feat(profiles): add Lulzbot Mini 1 (#15476)

Adds the LulzBot Mini 1 (single extruder, 0.5 mm nozzle, 2.85 mm filament)
to the existing Lulzbot vendor, which previously shipped only TAZ models.

Values are taken from LulzBot's own current slicer configuration
(github.com/lulzbot3d/CuraLE) rather than estimated:

  - geometry and custom g-code from resources/definitions/single_mini_mini_1.def.json
    and resources/gcodes/mini_1/{mini_1_start,mini_1_end}.gcode
  - filament temperatures and cooling from resources/materials/*.xml.fdm_material,
    overridden by resources/quality/single_mini/<material>/*.inst.cfg

The start g-code reproduces the Mini's nozzle wipe and four-washer G29 probe,
with the filament-type temperature conditionals used by the sibling TAZ profiles.

One deliberate departure from current CuraLE: the pre-wipe retract is 30 mm,
the value used by Cura LE 4.13.x, rather than the 4 mm current CuraLE uses.
The Mini probes by electrical contact between nozzle and washer, so the nozzle
must stay clean through the wipe and all four touches. At 4 mm the melt zone
stays full and can ooze onto a washer, which caused auto-levelling failures on
hardware; 30 mm empties it. The cost is a ~24 s purge at print start.

The three filament presets follow docs/HLSD/filament_id.md rule 4: a vendor
tuning a generic material inherits Generic X @System, keeps the Generic X base
name and declares no filament_id, so identity stays with OrcaFilamentLibrary.
Their compatible_printers is the Mini alone, disjoint from Generic X @Lulzbot
(TAZ only) as rule 3 requires. They exist because temperature is a filament-scope
setting, so LulzBot's values need printer-scoped presets. All six plate types
carry the same temperature, because the Mini has a single bed and curr_bed_type
can hold a stale value carried over from another printer.

Strictly additive: no existing profile is modified, so TAZ behaviour is
unchanged and no migration is required. Lulzbot.json is bumped to 02.04.00.05.

Verified with scripts/orca_profile_tool.py check and scripts/check_profile.sh
on the full tree (profile tool, system validation, slice, filament subtypes and
custom-preset fixtures all pass), by diffing sliced output against LulzBot's own
Cura LE g-code for the same model and filament (temps, retraction, speeds and
the full wipe/probe sequence match), and by printing a 3DBenchy on a Mini 1 over
OctoPrint.


Claude-Session: https://claude.ai/code/session_012aLyqsXB7FKqwQdE2QF7Et

Co-authored-by: Claude Opus 5 <noreply@anthropic.com>
Co-authored-by: SoftFever <103989404+SoftFever@users.noreply.github.com>

.claude/skills/orca-profiles/references/naming.md

@@ -35,9 +35,10 @@ toolhead, a multi-material build) may drop the suffix — still an exact referen
 ## `process`
 
 `<layer height>mm <quality> @<target>` — [process-profiles.md](process-profiles.md#naming) has the
-quality ladder and the `fdm_process_*` base names. The `@<target>` is a human label, not a reference: it
+quality ladder and the `fdm_process_*` base names. The quality label stays before `@` and the printer
-usually does not equal a real variant, and compatibility comes from the resolved `compatible_printers`
+target after it: a printer model in the quality slot leaves the tier undescribed. The `@<target>` is a
-list or condition.
+human label, not a reference: it usually does not equal a real variant, and compatibility comes from the
+resolved `compatible_printers` list or condition.
 
 ## `filament`
 
@@ -58,6 +59,30 @@ to the first `@`; the target half is a label except for reserved forms:
   chosen at runtime
   ([color is a runtime property](filament-profiles.md#color-is-a-runtime-property)).
 
+## Checking names
+
+Check every newly added profile's `name` against its type and role: model, selectable preset or base.
+Apply the same checks to an intentional name change. The human-readable naming shapes are not enforced
+by `check`: inspect the added or renamed profiles in the diff, using neighbouring names as context and
+following the bundle's established style where the type-specific conventions allow variation.
+
+For bases (`instantiation: "false"`), use the type-specific conventions:
+
+| Type | Base names |
+| --- | --- |
+| `machine` | `fdm_machine_common`, `fdm_<vendor>_common`, or an established machine-family base name |
+| `process` | `fdm_process_*`, including shared roots and per-layer-height / per-nozzle bases such as `fdm_process_single_0.20` |
+| `filament` | `fdm_filament_*` material roots or `<Product> @base` product roots |
+
+Shared base names across bundles are intentional, including product roots such as `Fiberon PA6-CF @base`.
+Investigate a newly authored base that retains an unrelated selectable preset's name from a copy.
+
+**Name uniqueness is checked by CI.** `check_preset_name_uniqueness` checks type + name within each
+bundle. `check_machine_model_name_uniqueness` checks model names across the entire tree, even with
+`--vendor`: `Preset::get_printer_type` matches `printer_model` against all vendors' models and returns
+the first match, so a duplicate makes lookup depend on vendor order. Both run as part of
+`python3 scripts/orca_profile_tool.py check`.
+
 ## Not the same as the filename
 
 The loader keys off `name`, and a filename that disagrees usually still loads. Index `name` must equal the

.claude/skills/orca-profiles/references/review-checklist.md

@@ -17,6 +17,7 @@ The table highlights gaps that need human review. What CI *does* run:
 | A `renamed_from` whose old name is still a live preset | The redirect is inert while a live preset carries that name |
 | A preset differentiated only by color, or an all-printer library preset without `@System` | Per-color presets split one product across ids and the selector fills with near-duplicates; CI stays green |
 | Per-extruder vector length on a multi-nozzle printer | Silently padded (with the **first** value) or truncated |
+| A name that ignores its type's convention — a model in a `process` quality slot, or an unrelated target label left in a copied preset | The selector misrepresents the preset's quality or intended printer |
 
 ## 1. Was the vendor `version` bumped?
 
@@ -169,6 +170,15 @@ vendor, and a filename that disagrees with the preset's `name` (common; the load
 Check for Windows-invalid characters, reserved device names, trailing path-component spaces/dots,
 and case mismatches in `sub_path` or asset paths. See [cross-platform paths](validation.md#cross-platform-paths).
 
+## 16. Do the preset names follow the conventions?
+
+Check **every newly added profile and intentional name change**, including models and bases,
+against [the naming conventions](naming.md#checking-names). Preserve shipped names during
+ordinary tuning; renaming a shipped selectable preset requires the migration in item 4.
+
+*Why:* CI checks name uniqueness, but does not enforce the naming conventions. Catch naming
+mistakes before the names ship and existing projects depend on them.
+
 ---
 
 ## Reporting the review

resources/profiles/Anker/machine/fdm_marlin_common.json

@@ -6,6 +6,7 @@
 	"instantiation": "false",
 	"gcode_flavor": "marlin2",
 	"before_layer_change_gcode": ";BEFORE_LAYER_CHANGE\nG92 E0.0\n;[layer_z]\n\n",
+	"file_start_gcode": ";TIME:{print_time_sec}s",
 	"machine_start_gcode": "M4899 T3 ; Enable v3 jerk and S-curve acceleration \nM104 S150 ; Set hotend temp to 150 degrees to prevent ooze\nM190 S{first_layer_bed_temperature[0]} ; set and wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; set final nozzle temp to stabilize\nG28 ;Home\n;LAYER_COUNT:{total_layer_count}",
 	"machine_end_gcode": "M104 S0\nM140 S0\n;Retract the filament\nG92 E1\nG1 E-1 F300\nG28 X0 Y0\nM18",
 	"change_filament_gcode": "M600",

