bump version to 1.3.1

build_release_macos.sh

@@ -6,12 +6,15 @@ mkdir -p build
 cd build
 DEPS=$PWD/BambuStudio_dep
 mkdir -p $DEPS
-cmake ../ -DDESTDIR="$DEPS" -DOPENSSL_ARCH="darwin64-$(uname -m)-cc" -DCMAKE_BUILD_TYPE=Release 
+cmake ../ -DDESTDIR="$DEPS" -DOPENSSL_ARCH="darwin64-$(uname -m)-cc" -DCMAKE_BUILD_TYPE=Release
 make -j10
 
 cd $WD
 mkdir -p build
 cd build
 cmake .. -DBBL_RELEASE_TO_PUBLIC=0 -DCMAKE_PREFIX_PATH="$DEPS/usr/local" -DCMAKE_INSTALL_PREFIX="$PWD/BambuStudio-SoftFever" -DCMAKE_BUILD_TYPE=Release -DCMAKE_MACOSX_RPATH=ON -DCMAKE_INSTALL_RPATH="$DEPS/usr/local" -DCMAKE_MACOSX_BUNDLE=ON
-cmake --build . --config Release --target all
+cmake --build . --config Release --target all -j10
 cmake --build . --target install --config Release -j10
+cd BambuStudio-SoftFever
+cp -r bin/BambuStudio.app/Contents/MacOS BambuStudio.app/Contents
+cp -r bin/BambuStudio.app/Contents/Info.plist BambuStudio.app/Contents/

src/libslic3r/GCode.cpp

@@ -908,6 +908,11 @@ void GCode::do_export(Print* print, const char* path, GCodeProcessorResult* resu
     BOOST_LOG_TRIVIAL(info) << boost::format("Will export G-code to %1% soon")%path;
     print->set_started(psGCodeExport);
 
+    if (print->is_BBL_printer())
+      gcode_label_objects = false;
+    else
+      gcode_label_objects = true;
+
     // check if any custom gcode contains keywords used by the gcode processor to
     // produce time estimation and gcode toolpaths
     std::vector<std::pair<std::string, std::string>> validation_res = DoExport::validate_custom_gcode(*print);
@@ -1285,7 +1290,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
 
     // modifies m_silent_time_estimator_enabled
     DoExport::init_gcode_processor(print.config(), m_processor, m_silent_time_estimator_enabled);
-
+    const bool is_bbl_printers = print.is_BBL_printer();
     // resets analyzer's tracking data
     m_last_height  = 0.f;
     m_last_layer_z = 0.f;
@@ -1349,19 +1354,50 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
     file.write_format(";%s\n", GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Estimated_Printing_Time_Placeholder).c_str());
     file.write_format("; HEADER_BLOCK_END\n\n");
 
-    //BBS: write global config at the beginning of gcode file because printer need these config information
-    // Append full config, delimited by two 'phony' configuration keys CONFIG_BLOCK_START and CONFIG_BLOCK_END.
-    // The delimiters are structured as configuration key / value pairs to be parsable by older versions of PrusaSlicer G-code viewer.
+    
+      // BBS: write global config at the beginning of gcode file because printer
+      // need these config information
+      // Append full config, delimited by two 'phony' configuration keys
+      // CONFIG_BLOCK_START and CONFIG_BLOCK_END. The delimiters are structured
+      // as configuration key / value pairs to be parsable by older versions of
+      // PrusaSlicer G-code viewer.
     {
-        file.write_format("; hack-fix: write fake slicer info here so that Moonraker will extract thumbs.\n");
-        file.write_format("; %s\n\n",std::string(std::string("generated by SuperSlicer " SLIC3R_VERSION " on " ) + Slic3r::Utils::utc_timestamp()).c_str());
+      if (is_bbl_printers) {
+        file.write("; CONFIG_BLOCK_START\n");
+        std::string full_config;
+        append_full_config(print, full_config);
+        if (!full_config.empty())
+          file.write(full_config);
+
+        // SoftFever: write compatiple image
+        std::vector<int> temps_per_bed;
+        int first_layer_bed_temperature = 0;
+        get_bed_temperature(0, true, temps_per_bed,
+                            first_layer_bed_temperature);
+        file.write_format("; first_layer_bed_temperature = %d\n",
+                          first_layer_bed_temperature);
+        file.write_format(
+            "; first_layer_temperature = %d\n",
+            print.config().nozzle_temperature_initial_layer.get_at(0));
+        file.write("; CONFIG_BLOCK_END\n\n");
+      } else {
+        file.write_format("; hack-fix: write fake slicer info here so that "
+                          "Moonraker will extract thumbs.\n");
+        file.write_format(
+            "; %s\n\n",
+            std::string(
+                std::string("generated by SuperSlicer " SLIC3R_VERSION " on ") +
+                Slic3r::Utils::utc_timestamp())
+                .c_str());
+
+        // BBS: add plate id into thumbnail render logic
+        DoExport::export_thumbnails_to_file(
+            thumbnail_cb, print.get_plate_index(), {Vec2d(300, 300)},
+            [&file](const char *sz) { file.write(sz); },
+            [&print]() { print.throw_if_canceled(); });
+      }
     }
-
-    //BBS: add plate id into thumbnail render logic
-    DoExport::export_thumbnails_to_file(thumbnail_cb, print.get_plate_index(), { Vec2d(300, 300) },
-       [&file](const char* sz) { file.write(sz); },
-       [&print]() { print.throw_if_canceled(); });
-
+    
 
