9049 8.40332 12.0781C8.57194 12.2467 8.65625 12.4541 8.65625 12.7002C8.65625 12.9463 8.57194 13.1559 8.40332 13.3291C8.2347 13.4977 8.00456 13.582 7.71289 13.582C7.42122 13.582 7.19108 13.4977 7.02246 13.3291C6.85384 13.1559 6.76953 12.9463 6.76953 12.7002Z" fill="#00AE42"/>
+<path d="M8.43066 10.5674H6.90625C6.91081 10.1436 6.94727 9.78809 7.01562 9.50098C7.08398 9.20931 7.19792 8.94499 7.35742 8.70801C7.52148 8.47103 7.73796 8.22038 8.00684 7.95605C8.21647 7.75553 8.4056 7.56641 8.57422 7.38867C8.74284 7.20638 8.87728 7.01497 8.97754 6.81445C9.0778 6.60938 9.12793 6.37467 9.12793 6.11035C9.12793 5.82324 9.08008 5.57943 8.98438 5.37891C8.88867 5.17839 8.7474 5.02572 8.56055 4.9209C8.37826 4.81608 8.15039 4.76367 7.87695 4.76367C7.64909 4.76367 7.4349 4.80924 7.23438 4.90039C7.03385 4.98698 6.87207 5.1237 6.74902 5.31055C6.62598 5.49284 6.5599 5.73438 6.55078 6.03516H4.90332C4.91243 5.46094 5.04915 4.97786 5.31348 4.58594C5.5778 4.19401 5.93327 3.90007 6.37988 3.7041C6.8265 3.50814 7.32552 3.41016 7.87695 3.41016C8.48763 3.41016 9.00944 3.51497 9.44238 3.72461C9.87533 3.92969 10.2057 4.23047 10.4336 4.62695C10.666 5.01888 10.7822 5.49284 10.7822 6.04883C10.7822 6.44987 10.7025 6.81445 10.543 7.14258C10.3835 7.46615 10.1761 7.76921 9.9209 8.05176C9.66569 8.32975 9.38997 8.60775 9.09375 8.88574C8.83854 9.11816 8.66536 9.37109 8.57422 9.64453C8.48307 9.91341 8.43522 10.221 8.43066 10.5674ZM6.76953 12.7002C6.76953 12.4541 6.85384 12.2467 7.02246 12.0781C7.19108 11.9049 7.42122 11.8184 7.71289 11.8184C8.00456 11.8184 8.2347 11.9049 8.40332 12.0781C8.57194 12.2467 8.65625 12.4541 8.65625 12.7002C8.65625 12.9463 8.57194 13.1559 8.40332 13.3291C8.2347 13.4977 8.00456 13.582 7.71289 13.582C7.42122 13.582 7.19108 13.4977 7.02246 13.3291C6.85384 13.1559 6.76953 12.9463 6.76953 12.7002Z" fill="#009688"/>
 </svg>
--- a/resources/images/fan_dash_bk.svg
+++ b/resources/images/fan_dash_bk.svg
@@ -1,6 +1,6 @@
 <svg width="100" height="100" viewBox="0 0 100 100" fill="none" xmlns="http://www.w3.org/2000/svg">
 <g clip-path="url(#clip0_44_12301)">
-<path fill-rule="evenodd" clip-rule="evenodd" d="M32.2533 15.2624C37.018 12.8234 42.3505 11.3358 48 11.0504V13.0531C42.7143 13.3347 37.7231 14.7256 33.2549 16.9972L32.2533 15.2624ZM28.791 17.2656C24.1876 20.2544 20.2542 24.1879 17.2655 28.7913L19.0002 29.7929C21.81 25.4912 25.4909 21.8102 29.7926 19.0004L28.791 17.2656ZM11.0504 48C11.3358 42.3506 12.8233 37.0183 15.2623 32.2536L16.997 33.2552C14.7255 37.7233 13.3347 42.7145 13.0532 48H11.0504ZM70.2069 81C74.5088 78.1901 78.1899 74.509 80.9998 70.2072L82.7345 71.2087C79.7457 75.8124 75.8121 79.7459 71.2084 82.7347L70.2069 81ZM88.9496 52C88.6643 57.6494 87.1767 62.9818 84.7377 67.7465L83.003 66.7449C85.2745 62.2768 86.6654 57.2856 86.9469 52H88.9496ZM52 11.0504V13.0531C57.2855 13.3347 62.2765 