resources/profiles/Anycubic.json

@@ -1,6 +1,6 @@
 {
 	"name": "Anycubic",
-	"version": "02.04.00.05",
+	"version": "02.04.00.07",
 	"force_update": "0",
 	"description": "Anycubic configurations",
 	"machine_model_list": [
@@ -48,6 +48,10 @@
 			"name": "Anycubic Kobra 3 Max",
 			"sub_path": "machine/Anycubic Kobra 3 Max.json"
 		},
+		{
+			"name": "Anycubic Kobra 3 V2",
+			"sub_path": "machine/Anycubic Kobra 3 V2.json"
+		},
 		{
 			"name": "Anycubic Kobra Max",
 			"sub_path": "machine/Anycubic Kobra Max.json"
@@ -102,6 +106,10 @@
 			"name": "0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.08mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
 			"sub_path": "process/0.08mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
@@ -118,6 +126,10 @@
 			"name": "0.10mm Detail @Anycubic Kobra 3 0.2 nozzle",
 			"sub_path": "process/0.10mm Detail @Anycubic Kobra 3 0.2 nozzle.json"
 		},
+		{
+			"name": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
+			"sub_path": "process/0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle.json"
+		},
 		{
 			"name": "0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
 			"sub_path": "process/0.10mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
@@ -142,6 +154,10 @@
 			"name": "0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.12mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle",
 			"sub_path": "process/0.12mm Standard @Anycubic Kobra S1 Max 0.25 nozzle.json"
@@ -214,6 +230,10 @@
 			"name": "0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.16mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle",
 			"sub_path": "process/0.16mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
@@ -286,6 +306,10 @@
 			"name": "0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.20mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle",
 			"sub_path": "process/0.20mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
@@ -342,6 +366,10 @@
 			"name": "0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle",
 			"sub_path": "process/0.24mm Standard @Anycubic Kobra S1 Max 0.4 nozzle.json"
@@ -370,6 +398,10 @@
 			"name": "0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "process/0.28mm Standard @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle",
 			"sub_path": "process/0.28mm Standard @Anycubic Kobra Neo 0.4 nozzle.json"
@@ -426,6 +458,10 @@
 			"name": "0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle",
 			"sub_path": "process/0.30mm Standard @Anycubic Kobra 3 Max 0.6 nozzle.json"
 		},
+		{
+			"name": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "process/0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
 		{
 			"name": "0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle",
 			"sub_path": "process/0.30mm Standard @Anycubic Kobra S1 Max 0.6 nozzle.json"
@@ -454,6 +490,10 @@
 			"name": "0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "process/0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
 			"sub_path": "process/0.40mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
@@ -477,6 +517,34 @@
 		{
 			"name": "0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle",
 			"sub_path": "process/0.56mm Standard @Anycubic Kobra S1 Max 0.8 nozzle.json"
+		},
+		{
+			"name": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "process/0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "process/0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "process/0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "process/0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
+		{
+			"name": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "process/0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json"
 		}
 	],
 	"filament_list": [
@@ -528,6 +596,10 @@
 			"name": "Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic ABS @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic ABS @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic ABS @Anycubic Kobra S1 0.4 nozzle.json"
@@ -564,6 +636,10 @@
 			"name": "Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic ASA @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic ASA @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic ASA @Anycubic Kobra S1 0.4 nozzle.json"
@@ -704,6 +780,10 @@
 			"name": "Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PETG @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra S1 0.4 nozzle.json"
@@ -768,6 +848,22 @@
 			"name": "Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra S1 0.4 nozzle.json"
@@ -792,6 +888,22 @@
 			"name": "Anycubic PLA @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra X 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Glow @Anycubic Kobra X 0.4 nozzle.json"
@@ -800,6 +912,10 @@
 			"name": "Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA High Speed @Anycubic Kobra S1 0.4 nozzle.json"
@@ -824,10 +940,26 @@
 			"name": "Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Luminous @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra S1 Max 0.4 nozzle.json"
@@ -844,10 +976,30 @@
 			"name": "Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Matte @Anycubic Kobra X 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 Max 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra S1 0.4 nozzle.json"
@@ -868,6 +1020,10 @@
 			"name": "Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra X 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA Translucent @Anycubic Kobra S1 Max 0.4 nozzle.json"
@@ -980,6 +1136,10 @@
 			"name": "Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "filament/Anycubic TPU @Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "filament/Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
 		{
 			"name": "Anycubic TPU @Anycubic Kobra S1 0.4 nozzle",
 			"sub_path": "filament/Anycubic TPU @Anycubic Kobra S1 0.4 nozzle.json"
@@ -1016,6 +1176,22 @@
 			"name": "Anycubic PETG @Anycubic Kobra 3 0.4 nozzle",
 			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 0.4 nozzle.json"
 		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
+		{
+			"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle",
 			"sub_path": "filament/Anycubic PLA @Anycubic Kobra 2 Max 0.4 nozzle.json"
@@ -1174,6 +1350,22 @@
 			"name": "Anycubic Kobra 3 Max 0.8 nozzle",
 			"sub_path": "machine/Anycubic Kobra 3 Max 0.8 nozzle.json"
 		},
+		{
+			"name": "Anycubic Kobra 3 V2 0.2 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 V2 0.2 nozzle.json"
+		},
+		{
+			"name": "Anycubic Kobra 3 V2 0.4 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 V2 0.4 nozzle.json"
+		},
+		{
+			"name": "Anycubic Kobra 3 V2 0.6 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 V2 0.6 nozzle.json"
+		},
+		{
+			"name": "Anycubic Kobra 3 V2 0.8 nozzle",
+			"sub_path": "machine/Anycubic Kobra 3 V2 0.8 nozzle.json"
+		},
 		{
 			"name": "Anycubic Kobra Max 0.4 nozzle",
 			"sub_path": "machine/Anycubic Kobra Max 0.4 nozzle.json"