     // Write some terse information on the slicing parameters.
     const PrintObject *first_object         = print.objects().front();
@@ -1504,7 +1540,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
         m_placeholder_parser.set("first_layer_print_max",  new ConfigOptionFloats({ bbox.max.x(), bbox.max.y() }));
         m_placeholder_parser.set("first_layer_print_size", new ConfigOptionFloats({ bbox.size().x(), bbox.size().y() }));
     }
-
+    float outer_wall_volumetric_speed = 0.0f;
     {
         int curr_bed_type = m_config.curr_bed_type.getInt();
 
@@ -1528,7 +1564,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
             }
             Flow outer_wall_flow = Flow(outer_wall_line_width, m_config.layer_height, m_config.nozzle_diameter.get_at(initial_extruder_id));
             float outer_wall_speed = print.default_region_config().outer_wall_speed.value;
-            float outer_wall_volumetric_speed = outer_wall_speed * outer_wall_flow.mm3_per_mm();
+            outer_wall_volumetric_speed = outer_wall_speed * outer_wall_flow.mm3_per_mm();
             if (outer_wall_volumetric_speed > filament_max_volumetric_speed)
                 outer_wall_volumetric_speed = filament_max_volumetric_speed;
             m_placeholder_parser.set("outer_wall_volumetric_speed", new ConfigOptionFloat(outer_wall_volumetric_speed));
@@ -1591,12 +1627,20 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
     if (this->m_objsWithBrim.empty() && this->m_objSupportsWithBrim.empty()) m_brim_done = true;
 
     //BBS: open spaghetti detector
-    // if (print.config().spaghetti_detector.value)
-        file.write("M981 S1 P20000 ;open spaghetti detector\n");
-    if(m_config.enable_pressure_advance.value)
-    {
-        file.write_format("M900 K%.3f ; Override pressure advance value\n",m_config.pressure_advance.values.front());
+    if (is_bbl_printers) {
+      // if (print.config().spaghetti_detector.value)
+      file.write("M981 S1 P20000 ;open spaghetti detector\n");
+      file.write_format("M900 K%.3f M%0.3f ; Override pressure advance value\n",
+                        m_config.pressure_advance.values.front(),
+                        outer_wall_volumetric_speed / (1.75 * 1.75 / 4 * 3.14) *
+                            m_config.pressure_advance.values.front());
+    } else {
+      if (m_config.enable_pressure_advance.value) {
+        file.write_format("M900 K%.3f ; Override pressure advance value\n",
+                          m_config.pressure_advance.values.front());
+      }
     }
+
     // Do all objects for each layer.
     if (print.config().print_sequence == PrintSequence::ByObject) {
         size_t finished_objects = 0;
@@ -1659,7 +1703,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
             this->process_layers(print, tool_ordering, collect_layers_to_print(object), *print_object_instance_sequential_active - object.instances().data(), file, prime_extruder);
             //BBS: close powerlost recovery
             {
-                if (m_second_layer_things_done) {
+                if (is_bbl_printers && m_second_layer_things_done) {
                     file.write("; close powerlost recovery\n");
                     file.write("M1003 S0\n");
                 }
@@ -1730,7 +1774,7 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
         this->process_layers(print, tool_ordering, print_object_instances_ordering, layers_to_print, file);
         //BBS: close powerlost recovery
         {
-            if (m_second_layer_things_done) {
+            if (is_bbl_printers && m_second_layer_things_done) {
                 file.write("; close powerlost recovery\n");
                 file.write("M1003 S0\n");
             }
@@ -1796,27 +1840,40 @@ void GCode::_do_export(Print& print, GCodeOutputStream &file, ThumbnailsGenerato
         m_writer.extruders(),
         // Modifies
         print.m_print_statistics));
-    file.write("\n");
-    file.write("; CONFIG_BLOCK_START\n");
-    std::string full_config;
-    append_full_config(print, full_config);
-    if (!full_config.empty())
+    if (!is_bbl_printers) {
+      file.write("\n");
+      file.write("; CONFIG_BLOCK_START\n");
+      std::string full_config;
+      append_full_config(print, full_config);
+      if (!full_config.empty())
         file.write(full_config);
 