14.7254 66.7446 16.9969L67.7462 15.2621C62.9816 12.8232 57.6493 11.3358 52 11.0504ZM71.2085 17.2653L70.2069 19C74.5088 21.8099 78.1899 25.491 80.9998 29.7929L82.7346 28.7913C79.7458 24.1877 75.8121 20.2541 71.2085 17.2653ZM29.7926 80.9996C25.491 78.1898 21.81 74.5089 19.0002 70.2072L17.2655 71.2087C20.2542 75.8122 24.1876 79.7456 28.7911 82.7344L29.7926 80.9996ZM13.0532 52C13.3347 57.2856 14.7255 62.2767 16.9971 66.7449L15.2623 67.7465C12.8233 62.9818 11.3358 57.6494 11.0504 52H13.0532ZM84.7378 32.2536L83.003 33.2552C85.2745 37.7233 86.6654 42.7144 86.9469 48H88.9496C88.6643 42.3506 87.1767 37.0182 84.7378 32.2536Z" fill="#00AE42"/>
+<path fill-rule="evenodd" clip-rule="evenodd" d="M32.2533 15.2624C37.018 12.8234 42.3505 11.3358 48 11.0504V13.0531C42.7143 13.3347 37.7231 14.7256 33.2549 16.9972L32.2533 15.2624ZM28.791 17.2656C24.1876 20.2544 20.2542 24.1879 17.2655 28.7913L19.0002 29.7929C21.81 25.4912 25.4909 21.8102 29.7926 19.0004L28.791 17.2656ZM11.0504 48C11.3358 42.3506 12.8233 37.0183 15.2623 32.2536L16.997 33.2552C14.7255 37.7233 13.3347 42.7145 13.0532 48H11.0504ZM70.2069 81C74.5088 78.1901 78.1899 74.509 80.9998 70.2072L82.7345 71.2087C79.7457 75.8124 75.8121 79.7459 71.2084 82.7347L70.2069 81ZM88.9496 52C88.6643 57.6494 87.1767 62.9818 84.7377 67.7465L83.003 66.7449C85.2745 62.2768 86.6654 57.2856 86.9469 52H88.9496ZM52 11.0504V13.0531C57.2855 13.3347 62.2765 14.7254 66.7446 16.9969L67.7462 15.2621C62.9816 12.8232 57.6493 11.3358 52 11.0504ZM71.2085 17.2653L70.2069 19C74.5088 21.8099 78.1899 25.491 80.9998 29.7929L82.7346 28.7913C79.7458 24.1877 75.8121 20.2541 71.2085 17.2653ZM29.7926 80.9996C25.491 78.1898 21.81 74.5089 19.0002 70.2072L17.2655 71.2087C20.2542 75.8122 24.1876 79.7456 28.7911 82.7344L29.7926 80.9996ZM13.0532 52C13.3347 57.2856 14.7255 62.2767 16.9971 66.7449L15.2623 67.7465C12.8233 62.9818 11.3358 57.6494 11.0504 52H13.0532ZM84.7378 32.2536L83.003 33.2552C85.2745 37.7233 86.6654 42.7144 86.9469 48H88.9496C88.6643 42.3506 87.1767 37.0182 84.7378 32.2536Z" fill="#009688"/>
 <path fill-rule="evenodd" clip-rule="evenodd" d="M4.46154 50C4.46154 24.8498 24.8498 4.46154 50 4.46154C75.1502 4.46154 95.5385 24.8498 95.5385 50C95.5385 66.1387 87.1432 80.3165 74.4817 88.4047L75.7138 90.5387C89.1106 82.0233 98 67.0498 98 50C98 23.4903 76.5097 2 50 2C23.4903 2 2 23.4903 2 50C2 67.0493 10.8889 82.0225 24.2851 90.538L25.5172 88.404C12.8563 80.3157 4.46154 66.1382 4.46154 50Z" fill="#6B6B6B"/>
 </g>
 <defs>
--- a/resources/images/filament.svg
+++ b/resources/images/filament.svg
@@ -1,6 +1,6 @@
 <svg width="16" height="16" viewBox="0 0 16 16" fill="none" xmlns="http://www.w3.org/2000/svg">