resources/profiles/Anycubic/filament/Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_abs",
+	"from": "system",
+	"setting_id": "LXkKhWH9YcYPr3IT",
+	"filament_id": "OF223rZv",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic ABS @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"ABS"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"5"
+	],
+	"nozzle_temperature": [
+		"250"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"15"
+	],
+	"fan_min_speed": [
+		"1"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"0"
+	],
+	"filament_density": [
+		"1.05"
+	],
+	"filament_deretraction_speed": [
+		"80"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"70%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"80"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"100"
+	],
+	"hot_plate_temp": [
+		"90"
+	],
+	"hot_plate_temp_initial_layer": [
+		"90"
+	],
+	"nozzle_temperature_initial_layer": [
+		"250"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"15"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"16"
+	],
+	"slow_down_min_speed": [
+		"25"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"90"
+	],
+	"textured_plate_temp_initial_layer": [
+		"90"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_asa",
+	"from": "system",
+	"setting_id": "cWBQa7XzDl3czIOs",
+	"filament_id": "OF0yFLkY",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic ASA @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"ASA"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"270"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"15"
+	],
+	"fan_min_speed": [
+		"1"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"30"
+	],
+	"filament_density": [
+		"1.04"
+	],
+	"filament_deretraction_speed": [
+		"80"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"70%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"80"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"100"
+	],
+	"hot_plate_temp": [
+		"100"
+	],
+	"hot_plate_temp_initial_layer": [
+		"100"
+	],
+	"nozzle_temperature_initial_layer": [
+		"270"
+	],
+	"nozzle_temperature_range_high": [
+		"280"
+	],
+	"nozzle_temperature_range_low": [
+		"240"
+	],
+	"overhang_fan_speed": [
+		"15"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"16"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"110"
+	],
+	"textured_plate_temp": [
+		"100"
+	],
+	"textured_plate_temp_initial_layer": [
+		"100"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pet",
+	"from": "system",
+	"setting_id": "suyxKj9qKLtpBhhU",
+	"filament_id": "OFo6n2pB",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PETG @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"5"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"20"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"15"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"0"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"80"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"80%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"80"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"6"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"90"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"25"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"70"
+	],
+	"textured_plate_temp_initial_layer": [
+		"70"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,69 @@
+{
+	"type": "filament",
+	"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
+	"from": "system",
+	"setting_id": "0uOqeEk5YgyZH4Yy",
+	"filament_id": "OFo6n2pB",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PETG @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"8"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"close_fan_the_first_x_layers": [
+		"3"
+	],
+	"fan_cooling_layer_time": [
+		"30"
+	],
+	"fan_min_speed": [
+		"10"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"75"
+	],
+	"hot_plate_temp_initial_layer": [
+		"75"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"260"
+	],
+	"nozzle_temperature_range_low": [
+		"210"
+	],
+	"overhang_fan_speed": [
+		"80"
+	],
+	"overhang_fan_threshold": [
+		"10%"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"temperature_vitrification": [
+		"70"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,42 @@
+{
+	"type": "filament",
+	"name": "Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
+	"from": "system",
+	"setting_id": "OOOjWFMFhP1fMhFf",
+	"filament_id": "OFo6n2pB",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PETG @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PETG"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"hot_plate_temp": [
+		"70"
+	],
+	"hot_plate_temp_initial_layer": [
+		"70"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "uJRZr6orTVm79FeE",
+	"filament_id": "OFmjN2bc",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"1.6"
+	],
+	"nozzle_temperature": [
+		"230"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.2 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "udLvkeYZ9Av7GkDz",
+	"filament_id": "OFmjN2bc",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "W69H1Vca3f74FfYj",
+	"filament_id": "OFmjN2bc",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "TR27JCwXxHeVhVHN",
+	"filament_id": "OFmjN2bc",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.6"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"60"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "i0FTxiH68CKHiLLT",
+	"filament_id": "OF80Qbpq",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,258 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "XHa1HSjh0RjAo0nz",
+	"filament_id": "OF80Qbpq",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,261 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "iRVPFxNMEfkCDnMh",
+	"filament_id": "OF80Qbpq",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Galaxy @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_max_speed_BRASS": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"fan_min_speed_BRASS": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "itTckVFabfsVbNBK",
+	"filament_id": "OF5PtjTp",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA Glow @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"40"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"2"
+	],
+	"filament_retraction_speed": [
+		"60"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"2"
+	],
+	"filament_z_hop": [
+		"0.4"
+	],
+	"filament_z_hop_types": [
+		"Auto Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"9"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "YLxoiuRDXBWLQYw4",
+	"filament_id": "OFjVOWfJ",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA High Speed @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"18"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"nil"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"2"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.035"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"7"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "JwcCfY4XVCRJaDeS",
+	"filament_id": "OFCSyK66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"nil"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "Sjw7irNgwCZMfWS3",
+	"filament_id": "OFCSyK66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"50"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "HeQwxU4T2W1V0LM3",
+	"filament_id": "OFCSyK66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Marble @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"nozzle_temperature_initial_layer": [
+		"210"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.035"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "H3PIqeTzjvtFQXYv",
+	"filament_id": "OFIE3vOf",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA Matte @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.98"
+	],
+	"filament_max_volumetric_speed": [
+		"9"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"0"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "4zmGMIi6jHJhU4c6",
+	"filament_id": "OF5F0S66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Metal @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"100"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "wLkJ1CJgdWnT4NoJ",
+	"filament_id": "OF5F0S66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Metal @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.94"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"50"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "kkcDxmDe6F9fwhoJ",
+	"filament_id": "OF5F0S66",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Metal @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_max_speed": [
+		"60"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"Slope Lift"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"205"
+	],
+	"nozzle_temperature_initial_layer": [
+		"215"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.035"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "QRl3zpmacQ8D8aNX",
+	"filament_id": "OFCp3Bgo",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA SE @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.97"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.8"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"14"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "qF5SGZKoINokZfx2",
+	"filament_id": "OFFwJWea",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic PLA Silk @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"filament_flow_ratio": [
+		"0.95"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"nil"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"0.5"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"30"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"65"
+	],
+	"textured_plate_temp_initial_layer": [
+		"65"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,51 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle",
+	"from": "system",
+	"setting_id": "6aUrszW2Dj8CNYIp",
+	"filament_id": "OFFwJWea",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Silk @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_speed": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"pressure_advance": [
+		"0.025"
+	],
+	"slow_down_layer_time": [
+		"10"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,51 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle",
+	"from": "system",
+	"setting_id": "f8K19ebfxiXji84y",
+	"filament_id": "OFFwJWea",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Silk @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"7.2"
+	],
+	"nozzle_temperature": [
+		"220"
+	],
+	"enable_pressure_advance": [
+		"1"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_speed": [
+		"80"
+	],
+	"hot_plate_temp": [
+		"65"
+	],
+	"hot_plate_temp_initial_layer": [
+		"65"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"pressure_advance": [
+		"0.025"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,273 @@
+{
+	"type": "filament",
+	"name": "Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_pla",
+	"from": "system",
+	"setting_id": "NTs7c6NqAudTl9wk",
+	"filament_id": "OF7c9fln",
+	"instantiation": "true",
+	"filament_settings_id": [
+		"Anycubic PLA Translucent @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_type": [
+		"PLA"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_flow_ratio": [
+		"0.96"
+	],
+	"filament_max_volumetric_speed": [
+		"12"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"dont_slow_down_outer_wall": [
+		"1"
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"80"
+	],
+	"fan_cooling_layer_time_BRASS": [
+		"100"
+	],
+	"fan_max_speed": [
+		"80"
+	],
+	"fan_max_speed_BRASS": [
+		"100"
+	],
+	"fan_min_speed": [
+		"60"
+	],
+	"fan_min_speed_BRASS": [
+		"70"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"20"
+	],
+	"filament_density": [
+		"1.24"
+	],
+	"filament_deretraction_speed": [
+		"40"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"nil"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"nil"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"1.2"
+	],
+	"filament_retraction_minimum_travel": [
+		"nil"
+	],
+	"filament_retraction_speed": [
+		"40"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"nil"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"0"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"nozzle_temperature_BRASS": [
+		"205"
+	],
+	"nozzle_temperature_initial_layer": [
+		"220"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"50%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"0"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_layer_time_BRASS": [
+		"10"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/filament/Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "filament",
+	"name": "Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_filament_tpu",
+	"from": "system",
+	"setting_id": "oSWtTJpng3ERixPJ",
+	"filament_id": "OFMsDGbs",
+	"instantiation": "true",
+	"filament_vendor": [
+		"Anycubic"
+	],
+	"filament_settings_id": [
+		"Anycubic TPU @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"filament_type": [
+		"TPU"
+	],
+	"filament_flow_ratio": [
+		"1"
+	],
+	"filament_max_volumetric_speed": [
+		"3.2"
+	],
+	"nozzle_temperature": [
+		"210"
+	],
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"activate_air_filtration": [
+		"0"
+	],
+	"activate_chamber_temp_control": [
+		"0"
+	],
+	"additional_cooling_fan_speed": [
+		"0"
+	],
+	"bed_type": [
+		"High Temp Plate"
+	],
+	"chamber_temperature": [
+		"0"
+	],
+	"close_fan_the_first_x_layers": [
+		"1"
+	],
+	"compatible_printers_condition": "",
+	"compatible_prints": [],
+	"compatible_prints_condition": "",
+	"complete_print_exhaust_fan_speed": [
+		"80"
+	],
+	"cool_plate_temp": [
+		"35"
+	],
+	"cool_plate_temp_initial_layer": [
+		"35"
+	],
+	"default_filament_colour": [
+		""
+	],
+	"during_print_exhaust_fan_speed": [
+		"60"
+	],
+	"enable_overhang_bridge_fan": [
+		"1"
+	],
+	"enable_pressure_advance": [
+		"0"
+	],
+	"eng_plate_temp": [
+		"0"
+	],
+	"eng_plate_temp_initial_layer": [
+		"0"
+	],
+	"fan_cooling_layer_time": [
+		"100"
+	],
+	"fan_max_speed": [
+		"100"
+	],
+	"fan_min_speed": [
+		"80"
+	],
+	"filament_cooling_final_speed": [
+		"0"
+	],
+	"filament_cooling_initial_speed": [
+		"0"
+	],
+	"filament_cooling_moves": [
+		"0"
+	],
+	"filament_cost": [
+		"0"
+	],
+	"filament_density": [
+		"1.23"
+	],
+	"filament_deretraction_speed": [
+		"25"
+	],
+	"filament_diameter": [
+		"1.75"
+	],
+	"filament_end_gcode": [
+		"; filament end gcode\n"
+	],
+	"filament_is_support": [
+		"0"
+	],
+	"filament_loading_speed": [
+		"0"
+	],
+	"filament_loading_speed_start": [
+		"0"
+	],
+	"filament_long_retractions_when_cut": [
+		"nil"
+	],
+	"filament_minimal_purge_on_wipe_tower": [
+		"15"
+	],
+	"filament_multitool_ramming": [
+		"0"
+	],
+	"filament_multitool_ramming_flow": [
+		"0"
+	],
+	"filament_multitool_ramming_volume": [
+		"0"
+	],
+	"filament_notes": [
+		""
+	],
+	"filament_ramming_parameters": [
+		"120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
+	],
+	"filament_retract_before_wipe": [
+		"0%"
+	],
+	"filament_retract_lift_above": [
+		"nil"
+	],
+	"filament_retract_lift_below": [
+		"nil"
+	],
+	"filament_retract_lift_enforce": [
+		"nil"
+	],
+	"filament_retract_restart_extra": [
+		"nil"