-    // SoftFever: write compatiple image
-    std::vector<int> temps_per_bed;
-    int first_layer_bed_temperature = 0;
-    get_bed_temperature(0, true, temps_per_bed, first_layer_bed_temperature);
-    file.write_format("; first_layer_bed_temperature = %d\n", first_layer_bed_temperature);
-    file.write_format("; first_layer_temperature = %d\n", print.config().nozzle_temperature_initial_layer.get_at(0));
-    file.write("; CONFIG_BLOCK_END\n\n");
-    file.write_format("; total filament used [g] = %.2lf\n", print.m_print_statistics.total_weight);
-    file.write_format("; total filament cost = %.2lf\n", print.m_print_statistics.total_cost);
-    if (print.m_print_statistics.total_toolchanges > 0)
-    	file.write_format("; total filament change = %i\n", print.m_print_statistics.total_toolchanges);
+      // SoftFever: write compatiple info
+      std::vector<int> temps_per_bed;
+      int first_layer_bed_temperature = 0;
+      get_bed_temperature(0, true, temps_per_bed, first_layer_bed_temperature);
+      file.write_format("; first_layer_bed_temperature = %d\n",
+                        first_layer_bed_temperature);
+      file.write_format(
+          "; first_layer_temperature = %d\n",
+          print.config().nozzle_temperature_initial_layer.get_at(0));
+      file.write("; CONFIG_BLOCK_END\n\n");
+      file.write_format("; total filament used [g] = %.2lf\n",
+                        print.m_print_statistics.total_weight);
+      file.write_format("; total filament cost = %.2lf\n",
+                        print.m_print_statistics.total_cost);
+      if (print.m_print_statistics.total_toolchanges > 0)
+        file.write_format("; total filament change = %i\n",
+                          print.m_print_statistics.total_toolchanges);
 
-    file.write_format("; total layers count = %i\n", m_layer_count);
-    file.write_format(";%s\n", GCodeProcessor::reserved_tag(GCodeProcessor::ETags::Estimated_Printing_Time_Placeholder).c_str());
+      file.write_format("; total layers count = %i\n", m_layer_count);
+      file.write_format(
+          ";%s\n",
+          GCodeProcessor::reserved_tag(
+              GCodeProcessor::ETags::Estimated_Printing_Time_Placeholder)
+              .c_str());
+
+    }
 
     print.throw_if_canceled();
 }
@@ -2522,20 +2579,21 @@ GCode::LayerResult GCode::process_layer(
     }
 
     if (! first_layer && ! m_second_layer_things_done) {
-        //BBS: open powerlost recovery
+      if (print.is_BBL_printer()) {
+        // BBS: open powerlost recovery
         {
-            gcode += "; open powerlost recovery\n";
-            gcode += "M1003 S1\n";
+          gcode += "; open powerlost recovery\n";
+          gcode += "M1003 S1\n";
         }
         // BBS: open first layer inspection at second layer
         if (print.config().scan_first_layer.value) {
-            // BBS: retract first to avoid droping when scan model
-            gcode += this->retract();
-            gcode += "M976 S1 P1 ; scan model before printing 2nd layer\n";
-            gcode += "M400 P100\n";
-            gcode += this->unretract();
+          // BBS: retract first to avoid droping when scan model
+          gcode += this->retract();
+          gcode += "M976 S1 P1 ; scan model before printing 2nd layer\n";
+          gcode += "M400 P100\n";
+          gcode += this->unretract();
         }
-
+      }
         //BBS:  reset acceleration at sencond layer
         if (m_config.default_acceleration.value > 0 && m_config.initial_layer_acceleration.value > 0) {
             double acceleration = m_config.default_acceleration.value;

src/libslic3r/Print.hpp

@@ -728,7 +728,11 @@ public:
     // Return 4 wipe tower corners in the world coordinates (shifted and rotated), including the wipe tower brim.
     std::vector<Point>  first_layer_wipe_tower_corners(bool check_wipe_tower_existance=true) const;
 