-<path fill-rule="evenodd" clip-rule="evenodd" d="M9.33588 3.76194C9.07655 4.7013 8.91113 6.02735 8.91113 7.51158C8.91113 8.9958 9.07655 10.3219 9.33588 11.2612C9.46652 11.7344 9.61331 12.0809 9.75541 12.2974C9.83934 12.4253 9.8985 12.4751 9.92755 12.494C9.93252 12.4906 9.93828 12.4865 9.94482 12.4814C9.9912 12.4453 10.0542 12.3776 10.1167 12.2709C10.2561 12.0326 10.5624 11.9524 10.8007 12.0919C11.0391 12.2314 11.1192 12.5377 10.9797 12.776C10.8665 12.9694 10.7246 13.1418 10.5587 13.2708C10.3964 13.397 10.1813 13.5036 9.93341 13.5036C9.46152 13.5036 9.12952 13.1663 8.91939 12.8461C8.69647 12.5065 8.51575 12.0482 8.37194 11.5273C8.08237 10.4785 7.91113 9.05848 7.91113 7.51158C7.91113 5.96467 8.08237 4.5447 8.37194 3.49582C8.51575 2.97492 8.69647 2.5167 8.91939 2.17706C9.12952 1.8569 9.46152 1.51953 9.93341 1.51953C10.3928 1.51953 10.7291 1.84579 10.9381 2.1671C11.0886 2.3986 11.023 2.70831 10.7915 2.85885C10.56 3.0094 10.2503 2.94377 10.0997 2.71227C10.0355 2.61343 9.98026 2.55954 9.9446 2.53382C9.94015 2.5306 9.93625 2.52799 9.93288 2.52588C9.90617 2.54182 9.84486 2.58947 9.75541 2.72576C9.61331 2.94227 9.46652 3.28872 9.33588 3.76194Z" fill="#00AE42"/>
-<path fill-rule="evenodd" clip-rule="evenodd" d="M6.44623 3.62131C6.1869 4.56068 6.02148 5.88673 6.02148 7.37095C6.02148 8.85518 6.1869 10.1812 6.44623 11.1206C6.57688 11.5938 6.72366 11.9403 6.86576 12.1568C6.94969 12.2847 7.00886 12.3345 7.0379 12.3533C7.04287 12.35 7.04863 12.3458 7.05517 12.3408C7.10155 12.3047 7.16455 12.237 7.227 12.1303C7.36649 11.8919 7.67276 11.8118 7.91109 11.9513C8.14941 12.0908 8.22954 12.3971 8.09005 12.6354C7.97686 12.8288 7.83494 13.0012 7.66908 13.1301C7.50671 13.2564 7.29164 13.363 7.04376 13.363C6.57187 13.363 6.23987 13.0256 6.02974 12.7055C5.80682 12.3658 5.6261 11.9076 5.48229 11.3867C5.19273 10.3378 5.02148 8.91786 5.02148 7.37095C5.02148 5.82405 5.19273 4.40407 5.48229 3.3552C5.6261 2.8343 5.80682 2.37608 6.02974 2.03643C6.23987 1.71628 6.57187 1.37891 7.04376 1.37891C7.50318 1.37891 7.83947 1.70517 8.04842 2.02648C8.19896 2.25798 8.13334 2.56768 7.90184 2.71823C7.67034 2.86877 7.36063 2.80314 7.21009 2.57165C7.14582 2.47281 7.09061 2.41891 7.05496 2.39319C7.0505 2.38998 7.0466 2.38737 7.04324 2.38525C7.01653 2.40119 6.95521 2.44885 6.86576 2.58514C6.72366 2.80164 6.57688 3.14809 6.44623 3.62131Z" fill="#00AE42"/>
+<path fill-rule="evenodd" clip-rule="evenodd" d="M9.33588 3.76194C9.07655 4.7013 8.91113 6.02735 8.91113 7.51158C8.91113 8.9958 9.07655 10.3219 9.33588 11.2612C9.46652 11.7344 9.61331 12.0809 9.75541 12.2974C9.83934 12.4253 9.8985 12.4751 9.92755 12.494C9.93252 12.4906 9.93828 12.4865 9.94482 12.4814C9.9912 12.4453 10.0542 12.3776 10.1167 12.2709C10.2561 12.0326 10.5624 11.9524 10.8007 12.0919C11.0391 12.2314 11.1192 12.5377 10.9797 12.776C10.8665 12.9694 10.7246 13.1418 10.5587 13.2708C10.3964 13.397 10.1813 13.5036 9.93341 13.5036C9.46152 13.5036 9.12952 13.1663 8.91939 12.8461C8.69647 12.5065 8.51575 12.0482 8.37194 