+	],
+	"filament_retract_when_changing_layer": [
+		"1"
+	],
+	"filament_retraction_distances_when_cut": [
+		"nil"
+	],
+	"filament_retraction_length": [
+		"2"
+	],
+	"filament_retraction_minimum_travel": [
+		"1"
+	],
+	"filament_retraction_speed": [
+		"35"
+	],
+	"filament_shrink": [
+		"100%"
+	],
+	"filament_soluble": [
+		"0"
+	],
+	"filament_start_gcode": [
+		"; filament start gcode"
+	],
+	"filament_toolchange_delay": [
+		"0"
+	],
+	"filament_unloading_speed": [
+		"0"
+	],
+	"filament_unloading_speed_start": [
+		"0"
+	],
+	"filament_wipe": [
+		"1"
+	],
+	"filament_wipe_distance": [
+		"nil"
+	],
+	"filament_z_hop": [
+		"nil"
+	],
+	"filament_z_hop_types": [
+		"nil"
+	],
+	"full_fan_speed_layer": [
+		"3"
+	],
+	"hot_plate_temp": [
+		"60"
+	],
+	"hot_plate_temp_initial_layer": [
+		"60"
+	],
+	"nozzle_temperature_initial_layer": [
+		"230"
+	],
+	"nozzle_temperature_range_high": [
+		"230"
+	],
+	"nozzle_temperature_range_low": [
+		"190"
+	],
+	"overhang_fan_speed": [
+		"100"
+	],
+	"overhang_fan_threshold": [
+		"95%"
+	],
+	"pressure_advance": [
+		"0.05"
+	],
+	"reduce_fan_stop_start_freq": [
+		"1"
+	],
+	"required_nozzle_HRC": [
+		"0"
+	],
+	"slow_down_for_layer_cooling": [
+		"1"
+	],
+	"slow_down_layer_time": [
+		"8"
+	],
+	"slow_down_min_speed": [
+		"20"
+	],
+	"support_material_interface_fan_speed": [
+		"-1"
+	],
+	"temperature_vitrification": [
+		"60"
+	],
+	"textured_plate_temp": [
+		"60"
+	],
+	"textured_plate_temp_initial_layer": [
+		"60"
+	]
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.2 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "machine",
+	"name": "Anycubic Kobra 3 V2 0.2 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "gaQ37xRo6J467j1y",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra 3 V2 0.2 nozzle",
+	"printer_model": "Anycubic Kobra 3 V2",
+	"printer_variant": "0.2",
+	"nozzle_diameter": [
+		"0.2"
+	],
+	"default_print_profile": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"0x0",
+		"255x0",
+		"255x255",
+		"0x255"
+	],
+	"printable_height": "260",
+	"thumbnails": [
+		"230x110"
+	],
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": [
+		"512x512/PNG/top"
+	],
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"40"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "250",
+	"extruder_clearance_height_to_rod": "20",
+	"extruder_clearance_radius": "65",
+	"extruder_colour": [
+		"FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "G92 E0\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
+	"machine_load_filament_time": "42",
+	"machine_max_acceleration_e": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_extruding": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"1000",
+		"1000",
+		"1000"
+	],
+	"machine_max_jerk_e": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_x": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_y": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_z": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_speed_e": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_z": [
+		"15",
+		"10",
+		"26"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M600",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.14"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "107",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_flush_multiplier": "1",
+	"printer_notes": "",
+	"printer_structure": "i3",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0.3"
+	],
+	"retract_lift_below": [
+		"258"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"0"
+	],
+	"retraction_length": [
+		"0.8"
+	],
+	"retraction_minimum_travel": [
+		"0"
+	],
+	"retraction_speed": [
+		"40"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"1"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0"
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,251 @@
+{
+	"type": "machine",
+	"name": "Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "l49qdfdrHYEO04bV",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra 3 V2 0.4 nozzle",
+	"printer_model": "Anycubic Kobra 3 V2",
+	"printer_variant": "0.4",
+	"nozzle_diameter": [
+		"0.4"
+	],
+	"default_print_profile": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"0x0",
+		"255x0",
+		"255x255",
+		"0x255"
+	],
+	"printable_height": "260",
+	"thumbnails": "230x110/PNG",
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": "512x512/PNG/top",
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"60"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "250",
+	"extruder_clearance_height_to_rod": "20",
+	"extruder_clearance_radius": "65",
+	"extruder_colour": [
+		"FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M400\nG92 E0 ; zero the extruder\nG1 E-2 F3600\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F900 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors",
+	"machine_load_filament_time": "42",
+	"machine_max_acceleration_e": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_extruding": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"1000",
+		"1000",
+		"1000"
+	],
+	"machine_max_jerk_e": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_x": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_y": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_z": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_speed_e": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_z": [
+		"15",
+		"10",
+		"26"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M600",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.28"
+	],
+	"min_layer_height": [
+		"0.08"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "107",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_flush_multiplier": "1",
+	"printer_notes": "",
+	"printer_structure": "i3",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"259"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"0"
+	],
+	"retraction_length": [
+		"1"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"60"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "0",
+	"support_chamber_temp_control": "0",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"2"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Slope Lift"
+	],
+	"z_offset": "0"
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,251 @@
+{
+	"type": "machine",
+	"name": "Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "hQQgQT5HeCVGpBAL",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra 3 V2 0.6 nozzle",
+	"printer_model": "Anycubic Kobra 3 V2",
+	"printer_variant": "0.6",
+	"nozzle_diameter": [
+		"0.6"
+	],
+	"default_print_profile": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"0x0",
+		"255x0",
+		"255x255",
+		"0x255"
+	],
+	"printable_height": "260",
+	"thumbnails": "230x110/PNG",
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": "512x512/PNG/top",
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"30"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "250",
+	"extruder_clearance_height_to_rod": "20",
+	"extruder_clearance_radius": "65",
+	"extruder_colour": [
+		"FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-1 F3600 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
+	"machine_load_filament_time": "42",
+	"machine_max_acceleration_e": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_extruding": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"1000",
+		"1000",
+		"1000"
+	],
+	"machine_max_jerk_e": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_x": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_y": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_z": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_speed_e": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_z": [
+		"15",
+		"10",
+		"26"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M600",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.05\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.42"
+	],
+	"min_layer_height": [
+		"0.12"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "107",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_flush_multiplier": "1",
+	"printer_notes": "",
+	"printer_structure": "i3",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0"
+	],
+	"retract_lift_below": [
+		"259"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"0"
+	],
+	"retraction_length": [
+		"0.8"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"30"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"2"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0"
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,255 @@
+{
+	"type": "machine",
+	"name": "Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_machine_common",
+	"from": "system",
+	"setting_id": "LBhbohm7o4jW6OYw",
+	"instantiation": "true",
+	"printer_technology": "FFF",
+	"printer_settings_id": "Anycubic Kobra 3 V2 0.8 nozzle",
+	"printer_model": "Anycubic Kobra 3 V2",
+	"printer_variant": "0.8",
+	"nozzle_diameter": [
+		"0.8"
+	],
+	"default_print_profile": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"default_filament_profile": [
+		"Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"disable_m73": "0",
+	"gcode_flavor": "klipper",
+	"printable_area": [
+		"0x0",
+		"255x0",
+		"255x255",
+		"0x255"
+	],
+	"printable_height": "260",
+	"thumbnails": [
+		"230x110"
+	],
+	"thumbnails_format": "PNG",
+	"thumbnails_internal": [
+		"512x512/PNG/top"
+	],
+	"thumbnails_internal_switch": "1",
+	"adaptive_bed_mesh_margin": "0",
+	"auxiliary_fan": "0",
+	"bbl_use_printhost": "0",
+	"bed_custom_model": "",
+	"bed_custom_texture": "",
+	"bed_exclude_area": [],
+	"bed_mesh_max": "0,0",
+	"bed_mesh_min": "0,0",
+	"bed_mesh_probe_distance": "0,0",
+	"before_layer_change_gcode": "; BEFORE_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"best_object_pos": "0.5,0.5",
+	"change_extrusion_role_gcode": "",
+	"change_filament_gcode": "; FLUSH_START\n;;; M400 P0\nT[next_extruder] ; change extruder\n; 1\n;;; G1 E-2 F2400\n;;; G1 Z{max(toolchange_z+0.6, 5.0)} F600\n;;; G1 X271.5 F12000\n;;; G1 E-5 F600\n;;; G1 X278 F600\n;;; M400 P3530\n;;; G1 E-1 F600\n;;; G1 Z{max(toolchange_z+2.6, 7.0)}  F600\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P31050\n;;; M400 P17510\n; 2\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n;;; G1 X250 F1200\n;;; M400 P0\n;;; G1 X278 F18000\n;;; G1 X271.5 F1200\n;;; G1 E2 F300\n;;; M400 P0\n; 3.1\n;;; M106 S255\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.2\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n; 3.3\n;;; G1 X36 Y260 Z-0.8 F9600\n;;; G1 X50 Y260 Z1 F9600\n;;; G1 X86 Y260 Z1 F9600\n;;; G1 X90 Y260 Z-0.8 F9600\n;;; G1 X90 Y259 Z-0.8 F9600\n;;; G1 X86 Y259 Z1 F9600\n;;; G1 X50 Y259 Z1 F9600\n;;; G1 X36 Y259 Z-0.8 F9600\n;;; G1 Z{toolchange_z}\n;;; M400 P0\n; FLUSH_END",
+	"cooling_tube_length": "0",
+	"cooling_tube_retraction": "0",
+	"deretraction_speed": [
+		"0"
+	],
+	"emit_machine_limits_to_gcode": "1",
+	"enable_filament_ramming": "0",
+	"enable_long_retraction_when_cut": "0",
+	"extra_loading_move": "0",
+	"extruder_clearance_height_to_lid": "250",
+	"extruder_clearance_height_to_rod": "20",
+	"extruder_clearance_radius": "65",
+	"extruder_colour": [
+		"FF4D4F"
+	],
+	"extruder_offset": [
+		"0x0"
+	],
+	"fan_kickstart": "0",
+	"fan_speedup_overhangs": "1",
+	"fan_speedup_time": "0",
+	"head_wrap_detect_zone": [],
+	"high_current_on_filament_swap": "0",
+	"host_type": "octoprint",
+	"layer_change_gcode": "; AFTER_LAYER_CHANGE [layer_num] @ [layer_z]mm",
+	"long_retractions_when_cut": [
+		"0"
+	],
+	"machine_end_gcode": "M400 ; wait for buffer to clear\nG92 E0 ; zero the extruder\nG1 E-2 F3000 ; retract\n{if max_layer_z < max_print_height-1}G1 Z{max_layer_z+2} F600 ; Move print head further up{endif}\nG1 X250 Y220 F12000 ; present print\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107;turn off fan\nM84; disable motors\n; disable stepper motors\n\n",
+	"machine_load_filament_time": "42",
+	"machine_max_acceleration_e": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_extruding": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_retracting": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_travel": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_x": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_y": [
+		"20000",
+		"20000",
+		"20000"
+	],
+	"machine_max_acceleration_z": [
+		"1000",
+		"1000",
+		"1000"
+	],
+	"machine_max_jerk_e": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_x": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_y": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_jerk_z": [
+		"20",
+		"20",
+		"20"
+	],
+	"machine_max_speed_e": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_x": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_y": [
+		"600",
+		"300",
+		"780"
+	],
+	"machine_max_speed_z": [
+		"15",
+		"10",
+		"26"
+	],
+	"machine_min_extruding_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_min_travel_rate": [
+		"0",
+		"0",
+		"0"
+	],
+	"machine_pause_gcode": "M600",
+	"machine_start_gcode": "G9111 bedTemp=[first_layer_bed_temperature] extruderTemp=[first_layer_temperature[initial_tool]]\nM117\nM900 K0.051\n; print_bed_min = {print_bed_min[0]},{print_bed_min[1]}\n; print_bed_max = {print_bed_max[0]},{print_bed_max[1]}\n; print_bed_size = {print_bed_size[0]},{print_bed_size[1]}\n; first_layer_print_min = {first_layer_print_min[0]},{first_layer_print_min[1]}\n; first_layer_print_max = {first_layer_print_max[0]},{first_layer_print_max[1]}\n; first_layer_print_size = {first_layer_print_size[0]},{first_layer_print_size[1]}",
+	"machine_tool_change_time": "0",
+	"machine_unload_filament_time": "0",
+	"manual_filament_change": "0",
+	"max_layer_height": [
+		"0.56"
+	],
+	"min_layer_height": [
+		"0.16"
+	],
+	"nozzle_height": "4",
+	"nozzle_hrc": "0",
+	"nozzle_type": "brass",
+	"nozzle_volume": "107",
+	"parking_pos_retraction": "0",
+	"pellet_modded_printer": "0",
+	"preferred_orientation": "0",
+	"printer_flush_multiplier": "1",
+	"printer_notes": "",
+	"printer_structure": "i3",
+	"printhost_authorization_type": "key",
+	"printhost_ssl_ignore_revoke": "0",
+	"printing_by_object_gcode": "",
+	"purge_in_prime_tower": "0",
+	"retract_before_wipe": [
+		"0%"
+	],
+	"retract_length_toolchange": [
+		"0"
+	],
+	"retract_lift_above": [
+		"0.3"
+	],
+	"retract_lift_below": [
+		"259.6"
+	],
+	"retract_lift_enforce": [
+		"All Surfaces"
+	],
+	"retract_on_top_layer": [
+		"1"
+	],
+	"retract_restart_extra": [
+		"0"
+	],
+	"retract_restart_extra_toolchange": [
+		"0"
+	],
+	"retract_when_changing_layer": [
+		"1"
+	],
+	"retraction_distances_when_cut": [
+		"0"
+	],
+	"retraction_length": [
+		"1"
+	],
+	"retraction_minimum_travel": [
+		"1"
+	],
+	"retraction_speed": [
+		"40"
+	],
+	"scan_first_layer": "0",
+	"single_extruder_multi_material": "1",
+	"support_air_filtration": "1",
+	"support_chamber_temp_control": "1",
+	"support_multi_bed_types": "1",
+	"template_custom_gcode": "",
+	"time_cost": "0",
+	"time_lapse_gcode": "",
+	"travel_slope": [
+		"3"
+	],
+	"upward_compatible_machine": [],
+	"use_firmware_retraction": "0",
+	"use_relative_e_distances": "1",
+	"wipe": [
+		"1"
+	],
+	"wipe_distance": [
+		"2"
+	],
+	"z_hop": [
+		"0.4"
+	],
+	"z_hop_types": [
+		"Auto Lift"
+	],
+	"z_offset": "0"
+}