-protected:
+    //SoftFever
+    bool &is_BBL_printer() { return m_isBBLPrinter; }
+    const bool is_BBL_printer() const { return m_isBBLPrinter; }
+
+  protected:
     // Invalidates the step, and its depending steps in Print.
     bool                invalidate_step(PrintStep step);
 
@@ -750,6 +754,9 @@ private:
     PrintRegionConfig                       m_default_region_config;
     PrintObjectPtrs                         m_objects;
     PrintRegionPtrs                         m_print_regions;
+    
+    //SoftFever
+    bool m_isBBLPrinter;
 
     // Ordered collections of extrusion paths to build skirt loops and brim.
     ExtrusionEntityCollection               m_skirt;

src/libslic3r/PrintConfig.cpp

@@ -998,7 +998,7 @@ void PrintConfigDef::init_fff_params()
     def->enum_labels.push_back("3");
     def->enum_labels.push_back("4");
     def->enum_labels.push_back("5");
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
 
     def = this->add("extruder_clearance_height_to_rod", coFloat);
     def->label = L("Height to rod");
@@ -1032,7 +1032,7 @@ void PrintConfigDef::init_fff_params()
     def->tooltip = L("Only used as a visual help on UI");
     def->gui_type = ConfigOptionDef::GUIType::color;
     // Empty string means no color assigned yet.
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionStrings { "" });
 
     def = this->add("extruder_offset", coPoints);
@@ -1042,7 +1042,7 @@ void PrintConfigDef::init_fff_params()
     //               "with respect to the first one. It expects positive coordinates (they will be subtracted "
     //               "from the XY coordinate).");
     def->sidetext = L("mm");
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionPoints { Vec2d(0,0) });
 
     def = this->add("filament_flow_ratio", coFloats);
@@ -1097,7 +1097,7 @@ void PrintConfigDef::init_fff_params()
     def->label = L("Color");
     def->tooltip = L("Only used as a visual help on UI");
     def->gui_type = ConfigOptionDef::GUIType::color;
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionStrings{ "#00AE42" });
 
     def = this->add("filament_max_volumetric_speed", coFloats);
@@ -1112,13 +1112,13 @@ void PrintConfigDef::init_fff_params()
 
     def = this->add("filament_minimal_purge_on_wipe_tower", coFloats);
     def->label = L("Minimal purge on wipe tower");
-    //def->tooltip = L("After a tool change, the exact position of the newly loaded filament inside "
-    //                 "the nozzle may not be known, and the filament pressure is likely not yet stable. "
-    //                 "Before purging the print head into an infill or a sacrificial object, Slic3r will always prime "
-    //                 "this amount of material into the wipe tower to produce successive infill or sacrificial object extrusions reliably.");
+    def->tooltip = L("After a tool change, the exact position of the newly loaded filament inside "
+                    "the nozzle may not be known, and the filament pressure is likely not yet stable. "
+                    "Before purging the print head into an infill or a sacrificial object, Slic3r will always prime "
+                    "this amount of material into the wipe tower to produce successive infill or sacrificial object extrusions reliably.");
     def->sidetext = L("mm³");
     def->min = 0;
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionFloats { 15. });
 
     def = this->add("machine_load_filament_time", coFloat);
@@ -1455,7 +1455,7 @@ void PrintConfigDef::init_fff_params()
     def->tooltip = L("The width within which to jitter. It's adversed to be below outer wall line width");
     def->sidetext = L("mm");
     def->min = 0;
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionFloat(0.3));
 
     def = this->add("fuzzy_skin_point_distance", coFloat);
@@ -1463,7 +1463,7 @@ void PrintConfigDef::init_fff_params()
     def->category = L("Others");
     def->tooltip = L("The average diatance between the random points introducded on each line segment");
     def->sidetext = L("mm");
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionFloat(0.8));
 
     def = this->add("gap_infill_speed", coFloat);
@@ -1515,13 +1515,13 @@ void PrintConfigDef::init_fff_params()
     def->enum_labels.push_back(L("Hardened steel"));
     def->enum_labels.push_back(L("Stainless steel"));
     def->enum_labels.push_back(L("Brass"));
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionEnum<NozzleType>(ntUndefine));
 