11.5273C8.08237 10.4785 7.91113 9.05848 7.91113 7.51158C7.91113 5.96467 8.08237 4.5447 8.37194 3.49582C8.51575 2.97492 8.69647 2.5167 8.91939 2.17706C9.12952 1.8569 9.46152 1.51953 9.93341 1.51953C10.3928 1.51953 10.7291 1.84579 10.9381 2.1671C11.0886 2.3986 11.023 2.70831 10.7915 2.85885C10.56 3.0094 10.2503 2.94377 10.0997 2.71227C10.0355 2.61343 9.98026 2.55954 9.9446 2.53382C9.94015 2.5306 9.93625 2.52799 9.93288 2.52588C9.90617 2.54182 9.84486 2.58947 9.75541 2.72576C9.61331 2.94227 9.46652 3.28872 9.33588 3.76194Z" fill="#009688"/>
+<path fill-rule="evenodd" clip-rule="evenodd" d="M6.44623 3.62131C6.1869 4.56068 6.02148 5.88673 6.02148 7.37095C6.02148 8.85518 6.1869 10.1812 6.44623 11.1206C6.57688 11.5938 6.72366 11.9403 6.86576 12.1568C6.94969 12.2847 7.00886 12.3345 7.0379 12.3533C7.04287 12.35 7.04863 12.3458 7.05517 12.3408C7.10155 12.3047 7.16455 12.237 7.227 12.1303C7.36649 11.8919 7.67276 11.8118 7.91109 11.9513C8.14941 12.0908 8.22954 12.3971 8.09005 12.6354C7.97686 12.8288 7.83494 13.0012 7.66908 13.1301C7.50671 13.2564 7.29164 13.363 7.04376 13.363C6.57187 13.363 6.23987 13.0256 6.02974 12.7055C5.80682 12.3658 5.6261 11.9076 5.48229 11.3867C5.19273 10.3378 5.02148 8.91786 5.02148 7.37095C5.02148 5.82405 5.19273 4.40407 5.48229 3.3552C5.6261 2.8343 5.80682 2.37608 6.02974 2.03643C6.23987 1.71628 6.57187 1.37891 7.04376 1.37891C7.50318 1.37891 7.83947 1.70517 8.04842 2.02648C8.19896 2.25798 8.13334 2.56768 7.90184 2.71823C7.67034 2.86877 7.36063 2.80314 7.21009 2.57165C7.14582 2.47281 7.09061 2.41891 7.05496 2.39319C7.0505 2.38998 7.0466 2.38737 7.04324 2.38525C7.01653 2.40119 6.95521 2.44885 6.86576 2.58514C6.72366 2.80164 6.57688 3.14809 6.44623 3.62131Z" fill="#009688"/>
 <path fill-rule="evenodd" clip-rule="evenodd" d="M12.4339 3.03967C12.1256 4.16401 11.9287 5.74556 11.9287 7.51243C11.9287 9.2793 12.1256 10.8608 12.4339 11.9852C12.5891 12.5509 12.7648 12.9726 12.9389 13.2411C13.0254 13.3745 13.0997 13.4516 13.1536 13.4918C13.1793 13.511 13.1967 13.5191 13.2055 13.5224C13.2099 13.524 13.2125 13.5245 13.2135 13.5247L13.2144 13.5248L13.2145 13.5249L13.2145 13.5249L13.2145 13.5249L13.2145 13.5248L13.2155 13.5247C13.2165 13.5245 13.219 13.524 13.2234 13.5224C13.2322 13.5191 13.2496 13.511 13.2753 13.4918C13.3292 13.4516 13.4035 13.3745 13.49 13.2411C13.6641 12.9726 13.8398 12.5509 13.995 11.9852C14.3033 10.8608 14.5002 9.2793 14.5002 7.51243C14.5002 5.74556 14.3033 4.16401 13.995 3.03967C13.8398 2.47393 13.6641 2.05228 13.49 1.78377C13.4035 1.65031 13.3292 1.57326 13.2753 1.53303C13.2496 1.51388 13.2322 1.50576 13.2234 1.5025C13.219 1.50089 13.2165 1.50033 13.2155 1.50014L13.2145 1.50001L13.2145 1.5L13.2145 1.5L13.2145 1.5L13.2144 1.50001L13.2135 1.50014C13.2125 1.50033 13.2099 1.50089 13.2055 1.5025C13.1967 1.50576 13.1793 1.51388 13.1536 1.53303C13.0997 