resources/profiles/Anycubic/machine/Anycubic Kobra 3 V2.json

@@ -0,0 +1,12 @@
+{
+    "type": "machine_model",
+    "machine_tech": "FFF",
+    "family": "Anycubic",
+    "name": "Anycubic Kobra 3 V2",
+    "model_id": "Anycubic Kobra 3 V2",
+    "nozzle_diameter": "0.4;0.2;0.6;0.8",
+    "bed_model": "Anycubic Kobra 3 V2_buildplate_model.stl",
+    "bed_texture": "Anycubic Kobra 3 V2_buildplate_texture.svg",
+    "hotend_model": "",
+    "default_materials": "Anycubic PLA @Anycubic Kobra 3 V2 0.2 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.4 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.6 nozzle;Anycubic PLA @Anycubic Kobra 3 V2 0.8 nozzle"
+}

resources/profiles/Anycubic/process/0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "9yiDozcVDSxKkz4V",
+	"instantiation": "true",
+	"print_settings_id": "0.08mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.08",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "7",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "1",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "250",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "350",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "200",
+	"ironing_angle": "-1",
+	"ironing_flow": "8%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "3",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "200",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "30",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "10000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "450",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.08",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "15",
+	"support_top_z_distance": "0.08",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "9",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "200",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "eSyZsnWMuOyokoLr",
+	"instantiation": "true",
+	"print_settings_id": "0.10mm Standard @Anycubic Kobra 3 V2 0.2 nozzle",
+	"layer_height": "0.1",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.2 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "50%",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "outer_only",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "10",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.075",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "0",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "100",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "10",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "30",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.25",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.1",
+	"initial_layer_speed": "30",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "10",
+	"inner_wall_line_width": "0.22",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "100%",
+	"internal_solid_infill_line_width": "0.22",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "120",
+	"ironing_angle": "-1",
+	"ironing_flow": "15%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.22",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "10",
+	"outer_wall_line_width": "0.22",
+	"outer_wall_speed": "80",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "2",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "100%",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "20",
+	"seam_slope_start_height": "0",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "100%",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.22",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "150",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.1",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.5",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.22",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "40",
+	"support_top_z_distance": "0.1",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "7",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.22",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "120",
+	"travel_acceleration": "15000",
+	"travel_jerk": "12",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "4",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,58 @@
+{
+	"type": "process",
+	"name": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"from": "system",
+	"setting_id": "HqXRokM0mAA691LV",
+	"instantiation": "true",
+	"print_settings_id": "0.12mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.12",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"bottom_shell_thickness": "0",
+	"bridge_acceleration": "2000",
+	"bridge_speed": "30",
+	"brim_type": "auto_brim",
+	"default_acceleration": "5000",
+	"default_jerk": "9",
+	"gap_infill_speed": "180",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_speed": "50",
+	"inner_wall_acceleration": "4000",
+	"inner_wall_jerk": "9",
+	"inner_wall_speed": "150",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_speed": "180",
+	"ironing_flow": "10%",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_speed": "60",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "30",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"prime_tower_width": "35",
+	"raft_first_layer_expansion": "5",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"seam_slope_conditional": "1",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"small_perimeter_speed": "50%",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_speed": "180",
+	"support_interface_top_layers": "2",
+	"support_threshold_angle": "20",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_speed": "150",
+	"travel_acceleration": "5000",
+	"travel_jerk": "9",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wipe_on_loops": "0",
+	"wipe_tower_extra_spacing": "120%"
+}

resources/profiles/Anycubic/process/0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "NCKx6glFcaEOhqZC",
+	"instantiation": "true",
+	"print_settings_id": "0.12mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.12",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "5",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "350",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "300",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "200",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "130",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "30",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "30%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "10000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "430",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.12",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "20",
+	"support_top_z_distance": "0.12",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "0.6",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "200",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,51 @@
+{
+	"type": "process",
+	"name": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"from": "system",
+	"setting_id": "mVDCX89vYKfBA57g",
+	"instantiation": "true",
+	"print_settings_id": "0.16mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.16",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"bottom_shell_thickness": "0",
+	"bridge_acceleration": "2000",
+	"default_acceleration": "4000",
+	"default_jerk": "9",
+	"infill_anchor_max": "20",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_speed": "50",
+	"inner_wall_acceleration": "4000",
+	"inner_wall_jerk": "9",
+	"internal_solid_infill_acceleration": "4000",
+	"internal_solid_infill_speed": "200",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_speed": "150",
+	"overhang_1_4_speed": "60",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"prime_tower_width": "30",
+	"raft_first_layer_expansion": "5",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"seam_slope_conditional": "1",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"small_perimeter_speed": "50%",
+	"sparse_infill_acceleration": "4000",
+	"sparse_infill_speed": "200",
+	"support_line_width": "0.42",
+	"support_threshold_angle": "25",
+	"top_bottom_infill_wall_overlap": "15%",
+	"travel_acceleration": "4000",
+	"travel_jerk": "9",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wipe_on_loops": "0",
+	"wipe_tower_extra_spacing": "120%"
+}

resources/profiles/Anycubic/process/0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "ut3FZjM7h3doFjRg",
+	"instantiation": "true",
+	"print_settings_id": "0.16mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.16",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "4",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "250",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "200",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "10000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "130",
+	"overhang_1_4_speed": "60",
+	"overhang_2_4_speed": "30",
+	"overhang_3_4_speed": "10",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "30%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "300",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.16",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "25",
+	"support_top_z_distance": "0.16",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "6",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,57 @@
+{
+	"type": "process",
+	"name": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"from": "system",
+	"setting_id": "V7T6yBxuQzWucCpA",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm High Quality @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.2",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"bottom_shell_thickness": "0",
+	"bridge_acceleration": "4000",
+	"bridge_speed": "50",
+	"brim_object_gap": "0.1",
+	"brim_width": "5",
+	"default_acceleration": "4000",
+	"default_jerk": "9",
+	"initial_layer_infill_speed": "50",
+	"initial_layer_speed": "50",
+	"inner_wall_acceleration": "4000",
+	"inner_wall_jerk": "9",
+	"inner_wall_speed": "150",
+	"internal_solid_infill_acceleration": "4000",
+	"internal_solid_infill_speed": "250",
+	"ironing_flow": "10%",
+	"outer_wall_acceleration": "2000",
+	"outer_wall_jerk": "9",
+	"outer_wall_speed": "60",
+	"overhang_4_4_speed": "10",
+	"prime_tower_width": "30",
+	"raft_first_layer_expansion": "5",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"seam_slope_conditional": "1",
+	"seam_slope_inner_walls": "1",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"sparse_infill_acceleration": "4000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "270",
+	"support_line_width": "0.42",
+	"support_threshold_angle": "30",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_speed": "200",
+	"travel_acceleration": "4000",
+	"travel_jerk": "9",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wipe_on_loops": "0",
+	"wipe_tower_extra_spacing": "120%"
+}

resources/profiles/Anycubic/process/0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "K5se4jnf2XHJNkEQ",
+	"instantiation": "true",
+	"print_settings_id": "0.20mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.2",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "250",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "200",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "10000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "130",
+	"ironing_angle": "-1",
+	"ironing_flow": "15%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "130",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "30%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "300",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.4",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "30",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "0",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "5",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "130",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "cg8f6Q9o8nRePSC9",
+	"instantiation": "true",
+	"print_settings_id": "0.24mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.24",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "200",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "10",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "200",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "10000",
+	"internal_solid_infill_line_width": "0.45",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "200",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "30%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "200",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "35",
+	"support_top_z_distance": "0.2",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "15%",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "180",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,24 @@
+{
+	"type": "process",
+	"name": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"from": "system",
+	"setting_id": "DhqKrBJZh4W22xna",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.24mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"layer_height": "0.24",
+	"brim_type": "auto_brim",
+	"default_acceleration": "6000",
+	"default_jerk": "9",
+	"elefant_foot_compensation": "0.1",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"outer_wall_jerk": "9",
+	"raft_first_layer_expansion": "5",
+	"sparse_infill_acceleration": "6000",
+	"support_threshold_angle": "30",
+	"top_bottom_infill_wall_overlap": "15%",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9"
+}

resources/profiles/Anycubic/process/0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "Qe8XQonRxfA8Jei1",
+	"instantiation": "true",
+	"print_settings_id": "0.28mm Standard @Anycubic Kobra 3 V2 0.4 nozzle",
+	"layer_height": "0.28",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.4 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "2000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "auto_brim",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "10000",
+	"default_jerk": "9",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "200",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "20",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "45",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.5",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.2",
+	"initial_layer_speed": "45",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"inner_wall_line_width": "0.45",
+	"inner_wall_speed": "200",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "10000",
+	"internal_solid_infill_line_width": "0.42",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "180",
+	"ironing_angle": "-1",
+	"ironing_flow": "10%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.42",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "15",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "9",
+	"outer_wall_line_width": "0.42",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "30",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "0%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "5",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "30",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "10%",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "30%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.45",
+	"sparse_infill_pattern": "grid",
+	"sparse_infill_speed": "200",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "100%",
+	"support_interface_top_layers": "2",
+	"support_line_width": "0.42",
+	"support_object_xy_distance": "60%",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "40",
+	"support_top_z_distance": "0.2",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "4",
+	"top_shell_thickness": "1",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.42",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "180",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "120%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "13ES5eks7VTR3G2E",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"layer_height": "0.3",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.6 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "500",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "outer_only",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "5000",
+	"default_jerk": "20",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "0",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.075",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "10",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "30",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.62",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.3",
+	"initial_layer_speed": "30",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "10000",
+	"inner_wall_jerk": "15",
+	"inner_wall_line_width": "0.62",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "5000",
+	"internal_solid_infill_line_width": "0.62",
+	"internal_solid_infill_pattern": "monotonic",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "15%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.62",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "0",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "15",
+	"outer_wall_line_width": "0.62",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "15",
+	"overhang_4_4_speed": "10",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "2",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "35",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "1",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "10",
+	"seam_slope_start_height": "0",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "10000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.62",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "100",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.62",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "40",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.6",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "5000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.62",
+	"top_surface_pattern": "monotonicline",
+	"top_surface_speed": "150",
+	"travel_acceleration": "15000",
+	"travel_jerk": "12",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "0.8",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "150%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,17 @@
+{
+	"type": "process",
+	"name": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"from": "system",
+	"setting_id": "avPzsOBN3DnXTaol",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.32mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"layer_height": "0.32",
+	"initial_layer_print_height": "0.32",
+	"inner_wall_speed": "120",
+	"outer_wall_speed": "80",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "30",
+	"top_solid_infill_flow_ratio": "0.95"
+}

resources/profiles/Anycubic/process/0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle.json