     def = this->add("auxiliary_fan", coBool);
     def->label = L("Auxiliary part cooling fan");
     def->tooltip = L("Enable this option if machine has auxiliary part cooling fan");
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionBool(false));
 
     def = this->add("gcode_flavor", coEnum);
@@ -1618,13 +1618,13 @@ void PrintConfigDef::init_fff_params()
     def->cli = ConfigOptionDef::nocli;
 
     def = this->add("interface_shells", coBool);
-    //def->label = L("Interface shells");
+    def->label = L("Interface shells");
     def->label = "Interface shells";
-    //def->tooltip = L("Force the generation of solid shells between adjacent materials/volumes. "
-    //               "Useful for multi-extruder prints with translucent materials or manual soluble "
-    //               "support material");
+    def->tooltip = L("Force the generation of solid shells between adjacent materials/volumes. "
+                  "Useful for multi-extruder prints with translucent materials or manual soluble "
+                  "support material");
     def->category = L("Quality");
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionBool(false));
 
     def = this->add("ironing_type", coEnum);
@@ -1951,7 +1951,7 @@ void PrintConfigDef::init_fff_params()
     def->label = L("Nozzle volume");
     def->tooltip = L("Volume of nozzle between the cutter and the end of nozzle");
     def->sidetext = L("mm³");
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->readonly = true;
     def->set_default_value(new ConfigOptionFloat { 0.0 });
 
@@ -2055,7 +2055,7 @@ void PrintConfigDef::init_fff_params()
     def->tooltip = L("Z gap between object and raft. Ignored for soluble interface");
     def->sidetext = L("mm");
     def->min = 0;
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionFloat(0.1));
 
     def = this->add("raft_expansion", coFloat);
@@ -2064,7 +2064,7 @@ void PrintConfigDef::init_fff_params()
     def->tooltip = L("Expand all raft layers in XY plane");
     def->sidetext = L("mm");
     def->min = 0;
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionFloat(1.5));
 
     def = this->add("raft_first_layer_density", coPercent);
@@ -2074,7 +2074,7 @@ void PrintConfigDef::init_fff_params()
     def->sidetext = L("%");
     def->min = 10;
     def->max = 100;
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionPercent(90));
 
     def = this->add("raft_first_layer_expansion", coFloat);
@@ -2083,7 +2083,7 @@ void PrintConfigDef::init_fff_params()
     def->tooltip = L("Expand the first raft or support layer to improve bed plate adhesion");
     def->sidetext = L("mm");
     def->min = 0;
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     //BBS: change from 3.0 to 2.0
     def->set_default_value(new ConfigOptionFloat(2.0));
 
@@ -2095,7 +2095,7 @@ void PrintConfigDef::init_fff_params()
     def->sidetext = L("layers");
     def->min = 0;
     def->max = 100;
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionInt(0));
 
     def = this->add("resolution", coFloat);
@@ -2118,7 +2118,7 @@ void PrintConfigDef::init_fff_params()
     def->label = L("Retract amount before wipe");
     def->tooltip = L("The length of fast retraction before wipe, relative to retraction length");
     def->sidetext = L("%");
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionPercents { 100 });
 
     def = this->add("retract_when_changing_layer", coBools);
@@ -2157,21 +2157,21 @@ void PrintConfigDef::init_fff_params()
     def->set_default_value(new ConfigOptionFloats { 0.4 });
 
     def = this->add("retract_restart_extra", coFloats);
-    //def->label = L("Extra length on restart");
+    def->label = L("Extra length on restart");
     def->label = "Extra length on restart";
-    //def->tooltip = L("When the retraction is compensated after the travel move, the extruder will push "
-    //               "this additional amount of filament. This setting is rarely needed.");
+    def->tooltip = L("When the retraction is compensated after the travel move, the extruder will push "
+                  "this additional amount of filament. This setting is rarely needed.");
     def->sidetext = L("mm");
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionFloats { 0. });
 
     def = this->add("retract_restart_extra_toolchange", coFloats);
-    //def->label = L("Extra length on restart");
+    def->label = L("Extra length on restart");
     def->label = "Extra length on restart";
-    //def->tooltip = L("When the retraction is compensated after changing tool, the extruder will push "
-    //               "this additional amount of filament.");
+    def->tooltip = L("When the retraction is compensated after changing tool, the extruder will push "
+                  "this additional amount of filament.");
     def->sidetext = L("mm");
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionFloats { 0. });
 