1.57326 13.0254 1.65031 12.9389 1.78377C12.7648 2.05228 12.5891 2.47393 12.4339 3.03967ZM12.0998 1.23979C12.3389 0.870982 12.7044 0.5 13.2145 0.5C13.7245 0.5 14.09 0.870981 14.3291 1.23979C14.5823 1.63037 14.7913 2.16244 14.9594 2.77522C15.2974 4.00791 15.5002 5.68258 15.5002 7.51243C15.5002 9.34227 15.2974 11.0169 14.9594 12.2496C14.7913 12.8624 14.5823 13.3945 14.3291 13.7851C14.09 14.1539 13.7245 14.5249 13.2145 14.5249C12.7044 14.5249 12.3389 14.1539 12.0998 13.7851C11.8466 13.3945 11.6376 12.8624 11.4695 12.2496C11.1315 11.0169 10.9287 9.34227 10.9287 7.51243C10.9287 5.68258 11.1315 4.00791 11.4695 2.77522C11.6376 2.16244 11.8466 1.63037 12.0998 1.23979Z" fill="#6B6B6B"/>
 <path fill-rule="evenodd" clip-rule="evenodd" d="M3.01557 3.02614C2.70181 4.1412 2.5 5.71408 2.5 7.48242C2.5 9.25215 2.69477 10.8337 3.00193 11.9573C3.15648 12.5226 3.33188 12.9434 3.50598 13.2111C3.59246 13.3441 3.66683 13.4209 3.721 13.461C3.74681 13.4802 3.7646 13.4885 3.774 13.4919C3.77866 13.4936 3.78163 13.4943 3.7831 13.4946C3.78452 13.4948 3.78529 13.4948 3.78575 13.4948H3.78588C3.7903 13.4949 3.85376 13.4953 3.97588 13.3519C4.10013 13.2059 4.23682 12.9638 4.37383 12.6126C4.47421 12.3554 4.76413 12.2282 5.02138 12.3286C5.27863 12.429 5.40581 12.7189 5.30543 12.9761C5.1497 13.3753 4.96437 13.7334 4.73733 14.0001C4.50962 14.2676 4.19256 14.4948 3.78575 14.4948C3.27511 14.4948 2.9084 14.1265 2.66765 13.7563C2.41362 13.3657 2.20478 12.8336 2.03732 12.221C1.70044 10.9887 1.5 9.31402 1.5 7.48242C1.5 5.64941 1.70803 3.98109 2.05295 2.75527C2.22444 2.14583 2.43753 1.61741 2.69504 1.22977C2.93958 0.861668 3.30814 0.5 3.81502 0.5C4.24247 0.5 4.56888 0.76546 4.79349 1.05099C5.02411 1.34416 5.21464 1.73907 5.37035 2.18601C5.4612 2.44678 5.32345 2.73182 5.06267 2.82267C4.8019 2.91352 4.51686 2.77577 4.42601 2.515C4.28897 2.12163 4.14285 1.84128 4.00754 1.66927C3.89009 1.51998 3.82273 1.50192 3.81343 1.50008C3.81142 1.50027 3.80748 1.50096 3.80091 1.50334C3.79069 1.50704 3.77223 1.51559 3.74588 1.53481C3.6907 1.57505 3.61546 1.65145 3.52799 1.78311C3.35188 2.04821 3.17342 2.46514 3.01557 3.02614Z" fill="#6B6B6B"/>
 </svg>
--- a/resources/images/flag_green.svg
+++ b/resources/images/flag_green.svg
@@ -1,3 +1,3 @@
 <svg width="16" height="16" viewBox="0 0 16 16" fill="none" xmlns="http://www.w3.org/2000/svg">
-<rect width="16" height="16" fill="#00AE42" fill-opacity="0.5"/>
+<rect width="16" height="16" fill="#009688" fill-opacity="0.5"/>
 </svg>
--- a/resources/images/flag_red.svg
+++ b/resources/images/flag_red.svg
@@ -1,3 +1,3 @@
 <svg width="16" height="16" viewBox="0 0 16 16" fill="none" xmlns="http://www.w3.org/2000/svg">
-<rect width="16" height="16" fill="#00AE42" fill-opacity="0.5"/>
+<rect width="16" height="16" fill="#009688" fill-opacity="0.5"/>
 </svg>
--- a/Show More
+++ b/Show More