@@ -0,0 +1,24 @@
+{
+	"type": "process",
+	"name": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"inherits": "0.30mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"from": "system",
+	"setting_id": "7pIVSig189FDjOMY",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.36mm Standard @Anycubic Kobra 3 V2 0.6 nozzle",
+	"layer_height": "0.36",
+	"brim_type": "auto_brim",
+	"default_acceleration": "6000",
+	"default_jerk": "9",
+	"elefant_foot_compensation": "0.1",
+	"inner_wall_acceleration": "6000",
+	"inner_wall_jerk": "9",
+	"outer_wall_jerk": "9",
+	"raft_first_layer_expansion": "5",
+	"sparse_infill_acceleration": "6000",
+	"support_threshold_angle": "30",
+	"top_bottom_infill_wall_overlap": "15%",
+	"travel_acceleration": "10000",
+	"travel_jerk": "9"
+}

resources/profiles/Anycubic/process/0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,289 @@
+{
+	"type": "process",
+	"name": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "fdm_process_common",
+	"from": "system",
+	"setting_id": "0yxg7c5tH07ZMIL4",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"layer_height": "0.4",
+	"compatible_printers": [
+		"Anycubic Kobra 3 V2 0.8 nozzle"
+	],
+	"accel_to_decel_enable": "1",
+	"accel_to_decel_factor": "50%",
+	"alternate_extra_wall": "0",
+	"bottom_shell_layers": "3",
+	"bottom_shell_thickness": "0",
+	"bottom_solid_infill_flow_ratio": "1",
+	"bottom_surface_pattern": "monotonic",
+	"bridge_acceleration": "5000",
+	"bridge_angle": "0",
+	"bridge_density": "100%",
+	"bridge_flow": "0.9",
+	"bridge_no_support": "0",
+	"bridge_speed": "30",
+	"brim_ears_detection_length": "1",
+	"brim_ears_max_angle": "125",
+	"brim_object_gap": "0.15",
+	"brim_type": "outer_only",
+	"brim_width": "5",
+	"compatible_printers_condition": "",
+	"counterbore_hole_bridging": "none",
+	"default_acceleration": "6000",
+	"default_jerk": "20",
+	"detect_narrow_internal_solid_infill": "1",
+	"detect_overhang_wall": "1",
+	"detect_thin_wall": "1",
+	"dont_filter_internal_bridges": "disabled",
+	"draft_shield": "disabled",
+	"elefant_foot_compensation": "0.1",
+	"elefant_foot_compensation_layers": "1",
+	"enable_arc_fitting": "0",
+	"enable_overhang_speed": "1",
+	"enable_prime_tower": "1",
+	"enable_support": "0",
+	"enforce_support_layers": "0",
+	"ensure_vertical_shell_thickness": "ensure_all",
+	"exclude_object": "1",
+	"extra_perimeters_on_overhangs": "1",
+	"filter_out_gap_fill": "0",
+	"flush_into_infill": "0",
+	"flush_into_objects": "0",
+	"flush_into_support": "1",
+	"fuzzy_skin": "none",
+	"fuzzy_skin_first_layer": "0",
+	"fuzzy_skin_point_distance": "0.8",
+	"fuzzy_skin_thickness": "0.3",
+	"gap_fill_target": "topbottom",
+	"gap_infill_speed": "50",
+	"gcode_add_line_number": "0",
+	"gcode_comments": "0",
+	"gcode_label_objects": "1",
+	"hole_to_polyhole": "0",
+	"hole_to_polyhole_threshold": "0.01",
+	"hole_to_polyhole_twisted": "1",
+	"independent_support_layer_height": "1",
+	"infill_anchor": "400",
+	"infill_anchor_max": "10",
+	"infill_combination": "0",
+	"infill_direction": "45",
+	"infill_jerk": "9",
+	"infill_wall_overlap": "15%",
+	"initial_layer_acceleration": "500",
+	"initial_layer_infill_speed": "30",
+	"initial_layer_jerk": "9",
+	"initial_layer_line_width": "0.82",
+	"initial_layer_min_bead_width": "85%",
+	"initial_layer_print_height": "0.4",
+	"initial_layer_speed": "30",
+	"initial_layer_travel_speed": "100%",
+	"inner_wall_acceleration": "0",
+	"inner_wall_jerk": "15",
+	"inner_wall_line_width": "0.82",
+	"inner_wall_speed": "150",
+	"interface_shells": "0",
+	"internal_bridge_flow": "1",
+	"internal_bridge_speed": "150%",
+	"internal_solid_infill_acceleration": "10000",
+	"internal_solid_infill_line_width": "0.82",
+	"internal_solid_infill_pattern": "zig-zag",
+	"internal_solid_infill_speed": "150",
+	"ironing_angle": "-1",
+	"ironing_flow": "15%",
+	"ironing_pattern": "zig-zag",
+	"ironing_spacing": "0.1",
+	"ironing_speed": "15",
+	"ironing_type": "no ironing",
+	"is_infill_first": "0",
+	"line_width": "0.82",
+	"make_overhang_printable": "0",
+	"make_overhang_printable_angle": "55",
+	"make_overhang_printable_hole_size": "0",
+	"max_bridge_length": "10",
+	"max_travel_detour_distance": "0",
+	"max_volumetric_extrusion_rate_slope": "0",
+	"max_volumetric_extrusion_rate_slope_segment_length": "5",
+	"min_bead_width": "85%",
+	"min_feature_size": "25%",
+	"min_length_factor": "0.5",
+	"min_width_top_surface": "300%",
+	"minimum_sparse_infill_area": "0",
+	"mmu_segmented_region_interlocking_depth": "0",
+	"mmu_segmented_region_max_width": "0",
+	"notes": "",
+	"only_one_wall_first_layer": "0",
+	"only_one_wall_top": "1",
+	"ooze_prevention": "0",
+	"outer_wall_acceleration": "5000",
+	"outer_wall_jerk": "15",
+	"outer_wall_line_width": "0.82",
+	"outer_wall_speed": "120",
+	"overhang_1_4_speed": "0",
+	"overhang_2_4_speed": "50",
+	"overhang_3_4_speed": "25",
+	"overhang_4_4_speed": "5",
+	"overhang_reverse": "0",
+	"overhang_reverse_internal_only": "0",
+	"overhang_reverse_threshold": "50%",
+	"post_process": [],
+	"precise_outer_wall": "0",
+	"precise_z_height": "0",
+	"prime_tower_brim_width": "5",
+	"prime_tower_width": "35",
+	"prime_volume": "20",
+	"print_flow_ratio": "1",
+	"print_order": "default",
+	"print_sequence": "by layer",
+	"raft_contact_distance": "0.1",
+	"raft_expansion": "1.5",
+	"raft_first_layer_density": "90%",
+	"raft_first_layer_expansion": "2",
+	"raft_layers": "0",
+	"reduce_crossing_wall": "0",
+	"reduce_infill_retraction": "1",
+	"resolution": "0.012",
+	"role_based_wipe_speed": "1",
+	"rotate_solid_infill_direction": "1",
+	"scarf_angle_threshold": "155",
+	"scarf_joint_flow_ratio": "1",
+	"scarf_joint_speed": "100%",
+	"scarf_overhang_threshold": "40%",
+	"seam_gap": "10%",
+	"seam_position": "aligned",
+	"seam_slope_conditional": "0",
+	"seam_slope_entire_loop": "0",
+	"seam_slope_inner_walls": "0",
+	"seam_slope_min_length": "20",
+	"seam_slope_start_height": "0",
+	"seam_slope_steps": "10",
+	"seam_slope_type": "none",
+	"single_extruder_multi_material_priming": "0",
+	"skirt_distance": "2",
+	"skirt_height": "1",
+	"skirt_loops": "0",
+	"skirt_speed": "50",
+	"slice_closing_radius": "0.049",
+	"slicing_mode": "regular",
+	"slow_down_layers": "1",
+	"slowdown_for_curled_perimeters": "0",
+	"small_area_infill_flow_compensation": "0",
+	"small_area_infill_flow_compensation_model": [
+		"0,0",
+		"\n0.2,0.4444",
+		"\n0.4,0.6145",
+		"\n0.6,0.7059",
+		"\n0.8,0.7619",
+		"\n1.5,0.8571",
+		"\n2,0.8889",
+		"\n3,0.9231",
+		"\n5,0.9520",
+		"\n10,1"
+	],
+	"small_perimeter_speed": "50%",
+	"small_perimeter_threshold": "0",
+	"solid_infill_direction": "45",
+	"solid_infill_filament": "1",
+	"sparse_infill_acceleration": "5000",
+	"sparse_infill_density": "15%",
+	"sparse_infill_filament": "1",
+	"sparse_infill_line_width": "0.82",
+	"sparse_infill_pattern": "3dhoneycomb",
+	"sparse_infill_speed": "100",
+	"spiral_mode": "0",
+	"spiral_mode_max_xy_smoothing": "200%",
+	"spiral_mode_smooth": "0",
+	"staggered_inner_seams": "0",
+	"standby_temperature_delta": "0",
+	"support_angle": "0",
+	"support_base_pattern": "default",
+	"support_base_pattern_spacing": "0.2",
+	"support_bottom_interface_spacing": "0.5",
+	"support_bottom_z_distance": "0.2",
+	"support_critical_regions_only": "0",
+	"support_expansion": "0",
+	"support_filament": "0",
+	"support_interface_bottom_layers": "-1",
+	"support_interface_filament": "0",
+	"support_interface_loop_pattern": "0",
+	"support_interface_not_for_body": "1",
+	"support_interface_pattern": "auto",
+	"support_interface_spacing": "0.2",
+	"support_interface_speed": "80",
+	"support_interface_top_layers": "3",
+	"support_line_width": "0.82",
+	"support_object_xy_distance": "0.35",
+	"support_on_build_plate_only": "1",
+	"support_remove_small_overhang": "1",
+	"support_speed": "100",
+	"support_style": "default",
+	"support_threshold_angle": "40",
+	"support_top_z_distance": "0.25",
+	"support_type": "tree(auto)",
+	"thick_bridges": "0",
+	"thick_internal_bridges": "1",
+	"timelapse_type": "0",
+	"top_bottom_infill_wall_overlap": "25%",
+	"top_shell_layers": "3",
+	"top_shell_thickness": "0.8",
+	"top_solid_infill_flow_ratio": "0.97",
+	"top_surface_acceleration": "2000",
+	"top_surface_jerk": "9",
+	"top_surface_line_width": "0.82",
+	"top_surface_pattern": "monotonic",
+	"top_surface_speed": "150",
+	"travel_acceleration": "10000",
+	"travel_jerk": "12",
+	"travel_speed": "350",
+	"travel_speed_z": "0",
+	"tree_support_adaptive_layer_height": "1",
+	"tree_support_angle_slow": "25",
+	"tree_support_auto_brim": "1",
+	"tree_support_branch_angle": "40",
+	"tree_support_branch_angle_organic": "40",
+	"tree_support_branch_diameter": "5",
+	"tree_support_branch_diameter_angle": "5",
+	"tree_support_branch_diameter_double_wall": "3",
+	"tree_support_branch_diameter_organic": "2",
+	"tree_support_branch_distance": "5",
+	"tree_support_branch_distance_organic": "1",
+	"tree_support_brim_width": "3",
+	"tree_support_tip_diameter": "1.5",
+	"tree_support_top_rate": "30%",
+	"tree_support_wall_count": "0",
+	"wall_direction": "auto",
+	"wall_distribution_count": "1",
+	"wall_filament": "1",
+	"wall_generator": "classic",
+	"wall_infill_order": "inner wall/outer wall/infill",
+	"wall_loops": "2",
+	"wall_sequence": "inner wall/outer wall",
+	"wall_transition_angle": "10",
+	"wall_transition_filter_deviation": "25%",
+	"wall_transition_length": "100%",
+	"wipe_before_external_loop": "0",
+	"wipe_on_loops": "0",
+	"wipe_speed": "80%",
+	"wipe_tower_bridging": "10",
+	"wipe_tower_cone_angle": "15",
+	"wipe_tower_extra_spacing": "150%",
+	"wipe_tower_extruder": "0",
+	"wipe_tower_max_purge_speed": "90",
+	"wipe_tower_no_sparse_layers": "0",
+	"wipe_tower_rotation_angle": "0",
+	"wiping_volumes_extruders": [
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70",
+		"70"
+	],
+	"xy_contour_compensation": "0",
+	"xy_hole_compensation": "0"
+}

resources/profiles/Anycubic/process/0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle.json