     def = this->add("retraction_speed", coFloats);
@@ -2422,7 +2422,7 @@ void PrintConfigDef::init_fff_params()
     def->sidetext = L("°");
     def->min = 0;
     def->max = 359;
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->set_default_value(new ConfigOptionFloat(0));
 
     def = this->add("support_on_build_plate_only", coBool);
@@ -2876,7 +2876,7 @@ void PrintConfigDef::init_fff_params()
     def->label = L("Flush multiplier");
     def->tooltip = L("");
     def->sidetext = L("");
-    def->mode = comDevelop;
+    def->mode = comAdvanced;
     def->min = 0;
     def->set_default_value(new ConfigOptionFloat(1.0));
 
@@ -2998,8 +2998,6 @@ void PrintConfigDef::init_fff_params()
         if ((strcmp(opt_key, "retraction_length") == 0) ||
             (strcmp(opt_key, "z_hop") == 0))
             def->mode       = comSimple;
-        else if (strcmp(opt_key, "retract_before_wipe") == 0)
-            def->mode       = comDevelop;
         else
             def->mode       = comAdvanced;
         switch (def->type) {

src/slic3r/GUI/AboutDialog.cpp

@@ -245,7 +245,7 @@ AboutDialog::AboutDialog()
     {
         vesizer->Add(0, FromDIP(165), 1, wxEXPAND, FromDIP(5));
 
-        auto version_string = _L("SoftFever Version") + " " + std::string(SLIC3R_VERSION);
+        auto version_string = _L("SoftFever Version") + " " + std::string(SoftFever_VERSION);
         wxStaticText* version = new wxStaticText(this, wxID_ANY, version_string.c_str(), wxDefaultPosition, wxDefaultSize);
         wxFont version_font = GetFont();
         #ifdef __WXMSW__

src/slic3r/GUI/BackgroundSlicingProcess.cpp

@@ -183,6 +183,13 @@ std::string BackgroundSlicingProcess::output_filepath_for_project(const boost::f
 void BackgroundSlicingProcess::process_fff()
 {
 	assert(m_print == m_fff_print);
+	PresetBundle &preset_bundle = *wxGetApp().preset_bundle;
+
+	m_fff_print->is_BBL_printer() =
+            preset_bundle.printers.get_edited_preset().is_bbl_vendor_preset(
+                &preset_bundle);
+        
+
 	//BBS: add the logic to process from an existed gcode file
 	if (m_print->finished()) {
 		BOOST_LOG_TRIVIAL(info) << __FUNCTION__ << boost::format(" %1%: skip slicing, to process previous gcode file")%__LINE__;

src/slic3r/GUI/Plater.cpp

@@ -918,10 +918,23 @@ void Sidebar::update_all_preset_comboboxes()
         ams_btn->Show();
         //update print button default value for bbl or third-party printer
         wxGetApp().mainframe->set_print_button_to_default(MainFrame::PrintSelectType::ePrintPlate);
+        MonitorPanel *curr_monitor = wxGetApp().mainframe->m_monitor;
+        if(wxGetApp().mainframe->m_tabpanel->GetPage(3) !=
+            curr_monitor){
+        wxGetApp().mainframe->m_tabpanel->InsertPage(3,
+            curr_monitor, _L("Device"),
+                            std::string("tab_monitor_active"),
+                            std::string("tab_monitor_active"));
+        }
+
     } else {
         connection_btn->Show();
         ams_btn->Hide();
         wxGetApp().mainframe->set_print_button_to_default(MainFrame::PrintSelectType::eSendGcode);
+        MonitorPanel *curr_monitor = wxGetApp().mainframe->m_monitor;
+        if (wxGetApp().mainframe->m_tabpanel->GetPage(3) == curr_monitor) {
+          wxGetApp().mainframe->m_tabpanel->RemovePage(3);
+        }
     }
 
     // Update the print choosers to only contain the compatible presets, update the dirty flags.

version.inc

@@ -11,4 +11,4 @@ if(NOT DEFINED BBL_INTERNAL_TESTING)
 set(BBL_INTERNAL_TESTING "1")
 endif()
 set(SLIC3R_VERSION "01.03.00.12")
-set(SoftFever_VERSION "1.3.0")
+set(SoftFever_VERSION "1.3.1")