@@ -0,0 +1,17 @@
+{
+	"type": "process",
+	"name": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"inherits": "0.40mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"from": "system",
+	"setting_id": "2cCCPfRX7H33XrMb",
+	"instantiation": "true",
+	"filename_format": "{timestamp}-{if plate_name==\"\" then input_filename_base+\"_plate\" else plate_name endif}{\"(\"+plate_number+\")\"}_{filament_type[initial_tool]}_{layer_height}_{print_time}.gcode",
+	"print_settings_id": "0.48mm Standard @Anycubic Kobra 3 V2 0.8 nozzle",
+	"layer_height": "0.48",
+	"initial_layer_print_height": "0.48",
+	"inner_wall_speed": "180",
+	"outer_wall_speed": "140",
+	"overhang_2_4_speed": "40",
+	"overhang_3_4_speed": "30",
+	"top_solid_infill_flow_ratio": "0.95"
+}

resources/profiles/BBL.json

@@ -1,7 +1,7 @@
 {
 	"name": "Bambulab",
 	"url": "http://www.bambulab.com/Parameters/vendor/BBL.json",
-	"version": "02.01.00.28",
+	"version": "02.01.00.29",
 	"force_update": "0",
 	"description": "BBL configurations",
 	"machine_model_list": [

resources/profiles/CoLiDo.json

@@ -1,6 +1,6 @@
 {
 	"name": "CoLiDo",
-	"version": "02.04.00.05",
+	"version": "02.04.00.06",
 	"force_update": "0",
 	"description": "CoLiDo configurations",
 	"machine_model_list": [

resources/profiles/Creality.json

@@ -1,6 +1,6 @@
 {
 	"name": "Creality",
-	"version": "02.03.02.84",
+	"version": "02.03.02.85",
 	"force_update": "0",
 	"description": "Creality configurations",
 	"machine_model_list": [

resources/profiles/Creality/creality_SPARKX_buildplate_texture.svg

@@ -0,0 +1 @@
+<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 260 260"><path d="M258.54,260h-74.09c-.98,0-1.41-1.25-.62-1.85l12.39-9.46c.64-.49,1.41-.75,2.21-.75h60.11c.81,0,1.46.65,1.46,1.46v9.13c0,.81-.65,1.46-1.46,1.46ZM60.57,248.53c.67,0,1.33.22,1.86.63l12.39,9.46c.24.18.18.43.15.5-.02.07-.13.31-.43.31H18.89c-.49,0-.95-.27-1.19-.69l-5.37-9.4c-.14-.24-.04-.46,0-.54.05-.08.19-.27.47-.27h47.78M61.57,247.95H11.79c-.86,0-1.39.93-.97,1.67l5.37,9.4c.35.61.99.98,1.7.98h57.66c.98,0,1.41-1.25.62-1.85l-12.39-9.46c-.64-.49-1.41-.75-2.21-.75h0Z" style="fill:#bcbec0;"/><path d="M206.02,251.67s-.02.05-.05.05l-4.24.02c-1.25,0-2.26,1.03-2.25,2.28.02,1.24,1.05,2.22,2.28,2.22h4.21s.05.02.05.05v1.33s-.02.05-.05.05h-4.2c-2.08,0-3.78-1.71-3.72-3.79.06-1.94,1.62-3.51,3.55-3.57l4.37-.02s.05.02.05.05v1.33ZM214.8,257.67h-1.88s-.03,0-.03-.01l-4.31-4.32s0-.08.03-.08h3.78c.43,0,.78-.36.77-.8-.02-.42-.37-.74-.79-.74h-3.96s-.05.02-.05.05v5.85s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-7.29s.02-.05.05-.05h5.37c1.21,0,2.21.96,2.23,2.17.02,1.23-.97,2.23-2.19,2.23h-.45s2.89,2.9,2.89,2.9c.03.03,0,.08-.03.08ZM223.18,251.67s-.02.05-.05.05h-4.14c-1,0-1.84.65-2.15,1.54h6.28s.05.02.05.05v1.33s-.02.05-.05.05h-6.28c.3.9,1.15,1.54,2.15,1.54h4.14s.05.02.05.05v1.33s-.02.05-.05.05h-4.14c-2.04,0-3.7-1.66-3.7-3.69s1.66-3.69,3.7-3.69h4.14s.05.02.05.05v1.33ZM232.48,257.67c-.6,0-4.28,0-5.53,0-.02-.03-.02-.04-.04-.08l.77-1.33s.03-.02.04-.02h2.28s.02-.04.04-.08l-1.75-3.04h-.09l-2.61,4.52s-.03.02-.04.03h-1.53s-.02-.04-.04-.08l4.18-7.26c.04-.06.13-.06.17,0,0,0,3.73,6.48,4.18,7.26.02.03,0,.07-.04.07ZM239.25,257.62s-.02.05-.05.05h-5.3c-.45,0-.82-.37-.82-.83v-6.51s.02-.05.05-.05h1.33s.05.02.05.05v5.85s.02.05.05.05h4.64s.05.02.05.05v1.33ZM241.51,257.62s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-7.28s.02-.05.05-.05h1.33s.05.02.05.05v7.28ZM253.52,254.72s-.01.02-.01.03v2.86s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-2.86s0-.02-.01-.03l-2.51-2.99s-.02-.02-.04-.02h-2.89s-.05.02-.05.05v5.85s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-5.85s-.02-.05-.05-.05h-2.88s-.05-.02-.05-.05v-1.33s.02-.05.05-.05h7.96s.03,0,.04.02l2.53,3.02s.05.02.07,0l2.53-3.02s.02-.02.04-.02h1.74s.06.05.04.08l-3.65,4.36Z" style="fill:#393939;"/><path d="M6.64,248.53c.44,0,.84.23,1.06.62l4.83,8.44c.22.38.22.84,0,1.22s-.62.61-1.06.61H1.81c-.44,0-.84-.23-1.06-.61s-.22-.84,0-1.22l4.83-8.44c.22-.39.62-.62,1.06-.62M6.64,247.95c-.61,0-1.22.3-1.57.91l-4.83,8.44c-.69,1.2.18,2.7,1.57,2.7h9.67c1.39,0,2.25-1.5,1.57-2.7l-4.83-8.44c-.35-.61-.96-.91-1.57-.91h0Z" style="fill:#bcbec0;"/><path d="M8.03,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M6.75,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M5.49,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M2.59,258.11h8.09M9.87,257.04H3.5M4.28,256.05h4.82" style="fill:none; stroke:#bcbec0; stroke-linecap:round; stroke-miterlimit:10; stroke-width:.61px;"/></svg>

resources/profiles/Creality/creality_ender3v4_buildplate_texture.svg

@@ -0,0 +1 @@
+<?xml version="1.0" encoding="UTF-8"?><svg id="a" xmlns="http://www.w3.org/2000/svg" viewBox="0 0 260 260"><path d="M258.54,260h-74.09c-.98,0-1.41-1.25-.62-1.85l12.39-9.46c.64-.49,1.41-.75,2.21-.75h60.11c.81,0,1.46.65,1.46,1.46v9.13c0,.81-.65,1.46-1.46,1.46ZM60.57,248.53c.67,0,1.33.22,1.86.63l12.39,9.46c.24.18.18.43.15.5-.02.07-.13.31-.43.31H18.89c-.49,0-.95-.27-1.19-.69l-5.37-9.4c-.14-.24-.04-.46,0-.54.05-.08.19-.27.47-.27h47.78M61.57,247.95H11.79c-.86,0-1.39.93-.97,1.67l5.37,9.4c.35.61.99.98,1.7.98h57.66c.98,0,1.41-1.25.62-1.85l-12.39-9.46c-.64-.49-1.41-.75-2.21-.75h0Z" style="fill:#bcbec0;"/><path d="M206.02,251.67s-.02.05-.05.05l-4.24.02c-1.25,0-2.26,1.03-2.25,2.28.02,1.24,1.05,2.22,2.28,2.22h4.21s.05.02.05.05v1.33s-.02.05-.05.05h-4.2c-2.08,0-3.78-1.71-3.72-3.79.06-1.94,1.62-3.51,3.55-3.57l4.37-.02s.05.02.05.05v1.33ZM214.8,257.67h-1.88s-.03,0-.03-.01l-4.31-4.32s0-.08.03-.08h3.78c.43,0,.78-.36.77-.8-.02-.42-.37-.74-.79-.74h-3.96s-.05.02-.05.05v5.85s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-7.29s.02-.05.05-.05h5.37c1.21,0,2.21.96,2.23,2.17.02,1.23-.97,2.23-2.19,2.23h-.45s2.89,2.9,2.89,2.9c.03.03,0,.08-.03.08ZM223.18,251.67s-.02.05-.05.05h-4.14c-1,0-1.84.65-2.15,1.54h6.28s.05.02.05.05v1.33s-.02.05-.05.05h-6.28c.3.9,1.15,1.54,2.15,1.54h4.14s.05.02.05.05v1.33s-.02.05-.05.05h-4.14c-2.04,0-3.7-1.66-3.7-3.69s1.66-3.69,3.7-3.69h4.14s.05.02.05.05v1.33ZM232.48,257.67c-.6,0-4.28,0-5.53,0-.02-.03-.02-.04-.04-.08l.77-1.33s.03-.02.04-.02h2.28s.02-.04.04-.08l-1.75-3.04h-.09l-2.61,4.52s-.03.02-.04.03h-1.53s-.02-.04-.04-.08l4.18-7.26c.04-.06.13-.06.17,0,0,0,3.73,6.48,4.18,7.26.02.03,0,.07-.04.07ZM239.25,257.62s-.02.05-.05.05h-5.3c-.45,0-.82-.37-.82-.83v-6.51s.02-.05.05-.05h1.33s.05.02.05.05v5.85s.02.05.05.05h4.64s.05.02.05.05v1.33ZM241.51,257.62s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-7.28s.02-.05.05-.05h1.33s.05.02.05.05v7.28ZM253.52,254.72s-.01.02-.01.03v2.86s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-2.86s0-.02-.01-.03l-2.51-2.99s-.02-.02-.04-.02h-2.89s-.05.02-.05.05v5.85s-.02.05-.05.05h-1.33s-.05-.02-.05-.05v-5.85s-.02-.05-.05-.05h-2.88s-.05-.02-.05-.05v-1.33s.02-.05.05-.05h7.96s.03,0,.04.02l2.53,3.02s.05.02.07,0l2.53-3.02s.02-.02.04-.02h1.74s.06.05.04.08l-3.65,4.36Z" style="fill:#393939;"/><path d="M6.64,248.53c.44,0,.84.23,1.06.62l4.83,8.44c.22.38.22.84,0,1.22s-.62.61-1.06.61H1.81c-.44,0-.84-.23-1.06-.61s-.22-.84,0-1.22l4.83-8.44c.22-.39.62-.62,1.06-.62M6.64,247.95c-.61,0-1.22.3-1.57.91l-4.83,8.44c-.69,1.2.18,2.7,1.57,2.7h9.67c1.39,0,2.25-1.5,1.57-2.7l-4.83-8.44c-.35-.61-.96-.91-1.57-.91h0Z" style="fill:#bcbec0;"/><path d="M8.03,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M6.75,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M5.49,251.42c-.67.48-.7,1.14-.09,1.98.6.83.55,1.43-.15,1.81M2.59,258.11h8.09M9.87,257.04H3.5M4.28,256.05h4.82" style="fill:none; stroke:#bcbec0; stroke-linecap:round; stroke-miterlimit:10; stroke-width:.61px;"/></svg>

resources/profiles/Creality/filament/CR-ABS @K2 Plus-all.json

@@ -46,7 +46,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"10"
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/CR-PETG @K2 Plus-all.json

@@ -40,7 +40,7 @@
 		"14"
 	],
 	"filament_density": [
-		"1.23"
+		"1.24"
 	],
 	"filament_flow_ratio": [
 		"0.95"
@@ -49,10 +49,10 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"12"
+		"18"
 	],
 	"filament_retraction_length": [
-		"0.8"
+		"1.2"
 	],
 	"filament_type": [
 		"PETG"
@@ -67,10 +67,10 @@
 		"70"
 	],
 	"nozzle_temperature": [
-		"250"
+		"240"
 	],
 	"nozzle_temperature_initial_layer": [
-		"250"
+		"240"
 	],
 	"nozzle_temperature_range_high": [
 		"270"
@@ -79,7 +79,7 @@
 		"220"
 	],
 	"overhang_fan_speed": [
-		"90"
+		"100"
 	],
 	"overhang_fan_threshold": [
 		"25%"
@@ -94,7 +94,7 @@
 		"20"
 	],
 	"temperature_vitrification": [
-		"80"
+		"60"
 	],
 	"textured_plate_temp": [
 		"70"

resources/profiles/Creality/filament/CR-PLA @K2 Plus-all.json

@@ -46,7 +46,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"16"
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/CR-PLA Fluo @K2 Plus-all.json

@@ -46,7 +46,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"16"
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/CR-PLA Matte @K2 Plus-all.json

@@ -49,7 +49,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"12"
+		"18"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/CR-Silk @K2 Plus-all.json

@@ -49,7 +49,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"12"
+		"10"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -100,10 +100,10 @@
 		"50"
 	],
 	"nozzle_temperature": [
-		"230"
+		"220"
 	],
 	"nozzle_temperature_initial_layer": [
-		"230"
+		"220"
 	],
 	"nozzle_temperature_range_high": [
 		"240"

resources/profiles/Creality/filament/ENDER FAST PLA @K2 Plus-all.json

@@ -49,7 +49,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"16"
+		"23"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -155,7 +155,7 @@
 	"filament_unloading_speed_start": "100",
 	"material_flow_dependent_temperature": "0",
 	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-	"pressure_advance": "0.05",
+	"pressure_advance": "0.04",
 	"support_material_interface_fan_speed": "-1",
 	"compatible_printers": [
 		"Creality K2 Plus 0.2 nozzle",

resources/profiles/Creality/filament/HP-ASA @K2 Plus-all.json

@@ -58,7 +58,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"10"
+		"14"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"

resources/profiles/Creality/filament/Hyper PETG @K2 Plus-all.json

@@ -40,7 +40,7 @@
 		"40"
 	],
 	"filament_cost": [
-		"24.99"
+		"25"
 	],
 	"filament_density": [
 		"1.28"
@@ -52,13 +52,13 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"18"
+		"23"
 	],
 	"filament_retract_before_wipe": [
 		"100"
 	],
 	"filament_retraction_length": [
-		"0.8"
+		"1.2"
 	],
 	"filament_type": [
 		"PETG"
@@ -97,7 +97,7 @@
 		"20"
 	],
 	"temperature_vitrification": [
-		"74.3"
+		"75"
 	],
 	"textured_plate_temp": [
 		"70"
@@ -136,7 +136,7 @@
 	"filament_unloading_speed": "90",
 	"filament_unloading_speed_start": "100",
 	"material_flow_dependent_temperature": "0",
-	"pressure_advance": "0.07",
+	"pressure_advance": "0.05",
 	"support_material_interface_fan_speed": "-1",
 	"compatible_printers": [
 		"Creality K2 Plus 0.2 nozzle",

resources/profiles/Creality/filament/Hyper PLA @K2 Plus-all.json

@@ -31,7 +31,7 @@
 		"50"
 	],
 	"filament_cost": [
-		"30"
+		"20"
 	],
 	"filament_deretraction_speed": [
 		"nil"
@@ -46,7 +46,7 @@
 		"0"
 	],
 	"filament_max_volumetric_speed": [
-		"21"
+		"23"
 	],
 	"filament_minimal_purge_on_wipe_tower": [
 		"15"
@@ -146,7 +146,7 @@
 	"filament_unloading_speed_start": "100",
 	"material_flow_dependent_temperature": "0",
 	"material_flow_temp_graph": "[[3.0,210],[10.0,220],[12.0,230]]",
-	"pressure_advance": "0.04",
+	"pressure_advance": "0.044",
 	"support_material_interface_fan_speed": "-1",
 	"compatible_printers": [
 		"Creality K2 Plus 0.2 nozzle",

resources/profiles/Creality/machine/Creality Ender-3 V4.json

@@ -2,9 +2,9 @@
 	"type": "machine_model",
 	"name": "Creality Ender-3 V4",
 	"nozzle_diameter": "0.4",
-	"bed_model": "creality_ender3v3_buildplate_model.stl",
+	"bed_model": "creality_ender3v4_buildplate_model.stl",
 	"default_bed_type": "Textured PEI Plate",
-	"bed_texture": "creality_ender3v3_buildplate_texture.svg",
+	"bed_texture": "creality_ender3v4_buildplate_texture.svg",
 	"family": "Creality",
 	"hotend_model": "",
 	"machine_tech": "FFF",

resources/profiles/Creality/machine/Creality SPARKX i7.json

@@ -4,7 +4,7 @@
 	"nozzle_diameter": "0.8;0.6;0.4;0.2",
 	"bed_model": "creality_SPARKX_buildplate_model.stl",
 	"default_bed_type": "Textured PEI Plate",
-	"bed_texture": "creality_hi_buildplate_texture.svg",
+	"bed_texture": "creality_SPARKX_buildplate_texture.svg",
 	"family": "Creality",
 	"hotend_model": "",
 	"machine_tech": "FFF",

resources/profiles/Cubicon.json

@@ -1,6 +1,6 @@
 {
 	"name": "Cubicon",
-	"version": "02.04.00.06",
+	"version": "02.04.00.07",
 	"force_update": "0",
 	"description": "Cubicon configurations",
 	"machine_model_list": [

resources/profiles/Elegoo.json

@@ -1,6 +1,6 @@
 {
 	"name": "Elegoo",
-	"version": "02.04.00.09",
+	"version": "02.04.00.10",
 	"force_update": "0",
 	"description": "Elegoo configurations",
 	"machine_model_list": [

resources/profiles/Flashforge.json

@@ -1,7 +1,7 @@
 {
 	"name": "Flashforge",
 	"url": "",
-	"version": "02.04.00.09",
+	"version": "02.04.00.10",
 	"force_update": "0",
 	"description": "Flashforge configurations",
 	"machine_model_list": [

resources/profiles/Flashforge/machine/Flashforge Creator 5 Pro.json

@@ -6,7 +6,7 @@
 	"machine_tech": "FFF",
 	"family": "Flashforge",
 	"bed_model": "flashforge_c5_buildplate_model.stl",
-	"bed_texture": "flashforge_c5_buildplate_texture.png",
+	"bed_texture": "flashforge_c5_buildplate_texture.svg",
 	"hotend_model": "",
 	"default_materials": "Generic PLA @System;Generic PLA @FF C5P"
 }

resources/profiles/Flashforge/machine/Flashforge Creator 5.json

@@ -6,7 +6,7 @@
 	"machine_tech": "FFF",
 	"family": "Flashforge",
 	"bed_model": "flashforge_c5_buildplate_model.stl",
-	"bed_texture": "flashforge_c5_buildplate_texture.png",
+	"bed_texture": "flashforge_c5_buildplate_texture.svg",
 	"hotend_model": "",
 	"default_materials": "Generic PLA @System;Generic PLA @FF C5"
 }

resources/profiles/LH.json

@@ -1,7 +1,7 @@
 {
 	"name": "LH",
 	"url": "https://github.com/lhndo/LH-Stinger",
-	"version": "02.04.00.05",
+	"version": "02.04.00.06",
 	"force_update": "0",
 	"description": "LH 3D Printer Configuration",
 	"machine_model_list": [